2017 Williams Gun Sight Catalog - Desert Eagle Shooterss Gun Sights.pdf · self defense pistol firesights target pistol firesights ace in the hole/ shotgun & rifle firesights firesight
Post on 24-Apr-2018
281 Views
Preview:
Transcript
2 3
NEW & FEATURED PRODUCTS
SELF DEFENSE PISTOL FIRESIGHTS
TARGET PISTOL FIRESIGHTS
ACE IN THE HOLE/SHOTGUN & RIFLE FIRESIGHTS
FIRESIGHT PEEP SETS/FIRESIGHT FRONT SIGHTS
MUZZLELOADER FIRESIGHTS/MILITARY SIGHTS
FP SERIES PEEP SIGHTS
TARGET FP SERIES
5D SERIES RECEIVER SIGHTS/WGRS SERIES RECEIVER SIGHTS
OPEN SIGHTS
STREAMLINED RAMPS/GUNSMITHING TOOLS
QUICK CONVERTIBLE SIDE MOUNTS/SIDE MOUNT RINGS
BEADS,TAPS, DRILLS, & KITS/WEBSITE INFORMATION
As we enter 2017, Williams Gun Sight Company will be celebrating our 91st year in the firearm industry. Such an accomplishment would not have been possible without the hardwork and dedication of hundreds of employees and thousands of loyal customers over the years.
Even though we are growing older, Williams is not slowing down. Williams will be expanding our R&D efforts and introducing new products to the market place throughout 2017. The future looks bright for Williams Gun Sight Company. I would like to personally thank our current and future family of employees and customers.
Thank You,
Tom Wright Owner/President Williams Gun Sight Company
2-3
4-5
6-7
8-9
10-11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
RUGER AMERICAN TARGET FPFor Ruger American 22lr rimfire with standard or compact barrel. WMS #71078 TARGET REAR....................................................$86.95WMS #71079 TARGET GLOBE FRONT.....................................$69.95
GLOCK 42 & 43 FIRESIGHTSAnti-snag design, fiber optics, fast acquisitionWMS #71033...........................................................................$49.95
RUGER LCR FIRESIGHTAnti-snag design, fiber optic, fast acquisition. Fits only .38, .357,and 9mm models.WMS #71029...........................................................................$34.95
RUGER SR1911 FIRESIGHTSAnti-snag design, fiber optic, fast acquisition.WMS #71030...........................................................................$49.95
RUGER AMERICAN PISTOLAnti-snag design, fiber optic, fast acquisition. Fits 9mm & 45 Full Size and Compact models. WMS #71072...........................................................................$49.95
UNIVERSAL “GHOST RING” FIRESIGHTSBrilliant in low light, Faster acquisition compared to standard sights, No gunsmithing required.WMS #71036...........................................................................$39.95
AR-15 FIRESIGHTSHigh visibility, Elevation adjustment, no gunsmithing required.WMS #70229...........................................................................$45.95
TAURUS MILLENNIUM G2 SERIESAnti-snag design, fiber optic, fast acquisition WMS #71061...........................................................................$49.95
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
2 3
4 5
TAURUSTaurus 1911’sTaurus Millennium G2 SeriesTaurus PT111, PT140, PT145, PT132, PT138 (Screw-on style sights)Taurus Pro w/ Dovetail PT111, PT140, PT145, PT745, 24-7’s (Excludes G2)
70947710617026870897
$49.95$49.95$49.95$49.95
RUGERRuger LCR (Only for .38, .357, 9mm models)
Ruger P-Series (Excludes P-85 Gunsmithing Required)
Ruger American - 9mm & 45 - Full size & CompactRuger LC9 & LC380
Ruger SR191171029
56360
7107247499
71030 $49.95$49.95
$49.95$49.95
$34.95
SMITH & WESSONS&W SD 9 & 40 VES&W M&P Shield 9mm, 40, & 45S&W M&P .22lr Full Size
709947097270985
$49.95$49.95$49.95
S&W M&P’s (Fits all M&P’s except M&P 22’s) S&W Bodyguard .380ACP
7091570993
$49.95$49.95
GLOCKGlock 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38, 39
Glock 42, 43Glock 20, 21, 29, 30, 31, 32, 36, 41
56359
7103371032
$49.95
$49.95$49.95
FNH
FNH: FNX-9, FNP-9, FNS-40
FNH: FNX-40, FNP-40, FNS -40FNH: FNX-45, FNP-45, (Not Tactical)
710637106270991
$49.95$49.95$49.95
SPRINGFIELD ARMORYSpringfield XD, XDM (Excludes Tactical Models)Springfield XDS (Rear Only)
7027270988 $26.95
$49.95
COLTColt Government Model Series 80 (Staked Front)56362 $49.95
KAHRKahr (Excludes CW & CM Series)70944 $49.95
KIMBERKimber 1911 (Fixed sight guns, excludes SIS)70943 $49.95
ANTI-SNAG DESIGN
HIGH-VISIBILITY FIBER OPTICS
IMPROVED VISIBILITY
CNC MACHINED HIGH GRADE ALUMINUM
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
4 5
6 7
SMITH & WESSONS&W M&P .22 Compact (Elevation Only)
S&W SD9 and SD40
S&W M&Ps (Excludes Shield, Competition, and .22lr’s)S&W M&P .22lr Full Size
71031709627098670995
$59.95$62.95$62.95$62.95
RUGERMK II & MK III Bull Barrel, Govt, Slabside, & 22/45 w/ adj. sights (Pre 2015)
MK III Bull Barrel, Govt, Slabside, & 22/45 w/ adj. sights (Post 2015 w/ Eagle Logo)Ruger new model Single Six 22lrRuger SR22 (Elevation Only)Ruger SR9, SR40, SR9C, SR40C, and SR45Ruger P-Series (Excludes P85)
Ruger MK II & MK III 6 7/8” Taper BarrelRuger MK III 22/45 Lite (Pre 2015)Ruger 22/45 Lite & MK IV (Post 2015)
Ruger GP100, Redhawk, Super Redhawk (Except Alaskan), Super Blackhawk Hunter70957
