Townsend Catalog

TOWNSEND Parts Catalog

www.c-a-m.com 432-381-8750

TOWNSEND Revision: March 2010

Raising Performance. TogetherTM www.c-a-m.com

432-381-8750

2

Cameron welcomes the TOWNSEND brand.

Note on part numbers:

When ordering or referencing parts in this modified Townsend / Cameron

catalog, please add 3K- in front of all listed part numbers.

The world-renowned Townsend brand name is

gaining the strength and presence of a global

flow control equipment leader.

Camerons Drilling Systems division will offer

replacement parts and service provided under

the Townsend name. With this powerful

acquisition, Cameron continues to fulfill our

promise of raising performance. Together.



432-381-8750

3

The Type 81 Ram Type BOP is comparable with Shaffer's Sentinel II and WSI Duke style blowout preventers. The Type 81 Manual is available in 7-1/16 X 3M & 9 X 3M pressure ratings. Type 81 Hydraulic is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M and 9 X 5M pressure ratings. Available in Single, Double and Triple Configurations. Type 81 Ram Blocks are available in the following sizes: 7-1/16 X 3M - CSO (Blind) to 5-1/2" - 1.660" to 2-7/8" Offset 7-1/16 X 5M - CSO (Blind) to 5-1/2" - 1.660" to 2-7/8" Offset 9 X 3M/5M - CSO (Blind) to 7-5/8" - 1.660" to 3-1/2" Offset

The Type 81-84 Annuram BOP is comparable to attaching a Hydril GK style Annular BOP on top of a single or double Shaffer Sentinel BOP or WSI style single or double BOP. The Type 81-84 Annuram BOP is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M and 9 X 5M pressure ratings. Note: 7-1/16 X 5M Type 84 Annuram Annular requires specifc Unit & Seal Kit.

The Type 82 Ram BOP is comparable with Shaffer's LWS preventer. The Type 82 Hydraulic Preventer is available in 7-1/16 X 3M, 7-1/16 X 5M, 11 X 3M, 11 X 5M, 13-5/8 X 3 M and 13-5/8 X 5M pressure ratings. Available in Single, Double and Triple Configurations. The Type 82 Ram Bop accepts Shaffer Type 70 Ram Blocks Ram Blocks are available in the following sizes: 7-1/16" Type 61 Rams - CSO (Blind) to 5-1/2" - 1.660 to 3-1/2" Offset 11" Type 70 Rams - CSO (Blind) to 8-5/8" - 2-3/8" to 3-1/2" Offset 13-5/8" Type 70 Rams - CSO (Blind) to 10-3/4" 11" & 13-5/8" Rams are also available in VBR (Variable Bore) 2-3/8" to 3-1/2" & 4" to 5-1/2"

The Type 82-90 Annuram BOP is comparable to attaching a Shaffer Annular on top of a Shaffer style LWS ram type BOP. The Type 82-90 Annuram BOP is available in 7-1/16 X 5M and 9 X 3M configurations.

TOWNSEND GENERAL BOP INFORMATION

TYPE 81 RAM PREVENTER

TYPE 81-84 ANNURAM


TYPE 82-90 ANNURAM



432-381-8750

4

The Type 84 Annular BOP is comparable to Hydril's Type GK Annular The Type 84 Annular is available in 7-1/16 X 3M, 7-1/16 X 5M "SHORTY", 9 X 3M, 11 X 3M, 11 X 5M, 13-5/8 X 3M and 13-5/8 X 5M Packing Units are available in both Synthetic and Natural Compounds. Packing Units and Seals are interchangable with Hydril GK Annulars Available with flanged or studded bottom. Notice: 7-1/16 X 5M Type 84 "Shorty" requires specific Unit & Seal Kit.

