1 Chemical Energetics Created by S. Colgan; Modified by K. Slater Resources: 36,Sta ndard Enthalpy.
Post on 19-Jan-2016
221 Views
Preview:
Transcript
1
Chemical Energetics
Created by S. Colgan; Modified by K. SlaterResources: http://lincoln.pps.k12.or.us/lscheffler/Energetics.ppt#269,36,Standard Enthalpy Changes
2
IB Topic 5: Energetics5.1: Exothermic and Endothermic Reactions
5.1.1 Define the terms exothermic reaction, endothermic reaction and standard enthalpy change of reaction
(ΔHo). 5.1.2 State that combustion and neutralization
are exothermic processes. 5.1.3 Apply the relationship between temperature
change, enthalpy change and the classification of a reaction as endothermic or exothermic.
5.1.4 Deduce, from an enthalpy level diagram, the relative stabilities of reactants and products, and the sign of enthalpy change for the reaction.
3
Heat and TemperatureHeat and Temperature
HeatHeat is energy that is transferred from one is energy that is transferred from one object to another due to a difference in object to another due to a difference in temperaturetemperature
TemperatureTemperature is a measure of the average is a measure of the average kinetic energy of a bodykinetic energy of a body
Heat is always transferred from objects at a Heat is always transferred from objects at a higher temperature to those at a lower higher temperature to those at a lower temperaturetemperature
3
4
5.1.1 Define the terms exothermic reaction, endothermic reaction and standard enthalpy change of reaction (ΔHo).
Exothermic ReactionExothermic Reaction: A process that releases heat to its surroundings. Products have less energy than the reactants
Endothermic ReactionEndothermic Reaction : A process that absorbs heat from the surroundings. Products have more energy than the reactants.
5
5.1.1 Define the terms exothermic reaction, endothermic reaction and standard enthalpy change of reaction (ΔHo).
Standard Enthalpy Change of Reaction (Standard Enthalpy Change of Reaction (∆∆H):H): The heat energy exchanged with the surroundings when a reaction happens under standard conditions (NOT STP… see below).
Since the enthalpy change for any given reaction will vary with the conditions, esp. concentration of chemicals, ΔH are measured under standard conditions:
pressure = 101.3 kPa temperature = 25ºC = 298 K Concentrations of 1 mol dm-3 The most thermodynamically stable allotrope (which in the
case of carbon is graphite)
Only ΔH can be measured, not H for the initial or final state of a system.
6
Pseudonyms (other names) for H Heat of Reaction: Hrxn heat produced in a chemical reaction
Heat of Combustion: Hcomb heat produced by a combustion reaction
Heat of Neutralization: heat produced in a neutralization reaction (when an acid and base are mixed to get water, pH = 7)
Heat of solution: Hsol heat produced by when something dissolves
Heat of Fusion: Hfus heat produced when something melts
Heat of Vaporization: Hvap heat produced when something evaporates
Heat of Sublimation: Hsub heat produced when something sublimes
Heat of formation: Hf change in enthalpy that accompanies the formation of 1 mole of compound from it’s elements (this has special uses in chemistry…)
5.1.1 Define the terms exothermic reaction, endothermic reaction and standard enthalpy change of reaction (ΔHo).
7
5.1.2 State that combustion and neutralization are exothermic processes.
CombustionExothermic reactionGeneral Combustion Reaction Formula:
Compound (usually hydrocarbon) + O2 CO2 + H2O + energy
CH4 + 2O2 CO2 + 2H2O + 890kJ∆H = -890kJ
NeutralizationExothermic reactionAcid + Base Salt + Water + energyHCl + NaOH NaCl + H2O + 57.3 kJ
∆H = -57.3kJ
8
5.1.3 Apply the relationship between temperature change, enthalpy change and the classification of a reaction as endothermic or exothermic.
