2012 Arlen Ness for H-D® Catalog
Post on 26-Mar-2016
263 Views
Preview:
DESCRIPTION
Transcript
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< H
OT
LEG
S, F
LT |
FRA
MES
& S
USP
ENSI
ON
> |
3
4
> Exciting new applications for 2012> Now available in standard dual disc, Custom single disc, and Custom Twin Caliper on left side leg for dual disc braking power while maintaining a clean single disc look!> Custom single disc kits eliminate the right side caliper for a cleaner look, allowing the rider to better show off custom wheels> Twin Caliper fork leg kits allow you to bring your right side caliper over to the front of your left side leg to still obtain dual disc braking power. This cleans up the right side of your fork assembly to allowing you to show off your custom wheel!> Tapered billet machined design with hidden axle drastically cleans up front end of FLT> Offered in Smooth and Deep Cut styles with either show chrome or black anodize � nish > Combine with Ness fork boots for the complete look> Available for 2000-2012 FLT
HOT LEGS FOR BAGGER MODELS
06-527 2000-2007 FLT Single Disc
DEEP CUT, BLACK
DEEP CUT, CHROME
SMOOTH, BLACK
SMOOTH, CHROME
06-512 2000-2007 FLT Dual Disc
06-504 2000-2007 FLT Dual Disc
06-503 2000-2007 FLT Dual Disc
06-5352000-2007 FLT Single Disc, Dual Caliper
06-5252008-2012 FLT Single Disc
06-5102008-2012 FLT Dual Disc
06-5022008-2012 FLT Dual Disc
06-5002008-2012 FLT Dual Disc
06-5332008-2012 FLT Single Disc, Dual Caliper
06-5132000-2007 FLT Dual Disc
06-5342000-2007 FLT Single Disc, Dual Caliper
06-5312000-2007 FLT Single Disc, Dual Caliper
06-5302000-2007 FLT Single Disc, Dual Caliper
06-5262000-2007 FLT Single Disc
06-5232000-2007 FLT Single Disc
06-5222000-2007 FLT Single Disc
06-5112008-2012 FLT Dual Disc
06-5322008-2012 FLT Single Disc, Dual Caliper
06-5292008-2012 FLT Single Disc, Dual Caliper
06-5282008-2012 FLT Single Disc, Dual Caliper
06-5242008-2012 FLT Single Disc
06-5212008-2012 FLT Single Disc
06-5202008-2012 FLT Single Disc
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
Deep Cut Single Disc / Dual Caliper, black < 06-533 >
Smooth, chrome< 06-500 >
Smooth, black< 06-502 >
Deep Cut, chrome< 06-525 >
Deep Cut, black< 06-511 >
Deep Cut, chrome< 06-525 >
Deep Cut, black
Smooth, blackSmooth, black< 06-502 >
Smooth, chromeSmooth, chrome< 06-500 >
< H
OT LEG
S, FLT | FRAM
ES & SU
SPENSIO
N > |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> New for 2012. Our popular fork legs are now available for Softail™ models > Tapered billet machined design with hidden axle drastically cleans up the front end of your Softail > Offered in Smooth and Deep Cut styles with either show chrome or black anodize � nish > Softail fork boots are also available
HOT LEG FORK LEGS FOR SOFTAIL™ MODELS
06-557 2000-2006 FLST, Single Disc
DEEP CUT, BLACK
DEEP CUT, CHROME
SMOOTH, BLACK
SMOOTH, CHROME
06-566 2000-2006 FXST Single Disc
06-565 2000-2006 FXST Single Disc
06-564 2000-2006 FXST Single Disc
06-5532007-2012 FLST, Single Disc
06-5622007-2012 FXST Single Disc
06-5612007-2012 FXST Single Disc
06-5602007-2012 FXST Single Disc
06-5672000-2006 FXST Single Disc
06-5562000-2006 FLST, Single Disc
06-5552000-2006 FLST, Single Disc
06-5542000-2006 FLST, Single Disc
06-5632007-2012 FXST Single Disc
06-5522007-2012 FLST, Single Disc
06-5512007-2012 FLST, Single Disc
06-5502007-2012 FLST, Single Disc
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
$599.95
5Smooth, chrome
< 06-554 >Smooth, black < 06-555 >
Deep Cut, chrome< 06-556 >
Deep Cut, black< 06-557 >
< H
OT
LEG
S, F
XST
& F
LST | F
RAM
ES &
SU
SPEN
SIO
N >
|
Smooth, black installed < 06-565 > > Dust Seal for FXST close-up
Deep Cut, black< 06-557 >
Deep Cut, chrome< 06-556 >
Deep Cut, black
Smooth, black < 06-555 >
Smooth, chrome< 06-554 >
HOT LEG FORK LEGS FOR SOFTAIL™ MODELS
> Available in Retro or Deep Cut styles > Radically changes the look of your front end > Replaces the OEM lower fork leg covers> Machined from forged 6061-T6 billet aluminum> Retro available in chrome, black anodize, & black anodized with diamond cut edges> Deep Cut available in chrome or black anodized � nish> Sold in pairs
ARLEN NESS FORK BOOTS FOR BAGGERS
20-000Retro Chrome, 1986 - up FLT/FLHR
20-006Retro Black Diamond Cut, 1986-up FLT/FLHR
20-002Retro Chrome,1986 - up FLHT/2006 - UP FLHX Models
20-008Retro Black Diamond Cut, 1986 - up FLHT / 2006-UP FLHX Models
20-001Retro Black, 1986 - up FLT/FLHR
20-012Deep Cut Chrome, FLT, FLHR, 1986 - up FLHT/2006 - UP FLHX Models
20-004Retro Black, 1986 - up FLHT/2006-UP FLHX Models
20-014Deep Cut Black, FLT, FLHR 1986 - up FLHT/2006 - UP FLHX Models
Deep Cut black < 20-014 >
$229.95
$299.95
$229.95
$299.95
$229.95
$299.95
$229.95
$299.95
6
> Retro, chrome > Retro, black diamond cut > Retro, black
> Deep Cut, black> Deep Cut, chrome
< FO
RK BOO
TS, FLT | FRAM
ES & SU
SPENSIO
N > |
> Dust Seal for FXST close-up
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> New for 2012> Available in Retro or Deep Cut styles > Radically changes the look of your front end > Machined from forged 6061-T6 billet aluminum> Retro available in chrome, black anodize, and black anodized with diamond cut edges > Deep Cut available in chrome or black anodize finish > Sold in pairs
ARLEN NESS FORK BOOTS FOR SOFTAIL™
20-020Retro Chrome, 1986 - up FLSTF, FLSTN (except 2007)
20-024Deep Cut Black, 1986-up up FLSTF, FLSTN (except 2007)
20-021Retro Black,1986 - up FLSTF, FLSTN (except 2007)
20-022Retro Diamond Cut, 1986 - up FLSTF, FLSTN (except 2007)
20-023Deep Cut Chrome, 1986 - up FLSTF, FLSTN (except 2007)
> Retro, chrome > Retro, black diamond cut > Retro, black
> Deep Cut, black> Deep Cut, chrome
$229.95
$259.95
$229.95
$299.95
$259.95
Retro, Black < 20-021 >
7
< FO
RK B
OO
TS, S
OFT
AIL | F
RAM
ES &
SU
SPEN
SIO
N >
|
> These 11 degree “Kicked Out” triple trees offer excellent handling when using a 21” or 23” wheels on 1997 and newer Bagger Models.> Adds 8 degrees of rake to your bike, stretches the front of your bike by approximately 5”> Does not require modification to your factory frame> Fairings maintain stock position and do not require angled headlight wedges or special brackets to properly adjust your headlight > Designed exclusively for 21” and 23” wheels only (will not work with any other diameter wheel)> Kit includes black anodized billet aluminum triple trees, steering stem, fork tube extension, fork stops, travel limiters and miscellaneous hardware> Triple tree kit fits all 1997-up FLT Touring models (except Road King models)
NESS “KO” RAKED TRIPLE TREES FOR BAGGERS
20-3751997-2012 FLT models
20-376Trim kit for FLHX, FLHT
ARLEN NESS FORK BOOTS FOR SOFTAIL™
NOTE: FLHX, FLHT models require a new trim kit available separately < 20-376 >
$899.95
$169.95
Retro, Black < 20-021 >
8
> These 11 degree “Kicked Out” triple trees offer excellent handling when using a 21” or 23” wheels on 1997 and
> Adds 8 degrees of rake to your bike, stretches the front of
> Fairings maintain stock position and do not require angled headlight wedges or special brackets to properly adjust your
> Designed exclusively for 21” and 23” wheels only (will not
> Kit includes black anodized billet aluminum triple trees, steering stem, fork tube extension, fork stops, travel limiters and
> Triple tree kit fits all 1997-up FLT Touring models (except Road
NESS “KO” RAKED TRIPLE TREES FOR BAGGERS
FLHX, FLHT models require a new trim kit available
$899.95
$169.95
8
< RA
KED TRIPLE TREES | FRA
MES &
SUSPEN
SION
> |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
NOTE: Street Glide™ and Road King™ models require an ad-ditional headlight trim ring for proper headlight alignment.
> Available for 1988-2007 FXSTS and FLSTS models> Converts factory springer to accept custom handlebars with
3-1/2" centers, (most handlebars and risers)> CNC machined from 6061-T6 billet aluminum> Chrome plated
CUSTOM TOP TREE FOR SPRINGER
20-7781988-2007 FXSTS models
20-7791988-2007 FLSTS models
> These trees will increase your front end rake to 38 degrees with proper handling characteristics> Designed for 23” or 26” wheel applications only! Does not work with any other wheel diameter!> This kit does not require modifying your factory frame.> Increases the front of your bike approximately 5” for a great look> Complete triple tree kit includes everything you need for bolt-on installation for all FLT Touring models 1997-2012> Made in the USA
KEWL METAL 12º RAKED TRIPLE TREES FOR BAGGERS
20-39012º Raked triple tree kit for Bagger models
20-392Headlight ring for FLHX & FLHR, RAW � nish
$179.95
$179.95
$1,049.95
$199.95
9
< TR
IPLE
TRE
ES |
FRA
MES
& S
USP
ENSI
ON
> |
2002-2011 FLT Models< 17-110 >
2002-2011 FLT Models1989-99 Softail™ Models < 17-101 >
2000-2011 Softail™ Models < 17-100 >
> A must when lowering your motorcycle> Chrome plated forged steel> Kickstands are 1” shorter than stock
> The ultimate in kickstand kits for your lowered application> Features internal spring loaded ball bearing lock for a clean look and optimum functionality> Chrome kickstands add that extra touch of styling to an often overlooked piece of your motorcycle> The telescopic chrome plated kickstands are adjustable in height by 1 inch> Mounting brackets are machined from polished stainless steel to eliminate chrome wear in high contact areas> All of these kits feature a hidden ball bearing design return spring for positive stock feel while retaining a clean look
NESS LOWERED KICKSTANDS
NESS HIDDEN SPRING KICKSTANDS
11-0161984-2006 Softail™ models
11-0301984-1999 Softail™, 4-Spd B/T, front mount
11-0212007-2012 Softail™ models
11-0321984-1999 Softail™, rear mount
11-0231990-2012 Dyna™ models
11-031*2000-2012 Softail™, rear mount
11-0222007-2012 FLT models
NOTE: Custom mounting required.
2007-2012 Softail™ < 11-021 > 1984-1999 Softail™ < 11-016 >1984-1999 Softail™ < 11-016 >
1984-1999 FXST Rear < 11-032 >
1984-1999 FXST Front < 11-030 >
1984-1999 FXST Front 2000-2012 FXST Rear< 11-031 >
CUSTOM TOP TREE FOR SPRINGER
KEWL METAL 12º RAKED TRIPLE TREES FOR BAGGERS
> Drop the rear end of your bike for a sleek, low pro� le > Visible kits � nished in black or polished to match factory swingarm > Kits available in adjustable or standard drop > Adjustable kits lower from 1”- 2” > Standard drop kits lower bikes approximately 1” > Supplied with mounting hardware or designed to use factory hardware
NESS REAR LOWERING KITS
17-1002000-2012 Softail™, except 05-12 FLSTN, 05 FXSTD & FXCW
17-1011989-1999 Softail™ models
17-1102002-2012 FLT models (except models w/ soft bags)
NOTE: With all lowering kits, check all clearances prior to riding your motorcycle.
ADJUSTABLE DROP
STANDARD DROP
< KIC
KSTAND
S & LO
WERIN
G KITS | FRA
MES &
SUSPEN
SION
> |
$79.95
$199.95
$79.95
$199.95
$79.95
$199.95
$79.95
$69.95
$104.95
$169.95
10
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Ness design simpli� es lowering the front end of your bike> Specially designed fork dampers are shortened and drilled in a strategic position to obtain factory ride quality> Utilize factory fork springs> Each kit includes 2 complete damper assemblies> Will not � t Springer™, Deuce™, 06-up FXD, or FXCW models
> Everything you need to lower the front and rear of most late model Harley-Davidson®
> Specially designed fork dampers lower the front end without replacing factory springs
> Both kits for Softail™ lower the front of FXST models by 2-1/2” and FLST models by 2” while the rear designs are adjustable to lower as much as desired
> Each kit includes 2 specially designed dampers, 2 adjustable rear shock adjusters, and a 1” shorter kickstand (fork oil not included)
NOTE: Please check all clearances including front fender clearance with suspension travel bottomed out prior to riding your motorcycle.
NOTE: Always check ground clearance and tire to fender clearance when installing these kits.
NESS FRONT LOWERING KITS
NESS COMPLETE LOWERING KITS
28-0011984-1999 41mm FXST (2-1/2” Lower)1986-1999 41mm FLST (2-1/2” Lower)
17-0312007-2012 FLT, except models w/ soft bags
28-0022000-2012 41mm FXST (2” Lower)2000-2012 41mm FLST (2” Lower)1997-2012 41mm FLT except 02-06 FLT/FLHT (1-1/2” Lower)
17-0261989-1999 Softail™, except Springer™ & Deuce™
28-0031990-2005 39mm FXDL (2-3/4” Lower)1994-2005 39mm FXDS (2-3/4” Lower)1994-2005 39mm FXD (2” Lower)1997-2011 39mm XL (2” Lower)
17-0252000-2006 Softail™, except Springer™ & Deuce™
17-0322007-2012 Softail™, except Springer™, Deuce™ & Rocker™
1989-1999 Softail™ Models < 17-026 > 2000-2012 Softail™ Models < 17-025 > 2000-2012 Softail™ Models < 17-025 >
2007-2012 FLT Models < 17-031 >
2007-2012 Softail™ Models < 17-032 >2007-2012 Softail
< 28-002 >
< 28-001 >
< 28-003 >
$49.95
$49.95
$49.95
$249.95
$199.95
$179.95
$249.95
11
< LO
WER
ING
KIT
S | F
RAM
ES &
SU
SPEN
SIO
N >
|
Bringing back what we started over 35 years ago! This sleek signature design started the Digger trend and is a great frame for any custom project. Constructed of 7/8” DOM steel tubing with rugged .188” wall thickness for optimum strength and durability. The frames top bar is 1-1/2” tubing with .188” wall thickness for easy wire routing.
> Designed to accept 23” wheels front and rear > Accepts EVO style Big-Twin engines up to 124”> Accepts EVO style Softail® style transmissions > Rear axle included > Under the frame bolt-on oil tank > Battery box/Electrical box that also serves as coil and key switch mount > Available in 2” stretch with 38 degree rake or 5” stretch “Lowliner” style with a 1” drop in the neck with 38 degree rake
NESS DIGGER FRAME KIT
06-7205” stretch, 38° rake, 1” drop in neck06-7222” stretch, 38° rake
NESS FRONT LOWERING KITS
NESS COMPLETE LOWERING KITS
1989-1999 Softail™ Models < 17-026 >
$2,899.95
$2,899.95
Bringing back what we started over 35 years ago! This sleek signature design started the Digger trend and is a great frame for any custom project. Constructed of 7/8” DOM steel tubing with rugged .188” wall thickness for optimum strength and durability. The frames top bar is 1-1/2” tubing with .188” wall thickness for easy wire routing.
> Designed to accept 23” wheels front and rear > Accepts EVO style Big-Twin engines up to 124”> Accepts EVO style Softail® style transmissions > Rear axle included > Under the frame bolt-on oil tank > Battery box/Electrical box that also serves as coil and key switch mount > Available in 2” stretch with 38 degree rake or 5” stretch “Lowliner” style with a 1” drop in the neck with 38 degree rake
NESS DIGGER FRAME KIT
06-7205” stretch, 38° rake, 1” drop in neck06-7222” stretch, 38° rake
CORY NESS “Purple Digger” < 06-720 >
12
< FRA
ME KITS | FRA
MES &
SUSPEN
SION
> |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Down-N-Out Fender kits are a direct replacement for 1998-2008 and 2009-up FLT Bagger models. These new super stretched fenders are designed to work and �ow with our new Down-N-Out Saddlebags. The fender is constructed from high quality composite materials and oven cured over a wide heat range to insure stabil-ity. It is primed with a high quality polyester sanding primer and is ready to paint. Each fender is put through a 14-point quality control process.
> Each kit includes a billet Ness/RWD LED license/taillight assembly with turn signals that mounts in the recessed area of the fender. Also includes exhaust extensions and chrome heat shields.> Hidden steel fender support brackets and �exible hidden antenna are also included for extra clean installation.> Available with dual or single exhaust cut-outs. > Available in primed ready to paint �nish.
DOWN - N - OUT STRETCHED FENDER
06-4811997-2008 FLT, single exhaust
06-4801997-2008 FLT, dual exhaust
06-4861997-2008 FLT, dual exhaust w/o license plate pocket/assembly
06-4832009-2012 FLT, single exhaust
06-4822009-2012 FLT, dual exhaust
06-4872009-2012 FLT, dual exhaust w/o license plate pocket/assembly
NOTE: please check �t and �nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.
$1,499.95
$1,499.95
$899.95
$899.95
$699.95
$699.95
$899.95
$899.95
We set the standard for extended bags back in the early 90’s, and we �gured it was time to raise the bar again. The Down-N-Out bags from Arlen Ness are 6” longer and 2” lower than our original Big Bags. They feature a patent pending taper on the lower section of the bag for a clean new look and an extra 2 inches of ground clearance.
These bags are constructed from high quality composite materials and are oven cured over a wide heat range to ensure stabilty and durabilty. Each bag has hand placed �bers strategically located to provide the highest structural integrity possible and a maximum strength to weight ratio. No shiny gel coat �nish to sand and prime, every part comes �nished, primed with a super high quality polyester sanding primer and is ready to paint. As always each bag is �t and lid tested and passes a 14-point quality control pro-cess. These bags are strong, long, light, and perfectly balanced.
Down-N-Out Bags are sold in pairs, they are designed to �t fac-tory lids and hardware. The bags are available in a primed ready to paint �nish. Sold in pairs for 1993-up FLT applications, lids and mounting hardware not included.
DOWN - N - OUT STRETCHED SADDLEBAGS
06-978Dual exhaust stretched bag kit
06-979Single exhaust stretched bag kit
NOTE: please check �t and �nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.
15
16
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
$1,299.95
$1,399.95
$1,499.95
Big Bags are longer than stock for a better look and increased storage. They are produced using a state of the art computer controlled injection process. This sophisticated process produces a smooth and � nished product on both inner and outer surfaces. We carefully control temperature, vacuum, � ber placement and pressure during the manufacturing process to produce a void free super strong structure. Every saddlebag goes through a 13 hour post cure cycle in our computer controlled ovens, slowly bringing them from 70° to over 200°. This ensures maximum strength and temperature stability over a wide range. Our bags are jig drilled and lid tested to ensure proper � t and function to your factory lids. Big Bags are available in a ready-to-paint primer � nish. Sold in pairs for 1993-up FLT applications. Lids and mounting hardware are not included.
ARLEN NESS BIG BAG SADDLEBAG KIT
06-981Big Bag kit for dual exhaust
06-986Big Bag kit for single exhaust
06-988Big Bag kit for NO exhaust
NOTE: please check � t and � nish of bags prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.
17
DUCK-TAIL Fender Kit for Stock Bags
> Bagger and Duck-Tail fender kits from Arlen Ness are a direct replacement for the factory fender on 1997-up FLT Bagger models> Pre-drilled composite fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags> Fenders can be used with either a stock width rear tire or up to a 200mm tire> Supplied with a Ness/RWD LED license/taillight assembly with turn signals that mount in the recessed area of the fenders. Light assembly plugs into the factory harness for simple installation> Hidden steel fender support brackets and flexible hidden antenna are included for a clean installation> We recommend using the Bagger fender kit with either our saddlebag extensions or Arlen’s Big Bags and using the Duck-Tail fender kit with stock saddlebags> Bagger-Tail fender design is available with cut-outs for dual exhaust, single exhaust or no exhaust cut-outs. Be sure to check your application > Available in a primed, ready to paint finish
BAGGER & DUCK-TAIL REAR FENDER KITS FOR FLT
06-4951997-2008 FLT, NO exhaust
06-4982009-2012 FLT, single exhaust
06-4792009-2012 FLT, dual exhaust, w/o license plate pocket/assembly
06-4992009-2012 FLT, NO exhaust
06-4901997-2008 FLT, dual exhaust
06-4911997-2008 FLT
06-4941997-2008 FLT, single exhaust
06-4781997-2008 FLT, dual exhaust, w/o license plate pocket/assembly
06-4922009-2012 FLT, dual exhaust
06-4932009-2012 FLT
NOTE: Does not fit with tour packs or quick detach backrests. End user can modify fender or fabricate custom brackets to accept tour pack brackets or quick detach backrests if necessary. Please check � t and � nish prior to painting. Arlen Ness will not be responsible for any damage sustained to paint jobs.
BAGGER-TAIL
DUCK-TAIL
Bagger-Tail NO-exhaust < 06-499 > Duck-Tail < 06-493 >
Bagger-Tail Single exhaust < 06-498 >
Bagger-Tail Dual exhaust, < 06-492 > replacement for the factory fender on 1997-up FLT Bagger models
> Fenders can be used with either a stock width rear tire or up to
> Supplied with a Ness/RWD LED license/taillight assembly with turn signals that mount in the recessed area of the fenders.