7105470960709877094170967
709597101371053
70958 $62.95$62.95$62.95$62.95
$62.95
$62.95$62.95$59.95$62.95$62.95
GLOCKGlock (All models except 42 & 43)70961 $62.95
SPRINGFIELD ARMORYSpringfield XD, XDM (Excludes tactical models)70963 $62.95
BROWNING BUCKMARKBrowning Buckmark
Browning Buckmark
(Rear sight length over one inch. Excludes Target, 5.5 Field & target, Challenge & Commemorative models, hunter & Contour 5.5)
(Rear sight length less than one inch. Excludes Target, 5.5 Field & target, Challenge & Commemorative models, hunter & Contour 5.5)
70231
70232
$62.95
$62.95
COLTColt Series 8070965 $62.95
DESERT EAGLEDesert Eagle, fits USA made with DE or DC Serial number prefix70996 $62.95
OTHERTAURUS Pro w/ Dovetail PT111, PT140, PT145, PT809, PT745, 24-7’s (Excludes G2)
70969 $62.95
SIG SAUER P220, P225, P226, P228 (Excludes X5 Series)70966 $62.95FN FNH, FNX, FNS70992 $62.95
CLICK ADJUSTMENT DESIGN
CNC MACHINED HIGH GRADE ALUMINUM
HIGH-VISIBILITY FIBER OPTICSIMPROVED LOW LIGHT VISIBILITY
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
6 7
8 9
70974 Ruger 10/22 $64.95$64.95$64.95
$59.95
$59.95
$64.95
$59.95
$49.95
$39.95
$49.95
$39.95
$29.95
$29.95
$31.95
$31.95
$37.95$33.95$37.95
$35.95
7097570976
70978
70977
71008
71009
71034
71036
71035
70230
56530
70267
70916
70917
702396637070234
66651
Marlin 336 w/ Front Ramped SightsMossberg 500 w/ Front Ramped Sight (May require drilling & tapping)
CVA Accura, Optima, Wolf & Apex (Front Not Included)
Traditions Vortex, Pursuit & Buckstalker (Front Not Included)
Remington 870 (May require drilling & tapping)
T/C Encore, Prohunter, Omega, Endeavor, Impact, & Triumph (Front not included)
Remington 870 (May require drilling & tapping)
Universal Firesight Ghost Ring Set
Mossberg 500 (May require drilling & tapping)
Universal Firesight Open Slugger
Remington - Pre 2003 Rifiles, Muzzleloaders, and all ShotgunsRemington - Post 2003 Rifles, and Muzzleloaders w/ 1pc rampRemington Ghost Ring - Pre 2003 Rifles, Muzzleloaders, and all ShotgunsRemington Ghost Ring - Post 2003 Rifles, Muzzleloaders, w/ 1pc. ramp
Browning BLRMossberg 500Ithaca 37 Deerslayer
Winchester 1300 Firesight Set
ACE IN THE HOLE SCOPE BASE SET
UNIVERSAL “GHOST RING” AND UNIVERSAL “SLUGGER” FIRESIGHTS
SHOTGUN & RIFLE FIRESIGHTS
Designed for self defense shotguns and provides the “Ace in the Hole” backup aperture sight if something goes wrong with your primary sighting option. *Does not come with front sight. - Picatinny scope rail.- Firesight ghost ring for fast acquisition.- Windage and elevation adjustment.- Can be used with or without front ramp.
ACE IN THE HOLE - TACTICAL(DOES NOT INCLUDE FRONT SIGHT)
Our universal Firesight Ghost Ring is perfect for turkey, deer, and personal protection. A shooter’s focus automatically goes towards center and with our fiber optic ghost ring it makes for faster acquisition on target. Both our Ghost Ring and Slugger models provide amazing low light visibility, adjustable windage and elevation, attach to vent rib and NO gunsmithing is required. Excludes Remington Versa Max.
CNC MACHINED HIGHGRADE ALUMINUM
INTERCHANGEABLE APERTURES AND GHOST RINGS
PICATINNY SCOPE RAIL W/INTEGRAL BACKUP SIGHT
UNIVERSAL GHOST RING
UNIVERSAL SLUGGER FIRESIGHT
REMINGTON W/ GHOST RING
MOSSBERG
REMINGTON
ADJUSTABLE FOR WINDAGE AND ELEVATION
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
8 9
10 11
$49.95
$83.95
$25.95
$39.95
$37.95
$39.95
$49.95
$83.95
$19.95
$83.95
$29.95
$53.95
$29.95
$37.95
$53.95
$52.95
$19.95
63330
$10.5070031PRICEITEM
63331
60213
71010
60217
71011
70018
70103
62261
70282
70270
70859
70742
70239
70862
70861
71012
Ruger 10/22 WGRS
Winchester 94 FP (w/ ramped front sight)
Ruger 10/22
Ruger American.22LR WGRS
Win. 94/Marlin 336 Firesight Set
Ruger American .22 Mag WGRS
Marlin 336 WGRS
Winchester 94SE FP
Win. 94/Marlin 336 Rear Sight Only
Marlin 336 FP(uses rear scopemount holes, w/ ramped front sight)
Marlin 25N & 25MN
Winchester 94 5D (For Winchester 94 Top Eject)
Marlin 925, 925M, 60 Blue, 915Y Blue, 983T, 981T, 795 Blue
Browning BLR
Winchester 94SE Ranger 5D (For Winchester 94 Side Eject w/ dovetail cut in barrel for front sight)
Marlin 336 5D (w/ ramped front sight)
Ruger American .22LR/.22 Mag(Rear Only)
FIRESIGHT RIFLE BEADS
1-PC FIRESIGHT RAMPS
FIBER OPTIC HOOD
KIT INCLUDES:
WGOS SLIDE/BLADE REPLACEMENT
FIRESIGHT ASSORTMENT KIT SAVINGS & SELECTION
RUGER
WINCHESTER
MARLIN
Steel front dovetail sight beads machined to accept Firesight light gathering rod. A must for all shooters in low light situations. Comes in a variety of heights.
For Williams’ Streamlined Ramps. Hood Only.
NOTE: INSTALLATION OF DOVETAILED FRONT SIGHTS IN RAMPS AND ESPECIALLY DOVETAILED BARRELS ALMOST ALWAYS REQUIRES SOME MINOR FITTING. GUNSMITH INSTALLATION IS RECOMMENDED.
These metallic ramps can be used to replace many of the plastic ramps on the market. Attaches with one 6-48 screw.
For the gunsmith or shooting enthusiast. This kit contains our most popular Firesight beads, rear dovetail Firesight, and fibers only for repairs and custom work. Take advantage of the kit price savings.