ExothermicHeat flows out of the
systemSurroundings heat upHeat change (ΔH) < 0
(negative) C8H18+ 12½O2 8CO2 +
9H2O ΔH = -5512 kJ mol-1
H2 + ½O2 H2O ΔH = -286 kJ mol-1
EndothermicHeat flows into the
systemSurroundings cool down Heat change (ΔH) > 0
(positive)
H2O(s) H2O(l) ΔH = +6.01 kJ mol-1
½N2 + O2 NO2
ΔH = +33.9 kJ mol-1
9
Exothermic process is any process that gives off heat – transfers thermal energy from the system to the surroundings.
Endothermic process is any process in which heat has to be supplied to the system from the surroundings.
2H2 (g) + O2 (g) 2H2O (l) + energy
H2O (g) H2O (l) + energy
energy + 2HgO (s) 2Hg (l) + O2 (g)
6.2
energy + H2O (s) H2O (l)
106.5
11
5.1.4 Deduce, from an enthalpy level diagram, the relative stabilities of reactants and products, and the sign of enthalpy change for the reaction.
Exothermic ReactionsProducts more stable than reactants
(lower energy).ΔH = Hproducts – Hreactants
Since the products have less energy than the reactants, the ΔH value is negative.
Endothermic ReactionsProducts less stable than reactants
(higher energy)ΔH = Hproducts – Hreactants
Since the products have more energy than the reactants, the ΔH value is positive.
12
Enthalpy (H) is used to quantify the heat flow into or out of a system in a process that occurs at constant pressure.
H = H (products) – H (reactants)
H = heat given off or absorbed during a reaction at constant pressure
Hproducts < Hreactants
H < 0Hproducts > Hreactants
H > 0 6.4
13
5.1.4 Deduce, from an enthalpy level diagram, the relative stabilities of reactants and products, and the sign of enthalpy change for the reaction.
14
REVIEW
Endothermic Exothermic
Definition
Examples (2)
Change in Temperature
∆H value
Direction of heat flow
Stability of reactants
Stability of products
Bonding
15
REVIEW
Endothermic Exothermic
Definition A process that absorbs heat from the surroundings
A process that releases heat into the surroundings
Examples (2) Combustion & Neutralization reactions
Change in Temperature
Decreases Increases
∆H value Positive Negative
Direction of heat flow From surroundings into system
From system into surroundings
Stability of reactants More stable Less stable
Stability of products Less stable More stable
Bonding Bond breaking Bond making
16
IB Topic 5: Energetics5.2: Calculation of Enthalpy Changes
5.2.1 Calculate the heat energy change when the temperature of a pure substance is changed.
5.2.2 Design suitable experimental procedures for measuring the heat energy changes of reactions.
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water
5.2.4 Evaluate the results of experiments to determine enthalpy changes.
17
Factors Affecting Heat QuantitiesFactors Affecting Heat Quantities
The amount of heat contained by an object The amount of heat contained by an object depends primarily on three factors:depends primarily on three factors: The mass of materialThe mass of material The temperatureThe temperature The kind of material and its ability to The kind of material and its ability to
absorb or retain heat. absorb or retain heat.
17
18
Heat QuantitiesHeat Quantities
The heat required to raise the temperature of 1.00 The heat required to raise the temperature of 1.00 g of water 1 g of water 1 ooC is known as a C is known as a caloriecalorie
Calorie (with a capital “C”)Calorie (with a capital “C”): dietary measurement of heat. Food has potential energy stored in the chemical bonds of food.
1 Cal = 1 kcal = 1000 cal The SI unit for heat is the The SI unit for heat is the joulejoule. It is based on . It is based on
the mechanical energy requirements. the mechanical energy requirements. 1.00 calorie = 4.184 Joules1.00 calorie = 4.184 Joules
18
19
5.2.1 Calculate the heat energy change when the temperature of a pure substance is changed.
Heat Energy Changeq = m x c x ΔT
q = heat (joules or calories)m = mass (g)
c = specific heat (J g-1 oC-1)The amount of heat required to raise the
temperature of 1 g of a substance 1 oC.ΔT = change in temperature
20
5.2.1 Calculate the heat energy change when the temperature of a pure substance is changed.
How much heat in joules will be absorbed when 32.0 g of water is heated from 25.0 oC to 80.0 oC?
