Transcript
group brandan GR
OU
P
adastra.avsl.com
Bringing sound to lifeCommercial public address solutions
RS605 5 CHANNEL SLAVE AMPLIFIER
POWER
CH1 CH2 CH3 CH4 CH5
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
Published July 2014
Synonymous with high quality, reliability and performance, Adastra has a long established reputation as a leading supplier of the latest 100V line, public address, background music, induction loop and zoning systems.
The complete commercial public address solution
adastra.avsl.com
INTRODUCTION
For over 60 years, Adastra has continued to provide a comprehensive range of products which offer versatile and cost effective solutions to cover a vast range of commercial and institutional installation applications.
Adastra products have been designed with ease of installation, setup and use in mind.
Exceptional reliability is one of the fundamental keys to Adastra’s success, and is something that hasn’t been compromised whilst maintaining the cost effectiveness of the products.
Whatever your requirements or application, Adastra has a quality, cost conscious solution for you.
1
Induction Loop Pages 33 - 34
Products to give people with hearing disabilities equal access to information and announcements, necessary in modern PA installations.
LA-600 INDUCTION LOOP AMPLIFIER
CH 1 CH 2
INPUTS EQ MASTER
CH 3 BASS TREBLE LOOP CURRENT
SIREN POWER
PEAK CURRENT
0 10 0 10 0 10 0
0
10-10 +10
0
-10 +10
3 4 5 6 7 8 9
Loudspeakers Pages 2 - 26
A wide range of speakers suitable for a variety of applications. Including ceiling, wall, pendant, background and horn speakers, plus mounting brackets.
Amplifiers & Mixers Pages 27 - 32
A selection of mixer amps and slave amps in various power ratings for 100V line or low impedance systems.
Accessories Pages 43 - 50
A wide range of accessories to complement the entire Adastra range. Including rack accessories and paging microphones.
Portable PA Pages 38 - 43
Megaphones and public address units ideal for compact and portable applications.
Technical Data Pages 51 - 56
Technical information and a glossary of terms.Visit our website for full technical data on all our products
CONTeNTS
RM60 MIXER AMPLIFIER
POWER
MASTER
TREBLEBASSLN5/USBLINE 4MIC/LINE 3MIC/LINE 2MIC 1
0 10 0 10 0 10 0 10 0 10 -10 +10 -10 +10
0
-5
-10
-15
-20
ON
USB/SD
REPEAT EQVOLUME
SD CARD INPUT
Zoning & Sound Sources Pages 35 - 37
Products for medium to large installations providing area zoning and sound sources for a complete solution.
RMC120 MIXER AMPLIFIER
POWER
MASTER 0-5
-10-15-20ON
TREBLE
-10 +10
BASS
-10 +10
LN5/CD
0 10
LINE 4
0 10
MIC/LINE 3
0 10
MIC/LINE 2
0 10
MIC 1
0 10
FM REPEAT
SKIP FOLDER
RANDOM CD/USB/SD
MUTE/ON/OFF
SD CARD INPUT
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
2
Icon Guide
LOUDSPeAKeRS | introduction
Loudspeakers With a wide range of low impedance, 100V line and active speakers, Adastra products cover environments and applications with a focus on clear and efficient sound delivery.
Find out more about low impedance, 100V line and active speaker systems at the back of this brochure.
Frequency graphs for these speakers are available on the website: adastra.avsl.com
CeilingA wide range of ceiling speakers suitable for a variety of domestic and commercial sites, indoor or outdoor.
Pages 3 - 9
Background & columnA variety of speakers ideal for background music in places such as bars, leisure centres and restaurants.
Pages 14 - 21
Pendants Suspended speakers that are ideal for places with high ceilings.
Page 10
Wall & cornerLow-profile in-wall and surface mounted speaker units.
Pages 11 - 13
Horns Weatherproof horn-loaded speaker units for sheltered and outdoor coverage.
Pages 23 - 26
Brackets Brackets to aid mounting and positioning of speakers.
Page 22
100V LINE
100V Line Weatherproof IP rating
Max. weight load
Gold plated connections
Quantity supplied in box
IP65GOLD PLATED
Double insulated
DOUBLE INSULATED
x2QTY
SUPPLIED
Low impedance
ΩLOW
IMPEDANCE
Dispersion angle
140ºDISPERSION 10kg
Max.weight
load
3
eXAMPLe SeT-UP
SL SerieS ceiLing SPeakerS | LOUDSPeAKeRS
SL SerieSSLIMLINE CEILING SPEAKERSHigh-grade ceiling speakers featuring hi-flex polypropylene cone main driver for extended low frequency response, and a mylar tweeter unit for accurate HF reproduction.
A flared wave-guide baffle helps to aid dispersion for wider coverage, and a precision 2-way filter network gives accurate high-low separation.
The twist-fit grille enables quick and neat installation resulting in a premium quality sound delivery system.
• Super-slim profile, great for discreet installations• Efficient 2-way crossover network• Gold-plated spring terminals• Sleek, understated profile• Flared baffle for wide dispersion• Fitted with 3-way “dog-ear” mounts
SL5 SL6Item ref 952.547 952.548Woofer 130mmØ (5.25“) PP cone 165mmØ (6.5“) PP coneTweeter 12mmØ (0.5“) mylar dome 12mmØ (0.5“) mylar domeDispersion angle 160° 160°Frequency response 50Hz - 20kHz 40Hz - 20kHzImpedance 8Ω 8ΩCrossover frequency 4.5kHz 4.5kHzPower rms 35W 40WCutout 178mmØ 204mmØMounting depth 93mm 102mmSPL @ 1W/1m 88dB 89dBDimensions 93 x 203mmØ 102 x 232mmØWeight 1.3kg 1.5kg
160ºDISPERSION
GOLD PLATED
203mmØ
93mm
Mounting depth
93mm
178mmØ
232mmØ
102mm
Mounting depth
102mm
204mmØ
4 SPeAKeR SeT-UP WIReD IN SeRIeS-PARALLeL4 x CEILING SPEAKERS SL5 Item ref: 952.547
AUDIO SOURCE AD100 Item ref: 952.979
AMPLIFIER RM120 Item ref: 953.111
SL5 SL6
ΩLOW
IMPEDANCE
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
4
C5D C6D C8D
202m
mØ
72mmMounting depth
83mm
166m
mØ
67mm
227m
mØ
79mmMounting depth
93mm
74mm
193m
mØ
271m
mØ
90mmMounting depth
238m
mØ
101mm
85mm
LOUDSPeAKeRS | directionaL ceiLing SPeakerS
CD SerieSDIRECTIONAL CEILING SPEAKERS
• 2-way easy fit ceiling speakers• Polypropylene woofer with rubber
surround and Ferrofluid cooled silk dome tweeter
• Adjustable directional tweeter• Spring-loaded
terminal connections• Fitted with “dog-ear” mounts
These easy fit ceiling speakers are ideal for main speakers, surround sound or remote speaker applications. The adjustable tweeter allows for the high frequencies to be focused in the direction of the listening area, this increases the flexibility when locating the speakers off-axis from the listeners.
C5D C6D C8DItem ref 952.528 952.534 952.543Woofer 130mmØ (5.25“) 165mmØ (6.5“) 200mmØ (8“)Tweeter 18mmØ (0.7“) 18mmØ (0.7“) 18mmØ (0.7“)Frequency response 85Hz - 20kHz 60Hz - 20kHz 45Hz - 20kHzImpedance 8Ω 8Ω 8ΩDispersion 155º 155º 155ºPower max 80W 100W 120WPower rms 40W 50W 60WCutout 166mmØ 193mmØ 238mmØMounting depth 72mm 79mm 90mmSPL @ 1W/1m 85dB (±2dB) 85dB (±2dB) 87dB (±2dB)Dimensions 83 x 202mmØ 93 x 227mmØ 101 x 271mmØWeight 850g 1.1kg 1.7kg
155ºDISPERSION
GOLD PLATED
SINGLe SPeAKeR SOUND SySTeMCEILING SPEAKER C8D Item ref: 952.543
AMPLIFIER CM60 Item ref: 953.101
eXAMPLe SeT-UP
ΩLOW
IMPEDANCE
5ceiLing SPeakerS | LOUDSPeAKeRS
160ºDISPERSION
GOLD PLATED C6S
227m
mØ
76mmMounting depth
86mm
71mm
193m
mØ
RC5
190m
mØ
54mmMounting depth
164m
mØ
60mm
52mm
• Stereo 2-way easy fit ceiling speaker with “dog-ear” mounts
• Dual mylar dome tweeters for separation and clarity
• Dual voice coil polypropylene woofer with rubber surround
• Gold-plated spring terminals• White ABS frame with steel grille
DUAL VOICE COIL CEILING SPEAKER A ceiling mount speaker that provides both left and right stereo channels from a single point, whilst maintaining channel separation.
The speaker has dual mylar dome tweeters combined with a dual voice coil, polypropylene woofer to deliver a full, rich sound. Ideal for installation in small rooms.
C6S
C6SItem ref 952.537Woofer 165mmØ (6.5“)Tweeter 2 x 20mmØ (0.75“)Dispersion angle 160ºFrequency response 70Hz - 20kHzPower max 50W + 50WPower rms 25W + 25WCutout 193mmØMounting depth 76mmImpedance 8ΩSPL @ 1W/1m 89dBDimensions 86 x 227mmØWeight 1.4kg
• 130mm (5”) polypropylene wide range speaker
• Fitted with “dog-ear” mounts for quick installation
• Fitted with attractive metal grille• Spring terminal connections
CEILING SPEAKERA wide range speaker with a 5” polypropylene cone with foam rubber surround to minimise distortion.
The housing is made from white ABS with a rigid steel grille also in white to mount discretely in a ceiling.
rC5
rC5Item ref 100.031Woofer 130mmØ (5“) PP coneDispersion angle 165ºFrequency response 100Hz - 12kHzPower max 35WPower rms 20WImpedance 8ΩCutout 170mmØMounting depth 54mmSPL @ 1W/1m 88dBDimensions 60 x 190mmØWeight 1.25kg
165ºDISPERSION
ΩLOW
IMPEDANCE
ΩLOW
IMPEDANCE
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
6
Fire domes to fit Adastra metal quick-fit ceiling speakers. These steel back housings create a fire-resisting barrier to protect the speaker and ceiling cavity in case of fire.
NOTE: Fire regulations for certain buildings may require fire domes to be fitted to ceiling speakers to help prevent the possible spread of fire from floor to floor and maintain the fire alert sound system.
eC5V eC6V eC8VItem ref 952.161 952.163 952.165Woofer 133mmØ (5.25“) 165mmØ (6.5“) 200mmØ (8“)Tweeter 38mmØ (1.5“) 38mmØ (1.5“) 44mmØ (1.75“)Dispersion angle 155º 155º 155ºFrequency response 165Hz - 20kHz 125Hz - 20kHz 97Hz - 20kHzPower max: 8Ω 60W 80W 100WPower rms: 8Ω 30W 40W 50WPower rms: 100V line 8W 8W 10WCutout 134mmØ 166mmØ 227mmØMounting depth 80mm 60mm 75mmSPL @ 1W/1m 84dB 85dB 90dBTappings 2, 4, 8W & 8Ω 2, 4, 8W & 8Ω 2.5, 5, 10W & 8ΩDimensions 83 x 160mmØ 68 x 200mmØ 84 x 265mmØWeight 500g 760g 1.34kg
FD5 FD6Item ref 952.166 952.167Suitable for EC5V (952.161) EC6V (952.163)Connection apertures 2 x 22mmØ knock-outMounting aperture 10mmØ knock-outDimensions 76 x 132mmØ 62 x 163mmØWeight 220g 280g
100V LINE155º
DISPERSION
LOUDSPeAKeRS | Quick-fit ceiLing SPeakerS | fire doMeS
160m
mØ
80mmMounting depth
134m
mØ
83mm
74mm
200m
mØ
60mmMounting depth
166m
mØ
68mm
54mm
265m
mØ
75mmMounting depth
227m
mØ
84mm
69mm
163mm
Ø
62mm
147mm
Ø
132mm
Ø113m
mØ
76mm
• Minimal profile for shallow cavities• Supplied with ceramic terminal block
Fire DOmeS
eC SerieSQUICK-FIT CEILING SPEAKERSMetal framed ceiling speakers with a quick-fit design, suitable for mounting into almost any material.
EC5V EC6V
FD5
EC8V
FD6
• All metal, flush fitted grille• Fitted with spring clips
for easy installation• Fitted with a quality speaker
and 100V line transformer
ΩLOW
IMPEDANCE
7
CC5V CC6V CC8V
ceiLing SPeakerS | LOUDSPeAKeRS
2-way quick fit ceiling speakers with bass driver and directional dome tweeter giving an excellent frequency response, all housed in a white polymer frame with metal grille.
CC SerieS2-WAY CEILING SPEAKERS
CC5V CC6V CC8VItem ref 952.184 952.153 952.155Woofer 133mmØ (5.25“) 165mmØ (6.5“) 200mmØ (8“)Tweeter 38mmØ (1.5“) 38mmØ (1.5“) 44mmØ (1.75“)Dispersion angle 160º 160º 160ºFrequency response 85Hz - 20kHz 70Hz - 20kHz 60Hz - 20kHzPower rms: 8Ω 50W 50W 60WPower rms: 100V line 20W 20W 50WCutout 166mmØ 193mmØ 238mmØMounting depth 84mm 90mm 95mmSPL @ 1W/1m 84dB (±2dB) 89dB (±2dB) 90dB (±2dB)Tappings 2.5, 5, 10, 15, 20W & 8Ω 2.5, 5, 10, 15, 20W & 8Ω 10, 20, 30, 40, 50W & 8ΩDimensions 88 x 202mmØ 100 x 227mmØ 102 x 271mmØWeight 1.15kg 1.25kg 1.85kg
• Rotary selector switch for 100V line tappings or 8Ω
• Fitted with “dog-ear” mounts for fixing to ceiling tiles 1-20mm in thickness
• Spring loaded terminals for easy connection
202m
mØ
84mmMounting depth
88mm
79mm
166m
mØ
227m
mØ
90mmMounting depth
193m
mØ
100mm
85mm
271m
mØ
95mmMounting depth
238m
mØ
102mm
90mm
100V LINE160º
DISPERSION
10 UNIT CeILING SPeAKeR ARRAy10 x CEILING SPEAKERS CC6V (Tapped at 10W each) Item ref: 952.153
AUDIO SOURCE M50 Item ref: 952.193
AMPLIFIER RM120 Item ref: 953.111
ΩLOW
IMPEDANCE
eXAMPLe SeT-UP
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
8
100mmMounting depth
100m
mØ
95mm
LOUDSPeAKeRS | ceiLing SPeakerS
METAL QUICK-FIT CEILING SPEAKER
• Easy quick-fit mechanism• Slimline flush fitting grille
Metal framed ceiling speaker with a quick-fit design, suitable for mounting into almost any material. All metal, flush fit grille fitted with quality speaker and 100V line transformer.
eC56V
Cm-VW Cm-VCItem ref 952.176 952.180Finish White ChromeSpeaker size 63mmØ (2.5”)Dispersion angle 120ºFrequency response 120Hz - 20kHzPower rms 6WImpedance 13k, 6.6k, 3.3k, 1.6kΩCutout 92mmØMounting depth 100mmSPL @ 1W/1m 85dBTappings 0.75W, 1.5W, 3W, 6WDimensions 95 x 100mmØWeight 650g
eC56VItem ref 952.168Woofer 135mmØ (5.25“)Dispersion angle 155ºFrequency response 110Hz - 13kHzPower rms 6WCutout 165mmØMounting depth 57mmSPL @ 1W/1m 90dB (±3dB)Tappings 1.5W, 3W, 6WDimensions 60 x 197mmØWeight 638g EC56V
197mmØ
57mm
Mounting depth
165mmØ
60mm
155ºDISPERSION100V LINE
• Ideal for boutiques, shops and hotel rooms• Easy 3 step fitting method• ABS body with metal grille• 4 wattage tappings
COMPACT CEILING SPEAKERSCompact ceiling speakers designed to match the design of low voltage light fittings. Their compact size allows them to be fitted in almost any location, especially where space is limited.