> We recommend using the Bagger fender kit with either our saddlebag extensions or Arlen’s Big Bags and using the
> Bagger-Tail fender design is available with cut-outs for dual exhaust, single exhaust or no exhaust cut-outs. Be sure to
$899.95
$899.95
$849.95
$849.95
$599.95
$799.95
$799.95
$599.95
$799.95
$799.95
18
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
$339.95
$669.95
$249.95
$339.95
> An economical way to achieve the stretched bag look> Saddlebag extensions can be bolted on (drilling required) or
bonded to your factory saddlebags> Constructed of � berglass, ready to be painted> Kit includes: two saddlebag extensions and all necessary
mounting hardware> Looks great with our Bagger Rear Fender Cover
> Developed to � t directly over existing rear fenders on FLT and Road King™ models 1997-2008 with slight modi� cations> Fender cover designed to clean up ugly gap between fender
and factory saddlebags> Saddlebag extensions can be bolted on for custom applications.> Constructed of � berglass> Kit includes fender cover, two saddlebag extensions and all necessary mounting hardware> Components also available separately
> Direct replacement saddlebag lid latch kit > Economically priced compared to expensive OEM latch kit > Comes with all necessary hardware and hinges, except saddlebag lock > Great for aftermarket custom saddlebags
NESS SADDLEBAG EXTENSIONS
NESS REAR FENDER COVER FOR BAGGER
NESS SADDLEBAG LATCH KIT
06-396Saddlebag extensions for Bagger models
06-697Bagger fender cover & bag extension kit
03-525Saddlebag latch kit
06-497Ness Bagger fender cover ONLY
19|
FLT Side Cover w/o Crash Bar, < 03-624 >
FLT Side Cover w/o Crash Bar, < 03-614 >
> Arlen’s design nicely blends into your factory saddle bags or Ness Big Bags for a clean custom look. Covers are also longer than stock to add additional styling and surface area for your paint scheme> Covers are designed to � t directly over the factory units by drilling 3 small holes in unseen areas of the factory side cover > Covers are available in gloss black coated ABS � nish to eliminate a trip to your painter unless custom paint is desired.> Available for 1997-2012 FLT models> Made in the U.S.A. and sold in pairs
NESS FLT SIDE COVERS FOR 1997-UP MODELS
03-6231997-2008 FLT, Gloss Black, w/ Crash Bars
03-6242009-2012 FLT, Gloss Black, w/ Crash Bars
03-6131997-2008 FLT, Gloss Black, w/o Crash Bars
03-6142009-2012 FLT, Gloss Black, w/o Crash Bars
$79.95
$199.95
$199.95
$199.95
$199.95
> These neck covers hide the ugly welds found on the neck of a stock frame> Constructed from ABS plastic> Available in paintable black � nish> Fits 1993-2007 FLT Frames> Sold in pairs
NESS SADDLEBAG EXTENSIONS
NESS REAR FENDER COVER FOR BAGGER
NESS SADDLEBAG LATCH KIT
NECK COVER KIT FOR FLT
03-611Paintable � nish neck cover set
NESS FLT SIDE COVERS FOR 1997-UP MODELS
20
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
21
|
$399.95
$399.95
$325.95
$599.95
Our new tank extension gives you the look of a sleek custom tank at the fraction of the cost. No cutting, grinding, welding, or buying an expensive aftermarket tank. Just bolt it right on to your stock Road Glide or Street Glide tank. Constructed from high quality composite materials that are oven cured over a wide heat range to ensure stabilty. Each extension piece has hand placed fibers stra-tegically located to provide the highest structural integrity possible. Each piece is primed and ready to paint.
> Designed to � t 09-up & 07-earlier Street Glide™ and Road Glide™ models (FLHX, FLHT, FLT, FLTR). Will not � t RoadKing™ models (FLHR)> Compliment your tank’s new style with an Arlen Ness custom gas cap, pg. 112
NESS WINGED TANK EXTENSION FOR BAGGER
NOTE: Winged tank extension requires purchase of new seat or modification of current seat. Seats (19-850 & 19-851) will NOT work with 2007-earlier extension kit (04-114).
Ness winged tank extension for bagger < 04-111 >
Shown w/ Bare Bones Solo seat < 19-850 > Shown w/ Sorrento 2-Up seat < 19-851 >
04-1112009-2012, Tank Extension kit
04-1141997-2007, Tank Extension kit
19-850Bare-Bones Solo seat
19-851Sorrento 2-Up seat
22
|
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
$189.95
$99.95
$99.95
$159.95
Our latest dash design looks great on 08-up Road Glide™ or Street Glide™ models. This unique design will bring life to your tank and gives a killer custom look. Constructed of heavy ABS plastic for premium quality and durability.
> Designed to fit 08-Up Street Glide™ and Road Glide™ models (FLHX, FLHT, FLT, FLTR). Will not fit Road King™ (FLHR) models> Available in gloss black or paintable finish> Add a custom Arlen Ness gas cap to compliment your new dash> Will work with factory seat
> Available for all FXR™ models 1982-94> Constructed from high-impact ABS plastic> Conceals brake and electrical components while providing an appealing look> Sold in pairs> Ready for prep and paint!
> Designed for all FXR™ models 1982-94.> Form � tted to go under your seat for easy access to tools, spark
plugs, registration and insurance.> Constructed from durable ABS plastic.
NESS FLOW DASH FOR 2008-UP BAGGER
NESS SIDE COVERS FOR FXR™
NESS STASH TRAY FOR FXR™
04-112Flow dash kit, gloss black
03-600FXR™ side cover kit, pair
20-100FXR™ stash tray
04-113Flow dash kit, paintable
Ness Flow dash < 04-112 >
FXR Side Cover < 03-600 > Stash Tray < 20-100 >
Our latest dash design looks great on 08-up Road Glide™ or Street Glide™ models. This unique design will bring life to your tank and gives a killer custom look. Constructed of heavy ABS
NESS FLOW DASH FOR 2008-UP BAGGER
23
BEFORE AFTER
$299.95
$99.95
$99.95
$299.95
$249.95
> Classic fairing provides protection from the elements> Accepts factory spot lights> Fairing body constructed in heavy ABS, windshield is smoked plexiglass> Fairing kits include: 1 fairing body, 1 smoked windshield, stain less steel mounting brackets and windshield mounting hardware
NESS FLOW DASH FOR 2008-UP BAGGER
NESS SIDE COVERS FOR FXR™
NESS STASH TRAY FOR FXR™
BOB DRON FAIRING KIT FOR ROAD KING™
06-950Bob Dron fairing kit
06-951Replacement windshield, dark smoked
06-952Replacement windshield, light smoked
NOTE: Please check � t and � nish prior to painting. Arlen Ness will not be responsible for any damage sustained to paint jobs.
> Give your Road King™ a full fairing look at a fraction of the cost> Innovative bolt-on design mounts to your factory Road King™ windshield in minutes> Available in gloss black coated or paintable ABS � nishes
NESS WINDSHIELD SKIN FOR ROADKING™
06-940Gloss black � nish
06-941Paintable � nish
Windshield Skin, paintable, installed < 06-941 >
24
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
$349.95
$319.95
$349.95
$319.95
$89.95
> Arlen Ness now offers his famous fairings in a complete kit for simple installation > Complete bolt on kits available for Dyna models 2006-up* > Also, available for Sportster Nightster® models 2004-up or any XL model with 39mm forks, top mount headlight and Nightster® handlebars> Constructed of heavy ABS plastic while the windshield is made from smoked Plexiglass.> Fairing bodies are available in gloss black coated ABS � nish or paintable � nish
* 2006 FXD models with bottom mount headlight. Does NOT � t FXDF & FXDWG Dyna™ models.
DIRECT BOLT-ON FAIRING KIT FOR DYNA™ & SPORTSTER™
06-0332006-up Dyna™, Gloss black � nish*
06-0352006-up Dyna™, Paintable � nish*
06-0372004-up Nightster™, Gloss black � nish
06-0392004-up Nightster™, Paintable � nish
06-047Replacement smoked windshield
Dyna™ Paintable � nish fairing kit < 06-035 >
Nightster™ Gloss Black fairing kit < 06-037 >
25
$199.95
$89.95
$199.95
$24.95
$199.95
$9.95
> The fairing that started it all> Universal design can be used on various applications> Constructed of heavy ABS plastic while the windshield is made from smoked plexiglass.> Each fairing kit includes: 1 fairing body, 1 smoked windshield, universal mounting brackets and windshield mounting screws> Arlen suggests using #08-006 fatbob drag handlebars with this fairing
* Does NOT include brackets. 2006-later Dyna™ models require SKU# 06-087.
NOTE: When mounting fairing to 1973-up H.D. Narrow Glide front ends, we suggest using our custom headlight bracket (06-048) which places the headlight in the correct position. Ness wide glide fairing kits (06-087) require fabrication of custom mounting brackets. Inverted front ends require fabrication of custom mounting brackets as well.
REPLACEMENT ACCESSORIES
NESS ORIGINAL FAIRING KITS
06-041Ness plain fairing kit
06-047Replacement smoked windshield
06-043Ness louvered fairing kit
06-048Custom headlight bracket
06-087*Ness wide-glide & custom mid-glide fairing kit
06-049Replacement fastener kit
DIRECT BOLT-ON FAIRING KIT FOR DYNA™ & SPORTSTER™
Ness Plain fairing kit < 06-041 >
26
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Plain � nish Big Wheeler < 06-764 >
23” Wrapper front fender < 06-745 >
$299.95
$249.95
> This fender perfectly wraps your 23”wheel> Direct bolt-on design for 1987-up FLT models when using a 23” x 3.50” front wheel. No fender spacer required> Fiberglass construction
WRAPPER FRONT FENDER FOR 23” BAGGER WHEELS
06-745Wrapper front fender for Baggers w/ 23” front wheels
> Great styling for the front of your Bagger> A must when using a 21” x 3.50” on 1987-Up FLT models> This � berglass fender is available in a plain � nish and ready for paint
NESS BIG-WHEELER FRONT FENDER
06-764Plain � nish Big-Wheeler
27
Wide Sport Front Fender < 06-027 >
Cafe Front Fender < 06-015 >
Street Dragger Front Fender < 06-741 >
Cafe Front Fender < 06-773 >
$69.95
$79.95
$224.95
$249.95
> Sport fenders designed for a performance look.> Café fender offers classic Ness styling and intended for use on narrow glides with 19” or 21” wheels.> Un-drilled for custom applications.> Constructed from heavy ABS plastic.
ARLEN NESS FRONT FENDERS
WRAPPER FRONT FENDER FOR 23” BAGGER WHEELS
06-0154-3/4” Cafe front fender
06-0276-1/4” Wide-Sport front fender for wide-glide
> Curvaceous design radically improves the front end of your bike> Front fender is designed to � t any of our 21” x 3.50” billet wheels> These quality � berglass fenders are pre-drilled and ready for your custom paint job> Fits 2009-up FLT models and 2010-up Street Glide™ trikes
> Ness styled fender allows for a 23”x 3.50” wheel to be installed on FXST models> Direct bolt-on, does not require spacers or drilling> 16 gauge steel construction
NESS STREET DRAGGER FRONT FENDER
NESS STEEL CAFE FRONT FENDER FOR 23” WHEELS
06-741Street Dragger front fender for FLT models, each
06-773Cafe front fender for 23” front wheels
NESS BIG-WHEELER FRONT FENDER
28
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Street Dragger rear fender, Right < 06-743 >
Street Dragger rear fender, Left < 06-742 >
< TR
IKE
FEN
DER
S | S
HEE
TMET
AL >
|
3129
$399.95
$399.95
> Curvaceous design dramatically improves the rear end of your trike> Rear fenders will � t the factory 15” wheels or any of our billet 18” trike wheels with the appropriate tire> These quality � berglass fenders are pre-drilled and ready for your custom paint job> Fits 2009-up Tri-Glide™ and 2010-up Street-Glide™ trikes> Sold individually
NESS STREET DRAGGER REAR FENDERS FOR TRIKE
06-742Street Dragger rear fender for Trike models, left
06-743Street Dragger rear fender for Trike models, right
$399.95
$399.95
30
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
NOTE: All wheel styles & � tment information on pg. 39-42
BLITZ BILLET WHEELS, ROTORS & PULLEYS
< BL
ITZ
WH
EELS
| W
HEE
LS &
BRA
KES
> |
33
39-42
6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< 10-G
AU
GE | W
HEELS &
BRAKES > |NOTE: All wheel styles & � tment information on pg. 39-42
10-GAUGE BILLET WHEELS, ROTORS & PULLEYS
34
10-GAUGE BILLET WHEELS, ROTORS & PULLEYS
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
NOTE: All wheel styles & � tment information on pg. 39-42
G3 BILLET WHEELS, ROTORS & PULLEYS
6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
35
< G
3 | W
HEE
LS &
BRA
KES
> |
NOTE: All wheel styles & � tment information on pg. 39-42
ENGRAVED BILLET WHEELS, ROTORS & PULLEYSENGRAVED BILLET WHEELS, ROTORS & PULLEYS
36
< EN
GRAVED
| WH
EELS & BRA
KES > |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
NOTE: All wheel styles & � tment information on pg. 39-42
DEEP CUT BILLET WHEELS, ROTORS & PULLEYS
< D
EEP
CU
T | W
HEE
LS &
BRA
KES
> |
37
NOTE: All wheel styles & � tment information on pg. 39-42
SLAYER & EVIL-7 BILLET WHEELS, ROTORS & PULLEYS
SLAYER
EVIL-7
< SLAYER &
EVIL-7 WH
EELS | WH
EELS & BRA
KES > |
SLAYER
NOTE:
SLAYER & EVIL-7 BILLET WHEELS, ROTORS & PULLEYS
EVIL-7EVIL-7
38
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< FR
ON
T W
HEE
L FI
TMEN
T | W
HEE
LS &
BRA
KES
> |
> FRONT WHEEL APPLICATIONS
011-01001011-01002011-01003011-01004011-01005011-01006011-01007
011-04008011-04009011-04001011-04002011-04005011-04006011-04010011-04003011-04004011-04011011-04012011-04013011-04014011-04007011-04015
011-08016011-08017011-08018011-08019011-08014011-08020011-08021011-08022011-08023011-08024011-08025011-08026011-08077011-08027011-08028011-08029011-08030011-08031011-08032011-08033011-08034
011-09008011-09035011-09009011-09001011-09036011-09002011-09016011-09017011-09019011-09014011-09021011-09022011-09023011-09026011-09015
011-10008011-10035011-10009011-10001011-10036011-10002011-10016011-10017011-10019011-10014011-10021011-10015011-10038
011-11008011-11035011-11009011-11001011-11036
16” x 3.50”00-07 FLTR/FLHT/FLHR84-99 FLTR/FLHT/FLHR00-06 FLST86-99 FLST07-12 FLST2011-2012 FLST, ABS2011-2012 XL 4818” x 3.50”08-12 FLTR/FLHT/FLHR (Non ABS)08-12 FLTR/FLHT/FLHR (ABS)00-07 FLTR/FLHT/FLHR84-99 FLTR/FLHT/FLHR07-12 FLST2011-2012 FLST, ABS2011-2012 FLSTF/N/C, ABS00-06 FLST86-99 FLST08-12 FLSTF/N/C2007 FLSTF08-12 FLSTSB84-99 FXST, FXDWG2011-2012 XL 4802-07 V-ROD21” x 2.15”07-12 FXST2011-2012 FXST, ABS08-12 XL Except 48 & XR00-06 FXST, 00-05 FXDWG84-99 FXST, FXDWGDual 84-99 FXST/FXDWG00-06 FXSTS08-10 FXDF06-07 FXDWG08-12 FXCW2011-2012 FXCW, ABS08-12 FXD/B/C/L08-12 FXDWG06-07 FXD04-05 FXDSingle 00-03 FXD/00-07 XLSingle 84-99 FXD/FXR/XLDual 00-03 FXD/00-07 XLDual 84-99 FXD/FXR/XL2007 Deuce2000-2006 Deuce21” x 3.50”08-12 FLTR/FLHT/FLHR (Non ABS)08-12 FLTR/FLHT/FLHR, S/D, Non-ABS08-12 FLTR/FLHT/FLHR (ABS)00-07 FLTR/FLHT/FLHR00-07 FLTR/FLHT/FLHR, S/D84-99 FLTR/FLHT/FLHR07-12 FXST2011-2012 FXST, ABS00-06 FXST/00-05 FXDWG84-99 FXST, FXDWG00-06 FXSTS08-10 FXDF06-07 FXDWG08-12 FXD/B/C/L02-07 V-ROD23” x 3.50”08-12 FLTR/FLHT/FLHR (Non ABS)08-12 FLTR/FLHT/FLHR, S/D, Non-ABS08-12 FLTR/FLHT/FLHR (ABS)00-07 FLTR/FLHT/FLHR00-07 FLTR/FLHT/FLHR, S/D84-99 FLTR/FLHT/FLHR07-12 FXST2011-2012 FXST, ABS00-06 FXST/00-05 FXDWG84-99 FXST, FXDWG00-06 FXSTS02-07 V-RODNess Motorcycle26” x 3.50”08-12 FLTR/FLHT/FLHR (Non ABS)08-12 FLTR/FLHT/FLHR, S/D, Non-ABS08-12 FLTR/FLHT/FLHR (ABS)00-07 FLTR/FLHT/FLHR00-07 FLTR/FLHT/FLHR, S/D
012-01001012-01002012-01003012-01004012-01005012-01006012-01007
012-04008012-04009012-04001012-04002012-04005012-04006012-04010012-04003012-04004012-04011012-04012012-04013012-04014012-04007012-04015
012-08016012-08017012-08018012-08019012-08014012-08020012-08021012-08022012-08023012-08024012-08025012-08026012-08077012-08027012-08028012-08029012-08030012-08031012-08032012-08033012-08034
012-09008012-09035012-09009012-09001012-09036012-09002012-09016012-09017012-09019012-09014012-09021012-09022012-09023012-09026012-09015
012-10008012-10035012-10009012-10001012-10036012-10002012-10016012-10017012-10019012-10014012-10021012-10015012-10038
012-11008012-11035012-11009012-11001012-11036
021-01001021-01002021-01003021-01004021-01005021-01006021-01007
021-04008021-04009021-04001021-04002021-04005021-04006021-04010021-04003021-04004021-04011021-04012021-04013021-04014021-04007021-04015
021-08016021-08017021-08018021-08019021-08014021-08020021-08021021-08022021-08023021-08024021-08025021-08026021-08077021-08027021-08028021-08029021-08030021-08031021-08032021-08033021-08034
021-09008021-09035021-09009021-09001021-09036021-09002021-09016021-09017021-09019021-09014021-09021021-09022021-09023021-09026021-09015
021-10008021-10035021-10009021-10001021-10036021-10002021-10016021-10017021-10019021-10014021-10021021-10015021-10038
021-11008021-11035021-11009021-11001021-11036
022-01001022-01002022-01003022-01004022-01005022-01006022-01007
022-04008022-04009022-04001022-04002022-04005022-04006022-04010022-04003022-04004022-04011022-04012022-04013022-04014022-04007022-04015
022-08016022-08017022-08018022-08019022-08014022-08020022-08021022-08022022-08023022-08024022-08025022-08026022-08077022-08027022-08028022-08029022-08030022-08031022-08032022-08033022-08034
022-09008022-09035022-09009022-09001022-09036022-09002022-09016022-09017022-09019022-09014022-09021022-09022022-09023022-09026022-09015
022-10008022-10035022-10009022-10001022-10036022-10002022-10016022-10017022-10019022-10014022-10021022-10015022-10038
022-11008022-11035022-11009022-11001022-11036
031-01001031-01002031-01003031-01004031-01005031-01006031-01007
031-04008031-04009031-04001031-04002031-04005031-04006031-04010031-04003031-04004031-04011031-04012031-04013031-04014031-04007031-04015
031-08016031-08017031-08018031-08019031-08014031-08020031-08021031-08022031-08023031-08024031-08025031-08026031-08077031-08027031-08028031-08029031-08030031-08031031-08032031-08033031-08034
031-09008031-09035031-09009031-09001031-09036031-09002031-09016031-09017031-09019031-09014031-09021031-09022031-09023031-09026031-09015
031-10008031-10035031-10009031-10001031-10036031-10002031-10016031-10017031-10019031-10014031-10021031-10015031-10038
--------------------
032-01001032-01002032-01003032-01004032-01005032-01006032-01007
032-04008032-04009032-04001032-04002032-04005032-04006032-04010032-04003032-04004032-04011032-04012032-04013032-04014032-04007032-04015
