0 7.5*$ -*26*% $0/530- */%6453: $0 -5% · Gauge 1/2'' (12.70MM) 1'' (25.40MM) Color ID mm Package 21G VCT21050 VCT21100 Grey 0.51 100pcs/bag 25G VCT25050 VCT25100 Pink 0.30 100pcs/bag
Post on 03-Jun-2020
1 Views
Preview:
Transcript
NINGBO VMATIC LIQUID CONTROL INDUSTRY CO.,LTD
Guage1/4"
(6.35MM)
1/2''
(12.70MM)
1"
(25.40MM)
1.5"
(38.10MM)
2"
(50.80MM)
ID
MM
OD
MMColor Package
14G VCL14025 VCL14050 VCL14100 VCL14150 VCL14200 1.55 2.10 Olive 100pcs/bag
15G VCL15025 VCL15050 VCL15100 VCL15150 VCL15200 1.36 1.80 Amber 100pcs/bag
18G VCL18025 VCL18050 VCL18100 VCL18150 VCL18200 0.90 1.20 Green 100pcs/bag
20G VCL20025 VCL20050 VCL20100 VCL20150 VCL20200 0.62 0.90 Pink 100pcs/bag
21G VCL21025 VCL21050 VCL21100 VCL21150 VCL21200 0.51 0.82 Purple 100pcs/bag
22G VCL22025 VCL22050 VCL22100 VCL22150 VCL22200 0.41 0.73 Blue 100pcs/bag
23G VCL23025 VCL23050 VCL23100 VCL23150 VCL23200 0.33 0.63 Orange 100pcs/bag
25G VCL25025 VCL25050 VCL25100 VCL25150 VCL25200 0.25 0.51 Red 100pcs/bag
27G VCL27025 VCL27050 VCL27100 VCL27150 VCL27200 0.21 0.40 Clear 100pcs/bag
30G VCL30025 VCL30050 VCL30100 VCL30150 VCL30200 0.16 0.30 Lavender 100pcs/bag
32G VCL32025 VCL32050 VCL32100 VCL32150 VCL32200 0.11 0.23 Yellow 100pcs/bag
34G VCL34025 VCL34050 VCL34100 VCL34150 VCL34200 0.08 0.20 Dark Green 100pcs/bag
色卡
TE Premier Dispensing Tips
Specification :
Color Coding and Gauge
Gauge Color
The TE needle series consist of a stainless-steel shaft with a double helix
polypropylene hub. This premier line of dispensing needles is burr-free, and electro-
polished shaft for unobstructed and consistent material flow. In addition they are
silicone and chloride free. Designed to dispense most viscosity fluids and adhesives
and safe for use to 100 psi. Package: 100pcs/bag
The following color for reference:
14Olive
15Amber
18Green
20Pink
21Purple
22Blue
23Orange
25Red
27Clear
30Lavender
32Yellow
Gauge Color
14G Olive
15G Amber
18G Green
20G Pink
21G Purple
22G Blue
23G Orange
25G Red
27G Clear
30G Lavender
TE Premier Bent Dispensing Tips TE
Specification :
The TE needle series consist of a stainless-steel shaft with a double helix
polypropylene hub. This premier line of dispensing needles is burr-free, and electro-
polished shaft for unobstructed and consistent material flow. In addition they are
silicone and chloride free. Designed to dispense most viscosity fluids and adhesives
and safe for use to 100 psi. These tips are 45 or 90 degree bend which are suitable
for applying fluids inside the bore of products or under components.Package:
100pcs/bag
1/2'' 45 Dgree Bent 1/2‘’ 90 Dgree Bent 1‘’ 45 Dgree Bent 1‘’ 90 Dgree Bent
VCW1405045 VCW1405090 VCW1410045 VCW1410090
VCW1505045 VCW1505090 VCW1510045 VCW1510090
VCW1805045 VCW1805090 VCW1810045 VCW1810090
VCW2005045 VCW2005090 VCW2010045 VCW2010090
VCW2105045 VCW2105090 VCW2110045 VCW2110090
VCW2205045 VCW2205090 VCW2210045 VCW2210090
VCW2305045 VCW2305090 VCW2310045 VCW2310090
VCW2505045 VCW2505090 VCW2510045 VCW2510090
VCW2705045 VCW2705090 VCW2710045 VCW2710090
VCW3005045 VCW3005090 VCW3010045 VCW3010090
Color Coding and Gauge
The following color for reference:
Gauge Color
14 Olive
15 Amber
18 Green
20 Pink
21 Purple
22 Blue
23 Orange
25 Red
27 Clear
30 Lavender
Gauge Part # Color Package
14G VCX14 Olive 100pcs/bag
16G VCX16 grey 100pcs/bag
18G VCX18 green 100pcs/bag
20G VCX20 pink 100pcs/bag
22G VCX22 blue 100pcs/bag
25G VCX25 red 100pcs/bag
Gauge1/4"
(6.35MM)
1/2"
(12.70MM)
1"
(25.40MM)
1.5"
(38.10MM)
2"
(50.80MM)Color ID mm OD mm Package
14G VCR14025 VCR14050 VCR14100 VCR14150 VCR14200 Olive 1.40 1.80 100pcs/bag
15G VCR15025 VCR15050 VCR15100 VCR15150 VCR15200 Amber 1.35 1.65 100pcs/bag
18G VCR18025 VCR18050 VCR18100 VCR18150 VCR18200 Green 0.80 1.46 100pcs/bag
20G VCR20025 VCR20050 VCR20100 VCR20150 VCR20200 Pink 0.62 0.90 100pcs/bag
22G VCR22025 VCR22050 VCR22100 VCR22150 VCR22200 Blue 0.41 0.73 100pcs/bag
25G VCR25025 VCR25050 VCR25100 VCR25150 VCR25200 Red 0.25 0.51 100pcs/bag
High quality tapered tips in gauge sizes from 14 to 25. Suitable for many fluids
including solder pastes, fluxes, gels, epoxies, grease, compounds, particle filled
materials, adhesives, silicones, sealants and RTVs. Double helix locking luer thread
