WCDMA RNP Parameter Configration BaseLine__B02D108

Revision recordVersionRevision dateModification descriptionV1.02003/12/01Initial version.Its parameter should be in accordance with that of WCDMA RNP_TS Network Planning Data Configuration Table_V2.0, and the parameter value should be in accordance to that of WCDMA RNP System Parameter Setting GuideV2.12003/12/18Update based on WCDMA RNP_TS Network Planning Data Configuration Table V2.1, the version No. is the same with that of the WCDMA RNP_TS Network Planning Data Configuration TableV2.22003/12/22Update based on WCDMA RNP_TS Network Planning Data Configuration Table V2.2, the version No. is the same with that of the WCDMA RNP_TS Network Planning Data Configuration Table2004/02/08Change file name from V2.2 to B02D208

Templet descriptionWCDMA Network Planning Data Configuration Table Templet DescriptionTemplet version:V1.0Corresponding to the version BSC6800V100R002 of BSCGeneral description:1. The total 18 working tables are divided by types of parameters (not all) that are constantly changed in network optimization.2. The table is output in network planning to serve as the standard of network planning parameter when the operator makes data. It can be imported by using the data configuration engineering auxiliary system.3. The first line is the parameter name, the second line is the parameters' description and the data record starts from the third line.4. Follow the note of each column to fill the parameters. (Supported by the subsequent versions)5.There are 186 parameters in total.Detailed descriptionParameter table nameDescriptionParameter Number1RNCSystemParasDescribe the RNC system Parameter configuration112RNCRegionInfDescribe the location area information in RNC53RNCAlgParaDescribe the parameter information related with RNC algorithm44CellBasicInfoDescribe the basic configuration information of cells195CellTrafficPowerDescribe downlink power configuration information of service in different rates of cells66CellSelReselParasDescribe the configuration information of selection and re-selection parameter of cells117CellPowerRatioParasDescribe the power distribution rate information of the downlink public channels of cells168CellPrachParasDescribe the configuration information of random access parameters of cells79CellCACParasDescribe the call admission control parameters of cells1510CellIntraFreqHOMrParasDescribe the parameter configuration of intra-frequency measurement control and soft handover algorithm of cells2011CellInterFreqHOMrParasDescribe the parameter configuration of inter-frequency measurement control and hard handover algorithm of cells1712CellInterRATHOMrParasDescribe the parameter configuration of inter-RAT measurement control and handover algorithm of cells713CellOtherParaThe parameter configuration of other algorithms of cells714IntraFreqNcellDescribe the relation between a RNC cell and its intra-frequency adjacent cell615InterFreqNcellDescribe the relation between a RNC cell and its inter-frequency adjacent cell616ConInterFreqNcellDescribe the relation between a RNC cell and its adjacent cell that is inter-frequency but has the same coverage area with the cell317InterRatnNcellDescribe the relation between a RNC cell and its GSM adjacent cell618NRNCCellDescribe the configuration information of the adjacent cell in neighboring RNC1119GSMCellDescribe the configuration information of the adjacent cell in neighboring GSM9Label color indicationBlueDescription listPurpleRNC parameter listGreenNodeB parameter listYellowRNC cell parameter listPinkRNC neighbour cell parameter listNote:1.Existing in parameters of wireless layer and transmission layer, NodeBName and SSN should be in accordance with the parameter of the transmission layer.