WGOS Slide/Blade Firesight Combination - Fits all standard Williams adjustable rear guide open sight bases. Both pieces are made of aircraft strength aluminum (NOT PLASTIC). Turn a classic rear sight into Firesights.
Fully adjustable rear metallic Firesights that fit a wide variety of lever action rifles, and semi-auto and bolt action rifles with front ramp.
$18.95
.625 $18.95
$169.95.250.290.312.343.375.406.450
.538 Wide
.570 Wide
$24.95
PRICE
PRICE
PRICE
$18.95
.875 $18.95
$24.95
$18.95
.875 $18.95
$24.95
$18.95
.650 $18.95
$18.95$18.95
59083
70105
70923
ITEM
ITEM
ITEM
59084
70749
60218
59079
70220
60219
59080
70678
5908159082
.375W
.410
3/16”
HEIGHT
HEIGHT
HEIGHT
BARREL DIAMETER
.410W
.445
1/4”
.450W
.485
5/16”
.500W
.634
.538W
.570W
PRICE$18.95$18.95$18.95$18.95$18.95$18.95$18.95
ITEM56432564335643456435564365643756438
HEIGHT250N290N312N343N375N406N450N
PRICE$18.95$18.95$18.95$18.95$18.95
$18.95
$18.95
$18.95
$18.95
$18.95
ITEM5643956440564415644256443
70918
56444
60237
56445
60238
HEIGHT250M290M312M343M375M
500M
406M
538M
450M
570M
(N) .250 NARROW WIDTH IS FOR WILLIAMS STREAMLINED AND SHORTY RAMPS.(M) .340 MEDIUM WIDTH IS FOR FACTORY RAMPS SUCH AS MARLIN, REMINGTON, ETC. (W) .531 WIDE WIDTH IS FOR DOVETAILED BARRELS COMMONLY FOUND ON .22 RIFLES AND MUZZLELOADERS.
2 Firesight Rifle Beads (1 Narrow, 1 Medium)2 Firesight Rifle Beads (1 Narrow, 1 Medium)2 Firesight Rifle Beads (1 Narrow, 1 Medium)2 Firesight Rifle Beads (1 Narrow, 1 Medium)2 Firesight Rifle Beads (1 Narrow, 1 Medium)2 Firesight Rifle Beads (1 Narrow, 1 Medium)2 Firesight Rifle Beads (1 Narrow, 1 Medium)1 Firesight Rifle Bead1 Firesight Rifle Bead2 Rear Dovetail Firesights2 - 6” Fiber Only .040 Diameter (1 Red, 1 Green)2 - 6” Fiber Only .060 Diameter (1 Red, 1 Green)
WMS #70806
WGRS
FP
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
10 11
5D
12 13
KNIGHT/ TRADITIONS
REMINGTON
THOMPSON CENTERCVA
OTHER
$49.95
$29.95
$39.95
$29.95
$39.95
$39.95$39.95
$39.95
$39.95$39.95
$39.95
66369
56530
66653
70267
66711
66654 66655
62260
7021970245
70269
Fits all Knight Rifles (Includes Ramp)
Fits pre 2003 Rifles, Muzzleloaders, All Shotguns
CVA’s w/ Octagon Barrels
Front and rear Firesights replace existing Remington factory rear blade and front bead. (Replaces Rear Blade)
NOTE: INSTALLATION OF DOVETAILED FRONT SIGHTS IN RAMPS AND ESPECIALLY DOVETAILED BARRELS ALMOST ALWAYS REQUIRES SOME MINOR FITTING. GUNSMITH INSTALLATION IS RECOMMENDED.
Fits post 2003 Rifles, Muzzleloaders w/ 1pc Ramp
CVA’s w/ Round Barrels and Dovetail Front Sight
Thompson Center w/ Octagon BarrelsThompson Center New Englander
Traditions, Vortek, Cabela’s Private w/ Round Barrels
Cabela’s Octagon HawkenSavage MLII, Winchester X150
CVA Accura, Optima, Kodiak, and Wolf
SKS APERTURE SIGHTThe WSKS Aperture Sight comes with a special large hole aperture (R 3/8 x .150) for an excellent field of view. Also available as Firesight set.
$25.9544560 SKS Aperture Sight
SKS Aperture Sight
MAUSER 98 FRONT FIRESIGHTMauser 98 Front Firesight for .200 Dovetail.
$18.9570940 Mauser 98 Front Firesight
Mauser 98 Front Firesight
AK47 APERTURE SIGHTSimilar to the Williams WSKS sights, the WAK47 Aperture Sight is designed for AK47’s with the original military type rear sight. Fully adjustable for elevation and windage. No drilling and tapping required.
$25.9547476 AK47 Aperture Sight
AK47 Aperture Sight
Combines the Firesight front bead with Williams fully adjustable metallic rear sight for an incredible sight picture. No gunsmithing required.
$39.95$20.95
6346460214
SKS Rifle Firesight Set
SKS Rifle Firesight Set
SKS Rifle Firesight (Front Only)
SKS FIRESIGHT SET
M-96 APERTURE SIGHTDesigned for economy and easy installation, the WM-96 fits Mauser 96 type military rifles. It installs in place of the military rear sight without drilling and tapping and is compatible with the military front sight. Fully adjustable for windage and elevation. Available in WM-96 Aperture Sight with R 3/8 x .150 Aperture.
$25.9547480 M96 Aperture Sight M96 Aperture Sight
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
12 13
14 15
Internal micrometer adjustments have positive internal locks. The FP is strong, rugged, and dependable. The alloy used to manufacture this sight has a tensile strength of 40,000 psi. Yet, the FP is light and compact, weighing only 1.5 ounces.
*Some FP sights may require stock modification.
NOTE: ADD ‘TK’ TO MODEL NUMBER IF TARGET KNOBS ARE DESIRED. SEE PRICE LIST FOR COMPLETE LISTING OF ALL AVAILABLE MODEL VARIATIONS.