032-08016032-08017032-08018032-08019032-08014032-08020032-08021032-08022032-08023032-08024032-08025032-08026032-08077032-08027032-08028032-08029032-08030032-08031032-08032032-08033032-08034
032-09008032-09035032-09009032-09001032-09036032-09002032-09016032-09017032-09019032-09014032-09021032-09022032-09023032-09026032-09015
032-10008032-10035032-10009032-10001032-10036032-10002032-10016032-10017032-10019032-10014032-10021032-10015032-10038
--------------------
10 GAUGE, CHROME 10 GAUGE, BLACK G3, CHROME G3, BLACK ENGRAVED, CHROME ENGRAVED, BLACK39
< FRO
NT W
HEEL FITM
ENT | W
HEELS &
BRAKES > |
041-01001041-01002041-01003041-01004041-01005041-01006041-01007
041-04008041-04009041-04001041-04002041-04005041-04006041-04010041-04003041-04004041-04011041-04012041-04013041-04014041-04007041-04015
041-08016041-08017041-08018041-08019041-08014041-08020041-08021041-08022041-08023041-08024041-08025041-08026041-08077041-08027041-08028041-08029041-08030041-08031041-08032041-08033041-08034
041-09008041-09035041-09009041-09001041-09036041-09002041-09016041-09017041-09019041-09014041-09021041-09022041-09023041-09026041-09015
041-10008041-10035041-10009041-10001041-10036041-10002041-10016041-10017041-10019041-10014041-10021041-10015041-10038
--------------------
042-01001042-01002042-01003042-01004042-01005042-01006042-01007
042-04008042-04009042-04001042-04002042-04005042-04006042-04010042-04003042-04004042-04011042-04012042-04013042-04014042-04007042-04015
042-08016042-08017042-08018042-08019042-08014042-08020042-08021042-08022042-08023042-08024042-08025042-08026042-08077042-08027042-08028042-08029042-08030042-08031042-08032042-08033042-08034
042-09008042-09035042-09009042-09001042-09036042-09002042-09016042-09017042-09019042-09014042-09021042-09022042-09023042-09026042-09015
042-10008042-10035042-10009042-10001042-10036042-10002042-10016042-10017042-10019042-10014042-10021042-10015042-10038
--------------------
051-01001051-01002051-01003051-01004051-01005051-01006051-01007
051-04008051-04009051-04001051-04002051-04005051-04006051-04010051-04003051-04004051-04011051-04012051-04013051-04014051-04007051-04015
051-08016051-08017051-08018051-08019051-08014051-08020051-08021051-08022051-08023051-08024051-08025051-08026051-08077051-08027051-08028051-08029051-08030051-08031051-08032051-08033051-08034
051-09008051-09035051-09009051-09001051-09036051-09002051-09016051-09017051-09019051-09014051-09021051-09022051-09023051-09026051-09015
051-10008051-10035051-10009051-10001051-10036051-10002051-10016051-10017051-10019051-10014051-10021051-10015051-10038
--------------------
061-01001061-01002061-01003061-01004061-01005061-01006061-01007
061-04008061-04009061-04001061-04002061-04005061-04006061-04010061-04003061-04004061-04011061-04012061-04013061-04014061-04007061-04015
061-08016061-08017061-08018061-08019061-08014061-08020061-08021061-08022061-08023061-08024061-08025061-08026061-08077061-08027061-08028061-08029061-08030061-08031061-08032061-08033061-08034
061-09008061-09035061-09009061-09001061-09036061-09002061-09016061-09017061-09019061-09014061-09021061-09022061-09023061-09026061-09015
061-10008061-10035061-10009061-10001061-10036061-10002061-10016061-10017061-10019061-10014061-10021061-10015061-10038
--------------------
071-01001071-01002071-01003071-01004071-01005071-01006071-01007
071-04008071-04009071-04001071-04002071-04005071-04006071-04010071-04003071-04004071-04011071-04012071-04013071-04014071-04007071-04015
071-08016071-08017071-08018071-08019071-08014071-08020071-08021071-08022071-08023071-08024071-08025071-08026071-08077071-08027071-08028071-08029071-08030071-08031071-08032071-08033071-08034
071-09008071-09035071-09009071-09001071-09036071-09002071-09016071-09017071-09019071-09014071-09021071-09022071-09023071-09026071-09015
071-10008071-10035071-10009071-10001071-10036071-10002071-10016071-10017071-10019071-10014071-10021071-10015071-10038
072-01001072-01002072-01003072-01004072-01005072-01006072-01007
072-04008072-04009072-04001072-04002072-04005072-04006072-04010072-04003072-04004072-04011072-04012072-04013072-04014072-04007072-04015
072-08016072-08017072-08018072-08019072-08014072-08020072-08021072-08022072-08023072-08024072-08025072-08026072-08077072-08027072-08028072-08029072-08030072-08031072-08032072-08033072-08034
072-09008072-09035072-09009072-09001072-09036072-09002072-09016072-09017072-09019072-09014072-09021072-09022072-09023072-09026072-09015
072-10008072-10035072-10009072-10001072-10036072-10002072-10016072-10017072-10019072-10014072-10021072-10015072-10038
071-11008071-11035071-11009071-11001071-11036
072-11008072-11035072-11009072-11001072-11036
DEEP CUT, CHROME BLITZ, CHROMEDEEP CUT, BLACK BLITZ, BLACKSLAYER, CHROME EVIL-7, CHROME
40
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< RE
AR
WH
EEL
FITM
ENT | W
HEE
LS &
BRA
KES
> |
> REAR WHEEL APPLICATIONS
16” x 3.50”2008 FLT (NON-ABS)02-07 FLT00-01 FLT86-99 FLT2008-10 FLSTN/FLSTC00-05 FXST/00-07 FLST00-05 FXD/FXDWG86-99 FX/FL2011-2012 FLSTN/C2011-2012 FLSTN/C ABS2011-2012 XL 4800-07 XL16” x 5.00”2009-12 FLT (Non ABS)2009-12 FLT (ABS)17” x 6.25”08-12 FXST/08-10 FLSTF2011-2012 FXST, ABS2011-2012 FLSTF/FB/SB2011-2012 FLSTF/FB/SB, ABS2007 FXST/FLSTF2006 FXST/2006 FLSTFSE18” x 3.50”2008 FLTR/FLHT/FLHR (Non ABS)2008 FLTR/FLHT/FLHR (ABS)02-07 FLT00-01 FLT86-99 FLT2008-10 FLSTN/FLSTC00-05 FXST/00-07 FLST86-99 FX/FL00-05 FXD/FXDWG2011-2012 FLSTN/C2011-2012 FLSTN/C, ABS08-12 XL Except 48 & XR2011-2012 XL 4800-07 XL18” x 5.5009-12 FLT 180mm (Non ABS)09-12 FLT 180mm (ABS)2008 FLT 180mm (Non ABS)2008 FLT 180mm (ABS)08-12 FXST2011-2012 FXST, ABS08-12 FXD06-07 FXD86-07 BIG TWIN/DEUCE02-07 V-RODCUSTOM WIDEDRIVE-SIDETri-Glide/Street-Glide Trike18” x 8.50”CUSTOM WIDEDRIVE-SIDE08-12 FXCW2011-2012 FXCW, ABS2007 V-Rod 240mm18” x 10.50”CUSTOM WIDENess Motorcycle
011-01039011-01040011-01041011-01042011-01043011-01044011-01045011-01046011-01047011-01048011-01049011-01050
011-02051011-02052
011-03053011-03054011-03055011-03056011-03057011-03058
011-04059011-04060011-04040011-04041011-04042011-04043011-04044011-04046011-04045011-04047011-04048011-04061011-04049011-04050
011-05062011-05063011-05064011-05065011-05066011-05054011-05067011-05068011-05069011-05070011-05071011-05072011-05073
011-06071011-06072011-06074011-06075011-06078
011-07071011-07076
012-01039012-01040012-01041012-01042012-01043012-01044012-01045012-01046012-01047012-01048012-01049012-01050
012-02051012-02052
012-03053012-03054012-03055012-03056012-03057012-03058
012-04059012-04060012-04040012-04041012-04042012-04043012-04044012-04046012-04045012-04047012-04048012-04061012-04049012-04050
012-05062012-05063012-05064012-05065012-05066012-05054012-05067012-05068012-05069012-05070012-05071012-05072012-05073
012-06071012-06072012-06074012-06075012-06078
012-07071012-07076
021-01039021-01040021-01041021-01042021-01043021-01044021-01045021-01046021-01047021-01048021-01049021-01050
021-02051021-02052
021-03053021-03054021-03055021-03056021-03057021-03058
021-04059021-04060021-04040021-04041021-04042021-04043021-04044021-04046021-04045021-04047021-04048021-04061021-04049021-04050
021-05062021-05063021-05064021-05065021-05066021-05054021-05067021-05068021-05069021-05070021-05071021-05072021-05073
021-06071021-06072021-06074021-06075021-06078
021-07071021-07076
022-01039022-01040022-01041022-01042022-01043022-01044022-01045022-01046022-01047022-01048022-01049022-01050
022-02051022-02052
022-03053022-03054022-03055022-03056022-03057022-03058
022-04059022-04060022-04040022-04041022-04042022-04043022-04044022-04046022-04045022-04047022-04048022-04061022-04049022-04050
022-05062022-05063022-05064022-05065022-05066022-05054022-05067022-05068022-05069022-05070022-05071022-05072022-05073
022-06071022-06072022-06074022-06075022-06078
022-07071022-07076
031-01039031-01040031-01041031-01042031-01043031-01044031-01045031-01046031-01047031-01048031-01049031-01050
031-02051031-02052
031-03053031-03054031-03055031-03056031-03057031-03058
031-04059031-04060031-04040031-04041031-04042031-04043031-04044031-04046031-04045031-04047031-04048031-04061031-04049031-04050
031-05062031-05063031-05064031-05065031-05066031-05054031-05067031-05068031-05069031-05070031-05071031-05072031-05073
031-06071031-06072031-06074031-06075031-06078
031-07071031-07076
032-01039032-01040032-01041032-01042032-01043032-01044032-01045032-01046032-01047032-01048032-01049032-01050
032-02051032-02052
032-03053032-03054032-03055032-03056032-03057032-03058
032-04059032-04060032-04040032-04041032-04042032-04043032-04044032-04046032-04045032-04047032-04048032-04061032-04049032-04050
032-05062032-05063032-05064032-05065032-05066032-05054032-05067032-05068032-05069032-05070032-05071032-05072032-05073
032-06071032-06072032-06074032-06075032-06078
032-07071032-07076
10 GAUGE, CHROME 10 GAUGE, BLACK G3, CHROME G3, BLACK ENGRAVED, CHROME ENGRAVED, BLACK41
< REA
R WH
EEL FITMEN
T | WH
EELS & BRA
KES > |
$1,899.95 $1,399.95$1,399.95$1,299.95$1,699.95$1,599.95$1,299.95$1,199.95$1,299.95$1,199.95$1,199.95
$1,899.95 $1,599.95$1,599.95$1,499.95$1,899.95$1,799.95$1,499.95$1,399.95$1,499.95$1,399.95$1,399.95
BLITZ & 10-GAUGE WHEEL PRICINGNESS BILLET WHEEL PRICING
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
..............................................................
26” x 3.50”23” x 3.50”21” x 3.50”21” x 2.15”18” x 10.50”18” x 8.50”18” x 5.50”18” x 3.50”17” x 6.25”16” x 5.00”16” x 3.50”
26” x 3.50”23” x 3.50”21” x 3.50”21” x 2.15”18” x 10.50”18” x 8.50”18” x 5.50”18” x 3.50”17” x 6.25”16” x 5.00”16” x 3.50”
WHEEL SIZE WHEEL SIZE
041-01039041-01040041-01041041-01042041-01043041-01044041-01045041-01046041-01047041-01048041-01049041-01050
041-02051041-02052
041-03053041-03054041-03055041-03056041-03057041-03058
041-04059041-04060041-04040041-04041041-04042041-04043041-04044041-04046041-04045041-04047041-04048041-04061041-04049041-04050
041-05062041-05063041-05064041-05065041-05066041-05054041-05067041-05068041-05069041-05070041-05071041-05072041-05073
041-06071041-06072041-06074041-06075041-06078
041-07071041-07076
042-01039042-01040042-01041042-01042042-01043042-01044042-01045042-01046042-01047042-01048042-01049042-01050
042-02051042-02052
042-03053042-03054042-03055042-03056042-03057042-03058
042-04059042-04060042-04040042-04041042-04042042-04043042-04044042-04046042-04045042-04047042-04048042-04061042-04049042-04050
042-05062042-05063042-05064042-05065042-05066042-05054042-05067042-05068042-05069042-05070042-05071042-05072042-05073
042-06071042-06072042-06074042-06075042-06078
042-07071042-07076
051-01039051-01040051-01041051-01042051-01043051-01044051-01045051-01046051-01047051-01048051-01049051-01050
051-02051051-02052
051-03053051-03054051-03055051-03056051-03057051-03058
051-04059051-04060051-04040051-04041051-04042051-04043051-04044051-04046051-04045051-04047051-04048051-04061051-04049051-04050
051-05062051-05063051-05064051-05065051-05066051-05054051-05067051-05068051-05069051-05070051-05071051-05072051-05073
051-06071051-06072051-06074051-06075051-06078
051-07071051-07076
061-01039061-01040061-01041061-01042061-01043061-01044061-01045061-01046061-01047061-01048061-01049061-01050
061-02051061-02052
061-03053061-03054061-03055061-03056061-03057061-03058
061-04059061-04060061-04040061-04041061-04042061-04043061-04044061-04046061-04045061-04047061-04048061-04061061-04049061-04050
061-05062061-05063061-05064061-05065061-05066061-05054061-05067061-05068061-05069061-05070061-05071061-05072061-05073
061-06071061-06072061-06074061-06075061-06078
061-07071061-07076
071-01039071-01040071-01041071-01042071-01043071-01044071-01045071-01046071-01047071-01048071-01049071-01050
071-02051071-02052
071-03053071-03054071-03055071-03056071-03057071-03058
071-04059071-04060071-04040071-04041071-04042071-04043071-04044071-04046071-04045071-04047071-04048071-04061071-04049071-04050
071-05062071-05063071-05064071-05065071-05066071-05054071-05067071-05068071-05069071-05070071-05071071-05072071-05073
071-06071071-06072071-06074071-06075071-06078
071-07071071-07076
072-01039072-01040072-01041072-01042072-01043072-01044072-01045072-01046072-01047072-01048072-01049072-01050
072-02051072-02052
072-03053072-03054072-03055072-03056072-03057072-03058
072-04059072-04060072-04040072-04041072-04042072-04043072-04044072-04046072-04045072-04047072-04048072-04061072-04049072-04050
072-05062072-05063072-05064072-05065072-05066072-05054072-05067072-05068072-05069072-05070072-05071072-05072072-05073
072-06071072-06072072-06074072-06075072-06078
072-07071072-07076
DEEP CUT, CHROME BLITZ, CHROMEDEEP CUT, BLACK BLITZ, BLACKSLAYER, CHROME EVIL-7, CHROME
42
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Engraved, chrome > Blitz, chrome
> 10 Gauge, chrome
> Engraved, black > Blitz, black
> 10 Gauge, chrome
> Blitz, chrome > Blitz, black
FRONT
$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95$299.95
Arlen Ness � oating rotors are the ultimate in style and performance. Every detail is tested thoroughly to ensure premium quality and long term use. These rotors are constructed of chrome plated or black anodized billet aluminum carrier and a mirror polished 420 stain-less steel rotor. Our two-piece design eliminates vibration associated with early one-piece rotors. The 420 stainless rotors are slotted in order to disperse heat during braking. Sold individually.
NOTE: 1984-2012 FLH & FLT rear OEM rotor must be used (no rear � tment due to thickness)
NESS TWO-PIECE BRAKE ROTORS
11.8”STYLE
FRONT/REAR FITMENT FRONT REAR
Evil-7, ChromeDeep Cut, ChromeDeep Cut, BlackEngraved, ChromeEngraved, BlackG3, ChromeG3, Black10 Gauge, Chrome10 Gauge, BlackSlayer, Left, ChromeSlayer, Right, ChromeBlitz, Right, ChromeBlitz, Right, BlackBlitz, Left, ChromeBlitz, Left, Black
11.5”02-72002-73302-73502-73702-73902-75002-75202-75402-75602-72302-72602-75802-75902-76202-763
02-70002-73402-73602-73802-74002-75102-75302-75502-75702-70302-71002-76002-76102-76402-765
FXSTDYNA pre 2005DYNA 2006 - 2011XLFLH / FLT 1984 - 2007*FLH / FLT 2008 - 2011*
11.5”11.5”11.8”11.5”11.5”11.8”
11.5”11.5”11.5”11.5” ----- -----
> G3, black> G3, chrome
> Deep Cut, black
> Evil-7, chrome> Evil-7, chrome > Slayer, chrome
> Deep Cut, chrome
> 10 Gauge, black
< N
ESS
ROTO
RS |
WH
EELS
& B
RAKE
S >
|
43
> Blitz, black
NESS DRIVE PULLEYS
NOTE: Use P/N 28-381 to mount pulleys on 2007-2008 FLT models. pulley hardware use P/N 01-920
65T Wide70T Wide70T Narrow65T Narrow70T FLHT 2004-200670T RSD Wide70T RSD Narrow70T 2006 FXST66T 2007-2012 25mm (FLST)66T 2007-2008 25mm (FLT)66T 2007-2012 25mm (DYNA)66T 2007-2012 20mm (FXST/FLSTF)
Arlen Ness billet pulleys are machined in matching patterns to our wheels and machined on both sides for a complete � nish. Carved from 6061-T6 aluminum and either chrome plated or black anodized. Featuring hard anodized teeth these pulleys offer unmatched strength and durability. Supplied with appropriate hardware and spacers based on theapplication, pulleys arrive with everything you need to install on your bike.
16-67216-67416-67316-67116-62716-55216-57216-92716-67516-67616-67816-586
----------
16-966-------------------------
16-98616-98716-98816-989
------------------------------------------------------------
----------
16-976-------------------------
16-99616-99716-99816-999
65T Wide70T Wide70T Narrow65T Narrow70T FLHT 2004-200670T RSD Wide70T RSD Narrow70T 2006 FXST66T 2007-2012 25mm (FLST)66T 2007-2008 25mm (FLT)66T 2007-2012 25mm (DYNA)66T 2007-2012 20mm (FXST/FLSTF)
16-91416-91816-91616-91216-62916-91816-91616-92816-90816-90916-91016-587
------------------------------------------------------------
EVIL-7
EVIL-7
CHROME
BLACK
----------
16-501-----
16-501---------------
16-50316-50516-50616-507
----------
16-531-----
16-531---------------
16-53316-53516-53616-537
DEEP CUT
DEEP CUT
----------
16-940-----
16-940---------------
16-94216-94316-94416-945
----------
16-950-----
16-950---------------
16-95216-95316-95416-955
ENGRAVED
ENGRAVED
----------
16-960-----
16-960---------------
16-96216-96316-96416-965
----------
16-970-----
16-970---------------
16-97216-97316-97416-975
G3
G3
----------
16-980-----
16-980---------------
16-98116-98316-98216-984
----------
16-990-----
16-990---------------
16-99116-99316-99216-994
10-GAUGE
10-GAUGE
SLAYER
SLAYER
BLITZ
BLITZ
$599.95$599.95$599.95$599.95$599.95$599.95$599.95$599.95$599.95$599.95$599.95$599.95
$599.95-----
$599.95-----
$599.95---------------
$599.95$599.95$599.95$599.95
NESS TWO-PIECE BRAKE ROTORS
> Engraved, chrome > Engraved, black
> G3, chrome
> 10 Gauge, chrome
> G3, black > Deep Cut, chrome > Deep Cut, black
> 10 Gauge, black
> Slayer, chrome > Blitz, black> Evil-7, chrome > Blitz, chrome
> Slayer, chrome
44
< N
ESS PULEYS | W
HEELS &
BRAKES > |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
2008-2012 FLT Left Caliper Housing, Chrome < 02-847 >Right Caliper Housing, Chrome < 02-849 >
> Ness billet housings give you a new look while accepting your original pistons, seals, pads, and internal hardware> Since the stock calipers work better than ever before, it’s no longer necessary to buy a bunch of unnecessary components> Get the look you want at a fraction of the cost!> Available in chrome or black anodized finish.> Dual disc applications require purchasing the right side and left side calipers separately> Available for most late model applications> Rear Caliper Housing kits require the use of the factory caliper bracket> Made in the USA
NESS BILLET BRAKE CALIPER HOUSINGS FOR HD®
2008-2012 FLT MODELS (FRONT ONLY)
2008-2012 SOFTAIL™ & DYNA™ MODELS (FRONT)
2008-2012 SOFTAIL™ & DYNA™ MODELS (REAR)
2007-2012 SPORTSTER™ MODELS (FRONT)
2008-2012 SPORTSTER™ MODELS (REAR)
SEAL KITS
NOTE: Replacement seals are not included. They must be purchased separately.
