YOU ARE DOWNLOADING DOCUMENT

Please tick the box to continue:

Transcript
Page 1: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

RESL CUSTOMER EXPORT CONTROL AGREEMENT It is the Radiological and Environmental Sciences Laboratory’s (RESL) policy to conduct business in accordance with all applicable U.S. export control laws and regulations. It is also RESL’s policy that its Customers comply with U.S. export control laws and regulations. Therefore, Customer agrees to the following: 1. Because products, technical data, and technical assistance (i.e., services) provided to

Customer by RESL may be subject to U.S. export control laws and regulations, (i) transactions with certain persons and companies and (ii) the export or reexport of certain types and levels of products, technical data, and services are prohibited or restricted.

2. Customer acknowledges that it is responsible for its own compliance with U.S. export control laws and regulations. Customer further agrees that it assumes the responsibility to obtain all necessary U.S. export licenses or other U.S. governmental authorizations, as well as all liability for the failure to do so.

3. Customer acknowledges that export control requirements may change and that the export or

reexport of RESL products, technical data, and services without an export license or other appropriate governmental authorization may result in criminal and/or civil liability.

4. The obligations and requirements described herein shall survive the expiration or termination

of any agreement or contract between RESL and Customer.

Page 2: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

GrF34 Participating LaboratoriesLab Code Lab Name Matrix CodeADEM01 Alabama Department of Environmental Management GrFADFC99 Abu Dhabi Quality and Conformity Council-Central Testing Lab GrFAFOH01 USAFSAM/OEA GrFANTE01 ALS Environmental - Fort Collins, CO GrFARGO01 Idaho National Laboratory GrFARPL01 Analytical Support Operations - Radiochemical Processing Lab GrFARSL01 ARS International, LLC GrFASUK99 NAS Radiochemistry Group GrFAY1201 Consolidated Nuclear Security, LLC, Analytical Chemistry Organization Lab GrFBY1201 Consolidated Nuclear Security, LLC, Analytical Chemistry Organization Lab GrFCESL01 Lawrence Livermore National Laboratory - EMRL GrFCHMH01 222-S Laboratory GrFCRCE99 Centre for Radiation, Chemical and Environmental Hazards GrFDEHS01 Department of Environmental Health & Safety GrFDPHE01 Colorado Dept. of Public Health & Env. / Laboratory Services Div. GrFDRMG01 CNS Pantex - D&RMG GrFELIW01 Energy Laboratories, Inc. GrFERCL01 Washington State Public Health Laboratories GrFEULC01 EnergySolutions, LLC GrFFDHE01 Florida Dept of Health Environmental Laboratory GrFFDOH01 Florida Dept. of Health, Mobile Environmental Radiological Lab GrFGENE01 GEL Laboratories, LLC GrFGPCL01 Georgia Power Company Environmental Laboratory GrFHCAL01 Lawrence Livermore National Laboratory GrFHECR01 SC Dept. Health and Environmental Control Radiological Laboratory GrFHERR01 Washington Closure Hanford GrFHPAL01 Los Alamos National Laboratory GrFISUP01 ISU - Department of Physics/Health Physics/EAL GrFJAEC99 Research Laboratories and Information Directorate GrFLAEC99 Lebanese Atomic Energy Commission - Environmental Radiation GrFLERL99 LARUEX Environmental Radioactivity Laboratory GrFLGCL99 LGC Ltd GrFLOCK03 Advanced Test Reactor (ATR) Complex Radioanalytical Laboratory GrFMAHP59 Materials Assessment and Health Physics Group GrFMALA99 Asia Lab (M) Sdn. Bhd. GrFMART03 Radioactive Material Analysis Laboratory GrFMDPH01 MDPH-Radiation Control Program GrFNARL01 National Analytical Radiation Environmental Laboratory GrFNESI01 B&W Technical Services-Radioisotope & Analytical Chemistry Laboratory GrFNOCS99 National Oceanography Centre, Southampton GrFNRLL99 Environmental Radioactivity - National Centre for Radiation Science GrFODHL01 Ohio Department of Health Laboratory GrFORIS01 ORISE/IEAV GrFOTLI01 Outreach Laboratory, a Division of ESC Lab Sciences GrFQUAN01 TestAmerica St. Louis GrF

