“ All our equipment is manufactured with ENVIRONMENTALLY FRIENDLY PRODUCTS ”

The DBS-6000, is a mechanical seal that offers the versatility to connect the power cable of the pump from the downhole to the surface, quickly and safely, minimizing rig time and total operation cost.

IntroductionIntroduction

Produced by:

Norma API 11S3Norma API 11S3

11S3 NORM

The is fabricated under the Recommended Practice for Electrical Submersible Pump Installations

Produced by:

API 11S3 Norm API 11S3 Norm RecommendationsRecommendations

Transformer Bank

VENTED JUNCTION BOX

(OPTIONAL)SEE 4.3.4 & 4.3.5

Service Disconnected

and Motor Control Panel

ELECTRICAL SEAL FITTING AND VENT

GROUND CONDUCTOR

Electric Assembly

Wellhead

Surface Power Cable

Prodcution String

Casing

Bands

Pumping Assembly

Downhole Pump Cable

Splice

Ground Rod

AmericanPetroleumInstitute

Produced by:

SECURITYSECURITY

ALL PENETRATORS HAVE AN INTERN GROUND WIRE THAT CONNECTS THE

WELLHEAD AND ALL ITS COMPONENTS.

ALL PENETRATORS HAVE CERTIFY SEALS OF SECURITY AND VENTILATION AS A

STANDAR PARAMETER OF MANUFACTURING.

THE SURFACE CONNECTION SYSTEM MAKES THE VENTING BOX IS

OPTIONAL.

Produced by:

The Seal Penetrator System is fabricated under the following standars:

Produced by:

Manufacturing StandarsManufacturing Standars

Explosion Proof NEMA 7 & 9 Class I, Divisions I & II Group D

Junction Box

Complete AssemblyComplete Assembly

Hanger Double Body Seal Penetrator System

6000

Produced by:

The DBS-6000 replaces other models of the market without requiring any modification in the hanger.

Reducer Bushing (Dummy Mandrel)

The figure shows a completation with a “BIW” Penetrator, this can be replaced by the SPS DBS-6000 using a Reducer Bushing (Dummy Mandrel) SPS DBS-6000

SPS JB-20

VersatilityVersatility

BIWPenetrator

Produced by:

The design makes it unique in its style, because the sealed system can be installed outside the hole.

SPS DBS-6000 Outside the well

Produced by:

VersatilityVersatility

The threaded coupling system, is designed so that once adjusted the upper with the lower mandrel, the piston ensures sealing elements on its seat, which gives a stamp of quality to each driver individually. Significantly minimizes the use of tools and equipment installation.

Increases safety and reliability with the implementation of the Guide Pre-seal, used for cable alignment and primary seal.

Complete Installation of equipment is between 30 to 40 minutes.

AdvantagesAdvantages

Produced by:

DBS-6000 on the HangerDBS-6000 on the Hanger

DBS-6000Installed with

Dummy Mandrel

DBS-6000(Open View)

Produced by:

O’ring (Viton)Upper Mandrel

Lower Mandrel

Pre-Seal Guide

Neck Transition

DBS-6000 PartsDBS-6000 Parts

Main SealsPiston

Bearing O 'ring (Viton)

Produced by:

Cables de Potencia

Caja de Empalme

Colgador

Penetrador DBS 6000

Wellhead CompletationWellhead Completation

Produced by:

Installation of ConnectionsInstallation of Connections

Conductor Ground WireProduced by:

SPS Surface Conduit J-Box(Open View)

Splice Connector

SPS Surface Conduit J-Box(Open View)

Installation of ConnectionsInstallation of Connections

Produced by:

Splice BootsProduced by:

SPS Surface Conduit J-Box(Open View)

Installation of ConnectionsInstallation of Connections

Drain and Vent

Surface ConnectionSurface Connection

Produced by:

Commercial InformationCommercial Information

Other Products:

Wellheads and Christmas Trees

Manufacturer

Contact informationContact information

Hector G. AhowPresident

Cra. 31 # 16-258 – MedellínTel.: 57 (4) 583 8764 (57) 315 871 9278

Fax: 57 (4) 583 87 64E-mail:

hector@ahow.com.veWeb Page:

www.ahow.com.ve

Manufacturer & Sales