provides safe attachment to all syringes and valves.Package: 100pcs/bag
TT Tapered Tips
ID mm
1.50+/-0.03
1.20+/-0.03
0.84+/-0.03
0.63+/-0.03
0.41+/-0.03
0.28+/-0.03
PP Flexible Dispensing Tips
Specification :
Polypropylene tips include a plastic double helix locking hub, with a polypropylene
canula (tubing) based on gauge size. These tips are excellent for dispensing into
small areas or through holes. The luer locking helix thread prevents the tip from
working loose under pressure. Flexible needle tips for use with most fluids and
especially good for reactive adhesives and moisture sensitive fluids such as
cyanoacrylate instant glues and most solvent based fluids.Package: 100pcs/bag
Specification :
Gauge1/2''
(12.70MM)
1''
(25.40MM)Color ID mm Package
21G VCT21050 VCT21100 Grey 0.51 100pcs/bag
25G VCT25050 VCT25100 Pink 0.30 100pcs/bag
27G VCT27050 VCT27100 Red 0.20 100pcs/bag
Gauge1/4''
(6.35MM)
1/2''
(12.70MM)
1''
(25.40MM)
1.5''
(38.10MM)
2"
(50.80MM)ID mm OD mm
10G VCB10025 VCB10050 VCB10100 VCB10150 VCB10200 3.50 4.00
11G VCB11025 VCB11050 VCB11100 VCB11150 VCB11200 3.00 3.50
12G VCB12025 VCB12050 VCB12120 VCB12150 VCB12200 2.40 2.90
13G VCB13025 VCB13050 VCB13130 VCB13150 VCB13200 1.90 2.40
14G VCB14025 VCB14050 VCB14140 VCB14150 VCB14200 1.60 2.10
15G VCB15025 VCB15050 VCB15150 VCB15150 VCB15200 1.40 1.80
18G VCB18025 VCB18050 VCB18180 VCB18150 VCB18200 0.90 1.26
20G VCB20025 VCB20050 VCB20200 VCB20150 VCB20200 0.62 0.90
21G VCB21025 VCB21050 VCB21210 VCB21150 VCB21200 0.51 0.82
22G VCB22025 VCB22050 VCB22220 VCB22150 VCB22200 0.41 0.73
23G VCB23025 VCB23050 VCB23230 VCB23150 VCB23200 0.33 0.63
25G VCB25025 VCB25050 VCB25250 VCB25150 VCB25200 0.25 0.51
27G VCB27025 VCB27050 VCB27270 VCB27150 VCB27200 0.21 0.40
30G VCB30025 VCB30050 VCB30300 VCB30150 VCB30200 0.16 0.30
32G VCB32025 VCB32050 VCB32320 VCB32150 VCB32200 0.11 0.23
High Precision All Metal Tips
12pcs/box
12pcs/box
Specification :
TEF Teflon Lined Tips
Specification :
Package
12pcs/box
12pcs/box
The Teflon Lined Tip is suited to the controlled application of Cyanoacrylates,
Solvents, Activators, Primers and other liquids. The crimped Teflon inner tube
prevents reactive Cyanoacrylates from clogging during application. The tips are
silicone free and chloride free to prevent contamination of any liquid
dispensed.Package: 100pcs/bag.
The high precision all metal tips consist of a stainless-steel luer lock hub with
stainless steel precision shaft. This high quality line of dispensing needles is burr-
free, and electro-polished shaft for unobstructed and consistent material flow.
Suitable for dispensing most fluids, SMT adhesives and solvents. Industrial grade
safe for use to 100 psi. Ideal for use on robot dispensing systems as tips are cut
high precision for total consistency. Package:12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
12pcs/box
Gauge1/4''
(6.35MM)
1/2''
(12.70MM)
1''
(25.40MM)
1.5''
(38.10MM)
2"
(50.80MM)ID mm OD mm
18G VCS18025 VCS18050 VCS18100 VCS18150 VCS18200 0.90 1.26
20G VCS20025 VCS20050 VCS20100 VCS20150 VCS20200 0.62 0.90
21G VCS21025 VCS21050 VCS21100 VCS21150 VCS21200 0.51 0.82
22G VCS22025 VCS22050 VCS22100 VCS22150 VCS22200 0.41 0.73
23G VCS23025 VCS23050 VCS23100 VCS23150 VCS23200 0.33 0.63
25G VCS25025 VCS25050 VCS25100 VCS25150 VCS25200 0.25 0.51
27G VCS27025 VCS27050 VCS27100 VCS27150 VCS27200 0.21 0.40
30G VCS30025 VCS30050 VCS30100 VCS30150 VCS30200 0.16 0.30
32G VCS32025 VCS32050 VCS32100 VCS32150 VCS32200 0.11 0.23
Gauge Width mm Color Package
10G 3.10 Metal 12pcs/box
11G 2.70 Metal 12pcs/box
12G 2.10 Metal 12pcs/box
13G 1.60 Metal 12pcs/box
14G 1.30 Metal 12pcs/box
15G 1.10 Metal 12pcs/box
12pcs/box
12pcs/box
15G VCPB15050 VCPB15100
12pcs/box
Flat Dispensing Tips
Oval tips applies flat ribbons of thick fluids like pastes, sealants and epoxies.
Gauge 1/2'' 1''
All Metal Flat Tips Plastic Flat Tips Thickness mm
VCMB10 VCPB10 0.30
VCMB11 VCPB11 0.30
VCMB12 VCPB12 0.30
VCMB13 VCPB13 0.30
VCMB14 VCPB14 0.30
VCMB15 VCPB15 0.30
Twince/multiple needle tips can provide multiple dispensing in narrow space. Length,
quantity as well as arraying from can be customized.