Page 3: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

QUAN03 TestAmerica Laboratories - Richland GrFRAVR99 Radiactividad Ambiental y Vigilancia Radiologica GrFRPSC01 Radiation Protection Service GrFRSAL01 RSA Laboratories, Inc. GrFSANC99 RadioAnalysis, South Africa Nuclear Energy Corp. GrFSEML01 SRS Environmental Monitoring Laboratory GrFSOUT01 Southwest Research Institute GrFSRPD01 Sandia National Laboratories, Radiation Protection Sample Diagnostics GrFTDHL01 Texas Department of State Health Services Laboratory GrFTELE01 TELEDYNE BROWN ENGINEERING - ENVIRONMENTAL SERVICES GrFTELE02 ATI Environmental, Inc., Midwest Lab GrFTMAO01 EBERLINE SERVICES OAK RIDGE LABORATORY GrFTNUT01 St. Louis USACE FUSRAP Laboratory GrFURSL01 UNLV Radioanalytical Services Laboratory GrFWEST04 PACE ANALYTICAL SERVICES, PITTSBURGH GrFWIPP01 WIPP Laboratories GrFWSHL01 Wisconsin State Laboratory of Hygiene GrFWSTP99 Cavendish Nuclear Limited GrFWVDP01 WVDP Environmental Laboratory GrFWVPL01 WVDP Radiation Protection Lab GrF

Page 4: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

Laboratories Not Reporting GrF34Lab Code Lab Name Matrix CodeENEC99 Emirates Nuclear Energy Corp (ENEC) Environmental Radiochemistry Lab GrFKSCF01 Kennedy Space Center, HP Laboratory GrFNARL02 USEPA - NAREL - MERL GrFZIOS99 ZVD Institute of Occupational Safety GrF

Page 5: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

Study Reference ValuesMAPEP-16-GrF34 Radiological Reference Date: 02/01/2016

Analyte RefValue

RefUnc

Radiological Units:(Bq/sample)

Gross alpha 1.20 0.03Gross beta 0.79 0.03

Printed 7/07/2016

Page 6: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

Sample Statistical SummaryMAPEP-16-GrF34 Radiological Reference Date: 02/01/2016

Analyte T(1) A(2) Grand(3)Mean

StdDev

RefValue

RefUnc

AcceptanceRange

Radiological Units: (Bq/sample)Gross alpha 64 55 0.92 0.31 1.20 0.03 0.36 - 2.04 Gross beta 65 63 0.81 0.09 0.79 0.03 0.40 - 1.19

Note: (1) T = Total number of laboratories reporting analyte.(2) A = Number of laboratories with 'Acceptable' performance.(3) Mean excludes values derived as total metals and values indicated as "Not Acceptable".

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations(Result/Uncertainty > 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, does not include zero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standarddeviations (Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty attwo standard deviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations(Result/Uncertainty > 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, does not include zero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standarddeviations (Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty attwo standard deviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016

Page 7: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

Flag Summary ReportMAPEP-16-GrF34

Radiological

Analyte A W RW NGross alpha 55 9Gross beta 63 2

Printed 6/27/2016

Page 8: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ADEM01) Alabama Department of Environmental ManagementMontgomery LaboratoryMontgomery, AL 36110

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.01A -0.50Gross alpha -58.31.20 0.36 2.04 A0.03A -0.88Gross beta 11.40.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 9: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ADFC99) Abu Dhabi Quality and Conformity Council-Central Testing LabRadiation LabAbu Dhabi, - -

