Aéro - Diager Industrie · pulverização central 50 Bars ou micro lubrificação central), ora numa plataforma UPA (Unidade Portátil ... 0,01 max Ferramentas fornecidas com ou
Post on 10-Nov-2018
215 Views
Preview:
Transcript
Aéronáutica
GAMA ASSEMBLAGEMFerramentas HSS, Carboneto e PCD
Soluções para a indústria aeronáutica
A orientação tecnológica
Fabricante de ferramentas e visionário
Mais de 10% do Volume de Negócios é destinado à pesquisa e ao desenvolvimento. DIAGER INDUSTRIE é vanguardista e apresenta soluções nos domínios chave da maquinagem para o futuro…
Gamas de ferramentas :• Furação• Furação / Fresagem• Desbaste• Fresagem - Recorte - Pocketing
Serviços• Assistência técnica no sítio de produção clientes• Validação das ferramentas na DIAGER indústria.• Manutenção das ferramentas (afi ações e revestimentos) • Gestão de ferramentas sob contrato.
Logística• Gestão das encomendas em S.E.F. (Segurança Entrega Fornecedor) • Gestão das encomendas em T.D.I (Troca de Dados em Informática)• Etiquetagem sob GENCOD
Uma estreita e duradoura parceria
O desenvolvimento de DIAGER INDUSTRIE está ligado à presença cada vez mais intensa das suas equipas, no acompanhamento aos clientes para o desenvolvimento de novas peças até à produção em série, com uma constante preocupação de melhoramento da produtividade.
DIAGER INDUSTRIE impõe-se como especialista das ferramentas em carboneto há mais de 50 anos. Dispondo de um parque de máquinas modernas e de um departamento de pesquisa e desenvolvimento competitivo, DIAGER INDUSTRIE utiliza todas as sinergias de um grupo para conceber ferramentas de alta qualidade para os industriais. Verdadeira parceira dos maiores atores da indústria mecânica, aeronáutica, espacial ou automóvel, DIAGER INDUSTRIE concentrou o melhor da sua perícia numa gama de produtos qualitativos.
Escolher DIAGER INDUSTRIE,é benefi ciar das últimas inovações técnicas.
• Aço• Carboneto & carboneto soldado• CBN• PCD
AERONÁUTICA
3
Uma gama de ferramentas de carboneto e de carboneto soldado que responde às problemáticas da maquinagem na aeronáutica.
Ferramentas Carboneto
Ferramentas PCD
DIAGER Industrie propõe-lhe a solução de maquinagem
Um avanço tecnológico...
MATÉRIASAlumínio Titânio
Compósitos Inconel
Inox
AMBIENTEMicropulverização
Em seco
OS MEIOSMáquina portátil avanços manuais Máquina portátil
avanços automáticos
RobôCentro de
maquinagem Unidade de furação
por interpolação
AERONÁUTICA
para o seu serviço
Plataformas de provas
Controlo ferramentasCâmera Digital ampliação ótica x 10 x 320 : desgaste Controls e bordas acuidade.
Medidas dimentionnelles a lasermemorização.
Controlo das peças Medidas tridimensionais para determinar
as capacidades das ferramentas : dispersão das cotas entre diferentes desbastes, desbastes ovais,
controlo dos ângulos das fresagens (CP-CPK)Medição da rugosidade : Controlo dos estados das superfícies.
Palmer 2 teclas : Controlo dos desbastes.Micrómetro 3 teclas : controlo dos desbastes.Montagem especial para controlo das limalhas.
4
Departamento de Estudos & Pesquisas
São efetuados testes de validação, ora numa plataforma de provas Huron KX 10 (24 000 tr/ min, pulverização central 50 Bars ou micro lubrificação
central), ora numa plataforma UPA (Unidade Portátil Automatizada) dedicada à aeronáutica.
Para determinar os pontos de funcionamento das ferramentas, estas máquinas de provas são equipadas
de meios aquisitivos para a realização de P.F.M. (Par Ferramenta Matéria).
Secção de estudos
Estudo dos cadernos de encargos e conceção das ferramentas.
Para responder à diversidade dos mercados, as ferramentas de furação, de fresagem, de desbaste,
de interpolação, de pocketing são concebidas em CAO 3D volúmico (Solid Works). A empresa dispõe de cinco estações de trabalho que realizam as primeiras
simulações antes de passar para a produção. A força de venda técnica e o departamento de estudos de Diager
Industrie comprometem-se em responder aos problemas de maquinagem dos seus clientes e envolvem-se na otimização
do desempenho e dos custos.
AERONÁUTICA
OUTRAS CATEGORIAS
Avanço tecnológico 2
Ferramentas PCD/carboneto 3
Departamento de estudos e
pesquisas 4
Condições gerais de
venda23
FERRAMENTAS STANDARDReferências Séries Pontas Páginas
FURAÇÃO /FRESAGEMFerramentas HSS, CW e PCD
90310/91310* Fresas para fresagem piloto monobloco
9
90330/91330* Fresas para fresagem piloto amovível
10
96230/96330* Fresas para fresagem diamante 11
95000 Piloto liso 12
9668396210/2473
Brocas para fresagem PCD com broca carboneto amovível 13
FURAÇÃO TITÂNIOBrocas carboneto monobloco
2472 SN 140° 14
FURAÇÃO DOS COMPÓSITOSBrocas carboneto monobloco
2448 Perceur/Aleseur 120° 15
DESBASTEGama desbaste carboneto (alumínio)
2882H Desbaste acabamento carboneto monobloco
16
2883H Desbaste pilotado 17
FURAÇÃO DOS COMPÓSITOSBrocas com pastilhas
2409* SN 118° 18
2419 SN 90° 19
2418* SL 118° 20
FURAÇÃO DOS COMPÓSITOS /ALUBrocas com pastilhas
2439* SL 118° 21
2436* SN 118° 22*em armazém
FERRAMENTAS ESPECIAIS CW & PCDBrocas
6-7-8Brocas fresagem
Desbastadoras
Fresas
Índice
Gama Assemblagem
5
Photo Credit Comunicação Corporativa.© AIRBUS FRANCE S.A.S. 2008.
Todos os direitos reservados.
AERONÁUTICA
FIXAÇÕESAFIAÇÃO GEOMETRIAS DE FERRAMENTAS
Hélices 15°
Hélices 20°
Talha reta 0°
Ferramentas especiais
MATERIAIS DE CORTES
RVT PCDHSS & CW RVT
Diager Industrie concebe e fabrica brocas, brocas de fresagem, ferramentas de desbaste e uma grande variedade de ferramentas especiais permitindo
de trabalhar sobre os mais variados meios de produção (centros de maquinagem, robôs, UPA, meios manuais...) com o objetivo de
realizar as suas operações de furação, de fresagem e de desbaste nos ambientes mais constrangedores.