q = m x c x ΔTq = ?m = 32.0 gc = 4.18 J g-1 oC-1
ΔT = 80.0-25.0 = 55.0 oC
q = 32.0 x 4.18 x 55.0 = 7,360 J
When 435 J of heat is added to 3.4 g of olive oil at 21 oC, the temperature increases to 85 oC. What is the specific heat of olive oil?
q = m x c x ΔTq = 435 Jm = 3.4 gc = ?ΔT = 85-21 = 64 oC
435 = 3.4 x c x 64 = 2.0 J g-1 oC-1
21
Heat Transfer Problem 1Heat Transfer Problem 1
Calculate the heat that would be required an aluminum Calculate the heat that would be required an aluminum cooking pan whose mass is 400 grams, from 20cooking pan whose mass is 400 grams, from 20ooC to C to 200200ooC. The specific heat of aluminum is 0.902 J gC. The specific heat of aluminum is 0.902 J g -1-1 ooCC-1-1..
Solution
Q = mCT
= (400 g) (0.902 J g0.902 J g-1-1 ooCC-1-1)(200)(200ooC – 20C – 20ooCC))
= 64,944 J= 64,944 J
21
22
5.2.1 Calculate the heat energy change when the temperature of a pure substance is changed.
How much heat in joules is required to raise the temperature of 250 g of mercury 52 oC?
A 1.55 g piece of stainless steel absorbs 141 J of heat when its temperature increases by 178 oC. What is the specific heat of the stainless steel?
23
5.2.1 Calculate the heat energy change when the temperature of a pure substance is changed.
How much heat in joules is required to raise the temperature of 250 g of mercury 52 oC?
q = m x c x ΔTq = ?m = 250 gc = 0.14 J g-1 oC-1 (Table
11.2)ΔT = 52 oC
q = 250 x 0.14 x 52 = 1800 J
A 1.55 g piece of stainless steel absorbs 141 J of heat when its temperature increases by 178 oC. What is the specific heat of the stainless steel?
q = m x c x ΔTq = 141 Jm = 1.55 gc = ?ΔT = 178 oC
141 = 1.55 x c x 178 = 0.511 J g-1 oC-1
24
5.2.2 Design suitable experimental procedures for measuring the heat energy changes of reactions.
Calorimeter: Reactions used to heat up an external source of water.
Temperature change of water, mass of material and mass of water are measured.
Use q = m x c x ΔT to solve for q then find the heat of reaction in kJ/mol of reacting substance.
25
CalorimetryCalorimetry
Calorimetry involves the measurement of Calorimetry involves the measurement of heat changes that occur in chemical heat changes that occur in chemical processes or reactions. processes or reactions. Determines
the ΔH by measuring temp Δ's created from the rxn
The heat change that occurs when a The heat change that occurs when a substance absorbs or releases energy is substance absorbs or releases energy is really a function of three quantities:really a function of three quantities: The massThe mass The temperature changeThe temperature change The heat capacity of the materialThe heat capacity of the material
25
26
Heat Capacity and Specific HeatHeat Capacity and Specific Heat
The ability of a substance to absorb or retain heat The ability of a substance to absorb or retain heat varies widely.varies widely.
The heat capacity depends on the nature of the The heat capacity depends on the nature of the material.material.
The The specific heatspecific heat of a material is the amount of of a material is the amount of heat required to raise the temperature of 1 gram of heat required to raise the temperature of 1 gram of a substance 1 a substance 1 ooC (or Kelvin)C (or Kelvin)
26
27
Heat Transfer Problem 2Heat Transfer Problem 2
What is the final temperature when 50 grams of water at What is the final temperature when 50 grams of water at 2020ooC is added to 80 grams water at 60C is added to 80 grams water at 60ooC? Assume that C? Assume that the loss of heat to the surroundings is negligible. The the loss of heat to the surroundings is negligible. The specific heat of water is 4.184 J g-1 specific heat of water is 4.184 J g-1 ooCC-1-1
Solution:Solution: Q (Cold) = Q (hot) mCT= mCT
Let T = final temperatureLet T = final temperature
(50 g) (4.184 J g(50 g) (4.184 J g-1-1 ooCC-1-1)(T- 20)(T- 20ooC)C) = (80 g) (4.184 J g= (80 g) (4.184 J g-1-1 ooCC-1-1)(60)(60ooC- T) C- T)
(50 g)(T- 20(50 g)(T- 20ooC) = (80 g)(60C) = (80 g)(60ooC- T) C- T) 50T -1000 = 4800 – 80T50T -1000 = 4800 – 80T 130T =5800130T =5800 T = 44.6 T = 44.6 ooCC
27
28
Using Thermochemical Equations
Calcium oxide combines with water to produce calcium hydroxide and heat (exothermic reaction).