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.14A -1.13Gross alpha -5.81.20 0.36 2.04 A0.02A -0.72Gross beta -8.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 10: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(AFOH01) USAFSAM/OEA2510 Fifth Street, Area BWright-Patterson AFB, OH 45433-7913

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.1A -1.0Gross alpha -16.71.20 0.36 2.04 A0.07A -0.95Gross beta 20.30.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 11: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ANTE01) ALS Environmental - Fort Collins, CO225 Commerce DriveFort Collins, CO 80524-1416

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.080A -0.988Gross alpha -17.71.20 0.36 2.04 A0.050A -0.619Gross beta -21.60.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 12: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ARGO01) Idaho National LaboratoryINL, Materials and Fuels ComplexIdaho Falls, ID 83415

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.12A -1.28Gross alpha 6.71.20 0.36 2.04 A0.07A -0.76Gross beta -3.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 13: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ARPL01) Analytical Support Operations - Radiochemical Processing LabPO Box 999Richland, WA 99354

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.022N -0.357Gross alpha -70.31.20 0.36 2.04 A0.025A -0.756Gross beta -4.30.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 14: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ARSL01) ARS International, LLC2609 North River RoadPort Allen, LA 70767

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.062A -.493Gross alpha -58.91.20 0.36 2.04 A

.100A -.807Gross beta 2.20.79 0.40 1.19 ARadiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 15: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ASUK99) NAS Radiochemistry GroupA38.1 AWE,Reading, Berkshire RG7 4PR

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.041A -1.291Gross alpha 7.61.20 0.36 2.04 A0.016A -0.955Gross beta 20.90.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 16: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(AY1201) Consolidated Nuclear Security, LLC, Analytical Chemistry Organization LaboratoryY12, NSC, Bldg. 9995, Rm 142Oak Ridge, TN 37831-8189

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.094A -1.16Gross alpha -3.31.20 0.36 2.04 A0.076A -0.820Gross beta 3.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 17: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(BY1201) Consolidated Nuclear Security, LLC, Analytical Chemistry Organization LaboratoryY12, NSC, Bldg. 9995, Rm 142Oak Ridge, TN 37831-8189

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.102A -1.36Gross alpha 13.31.20 0.36 2.04 A0.072A -0.873Gross beta 10.50.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 18: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(CESL01) Lawrence Livermore National Laboratory - EMRL7000 East AvenueLivermore, CA 94551

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

3.17E-03N -3.39E-01Gross alpha -71.81.20 0.36 2.04 N4.45E-03A -9.65E-01Gross beta 22.20.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 19: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(CHMH01) 222-S Laboratory1955 Jadwin Ave Suite 330Richland, WA 99354

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

12.0A -5.68E-01Gross alpha -52.71.20 0.36 2.04 N6.57A -7.78E-01Gross beta -1.50.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 20: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(CRCE99) Centre for Radiation, Chemical and Environmental HazardsPublic Health EnglandDidcot, OXON OX11 0RQ

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.06A -1.20Gross alpha 0.01.20 0.36 2.04 A0.05A -0.89Gross beta 12.70.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 21: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(DEHS01) Department of Environmental Health & SafetyNorth Carolina State Univ.Raleigh, NC 27695-8007

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.06A -1.13Gross alpha -5.81.20 0.36 2.04 A0.03A -0.83Gross beta 5.10.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 22: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(DPHE01) Colorado Dept. of Public Health & Env. / Laboratory Services Div.8100 Lowry BlvdDenver, CO 80230

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.04A -0.60Gross alpha -50.01.20 0.36 2.04 A0.03A -0.78Gross beta -1.30.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 23: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(DRMG01) CNS Pantex - D&RMGBldg 12-122Amarillo, TX 79120-0020

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

5.61E-02A -1.07E+00Gross alpha -10.81.20 0.36 2.04 A2.31E-02A -8.47E-01Gross beta 7.20.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 24: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ELIW01) Energy Laboratories, Inc.2393 Salt Creek HWYCasper, Wy 82601

