Transcript
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6314C3 / 6314C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8SAC50 kgB5 TJ80BC50 kgV1 TJ80PC50 kgB3/B5 TJ8SCC50 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
2Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
4.0PB5.4/5.5(VL-451)
440 380 220
Project Name GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 280S Rated Output 110 150kW
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0
169.7650
92.6 Indoor Outdoor 94.0
50% Load
Current Full Load
Temp. Rise at full load (by resistance method)
Rated Frequency3
Rated Voltage
at 1.0 S.F 80
1000 Altitude
Efficiency
Number of Phases Insulation Class
75% Load
94.5 %80 Power Factor(p.u)40 50% Load 0.896
1.15 Speed at Full Load 3570 r.p.m
0.900100% Load
150 %
12.350
765
800800
730
kg·mkg·m
2.2times
90 dB(A)
Load(Max.)
Full Load 30.0
650650
75% Load100% Load
%
Type Enclosure(Protection) Method of Cooling
HS-110/2( IP55
339.4
Motor Location
Hot
REMARK
mm/sec (r.m.s)Cold 3
2 times
2.100
Relative Humidity Ambient Temp. Duty Type
APPD
%
kg·m
250
0.900 Service Factor
CHKD
196.5
K.J. KANG
Date DSND CHKD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM
Breakdown**
%
Number of Poles Rotor Type
Motor
Locked-rotor**
Torque
2
2
Type : HS kW 2 P 60 Hz
Full Load Torque : 30.0 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 2.100 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 12.350 Kg.m2 Full Load Current 169.7A 196.5A 339.4A
RM-P251-133 A4(210mm x 297mm)
110
3570
CURVE NO.
P-HS-110/2PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8SAP51 kgB5 TJ80BP51 kgV1 TJ80PP51 kgB3/B5 TJ8SCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
199.9172.7730
%
94.2
kg·m
230Locked-rotor**Breakdown**
180 %
345.3
Torque
730730
75% Load100% Load
%
CHKD APPD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM K.J. KANG
Date DSND CHKD
Type Enclosure(Protection) Method of Cooling
Motor Location
Number of Phases Insulation Class
1.1575% Load
Full Load 60.0
Altitude Relative Humidity Ambient Temp. Duty Type Service Factor
Speed at Full Load 1785 r.p.m100% Load 0.880
times
3.023 kg·m
Hot 2
REMARK
2.2 mm/sec (r.m.s)Cold 3 times
725
760760
690
84 dB(A)
Load(Max.) 78.200 kg·m Motor
0.855
80 Power Factor(p.u)40 50% Load 0.780
%1000 95.0 %
PERFORMANCE DATA Frame Size 280S Rated Output
IP55HS-110/4 Number of Poles
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0 Project Name
94.9
Rated Frequency3
Rated Voltage
at 1.0 S.F
380 220
110 150kW GENERAL SPECIFICATION
4Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
Rotor Type
440
(
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4.0PB5.4/5.5(VL-451)
Full Load
Temp. Rise at full load (by resistance method) Efficiency
Indoor Outdoor80 50% Load
Current
2
2
Type : HS kW 4 P 60 Hz
Full Load Torque : 60.0 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 3.023 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 78.200 Kg.m2 Full Load Current 172.7A 199.9A 345.3A
RM-P251-133 A4(210mm x 297mm)
110
1785
CURVE NO.
P-HS-110/4PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8MAP51 kgB5 TJ80BP51 kgV1 TJ80PP51 kgB3/B5 TJ8MCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
6Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
4.0PB5.4/5.5(VL-451)
440 380 220
Project Name GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 280M Rated Output 110 150kW
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0
176.7700
94.7 Indoor Outdoor 95.1
50% Load
Current Full Load
Temp. Rise at full load (by resistance method)
Rated Frequency3
Rated Voltage
at 1.0 S.F 80
1000 Altitude
Efficiency
Number of Phases Insulation Class
75% Load
95.0 %80 Power Factor(p.u)40 50% Load 0.797
1.15 Speed at Full Load 1185 r.p.m
0.860100% Load
170 %
204.975
805
840840
770
kg·mkg·m
2.2times
80 dB(A)
Load(Max.)
