ACTUATOR Full Service Actuator Facility...Auma, any hand-wheel operated gearbox. n All custom engineering and customer MOV sizing is done in-house with support directly from valve
Post on 04-Feb-2021
3 Views
Preview:
Transcript
www.actuatorspecialties.com
sales@actuatorspecialties.com
1620 Rose St
Monroe, MI 48162
734.242.5456 Office
734.242.5458 Fax
SPECIALTIESACTUATOR
SALES
PARTS
REPAIRS
FIELD SERVICE
Full Service Actuator Facility
n Our facility and technicians are fully equipped to handle any style actuator. Specializing in Limitorque, Rotork, EIM, Siemens, Bettis, Cutler-Hammer, Auma, any hand-wheel operated gearbox.
n All custom engineering and customer MOV sizing is done in-house with support directly from valve manufacturers to ensure proper factors are included.
n Full testing center to ensure every piece of equipment is tested satisfactory prior to leaving our facility. 575vac, 230vac, 480vac, 125vdc, 125vac/1ph. Air operated test stand. 4-20mA control signal.
Transitioning and Modifications
n Lathes, Mills, and other equipment allow us to mount your specified valve to your actuator. We ensure proper operation of the modified equipment in house whether it is a rising or non-rotating stem application.
n We are capable of turning your manual operated valve in to a motor operated valve. Just supply us your I/C and load requirements and we will do the rest.
New Sales
n We are an independently operated facility, not tied to any one manufacturer or territory. Therefore, we can help you pick the right piece of equipment for your needs, not out of ‘our’ catalog.
Surplus Refurbished Unit Sales
n We may be able to offer you refurbished Limitorque, Rotork, and EIM actuators. With exceeding or same warranty as the manufacturer we are able to meet better deliveries and costs. Built and tested all here at our shop.
Safety Programs
n We are members of both ISN Networld and PICS Auditing. End-User insurance and safety verification third party companies.
On-Site Trailer Repair
n We are able to offer you an on-site trailer for mobile repairs and preventative maintenance checks during your outage when actuators leaving the plant are not ideal. Capabilities include chemical cleaning for most sized actuators, machining, fabricating, and also electrical testing when 480v supply is available.
Contact COREY or MALLORY with your next actuation opportunity!734.242.5456 OFFICE
SALES@ACTUATORSPECIALTIES.COM
Modifying 16" 2500 Edwards Flite Flow from Handwheel operated to Motor Operated and supplying the SMB-4T, meeting the customer’s required two week lead time.
All manufacturer’s logos are registered trademarks to their perspective company.
Limitorque Actuation Systems
top related