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.23A -1.1Gross alpha -8.31.20 0.36 2.04 W0.098A -0.68Gross beta -13.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 25: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ERCL01) Washington State Public Health Laboratories1610 N.E. 150th StreetShoreline, WA 98155-9701

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.027N -0.307Gross alpha -74.41.20 0.36 2.04 A0.022A -0.773Gross beta -2.20.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 26: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(EULC01) EnergySolutions, LLCI-80, Exit 49Clive, UT 84029

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.12A -.4425Gross alpha -63.11.20 0.36 2.04 W

.21A -.8778Gross beta 11.10.79 0.40 1.19 WRadiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 27: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(FDHE01) Florida Dept of Health Environmental LaboratoryPO Box 680069Orlando, FL 32868-0069

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.13A -1.55Gross alpha 29.21.20 0.36 2.04 A0.04A -0.90Gross beta 13.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 28: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(FDOH01) Florida Dept. of Health, Mobile Environmental Radiological LabPO Box 680069Orlando, FL 32868-0069

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.10A -1.22Gross alpha 1.71.20 0.36 2.04 A

.04A -0.83Gross beta 5.10.79 0.40 1.19 ARadiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 29: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(GENE01) GEL Laboratories, LLC2040 Savage RoadCharleston, SC 29407

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0960A -1.41Gross alpha 17.51.20 0.36 2.04 A0.0520A -0.897Gross beta 13.50.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 30: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(GPCL01) Georgia Power Company Environmental Laboratory2480 Maner RoadAtlanta, GA 30339

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

3.13E-07N -0.1970Gross alpha -83.61.20 0.36 2.04 N1.30E-07A -0.8158Gross beta 3.30.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 31: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(HCAL01) Lawrence Livermore National LaboratoryAnalytical Services and Instrumentation Analytical LabLivermore, CA 94550

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0574N -0.310Gross alpha -74.21.20 0.36 2.04 W0.0749A -0.856Gross beta 8.40.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 32: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(HECR01) SC Dept. Health and Environmental Control Radiological Laboratory8231 Parklane RoadColumbia, SC 29223

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0451N -0.306Gross alpha -74.51.20 0.36 2.04 A0.0523A -0.762Gross beta -3.50.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 33: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(HERR01) Washington Closure HanfordRadiological Counting FacilityRichland, WA 99352

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.03N -0.16Gross alpha -86.71.20 0.36 2.04 W.17N -6.7Gross beta 748.10.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 34: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(HPAL01) Los Alamos National LaboratoryMilan Gadd, MS G761Los Alamos, NM 87545-1663

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.05A -1.10Gross alpha -8.31.20 0.36 2.04 A0.02A -0.82Gross beta 3.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 35: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ISUP01) ISU - Department of Physics/Health Physics/EAL785 S. 8th Ave, Rm 120Pocatello, ID 83209-8106

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.025A -0.716Gross alpha -40.31.20 0.36 2.04 A0.014A -0.665Gross beta -15.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 36: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(JAEC99) Research Laboratories and Information DirectorateJordan Atomic Energy CommissionAmman, Jordan 70 (11934)

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.191A -0.824Gross alpha -31.31.20 0.36 2.04 W0.087N -1.667Gross beta 111.00.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 37: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(LAEC99) Lebanese Atomic Energy Commission - Environmental RadiationNational Council for Scientific ResearchBeirut, Beirut 1107 2260

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.02N -0.28Gross alpha -76.71.20 0.36 2.04 A0.01A -0.73Gross beta -7.60.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 38: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(LERL99) LARUEX Environmental Radioactivity LaboratoryDpt. Applied Physics, Faculty of Vet. SciencesCaceres, Caceres 10003

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.076A -0.440Gross alpha -63.31.20 0.36 2.04 W0.044A -0.638Gross beta -19.20.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 39: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(LGCL99) LGC LtdQueens RoadTeddington, Middlesex TW11 0LY