Oval tips applies flat ribbons of thick fluids like pastes, sealants and epoxies.
12pcs/box
12pcs/box
All Metal Flat Tips
Flat Dispensing Tips
Package
12pcs/box
12pcs/box
12pcs/box
12pcs/box
Dual Metal Dispensing tips
Part No. Shape W(mm) Gauge
VC-BT001 Roud 2mm 20G-27G
VC-BT002
(stainless
steel)Roud 3mm 18G-27G
VC-BT003 Round ¢3mm 18G-27G
VC-BT004 Flat 3.5mm 18G-27G
VC-BT005 Round 4mm 14G-27G
VC-BT006 Round 5mm 14G-27G
VC-BT007 Flat 5mm 14G-27G
VC-BT008 Flat 6mm 14G-27G
VC-BT009 Round 6mm 14G-27G
VC-BT010 Flat 7mm 14G-27G
VC-BT011 Flat 10mm 14G-27G
VC-BT012 Flat 11mm 14G-27G
VC-BT013 Round 4mm 14G-27G
VC-BT014 Flat 4mm 18G-27G
VC-BT015 Flat 5mm 14G-27G
VC-BT016 Flat 6mm 14G-27G
Brush Tip Needle
L X D(mm) Bristle
Use these double helix Brush Tips for “spread” applications such as glues and other
materials. Brush is made of nylon. Supplied in a pack of 12 and also available in a
pack of 1. High quality products for multi-use with all guns, pneumatic dispensers,
valves and robots. Tip length of 1.5". Features a threaded luer lock hub for safe
attachment. Soft bristle or stiff bristle brushes. Silicone free and safe for use up to
100 psi. Suitable for use with primers, activators, coatings, oils, lubricants,
adhesives, solvents, inks and paints.
40 X ¢5mmNylon
White Soft and Yellow Stiff
42 X ¢4mmNylon
White Soft and Yellow Stiff
41 X ¢5mmNylon
White Soft and Yellow Stiff
41 X ¢5mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
42 X ¢6mmNylon
White Soft and Yellow Stiff
Remark:
Gauge:14G,15G,18G,20G,21G,22G,23G,25G,27G,30G,32G,34G
Gauge1.5"
38mm
2.0"
51mm
2.5"
63.5mm
3.0"
76mmColor
ID
mmPackage
20G VCW20150 VCW20200 VCW20250 VCW20300 White 0.62 100pcs/bag
25G VCW25150 VCW25200 VCW25250 VCW25300 White 0.41 100pcs/bag
27G VCW27150 VCW27200 VCW27250 VCW27300 White 0.25 100pcs/bag
Vol. Packag
3cc 50pcs/bag
5cc 50pcs/bag
10cc 50pcs/bag
30cc 50pcs/bag
55cc 50pcs/bag
plastic flexible needle
3.5" 90mm
VCW20350
VCW25350
VCW27350
VCAS5C
VCAS10C
VCAS30C
VCAS55C
Syringe(EFD)
Specification :
Clear Black Amber Dark Amber
Dispensing syringe barrels are silicone and chloride- free and designed to work with
syringeguns and pneumatic dispensers. The syringe barrels are made from low
friction polypropylene to ensure accuracy, repeatability and productivity. Features a
luer lock for secure dispense tip attachment. Available in 3 colours: Natural for most
generic applications, Amber provides protection of UV/visible light block (up to
520nm), but with the ability to see material inside the syringe barrel, and Black for
total light block. Maximum operating pressure 100 psi (6.9bar). Pistons available for
all barrel sizes as well as end caps and adapter assemblies.Package:50pcs/bag
VCAS3C VCAS3B VCAS3A VCAS3D
VCAS5B VCAS5A VCAS5D
VCAS10B VCAS10A VCAS10D
VCAS30B VCAS30A VCAS30D
VCAS55B VCAS55A VCAS55D
Syringe(IEI)
Specification :
Vol. Clear Green Misty Packag
3cc VCAS3C-JC VCAS3G-JC VCAS3M-JC 50pcs/bag
5cc VCAS5C-JC VCAS5G-JC VCAS5M-JC 50pcs/bag
10cc VCAS10C-JC VCAS10G-JC VCAS10M-JC 50pcs/bag
30cc VCAS30C-JC VCAS30G-JC VCAS30M-JC 50pcs/bag
50cc VCAS50C-JC VCAS50G-JC VCAS50M-JC 50pcs/bag
This plastic flexible needle is soft at the tip, suitable to fast glue and the strong
viscidity liquid such as 502 adhesive. The tip is thin and long, you could cut at your
requests. also welcome OEM for this item.
Dispensing syringe barrels are silicone and chloride- free and designed to work with
syringeguns and pneumatic dispensers. The syringe barrels are made from low
friction polypropylene to ensure accuracy, repeatability and productivity. Features a
luer lock for secure dispense tip attachment. Available in 2 colours: Natural, and
Green.Maximum operating pressure 100 psi (6.9bar). Pistons available for all barrel
sizes as well as end caps and adapter assemblies. Package:50pcs/bag
Vol. Packag
3cc 100pcs/bag
5cc 100pcs/bag
10cc 100pcs/bag
30/55cc 100pcs/bag
100pcs/bag
Specification :
Vol. Part #(Orange) Packag
3cc VCMH3
5cc VCMH5 100pcs/bag
VCRH30/55W VCRH30/55G
Re-usable end caps for sealing the top of the syringe barrel in sizes 3cc, 5cc, 10cc,
30cc and 55cc. Polyethylene Polyethylene for an air tight seal preventing any leaks
and ensuring fluids can be stored inside the barrel safely. 100pcs/bag.