FP RECEIVER SIGHT OPTIONS- OPTIONAL APERTURES -
FP-336
FP-39TMFP-39
For Marlin centerfire lever actions (uses two rear scope mount holes). 1894 Requires hammer extension. WMS #70222
For Marlin 39A lever action. (Mounts in front scope mount hole) WMS #70807
For Marlin 39A lever action. WMS #1254MARLIN
FP-71
FP-94/36
FP-94/375
FP-94SE
For Winchester 71, 86, 05, 07, and 10. Also for Model 95 Winchester lever action and Browning centerfire lever action. WMS #1266
For Winchester Models 94 Top eject, 55, 63, 64, 65, and 9422; Marlin Models 36, 336, 444, 44 Magnum, and 93 and 1895 and 1895G pre 2001; Sears centerfire lever action. WMS #1274For Winchester 94 Big Bore, .375. Also fits 94 Big Bore Angle Eject, but drilling and tapping is necessary. WMS #1278For newer Winchester 94 Angle Eject models (Fits factory drilling and tapping on top of receiver. WMS #20550
WINCHESTER
FP-CZ For CZ-452 rifles (excluding scout - see below). Also fits CZ455 Luz (needs 3/8 shorty ramp and .312N Bead. Must be drilled and tapped. WMS #70883
CZ
FP-Hawken
FP-T/CFP-T/C Encore/OmegaFP-Triumph
For the Pre 1991 Thompson/Center Hawken and Renegade M/L rifles. This sight fitted with sub-block. This sight fitted with sub block. Necessary to drill and tap one hole on models that factory discontinued drilling. WMS #1340 For Thomson/Center Contender Pistol and Carbine. WMS #1376For Thompson/Center Encore, Omega, G2, Prohunter, Endeavor (Fits factory drilling and tapping on top of receiver). Scout requires higher, 570W front sight. WMS #36890
Fits T/C Triumph, Impact WMS #70938
THOMPSON CENTER
FP-H&R Fits Buffalo Classic, Handi rifles. WMS #70273H&R
FP-Legend For Modern Muzzloading Knight Legend, Wolverine, Disc, Rolling Block, Bighorn, American, and T-Bolt (Fits factory drilling and tapping). WMS #54250
KNIGHT
FP-AG
FP-GR
FP-98
For air guns and .22 rifles with dovetail grooved receivers and high line of sights. (No drilling and tapping required). .450 at lowest adjustment. WMS #14168
For air guns and .22 rifles with dovetail grooved receivers and low line of sights. (No drilling and tapping required). .350 at lowest adjustment. WMS #9683
For military Mauser, Husqvarna, Weatherby Mark V, right and left, and BRNO without dovetailed receiver. WMS #1282
OTHER
FP-99SFP-340
For late Savage 99 with top tang safety. Will fit old 99, but will be necessary to drill and tap. WMS #1290For 322-325-340-342 Stevens Savage. WMS #1302
SAVAGE
POSITIVE INTERNAL LOCKS
STANDARD TARGET KNOBS (TK)
CNC MACHINED
MICRO ADJUSTMENTS FOR WINDAGE/ELEVATION
FOOLPROOF DESIGN FOR ALL HUNTING AND TARGET SCENARIOS
FP STANDARD $74.95FP w/ TARGET KNOBS $86.95
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
14 15
16 17
AVAILABLE APERTURES
TWILIGHT SERIESTwilight apertures are designed for shooting under poor light conditions, early morning, late evening, and other inclement conditions. They create a sharp contrast that gives quick definition to the aperture hole, and they eliminate the “fuzz” with which many shooters have trouble.
Williams Twilight apertures will accommodate Redfield, Lyman, etc.
TW-3/8 x .050* .....3/8” O.D. w/ .050 inner holeTW-3/8 x .093* .....3/8” O.D. w/ .093 inner holeTW-3/8 x .125* .....3/8” O.D. w/ .125 inner holeTW-3/8 x .150* .....3/8” O.D. w/ .150 inner holeTW-1/2 x .050 .....1/2” O.D. w/ .050 inner holeTW-1/2 x .093 .....1/2” O.D. w/ .093 inner holeTW-1/2 x .125 .....1/2” O.D. w/ .125 inner hole*Available with long shank for WGRS Receiver Sights
REGULAR SERIESBuckbuster - Standard - TargetWe have always felt that a disc with a small outer diameter and a large inner hole is best for hunting. For this reason, we have made the 3/8” O.D. disc with a .093 inner hole as standard equipment. Other sizes are optional.
R-3/8 x .050* .....3/8” O.D. w/ .050 inner holeR-3/8 x .093* .....3/8” O.D. w/ .093 inner hole (Standard)R-3/8 x .125* .....3/8” O.D. w/ .125 inner hole (Buckbuster)R-3/8 x .150* .....3/8” O.D. w/ .150 inner holeR-1/2 x .050 .....1/2” O.D. w/ .050 inner holeR-1/2 x .093 .....1/2” O.D. w/ .093 inner holeR-1/2 x .125 .....1/2” O.D. w/ .125 inner holeR-1” x .050 .....1” O.D. w/ .050 inner hole (Target)*Available with long shank for WGRS Receiver Sights
TWILIGHT TARGET REGULAR
The Williams Target Globe Front Sight is adaptable to many different rifles for target competition shooting. It comes complete with a selection of inserts. It mounts easily to the attaching base (See below) with a knurled locking screw. Height of the target globe sight .545 center, not including the attaching base.
Available in High or Low sight line models, the TARGET-FP receiver sight with proper attaching base can be adapted to most .22 caliber target rifles as well as many sporter type rifles. See the attaching base selection chart for models currently offered.
TARGET GLOBE FRONT SIGHT(LESS ATTACHING BASE)
TARGET-FP HIGH
TARGET-FP HIGH LEFT HAND
TARGET-FP LOW
TARGET - RUGER AMERICAN .22LR
ATTACHING BASE SELECTIONCHART FOR TARGET-FP $20.95
In most cases the TARGET-FP (high) receiver sight is recommended on target type rifles with globe front sights. Elevation adjustment range up to .5” WMS #1222 $79.95
Same as Target-FP High, but mounts of the right side of gun for left hand shooters. WMS #71121 $79.95
The TARGET-FP (low) is for sporter type rifles and is compatible with standard front sights (some guns may require higher front beads) or the lowest globe type front sights. WMS #1223 $79.95
These target sights are specifically designed to fit Ruger American .22LR rifles with both standard and compact barrel lengths. Both the front and rear sights come complete, ready to install, with no gunsmithing required.
Fits Remington Models 540X, 541-S, 580*, 581*, 582*Fits Remington Models 510*, 511*, 512*, 513-T, 521-TFits Winchester Model 75Fits Savage/Anschutz Model 64* and Mark 12*
ATTACHING BASES FOR TARGET GLOBE FRONT SIGHT $19.95
Height .220
Radius .300Height .300Height .456
Radius .350Height .450Radius .400Height .215
Dovetail (Low)4762047621476224762347624
WMS #47478 $50.95
#5401226122912321235
Dovetail (High)
#510
Screw On
#75
Screw On
#64
Screw On
*Drilling and tapping required.
