Page | 1
PO#:
MS040800TX
Talus Media Console
Assembly Instructions
For assistance with assembly, contact: Southern Enterprises, Inc.
Customer Service: 1-800-633-5096 [email protected]
www.seifurniturestore.com
Page | 2
1) Quantity of 1 Top
2) Quantity of 4 Support
3) Quantity of 1 Middle Panel
4L) Quantity of 1 Left Side Panel
4R) Quantity of 1 Right Side Panel
5L) Quantity of 1 Left Middle Clapboard
5R) Quantity of 1 Right Middle Clapboard
6) Quantity of 1 Bottom Panel
7R) Quantity of 1 Left Door Panel
7L) Quantity of 1 Right Door Panel
8) Quantity of 2 Side Adjustable Shelf
9) Quantity of 1 Middle Adjustable Shelf
Talus Media Console
Parts List Please check packaging for all parts and hardware before discarding. Before beginning assembly, separate each
type of hardware. Carefully study the diagrams below and check that you have all parts indicated. Call Customer Service if missing any hardware. Using the incorrect hardware will cause damage.
Page | 3
10) Quantity of 4 Leg
11) Quantity of 1 Adjustable Leg
12) Quantity of 1 Back Panel
A) Quantity of 16 Cam Bolts
B) Quantity of 28 Wood Dowels Dia. 5/16"x1-1/4
C) Quantity of 16 Cam Locks
D) Quantity of 16 Cotton Mat
E) Quantity of 8 Screw Dia.3*10
F) Quantity of 4 Bolts Dia. 5/32"x5/8"
G) Quantity of 2
Knob
H) Quantity of 2
Screw Dia.3*10
I) Quantity of 4
Bolts Dia.1/4” x1-3/8”
J) Quantity of 4
Bolts Dia.1/4”*3-1/2” x1-3/8”
L) Quantity of 8
Flat Washer Dia. 1/4”*14
M) Quantity of 8 Spring Washer Dia. 1/4”
N) Quantity of 1 Allen Wrench
O) Quantity of 2
Magnet
PL) Quantity
of 2
Page | 4
PR) Quantity of 2
Q) Quantity of 2 Cam Locks
R) Quantity of 26
Screw Dia.3*14 S) Quantity of 4 Bolts Dia. 3*x 14
T) Quantity of 12 Shelf Pin
U) Quantity of 4
Screw Dia.1/8”*5/8L”
V) Quantity of 4
Bracket
W) Quantity
of 2
Plastic chain
X) Quantity of 4
Anchor
Y) Quantity of 4
Screw Dia1/8”x1-3/8”L
Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects.
For replacement parts or questions, please call SEI Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver, Hammer (Not Included)
Page | 5
Figure 1
Insert Cam Locks (C) into corresponding holes on Supports (2). Screw Cam Bolts (A) into threaded holes on Top Panel (1). Attach Supports (2) to Top Panel (1) by inserting Cam Bolts (A) and Wood Dowels (B) into corresponding holes until all panels meet. Tighten Cam Bolts (A) by rotating
Cam Locks (C) clockwise using
Phillips screwdriver (not included).
Cover cam lock holes with Covers
(D).
Figure 2
Attach Middle Panel (3) to pre-assembled unit from Figure 1 with Bolts (I), Spring Washers (M), and Flat Washers (L). Tighten Bolts (I) with Allen Wrench (N).
Talus Media Console
Assembly Instructions
C
B
Page | 6
Figure 3
Attach Magnets (O) to pre-assembled unit from Figure 2 with Screws (S). Tighten Screws (S) with Phillips screwdriver (not included)
Figure 4
Insert Cam Locks (C) into corresponding holes on Panels (4L/4R/5L/5R). Screw Cam Bolts (A) into threaded holes on pre-assembled unit from Figure 3. Attach Panels (4L/4R/5L/5R) to pre-assembled unit from Figure 3 by inserting Cam Bolts (A) and Wood Dowels (B) into corresponding holes until all panels meet. Tighten Cam Bolts (A) by rotating
Cam Locks (B) clockwise using
Phillips screwdriver (not included).
Page | 7
Figure 5
Attach Hinges (PL/PR) to Left
Door Panel (7L) with Screws (E).
Attach Iron Plate (Q) to left Door
Panel (7L) with Screw (H).
Attach Handle (G) to Left Door
Panel (7L) with Bolts (F).
Tighten Bolts (F) and Screws
(E/H) with Phillips screwdriver (not
included).
Figure 6
Attach Hinges (PL/PR) to Right
Door Panel (7R) with Screws (E).
Attach Iron Plate (Q) to Right Door
Panel (7R) with Screw (H).
Attach Handle (G) to Right Door
Panel (7R) with Bolts (F).
Tighten Bolts (F) and Screws
(E/H) with Phillips screwdriver (not
included).
PR
Q PL
PL
QPR
Page | 8
Figure 7
Insert Cam Locks (C) into corresponding holes on pre-assembled unit from Figure 4. Screw Cam Bolts (A) into threaded holes on Bottom Panel (6). Attach Doors (7L/7R) to pre-assembled unit from Figure 4 by inserting upper hinges into corresponding holes. Lower hinges will fit into holed on Bottom Panel (6) Attach Bottom Panel (6) to pre-assembled unit from Figure 4 by inserting Cam Bolts (A) and Wood Dowels (B) into corresponding holes until all panels meet. Tighten Cam Bolts (A) by rotating
Cam Locks (B) clockwise using
Phillips screwdriver (not included).
Figure 8
Attach Legs (10) to pre-assembled
unit from Figure 7 with Bolts (J),
Spring Washers (M), and Flat
Washers (L).
Tighten Bolts (J) with Allen
Wrench (N).
Attach Middle Leg (11) to
pre-assembled unit from Figure 7
by hand.
A
Page | 9
Figure 9
Flip over pre-assembled unit from Figure 8 so that the unit is resting on its legs. Attach Back Panel (12) to pre-assembled unit from Figure 8 with Screws (R). Tighten Screws (R) with Phillips screwdriver (not included).
Figure 10
Insert Shelf Pins (T) into desired pre-drilled holes on pre-assembled unit from Figure 9. Place Shelf Panels (8/9) on Shelf Pins (T).
T
Page | 10
Figure 11
Attach Brackets (V) to back of pre-assembled unit from Figure 10 using Screws (U). Tighten Screws (U) using Philips screwdriver (not included). Mark two desired locations on wall. Drill two 3/16" holes on wall. Insert Plastic Anchors (X) into the 2 holes on wall, tap with hammer (not included) as needed Attach Brackets (V) to wall using Screws (Y). Tighten Screws (Y) using Philips screwdriver (not included).
Figure 12
Move this item close to the wall. Tie Brackets (V) together with Plastic Chains (W). Anti-tipping hardware must be used for this product to avoid tipping and injury. Now you Talus Media Console is ready for use!
WALL
WALL
Page | 11
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [email protected]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service: 1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page | 12
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 46” and
supports up to 85 lb.
The top shelf is NOT INTENDED for tube televisions.
Each VCR shelf should not be loaded with more than 20 lb
Each middle shelf should not be loaded with more than 20 lb
Each side shelf should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD.
Use with products heavier than the maximum sizes and weights indicated may result in
instability, causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside
drawer.
Do not allow children under 16 years to move the media console.
Model: MS040800TX
Talus Media Console
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 11/28/2015