Cm SerieS
120ºDISPERSION100V LINE
DISCReeT CeILING SPeAKeR ARRAy8 x CEILING SPEAKERS CM-VW Item ref: 952.176
AUDIO SOURCE AD-200 Item ref: 952.980
AMPLIFIER RM60 Item ref: 953.110
CM-V
eXAMPLe SeT-UP
9Marine SPeakerS | LOUDSPeAKeRS
OD6
180m
mØ
65mmMounting depth
84.5mm
132m
mØ
OD5
148m
mØ
56mmMounting depth
72.5mm
112m
mØ
OD5-W4 OD5-W8 OD6-W4 OD6-W8 OD6-B8Item ref 125.030 125.032 125.061 125.063 125.050Colour White White White White BlackImpedance 4Ω 8Ω 4Ω 8Ω 8ΩSpeaker size 130mmØ (5”) 165mmØ (6.5”)Tweeter 50mm (2”) 50mm (2”)Dispersion angle 140º 140ºFrequency response 100Hz - 20kHz 80Hz - 20kHzPower max. 80W 100WPower rms 35W 40WCutout 112mmØ 132mmØMounting depth 56mm 65mmIP rating IP35 IP35Temperature range -20 - 85°C -20 - 85°CHumidity max. 95% 95%SPL @ 1W/1m 86dB 87dBDimensions 72.5 x 148mmØ 84.5 x 180mmØWeight 565g 745g
x2QTY
SUPPLIED140º
DISPERSIONIP35
OD SerieSWATER RESISTANT SPEAKERS
• 2-way speakers• 5mm (2”) tweeter
with mylar cone• IP35 rated• Plastic enclosure• Spade terminal
connections (6mm)
• Woofer with polypropylene cone
• Built-in crossover• Includes fixing kit• Gasket included• Supplied in pairs
A range of water resistant speakers for panel mounting, suitable for PA installations in swimming pools, bathrooms etc.
ΩLOW
IMPEDANCE
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
10
PS50-W PS50-B PS65-W PS65-BItem ref 952.426 952.427 952.429 952.430Colour White Black White BlackSpeaker size 125mm (5“) 125mm (5“) 165mm (6.5“) 165mm (6.5“)Dispersion angle 140° 140° 140° 140°Power rms @ 8Ω 20W 20W 30W 30WFrequency response 50Hz - 20kHz 50Hz - 20kHz 40Hz - 20kHz 40Hz - 20kHzImpedance : 100V 500, 1k, 2k, 4kΩ 500, 1k, 2k, 4kΩ 333, 666, 1.3k, 2.6kΩ 333, 666, 1.3k, 2.6kΩTappings 20W, 10W, 5W, 2.5W & 8Ω 20W, 10W, 5W, 2.5W & 8Ω 30W, 15W, 7.5W, 3.75W & 8Ω 30W, 15W, 7.5W, 3.75W & 8ΩSPL @ 1W/1m 89dB 89dB 88dB 88dB
Dimensions 180 x 245mmØ 180 x 245mmØ 195 x 270mmØ 195 x 270mmØ
Weight 2.366kg 2.366kg 2.916kg 2.916kg
WIDE DISPERSION PENDANT SPEAKERS
• Supplied with 4.5m cable and cable hook for hanging
• Selector for 4 x 100V line tappings & 8Ω
Wide dispersion spheroid 2-way pendant speakers for use with high ceilings where regular ceiling speakers would be positioned too high to be efficient.
Each has a rotary switch on top for selecting 100V line tappings and 8Ω operation.
PS SerieS
LOUDSPeAKeRS | Pendant SPeakerS
100V LINEDOUBLE
INSULATED140º
DISPERSION
PS65
270mmØ
195mm
188mmØ
PS50
245mmØ
180mm
168mmØ
100V.Line
20 W
10W
5W
2.5W
OFF8Ω
100V.Line
30 W
15W
7.5W
3.75W
OFF8Ω
MULTI-LeVeL PeNDANT SPeAKeR ARRAy
5 x HIGH LEVEL SPEAKERSPS-50W Pendant speakers (each tapped at 20W)Item ref: 952.426
10 x LOW LEVEL SPEAKERSPS-50W Pendant speakers (each tapped at 10W)Item ref: 952.426
AUDIO SOURCE M50 Item ref: 952.193
AMPLIFIER RM240S Item ref: 953.112
ΩLOW
IMPEDANCE
eXAMPLe SeT-UP
11in-waLL SPeakerS | LOUDSPeAKeRS
iW5Item ref 100.032Woofer 130mmØ (5“)Tweeter 40mm (1.75”)Dispersion angle 165ºFrequency response 100Hz - 17kHzImpedance 8ΩPower max. 50WCutout 205 x 140mmMounting depth 52mmSPL @ 1W/1m 89dBDimensions 235 x 170 x 60mmWeight 1.6kg
IW5
170mm
235mm
52mmMounting depth
60mm140mm
130mmØ
205mm
iW5IN-WALL SPEAKER
• 2-way speaker• Poly-carbonate tweeter• Fitted with “dog-ear” mounts for
quick installation• Fitted with attractive metal grille• Spring terminal connections
A 2-way speaker with a built-in crossover, woofer with polypropylene cone and foam rubber surround to minimise distortion. The housing is made from white ABS with a rigid steel grille also in white to sit discreetly in a wall or ceiling.
165ºDISPERSION
ΩLOW
IMPEDANCE
Visit Adastra’s dedicated website!adastra.avsl.com
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
12
WIDe COVeRAGe CORNeR AND PeNDANT ARRAy SySTeM
CB40VCORNER WALL-MOUNT BACKGROUND SPEAKERS
• Wide lateral dispersion pattern• Supplied with discreet moulded
mounting bracket• Full range, high quality reproduction• Tappings for 100V or 4Ω operation
A dual driver dispersion speaker in a curved ABS enclosure. 2 main drivers are set at a 50° angle and a silk dome tweeter disperses outward from the centre.
The removable front grille frame reveals the 3 drivers, tuning port and rotary tapping switch for 100V level settings and 4Ω operation.
Can be mounted in corners individually, mid-wall in pairs or suspended in fours for pendant-style arrays. A versatile solution for background music and indoor public address.
CB40V-W CB40V-BItem ref 952.133 952.134Finish White BlackWoofer 2 x 90mm (3.5”) reinforced conesTweeter 25mm (1”) silk domeDispersion angle 140ºFrequency response 70Hz - 16kHzPower rms 40WSPL @ 1W/1m 87dB (±3dB)Impedance : 100V 250, 500, 1k, 2kΩTappings 40W, 20W, 10W, 5W & 4ΩDimensions 380 x 140 x 265mmWeight 3.44kgCB40V
380mm
140mm
265mm
SPEAKERS 2 x CB40V-W (Tapped at 20W each) Item ref: 952.133
8 x CB40V-W (Tapped at 40W each) Item ref: 952.133
AUDIO SOURCE AD-200 Item ref: 952.980
AMPLIFIER RM60 Item ref: 953.110
2 x SLAVE AMPS RS240 Item ref: 953.121
140ºDISPERSION100V LINE
ΩLOW
IMPEDANCE
LOUDSPeAKeRS | corner SPeakerS
eXAMPLe SeT-UP
13
CSP5V
146mm
190mm
250mm
CSP5VCORNER SOUND PROJECTOR
• Wide dispersion corner mount design• Tappings for 100V or 8Ω operation• Full range output for background music• Supplied with discreet moulded
mounting bracket
Curved ABS sound projector with a main driver and a cone tweeter with horn flare.
A detachable rear corner bracket facilitates easy fixing into corners and conceals cable entry point. Applications include background music and general indoor public address. Can be mounted in corners, as pairs against a flat wall.
corner ProJectorS | LOUDSPeAKeRS
CSP5V-W CSP5V-BItem ref 952.146 952.147Finish White BlackWoofer 135mm (5.25") polypropylene coneTweeter 12mm (0.5") mylar domeDispersion angle 140°Frequency 90Hz - 21kHzPower 60W max. 30WrmsSPL @ 1W/1m 89dB (±3dB)Tappings 30W, 15W, 7.5W, 3.75W & 8ΩImpedance 166, 333, 666, 1.3k, 2.6k & 8ΩDimensions 300 x 230 x 185mmWeight 1.85kg
100V LINE
ΩLOW
IMPEDANCE140º
DISPERSION
x2QTY
SUPPLIED
CEILING ARRAY BRACKETS
• Ideal solution for central clusters
Pair of mounting brackets for suspending from a ceiling to hold 4 Adastra CB40V corner speakers on each.
Fixing plate and drop pole included or can be suspended from 10mm threaded rod.
CB404Item ref 952.132Plate size 144 x 100mm
Pole size M10 x 230mm
Max. weight load (each) 13.76kgDimensions (each) 144 x 353 x 100mmWeight (each) 549g
x2QTY
SUPPLIED13.76kg
Max.weight
load
32mm
2.5mm
M10 x 230mm
32mm32mm
100mm 144mm
140mm
230mm
32m
m
32mm
2.5mm
M10 x 230mm
32mm32mm
100mm 144mm
140mm
230mm
32m
m
CB404
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
14
BC4A
148mm
220mm
175mm155mmBC4A-W BC4A-B
Item ref 170.145 170.146Finish White BlackPower supply 18Vdc 1.0A adaptor (supplied)Woofer 100mmØ (4”) PP coneTweeter 25mm (1”) balanced domeDispersion 150° (-3dB)Freq response 120Hz - 20kHzPower rms 2 x 8WControls Combined On/Off + volume rotaryInput connections 3.5mm stereo and L+R RCADimensions (each) 155 x 220 x 148mmWeight (per set) 2.79kg
x2QTY
SUPPLIED150º
DISPERSION
BC4AACTIVE SPEAKER SETS
• Adjustable wall-mount brackets included• 3m satellite speaker wire supplied
Stereo active speaker set comprising of an active speaker and a passive satellite contained in durable ABS cabinets and coated steel mesh grilles. Each unit is wall-mountable and powered via an external power adaptor.
An easy and cost effective solution for background music, perimeter sound or small zone area.
BC5A
180mm
240mm
175mm155mm
BC5A-S BC5A-W BC5A-BItem ref 170.164 170.165 170.166Finish Silver White BlackPower supply 230Vac, 50Hz (fig 8)Woofer 133mmØ (5.25”) PP coneTweeter 25mm (1”) balanced domeDispersion 145°Freq response 60Hz - 20kHzPower rms 2 x 30WSPL @ 1W/1m 89dBDimensions 240 x 180 x 155mmWeight 4.6kg
BC5AACTIVE BACKGROUND SPEAKERS
• Magnetically shielded• Supplied with 4m speaker link cable• 1.5m Fig.8 mains lead included• Supplied with mounting brackets
2-way active monitor speaker set comprising a powered unit with stereo amp module and a satellite passive unit.
Designed for nearfield monitoring, home entertainment or as a small active background music system.
x2QTY
SUPPLIED
LOUDSPeAKeRS | Background SPeakerS
15Background SPeakerS | LOUDSPeAKeRS
FC4V
FC5V
245mm
140mm
180mm
270° pivot
185mm
110.5mm
200.5mm
155mm
150.5mm
270° pivot
FC4V-W FC4V-B FC5V-W FC5V-BItem ref 952.962 952.964 952.965 952.960Finish White Black White BlackWoofer 100mmØ (4”) PP cone 133mmØ (5.25”) PP coneTweeter 13mm (0.5”) PEI dome 13mm (0.5”) PEI domeIP rating IP44 IP44Freq response 130Hz - 20kHz 80Hz - 20kHzPower rms 20W 50WSPL @ 1W/1m 87dB 88dBTappings 2.5W, 5W, 10W, 20W & 8Ω 5W, 10W, 20W, 40W & 8ΩDimensions 200.5 x 150.5 x 155mm 245 x 185 x 180mmWeight 1.36kg 2.7kg
DOUBLE INSULATED
x1QTY
SUPPLIED
GOLD PLATED
10 SPeAKeR MUSIC & PUbLIC ADDReSS SySTeM
FCV SerieS
• 2-way speaker system with crossover network• Rotary selector switch for 100V line tappings or 8Ω operation• UV protected ASTM D4329• Equalisation switch boosts higher frequencies when outside• Gold plated spring terminal connections• Mounting bracket included• Optional mounting by M6 screw sockets
100V LINE COMPACT BACKGROUND SPEAKERS2-way compact speakers with weatherproof moulded cabinets, making them ideal for gardens, outdoor shelters, health club spa areas and marine applications.
10 x SPEAKERS (tapped at 20W) FC4V-W Item ref: 952.962
AUDIO SOURCE M49 Item ref: 952.190
AMPLIFIER RM240SItem ref: 953.112
100V LINE
IP44
145ºDISPERSION
ΩLOW
IMPEDANCE
eXAMPLe SeT-UP
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
16
BC SerieS
270º pivot
PASSIVE BACKGROUND SPEAKERS
• Features a polypropylene woofer• Complete with mounting brackets• Optional mounting by M6 screw sockets• Gold-plated spring terminal connectors• Note: Connecting leads not supplied
A range of compact 2-way stereo speakers, with ABS enclosures and sturdy metal grilles. Suitable for free standing or wall mounting via adjustable fixing bracket.
The trapezoidal design allows for the enclosures to be mounted neatly into corners, making them ideal for Hi-Fi and surround sound applications.
LOUDSPeAKeRS | Stereo Background SPeakerS
BC3W BC3B BC4W BC4B BC5W BC5B BC6W BC6B BC8W BC8BItem ref 100.898 100.899 100.901 100.902 100.904 100.905 100.907 100.908 100.910 100.911Finish White Black White Black White Black White Black White BlackWoofer 75mmØ (3“) 100mmØ (4”) 130mmØ (5.25”) 165mmØ (6.5”) 200mmØ (8”)
Tweeter 50mmØ (2“) Polymer HF unit
25mmØ (1”) balanced dome
25mmØ (1”) balanced dome
25mmØ (1”) silk dome
25mmØ (1”) silk dome
Frequency response 120Hz - 20kHz 110Hz - 20kHz 100Hz - 20kHz 80Hz - 20kHz 50Hz - 20kHzImpedance 8Ω 8Ω 8Ω 8Ω 8ΩPower rms 30W 35W 45W 60W 90WSPL @ 1W/1m 88dB 88dB 88dB 89dB 89dBDimensions (each) 106 x 153 x 98mm 195 x 150 x 150mm 235 x 180 x 175mm 280 x 220 x 210mm 280 x 374 x 257mmWeight (each) 840g 1.25kg 2.0kg 2.5kg 5.26kg
GOLD PLATED
x2QTY
SUPPLIEDDOUBLE
INSULATED145º
DISPERSION
180mm
235mm
175mm155mm
BC5 / BC5V / BP5V
150mm
195mm
150mm130mm
BC4 / BC4V / BP4V
106mm
153mm
98mm78mm
BC3 / BC3V / BP3V
ΩLOW
IMPEDANCE
17100V Line indoor SPeakerS | LOUDSPeAKeRS
220mm
280mm
210mm190mm
BC6 / BC6V / BP6V
280mm
374mm
257mm237mm
BC8
• 2 way speaker system with crossover network• Rotary selector switch for 100V line tappings or 8Ω operation• Wall mounting bracket supplied• Alternative M6 threaded mounting points• Spring terminal connection• Supplied singly
BCV SerieS100V INDOOR SPEAKERSA range of indoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for free standing or wall mounting via adjustable fixing bracket.
The trapezoidal design allows for the enclosures to be mounted neatly into corners, making them ideal for most applications
270º pivot
BC3V-W BC3V-B BC4V-W BC4V-B BC5V-W BC5V-B BC6V-W BC6V-BItem ref 952.710 952.711 952.712 952.713 952.714 952.715 952.716 952.717Finish White Black White Black White Black White BlackWoofer 75mmØ (3“) 100mmØ (4”) 130mmØ (5.25”) 165mmØ (6.5”)Tweeter 12mmØ (0.5“) Polymer HF unit 25mmØ (1”) balanced dome 25mmØ (1”) balanced dome 25mmØ (1”) balanced domeFrequency response 120Hz - 20kHz 110Hz - 20kHz 100Hz - 20kHz 90Hz - 20kHzPower max: 8Ω 60W 70W 90W 120WPower rms: 8Ω 30W 35W 45W 60WSPL @ 1W/1m 87dB 88dB 89dB 89dBTappings 6W, 3W, 1.5W & 8Ω 20W, 10W, 5W, 2.5W & 8Ω 30W, 20W, 10W, 5W & 8Ω 30W, 20W, 10W, 5W & 8ΩImpedance : 100V 1.6k, 3.3k, 6.6kΩ 500, 1K, 2k, 4kΩ 500, 1k, 2k, 4kΩ 500, 1k, 2k, 4kΩDimensions (each) 106 x 153 x 98mm 150 x 195 x 150mm 180 x 235 x 175mm 220 x 280 x 210mmWeight (each) 900g 1.63kg 2.38kg 3.08kg
100V LINEDOUBLE
INSULATED
x1QTY
SUPPLIED145º
DISPERSION
ΩLOW
IMPEDANCE
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
18 LOUDSPeAKeRS | Background SPeakerS
WPS4Item ref 952.518
Woofer 100mmØ (4”)
Tweeter 20mm (0.75”)Freq response 80Hz - 20kHzImpedance 8ΩPower rms 30WSPL @ 1W/1m 88dBIP rating IP35Dimensions 135 x 205 x 136mmWeight 1.4kg
135mm 160mm
136mm
205mm
163mm
239mm
WPS4
WPS4INDOOR/OUTDOOR SPEAKERSThese two-way, weather resistant speakers are suitable for indoor and outdoor applications. These speakers will excel as a straightforward stereo pair, for multimedia or as part of a surround sound system. Despite their compact size, these speakers can deliver a full sounding output. Supplied with wall-mount brackets.