$86.95$69.95
7107871079
Ruger American .22LR Target FP Rear Sight
Ruger American .22LR Target Globe Front Sight (Includes Attaching Base)
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
16 17
18 19
- Positive Windage and Elevation locks- Lightweight, Strong, Accurate- Williams Quality Throughout- Rustproof
Available for most of the more popular rifles and shoguns - the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision.
5D-SH Benjamin 340, 342, 347 / Sheridan Model C WMS #1418
AIRGUNS $41.955D-AG
5D-GR
Air Guns, .22 Rifles w/ Dovetail& High Line of Sights WMS #70809
Air Guns, .22 Rifles w/ Dovetail& Low Line of Sights WMS #70810
OTHER $41.955D-JEMS
5D-SMLE
Jap, Enfield, Mauser, Springfield 03; Remington 700LH; Daisy 99, 299 WMS #1410
Enfield 1,4,5 WMS #1420
WINCHESTER $41.955D-94/365D-94SE
Winchester 94 Top Eject, 64, 9422 WMS #1398
94 Angle Eject (Excludes Big Bore) WMS #36888
REMINGTON $41.955D-510 Remington 510, 511, 512, 513, 521T
WMS #1400
MARLIN $41.955D-39A5D-815D-336
Marlin 39A Lever Action WMS #1388
Marlin 80,81, A1 WMS #1396
Marlin Centerfire Lever Actions, 1894 WMS #70224
- Compact Low Profile- Lightweight, Strong, Rustproof- Positive Windage and Elevation Locks
WGRS-37 For Ithaca 37 pump shotgun, Browning BPS, and Maverick 88 WMS #1475
ITHACA $39.95
WGRS-44
WGRS-RU22
WGRS-Mini 14/30
WGRS-RU22
For Ruger 44, Similar to the WGRS-RU22, but not interchangeable. Usually requires a higher front sight - .500 to .570M. WMS #1478Fits Ruger 10/22 without drilling or tapping. A higher front sight is normally required usually .570. Also, Winchester 1300 and 1400 Slug Hunter. WMS #1469Fit Ruger Mini-14 Ranch rifle and Mini-Thirty. (Pre 2005) WMS #20590
Set with WGB-570M 1/16” WMS #44565
RUGER $39.95
OPTIONAL ACCESSORIES
WGRS-FN
WGRS-H&R
WGRS-M1 CARWGRS-Savage
WGRS-M/LWGRS-54
Will fit any FN type action with 1/2” hole spacing, including the Mauser FN, S&W, Crown Grade Husqvarna (CGH), and the Browning high power bolt action, and Mark X. WMS #1460For H&R 158, 258 Topper single shot rifles. Also fits other 1/2” radius barrels or receivers and has 1” hole spacing. WMS #17778For the 30M1 Carbine. Fits dovetail. WMS #1463For Savage 11 with round receiver. (Needs 538M bead) WMS #70274
For large octagon barrels. Has flat base.WMS #1466
For any 3/8” grooved receiver. WMS #70154
OTHER $39.95
SETS $49.95
WGRS-70 For all post war Model 70 Winchesters. Will also fit the Model 670 and 770. Also, Browning A-Bolt.WMS #1445
WINCHESTER $39.95
WGRS-EncoreWGRS-Black DiamondWGRS-T/C
For T/C Encore, Omega, Triumph, Prohunter, Endeavor, Impact WMS #63304
For T/C Black Diamond WMS #66708
For T/C Contender pistol, G2 WMS #9671
THOMPSON CENTER $39.95
WGRS-700WGRS-742
WGRS-7400
For Remington 700, 721 and 722. Also for Howa 1500. WMS #1451For Remington 760 and 742. Early models will require a higher front sight. For the BDL’s, use the FP-740AP. WMS #1454For Remington models 4, 7400, 6, and 7600 WMS #1484
REMINGTON $39.95
WGRS-336
GHOST RING FIRESIGHT GHOST RING
OPEN SIGHT BLADES
Set for Marlin 336 with proper firesight, front sight (non drill and tap). WMS #70200
MARLIN $39.95
WGRS-OptimaCVA
RUGER
WGRS-CVAOctagon
WGRS-CVA Round
Set fits Optima, Optima Pro, Kodiak, Kodiak Pro, Wolf. Includes Firesight Front. WMS #70271
For CVA rifles with octagon barrel or receiver design. (Apollo, etc.) Many are factory drilled and tapped. Also fits Traditions Deerhunter. Requires higher front sight. By drilling and tapping, this sight can be used on most 15/16 & 1” octagon barrels. WMS #44737
For CVA rifles with round barrel, Winchester X-150 Muzzleloaders. Guns with plastic front sight will need lower front sights (#70220 .485 Ramp) WMS #70154
CVA $39.95
WGRS-LegendWGRS-DISCWGRS-KN
For Modern Muzzleloading Legend, Vision, Revolution & Wolverine. Fits factory drilling and tapping. WMS #51096
T-Bolt for Knight Disc and T-Bolt WMS #63303
For Modern Muzzleloading Model MK-85 Knight rifle, and Savage M-110 with flat receiver. WMS #31794
KNIGHT $39.95
WGRS-BAR For Browning BAR Auto rifle and BLR lever action. (BAR uses 9/16 ramp .375N bead) WMS #1457
BROWNING $39.95
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
18 19
20 21
- Made from high tensile strength aluminum. Will not rust.- All parts milled - no stampings.- Streamlined and lightweight with tough anodized finish.- Dovetailed windage and elevation - Easy to adjust, positive locks.- Interchangeable blades available in four heights and four styles.
Convert any WGOS sight to the speed and accuracy of a ghost ring now with the light gathering of fiber optics (same height as 1/4 blade).
When using the WGOS Special add .100 to the above heights.
When using the WGOS Flat add .050 to the above heights.
3/16” BLADE .320 - .420
3/16” BLADE .350 - .450
1/4” BLADE .382 - .482
1/4” BLADE .412 - .512
5/16” BLADE .445 - .545
5/16” BLADE .475 - .575
3/8” BLADE .507 - .607
3/8” BLADE .537- .637
WGOS SERIES
WGOS HEIGHT WITH BLADE(EXCEPT OCTAGON)
WGOS OCTAGON T/C AND CVA HEIGHT WITH BLADE
A shortened version of the popular streamlined ramp. It is easily installed. It can be screwed on, or sweated on
Adds .250 to the height of dovetail.