RNCSystemParasRNC IDMCCMNCT3212ATTNMON312T312N313T313N315Radio network controller identificationMobile Country CodeMobile Network CodePeriodical location update timerAttach/detach allowed indication.Network operating modeConstant 312Timer312Constant 313Timer313Constant 315Defined By OperatorDefined By OperatorDefined By Operator1ALLOWEDMode2D11D503D1

Number of consecutive synchronous indications for private physical channel toestablish connectionsTimer for private physical channel creationNumber of consecutive synchronous indications for private physical channel connection creation (only the third line of the column is valid)Timer for private physical channel creation (only the third line of the column is valid)When the wireless link failure standards are reached, the wireless bearing related with the timer T315 will start the timer and you can re-configure the wireless link through cell update before the timer expiresOnly the third line of the column is validOnly the third line of the column is validCorrespond to 1sCorrespond to 6minZhou-XinJie:If there is Gs interface between MSC and SGSN, select MODE1,otherwise, select MODE2huawei:Oncehuawei:Correspond to 50 timeshuawei:Correspond to 3 seconds .huawei:Once

RNCRegionInfRNC IDLACRACSACURA IDRadio network controller identificationLocation area codeRoute area codeService area codeUTRAN registration area identificationDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By Operator

RNCAlgParaRNC IDMACCPAGEREPEATFpmdcCombineDelayValueBEBitRateThdRadio network controller identificationNumber of retransmissions of paging message in RNC.Maximum delay of macro diversityDecision threshold of BE service handover rateDefined By Operator120D64

Correspond to 20msZhou-XinJie:64kbpshuawei:Once

CellBasicInfoNodeNameSSNCellNameCellIDLoCellLACRACSACURA IDTcellMaxTxPowerUARFCNUplinkUARFCNDownlinkPScrambCodeNInsyncIndNOutsyncIndTRLFAailureServiceIndCellBarredBTS nameSubsystem No.Cell nameCell identificationLocal cell identificationLocation area codeRoute area codeService area codeUTRAN registration area identificationTime offset between BFN and start time of SCH, CPICH and DL scrambling.Cell maximum transmission powerUplink frequencyDownlink frequencyMain downlink scrambleConsecutive synchronous indication numberConsecutive out-of-syn indication numberRadio link failure timer lengthCN field indicationCell access barred indicationDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By Operator430Defined By OperatorDefined By OperatorDefined By Operator5550SUPPORT_CS_AND_PSNOT_BARRED

chenjing:Add in v2.0chenjing:Added in V2.0Zhou-XinJie:NodeBNameSSNZhou-XinJie:NodeBNameSSNCorrespond to 5shuawei:Correspond to 5 times.huawei:Correspond to 5 times.huawei:Correspond to 43dBm

CellTrafficPowerCellNameCellIdCN field IDMaxBitRateMaxDLPWRMinDLPWRCell nameCell identification0~CS domain , 1~PS domain.Maximum rate of serviceMaximum downlink transmission powerMinimum downlink transmission powerDefined By OperatorDefined By Operator012200Defined By OperatorDefined By OperatorDefined By OperatorDefined By Operator064000Defined By OperatorDefined By OperatorDefined By OperatorDefined By Operator164000Defined By OperatorDefined By OperatorDefined By OperatorDefined By Operator1144000Defined By OperatorDefined By OperatorDefined By OperatorDefined By Operator1384000Defined By OperatorDefined By Operator

chenjing:Define the maximum and minimum downlink transmission power for each cell, such as CS28K, CS32K, CS56K, CS64Kchenjing:Only two IDs are available:CS orPSZhou-XinJie:0 stands for CS, and 1 stands for PSZhou-XinJie:Maximum transmission power-25Zhou-XinJie:Set according to the link predictionZhou-XinJie:Maximum transmission power-25Zhou-XinJie:Set according to the link predictionZhou-XinJie:Maximum transmission power-25Zhou-XinJie:Set according to the link predictionZhou-XinJie:Maximum transmission power-25Zhou-XinJie:Set according to the link predictionZhou-XinJie:Maximum transmission power-25

CellSelReselParasCellNameCellIdQqualminQrxlevminMaxAllowedUlTxPowerQhyst1sTresectionsQhyst2sSintrasearchSintersearchSsearchratCell nameCell identificationMin quality standardMin receiving levelMax uplink transmission power allowed for UEMeasurement hysteresis 1Re-select delayMeasurement hysteresis 2Intra-frequency cell re-selects the start thresholdInter-frequency cell re-selects the start thresholdInter-system re-selects the start thresholdDefined By OperatorDefined By Operator-18-5821201322