The Type 88 Ram Type BOP is comparable with Shaffer's LWP style Bop The Type 88 Hydraulic BOP is available in 9 X 3M pressure rating only. Available in as Single, Double and Triple configurations. Type 88 Ram Blocks are available in the following sizes: CSO (Blind) to 7-5/8" - 1.660" to 3-1/2" Offset

The Type 90 Annular Preventer is comparable to Shaffer's Annular style BOP. The Type 90 Annular is available in 7-1/16 X 3M, 7-1/16 X 5M, 9 X 3M, 11 x 3M, 11 X 5M and 13-5/8" X 5M pressure ratings. (13-5/8 X 5M Annular is also available with 13-5/8 X 3M Connection) Packing Units are available in standard configurations or "ANUFLEX" Packing Units are avaliable in Sunthetic and Natural Compounds.

The Type 88-84 Annuram BOP is comparable to placing a Hydril GK Annular on top of a Shaffer LWP preventer. The Type 88-84 Annuram BOP is available in 9 X 3M pressure rating only. The Type 88-84 Bop is available in single or double ram configurations. Note: 7-1/16 X 5M "Shorty" Type 84 Annuram Annular requires specific Packing Unit and Seal Kit.


TYPE 84 ANNULAR


TYPE 88-84 ANNURAM

TYPE 90 ANNULAR



432-381-8750

5


The Type ST Ram Type Preventer is comparable with Cameron's Type U Bop. The Type ST Preventer is available in 7-1/16 X 3M, 7-1/16 X 5M, 7-1/16 X 10M, 7-1/16" X 15M, 11 X 3M, 11 X 5M, 13-5/8 X 3M & 13-5/8 X 5M pressure ratings. Shear Boosters are available Type ST or Cameron Type U Ram Blocks are available in the following sizes: CSO (Blind) to Casing sizes & Dual, Dual Offset & Shear Rams

The BISON Accumulator is comparable to Shaffer, Stewart Stevenson and Koomey accumulators. The BISON Accumulator is available skid mounted or Trailer mounted. The BISON Accumulator is available with gasoline or diesel engines. The standard BISON Well Service Unit is 40 Gallon, other sizes up to 240 Gallon are available. THE BISON Accumulator is offered either Remote or Manually operated. The BISON Accumulator is manufactured by BURNSCO BOP SERVICES INC. API 16-D Licenses no. 16D-0020

The Type 99 Ram Type Preventer is comparable with Shaffer's Chasovoy BOP. The Type 99 Preventer is only available in Hydraulic. The Type 99 is available in Double configuration. Type 99 Ram Blocks are available in the following sizes: CSO (Blind) to 5-1/2" - 1.660 to 2-7/8" Note: Townsend Type 99 does not have the reversable bonnets found in Shaffer's Chasovoy BOP (Shaffer's Chasavoy style Bop is pattented)

Notice: Townsend, is not affiliated with Shaffer, Hydril, Stewart & Stevenson or Koomey. Cameron Type U, Shaffer LWP, LWS, Chasavoy, Sentinel, Hydril GK, WSI, Cad, Stewart & Stevenson and Koomey are trademarks of the above mentioned companies and reference to this equipment is intended for reader's reference only. Townsend does not intend to give the reader the impression that it manufactures any equipment for any of the above companies. Townsend and it's logos and literature are also protected by trademarks and copyright laws.


TYPE ST RAM PREVENTER

BISON ACCUMULATORS



432-381-8750

6

TOWNSEND TYPE 81 MANUAL OPERATED BOP 7-1/16 X 3M 9 X 3M

Note: Item 39 - Alignment Plug is use on old style Type 81 only.