Full Load 90.4
700700
75% Load100% Load
%
Type Enclosure(Protection) Method of Cooling
HS-110/6( IP55
353.3
Motor Location
Hot
REMARK
mm/sec (r.m.s)Cold 3
2 times
4.943
Relative Humidity Ambient Temp. Duty Type
APPD
%
kg·m
250
0.849 Service Factor
CHKD
204.6
K.J. KANG
Date DSND CHKD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM
Breakdown**
%
Number of Poles Rotor Type
Motor
Locked-rotor**
Torque
2
2
Type : HS kW 6 P 60 Hz
Full Load Torque : 90.4 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 4.943 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 204.975 Kg.m2 Full Load Current 176.7A 204.6A 353.3A
RM-P251-133 A4(210mm x 297mm)
110
1185
CURVE NO.
P-HS-110/6PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6314C3 / 6314C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8MAC50 kgB5 TJ80BC50 kgV1 TJ80PC50 kgB3/B5 TJ8MCC50 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
231.9200.3700
%
92.8
kg·m
250Locked-rotor**Breakdown**
150 %
400.6
Torque
700700
75% Load100% Load
%
CHKD APPD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM K.J. KANG
Date DSND CHKD
Type Enclosure(Protection) Method of Cooling
Motor Location
Number of Phases Insulation Class
1.1575% Load
Full Load 36.0
Altitude Relative Humidity Ambient Temp. Duty Type Service Factor
Speed at Full Load 3570 r.p.m100% Load 0.915
times
2.400 kg·m
Hot 2
REMARK
2.2 mm/sec (r.m.s)Cold 3 times
835
870870
800
92 dB(A)
Load(Max.) 14.375 kg·m Motor
0.915
80 Power Factor(p.u)40 50% Load 0.912
%1000 94.5 %
PERFORMANCE DATA Frame Size 280M Rated Output
IP55HS-132/2 Number of Poles
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0 Project Name
94.1
Rated Frequency3
Rated Voltage
at 1.0 S.F
380 220
132 175kW GENERAL SPECIFICATION
2Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
Rotor Type
440
(
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4.0PB5.4/5.5(VL-451)
Full Load
Temp. Rise at full load (by resistance method) Efficiency
Indoor Outdoor80 50% Load
Current
2
2
Type : HS kW 2 P 60 Hz
Full Load Torque : 36.0 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 2.400 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 14.375 Kg.m2 Full Load Current 200.3A 231.9A 400.6A
RM-P251-133 A4(210mm x 297mm)
132
3570
CURVE NO.
P-HS-132/2PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8MAP51 kgB5 TJ80BP51 kgV1 TJ80PP51 kgB3/B5 TJ8MCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
4.0PB5.4/5.5(VL-451)
440 380 220
Project Name GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 280M Rated Output 132 175kW
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0
207.2670
94.4 Indoor Outdoor 95.0
50% Load
Current Full Load
Temp. Rise at full load (by resistance method)
Rated Frequency3
Rated Voltage
at 1.0 S.F 80
1000 Altitude
Efficiency
Number of Phases Insulation Class
75% Load
95.0 %80 Power Factor(p.u)40 50% Load 0.848
1.15 Speed at Full Load 1785 r.p.m
0.880100% Load
180 %
111.825
775
810810
740
kg·mkg·m
2.2times
85 dB(A)
Load(Max.)
Full Load 72.0
670670
75% Load100% Load
%
Type Enclosure(Protection) Method of Cooling
HS-132/4( IP55
414.4
Motor Location
Hot
REMARK
mm/sec (r.m.s)Cold 3
2 times
3.415
Relative Humidity Ambient Temp. Duty Type
APPD
%
kg·m
230
0.878 Service Factor
CHKD
239.9
K.J. KANG
Date DSND CHKD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM
Breakdown**
%
Number of Poles Rotor Type
Motor
Locked-rotor**
Torque
2
2
Type : HS kW 4 P 60 Hz
Full Load Torque : 72.0 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 3.415 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 111.825 Kg.m2 Full Load Current 207.2A 239.9A 414.4A
RM-P251-133 A4(210mm x 297mm)
132
1785
CURVE NO.
