® 2007 by HERMETIC-Pumpen GmbH 1 C H E M I C A L P E T R O C H E M I C A L R E F R I G E R A T I O N E N E R G Y S E R V I C E C H E M I C A L P E T R.
Post on 18-Dec-2015
225 Views
Preview:
Transcript
® 2007 by HERMETIC-Pumpen GmbH
1
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
® 2007 by HERMETIC-Pumpen GmbH
2
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C O M P L E T E P R O D U C T R A N G E
® 2007 by HERMETIC-Pumpen GmbH
3
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
O U R G U I D I N G T H E M E S A N D V I S I O N S
Responsibility for the environmentBy its absolute tightness to the atmosphere Canned Motor Pumps fulfill the highest requirements in respect to environmental- and
immission protection. The complete production line of HERMETIC-Pumpen GmbH is an essential contribution in observing the EC
directive 96/61/EC, the so-called IPPC directive (Integrated Pollution Prevention and Control) and the Federal Immission Protection
Law and TA-Luft respectively.
Seal-less canned motor pumps, are considered as being the “Best Available Technology” acc. to the IPPC directive and its data
sheets for conveying fluids, which are dangerous and harmful to the environment.
Innovation and experience for your productWe are one of the world’s leading manufacturers of seal-less centrifugal pumps. The products of the company HERMETIC-Pumpen
GmbH stand for best quality and highest operational safety in the chemical and petrochemical industry, as well as in refrigeration
and nuclear industry.
We combine materials of high quality and individual solutions to sophisticated products.
Our products being at the highest safety level feature a great development in partnership with our customers, exceptionally long
service lives of our pumps and low life-cycle costs. Canned motor pumps offer great advantages in the fi eld of operation,
maintenance and performance. Technology at the highest stageOne critical item when using conventional centrifugal pumps is to seal the shaft passages on the pump casing. Besides the high rate
of repairs, this is a reason for the steadily increasing use of seal-less pumps. The praxis shows that seal-less pumps generally have
less repairs than in comparison with conventional chemical pumps with mechanical seal and consequently, they feature a longer
service life.
The refrigeration and cooling industry has also used canned motor pumps for a long time without any problems. Thus, besides the
absolute tightness and high safety of these pumps, they additionally offer both, the advantage of minimized maintenance and high
availability.For your safety – always being one step aheadWe offer a highest level of safety – also with extreme parameters:
- High potential risk originating from the medium to be conveyed
- Fluids to be conveyed at extreme temperatures
- High-pressure circulation
- Explosion protection
HERMETIC – Our name stands for our product line„Nomen est Omen“.
The name HERMETIC relates to „Hermes Trismegistos“ the famous magician of Greek mythology, who could seal treasures and pots,
that means make it „hermetically „ tight.
HERMETIC stands as synonym for absolute tight and leakage free delivery.
® 2007 by HERMETIC-Pumpen GmbH
4
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C O M P L E T E P R O D U C T R A N G E
C A N N E D M O T O R P U M P S
CN HERMETIC pump, single stage
CNF HERMETIC pump, single stage, liquefied gas design
CNK HERMETIC pump, single stage, with external cooler
CNP HERMETIC pump, single stage, process pump built to API 685
CAM HERMETIC pump, single and multistage
CS HERMETIC pump, single and multistage, self-priming
S U B M E R S I B L E P U M P S
TCN HERMETIC pump, single stage, with canned motor
TCAM HERMETIC pump, multistage, with canned motor
MCNV HERMETIC pump, single stage, with magnetic drive
MCAMV HERMETIC pump, multi stage, with magnetic drive
® 2007 by HERMETIC-Pumpen GmbH
5
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P S
MCNn HERMETIC pump, single stage
MCAMn HERMETIC pump, single and multistage
MCNK HERMETIC pump, single stage, with external cooler
MKCN HERMETIC pump, single stage, plastic lined pump
C O N V E N T I O N A L C E N T R I F U G A L P U M P E N
HK HERMETIC pump, single and multistage, closed-coupled design
HKL HERMETIC pump, single and multistage, bearing pedestal mounted
pump
M O N I T O R I N G D E V I C E S
NTS/OTV Level and temperature monitoring device
ARM-2000Axial-Rotation-Monitor
AM-2000 Axial-Monitor
C O M P L E T E P R O D U C T R A N G E
® 2007 by HERMETIC-Pumpen GmbH
6
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
D I S P L A C E M E N T P U M P S
KRL/M/H Rotary lobe pump with single and double mechanical seal, or
Cartrige
LZ Gear pump with single or double mechanical seal
LZM Gear pump with magdrive
HP Internal gear pump with single or double mechanical seal
MHP Internal gear pump with magdrive
V A K U U M P U M P S A N D - S Y S T E M S
LVPS Liquid ring vacuum pump, short size (close coupled)
LVPL Liquid ring vacuum pump, long size (bearing bracket)
LVPG Liquid ring vacuum pump with mechanical seal
LVPM Liquid ring vacuum pump with magdrive
LVPH Liquid ring vacuum pump with canned motor
ALVS Vacuum system
EVAP dry screw vacuum pump
C O M P L E T E P R O D U C T R A N G E
® 2007 by HERMETIC-Pumpen GmbH
7
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N
Single stage
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. -120°C to +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
8
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N F
Single stage, liquified gas design
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. -120°C to +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
9
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N F
Single stage, liquified gas design
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
Flow max. 50 m³/h
Head max. 57 m
Speed 2800 U/min
Operating temp. -50°C to +30°C
Viscosity max. 20 mm²/s
Pressure rating PN 25 / PN 40