Especially handy on models that require higher than normal front sight (when installing a receiver sight).
Available in two widths - .250 (WMS #13053) for Williams Streamlined ramps or ramps with a 1/4” top width - and the .340 (WMS #13054) on all standard ramps (Winchester, Remington, Savage, etc.) having this base width. Incorporates standard 3/8” dovetail.
The Williams Streamlined Front Sights are available in three widths, and a variety of heights, with industry standard 3/8” dovetail.
The narrow (N) .250 width is for Williams Streamlined and Shorty ramps.
The medium (M) .340 width is for factory ramps such as Marlin, Remington, etc.
The wide (W) .531 width is for dovetailed barrels commonly found on .22 rifles and muzzleloaders.
Note: Installation of dovetailed front sights in ramps and especially dovetailed barrels almost always requires some minor fitting. Gunsmith installation is recommended.
Now available for the two most common 12ga. barrel diameters (.875).
Available in 1/8”, 3/16”, 9/32” and 3/8” heights.
*See price list for part numbers.
Lightweight high strength alloy. Steel screws and locks. Fits standard 3/8” dovetail. Anodized black finish. Rustproof.
The revolutionary design of the WDOS means no more driving or hammering an open sight into the dovetail of the rifle. It simply slides into the dovetail slot in the barrel with finger tip pressure. As you tighten the locking screw it snugs the dovetail on the rifle barrel and locks the sight in place.
Available in four heights with four different styles of blades - the same blades as used in the famous Williams Guide Open Sight - the U, V, SQ, and Britisher type notches.
The WDOS with 3/16” blade is adjustable i n height from .281 to .345. WMS #1593The WDOS with 1/4” blade is adjustable in height from .345 to .406. WMS #1594The WDOS with 5/16” blade is adjustable in height from .406 to .468. WMS #1595The WDOS with 3/8” blade is adjustable in height from .468 to .531. WMS #1596
SHORTY RAMPS $21.95 RISER BLOCKS $8.95
SHOTGUN SHORTYRAMPS $28.95
STREAMLINED FRONT SIGHTS $12.95
WDOS DOVETAIL OPEN SIGHT $21.95
“SQ”FIRESIGHTGHOST RING
“U”
BEAD DIAMETERWGB 1/16” or 3/32” Gold .250NWGB 1/16” or 3/32” Gold .290NWGB 1/16” or 3/32” Gold .312NWGB 1/16” or 3/32” Gold .343NWGB 1/16” or 3/32” Gold .375NWGB 1/16” or 3/32” Gold .406NWGB 1/16” or 3/32” Gold .450N
BEAD DIAMETERWGB 1/16” or 3/32” Gold .250MWGB 1/16” or 3/32” Gold .290MWGB 1/16” or 3/32” Gold .312MWGB 1/16” or 3/32” Gold .343MWGB 1/16” or 3/32” Gold .375MWGB 1/16” or 3/32” Gold .406MWGB 1/16” or 3/32” Gold .450MMODELS FOR WIDE (W) WIDTHSWWGB 1/16” Gold .343WWWGB 1/16” Gold .375WWWGB 1/16” Gold .410WWWGB 1/16” Gold .450WWWGB 1/16” Gold .500WWWGB 1/16” Gold .538WWWGB 1/16” Gold .570WSPECIAL HEIGHTS: .538M, .570M
1/8”3/16”9/32”3/8”
WMS #1711WMS #1712WMS #1713WMS #1714
OPTIONAL ACCESSORIES
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
20 21
22 23
Williams Scope Mount Drill FixtureThe Williams Scope Mount Drill Fixture is designed for drilling almost any receiver between the diameter of .630 to 1.535, round, flat or octagon. With a hole spacing choice of .500, .605 or .860, you can install almost any scope mount base in the industry.
The “scissors” action of the fixture will automatically center itself. The fixture comes complete with one each #31 and #28 hardened steel lock bushings for drilling #31 (6-48) and #28 (8-40) thread sizes. When locked into position, the lock bushings will not spin in the fixture, avoiding scratches around the drilled holes. After #31 holes are drilled, you can use the #28 bushing as a tap guide for 6-48 taps. You will have fewer broken taps and perfectly straight tapped holes.
The Williams Scope Mount Drill Fixture is an excellent addition to any gunsmith’s workbench. New 2010 Model fits SBEII, Rem. 887 - WMS #36898 $149.95
Fronts Sight PusherFor Easy Installation and Adjustment of Front SightsIn the past there was only one accepted way to install a front sight in a ramp – pound it in with a hammer from the side. This marred a beautiful finish and loosened or damaged the ramp.The Front Sight Pusher provides the best way to install a front sight in a ramp. By equalizing the pressure on a ramp and sight, it permits installation without marring and eliminates excessive pressure on the ramp. Sight is smoothly and accurately moved into exact position. WMS #1953 $60.95
Williams Shotgun Bead Drill Fixture
Another excellent tool for gunsmithsThis handy fixture makes installation of front and center shotgun beads
on vent rib barrels quick and easy. It allows drilling for either #45 (3-56) or #31 (6-48) bead thread sizes.
Simply clamp in place and drill. The “scissors” action automatically centers
on the rib. WMS #36899 $74.95
Aluminum Slot BlankHard, black anodized finish. For appearance sake, use this slot blank after removing iron sight. It will also cover up most burr marks. Easy installation with one locking screw. Fits all 3/8” dovetails. WMS #1951 $6.95
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
22 23
STREAMLINED RAMPS
SCREW ON $25.95
SWEAT ON $25.95
The Williams Streamlined Ramps have a 3/8” dovetail and pleasing lines not found in any other ramp. The ramp is beautifully blued. 6-48 screws furnished. Available in heights of 9/16”, 7/16”, 3/8”, 5/16”, 3/16”. Specify “Screw On” or “Sweat On.”
Note: The 3/16” “Screw On” ramp has 1.625” hole spacing. All other “Screw On” ramps have 2” hole spacing. Front sights should be ordered in (N) width.