• Polypropylene housing with aluminium grille
• Polypropylene woofer • Fluid cooled polycarbonate tweeter• Gold-plated compression terminal posts
x2QTY
SUPPLIED
GOLD PLATEDIP35
140ºDISPERSION
ΩLOW
IMPEDANCE
BP3V-W BP3V-B BP4V-W BP4V-B BP5V-W BP5V-B BP6V-W BP6V-BItem ref 952.810 952.811 952.812 952.813 952.814 952.815 952.816 952.817Finish White Black White Black White Black White BlackWoofer 75mmØ (3“) 100mmØ (4”) 130mmØ (5.25”) 165mmØ (6.5”)Tweeter 12mmØ (0.5“) Polymer HF unit 25mmØ (1”) balanced dome 25mmØ (1”) balanced dome 25mmØ (1”) balanced domeFrequency response 120Hz - 20kHz 110Hz - 20kHz 100Hz - 20kHz 90Hz - 20kHzPower max: 8Ω 60W 70W 90W 120WPower rms: 8Ω 30W 35W 45W 60WSPL @ 1W/1m 87dB 88dB 89dB 89dBTappings 6W, 3W, 1.5W & 8Ω 20W, 10W, 5W & 8Ω 30W, 20W, 10W, 5W & 8Ω 40W, 20W, 10W, 5W & 8ΩImpedance : 100V 1.6k, 3.3k, 6.6kΩ 500, 1k, 2kΩ 333, 500, 1k, 2kΩ 250, 500, 1k, 2kΩDimensions (each) 106 x 153 x 98mm 150 x 195 x 150mm 180 x 235 x 175mm 220 x 280 x 210mmWeight (each) 900g 1.63kg 2.38kg 3.08kg
270º pivotIP54DOUBLE
INSULATED
x1QTY
SUPPLIED100V LINE145º
DISPERSION
ΩLOW
IMPEDANCE
BPV SerieS100V WEATHERPROOF SPEAKERSA range of indoor/outdoor speakers, with ABS enclosures and a sturdy metal grille. Suitable for wall mounting via adjustable fixing bracket.
Weatherproof design makes these speakers ideal for outdoor music and public address applications.
• Water resistant PP cone main driver• Rotary selector switch for 100V line
tappings or 8Ω operation• Wall mounting bracket supplied
• Alternative M6 threaded mounting points
• 1m hard-wired speaker cable connected
• Supplied singly
19Background SPeakerS | LOUDSPeAKeRS
C25VMINI BACKGROUND SPEAKERSA pair of background speakers in a compact moulded enclosure for 100V or 8Ω operation. Ideal for surround sound and discreet installations in combination with a sub cabinet.
C25V-W C25V-BItem ref 952.820 952.821Finish White BlackWoofer 65mmØ (2.5”) reinforced paper coneFrequency response 150Hz - 22kHzPower max. @ 8Ω 30WPower rms @ 8Ω 15WPower rms @ 100V line 6WSPL @ 1W/1m 88dBDimensions 89 x 111 x 90mmWeight 465g
• Adjustable wall brackets supplied• 100V or 8Ω operation
130ºDISPERSION
x2QTY
SUPPLIED100V LINE
111mm
89mm
90mm
C25V
ΩLOW
IMPEDANCE
FSV100V LINE HIGH PERFORMANCE BACKGROUND SPEAKERSHigh quality 2-way speakers for indoor or outdoor use. The speaker cabinet makes them ideal for outdoor events, swimming pools, garden areas and marine or boat use.
FSV-W FSV-BItem ref 952.961 952.963Finish White BlackWoofer 133mmØ (5.25”)Tweeter 13mmØ (0.5”)Dispersion angle 145ºIP rating IP35Frequency response 125Hz - 20kHzPower rms @ 8Ω 65WSPL @ 1W/1m 88dB
Tappings 40W, 20W, 10W, 5W & 8ΩImpedance : 100V 250, 500, 1k, 2kΩDimensions 252 x 177 x 142mmWeight 3.06kg
• 2 way speaker system with crossover network
• Rotary selector switch for 100V line tappings or 8Ω operation
• UV protected ASTM D4329• Indoor/outdoor equalisation switch
• Gold plated binding posts• Mounting bracket• Optional mounting
by M6 screw sockets
FSV
252mm
142mm
186mm
177mm
DOUBLE INSULATED
x1QTY
SUPPLIED
GOLD PLATEDIP35100V LINE
145ºDISPERSION
ΩLOW
IMPEDANCE
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
20 LOUDSPeAKeRS | Background SPeakerS | Sound ProJectorS
B30V100V LINE BACKGROUND SPEAKERS
• Supplied in pairs with mounting brackets for horizontal or vertical use
• 3-way speaker design with bass reflex
A powerful 3-way speaker set for surround and monitoring applications. Fitted with a rotary switch for 4 x 100V line tappings or 8Ω operation.
B30V-B B30V-WItem ref 952.887 952.888Finish Black WhitePower handling 60W max.Woofer 100mm (4”) PP coneMid driver 50mmØ (2”) PP coneTweeter 13mm (0.5”) domeFreq response 120Hz-20kHzSensitivity 87dBTappings 30W, 20W, 10W, 5W & 8ΩDimensions (each) 136 x 240 x 155mmWeight (per set) 3.26kg
140mm
150mm
130mm
210mm
240mm
B30V
WSP25SOUND PROJECTORS
• Adjustable steel mounting bracket• Weatherproof ABS enclosure
Weatherproof sound projectors with injection-moulded body and coated steel grille. Suitable for indoor or outdoor music and speech applications. Fitted with a multi-core cable input for different power ratings. The transformer may be bypassed internally to give an 8Ω, 25W load.
WSP25-W WSP25-BItem ref 952.942 952.943 Finish White BlackWoofer 165mmØ (6.5“) reinforced coneTweeter Concentric 25mm (1“) mylar domeFreq response 100Hz - 17kHzPower 25W @ 8ΩSPL @ 1W/1m 92dBTappings 5W, 10W, 20WDimensions 245 x 177mmØWeight 1.55kg
245mm
35mm clearance
cableentry
177mm
Ø
WSP25
100V LINEDOUBLE
INSULATED IPX590º
DISPERSION
ΩLOW
IMPEDANCE
100V LINEDOUBLE
INSULATED
x2QTY
SUPPLIED150º
DISPERSION
ΩLOW
IMPEDANCE
GOLD PLATED
21
150mm 150mm
890m
m
450m
m13
0mm
cableentry 105mm
410m
m
105mm
700m
m
HC15-V HC30-VItem ref 952.170 952.173Speaker size 2 x 150 x 100mm (6 x 4”) 4 x 150 x 100mm (6 x 4”)IP rating IP65 IP65Freq response 150Hz - 10kHz 150Hz - 10kHzPower rms 15W 30WSPL @ 1W/1m 94dB 97dB
Impedance 670, 1k, 2k, 4kΩ 333, 500, 1k, 2kΩ
Tappings 2.5W, 5W, 10W, 15W 5W, 10W, 20W, 30WDimensions 450 x 150 x 130mm 890 x 150 x 130mmWeight 4.5kg 7kg
SC16V SC32VItem ref 952.241 952.243Speaker size 4 x 63mmØ (2.5”) 8 x 63mmØ (2.5”)Freq response 200Hz - 16kHz 200Hz - 16kHzPower rms 16W 32WSPL @ 1W/1m 91dB 93dB
Impedance : 100V 833, 1.6k, 3.3k,6.6kΩ 500, 1k, 2k, 4kΩ
Tappings 12W, 6W, 3W, 1.5W, 8Ω 20W, 10W, 5W, 2.5W, 4ΩDimensions 105 x 410 x 90mm 105 x 700 x 90mmWeight 2.3kg 3.8kg
110ºDISPERSION100V LINE
DOUBLE INSULATED IP65
160ºDISPERSION100V LINE
DOUBLE INSULATED
HEAVY-DUTY COLUMN SPEAKERSHeavy-duty column speakers suitable for indoor and outdoor use. The extruded aluminium casings with cast aluminium end plates are fully dust and weatherproof.
Fitted with high quality elliptical speakers and a 100V line transformer.
SLIMLINE COLUMN SPEAKERSSlimline column speakers suitable for indoor applications, especially where discretion is a necessity. Made from extruded aluminium with a white protective finish, fitted with white metal grilles and white plastic end caps.
Fitted with high quality speakers providing crisp, clear sound reproduction and a 100V line transformer.
• Fitted with 600mm of connecting cable• Supplied with strong mounting brackets• Integral rotary switch for tapping selection
• Fitted with 900mm of connecting cable
• Supplied with mounting brackets• Adjustable volume tappings
HC SerieS SC SerieS
coLuMn SPeakerS | LOUDSPeAKeRS
Tappings & cable entry
on rear of unit
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
22
ADJUSTABLE SPEAKER BRACKETS
• Adjustable in 180° plane with swivel mount plate
• Strong metal construction• Safety cable supplied
Adjustable speaker brackets for wall or ceiling mounting.
ADJUSTABLE SPEAKER BRACKETS
• Multi-directional ball joint mount
• Strong metal construction
• Safety cable supplied
Adjustable speaker brackets for wall or ceiling mounting.
103.012Speaker fixing centres 64mm & 72 x 35mm
Wallplate fixing centres 87.5 x 82mm
Max. weight load (each) 5kgDimensions (each) 105 x 100 x 115mmWeight (each) 125g
103.015Speaker fixing centres 70-80mm
Wallplate fixing centres 87.5 x 82mm
Max. weight load (each) 5kgDimensions (each) 105 x 100 x 115mmWeight (each) 125g
x1QTY
SUPPLIED
x2QTY
SUPPLIED5kg
Max.weight
loadx2QTY
SUPPLIED5kg
Max.weight
load
129.130 129.131 129.133 129.134Finish White Black White BlackSize Small LargeTilt Range 43° 37°Max load 1.61kg 3.03kgSwivel 43° 37°Dimensions 48 x 58.2mmØ 61 x 78.2mmØWeight 600g 800g
SWIVEL SPEAKER BRACKETSUNIVERSAL SPEAKER BRACKETSA range of universal easily adjustable speaker wall brackets.
Once your speaker is fitted to the bracket, you can use the brackets ball and socket joint to rotate it 360° in the vertical plane and up to 90° in the horizontal.
When your speaker is set up at the exact angle that you want for it, simply tighten the bolt to safely lock it into place.
These universal speaker wall mounts are designed to work with all types of small home cinema and surround sound satellite speakers. The brackets can swivel left and right and tilt up or down allowing for optimum positioning.
LargeSmall
61m
m
78.2mm
51mm
41m
m
48m
m
58.2mm
39mm
31.6
mm
Supplied with 3 sizes of swivel arms:85mm right angled 50mm right angled 20mm straight
129.207 129.208Finish Black WhiteWallplate fixing centres 62mm 62mmMax load 3.5kg 3.5kgMounting dimensions 72 x 38 x 42mm 72 x 38 x 42mmWeight 177g 177g
x2QTY
SUPPLIED3.5kg
Max.weight
load
LOUDSPeAKeRS | BracketS
23HornS | LOUDSPeAKeRS
CH15 CH40Item ref 952.237 952.231Frequency response 300Hz - 8kHz 250Hz - 6kHzPower rms 15W 40WSPL @ 1W/1m 100dB 106dB
Impedance 8Ω 8ΩDimensions 200 x 210mmØ 288 x 305mmØWeight 850g 1.9kg
LOW IMPEDANCE HORNSAn all metal range of low impedance round PA horns for general purpose and contract industrial installations.
Made from aluminium and fitted with sturdy steel adjustable mounting brackets and 120mm of good quality two core speaker cable.
CH SerieS
CAR ROOF HORN SPEAKER
• Plastic, rectangular horn• Metal mounting bracket with
rubber suction pad for easy fitting• Weatherproof• 400mm connection lead
A horn speaker designed for car rooftop installation. Ideal for election campaigns and promotions.
CrH30
IP66
CrH30Item ref 952.306IP rating IP66Freq response 400Hz - 8kHzPower rms 30WSPL @ 1W/1m 102dB
Impedance 8ΩDimensions 234 x 126 x 235mmWeight 1.6kg
MPA12 MOBILE PA AMPLIFIER POWER
AUXMICAUXMIC SIREN
FOG
Compatible vehicle amplifierItem ref: 952.439
See page 30
120ºDISPERSION
IP33125º
DISPERSION
ΩLOW
IMPEDANCE
ΩLOW
IMPEDANCE
Cable entry on rear of unit
Cable entry on underside of unit
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
24
Cable entry on underside of unit
LOUDSPeAKeRS | HornS
rH SerieSHEAVY DUTY RECTANGULAR HORN SPEAKERSA range of heavy duty, high quality rectangular PA horn speakers. Made from robust ABS material offering maximum protection against shock and weather. Ideal for mounting in extreme conditions (eg: on vehicles, boats or in exposed outdoor installations). 100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.
• 270° adjustable mounting bracket
• Supplied with 600mm double insulated connecting cable
• Fitted with high quality aluminium voice coils
• Note: 952.095 (8Ω only)
FrH50FULL RANGE HORN SPEAKER
• Full range music quality output• Long throw coverage
ABS full range horn speaker housed in a weatherproof, UV stabilised polymer enclosure.
Unlike standard outdoor horn speakers, this powerful unit has a full range output and is therefore suitable for background music as well as public address.
rH15 rH15V rH25V rH40VItem ref 952.095 952.098 952.101 952.248IP rating IP66 IP66 IP66 IP66Frequency response 275Hz - 7kHz (±3dB) 275Hz - 7kHz (±3dB) 250Hz - 10kHz (±3dB) 180Hz - 7kHz (±3dB)Power max. 23W 23W 38W 60WPower rms 15W 15W 25W 40WSPL @ 1W/1m 106dB 106dB 108dB 112.5dB
Impedance 8Ω 670, 1k, 2k, 4kΩ 400, 500, 670, 1k, 2kΩ 250, 330, 400, 500, 1k, 2kΩ
Tappings - 15W, 10W, 5W, 2.5W 25W, 20W, 15W, 10W, 5W 40W, 30W, 20W, 15W, 10W, 5WDimensions 250 x 145 x 270mm 250 x 145 x 290mm 300 x 180 x 315mm 400 x 200 x 420mmWeight 1.52kg 1.88kg 2.44kg 3.9kg
IP6590º
DISPERSION
FrH50Item ref 952.066LF driver 165mmØ (6.5”) reverse wooferHF driver 25mm (1”) phenolic dome tweeterIP rating IP65Frequency response 90Hz - 20kHzPower max. 50W
FrH50Power rms 30WSPL @ 1W/1m 99dB (±3dB)
Tappings 3.75W, 7.5W, 15W, 30WImpedance : 100V 333, 666, 1.3k, 2.6kΩDimensions 355 x 255 x 370mmWeight 3.56kg
100V LINE Cable entry on rear of unit
100V LINE IP66130º
DISPERSION
25
Cable entry on underside of unit
Cable entry on rear of unit
HornS | LOUDSPeAKeRS
HCH15 HCH15V HCH25V HCH30VItem ref 952.079 952.082 952.085 952.088IP rating IP66 IP66 IP66 IP66Frequency response 275Hz - 7kHz (±3dB) 275Hz - 7kHz (±3dB) 250Hz - 10kHz (±3dB) 240Hz - 10kHz (±3dB)Power max. 23W 23W 38W 45WPower rms 15W 15W 25W 30WSPL @ 1W/1m 106dB 106dB 108dB 108dB
Impedance 8Ω 670, 1k, 2k, 4kΩ 400, 500, 670, 1k, 2kΩ 330, 400, 500, 670, 1k, 2kΩ
Tappings - 15W, 10W, 5W, 2.5W 25W, 20W, 15W, 10W, 5W 30W, 25W, 20W, 15W, 10W, 5WDimensions 240 x 205mmØ 273 x 205mmØ 310 x 270mmØ 315 x 310mmØ
Weight 1.42kg 1.78kg 2.34kg 2.39kg
eH SerieSRECTANGULAR HORN SPEAKERSA range of 100V line PA horn speakers ideal for general purpose and standard industrial installations. Fitted with high performance 100V line matching transformers and supplied with 350mm of 2 core double insulated cable.
100V LINE IP56
eH15V eH30VItem ref 952.255 952.256IP rating IP56 IP56Frequency response 500Hz - 7kHz 350Hz - 5kHzPower rms 15W 30WSPL @ 1W/1m 100dB 108dB
Impedance 670, 1.3k, 2.6kΩ 330, 670, 1k, 2k, 3.3k, 10kΩ
Tappings 15W, 7.5W, 3.75W 30W, 15W, 10W, 5W, 3W, 1WDimensions 220 x 158 x 233mm 236 x 205 x 185mm
Weight 1.4kg 1.8kg
• Made from durable ABS plastic• Fitted with an adjustable steel mounting bracket• Wattage tappings selectable via integral rotary switch
HEAVY DUTY ROUND HORN SPEAKERSA range of heavy duty, high quality round PA horn speakers. Made from robust ABS material offering maximum protection against shock and weather. Ideal for mounting in extreme conditions (eg: on vehicles, boats or in exposed outdoor installations).
100V line models have high quality line matching transformers fitted into a sealed rear housing with wattage tappings selectable by an integral rotary switch.