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.16A -1.154Gross alpha -3.81.20 0.36 2.04 A0.06A -0.78Gross beta -1.30.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 40: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(LOCK03) Advanced Test Reactor (ATR) Complex Radioanalytical LaboratoryINL/Battelle Energy Alliance, LLCIdaho Falls, ID 83415-7111

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.05A -0.45Gross alpha -62.51.20 0.36 2.04 A0.06A -0.90Gross beta 13.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 41: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(MAHP59) Materials Assessment and Health Physics GroupImperial College Reactor CentreAscot, Berkshire SL5 7TE

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.09A -1.17Gross alpha -2.51.20 0.36 2.04 A0.10A -0.85Gross beta 7.60.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 42: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(MALA99) Asia Lab (M) Sdn. Bhd.No. 14, JLN USJ 1/1Subang Jaya, Selangor 47600

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.06A -0.909Gross alpha -24.31.20 0.36 2.04 A0.03A -0.867Gross beta 9.70.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 43: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(MART03) Radioactive Material Analysis LaboratoryORNLOak Ridge, TN 37830

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.073A -1.13Gross alpha -5.81.20 0.36 2.04 A0.04A -0.90Gross beta 13.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 44: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(MDPH01) MDPH-Radiation Control ProgramMERL-Room 002Jamaica Plain, MA 02130-3597

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.06A -0.96Gross alpha -20.01.20 0.36 2.04 A0.02A -0.85Gross beta 7.60.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 45: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(NARL01) National Analytical Radiation Environmental Laboratory540 S. Morris Ave.Montgomery, AL 36115-2601

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0347N -0.300Gross alpha -75.01.20 0.36 2.04 A0.0420A -0.739Gross beta -6.50.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 46: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(NESI01) B&W Technical Services-Radioisotope & Analytical Chemistry LaboratoryLynchburg Technology CenterLynchburg, VA 24504-5447

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.024A -0.862Gross alpha -28.21.20 0.36 2.04 A0.016A -0.843Gross beta 6.70.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 47: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(NOCS99) National Oceanography Centre, SouthamptonGAU-RadioanalyticalSouthampton, Hampshire SO14 3ZH

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.2A -0.58Gross alpha -51.71.20 0.36 2.04 N0.02A -0.98Gross beta 24.10.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 48: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(NRLL99) Environmental Radioactivity - National Centre for Radiation SciencePO Box 29181Christchurch, Christchurch 8540

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.11A -1.12Gross alpha -6.71.20 0.36 2.04 A0.056A -0.714Gross beta -9.60.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 49: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ODHL01) Ohio Department of Health Laboratory8995 E Main StreetReynoldsburg, OH 43068

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.045A -0.901Gross alpha -24.91.20 0.36 2.04 A0.015A -0.809Gross beta 2.40.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 50: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(ORIS01) ORISE/IEAVPO Box 117Oak Ridge, TN 37831-0117

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.021A -0.679Gross alpha -43.41.20 0.36 2.04 A0.018A -0.794Gross beta 0.50.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 51: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(OTLI01) Outreach Laboratory, a Division of ESC Lab Sciences311 N. AspenBroken Arrow, OK 74012-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.017A -0.511Gross alpha -57.41.20 0.36 2.04 A0.019A -0.908Gross beta 14.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 52: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(QUAN01) TestAmerica St. Louis13715 Rider Trail NorthEarth City, MO 63045-1205

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0637A -0.900Gross alpha -25.01.20 0.36 2.04 A0.0416A -0.734Gross beta -7.10.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 53: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(QUAN03) TestAmerica Laboratories - Richland2800 GEORGE WASHINGTON WAYRICHLAND, WA 99354-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.122A -.951Gross alpha -20.81.20 0.36 2.04 A.0451A -.688Gross beta -12.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 54: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(RAVR99) Radiactividad Ambiental y Vigilancia RadiologicaCIEMAT (Ed 70 P2 D11)Madrid, Madrid 28040