1/8”1/8”1/8”3/16”1/8”
3/16”3/16”1/8”3/16”1/8”
9/32”9/32”3/16”5/16”
1/8”9/32”3/16”5/16”9/32”
5/16”3/8”3/16”5/16”9/32”
3/8”9/32”
3/8”5/16”7/16”
3/8”5/16”7/16”9/32”
7/16”3/8”5/16”7/16”
3/8”3/8”7/16”9/16”
7/16”9/16”9/16”7/16”
9/16”9/16”9/16”9/16”
.035
.035
.035
.0975
.035
.0975
.0975
.035
.0975
.2225
.191
.191
.0975
.2225
.035
.191
.0975
.2225
.191
.2225
.285
.0975
.2225
.191
.285
.191
.285
.2225
.3475
.285
.2225
.3475
.191
.3475
.285
.2225
.3475
.285
.285
.3475
.4725
.3475
.4725
.4725
.3475
.4725
.4725
.4725
.4725
.250
.290
.312
.250
.343
.290
.312
.375
.343
.406
.250
.290
.375
.250
.450
.312
.406
.290
.343
.312
.250
.450
.343
.375
.290
.406
.312
.375
.250
.343
.406
.290
.450
.312
.375
.450
.343
.406
.450
.375
.250
.406
.290
.312
.450
.343
.375
.406
.450
.285
.325
.347
.3475
.378
.3875
.4095
.410
.4405
.441
.441
.481
.4725
.4725
.485
.503
.5035
.5125
.534
.5345
.535
.5475
.5655
.566
.575
.597
.597
.5975
.5975
.628
.6285
.6375
.641
.6595
.660
.6725
.6905
.691
.735
.7225
.7225
.7535
.7625
.7845
.7975
.8155
.8475
.8785
.9225
RampHeight
FRONT AND REAR HEIGHT RELATIONSHIPS EXPLAINED
RampHeight Base to Dovetail
Height from Base to Dovetail
Height of Williams
Bead
From Top of Barrel to Top of Bead
SIGHT COMBINATION CHART
Step by step procedure for selecting open sights for tapered rifle barrels.
STEP ONE: Measure diameter of barrel at Point “A” where front sight is to be installed. (Example: .660 Dia.). Then divide this diameter in half to determine height from center of bore to top of barrel. (Example: .660/2= .330)
STEP TWO: Measure diameter of barrel at Point “B” where rear sight is to be installed. (Example: .820 Dia.). Then divide this diameter in half to determine height from center of bore to top of barrel. (Example: .820/2= .410).
STEP THREE: Select rear sight to be used and add its height to the height determined in Step Two. (In this case we have selected the WGOS with 3/8” blade rear sight which is .560 high at its center of elevation adjustment). This gives you the total height of the rear open sight from the center of the bore. (Example: .410+.560= .970).
STEP FOUR: You now subtract the height from the center of the bore to the top of the barrel determined in Step One (.330) from the total
height of the rear sight determined in Step Three. (Example: .970 - .330= .640). This tells you that you need a front sight ramp and bead combination approximately .640 high to accommodate the rear sight.
STEP FIVE: Using the Williams Sight Combination Chart you select a ramp and bead coming closest to your height needed as determined in Step Four (.640) which in this case would be the 7/16” ramp with .290N bead giving a height of .6375 as shown on the chart.
By following these procedures, sight combinations can quickly and easily be determined. When selecting ramp and bead combinations from the chart, the height need not be exact as there is ample elevation adjustment in the WGOS open sight to compensate for slight variances.
Point “C” in the above drawing shows the proper line of sight parallel to the center of the bore when the proper combination is used. When ordering sights and you are still in doubt as to the proper combination please include the dimensions of your barrel at points “A” and “B” so we may assist you in the proper selection.
3/16”5/16”3/8”7/16”9/16”
3/16”5/16”3/8”7/16”9/16”
WMS #1695WMS #1696WMS #1697WMS #1698WMS #1699
WMS #1690WMS #1691WMS #1692WMS #1693WMS #1694
WILLIAMS STREAMLINED RAMP HOODSStandard: WMS #1710 $7.95Vented: WMS #70031 $10.50
24 25
SM w/ REGULAR RINGS
SM-94/375 ON 94 BIG BORE
SM-71 SIDE MOUNT ON 94
SM-94/36 ON 94
SM w/ HCO RINGS
SM-70 FITS:Winchester 54, 70, 670, 770Remington 600, 660, 700, 721, 722, SevenMossberg 800, 3000Weatherby MK-V, VanguardHusqvarna Crown GradeInterarms Mark X, Howa 1500/1700Savage 110, 111BSA Majestic, Monarch, CF-2U.S. Military 1903/1903-A3, 1917 Enfield*Mausers 91, 93, 94, 95, 96, 98*British SMLE #1, (Round Receiver)**Japanese M38 (6.5), M99 (7.7)Swiss 1911 (7.5)*Request Shim Pack with mount**Requires Mounting Plate
SM-71 FITS:Winchester 71, 86, 92, 94*, 95Remington 14, 141Marlin 36, 336, 93, 444, 1895Russian 1891 (7.62)British SMLE #4 & 5 (Flat Receiver)*Use SM-71 on Model 94 when usingFP or 5D receiver sight. Request proper 94 screws with mount.
SM-94 FITS:Winchester 94*, 94AE*Marlin 336*, 30AS*, 444*, 1895**Use SM-71 when using FP or 5D receiver sight.
SM-340 FITS:Savage 322, 325, 340*, 840*Most 340’s are factory drilled and tapped.
The Williams QC Side Mount permits the shooter to have both scope and iron sight always available for instant use. From the same base, shooter has his choice of high rings that place scope directly over the bore or in the offset position. $49.95Williams Side Mounts have positive locks. Using these locks, the mount becomes a “one piece” mount. Used optionally, the mount is quickly detached. The eccentric bushing in the base of the Williams QC Mount provides a limited amount of windage adjustment to insure a good mounting job.
Mounting Plates:
Mounting Plate for 30-41 Carbine:(Attach with 8-40 fillister screws). Use the Williams SM-740 side mount base with this mounting plate. Scope can be offset or high overbore.
Mounting Plate for SMLE No. 1:(Attach with 8-40 fillister head mounting screws). This Mounting plate is supplied with long 8-40 fillister head screws to replace SM-70 short screws. Use the SM-70 base. Mount can be installed offset or central overbore.
The QC side mount requires no drilling or tapping for the Model 94 (top eject type) Winchesters. Drilling & tapping is required on the new Side Eject Model 94 Winchesters. On the Model 336 Marlins, drill and tap just one hole.
*SEE NEXT PAGE FOR RING SELECTION.