Zhou-XinJie:Correpond to-18dBZhou-XinJie:Correspond to -115dBmZhou-XinJie:RSCP measurement hysteresis, correspond to 4dBZhou-XinJie:Ec/Io measurement hysteresis, correspond to 2dBZhou-XinJie:Correspond to 6dBZhou-XinJie:Correspond to 4dBZhou-XinJie:Correspond to 4dBZhou-XinJie:Correspond to 21dBm

CellPowerRatioParasCellNameCellId PcpichPowerMaxPcpichPowerMinPcpichPowerPschPowerSschPowerBchPowerPchPowerPICHPowerOffsetAICHPowerOffsetFACHCHNOMaxFachPower4MaxFachPower5MaxFachPower6MaxFachPower7Cell nameCell identificationPCPICH transmission powerPcpich max transmission powerPcpich min transmission powerP-SCH transmission power (correspond to PCPICH)S-SCH transmission power (correspond to PCPICH)PCCPCH transmission power (Correspond to PCPICH)PCH transmission power (correspond to PCPICH)PICH Power offsetAICH power offsetFACH channel numberFach4 transmission power (correspond to PCPICH)Fach5 transmission power (correspond to PCPICH)Fach6 transmission power (correspond to PCPICH)Fach7 transmission power (correspond to PCPICH)Defined By OperatorDefined By OperatorDefined By Operator330300-50-50-2020-3-12Defined By Operator20202020

chenjing:The field is not RNC parameter, so it should be added according to the data configuration.you should judge whether to read the subsequent columns based on this parameterchenjing:4 is the ID of the transmission channelchenjing:5 is the ID of transmission channelchenjing:6 is the ID of the transmission channelchenjing:7 is the ID of the transmission channelZhou-XinJie:correspond to 33dBmZhou-XinJie:Correspond to 30dBmZhou-XinJie:Correspond to PCPICH power-5dBZhou-XinJie:Correspond to PCPICH power-5dBZhou-XinJie:Correspond to PCPICH power-2dBZhou-XinJie:Correspond to PCPICH power 2dBZhou-XinJie:Correspond to PCPICH power-3dBZhou-XinJie:Correspond to PCPICH power-12dBZhou-XinJie:Correspond to PCPICH power 2dBZhou-XinJie:Correspond to PCPICH power 2dBZhou-XinJie:Correspond to PCPICH power 2dBZhou-XinJie:Correspond to PCPICH power 2dBZhou-XinJie:two or four

CellPrachParasCellNameCellIdPreambleThresholdConstantValuePowerRampStepPreambleRetransMax PowerOffsetPpmCell nameCell identificationRandom access preamble thresholdRandom access initial transmission power constant valuePreamble power ramp stepMax number of preamble retransmissionPower offset of preamble and message controlDefined By OperatorDefined By Operator32-232200

Zhou-XinJie:correspond to-20.0dBZhou-XinJie:correspond to-23dBZhou-XinJie:Correspond to 2dBZhou-XinJie:Correspond to 0dBHua wei: Correspond to 20 times

CellCACParasCellNameCellIdCellEnvTypeOrthoFactorUlConvThdDlConvThdUlOtherThdDlOtherThdDlHoThdUlTotalKThdDlTotalKThdMaxUlTxPowerforConv MaxUlTxPowerforStr MaxUlTxPowerforIntMaxUlTxPowerforBacCell nameCell identificationCell environment typeOrthogonal factorUplink threshold for conversation serviceDownlink threshold for conversation serviceUplink threshold for other servicesDownlink threshold for other servicesDownlink threshold handoverFactor threshold of uplink services normalizationFactor threshold of downlink services normalizationMaximum uplink transmission power conversation serviceMaximum uplink transmission power for stream serviceMaximum uplink transmission power for interactive serviceMaximum uplink transmission power of background serviceDefined By OperatorDefined By OperatorDefined By Operator400750657506580808021242424

