it is guided by wikipedia and some books

 Milling cutters are cutting tools typically used in milling machines or machining centres (and occasionally in other machine tools). They remove material by their movement…

E .. .-..- ORNL/TM=8100 Design and Analysis of a 5-MW 7 Vertical-Fluted-Tube Condenser for Geothermal Applications G. H. Llewellyn , -.. 4 ' * DISCLAIMER This report…

VOLTAGE COLLASPE IN POWER SYSTEM AND DESIGN METHOD TO ELIMINATE VOLTAGE COLLAPSE BY SIMULATION PROCESS By Abu Hena MD Shatil 0402106 Aminul Haque 0402050 Supervisor Prof.…

Matthias David Huser Dogs, UK, 30'00 A car dealer who believes he is a cowboy. A man in a suit who has been looking for his dog for years. Two illusions and one band.…

SPE 18892 Asphaltene Deposition: A Comprehensive Description of Problem Manifestations and Modeling Approaches by K.J. Leontaritis,q U. of Illinois SPE Member “Now with…

I. The humanistic tradition 1.1 Behaviorism (Skinner and Krashen) Behaviorism (or behaviourism), also called the learning perspective (where any physical action is a behavior),…

INPLANE RESPONSE OF WIDE SPACED REINFORCED MASONRY SHEAR WALLS By Waheed Haider B.Sc Eng, M.Eng, M.I.E.Aust. A Thesis Submitted in Partial Fulfilment of the Requirements…

PROJECT REPORT On DEPOSITION OF THIN FILM BY THERMAL EVAPORATION & DESIGN OF GAS SENSOR ALARM Undertaken at DRDO, JODHPUR CONTENTS 1. INTRODUCTION 1.1 1.2 1.3 Gas Sensor…

Short Course on Electronic Project Design and Fabrication Lecture 1: Resistor Capacitor, Induction, Transformer, Diode, Relay, Project Board, Multimeter Diode, Editor: MD.…