CaO(s) + H2O(l) Ca(OH)2(s) + 65.2 kJ OR CaO(s) + H2O(l) Ca(OH)2(s) H = -65.2 kJ
How many kJ of heat are produced when 7.23 g of CaO react?1) Balance equation2) Moles CaO: 7.23 g/56.01 g/mol = 0.129 mol3) Ratio using heat: x kJ = 65.2 kJ
8.41 kJ0.129 CaO 1 CaO
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
29
Using Thermochemical Equations
Sodium hydrogen carbonate absorbs 129 kJ of energy and decomposes to sodium carbonate, water, and carbon dioxide (endothermic reaction).
2NaHCO3(s) + 129 kJ Na2CO3(s) + H2O(g) + CO2(g) OR 2NaHCO3(s) Na2CO3(s) + H2O(g) + CO2(g) H = 129 kJ
How many kJ of heat are needed to decompose 2.24 mol NaHCO3(s)?1) Balanced equation2) Moles NaHCO3(s) = 2.24 mol3) Ratio: x kJ = 129 kJ 144 kJ
2.24 NaHCO3(s) 2 mol
Do sample problems 13 & 14 on page 304Pg. 306: 15,16,18
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
30
Using Experimental Data
In a neutralization reaction, 25.0 mL of water containing 0.025 mol HCl is added to 25.0 mL of water containing 0.025 mol NaOH in a foam cup calorimeter. At the start, the solutions and the calorimeter are all at 25.0 oC. During the reaction, the highest temperature observed is 32.0 oC. Calculate the heat (in kJ) released during this reaction. Assume the densities of the solutions are 1.00 g mL-1.
Use q = m x c x ΔTm = mass of solution = 50.0 mL x 1.00 g mL-1 = 50.0 gC = 4.18 j g-1 oC-1
ΔT = 32.0 – 25.0 = 7.0 oCq = 50.0 g x 4.18 J g-1 oC-1 x 7.0 oC = 1463 J = 1.5 kJPg. 302: 11 & 12
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
31
32
Using Thermodynamic Quantities (Standard Heats of Formation)
Heat of reaction can be found by: sum the heats of formation of all the products – sum of heats of formation of all the reactants
Hrxn = Hf products – Hf reactants
Hf = standard enthalpy of formation. Energy required to form a compound from its elements.