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.08A -0.83Gross alpha -30.81.20 0.36 2.04 A0.07A -0.75Gross beta -5.10.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 55: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(RPSC01) Radiation Protection ServiceOntario Ministry of LabourWeston, Ontario M9P 3T1

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

-NRGross alpha 1.20 0.36 2.040.10A -0.95Gross beta 20.30.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 56: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(RSAL01) RSA Laboratories, Inc.19 Pendleton DriveHebron, CT 06248

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.063A -0.53Gross alpha -55.81.20 0.36 2.04 A

.059A -0.76Gross beta -3.80.79 0.40 1.19 ARadiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 57: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(SANC99) RadioAnalysis, South Africa Nuclear Energy Corp.Sample Receipt Gate 1Pretoria, Gauteng 0001

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.032A -0.380Gross alpha -68.31.20 0.36 2.04 A0.038A -0.793Gross beta 0.40.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 58: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(SEML01) SRS Environmental Monitoring LaboratoryBldg 735-BAiken, SC 29808

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.11A -0.797Gross alpha -33.61.20 0.36 2.04 A0.094A -0.840Gross beta 6.30.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 59: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(SOUT01) Southwest Research Institute6220 Culebra Rd.San Antonio, TX 78228-0510

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0504A -0.681Gross alpha -43.31.20 0.36 2.04 A0.0448A -0.689Gross beta -12.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 60: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(SRPD01) Sandia National Laboratories, Radiation Protection Sample DiagnosticsPO Box 5800, MS1103Albuquerque, NM 87185-1103

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.017A -1.229Gross alpha 2.41.20 0.36 2.04 N0.032A -0.729Gross beta -7.70.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 61: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(TDHL01) Texas Department of State Health Services Laboratory1100 W 49th StreetAustin, TX 78756

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.024A -0.753Gross alpha -37.31.20 0.36 2.04 A0.019A -0.833Gross beta 5.40.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 62: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(TELE01) TELEDYNE BROWN ENGINEERING - ENVIRONMENTAL SERVICES2508 Quality LaneKnoxville, TN 37931-6819

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.043A -0.608Gross alpha -49.31.20 0.36 2.04 A0.056A -0.806Gross beta 2.00.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 63: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(TELE02) ATI Environmental, Inc., Midwest Lab700 Landwehr RoadNorthbrook, IL 60062-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.051A -0.390Gross alpha -67.51.20 0.36 2.04 A0.069A -1.027Gross beta 30.00.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 64: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(TMAO01) EBERLINE SERVICES OAK RIDGE LABORATORY601 SCARBORO RDOAK RIDGE, TN 37830-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.065A -0.900Gross alpha -25.01.20 0.36 2.04 A0.033A -0.847Gross beta 7.20.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 65: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(TNUT01) St. Louis USACE FUSRAP Laboratory8945 LATTY AVEBERKELEY, MO 63134-

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.0463A -1.4641Gross alpha 22.01.20 0.36 2.04 A

.0347A -.8641Gross beta 9.40.79 0.40 1.19 ARadiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 66: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(URSL01) UNLV Radioanalytical Services LaboratoryCampus Mail Stop 453037Las Vegas, NV 89154-3037

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.06A -1.17Gross alpha -2.51.20 0.36 2.04 A0.04A -0.76Gross beta -3.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 67: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(WEST04) PACE ANALYTICAL SERVICES, PITTSBURGH1638 Roseytown RoadGreensburg, PA 15601

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.131A -0.722Gross alpha -39.81.20 0.36 2.04 W0.121A -0.670Gross beta -15.20.79 0.40 1.19 W

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 68: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(WIPP01) WIPP Laboratories1400 University DriveCarlsbad, NM 88220

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

7.79e-02A -1.01e+00Gross alpha -15.81.20 0.36 2.04 A3.02e-02A -6.89e-01Gross beta -12.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 69: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(WSHL01) Wisconsin State Laboratory of Hygiene2601 Agriculture DriveMadison, WI 53718