Hélices 30°
6
AERONÁUTICA
Furação Desbaste Furação / Fresagem Desbaste / FresagemFresagem
Interpolação
8
GEOMETRIAS
Com fresagem Ou sem
Carboneto Monobloco
+ revestimento
+ pastilhas PCD
Diager Industrie dispõe de uma longa experiência das ferramentas e do processo de interpolação permitindo de realizar nos mais diversos materiais (alumínio, titânio, inox, compósitos) desbastes ou desbastes /fresagens de uma única vez. As vantagens principais da interpolação:
• A capacidade de realizar desbastes de alta qualidade dimensional e de controlo dos estados das superfícies.• A capacidade de trabalhar em condições de lubrifi cação muito reduzidas.• Um processo que gera arestas reduzidas nos furos realizados.• A possibilidade de realizar diferentes diâmetros com uma única ferramenta.• Muito boa gestão das limalhas.
AERONÁUTICA
Furação Desbaste Furação / Fresagem Desbaste / FresagemFresagem
Ø 10M 6 x 100
2,38
3
0,2 à 0,4
90310-023891310-0238
3,17 90310-031791310-317
3,5 90310-035091310-0350
3,60 90310-036091310-0360
3,97 90310-039791310-0397
4,00 90310-040091310-0400
4,15 90310-041591310-0415
Ø 14M 8 x 100
4,76
0,4 - 0,75
90310-047691310-0476
4,80 90310-048091310-0480
Ø 14M 8 x 100
5,00 90310-050091310-0500
Ø 10M 6 x 100
5,60 90310-056091310-0560
5,60
0,75 - 1,25
90310-056091310-0560
6,0090310-060091310-0600
6,35 90310-063591310-0635
Ø 17M 8 x 100
8,00 90310-080091310-0800
9,52 90310-095291310-0952
Ø 21M 8 x 100
10,00 90310-100091310-1000
Ø D - M Ø P número de dentes R Código artigo
REFERÊNCIA
90310HSS
REFERÊNCIA
91310Pastilhas de
Carboneto
9
Ferramenta de fresagem piloto monobloco HSS e CW
CORTE LIGA
LIGEIRA
Características :Número de bordas :
3 bordas
Outros ângulos de fresagem ou
dimensões à medida a pedido
90310 :Aço rápido M42
91310 : Carboneto MK15
REFERÊNCIA
90330HSS
10
Ver pagina
16
2, 00
M 6 x 100
2 28 mm 3
carboneto de ponta
28 mm
raio a pedido
90330-100191330-1001
2, 5090330-100291330-1002
3, 0090330-100391330-1003
3, 5090330-100491330-1004
14 4, 00
M 8 x 100plaquetassoldada
90330-100591330-1005
175
90330-100691330-1006
21 390330-100791330-1007
Ø D Ø Dq Ø Dp M número de dentes LT número
de dentesParticularidade LT R Código artigo
90330 91330
REFERÊNCIA
91330Pastilhas Carboneto
10
Ferramenta de fresagem piloto amovível HSS e CW
CORTE LIGA LIGEIRA
Características :Número de bordas :3 bordas
Outros ângulos de fresagem ou dimensões à medida a pedido
90330 :Aço rápido M42
91330 : Carboneto MK15
Ø D Ø Dq Ø Dp M número de dentes LT Código artigo
Ø D Ø Dq Ø Dp M número de dentes LT Código artigo
15,5
5Ver pagina
16 M 8 x 100 3
29,5
96330-155017 96330-170020 96330-200021 96330-210025
6 3296330-2500
27,5 96330-2750
102
Ver pagina16
M 6 x 1002 28 mm
96230-1001
2,5 96230-1002
12,4 2 96230-1240
143
M 8 x 10096230-1401
4 96230-1402
REFERÊNCIA
963303 dentes
REFERÊNCIA
962302 dentes
11
Ferramenta de fresagem pastilhas diamante
GRAFITE/EPOXI FIBRA
DE CARBONO ALUMÍNIO /
TITÂNIO
Características :Corte à direitaTalha reta : 0°Matéria : PCD
e corpo de fresa 35 CD4
coaxialidade : 0,01 maxFerramentas fornecidas
com ou sem piloto.Parafuso de apertar
Pilotos : M3Outros ângulos de
fresagem ou dimensões à
medida a pedido
Ø Dp Ø Dq Código artigo
2,00
2
95000-0200
2,38 95000-0238
2,50 95000-0250
2,80
2,5
95000-0280
3,00 95000-0300
3,17 95000-0317
3,50 3 95000-0350
4,003,5
95000-0400
4,15 95000-0415
4,76
4
95000-0476
4,80 95000-0480
5,00 95000-0500
5,60 95000-0560
6,00 95000-0600
6,35 95000-0635
7,94
5
95000-0794
8,00 95000-0800
9,52 95000-0952
10,00 95000-0100
11,11
6
95000-1111
12,70 95000-1270
14,29 95000-1429
15,87 95000-1587
REFERÊNCIA
95000
12
Piloto liso
Executamos a pe-dido todas as di-mensões fora das normas.