P-HS-132/4PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8LAP51 kgB5 TJ8LBP51 kgV1 TJ8LPP51 kgB3/B5 TJ8LCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
242.7209.6650
%
95.0
kg·m
230Locked-rotor**Breakdown**
180 %
419.1
Torque
650650
75% Load100% Load
%
CHKD APPD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM K.J. KANG
Date DSND CHKD
Type Enclosure(Protection) Method of Cooling
Motor Location
Number of Phases Insulation Class
1.1575% Load
Full Load 108.5
Altitude Relative Humidity Ambient Temp. Duty Type Service Factor
Speed at Full Load 1185 r.p.m100% Load 0.870
times
5.753 kg·m
Hot 2
REMARK
2.2 mm/sec (r.m.s)Cold 3 times
925
960960
890
80 dB(A)
Load(Max.) 224.250 kg·m Motor
0.851
80 Power Factor(p.u)40 50% Load 0.750
%1000 95.0 %
PERFORMANCE DATA Frame Size 280L Rated Output
IP55HS-132/6 Number of Poles
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0 Project Name
95.1
Rated Frequency3
Rated Voltage
at 1.0 S.F
380 220
132 175kW GENERAL SPECIFICATION
6Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
Rotor Type
440
(
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4.0PB5.4/5.5(VL-451)
Full Load
Temp. Rise at full load (by resistance method) Efficiency
Indoor Outdoor80 50% Load
Current
2
2
Type : HS kW 6 P 60 Hz
Full Load Torque : 108.5 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 5.753 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 224.250 Kg.m2 Full Load Current 209.6A 242.7A 419.1A
RM-P251-133 A4(210mm x 297mm)
132
1185
CURVE NO.
P-HS-132/6PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6314C3 / 6314C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8LAC50 kgB5 TJ8LBC50 kgV1 TJ8LPC50 kgB3/B5 TJ8LCC50 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
2Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
4.0PB5.4/5.5(VL-451)
440 380 220
Project Name GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 280L Rated Output 160 214kW
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0
241.5650
93.8 Indoor Outdoor 94.8
50% Load
Current Full Load
Temp. Rise at full load (by resistance method)
Rated Frequency3
Rated Voltage
at 1.0 S.F 80
1000 Altitude
Efficiency
Number of Phases Insulation Class
75% Load
95.0 %80 Power Factor(p.u)40 50% Load 0.912
1.15 Speed at Full Load 3570 r.p.m
0.915100% Load
150 %
14.375
895
930930
860
kg·mkg·m
2.2times
92 dB(A)
Load(Max.)
Full Load 43.7
650650
75% Load100% Load
%
Type Enclosure(Protection) Method of Cooling
HS-160/2( IP55
483.0
Motor Location
Hot
REMARK
mm/sec (r.m.s)Cold 3
2 times
2.540
Relative Humidity Ambient Temp. Duty Type
APPD
%
kg·m
230
0.915 Service Factor
CHKD
279.7
K.J. KANG
Date DSND CHKD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM
Breakdown**
%
Number of Poles Rotor Type
Motor
Locked-rotor**
Torque
2
2
Type : HS kW 2 P 60 Hz
Full Load Torque : 43.7 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 2.540 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 14.375 Kg.m2 Full Load Current 241.5A 279.7A 483.1A
RM-P251-133 A4(210mm x 297mm)
160
3570
CURVE NO.