HCH SerieS
100V LINE IP66
• 270° adjustable mounting bracket• Supplied with 500mm double
insulated connecting cable• Fitted with high quality
aluminium voice coils• Note: 952.079 (8Ω only)
100ºDISPERSION
120ºDISPERSION
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
26 LOUDSPeAKeRS | HornS
CF20Item ref 952.201Horn size 520mmØ (20”)Dimensions 380 x 520mmØ
Weight 1.9kg
• Standard 13/8” x 18tpi thread connection
OUTDOOR HORN PAIR PA SySTeM
PA REFLEX HORN FLAREA reflex horn flare for fitting to Adastra HD Series horn driver units to form a complete horn speaker unit. Robust and weatherproof design with adjustable mounting bracket, suitable for outdoor applications.
CF20
130ºDISPERSION
4 x DRIVERS HD40V (tapped at 40W each) Item ref: 952.110
4 x HORNSCF20 Item ref: 952.201
AUDIO SOURCE M49 Item ref: 952.190
AMPLIFIER RM120 Item ref: 953.111
SLAVE AMPLIFIER RS120 Item ref: 953.120
100V DRIVER UNITS
• Wattage tappings selectable by rotary switch• Connection via 2-core 500mm flylead• 1 3/8” thread
100V line matching transformer driver units.
HD SerieS16Ω DRIVER UNITS
• Connection via terminal posts• 1 3/8” thread
Low impedance 16Ω driver units for general purpose installations.
HD SerieS
100V LINE IP66IP66
HD40V HD60VItem ref 952.110 952.216Freq response 160Hz - 8kHz 160Hz - 8kHzPower rms 40W 60WSPL @ 1W/1m 112.5dB 114dB
Impedance 250, 330, 500, 1k, 2kΩ 167, 200, 250, 330, 500, 1k, 2kΩ
Tappings 40W, 30W, 20W, 10W, 5W
60W, 50W, 40W, 30W, 20W, 10W, 5W
Dimensions 137 x 150mmØ 159 x 125mmØ
Weight 2.6kg 2.72kg
HD40 HD60Item ref 952.207 952.210IP rating IP66 IP66Freq response 160Hz - 7kHz 160Hz - 7kHzPower rms 40W 60WSPL @ 1W/1m 112.5dB 113.5dB
Impedance 16Ω 16ΩDimensions 98 x 113mmØ 100 x 125mmØ
Weight 2kg 2.5kg
ΩLOW
IMPEDANCE
eXAMPLe SeT-UP
Cable entry on rear of unit
27
Amplifiers & Mixers Adastra 100V mixer-amplifiers form the heart of any professional audio installation and are available in various output powers and configurations.
Coupled with complimentary sound sources, slave amplifiers, distribution mixers and induction loop drivers; these units form the modular building blocks with which to drive a virtually limitless variety of speaker units and build systems specifically suited to almost any commercial application.
Mixer and Slave Amplifiers Adastra’s wide range of amplifiers, from compact to 19” rack mountable, are suitable for a variety of applications including bars, fitness studios and live PA. A range of slave amplifiers have also been designed to complement each series of mixer amplifiers to enable extended, large-scale systems to be designed.
Pages 28 - 32
RM60 MIXER AMPLIFIER
POWER
MASTER
TREBLEBASSLN5/USBLINE 4MIC/LINE 3MIC/LINE 2MIC 1
0 10 0 10 0 10 0 10 0 10 -10 +10 -10 +10
0
-5
-10
-15
-20
ON
USB/SD
REPEAT EQVOLUME
SD CARD INPUT
Zoning Mixers and AmplifiersAdastra zoning mixers and amplifiers offer innovative solutions for multi-zone installation and audio routing systems. Each Item ref has been carefully designed to address a wide range of applications and is built to Adastra’s exacting standards to give long term, reliable service and simplicity of use.
Pages 35 - 36
LINE 1
MIN MAX
ZONE 1LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 2LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 3LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 4LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 5LINE 2
MIN MAX
MONO
Z5M 5-ZONE MIXER
ON
POWER
LINE
SIGNAL
1 2
Induction Loop Systems These specialist sound source products are an essential feature for all modern PA installations. Adastra’s induction loop equipment is the ideal solution to allow equal access to information and announcements for hearing aid users.
Pages 33 - 34
LA-600 INDUCTION LOOP AMPLIFIER
CH 1 CH 2
INPUTS EQ MASTER
CH 3 BASS TREBLE LOOP CURRENT
SIREN POWER
PEAK CURRENT
0 10 0 10 0 10 0
0
10-10 +10
0
-10 +10
3 4 5 6 7 8 9
Sound Sources These fully featured multimedia units can be used to extend your system with products boasting CD/DVD players, USB media players and FM tuners.
Page 37
AD-200 MULTIMEDIA AUDIO PLAYERON
OFF CD/USB/SD
1 2 3 4 5
6 7 8 9 0
DIRECT TRACK ACCESSREMOTESENSOR USB
SDEJECT PLAY/PAUSE STOP FOLDER SKIP
+10 MUTE PROG SOURCE MODE PITCH
Icon Guide
100V LINE
100V Line
1U 19” rack
mountable
19” rack mountable
Low impedance
+48VPHANTOM
POWER
+48V Phantom power
ΩLOW
IMPEDANCE
introduction | AMPLIFIeRS
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
28
Cm30 Cm60Item ref 953.100 953.101Frequency response : Line 91Hz - 38kHz 91Hz - 48kHzFrequency response : Mic 93Hz - 16.3kHz 93Hz - 15.0kHzMic inputs 6.3mm jack XLR/6.3mm jack comboInput impedance : Mic 1.8kΩ 1.8kΩInput sensitivity : Line -8dB -8.8dBInput sensitivity : Mic -47.5dB -50.1dBOutput power 30Wrms 60WrmsSignal to noise ratio : Line 79dB 90dBSignal to noise ratio : Mic 73dB 82dBMax. attenuation: Line 73dB 90dBMax. attenuation: Mic 78.5dB 88.0dBWeight 3.76kg 4.82kg
CS60Item ref 953.102Power supply 110/230Vac, 50/60Hz (IEC)DC power 12Vdc option (screw terminals)Output power 60WrmsInput Line in (RCA)Output: Signal 2 x RCAOutputs: Speaker 100V / 8Ω / COM terminalsControls Master volumeDimensions 329 x 210 x 84mmWeight 4.72kg
Cm SerieSCOMPACT 100V LINE MIXER-AMPLIFIERS
• Microphone & line inputs• Integral USB and SD card player• 100V line or 8Ω operation
100V line amplifiers with an integral mixer and digital audio player in a half width 2U housing. Inputs for microphone, line input and USB/SD player are governed by front panel volume controls and a master volume. Mono output to either 100V line or 8Ω speaker load is connected via screw terminals on the rear panel. Designed as a convenient solution for small to medium PA installations.
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110/230Vac, 50/60Hz (iec)dc power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Vdc option (screw terminals)output: Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x rcaoutputs: Speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100V / 8Ω / coM terminalsinputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Microphone (XLr & 6.3mm jack) & line (rca)controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mic, line, uSB/Sd, master volumeaudio source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . integral uSB/Sd digital audio playertHd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <1.0%dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 x 210 x 84mm
tHd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <1.0%frequency response : Line . . . . 93Hz - 16.3kHzMax. input level: Line . . . . . . . . . . . . . . . . . 7.2dBV
Signal to noise ratio . . . . . . . . . . . . . . . . . . . . 90dBMax. attenuation: Line. . . . . . . . . . . . . . . . . . 90dB
• 100V line or 8Ω operation• RCA phono input and output
• Compact solution for expanding PA installations
CS60COMPACT 100V LINE SLAVE AMPLIFIERA 100V line slave amplifier in a half width 2U housing. Features RCA line in and out with a master volume control. Mono output to either 100V line or 8Ω speaker load is connected via screw terminals on the rear panel. Connect to a mixer amplifier to expand small to medium PA installations.
MIC LINE IN USB/SD MASTERCM60
ON -20 -15 -10 -5 0
POWER
FOG SIREN ALERT
USB/SD
REPEAT EQVOLUME
SD CARD INPUT
MIC LINE IN USB/SD MASTERCM30
ON -20 -15 -10 -5 0
POWERUSB/
SDREPEAT EQ
VOLUME
SD CARD INPUT
230V ~ 50Hz110V ~ 60Hz
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
CS60 SLAVE AMPLIFIER www.avsl-adastra.com
Order ref: 953.102
LINEOUT
LINEIN
L
R
12Vdc INPUT
COM 8Ω 100V
SPEAKER OUTPUT
FUSE: T1A/230VT2A/110V
CS60 rear panel
230V ~ 50Hz110V ~ 60Hz
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
CM30 MIXER AMPLIFIER www.avsl-adastra.com
Order ref: 953.100
LINEOUT
LINEIN
L
R
12Vdc INPUT
COM 8Ω 100V
SPEAKER OUTPUT
FUSE: T500mA/230V
T1A/110V
CM30 & CM60 rear panel
0 10POWERMASTERCS60
100V LINE
ΩLOW
IMPEDANCE
100V LINE
ΩLOW
IMPEDANCE
AMPLIFIeRS | coMPact MiXer aMPLifierS | coMPact SLaVe aMPLifier
29
rm SerieS
• 5 input channels• Integral USB/SD audio player• External D.C. power option
• 8Ω or 100V line speaker output• 2U 19" rack mountable
• Supplied with rack-mount ears• Note: (953.112) has an FM tuner
5 CHANNEL 100V LINE MIXER AMPLIFIERS100V line amplifiers with an integral mixer in a 2U rack-mountable housing. Featuring 5 input channels which include a balanced XLR microphone input with switchable phantom power and Vox override, 2 mic/line jack inputs and 2 RCA line inputs, of which one can be fed from the internal USB/SD card audio player. Bass & Treble EQ and Master volume control the overall output, which can power either low impedance or 100V line speakers. Generous features and versatility making a comprehensive control centre for commercial sound installations.
100V LINE
2U 19” rack
mountable
ΩLOW
IMPEDANCE
RM60 MIXER AMPLIFIER
POWER
MASTER
TREBLEBASSLN5/USBLINE 4MIC/LINE 3MIC/LINE 2MIC 1
0 10 0 10 0 10 0 10 0 10 -10 +10 -10 +10
0
-5
-10
-15
-20
ON
USB/SD
REPEAT EQVOLUME
SD CARD INPUT
RM120 MIXER AMPLIFIER
POWER
MASTER
TREBLEBASSLN5/USBLINE 4MIC/LINE 3MIC/LINE 2MIC 1
0 10 0 10 0 10 0 10 0 10 -10 +10 -10 +10
0
-5
-10
-15
-20
ON
USB/SD
REPEAT EQVOLUME
SD CARD INPUT
RM240S MIXER AMPLIFIER
POWER
MASTERZONE 1 ZONE 2 ZONE 3 ZONE 4 ALL
TREBLEBASSLN5/USBLINE 4MIC/LINE 3MIC/LINE 2MIC 1
0 10 0 10 0 10 0 10 0 10 -10 +10 -10 +10
0
-5
-10
-15
-20
ON
USB/SD
REPEAT EQVOLUME
SD CARD INPUT
PHA
NTO
MM
IC/L
INE
2M
IC/L
INE
3
MIC
LINE
OFF
ON
VOX
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
RM60 MIXER AMPLIFIER
www.avsl-adastra.comOrder ref: 953.110
24Vdc
DC INPUTPOWER INPUT LINEOUT
LINE 5 LINE 4 MIC/LINE 3 MIC/LINE 2 MIC 1
COM 8Ω 100V
SPEAKER OUTPUT
T1A/230VT2A/110V
230V ~ 50Hz 110V ~ 60Hz
RM60 rear panel
PHA
NTO
MM
IC/L
INE
2M
IC/L
INE
3
MIC
LINE
OFF
ON
VOX
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
RM120MIXER AMPLIFIER
www.avsl-adastra.comOrder ref: 953.111
24Vdc
DC INPUTPOWER INPUT LINEOUT
LINE 5 LINE 4 MIC/LINE 3 MIC/LINE 2 MIC 1
COM 8Ω 100V
SPEAKER OUTPUT
T3.15A/230VT6.3A/110V
230V ~ 50Hz 110V ~ 60Hz
RM120 rear panel
PHA
NTO
MM
IC/L
INE
2M
IC/L
INE
3
MIC
LINE
OFF
ON
VOX
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
RM240SMIXER AMPLIFIER
www.avsl-adastra.comOrder ref: 953.112
24Vdc
DC INPUTPOWER INPUT LINEOUT
LINE 5 LINE 4 MIC/LINE 3 MIC/LINE 2 MIC 1
ANTENNA
SPEAKER OUTPUT
T5A/230VT10A/110V
230V ~ 50Hz 110V ~ 60Hz
COM 8Ω 100V 100V 100V 100V
ZONE1 ZONE2 ZONE3 ZONE4
RM240S rear panel
rm60 rm120 rm240SItem ref 953.110 953.111 953.112Power supply 110/240Vac, 50/60Hz (IEC) 110/240Vac, 50/60Hz (IEC) 110/240Vac, 50/60Hz (IEC)DC power 24Vdc (screw terminals) 24Vdc (screw terminals) 24Vdc (screw terminals)Output power 60Wrms 120Wrms 240WrmsOutputs : Speaker 100V / 8Ω / COM terminals 100V / 8Ω / COM terminals 4 x 100V zone / 8Ω / COM terminalsSpeaker switching N/A N/A Zones 1, 2, 3, 4, AllOutput: Signal 2 x RCA 2 x RCA 2 x RCAInputs Mic XLR, 2 x mic/line jack, 2 x RCA lineControls Mic1, mic/line2+3, line4+5 (USB), bass, treble, master volumeequalizer : bass 100Hz ±10dB 100Hz ±10dB 100Hz ±10dBequalizer : Treble 10kHz ±10dB 10kHz ±10dB 10kHz ±10dBAudio source Integral USB/SD digital audio player Integral USB/SD digital audio player Integral USB/SD/FM playerRear panel switches Phantom, Vox, Mic/Line (2 + 3) Phantom, Vox, Mic/Line (2 + 3) Phantom, Vox, Mic/Line (2 + 3)Phantom power +20V (MIC 1 input) +20V (MIC 1 input) +20V (MIC 1 input)THD <1.0% <1.0% <1.0%Dimensions 433 x 320 x 89mm 433 x 320 x 89mm 433 x 320 x 89mmWeight 5.98kg 8.36kg 9.62kg
MiXer aMPLifierS | AMPLIFIeRS
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
30
mPA12Item ref 952.439Power supply 12Vdc (3A max)Auxiliary input 85mV (±1dB) @ 10kΩMicrophone input 3.5mV (±1dB) @ 20 - 50kΩOutput impedance 4 - 16ΩOutput power : 4Ω 12WrmsDimensions 38 x 150 x 150mmWeight 650g
mPA12MOBILE PA AMPLIFIER
• Fog horn and siren• 1 Mic and 1 Aux input with
individual volume controls• Mounting hardware supplied• Speaker and power connections via
4 pin plug with flying leads (supplied)
A compact amplifier for installation into vehicles for mobile broadcasts. The unit can be easily mounted into a car or boat, and is ideal for connection to an Adastra horn or surface mount speakers.
ΩLOW
IMPEDANCE
MPA12 MOBILE PA AMPLIFIER POWER
AUXMICAUXMIC SIREN
FOG
GRAYSPEAKER-
WHITESPEAKER+
BLACK -GND
RED+12V
MPA12
CAUTIONDO NOT OPEN. NO USER
SERVICEABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK
MPA12 rear panel
• 5 input channels• USB/SD/FM audio player• Slot load CD player• External D.C. power option• 8Ω or 100V line speaker output• 2U 19" rack mountable• Supplied with rack-mount ears
100V line mixer-amplifier with integral sound source. 5 input channels include a balanced XLR microphone input with switchable phantom power and Vox override, 2 mic/line jack inputs and 2 RCA line inputs.
A built-in CD player provides audio playback alongside a USB/SD media player with an integral FM radio tuner. Bass & Treble EQ and Master volume control the overall output, which can power either low impedance or 100V line speakers. A comprehensive solution for commercial sound installations.