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

.0575A -.6860Gross alpha -42.81.20 0.36 2.04 A0.0289A -.8285Gross beta 4.90.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 70: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(WSTP99) Cavendish Nuclear LimitedGreeson CourtCumbria, UK CA24 3HZ

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.11A -1.48Gross alpha 23.31.20 0.36 2.04 A0.26A -1.07Gross beta 35.40.79 0.40 1.19 W

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 71: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(WVDP01) WVDP Environmental Laboratory10282 Rock Springs RoadWest Valley, NY 14171

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0676A -0.892Gross alpha -25.71.20 0.36 2.04 A0.0125A -0.781Gross beta -1.10.79 0.40 1.19 N

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 72: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

MAPEP-16-GrF34 Combined Report

Department of Energy RESL - 1955 Fremont Ave, MS4149 - Idaho Falls, ID 83415

Laboratory Results For MAPEP-16-GrF34(WVPL01) WVDP Radiation Protection Lab10282 Rock Springs RdWest Valley, NY 14171

AnalyteUnc

ValueUncFlagResult

RefValue Flag

Bias(%)

AcceptanceRangeNotes

Units: (Bq/sample)Radiological

0.0662A -1.1219Gross alpha -6.51.20 0.36 2.04 A0.0241A -0.7962Gross beta 0.80.79 0.40 1.19 A

Radiological Reference Date: February 1, 2016

Gross Alpha Flags:

A = Result acceptable, Bias <= +/- 70% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 70% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Gross Beta Flags:

A = Result acceptable, Bias <= +/- 50% with a statistically positive result at two standard deviations (Result/Uncertainty >2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standard deviations, does not includezero).

N = Result not acceptable, Bias > +/- 50% or the reported result is not statistically positive at two standard deviations(Result/Uncertainty <= 2, i.e., the range encompassing the result, plus or minus the total uncertainty at two standarddeviations, includes zero).

Uncertainty Flags:

NOT ACCEPTABLE...........................RP<2%

ACCEPTABLE..................................2%<=RP<=15%

ACCEPTABLE WITH WARNING...........15%<RP<=30%

NOT ACCEPTABLE............................RP>30%

RP = Relative Precision

Printed 6/27/2016Issued 6/2/2016

Page 73: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

Gross alpha

MAPEP-16-GrF34

Notes:The chart shows only data points with values between -0.64 and 2.47 (± 5 Standard Deviations).

Page 74: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

Gross beta

MAPEP-16-GrF34

Notes:The chart shows only data points with values between 0.35 and 1.28 (± 5 Standard Deviations).

Page 75: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

The intent of the distribution graphs contained within this report is to graphically demonstrate to

users how % Bias data within the current MAPEP Series appears when examined by matrix, by

analyte, by method of sample preparation or by method of detection. The data points (small

'dots') plot the bias (or z-score for organic constituents) of each of the analytes in each of the

matrices. Biases greater than +/- 100% have been screened from the data. The BLACK small

vertical line inside the small rectangle at the top of the data distribution graph is the mean of the

population of the bias shown for that analyte in the matrix.

The box plots summarize the distribution of points for each analyte. The ends of the box are the 25th

and 75th quantiles. The difference between the quartiles is the interquartile range. The line across

the middle of the box identifies the median bias value. Each box has lines, sometimes called

whiskers, which extend from each end. The whiskers extend from the ends of the small box to the

outermost data point that falls within the distances computed. The bracket along the edge of the box

identified the shortest half, which is the most dense 50% of the observations. Potential outliers are

represented as small black dots.

The box plot of the bias data points and the mean visually illustrate the breadth of the

distribution and where potential outliers in the distribution might lie. The moments for the

distribution plot are provided below the Bias plot. In some cases, N becomes very small and

thus developed statistics may not accurately reflect estimates of the population if N were a

significantly larger value.