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
24 25
HCOCentral Overbore RingSize 1”(For Side Bases Only)A variation of the HCO that we occasionally run into is where a shooter wants to make use of his right shoulder and his left eye in which case the HCO rings can be reversed 180 degrees, not only positioning the scope high, but offset to the left.
SPECIAL HIGH RINGSSize 1”These rings have a special long threaded stud in the base, and a subring base of approximately .200 thick to accommodate the large scopes that heretofore could not be mounted low central overbore or on rifles having an especially heavy barrel. (Also available in HCO Style)
QC SIDE MOUNT - OFFSET - OR OVERBOREFrom the same base, your choice of having scope in the offset or the central overbore position. In either case, you have simultaneous use of scope and iron or receiver sight. These sighting combinations are becoming more popular every day.
NOTE:Limited quantities of our old style solid 7/8” and 3/4” rings are available. Also, a limited amount of our split and HCO rings in 26mm diameter are available. Prices upon request.
CAM-LOCK THUMB NUT BUSHINGThe cam-lock thumb nut bushing pulls the threaded stud down to a positive lock, locking it exactly the same each time, and assuring the return to absolute zero.
SPLIT*Split Ring Size 1”
WILLIAMS ECCENTRIC BUSHINGAll Williams QC Mounts have an eccentric bushing with a collar that can be turned with a screwdriver or similar object, to obtain preliminary adjustment and ensure a good mounting job. It is not necessary to remove bushing to turn it, and it is not necessary to remove mount to obtain windage adjustment.
EXTENSIONExtension RingSize 1” (Unless otherwise indicated, only one extension furnished in set)*Split sleeves to reduce 1” ring size to 7/8” and accommodate 7/8” scope tube. (Because of the many ring combinations available, mount and rings are packaged separately)
26 27
SHOP OUR HUGE INVENTORY OF WILLIAMS GUN SIGHTS
KEEP UP WITH ALL OF THE LATEST PRODUCT RELEASES
REQUEST THE LATEST PRODUCT CATALOG
RECEIVE TECHNICAL SUPPORT AT :SUPPORT@WILLIAMSGUNSIGHT.COM
7389 Lapeer Rd, Davison, MI 48423 - (800) 530-9028 - Fax: (810) 658-2140
26 27
Nos. 1 & 2 No. 3 No. 4 Front Front Rear
GOLD OR SILVER SHOTGUN SIGHTS:
Bead Shank Model Thread Dia. Length No .1 . 6-48 .175 1/8” No. 2 . 3-56 .175 1/8” No. 3 . 3-56 .130 1/8” No. 4 . 3-56 .067 3/32”
No. 45 .......High Speed Drill Only (For 3-56) WMS #1760
No. 31 .......High Speed Drill Only (For 6-48) WMS #1761
No. 28 .......High Speed Drill Only (For 8-40) WMS #1762
No. 21 .......High Speed Drill Only (For 10-32) WMS #1763
GUN SCREWS:STANDARD IN THE GUN INDUSTRY(100 PER PACKAGE)
6-48 FILLISTER HEAD SCREWSLength .250, Head Thickness .065, Head Diameter .198Length .350, Head Thickness .100, Head Diameter .198Length .425, Head Thickness .100, Head Diameter .198Length .475, Head Thickness .100, Head Diameter .198Assortment of the Above
6-48 PLUG SCREWSLength .090
6-48 HEADLESS SET SCREWSLengths: .275, .400, .575Assortment of the above
8-40 FILLISTER HEAD SCREWSLength .290, Head Thickness .100, Head Diameter .247Length .350, Head Thickness .100, Head Diameter .247Length .475, Head Thickness .100, Head Diameter .247Assortment of the Above
8-40 OVAL HEAD COUNTERSUNKLength .335, Head Diameter .250
8-40 PLUG SCREWSLength .125
10-32 PLUG SCREWSLength .125
10-32 FILLISTER HEAD SCREWSLength .400, Head Thickness .125, Head Diameter .3075
TAPS
CARBON3-56 Carbon Tap Only WMS #17576-48 Carbon Tap Only WMS #17588-40 Carbon Tap Only WMS #1759
HIGH SPEED6-48 High Speed Tap Only #17648-40 High Speed Tap Only #176510-32 High Speed Tap Only #1766
SETS6-48 High Speed Tap and No. 31 High Speed Drill Set #17678-40 High Speed Tap and No. 28 High Speed Drill Set #176810-32 High Speed Tap and No. 21 High Speed Drill Set #1769
NO. 1 Firing Pin: #1968 Fits Stevens 94B, 94C, 107C, 94B1, 107B1, and other Savage-Stevens single barrels made on contract in recent years. #1968
No. 2 Firing Pin: #1969 Fits obsolete Stevens single barrels.
No. 3 Firing Pin: #1970 Fits Iver Johnson Champion and matted rib single made for Montgomery Ward under Western Field brand.
No. 4 Firing Pin: #1970 Fits double barreled Fo1 Model B, Stevens Model 515 stamped 5000 on frame,
315 no number on frame, 530-530A-311-311A-3111 stamped 5100, 311A, or 530A on frame, or doubles made for other firms by Savage or Stevens.
No. 5 Firing Pin: #1972 Fits Harrington and Richardson Model 48, all past and present models and any singles made by H&R for Sears-Roebuck, Montgomery Ward, etc.
— Order by Number –
Rebound Springs, No Charge WMS #11542
12 only ................2-56 Windage Screws12 only ........................6-48 x .350 F.H.12 only ........................6-48 x .285 F.H.12 only ...................... 8-40 x .335 O.H.12 only ........................ 6-48 x .170 F.H.12 only ........................6-48 x .260 T.H.6 only ..........................8-40 x .290 F.H.
6 only ..........................8-40 x .475 F.H.12 only ....... 8-40 x .125 H.L. plug screw12 only .......6-48 x .090 H.L. plug screw12 only ..........6-48 x .187 H.L. set screw1 only ......................6-48 Drill & Tap set1 only ......................8-40 Drill & Tap set
Firing Pin KitThis kit takes care of
95% of all single and double barrel firing pin replacements. Contains
25 numbered firing pins of different styles.
WMS #1967
Store, Smith and Gun Crank Service KitSelected for greatest demand. 6-48, 8-40 and 10-32 screws and taps have long since become the main general repair standbys. Any part of assortment is available. Additional plastic cases also available. WMS #1817
top related