02-846Left Caliper Housing kit, Chrome
02-840Left Caliper Housing kit, Chrome
02-861Left Caliper Housing kit, Chrome
02-848Right Caliper Housing kit, Chrome
02-842Rear Caliper Housing kit, Chrome
02-810Left Caliper Housing kit, Chrome
02-845Repl. Seal kit for 2008-2012 FLT (Front) 2 required per bike
02-820Repl. Seal kit for 2008-2012 Dyna & Softail (Front)
02-821Repl. Seal kit for 2008-2012 Dyna & Softail (Rear)
02-822Repl. Seal kit for 2007-2012 Sportster (Front)
02-823Repl. Seal kit for 2007-2012 Sportster (Rear)
02-847Left Caliper Housing kit, Black
02-841Left Caliper Housing kit, Black
02-862Left Caliper Housing kit, Black
02-849Right Caliper Housing kit, Black
02-843Rear Caliper Housing kit, Black
02-811Left Caliper Housing kit, Black
2008-2012 FLT Left Front Caliper Housing, Chrome < 02-846 >Right Front Caliper Housing, Chrome < 02-848 >
2008-2012 FLT Left Front Caliper Housing, Black < 02-847 >Right Front Caliper Housing, Black < 02-849 >
2008-2012 Softail™ & Dyna™ Left Caliper Housing, Chrome < 02-840 >Left Caliper Housing, Black < 02-841 >
$199.95
$199.95
$199.95
$199.95
$199.95
$199.95
$19.95
$19.95
$19.95
$19.95
$19.95
$199.95
$199.95
$199.95
$199.95
$199.95
$199.95
46
< N
ESS CA
LIPER HO
USIN
GS | W
HEELS &
BRAKES > |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Heel/Toe Shifter Kits combine unique design with premium function> CNC machined from 6061-T6 billet aluminum > Available in Deep Cut, Retro, and Battistini styles > Each style has matching brake arm, � oorboards, and many other accessories > Offered in chrome or black anodize � nish
NESS HEEL/TOE SHIFTER
HEEL/TOE SHIFT KITS
19-7911997-2012 FLT, Deep Cut, chrome
19-7931997-2012 FLT, Retro, chrome
19-4581984-up FLT / Touring, Battistini, chrome
19-7921997-2012 FLT, Deep Cut, black
19-7901997-2012 FLT,Retro w/o shift pegs
19-4591984-up FLT / Touring, Battistini, black
< H
EEL/
TO
E SH
IFTE
R KI
TS |
FOO
T C
ON
TRO
LS >
|
49
Deep Cut, black installed < 19-798 >
> Deep Cut, chrome
> Deep Cut, black
> Retro, chrome
> Battistini, chrome
> Battistini, black
Deep Cut, black installed < 19-798 >
> Deep Cut, chrome
> Deep Cut, black
$324.95
$299.95
$349.95
$324.95
$249.95
$349.95
> New for 2012 > Solo shift levers are CNC machined from billet aluminum in the USA > Adds clean style to your foot control section> Available in Deep Cut and Battistini styles > Offered in chrome or black anodize � nish
> New for 2012 > CNC machined from 6061-T6 billet aluminum > Replaces stock shifter rod lever > Finishing touch for your shift section > Available in Deep Cut and Battistini styles > Offered in chrome or black anodize � nish
NESS SOLO SHIFTER KITS
NESS INNER SHIFT LEVERS
SOLO SHIFTER KIT
INNER SHIFT LEVER
19-7562000-2012 FLT / FXST / FXD, Deep Cut, chrome
19-7582000-2012 FLT / FXST / FXD, Deep Cut, chrome
19-4501984-up FLT / Touring, Battistini, chrome
19-4001984-up FLT / Touring, Battistini, chrome
19-7572000-2012 FLT / FXST / FXD, Deep Cut, black
19-7592000-2012 FLT / FXST / FXD, Deep Cut, black
19-4511984-up FLT / Touring, Battistini, black
19-4011984-up FLT / Touring, Battistini, black
50
< SO
LO /
INN
ER SHIFTER KITS | FO
OT C
ON
TROLS > |
> Battistini, chrome > Battistini, black
NESS INNER SHIFT LEVERS
> Deep Cut, chrome > Deep Cut, black
1984-up FLT / Touring, Battistini, black
> Battistini, black
> Battistini, chrome > Deep Cut, chrome
> Deep Cut, black
$169.95
$99.95
$214.95
$139.95
$169.95
$99.95
$214.95
$139.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< BR
AKE
PED
ALS
| FO
OT
CO
NTR
OLS
> |
51
NESS BRAKE PEDALS & HEEL/TOE PACKAGE KITS
HEEL/TOE & BRAKE ARM KIT
BRAKE PEDAL KIT
19-797 1997-2007 FLT, Deep Cut, chrome
19-799 1997-2007 FLT, Retro, chrome
19-794 2008-2012 FLT, Deep Cut, chrome
19-7731997-2007 FLT, Deep Cut, chrome
19-7761997-2007 FLT, Retro, chrome
19-7522000-2012 FXST, Deep Cut, chrome
19-7742008-2012 FLT, Deep Cut, chrome
19-7502000-2012 FLST, Deep Cut, chrome
19-7772008-2012 FLT, Retro, chrome
19-7542003-2012 FXDWG & 08-12 FXDB, Deep Cut, chrome
19-798 1997-2007 FLT, Deep Cut, black
19-796 2008-2012 FLT, Retro, chrome
19-795 2008-2012 FLT, Deep Cut, black
19-7681997-2007 FLT, Deep Cut, black
19-7721997-2007 FLT, Retro, chrome (w/o shifter peg)
19-7532000-2012 FXST, Deep Cut, black
19-7782008-2012 FLT, Deep Cut, black
19-7512000-2012 FLST, Deep Cut, black
19-7752008-2012 FLT, Retro, chrome (w/o shifter peg)
19-7552003-2012 FXDWG & 08-12 FXDB, Deep Cut, black
2000-2007 FLT2008-2012 FLT
2000-2012 FLST
PRE-2000 FLST
2000-2012 FXST
PRE-2000 FXST
07-55007-55207-55407-55607-558 07-556
07-55107-55307-55507-55707-55907-557
CHROMEBATTISTINI PEDAL BLACK
HEEL/TOE & BRAKE ARM KIT
PRE-2000 FXST 07-556 07-557
< BRA
KE PEDA
LS | FOO
T CO
NTRO
LS > |
52
> Battistini, black
> Battistini, chrome
> Retro, chrome
> Deep Cut, black, FXD
> Deep Cut, chrome, FXD
> Deep Cut, chrome
> Deep Cut, black
> Retro, chrome> Retro, chrome
> Deep Cut, chrome> Deep Cut, chrome
> Deep Cut, black
$499.95
$469.95
$499.95
$249.95
$229.95
$229.95
$249.95
$249.95
$229.95
$229.95
$499.95
$469.95
$499.95
$249.95
$199.95
$199.95
$249.95
$249.95
$199.95
$199.95
$329.95$329.95$329.95$329.95$329.95$329.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< FU
SIO
N S
ERIE
S PE
GS
| FO
OT
CO
NTR
OLS
> |
53
> Deep Cut Fusion, Black > Deep Cut Fusion, Chrome
> Knurled Fusion, Chrome> Knurled Fusion, Black
> Smooth Fusion, Black > Smooth Fusion, Chrome
< FU
SION
SERIES PEGS | FO
OT C
ON
TROLS > |
54
> The perfect fusion of traction, style and comfort> Fusion footpegs are reinforced with forged steel for extreme durability, knurled and linear rubber inserts for excellent traction, and billet aluminum accents for a great look. > Fusion shifter pegs are molded rubber pegs that feature intgrated mounting stud with billet aluminum accents.> Several styles to choose from in chrome and black anodized � nishes> Matching grips are available separately on pg. 73-74
NESS FUSION FOOTPEGS & SHIFTER / BRAKE PEGS
FOOTPEGS
SHIFTER / BRAKE PEG
07-908
07-909
07-924
07-925
07-906
07-907
07-900
07-901
07-920
07-921
07-918
07-919
07-926
07-927
07-916
07-917
07-910
07-911
07-922
07-923
Deep Cut Fusion, chrome
Deep Cut Fusion, black
Knurled Fusion, chrome
Knurled Fusion, black
Ring Leader Fusion, chrome
Ring Leader Fusion, black
Slot Track Fusion, chrome
Slot Track Fusion, black
Smooth Fusion, chrome
Smooth Fusion, black
Deep Cut Fusion, chrome
Deep Cut Fusion, black
Knurled Fusion, chrome
Knurled Fusion, black
Ring Leader Fusion, chrome
Ring Leader Fusion, black
Slot Track Fusion, chrome
Slot Track Fusion, black
Smooth Fusion, chrome
Smooth Fusion, black
FUSIO
N SERIES PEG
S | FOO
T CO
NTRO
LS
> Slot Track, Black
> Slot Track, Chrome
> Ring Leader, Chrome
> Ring Leader, Black
$89.95
$89.95
$49.95
$49.95
$69.95
$69.95
$89.95
$89.95
$59.95
$59.95
$29.95
$29.95
$19.95
$19.95
$29.95
$29.95
$29.95
$29.95
$29.95
$29.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Our billet and rubber Soft-Touch Series foot and shifter pegs provide great styling with excellent foot traction. Machined from 6061-T6 billet aluminum. These pegs are made from the � nest materials available.> Available with dimpled or knurled style rubber > Available in chrome or black anodized � nishes> Matching Grips pg. 77
SOFT-TOUCH BILLET FOOTPEGS & SHIFTER PEGS
FOOTPEGS
SHIFTER / BRAKE PEG
06-120Scalloped, chrome, knurled rubber, pair
06-154Engraved, chrome, dimpled rubber, pair
06-150Scalloped, chrome, dimpled rubber, pair
06-158Smooth, chrome, dimpled rubber, pair
06-122Scalloped, chrome, knurled rubber, each
06-155Engraved, chrome, dimpled rubber, each
06-151Scalloped, chrome, dimpled rubber, each
06-159Smooth, chrome, dimpled rubber, each
06-121Scalloped, black, knurled rubber, pair
06-156Engraved, black, dimpled rubber, pair
06-152Scalloped, black, dimpled rubber, pair
06-160Smooth, black, dimpled rubber, pair
06-123Scalloped, black, knurled rubber, each
06-157Engraved, black, dimpled rubber, each
06-153Scalloped, black, dimpled rubber, each
06-161Smooth, black, dimpled rubber, each
55
< SO
FT-TO
UC
H |
FOO
T C
ON
TRO
LS >
|
> Smooth, Dimpled, Chrome
> Engraved,Dimpled, Chrome > Engraved, Dimpled, Black
> Smooth, Dimpled, Black
> Scalloped, Dimpled, Chrome
> Scalloped, Knurled, Black > Scalloped, Knurled, Chrome
> Scalloped, Dimpled, Black
$79.95
$89.95
$89.95
$89.95
$29.95
$34.95
$29.95
$29.95
$79.95
$89.95
$89.95
$89.95
$29.95
$34.95
$29.95
$29.95
56
> Innovative styles complete the look of your bike> Matching shifter pegs and grips available separately> All pegs are machined from 6061-T6 billet aluminum and � nished in chrome or black anodize.> Over 20 styles to choose from.> Matching grips on page 75-76
NESS BILLET FOOTPEGS & SHIFTER / BRAKE PEGS
FOOTPEGS
06-115
06-116
06-472
06-470
06-464
07-484
06-460
06-475
07-474
06-140
Deep Cut Comfort, chrome
Deep Cut Comfort, black
Deep Cut, black
Deep Cut, chrome
Torpedo, chrome
Flamed, black
Flamed, chrome
Diamond Flat-Band, chrome
Horizontal, chrome
Knurled Flare-Tip, chrome
SHIFTER / BRAKE PEG
06-118
06-119
06-473
06-471
06-465
07-485
06-462
06-477
07-475
06-141
Deep Cut Comfort, chrome
Deep Cut Comfort, black
Deep Cut, black
Deep Cut, chrome
Torpedo, chrome
Flamed, black
Flamed, chrome
Diamond Flat-Band, chrome
Horizontal, chrome
Knurled Flare-Tip, chrome
06-309
07-477
Flamed; Diamond Flat-Band; Knurled
Horizontal
REPLACEMENT RUBBERS (FOOT)
REPLACEMENT RUBBERS (SHIFT/BRAKE)
06-400
06-308
06-328
07-476
Torpedo
Flamed; Knurled
Diamond Flat-Band
Horizontal
< BILLET PEG
S | FOO
T CO
NTRO
LS > |
> Deep Cut Comfort, Black
> Deep Cut, Black
> Flamed, Black
> Diamond Flat-Band, Chrome
> Knurled Flare-Tip, Chrome
> Deep Cut Comfort, Chrome
> Deep Cut, Chrome
> Torpedo, Chrome
> Flamed, Chrome
> Horizontal, Chrome
$79.95
$79.95
$139.95
$139.95
$99.95
$139.95
$99.95
$99.95
$79.95
$99.95
$3.95
$12.95
$12.95
$15.95
$29.95
$29.95
$49.95
$49.95
$34.95
$49.95
$36.95
$39.95
$29.95
$39.95
$4.95
$7.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
06-399
06-313
06-311
Ten-Band
Retro
Rocket
BILLET FOOTPEGS & SHIFTER / BRAKE PEGS CONT.FOOTPEGS
SHIFTER / BRAKE PEG
REPLACEMENT RUBBERS (FOOT)
REPLACEMENT RUBBERS (SHIFT/BRAKE)
07-472
07-115
07-482
07-480
07-460
07-466
06-410
06-143
07-490
07-478
07-473
07-116
07-468
07-483
07-481
07-462
06-413
06-144
07-491
07-479
06-398
06-312
06-310
Grooved, black
Grooved, chrome
Battistini Oval, black
Battistini Round, black
Battistini Round, chrome
Battistini Oval, chrome
Knurled, chrome
Ten Band, chrome
Retro, chrome
Rocket, chrome
Grooved, black
Grooved, chrome
Battistini Oval, chrome
Battistini Oval, black
Battistini Round, black
Battistini Round, chrome
Knurled, chrome
Ten Band, chrome
Retro, chrome
Rocket, chrome
Ten-Band
Retro
Rocket
< BI
LLET
PEG
S | F
OO
T C
ON
TRO
LS >
|
57
> Grooved, Chrome
> Battistini Round, Chrome
> Battistini Oval, Black
> Retro, Chrome
> Grooved, Black
> Battistini Round, Black
> Battistini Oval, Chrome
> Ten Band, Chrome> Knurled, Chrome
X: 925.479.6351 >
> Ten Band, Chrome
> Torpedo, Chrome
$8.95
$3.95
$5.95
$15.95
$6.95
$11.95
$139.95
$99.95
$139.95
$139.95
$139.95
$139.95
$99.95
$109.95
$99.95
$99.95
$49.95
$39.95
$54.95
$54.95
$54.95
$54.95
$34.95
$39.95
$39.95
$39.95
58
> Styled to match the Arlen Ness Retro line> Constructed from chrome plated billet aluminum> Full length rubber inserts offer excellent grip and comfort> Designed to FLT 2008-2012 FLT/FLHT/FLHR and 2000-2012 FLST models> Matching passenger boards are designed for 1993-2012 FLT models> Driver � oorboards: 18”L x 6”W x .75”thick > Passenger � oorboards: 7”L x 4”W x .75”thick
ARLEN NESS RETRO FLOORBOARDS
06-842Retro Driver Floorboards, chrome
06-843Retro Passenger Floorboards, chrome
< RETRO
BOA
RDS | FO
OT C
ON
TROLS > |
Under side of Retro Passenger board < 06-843 >
Retro Passenger board < 06-843 >
$449.95
$319.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Cutting-edge design from Arlen Ness> Machined from two pieces of billet aluminum to create an all new see-thru design> A great way to add exceptional style and comfort to your bike> Available in chrome or black anodize � nish> Designed to � t 86-12 FLST, 94-10 FLHR and 08-12 FLT models> Kits include all mounting hardware> Driver � oorboards: 16”L x 5.75”W x 1”thick > Passenger � oorboards: 7”L x 4”W x 1”thick
DEEP CUT FLOORBOARDS FOR BAGGER
DRIVER
PASSENGER
06-838Deep Cut, chrome
06-8371986-2012 FLT Deep Cut, chrome
06-839FLHX/Universal Peg Mount, chrome
06-833Deep Cut, black
06-8311986-2012 FLT Deep Cut, black
06-834FLHX/Universal Peg Mount, black
< D
EEP
CU
T BO
ARD
S | F
OO
T C
ON
TRO
LS >
|
59
> Deep Cut Driver, Chrome
> Deep Cut Driver, Black
> Deep Cut Driver, Black
> Deep Cut Passenger, Chrome
$499.95
$399.95
$399.95
$499.95
$399.95
$399.95
< D
EEP CU
T BOA
RDS | FO
OT C
ON
TROLS > |
60
> Deep Cut Passenger, Black
> Deep Cut Passenger, Chrome> Deep Cut Driver, Black
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Offers exceptional comfort with a great style> Floorboards are approximately 14” long and 5” wide> Kits include: � oorboards, rubber pads, brackets and all necessary mounting hardware> Kits � t: FLST/FLSTF/FLSTN models 1986-up, Road King™ models 1994-up and FLT/FLHT/FLHS models 1980-up
> Matching passenger � oorboards for the Ness/Battistini driver � oorboards> CNC machined from 6061-T6 aluminum and chrome plated > Designed to � t 1980-up FLT models> Direct bolt-on using factory mounting hardware
NESS / BATTISTINI DRIVER FLOORBOARDS
NESS / BATTISTINI PASSENGER FLOORBOARDS
06-818Ness/Battistini Driver Floorboard kit
06-819Ness/Battistini Passenger Floorboard kit
06-812Replacement Rubber kit (42pcs.)
06-813Replacement Rubber kit (18pcs.)
< BA
TTIS
TIN
I BO
ARD
S | F
OO
T C
ON
TRO
LS >
|
69
< BA
TTIS
TIN
I BO
ARD
S B
ATTI
STIN
I BO
ARD
S B
A| F
OO
T C
ON
TRO
LS>
|
69
$499.95
$399.95
$15.95
$9.95
NESS / BATTISTINI DRIVER FLOORBOARDS
NESS / BATTISTINI PASSENGER FLOORBOARDS
< BATTISTIN
I BOA
RDS | FO
OT C
ON
TROLS > |
62
> Replacement driver side � oorboards> Signature Battistini design> Designed to � t 1980-up FLT / Touring models> Available in Black or Chrome � nish> Size: 14” x 5”> Sold in pairs
> Replacement driver side � oorboards> Signature Battistini design> Designed to � t 1986-up FLT / Touring models> Available in Black or Chrome � nish> Size: 18” x 5”> Sold in pairs
> Machined from 6061-T6 billet aluminum> A shorter version of the B2 Semi-Circle design> Rubber pads designed to reduce vibration> Available in Black or Chrome � nish> Sold in pairs
> Designed to � t all 1986-up HD® models > CNC machined from 6061-T6 aluminum> Available in Chrome or Black Anodized � nish
BATTISTINI B2 SHORTBOARD DRIVER FLOORBOARDS
BATTISTINI SEMI-CIRCLE DRIVER FLOORBOARDS
BATTISTINI SEMI-CIRCLE PASSENGER FLOORBOARDS
BATTISTINI SHIFTER RODS
06-9751980-up FLT, black
06-9701986-up FLT, chrome
06-9711986-up FLT, chrome
19-3011986-up, I-Beam, chrome
19-3101986-up, Round Hole, chrome
06-9741980-up FLT, chrome
06-9721986-up FLT, black
06-9731986-up FLT, black
19-3021986-up, I-Beam, black
19-3111986-up, Round Hole, black
> Round Hole, chrome
> Round Hole, black
> I-Beam, chrome
> Battistini Semi-Circle, Driver
> Battistini Semi-Circle, Passenger
> Battistini B2 Shortboards, Driver
> I-Beam, black
> I-Beam, chrome
> I-Beam, black> I-Beam, black
> I-Beam, chrome
$499.95
$519.95
$449.95
$199.95
$199.95
$499.95
$519.95
$449.95
$199.95
$199.95
< SH
IFTE
R RO
DS
| FO
OT
CO
NTR
OLS
> |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Deep Cut Round , black < 19-931 >
> The cleanest shifter rods available period> Designed to work on all HD® models except FXD / FXR / XL > Specially designed spherical bearing pressed in for clean look and no unsightly heim joints> CNC machined from 6061-T6 billet aluminum> Show quality chrome or black anodize � nish
ARLEN NESS SHIFTER RODSNESS SPHERICAL BEARING vs HD CHROME HEIM JOINT
19-930Deep Cut round, chrome
19-914Engraved, chrome
19-912Deep Cut � at, chrome
19-916Holeshot, black
19-931Deep Cut round, black
19-915Engraved, black
19-913Deep Cut � at, black
19-917Holeshot, chrome
63
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
< SH
IFTER ROD
S | FOO
T CO
NTRO
LS > |<
SHIFTER RO
DS
FOO
T CO
NTRO
LS > | SH
IFTER ROD
S | FOO
T CO
NTRO
LS
Deep Cut Round, chrome < 19-930 >
Deep Cut Flat, black < 19-913 >
Deep Cut Flat, chrome < 19-912 >
Deep Cut Round, black < 19-931 >
Hole Shot, black < 19-916 >
Hole Shot, chrome < 19-917 >
Engraved, chrome < 19-914 >
Engraved, black < 19-915 >
ARLEN NESS SHIFTER RODS
64
Deep Cut Flat, chrome < 19-912 >
Deep Cut Flat, black < 19-913 >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Rad II style reservoir is a direct replacement for the factory unit> Die cast aluminum construction> Chrome plated
RAD II MASTER CYLINDER RESERVOIR FOR 99-07 FLT
07-6481999-2007 Master cylinder reservoir
> Kit moves factory � oorboards forward by 2”> Provides extra leg room and comfort for taller riders> Steel relocation brackets utilize factory mounting hardware> Designed to work on 1983-up FLT models> Available in either black powder coat or chrome
NESS 2” FLOORBOARD EXTENSIONS FOR FLT
07-6071983-2008 FLT, chrome
07-6092009-up FLT, chrome
07-6061983-2008 FLT, black
07-6082009-up FLT, black
> Moves factory foot controls 3” forward to increase leg room> Includes: black anodized billet aluminum adapter plates, extended stainless steel rear brake line, extended shifter rod, kickstand spring pin, bracket for 2004-up models and necessary hardware
3” EXTENSIONS FOR SOFTAIL™ CONTROLS
07-6102000-2006 Softail™
07-6162011-2012 Softail™ w/ ABS
07-613Replacement brake line 2007-2012 Softail™
07-6112007-2012 Softail™
07-612Replacement brake line 2000-2006 Softail™
07-617Replacement brake line for 2011-2012 Softail™ w/ ABS
BOARD POSITIONWITH NESS
EXTENSION KIT
STOCK BOARD POSITION
65
< EX
TEN
SIO
N K
ITS
& M
/C
RES
ERVI
OR|
FO
OT
CO
NTR
OLS
> |
$49.95
$169.95
$189.95
$149.95
$169.95
$199.95
$199.95
$79.95
$199.95
$79.95
$79.95
< RETRO
FOO
T CO
NTRO
LS | FOO
T CO
NTRO
LS > |<
RETRO FO
OT C
ON
TROLS | FO
OT C
ON
TROLS >
> Innovative Retro styled forward controls that feature adjustable brake and shift levers> Made for 1984-99 FXST/4-speed Big Twin models and 2000- up Softail™ models> Available in either show quality chrome or rich black anodizing> Black anodized models feature machine cuts for a great contrasting look> See page 71 for matching Ness Retro hand controls
NESS RETRO FORWARD CONTROL KITS
07-6021984-1999 FXST / 4-spd
07-624Kickstand kit for 2007-2012 models
CHROME
ACCESSORIES
BLACK
07-6031984-1999 FXST / 4-spd
07-6413/4” master cylinder rebuild kit
07-6042000-up Softail™ w/ custom kickstand mount
19-910Replacement shift rod
07-6052000-up Softail™ w/ custom kickstand mount
07-601Replacement shift/brake peg ext.
07-600Replacement footpeg mount
NOTE: Kits do not include footpegs or shifter/brake pegs. Order one pair of footpegs and two shift/brake pegs.