® 2007 by HERMETIC-Pumpen GmbH
1
0
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N U N D C N F
Single stage, high temperature
design, without external cooler
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T3
Flow max. 300 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. +100°C to +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
1
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N U N D C N F
Single stage, for liquids with high
melting points with heating jacket
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T3
Flow max. 300 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
2
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N H
Single stage, for high system
pressures
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 180 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. -120°C to +100°C
Viscosity max. 300 mm²/s
Pressure rating max. PN 1200
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
3
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N K
Single stage, with cooler
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
4
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N K
Single stage, with air cooler
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
5
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N K
Single stage, with cooler and
integrated dosing pump
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
6
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N K H
Single stage, with cooler, for high
system pressures
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 180 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +360°C
Viscosity max. 300 mm²/s
Pressure rating max. PN 1200
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
7
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N P
Single stage, single entry
Centerline-mounted, fully comply
with the
API 685 (ISO 15783)
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 200 m
Speed 1450 and 2900
U/min
Operating temp. -120°C to +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 50
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
8
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N P F
Single stage, single entry, liquified
gas design
Centerline-mounted, fully comply
with the
API 685 (ISO 15783)
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 200 m
Speed 1450 and 2900
U/min
Operating temp. -120°C to +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 50
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
1
9
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N P K
Single stage, single entry, with
external cooler
Centerline-mounted, fully comply
with the
API 685 (ISO 15783)
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 200 m
Speed 1450 and 2900
U/min
Operating temp. max. +425°C
Viscosity max. 300 mm²/s
Pressure rating PN 50
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
0
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C N P K
single stage, single entry with air
cooler
Centerline-mounted, fully comply
with the
API 685 (ISO 15783)
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 1200 m³/h
Head max. 200 m
Speed 1450 and 2900
U/min
Operating temp. max. +425°C
Viscosity max. 300 mm²/s
Pressure rating PN 50
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
1
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M
Single- and multistage
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 300 m³/h
Head max. 700 m
Speed 2900 U/min
Operating temp. -120 °C to +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
2
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M
Single- and multistageC H E M I C A L P E T R O C H E M I
C A L E N E R G YR E F R I G E R A T I O N
Flow max. 35 m³/h
Head max. 130 m
Speed 2800 U/min
Operating temp. -50 °C to +30°C
Viscosity max. 20 mm²/s
Pressure rating PN 25 / PN 40
® 2007 by HERMETIC-Pumpen GmbH
2
3
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M R
Single- and multistageC H E M I C A L P E T R O C H E M I
C A L E N E R G YR E F R I G E R A T I O N
Flow max. 12,5 m³/h
Head max. 72 m
Speed 2800 U/min
Operating temp. -50 °C to +30°C
Viscosity max. 20 mm²/s
Pressure rating PN 25 / PN 40
® 2007 by HERMETIC-Pumpen GmbH
2
4
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M
Single- and multistage, high
temperature design, without
external cooler
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T3
Flow max. 120 m³/h
Head max. 300 m
Speed 2900 U/min
Operating temp. max +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
5
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M - T A N D E M
Multistage. tandem design
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 300 m³/h
Head max. 1200 m
Speed 2900 U/min
Operating temp. -120°C to +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
6
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M K
Single- and multistage, with cooler
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 300 m³/h
Head max. 700 m
Speed 2900 U/min
Operating temp. max. +360°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
7
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M H
Multistage, for high system
pressures,
barrel pump
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 300 m³/h
Head max. 700 m
Speed 2900 U/min
Operating temp. -120 °C to +100°C
Viscosity max. 300 mm²/s
Pressure rating to PN 500
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
8
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C A M H
Multistage, for high system
pressures,
tandem design
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 300 m³/h
Head max. 700 m
Speed 2900 U/min
Operating temp. max. +100°C
Viscosity max. 300 mm²/s
Pressure rating max. PN 500
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
2
9
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C S 3 2
Multistage, self-priming
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 20 m³/h
Head max. 110 m
Speed 1450 U/min
Operating temp. -40°C to +240°C