Page 76: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

������������

��������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�DOSKD%HWD�&RXQWLQJ�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 77: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

���

���

���

���

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�������������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�DOSKD%HWD�&RXQWLQJ���OLTXLG�VFLQWLOODWLRQ�FRXQWHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 78: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

����

���

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

������������

��������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�DOSKD��*URVV$OSKD�%HWD�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 79: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

��

��

��

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������

���

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV$QDO\WHB'HWHFWLRQ *URVV�DOSKD��2WKHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 80: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�����������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�EHWD��%HWD&RXQWLQJ�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 81: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�EHWD%HWD�&RXQWLQJ���OLTXLG�VFLQWLOODWLRQ�FRXQWHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 82: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

����������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB'HWHFWLRQ *URVV�EHWD��*URVV$OSKD�%HWD�����SL�JDV�IORZ�SURSRUWLRQDO�FRXQWHU

*U)�'LVWULEXWLRQ�E\�'HWHFWLRQ�0HWKRG

Page 83: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

��

����

��

����

��

����

��

����

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

���������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD��$FLGGLVVROXWLRQ�E\�VWURQJ�$TXD�5HTLD��K\GURIOXRULF�DFLG��HWF�

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 84: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD$FLG�OHDFKLQJ�ZLWKRXW�K\GURIOXRULF�DFLG

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 85: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

������������������������

���

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD��(3$�����5DGLRDFWLYLW\��*URVV�$OSKD�%HWD�6FUHHQLQJ��������������

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 86: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������

���

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVVDOSKD��(YDSRUDWLRQ��DFLGLILHG

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 87: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

����

���

���

���

���

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

������������

��������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD1R�SUHSDUDWLRQ���DQDO\]HG�DV�UHFHLYHG

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 88: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�����������������������

�������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�������������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV$QDO\WHB0HWKRG *URVV�DOSKD��2WKHU

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 89: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������

���

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�DOSKD��:HW�DVK��$FLG�GLJHVWLRQ���WKH�XVH�RI�R[LGL]HUV�WR�GHVWUR\�RUJDQLFV

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 90: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

���������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD��$FLGGLVVROXWLRQ�E\�VWURQJ�$TXD�5HTLD��K\GURIOXRULF�DFLG��HWF�

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 91: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

���

���

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD$FLG�OHDFKLQJ�ZLWKRXW�K\GURIOXRULF�DFLG

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 92: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

���������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD��(3$�����5DGLRDFWLYLW\��*URVV�$OSKD�%HWD�6FUHHQLQJ��������������

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 93: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

���

���

���

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�����������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD1R�SUHSDUDWLRQ���DQDO\]HG�DV�UHFHLYHG

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 94: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

��

��

��

��

��

��

��

��

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

�������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

�����������������������

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV$QDO\WHB0HWKRG *URVV�EHWD��2WKHU

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG

Page 95: RESL CUSTOMER EXPORT CONTROL AGREEMENT - Energy.gov · 2016-07-13 · RESL CUSTOMER EXPORT CONTROL AGREEMENT . It is the Radiological and Environmental Sciences Laboratory’s (RESL)

����

����

����

����

��

����

����

����

�����������������������������������������������������

PD[LPXP

TXDUWLOHPHGLDQTXDUWLOH

PLQLPXP

��������������������������������������������

4XDQWLOHV

0HDQ6WG�'HY6WG�(UU�0HDQ8SSHU�����0HDQ/RZHU�����0HDQ1

��������

���

6XPPDU\�6WDWLVWLFV

%LDV

'LVWULEXWLRQV�$QDO\WHB0HWKRG *URVV�EHWD��:HW�DVK���$FLGGLJHVWLRQ���WKH�XVH�RI�R[LGL]HUV�WR�GHVWUR\�RUJDQLFV

*U)�'LVWULEXWLRQ�E\�3UHS�0HWKRG


Related Documents