Ø A Ø D M LT Lp Lt ß Código artigo
Ø A Ø Desbaste M ß Código artigo
Ø A Lp L (total) Código artigo
FERRAMENTA COMPLETA Referência 96683
CORPO Referência 96210
BROCA Referência 2473
3,2 12
6 x 100
42 9,5 21,5
100°130°
96683-3212
4,17 12 45 12,5 24,5 96683-4112
4,82 12 48 14,5 26,5 96683-4812
5,56 14
8 x 100
55 17 31 96683-5514
6,35 14 60 19 33 96683-6314
7,92 17 70 23,5 40,5 96683-7917
9,52 17 80 28,5 45,5 96683-9517
12 2,6
6 x 100
100°
96210-1226
12 2,9 96210-1229
12 3,5 96210-1235
14 4,3
8 x 100
96210-1443
14 5 96210-1450
17 6,5 96210-1765
17 8 96210-1780
3,2 9,2 28 2473-0320
4,17 12,5 32 2473-0417
4,82 14,5 35 2473-0482
5,56 17 42 2473-0556
6,35 19 46 2473-0635
7,92 23,5 57 2473-0792
9,52 28,5 66 2473-0952
FERFERFERFERFERFERFERFERFERFERRAMRAMRAMRAMRAMRAMRAMRAMRAMRAMENTENTENTENTENTENTENTENTENTENTA CA CA CA CA CA CA CA CA CA COMPOMPOMPOMPOMPOMPOMPOMPOMPOMPLETLETLETLETLETLETLETLETLETLETAAAAAAAAAA RRRRRRRRRR ffffefeefeefeefeefeefe êêêêrênrênrênrênrênrên iiiiciaciaciaciaciacia 9696969696969696683683683683683683683683
13
Ferramenta de fresagem PCD com broca carboneto amovível
3xØASérie curta
Características :
Corpo 96210Corte à direita Talha reta : 0°
Materiais : PCDCorpo de fresa :
Aço 35CD4Número de dentes : 2
Broca 2473Corte à direita
Hélice à direita 30°Número de bordas : 2
Sulcos : FDAAfi ação : AF30
Matéria:Carboneto MK15
Outros ângulos de fresagem ou dimensões à
medida a pedido
FERRAMENTA COMPLETA
96683
CORPO
96210BROCA
2473
ØA LT x Lt ØB Código artigo ØA LT x Lt ØB Código artigo
2,5 43 x 14 2,5 2472--0250
3 46 x 16 3 2472--0300
3,2 49 x 18 3,2 2472--0320
3,3 49 x 18 3,3 2472--0330
3,5 52 x 20 3,5 2472--0350
3,7 52 x 20 3,7 2472--0370
4 55 x 22 4 2472--0400
4,1 55 x 22 4,1 2472--0410
4,2 55 x 22 4,2 2472--0420
4,3 58 x 24 4,3 2472--0430
4,5 58 x 24 4,5 2472--0450
4,82 62 x 26 4,82 2472--0482
5 62 x 26 5 2472--0500
5,1 62 x 26 5,1 2472--0510
5,2 62 x 26 5,2 2472--0520
5,3 62 x 26 5,3 2472--0530
5,5 66 x 28 5,5 2472--0550
5,6 66 x 28 5,6 2472--0560
5,8 66 x 28 5,8 2472--0580
6 66 x 28 6 2472--0600
6,1 70 x 31 6,1 2472--0610
6,2 70 x 31 6,2 2472--0620
6,3 70 x 31 6,3 2472--0630
6,35 70 x 31 6,35 2472--0635
6,4 70 x 31 6,4 2472--0640
6,5 70 x 31 6,5 2472--0650
7 74 x 34 7 2472--0700
7,92 79 x 37 7,92 2472--0792
8 79 x 37 8 2472--0800
9,52 84 x 40 9,52 2472--0952
10 89 x 43 10 2472--1000
11,05 95 x 47 11,05 2472--1105
14
Broca carboneto monobloco 2 bordos Titânio em seco
3xØASérie curta
REFERÊNCIA
2472
TITÂNIO CARBONO
FIBRA DE VIDRO
TERMOPLÁSTICA Características :Corte e hélice à direita : 10°Número de bordas : 2Filetes duplos Sulcos : FDAfi ação : AF 30Ponta : 140°Carboneto : MK 15
REFERÊNCIA
2448
2,5 100 x 45 2,5 2448--0250
3 100 x 45 3 2448--0300
3,2 100 x 45 3,2 2448--0320
3,3 100 x 45 3,3 2448--0330
3,5 100 x 45 3,5 2448--0350
3,7 100 x 45 3,7 2448--0370
4 100 x 45 4 2448--0400
4,1 100 x 45 4,1 2448--0410
4,2 100 x 45 4,2 2448--0420
4,3 100 x 45 4,3 2448--0430
4,5 100 x 45 4,5 2448--0450
4,82 100 x 45 4,82 2448--0482
5 100 x 45 5 2448--0500
5,1 100 x 45 5,1 2448--0510
5,2 100 x 45 5,2 2448--0520
5,3 100 x 45 5,3 2448--0530
5,5 100 x 45 5,5 2448--0550
5,6 100 x 45 5,6 2448--0560
5,8 100 x 45 5,8 2448--0580
6 100 x 45 6 2448--0600
6,1 100 x 45 6,1 2448--0610
6,2 100 x 45 6,2 2448--0620
6,3 100 x 45 6,3 2448--0630
6,35 100 x 45 6,35 2448--0635
6,4 100 x 45 6,4 2448--0640
6,5 100 x 45 6,5 2448--0650
7 100 x 45 7 2448--0700
7,92 100 x 45 7,92 2448--0792
8 100 x 45 8 2448--0800
9,52 100 x 45 9,52 2448--0952
10 100 x 45 10 2448--1000
11,05 100 x 45 11,05 2448--1105
15
Broca furação/desbaste carboneto monobloco
3 e 4 bordas
ØA LT x Lu ØB Código artigo ØA LT x Lu ØB Código artigo
CARBONO
FIBRA DE VIDRO
TERMOPLÁSTICA
Características :Talha reta.
Corte axial : 0°Sulcos : L
Afi ação : AF 32Ponta : 120°
Carboneto : MK 15
Desbaste acabamento carboneto monoblocoREFERÊNCIA
2882H
ØA ØC ØB LT x LC código artigo
ØA ØC ØB LT x LC código artigo
4,00 3,50 4,00
90 x 45
2882H-0400
4,16 3,66 4,16 2882H-0416
4,20 3,70 4,20 2882H-0420
4,76 4,76 4,76 2882H-0476
4,82 4,32 4,82 2882H-0482
4,83 4,33 4,83 2882H-0483
4,86 4,36 4,86 2882H-0486
5,00 5,00 5,00 2882H-0500
5,10 4,60 5,10 2882H-0510
5,22 4,72 5,22 2882H-0522
5,55 5,05 5,55 2882H-0555
5,75 5,25 5,75 2882H-0575
6,00 5,50 6,00
120 x 60
2882H-0600
6,03 5,53 6,03 2882H-0603
6,10 5,60 6,10 2882H-0610
6,25 5,75 6,25 2882H-0625
6,33 5,83 6,33 2882H-0633
6,35 5,85 6,35 2882H-0635
6,37 5,87 6,37 2882H-0637
6,42 5,92 6,42 2882H-0642
6,53 6,03 6,53 2882H-0653
6,74 6,24 6,74 2882H-0674
6,90 6,40 6,90 2882H-0690
7,00 6,50 7,00
140 x 70
2882H-0700
7,14 6,64 7,14 2882H-0714
7,70 7,20 7,70 2882H-0770
7,83 7,33 7,83 2882H-0783
7,92 7,42 7,92 2882H-0792
7,93 7,43 7,93 2882H-0793
7,94 7,44 7,94 2882H-0794
7,97 7,47 7,97 2882H-0797
8,33 7,83 8,33
160 x 80
2882H-0833
8,73 8,23 8,73 2882H-0873
9,30 8,80 9,30 2882H-0930
9,51 9,01 9,51 2882H-0951
9,52 9,02 9,52 2882H-0952
9,53 9,03 9,53 2882H-0953
9,92 9,42 9,92 2882H-0992
10,00 9,50 10,00
180 x 90
2882H-1000
10,32 9,82 10,32 2882H-1032
10,71 10,21 10,71 2882H-1071
10,96 10,46 10,96 2882H-1096
11,00 10,50 11,00
200 x 100
2882H-1100
11,05 10,55 11,05 2882H-1105
11,11 10,61 11,11 2882H-1111
11,51 11,01 11,51 2882H-1151
11,91 11,41 11,91 2882H-1191
12,30 11,80 12,30 2882H-1230
12,70 12,20 12,70 2882H-1270
13,09 12,59 13,09 2882H-1309
13,49 12,99 13,49 2882H-1349
14,27 13,77 14,27 2882H-1427
14,66 14,16 14,66 2882H-1466
15,08 14,58 15,08 2882H-1508
15,88 15,38 15,88 2882H-1588
16
Ø A
Ø B
Ø A
Ø B
LT
LC
Cône:
10 m
m
Ø C
TODOS MATERIAIS Características:Cauda cilíndrica ou triangular.Corte à direita.Hélice à esquerda : 15°Número de dentes : 6Nuance carboneto Microgrão.Sulcos polidos.Pontos de centroconservados.