RAD II MASTER CYLINDER RESERVOIR FOR 99-07 FLT
NESS 2” FLOORBOARD EXTENSIONS FOR FLT
3” EXTENSIONS FOR SOFTAIL™ CONTROLS
66
$949.95
$99.95
$949.95
$32.95
$949.95
$104.95
$949.95
$14.95
$24.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
08-740
08-741
08-860
08-743
08-750
08-751
08-752
08-755
08-756
08-865
08-737
08-738
08-739
08-877
08-878
08-879
08-745
08-746
08-747
08-748
08-850
08-851
08-852
08-870
08-871
08-872
08-880
08-881
08-882
08-883
9/16” brake m/c (w/ lever)
11/16” brake m/c (w/ lever)
15mm brake m/c (w/ lever)
Cable clutch perch (w/ lever)
Replacement clutch lever
Replacement brake lever
Replacement brake m/c cover
9/16” complete rebuild kit
11/16” complete rebuild kit
15mm complete rebuild kit
Standard switch set, chrome
Switch set w/ radio, chrome
Switch set w/ radio & cruise, chrome
Standard switch set, black
Switch set w/ radio, black
Switch set w/ radio & cruise, black
96-12 FXST, FXD, XL, 9/16”
96-12 FXST, FXD, XL & 96-07 FLT 11/16”
96-07 FLT w/ radio, 11/16”
96-07 FLT w/ radio, cruise, intercom or cruise only 11/16”
08-12 FLT, 15mm
08-12 FLT w/ radio, 15mm
08-12 FLT w/ radio, cruise, intercom or cruise only 15mm
96-12 FXST, FXD, XL, 9/16”
96-12 FXST, FXD, XL & 96-07 FLT 11/16”
96-07 FLT w/ radio, 11/16”
96-07 FLT w/ radio, cruise, intercom or cruise only 11/16”
08-12 FLT, 15mm
08-12 FLT w/ radio, 15mm
08-12 FLT w/ radio, cruise, intercom or cruise only 15mm
RAD III, chrome < 08-850 >
RAD III, chrome < 08-850 >
RAD III, black < 08-881 >
RAD III, chrome < 08-850 >
6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
RAD III, chrome < 08-850 >
RAD III, chrome < 08-850 >
RAD III, chrome < 08-850 >
RAD III, black < 08-881 >
$179.95
$179.95
$179.95
$87.95
$27.95
$27.95
$34.95
$34.95
$34.95
$34.95
$69.95
$69.95
$69.95
$69.95
$69.95
$69.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
$359.95
BLACK
> Arlen Ness presents the industry’s � rst full custom factory replacement hand controls> An evolution of our popular RAD II hand controls, the RAD III controls are guaranteed to give your stock handlebars a great new look> Complete kits include: master cylinder, brake lever, clutch perch, clutch lever and appropriate chrome switch housings (switches not included)> Controls and switch housings accept all factory wires, cables, lines and switches> Available for single or dual disc 1996-2012 models (except hydraulic clutch models); some kits available with cruise/radio functions for models originally equipped with those features> Any of our Arlen Ness mirrors and grips are a great addition to these kits
RAD III HANDLEBAR CONTROL KITS
CHROME
ACCESSORIES
< RA
D II
I HA
DN
LEBA
R C
ON
TRO
LS |
HA
ND
CO
NTR
OLS
> |
69
RAD III, black < 08-870 > shown w/ RAD II micro-mirrors < 13-401 >
RAD III, black < 08-870 >
RAD III, chrome < 08-743 >
< RA
D III H
AD
NLEBA
R CO
NTRO
LS | HA
ND
CO
NTRO
LS > |
70
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
08-724
08-725
08-709
08-730
08-731
08-717
08-707
08-713
08-704
08-711
08-620
08-622
06-659
06-625
08-621
08-732
08-733
9/16” brake m/c, chrome
11/16” brake m/c, chrome
11/16” hyd. brake m/c, chrome
9/16” brake m/c, black
11/16” brake m/c, black
11/16” hyd. brake m/c, black
Retro cable clutch perch, chrome
Retro cable clutch perch, black
3-button switch block, chrome, ea.
3-button switch block, black, ea.
9/16” m/c rebuild kit
11/16” m/c rebuild kit
11/16” hyd. clutch rebuild kit
Potted switch w/ 30” wire leads
Button, each
Clutch lever, chrome
Clutch lever, black
|
Retro control kit, chrome < 08-720 >Retro control kit, black < 08-728 >
$444.95
$444.95
$415.95
$415.95
$415.95
$415.95
$292.95
$292.95
$164.95
$164.95
$39.95
$39.95
$59.95
$29.95
$6.95
$99.95
$109.95
$699.95
$875.95
$699.95
$699.95
$833.95
$875.95
$699.95
$833.95
> Innovative Retro styling with modern day technology> All components machined from 6061-T6 billet aluminum> 9/16” and 11/16” size master cylinders available> Hydraulic clutch kits feature an 11/16” clutch master cylinder for easy effort and great feel at the lever> Three button switch blocks are available and can be used on either the brake or clutch side control> Available in chrome or black anodize � nish> See page 66 for matching Ness Retro Foot Controls
RETRO HANDLEBAR CONTROL KITS
08-7209/16” master cylinder, Cable Clutch
08-72311/16” master cylinder, Hydraulic Clutch
08-72111/16” master cylinder, Cable Clutch
08-7269/16” master cylinder, Cable Clutch
08-7289/16” master cylinder, Hydraulic Clutch
08-7229/16” master cylinder, Hydraulic Clutch
08-72711/16” master cylinder, Cable Clutch
08-72911/16” master cylinder, Hydraulic Clutch
CHROME
BLACK
ACCESSORIES
< RE
TRO
HA
ND
LEBA
R C
ON
TRO
LS |
HA
ND
CO
NTR
OLS
> |
71
Deep Cut Comfort, black < 07-051 >
Deep Cut Comfort, chrome < 07-052 >
Deep Cut Comfort, black < 07-051 >
Deep Cut Comfort, chrome < 07-052 >
$99.95
$99.95
$99.95
$99.95
> The perfect blend of form and function> Conical billet grip bodies are machined to perfection and finished in chrome and black anodized finishes > Innovative rubber inserts have a soft air cushion feel that dampens vibration for a comfortable ride. The grips have a slightly larger diameter than stock, which helps with carpal tunnel and hand fatigue during long rides. > Matches our popular Deep Cut line of accessories: Billet Floorboards, Heel/Toe Shifters, Brake Arms, Covers, Exhaust Tips, Speaker Grills, Wheels, Fork Legs, Fork Boots, Saddlebag Latches, and more
RETRO HANDLEBAR CONTROL KITS DEEP CUT COMFORT SERIES GRIP
07-050Cable style, comfort
07-052Fly-By-Wire style, comfort
07-051Cable style, comfort
07-053Fly-By-Wire style, comfort
CHROME
BLACK
< D
EEP CU
T CO
MFO
RT SERIES GRIPS | H
AN
D C
ON
TROLS > |
72
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> The perfect fusion of grip, style and comfort > Each rubber grip design features excellent traction for your hands to take full control of your motorcycle> All of our billet aluminum accents are intricately machined into pieces of art and later � nished in � awless chrome or black anodizing> DC, Port Hole and Smooth designs feature 1-1/4” billet aluminum inner collars, diamond knurled rubber grips and billet aluminum end caps> Slot Track design features 1-1/4” billet aluminum inner collars with an air cushion rubber thumb pad, linear knurled rubber grips and slotted billet aluminum endcaps> Diamond Knurled Rubber design features diamond knurled grips with integrated billet end caps for a clean design> Ring Leader design features a linear knurled rubber grip with integrated air pillows for extreme comfort. Collars, rings and end caps are machined from billet aluminum for an excellent look> All kits include an installed throttle sleeve, grip glue and simple to follow instructions > Styles available in chrome or black anodize � nishes for cable or Fly by Wire applications > Matching footpegs and shifter pegs are available separately. See pg. 53-54
NESS FUSION SERIES GRIPS
CABLE STYLE
FLY-BY WIRE
07-316
07-317
07-324
07-325
07-320
07-321
07-312
07-313
07-305
07-300
07-301
07-318
07-319
07-326
07-327
07-322
07-323
07-314
07-315
07-307
07-302
07-303
Deep Cut, chrome
Deep Cut, black
Knurled, chrome
Knurled, black
Smooth, chrome
Smooth, black
Ring Leader, chrome
Ring Leader, black
Port Hole, black
Slot Track, chrome
Slot Track, black
Deep Cut, chrome
Deep Cut, black
Knurled, chrome
Knurled, black
Smooth, chrome
Smooth, black
Ring Leader, chrome
Ring Leader, black
Port Hole, black
Slot Track, chrome
Slot Track, black
VD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA
> Slot Track, black
> Slot Track, chrome
> Ring Leader, chrome
> Ring Leader, black
$89.95
$89.95
$49.95
$49.95
$59.95
$59.95
$69.95
$69.95
$79.95
$89.95
$89.95
$89.95
$89.95
$49.95
$49.95
$59.95
$59.95
$69.95
$69.95
$79.95
$89.95
$89.95
< FU
SIO
N S
ERIE
S G
RIPS
| H
AN
D C
ON
TRO
LS >
|
73
> Smooth, chrome
> Knurled Fusion, chrome
> Deep Cut Fusion, chrome> Deep Cut Fusion, black
> Knurled Fusion, black
> Smooth, black
> Port Hole, black
< FU
SION
SERIES GRIPS | H
AN
D C
ON
TROLS > |
74
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Arlen Ness was the � rst billet grip manufacturer in the motorcycle industry> Our cable designs feature our exclusive internal roller bearing that eliminates any free play for smooth throttle control > Cable Style design � ts 1976-Up Harley® models (except 2008-Up FLT models)> Our Throttle-By Wire models are a direct replacement for 2008-Up FLT models> All of our billet grip designs are machined from 6061-T6 billet aluminum in chrome or black anodized � nish> Sold in pairs
NESS BILLET GRIPS
CABLE STYLE
FLY-BY WIRE
REPLACEMENT RUBBER
07-130
07-132
07-103
07-142
07-147
07-107
07-133
07-109
07-102
07-134
07-145
07-111
07-138
07-146
07-141
07-149
07-242
07-244
07-241
07-230
07-233
07-235
07-110
07-113
Deep Cut, chrome
Deep Cut, black
Flamed, chrome
Flamed, black
Grooved, black
Grooved, chrome
Horizontal
Knurled Flare-Tip
Knurled
Torpedo
Retro
Flatband
Battistini Round, chrome
Battistini Round, black
Battistini Oval, chrome
Battistini Oval, black
Deep Cut, chrome
Deep Cut, black
Flamed, black
Horizontal
Battistini Round, chrome
Battistini Round, black
Knurled; Flatband
Retro
CABLE STYLE
FLY-BY-WIRE
> Flamed,black
> Flamed, chrome
> Deep Cut, chrome
> Deep Cut,black$159.95
$159.95
$129.95
$139.95
$139.95
$129.95
$79.95
$129.95
$129.95
$109.95
$129.95
$129.95
$149.95
$149.95
$149.95
$149.95
$159.95
$159.95
$139.95
$99.95
$149.95
$149.95
$9.95
$7.95
< N
ESS
BILL
ET G
RIPS
| H
AN
D C
ON
TRO
LS >
|
75
NESS BILLET GRIPS
> Knurled Flare-Tip, chrome> Knurled, chrome
> Horizontal, chrome
> Battistini Oval, black> Battistini Round, black > Battistini Round, chrome
> Flatband, chrome> Retro, chrome
> Grooved,black> Grooved,black
> Horizontal, chrome > Retro, chrome > Flatband, chrome
> Knurled Flare-Tip, chrome
> Battistini Round, black > Battistini Round, chrome > Battistini Oval, black
> Grooved, chrome
> Knurled, chrome
> Battistini Oval, chrome> Battistini Oval, chrome
> Torpedo, chrome
< N
ESS BILLET GRIPS | H
AN
D C
ON
TROLS > |
76
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Our billet and rubber Soft-Touch Series grips add style, comfort, and excellent grip. These grips are made in the USA from the � nest materials available such as Kraton rubber and machined 6061-T6 billet aluminum. Throttle sleeve is included with each grip set for cable or � y-by wire applications. Matching foot pegs and shifter pegs are also available. See pg. 55
2008-2012 FLT
1976-2012 BIG-TWIN / XL
07-072Scalloped, chrome, knurled rubber, pair
07-087Engraved, chrome, dimpled rubber, pair
07-083Scalloped, chrome, dimpled rubber, pair
07-091Smooth, chrome, dimpled rubber, pair
07-070Scalloped, chrome, knurled rubber, each
07-086Engraved, chrome, dimpled rubber, each
07-082Scalloped, chrome, dimpled rubber, each
07-090Smooth, chrome, dimpled rubber, each
07-073Scalloped, black, knurled rubber, pair
07-089Engraved, black, dimpled rubber, pair
07-085Scalloped, black, dimpled rubber, pair
07-093Smooth, black, dimpled rubber, pair
07-071Scalloped, black, knurled rubber, each
07-088Engraved, black, dimpled rubber, each
07-084Scalloped, black, dimpled rubber, each
07-092Smooth, black, dimpled rubber, each
SOFT-TOUCH GRIPS
6061-T6 billet aluminum. Throttle sleeve is included with each grip set for cable or � y-by wire applications. Matching foot pegs and shifter pegs are also available. See pg.
SOFT-TOUCH GRIPS
> Smooth, chrome > Smooth, black> Smooth, chrome
07-083Scalloped, chrome, dimpled rubber, pair
> Smooth, black
07-087Engraved, chrome, dimpled rubber, pair
> Engraved, black> Engraved, chrome> Engraved, chrome> Engraved, chrome> Engraved, chrome
07-093Smooth, black, dimpled rubber, pair
> Engraved, black> Engraved, black
Scalloped, chrome, knurled rubber, each
07-071
> Scalloped, black> Scalloped, chrome
07-086Engraved, chrome, dimpled rubber, each
Scalloped, black, dimpled rubber, each
07-090
Engraved, black, dimpled rubber, each
> Scalloped, chrome> Scalloped, chrome
> Scalloped, knurled, black> Scalloped, knurled, chrome
$59.95
$69.95
$59.95
$59.95
$59.95
$69.95
$59.95
$59.95
$59.95
$69.95
$59.95
$59.95
$59.95
$69.95
$59.95
$59.95
< SO
FT T
OU
CH
GRI
PS |
HA
ND
CO
NTR
OLS
> |
77
NOTE: Requires cutting 1/2” from right side of handlebar. Fits 1976-2012 models (except � y-by wire)
Coned throttle housing < 20-298 >
Switch style housing < 20-287 >
Grooved “False” housing < 20-278 >
Roller throttle bearing < 07-099 >Roller throttle bearing < 07-099 >
Switch style housing < 20-287 >
> Designed to accept 1982-95 single throttle cable assemblies for your custom applications> Made from durable die cast zinc> Chrome � nish
DIE-CAST THROTTLE HOUSINGSOFT-TOUCH GRIPS
20-298Coned throttle housing, chrome
> For use on the handlebar’s left side> Balances the look of your bike’s hand controls> Available in grooved or radius design> Chrome billet housings are available with petite switch
BILLET LEFT SIDE FALSE HOUSING
20-278Grooved false housing w/ switch
20-275Radius false housing w/ switch
> Turning your throttle has never been easier or smoother> Design allows your factory throttle tube to ride on a roller bearing instaead of dragging on your handlebar
ROLLER THROTTLE BEARING FOR OEM GRIPS
07-099Roller bearing kit
> Perfect compliment to our billet hand controls and grips> Available in radius designs with or without petite switch> CNC machined from 6061-T6 billet aluminum> Available in single throttle cable applications> Chrome � nish> Designed for 1982-95 throttle cable applications
BILLET THROTTLE HOUSING
20-283Single cable housing, Radius
20-297Switch style, single cable housing, Grooved
20-287Switch style, single cable housing, Radius
$36.95
$79.95
$79.95
$24.95
$59.95
$89.95
$89.95
< TH
ROTTLE H
OU
SING
S | HA
ND
CO
NTRO
LS > |
78
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Design, function and adjustability> Our innovative 1-1/4” steel handlebars feature billet aluminum junction clamps that rotate towards or away from the rider for their desired comfort needs. > All bars are drilled and slotted for internal wiring for cable or FBW applications> Drag bars bolt-on directly to 3-1/2” bolt centers for most all HD models (except Bagger models)> Bagger Apes and Mini Apes include 3-1/2” on center knurling to � t most HD applications> Available in chrome and black for most HD models
CHROME
BLACK
08-97013” Bagger Apes for FLHT, FLHX, chrome
08-9758” Modular Drag Bars, chrome
08-97612” Modular Drag Bars, chrome
08-96210” Mini Apes for ALL Dyna™, XL & Softail™ (except FXSTS, FLSTS, FXS, Road Glide & Roadking models ) black
08-97210” Mini Apes for ALL Dyna™, XL & Softail™ (except FXSTS, FLSTS, FXS, Road Glide & Roadking models ) chrome
08-96013” Bagger Apes for FLHT, FLHX, black
08-9658” Modular Drag Bars, black
08-96612” Modular Drag Bars, black
NESS MODULAR HANDLEBARS (PATENT PENDING)
08-9658” Modular Drag Bars, black
8” Modular Modular Drag Bars, black < 08-965 >
10” Modular Mini-Apes, black < 08-962 >
12” Modular Drag Bars, black < 08-966 >
13” Modular Bagger Apes, black < 08-960 >
NESS MODULAR HANDLE BAR DIMENSIONS
P/N CENTER WIDTH WIDTH RISE PULLBACK DIAMETER
08-96008-97608-97208-97508-97008-96608-96208-965
15”3-1/2”
10”3-1/2”
15”3-1/2”
10”3-1/2”
36”26”35”25”36”26”35”25”
13”12”10”8”
13”12”10”8”
8”8”5”5”8”8”5”5”
1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”
$499.95
$499.95
$499.95
$499.95
$459.95
$459.95
$399.95
$399.95
< M
OD
ULA
R H
AN
DLE
BARS
| H
AN
D C
ON
TRO
LS >
|
79
NESS MODULAR HANDLEBARS (PATENT PENDING)
8” Modular Drag Bars, chrome < 08-975 >
10” Modular Mini-Apes, chrome < 08-972 >
12” Modular Drag Bars, chrome < 08-976 >
13” Modular Bagger Apes, chrome < 08-970 >
DIAMETER
< M
OD
ULA
R HA
ND
LEBARS | H
AN
D C
ON
TROLS > |
80
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BL
> Brought back by popular demand.> Looks and feels great!
> Curvaceous styling> Looks great on any application> Nice � owing transition from triple trees to hand controls
> These are the famous Ness-Drag Bars> Available in 1”
> This original design from Arlen Ness™ featuring unique V styling> Available in 1-1/4” diameter for that stylish fat-look> Works great on FXST, FXR and Dyna Glide™ models
> These are a re-make of the � rst product Arlen ever made in 1970> Smooth curvaceous bends> Excellent comfort
08-021Fly-Bars with indents
08-006Fat-Bob Drag bars with indents
08-034V-Drag bars with internal wiring holes
08-033Ram-Hi with indents
08-032Ram-Lo with indents
08-022Lowrider with indents
NESS 1-1/4” FLY BARS
FAT-BOB LATE STYLE DRAG BARS
NESS V-DRAG BARS
NESS 1-1/4” RAM BARS
NESS 1-1/4” LOWRIDER BARS
DIMENSIONS: center width: N/A, w: 29-1/2”, rise: 12”, pull: 12-1/4”, diameter 1-1/4”
DIMENSIONS: center width: 5”, w: 25-1/4”, rise: 8-1/2”, pull: 10-1/2”, diameter 1”
DIMENSIONS: center width: N/A, w: 36-1/4”, rise: 7-1/2”, pull: 12”, diameter 1-1/4”
DIMENSIONS: center width: N/A, w: 30-1/4”, rise: 12-1/2”, pull: 10-1/4”, diameter 1-1/4”
DIMENSIONS: center width: N/A, w: 30-1/4”, rise: 10-3/4”, pull: 11-1/2”, diameter 1-1/4”
DIMENSIONS: center width: N/A, w: 29-1/2”, rise: 12”, pull: 12-1/4”, diameter 1-1/4”
> Fly-Bar
> Lowrider Bar
> Ram-Bar
> Fat-Bob Drag Bar
> V-Drag Bar
$234.95
$169.95
$209.95
$234.95
$234.95
$234.95
81
< H
AN
DLE
BARS
| H
AN
D C
ON
TRO
LS >
|
< H
AN
DLEBA
RS | HA
ND
CO
NTRO
LS > |
> Constructed from either 1” or 1-1/4” DOM steel tubing> Not for use with Fly-By-Wire applications> 1-1/4” Bars feature 1” grip ends allowing clearance for all system controls> Show chrome � nish> Models with built-in risers require Ness < 01-471 > bolt kit
1-1/4” BARS
1” BARS
08-0411-1/4” Dresser for 1-1/4” clamp
08-0161” Flat Track with indents
08-0471-1/4” Flat Track for FXSTS, FLSTS
08-0441-1/4” Drag Bar for 1-1/4” clamp
08-0271” Ape Hanger with built in risers
ARLEN NESS HANDLE BARS
1-1/4” WITH BUILT-IN RISERS: Feature 1-1/4” fat tubing with 1” long built-in risers. These bars bolt directly to your top triple tree and are drilled for internal wiring.
1” WITH BUILT-IN RISERS: Feature 1” tubing with 1” long built-in risers. These bars bolt directly to your top tree and are drilled for internal wiring.