P-HS-160/2PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8LAP51 kgB5 TJ8LBP51 kgV1 TJ8LPP51 kgB3/B5 TJ8LCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
290.8251.1670
%
94.6
kg·m
230Locked-rotor**Breakdown**
170 %
502.3
Torque
670670
75% Load100% Load
%
CHKD APPD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM K.J. KANG
Date DSND CHKD
Type Enclosure(Protection) Method of Cooling
Motor Location
Number of Phases Insulation Class
1.1575% Load
Full Load 87.3
Altitude Relative Humidity Ambient Temp. Duty Type Service Factor
Speed at Full Load 1785 r.p.m100% Load 0.880
times
3.653 kg·m
Hot 2
REMARK
2.2 mm/sec (r.m.s)Cold 3 times
875
910910
840
85 dB(A)
Load(Max.) 97.250 kg·m Motor
0.875
80 Power Factor(p.u)40 50% Load 0.810
%1000 95.0 %
PERFORMANCE DATA Frame Size 280L Rated Output
IP55HS-160/4 Number of Poles
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0 Project Name
95.1
Rated Frequency3
Rated Voltage
at 1.0 S.F
380 220
160 214kW GENERAL SPECIFICATION
4Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
Rotor Type
440
(
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4.0PB5.4/5.5(VL-451)
Full Load
Temp. Rise at full load (by resistance method) Efficiency
Indoor Outdoor80 50% Load
Current
2
2
Type : HS kW 4 P 60 Hz
Full Load Torque : 87.3 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 3.653 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 97.250 Kg.m2 Full Load Current 251.1A 290.8A 502.3A
RM-P251-133 A4(210mm x 297mm)
160
1785
CURVE NO.
P-HS-160/4PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8XAP51 kgB5 TJ8XBP51 kgV1 TJ8XPP51 kgB3/B5 TJ8XCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
6Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
4.0PB5.4/5.5(VL-451)
440 380 220
Project Name GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 280LL Rated Output 160 214kW
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0
254.0650
95.0 Indoor Outdoor 95.1
50% Load
Current Full Load
Temp. Rise at full load (by resistance method)
Rated Frequency3
Rated Voltage
at 1.0 S.F 80
1000 Altitude
Efficiency
Number of Phases Insulation Class
75% Load
95.0 %80 Power Factor(p.u)40 50% Load 0.842
1.15 Speed at Full Load 1185 r.p.m
0.870100% Load
170 %
224.250
1135
11701170
1100
kg·mkg·m
2.2times
80 dB(A)
Load(Max.)
Full Load 131.5
650650
75% Load100% Load
%
Type Enclosure(Protection) Method of Cooling
HS-160/6( IP55
508.0
Motor Location
Hot
REMARK
mm/sec (r.m.s)Cold 3
2 times
7.288
Relative Humidity Ambient Temp. Duty Type
APPD
%
kg·m
230
0.860 Service Factor
CHKD
294.1
K.J. KANG
Date DSND CHKD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM
Breakdown**
%
Number of Poles Rotor Type
Motor
Locked-rotor**
Torque
2
2
Type : HS kW 6 P 60 Hz
Full Load Torque : 131.5 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 7.288 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 224.250 Kg.m2 Full Load Current 254.0A 294.1A 508.0A
RM-P251-133 A4(210mm x 297mm)
160
1185
CURVE NO.
P-HS-160/6PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6314C3 / 6314C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8XAC50 kgB5 TJ8XBC50 kgV1 TJ8XPC50 kgB3/B5 TJ8XCC50 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
349.6301.9630
%
93.8
kg·m
230Locked-rotor**Breakdown**
150 %
603.8
Torque
630630
75% Load100% Load
%
CHKD APPD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM K.J. KANG
Date DSND CHKD
Type Enclosure(Protection) Method of Cooling
Motor Location
Number of Phases Insulation Class
1.1575% Load
Full Load 54.6
Altitude Relative Humidity Ambient Temp. Duty Type Service Factor
Speed at Full Load 3570 r.p.m100% Load 0.915
times
3.595 kg·m
Hot 2
REMARK
2.2 mm/sec (r.m.s)Cold 3 times
1135
11701170
1100
92 dB(A)
Load(Max.) 19.550 kg·m Motor
0.915
80 Power Factor(p.u)40 50% Load 0.912
%1000 95.0 %
PERFORMANCE DATA Frame Size 280LL Rated Output
IP55HS-200/2 Number of Poles
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0 Project Name
94.9
Rated Frequency3
Rated Voltage
at 1.0 S.F
380 220
200 268kW GENERAL SPECIFICATION
2Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
Rotor Type
440
(
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4.0PB5.4/5.5(VL-451)
Full Load
Temp. Rise at full load (by resistance method) Efficiency
Indoor Outdoor80 50% Load
Current
2
2
Type : HS kW 2 P 60 Hz
Full Load Torque : 54.6 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 3.595 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 19.550 Kg.m2 Full Load Current 301.9A 349.6A 603.8A
RM-P251-133 A4(210mm x 297mm)
200
3570
CURVE NO.