Desbaste pilotado
D1(0/-10µ) D2(-10µ/-30µ) Número de dentes LT LU LP Ø Cauda código artigo
Ø 4,82 Ø 3,2 3 61 31 6 Ø 4,82 2883H-04821
Ø 4,82 Ø 4,1 4 61 31 6 Ø 4,82 2883H-04822
Ø 6,35 Ø 4,1 3 80 40 10 Ø 6,35 2883H-06351
Ø 6,35 Ø 5 4 80 40 10 Ø 6,35 2883H-06352
Ø 7,92 Ø 5 3 92 52 12 Ø 7,92 2883H-07921
Ø 7,92 Ø 6 4 92 52 12 Ø 7,92 2883H-07922
Ø 9,52 Ø 6 3 105 65 15 Ø 9,52 2883H-09521
Ø 9,52 Ø 8 4 105 65 15 Ø 9,52 2883H-09522
Ø 11,11 Ø 8 3 110 65 15 Ø 11,11 2883H-11111
Ø 11,11 Ø 9,2 4 110 65 15 Ø 11,11 2883H-11112
Ø 12,70 Ø 9,2 3 123 78 18 Ø 12,70 2883H-12701
Ø 12,70 Ø 10,8 4 123 78 18 Ø 12,70 2883H-12702
Ø 14,28 Ø 10,8 3 135 90 20 Ø 13 2883H-14281
Ø 14,28 Ø 12,5 4 135 90 20 Ø 13 2883H-14282
17
Mango
TODOS MATERIAIS
Características:Sulco : 2883HCorte à direita
Hélice à direita : 15°Matéria:
Carboneto MK10Número de dentes :
3 ou 4 dentes
Piloto não cortante
REFERÊNCIA
2883H
REFERÊNCIA
2409
1,50 40 x 18
NO
MIN
AL
2409--0150
1,60 43 x 20 2409--0160
1,70 43 x 20 2409--0170
1,80 46 x 22 2409--0180
1,90 46 x 22 2409--0190
2 49 x 24 2409--0200
2,10 49 x 24 2409--0210
2,20 53 x 27 2409--0220
2,30 53 x 27 2409--0230
2,40 57 x 30 2409--0240
2,50 57 x 30 2409--0250
2,60 57 x 30 2409--0260
2,70 61 x 33 2409--0270
2,80 61 x 33 2409--0280
2,90 61 x 33 2409--0290
3 61 x 33 2409--0300
3,10 65 x 36 2409--0310
3,20 65 x 36 2409--0320
3,30 65 x 36 2409--0330
3,40 70 x 39 2409--0340
3,50 70 x 39 2409--0350
3,60 70 x 39 2409--0360
3,70 70 x 39 2409--0370
3,80 75 x 43 2409--0380
3,90 75 x 43 2409--0390
4 75 x 43 2409--0400
4,10 75 x 43 2409--0410
4,20 75 x 43 2409--0420
4,30 80 x 47 2409--0430
4,40 80 x 47 2409--0440
4,50 80 x 47
NO
MIN
AL
2409--0450
4,60 80 x 47 2409--0460
4,70 80 x 47 2409--0470
4,80 86 x 52 2409--0480
4,90 86 x 52 2409--0490
5 86 x 52 2409--0500
5,10 86 x 52 2409--0510
5,20 86 x 52 2409--0520
5,30 86 x 52 2409--0530
5,40 93 x 57 2409--0540
5,50 93 x 57 2409--0550
5,60 93 x 57 2409--0560
5,70 93 x 57 2409--0570
5,80 93 x 57 2409--0580
5,90 93 x 57 2409--0590
6 93 x 57 2409--0600
6,10 101 x 63 2409--0610
6,20 101 x 63 2409--0620
6,30 101 x 63 2409--0630
6,40 101 x 63 2409--0640
6,50 101 x 63 2409--0650
6,60 109 x 69 2409--0660
6,70 109 x 69 2409--0670
6,80 109 x 69 2409--0680
6,90 109 x 69 2409--0690
7 109 x 69 2409--0700
7,10 109 x 69 2409--0710
7,20 109 x 69 2409--0720
7,30 109 x 69 2409--0730
7,40 109 x 69 2409--0740
7,50 109 x 69 2409--0750
7,60 117 x 75 2409--0760
7,70 117 x 75 2409--0770
7,80 117 x 75 2409--0780
7,90 117 x 75 2409--0790
8 117 x 75
NO
MIN
AL
2409--0800
8,10 117 x 75 2409--0810
8,20 117 x 75 2409--0820
8,30 117 x 75 2409--0830
8,40 117 x 75 2409--0840
8,50 117 x 75 2409--0850
8,60 125 x 81 2409--0860
8,70 125 x 81 2409--0870
8,80 125 x 81 2409--0880
8,90 125 x 81 2409--0890
9 125 x 81 2409--0900
9,10 125 x 81 2409--0910
9,20 125 x 81 2409--0920
9,30 125 x 81 2409--0930
9,40 125 x 81 2409--0940
9,50 125 x 81 2409--0950
9,60 133 x 87 2409--0960
9,70 133 x 87 2409--0970
9,80 133 x 87 2409--0980
9,90 133 x 87 2409--0990
10 133 x 87 2409--1000
10,20 133 x 87 2409--1020
10,50 133 x 87 2409--1050
11 142 x 94 2409--1100
11,20 142 x 94 2409--1120
11,50 142 x 94 2409--1150
12 151 x 101 2409--1200
12,20 151 x 101 2409--1220
12,50 151 x 101 2409--1250
13 151 x 101 2409--1300
13,50 160 x 108 2409--1350
14 160 x 108 2409--1400
14,50 169 x 114 2409--1450
15 169 x 114 2409--1500
15,50 178 x 120 2409--1550
16 178 x 120 2409--1600
16,50 184 x 125 2409--1650
17 184 x 125 2409--1700
17,50 191 x 130 2409--1750
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
Broca pastilha carboneto 2 bordas
3xØASérie curta
18
118°
± 2
°
Ø A
Ø B LT
Lt
MATERIAIS COMPÓSITOS Características:Ponta : 118°Corte à direita : 6°Hélice à direita : 25°Sulcos : NAfi ação : AF 1Corpo :AÇO RÁPIDO Carboneto : K 20Solda :Muito altatemperatura Fixação :Cilíndrica
90
REFERÊNCIA
2419
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
90
Código artigo
Broca pastilha carboneto 2 bordas
19
3xØSérie curta
1,50 40 x 18
NO
MIN
AL
2419--0150
1,60 43 x 20 2419--0160
1,70 43 x 20 2419--0170
1,80 46 x 22 2419--0180
1,90 46 x 22 2419--0190
2 49 x 24 2419--0200
2,10 49 x 24 2419--0210
2,20 53 x 27 2419--0220
2,30 53 x 27 2419--0230
2,40 57 x 30 2419--0240
2,50 57 x 30 2419--0250
2,60 57 x 30 2419--0260
2,70 61 x 33 2419--0270
2,80 61 x 33 2419--0280
2,90 61 x 33 2419--0290
3 61 x 33 2419--0300
3,10 65 x 36 2419--0310
3,20 65 x 36 2419--0320
3,30 65 x 36 2419--0330
3,40 70 x 39 2419--0340
3,50 70 x 39 2419--0350
3,60 70 x 39 2419--0360
3,70 70 x 39 2419--0370
3,80 75 x 43 2419--0380
3,90 75 x 43 2419--0390
4 75 x 43 2419--0400
4,10 75 x 43 2419--0410
4,20 75 x 43 2419--0420
4,30 80 x 47 2419--0430
4,40 80 x 47 2419--0440
4,50 80 x 47 2419--0450
4,60 80 x 47 2419--0460