Part #(White) Part #(Green)
VCRH3W
VCMH30/55
End Caps(IEI)
Hand syringe
Specification :
Vol.Clear Syringe
with Luer Lock Tip
Clear Syringe
with Blunt Slip Tip Package
1cc N VCMS1ML-WB 50pcs/bag
3cc VCMS3ML-WL VCMS3ML-WB 50pcs/bag
5cc VCMS5ML-WL VCMS5ML-WB 50pcs/bag
50pcs/bag
10cc VCMS10ML-WL VCMS10ML-WB 50pcs/bag
20cc VCMS20ML-WL VCMS20ML-WB 50pcs/bag
VCRH10W VCRH10G
30cc VCMS30ML-WL VCMS30ML-WB 50pcs/bag
50cc VCMS50ML-WL VCMS50ML-WB
End Caps(EFD)
10cc VCMH10 100pcs/bag
30/55cc
Re-usable end caps for sealing the top of the syringe barrel in sizes 3cc, 5cc, 10cc,
30cc and 55cc. Polyethylene Polyethylene for an air tight seal preventing any leaks
and ensuring fluids can be stored inside the barrel safely. 100pcs/bag
100pcs/bag
VCRH5W VCRH5G
VCRH3G
Hand syringe assemblies for use with adhesives, chemicals, solvents and pastes.
Either clear plastic barrels or clear graduated barrels including plunger rod and
rubber piston. Available in sizes 1cc to 50cc with luer lock twist tip attachment or luer
slip push on tip attachment. 50pcs/bag
Pistons ensure that the pressure is evenly spread across the fluid surface to provide
consistent dispensing. Wiper seal pistons prevent dripping and eliminate material
waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum
operating pressure is 100psi (6.9bar). 500pcs/bag
10cc VCPA10
30/55cc VCPA30/55
Packag
500pcs/bag
500pcs/bag
500pcs/bag
500pcs/bag
White
VCPA3
Vol.
3cc
5cc VCPA5
VCRP30/55
Packag
500pcs/bag
500pcs/bag
500pcs/bag
500pcs/bag
Vol.
3cc
5cc
10cc
30/50cc
White
VCRP3
VCRP5
VCRP10
Piston(EFD)
Tip Cap(IEI)
Item 产品 Part # 料号Packag
包装
Tip caps are used on the luer lock end of any sized syringe barrel, cartridge adapter
or metering valve and feature a double helix thread for secure leak free attachment.
Caps are silicone and chloride free to prevent contamination of any fluids stored
inside the barrels. 1000pcs/bag
White Tip Cap VCDT3W 1000pcs/bag
Piston(IEI)
Pistons ensure that the pressure is evenly spread across the fluid surface to provide
consistent dispensing. Wiper seal pistons prevent dripping and eliminate material
waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum
operating pressure is 100psi (6.9bar). 500pcs/bag
Vol. White Black Yellow Green Packag
3cc VCAS3W VCAS3B VCAS3Y VCAS3G 10pcs/bag
5cc VCAS5W VCAS5B VCAS5Y VCAS5G 10pcs/bag
10cc VCAS10W VCAS10B VCAS10Y VCAS10G 10pcs/bag
30cc VCAS30W VCAS30B VCAS30Y VCAS30G 10pcs/bag
Vol.
容量
Green
绿色
Packag
包装
3cc VCRS3G 10pcs/bag
5cc VCRS5G 10pcs/bag
10cc VCRS10G 10pcs/bag
30cc VCRS30G 10pcs/bag
Syringe Barrel Adapter Assemblies(EFD)
Tip Cap(EFD)
Tip caps are used on the luer lock end of any sized syringe barrel, cartridge adapter
or metering valve and feature a double helix thread for secure leak free attachment.
Caps are silicone and chloride free to prevent contamination of any fluids stored
inside the barrels.1000pcs/bag
Clear Tip Cap VC1W 1000pcs/bag
Black Tip Cap VC1B 1000pcs/bag
Item Part # Packag
Orange Tip Cap VC1O 1000pcs/bag
The connecting air link between the pneumatic syringe dispenser and the syringe
barrel. Industrial grade safe for use to 100 psi. Silicone free plastics and
components. In sizes from 3cc to 55cc. Supplied with standard EPR black rubber o-
ring. Viton o-rings replacements available for use with aggressive solvent based
fluids and adhesives that can effect standard rubbers. 10pcs/bag
The connecting air link between the pneumatic syringe dispenser and the syringe
barrel. Industrial grade safe for use to 100 psi. Silicone free plastics and
components. In sizes from 3cc to 55cc. Supplied with standard EPR black rubber o-
ring. Viton o-rings replacements available for use with aggressive solvent based
fluids and adhesives that can effect standard rubbers.10pcs/bag
Specification :
Syringe Barrel Adapter Assemblies(IEI)
Specification :
I.D.
(mm)Elements
O.D.
(mm)L(mm) Outlet I.D. A
Volume
(ml)
3 7 4.6 33.2 1.0 0.19
3 17 4.6 62.2 1.0 0.34
4 13 5.8 66.0 2.0 0.6
5.4 7 7.0 55.7 1.5 0.78
5.4 13 7.0 84.6 1.5 1.36
5.4 17 7.6 103.6 1.5 1.68
6.3 21 8.7 153.0 1.5 3.57
6.3 21 8.7 151.5 1.6 3.33
Replacement pinch tubes for VC-1212 pinch valves. Flexible and robust long life
tubes for easy installation to your metering valve or as fluid line connectors. Prices
are for sealed packs of 10. Silicone free and safe for use up to 100 psi. Suitable for
use with primers, activators, coatings, oils, lubricants, adhesives, solvents, inks and
paints.