36

23

6A



432-381-8750

7

TOWNSEND TYPE 81 MANUAL OPERATED BOP ITEM SINGLE DOUBLE TRIPLE DESCRIPTION 7-1/16 X 3M 7-1/16 X 5M 9 X 3M

--- --- --- --- COMPLETE BOP - SINGLE (STUDDED) TM8101 TM8101-5 TM8101-8 --- --- --- --- COMPLETE BOP - DOUBLE (STUDDED) TM8102 TM8102-5 TM8102-8 --- --- --- --- COMPLETE BOP - TRIPLE (STUDDED) TM8103 TM8103-5 TM8103-8 1 1 1 1 SINGLE BODY (STUDDED) TM8107 TM8107-5 TM8107-8 1 1 1 1 DOUBLE BODY (STUDDED) TM8108 TM8108-5 TM8108-8 1 1 1 1 TRIPLE BODY (STUDDED) TM8109 TM8109-5 TM8109-8 2 24 24 24 TAP END STUD 300-330 300-770 300-765 3 24 24 24 G-2 HEX NUT 300-703 300-705 300-705 4 20 40 60 1" G-2 HEX NUT 300-702 300-702 300-702 5 20 40 60 TAP END STUD 300-315 300-315 300-315 6 2 4 6 PILLOW BLOCK TM815 TM815 TM815

7 4 8 12 PILLOW BLOCK CAP SCREW TM816 TM816 TM816 8 4 8 12 BEARINGS (STEM BEARING HOUSING) TM817 TM817 TM817 9 8 16 24 BEARING RACE (STEM BEARING HOUSING) TM818 TM818 TM818

10 2 4 6 THREAD PROTECTOR SNAP RING TM819 TM819 TM819 11 2 4 6 GREASE FITTINGS (GREASE PLATE) TM8110 TM8110 TM8110 13 2 4 6 CHAIN TM8112 TM8112 TM8112 14 12 24 36 SOCKET HEAD SCREWS (BONNET) TM8113 TM8113 TM8113 15 2 4 6 SNAP RING (DRIVE SHAFT) TM8114 TM8114 TM8114 16 2 2 2 LIFTING PLATE TH819 TH819 TH819-8 17 1 2 3 HAND WHEEL TH8111 TH8111 TH8111 19 1 2 3 UNIVERSAL JOINT (1-1/4" SQUARE) TM8118 TM8118 TM8118 20 2 4 6 PACKING GLAND O. D. O-RING SEAL TH8116 TH8116 TH8116-8 21 2 4 6 DOOR SEAL TH8121 TH8121 TH8121-8 22 2 4 6 PACKING GLAND I.D. WIPER SEAL TH8122 TH8122 TH8122 23 4 8 12 END COVER SEAL TH8115 TH8115 TH8115 24 2 4 6 STEM NUT - SPROCKET TM8122 TM8122 TM8122 25 2 4 6 SPROCKET - DRIVE SHAFT TM8123 TM8123 TM8123 26 2 4 6 GREASE PLATE TM8124 TM8124 TM8124 27 1 2 3 RAM SHAFT - LEFT HAND TM8125 TM8125 TM8125-8 28 1 2 3 RAM SHAFT - RIGHT HAND TM8126 TM8126 TM8126-8 29 2 4 6 THREAD PROTECTOR TM8127 TM8127 TM8127-8 30 1 2 3 STEM BEARING HOUSING RH. TM8128 TM8128 TM8128-8 31 1 2 3 STEM BEARING HOUSING LH. TM8129 TM8129 TM8129-8 32 2 4 6 BEARING HOUSING TM8130 TM8130 TM8130 33 2 4 6 RAM SHAFT PACKING GLAND TH8124 TH8124 TH8124-8 34 2 4 6 PACKING ASSEMBLY TH8125 TH8125 TH8125 36 1 2 3 DRIVE SHAFT TM8133 TM8133 TM8133-8 37 4 4 4 SPROCKET PROTECTOR TM8134 TM8134 TM8134 38 2 4 6 RAM GUIDE PIN TH8126 TH8126 TH8126

**39 2 4 6 ALIGNMENT PLUG (used on old style 81 only) TH8127 TH8127 TH8127-8 40 2 4 6 END COVER TM8137 TM8137 TM8137-8 41 1 2 3 DOOR TH8129 TH8129 TH8129-8 43 2 4 6 BEARING RING (BEARING HOUSING) TM8140 TM8140 TM8140 44 2 4 6 O-RING SEAL (used on old style 81 only) TM8141 TM8141 TM8141-8

45 2 4 6 BONNET REBUILD KIT (10,12,15,20,22,34) TM8100 TM8100 TM8100 50 1 2 3 RAM ASSEMBLY REFER TO RAM ASSEMBLY PAGE

6-A 2 4 6 PILLOW BLOCK SPACER TM815-S TM815-S TM815-S



432-381-8750

8

TOWNSEND TYPE 81 HYDRAULIC BOP 7-1/16 X 3M 7-1/16 X 5M

9 X 3M 9 X 5M

Note: Item 30 - Alignment Plug is use on old style Type 81 only.