5 CHANNEL 100V LINE MIXER AMPLIFIER with CD/USB/SD/FM
rmC120
rmC120Item ref 953.141Power supply 110/240Vac, 50/60Hz (IEC)DC power 24Vdc (screw terminals)Output power 120WrmsOutput: Signal 2 x RCAInputs Mic XLR, 2 x mic/line jack, 2 x RCA line
ControlsMic1, mic/line2+3, line4+5 (USB), bass, treble, master volume
Audio source Integral CD player & USB/SD/FM moduleequalizer : bass 100Hz ±10dBequalizer : Treble 10kHz ±10dBRear panel switches Phantom, Vox, Mic/Line (2 + 3)Outputs : Speaker 100V / 8Ω / COM terminalsPhantom power +20V (MIC 1 input)THD <1.0%Dimensions 433 x 320 x 89mmWeight 9kg
2U 19” rack
mountable
RMC120 MIXER AMPLIFIER
POWER
MASTER 0-5
-10-15-20ON
TREBLE
-10 +10
BASS
-10 +10
LN5/CD
0 10
LINE 4
0 10
MIC/LINE 3
0 10
MIC/LINE 2
0 10
MIC 1
0 10
FM REPEAT
SKIP FOLDER
RANDOM CD/USB/SD
MUTE/ON/OFF
SD CARD INPUT
PHA
NTO
M
MIC
/LIN
E 2
MIC
/LIN
E 3
MIC
LINE
OFF
ON
VOX
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
RMC120MIXER AMPLIFIER
adastra.avsl.comOrder ref: 953.141UK
24Vdc
DC INPUTPOWER INPUT
LINEOUT
LINE 5 LINE 4 MIC/LINE 3 MIC/LINE 2 MIC 1
FM ANTENNA
COM 8Ω 100V
SPEAKER OUTPUT
T3.15A/230VT6.3A/110V
230V ~ 50Hz 110V ~ 60Hz
RS120 rear panel
AMPLIFIeRS | MiXer aMPLifierS | Pa aMPLifier
31
rS SerieS
• RCA slave inputs and outputs• 8Ω and 100V line speaker output• Peak and signal LEDs
• 2U 19" rack mountable• Supplied with rack-mount ears
100V LINE SLAVE AMPLIFIERSHigh power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems.
100V LINE
2U 19” rack
mountable
ΩLOW
IMPEDANCE
RS120 SLAVE AMPLIFIER
PEAKSIGNALPOWER
MASTER
RS240 SLAVE AMPLIFIER
PEAKSIGNALPOWER
MASTER
POWER INPUT
24Vdc SPEAKER OUTPUTSLAVEOUT
SLAVEIN
L
R
COM 8Ω 100V
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE RS120
SLAVE AMPLIFIER www.avsl-adastra.comOrder ref: 953.120
T3.15A/230VT5A/110V
230V ~ 50Hz 110V ~ 60Hz
RS120 rear panel
POWER INPUT
24Vdc SPEAKER OUTPUTSLAVEOUT
SLAVEIN
L
R
COM 8Ω 100V
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE RS240
SLAVE AMPLIFIER www.avsl-adastra.comOrder ref: 953.121
T5A/230VT10A/110V
230V ~ 50Hz 110V ~ 60Hz
RS240 rear panel RS360 rear panel
rS120 rS240 rS360Item ref 953.120 953.121 953.122Power supply 110/240Vac, 50/60Hz (IEC) 110/240Vac, 50/60Hz (IEC) 110/240Vac, 50/60Hz (IEC)DC power 24Vdc (screw terminals) 24Vdc (screw terminals) N/AOutput power 120Wrms 240Wrms 360WrmsInput RCA slave in RCA slave in RCA slave inOutput: Signal 2 x RCA 2 x RCA 2 x RCAOutputs : Speaker 100V and 8Ω 100V and 8Ω 100V and 8ΩControls Master volume Master volume Master volumeTHD <1.0% <1.0% <1.0%Dimensions 433 x 363 x 89mm 433 x 363 x 89mm 433 x 403 x 89mmWeight 8.88kg 10.06kg 11.6kg
SLaVe aMPLifierS | AMPLIFIeRS
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
32
rS605
• Up to 300Wrms total output• 100V line or 8Ω output options• Individual gain controls on rear panel• 5-zone amp or 5-channel mixer-amp modes• 2U rack mountable
5 CHANNEL SLAVE AMPLIFIER5-zone amplifier providing up to 60W output per channel with a choice of either 100V or low impedance outputs. Input section has 5 channels with individual volume controls which can be routed to each individual output or alternatively mixed and fed to all outputs simultaneously. A truly versatile multi-zone solution.
100V LINE
2U 19” rack
mountable
ΩLOW
IMPEDANCE
RS605 5 CHANNEL SLAVE AMPLIFIER
POWER
CH1 CH2 CH3 CH4 CH5
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
PROT
CLIP
SIGNAL
rS605Item ref 953.151Power supply 110/230Vac, 50/60HzFuse T5A (250V)Output power 300Wrms (5 x 60W, all channels driven)Output connections 5 x modular terminals (COM/8Ω/100V)Input connections 5 x paired RCA lineLine input : Sensitivity -10dBV
rS605Frequency response 100Hz-20kHzT.H.D. 1.00%S/N ratio 90dBControls 5 x volume, 5 x gain (rear), mode switchDimensions 482 x 89 x 420mmWeight 14kg
AMPLIFIeRS | SLaVe aMPLifierS
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
RS605SLAVE AMPLIFIER
adastra.avsl.com
Order ref: 953.151
CH5 CH4 CH3 CH2 CH1
POWER INPUT
T5A/230VT10A/110V
230V ~ 50Hz 110V ~ 60Hz
24Vdc
MIX 5CH
INPUT
GAIN
0 20
OUT/LINK
OUTPUT
COM 8Ω 100V
INPUT
OUT/LINK
OUTPUT
COM 8Ω 100V
GAIN
0 20
INPUT
GAIN
0 20
OUT/LINK
OUTPUT
COM 8Ω 100V
INPUT
OUT/LINK
OUTPUT
COM 8Ω 100V
INPUT
GAIN
0 20
OUT/LINK
OUTPUT
COM 8Ω 100V
GAIN
0 20
RS605 rear panel
33induction LooP aMPLifier & receiVer | AMPLIFIeRS
inDUCtiOn LOOP SyStemS
Typical hearing aid:The user switches the hearing aid to the ‘T’ position to receive induction loop signals.
Typical applications:
• Churches and places of worship
• Conference rooms and theatres
• Museums, galleries and exhibitions
Induction loop amplifiers are a must for modern PA installations to give people with hearing disabilities equal access to information and announcements.
Adastra’s induction loop equipment is designed to complement the RMseries mixer amplifiers with their multiple input options; allowing these induction loop amplifiers to be used stand alone, with up to three sound sources - no need for a separate mixer or mixer amplifier.
Induction loops
Induction loop amplifiers allow audio signals to be transmitted using a magnetic field to a suitably equipped listener. A magnetic field is created when current flows through a wire. In induction loop systems the wire is normally installed as a loop around the perimeter of the area. A small coil within a hearing aid or other suitable receiver then picks up this magnetic field and converts it to audio at a suitable level for the listener.
The loop itself is simply an insulated wire installed at a low level, around a skirting board for example.
How it works
Hearing aids designed to receive induction loop signals generally have a switch marked ‘M’ for microphone and ‘T’ for telephone (sometimes a combined position is provided). In the ‘T’ position a pickup coil, originally designed for picking signals from a telephone earpiece, is used to receive audio from induction loop systems.
The ideal signal strength for an induction loop system is such that a person switching between ‘M’ and ‘T’ would not notice a difference between the sound of someone speaking normally and a signal transmitted from the loop. We also have available a simple inductive loop receiver that allows you to listen to the loop signal using an ordinary pair of headphones, which is ideal for installing and testing induction loop systems.
It is important that the cable used to form the loop is capable of carrying the current that the amplifier produces.
Induction loop signals
HALL PA WITH INDUCTION LOOP
eXAMPLe SeT-UP
SPEAKERS 2 x BC8-B Item ref: 100.911
AMPLIFIER RM120 Item ref: 953.111
LOOP AMPLIFIER LA600 Item ref: 952.866
LOOP CABLE
AUDIENCE AREA
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
34
INDUCTION LOOP AMPLIFIER
LA-600 INDUCTION LOOP AMPLIFIER
CH 1 CH 2
INPUTS EQ MASTER
CH 3 BASS TREBLE LOOP CURRENT
SIREN POWER
PEAK CURRENT
0 10 0 10 0 10 0
0
10-10 +10
0
-10 +10
3 4 5 6 7 8 9
LA600Item ref 952.866Power supply 110/240Vac, 50/60Hz (IEC)Frequency response 50Hz - 5kHz±3dBInput sensitivity : Line -6dBu/6kΩInput sensitivity : Mic -56dBu/2kΩSignal to noise ratio 75dB (line), 60dB (mic)THD <1%Dimensions 430 x 280 x 88mm (2U)Weight 7.2kg
CH 1
METAL LOSSCORRECTION
DB / OCTAVE
CH 2CH 3LOAD IMPEDANCE: 0.2Ω min / 2Ω max.T2A / 240VT4A / 110V
L
R
LA-600 INDUCTION LOOP
AMPLIFIER
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK
www.avsl-adastra.comOrder ref: 952.866
+2
-3L
R
+2
-3L
R
+2
-3
0 3.0
0.5 2.5
1.0 2.01.5
LOOP OUTPUT / CABLE SELECTION
CABLE mm 1.0 1.5 2.5 4.0
TOTAL LOOP LENGTH
60m max
110m max
200m max
200m max
2
LOOP OUTPUT | ALARM CONTACTS
110V - 60Hz 240V - 50Hz SLAVEI/O
OFF
PHA
NTO
MLI
NE
MIC
OFF
PHA
NTO
MLI
NE
MIC
OFF
PHA
NTO
MLI
NE
MIC
Rear panel for LA600
• 3 channels, each with XLR, 6.3mm Jack or RCA phono inputs
• Inputs switchable between mic and line with optional phantom power +40Vdc
• Built-in siren for evacuation alert
• Tamper proof channel volume, bass & treble and loop current level controls
• Peak current LED indication• AGC (automatic gain control)• 19" rack mountable
An amplifier for use with induction loop cable to transmit a magnetic audio signal to hearing aids fitted with a “T” switch. This offers clearer listening without interference to hearing aid users. Ideal for use in theatres, conference rooms, museums etc.
LA600
• 3.5mm jack socket for headphone connection
• Volume control and lo-cut switch to adjust sound quality
• Ideal for testing/setting-up induction loop systems
• Can be used (with an induction loop system) to create an unobtrusive audio tour guide for art galleries, museums etc.
INDUCTION LOOP RECEIVER
Lr1
Lr1Item ref 952.854Power supply 9Vdc (PP3 battery)Dimensions 104 x 59 x 31mmWeight 78g
HOW IT WORKS
The magnetic field is picked up by hearing aid users by switching their hearing device to the “T” setting. The magnetic audio operates without using the hearing aid’s internal microphone and offers clearer listening without interference to the hearing aid user.
2U 19” rack
mountable
AMPLIFIeRS | induction LooP aMPLifier & receiVer
35Zoning MiXer | AMPLIFIeRS
Z5mItem ref 953.019Power supply 115/230Vac 50/60Hz (IEC)Inputs Line 1 L+R, Line 2 L+R, balanced XLRFOutputs Zone 1 to 5 L+R, balanced XLRMInput impedance 40kΩOutput impedance 220ΩFrequency response 20Hz - 25kHz, +0/-1dBSignal to noise ratio >100dBTHD <0.005%Dimensions 483 x 175 x 44mmWeight 2.2kg
LINE 1
MIN MAX
ZONE 1LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 2LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 3LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 4LINE 2
MIN MAX
MONO
LINE 1
MIN MAX
ZONE 5LINE 2
MIN MAX
MONO
Z5M 5-ZONE MIXER
ON
POWER
LINE
SIGNAL
1 2
FUSE T200mA/250V
AC
INPU
T
OUT
LR ZONE 3
OUT
LR ZONE 4
OUT
LR ZONE 5
IN
LR LINE 2
IN
LR LINE 1
OUT
LR ZONE 2
OUT
LR ZONE 1
Rear panel for Z5M
ZONING MIXER
Z5m
A zoning mixer featuring 2 inputs with individual volume controls, and 5 zones each with a mono switch. All inputs and outputs are stereo via balanced XLR connectors. Acts as the central mix and control in an installation serving up to 5 separate stereo speaker zones.
• 2 inputs to 5 zones• Mono selectable for each zone• Fully balanced XLR connections
1U 19” rack
mountable
eXAMPLe SeT-UP
5 x ACTIVE SPEAKER PAIRS BC5A-S Item ref: 170.164
AUDIO SOURCES AD-100 Item ref: 952.979
AD-200 Item ref: 952.980
ZONING MIXER Z5M Item ref: 953.019
MULTI-ROOM INSTALLATION
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
36
• Switchable 48V phantom power• Lo-cut rumble filter for mic channels• 3-band EQ for mic channels
• 2-band EQ for stereo channels• Foot-switchable internal DSP reverb or ext. FX• 4 stereo zone outputs with level controls
1U live/zoning rack mixer with 2 mic/line inputs and 2 stereo line inputs feeding 4 stereo outputs. Mic channels feed to all outputs, whereas the stereo channels are switchable to any required zone.
Applications vary from additional vocal mixing for DJ set-ups to multi-room zoning for venues and many other scenarios.
MULTI-PURPOSE 1U MIXER
Z44rZ44r
Item ref 953.020Power supply 230Vac, 50Hz (IEC)Mic/line channel inputs Ch 1 front combo and rear jack, Ch 2 combo (rear)Mic/line channel controls Level, Lo-cut, Gain, FX and Lo/Mid/Hi EQ fadersLine 3 + 4 stereo inputs Input A (L+R) 6.3mm jack / Input B (L+R) RCALine 3 + 4 stereo controls Level, In A/B and Lo/Hi EQ fadersOutput connections Outputs 1-3 (L+R) RCA, Output 4 (L+R) 6.3mm jackOutput controls Level, Line 3 on/off, Line 4 on/offFX connections (6.3mm jack) Footswitch, Send (defeats onboard reverb), L+R ReturnFX controls Reverb time, Depth (onboard or external level)Indicators (LeD) Power, 48V, Mic/line signal+peak, Line peak, Output peakFire alarm contacts Modular terminal, make-to-mute all except Mic 1Dimensions 483 x 44 x 220mmWeight 2.75kg
MUTECONTACTS RETU
RNS
SEND
FOO
TSW
ITCH
L
R
LINE 4
— +
L
R
OUT 4 OUT 3 OUT 2 OUT 1
CAUTIONRISK OF ELECTRIC
SHOCK
DO NOT EXPOSE TO RAIN OR MOISTURE
230Vac FUSE T1A Order ref: 953.020 48V
XLR MIC 1
MIC/LINE 2FX LOOP MIC/LINE 1
L
R
L
R
B ALINE 4 B ALINE 3
Z44R
Rear panel for Z44R
LINE SPLITTER
• Up to 12 outputs from 1 or 2 inputs• Individual volume control for each output• Input peak LEDs
Signal splitter with 2 line inputs which are buffered and divided across 6 outputs each. Can be used as a 6-way stereo splitter or can be switched as a mono system feeding all 12 outputs from input A.
Applications include zone mixing, personal monitoring, effects patching and routing in complex recording setups.
LS26LS26
Item ref 953.022Power supply 115/230Vac, 50/60Hz (IEC)Inputs A & B, (6.3mm jack)Outputs 1 - 6 & 7 - 12 (6.3mm jack)Input impedance 20kΩOutput impedance 220ΩFrequency response 20Hz - 20kHz, +0/-1dBSignal to noise ratio >95dBTHD <0.008%Dimensions 483 x 44 x 170mmWeight 2.0kg
1 10 1 10 1 10 1 10 1 10 1 10
CHANNEL B
1 10 1 10 1 10 1 10 1 10 1 10
CHANNEL A
MONOSTEREO
SIGNAL B SIGNAL A
VOL 12 VOL 11 VOL 10 VOL 9 VOL 8 VOL 7 VOL 6 VOL 5 VOL 4 VOL 3 VOL 2 VOL 1
LS26 STEREO/MONOLINE SPLITTER
OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 OUT 9 OUT 10 OUT 11 OUT 12INPUT A INPUT B
MONO STEREO
MODE
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCKAC INPUT
FUSET200mA/250V
AC SELECTOR SWITCH
115V60Hz
230V50Hz
LS26
Rear panel for LS26
1U 19” rack
mountable
1U 19” rack
mountable
AMPLIFIeRS | Zoning MiXer | Line SPLitter
OUT 4
LINE 3
LINE 4
OUT 3OUT 2OUT 1REVERB
TIME
DEPTH
OFF
ON
LINE 4
HILO
EQLEVEL
IN AIN B
LINE 3MIC/LINE 2MIC/LINE 148V
HILOHIMIDLO
GAIN
FX
EQEQLEVELLEVEL
HIMIDLO
GAIN
FXMIC 1
EQLEVEL
IN AIN B Z44R
37
AD-100 DAB/FM RADIO TUNER ENTER/AUTO-SCAN
TUNEREMOTESENSORON
OFF
• Auto tune• Radio station display (RSD)• 9 preset memory
• IR remote control• Supplied with antenna
This unit features both a DAB and an FM tuner. Complete with auto tune and preset memory function it is easy to select the required channel with the supplied IR remote control.
DAB/FM RADIO TUNER
AD-100
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK.
