WIRELESS CHARGING OF MOBILE PHONES USING MICROWAVES S.NEERAJ REDDY 09L71A0417 SEMINAR PRESENTED BY
Jun 21, 2015
WIRELESS CHARGING OF MOBILE PHONES USING MICROWAVES
S.NEERAJ REDDY09L71A0417
SEMINAR PRESENTED BY
CONTENTSOVERVIEWINTRODUCTIONMICROWAVESTRANSMITTER DESIGNRECEIVER DESIGNWORKING PRINCIPLESENSOR CIRCUITRYAPPLICATIONSCONCLUSION
OVERVIEWAutomatic recharging of the mobile phones.Use of microwaves.Slotted wave guide antenna.Sensor, a “Rectenna”, and a filter to the mobile handset.Need for separate chargers for mobile phones is
eliminated.
INTRODUCTIONElectromagnetic
spectrumThree physical properties
MICROWAVES
Electromagnetic waves. Frequency range .3GHz – 300GHz. Remote sensing. Communication industry. Different bands. 2.45 GHz ISM band
TRANSMITTER OUTER DESIGNHigh power
microwave oscillator
Special kind of vacuum tube
Efficiency 50 to 80 %
TRANSMITTER INNER DESIGN
Uses CROSSED-ELECTRON & MAGNETIC fields
RECEIVER DESIGN Rectenna Constructed from a schottky diode placed between antenna dipoles.Microwaves are received with about 85% efficiency at 2.45GHz.
PRINCIPLE OF OPERATION
WORKING PRINCIPLERectifying circuit.Different from a
common P/N silicon diode.
Power consumption.Very low noise index.
SENSOR CIRCUITRYDetects if the mobile
phone receives any message signal.
900MHz or 1800MHz for the GSM system.
LM2907 (F TO V Converter).
Acts as a switch
ADVANTAGESNeed for separate chargers for mobile phones is
eliminated.Charges “anywhere anytime” within the location of
waves.
APPLICATIONS MOPAR WIRELESS HOME MOJO
CONCLUSIONNovel method of using “power of
microwaves”Can carry in case of “devoid facilities”
THANK YOU