YOU ARE DOWNLOADING DOCUMENT

Please tick the box to continue:

Transcript
Page 1: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

Mark Taber-Miller

Universal Ropes Course Builders, Inc.

REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS

Page 2: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

Why We Are HereCome learn and talk about adventure parks or self guided ropes courses – what are they, how are they used, when might they fall under state regulations and when they do not.

Page 3: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

DefinitionsChallenge Course – A Challenge Course is

a facility or facilities consisting of one or more elements that challenge participants as part of a supervised educational, recreational, or therapeutic curriculum, not located in an amusement park.

- ACCT -

Page 4: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

DefinitionsAdventure Park – A Self guided, static

self-belayed adventure course; that utilizes a combination of traditional and non traditional high ropes course, zip line, and climbing elements for recreational and commercial purposes, with 100% tie off for increased participant safety.

-Experiential Systems -

Page 5: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

DefinitionsAmusement Ride or Device – A device or

combination of devices or elements that carry, convey, or direct a person(s) over or through a fixed or restricted course or within a defined area, for the primary purpose of amusement or entertainment.

- American Society of Testing and Materials (ASTM) International -

Page 6: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

DefinitionsAmusement ride—A

device that carries, suspends or conveys passengers along, around or over a fixed or restricted route or course or within a defined area, for the purpose of giving its passengers amusement, pleasure, thrills or excitement. - 7 PA Act 139.2-

Page 7: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

State DefinitionsPennsylvania – January 23, 2009

 

Extreme Sports (including Climbing Walls and Bungee Trampolines).

Although there is no current ASTM International categorization of this type of amusement ride or amusement attraction, ASTM International is currently moving toward establishing such a categorization. In the interim, the Department believes it is appropriate to establish a distinct category for this type of ride or attraction, in these “extreme sports” attractions tend to be aggregated at facilities that do not have other types or rides or attractions on site. PA Dept. of Agriculture

Page 8: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

Current Regulations By StateUS State By State

Regulation

Page 9: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

State Inspection Requirements

Page 10: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

What does PA Currently Regulate?ZiplinesAerial Adventure ParksClimbing WallsClimbing TowersHigh Challenge CoursesLow Ropes Courses

Page 11: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

What does PA Currently RequireOperators ManualDocumented InspectionsEngineered drawings or plans for InstallationRide to be Licensed.

To What Standard – ASTM F-24 standards where applicable. In the absence of the ASTM Standards for Design– the

Association For Challenge Course Technology (ACCT) standards may be used.

The state will revisit this policy when a final Challenge Course/Zip Line standard is released from ASTM (2014?)

Page 12: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

Things to Look forDaily documented and signed pre-opening inspection.Functional test of all communication systems.Inspection or test of all automatic and manual safety

devices.Replacement parts – Shall be procured from the original

manufacturer of the element (s) using the appropriate manufacturer supplied identifying nomenclature. Or procured or produced using appropriate original manufacturing drawings or specifications (both preferred).

Manufacturer shall supply a description of the recommended daily, pre-opening inspections to be performed.

Page 13: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

What To Look For– Cont.Manufacturer shall provide a description, including

frequency of regular maintenance inspections and testing, in addition to daily inspection descriptions.

Manufacture shall provide recommended wear limits or tolerances for components and training and /or tools for operator/owner to make appropriate assessment.

Procedures for extended periods of non use shall be provided by the manufacture.

Manufacture shall provide supplemental notification bulletins that are relevant after the initial product sale – for as long as product/system is in use.

Bulletins shall use standard ASTM form and be: Red for Safety AlertBlue for Service BulletinsGreen for Notifications.

Page 14: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

What To Look For– Cont.The program of maintenance Shall include a

checklist covering each ride or element.Information RequirementsInformation Plate printed in English shall be

clearly available for visual inspection.Serial Number (if applicable)Name or definition of Element or StructureDate of manufacture (completion of construction)Participant weight capacityMaximum Number of participants to be on Structure

simultaneously (whole course, platforms, elements)Estimated ride speed (feet per second)

Page 15: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

What To Look For– Cont.Manufacturer shall provide instructions for the

patron (information that shall be made available for every patron – waivers, signage, etc.)

Operational restrictions relating to environmental conditions like wind, rain, or temperature.

Location for all ride operators to be stationed during operations.

Description of series of all steps to be followed in a definite order to operate the ride or rides.

Evacuation procedures and rescue procedures.

Page 16: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

Documentation of Ride AnalysisA ride analysis shall be conducted that

includes: Patron constraint analysis (can’t fall out of harness –no seat harnesses); Patron Clearance Envelope – participant shall have no ability to contact non-intended structures (other elements, trees, etc.); Failure analysis –this shall include identifying the most significant factors that may affect participant safety (unhooking from harness, splinters on wood, zipping to fast and hitting pole or structure, etc.); A means to mitigate each identifiable safety issue shall be provided.

Page 17: Mark Taber-Miller Universal Ropes Course Builders, Inc. REGULATION OF CHALLENGE COURSES, CANOPY/ZIPLINE TOURS AND ADVENTURE PARKS.

Resources


Related Documents