DO NOT EXPOSE TO RAIN OR MOISTURE
AD-100DAB/FM RADIO TUNER
adastra.avsl.comItem ref: 952.979UK
AC 230V/50Hz, 50VAFuse T630mAL
OUTPUTANTENNA R L
Rear panel for AD-100
AD-100Item ref 952.979Power supply 230Vac, 50Hz (IEC)FM : Tuning range 87.5 - 108MHzDAb frequency range 174.928 - 239.2MHzSensitivity 10uV emfTHD 0.30%Audio stereo separation 30dBAudio output voltage 400mVAudio (S+N)/N 50dBFM step frequency 50kHzAdjacent channel selectivity 31dBFar-off selectivity 49dBDimensions 482 x 185 x 44mmWeight 2.35kg
AD-200 MULTIMEDIA AUDIO PLAYERON
OFF CD/USB/SD
1 2 3 4 5
6 7 8 9 0
DIRECT TRACK ACCESSREMOTESENSOR USB
SDEJECT PLAY/PAUSE STOP FOLDER SKIP
+10 MUTE PROG SOURCE MODE PITCH
BALANCED OUTPUTFUSE 250mA 250V
115V 230V
110-120V AC~60Hz220-240V AC~50Hz20W
R LR
OUTPUT
LWARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTIONDO NOT OPEN. NO USER
SERVICABLE PARTS INSIDE.RISK OF ELECTRIC SHOCK
Rear panel for AD-200
AD-200Item ref 952.980
Power supply 115/230Vac, 50/60Hz (Fig 8)
Antishock 40 SecondsSample rate 44.1kHzFrequency response 20Hz to 20kHzTotal harmonic distortion <0.05%Signal to noise ratio 100dBDynamic range 96dBChannel separation 50dB (1kHz)Dimensions 482 x 44 x 185mmWeight 3.35kg
DAb (Digital Audio broadcasting)DAB works by combining two digital technologies to produce an efficient and reliable radio broadcast system.Traditionally radio programmes were broadcast on different frequencies via FM and AM, and the radio had to be tuned into each frequency, as needed. DAB is a digital radio broadcasting system that combines multiple audio streams onto a relatively narrow band centred on a single broadcast frequency, creating a more efficient communication channel.The original objectives of converting to digital transmission were to enable higher fidelity, more stations, and more resistance to noise and interference than in analogue FM radio.
benefits of DAb• Great reception and less susceptible to interference• Excellent sound quality• Wider selection of channels, particularly in rural areas• Automatic tuning• More channels available
This multimedia player features CD, USB or SD inputs, easy track and folder search, direct track access and ID3 tag display. The 2 x RCA or balanced XLR allows for line level output that can be connected to various amplifiers. The 1U 19” rack mountable design allows for easy installation. Ideal for use in restaurants, bars or leisure centres. Supplied with remote control.
CD/USB/SD MULTIMEDIA AUDIO PLAYER
AD-200
• Digital audio playback • Single/continuous/random playback
1U 19” rack
mountable
1U 19” rack
mountable
Sound Source | AMPLIFIeRS
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
38
Portable PA Our comprehensive range of portable PA units are the ideal choice for applications such as demonstrations, outdoor meetings, school fairs, exercise classes and vehicle based public address.
Accessories From rack accessories to microphones, Adastra’s vast range of accessories are the ideal way to expand your sound systems.
PA Systems Adastra’s distinctive portable PA systems each offer unique features to suit various applications. Our PAV8 unit boasts digital music playback by USB or the built in SD card readers, whilst the H25 offers many of the same features for lighter uses, such as product demonstrations and instruction.
Pages 39 - 41
Megaphones Widely used for crowd management and mass communication, our portable megaphones are powerful and durable. Each megaphone features a built-in amplifier and is fitted with a high quality microphone.
Pages 42 - 43
Rack Accessories Expand your sound installations with Adastra’s 19” rack accessories. Easy self assembly makes mounting your equipment straightforward, and our lockable data cabinets provide safety and security.
Pages 44 - 47
Transformers and Controls Volume controls and 100V line transformers.
Page 47
Microphones Boundary microphones provide sound reinforcement for recording and sound pick-up applications whilst our specialist paging microphones are some of the best selling and most desired in the European PA market.
Pages 48 - 50
Noise Pollution Ideal sound limiting solutions from Adastra for monitoring noise levels in venues such as public houses.
Page 43
PORTAbLe PA | ACCeSSORIeS | introduction
Icon Guide
100V LINE
100V Line
1U 19” rack
mountable
19” rack mountable
600m MAX.
PROJECTION
Maximum projection
UP TO50mRANGE
Maximum range
30Wmax.POWER
OUTPUT
Maximum power output
Maximum weight load
10kg
Max.weight
load
39H25 | PORTAbLe PA
H25Item ref 952.410
Power supply: main unit 230Vac, 50Hz or internal rechargeable battery
Power supply: VHF beltpack 9Vdc PP3 batteryOutput power: max 25Wbattery life (hours) : Voice 7 hoursbattery life (hours) : Signal 2 hoursFrequency response 100Hz - 12kHzS/N ratio >60dBCarrier frequency 174.1MHzVHF operating distance 35.0mVHF tuning stability 0.005% quartz crystal lockedDimensions: VHF beltpack 205 x 68 x 25mm (ex. antenna)Weight: VHF beltpack 76g (no battery)Dimensions: main unit 155 x 183 x 285mmWeight: main unit 2.74kg
Neat storage of the mains/charger
lead & battery
Optional VHF handheld microphone available.
Item ref 952.413 page 41
• Mains or battery operation• Internal USB audio player• Built-in VHF neckband microphone system• Ergonomic, compact design
H25HANDHELD PA SYSTEM WITH NECKBAND MICROPHONEThe H25 is a fully integrated PA unit in an ergonomic ABS handheld housing which can be powered either by mains or the internal rechargeable battery.
Applications include demonstrations, speech reinforcement in educational scenarios and mobile public address.
Control panel
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
40 PORTAbLe PA | dt50
Dt50Item ref 952.400
Power supply110-240Vac, 50/60Hz (fig 8), 12Vdc or internal battery
battery life Up to 8 hoursHF driver 2 x 25mmØ balanced domeLF Driver 200mm (8") reinforced paper coneOutput power 50WrmsSNR 85dBConstruction Injection-moulded polypropylenePower supply : Handheld transmitters 9Vdc (PP3 battery) eachWireless microphone frequencies 174.1MHz + 175.0MHzFrequency response : Mic 40Hz - 15kHzDimensions 380 x 295 x 220mmWeight 7.2kg
Dt50BAGItem ref 952.403Dimensions 400 x 290 x 250mmWeight 570g
Dt50
Dt50BAG
PORTABLE DESKTOP PA
DT50 TRANSIT BAG
Self-contained PA unit with a compact PP moulded cabinet in a desktop format. Built-in USB/SD/FM player and dual handheld VHF microphone system make this a comprehensive solution for tasks as diverse as classroom activities, meetings and singing rehearsal.
Mains or internal re-chargeable battery operation and very manageable size enable this unique product to be used practically anywhere.
Carry bag for DT50 portable PA unit made from heavy duty nylon with 10mm padding. Flaps for control/input panels and carry handle are secured with hook & loop fasteners and side slots accommodate the shoulder strap attachments.
Full front and rear zip openings allow the DT50 to be operated in the bag with access to the rear microphone holders, whilst a front zip pocket is included for leads and accessories.
• Echo effect for microphones• 2 x VHF handheld microphones and
remote control included• Integral holsters for
handheld transmitters
• Powerful 50W output• Optional neckworn
transmitter available - 174.1MHz (178.851) and 175.0MHz (178.852)
41
PAV8Item ref 952.409Power supply 15Vdc, 3A (adaptor supplied) or internal batterybattery life 8 hours (approx)Fuse T5AH (5 x 20mm internal)Drivers 200mm (8“) main driver & 25mm (1“) HF unitOutput power: max. 50WFrequency: handheld 174.1MHzFrequency: bodypack 175.0MHzWireless range 50m max.Audio source Multi-format disc player, USB/SD audio & FM tunerVideo format DVD or VCD discVideo output Composite video (PAL) RCAConnections 2 x antenna, video out, aux in, mic in, DC15V inControls Volume, Bass, Treble, Echo, DVD Vol, Aux Vol, Mic volbatteries 2 x AA handheld, 2 x AA beltpackRemote control IR remote control included (CR2025 battery)Dimensions 270 x 395 x 270mmWeight 9.9kg
VH174.1 VH175.0 VH174.8Item ref 952.413 952.415 952.417Operating frequency 174.1MHz 175.0MHz 174.8MHzPower supply 9Vdc (PP3 battery, supplied)Capsule Unidirectional, dynamicDimensions 270 x 45mmØWeight 190g
PAV8PORTABLE PA WITH VHF MICS & CD/DVD/USB/SD/FM
• Compact high density moulded cabinet• Mains or internal rechargeable battery power• Handheld and neckband VHF microphones• Compatible with CD+G discs for karaoke• Multi-format slot-fed disc player
• USB/SD audio player and FM tuner• I.R. remote control for playback• Composite video output• Wired mic and aux inputs• Audio line output
Portable PA unit with 8" active speaker in a compact injection-moulded enclosure. Powered by internal rechargeable battery or supplied mains adaptor. Dual VHF wireless system with 1 handheld and 1 neckband/bodypack microphone. Further RCA inputs for line input and a jack input for wired microphone are included. Playback is served by a slot-fed CD/DVD player with integral USB/SD media player and FM tuner.
Composite video output is provided on a single RCA connector. Rear panel control or IR remote handset for DVD/CD/USB/SD/FM operation. The cabinet can be pole-mounted or free-standing with an integral carry handle for easy portability. Connected to a screen, this compact unit offers full AV capabilities for teaching and presentations.
VHF
VHF HANDHELD MICROPHONE TRANSMITTERS
• Optional addition for VHF systems• Up to 50m range• 952.413 for DT50, H25, QR10PA, QR12PA or QR15PA, (174.1MHz)• 952.415 for DT50, QR12PA or QR15PA (175.0MHz)• 952.417 for EZPA Lite 174.8MHz
Handheld VHF transmitters, designed as optional replacements for Adastra portable QRPA, DT50 and EZPA units. 952.413 = 174.1MHz, 952.417 = 174.8MHz and 952.415 = 175.0MHz
UP TO50mRANGE
PaV8 | HandHeLd tranSMitterS | PORTAbLe PA
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
42
PORTABLE MEGAPHONE 10W
L01200m
MAX. PROJECTION
L01Item ref 952.001Power max. 10Wbatteries 12Vdc (4 x C)Dimensions 220 x 140mmØWeight 450g
MEGAPHONE 25W WITH SIREN
L-25
L-25Item ref 952.016Power max. 25Wbattery 12Vdc (8 x C)Range 700m - 1kmSupplied with 5m power lead
(cigarette lighter to DC plug), 100cm length shoulder strap
Dimensions 335 x 230mmØWeight 1.65kg
1km MAX.
PROJECTION
Megaphones Portable megaphones are widely used for crowd management and mass communication. They are ideal for public announcements, political rallies and many more scenarios.
All of our megaphones feature a built-in siren and are supplied with a carrying strap for easy portability.
PORTAbLe PA | MegaPHoneS
MEGAPHONE 10W WITH SIREN
L10
L10Item ref 952.004Power max. 10Wbatteries 12Vdc (8 x AA)Dimensions 235 x 150mmØWeight 540g
600m MAX.
PROJECTION
43
SLING MEGAPHONE WITH LOOPER
L80r
L80rItem ref 952.126Power max. 25Wbatteries 12Vdc (8 x D)Recording mode
Up to 15s speech record + loop playback
Dimensions 360 x 230mmØWeight 1.26kg
600m MAX.
PROJECTION
600m MAX.
PROJECTIONMEGAPHONE 30W WITH SIREN
mG-220D
mG-220DItem ref 952.019Power max. 30Wbattery 12Vdc (8 x D)Range 600mDimensions 340 x 230mmØWeight 2kg
NOISE POLLUTION CONTROL SYSTEM
• Trigger level, reset time and frequency response are adjustable
• Automatic operation• Remote microphone (supplied)
monitors the sound level• Built-in contactor with 30A
switching capability• Approved by Environmental
Health Departments• Fire alarm interface
A sound limiter which is easy to install and operate. The system automatically monitors and limits the sound output in venues such as clubs, public houses, wine bars etc, avoiding possible fines and closure of premises.
nPC30A
nPC30AItem ref 952.801Power supply 230Vac, 50HzDimensions 239 x 317 x 80mmWeight 7.6kg
REMOTE INDICATORA “Traffic Light” type remote indicator for use with the Noise Pollution Control System. Housed in a metal enclosure with adjustable mounting bracket.
nPr4
nPr4Item ref 952.804Power supply 230Vac, 50HzLamp type 60W, R80, E27Dimensions 470 x 105 x 195mmWeight 3.3kg
MegaPHoneS | noiSe PoLLution SYSteM | PORTAbLe PA
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
44
19” DATA CABINETS 600 x 600mm
• Simple structure, easy to assemble• Tough glass door• Lockable bottom cable entry• Castor height 70mm
High quality, flat packed data cabinets suitable for PA and telecoms installation.
952.600 952.603Size 21U 36UDimensions 1140 x 600 x 600mm 1805 x 600 x 600mmWeight 47kg 63kg
Adjustable feet and heavy duty castors
Removable side panels and rear door
5
2
1
9
8
4 610 11
12
7
3
1
2
9
8
4 6 10 11
73
12
Top coverFrameFront doorSide panel
1234
Rear doorHorizontal beamBottom panelMounting angle
5678
Mounting profileTray2” heavy duty castorSmall round lock
9101112
Key lock for security
All round ventilation
19” Racks & AccessoriesA variety of 19” rack accessories to complete many types of system installation.
19” rack mountable
ACCeSSORIeS | 19" data caBinetS
45
19” EQUIPMENT RACKS - 435mm DEPTH
19” EQUIPMENT RACKS
• Manufactured from 1.5mm zinc coated steel• Fixing rails to front and rear with holes
punched at 44.45mm (1.75”) centres• Pre drilled to allow fitting of doors• 35mm distance from mounting
rail to front edge
19” equipment racks in black scratch resistant textured powder coated finish. Supplied in flat-packed kit form for easy self assembly. NOTE: No accessories supplied.
19” EQUIPMENT RACKS - 568mm DEPTH
952.551 952.554 952.557 952.560 952.563 952.566 952.569Size 6U 8U 12U 16U 20U 28U 35UDims 545 x 370 x 435mm 545 x 455 x 435mm 545 x 635 x 435mm 545 x 815 x 435mm 545 x 990 x 435mm 545 x 1340 x 435mm 545 x 1650 x 435mmWeight 14.5kg 16kg 18.5kg 24kg 28kg 30kg 35.5kg
952.550 952.553 952.556 952.559 952.562 952.565 952.568Size 6U 8U 12U 16U 20U 28U 35UDims 545 x 370 x 568mm 545 x 455 x 568mm 545 x 635 x 568mm 545 x 815 x 568mm 545 x 990 x 568mm 545 x 1340 x 568mm 545 x 1650 x 568mmWeight 17kg 19kg 22kg 25.5kg 28.5kg 36kg 42.5kg
19" eQuiPMent rackS | ACCeSSORIeS
ASSEMBLY & INSTALLATION OF EQUIPMENT RACKS
Ensure the flat side is on the outer surface.Place the top upside down on a flat surface and fix the side panels as shown in diagram 1. The side panels overlap both top and bottom panels. The small tongues located at the four corners of both top and bottom panels fit inside the channel section of the side panels.Align and fasten the 4 inner corner screws.
Attach the base to the side panels, align and secure the corner fixings.If required, a lockable door can be fitted. Place the location pivot (A in diagram 2) of the door into the pre-drilled hole on the bottom rail of the cabinet and fasten the spring loaded lever (B in diagram 2) into the pre-drilled hole in the top rail.NOTE: Install equipment before fitting door.
Diagram 1 Diagram 2
A - Locating pivot
B - Spring loaded lever
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
46
LOCKABLE METAL DOORSAvailable for many rack sizes. Fitted with hinges and lock supplied with 2 keys. 1mm black powder coated steel.
19” BLANKING PANELSSteel 19” rack blanking panels. Fixing screws supplied.
19” VENTILATED PANELSSteel 19” rack vented blanking panels. Fixing screws supplied.
LOCKABLE TOUGHENED GLASS DOORS
Available for all rack sizes. Fitted with hinges and lock supplied with 2 keys.
Size Dimensions Weight952.570 6U 264 x 482 x 21mm 1.78kg952.572 8U 352 x 482 x 21mm 2.24kg952.574 12U 528 x 482 x 21mm 3.15kg952.576 16U 704 x 482 x 21mm 4.06kg
Size Dimensions Weight853.011 1U 44 x 482mm 300g853.014 2U 88 x 482mm 520g853.017 3U 132 x 482mm 740g853.020 4U 176 x 482mm 970g
Size Dimensions Weight853.023 1U 44 x 482mm 260g853.026 2U 88 x 482mm 430g853.029 3U 132 x 482mm 650g853.032 4U 176 x 482mm 880g
Size Dimensions Weight952.584 6U 264 x 482 x 21mm 1.91kg952.586 8U 352 x 482 x 21mm 2.52kg952.588 12U 528 x 482 x 21mm 3.74kg952.590 16U 704 x 482 x 21mm 4.97kg952.592 20U 880 x 482 x 21mm 6.19kg952.594 28U 1232 x 482 x 21mm 8.64kg952.596 35U 1540 x 482 x 21mm 10.78kg
19” RACK DRAWER
• Heavy duty steel construction
Rack mounting steel drawer unit with ball-race sliding mechanism and latching handle.