OLD STYLE 81 ONLY

42 43

PIPE PLUG 45



432-381-8750

9

TOWNSEND TYPE 81 HYDRAULIC BOP ITEM SINGLE DOUBLE TRIPLE DESCRIPTION 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 9 X 5M

--- --- --- --- COMPLETE BOP - SINGLE (STUDDED) TH8101 TH8101-5 TH8101-8 TH8101-8-5 --- --- --- --- COMPLETE BOP - DOUBLE (STUDDED) TH8102 TH8102-5 TH8102-8 TH8102-8-5 --- --- --- COMPLETE BOP - TRIPLE (STUDDED) TH8103 TH8103-5 TH8103-8 TH8103-8-5 1 --- --- --- SINGLE BODY (STUDDED) TH8107 TH8107-5 TH8107-8 TH8107-8-5 1 --- --- --- DOUBLE BODY (STUDDED) TH8108 TH8108-5 TH8108-8 TH8108-8-5 1 --- --- --- TRIPLE BODY (STUDDED) TH8109 TH8109-5 TH8109-8 TH8109-8-5 2 24 24 24 TAP END STUD 300-330 300-770 300-765 300-782 3 24 24 24 G2 HEX NUT 300-703 300-705 300-705 300-707 4 8 16 24 END COVER G2 HEX NUT 300-702 300-702 300-702 300-702 5 8 16 24 END COVER TAP END STUD 300-315 300-315 300-321 300-321 6 2 4 6 INSIDE BONNET SEAL TH815 TH815 TH815 TH815 7 6 12 18 1/4" NPT PIPE PLUG TH816 TH816 TH816 TH816 9 12 24 36 CYLINDER HEX HEAD BOLT TH818 TH818 TH818-8 TH818-8

10 2 4 6 BONNET REBUILD KITS TH8100 TH8100 TH8100 TH8100 11 2 2 2 LIFTING PLATE TH819 TH819 TH819-8 TH819-8 13 1 2 3 14" HAND WHEEL TH8111 TH8111 TH8111 TH8111 14 1 2 3 UNIVERSAL JOINT TH8112 TH8112 TH8112 TH8112 15 2 4 6 SET SCREW S.S. TH8113 TH8113 TH8113 TH8113 16 4 8 12 M.O.R. PROTECTOR BOLT TH8114 TH8114 TH8114 TH8114 17 4 8 12 END COVER SEAL TH8115 TH8115 TH8115 TH8115 18 2 4 6 O. D. PACKING GLAND O-RING TH8116 TH8116 TH8116-8 TH8116-8 20 4 8 12 CYLINDER O-RING TH8117 TH8117 TH8117 TH8117 21 4 8 12 END COVER PORT O-RING TH8118 TH8118 TH8118 TH8118 22 2 4 6 PISTON TO RAM SHAFT O-RING TH8119 TH8119 TH8119 TH8119 23 4 8 12 MANIFOLD TUBE O-RING TH8120 TH8120 TH8120 TH8120 24 2 4 6 DOOR SEAL TH8121 TH8121 TH8121-8 TH8121-8 25 2 4 6 PACKING GLAND I.D. WIPER TH8122 TH8122 TH8122 TH8122 26 2 4 6 PISTON CROWN SEAL TH8123 TH8123 TH8123 TH8123 27 2 4 6 PACKING GLAND TH8124 TH8124 TH8124-8 TH8124-8 28 2 4 6 RAM SHAFT PACKING ASSEMBLY TH8125 TH8125 TH8125 TH8125 29 2 4 6 RAM GUIDE PIN TH8126 TH8126 TH8126 TH8126

