Aluminium Sliding Door - trendwindowsanddoors.com.au€¦ · Trend Synergy® Aluminium Sliding Door TECHNICAL DATA Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013 1 Features & Benefits
Post on 21-May-2020
24 Views
Preview:
Transcript
Trend Synergy® Aluminium
Sliding DoorTECHNICAL DATA
1Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Features & Benefits
Size Range
Ordering Details
Installation
Cross Sectional Views
2Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Features & Benefits Synergy® Sliding Door
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
1 Energy Efficiency Options To reduce energy consumption,
Thermashield® systems are available in various WERS ratings and glazing styles.
Thermashield® Double Glazing is available for energy efficiency requirements.
2 Acoustic Options SoundMizer® acoustic solutions
are available for sliding doors. SoundMizer® acoustic solutions can reduce aircraft, highway traffic, railway and other annoying noise problems. For information or technical details contact Trend®.
3 Locks Sliding doors are fitted with
standard black slimline lock or upgrade to “D” handle is optional.
4 Safety Glazing Toughened Safety A Grade Glass
with a visual motif at the mid point to provide added safety. Laminated Glass is used in all non standard door sizes. Glass sits into the extrusion door glazing pocket up to 13mm.
5 Protected Rolling Track An extruded aluminium splayed
threshold protects both glass door and flydoor rolling tracks.
6 Wheelchair Access The aluminium threshold features
the EasyriderTM sill which is ideal for wheelchair access.
7 Frames Trend® Door frame is 101.6mm
wide with standard lock. The sash has aesthetically pleasing lines and a smooth rounded profile that has a truly solid look.
Maximum Door Height is 2400mm Maximum Panel Width is 1500mm
Maximum Door Width is 6010mm
7 Interlockers Three types of interlockers are
available depending on the structural pascal ratings. Trend® Sliding Door ultimate structural rating is 1500 pascals (kPa).
9 Screen Door An external extruded aluminium sliding screen door can be fitted with spring loaded acetal wheels. Ensuring the screen door stays on the track and operates smoothly. Optional heavy duty barrier door is available.
10 Complementary Accessories• 180o non-load-bearing couplers• 135o non-load-bearing corner
couplers.• 100mm aluminium architraves
for replacement door installations.
• Adjustable aluminium storm mould.
• Extruded aluminium 180o mullion covers to hide load-bearing posts.
11 Options Colonial Bar, Federation Bar
Layouts and Ovolo adaptor are available.
Easy to fit flyscreens. Wide range of powdercoat finishes
including Timber finishes are This product rates up to BAL-29 for
bushfire areas.
3
Size Range Synergy® Sliding Door
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
All windows and doors are designed to 700pa velocity and 150pa water rating. For higher ratings consult Trend® Windows & Doors
** Refers to 2400mm frame height
4
Ordering Details Synergy® Sliding Door
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
All doors are illustrated as viewed from outside. Codes shown are for plain doors. The first two numbers of code indicate approximate height, the last two numbers indicate approximate width.
Sash Style Options:Standard option, eg door code SXD2018
O indicates ovolo sash style, eg door code TOXD2018
CL indicates colonial bar
T indicates Thermashield® double glazed sash style, eg door code STXD2018
M indicates Acoustic sash style (SoundMizer®), eg door code SMXD2018
S indicates Sump Sill, eg door code SSXD2018
Bar Options:CL indicates Colonial Bar, eg door code TXD2018CL
FD indicates Federation Bar, eg door code TXD2018FD
Configuration Options:XF indicates Sliding/FixedFX indicates Fixed/SlidingFXF indicates Fixed/Sliding/FixedFXXF indicates Fixed/Sliding/Sliding/Fixed
This product rates up to BAL-29 for bushfire areas
Hardware Options:Black slimline hardware is supplied as standard or upgrade to “D” lock style.
Optional colours available is anodic natural matt, stone beige, pearl white or satin chrome.
General:Two and Three panels doors available as reverse to brochure
Four panel doors have a prefix of TXXD
Low profile sill supplied as standard
The sill must be level side to side and front to back and fully supported during and after construction.
The aluminium sill and external brick skin must be separated with an isolator to prevent possible reaction between brick and mortar and the aluminium frame which can lead to crevice corrosion.
NOTE: Synergy® Sliding Door are not available in Victoria they supply Quantum Sliding Door.