4,70 80 x 47 2419--0470
4,80 86 x 52 2419--0480
4,90 86 x 52 2419--0490
5 86 x 52 2419--0500
5,10 86 x 52 2419--0510
5,20 86 x 52 2419--0520
5,30 86 x 52 2419--0530
5,40 93 x 57 2419--0540
5,50 93 x 57
NO
MIN
AL
2419--0550
5,60 93 x 57 2419--0560
5,70 93 x 57 2419--0570
5,80 93 x 57 2419--0580
5,90 93 x 57 2419--0590
6 93 x 57 2419--0600
6,10 101 x 63 2419--0610
6,20 101 x 63 2419--0620
6,30 101 x 63 2409--0630
6,40 101 x 63 2419--0640
6,50 101 x 63 2419--0650
6,60 109 x 69 2419--0660
6,70 109 x 69 2419--0670
6,80 109 x 69 2419--0680
6,90 109 x 69 2419--0690
7 109 x 69 2419--0700
7,10 109 x 69 2419--0710
7,20 109 x 69 2419--0720
7,30 109 x 69 2419--0730
7,40 109 x 69 2419--0740
7,50 109 x 69 2419--0750
7,60 117 x 75 2419--0760
7,70 117 x 75 2419--0770
7,80 117 x 75 2419--0780
7,90 117 x 75 2419--0790
8 117 x 75 2419--0800
8,10 117 x 75 2419--0810
8,20 117 x 75 2419--0820
8,30 117 x 75 2419--0830
8,40 117 x 75 2419--0840
8,50 117 x 75 2419--0850
8,60 125 x 81 2419--0860
8,70 125 x 81 2419--0870
8,80 125 x 81 2419--0880
8,90 125 x 81 2419--0890
9 125 x 81
NO
MIN
AL
2419--0900
9,10 125 x 81 2419--0910
9,20 125 x 81 2419--0920
9,30 125 x 81 2419--0930
9,40 125 x 81 2419--0940
9,50 125 x 81 2419--0950
9,60 133 x 87 2419--0960
9,70 133 x 87 2419--0970
9,80 133 x 87 2419--0980
9,90 133 x 87 2419--0990
10 133 x 87 2419--1000
10,20 133 x 87 2419--1020
10,50 133 x 87 2419--1050
11 142 x 94 2419--1100
11,20 142 x 94 2419--1120
11,50 142 x 94 2419--1150
12 151 x 101 2419--1200
12,20 151 x 101 2419--1220
12,50 151 x 101 2419--1250
13 151 x 101 2419--1300
13,50 160 x 108 2419--1350
14 160 x 108 2419--1400
14,50 169 x 114 2419--1450
15 169 x 114 2419--1500
15,50 178 x 120 2419--1550
16 178 x 120 2419--1600
16,50 184 x 125 2419--1650
17 184 x 125 2419--1700
17,50 191 x 130 2419--1750
MATERIAIS COMPÓSITOS
Características:Ponta : 90°
Corte à direita : 6°Hélice à direita : 25°
Sulcos : NAfi ação : AF 1
Corpo :AÇO RÁPIDO
Carboneto : K 20Solda :
Muito alta temperatura
Fixação :Cilíndrica
1,80 80 x 53
NO
MIN
AL
2418--0180
1,90 80 x 53 2418--0190
2 85 x 56 2418--0200
2,10 85 x 56 2418--0210
2,20 90 x 59 2418--0220
2,30 90 x 59 2418--0230
2,40 95 x 62 2418--0240
2,50 95 x 62 2418--0250
2,60 95 x 62 2418--0260
2,70 100 x 66 2418--0270
2,80 100 x 66 2418--0280
2,90 100 x 66 2418--0290
3 100 x 66 2418--0300
3,10 106 x 69 2418--0310
3,20 106 x 69 2418--0320
3,30 106 x 69
NO
MIN
AL
2418--0330
3,40 112 x 73 2418--0340
3,50 112 x 73 2418--0350
3,60 112 x 73 2418--0360
3,70 112 x 73 2418--0370
3,80 119 x 78 2418--0380
3,90 119 x 78 2418--0390
4 119 x 78 2418--0400
4,10 119 x 78 2418--0410
4,20 119 x 78 2418--0420
4,30 126 x 82 2418--0430
4,40 126 x 82 2418--0440
4,50 126 x 82 2418--0450
4,60 126 x 82 2418--0460
4,70 126 x 82 2418--0470
4,80 132 x 87 2418--0480
4,90 132 x 87 2418--0490
5 132 x 87 2418--0520
5,10 132 x 87 2418--0510
5,20 132 x 87 2418--0520
5,30 132 x 87 2418--0530
5,40 139 x 91 2418--0540
5,50 139 x 91 2418--0550
5,60 139 x 91 2418--0560
5,70 139 x 91 2418--0570
5,80 139 x 91 2418--0580
5,90 139 x 91 2418--0590
6 139 x 91
NO
MIN
AL
2418--0600
6,10 148 x 97 2418--0610
6,20 148 x 97 2418--0620
6,30 148 x 97 2418--0630
6,40 148 x 97 2418--0640
6,50 148 x 97 2418--0650
6,60 148 x 97 2418--0660
6,70 148 x 97 2418--0670
6,80 156 x 102 2418--0680
6,90 156 x 102 2418--0690
7 156 x 102 2418--0700
7,10 156 x 102 2418--0710
7,20 156 x 102 2418--0720
7,30 156 x 102 2418--0730
7,40 156 x 102 2418--0740
7,50 156 x 102 2418--0750
7,60 165 x 109 2418--0760
7,70 165 x 109 2418--0770
7,80 165 x 109 2418--0780
7,90 165 x 109 2418--0790
8 165 x 109 2418--0800
8,10 165 x 109 2418--0810
8,20 165 x 109 2418--0820
8,30 165 x 109 2418--0830
8,40 165 x 109 2418--0840
8,50 165 x 109 2418--0850
9 175 x 115 2418--0900
9,50 175 x 115 2418--0950
10 184 x 121 2418--1000
10,50 184 x 121 2418--1050
11 195 x 128 2418--1100
11,50 195 x 128 2418--1150
12 205 x 134 2418--1200
12,50 205 x 134 2418--1250
13 205 x 134 2418--1300
13,50 214 x 140 2418--1350
14 214 x 140 2418--1400
14,50 220 x 144 2418--1450
15 220 x 144 2418--1500
16 227 x 149 2418--1600
17 235 x 154 2418--1700
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
REFERÊNCIA
2418
Broca pastilha carboneto 2 bordas
5xØASérie longa
20
MATERIAIS COMPÓSITOS Características:Ponta : 118°Corte à direita : 6°Hélice à direita : 25°Sulcos : NAfi ação : AF 1Corpo :AÇO RÁPIDO Carboneto : K 20Solda :Muito alta temperatura Fixação :Cilíndrica
2,50 57 x 30
NO
MIN
AL
2439--0250
2,60 57 x 30 2439--0260
2,70 61 x 33 2439--0270
2,80 61 x 33 2439--0280
2,90 61 x 33 2439--0290
3 61 x 33 2439--0300
3,10 65 x 36 2439--0310
3,20 65 x 36 2439--0320
3,30 65 x 36 2439--0330
3,40 70 x 39 2439--0340
3,50 70 x 39 2439--0350
3,60 70 x 39 2439--0360