1” WITH INDENTS: These bars can be used on most 1982-2012 applications
> 1-1/4” Fly-Bar installed
< 08-041 >
< 08-047 >
< 08-016 >
ARLEN NESS HANDLEBAR DIMENSIONS
P/N CENTER WIDTH WIDTH RISE PULLBACK DIAMETER
08-01608-02708-04108-04408-04708-02108-02208-03308-03208-00608-034
5-1/2”5”11”
7-1/2”11”--------------------5”-----
29-1/4”33”
35-3/4”31”
37-1/2”29-1/2”29-1/2”30-1/4”30-1/4”25-1/4”36-1/4”
4-1/2”19”
6-1/2”-----4”12”12”
12-1/2”10-3/4”8-1/2”7-1/2”
8”8”10”6”8”
12-1/4”12-1/4”10-1/4”11-1/2”10-1/2”
12”
1”1”
1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”
1”1-1/4”
$139.95
$89.95
$129.95
$89.95
$139.95
$139.95
$129.95
$89.95
< 08-016 >
Feature 1-1/4” fat tubing with 1” long built-in risers. These bars bolt directly to your top
Feature 1” tubing with 1” long built-in risers. These bars bolt directly to your top tree and
82
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Radius Billet Clamps
Damper kit < 08-004 >
Damper kit < 08-005 >
> Grooved Billet Clamps
Damper kit < 08-005 >
Damper kit < 08-004 >
> Kit is a must when installing Ape Hanger bars on a Bagger> Our polyurethane bushings add a more positive feel to the
handlebars while limiting vibrations> Our heavy duty chrome cup washers will not bend or distort
like factory units> Kit includes polyurethane bushings, inner sleeves and heavy
duty chrome cup washers> 1984-2012 FLT & FLHT models
> These polyurethane bushings add a more positive feel to the handlebars while limiting vibrations especially when using tall handlebars
> Our heavy duty chrome cup washers will not bend or distort like factory units
> Kit includes polyurethane bushings, inner sleeves and heavy duty chrome cup washers
> 1973 & up Softail™, FX, FXR, Dyna™ & XL Models (except 04-10 XL, Springer Deuce models) Also � ts most custom triple tree applications
> The cleanest way to mount your handlebars on your stock or custom triple tree application> The cup washers provided in this kit are machined from 303 stainless steel and polished to a chrome-like � nish> Flush mount lower cup washer conceals the provided hardware for a superior look > Our USA made polyurethane bushings eliminate � exing and isolate vibration> These kits include two lower � ush mount cup washers, two heavy wall top cup washers, four custom polyurethane bushings, two inner sleeves & � ne or coarse allen hardware> 1973 & up Softail™, FX, FXR, Dyna™ & XL Models (except 04-10 XL, Springer Deuce models) Also � ts most custom triple tree applications
HANDLEBAR DAMPER KIT FOR BAGGER
HANDLEBAR DAMPER KIT FOR FX, DYNA™ & XL
FLUSH MOUNT HANDLEBAR DAMPENING KIT
BILLET CABLE CLAMPS FOR V-TWIN
RADIUS CLAMPS
GROOVED CLAMPS
08-029Ness Damper kit for Baggers
08-005Ness Damper kit for FX, Dyna™ & XL models
08-004Flush mount kit, � ne thead
03-164 1-1/2” to clutch (all Dyna™ models)
03-163 1-1/4” to throttle
03-161 1-3/8” to clutch
03-162 1-1/4” to dual throttle
03-165 1” to clutch
03-166 1-1/” to clutch
03-167 1-1/4” to clutch
03-169 1” to dual throttle
03-171 1-3/8” to clutch
03-172 1-1/4” to dual throttle
03-175 1” to clutch
03-176 1-1/8” to clutch
03-177 1-1/4” to clutch
03-179 1” to dual throttle
03-178 1” to throttle
08-002Flush mount kit, coarse thead
03-168 1” to throttle
03-174 1-1/2” to clutch (all Dyna™ models)
03-173 1-1/4” to throttle
Damper kit < 08-029 >
$24.95
$24.95
$24.95
$24.95
$24.95$24.95
$24.95
$24.95
$24.95
$24.95
$24.95$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$29.95
$29.95
$49.95
$49.95
< C
ABL
E C
LAM
PS |
HA
ND
CO
NTR
OLS
> |
83
HANDLEBAR DAMPER KIT FOR BAGGER
HANDLEBAR DAMPER KIT FOR FX, DYNA™ & XL
FLUSH MOUNT HANDLEBAR DAMPENING KIT
BILLET CABLE CLAMPS FOR V-TWIN
RADIUS CLAMPS
GROOVED CLAMPS
Cross Die-Cast Stem < GLASS SIZE > 3” W X 3” H3” W X 3” H
Sling-Shot, Smooth< GLASS SIZE > 4 3/4” W X 2” H
Pocket Turbo, Smooth< GLASS SIZE > 4 1/2” W X 2” H
Pocket-Turbo, Grooved< GLASS SIZE > 4 1/2” W X 2” H
Stealth Long-Stem< GLASS SIZE > 5” W X 2 1/2” H
Stealth Short-Stem< GLASS SIZE > 5” W X 2 1/2” H
Oval Stepped< GLASS SIZE > 5” W X 2 1/2” H
3D Cateye < GLASS SIZE > 4 1/4” W X 2 1/8” H
Vision™ < GLASS SIZE > 4 1/4” W X 2 1/8” H
Cat-Eye Soft-Bend, Grooved< GLASS SIZE > 4 1/4” W X 2 1/4” H
Sling-Shot, Grooved < GLASS SIZE > 4 3/4” W X 2” H
Cat-Eye Soft-Bend, Smooth < GLASS SIZE > 4 1/4” W X 2 1/4” H
> Stylish designs for your custom application> Chrome plated � nish> All styles feature convex glass> Each mirror includes hardware for Harley and Cruiser models
NESS CHROME MIRRORS
LEFTSTYLE RIGHT EA.
13-050
13-058
13-053
13-044
13-040
13-045
13-046
13-030
13-033
13-100
13-068
13-035
13-043
13-050
13-058
13-053
13-044
13-040
13-045
13-046
13-031
13-034
13-100
13-069
13-036
13-043
Vision™
Stealth, Long-Stem
Stealth, Short-Stem
Oval Stepped
Slingshot Grooved
Cat-Eye Softbend, Smooth
Cat-Eye Softbend, Grooved
Pocket Turbo, Grooved
Pocket Turbo, Smooth
Cross
3D Cat-Eye
Teardrop
Slingshot, Smooth
NOTE: Some mirrors not designed to � t both sides of the handlebar. All sold individually.
Teardrop< GLASS SIZE > 4 1/4” W X 2 1/8” H
$49.95
$31.95
$28.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$34.95
$49.95
$30.95
$49.95
$24.95
$24.95
< N
ESS MIRRO
RS | HA
ND
CO
NTRO
LS > |
84
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Stylish designs for your custom application> Chrome plated or black powder � nish> All styles feature convex glass> Mirrors sold individually> Each mirror includes hardware for Harley and Cruiser models
NESS MICRO- MIRRORS
LEFT
LEFT
CHROME
BLACK
RIGHT
RIGHT
EA.
EA.
13-070
13-060
13-406
13-416
13-408
13-410
13-087
13-028
13-412
13-418
13-404
13-400
13-071
13-061
13-407
13-417
13-409
13-411
13-088
13-029
13-413
13-419
13-405
13-401
Flamed
Scoop
Mini-Oval
Four Point
Upswept
RAD II
Flamed
Scoop
Mini-Oval
Four Point
Upswept
RAD II
Upswept, black< GLASS SIZE > 4-1/2” W X 1-1/2” H
Upswept, chrome< GLASS SIZE > 4-1/2” W X 1-1/2” H
Four Point, black<GLASS SIZE > 3-3/4” W X 1-1/2” H
Four Point, chrome<GLASS SIZE > 3-3/4” W X 1-1/2” H
RAD II, black < GLASS SIZE > 4-1/2” W X 1-1/2” H
RAD II, chrome< GLASS SIZE > 4-1/2” W X 1-1/2” H
Scoop, black< GLASS SIZE > 4 -1/2” W X 1-1/2” H
Scoop, chrome< GLASS SIZE > 4 -1/2” W X 1-1/2” H
Flamed, black < GLASS SIZE > 4” W X 1-3/4” H
Flamed, chrome< GLASS SIZE > 4” W X 1-3/4” H
Mini Oval, black< GLASS SIZE > 4-1/2” W X 1-1/2” H
Mini Oval, chrome< GLASS SIZE > 4-1/2” W X 1-1/2” H
Flamed, black Upswept, chrome
Mini Oval, chrome
$52.95
$49.95
$49.95
$49.95
$49.95
$49.95
$52.95
$49.95
$49.95
$49.95
$49.95
$49.95
< N
ESS
MIR
RORS
| H
AN
D C
ON
TRO
LS >
|
85
NESS MICRO- MIRRORS
> Maximum style and visiblity> Chrome plated or black powder � nish > Choose between cast or steel stem, all styles feature convex glass> Each mirror includes hardware for Harley and Cruiser models> Mirrors sold individually
LEFT
LEFT
CHROME
BLACK
RIGHT
RIGHT
EA.
EA.
13-090
13-072
13-092
13-082
13-091
13-073
13-093
13-083
RAD III, Cast
RAD III, Steel
RAD III, Cast
RAD III, Steel
> Small, stylish designs for your Bagger> Black powder coated, die-cast design> Integrated design cleans up the look of the stock Bagger> Direct replacement on 2006-2012 FLHX and easily � t on other Bagger models with fairing> Sold in pairs
NESS MICRO-MIRRORS FOR BAGGER
13-420RAD II Bagger Mirrors
13-421Mini-Oval Bagger Mirrors
Scoop, black< GLASS SIZE > 4 -1/2” W X 1-1/2” H
Scoop, chrome< GLASS SIZE > 4 -1/2” W X 1-1/2” H
Flamed, chrome< GLASS SIZE > 4” W X 1-3/4” H
SIZE SCALE: FIG.1 RAD III FIG.2 RAD II
RAD III Steel Black< GLASS SIZE > 7” W X 3” H
RAD II< GLASS SIZE > 4-1/2” W X 1-1/2” H
Mini-Oval< GLASS SIZE > 4-1/2” W X 1-1/2” H
RAD III, Steel Stem
< GLASS SIZE > 7” W X 3” H
RAD III Cast, Black< GLASS SIZE > 7” W X 3” H
RAD III Cast, Chrome < GLASS SIZE > 7” W X 3” H
RAD III Steel Black< GLASS SIZE > 7” W X 3” H
RAD III Cast, Black< GLASS SIZE > 7” W X 3” H
$69.95
$49.95
$69.95
$49.95
$89.95
$89.95
< N
ESS MIRRO
RS | HA
ND
CO
NTRO
LS > |
86
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
89
< BI
G-S
UC
KER™
AIR
CLE
AN
ER K
IT |
UP
TO 2
1% M
ORE
HO
RSE >
|
90
< BIG
-SUC
KER™ A
IR CLEA
NER KIT | U
P TO 21%
MO
RE HO
RSE > |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< ST
AGE
I BIG
SU
CKE
R | M
OTO
RS &
EXH
AU
ST >
|
91
Standard Filter / Plain Backing Plate
SportSter™For oeM CoVer
Standard Filter w/ Stock HD® cover cut-away
Standard Filter w/ Stock HD® cover cut-away
Stainless Filter w/ Stock HD® cover cut-away
2008-12 FLt MoDeLS
99-12 tWIN-CAM(eXC. 99-01 FI FLt &
08-12 FLt)93-99
eVoLUtIoN1999-2001
FI FLt1988-2012
XL
08-12FXD,
oeM CoVer
88-12XL,
oeM CoVer
Standard Filter / Plain Backing Plate 18-510 18-557 18-505 18-827* 18-500 18-498 18-803 18-824*Standard Filter / Ch Backing Plate 18-512 ----- 18-507 18-828* 18-501 18-503 18-822 18-825*Standard Filter / Black Backing Plate 18-560 18-526 18-561 18-829* 18-562 18-563 18-564 18-826*Stainless Filter / Ch Backing Plate 18-514 ----- 18-515 ----- 18-516 18-517 18-518 -----Stainless Filter / Black Backing Plate 18-570 18-528 18-571 ----- 18-572 18-573 18-574 -----
Scalloped Billet Cover, Chrome 18-781 18-781 18-781 ----- 18-781 18-781 18-781 -----Scalloped Billet Cover, Black 18-787 18-787 18-787 ----- 18-787 18-787 18-787 -----Smooth Billet Cover, Chrome 18-780 18-780 18-780 ----- 18-780 18-780 18-780 -----Steel, Smooth Cover, Chrome 18-760 18-760 18-760 ----- 18-760 18-760 18-760 -----Steel, Smooth Cover, Black 18-761 18-761 18-761 ----- 18-761 18-761 18-761 -----Stage I Pre-Filter 18-060 18-060 18-060 18-060 18-060 18-060 18-060 18-060SS Sucker Re-Charge kit 18-075 18-075 18-075 ----- 18-075 18-075 18-075 -----Big Sucker Re-Charge kit 18-076 18-076 18-076 18-076 18-076 18-076 18-076 18-076Replacement Backing Plate, Plain 18-580 18-595 18-581 ----- 18-581 18-582 18-584 -----Replacement Backing Plate, Black 18-590 18-596 18-591 ----- 18-592 18-593 18-594 -----Replacement Hardware kit 18-530 18-530 18-531 ----- 18-532 18-533 18-534 -----Replacement Gasket kit 18-535 ----- 18-536 ----- 18-536 18-537 18-538 -----Replacement SS Filter 18-083 18-083 18-084 ----- 18-084 18-087 18-084 -----Replacement Big Sucker Filter 18-080 18-080 18-098 18-041 18-098 18-097 18-098 18-040Replacement Backing Plate, Chrome 18-585 ----- 18-586 18-586 18-587 18-588 18-589 18-589
2008-12 FLt58MM
tHrottLe BoDY
StAGe I ACCeSSorIeS
BIG SUCKer™ StAGe I AIr FILter KItS
BIG SUCKER™ STAGE I AIR FILTER KITS
> Features a one-piece aluminum backing plate/carb support bracket > Eliminates the need for banjo fi ttings, hoses, and clamps > Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system> Pre-oiled fi lter element available in red or stainless jacketed styles > Backing plates available in standard, chrome, or black fi nish > All necessary hardware and instructions included
* Designed to use stock OEM outer cover ONLY.
$129.95$149.95$149.95$169.95$169.95
$119.95$119.95$119.95$49.95$49.95$49.95$15.95$15.95$49.95$59.95$34.95$6.49
$69.95$49.95$59.95
Stainless Filter / Black Backing Plate / Scalloped, Black Cover
Stainless Filter / Chrome Backing Plate / Scalloped, Chrome Cover
Standard Filter / Chrome Backing Plate / Smooth, Chrome Cover
Stainless Filter / Chrome Backing Plate / Smooth, Chrome Cover
SportSter™
< STAG
E I BIG SU
CKER | M
OTO
RS & EXH
AU
ST > |
92
Scalloped Billet Cover, Chrome 18-781 18-781 18-781 18-781 18-781 18-781Scalloped Billet Cover, Black 18-787 18-787 18-787 18-787 18-787 18-787Smooth Billet Cover, Chrome 18-780 18-780 18-780 18-780 18-780 18-780Stage I Pre-Filter (Rain Sock) 18-060 18-060 18-060 18-060 18-060 18-060
Stage I, Steel Cover, Smooth, Chrome 18-320 ----- 18-321 18-322 18-323 18-324Stage I, Steel Cover, Smooth, Black 18-325 ----- 18-326 18-327 18-328 18-329SS Stage I, Steel Cover, Smooth, Chrome 18-330 18-390 18-331 18-332 18-333 18-334SS Stage I, Steel Cover, Smooth, Black 18-335 18-391 18-336 18-337 18-338 18-339Stage I, Smooth, Chrome 18-813 ----- 18-808 18-791 ----- 18-833Stage I, Scalloped, Chrome 18-815 ----- 18-809 18-792 ----- 18-834Stage I, Scalloped, Black 18-835 ----- 18-836 18-837 ----- 18-839SS Stage I, Smooth, Chrome 18-850 ----- 18-851 18-852 ----- 18-853SS Stage I, Scalloped, Chrome 18-859 ----- 18-860 18-861 ----- 18-862SS Stage I, Scalloped, Black 18-863 ----- 18-864 18-865 ----- 18-866
BILLET SUCKER™ STAGE I AIR FILTER KITS
> These high performance air filter kits feature an exposed air filter with a billet outer cover for great style and performance> Available with a standard red air filter or our SS stainless steel jacketed air filter > Optional pre-filter (rain sock) is available separately> Replacement Stage I parts are available on the previous page
2008-12 FLt MoDeLS
1993-1999eVo. CArB
1999-2001 FUeL INJeCteD FLt 1988-2012 XL
2000-12 tWINCAM (eX. 99-01 FI FLt
& 08-11 FLt)
2008-12 FLt58MM
tHrottLe BoDY
StAGe I ACCeSSorIeS
BILLet SUCKer™ StAGe I AIr FILter KItS
$159.95$159.95$179.95$179.95$214.95$214.95$214.95$234.95$234.95$234.95
$119.95$119.95$119.95$39.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Standard Filter / Chrome Backing PlateStainless Filter / Chrome Backing Plate
< ST
AGE
II BI
G S
UC
KER | M
OTO
RS &
EXH
AU
ST >
|
93
Standard Filter / Plain Backing Plate 18-511 18-558 18-506 18-499 18-493 18-804Standard Filter / Chrome Backing Plate 18-513 ----- 18-508 18-502 18-504 18-823Standard Filter / Black Backing Plate 18-565 18-527 18-566 18-567 18-568 18-569Stainless Filter / Chrome Backing Plate 18-519 ----- 18-520 18-521 18-522 18-523Stainless Filter / Black Backing Plate 18-575 18-529 18-576 18-577 18-578 18-579
Backing Plate Only, Plain 18-580 ----- 18-581 18-582 18-583 18-584Backing Plate Only, Chrome 18-585 ----- 18-586 18-587 18-588 18-589Backing Plate Only, Black 18-590 ----- 18-591 18-592 18-593 18-594 Hardware Kit, Stage II 18-539 ----- 18-539 18-541 18-542 18-543Gasket Kit 18-535 ----- 18-536 18-536 18-537 18-538SS Stage II Filter 18-085 ----- 18-086 18-086 18-086 18-086Stage II Filter 18-081 ----- 18-099 18-099 18-099 18-099Clear Filter Oil / Cleaner Kit for SS Filters 18-075 ----- 18-075 18-075 18-075 18-075Red Filter Oil / Cleaner Kit for Std. Filters 18-076 ----- 18-076 18-076 18-076 18-076
2008-12 FLt MoDeLS
1993-1999eVo. CArB
1999-2001 FUeL INJeCteD FLt 1988-2012 XL
2000-12 tWINCAM (eX. 99-01 FI FLt
& 08-11 FLt)
2008-12 FLt58MM
tHrottLe BoDY
StAGe II ACCeSSorIeS
BIG SUCKer™ StAGe II AIr FILter KItS
BIG SUCKER™ STAGE II AIR FILTER KITS
> Features a one-piece aluminum backing plate/carb support bracket > Eliminates the need for banjo fittings, hoses, and clamps > Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system> Kit features a 20% larger high flow filter for even more airflow > Pre-oiled filter element available in standard or stainless finish. Backing plate offered in plain, chrome or black finish.
$139.95$159.95$159.95$179.95$179.95
$49.95$59.95$59.95$35.95$6.49
$79.95$54.95$15.95$15.95
Smooth, chrome / Stainless Smooth, black / Stainless
Scalloped, chrome / Stainless Smooth Steel cover, chrome / Standard Retro, chrome / StandardScalloped, black / Standard
Smooth, chrome / Standard Smooth, black / Standard
< STAG
E II BIG SU
CKER | M
OTO
RS & EXH
AU
ST > |
94
Stage II, Smooth, Chrome 18-819 18-818 18-790 18-782 18-783Stage II, Smooth, Black 18-821 18-820 18-774 18-775 18-776SS Stage II, Smooth, Chrome 18-350 18-351 18-352 18-353 18-354SS Stage II, Smooth, Black 18-355 18-356 18-357 18-358 18-359
Stage II, Smooth 18-814 18-810 18-799 18-797 18-806Stage II, Scalloped, Chrome 18-816 18-811 18-802 18-793 18-807Stage II, Scalloped, Black 18-845 18-846 18-847 18-848 18-849Stage II, Grooved 18-817 18-812 18-800 18-798 18-805Stage II, Retro 18-840 18-841 18-842 18-843 18-844SS Stage II, Smooth 18-854 18-855 18-856 18-857 18-858SS Stage II, Scalloped, Chrome 18-867 18-868 18-869 18-870 18-871SS Stage II, Scalloped, Black 18-872 18-873 18-874 18-875 18-876SS Stage II, Grooved 18-877 18-878 18-879 18-880 18-881SS Stage II, Retro 18-882 18-883 18-884 18-885 18-886
Stage II Steel Cover, Chrome 18-770 18-770 18-770 18-770 18-770Stage II Steel Cover, Black 18-771 18-771 18-771 18-771 18-771Scalloped Stage II Billet Cover, Chrome 18-794 18-794 18-794 18-794 18-794Scalloped Stage II Billet Cover, Black 18-788 18-788 18-788 18-788 18-788Smooth Stage II Billet Cover 18-795 18-795 18-795 18-795 18-795Grooved Stage II Billet Cover 18-796 18-796 18-796 18-796 18-796Retro Stage II Billet Cover 18-786 18-786 18-786 18-786 18-786Stage II Pre-Filter (Rain Sock) 18-061 18-061 18-061 18-061 18-061
2008-12 FLT MODELS
1993-1999EVO. CARB
1999-2001 FUEL INJECTED FLT 1988-2012 XL
2000-12 TWINCAM (EX. 99-01 FI FLT
& 08-11 FLT)
BILLET SUCKER™ STAGE II AIR FILTER KITS
STAGE II ACCESSORIES
BILLET SUCKER™ STAGE II AIR FILTER KITS w/ STEEL COVER
BILLET SUCKER™ STAGE II AIR FILTER KITS
> These complete high performance air � lter kits include a 20% larger air � lter than our Stage I kits, a billet aluminum or stamped steel outer cover and our patented Big Sucker™ backing plate> Available with a standard red air � lter or our new SS stainless steel jacketed air � lter > Optional pre-� lter (rain sock) is available separately> Replacement Stage II parts are available on the previous page
$169.95$169.95$189.95$189.95
$224.95$224.95$224.95$224.95$224.95$244.95$244.95$244.95$244.95$244.95
$49.95$49.95
$119.95$119.95$119.95$119.95$119.95$39.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
95
2008-12 FLt MoDeLS
1993-1999eVo. CArB
1999-2001 FUeL INJeCteD FLt 1988-2012 XL
SS Derby Sucker Kit, ChromeSS Derby Sucker Kit, BlackDerby Sucker Kit, ChromeDerby Sucker Kit, Black
Derby Sucker Hardware Kit Derby Sucker Gasket Kitt Standard Replacement Filter Stainless Replacement Filter Clear Air Filter Oil / Cleaner kitRed Air Filter Oil / Cleaner kit
2000-12 tWINCAM (eX. 99-01 FI FLt
& 08-12 FLt)
Stainless Filter / Chrome Ring Standard Filter / Chrome Ring
2008-12 FLt58MM
tHrottLe BoDY
DerBY-SUCKer ACCeSSorIeS & repLACeMeNt FILterS
CoMpLete DerBY SUCKer w/o CoVer
NESS DERBY SUCKER AIR FILTER KIT
> One of the simplest and most universal ideas for air filter kits today > Our innovative hi-flow air filter accepts any five hole Twin Cam derby cover on the market. Choose Ness, HD® or your favorite aftermarket design > Each kit also includes our patented Big Sucker™ backing plate for incredible performance and clean style, our standard or SS stainless steel jacketed derby filter, custom trim ring and necessary hardware> Ness Derby covers available on pg. 107
18-37018-37518-38018-385
18-54418-53518-30118-30018-07518-076
-----18-397 -----18-399
18-54418-53518-30118-30018-07518-076
18-37118-37618-38118-386
18-54518-53618-30318-30218-07518-076
18-37218-37718-38218-387
18-54618-53618-30318-30218-07518-076
18-37318-37818-38318-388
18-54718-53718-30518-30418-07518-076
18-37418-37918-38418-389
18-54818-53818-30318-30218-07518-076
< D
ERBY
SU
CKE
R A
IR C
LEA
NER
| M
OTO
RS &
EXH
AU
ST >
|
NOTE: Arlen Ness derby covers can be found on pg. 109
$189.95$189.95$169.95$169.95
$44.95$6.49
$64.95$84.95$15.95$15.95
96
Stainless / Scalloped, Chrome
Stainless / Engraved, BlackStainless / Scalloped, Black
Stainless / Deep Cut, Black
Stainless Filter / Chrome Ring
Stainless / Retro, Chrome Stainless / Holeshot, Black
Stainless / Deep Cut, Chrome
< D
ERBY SUC
KER AIR C
LEAN
ER | MO
TORS &
EXHA
UST > |
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL< ARLEN NESS MOTORCYCLES ARLEN NESS MOTORCYCLES | 6050 DUBLIN BL
< LIT
TLE
SUC
KER
AIR
CLE
AN
ER |
MO
TORS
& E
XHA
UST
> |
97
Money is tight these days and expensive motorcycle parts aren’t exactly on everyone’s need list. With that thought in mind the team at Arlen Ness went to the drawing board with the purpose of creating a product that was easy on the wallet but BIG on results. The ending result was the Little Sucker, an air cleaner kit that produces BIG gains in horsepower and isn’t worried about exposed hoses. The Little Sucker features a steel backing plate integrated into the actual fi lter, eliminating the need for an addi-tional aluminum backing plate. The plate features molded urethane that forms a radius inlet for big performance. The kit utilizes factory exposed breather hoses and hardware and accepts the factory cover. Kits are also available with a smooth chrome or black cover for a clean custom look.