“standard” is a term used a lot in chemistry. It usually means that the values are experimentally determined and compared to an agreed upon reference value
Since the Hf is given per mole, we must multiply by coefficients
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
33
Using Thermodynamic Quantities (Standard Heats of Formation)
Using the table of thermodynamic quantities, calculate the heat of reaction for 2SO2(g) + O2(g) 2SO3(g)
Heat of reaction = Hf products – Hf of reactantsHeat of products: Hf (SO3) = -395.2 kJ/mol x 2 = -790.4 kJ
Heat of reactants = Hf (SO2) + Hf (O2)(-296.9 kJ/mol x 2) + (0) = -593.8 KJ
Heat of reaction = -790.4 kJ – (-593.8 kJ) = -196.6 kJ
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
34
N2O4 + 3 CO N2O + 3CO2
Hf products = 1(81 kJ mol-1) + 3(-393 kJ mol-1) = -1098 kJ/mol
Hf reactants = 1(-9.7 kJ mol-1)+ 3(-110 kJ mol-1) = -320.3 kJ mol-1
Hf products – Hf reactants = (-1098 kJ mol-1) – (-320.3 kJ mol-1)
= -778 kJ mol-1
Hrxn = -778 kJ mol-1
Therefore it is exothermic
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
Reactants Hf Products Hf
N2O4 9.7 kJ mol-1 N2O 81 kJ mol-1
CO -110 kJ mol-1 CO2 -393 kJ mol-1
35
Ca(OH)2(s) + CO2 (g) H2O(g) + CaCO3 (s)
Hf products = 1(-241.8 kJ mol-1) + 1(-1206.9 kJ mol-1) = -1448.7 kJ/mol
Hf reactants = 1(-986.1 kJ mol-1)+ 1(-393.5 kJ mol-1) = -1379.6 kJ mol-1
Hf products – Hf reactants = (-1448.7 kJ mol-1) – (-1379.6 kJ mol-1)
= -69.1 kJ mol-1
Hrxn = -69.1 kJ mol-1
Therefore it is exothermic
5.2.3 Calculate the enthalpy change for a reaction using experimental data on temperature changes, quantities of reactants and mass of water.
Reactants Hf Products Hf
Ca(OH)2 -986.1 kJ mol-1 H2O -241.8 kJ mol-1
CO2 -393.5 kJ mol-1 CaCO3 -1206.9 kJ mol-1
36
IB Topic 5: Energetics5.3 Hess’s Law & 5.4 Bond Enthalpies
5.3.1 Determine the enthalpy change of a reaction that is the sum of two or three reactions with known enthalpy changes.
5.4.1 Define the term average bond enthalpy 5.4.2 Explain, in terms of average bond
enthalpies, why some reactions are exothermic and others are endothermic
37
5.3.1 Determine the enthalpy change of a reaction that is the sum of two or three reactions with known enthalpy changes.
Hess’s Law: Reactions can be added together in order to determine heats of reactions that can’t be measured in the lab.
C(diamond) C(graphite)This reaction is too slow to be measured in the lab. Two reactions
can be used that can be measured in the lab:a) C(graph) + O2(g) CO2(g) H = -393.5 kJ
b) C(diam) + O2(g) CO2(g) H = -395.4 kJ
Since C(graphite) is a product, write equation a) in reverse to give:c) CO2(g) C(graph) + O2(g) H = 393.5 kJ
Now add equations b) and c) together:C(diam) + O2(g) + CO2(g) C(graph) + O2(g) + CO2(g)
H = -395.4 kJ + 393.5 kJ = -1.9 kJ
Final equation: C(diamond) C(graphite) H = - 1.9 kJ
38
5.3.1 Determine the enthalpy change of a reaction that is the sum of two or three reactions with known enthalpy changes.
Given the following thermochemical equations, calculate the heat of reaction for:
C2H4(g) + H2O(l) C2H5OH(l)
a) C2H5OH(l) + 3O2(g) 2CO2(g) + 3H2O(l) H = -1367 kJ
b) C2H4(g) + 3O2(g) 2CO2(g) + 2H2O(l) H = -1411 kJ
39
5.3.1 Determine the enthalpy change of a reaction that is the sum of two or three reactions with known enthalpy changes.
Given the following thermochemical equations, calculate the heat of reaction for
C2H4(g) + H2O(l) C2H5OH(l)
a) C2H5OH(l) + 3O2(g) 2CO2(g) + 3H2O(l) H = -1367 kJ
b) C2H4(g) + 3O2(g) 2CO2(g) + 2H2O(l) H = -1411 kJ
Since C2H5OH(l) is a product, write equation a) in reverse order:
c) 2CO2(g) + 2H2O(l) C2H5OH(l) + 3O2(g) H = 1367 kJ
Add equations b) & c) together, cancelling out substances on opposite sides of the arrow. Add the heat values to obtain the heat of reaction.