Each polyethylene hose assembly is provided with a moulded luer lock fitting on one
or both ends. The assembly can be used with other standard luer lock connectors
and will handle up to 100 psi pressure. Simple fluid lines for connecting valves to
tanks, valve to cartridges, syringe barrels and luer lock fittings. ID:0.1'' and 0.7''.
Length:18'', 24'' and 36''.
Part No. Photo
MA 3.0-07S
MA 3.0-17S
MA 4.0-13S
Feature:
●Outer Housing: Polypropylene (PP)
●Elements: Polypropylene (PP)
●Retaining Method: Bayonet style twist-lock
●For Ratios 1:1 & 2:1
MA 5.4-07S
MA 5.4-13S
MA 5.4-17S
MA 6.3-21S
MA 6.3-21L
MA series disposable plastic static mixer feature a simple twist-lock mounting. The mixers' first element automatically aligns with the dividing
wall when used with the 50 ml cartridge, separating Part A and Part B.
MA series static mixers come in a wide variety of sizes and will mix virtually any 2-part material including epoxies, silicones, urethanes,
acrylics and polyesters.
MA series Static Mixer MA
Pinch Tube PE
I.D.
(mm)Elements
O.D.
(mm)L(mm) Outlet I.D. A
Volume
(ml)
5 24 8.0 149.0 1.5 2.3
5 32 8.0 188.0 1.5 2.8
6.35 24 10.0 185.0 1.9 4.2
6.35 32 10.0 234.0 1.9 6.6
8 24 12.0 223.0 2.4 8.5
8 32 12.0 287.0 2.4 11.5
10 24 14.0 276.0 3.0 14.6
10 32 14.0 352.0 3.0 21.8
I.D.
(mm)Elements
O.D.
(mm)L(mm) Outlet I.D. A
Volume
(ml)
5 24 8.0 149.0 1.5 2.3
5 32 8.0 188.0 1.5 2.8
6.35 24 10.0 185.0 1.9 4.2
6.35 32 10.0 234.0 1.9 6.6
6.35 48 10.5 334.0 2.2 10
8 24 12.0 223.0 2.4 8.5
8 32 12.0 287.0 2.4 11.5
10 24 14.0 276.0 3.0 16
10 32 14.0 352.0 3.0 23
10-8 12+32 14-12 409.0 2.4 19
13 24 17.0 293.0 4.0 27
13 32 17.0 379.0 4.0 34.5
13-10 12+32 17-14 499.0 7.2 37.5
MC 10-32
Part No.
MC Static Mixer MC
MC 06-32
ME/MS 10-32
ME/MS 1012-0832
Part No.
MC 10-24
ME is Blue Color, MS is Yellow Color. ME connect size is 15.9mm. MS connect size is 16.7mm
ME MSseries Static Mixer
Photo
ME/MS 05-24
ME/MS 06-48
ME/MS 13-32
ME/MS 1312-1032
ME/MS 08-24
ME/MS 08-32
ME/MS 10-24
Feature:
●Outer Housing: Polypropylene (PP)
●Elements: Polypropylene (PP)
●Retaining Method: 7/8"-9 thread
●For Ratios 1:1 & 2:1
ME/MS 05-32
ME/MS 13-24
ME/MS 06-24
ME/MS 06-32
MC disposable mixers can be used with 200ml, 400ml and other dual cartridge dispensing systems. The mixer element is designed to
provide less resistance while dispensing. This is particularly important in hand-held dispensing to minimize operator fatigue.
MC mixers come in a wide variety of sizes and will mix virtually any 2-part material including epoxy, silicone, urethane, acrylic and polyester
resins. The mixers are used for a wide range of low-pressure meter mix applications.
MC 06-32
MC 08-24
MC 08-32
Photo
MC 05-24
MC 05-32
I.D.
(mm)Elements
O.D.
(mm)L(mm) Outlet I.D. A
Volume
(ml)
5.3 16 7.6 83.0 1.5 0.15
8.7 24 11.6 150.0 1.5 3.4
MF series Static Mixer MF
MF6-16
MF8-24
LA 10-00
(Black)10mm Mixers
LA 05-00
(White)5mm Mixers
LA 06-08
(Grey)6mm and 8mm Mixers
Adapter For Mixer
Part No. Application for Mixers
Part No.
Square Static Mixer is innocated on the basis of the round ones, which is more efficient. There are 4 parts on the 工 type blade, when 2 or
above different liquid, flow past each blade, the liquid will divide to 4 parts, and each parts liquid is an even flow of requests, but round static
mixer only could divide to 2 parts.
Part No.:
Volum:
Material:
Colour:
Length:
Height:
Weight:
VCFS1/10Z
Description
Manuallly Operated Syringe Fillers for 6oz cartidge
Manuallly Operated Syringe Fillers for 12oz cartidge
Manuallly Operated Syringe Fillers for 1/10 Gallon cartidge
Specifications:
Part Number
VCFS12oZ
VCFS6oZ
Manuallly Operated Syringe Fillers
A syringe filling system from cartridges to any size syringe barrel. Material is transferred under pressure from cartridge nozzle
end to syringe tip end. This eliminates air entrapment and provides for a simple filling station. System includes a retainer, cap,
base stand, rod,retainer and cap, threaded syringe adapter fittings, selection of syringe barrels. Ideal for use with sealants,
silicones, RTVs, mastics, grease and other liquids. Also available in different size cartridges for larger batch syringe filling. Use
these systems with a 0-100 psi dispenser to provide a controlled air pulse for consistent volume filling of syringe barrels each time.
Can also use these systems with a 0-100 psi dispenser to provide a controlled air cycle for consistent volume filling of syringe
barrels each time.