** 30 2 4 6 ALIGNMENT PLUG (Old style 81 only) TH8127 TH8127 TH8127-8 TH8127-8 31 2 4 6 END COVER (LEFT OR RIGHT) TH8128 TH8128 TH8128-8 TH8128-8 32 2 4 6 DOOR TH8129 TH8129-5 TH8129-8 TH8129-8-5 33 2 4 6 PISTON TH8130 TH8130 TH8130 TH8130 34 2 4 6 CYLINDER TH8131 TH8131 TH8131-8 TH8131-8 35 2 4 6 BALANCE STEM TH8132 TH8132 TH8132-8 TH8132-8 36 2 4 6 PROTECTOR, M.O.R. TH8133 TH8133 TH8133-8 TH8133-8 37 2 4 6 LOCKING SHAFT TH8134 TH8134 TH8134-8 TH8134-8 38 2 4 6 RAM SHAFT TH8135 TH8135 TH8135-8 TH8135-8 39 2 4 6 MANIFOLD TUBE TH8136 TH8136 TH8136-8 TH8136-8 41 2 4 6 BONNET (LEFT OR RIGHT) TH8137 TH8137 TH8137-8 TH8137-8 42 10 20 30 DOOR NUT 300-702 300-703 300-702 300-703 43 10 20 30 DOOR STUD 300-315 300-325 300-315 300-325 44 2 4 6 BRASS SPACER RING TH8140 TH8140 TH8140 TH8140 45 4 8 12 PIPE PLUG 3/4" TH 8145 TH 8145 TH 8145 TH 8145 50 1 2 3 RAM ASSEMBLY --- --- --- ---

M.O.R. = MANUAL OVER RIDE ITEM 31 & 41 HYDRAULIC PORT HOLES DIFFERENT ON LEFT & RIGHT SIDE



432-381-8750

10

TOWNSEND TYPE 82 RAM TYPE BOP 7-1/16 X 5M 11 X 3M

NOTE: ITEM 14 IS PART OF CYLINDER ON 11" X 3M TYPE 82

4

20



432-381-8750

11

TOWNSEND TYPE 82 RAM TYPE BOP ITEM SINGLE DOUBLE DESCRIPTION 7-1/16 X 3M 7-1/16 X 5M 11 X 3M

--- --- --- SINGLE BOP COMPLETE (STUDDED) TH7101-7-3 TH7101-7-5 TH7101-11-3 --- --- --- DOUBLE BOP COMPLETE (STUDDED) TH7102-7-3 TH7102-7-5 TH7102-11-3 1 1 1 SINGLE BODY TH7109-7-3 TH7109-7-5 TH7109-11-3 1 1 1 DOUBLE BODY TH7110-7-3 TH7110-7-5 TH7110-11-3 2 1 2 DOOR - RIGHT HAND TH7111 TH7111 TH7111-11 3 1 2 DOOR - LEFT HAND TH7112 TH7112 TH7112-11 4 12 24 PIPE PLUG TH7113 TH7113 TH7113 5 2 4 DOOR SEAL TH7114 TH7114 TH7114-11 6 16 32 DOOR BOLT TH7115 TH7115 -------