P-HS-200/2PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
Item No. Rev. No. [ ] Project No. Quantity sets
HPsin
)D.O.L Y-
V V VA A A
F B H Locked-rotor** % % %
deg. C sinsin
Less than meter sinLess than %
deg. C (Max.) sinContinuous ( S1 ) sin
sin Mounting B3 B5 V1 B3/B5 sin
Type Anti-Friction Bearing DE/N-DE 6318C3 / 6316C3 sin
Lubricant Grease(Gadus S2 V 100 2) sin External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) Shaft Extension Single Double Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor)
Location Refer to Outline Drawing Application Vibration Area classification Non-Hazardous Permissible number of Type of Ex-Protection Not applicable consecutive starts Applicable Standard KS,IEC,NEMA MG1 Part30(Vpeak) Paint Munsell No. ACCESSORIES SUBMITTAL DRAWING
Outline Dimension Drawing \ Motor Weight(Approx.)B3 TJ8XAP51 kgB5 TJ8XBP51 kgV1 TJ8XPP51 kgB3/B5 TJ8XCP51 kg
Main T-Box Ass'y 3M-016882
SPARE PARTS High Efficiency*. For use on PWM VFD 10:1VT, 3:1CT@1.0S.F&F Temp. rise
HHI W230-131-1 * In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests. A4(210mm X 297mm)
Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.
4Totally Enclosed Squirrel CageIC411(FC) Starting Method*
60 Hz
4.0PB5.4/5.5(VL-451)
440 380 220
Project Name GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 280LL Rated Output 200 268kW
AC INDUCTION MOTOR DATA SHEET
Model No.or RFQ No. 0
312.1630
94.5 Indoor Outdoor 95.0
50% Load
Current Full Load
Temp. Rise at full load (by resistance method)
Rated Frequency3
Rated Voltage
at 1.0 S.F 80
1000 Altitude
Efficiency
Number of Phases Insulation Class
75% Load
95.0 %80 Power Factor(p.u)40 50% Load 0.860
1.15 Speed at Full Load 1785 r.p.m
0.885100% Load
170 %
139.850
1135
11701170
1100
kg·mkg·m
2.2times
85 dB(A)
Load(Max.)
Full Load 109.1
630630
75% Load100% Load
%
Type Enclosure(Protection) Method of Cooling
HS-200/4( IP55
624.3
Motor Location
Hot
REMARK
mm/sec (r.m.s)Cold 3
2 times
5.488
Relative Humidity Ambient Temp. Duty Type
APPD
%
kg·m
220
0.880 Service Factor
CHKD
361.4
K.J. KANG
Date DSND CHKD
2010-05-28 R.G. KIM O.J. KIM J.H. KIM
Breakdown**
%
Number of Poles Rotor Type
Motor
Locked-rotor**
Torque
2
2
Type : HS kW 4 P 60 Hz
Full Load Torque : 109.1 Kg.m Speed at Full Load : RPM
Motor moment of Inertia (J) : 5.488 Kg.m2 Rated Voltage 440V 380V 220V
Load moment of Inertia (J) : 139.850 Kg.m2 Full Load Current 312.1A 361.4A 624.3A
RM-P251-133 A4(210mm x 297mm)
200
1785
CURVE NO.
P-HS-200/4PERFORMANCE CURVE
TORQUE
CURRENT
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
0 10 20 30 40 50 60 70 80 90 100
CU
RR
ENT
IN %
TOR
QU
E IN
%
SPEED IN %
SPEED VS TORQUE & CURRENT CURVE
EFF.
P.F
CURRENT
0
20
40
60
80
100
120
140
160
180
200
0
10
20
30
40
50
60
70
80
90
100
0 25 50 75 100 125
CU
RR
ENT
IN %
EFF.
& P
.F IN
%
LOAD IN %
OUTPUT VS EFF., P.F & CURRENT CURVE
top related