DOCUMENT RESOURCES FOR EVERYONE
Documents tagged
Documents SMT AND THROUGH HOLE DFM GUIDELINES

SMT AND PTH DESIGN FOR MANUFACTURABILITY GUIDELINES BY KANTESH DOSS __________________________________________________________________________ Page 1 OF __________________________________________________________________________…

Documents Board Design Guidelines 2003 Rev-A

Board Design Guidelines TABLE OF CONTENTS Page SECTION 1: INTRODUCTION 1.1 Policy 1.2 Purpose 1.3 Scope SECTION 2: GENERAL DESIGN STANDARDS 2.1 Circuit Layers 2.2 Silkscreen…

Documents GTA04A4-4 System Manual Complete

Openmoko Phoenux (GTA04) "Upgrade board for the Openmoko Smartphones" System Manual For updates, errata and more information, please refer to www.gta04.org Copyright:…

Documents Clinitek 50 POCT. Learning Objectives Essential criteria for assessment: Present for training...

Slide 1Clinitek 50 POCT Slide 2 Learning Objectives Essential criteria for assessment: Present for training session Practical Assessment – 1 supervised test Show knowledge…

Documents Results of the ASIC Test New Developments Next Steps Project Meeting.

Slide 1Results of the ASIC Test New Developments Next Steps Project Meeting Slide 2 DESY FEC | Project Meeting at MPI/HLL | 1.07.2014 | Page 2 Results of the ASIC Test Delivery…

Documents Design for Testing

Design For Testing (DFT) M.Venugopal Reddy, IIISem - ME(CIM) What is Testability? Testability can best be described as the ease with which the functionality of any electronic…