Over time and miles on the road your Big Sucker will collect dust, dirt, and other debris. Eventually its’ going to need a good cleaning. Our Filter Tune-up kit will do just that and more.
> Clean your Big Sucker Filter> Restore full airfl ow effi ciency> Make your old fi lter perform like new!
NESS LITTLE SUCKER AIR FILTER KIT
NESS FILTER TUNE UP KIT
NOTE: Fits behind stock OEM cover or available with custom steel cover.
18-4512000-2012 Big Twin, except 2008-2012 FLT (black cover)
18-4502000-2012 Big Twin, w/ chrome cover
18-4532008-2012 FLT (black cover)
18-4522008-2012 FLT (chrome cover)
18-5502000-2012 Big Twin, except 2008-2012 FLT*
18-075Clear fi lter oil / Cleaner kit for SS fi lters
18-5512008-2012 FLT *
18-076Red fi lter oil / Cleaner for standard fi lters
Clear fi lter oil for Stainless fi lters < 18-075 >
Clear fi lter oil for Standard fi lters < 18-076 >
$119.95
$119.95
$119.95
$119.95
$99.95
$15.95
$99.95
$15.95
98
Direct replacement high performance � lters for disposable � lter ele-ments found on the Screaming Eagle® kits from the factory.
Our � lters are pre-oiled and feature 4 layers of surgical grade cotton for optimum air � ow and superior � ltration for your engine.
The � lters are hand poured one at a time in a urethane body that won’t crack or fall apart. The process of hand making each � lter ensures a clean smooth line between the � lter element and the � lter body. Most competitors use a “spinning“ process, which results in messy and restrictive wicking material on the � lter element.
These � lters are 100% re-usable and washable so they will virtually last the life of your motorcycle. Use our Filter Tune-up Kits to recharge your � lter and restore optimum performance. Filters are available in standard red � lament or our exclusive SS stainless steel jacketed � lament.
Filters can accept Arlen Ness Stage 1 top covers for an exposed � lter with a high performance and custom look. The � lters also accept stock Screaming Eagle® air cleaner covers.
These innovative replacement � lters for Screaming Eagle® air cleaner kits will accept any 5-hole Big-Twin style derby cover. Comes with everything you need to mount to your Sceaming Eagle® backing plate, just install the � lter, add the derby cover, and you have completely changed the look of your engine.
REPLACEMENT AIR FILTERS FOR SCREAMING EAGLE®
REPLACEMENT DERBY SUCKER FILTERS FOR SCREAMING EAGLE®
18-0302008-2012 FLT
18-3102008-2012 FLT
18-0312008-2012 FLT, stainless
18-3112008-2012 FLT, stainless
18-0981999-2012 FXST, 2002-2007 FLT & 1997-2007 FXD
18-3121999-2012 FXST, 2002-2007 FLT & 1997-2007 FXD
18-0841999-2012 FXST, 2002-2007 FLT & 1997-2007 FXD, stainless
18-3131999-2012 FXST, 2002-2007 FLT & 1997-2007 FXD, stainless
Standard Ness � lterStainless Ness � lter
< REPLA
CEM
ENT FILTERS | M
OTO
RS & EXH
AU
ST > |
$49.95
$69.95
$69.95
$89.95
$49.95
$69.95
$69.95
$89.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Double Barrel, black
> Double Barrel, chrome
> Twin Sucker air cleaner
> Retro air cleaner covers
< A
IR C
LEA
NER
KIT
S | M
OTO
RS &
EXH
AU
ST >
|
99
> Smooth � owing design changes the look and performance of your bike> These kits include an aluminum Double Barrel outer cover, an aluminum radius inlet backing plate, washable pre-oiled high performance air � lter and all necessary hardware. > Available in chrome or powder coated black wrinkle � nish
> The Twin Sucker air � lter assembly from Arlen Ness provides optimum air � ow and an aggressive look> Utilizes Ness patented Big Sucker™ hidden breather backing plate> Available in black wrinkle powder coat> Ness stainless steel air � lters perform great and make your bike look even better> All mounting hardware is included
> These air cleaner inserts mount directly over the factory tin cover
NESS DOUBLE BARREL AIR CLEANER
NESS TWIN SUCKER AIR CLEANER
NESS RETRO AIR CLEANER COVER FOR TWIN CAM
CHROME
BLACK
ACCESSORIES
ACCESSORIES
18-9502008-2012 FLT
18-9512008-2012 FLT
18-9071993-1999 Evolution
03-699Retro for Twin Cam
18-95200-12 Carb & F.I. models, (ex. 00-01; 08-12 FLT & S&S Carb)
18-9052008-2012 FLT
18-95300-12 Carb & F.I. models, (ex. 00-01; 08-12 FLT & S&S Carb)
18-9081999-2001 Twin Cam FLT F.I. models
18-9541988-2012 XL Sportster™ models
18-9062000-2012 All Carb & F.I. models, except 00-01’ & 08-12’ FLT
18-9551988-2012 XL Sportster™ models
18-9091988-2012 XL Sportster™ models
18-956Replacement � lter
18-910Replacement � lter
> Twin Sucker air cleaner
> optimum air � ow and an aggressive look> > Available in black wrinkle powder coat> Ness stainless steel air � lters perform great and make your bike look even better> All mounting hardware is included
NESS TWIN SUCKER AIR CLEANER
ACCESSORIES
18-9071993-1999 Evolution
18-9052008-2012 FLT
18-9081999-2001 Twin Cam FLT F.I. models
18-9062000-2012 All Carb & F.I. models, except 00-01’ & 08-12’ FLT
18-9091988-2012 XL Sportster™ models
18-910
$249.95
$249.95
$399.95
$89.95
$249.95
$399.95
$249.95
$399.95
$249.95
$399.95
$249.95
$399.95
$29.95
$114.95
> 90° Air Filter
90° Air Filter < 18-488 >
90° Air Filter < 18-468 >
> 2” Smooth Velocity Stack Kit
> 90° Velocity Stack
> 2” Battistini Velocity Stack Kit
100
90° Air Filter < 18-468 >
> Add that radical look to your engine> Both velocity stack and 90 degree brackets feature our patented Big Sucker breather technology> Brackets made to work on stock EVO & Twin Cam Engines (‘99-‘05), S&S 107” and under engines (head breathing) and S&S 111” - 124” engines (case breathing)> Four styles to choose from: 2” Smooth Stack, 2” Battistini Stack, 90° Stack and 90° Air Filter> Pre-� lters available for extra protection against water and debris> Pre-� lters do not lower performance of velocity stack kits
VELOCITY STACK & 90º AIR CLEANER KITS
2” SMOOTH STACK
2” BATTISTINI STACK
90º AIR FILTER KIT
90º VELOCITY STACK
ACCESSORIES
NOTE: S&S 113” engines require the S&S 107” and under kits velocity stack kits.
18-481EVO / Twin Cam motors, chrome
18-483EVO / Twin Cam motors, chrome
18-482EVO / Twin Cam motors, chrome
18-488EVO / Twin Cam motors, chrome
18-467EVO / Twin Cam motors, black
18-480107” and Under S&S motors, chrome
18-484107” and Under S&S motors, chrome
18-486107” and Under S&S motors, chrome
18-489107” and Under S&S motors, chrome
18-468107” and Under S&S motors, black
18-485111” - 124” S&S motors, chrome
18-478111” - 124” S&S motors, chrome
18-487111” - 124” S&S motors, chrome
18-479111” - 124” S&S motors, chrome
18-469111” - 124” S&S motors, black
18-47090º Velocity stack pre-� lter, black
18-4712” Velocity stack pre-� lter, black
18-47490º Air � lter kit pre-� lter, black
18-47390º Replacement air � lter, standard
18-47590º Replacement air � lter, stainless
< IN
TAKES &
VELOC
ITY STAC
KS | MO
TORS &
EXHA
UST > |
$249.95
$249.95
$249.95
$299.95
$299.95
$249.95
$249.95
$249.95
$299.95
$299.95
$249.95
$249.95
$249.95
$299.95
$299.95
$18.95
$21.95
$29.95
$49.95
$69.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< FU
EL T
UN
ERS
| MO
TORS
& E
XHA
UST
> |
101
2007-2012 XL Models2007-2012 Big Twin / 2006 Dyna2010-2012 FLT Models2008-2009 FLT Models 2012 FXST & Dyna
1995-2005 F.I. Big Twin
Improving upon the original Big Shot™ the Big Shot II™ now gives the user the ability to add or subtract fuel from the fuel injection system. Using the same load based technology as the original Big Shot™ the Big Shot II™ always knows how much fuel your bike needs whether you’re going uphill, downhill, cruising or even towing a trailer. Even temperature and elevation do not affect the Big Shot II™; essentially only time adjustment is needed is when you modify your engine.
The Big Shot II™ is a plug and play system and does not require the use of a computer or dyno machine to get your bike running great. CARB approved systems are also available for customers living in California.
> Pull up to 10% of fuel out of the system> 16 positions of adjustability> Adjustable to your riding style. Ability to tell the system how much fuel to add and when> 2 year warranty> CARB units feature same technology but have limited adjust ability to remain within CARB standards
The Cheap-Shot™ is an economical solution to add needed fuel after installing exhaust and air cleaner performance upgrades. Our simple splice-in design saves you big money by eliminating costly plug and play connectors found on most other fuel tuners. The Cheap-Shot adjusts much like a carburetor by adjusting four individual pods using an ordinary screw driver.
Our load based technology senses the load on the engine in any riding situation to provide the optimal fuel requirement to the engine. Easy to follow installation instructions are provided.
> Utilizes the latest in load-based technology in fuel injection performance > Comes pre-loaded with base maps for different models that can be � ne tuned to your individual riding style> Laptops and Dynos are not required > Detects the exact amount of load on the engine at any RPM and at any speed. Delivers the perfect amount of fuel to the engine for optimum performance
BIG-SHOT 2 ADJUSTABLE FUEL TUNER
NESS CHEAP-$HOT™ FUEL TUNER
BIG-SHOT™ ADJUSTABLE FUEL TUNER
49-STATEAPPLICATION
APPLICATION 49-STATE
CA MODELS
CA MODELS
18-65418-65518-65818-65618-659
18-600
18-66418-66518-66818-66618-669
18-611
18-6331995-2006 F.I. Big Twin, except V-Rod & 06 Dyna™
18-6342007-2012 Big Twin models & 06-up Dyna™
> High � ow smooth styled chrome gas valves> Three different outlets available> Positive lever action> Economically priced
NESS GAS VALVES
07-030Vertical outlet petcock
07-032Forward outlet petcock
07-031Rear outlet petcock
$319.95$319.95$319.95$319.95$319.95
$249.95
$149.95
$149.95
$34.95
$34.95
$34.95
102
> World class performance, quality, style and sound for your Bagger> Rinehart’s Venturi chamber baf� e creates the ultimate performance through out the RPM range> Ness designed billet end caps add the � nishing touch to gleaming chrome muf� er bodies> Muf� ers � t with stock headers on 1995-2012 FLT models > Designed and built in the USA> Ness designed end caps are also sold individually to update your existing Rinehart FL 3.5” muf� ers
> Great performance, sound, style and price> 2-1/2” chrome muf� er bodies feature steel core baf� es and billet aluminum end caps> Muf� ers are direct bolt on to stock mounts> Sold in pairs > Made in the USA
NESS/RINEHART 3-1/2” MUFFLERS & TIPS
NESS 2-1/2” SHOOTER SLIP-ON MUFFLERS
05-932Chrome muf� ers w/ chrome end caps (pair)
05-931Ness black end cap, each
05-9802004-2012 XL Sportster™ models
05-9822007-2012 FXST Softail™ models
05-933Chrome muf� ers w/ black end caps (pair)
05-930Ness chrome end cap, each
05-9811995-2012 FXD Dyna™ models
05-9842007-2012 FLSTN models
05-9832007-2012 FLSTF models
MUFFLER KITS
MUFFLER TIPS
SHOOTER MUFFLERS
NESS/RINEHART 3-1/2” MUFFLERS & TIPS
Muf� ers w/ chrome tips < 05-932 > black tip <05-933 >
Ness 2--1/2” Shooter muf� ers w/ black tips
< M
UFFLER TIPS | M
OTO
RS & EXH
AU
ST > |
$649.95
$124.95
$299.95
$299.95
$649.95
$124.95
$299.95
$299.95
$299.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
< O
IL PR
ESSU
RE G
AU
GE
KITS
| M
OTO
RS &
EXH
AU
ST >
|
103
< O
IL PR
ESSU
RE G
AU
GE
KITS
| MO
TORS
& E
XHA
UST
> > |
103
> Features stainless housing and glass lens, � lled with vibration dampening glycerin for lasting performance> Billet bracket mounts oil pressure gauge to the rear rocker box> Radius & grooved � nished in chrome, Deep Cut in black.> Complete kit includes: Ness 0-60# gauge, billet bracket/ cone, stainless steel hose assembly and necessary hardware
ARLEN NESS OIL PRESSURE GAUGE KITS
COMPLETE KIT
ACCESSORIES
15-658Radius, 1999-up Twin Cam
15-659Radius, 1993-up Sportster™
15-646Replacement hose, Sportster™
15-650Grooved, 1984-1999 Big Twin
15-653Replacement hose, 1984-1999 Big Twin / S&S EVO
15-668Deep Cut, 1999-up Twin Cam
15-670Deep Cut, 1984-1999 Evolution engine
15-657Radius, 1984-1999 Big Twin
15-649Replacement hose, Twin Cam
15-666Radius, S&S Evolution engine
15-655Replacement 1-1/2” gauge
15-665Replacement Deep Cut gauge
15-667Deep Cut, 1993-up Sportster™
Ness Deep Cut Oil Pressure Gauge kit < 15-668 >
Ness Radius Oil Pressure Gauge kit < 15--658 >
$199.95
$199.95
$37.95
$154.95
$39.95
$199.95
$199.95
$179.95
$35.95
$199.95
$39.95
$39.95
$199.95
< FU
EL AC
CESSO
RIES | MO
TORS &
EXHA
UST > |
114
< O
IL PRESSURE G
AU
GE KITS | M
OTO
RS & EXH
AU
ST > |
104
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Retro, chrome < 03-539 >
Slot Track, chrome < 03-492 >
Slot Track, black < 03-493 >Slot Track, black
> Derby covers are CNC machined from billet aluminum > Each style has matching point covers and many other accessories available > Available in chrome or black anodize � nish> Each cover includes chrome hardware
ARLEN NESS DERBY COVERS
1999-UP TWIN-CAM (5-HOLE)
03-503 Scalloped, chrome
03-596 Engraved, black
03-490 Hole Shot, chrome
03-579 Deep Cut, black
03-492 Slot Track, chrome
03-583 Scalloped, black
03-570 Deep Cut, chrome
03-501 Hole Shot, black
03-598 Engraved, chrome
03-539 Retro, chrome
03-493 Slot Track, black
Hole Shot, black < 03-501 >
Scalloped, black < 03-583 >
Deep Cut, black < 03-579 >Deep Cut, chrome < 03-570 >
Hole Shot, chrome < 03-490 >
Scalloped, chrome < 03-503 >
Engraved, chrome < 03-598 > Engraved, black < 03-596 >
Deep Cut, chrome < 03-570 >Deep Cut, chrome < 03-570 >
Scalloped, chrome < 03-503 >
> Each cover includes chrome hardware
1999-UP TWIN-CAM (5-HOLE)
03-503
03-596
03-490
03-579
03-583
03-570
03-501
03-598
03-539
Scalloped, black < 03-583 >
Deep Cut, black < 03-579 >
Scalloped, chrome < 03-503 >
Slot Track, chrome
Slot Track, black Slot Track, black
< D
ERBY
CO
VERS
| C
OVE
RS >
|
107
$129.95
$129.95
$149.95
$129.95
$129.95
$129.95
$149.95
$129.95
$129.95
$119.95
$129.95
Slot Track, chrome < 03-492 >
ARLEN NESS DERBY COVERS
> Deep Cut, chrome > Deep Cut, black
> Hole Shot, chrome> Hole Shot, black
> Retro, chrome
> Scalloped, chrome
> Scalloped, black
> Engraved, chrome > Engraved, black> Engraved, black > Scalloped, chrome
> Scalloped, black
> Slot Track, chrome > Slot Track, black
Holeshot, black installed < 03-504 >
> Engraved, chrome
Holeshot, black installed < 03-504 >
> Deep Cut, chrome
> Hole Shot, chrome> Hole Shot, black
> Unique designs available for all 1999-up Twin Cam> CNC machined billet aluminum parts are beautifully chrome plated or black anodized> Each cover includes chrome hardware
ARLEN NESS POINT COVERS
1999-UP TWIN-CAM (5-HOLE)
03-506 Scalloped, chrome
03-597 Engraved, black
03-491 Hole Shot, chrome
03-574 Deep Cut, black
03-494 Slot Track, chrome
03-584 Scalloped, black
03-573 Deep Cut, chrome
03-504 Hole Shot, black
03-599 Engraved, chrome
03-537 Retro, chrome
03-495 Slot Track, black
< PO
INT C
OVERS | C
OVERS > |
108
$54.95
$89.95
$99.95
$89.95
$89.95
$69.95
$89.95
$99.95
$89.95
$59.95
$89.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> These round horn covers accept any 5 hole point cover to match the theme of your bike. Choose Ness (pg.108), HD® or your favorite aftermarket design> Steel construction cover is � nished in chrome or black powder coated � nish> Replaces the factory “cowbell” shaped horn cover on 1991- 2012 Big Twin and XL models
> Cut from 6061-T6 billet aluminum> Add some needed style to the look of your inner fairing> Designed to � t FLT models with bat wing style fairings > Sold in pairs
ARLEN NESS HORN COVERS
DEEP CUT SPEAKER GRILL
03-590Ness horn cover, chrome
03-900Chrome Speaker grill, pair, chrome
03-591Ness horn cover, black
03-901Chrome Speaker grill, pair, black
NOTE: Point cover sold separately
DEEP CUT SPEAKER GRILL
Horn Cover < 03-590 > shown w/ Engraved point cover < 03-597 >
ARLEN NESS HORN COVERS
< H
ORN
CO
VERS
& S
PEA
KER
GRI
LLS
| CO
VERS
> |
109
$49.95
$139.95
$49.95
$139.95
ARLEN NESS HORN COVERS
DEEP CUT SPEAKER GRILL
> Deep Cut, black
> Engraved, black
> Retro, chrome
> Machined from billet aluminum> Battistini covers are supplied with paint-able black ABS plastic inserts to cover the factory latch> Latch covers are designed for Dresser models 1993-up and retain full function of the stock latches> Available in chrome plated or black anodized � nish> Each style has many matching accessories to enhance every angle of your bagger > Sold in pairs
NESS SADDLEBAG LATCH COVERS
CHROME
BLACK
03-526Battistini latch covers, chrome
03-581Engraved latch covers, black
03-529Deep Cut latch covers, chrome
03-559Engraved latch covers, chrome
03-554Deep Cut latch covers, black
03-569Retro latch covers, chrome
> Engraved, chrome
> Deep Cut, black
> Deep Cut, chrome
> Battistini, chrome> Battistini, chrome> Battistini, chrome
< SA
DD
LEBAG
LATCH
ES | CO
VERS > |
110
$199.95
$189.95
$189.95
$189.95
$189.95
$169.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Scalloped fuel door cover and dash insert add a touch of class to the dash area on dresser models> Machined from forged aluminum results in a high quality � nish and long lasting durabilty> Fuel door covers � t FLT models 1992-2012> Dash insert � ts Street Glide® (FLHX) models and FLT/FLHT’s � t with HD® part number: 71288-03a
> Grooved pattern cleans up the dash area on most late model dressers
> Machined from 6061-T6 billet aluminum> Lower dash insert � ts FLT models 1989-2007 except for the
Ultra Classic and Screamin’ Eagle™ models> Available in chrome � nish
> Retro fuel door cover and dash insert adds distinct style to the dash area on bagger models> Machined from forged aluminum results in a high quality � nish> Fuel door cover � ts FLT models 1992 and up> Dash insert � ts Street Glide® (FLHX) models and FLT/ FLHT’s � t with HD® part number: 71288-03A
SCALLOPED DASH INSERT & FUEL DOOR COVER
GROOVED LOWER DASH
RETRO DASH INSERT & FUEL DOOR COVER
FUEL DOOR
DASH
FUEL DOOR
DASH INSERT
DASH INSERT
04-1371992-2007 FLT
04-138Grooved Lower Dash insert
04-1471992-2007 FLT
04-1172006-2007 FLHX
04-1302008-2012 FLT
04-1422008-2012 FLT
04-1312008-up FLHX
04-1192008-up FLHX
< D
ASH
AC
CES
SORI
ES |
CO
VERS
> |
111
$44.95
$89.95
$119.95
$119.95
$44.95
$119.95
$44.95
$99.95
SCALLOPED DASH INSERT & FUEL DOOR COVER
GROOVED LOWER DASH
RETRO DASH INSERT & FUEL DOOR COVER
> Available for most popular front and rear applications> Includes chrome hardware> Made in the USA
NESS MASTER CYLINDER COVERS
< M
ASTER C
YLIND
ER & G
AS C
APS | C
OVERS > |> Baby Moon > Flamed > Scalloped
> Retro, chrome
> Engraved, chrome
> Engraved, Black
> Deep Cut, chrome
> Deep Cut, black
Engraved, Chrome Engraved, Black Deep Cut, Chrome Deep Cut, BlackRetro, Chrome
03-44203-44303-45403-45503-449
03-44003-44103-45203-45303-448
03-44403-44603-45603-45703-450
03-44503-44703-45803-45903-451
2008-2012 FLT & 2006-2012 V-ROD, FRONT STYLE
2005-2007 FLT & 2006-2012 DYNA & SOFTAIL, FRONT
2008-2012FLT, REAR
2005-2007 FLT & 2006-2012 SOFTAIL, REAR
