3D machining 2 Contents. Import model View of the parts model Folder of imported model items Import geometry model Contents.
Post on 28-Mar-2015
222 Views
Preview:
Transcript
3D machining 23D machining 2
Contents
Import modelImport model
View of the part’s model
Folder of imported model items
Import geometry model
Contents
Workpiece setupWorkpiece setup
Workpiece parameters tab
Create workpiece by extruding a closed curve
Top and bottom levels of the workpiece
Workpiece contour’s closed curve
Workpiece contour Workpiece model
Contents
Create operationCreate operation
Create operation menu
Roughing waterline
Roughing operations
New Roughing waterline operation
Contents
Part parameters tab
Part and WorkpiecePart and Workpiece
SprutCAM uses the contents of the Model folder as the Part for machining by default. The default workpiece is a prism box around part the Part. Workpiece can be imported from external source as well.
Use part of previous operation
Workpiece parameters tab
Use result of previous operation as workpiece
Contents
Operation parametersOperation parameters
Parameters of the active operation
Active operation
Contents
Operation parametersOperation parameters
Contents
ToolpathToolpath
Calculate toolpath
Toolpath
Toolpath calculated without errors
Contents
Machining simulationMachining simulation
Continuous simulation
Result of simulation
Contents
Create operationCreate operation
Create operation
Roughing waterline
Roughing operations
New Roughing waterline operation
Contents
Job assignmentJob assignment
Job assignment parameters tab
Contour created with the built-in 2D Geometry drafting system
View of the work area with workpiece
A closed contour limiting the machined area to the groove on the part is used as the Job assignment.
Contents
Machining parametersMachining parameters
Contents
Toolpath calculationToolpath calculation
Run toolpath calculation
Toolpath
Indicates calculation success
Contents
Machining simulationMachining simulation
Continuous simulation
Result of previous operation
Result of machining simulation
Contents
Create operationCreate operation
Create operation
Finishing Complex
Finishing operations
New Finishing Complex operation consists of two operations – Finishing plane and Finishing waterline operations
Contents
Machined part and workpieceMachined part and workpiece
The part for the Finishing complex operation is the part from previous operations. The workpiece is the machining result of previous operations.
Machined part
Use part of the previous operation
Workpiece parameters
Use machining result of the previous operation
Contents
Finishing plane parametersFinishing plane parameters
Contents
Finishing waterline parametersFinishing waterline parameters
Contents
ToolpathToolpath
Calculate ToolpathCalculation is successfull
Toolpath of the Finishing plane operation
Toolpath of the Finishing complex operation
Toolpath of the Finishing waterline operation
Contents
Continuous simulation
Machining result
Machining simulationMachining simulation
Contents
Create new operation
Finishing drive (rest)
Rest machining operations
New Finishing drive (rest) operation
Create operationCreate operation
Contents
Part and WorkpiecePart and Workpiece
The part for the Finishing drive (rest) operation is the part of previous operations. The workpiece is the machining result of previous operations.
Machined part
Reference to the part model
Workpiece
Reference to machining result of previous operations
Contents
Finishing drive (rest) parametersFinishing drive (rest) parameters
Contents
Toolpath calculationToolpath calculation
Calculate toolpath
Calculation is sucessful
Rest areas machined by the finishing drive(rest) operation
Contents
Machining simulationMachining simulation
Blue colored areas are machined by the Finishing drive (rest) operation
Continuous simulation
Contents
Machining simulation for each operationMachining simulation for each operation
Finishing result of machining
Contents
Tools list compilingTools list compiling
Create Tools list
Tools list dialogViews configuration
Objects visibility panelDocument pattern
Contents
Tools listTools list
Technology operations
Document header
List of tools
Machining time
Views of model geometry
Contents
PostprocessorsPostprocessors
Create NC-program
Postprocessor configuration file
File of the NC-program
NC-program code listing
Contents
top related