Top Banner
By Piero Belforte, July 2010
42

We were pioneers: early applications of dwn simulations_2

Jan 20, 2015

Download

Technology

Piero Belforte

The early applications (1970s) of a revolutionary electrical circuit simulation method (DWN) are presented including device modelling and signal integrity driven design of high speed digital modules. These modules were utilized to develop the prototypes of digital switching systems deployed in Italian Telecom network in the 1970s.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: We were pioneers: early applications of dwn simulations_2

By Piero Belforte, July 2010

Page 2: We were pioneers: early applications of dwn simulations_2

PrefaceIn the early 70s CSELT Labs (Turin,Italy) developed the

first digital switches deployed in the Italian network.

The Switching Techniques lab, headed by Piero Belforte, had the mission of developing a modular technologyfor fast prototyping of high-speed digital systems

A CAD methodology for prediction of high-speedinterconnects behavior was strongly needed…

Page 3: We were pioneers: early applications of dwn simulations_2

The environment (1) IBM’s ASTAP circuit simulation program was only

available on mainframe computers.

ASTAP was very slow and inaccurate dealing withtrasmission line and propagation effects.

Accurate models of ICs I/O ports were not available.

Page 4: We were pioneers: early applications of dwn simulations_2

The environment (2) The expression “Signal Integrity” didn’t exist.

The IBIS models of Ics were not yet invented.

The S-parameter concept was only used in the Microwave field in the frequency domain.

The Eye-Diagram representation of digital signals wasonly used in the Transmission System domain.

Page 5: We were pioneers: early applications of dwn simulations_2

The environment (3) HP launches the first desktop calculators (9800

series).

Tek 7S12 TDR unit has already a 25 ps risetimecapability.

HP introduces the HPIB instrumentation control bus.

DSP techniques were already known but never

applied to circuit simulation.

Page 6: We were pioneers: early applications of dwn simulations_2

Hp 9800 Series technologyhttp://www.hpmuseum.org/tech98xx.htm

8MHz 16-bit processor.

Microcode stored in bipolar ROM (7 ICs were used to supply 256 28 bit words.)

Firmware stored in 4K bit ROM chips organized as 512 8 bit words.

Intel 1103 1K bit PMOS dynamic RAM ICs.

16-character LED display

Philips cassette magnetic-tape cartridge drive

HPL algebraic programming language

HPIB bus card for instrument control

Page 7: We were pioneers: early applications of dwn simulations_2

The TEK 7S12 TDR/Sampler Unit(25ps rise time)

Page 8: We were pioneers: early applications of dwn simulations_2

THE WINNING IDEAS1) Apply DSP (Digital Signal Processing) techniques

to circuit simulation.

2) Use Wave variables instead of classical voltage and currents tomodel propagation effects.

3) Use TDR as Time-domain S-parameter extractor from actualdevices .

4) Integrate Modelling & Simulation Environments using a Desktop calculator for both controlling instruments and runnigsimulations.

5) Extensive use of PRBS sequences as stimulus and EYE-DIAGRAMS to evaluate signal prameters ( eye opening, jitter, Noise margins).

Page 9: We were pioneers: early applications of dwn simulations_2

Piero (left) and his colleague Giancarlo (right) with the HP9821 desktop calculator used for the first versions of the simulator (circa 1974)

Page 10: We were pioneers: early applications of dwn simulations_2

Published paper showing the Digital Wave DSP algorithms usedfor modelling and simulation of high-speed interconnects

Page 11: We were pioneers: early applications of dwn simulations_2

Cellular topology (N transmission-line cells) interconnection structure modelled by the DWN program

Page 12: We were pioneers: early applications of dwn simulations_2

Digital Network model of the cellularinterconnection structure

Page 13: We were pioneers: early applications of dwn simulations_2

DWN Simulation Program features

The whole DWN algorithm for the modular structurerequired about 250 lines of HPL code and was written byUgo Colonnelli.

The output waveforms were plotted on a HP 9862A plotter driven by the calculator.

The accuracy and speed performance was much better thanIBM’s ASTAP circuit analysis program running on a mainframe computer .