Viscosity max. 75 mm²/s
Pressure rating PN 16 to PN 40
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
0
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P C S
Single stage, self-priming
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 100 m³/h
Head max. 85 m
Speed 2900 U/min
Operating temp. -30°C to +90°C
Viscosity max. 75 mm²/s
Pressure rating PN 10
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
1
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P T C N
Single stage, submersible pump,
vertical and horizontal design
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 200 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +100°C
Viscosity max. 300 mm²/s
Pressure rating PN 10 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
2
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C A N N E D M O T O R P U M P T C A M
Single- and multistage,
submersible pump, vertical and
horizontal design
Explosion protection as per EC-
type examination certificate
according to directives 94/9/EG
II 2 G EEx dec II C T1 to T6
Flow max. 300 m³/h
Head max. 700 m
Speed 1450 and 2900
U/min
Operating temp. max. +100°C
Viscosity max. 300 mm²/s
Pressure rating max. PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
3
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P M C N n
Single stage
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Flow max. 450 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +220°C
Viscosity max. 100 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
4
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P M C N n - B L O C K
Single stage, closed coupled
design
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Flow max. 220 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +140°C
Viscosity max. 100 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
5
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P M C A M n
Single- and multistage
Flow max. 45 m³/h
Head max. 200 m
Speed 2900 U/min
Operating temp. max. +220°C
Viscosity max. 100 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
6
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P M C A M n - B L O C K
Single- and multistage, closed
coupled design
Flow max. 45 m³/h
Head max. 200 m
Speed 2900 U/min
Operating temp. max. +140°C
Viscosity max. 100 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
7
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P M C N K
Singl stage, with external cooling
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Flow max. 450 m³/h
Head max. 150 m
Speed 1450 and 2900
U/min
Operating temp. max. +360°C
Viscosity max. 100 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
8
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M A G D R I V E P U M P M K C N n
Single stage, plastic lined pump
Dimensions and performance
curves in accordance to EN 22858;
ISO 2858
Flow max. 50 m³/h
Head max. 57 m
Speed 1450 and 2900
U/min
Operating temp. max. +150°C
Viscosity max. 30 mm²/s
Pressure rating PN 16
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
3
9
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C O N V E N T I O N A L C E N T R I F U G A L P U M P E N H K
Single- and multistage in closed
coupled design, with packing
gland or mechanical seal
Flow max. 140 m³/h
Head max. 200 m
Speed 2900 U/min
Operating temp. max. +350°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
4
0
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
C O N V E N T I O N A L C E N T R I F U G A L P U M P E N H K L
Single- and multistage, bearing
pedestal mounted pump, with
packing gland or mechanical seal
Flow max. 140 m³/h
Head max. 200 m
Speed 2900 U/min
Operating temp. max. +350°C
Viscosity max. 300 mm²/s
Pressure rating PN 16 and PN 25
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
4
1
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
Balancing of the axial thrust is an
important factor of the final testing.
Improper axial thrust balancing is the
primary pump failure.
Axial thrust balance is influenced by
the plant itself or by pumped liquid.
For early failure detection, rotor
position monitoring is recommended.
By separate monitoring of the
bearing clearance and the direction
of rotation, several models of pump
failure can be detected.For example: ARM-2000 AM-2000
Axial bearing wear Cavitation deposits and clocking wrong direction of rotation –flow reduction threatened damage of the can
reduced motor cooling flow
M O N I T O R I N G D E V I C E S A R M - 2 0 0 0 a n d A M - 2 0 0 0
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
4
2
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E T 30.x
N 30.x
ARM-2000
M O N I T O R I N G D E V I C E S A R M - 2 0 0 0 a n d N T S
® 2007 by HERMETIC-Pumpen GmbH
4
3
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M O N I T O R I N G D E V I C E S N T S
Level sensor N30Thermostat T30
Switching amplifier S30
113
40
73
76 246170
28
Ø12
gasket
thread R 1/2“
PG 13,5
76
1122,5 1,8 18
80
18
210
N 30.2 to 370°
110
Ø21,3
DN15
N 30.1 to 100°
275
PG 16
Ø130
DN15
105
Moveable reed contact insert forfunctional checking
® 2007 by HERMETIC-Pumpen GmbH
4
4
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E T 30.xO 30.x
ARM-2000
M O N I T O R I N G D E V I C E S A R M - 2 0 0 0 a n d O T V
® 2007 by HERMETIC-Pumpen GmbH
4
5
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
M O N I T O R I N G D E V I C E S O T V
Level sensor O30Thermostat T30
113
40
73
76 246170
28
Ø12
gasket
thread R 1/2“
PG 13,5
76
120
200Insert card 19“
Ø45
EL = insert lengthSwitching amplifier V30
Connection box (Macrolon casing)
75
89
thread R 1/2“Ø18
EL 24EL +4
ELmax = 960 mm
® 2007 by HERMETIC-Pumpen GmbH
4
6
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
R O T A R Y L O B E P U M P K R H / K R M
Rotary lobe pump for process
applications
Suitable for low lubricating,
viscous, corrosive and toxic fluids
Shaft sealing by double
mechanical seal
II 2 G EEx II c T1 to T6
Flow max. 300 m³/h
Differential pressure max.