> Low pro� le design is available in three different styles> All chrome-plated billet aluminum caps measure 1⁄4” to 3/8” tall> Exclusive ratcheting design provides proper torque and design alignment> Early screw-in gas caps � t all models 1982-96> Late screw-in gas caps � t all models 1997-up> “Dummy” gas caps replace the fuel gauge style gas caps found on some late Big Twin models> Vented gas caps have right-hand thread; non-vented have left-hand thread> All gas caps are sold individually
NESS LOW PROFILE GAS CAPS
Baby MoonFlamedScalloped
07-15207-15807-181
07-15307-15907-182
07-25207-25807-281
07-25307-25907-282
07-16707-17007-183
STYLE 1982-96VENTED
1982-96NON-VENTED
1997-UPNON-VENTED
DUMMYCAP
1997-UPVENTED
NOTE: Most aftermarket, American Iron Horse and Big Dog fuel tanks accept 1982-96 style gas caps
112
$49.95$49.95$49.95$49.95$49.95
$44.95$44.95$44.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 > < ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL | PH: 925.479.6350 | FAX: 925.479.6351 FAX: 925.479.6351 FA >
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> Deep Cut headlight grills add a clean and different look to your stock headlight> Mounts to your factory headlight ring or to our billet LED rings> Grill can be mounted vertical or horizontal to achieve your desired appearance> Machined from 6061-T6 billet aluminum and chrome plated or black anodized> Designed to � t FLHX, FLHR and FLHT models
NESS DEEP CUT HEADLIGHT GRILL
08-400Deep Cut Grill, chrome
08-401Deep Cut Grill, black
> These forged aluminum headlights will � t on most bottom mount applications> Available in bullet or stretched bullet designs> Bullet design is 6-3/4” long and Stretched bullet is 9-1/4” long> Some styles available with unique Deep Cut grill> Most designs available in chrome or black anodized> All headlight assemblies include a halogen H4 sealed beam> Optional extended headlight mount (08-362) is available separately when additional clearance is needed for your application
> Moves headlight forward by approximately 2-1/4”> Designed to work on bottom triple tree applications> Will not work on Ness-Tech® triple trees
NESS 5-3/4” BILLET HEADLIGHTS
NESS 2-1/4” EXTENDED HEADLIGHT BLOCK
08-336Bullet headlight w/ Deep Cut grill, chrome
08-362Extended headlight block
08-339Stretched Bullet w/ visor, chrome
08-326Stretched Bullet w/ Deep Cut grill, chrome
08-337Bullet headlight w/ Deep Cut grill, black
08-345Stretched Bullet w/o visor, chrome
08-327Stretched Bullet w/ Deep Cut grill, black
5-3/4” Stretched Bullet w/ visor < 08-339 >
5-3/4” Stretched Bullet < 08-345 >
08-345Stretched Bullet w/o visor, chromeStretched Bullet w/o visor, chrome
5-3/4” Stretched Bullet w/ visor < 08-339 >5-3/4” Stretched Bullet w/ visor < 08-339 >
< H
EAD
LIGH
TS &
AC
CES
SORI
ES |
CO
VERS
> |
115
5-3/4” Stretched Bullet w/ Deep Cut Grill < 08-326 >
5-3/4” Black Bullet w/ Deep Cut Grill < 08-327 >
5-3/4” Black Bullet w/ Deep Cut Grill < 08-337 >
5-3/4” Bullet w/ Deep Cut Grill < 08-336 >
$99.95
$99.95
$34.95
$299.95
$299.95
$349.95
$299.95
$259.95
$349.95
> Add style and safety to your factory headlight assembly> Innovative billet headlight rings are available with two different LED con� gurations. One design features super bright daytime running lights that are found in many of today’s luxury cars. We also offer a clean turn signal version featuring super bright amber LED’s with left and right sides � ashing independently> Billet aluminum headlight rings are available in chrome or black anodized > Simple installation taps into your factory wiring harness
FIRE-RING LED BEZEL FOR 7” FACTORY HEADLIGHTS
NESS DEEP CUT HEADLIGHT GRILL
CHROME RING
BLACK RING
08-404White LED runnning lights, 1983-up FLHT/FLHX/FLHR
08-405White LED runnning lights, 1983-up FLHT/FLHX/FLHR
08-408White LED runnning lights, 1993-up FLST Softail™
08-409White LED runnning lights, 1993-up FLST Softail™
08-406Amber LED turn signals, 1983-up FLHT/FLHX/FLHR
08-407Amber LED turn signals, 1983-up FLHT/FLHX/FLHR
08-410Amber LED turn signals, 1993-up FLST Softail™
08-411Amber LED turn signals, 1993-up FLST Softail™
NESS 5-3/4” BILLET HEADLIGHTS
NESS 2-1/4” EXTENDED HEADLIGHT BLOCK
Black Fire Ring headlight bezel < 08-405 >
Chrome Fire Ring headlight bezel < 08-404 >
Black Fire Ring headlight bezel < 08-411 >
< FIRE RIN
G H
EAD
LIGH
T BEZEL | CO
VERS > |
116
5-3/4” Black Bullet w/ Deep Cut Grill < 08-327 >
$199.95
$199.95
$199.95
$199.95
$199.95
$199.95
$199.95
$199.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Rear Power LED, Chrome
Rear Power LED, Black
> Front Power LED, Chrome w/ Amber LED
> Rear Power LED, Chrome w/ Red LED
Front Power LED, Chrome
Front Power LED, Black
> These are some of the cleanest and brightest direct bolt-on turn signals you will ever � nd for your ride. No spacers or adapters necessary> Our compact billet design � ow nicely into your forks or fender strut to make them almost invisible. These lights contain two Power LED’s that are equivalent to nearly 25-30 traditional LED’s. The light produced from the Power LED’s is incredible.> These lights are sold in pairs in chrome or black anodized for the following models:
NESS DIRECT BOLT-ON TURN SIGNALS w/ POWER LED
FRONT
REAR
12-7602006-2012 FLHX & 2004-2012 FLT, chrome w/ Amber LED
12-7402000-up FXD/XL/FXST, chrome w/ Red LED
12-7442000-up FXD/XL/FXST, black w/ Amber LED
12-7432000-up FXD/XL/FXST, chrome w/ Amber LED
12-7612006-2012 FLHX & 2004-2012 FLT, black w/ Amber LED
12-7412000-up FXD/XL/FXST, black w/ Red LED
Front Power LED, Black
Front Power LED, Chrome
Rear Power LED, Chrome
Rear Power LED, Black
Rear Power LED, ChromeRear Power LED, Chrome
X: 925.479.6351
< D
IREC
T BO
LT-O
N T
URN
SIG
NA
LS |
CO
VERS
> |
117
$149.95
$149.95
$149.95
$149.95
$149.95
$149.95
Rear Power LED, Chrome
Rear Power LED, Black
Front Power LED, Chrome
Front Power LED, Black
NESS DIRECT BOLT-ON TURN SIGNALS w/ POWER LED XENOLEN TURN SIGNALSXenolen indicator lights distributed by Arlen Ness feature cutting edge LED technology. These high power LED’s are extremely bright and voltage ef� cient, outperforming leading competitors. Their small size, design, and incredible performance add safety and style to your motorcycle.> Extreme detail and technology goes into each unique design> CNC sculpted billet aluminum housings (except Infernal design)> Super bright LED con� gurations that out perform leading competitors> Universal applications � t HD®’s, Cruisers or sport bikes> Indicators include 8mm stud which will � t in any 5/16” application (standard HD® & Cruiser)> Available in chrome, black and gold anodized � nishes> Available in 5 different styles, sold in pairs
INFERNAL XENOLEN TURN SIGNALS
12-772 Infernal w/ Amber LED
12-773 Infernal w/ Amber LED
12-776 Infernal w/ Red LED
12-777 Infernal w/ Red LED
CHROME
BLACK
ARCHFIEND XENOLEN TURN SIGNALS
12-770 Archfiend w/ Amber LED
12-771 Archfiend w/ Amber LED
12-774 Archfiend w/ Red LED
12-775 Archfiend w/ Red LED
CHROME
BLACK
INFERNAL
> Length: 90mm > Die-Casting/CNC Machined Housing> Available in Red or Amber> 20 High Power LEDS, 12V 2.1W
ARCHFIEND
> Length: 74mm > Die-Casting/CNC Machined Housing > Available in Red or Amber > Power LED x2, 12V 3.1W
COBRA
> Length: 78mm > CNC Machined Housing> Available in Red or Amber> 23 High Power Amber LEDS, 12V 1.5W
GUARDIAN
> Length: 108mm > CNC Machined Housing > Available in Red or Amber> 20 High Power Amber LEDS, 12V 1.5W
OTHELLO
> Length: 65mm > CNC Machined Housing> Available in Red or Amber> 21 High Power Amber LEDS, 12V 2.5W
COBRA XENOLEN TURN SIGNALS
GUARDIAN XENOLEN TURN SIGNALS
12-793 Cobra w/ Amber LED
12-790 Guardian w/ Amber LED
12-794 Cobra w/ Amber LED
12-791 Guardian w/ Amber LED
12-795 Cobra w/ Red LED
12-792 Guardian w/ Red LED
CHROME
CHROME
BLACK
BLACK
GOLD
GOLD
OTHELLO XENOLEN TURN SIGNALS
12-796 Othello w/ Amber LED
12-797 Othello w/ Amber LED
12-798 Othello w/ Red LED
CHROME
BLACK
GOLD
> Die-Casting/CNC Machined Housing
> Power LED x2, 12V 3.1W
> Indicators include 8mm stud which will � t in any 5/16”
> Available in chrome, black and gold anodized � nishes> Available in 5 different styles, sold in pairs
> 20 High Power LEDS, 12V 2.1W
> 21 High Power Amber LEDS, 12V 2.5W> 21 High Power Amber LEDS, 12V 2.5W
> 20 High Power Amber LEDS, 12V 1.5W> 20 High Power Amber LEDS, 12V 1.5W> 20 High Power Amber LEDS, 12V 1.5W
> 23 High Power Amber LEDS, 12V 1.5W
< XEN
OLEN
TURN
SIGN
ALS | C
OVERS > |
118
$119.95
$119.95
$119.95
$119.95
$179.95
$179.95
$179.95
$179.95
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
$129.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> The � nest upgrade you can make to your factory turn signals> Available in dual � lament or single � lament applications> Our dual function LED design features a billet aluminum ring that is integrated into the lens. Each billet ring includes 7 exposed white, amber or red LED’s to work as running lights. Behind the lens features a cluster of LED’s for turn signal and or brake light functions. These � t all front and rear applications with a light socket for an 1157 type bulb > Our single � lament design has the Fire Ring LED’s and the cluster of LED’s behind the lens light as one. These are for rear turn signal applications with a light socket for an 1156 type bulb. > Simple plug and play installation> Sold in pairs
FIRE RING LED KITS FOR FACTORY TURN SIGNALS
LENS TRIM RING TRIM LED FILAMENT
< FI
RE R
ING
TU
RN S
IGN
ALS
| C
OVE
RS >
|
119
NOTE: For OEM functionality all front applications require dual � lament kits and rear applications require single � lament kits except 07-12 XL1200N & 09-12 XL883N models which require dual � lament kits.
12-75612-75712-75812-75912-75412-75512-74512-746
AmberAmberAmberAmberRedRedRedRed
ChromeChromeBlackBlack
ChromeBlack
ChromeBlack
Amber WhiteAmberWhiteRedRedRedRed
DualDualDualDualDualDual
SingleSingle
NOTE: A load equalizer will be need to be purchased separately for your year and application
> Black Fire Ring w/ Amber LED
$119.95$119.95$119.95$119.95$119.95$119.95$119.95$119.95
FIRE RING LED KITS FOR FACTORY TURN SIGNALS
< D
EEP CU
T TURN
SIGN
ALS | C
OVERS > |
120
> De� nitely the � nest factory style turn signal on the market> Deep Cut styled billet housings in chrome or black anodized> Super bright “Fire Ring” LED lens kit adds the � nishing touch> Sold individually
DEEP CUT OEM STYLE TURN SIGNALS w/ FIRE RING LED’s
LENS TRIM RING TRIM LED FILAMENT
AmberAmberAmberAmberRedRedRedRed
AmberAmberAmberAmber
ChromeChromeBlackBlack
ChromeBlack
ChromeBlack
ChromeBlack
ChromeBlack
Amber WhiteAmberWhiteRedRedRedRed
AmberAmberWhiteWhite
DualDualDualDualDualDual
SingleSingleDualDualDualDual
NOTE: For OEM functionality all front applications require dual � lament kits and rear applications require single � lament kits except 07-12 XL1200N & 09-12 XL883N models which require dual � lament kits. A load equalizer will be need to be purchased separately for your year and application a load equalizer will be need to be purchased separately for your year and application.
* Front � tment for FLTR/FLHX only.
> Black Deep Cut w/ Fire Ring LED > Chrome Deep Cut w/ Fire Ring LED
12-75212-76412-75312-76512-75012-75112-74812-74912-766*12-767*12-768*12-769*
$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95$99.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> The perfect solution for relocating your turn signals off of your handlebars Dyna™, FXR and Sportster™ models> Billet aluminum mounts bring your turn signals in close to your factory trees for a clean look. No unsightly clamps. Direct bolt- on to your triple tree pinch bolts> Turn signal mounts can be mounted to upper or lower triple tree
> Smooth 2” style coned design> Available in LED or Standard bulb con� gurations> Each light includes a red and amber lens> Beautifully chrome plated or black anodized � nish> Sold individually> Standard bulb available in single or dual � lament
TURN SIGNAL MOUNTS FOR 39mm & 40mm FORKS
2” SPEEDING BULLET MARKER LIGHTS
CHROME
STANDARD KIT
BLACK
LED KIT
ACCESSORIES
12-7371987-up Sportster™; pre-2006 Dyna™ 87-96 FXR™ w/ 39mm forks
12-701Smooth chrome bullet w/ dual � lament bulb
12-7381987-up Sportster™; pre-2006 Dyna™ 87-96 FXR™ w/ 39mm forks
12-731Smooth chrome bullet w/ Red LED
12-711Replacement Red lens, each
12-708Replacement Bullet ring, each
12-734Smooth black bullet w/ Red LED
12-713Replacement bulb, 12v3w, each
12-739Replacement Red LED board, each
12-7352006-up Dyna™ & Softail Rocker™ w/ 49mm forks
12-700Smooth chrome bullet w/ single � lament
12-7362006-up Dyna™ & Softail Rocker™ w/ 49mm forks
12-730Smooth chrome bullet w/ Amber LED
12-710Replacement bulb, 12v23w, each
12-714Replacement mounting stud, each
12-733Smooth black bullet w/ Amber LED
12-712Replacement Amber lens, each
12-732Replacement Amber LED board, each
LED Speeding Bullet, Amber < 12-730 >LED Speeding Bullet, Red < 12-731 >
LED Speeding Bullet Black, Amber < 12-733 >LED Speeding Bullet Black, Red < 12-734 >
< M
OU
NTS
& T
URN
SIG
NA
LS |
CO
VERS
> |
121
$39.95
$34.95
$39.95
$49.95
$3.95
$8.95
$49.95
$2.95
$19.95
$39.95
$34.95
$39.95
$49.95
$2.95
$3.49
$49.95
$3.95
$19.95
> Chrome plated, die cast construction> Single � lament lights include red and amber lenses> Economically priced> Sold in pairs> 2-3/4” Length (Lens: 1-3/4” x 3/4”)
> Designed to mount on any � at surface such as the side of the fender or fender rail> Measures a thin 5/8” thick> Utilize super-bright L.E.D. Lights for lasting performance> CNC machined from 6061-T6 billet aluminum> Sold in pairs
> Can be used for either front or rear applications> CNC machined from 6061-T6 billet aluminum> Chrome marker lights sold in pairs
> These load equalizers are a must when using custom turn signals such as LED types that draw less current> Eliminates erratic blinking or turn signals> For use with models with self-canceling turn signals
EAGLE EYE MINI MARKER LIGHT TURN SIGNALS
45º MINI FENDER LIGHTS
LED MINI-MARKER LIGHTS
LOAD EQUALIZER
ACCESSORIES
ACCESSORIES
12-721Eagle eye mini marker lights, pair
12-38245º Fender lights, Amber lens
12-385Mini-marker LED light kit, Red lens
12-285Load Equalizer II, splice-in, 1991-1999 HD®
12-187Replacement Amber oval lens, each
12-187Replacement Amber oval lens, each
12-196Replacement Red LED board, each
12-285Load Equalizer for mini-marker light kits
12-38045º Fender lights, Red lens
12-386Mini-marker LED light kit, Amber lens
12-286Load Equalizer II, plug-in, 96-12 FXST; 97-12 FLHT, FLHR, FLHX’ 97-12 Dyna™
12-287Load Equalizer III, plug-in, 2004-2012 XL Sportster™
12-188Replacement Red oval lens, each
12-188Replacement Red oval lens, each
12-197Replacement Amber LED board, each
12-285Load Equalizer for mini fender light kits
45° Mini, Amber < 12-382 >
45° Mini, Red < 12-380 >
< TU
RN SIG
NA
LS & A
CC
ESSORIES | C
OVERS > |
122
$136.95
$26.95
$4.95
$28.95
$136.95
$69.95
$69.95
$4.95
$26.95
$39.95
$167.95
$167.95
$4.95
$4.95
$28.95
$28.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
> These chrome plated license plate assemblies feature a � ush mounted LED taillight with integrated turn signals (5-1/2” H x 7” W)> Taillight/turn signals can be plugged into OEM wiring harness or spliced into a custom application> Several � ush mount pockets are available
> Ness designed license plate kit has all of the features of the Ness/RWD assemblies and more> This license frame also includes DOT approved LED turn signals/brake lights for the ultimate in safety and style> Can be used on any custom application or any RWD recessed mounting pockets featured on this page> Machined and chrome plated in the USA
> Stretched cateye shape gives a clean look to the rear section of your bike> Super bright L.E.D. Bulbs> Chrome plated housing> Available individually or in kit form
NESS/RWD TURN SIGNAL /TAILLIGHT LICENSE PLATE
TAILLIGHT LICENSE PLATE KIT w/ DOT TURN SIGNALS
JET-EYE TAILLIGHT & TURN SIGNAL KIT
TAILLIGHT/TURN SIGNAL/LICENSE ASSEMBLY
MOUNTING POCKET
LED LIGHT KITS
ACCESSORIES
12-560RWD Die-cast assembly
20-530Cat-eye taillight w/ weld in pocket
20-533Universal mount w/ bolt on pocket
20-539Flush mount / bolt on pocket for 2008-2012 FLT
12-520Ness Radius billet assembly
20-590License plate kit w/ DOT turn signals
20-500Jet-Eye taillight ONLY
12-271Jet-Eye turn signal backing plate
12-272Jet-Eye taillight, turn signals & backing plate
12-398Jet-Eye taillight replacement LED board
12-270Jet-Eye turn signals ONLY, pair
12-399Jet-Eye turn signal replacement LED board, pair
12-561Flush mount weld in pocket
20-532Flush mount w/ bolt on pocket
< TA
IL LIG
HT
AC
CES
SORI
ES |
CO
VERS
> |
123
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BLVD. DUBLIN, CA 94568 6050 DUBLIN BL
20-500Jet-Eye taillight ONLY
12-272
AIL
LIGH
T A
CC
ESSO
RIES
$276.95
$167.95
$78.95
$92.95
$299.95
$79.95
$78.95
$349.95
$129.95
$39.95
$224.95
$77.95
$69.95
$33.95
> Great radius lines add style> License frame has hidden mounting for clean look> Lighted LED License frame functions as brake light, taillight and license plate light > Chrome plated die cast construction
> Cutting edge styling> Hidden mounting hardware> Backing plates have fender mounting block integrated into the plate> Beautifully chrome plated> Fits all 1974-up rear fenders (except Fatbob)> License frames and backing plates sold separately
NESS RADIUS LED LICENSE PLATE FRAME
NESS LICENSE BACKING PLATES
NESS LICENSE PLATE FRAMES
12-155LED License plate frame
12-189Replacement LED kit
12-551Stepped backing plate kit, Cast
12-151Radius Grooved backing plate, Billet
12-553Grooved backing plate kit, Cast
12-152Radius bent light & backing plate, Billet
> Billet aluminum construction measures 7.25” x 4.25” to � t most states> Blind hole mounting for a clean look> Available in chrome or black anodized � nish> Made in the USA
LICENSE FRAMES
12-149
12-148
12-141
12-142
12-154
12-159
12-153
Smooth, chrome
Smooth, black
Engraved, chrome
Engraved, black
Deep Cut, chrome
Deep Cut, black
Retro, chrome
Radius Grooved backing plate < 12-151 >
Deep Cut, black < 12-159 >
Engraved, black < 12-142 >
Smooth, black < 12-148 >
Deep Cut, chrome < 12-154 >
Engraved, chrome < 12-141 >
Smooth, chrome < 12-149 >
Retro, chrome < 12-153 >
Grooved backing plate < 12-553 > Stepped backing plate < 12-551 >
Radius bent light license/backing plate < 12-152 >
Grooved backing plate < 12-553 >
license/backing plate < 12-152 >Radius bent light license/backing plate < 12-152 >
< LIC
ENSE PLATE A
CC
ESSORIES | C
OVERS > |
124
$59.95
$59.95
$79.95
$79.95
$79.95
$79.95
$79.95
$49.95
$79.95
$49.95
$119.95
$79.95
$19.95
< ARLEN NESS MOTORCYCLES | 6050 DUBLIN BLVD. DUBLIN, CA 94568 | PH: 925.479.6350 | FAX: 925.479.6351 >
Section 1PURPLE DIGGERCORY NESS 2011
pg.1-2
pg.13-14
pg.31-32
pg.47-48
Section 2Z’S GLIDE
ZACH NESS 2011
Section 3DREAMLINER
ARLEN NESS 2012
Section 4GOLD DIGGER
ARLEN NESS 2011
< A
RLEN
NES
S M
OTO
RCYC
LES
| 201
2 H
ARL
EY C
ATAL
OG
> |
125
Section 5BLUE BAGGERCORY NESS 2011
Section 6MACK’S BAGGERZACH NESS 2011
Section 703 DYNAZACH NESS 2011
Section 8SHOP SOFTAIL™ZACH NESS 2012
pg.67-68
pg.87-88
pg.105-106
pg.113-114
< A
RLEN N
ESS MO
TORC
YCLES | 2012 H
ARLEY C
ATALOG
> |
126
top related