Page 14: We were pioneers: early applications of dwn simulations_2

Layout of a microstrip test circuit used for

validation of simulator’s results (TDR response)

Page 15: We were pioneers: early applications of dwn simulations_2

Plot of simulated (s) and measured (m) one-port TDR

responses of the test circuit (1975)

Page 16: We were pioneers: early applications of dwn simulations_2

Simulation (s) vs measure (m) of a 220 Mbit/s MECL III pcb interconnect (1975) using a PRBS stimulus

Page 17: We were pioneers: early applications of dwn simulations_2

ECL multi-drop backplane bus

Page 18: We were pioneers: early applications of dwn simulations_2

Simulated and measured Eye-diagrams of the multi-

drop bus carrying a 100Mbit/s PRBS stream (1975)

Page 19: We were pioneers: early applications of dwn simulations_2

Early HPIB automatic bench for modelling active and passive device based on Tek 7S12 TDR (1974)

Page 20: We were pioneers: early applications of dwn simulations_2

Automatic I/O model extraction from biasedTDR measures (S-parameters) of IC ports

Page 21: We were pioneers: early applications of dwn simulations_2

THICK-FILM HIGH-SPEED HYBRID CIRCUIT

Page 22: We were pioneers: early applications of dwn simulations_2

Thin-film hybrid clock driver designedfor 500Mhz clock distribution

Page 23: We were pioneers: early applications of dwn simulations_2

MEASUREMENT SETUPS FOR TDR I/OCHARACTERIZATIONS OF HYBRID CLOCK DRIVERS

Page 24: We were pioneers: early applications of dwn simulations_2

BIASED TDR INPUT RESPONSES

Page 25: We were pioneers: early applications of dwn simulations_2

BIASED TDR OUTPUT RESPONSES

Page 26: We were pioneers: early applications of dwn simulations_2

TEST BOARD FOR TDR CHARACTERIZATION

Page 27: We were pioneers: early applications of dwn simulations_2

DWN simulations of 250Mhz clock waveforms ofthe hybrid clock driver at various fan outs

Page 28: We were pioneers: early applications of dwn simulations_2

250 Mbit/s module designed using the DWN methodology (1974)

Page 29: We were pioneers: early applications of dwn simulations_2

Backplane twisted pair interconnectsamong high-speed modules

Page 30: We were pioneers: early applications of dwn simulations_2

COLLECTION of hybrid circuits designed and characterized using DWN (1973-1975)

Page 31: We were pioneers: early applications of dwn simulations_2

Interconnect optimization for a high-speed (.5 Gbps) MCM using simulated eye diagrams (1975)

Page 32: We were pioneers: early applications of dwn simulations_2

.5 Gbps MCM module fully designed by means of DWN modelling and simulations (1975)

Page 33: We were pioneers: early applications of dwn simulations_2

Low-cost high-speed module for fast prototyping of digitalsystems fully optimized by DWN (1978)

Page 34: We were pioneers: early applications of dwn simulations_2

EYE-DIAGRAM PARAMETERS FOR INTERCONNECT PARAMETERS EVALUATION

Page 35: We were pioneers: early applications of dwn simulations_2

TDR Characterization of the connector

Page 36: We were pioneers: early applications of dwn simulations_2

TLM model of the connector (DWN simulation)

Page 37: We were pioneers: early applications of dwn simulations_2

SETTING OF INTER-MODULE BACKPLANE INTERCONNECT RULES BY SIMULATION

Page 38: We were pioneers: early applications of dwn simulations_2

INTER-MODULE CLOCK INTERCONNECT PARAMETERS VS FREQUENCY (From DWN SIMs)

Page 39: We were pioneers: early applications of dwn simulations_2

High-speed prototype of a digitalswitch built up using .5Gps modules

Page 40: We were pioneers: early applications of dwn simulations_2

TEST SETUP OF A HIGH-SPEED DIGITAL SUBSYSTEM PROTOTYPE

Page 41: We were pioneers: early applications of dwn simulations_2

WEB LINKS (1) http://it.linkedin.com/in/pierobelforte

http://www.slideshare.net/pierobelforte

http://sites.google.com/site/pierobelforte/Home/piero-s-papers-1

http://www.linkedin.com/groups?mostPopular=&gid=2673743

http://docs.google.com/viewer?a=v&pid=sites&srcid=ZGVmYXVsdGRvbWFpbnxwaWVyb2JlbGZvcnRlZG9jfGd4OjMwNzY5MjUzZjM1ZTJjNzQ

Page 42: We were pioneers: early applications of dwn simulations_2

WEB LINKS (2) http://www.hp9825.com/html/hpib1.html

http://www.hp9825.com/html/hp_9810_20_30.html

http://www.hpmuseum.org/hp9820.htm