SizeInternal Dimensions
external Dimensions Weight
853.051 2U60 x 398 x 350mm
90 x 480 x 380mm 6kg
1U PATCH PANELS
• IEC panel has integral earthing post
1U 19” rack panels punched to accept various connectors. Supplied with fixing hardware.
Size Version Dimensions Weight
853.078 1U8 IEC connector
483 x 44 x 12.5mm 340g
853.079 1U12 D-size connector
483 x 44 x 12.5mm 340g
* Connectors not supplied
Item ref952.295
RACK FIXING KIT• 20 x M6 captive nuts• 20 x M6 cross-head bolts• 20 x plastic cup washers
ACCeSSORIeS | 19" rack acceSSorieS
47
19” SUPPORT MODULESSteel finish. Fixing screws supplied.
Size Dimensions Weight853.035 1U 44 x 482 x 267mm 1.71kg853.038 2U 88 x 482 x 267mm 1.91kg853.041 3U 132 x 482 x 267mm 2.11kg
19” SUPPORT SHELF 2USupport shelf for rackmounting 2 half-width units or equipment narrower than 450mm (17.7”) width into a 2U 19” rack space. Fixing hardware not supplied.
Size Dimensions Weight853.055 2U 482 x 88 x 376mm 1.5kg
20kg
Max.weight
load1U CABLE MANAGEMENT BAR
• Black powder coat finish
Ideal to ensure good cable management in Network and PA rack mount installations.
Size Dimensions Weight710.625 1U 483 x 75 x 44.8mm 431g
19” RACK SECURITY COVER
• Can be installed left or right-hand locking• Security for noise abatement equipment• Padlock included (can be substituted) Size Dimensions Weight
853.071 1U 44 x 483 x 25mm 500g
19" rack acceSSorieS | 100V Line controLS | ACCeSSORIeS
100 VOLT LINE TRANSFORMERSA range of 100V line matching transformers. They are used to convert low impedance speakers (8 or 16Ω) to allow them to be used in 100V PA installations where long runs of cable are used.
100V LINE
Tappings Dimensions Weight952.434 0.25, 0.5, 1, 2, 4W 62 x 38 x 35mm 180g952.437 0.5, 1, 2, 4, 8W 71 x 41 x 42mm 284g952.440 1.25, 2.5, 5, 10, 20W 81 x 48 x 50mm 481g952.443 1.9, 3.75, 7.5, 15, 30W 91 x 57 x 57mm 805g952.446 5, 10, 15, 20, 30, 40W 91 x 60 x 58mm 933g
RELAY FITTED 100V VOLUME CONTROLS
• Attenuation in 10 steps: 8 x 3dB and 2 x 6dB steps• 24V relay fitted for remote fire alarm un-muting
High quality attenuators supplied with plastic surface mount back box. The faceplate is fitted with a rotary switch, and each attenuator is fitted with a relay for muting output remotely from a fire alarm panel.
100V LINE
Power Attenuation Freq response Relay Dimensions Weight952.461 12W 3dB 35Hz - 20kHz 24V, 50mA 84 x 84 x 75mm 228g952.464 24W 3dB 35Hz - 20kHz 24V, 50mA 84 x 84 x 75mm 230g952.467 36W 3dB 35Hz - 20kHz 24V, 50mA 84 x 84 x 75mm 232g952.470 50W 3dB 35Hz - 20kHz 24V, 50mA 84 x 84 x 75mm 234g
BACK BOX FOR VOLUME CONTROLS
Dimensions Weight952.479 84 x 84 x 50mm 64g
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
48
ELECTRET CONDENSER BOUNDARY MICROPHONEA high quality, unidirectional, wide range back electret microphone for sound reinforcement, recording and other sound pick-up applications.
tBm48Item ref 952.197Power supply 9 - 52Vdc phantomFrequency response 20Hz - 18kHzImpedance 300Ω (±20%), balancedMax. input sound level 130dB SPL 1kHzPickup pattern Half cardioidSensitivity -57dB (±3dB) @ 1kHzDimensions 90 x 27.5 x 100mmWeight 145g
OMNIDIRECTIONAL BOUNDARY MICROPHONE
• Phantom powered (9 - 52Vdc)• Excellent frequency response• Balanced output (XLR male connection)
This low profile ceiling or panel mounting boundary microphone has an omnidirectional pick-up pattern which is suitable for use where discrete audio surveillance is required.
Its uses range from audio pick-up in induction loop systems to audio monitoring and recording in CCTV systems.
CBm20
CBm20Item ref 952.345Cutout 20mmØFrequency response 30Hz - 15kHzMax. input SPL 120dB, 1kHz @ 1% THDSensitivity -76dB (±3dB)Dimensions 71 x 30mmØWeight 160g
• Wide frequency response• -10dB PAD and bass roll-off switches• Power switch with LED indicator• Requires 9-52V phantom power• Low profile, pyramid shape, metal housing• 4m, 3-pin mini XLR to 3-pole XLR lead supplied• Non-slip rubber base to minimise
pickup of surface vibrations• Supplied in a foam lined plastic carry case
tBm48
MICROPHONeS | BoundarY MicroPHoneS
49
CONFERENCE/PAGING MICROPHONE WITH BASE
CONFERENCE MICROPHONE WITH BASE
• High quality back-electret condenser microphone• Gooseneck assembly for convenient positioning• Collar illuminates to indicate "on air"• Paging switch on base unit• Battery or phantom power
• High quality back-electret condenser microphone• Flexible stem for convenient positioning• Paging switch on base unit• Battery or phantom power
A gooseneck microphone with base for conference or paging applications. Connection to the base is via XLR and provides power to the condenser microphone capsule either from 2 x AAA batteries in the base or from external phantom power.
A flexible stem microphone with base for conferences or meetings. Connection to the base is via XLR and provides power to the condenser microphone capsule either from 2 x AAA batteries in the base or from external phantom power.
COm47
COm46
COm47Item ref 952.352Power supply 2 x AAA batteries or external phantom 9-52VdcCapsule Back-electret condenserPolar pattern Cardioid (unidirectional)Microphone : Dimensions 435 x 21mmØbase : Dimensions 115 x 139 x 50mmWeight 560g
COm46Item ref 952.353Power supply 2 x AAA batteries or external phantom 9-52VdcCapsule Back-electret condenserPolar pattern Cardioid (unidirectional)Microphone : Dimensions 425 x 20mmØbase : Dimensions 115 x 139 x 50mmWeight 550g
conference MicroPHoneS | MICROPHONeS
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
50
PAGING MICROPHONES
• Strong, flexible 330mm gooseneck securely fixes into the base• Base is fitted with 4 soft rubber protection feet• Microphone can be used free standing or wall mounted
These high quality, heavy duty paging microphones are available with or without chiming function. Specially developed and designed for punishing industrial environments, these microphones are now some of the best selling and most desired in the European PA market.
Their strong, robust and stable base incorporates separate push switches to operate microphone and/or chime.
m-SerieS
m-49 m-50Item ref 952.190 952.193battery N/A 3Vdc (2 x AA)Controls Latching mic On/Off, non-latching mic On/Off Mic on with chime, mic off with chimeFrequency response 100Hz - 10kHz 100Hz - 10kHzImpedance 500Ω 1kΩSensitivity 2mV/Pa (-73dBV) 1.9mV/Pa (-54dBV)Termination Bare wires 3-pin XLR plugCable 6.0m 6.0mDimensions 370 x 123 x 115mm 370 x 123 x 115mmWeight 850g 860g
TALK THROUGH GLASS INTERCOMDesigned to allow conversation through a glass partition. Typical applications are ticket booths, bank counters, petrol stations and receptions.
tGm3
tGm3Item ref 952.827Power supply 9Vdc, 300mASpeaker output 400mW maxConsumption 150mADimensions : base unit 115 x 62 x 173mmDimensions : Glass unit 35 x 85mmØWeight 850g
• Desk mount base station with condenser gooseneck microphone• Glass mount remote station• Red LED power ON indication• Call tone to alert base station• Rotary switched volume control• Supplied with interconnection cable and AC/DC adaptor
MICROPHONeS | conference MicroPHoneS
51aPPLicationS | TeCHNICAL DATA
ApplicationsAdastra products cover environments and applications with a focus on clear and efficient sound coverage.
A public address system is a means of sound reinforcement for relating speech and audible information to a group of people. The setup may vary from a single portable amplifier in a small room to an intricate multi-room zoned system with multiple speaker arrays.
Since each public address venue will have its own characteristics, there are many different speaker types and installation methods depending upon the architecture of the building, ambient noise levels and coverage requirements. The key demands from any public speaker are efficient speech delivery and wide area coverage.
Typical venues include: schools/universities, medical centres, market halls, airports, train stations and places of worship.
Public Address Systems
Generally, background music is a term used for pleasant and unobtrusive playback of recorded material. Many public buildings benefit from background music systems to help create an ambience or mood for their service users. These systems may be tailored to each building and its function in much the same way as with public address systems.
The main difference is that full range audio quality is imperative with background music in order to make it listenable and inoffensive, which is not necessarily a key requirement for basic speech delivery.
Applications include: bars, retail outlets, restaurants, galleries, museums and leisure centres.
Background Music Systems
Some public address and background music components are designed for use in outdoor or damp environments. The materials used and construction methods help to make them weather resistant and able to withstand outdoor conditions.
The main factors to be taken into account when planning outdoor or weatherproof systems are safety and durability of the electrical components to be used within the proposed environment. This includes any of the equipment exposed to the potentially damaging elements including speakers, transformers, cabling and connectors. Mixers and amplifiers are more often sited in an indoor environment.
Typical environments include: patios, auction sites, arenas, theme parks, marinas and swimming pools.
Outdoor & weatherproof systems
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
52
Types of System
100W @ 4Ω70W @ 8Ω
100W @ 4Ω70W @ 8Ω
8Ω 8Ω
70W70W
+_
+_
Basic low impedance set-up
Parallel low impedance set-up
Impedance visual representation:The speaker impedes any electrical current flowing through it, in the same way that the neck of an hourglass impedes the sand flow.
1
2
3
The narrow neck controls the flow of sand just as a speaker’s impedance controls the flow of current
2 narrow necks makes it half as difficult for the sand to pass through, just as 2 parallel speakers have half the impedance as 1, allowing twice as much power to flow through
If the neck is too wide it offers too little control, just as when the speaker impedance is too low and allows too much power to flow from the amp, resulting in eventual failure
100W @ 4Ω 100W @ 4Ω
4Ω c
ombi
ned
load
4Ω c
ombi
ned
load
8Ω 8Ω
50W50W
+_
+_
8Ω 8Ω
50W50W
+_
+_
Standard loudspeakers comprise of 3 main components: a cone, a magnet and a coil. Passing a current through the coil causes the attached cone to move forward or backward. The coil is fed the electrical signal from an amplifier, which provides enough electricity to move the cone quickly, causing it to vibrate and make sound.
Since the coil is wound from very thin wire, there is a certain amount of resistance to the electricity passed through it. This, coupled with some other electrical characteristics, is known as impedance.
For any given amplifier, the impedance of the speakers attached to it must not be below the rated output impedance of the amplifier and must be rated to handle the power that the amplifier will deliver at that impedance.
For instance, a 2 x 100W amplifier may be rated down to a minimum of 4Ω on each side. However, if an 8Ω speaker is attached to each side, the amplifier may only deliver 2 x 70W. Therefore, 70W would be the minimum handling capacity for these speakers.
(Please refer to the instruction manual of the amplifier being used to find the power output at 4Ω, 8Ω, etc)
When 2 speakers are connected together in parallel (that is “+” to “+” and “-” to “-”), the electricity from the amplifier can flow through 2 routes instead of one. Having twice the number of routes to flow through effectively, means that it is half as difficult for the electricity to get around the circuit. Therefore, the impedance (resistance to flow) is halved when 2 of the same type speaker are linked together in parallel.
For 2 speakers with 8Ω impedance, the overall impedance (or combined load) will be 4Ω, allowing the 100W amplifier to deliver its full output across this pair of speakers. The power will be shared, so each speaker will receive 50W (even though both are capable of handling up to 70W).
Impedance is measured in Ohms (Ω). Higher impedance opposes the output of the amplifier more, causing it to deliver less power, whereas lower impedance allows the amplifier to deliver more power.
The amplifier needs this impedance to stop itself from over-working and burning itself out, and is an important consideration when matching amplifiers and speakers together in a system.
Standard Low Impedance Speakers
TeCHNICAL DATA | tYPeS of SYSteM
53tYPeS of SYSteM | TeCHNICAL DATA
Types of System
20Wmax. + 15W + 20Wmax. + 5W + 20W + 10W = 90W
100WAmplier Attenuator
0 - 20WAttenuator
0 - 20W15W
5W
20W10W
100V line set-up with multiple tappingsWired in parallel and tapped to 90% of the amplfifiers max. power output
For many applications, it is necessary to drive many speakers with a single amplifier, giving greater coverage to multiple rooms or over a given area. Constant voltage systems (usually 100V line) employ a transformer in the amplifier to convert the output to high impedance and a corresponding transformer in each speaker to tap off the required power from the amplifier.
Theoretically, this allows a large number of speakers to be driven by one amplifier, so long as the overall power being tapped by the speakers is within the amplifier’s output capacity (usually 90% of the amplifier’s maximum rated output).
In addition, the transformers in each speaker may have tappings at different points along the primary coil, which effectively draw different Wattages from the amplifier. For example, a 10W speaker may also have settings for 5W or 2.5W.
The speaker output may also be varied using remote volume controls, known as attenuators, but these should be considered to be at their maximum volume output when choosing an amplifier to drive the speakers.
If more speakers are required beyond 90% of the 100V amplifier’s maximum output, a slave amplifier may be employed to drive these.
The slave amplifier is simply linked from the line output of the main amplifier, to which another series of speakers are then linked to, in the same way the speaker are from the main amplifier.
100V Line Speakers
100WAmplier
20W20W20W 20WMAIN
100WAmplier
20W20W20W 20WSLAVE
Line input
Line output
Extended 100V line set-upMain 4 speaker system with additional 4 speaker set and slave amplifier
100WAmplier
20W20W20W 20W
Standard 100V line set-upTotal tapped power: 80W
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
54
Types of System
Dispersion Angles
POW
ER SUPPLY
POW
ER SUPPLY
POW
ER SUPPLY
POW
ER SUPPLY
POW
ER SUPPLY
AMP AMP AMP AMP AMP
SIGNAL
Individual active speakers
SIGNAL
POW
ER SUPPLY
AMP
POW
ER SUPPLY
AMP
POW
ER SUPPLY
AMP
Active speakers with satellites
Active speakers contain their own amplifier to drive the speaker, which will be matched by impedance and power handling. Some active models contain an amplifier that can also drive another passive speaker (satellite). The main advantage of this type of system is that there is no need for
separate amplifiers, which also means that the system can be expanded by simply adding more active speakers and cascading the signal from one to the next. However, each speaker also requires power from the mains, so this should be considered when planning an active speaker installation.
The spacing between speakers should be the distance between the dispersion overlap at the listener’s height.
Calculating the spacing requires trigonometry (using Tangent) in the following equation.
Active Speakers
Calculating the spacing required in-between speakers using the dispersion angle
(Speaker height – Listener height) x TAN (dispersion angle / 2) x 2
Example: (2.8 – 1.5) x TAN (45º) x 2 1.3 x 1 x 2 = 2.6m apart (speaker spacing)
TeCHNICAL DATA | tYPeS of SYSteMRo
om H
eigh
t2.
8m
List
ener
Hei
ght
1.5m
Dispersion90º
Speaker spacing
55iP ratingS | generaL conSiderationS | TeCHNICAL DATA
IP RatingsTo help determine the suitability of a speaker or other product for use in certain environments, the IP code (Ingress Protection Rating) has been introduced as the international standard rating for a product’s protection against damage from foreign objects and water ingress.
The IP rating is made up of two numbers; the first relates to ingress of foreign objects, the second relates to water ingress.