•Fast and accutate filling
•Accommodates 3cc to 55cc syringes
•Simple setup and cleanup
•Switch for easy operation
Feature:
VC30CCH1
30CC or 55CC
Nylon, Polypropylene
Red/ White
Manual Syringe Gun Dispenser
• 2 sizes of gun available
•Includes syringe, piston and tips
•Powerful hand lever leverage
•Lightweight materials
•Quick syringe attachment
•Low cost solution
Feature:
Specifications:
VC10CCH1
10CC
The gun is lightweight yet robust enough for even the most demanding applications. It is portable and ideal for production work or
field work. A 7:1 leverage lever reduces hand fatigue and is a significant improvement over manual hypodermic syringes, squeeze
bottles or toothpaste type tubes.
Typical applications include RTV sealing, silicone sealing, epoxy (not rapid cure), potting, solder paste and solder flux, jointing
compounds, mastics, gel to blister packs, roach gels, adhesives, inks, UV gels and greases.
Adhesive Dispensing SyringeGuns are safe and hygienic, reducing risk of operator contact with the materials being dispensed.
They fit comfortably in the hand for use over long periods of time which minimises the risk of repetitive strain injury. The guns are
1 x 10cc or 30/55cc manual SyringeGun
1 x 10cc or 30/55cc clear syringe barrel
1 x 10cc or 30/55cc wiper piston
1 x tip cap seal
10 x needle tips (assorted gauge sizes)
135mm
115g (without syringe barrel)
Nylon, Polypropylene
Red/ White
190mm (including push rod)
135mm
115g (without syringe barrel)
190mm (including push rod)
VC10CCH1 and VC30/55CCH1 includes the following items:
Part Number Capacities Color
VC6oZ 6oz(177ml) White
VC8oZ 8oz(287ml) White
V12oZ 12oz(355ml) White
VC6oZ 6oz(177ml) Red
V8oZ 8oz(287ml) Red
VC12oZ 12oz(355ml) Red
Part Number Color
VC-SEM-E cartridges end caps White 白色 Red
VC-SEM-T cartridges tip cap Red 红色 Red
Part Number Capacities
VCMC6OZ 6oz 盎司VCMC8OZ 8oz 盎司VCMC12OZ 12oz 盎司VCMC300ML 300ml
VCMC1/10G 1/10 Gallon
Cartridge Retainer &cap
Material
Aluminum
Aluminum
Aluminum
Aluminum
Steel and Aluminum
Features:
•Clean wiping action
•Concave sides
•Releases entrapped air
•Inserts easily
Part Number
VCPPW
VCPPR
VCPPB
Color
White
Red
Black
Cartridge End and Tip Cap
Description
Features:
•Fits cartridges well
•Easy and secure fit
•Provides complete seal
Standard LPDE Wiper Plunger
Feature:
•High density natural polyethylene
•Threaded 1/4'' NPT Female outlet
•fit dispensing cartridge retainers well
Cartridges
These dispensing cartridges are suitable for a number of low-to-high viscosity materials including adhesives, dental resins, pastes,
lubricants, gels, and silicones.
Part No: VCD2121-B VCD18 VCD2121-Y VCD19 VCD30
Structure Type: Needle Off Needle Off Needle Off Needle Off Needle Off
Control Type : Double Acting Double Acting Double Acting Double Acting Single Acting
Type of Operation: A A A A A
Flow Adjustment: Available Available Unavailable Available Available
Operating Air
Source:0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa
Min.Shot Volume: 0.01ml 0.01ml 0.01ml 0.01ml 0.01ml
Operation
Viscositi:1-1.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps
Body Material SUS 304 SUS 304 SUS 304 SUS 304 SUS 304
Input Pressure: <10Kg <10Kg <10Kg <10Kg <10Kg
Inlet Outlet Size 1/8”t(f) 1/8”t(f) 6mm 1/8”t(f) 1/8”t(f)
Operating Cycle <600/min <600/min <600/min <600/min <600/min
Dimensions
(mm)
21*21
Long 130
Round ¢18
Long 120
Square □18*18
Long 150
Round ¢19
Long 165
Round ¢30
Long 140
Weight 120g 93g 188g 155g 160g
Applied Material
Good fluidity
Medium Viscosity
Grease,Alcohol,Ink
,UV Glue,Paint
Good fluidity
Medium Viscosity
Grease,Alcohol,Ink
,UV Glue,Paint, Oil
Good fluidity
Medium Viscosity
Grease,,Alcohol,In
k,UV Glue,Paint,
Oil
Good fluidity
Medium Viscosity
,Alcohol,Ink,UV
Glue,Paint, Oil
Good fluidity,
Medium
Viscosity,,Alcohol,I
nk,UV Glue,Paint,
Oil
Photos
Part No: VCH30 VC-H3030 VCH25 VCH30 VCS010
Structure Type Suck Back Suck Back Suck Back Plunger Plunger
Control Type Double Acting Double Acting Double Acting Single Acting Single Acting
Type of Operation A A A A A
Flow Adjustment Unavailable Available Unavailable Unavailable Unavailable
Operating Air
Source0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa
Min.Shot Volume 0.01ml 0.01ml 0.01ml 0.01ml 0.01ml
Operation Viscositi 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps
Body Material SUS 304 SUS 304 SUS 304 SUS 304 SUS 304
Input Pressure: <10Kg <10Kg <10Kg <10Kg <10Kg
Inlet Outlet Size 1/4'' 1/4'' 1/4'' 9mm/2.5mm m5
Operating Cycle <600/min <600/min <600/min <600/min <600/min
Dimensions
(mm)
Round ¢30
Long 150
Square □30*30
Long 135
Round ¢25
Long 150
Round ¢30
Long 122Round ¢18
Long 100
Weight 290 g 428 g 165 g 290 g 53 g
Applied Material
Bad fluidity
Medium-High
Viscosity
Grease,Silicon,Epo
pxy,
Bad fluidity
Medium-High
Viscosity
Grease,Silicon,Epo
pxy,Paint
Bad fluidity
Medium-High
Viscosity
Grease,Silicon,Epo
pxy,Oil
Bad fluidity
Medium-High
Viscosity