C2H4(g) + H2O(l) C2H5OH(l) H = -44 kJ
40
5.3.1 Determine the enthalpy change of a reaction that is the sum of two or three reactions with known enthalpy changes.
Given the following thermochemical equations, calculate the heat of reaction for:
C(s) + 2H2(g) CH4(g)
a) C(s) + O2(g) CO2(g) H = -393 kJ mol-1
b) H2(g) + ½ O2(g) H2O(l) H = -286 kJ mol-1
c) CH4(g) + 2O2(g) CO2(g) + 2H2O(l) H = -890 kJ mol-1
41
5.3.1 Determine the enthalpy change of a reaction that is the sum of two or three reactions with known enthalpy changes.
Given the following thermochemical equations, calculate the heat of reaction for:
C(s) + 2H2(g) CH4(g)
C(s) + O2(g) CO2(g) H = -393 kJ
2(H2(g) + ½ O2(g) H2O(l)) H = 2(-286 kJ mol-1)
2H2(g) + O2(g) 2H2O(l)) H = -572 kJ
CH4(g) + 2O2(g) CO2(g) + 2H2O(l) H = -890 kJ mol-1
CO2(g) + 2H2O(l) CH4(g) + 2O2(g) H = 890
C(s) + 2H2(g) CH4(g) H = -75 kJ
42
5.4.1 Define the term average bond enthalpy
Enthalpy changes of reactions are the result of bonds breaking and new bonds being formed.
Breaking bonds requires energy Forming new bonds releases energy
Bond enthalpy is the energy change required to break 1 mol of bonds or form 1 mol of bonds between two covalently bonded atoms in the gaseous state.
Bond enthalpies for unlike atoms will be affected by surrounding bonds and will be slightly different in different compounds so average bond enthalpies are used.
43
Chemical ReactionsChemical Reactions
In a chemical reactionIn a chemical reaction Chemical bonds are brokenChemical bonds are broken Atoms are rearrangedAtoms are rearranged New chemical bonds are formedNew chemical bonds are formed These processes always involve These processes always involve
energy changesenergy changes
43
44
5.4.2 Bond Enthalpies5.4.2 Bond Enthalpies One approach to determining an enthalpy One approach to determining an enthalpy
change for a chemical reaction is to compute change for a chemical reaction is to compute the difference in bond enthalpies between the difference in bond enthalpies between reactants and productsreactants and products
The energy to required to break a covalent The energy to required to break a covalent bond in the gaseous phase is called a bond in the gaseous phase is called a bond bond enthalpy.enthalpy.
Bond enthalpy tables give the average energy Bond enthalpy tables give the average energy to break a chemical bond. Actually there are to break a chemical bond. Actually there are slight variations depending on the slight variations depending on the environment in which the chemical bond is environment in which the chemical bond is locatedlocated
44
45
Energy ChangesEnergy Changes
Breaking chemical bonds requires Breaking chemical bonds requires energyenergy
Forming new chemical bonds releases Forming new chemical bonds releases energyenergy
45
46
Bond Enthalpy TableBond Enthalpy TableThe average bond enthalpies for several types of The average bond enthalpies for several types of chemical bonds are shown in the table below:chemical bonds are shown in the table below:
46
47
Bond EnthalpiesBond Enthalpies Bond enthalpies can be used to calculate the Bond enthalpies can be used to calculate the
enthalpy change for a chemical reactionenthalpy change for a chemical reaction.. Energy is required toEnergy is required to break chemical bondsbreak chemical bonds. .
Therefore when a chemical bond is broken Therefore when a chemical bond is broken its its enthalpy changeenthalpy change carries a carries a positive signpositive sign..