3,70 70 x 39 2439--0370
3,80 75 x 43 2439--0380
3,90 75 x 43 2439--0390
4 75 x 43 2439--0400
4,10 75 x 43 2439--0410
4,20 75 x 43 2439--0420
4,30 80 x 47 2439--0430
4,40 80 x 47 2439--0440
4,50 80 x 47 2439--0450
4,60 80 x 47 2439--0460
4,70 80 x 47 2439--0470
4,80 86 x 52 2439--0480
4,90 86 x 52 2439--0490
5 86 x 52 2439--0500
5,10 86 x 52 2439--0510
5,20 86 x 52 2439--0520
5,30 86 x 52 2439--0530
5,40 93 x 57 2439--0540
5,50 93 x 57 2439--0550
5,60 93 x 57 2439--0560
5,70 93 x 57 2439--0570
5,80 93 x 57 2439--0580
5,90 93 x 57 2439--0590
6 93 x 57 2439--0600
6,10 101 x 63
NO
MIN
AL
2439--0610
6,20 101 x 63 2439--0620
6,30 101 x 63 2439--0630
6,40 101 x 63 2439--0640
6,50 101 x 63 2439--0650
6,60 101 x 63 2439--0660
6,70 101 x 63 2439--0670
6,80 109 x 69 2439--0680
6,90 109 x 69 2439--0690
7 109 x 69 2439--0700
7,10 109 x 69 2439--0710
7,20 109 x 69 2439--0720
7,30 109 x 69 2439--0730
7,40 109 x 69 2439--0740
7,50 109 x 69 2439--0750
7,60 117 x 75 2439--0760
7,70 117 x 75 2439--0770
7,80 117 x 75 2439--0780
7,90 117 x 75 2439--0790
8 117 x 75 2439--0800
8,10 117 x 75 2439--0810
8,20 117 x 75 2439--0820
8,30 117 x 75 2439--0830
8,40 117 x 75 2439--0840
8,50 117 x 75 2439--0850
8,60 125 x 81 2439--0860
8,70 125 x 81 2439--0870
8,80 125 x 81 2439--0880
8,90 125 x 81 2439--0890
9 125 x 81 2439--0900
9,50 125 x 81
NO
MIN
AL
2439--0950
10 133 x 87 2439--1000
10,50 133 x 87 2439--1050
11 142 x 94 2439--1100
11,50 142 x 94 2439--1150
12 151 x 101 2439--1200
12,50 151 x 101 2439--1250
13 151 x 101 2439--1300
13,50 160 x 108 2439--1350
14 160 x 108 2439--1400
14,50 169 x 114 2439--1450
15 169 x 114 2439--1500
15,50 178 x 120 2439--1550
16 178 x 120 2439--1600
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
21
Broca pastilha carboneto 2 bordas
0 57 x 30 2439--0250
A LT x Lt ØB Código artigo
3xØASérie curta
COMPÓSITO/ALUMÍNIO COMPÓSITO / TITÂNIO COMPÓSITO / INOX Características :Ponta : 118°Corte à direita : 16°Hélice à direita : 25°Sulcos : polidos : NAfi ação : AF 20Corpo :AÇO RÁPIDO Carboneto : MK 20Fixação :Cilíndrica
REFERÊNCIA
2439
5 132 x 87
NO
MIN
AL
2436--0500
5,10 132 x 87 2436--0510
5,20 132 x 87 2436--0520
5,30 132 x 87 2436--0530
5,40 139 x 91 2436--0540
5,50 139 x 91 2436--0550
5,60 139 x 91 2436--0560
5,70 139 x 91 2436--0570
5,80 139 x 91 2436--0580
5,90 139 x 91 2436--0590
6 139 x 91 2436--0600
6,10 148 x 97 2436--0610
6,20 148 x 97 2436--0620
6,30 148 x 97 2436--0630
6,40 148 x 97 2436--0640
6,50 148 x 97 2436--0650
6,60 148 x 97 2436--0660
6,70 148 x 97 2436--0670
6,80 156 x 102 2436--0680
6,90 156 x 102 2436--0690
7 156 x 102 2436--0700
7,10 156 x 102 2436--0710
7,20 156 x 102 2436--0720
7,30 156 x 102 2436--0730
7,40 156 x 102 2436--0740
7,50 156 x 102
NO
MIN
AL
2436--0750
7,60 165 x 109 2436--0760
7,70 165 x 109 2436--0770
7,80 165 x 109 2436--0780
7,90 165 x 109 2436--0790
8 165 x 109 2436--0800
8,10 165 x 109 2436--0810
8,20 165 x 109 2436--0820
8,30 165 x 109 2436--0830
8,40 165 x 109 2436--0840
8,50 165 x 109 2436--0850
8,60 175 x 115 2436--0860
8,70 175 x 115 2436--0870
8,80 175 x 115 2436--0880
8,90 175 x 115 2436--0890
9 175 x 115 2436--0900
9,50 175 x 115 2436--0950
10 184 x 121 2436--1000
10,50 184 x 121 2436--1050
11 195 x 128 2436--1100
11,50 195 x 128 2436--1150
12 205 x 134 2436--1200
12,50 205 x 134 2436--1250
13 205 x 134 2436--1300
13,50 214 x 140 2436--1350
14 214 x 140 2436--1400
14,50 220 x 144 2436--1450
15 220 x 144 2436--1500
15,50 227 x 149 2436--1550
16 227 x 149 2436--1600
REFERÊNCIA
2436
ØA LT x Lt ØB Código artigo
ØA LT x Lt ØB Código artigo
22
Broca pastilha carboneto 2 bordas
COMPÓSITO/ALUMÍNIO COMPÓSITO / TITÂNIO COMPÓSITO / INOX Características :Ponta : 118°Corte à direita : 16°Hélice à direita : 25°Sulcos : polidos : NAfi ação : AF 20Corpo :AÇO RÁPIDO Carboneto : MK 20Fixação :Cilíndrica
5xØASérie longa
23
Condições gerais de vendas AERONÁUTICA
1 - GENERAL1.1- DIAGER markets two large categories of products, one of “standard products”, which are the items featured in the DIAGER catalogue, the other of “specifi c products”, defi ned by special production specifi cations, a particular conditioning or, generally, by individual commitments required by the Customer such as a distributor’s brand name.1.2 - The specifi c products defi ned above will, in addition to the present provisions, be the object of the signature of a partnership set up between DIAGER and the Customer, the contents of which are outlined in Article 11 hereunder.1.3Any order of goods implies that the purchaser fully accepts and adheres, without reserves, to the terms and conditions of sale hereof, which shall prevail over any other purchase document, in particular the general terms and conditions of purchase.