30 bar
Speed max. 700 U/min
Operating temp. -50°C to +250°C
Viscosity max. 1000.000
mm²/s
Pressure rating PN 25 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
4
7
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
G E A R P U M P L Z
Gear pumps for process
applications
Suitable for low lubricating,
viscous, corrosive and toxic fluids
Single or double mechanical seal
II 2 G EEx II c T1 to T6
Flow max. 100 m³/h
Differential pressure max.
100 bar
Speed max. 1450 U/min
Operating temp. -50°C to +250°C
Viscosity max. 1000.000
mm²/s
Pressure rating PN 25 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
4
8
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
G E A R P U M P L Z M
Gear pumps for process
applications
Suitable for low lubricating,
viscous, corrosive and toxic fluids
Magdrive
II 2 G EEx II c T1 to T6
Flow max. 100 m³/h
Differential pressure max.
100 bar
Speed max. 1450 U/min
Operating temp. -50°C to +250°C
Viscosity max. 10.000
mm²/s
Pressure rating PN 25 to PN 100
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
4
9
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
I N T E R N A L G E A R P U M P H P
Internal gear pump for process
applications
Suitable for low lubricating,
viscous, corrosive and toxic fluids
Single or double mechanical seal
II 2 G EEx II c T1 to T6
Flow max.60 m³/h
Differential pressure max.
12 bar
Speed max. 900 U/min
Operating temp. -50°C to +150°C
Viscosity max. 1000.000
mm²/s
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
5
0
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
I N T E R N A L G E A R P U M P H P / M H P
Internal gear pump for process
applications
Suitable for low lubricating,
viscous, corrosive and toxic fluids
Magdrive
II 2 G EEx II c T1 to T6
Flow max.60 m³/h
Differential pressure max.
12 bar
Speed max. 900 U/min
Operating temp. -50°C to +150°C
Viscosity max. 10.000 mm²/s
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
5
1
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
V A K U U M P U M P E L V P
Liquid ring vacuum pumps for
process applications
According to API 681
Casing for high tightness
requirements
Single or double mechanical seal
Available in special materials e.g.
Hastelloy, titanium
II 2 G EEx II c T1 to T6
Flow max.2000 m³/h
Differential pressure max.
2 bar
Speed max. 3000 U/min
Operating temp. -50°C to +150°C
Pressure rating PN 10
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
5
2
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
V A K U U M P U M P E L V P M / L V P H
Liquid ring vacuum pumps for
process applications
According to API 681
Casing for high tightness
requirements
Magdrive or canned motor
Available in special materials e.g.
Hastelloy, titanium
II 2 G EEx II c T1 to T6
Flow max.2000 m³/h
Differential pressure max.
2 bar
Speed max. 3000 U/min
Operating temp. -50°C to +150°C
Pressure rating PN 10
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
5
3
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
V A C U U M S Y S T E M A L V S
Our liquid ring vacuum systems
are custom-made according to
your process requirements.
Combinations with steam ejectors,
roots blower pumps, in several
stages are executable one behind
the other.
The plants can be supplied
completely equipped with
measuring and automatic control.
The plants are adapted in material
and execution to the respective
process conditions
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
® 2007 by HERMETIC-Pumpen GmbH
5
4
C H E M I C A L
P E T R O C H E M I C A L
R E F R I G E R A T I O N
E N E R G Y
S E R V I C E
D R Y S C R E W V A C U U M P U M P E V A P
Single stage, dry running, non-
contact screw type vacuum pump.
The screw rotor construction with
directly water-cooled screws is
patented.
Therefore the pump is particularly
suitable for applications in
chemistry, pharmacy and polymer
production.
II 2 G c T3 to T4
Flow max. 840 m³/h
Differential pressure max.
1300 mbar
Speed max. 3500 U/min
Operating temp. to +100°C
Pressure rating PN 10
C H E M I C A L P E T R O C H E M I C A L E N E R G YR E F R I G E R A T
I O N
top related