absolute towers | surface articulation part b *issue with ...laurawhittingham.ucalgaryblogs.ca/files/2016/11/Surface-Articulation... · articulation was placed on the building surface,
Post on 18-Oct-2020
2 Views
Preview:
Transcript
absolute towers | surface articulation | part b
create surface divide domain + isotrim + deconstruct brep
create points at the centroid - original pseudo code had the points on the edges + verticies of the grid
*issue with attractor: initially working, on selected surface, however, when the articulation was placed on the building surface, portions had to be flatted + grafted in order to read properly. this caused a circuit issue with the attractor + was unable to flatten/graft the centroid parameter after analyzing the panels (see grasshopper file), as the system kept repeatedly crashing over several hours + on multiple computers.
scale factor 47scale factor of 7low v countU count 2, V count 7
decrease scaleelipse sizeincrease scale square
input selected shape in the centroid
input attractor point(s) - manipulate the scale of the ellipses based on the attractor's distance
shape of openings loft + apply to surface of building
surfacetower
top related