Zhou-XinJie: 75Zhou-XinJie:65Zhou-XinJie:75Zhou-XinJie:65Zhou-XinJie:80Zhou-XinJie:Correspond to 21dBmZhou-XinJie:24dBmZhou-XinJie:24dBmZhou-XinJie:24dBmZhou-XinJie:0.4,if it is 0, it stands for orthogonalityZhou-XinJie:CASE1,CASE2,CASE3

CellIntraFreqHOMrParasCellNameCellIdFilterCoefIntraRelThdFor1AIntraRelThdFor1BIntraAblThdFor1EIntraAblThdFor1FHystfor1AHystfor1BHystfor1CHystfor1DHystfor1EHystfor1FWEIGHTTrigTime1ATrigTime1BTrigTime1CTrigTime1DTrigTime1ETrigTime1FCell nameCell identificationIntra-frequency measurement filter coefficientRelative threshold for 1A eventRelative threshold for 1B eventAbsolute threshold for 1E eventAbsolute threshold for 1F eventTrigger hysteresis for 1A eventTrigger hysteresis for 1B eventTrigger hysteresis for 1C eventTrigger hysteresis for 1D eventTrigger hysteresis for 1E eventTrigger hysteresis for 1F eventWeight factor1A event delay trigger time1B event delay trigger time1C event delay trigger time1D event delay trigger time1E event delay trigger time1F event delay trigger timeDefined By OperatorDefined By OperatorD51010-18-1868886810D640D640D640D640D640D640

Zhou-XinJie:Correspond to 5dBZhou-XinJie:Correspond to 5dBZhou-XinJie:Correspond to -18dBZhou-XinJie:Correspond to -18dBZhou-XinJie:Correspond to 3dBZhou-XinJie:Correspond to 4dBZhou-XinJie:Correspond to 4dBZhou-XinJie:Correspond to 4dBZhou-XinJie:Correspond to 3dBZhou-XinJie:Correspond to 4dBZhou-XinJie:Correspond to 1Zhou-XinJie:Correspond to 640msZhou-XinJie:Correspond to 640msZhou-XinJie:Correspond to 640msZhou-XinJie:Correpond to 640msZhou-XinJie:Correpond to 640msZhou-XinJie:Correspond to 640ms

CellInterFreqHOMrParasCellNameCellIdFilterCoefHystfor2DHystfor2FHystforHHOTrigTime2DTrigTime2FTrigTimeHHOInterThdUsedFreqFor2DECNOInterThdUsedFreqFor2FECNOInterThdUsedFreqFor2DRSCPInterThdUsedFreqFor2FRSCPHHOThdRSCPHHOThdEcNoPeriodReport IntervalCELLPROPERTYCell nameCell identificationInter-frequency measurement filter coefficientHysteresis for 2D eventHysteresis for 2F eventHysteresis for hard handoverDelay trigger time for 2D eventDelay trigger time for 2F eventDelay trigger time for hard handoverAbsolute threshold for 2D EC/N0Absolute threshold for 2F EC/N0Absolute threshold for 2D RSCPAbsolute threshold for 2F RSCPInter-freq HHO RSCP thresholdInter-freq HHO Ec/No thresholdPeriodic report intervalCell location propertyDefined By OperatorDefined By OperatorD4666D640D640D640-24-24-95-95-85-16D500Defined By Operator

Zhou-XinJie:correspond to 3dBZhou-XinJie:correspond to 3dBZhou-XinJie:correspond to 3dBZhou-XinJie:correspond to 640msZhou-XinJie:640msZhou-XinJie:correspond to 640msZhou-XinJie:correspond to -24dBZhou-XinJie:Correspond to -24dBZhou-XinJie:Correpond to -95dBmZhou-XinJie:correspond to -95dBmZhou-XinJie:Cell edgeCARRIER_FREQUENCY_VERGE_CELLCell centerCARRIER_FREQUENCY_CENTER_CELLhuawei:-85 dBmhuawei:-16 dBmhuawei:500 ms

CellInterRATHOMrParasCellNameCellIdFilterCoefRptIntervalGsm RSSIThdHystThdTimeToTrigForSysHoCell nameCell identificationInter-RAT measurement filter coefficientReport intervalGSM RSSI thresholdHysteresisInter-RAT handover trigger timeDefined By OperatorDefined By OperatorD4D1000264D5000

huawei:Report interval : 1shuawei:Correspond to -85 dBmhuawei:Correspond to 2 dB.huawei:Correspond to 5 s.

CellOtherParaCellNameCellIdSirAdjustPeriodCmcfCellTypeSFTurnPointCSTHRESHOLDMINSIGNALREQUIREDCell nameCell identificationOLPC Adjust periodCompressed cell typeSpread frequency factor thresholdCandidate set absolute thresholdMinimum Ec/No valueDefined By OperatorDefined By Operator40Defined By OperatorD64-16-18

Zhou-XinJie:Compressed mode parameter. If the spread frequency factor is no less than the threshold, use SF/2, otherwise you should choose the puncture method.chenjing:Retry the parameter directlychenjing:Retry the parameter directlyZhou-XinJie:400mshuawei:Correspond to -16dBhuawei:Correspond to -18 dB

IntraFreqNcellCellNameCellIdNCellIDCellIndividalOffsetQOffset1snQOffset2snCell nameCell identificationAdjacent cell IDCell offsetCell offset of center and neighboring cells for CPICH RSCP during cell reselectionCell offset of center and neighboring cells for CPICH Ec/No during cell reselectionDefined By OperatorDefined By OperatorDefined By Operator000

huawei:Correspond to 0huawei:Correspond to 0 dBhuawei:Correspond to 0 dB

InterFreqNcellCellNameCellIdNCellIDCellIndividalOffsetQOffset1snQOffset2snCell nameCell identificationNeighboring cell IDCell offsetCell offset of center and neighboring cells for CPICH RSCP during cell reselectionCell offset of center and neighboring cells for CPICH Ec/No during cell reselectionDefined By OperatorDefined By OperatorDefined By Operator000

huawei:Correspond to 0 dBhuawei:Correspond to 0 dBhuawei:Correspond to 0 dB

ConInterFreqNcellCellNameCellIdNCellIDCell nameCell identificationNeighboring cell IDDefined By OperatorDefined By OperatorDefined By Operator

InterRatnNcellCellNameCellIdCIDCellIndividualOffsetQoffset1snQrxlevminCell nameCell identificationID of the neighboring GSM cellCell individual offsetCell offset of center and neighboring cells for CPICH RSCP during cell reselectionMinimum received levelDefined By OperatorDefined By OperatorDefined By Operator00-58

huawei:Correspond to -115dBmhuawei:Correspond to 0 dBhuawei:Correspond to 0 dB

NRNCCellCellNameCellIdLACRacPScrambCodeUARFCNDownlinkUARFCNUplinkQqualminQrxlevminMaxAllowedUlTxPowerPcpichPowerName of the adjacent cellIdentification of the adjacent cellLocation area codeRouting area codePrimary downlink scrambleDownlink frequency pointUplink frequency pointLowest quality standardMinimum received levelMaximum transmit power allowedPCPICH transmit powerDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By Operator-18-5821330

Zhou-XinJie:-18dBZhou-XinJie:-115dBmZhou-XinJie:21dBmZhou-XinJie:33dBm

GSMCellCIDMCCMNCLACNCCBCCBandIndBcchArfcnRatCellTypeAdjacent GSM cell identificationMobile country codeMobile network codeLocation area codeNetwork color codeBTS color codeInter-system cell frequence band indicatorInter-system cell frequency No.Inter-system cell typeDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By OperatorDefined By Operator