2 - ORDERS2.1 – Orders received are only valid after being expressly accepted by us, in particular orders taken by telephone or via a sales representative.2.2 - The Customer irrevocably accepts the terms of orders transmitted to our Company, unless agreed otherwise by us. Under this assumption, our Company is not under the obligation to maintain the initial deadlines. Furthermore, as far as remainders are concerned, the Customer will inform us when placing its orders whether remainders are to be managed or not. If not indicated on the order, remainders will be managed.2.3 – In the event that a Customer may order goods from our Company without having paid for previous order(s), our Company may refuse to accept the order, the Customer being entitled to no compensation for any reason whatsoever.2.4 – Any cancellation of an order will generate a refund of expense liabilities: tooling, materials, labour, etc…
3 – DELIVERIES3.1 – Deadlines3.1.1 – Delivery dates are given for indicative purposes. Delivery delays for any reason or incident leading to total or partial slowdown or stoppage of our workshops, failure by our suppliers or force majeure may not generate any penalties or cancellation of orders.3.1.2 – In any case, delivery may be undertaken within the deadlines only if the Customer is up-to-date as regards to its obligations towards our Company, the Customer being entitled to no compensation whatsoever.3.1.3 - In the case of specifi c products mentioned in 1.1 above, and except in cases caused by force majeure events, DIAGER accepts the consequences of the obligations it is put under by the Customer in relation to the compliance with the rate of service, crucially subject to the Ccustomer communicating to DIAGER its monthly orders forecast by reference every year in December for the following year.3.2– ConditionsDelivery is carried out either by directly handing over the product to the Customer, or by a simple notice of availability, or by release to a forwarding or haulage agent at our premises.
3.3 - Risks Any transportation, insurance, customs and handling operations are borne at the expense and risk of the purchaser. The latter should check the consignments on arrival and make its claims against the transportation agents, in compliance with Article L. 133-3 of the Commercial Code, even in the event of dispatching on a postage and shipping paid basis. Should the seller undertake dispatching, the consignment is sent “postage/shipment due”, at the lowest rates, unless otherwise expressly requested by the purchaser and, in all cases, under the entire responsibility of the latter.
4 - QUALITY4.1 – DIAGER undertakes to maintain the quality of its products under the terms of its ISO 9001 accreditation.4.2 – Rejects do not imply that delays in payment of good parts are permitted.4.3 – In the event of sub-contracted work, we guarantee that such work is undertaken exclusively in accordance with the notes, tolerance margins and specifi cations, as expressly indicated to us.4.4 – In the case of the specifi c products defi ned in 1.1 above, the Customer must outline in the specifi cations of the partnership agreement mentioned in 11 below all the characteristics of the parts to be manufactured, notably in relation to the material shades, the reference standards and the general tolerance for the dimensions without mention of margins on the drawings. On another hand, the Customer will be allowed to visit the manufacturing premises of the supplier at any time, and may, at his own expense, monitor himself or through his chosen representatives, quality controls on the Products.
5 – RETURNED GOODSAny goods returned are subject to a written agreement between our Company and the Customer. Any goods returned without such agreement will be made available to the Customer and no credit note issued.Risks and expenses related to returned goods shall always be borne by the Customer.Any returned goods accepted, once checked, will generate at the choice of our Company:-Either a credit note prepared on behalf of the Customer-Or replacement of the goods.
6 – GUARANTEES6.1 - ScopeThe guarantee is strictly limited to the replacement of parts recognised by our factories as being faulty, excluding any damages claimed for any reason whatsoever.6.2 - ConditionsPresentation of the paid invoice is required prior to implementation of our guarantee.Any claims shall be made within 30 days subsequent to reception of the goods.6.3 - ExclusionsAny conspicuous defects, fl aws and degradation caused by normal wear-and-tear, external accident (incorrect assembly, faulty maintenance, abnormal use, etc.) and third party intervention are excluded.In the event that the Customer may touch up, or have touched up by third parties, any parts considered as faulty, no invoice or expense claim will be accepted without our prior, specifi c agreement.6.4 – Particular products In the event of manufacturing parts according to models or drawings supplied by the Customer, the latter will undertake to compensate us for any prejudice caused in pursuance of intellectual property laws (patents or registration of models).
7 - PRICES7.1 a) Standard products : i - Prices are established at the date of ordering. They are net in euros «ex works» prices excluding tax on the basis of a price list transmitted to the purchaser. Prices are rescaled according to rates of raw material supplies and labour costs as per the I.N.S.E.E. index, pursuant to current legislation, in particular in cases of open orders, staggered deliveries, etc.ii - Prices can be reviewed under the following conditions, according to the average cost price structure outlined in the table hereunder:
Each price of these products will evolve according to the following basic indexes:- Alloy steel, source SAARSTAHL website, basis September 2009 = Ao = 353€ / ton - Carbide : Umt, source METAL BULLETIN, Tungsten European Free market, basis September 2009 = Bo = USD=197,5/MTU- Cardboard: PPI, source RISI Inc. Belgium, basis September 2009 = Co = 116,00- Barrel of oil, basis September 2009 = Eo = USD 67,61/baril- Added value: INSEE consumer prices increase, basis September 2009 = Fo = 119,37The review will be implemented twice yearly, on 1st July and 1st January, by application of the following formula:P date of review = Po * { [G*(Ax/Ao)] + [H*(Bx/Bo)] + [K*(Cx/Co)] + [L*(Dx/Do)] + [M*(Ex/Eo)] + [N*(Fx/Fo)] } in which:P = reviewed pricePo = quotation price applicable on 01.01.2010x = date of review minus 4 months
7.1 b) Specifi c products:i - DIAGER and the Customer agree on a negotiated pricelist. This pricelist is based on the conditions of Article L. 441-7 of the Commercial Code, and on:-manufacturing specifi cations,
-a range of specifi c products,-a specifi c conditioning,-a volume of purchase,-and, generally, specifi c conditions.For this purpose, the Customer’s tender must detail in a suffi ciently accurate way all the above-mentioned features.ii - Prices are fi xed on the date of order. They are net, “ex-works”, before tax, on the basis of the negotiated pricelist. They are reviewed under the conditions of article 7.1.a.ii above. 7.2 – On ordering, any change in measurements, margins of tolerance, quantities, etc. will lead to automatic rescaling of the proposed price inasmuch as such changes affect such price.7.3 – Preliminary batches or prototypes are invoiced at cost price.7.4 – In the event that manufacturing is stopped at the request of the Customer for parts trials or any other reasons, stoppage times are invoiced according to current, hourly machine-rates.7.5 – Any taxes, dues or other payments pursuant to the laws of France or of any country of import or transit and any changes in such between the date of order and the date of invoice will be borne by the purchaser.Postage and shipping will be borne by the purchaser unless a prior written agreement of the supplier is obtained.