Grease,Silicon,Epo
pxy,
Bad fluidity
Medium-High
Viscosity
Grease,Silicon
Epopxy
Photos
Part No: VC552 VCH60 VCH3075 VC-H3242AB2 VC70
Structure Type: Diaphragm Suck Back Needle Off Suck Back Needle Off
Control Type : Single Acting Double Acting Double Acting Double Acting Single Acting
Type of Operation: A A A A.B Anaerobic adhesive
Flow Adjustment: Available Available Available Available Available
Operating Air
Source:0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa
Min.Shot Volume: 0.01ml 0.01ml 0.01ml 0.01ml 0.01ml
Operation
Viscositi:1-1.000.000cps 1-3.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps
Body Material SUS 304 SUS 304 SUS 304 SUS 304 SUS 304
Input Pressure: <10Kg <10Kg <10Kg <10Kg
Inlet Outlet Size 1/4‘’ 1/4‘’ 1/4‘’ 1/8‘’ 1/8‘’
Operating Cycle <600/min <600/min <600/min <600/min <600/min
Dimensions
(mm)
Round ¢30
long149
Round ¢30
Long 196
Square □75*30
Long 130
Square □32*42
Long 115
Round ¢28
Long 88
Weight 180g 210g 450 g 618g 180g
Applied Material
SMT,Anaerobic,Ins
tant cement
Bad fluidity
Medium-High
Viscosity
Grease,Silicon,Epo
pxy,Oil
Dispensing
volume0.1g-3g,
Solder paste
0.1g-3g
AB mixed
adhesive, Under
3:1 Adjustable
proportion
Anaerobic
adhesive, fast dry
glue, 502 adhesive
Photos
Part No: VCH1919AB VCD1919 VCD2020 VCH2030 VCP3810
Structure Type: Suck Back Needle Off Needle Off Needle Off Needle Off
Control Type : Double Acting Double Acting Manual Manual Spray Valve
Type of Operation: A.B A A A A
Flow Adjustment: Available Available Available Available Available
Operating Air
Source:0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa 0.4-0.7Mpa
Min.Shot Volume: 0.01ml 0.01ml 0.01ml 0.01ml 0.01ml
Operation
Viscositi:1-1.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps 1-1.000.000cps
Body Material SUS 304 SUS 304 AL AL SUS 304
Input Pressure: <10Kg <10Kg <10Kg <10Kg <300Kg
Inlet Outlet Size 1/8'' 1/4'' 6mm 6mm 1/8''
Operating Cycle <600/min <600/min <600/min <600/min <600/min
Dimensions
(mm)
¢19 Width 40
Long 160
¢18 Width 40
Long 150(D)20(L)150 (D)18(L)150
Square □ 24
Long 161
Weight 233 g 243 g 175g 150g 255g
Applied Material
AB mixed
adhesive,Under
2:1 Adjustable
proportion
Directly connect
with pressure tank
Manual control the
dispensing volume
Directly connect
with pressure tank
Manual control the
dispensing volume
Directly connect
with pressure tank
Manual control the
dispensing volume
Bad fluidity
Medium-High
Viscosity
Grease,Silicon,Epo
pxy,Paint
Photos
Pinch Tube Valve 夹管微型点胶阀
Feature 特点:
Specifications 规格:
The Pinch Tube Valve is a compact and cost effective device for dispensing very thin liquids, semi-viscous materials, cyanoacrylates,
anaerobics, solvents, UV cure adhesives and two-component fluids. Make repeat dots, beads or potting. The only part of the valve that makes
contact with the liquid is the low cost replaceable pinch tube assembly. This makes the VC-1212 valve ideal for aggressive or curable liquids
with no risk of the material setting and damaging expensive parts.
夹管阀可以对中,低粘度液体进行连续或者滴状准确点胶。点胶的关闭和启动可由气动自动控制。通过旋钮挤压管路可以提交点胶的流量和
液体的大小,阀的气动时间可以设定。液体只和一次性管路接触。应用液体为油剂,粘合剂,绝氧胶。
• Disposable pinch tubes minimize maintenance •一次性夹管更换方便
• Designed for low viscosity fluids •为低粘度流体设计
• Compact and easy to set up and operate • 体积小重量轻,操作简便
Part No.:
料号:
VC-1212
夹管微型点胶阀
Size
尺寸:83mm L x 40mm Diameter
Weight :
重量:82 g
Wetted Parts
接触液体:
Polyethylene
聚乙烯
Viscosity Range :
粘度范围:1 - 45,000 CPS
Min Shot Size
最小点胶量:0.007 cc/ ml
Flow Rate:
流速:0.54 GPM @ 60 psi (water)
Max Fluid Pressure
最大流体压力:60 psi ( 4 Bar)
Material Inlet
进料口:
Female Luer Lock
阴螺纹
Material Outlet
出料口:
Male Luer Lock
阳螺纹
Mounting
安装尺寸: 1/4" 20UNC-2B
On/Off Pressure
启动压力:50 psi (3.4 Bar) Minimum
Mounting rod
Optional Accessories 可选配件:
No. Part Number Description
1 1212-015MS Production master stand
Material
1212-0070-MF Male/ Female 0.07 (1.78) LDPE Natural
2 1212-014RC Rod clamp
3 1212-013RM
1212-0100-MF Male/ Female 0.100 (2.54) LDPE Natural
Replacement Tube 夹管
Part Number Fitting I.D. INCH(mm)
Item
Capacity
Material
Wall-thickness
(mm)In-diameter
(mm):In-height
(mm)Total Width
(mm)Total Height
(mm)
Pressure(Mpa)
Item
Capacity
Material
Wall-thickness
(mm)In-diameter
(mm):In-height
(mm)Total Width
(mm)Total Height
(mm)
Pressure(Mpa)
Item
Capacity
Material
Wall-thickness
(mm)In-diameter
(mm):In-height
(mm)Total Width
(mm)Total Height
(mm)
Pressure(Mpa)
Item
Capacity
Material
Wall-thickness
(mm)In-diameter
(mm):In-height
(mm)Total Width
(mm)Total Height
(mm)
Pressure(Mpa)
Pressure Tank(SUS304)
VDPT3L(3L 全不锈钢压力桶)
3L
304 Stainless Steel
304 Stainless Steel
2.0-3.0
0-1.0
350
162
2.0-3.0
130
230
180
350
0-1.0
VDPT10L(10L 全不锈钢压力桶)
VDPT5L(5L 全不锈钢压力桶)
5L
250
230
350
0-1.0
VDPT2L(2L 全不锈钢压力桶)
2L
304 Stainless Steel
2.0-3.0
102
250
150
0-1.0
10L
304 Stainless Steel
4.0-5.0
400
150
209
300
VCDMT2 Dispenser Controller
Features :
Specification For the Dispensing Controller:
• With a bright four-digit LED screen.