Energy is released when chemical bonds Energy is released when chemical bonds formform. When a chemical bond is formed its . When a chemical bond is formed its enthalpy changeenthalpy change is expressed as a is expressed as a negative negative valuevalue
By combining the enthalpy required and the By combining the enthalpy required and the enthalpy released for the breaking and enthalpy released for the breaking and forming chemical bonds, one can calculate forming chemical bonds, one can calculate the enthalpy change for a chemical reactionthe enthalpy change for a chemical reaction
47
48
Exothermic and Endothermic Exothermic and Endothermic ProcessesProcesses
Exothermic processes release energyExothermic processes release energy
CC33HH88 (g) + 5 O (g) + 5 O22 (g) (g) 3 CO 3 CO22 (g) + 4H (g) + 4H22O (g)O (g)
+ 2043 + 2043 kJkJ
Endothermic processes absorb energy Endothermic processes absorb energy
C(s) + HC(s) + H22O (g) O (g) +113 kJ+113 kJ CO(g) + H CO(g) + H22 (g) (g)
48
49
Energy Changes in Energy Changes in endothermic and endothermic and exothermic processesexothermic processesIn an In an endothermic endothermic reaction there is reaction there is more energy more energy required to required to break bonds break bonds than is released than is released when bonds are when bonds are formed. formed.
The opposite is The opposite is true in an true in an exothermic exothermic reaction.reaction.
49
50
5.4.2 Explain, in terms of average bond enthalpies, why some reactions are exothermic and others are endothermic
If the amount of energy required to break the bonds in the reactants is greater than the amount of energy released when bonds are formed in the products, the reaction is endothermic.
average bond enthalpy reactants > average bond enthalpy products
If the amount of energy required to break the bonds in the reactants is less than the amount of energy released when bonds are formed in the products, the reaction is exothermic.
average bond enthalpy reactants < average bond enthalpy products
51
Use the following average bond enthalpies (kJ mol-1) to determine the heat of reaction for 3F2 + NH3 3HF + NF3
F-F = 158; N-H = 388; H-F = 562; N-F = 272
Energy in (kJ mol-1)3F-F is 3(158) + 3N-H is 3(388) = 1638 kJ
Energy out (kJ mol-1)3H-F is 3(562) + 3N-F is 3(272) = 2502 kJ
Since Energy in < Energy out, reaction is exothermic
Heat of reaction is -864 kJ mol-1
5.4.2 Explain, in terms of average bond enthalpies, why some reactions are exothermic and others are endothermic
52
Using the Bond Enthalpy Table, determine the heat of reaction for:CO(g) + 2H2(g) CH3OH
5.4.2 Explain, in terms of average bond enthalpies, why some reactions are exothermic and others are endothermic
53
Using the Bond Enthalpy Table, determine the heat of reaction for:CO(g) + 2H2(g) CH3OH
Energy in (kJ)1CO (triple bond) 1074 + 2H-H is 2(435) = 1944 kJ mol-1
Energy out (kJ)3C-H is 3(393) + 1C-O is 356 + 1 O-H is 464 = 1999 kJ mol-1
Since Energy in < Energy out, reaction is exothermicHeat of reaction is -55 kJ mol-1
5.4.2 Explain, in terms of average bond enthalpies, why some reactions are exothermic and others are endothermic
54
Bond Enthalpy Bond Enthalpy CalculationsCalculations
Calculate the enthalpy change for the Calculate the enthalpy change for the reaction Nreaction N22 + 3 H + 3 H22 2 NH 2 NH33
54
Bonds broken
1 N=N: = 9453 H-H: 3(435) = 1305 Total = 2250 kJ
Bonds formed
2x3 = 6 N-H: 6 (390) = - 2340 kJ
Net enthalpy change
= + 2250 - 2340 = - 90 kJ
55
In the 1960s NASA considered the relative merits of using hydrogen and oxygen compared with hydrogen and fluorine as rocket fuels. Assuming all the reactants and products are in the gaseous state, use bond enthalpies to calculate the enthalpy change of reaction (in kJ mol-1 of product) for both fuels. As mass is more important than amount in the choice of rocket fuels, which reaction would give more energy per kilogram of fuel?
Bond enthalpies (kJ mol-1):H-H: 435; O O: 496; H-O: 464 kJ; F-F: 158; H-F: 562
5.4.2 Explain, in terms of average bond enthalpies, why some reactions are exothermic and others are endothermic
56
Terms to Know
Endothermic Exothermic Temperature Heat Average bond enthalpy Standard enthalpy of formation Enthalpy of combustion Hess’ Law Standard conditions
top related