8 – PAYMENT TERMS8.1 – Goods are payable at our registered offi ce. However, for the fi rst year of commercial relations, payment of the outstanding balance is at 30 days of invoice. Furthermore, our Company will notify the Customer of the credit limit granted to it.8.2 – While making the payment, the Customer will specify the detail of the regulated invoices.Any sum unpaid by the Customer at due date will generate penalties calculated on an interest rate fi xed at three times the legal rate. Such penalties are payable ipso jure, simply upon request by our Company.Moreover, our Company reserves the right on the one part to refer to the relevant jurisdiction in order to put a stop to such failure, subject to a daily penalty applicable to each day of delay in payment and, on the other part, to amend the payment terms granted to the Customer in order to obtain a cash payment for the following orders. 8.3 – In the event of contentious proceedings, in order to recover an unpaid receivable, a 15% surcharge will be applied to the sum owed for prejudice and business disturbance, any taxes being payable in addition, as damages applicable by right.8.4 - Our Company will not grant any discounts for payments in cash or earlier than the date arising here from.8.5 – If the event of an incident, the Customer shall inform our Company in writing of the details of this incident. At the end of each month, the Customer will draw up a monthly list of incidents not dealt with by our Company. Our Company must have previously acknowledged any incident in writing for compensation to be paid.8.6 – In relation to amounts that may be owed by DIAGER to the Customer, DIAGER, after having given its agreement under the form of a credit note (or the reception of an invoice for services provided by the customer and compliant with the contractual terms), authorises the Customer to operate a compensation between the amounts due by DIAGER and those due to DIAGER by the Customer.
9 – OWNERSHIP RESERVEThe seller reserves the right of ownership to the goods until principal and interest are fully paid up. Failing payment of the price at the agreed due date, our Company may recover the goods, the sale being annulled by right, as our Company sees fi t, and any down payments will become ours by right in return for use of the goods obtained by the Customer and in order to cover any losses related to resale.Suspension of payments by the Customer will render the authority to resell null and void. Failure to pay any instalment whatsoever will entail an indistinct claim to the goods, equivalent to the unpaid amount.
10 – ACT OF GOD (force majeure)The occurrence of force majeure will result in suspension of performance of its contractual obligations by our Company. Force majeure is any event that is independent of our Company’s will, obstructing its normal running at the stage of manufacturing or dispatching the goods. The following are considered as cases of force majeure: total or partial strikes hindering the correct operation of our Company or of any suppliers, subcontractors or haulers and interruption of transportation, energy supplies, raw materials or spare parts. In such circumstances, our Company will notify the Customer within 72 hours of the date of occurrence of events, the contract binding our Company and the Customer being suspended by right, with no compensation as of occurrence of the event.
11 – PARTNERSHIP ON SPECIFIC PRODUCTSAccording to Article L. 441-7 of the French Commercial Code, when engaged into commercial relations over specifi c products, DIAGER and the Customer agree to sign a partnership agreement, which will include all legal obligations, a reminder of the present general terms of trading, in particular the negotiated pricelist outlined in Article 7.1 b) i as well as the price review set out in Article 7.1. b) ii, and the following provisions:- Specifi cations incorporating all the administrative, commercial and technical details, as well as the drawings to enable the manufacture, conditioning and delivery of the products,- Duration: the contract covers a period of one years from the date of the Customer’s fi rst order. The duration will be extended tacitly for an equivalent period, except if either party informs the other, by recorded post with proof of delivery, and at least three months before the expiry of the ongoing period, of its intention to not envisage the extension of the contract at the end of the initial period or any subsequent. - At the time of partnership termination or of a change of the range of products, the Customer undertakes to purchase, under the terms agreed, the stocks of packed products held by DIAGER as well as the packaging bearing the Customer’s brand name. Such commitment will not apply in the following events: termination of the relation at the initiative of DIAGER or termination initiated by the Customer pursuant to a proven fault ascribable to DIAGER..- Contribution to the household packaging: in compliance with the European Directive 94/62/CE modifi ed and the respective national regulations, the producer (if present on local market) or the importer of packed goods shall declare and pay the relating contribution on household packaging to the local Green Dot System (Pro Europe member).- Information conveying: in order to ensure the proper fulfi lment of the commercial relation, the Customer informs DIAGER of the details (name, address, telephone, fax, e-mail) of appointed contacts, and undertakes to notify to DIAGER any change to this list: Person in charge of the DIAGER fi le at the Customer’s, Suppliers’ accounts department.
12 – TERMINATION OF THE COMMERCIAL RELATIONS Any improper termination of the commercial relations causing a detriment to our Company will lead to compensation being due to our Company by the co-contracting party.
13 - ENVIRONMENT AND ETHICS13.1 - DIAGER undertakes to respect the environment in accordance with its certifi cation ISO 14001. 13.2 - DIAGER undertakes and requires of its Customers to also undertake to respect the fundamental principles recalled in the charter of ethics of DIAGER.
14 – ATTRIBUTION OF JURISDICTION 14.1 – Customers of FRANCEIn the event of dispute, attribution of competence is made with the courts of Besancon (25), France and this whatever the conditions of sale and the mode of payment accepted even in the event of call in guarantee or of plurality of defendants.14.2 – Customers OUT OF FRANCEAny litigation arising herefrom, in particular with regard to the validity, interpretation, execution or annulment hereof shall be settled in pursuance of the laws of France and referred to the International Chamber of Commerce (ICC) of Paris for arbitration in pursuance of Article 1455 of the new Code de Procédure Civile (French code of civil procedure).
15 – LAWS APPLICABLEThe law of France shall govern issues related to the terms and conditions of sale hereof and any sales concluded by the Company.
16 – VALIDITYThe present general terms of trading will take effect from 01.01.2010.
top related