5
InstallationSynergy® Sliding Door | Building In Detail | Brick Veneer - 230mm wall
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
HEAD DETAIL
SILL DETAIL
JAMB DETAIL
FLASHINGBY BUILDER
PACKING BY BUILDER
FIXINGS AT450mm CENTRES
FLASHING BY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
STUD
HEAD
TIMBER REVEAL
STUD
TIMBER REVEAL
TRIMMERHEADER
12mm CLEARANCE
NO PACKING
TIMBER ARCHITRAVE BY BUILDER
OUTSIDE
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
QUAD BYBUILDER
OPE
NIN
G =
FR
AM
E SI
ZE +
35m
m (N
O H
AR
DW
OO
D S
ILL)
FRA
ME
SIZE
CONCRETE SLAB
SHIMS AT 450mm MAX CTRS.
FLASHINGBY BUILDER
BRICK SILL
SILL TILE
CONTINUOUS CAULKINGMORTAR
BRICKWORK
SILL
JAMB
101.6
40
101.6
40
101.6
26.5
SOFFIT LINING
6Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
InstallationSynergy® Sliding Door | Building In Detail | Double Brick - 280mm wall
HEAD DETAIL
SILL DETAIL
JAMB DETAIL
FRA
ME
SIZE
OUTSIDE
FLASHINGBY BUILDER
FRA
ME
SIZE
FLASHING BY BUILDER
BRICKWORK BRICKWORK
CEMENT RENDER
STEEL LINTEL BY BUILDER
SILL TILE
MORTARCONTINUOUS CAULKING
SHIMS AT 450mm MAX CTRS.
CEM
ENT R
END
ER
BRICKWORK
BUILDING IN LUGS AT450mm CENTRES
FLASHING BY BUILDER
BRICK SILL
REBATED CONCRETE FLOOR SLAB
BRICKWORK
40
101.6
HEAD
40
101.6
SILL26.5
101.6
JAMB
7Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
InstallationSynergy® Sliding Door | Building In Detail | Aluminium Cladding on Studs
HEAD DETAIL
SILL DETAIL
JAMB DETAIL
OUTSIDE
CAULKING
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FIXINGS AT 450mm CENTRES
PACKING BY BUILDER
STUD
NO PACKING
TIMBER REVEAL
HEADER TRIMMER
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
STUD
FLOORING
FLOOR JOISTFLOOR JOIST
12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
TRIM BY BUILDER
FLASHING BY BUILDER
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
ALU
MIN
IUM
OR
VINYL W
ALL C
LAD
DIN
G
40
101.6
HEAD
101.6
40SILL
JAMB
101.6
26.5
8Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Two Lite (FX)
101.6 101.6
10.2
40
78.8
28.6
OUTSIDE
101.6
28.6
OUTSIDE
101.6
40
82.9
10.2
40
78.9
40
82.9
24
53.3
24
F F
HEAD
SILL
HEAD
SILL
9Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Two Lite (FX)
28.6
101.6
26.5
3026.5
68.8
49
26
52.6
26
OUTSIDE
JAMB
JAMB
F
10Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Three Lite (FXF)
53.3
78.9
78.8
SILL
F
40
10.2
101.6
SILL
40
10.2
101.6
F
101.6
HEAD
24
82.9
40
OUTSIDE
28.6
101.6
82.9
HEAD
24
40
OUTSIDE
28.6
FF
11Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Three Lite (FXF)
53.3
78.8
SILL F
40
10.2
101.6
101.6
HEAD
24
40
OUTSIDE
28.6
F
82.9
12Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Three Lite (FXF)
F F
101.6
OUTSIDE
28.6
JAMB
JAMB
26.5
3035.6
26
49
66
34.7 26.1
26.5
13Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Four Lite (FXXF)
JAMB
F
26.5
JAMB
101.6
26.5
26
28.6
OUTSIDE
F
3035.6
30
49
66
34.8 26.1
14Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | 2x2 Internal Corner
26.5
101.6
JAMB
OUTSIDE
28.6
OU
TSID
E
28.6
101.6
26.5 30 75
80.8
30
26
49
49
26
FRAME WIDTH (a)
(a)(b)
RE
TU
RN
WID
TH
(b)
15Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | 2x2 External Corner
49
30
101.6
JAMB
OUTSIDE
28.626.5
OU
TSID
E
28.6
101.675
66
30
49
26
26
FRAME WIDTH (a)
(a)(b)
RE
TU
RN
WID
TH
(b)
16Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Double Glazed
78.9
101.6
SILL
10.2
10.2SILL
F
40
F
40
101.6
101.6
OUTSIDE
28.6
HEAD
101.6
28.6
HEAD
82.9
40
24
82.9
40
OUTSIDE
78.9
24
17Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Please note that drawings are not to scale
Synergy® Sliding Door | TXD | Mk-7 | 3 July 2013
Cross Sectional ViewsTrend® Sliding Door | Double Glazed
F
JAMB
52.6
68.8
26.5
101.6
28.6
JAMB
OUTSIDE
49
3026.5
top related