General Installation Considerations1. Do not run microphone cables
near mains, data, telephone or 100V line cables
2. Do not run 100V line cables near data, telephone or other low voltage cables
3. Do not exceed 90% of the amplifiers output power when using 100V line (speech only)
4. Do not exceed 70% of the amplifiers output power when using 100V line (high level background music)
5. Do not use re-entrant horn loudspeakers for background music unless the loudspeaker has been specifically designed for this purpose
6. Avoid jointing microphone cable. When this is unavoidable make sure a good screened connector is used (eg: XLR)
7. Always use a balanced or floating low impedance microphone terminating into a balanced input on long microphone cable runs
8. Ensure that all loudspeakers are in-phase
9. Ensure that there are no short circuits on the loudspeaker line before connection to the amplifier
10. For outdoor, humid or dusty environments, ensure that the speaker units used have an adequate IP rating for protection, and that all amplifiers and rack components are completely sheltered from ingress
11. Secure amplifiers and other rack components in an appropriate case or cablinet capable of supporting the weight and giving adequate cooling ventilation
12. Ensure correct AC voltage and adequate current rating at the mains supply for all amplifiers and rack components
13. Only use the mains leads supplied with equipment or of equal compliance and current capacity
14. Fix all speaker components securely to walls and ceilings using appropriate fixings for the substrate, and employ safety wires wherever possible
Protection against foreign objects ingress
0 Not protected
1 Protection from non-deliberate ingress of solid objects greater than 50mmØ
2 Protection from non-deliberate ingress of solid objects greater than 12.5mmØ
3 Protection from non-deliberate ingress of solid objects greater than 2.5mmØ
4 Protection from non-deliberate ingress of solid objects greater than 1mmØ
5 Protection from ingress of an amount of dust that would compromise operation
6 Fully protected against ingress of dust
Protection against water ingress
0 Not protected
1 Protection from water dripping vertically
2 Protection from water dripping vertically when tilted at 15º
3 Protection from sprayed water from up to 60º angle
4 Protection from splashed water from any direction
5 Protection from water projected from a 6.3mm nozzle in any direction
6 Protection from powerful water jet from a 12.5mm nozzle in any direction
7 Protection against immersion in 1m of water up to 30mins
8 Protection against complete, continuous submersion in water beyond 1m
adastra.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
56
Glossary of Terms
2-way speaker – A 2-way speaker has two drivers, a tweeter to handle high frequencies, and a woofer to handle mid to low frequencies.
Background music – Music that is intended to provide an unobtrusive ambient atmosphere to a location.
Crossover - A circuit that divides the frequency spectrum into two or more parts. A crossover acts as a filter, allowing certain frequencies to pass through to the speaker while blocking others, sending only high frequencies to the tweeter and only low frequencies to the woofer.
Decibel (dB) - a unit used to measure the intensity of a sound or the power level of an electrical signal by comparing it with a given level on a logarithmic scale.
Dispersion – The degree of which a speaker’s sound is spread over the listening area.
Driver – Any individual device on a loudspeaker that contributes to the creation of sound, also referred to as woofer or tweeter.
Dynamic range - the ratio between the largest and smallest possible values of sound.
Frequency response – Measured in Hertz (Hz). The human ear responds to frequencies from 20Hz to 20kHz (approx). A speaker’s frequency response indicates how much of that range can be reproduced.
Hertz (Hz) – A unit used to measure sound frequency.
Impedance – The amount of resistance to the flow of current, measured in Ohms (Ω).
In-ceiling/In-wall speakers – Speakers that have been specifically designed for installation in a ceiling or wall to mount flush. The cavity in the ceiling or wall acts as a cabinet, so the speakers can produce more bass compared to standalone speakers.
Neodymium - A material used in some speaker magnets. Neodymium magnets are smaller and more powerful than conventional speaker magnets.
Ohms (Ω) – The measurement of electrical resistance. Often used to show the impedance of a speaker coil.
Outdoor speakers - Speakers that are designed specifically for placement in outdoor environments. Many outdoor speakers are designed to project sound over a larger area and to provide a little more bass than typical indoor speakers. They are also built to be weather resistant.
Power handling - A measure of how much amplifier power, in watts, a speaker can take before it is damaged.
RMS - A term used to indicate the average level of power that a receiver or amplifier can sustain over a given period of time. Average power ratings provide a more realistic assessment of your amp’s performance than peak power since an amp can only sustain peak power for a short period of time. RMS stands for “root mean square,” which is one of the mathematical methods used to calculate an amp’s average power output. While it isn’t an accurate descriptor of the measurements themselves, it’s commonly used throughout the industry to denote the average power rating.
Satellite speaker - Small speakers generally used as surround speakers placed or mounted in various locations (hence the name “satellite”) around a room for a home theatre setup. Because they tend to have limited bass response, they’re often designed to be used with a matching subwoofer.
Sensitivity - Sensitivity ratings shows how effectively a speaker converts power (watts) into volume (decibels). The higher the rating, the louder your speakers will play with a given amount of amplifier power. Sensitivity is often measured by driving a speaker with 1W and measuring the loudness in decibels at 1m and described as SPL (sound pressure level).
Stereo system - Made up of two speakers; one to play the left channel of sound and a second to play the right channel sound. Stereo speaker setups are the most common for music listening, since most music is mixed for stereo, as opposed to mono (single-channel) or multi-channel surround recordings.
Subwoofer - A speaker specially designed to reproduce a range of very low frequencies only (the bass). The typical range for a subwoofer is about 20-200Hz. A “powered subwoofer” includes a built-in amplifier to drive the speaker.
Tappings – 100V line speakers can have multiple power settings. For example: 20W, 10W, 5W, 2.5W
Terminals – Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors. Binding post terminals are a sturdier, more versatile type of speaker jack, often found on higher-quality speakers and receivers, and on most amplifiers. They’re threaded, so you can tighten them down against the wire or connector for a tight connection.
Transient - A short-lived aspect of a signal, such as the attack and decay of musical tones. A speaker that can react quickly to rapid changes in the music is said to have good “transient response.”
Tweeter - A small, lightweight driver that reproduces the highest musical frequencies, like violins, cymbals, female vocals, etc. The typical range for a tweeter is everything above 2,000Hz approx.
Voice coil - The cylindrical coil of wire that moves in the magnetic field of a dynamic driver. The voice coil is bonded to the diaphragm, which actually produces the sound.
Watt - A unit of power. Equal to the power in a circuit in which a current of one ampere flows across a potential difference of one volt.
Woofer - A type of driver that features a cone-shaped diaphragm, commonly used for producing the mid and low frequency portions of the music signal.
TeCHNICAL DATA | gLoSSarY of terMS
INDeX
Alphabetical IndexStock code Index100.031UK . . . . . .5100.032UK . . . . 11100.898UK . . . . 16100.899UK . . . . 16100.901UK . . . . 16100.902UK . . . . 16100.904UK . . . . 16100.905UK . . . . 16100.907UK . . . . 16100.908UK . . . . 16100.910UK . . . . 16100.911UK . . . . 16103.012UK . . . . 22103.015UK . . . . 22125.030UK . . . . . .9125.032UK . . . . . .9125.050UK . . . . . .9125.061UK . . . . . .9125.063UK . . . . . .9129.130UK . . . . 22129.131UK . . . . 22129.133UK . . . . 22129.134UK . . . . 22129.207UK . . . . 22129.208UK . . . . 22170.145UK . . . . 14170.146UK . . . . 14170.164UK . . . . 14170.165UK . . . . 14170.166UK . . . . 14710.625UK . . . . 47853.011UK . . . . 46853.014UK . . . . 46853.017UK . . . . 46853.020UK . . . . 46853.023UK . . . . 46853.026UK . . . . 46853.029UK . . . . 46853.032UK . . . . 46853.035UK . . . . 47853.038UK . . . . 47853.041UK . . . . 47853.051UK . . . . 46853.055UK . . . . 47853.071UK . . . . 47853.078UK . . . . 46853.079UK . . . . 46952.001UK . . . . 42952.004UK . . . . 42952.016UK . . . . 42952.019UK . . . . 43952.066UK . . . . 24952.079UK . . . . 25952.082UK . . . . 25952.085UK . . . . 25952.088UK . . . . 25952.095UK . . . . 24952.098UK . . . . 24952.101UK . . . . 24952.110UK . . . . 26952.126UK . . . . 43952.132UK . . . . 13952.133UK . . . . 12952.134UK . . . . 12952.146UK . . . . 13952.147UK . . . . 13952.153UK . . . . . .7952.155UK . . . . . .7
952.161UK . . . . . .6952.163UK . . . . . .6952.165UK . . . . . .6952.166UK . . . . . .6952.167UK . . . . . .6952.168UK . . . . . .8952.170UK . . . . 21952.173UK . . . . 21952.176UK . . . . . .8952.180UK . . . . . .8952.184UK . . . . . .7952.190UK . . . . 50952.193UK . . . . 50952.197UK . . . . 48952.201UK . . . . 26952.207UK . . . . 26952.210UK . . . . 26952.216UK . . . . 26952.231UK . . . . 23952.237UK . . . . 23952.241UK . . . . 21952.243UK . . . . 21952.248UK . . . . 24952.255UK . . . . 25952.256UK . . . . 25952.295UK . . . . 46952.306UK . . . . 23952.345UK . . . . 48952.352UK . . . . 49952.353UK . . . . 49952.400UK . . . . 40952.403UK . . . . 40952.409UK . . . . 41952.410UK . . . . 39952.413UK . . . . 41952.415UK . . . . 41952.417UK . . . . 41952.426UK . . . . 10952.427UK . . . . 10952.429UK . . . . 10952.430UK . . . . 10952.434UK . . . . 47952.437UK . . . . 47952.439UK . . . . 30952.440UK . . . . 47952.443UK . . . . 47952.446UK . . . . 47952.461UK . . . . 47952.464UK . . . . 47952.467UK . . . . 47952.470UK . . . . 47952.479UK . . . . 47952.518UK . . . . 18952.528UK . . . . . .4952.534UK . . . . . .4952.537UK . . . . . .5952.543UK . . . . . .4952.547UK . . . . . .3952.548UK . . . . . .3952.550UK . . . . 45952.551UK . . . . 45952.553UK . . . . 45952.554UK . . . . 45952.556UK . . . . 45952.557UK . . . . 45952.559UK . . . . 45952.560UK . . . . 45952.562UK . . . . 45
952.563UK . . . . 45952.565UK . . . . 45952.566UK . . . . 45952.568UK . . . . 45952.569UK . . . . 45952.570UK . . . . 46952.572UK . . . . 46952.574UK . . . . 46952.576UK . . . . 46952.584UK . . . . 46952.586UK . . . . 46952.588UK . . . . 46952.590UK . . . . 46952.592UK . . . . 46952.594UK . . . . 46952.596UK . . . . 46952.600UK . . . . 44952.603UK . . . . 44952.710UK . . . . 17952.711UK . . . . 17952.712UK . . . . 17952.713UK . . . . 17952.714UK . . . . 17952.715UK . . . . 17952.716UK . . . . 17952.717UK . . . . 17952.801UK . . . . 43952.804UK . . . . 43952.810UK . . . . 18952.811UK . . . . 18952.812UK . . . . 18952.813UK . . . . 18952.814UK . . . . 18952.815UK . . . . 18952.816UK . . . . 18952.817UK . . . . 18952.820UK . . . . 19952.821UK . . . . 19952.827UK . . . . 50952.854UK . . . . 34952.866UK . . . . 34952.887UK . . . . 20952.888UK . . . . 20952.942UK . . . . 20952.943UK . . . . 20952.960UK . . . . 15952.961UK . . . . 19952.962UK . . . . 15952.963UK . . . . 19952.964UK . . . . 15952.965UK . . . . 15952.979UK . . . . 37952.980UK . . . . 37953.019UK . . . . 35953.020UK . . . . 36953.022UK . . . . 36953.100UK . . . . 28953.101UK . . . . 28953.102UK . . . . 28953.110UK . . . . 29953.111UK . . . . 29953.112UK . . . . 29953.120UK . . . . 31953.121UK . . . . 31953.122UK . . . . 31953.141UK . . . . 30953.151UK . . . . 32
# 100V line mixer amp with sound source . . . .30100V line mixer amplifiers . . . . . . . . . . . . . .28-30100V line slave amplifiers . . . . . . . . . . . 28, 31-32100V line speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8, 10, 12-13, 15, 17-21, 24-25100V line transformers. . . . . . . . . . . . . . . . . . . . .47100V line volume controls . . . . . . . . . . . . . . . . .4719” Blanking panels . . . . . . . . . . . . . . . . . . . . . . . .4619” Data cabinets . . . . . . . . . . . . . . . . . . . . . . . . . .4419” Equipment racks . . . . . . . . . . . . . . . . . . . . . . .4519” metal doors. . . . . . . . . . . . . . . . . . . . . . . . . . . .4619” Rack accessories . . . . . . . . . . . . . . . . . . . .44-4719” Rack drawer . . . . . . . . . . . . . . . . . . . . . . . . . . .4619” rack security cover . . . . . . . . . . . . . . . . . . . . .4719” support modules . . . . . . . . . . . . . . . . . . . . . .4719” support shelf . . . . . . . . . . . . . . . . . . . . . . . . . .4719” Vented panels . . . . . . . . . . . . . . . . . . . . . . . . .461U cable management bar . . . . . . . . . . . . . . . . .471U patch panels . . . . . . . . . . . . . . . . . . . . . . . . . . .46
A Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-37Array brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
B Background speakers . . . . . . . . . . . . . . . . . . .14-20Blanking panels . . . . . . . . . . . . . . . . . . . . . . . . . . .46Boundary microphones. . . . . . . . . . . . . . . . . . . .48Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 22
C Cabinets for 19” equipment . . . . . . . . . . . . . . . .44Cable management . . . . . . . . . . . . . . . . . . . . . . .47Ceiling speakers . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Column speakers . . . . . . . . . . . . . . . . . . . . . . . . . .21Conference microphones . . . . . . . . . . . . . . . . . .49Corner speakers . . . . . . . . . . . . . . . . . . . . . . . .12-13
D Data cabinet accessories . . . . . . . . . . . . . . . .45-47Data racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45DT50 bag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40DT50 PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
E Equipment racks . . . . . . . . . . . . . . . . . . . . . . . . . .45
F Fire domes for speakers. . . . . . . . . . . . . . . . . . . . . 6
H H25 PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Horns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-26
I Induction loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-34Intercom microphone . . . . . . . . . . . . . . . . . . . . . . . . . . 50
L Line splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Low impedance speakers 3-5, 9, 11, 16, 18, 23
M Marine speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Megaphones . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . .48-50Microphones: Boundary . . . . . . . . . . . . . . . . . . .48Microphones: Conference. . . . . . . . . . . . . . . . . .49Microphones: Intercom . . . . . . . . . . . . . . . . . . . .50Microphones: Paging . . . . . . . . . . . . . . . . . . .49-50Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Mixer amplifiers . . . . . . . . . . . . . . . . . . . . . . . .28-30Mobile PA amplifier. . . . . . . . . . . . . . . . . . . . . . . .30Multimedia players . . . . . . . . . . . . . . . . . . . . . . . .37
N Noise pollution control system . . . . . . . . . . . . .43
P PA amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30PA systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-41Paging microphones . . . . . . . . . . . . . . . . . . .49-50Patch panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46PAV8 PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Pendant speakers. . . . . . . . . . . . . . . . . . . . . . . . . .10Portable PA. . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-41
R Rack accessories . . . . . . . . . . . . . . . . . . . . . . . .44-47Rack cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Rack drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Rack fixing kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Rack security cover . . . . . . . . . . . . . . . . . . . . . . . .47Radio tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Relay volume controls . . . . . . . . . . . . . . . . . . . . .47Remote indicator . . . . . . . . . . . . . . . . . . . . . . . . . .43
S Shelves for data cabinets . . . . . . . . . . . . . . . . . .47Slave amplifiers. . . . . . . . . . . . . . . . . . . . . 28, 30-31Sound source . . . . . . . . . . . . . . . . . . . . . . . . . .37-38Speaker brackets . . . . . . . . . . . . . . . . . . . . . . 13, 22Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-26Speakers: 100V line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8, 10, 12-13, 15, 17-21, 24-25Speakers: Background . . . . . . . . . . . . . . . . . . . . . .14-20 Ceiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 Column. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Corner. . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13 Horns. . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-26 Low impedance. . . . . 3-5, 9, 11, 16, 18, 23 Marine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Support shelf. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47Swivel brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
TTransformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
V Vented panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Volume controls . . . . . . . . . . . . . . . . . . . . . . . . . . .47
W Wall speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Wireless microphones . . . . . . . . . . . . . . . . . . . . .41
ZZoning mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
adastra.avsl.com group brandan GR
OU
P
AVSL Group Ltd
Containerbase, Barton Dock Road
Manchester M41 7BQ (UK)
T +44 (0) 845 270 2411
F +44 (0) 845 270 2433
E sales@avslgroup.com
www.avsl.comAll information is correct at time of going to press, we reserve the right to alter product specifications at any time and for any reason without liability. Product illustrations and effects may be simulated.Errors and omissions excepted. Copyright© 2014. AVSL Group Ltd.Version ADA010714 (v3)
BBC
Blackpool Pleasure Beach
Blue Inc
BP Petrol
Cineworld
Costa Coffee
Flamingo Land
Frankie & Bennies
Gala Bingo
Hilton Hotels
Ikea
Isle of Man TT
Lifestyle Fitness
M&S
Marstons Pubs
Piccolino Restaurants
Pure Gym
Reading Football Club
River Island
Sainsburys
Spearmint Rhino
Starbucks
Tesco Petrol
The Sandcastle Blackpool
Willerby Holiday Homes
Adastra products are installed in many establishments and locations around the UK, including: