VWR FOR SIEVING...VWR FOR SIEVING | WR 11 Test sieves Frame: Stainless steel; woven wire cloth: Stainless steel, ISO 3310, ASTM E11, BS 410, AFNOR Ø (mm) Height (mm) Mesh size (mm)

VWR® FOR SIEVING

Test sieve shakers and accessories

Ultrasonic sieving systems

Sample splitters

Test sieves

Standards

Ultrasonic baths

Useful accessories

P:1800 008 453 | www.bio-strategy.comE: [email protected]

Available from

VWR Products are sold exclusively at Bio-Strategy in Australia and New Zealand

A re-certification service is also available, please contact your local VWR sales office.

10 VWR | VWR® FOR SIEVING

Control of measuring instruments and inspection certificates for VWR test sieves

EN ISO 9000 ff. standard requires measuring instruments to be inspected at regular intervals. This also includes test sieves that are used as measuring instruments.

VWR offers you the opportunity to examine test sieves by using a computerised video analysis system at the manufacturers’ works laboratory or on-site. During the inspection, aperture sizes are measured and recorded in warp and weft direction. Statistical analysis is then used to verify the quality of the test sieve.

Following inspection, test sieves receive a seal. For each inspected test sieve, the customer obtains an Inspection Certificate 3.1 according to EN 10204 showing the distribution of aperture widths in graphic (for test sieve cloth only) and tabular form, as quality assurance documentation.

Test sieves are inspected by specially skilled people at the manufacturer’s factory using a calibrated computerised video analysis system. The ‘Materialprüfungsanstalt für das Bauwesen, Institut für Baustoffe, Massivbau und Brandschutz (MPA IBMP TU Braunschweig) Institute’ confirms that the manufacturer’s measuring device corresponds to ISO 3310-1:2000 (5.2, Test Methods Test 3) and ASTM E 11-01 (‘Test methods for checking wire cloth and testing sieves’) to determine whether they conform to specification. The manufacturer’s calibration method guarantees traceability to the national measuring standard.

CERTIFICATES

DIN EN 10 204Certificate of Compliance with the Standard 2.1

Werksbescheinigung 2.1Attestion de conformité à la norme 2.1

TEST SIEVE ANALYSENSIEB TAMIS DE CONTROLEDIN ISO 3310, NF ISO 3310, ISO 565, ASTM E11, BS 410

Aperture width / Nennweite / Ouverture w:

Manufactured in compliance with the quality assurance instructions according to ISO 9001. The test sieve tolerances

coincide with the standard of the test sieve label.

Hergestellt unter Einhaltung der Vorgaben für die Qualitätssicherung nach ISO 9001. Das Analysensieb

entspricht in seinen Toleranzen dem auf dem Typenschild genannten Standard.

Fabriqué en conformité avec les critères de la norme ISO 9001. Le tamis de contrôle répond aux critères de la norme figurant

sur la plaque.

Serial No. Date

Aperture width / Nennweite / Ouverture w:

Maintenance of Test SievesSee ISO 2591-1, DIN 66165, Part 1 and Part 2Test Sieves with apertures of 500 µm and smaller should be cleaned in an ultrasonic bath. After ultrasonic cleaning rinse the test sieve with clear water and blow out the sieve bottom with compressed air. Let the water drip for about 5 minutes and dry the test sieve at 80 - 100 °C max. for about 30 minutes.Remove any remaining particles from the surface of the mesh by tapping the test sieve frame slightly against a rubber or wooden pad. Never remove particles by brushing.

Behandlung von AnalysensiebenSiehe auch DIN 66165, Teil 1 und Teil 2 sowie ISO 2591-1 Analysensiebe mit Maschenweiten von 500 µm und feiner müssen im Ultraschallbad gereinigt werden. Nach dem Ultraschallbad mit klarem Wasser nachspülen und Siebboden mit Druckluft streifen-frei ausblasen, ca. 5 Minuten abtropfen und ca. 30 Minuten bei max. 80 -100 °C trocknen lassen.Noch vorhandene eingeklemmte Grenzkörner durch leichtes Klopfen des Analysensiebrahmens gegen eine Holz- oder Gummiunterlage entfernen. Keine Bürsten oder Pinsel benutzen.

Entretien des tamis de contrôleVoir ISO 2591-1 et DIN 66165, 1ère et 2ème partieLes tamis de contrôle ayant des ouvertures de maille inférieures à 500 µm doivent être nettoyés dans un bain à ultra-sons.Après nettoyage, il faut les rincer à l´eau claire et souffler de l´air comprimé sur toute la surface du tamis. Ensuite, égoutter pendant environ 5 minutes et laissez sécher environ 30 minutes à 80°-100°C. Si des particules sont restées coincées dans les mailles, il est possible de les déloger en frappant doucement le tamis contre un support en bois ou en caoutchouc. Ne jamais utiliser de brosse ou de pinceau dans ce but.

1.

Standard Certificate of Compliance 2.1

The metal cloth for test sieves and the test

sieve itself are manufactured to current

standards. Manufacturing is subject to our

quality assurance system certified

according to EN ISO 9001-2000.

Each VWR test sieve is delivered with a

Certificate of Compliance with Order 2.1

according to EN 10204 as standard.

2. Optional Inspection Certificate or Calibration Certificate 3.1

VWR test sieves can be supplied with an Inspection Certificate or Calibration Certificate

3.1 according to EN 10204 with measuring results of a specific test.

Both methods carry out measurement in warp and weft direction. They differ in the

quantity of the measured aperture widths, resulting in different confidence levels.

During a ‘calibration’ three times as many aperture widths are measured compared to

during a ‘certification’. In general the test sieve is subject to a specific inspection.

Aperture widths are stated for warp and weft direction. The results are recorded for

further control measurements.

11VWR FOR SIEVING | VWR

Test sievesFrame: Stainless steel; woven wire cloth: Stainless steel, ISO 3310, ASTM E11, BS 410, AFNOR

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.50 25 0,020 1 510-184750 25 0,025 1 510-184650 25 0,032 1 510-184550 25 0,036 1 510-184450 25 0,038 1 510-184350 25 0,040 1 510-184250 25 0,045 1 510-184150 25 0,050 1 510-184050 25 0,053 1 510-183950 25 0,056 1 510-183850 25 0,063 1 510-183750 25 0,071 1 510-183650 25 0,075 1 510-183550 25 0,080 1 510-183450 25 0,090 1 510-183350 25 0,100 1 510-183250 25 0,106 1 510-183150 25 0,112 1 510-183050 25 0,125 1 510-182950 25 0,140 1 510-182850 25 0,150 1 510-182750 25 0,160 1 510-182650 25 0,180 1 510-182550 25 0,200 1 510-182450 25 0,216 1 510-182350 25 0,224 1 510-182250 25 0,250 1 510-182150 25 0,280 1 510-1820

Test sieves, 50×25 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.50 25 0,300 1 510-181950 25 0,315 1 510-181850 25 0,355 1 510-181750 25 0,400 1 510-181650 25 0,425 1 510-181550 25 0,450 1 510-181450 25 0,500 1 510-181350 25 0,560 1 510-181250 25 0,600 1 510-181150 25 0,630 1 510-181050 25 0,710 1 510-180950 25 0,800 1 510-180850 25 0,850 1 510-180750 25 0,900 1 510-180650 25 1,000 1 510-180550 25 1,120 1 510-180450 25 1,180 1 510-180350 25 1,250 1 510-180250 25 1,400 1 510-180150 25 1,600 1 510-180050 25 1,700 1 510-179950 25 1,800 1 510-179850 25 2,000 1 510-179750 25 2,240 1 510-179650 25 2,360 1 510-179550 25 2,500 1 510-179450 25 2,800 1 510-179350 25 4,000 1 510-1792

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.76 22 0,020 1 510-361176 22 0,025 1 510-361276 22 0,032 1 510-361376 22 0,036 1 510-361476 22 0,038 1 510-361576 22 0,040 1 510-361676 22 0,045 1 510-361776 22 0,050 1 510-361876 22 0,053 1 510-361976 22 0,056 1 510-362076 22 0,063 1 510-362176 22 0,071 1 510-362276 22 0,075 1 510-362376 22 0,080 1 510-3624

Test sieves, 76×22 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.76 22 0,090 1 510-362576 22 0,100 1 510-362676 22 0,106 1 510-362776 22 0,112 1 510-362876 22 0,125 1 510-362976 22 0,140 1 510-363076 22 0,150 1 510-363176 22 0,160 1 510-363276 22 0,180 1 510-363376 22 0,200 1 510-363476 22 0,212 1 510-363576 22 0,224 1 510-363676 22 0,250 1 510-363776 22 0,280 1 510-3638

Delivery information: Supplied as standard with a certificate of compliance 2.1 according to DIN EN 10204.

Optional: Inspection certificate of calibration 3.1 according to DIN EN 10204 with measuring results of a specific test.

Sieves and accessories of other dimensions are available on request. Please go to www.vwr.com for a full overview.

All sieves are supplied with serial number and a certificate of compliance with the order 2.1 according to DIN EN 10204. Further certificates and calibration services are available. Contact your local VWR sales office for further details.

12 VWR | VWR FOR SIEVING

Test sieves

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesSieve cover 76 - 1 510-3662Sieve pan 76 22 1 510-3663Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1237Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1240

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.100 45 0,020 1 510-0500100 45 0,025 1 510-0501100 45 0,032 1 510-0502100 45 0,036 1 510-0503100 45 0,038 1 510-0504100 45 0,040 1 510-0505100 45 0,045 1 510-0506100 45 0,050 1 510-0507100 45 0,053 1 510-0508100 45 0,056 1 510-0509100 45 0,063 1 510-0510100 45 0,071 1 510-0511100 45 0,075 1 510-0512100 45 0,080 1 510-0513100 45 0,090 1 510-0514100 45 0,100 1 510-0515100 45 0,106 1 510-0516100 45 0,112 1 510-0517100 45 0,125 1 510-0518100 45 0,140 1 510-0519100 45 0,150 1 510-0520100 45 0,160 1 510-0521100 45 0,180 1 510-0522100 45 0,200 1 510-0523100 45 0,212 1 510-0524100 45 0,224 1 510-0525100 45 0,250 1 510-0526

Test sieves, 100×45 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.100 45 0,280 1 510-0527100 45 0,300 1 510-0528100 45 0,315 1 510-0529100 45 0,355 1 510-0530100 45 0,400 1 510-0531100 45 0,425 1 510-0532100 45 0,450 1 510-0533100 45 0,500 1 510-0534100 45 0,560 1 510-0535100 45 0,600 1 510-0536100 45 0,630 1 510-0537100 45 0,710 1 510-0538100 45 0,800 1 510-0539100 45 0,850 1 510-0540100 45 0,900 1 510-0541100 45 1,00 1 510-0542100 45 1,12 1 510-0543100 45 1,18 1 510-0544100 45 1,25 1 510-0545100 45 1,40 1 510-0546100 45 1,60 1 510-0547100 45 1,70 1 510-0548100 45 1,80 1 510-0549100 45 2,00 1 510-0550100 45 2,24 1 510-0551100 45 2,36 1 510-0552100 45 2,50 1 510-0553

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.76 22 0,300 1 510-363976 22 0,315 1 510-381676 22 0,355 1 510-364076 22 0,400 1 510-364176 22 0,425 1 510-364276 22 0,450 1 510-364376 22 0,500 1 510-364476 22 0,560 1 510-364576 22 0,600 1 510-364676 22 0,630 1 510-364776 22 0,710 1 510-364876 22 0,800 1 510-364976 22 0,850 1 510-3815

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.76 22 0,900 1 510-381476 22 1,00 1 510-365076 22 1,12 1 510-365176 22 1,18 1 510-365276 22 1,25 1 510-365376 22 1,40 1 510-365476 22 1,60 1 510-365576 22 1,70 1 510-365676 22 1,80 1 510-365776 22 2,00 1 510-365876 22 2,24 1 510-365976 22 2,36 1 510-366076 22 2,50 1 510-3661

Test sieves, 76×22 mm

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesSealing ring, PVC 100 - 1 510-3666Sieve cover 100 - 1 510-3664Sieve pan 100 30 1 510-3665Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1237Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1240

Test sieves, 150×50 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.150 50 0,020 1 510-0554150 50 0,025 1 510-0555150 50 0,032 1 510-0556150 50 0,036 1 510-0557150 50 0,038 1 510-0558150 50 0,040 1 510-0559150 50 0,045 1 510-0560150 50 0,050 1 510-0561150 50 0,053 1 510-0562150 50 0,056 1 510-0563150 50 0,063 1 510-0564

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.150 50 0,071 1 510-0565150 50 0,075 1 510-0566150 50 0,080 1 510-0567150 50 0,090 1 510-0568150 50 0,100 1 510-0569150 50 0,106 1 510-0570150 50 0,112 1 510-0571150 50 0,125 1 510-0572150 50 0,140 1 510-0573150 50 0,150 1 510-0574150 50 0,160 1 510-0575


Test sieves


Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesSealing ring, PVC 150 - 1 510-3671Sieve cover 150 - 1 510-3669Sieve pan 150 50 1 510-3670Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1237Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1240

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.200 32 0,020 1 510-0608200 32 0,025 1 510-0609200 32 0,032 1 510-0610200 32 0,036 1 510-0611200 32 0,038 1 510-0612200 32 0,040 1 510-0613200 32 0,045 1 510-0614200 32 0,050 1 510-0615200 32 0,053 1 510-0616200 32 0,056 1 510-0617200 32 0,063 1 510-0618200 32 0,071 1 510-0619200 32 0,075 1 510-0620200 32 0,080 1 510-0621200 32 0,090 1 510-0622200 32 0,100 1 510-0623200 32 0,106 1 510-0624200 32 0,112 1 510-0625200 32 0,125 1 510-0626200 32 0,140 1 510-0627200 32 0,150 1 510-0628200 32 0,160 1 510-0629200 32 0,180 1 510-0630200 32 0,200 1 510-0631200 32 0,212 1 510-0632200 32 0,224 1 510-0633200 32 0,250 1 510-0634200 32 0,280 1 510-0635200 32 0,300 1 510-0636200 32 0,315 1 510-0637200 32 0,355 1 510-0638200 32 0,400 1 510-0639200 32 0,425 1 510-0640200 32 0,450 1 510-0641200 32 0,500 1 510-0642200 32 0,560 1 510-0643

Test sieves, 200×32 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.200 32 0,600 1 510-0644200 32 0,630 1 510-0645200 32 0,710 1 510-0646200 32 0,800 1 510-0647200 32 0,850 1 510-0648200 32 0,900 1 510-0649200 32 1,00 1 510-0650200 32 1,12 1 510-0651200 32 1,18 1 510-0652200 32 1,25 1 510-0653200 32 1,40 1 510-0654200 32 1,60 1 510-0655200 32 1,70 1 510-0656200 32 1,80 1 510-0657200 32 2,00 1 510-0658200 32 2,24 1 510-0659200 32 2,36 1 510-0660200 32 2,50 1 510-0661200 32 2,80 1 510-0662200 32 3,15 1 510-0663200 32 3,35 1 510-0664200 32 3,55 1 510-0665200 32 4,00 1 510-0666200 32 4,50 1 510-0667200 32 4,75 1 510-0668200 32 5,00 1 510-0669200 32 5,60 1 510-0670200 32 6,30 1 510-0671200 32 6,70 1 510-0672200 32 7,10 1 510-0673200 32 8,00 1 510-0674200 32 9,00 1 510-0675200 32 9,50 1 510-0676200 32 10,00 1 510-0677200 32 11,20 1 510-0678

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.150 50 0,180 1 510-0576150 50 0,200 1 510-0577150 50 0,212 1 510-0578150 50 0,224 1 510-0579150 50 0,250 1 510-0580150 50 0,280 1 510-0581150 50 0,300 1 510-0582150 50 0,315 1 510-0583150 50 0,355 1 510-0584150 50 0,400 1 510-0585150 50 0,425 1 510-0586150 50 0,450 1 510-0587150 50 0,500 1 510-0588150 50 0,560 1 510-0589150 50 0,600 1 510-0590150 50 0,630 1 510-0591

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.150 50 0,710 1 510-0592150 50 0,800 1 510-0593150 50 0,850 1 510-0594150 50 0,900 1 510-0595150 50 1,00 1 510-0596150 50 1,12 1 510-0597150 50 1,18 1 510-0598150 50 1,25 1 510-0599150 50 1,40 1 510-0600150 50 1,60 1 510-0601150 50 1,70 1 510-0602150 50 1,80 1 510-0603150 50 2,00 1 510-0604150 50 2,24 1 510-0605150 50 2,36 1 510-0606150 50 2,50 1 510-0607

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate pan (sieve frame with solid base) 200 32 1 510-3677Intermediate ring (sieve frame without base) 200 32 1 510-3679Sealing ring, PVC 200 - 203 - 1 510-3680Sealing ring, Viton (-15 up to +200 °C) 200 - 203 - 1 510-3681Sieve cover 200 - 1 510-3672Sieve pan 200 32 1 510-3674Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1237Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1240


Test sieves

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.200 50 2,00 1 510-0750200 50 2,24 1 510-0751200 50 2,36 1 510-0752200 50 2,50 1 510-0753200 50 2,80 1 510-0754200 50 3,15 1 510-0755200 50 3,35 1 510-0756200 50 3,55 1 510-0757200 50 4,00 1 510-0758200 50 4,50 1 510-0759200 50 4,75 1 510-0760200 50 5,00 1 510-0761200 50 5,60 1 510-0762200 50 6,30 1 510-0763200 50 6,70 1 510-0764200 50 7,10 1 510-0765200 50 8,00 1 510-0766200 50 9,00 1 510-0767200 50 9,50 1 510-0768200 50 10,00 1 510-0769200 50 11,20 1 510-0770200 50 12,50 1 510-0771200 50 13,20 1 510-0772200 50 14,00 1 510-0773200 50 16,00 1 510-0774200 50 18,00 1 510-0775200 50 19,00 1 510-0776200 50 20,00 1 510-0777200 50 22,40 1 510-0778200 50 25,00 1 510-0779200 50 26,50 1 510-0780200 50 28,00 1 510-0781200 50 31,50 1 510-0782200 50 35,50 1 510-0783200 50 37,50 1 510-0784200 50 40,00 1 510-0785200 50 45,00 1 510-0786200 50 50,00 1 510-0787200 50 53,00 1 510-0788200 50 56,00 1 510-0789200 50 63,00 1 510-0790200 50 71,00 1 510-0791200 50 75,00 1 510-0792200 50 80,00 1 510-0793200 50 90,00 1 510-0794200 50 100,00 1 510-0795200 50 106,00 1 510-0796200 50 112,00 1 510-0797200 50 125,00 1 510-0798

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.200 50 0,020 1 510-0700200 50 0,025 1 510-0701200 50 0,032 1 510-0702200 50 0,036 1 510-0703200 50 0,038 1 510-0704200 50 0,040 1 510-0705200 50 0,045 1 510-0706200 50 0,050 1 510-0707200 50 0,053 1 510-0708200 50 0,056 1 510-0709200 50 0,063 1 510-0710200 50 0,071 1 510-0711200 50 0,075 1 510-0712200 50 0,080 1 510-0713200 50 0,090 1 510-0714200 50 0,100 1 510-0715200 50 0,106 1 510-0716200 50 0,112 1 510-0717200 50 0,125 1 510-0718200 50 0,140 1 510-0719200 50 0,150 1 510-0720200 50 0,160 1 510-0721200 50 0,180 1 510-0722200 50 0,200 1 510-0723200 50 0,212 1 510-0724200 50 0,224 1 510-0725200 50 0,250 1 510-0726200 50 0,280 1 510-0727200 50 0,300 1 510-0728200 50 0,315 1 510-0729200 50 0,355 1 510-0730200 50 0,400 1 510-0731200 50 0,425 1 510-0732200 50 0,450 1 510-0733200 50 0,500 1 510-0734200 50 0,560 1 510-0735200 50 0,600 1 510-0736200 50 0,630 1 510-0737200 50 0,710 1 510-0738200 50 0,800 1 510-0739200 50 0,850 1 510-0740200 50 0,900 1 510-0741200 50 1,00 1 510-0742200 50 1,12 1 510-0743200 50 1,18 1 510-0744200 50 1,25 1 510-0745200 50 1,40 1 510-0746200 50 1,60 1 510-0747200 50 1,70 1 510-0748200 50 1,80 1 510-0749

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate pan (sieve frame with solid base) 200 50 1 510-3676Intermediate ring (sieve frame without base) 200 50 1 510-3678Sealing ring, PVC 200 - 203 - 1 510-3680Sealing ring, Viton (-15 up to +200 °C) 200 - 203 - 1 510-3681Sieve cover 200 - 1 510-3672Sieve pan 200 50 1 510-3673Sieve pan with discharge nozzle 200 50 1 510-3675Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1237Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1240



Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 32 0,020 1 510-0840203 32 0,025 1 510-0841203 32 0,032 1 510-0842203 32 0,036 1 510-0843203 32 0,038 1 510-0844203 32 0,040 1 510-0845203 32 0,045 1 510-0846203 32 0,050 1 510-0847203 32 0,053 1 510-0848203 32 0,056 1 510-0849203 32 0,063 1 510-0850203 32 0,071 1 510-0851203 32 0,075 1 510-0852203 32 0,080 1 510-0853203 32 0,090 1 510-0854203 32 0,100 1 510-0855203 32 0,106 1 510-0856203 32 0,112 1 510-0857203 32 0,125 1 510-0858203 32 0,140 1 510-0859203 32 0,150 1 510-0860203 32 0,160 1 510-0861203 32 0,180 1 510-0862203 32 0,200 1 510-0863203 32 0,212 1 510-0864203 32 0,224 1 510-0865203 32 0,250 1 510-0866203 32 0,280 1 510-0867203 32 0,300 1 510-0868203 32 0,315 1 510-0869203 32 0,355 1 510-0870203 32 0,400 1 510-0871203 32 0,425 1 510-0872203 32 0,450 1 510-0873203 32 0,500 1 510-0874203 32 0,560 1 510-0875

Test sieves, 203×32 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 32 0,600 1 510-0876203 32 0,630 1 510-0877203 32 0,710 1 510-0878203 32 0,800 1 510-0879203 32 0,850 1 510-0880203 32 0,900 1 510-0881203 32 1,00 1 510-0882203 32 1,12 1 510-0883203 32 1,18 1 510-0884203 32 1,25 1 510-0885203 32 1,40 1 510-0886203 32 1,60 1 510-0887203 32 1,70 1 510-0888203 32 1,80 1 510-0889203 32 2,00 1 510-0890203 32 2,24 1 510-0891203 32 2,36 1 510-0892203 32 2,50 1 510-0893203 32 2,80 1 510-0894203 32 3,15 1 510-0895203 32 3,35 1 510-0896203 32 3,55 1 510-0897203 32 4,00 1 510-0898203 32 4,50 1 510-0899203 32 4,75 1 510-0900203 32 5,00 1 510-0901203 32 5,60 1 510-0902203 32 6,30 1 510-0903203 32 6,70 1 510-0904203 32 7,10 1 510-0905203 32 8,00 1 510-0906203 32 9,00 1 510-0907203 32 9,50 1 510-0908203 32 10,00 1 510-0909203 32 11,20 1 510-0910

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate pan (sieve frame with solid base) 203 32 1 510-3687Intermediate ring (sieve frame without base) 203 32 1 510-3689Sealing ring, PVC 200 - 203 - 1 510-3680Sealing ring, Viton (-15 up to +200 °C) 200 - 203 - 1 510-3681Sieve cover 203 - 1 510-3682Sieve pan 203 32 1 510-3684Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1237Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 203 mm - - 1 510-1240


Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 50 0,020 1 510-0911203 50 0,025 1 510-0912203 50 0,032 1 510-0913203 50 0,036 1 510-0914203 50 0,038 1 510-0915203 50 0,040 1 510-0916203 50 0,045 1 510-0917203 50 0,050 1 510-0918203 50 0,053 1 510-0919203 50 0,056 1 510-0920203 50 0,063 1 510-0921203 50 0,071 1 510-0922203 50 0,075 1 510-0923203 50 0,080 1 510-0924203 50 0,090 1 510-0925203 50 0,100 1 510-0926203 50 0,106 1 510-0927203 50 0,112 1 510-0928203 50 0,125 1 510-0929203 50 0,140 1 510-0930203 50 0,150 1 510-0931203 50 0,160 1 510-0932

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 50 0,180 1 510-0933203 50 0,200 1 510-0934203 50 0,212 1 510-0935203 50 0,224 1 510-0936203 50 0,250 1 510-0937203 50 0,280 1 510-0938203 50 0,300 1 510-0939203 50 0,315 1 510-0940203 50 0,355 1 510-2500203 50 0,400 1 510-2501203 50 0,425 1 510-2502203 50 0,450 1 510-2503203 50 0,500 1 510-2504203 50 0,560 1 510-2505203 50 0,600 1 510-2506203 50 0,630 1 510-2507203 50 0,710 1 510-2508203 50 0,800 1 510-2509203 50 0,850 1 510-2510203 50 0,900 1 510-2511203 50 1,00 1 510-2512203 50 1,12 1 510-2513


Test sieves

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 50 13,20 1 510-2542203 50 14,00 1 510-2543203 50 16,00 1 510-2544203 50 18,00 1 510-2545203 50 19,00 1 510-2546203 50 20,00 1 510-2547203 50 22,40 1 510-2548203 50 25,00 1 510-2549203 50 26,50 1 510-2550203 50 28,00 1 510-2551203 50 31,50 1 510-2552203 50 35,50 1 510-2553203 50 37,50 1 510-2554203 50 40,00 1 510-2555203 50 45,00 1 510-2556203 50 50,00 1 510-2557203 50 53,00 1 510-2558203 50 56,00 1 510-2559203 50 63,00 1 510-2560203 50 71,00 1 510-2561203 50 75,00 1 510-2562203 50 80,00 1 510-2563203 50 90,00 1 510-2564203 50 100,00 1 510-2565203 50 106,00 1 510-2566203 50 112,00 1 510-2567203 50 125,00 1 510-2568

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 50 1,18 1 510-2514203 50 1,25 1 510-2515203 50 1,40 1 510-2516203 50 1,60 1 510-2517203 50 1,70 1 510-2518203 50 1,80 1 510-2519203 50 2,00 1 510-2520203 50 2,24 1 510-2521203 50 2,36 1 510-2522203 50 2,50 1 510-2523203 50 2,80 1 510-2524203 50 3,15 1 510-2525203 50 3,35 1 510-2526203 50 3,55 1 510-2527203 50 4,00 1 510-2528203 50 4,50 1 510-2529203 50 4,75 1 510-2530203 50 5,00 1 510-2531203 50 5,60 1 510-2532203 50 6,30 1 510-2533203 50 6,70 1 510-2534203 50 7,10 1 510-2535203 50 8,00 1 510-2536203 50 9,00 1 510-2537203 50 9,50 1 510-2538203 50 10,00 1 510-2539203 50 11,20 1 510-2540203 50 12,50 1 510-2541



Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.250 55 0,020 1 510-3715250 55 0,025 1 510-3716250 55 0,032 1 510-3717250 55 0,036 1 510-3718250 55 0,038 1 510-3719250 55 0,040 1 510-3720250 55 0,045 1 510-3721250 55 0,050 1 510-3722250 55 0,053 1 510-3723250 55 0,056 1 510-3724250 55 0,063 1 510-3725250 55 0,071 1 510-3726250 55 0,075 1 510-3727250 55 0,080 1 510-3728250 55 0,090 1 510-3729250 55 0,100 1 510-3730250 55 0,106 1 510-3731250 55 0,112 1 510-3732250 55 0,125 1 510-3733250 55 0,140 1 510-3734250 55 0,150 1 510-3735250 55 0,160 1 510-3736250 55 0,180 1 510-3737250 55 0,200 1 510-3738250 55 0,212 1 510-3739250 55 0,224 1 510-3740250 55 0,250 1 510-3741250 55 0,280 1 510-3742250 55 0,300 1 510-3743

Test sieves, 250×55 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.250 55 0,315 1 510-3744250 55 0,355 1 510-3745250 55 0,400 1 510-3746250 55 0,425 1 510-3747250 55 0,450 1 510-3748250 55 0,500 1 510-3749250 55 0,560 1 510-3750250 55 0,600 1 510-3751250 55 0,630 1 510-3752250 55 0,710 1 510-3753250 55 0,800 1 510-3754250 55 0,850 1 510-3755250 55 0,900 1 510-3756250 55 1,00 1 510-3757250 55 1,12 1 510-3758250 55 1,18 1 510-3759250 55 1,25 1 510-3760250 55 1,40 1 510-3761250 55 1,60 1 510-3762250 55 1,70 1 510-3763250 55 1,80 1 510-3764250 55 2,00 1 510-3765250 55 2,24 1 510-3766250 55 2,36 1 510-3767250 55 2,50 1 510-3768250 55 2,80 1 510-3769250 55 3,15 1 510-3770250 55 3,35 1 510-3771250 55 3,55 1 510-3772


Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.250 55 4,00 1 510-3773250 55 4,50 1 510-3774250 55 4,75 1 510-3775250 55 5,00 1 510-3776250 55 5,60 1 510-3777250 55 6,30 1 510-3778250 55 6,70 1 510-3779250 55 7,10 1 510-3780250 55 8,00 1 510-3781250 55 9,00 1 510-3782250 55 9,50 1 510-3783250 55 10,00 1 510-3784250 55 11,20 1 510-3785250 55 12,50 1 510-3786250 55 13,20 1 510-3787250 55 14,00 1 510-3788250 55 16,00 1 510-3789250 55 18,00 1 510-3790250 55 19,00 1 510-3791250 55 20,00 1 510-3792250 55 22,40 1 510-3793

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.250 55 25,00 1 510-3794250 55 26,50 1 510-3795250 55 28,00 1 510-3796250 55 31,50 1 510-3797250 55 35,50 1 510-3798250 55 37,50 1 510-3799250 55 40,00 1 510-3800250 55 45,00 1 510-3801250 55 50,00 1 510-3802250 55 53,00 1 510-3803250 55 56,00 1 510-3804250 55 63,00 1 510-3805250 55 71,00 1 510-3806250 55 75,00 1 510-3807250 55 80,00 1 510-3808250 55 90,00 1 510-3809250 55 100,00 1 510-3810250 55 106,00 1 510-3811250 55 112,00 1 510-3812250 55 125,00 1 510-3813


Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate ring (sieve frame without base) 250 55 1 510-1232Sieve cover 250 - 1 510-1229Sieve pan 250 55 1 510-1230Sieve pan with discharge nozzle 250 50 1 510-1231Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 315 mm - - 1 510-1238Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 315 mm - - 1 510-1241

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.300 30 0,038 1 510-2590300 30 0,040 1 510-2591300 30 0,045 1 510-2592300 30 0,050 1 510-2593300 30 0,053 1 510-2594300 30 0,056 1 510-2595300 30 0,063 1 510-2596300 30 0,071 1 510-2597300 30 0,075 1 510-2598300 30 0,080 1 510-2599300 30 0,090 1 510-2600300 30 0,100 1 510-2601300 30 0,106 1 510-2602300 30 0,112 1 510-2603300 30 0,125 1 510-2604300 30 0,140 1 510-2605300 30 0,150 1 510-2606300 30 0,160 1 510-2607300 30 0,180 1 510-2608300 30 0,200 1 510-2609300 30 0,212 1 510-2610300 30 0,224 1 510-2611300 30 0,250 1 510-2612300 30 0,280 1 510-2613300 30 0,300 1 510-2614300 30 0,315 1 510-2615300 30 0,315 1 510-2616300 30 0,400 1 510-2617300 30 0,425 1 510-2618300 30 0,450 1 510-2619

Test sieves, 300×30 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.300 30 0,500 1 510-2620300 30 0,560 1 510-2621300 30 0,600 1 510-2622300 30 0,630 1 510-2623300 30 0,710 1 510-2624300 30 0,800 1 510-2625300 30 0,850 1 510-2626300 30 0,900 1 510-2627300 30 1,00 1 510-2628300 30 1,12 1 510-2629300 30 1,18 1 510-2630300 30 1,25 1 510-2631300 30 1,40 1 510-2632300 30 1,60 1 510-2633300 30 1,70 1 510-2634300 30 1,80 1 510-2635300 30 2,00 1 510-2636300 30 2,24 1 510-2637300 30 2,36 1 510-2638300 30 2,50 1 510-2639300 30 2,80 1 510-2640300 30 3,15 1 510-2641300 30 3,35 1 510-2642300 30 3,55 1 510-2643300 30 4,00 1 510-2644300 30 4,50 1 510-2645300 30 4,75 1 510-2646300 30 5,00 1 510-2647300 30 5,60 1 510-2648

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate ring (sieve frame without base) 300 30 1 510-3695Sealing ring, PVC 300 - 305 - 1 510-3696Sealing ring, Viton (-15 up to +200 °C) 300 - 305 - 1 510-3697Sieve cover 300 - 1 510-3690Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 315 mm - - 1 510-1238Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 315 mm - - 1 510-1241


Test sieves











Test sieves









Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate ring (sieve frame without base) 350 60 1 510-3705Sealing ring, PVC 350 - 1 510-3706Sealing ring, Viton (-15 up to +200 °C) 350 - 1 510-3707Sieve cover 350 - 1 510-3702Sieve pan 350 60 1 510-3703Sieve pan with discharge nozzle 350 60 1 510-3704Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 400 mm - - 1 510-1239Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 400 mm - - 1 510-1242


Test sieves


Test sieves, 400×65 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.400 65 2,00 1 510-3521400 65 2,24 1 510-3522400 65 2,36 1 510-3523400 65 2,50 1 510-3524400 65 2,80 1 510-3525400 65 3,15 1 510-3526400 65 3,35 1 510-3527400 65 3,55 1 510-3528400 65 4,00 1 510-3529400 65 4,50 1 510-3530400 65 4,75 1 510-3531400 65 5,00 1 510-3532400 65 5,60 1 510-3533400 65 6,30 1 510-3534400 65 6,70 1 510-3535400 65 7,10 1 510-3536400 65 8,00 1 510-3537400 65 9,00 1 510-3538400 65 9,50 1 510-3539400 65 10,00 1 510-3540400 65 11,20 1 510-3541400 65 12,50 1 510-3542400 65 13,20 1 510-3543400 65 14,00 1 510-3544400 65 16,00 1 510-3545400 65 18,00 1 510-3546400 65 19,00 1 510-3547400 65 20,00 1 510-3548400 65 22,40 1 510-3549400 65 25,00 1 510-3550400 65 26,50 1 510-3551400 65 28,00 1 510-3552400 65 31,50 1 510-3553400 65 35,50 1 510-3554400 65 37,50 1 510-3555400 65 40,00 1 510-3556400 65 45,00 1 510-3557400 65 50,00 1 510-3558400 65 53,00 1 510-3559400 65 56,00 1 510-3560400 65 63,00 1 510-3561400 65 71,00 1 510-3562400 65 75,00 1 510-3563400 65 80,00 1 510-3564400 65 90,00 1 510-3565400 65 100,00 1 510-3566400 65 106,00 1 510-3567400 65 112,00 1 510-3568400 65 125,00 1 510-3569

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesIntermediate pan (sieve frame with solid base) 400 60 1 510-3711Intermediate ring (sieve frame without base) 400 60 1 510-3712Sealing ring, PVC 400 - 1 510-3713Sealing ring, Viton (-15 up to +200 °C) 400 - 1 510-3714Sieve cover 400 - 1 510-3708Sieve pan 400 65 1 510-3709Sieve pan with discharge nozzle 400 65 1 510-3710Calibration certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 400 mm - - 1 510-1239Inspection certificate 3.1 according to EN 10204 (together with initial order of sieve). Up to 400 mm - - 1 510-1242


Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.450 70 0,032 1 510-1781450 70 0,036 1 510-1780450 70 0,038 1 510-1779450 70 0,040 1 510-1778450 70 0,045 1 510-1777450 70 0,050 1 510-1776450 70 0,053 1 510-1775450 70 0,056 1 510-1774450 70 0,063 1 510-1773450 70 0,071 1 510-1772450 70 0,075 1 510-1771450 70 0,080 1 510-1770450 70 0,090 1 510-1769450 70 0,100 1 510-1768450 70 0,106 1 510-1767450 70 0,112 1 510-1766450 70 0,125 1 510-1765450 70 0,140 1 510-1764450 70 0,150 1 510-1763450 70 0,160 1 510-1762450 70 0,180 1 510-1761450 70 0,200 1 510-1760450 70 0,212 1 510-1759450 70 0,224 1 510-1758450 70 0,250 1 510-1757450 70 0,280 1 510-1756450 70 0,300 1 510-1755450 70 0,315 1 510-1754450 70 0,355 1 510-1753450 70 0,400 1 510-1752450 70 0,425 1 510-1751450 70 0,450 1 510-1750450 70 0,500 1 510-1749450 70 0,560 1 510-1748450 70 0,600 1 510-1747450 70 0,630 1 510-1746450 70 0,710 1 510-1745450 70 0,800 1 510-1744450 70 0,850 1 510-1743450 70 0,900 1 510-1742450 70 1,00 1 510-1741

Test sieves, 450×70 mmØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.450 70 1,12 1 510-1740450 70 1,18 1 510-1739450 70 1,25 1 510-1738450 70 1,40 1 510-1737450 70 1,60 1 510-1736450 70 1,70 1 510-1735450 70 1,80 1 510-1734450 70 2,00 1 510-1733450 70 2,24 1 510-1732450 70 2,36 1 510-1731450 70 2,50 1 510-1730450 70 2,80 1 510-1729450 70 3,15 1 510-1728450 70 3,35 1 510-1727450 70 3,55 1 510-1726450 70 4,00 1 510-1725450 70 16,00 1 510-1709450 70 18,00 1 510-1708450 70 19,00 1 510-1707450 70 20,00 1 510-1706450 70 22,40 1 510-1705450 70 25,00 1 510-1704450 70 26,50 1 510-1703450 70 28,00 1 510-1702450 70 31,50 1 510-1701450 70 35,50 1 510-1700450 70 37,50 1 510-1699450 70 40,00 1 510-1698450 70 45,00 1 510-1697450 70 50,00 1 510-1696450 70 53,00 1 510-1695450 70 56,00 1 510-1694450 70 63,00 1 510-1693450 70 71,00 1 510-1692450 70 75,00 1 510-1691450 70 80,00 1 510-1690450 70 90,00 1 510-1689450 70 100,00 1 510-1688450 70 106,00 1 510-1687450 70 112,00 1 510-1686450 70 125,00 1 510-1685

Description Ø (mm) Height (mm) Pk Cat. No.AccessoriesSieve cover 450 - 1 510-1782Sieve pan 450 70 1 510-1783Sieve pan with discharge nozzle 450 70 1 510-1784


Test sieves

Test sieves with square holesFrame: Stainless steel; perforated plates: Galvanised steel, ISO 3310-2, ASTM E323, BS 410, AFNOR


Test sieves, 200×32 mm, with square holes

Delivery information: Supplied as standard with a certificate of compliance 2.1 according to DIN EN 10204.

Optional: Inspection certificate of calibration 3.1 according to DIN EN 10204 with measuring results of a specific test.

Sieves and accessories of other dimensions are available on request. Please go to www.vwr.com for a full overview.

All sieves are supplied with serial number and a certificate of compliance with the order 2.1 according to DIN EN 10204. Further certificates and calibration services are available. Contact your local VWR sales office for further details.

Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.200 32 10,00 1 510-0690200 32 11,20 1 510-0691200 32 12,50 1 510-0692200 32 13,20 1 510-0693200 32 14,00 1 510-0694200 32 16,00 1 510-0695200 32 18,00 1 510-0696200 32 19,00 1 510-0697200 32 20,00 1 510-0698200 32 22,40 1 510-0699


Test sieves, 200×50 mm, with square holesØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.200 50 25,00 1 510-0820200 50 26,50 1 510-0821200 50 28,00 1 510-0822200 50 31,50 1 510-0823200 50 35,50 1 510-0824200 50 37,50 1 510-0825200 50 40,00 1 510-0826200 50 45,00 1 510-0827200 50 50,00 1 510-0828200 50 53,00 1 510-0829200 50 56,00 1 510-0830200 50 63,00 1 510-0831200 50 71,00 1 510-0832200 50 75,00 1 510-0833200 50 80,00 1 510-0834200 50 90,00 1 510-0835200 50 100,00 1 510-0836200 50 106,00 1 510-0837200 50 112,00 1 510-0838200 50 125,00 1 510-0839






Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.203 50 10,00 1 510-2580203 50 11,20 1 510-2581203 50 12,50 1 510-2582203 50 13,20 1 510-2583203 50 14,00 1 510-2584203 50 16,00 1 510-2585203 50 18,00 1 510-2586203 50 19,00 1 510-2587203 50 20,00 1 510-2588203 50 22,40 1 510-2589





Test sieves














Ø (mm) Height (mm) Mesh size (mm) Pk Cat. No.450 70 4,00 1 510-1684450 70 4,50 1 510-1683450 70 5,00 1 510-1682450 70 5,60 1 510-1681450 70 6,30 1 510-1680450 70 7,10 1 510-1679450 70 8,00 1 510-1678450 70 9,00 1 510-1677450 70 10,00 1 510-1676450 70 11,20 1 510-1675450 70 12,50 1 510-1674450 70 14,00 1 510-1673450 70 16,00 1 510-1672450 70 18,00 1 510-1671450 70 20,00 1 510-1670

Test sieves, 450×70 mm, with square holesØ (mm) Height (mm) Mesh size (mm) Pk Cat. No.450 70 22,40 1 510-1669450 70 25,00 1 510-1668450 70 31,50 1 510-1667450 70 35,50 1 510-1666450 70 40,00 1 510-1665450 70 45,00 1 510-1664450 70 50,00 1 510-1663450 70 56,00 1 510-1662450 70 63,00 1 510-1661450 70 71,00 1 510-1660450 70 80,00 1 510-1659450 70 90,00 1 510-1658450 70 100,00 1 510-1657450 70 112,00 1 510-1656450 70 125,00 1 510-1655


Useful accessories

Description Pk Cat. No.Star Beater 1 412-0167

Model Star BeaterMax. sample volume (ml) 2×50Vibrational frequency (Hz) 3 - 30Speed display LEDGrinding time setting (min) 5 s to 60 minPower consumption (W) 200 VAW×D×H (mm) 365×405×225Weight (kg) 42

Mixer mill, Star BeaterA ball mill for disintregration of small sample volumes that can also be used to shake/mix microtubes and microplates. Wide range of applications in different scientific fields from geology to biotechnology.

• Easy to use - simple knob and keypad to control frequency and timer• Easy to maintain - brushless DC motor• Large range of grinding jars and tube holders to suit the sample

requirements

Material Ø (mm) Nominal volume (ml) Sample volume (ml) Max. feed size (mm) Pk Cat. No.Grinding jarsStainless steel 1,5 0,5 1 2 412-0168Stainless steel 5 2 2 2 412-0169Stainless steel 10 4 4 2 412-0170Stainless steel 25 10 6 2 412-0171Stainless steel 25 10 6 2 412-0264Stainless steel 35 15 6 2 412-0172Stainless steel 50 20 8 2 412-0173Hardened steel 1,5 0,5 1 2 412-0174Hardened steel 5 2 2 2 412-0175Hardened steel 10 4 4 2 412-0176Hardened steel 25 10 6 2 412-0177Hardened steel 35 15 6 2 412-0178Hardened steel 50 20 8 2 412-0179Tungsten carbide 25 10 6 2 412-0261PTFE 50 20 8 2 412-0260Grinding ballsStainless steel 3 20 412-0201Stainless steel 5 20 412-0190Stainless steel 7 20 412-0202Stainless steel 10 1 412-0191Stainless steel 12 1 412-0192Stainless steel 20 5 412-0265Stainless steel 25 5 412-0193Hardened steel 3 20 412-0266Hardened steel 5 1 412-0186Hardened steel 7 20 412-0267Hardened steel 10 1 412-0187Hardened steel 12 1 412-0188Hardened steel 25 2 412-0189Tungsten carbide 3 20 412-0268Tungsten carbide 5 20 412-0269Tungsten carbide 7 20 412-0270Tungsten carbide 20 5 412-0271

Description Pk Cat. No.AccessoriesTube holder, PTFE for reaction vials, 12×0,2 ml tubes on each arm 1 412-0181Tube holder, PTFE for reaction vials, 12×2 ml tubes on each arm 2 412-0182Tube holder, PTFE for reaction vials, 6×2 ml tubes on each arm 2 412-0183Tube holder, PTFE for reaction vials, 6×2 ml tubes (screw cap) on each arm 2 412-0184Holder, PTFE, for up to 3 microplates or 1 deep well plates on each arm 2 412-0185Rack, PTFE, for 24x 1,5/2,0 ml tubes (with or without screw cap) 2 412-0199Dummy plate, PTFE, for replacing one microtitre plate in the rack 2 412-0200Rack , PTFE, 50 ml with 5 places for conical tubes 2 412-0212Set of spanners 1 SET 412-0180Holder for 15 ml falcon tubes 2 412-0263Holder for up to 3 microplates or 1 deep well plates on each arm 2 412-0272


Capacity (ml) W×D×H (mm) Colour Pk Cat. No.Standard7 46×46×8 Blue 500 611-91687 46×46×8 Black 500 611-91757 46×46×8 White 500 611-0093100 85×85×24 Blue 500 611-9169100 85×85×24 Black 500 611-9176100 85×85×24 White 500 611-0094250 140×140×22 Blue 500 611-9170250 140×140×22 Black 500 611-9177250 140×140×22 White 500 611-0095Anti-static7 46×46×8 Blue 500 611-31137 46×46×8 Black 500 611-91817 46×46×8 White 500 611-9178100 85×85×24 Blue 500 611-3114100 85×85×24 Black 500 611-9182100 85×85×24 White 500 611-9179250 140×140×22 Blue 500 611-3115250 140×140×22 Black 500 611-9183250 140×140×22 White 500 611-9180

Disposable weighing boatsPS, square

These flexible weighing boats, with smooth surfaces, enable accurate pour-out with minimal sample loss. They are biologically inert and resistant to dilute and weak acids, aqueous solutions, alcohols and bleaches. Ideal for use with microwaves, balances or moisture analysers.

• Shallow form with wide, flat bottom avoids tipping• Rounded corners simplify transfer• Temperature resistant up to +70 °C


Useful accessories

Description W×D×H (mm) Colour Pk Cat. No.FSC® Certified 35×35×15 White 500 611-3258FSC® Certified 35×35×15 Brown 500 611-3256FSC® Certified 45×45×15 White 500 611-3259FSC® Certified 45×45×15 Brown 500 611-3257FSC® Certified 92×92×25 White 250 611-3625FSC® Certified 92×92×25 Brown 250 611-3624

Weighing boats, paperVWR® paper weighing boats are a first in eco friendly laboratory consumables.

• Control contents like a polystyrene weighing boat making them easier to handle than standard, flat weighing paper

• Made of greaseproof paper that meets FDA 21 CFR 176.170, components of paper in contact with aqueous and fatty foods, with 2I CFR 176.180 and contact with dry foods

• Compatible with heat applications up to a maximum of 210 ºC

They are both Eco-In and Eco-Out.Eco-In because they are FSC® Certified. The papers used to manufacture our boats are made from responsibly forested wood products.Eco-Out because they are naturally biodegradable in the standard municipal waste stream.

Description Capacity (ml) I-Ø×H (mm) Pk Cat. No.Disposable smooth-walled aluminium weighing dishes Smooth-sided, flat bottom, multipurpose ‘utility’ dish. 30 57×16 100 611-3658Smooth-sided, flat bottom, multipurpose ‘utility’ dish. 80 70×16 100 611-1380Smooth-sided, flat bottom, multipurpose ‘utility’ dish. 140 103×19 100 611-3659Disposable aluminum weighing/drying pansWeighing pan, ideal for general purpose weighing and dispensing. Compatible with both open and enclosed balances with a small weighing area (70 - 95 mm).

40 70×6,3 50 611-1354

Weighing/drying pan, ideal for general purpose weighing, dispensing, storage and drying. Compatible with Mettler, Sartorius, AND, Denver Instruments.

60 102×7,9 50 611-1353

Flat-top balance pan. Compatible with Ohaus balances and moisture analysers or any flat top balance. 50 127×54,8 100 611-1350Disposable aluminium drying pans for solids/liquidsDrying pan for solids (compatible with Cenco moisture analyser). 30 110×9,5 25 611-1351Drying pan for liquids (compatible with Cenco moisture analyser). 50 110×7,9 25 611-1352

Disposable weighing and drying dishes or pans

611-1354, 611-1350 & 611-1353 611-1351 & 611-1352

611-1380, 611-3658 & 611-3659

Dishes and pans, made of aluminium.

• Compatible with most balances and dryers • Oil-free • Slightly tapered for easy stacking

Sturdy, disposable dishes and pans. Ideal for general purpose weighing, dispensing, storage and drying applications.


Length (mm) Capacity (ml) Pk Cat. No.127 2,5 100 231-0493170 10 100 231-0494

Sampling spoonsPS, white. These disposable spoons are produced in a cleanroom environment and gamma radiation sterilised. They are ideal for the sampling of powder, granules and pastes.

• Available in two different sizes: 2,5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon)

• Production, assembling and packaging according to cleanroom Class 7 (10 000)

• According to EU food and FDA guidelines• Individually packed, gamma radiation sterilised

Capacity (ml) Length (mm) Colour Pk Cat. No.50 160 White 100 231-0490150 216 White 100 231-0491

Sampling scoopsPS, white. These sterile scoops are ideal for the sampling of powder, granules and pastes.

• Production, assembling and packaging according to cleanroom Class 7 (10 000)

• According to EU food and FDA guidelines• Individually packed, gamma radiation sterilised

Thanks to the special handle construction, and the slightly angled edge, the scoop stands horizontally and can be laid down without the material trickling out.

Description Sterile Length (mm) Blade width (mm) Colour Pk Cat. No.Disposable Eco spatulas, biodegradable (EcoPure® additive)

- 140 7 Natural 300 231-0416

Spatulas, disposablePP. Multipurpose, robust, inexpensive tools for collecting, transferring and processing samples of chemical and biological materials.

• Resistant to dilute acids and alkalis • Reduce cross-contamination • Autoclavable• Compliant with FDA standards for applications involving contact with food

The innovative shape of these spatulas allows them to be used as a spatula, spoon, scoop, scraper, mixing rod or for wiping. Ideal for recovering samples that have been frozen in liquid nitrogen. The macro type disposable spatulas are 50% larger than standard disposable spatulas. The long shaft makes it easier to transfer material from larger containers.


Test sieve shakers, EML 200 seriesVWR by Haver & Boecker

The EML 200 series offers different types of units. All models are suitable for 50 to 203 mm Ø sieves, a maximum sample/batch load of 3 kg, have a cast aluminium housing and improved clamping system.

• Digital timer: 0 to 99 minutes or constant operation• All shakers have a cover with inspection glass

which allows samples to be viewed during sieving

EML 200 Pure units which are ideal for standard analysis:Feature two given regulated amplitudes to select from: Fine or coarseOperation in set intervals of 10 secondsClassic ‘eco’ clamping system

EML 200 Premium units are suitable for users requiring precise and reproducable sieve analyses:Extra quiet electromagnetic driveFreely selectable amplitudes up to 3 mmExtra large, easy to use display and simple logical operationDuring sieving the remaining sieving time is shown on the displayUp to 49 different sieving programs can be stored in the memoryOption of Classic or HAVER TwinNut® quick release clamping system

EML 200 Premium Remote models also offer wet sieving, features as Premium units.Integrated full cone nozzleSeparate controller which can be wall mounted

Ordering information: Acceptance test certificate 3.1 according to DIN EN 10204 and IQ/OQ documentation for are available as optional accessories for all models, for details please contact your local VWR sales office.

Description Application Pk Cat. No.EML200 Pure modelsEML 200 Pure with Classic ‘eco’ clamping system, EU-plug Dry sieving 1 VWRI550106EUEML200 Premium modelsEML 200 Premium with Classic clamping system, EU-plug Dry sieving 1 VWRI550109EUEML 200 Premium with HAVER TwinNut® quick clamping system, EU-plug Dry sieving 1 VWRI550108EUEML 200 Premium Remote modelsEML 200 Premium Remote with Classic clamping system, EU-plug Wet/dry sieving 1 VWRI550112EUEML 200 Premium Remote with HAVER TwinNut® quick clamping system, EU-plug Wet/dry sieving 1 VWRI550111EU

Description Application Pk Cat. No.AccessoriesKnurled nut for Classic ‘eco’ clamping system EML Pure 1 HAVE560275Guide rod for Classic ‘eco’ clamping system EML Pure 1 HAVE560276Full cone nozzle EML Premium Remote 1 HAVE560278Cover with inspection glass EML Premium and EML Pure 1 HAVE560283over with full cone nozzle and inspection glass EML Premium Remote (for wet sieving) 1 HAVE560285


Test sieve shakers and accessories

Test sieve shakers, EML digital plus VWR by Haver & Boecker

These electromagnetically-driven test sieve shakers are designed for sieve analysis with optimum three-dimensional sieving action. The self-re-adjusting amplitude, which uses permanent acceleration measurement of the whole sieve tower, balances the oscillation of the shaker and its stand. This guarantees that amplitude stays the same, irrespective of the feed quantity and the installation position.

• Memory for 10 test sieve parameter sets• Timer function: 0 - 99 minutes or continuous operation• Intermittent or continuous shaking operation• Digital display of all functions• 3000 impulses per minute (50 Hertz)• Sound emission: ≤70 dB(A) for EML 315 digital plus, EML 450 digital

plus: 73 dB(A)• Maximum loading: 21 kg for EML 315 (6 kg sieved material), 42 kg

for EML 450 (15 kg sieved material)

EML 315 and 450 models are for dry and wet sieving and have a separate control device.

EML 315 digital plus N

EML 450 digital plus NEML 450 digital plus T

Optional HAVER ‘TwinNut’ the quick-release clamping system:

’TwinNut’ clamps for easy fixing and removal of the cover are an alternative to the standard ‘Classic’ knurled nuts. The guide rods of the ‘Classic’ system can also be used for the HAVER ‘TwinNut’ system.

Ordering information: Sieves and collecting pan must be ordered separately. IQ-OQ documentation on request.

Delivery information: Included as standard with each shaker: Models with either ‘Classic’ clamping system or ‘TwinNut’ system are supplied with two guide rods (660 mm for EML 200 and EML 315; 850 or 1000 mm for EML 450) and two knurled nuts with handlebars, cover with inspection glass and water spray diffuser for wet sieving models.

Application Type Pk Cat. No.EML 315 digital plus with ‘Classic’ clamping system, for sieves up to 315 mm ØDry sieving EML 315 digital plus T, EU-plug 1 VWRI550061EUWet sieving EML 315 digital plus N, EU-plug 1 VWRI550063EUEML 315 digital plus with ‘TwinNut’ quick-release clamping system, for sieves up to 315 mm ØDry sieving EML 315 digital plus T with ‘TwinNut’ quick-release clamping system, EU-plug 1 VWRI550084EUWet sieving EML 315 digital plus N with ‘TwinNut’ quick-release clamping system, EU-plug 1 VWRI550085EUEML 450 digital plus with ‘Classic’ clamping system, for sieves up to 450 mm ØDry sieving EML 450 digital plus T, EU-plug 1 VWRI550064EUWet sieving EML 450 digital plus N, EU-plug 1 VWRI550065EU


Description For Pk Cat. No.AccessoriesGuide rod, length 850 mm (one only) EML 450 digital plus/UWL 400 1 510-0976Knurled nut with two handlebars (one only) EML 450 digital plus/UWL 400 1 510-0977Cover with inspection glass (test sieve diameter 300/305/315/350/400 and 450 mm) EML 450 digital plus 1 510-0992Cover with wide spreading spray diffuser (for wet sieving test sieve diameter 300/305/350/400 and 450 mm) EML 450 digital plus 1 510-0993Additional weight for extra stability for test sieve diameter 200 - 450 mm (27 kg) EML 450 digital plus 1 510-0994Reduction piece, polyamide, to receive a sieve pan with diameter 400 mm under larger sieves EML 450 digital plus 1 510-0996Cover with inspection glass (test sieve diameter only for >300 mm) EML 315 digital plus 1 510-0998Cover with wide spreading spray diffuser (for wet sieving test sieve diameter only for >300 mm) EML 315 digital plus 1 510-0999Cover with wide spreading spray diffuser (for wet sieving test sieve diameter only for >300 mm) EML 315 digital plus 1 510-1001Cover with wide spreading spray diffuser (for wet sieving test sieve diameter only for >300 mm) EML 315 digital plus 1 510-1002Cover with inspection glass (test sieve diameter only for >300 mm) EML 315 digital plus 1 510-1003Cover with inspection glass (test sieve diameter only for >300 mm) EML 315 digital plus 1 510-1004Reduction piece, polyamide, to receive a sieve pan with discharge nozzle, diameter 200 mm EML 315 digital plus 1 510-1252Sound absorbing cupboard EML 315 digital plus 1 510-1311Sound absorbing cupboard EML 450 digital plus/UWL 400 1 510-1312Inspection glass without centre hole (to be mounted on the cover) EML 450 digital plus/UWL 400 1 510-1010Guide rod, length 1000 mm (one only) EML 450 digital plus/UWL 400 1 510-1016Reduction piece for cover, for sieve Ø 76 mm EML 200 1 510-1017Reduction piece for cover, for sieve Ø 100 mm EML 200 1 510-1009Reduction piece for cover, for sieve Ø 150 mm EML 200 1 510-1013Reduction piece for cover, for sieve pan with discharge nozzle <400 mm EML 450 1 510-0997Inspection glass with central hole EML 200/EML 315 1 510-1018Inspection glass with central hole EML 450/UWL 400 1 510-1014

Description For Pk Cat. No.

IQ/OQ documentationEML 200 digital plus, EML 315 digital plus and EML 450 digital plus sieve shakers

1 510-1246

IQ-OQ documentation for VWR-HAVER sieve shakersVWR by Haver & Boecker

IQ/OQ documentation to assist with GLP compliance.

Application Type Pk Cat. No.EML 450 digital plus with ‘TwinNut’ quick-release clamping system, for sieves up to 450 mm ØDry sieving EML 450 digital plus T with ‘TwinNut’ quick-release clamping system, EU-plug 1 VWRI550087EUWet sieving EML 450 digital plus N with ‘TwinNut’ quick-release clamping system, EU-plug 1 VWRI550088EU


Sieve shakers, heavy duty, UWLHaver & Boecker

For test sieves up to 400 mm diameter or square sieves up to 500×500 mm

The UWL 400 is an efficient test sieve shaker and achieves optimum results for large feed quantities. It creates a three-dimensional sieving action and is especially designed for coarse grained products. The UWL 400 T is suitable for dry sieving; the UWL 400 N is suitable for wet sieving, and the UWL 400 H is suitable for square test sieves with beechwood frames.

• Separate control device, wall fixing possible• Rotation speed: 1500 min-1

• Timer function: 0 - 599 minutes• Max. loading: 50 kg (20 kg sieving material)• Sound emission: 70 dB(A)

Delivery information: Included as standard with each shaker: Models with either ‘Classic’ clamping system or HAVER ‘TwinNut’ system are supplied with 2×620 mm guide rods and two knurled nuts with handlebars, cover with inspection glass, water spray diffuser for wet sieving on model UWL 400 N and special appliance for beechwood frames on UWL 400 H model.

Application Type Pk Cat. No.UWL heavy duty sieve shakersDry sieving UWL 400 T, EU-plug 1 HAVE550404EUDry sieving with square sieves UWL 400 H, EU-plug 1 HAVE550473EUWet sieving UWL 400 N, EU-plug 1 HAVE550480EUUWL heavy duty sieve shakers with HAVER ‘TwinNut’ quick-release clamping systemDry sieving UWL 400 T with HAVER ‘TwinNut’ quick-release clamping system, EU-plug 1 HAVE550080EUWet sieving UWL 400 N with HAVER ‘TwinNut’ quick-release clamping system, EU-plug 1 HAVE550081EU


Sample splitters

EN-VEM Half Page Advert.indd 1 18.05.2017 10:45:32

Sample splittersVWR by Haver & Boecker

For dividing sieved material into representative test sieve samples.

Type RT 6,3 and 12,5

Consists of 1 lacquered sheet steel rack, 300×250×270 mm, 1 stainless steel divider and 3 receivers which are tin sheet (1,75 litres) or laminated plastic (2 litres).

Type RT 25; 37,5; 50 and 75

Consists of 1 rack 620×260×420 mm, 1 divider and 3 receivers with grab handles (8 litres), all of galvanised steel.

Description Type Pk Cat. No.Type RT 6,3 and 12,512 partitions of 6,3 mm, 1,75 l tin sheet receivers RT 6,3 1 510-049212 divisions of 6,3 mm, 2 l laminated plastic receivers RT 6,3 1 510-049418 partitions of 12,5 mm, 1,75 l tin sheet receivers RT 12,5 1 510-049118 partitions of 12,5 mm, 2 l laminated plastic receivers

RT 12,5 1 510-0493

Description Type Pk Cat. No.Type RT 25, 37,5, 50 and 7516 partitions of 25 mm RT 25 1 510-049012 partitions of 37,5 mm RT 37,5 1 510-04898 partitions of 50 mm RT 50 1 510-04886 partitions of 75 mm RT 75 1 510-0487

Description For Pk Cat. No.AccessoriesDivider, stainless steel, 12 divisions, 6,3 mm Sample splitter RT 6,3 1 510-0944Divider, stainless steel, 18 divisions, 12,5 mm Sample splitter RT 12,5 1 510-0499Divider, galvanised sheet steel, 16 divisions, 25 mm Sample splitter RT 25 1 510-0497Divider, galvanised sheet steel, 12 divisions, 37,5 mm Sample splitter RT 37,5 1 510-0943Divider, galvanised sheet steel, 8 divisions, 50 mm Sample splitter RT 50 1 510-0496Divider, galvanised sheet steel, 6 divisions, 75 mm Sample splitter RT 75 1 510-0942Rack, lacquered sheet steel, 300×250×270 mm Sample splitters RT 6,3 and RT 12,5 1 510-0498Rack, galvanised sheet steel, 620×260×420 mm Sample splitters RT 25, RT 37,5, RT 50 and RT 75 1 510-0495Receiver, tin sheet, 1,75 litres Sample splitters RT 6,3 and RT 12,5 1 510-1261Receiver with grab handles, galvanised sheet steel, 8 l Sample splitters RT 25, RT 37,5, RT 50 and RT 75 1 510-1263

P:1800 008 453 | www.bio-strategy.comE: [email protected]

Available from

VWR Products are sold exclusively at Bio-Strategy in Australia and New Zealand

ZPROVWRI9249-EN©2017 VWR

07/2017-AB-M

B-BW

GO TO VWR.COM FOR THE LATEST NEWS, SPECIAL OFFERS AND DETAILS FROM YOUR LOCAL VWR SUPPORT TEAM

VWR FOR SIEVING...VWR FOR SIEVING | WR 11 Test sieves Frame: Stainless steel; woven wire cloth: Stainless steel, ISO 3310, ASTM E11, BS 410, AFNOR Ø (mm) Height (mm) Mesh size (mm)

Documents