• Foot Pedal or Finger Switch Controlled
• Designed for wide range of applications
• Digital display of dispense time
• Microprocessor-based control
Size: 195*216*60mm
Details2pc pressure tank
(pressure tank we couls supply
1L/2L/3L/4L/5L/8L/10L/15L/20L/25L/30L/40L/50L/60L/80L/100L/200L)
1pc AB glue valve
1pc dispensing controller/machine
other necessary accessories
Dispense time:0.01 to 31 seconds ±0.1%
Speed:>600/m
Control Mode:Foot Pedal /Finger Switch
Standards:CE approve
Air input:1bar–7bar (1bar =1.01972kg/cm² =14.5038psi)
Air output:0.1bar–7bar
Voltage:110VAC/220VAC
Internal Voltage:24VDC
Consumed Power:< 12W
Working Condition:+5℃~+40℃
Weight:< 3 Kg
Application of material :
Adhesive, glue, cyanoacrylates, silicone, RTV, anaerobic resin, epoxy, UV cure formulations and many more fluids.
VCDMT1 Dispenser Controller
Features :
• With a bright four-digit LED screen.
• Foot Pedal or Finger Switch Controlled
• Designed for wide range of applications
• Digital display of dispense time
• Microprocessor-based control
Specification For the Dispensing Controller:
Size: 195*216*60mm
Details1pc pressure tank
(pressure tank we couls supply
1L/2L/3L/4L/5L/8L/10L/15L/20L/25L/30L/40L/50L/60L/80L/100L/200L)
1pc glue valve
1pc dispensing controller/machine
other necessary accessories
Dispense time:0.01 to 31 seconds ±0.1%
Speed:>600/m
Control Mode:Foot Pedal /Finger Switch
Standards:CE approve
Air input:1bar–7bar (1bar =1.01972kg/cm² =14.5038psi)
Air output:0.1bar–7bar
Voltage:110VAC/220VAC
Internal Voltage:24VDC
Consumed Power:< 15W
Working Condition:+5℃~+40℃
Weight:< 3 Kg
Application of material :
Adhesive, glue, cyanoacrylates, silicone, RTV, anaerobic resin, epoxy, UV cure formulations and many more fluids.
Adapter Barrel Stander Foot Pedal Hand switchPower Cord Air Hose
30CC Syringe Neeldes
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 5 pcs 10 pcs
Specification :
Size:195*216*60mm
Dispense time:0.01 to 31 seconds ±0.1%
VC982G Dispenser Controller
Speed:>600/m
Control Mode:Foot Pedal /Finger Switch
Standards:CE approve
< 8W
Working Condition:+5℃~+40℃
Air input:1bar–7bar (1bar =1.01972kg/cm² =14.5038psi)
Air output:0.1bar–7bar
Voltage:110VAC/220VAC
Accessories :
Features :
• Dispenses all assembly fluids
• Digital timer
• Vacuum control for thin fluids
• 2 Year function Warranty
Application of material :
Adhesive, glue, cyanoacrylates, silicone, RTV, anaerobic resin, epoxy, UV cure formulations and many more fluids.
Weight:< 3 Kg
Internal Voltage:24VDC
Consumed Power:
Adapter Barrel Stander Foot Pedal Hand switch Power Cord Air Hose 30CC Syringe Neeldes
1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 5 pcs 10 pcs
VC986A Dispenser Controller
Features :
Specification :
Size:246*145*65mm
Dispensing time:0.001 to 99.99±0.00005 seconds
• With a bright four-digit LED screen.
• Foot Pedal or Finger Switch Controlled
• Designed for wide range of applications
• Digital display of dispense time
• Microprocessor-based control
Operation Modes: LCD screen +Manual, Timer
Speed:>600/m
Control Mode:Foot Pedal /Finger Switch
Internal Voltage:24VDC
Consumed Power:< 15W
Standards: CE approve
Air input:1bar–7bar (1bar =1.01972kg/cm² =14.5038psi)
Air output:0.1bar–7bar
Working Condition:+5℃~+40℃
Weight:< 3 Kg
Application of material :
Accessories :
Adhesive, glue, cyanoacrylates, silicone, RTV, anaerobic resin, epoxy, UV cure formulations and many more fluids.
Voltage:110VAC/220VAC
Contact Us
Mobile:+86-17706490801
Tel : +86-574-87343957
Skype: vic vmatic
e-Mail: vic@china-vmatic.com
Web: www.china-vmatic.com
LIQUID CONTROL INDUSTRY CO.,LTD
top related