7 2 4 CYLINDER TH7116 TH7116 TH7116-11 9 1 2 CYLINDER HEAD - RIGHT TH7117 TH7117 TH7117-11

10 1 2 CYLINDER HEAD - LEFT TH7118 TH7118 TH7118-11 11 4 8 CYLINDER. TO CYL. HEAD SEAL TH7119 TH7119 TH7119 12 12 24 BOLT, CYLINDER. TO CYLINDER HEAD TH7120 TH7120 TH7120-11 14 2 4 MANIFOLD, CYLINDER TH7122 TH7122 IN CYLINDER 15 4 8 SEAL, CYLINDER MANIFOLD TH7123 TH7123 TH7123 16 2 4 RAM SHAFT TH7124 TH7124 TH7124-11 17 2 4 PACKING ADAPTER - R-SHAFT TH7125 TH7125 TH7125 18 4 8 SEAL, PK. ADAPTER - INNER TH7126 TH7126 TH7126 19 4 8 SEAL, PK. ADAPTER - OUTER TH7127 TH7127 TH7127 20 2 4 RETAINER, PACK ADAPTER TH7128 TH7128 TH7128 21 2 4 SCRAPER RING, RAM SHAFT TH7129 TH7129 TH7129 22 2 4 PISTON ASSEMBLY TH7130 TH7130 TH7130 23 2 4 PISTON BODY TH7131 TH7131 TH7131 24 4 8 PISTON RUBBER TH7132 TH7132 TH7132 27 2 4 PISTON SEAL O-RING TH7135 TH7135 TH7135 28 2 4 PISTON LOCK NUT TH7136 TH7136 TH7136 29 2 4 SET SCREW - LOCK NUT TH7137 TH7137 TH7137 30 2 4 LOCKING SHAFT TH7138 TH7138 TH7138-11 31 2 4 THRUST BUSHING - LOCK SH.AFT TH7139 TH7139 TH7139 32 2 4 RETAINER, THRUST BUSHING TH7140 TH7140 TH7140 33 4 8 SEAL, THRUST BUSH.- OUTER TH7141 TH7141 TH7141 34 4 8 SEAL, THRUST BUSH - INNER TH7142 TH7142 TH7142 35 2 4 SCRAPER RING, LOCK. SHAFT TH7143 TH7143 TH7143 36 2 4 HINGE BRACKET TH7144 TH7144 TH7144 37 4 8 DOWEL PIN TH7145 TH7145 TH7145 38 4 8 CAP SCREW, HINGE BKT. SHT TH7146 TH7146 TH7146 39 2 4 CAP SCREW, HINGE BKT. LNG TH7147 TH7147 --------- 40 1 2 HINGE MANIFOLD -STRAIGHT TH7148 TH7148 TH7148-11 41 1 2 HINGE MANIFOLD - CURVED TH7149 TH7149 TH7149-11 42 8 16 SEAL, HINGE MANIFOLD TH7150 TH7150 TH7150 43 2 4 HINGE PIN TH7151 TH7151 TH7151-11 44 20 40 SEAL, HINGE PIN TH7152 TH7152 TH7152 45 2 4 RETAINER, HINGE PIN TH7153 TH7153 TH7153 46 4 8 PIPE PLUG TH7154 TH7154 TH7154 47 2 4 GREASE FITTING TH7155 TH7155 TH7155 49 1 SET 2 SET RAM ASSEMBLY REFER TO RAM ASSEMBLIES 52 2 2 HAND WHEEL TH8111 TH8111 TH8111 53 2 2 U-JOINT 1-1/4 HEX TH9982 TH9982 TH9982 -- 2 2 BONNET REBUILD KIT TH7100 TH7100 TH7100

6 12 24 DOOR BOLT ------- ------- TH7115



432-381-8750

12

TOWNSEND TYPE 82 RAM TYPE BOP 11 X 5M - 13-5/8 X 3M - 13-5/8 X 5M

Note: Item 16 & 17 - INNER & OUTER ADAPTER O-RINGS IN OLD STYLE TYPE 82 PREVENTERS ONLY.

4

4

16



432-381-8750

13

TOWNSEND TYPE 82 RAM TYPE BOP ITEM SINGLE DOUBLE DESCRIPTION 11 X 5M 13-5/8 X 3M 13-5/8 X 5M

--- --- --- SINGLE COMPLETE BOP - STUDDED TH7101-11-5 TH7101-13-3 TH7101-13-5 --- --- --- DOUBLE COMPLETE BOP - STUDDED TH7102-11-5 TH7102-13-3 TH7102-13-5 1 1 1 SINGLE BODY - STUDDED TH7109-11-5 TH7109-13-3 TH7109-13-5 1 1 1 DOUBLE BODY - STUDDED TH7110-11-5 TH7110-13-3 TH7110-13-5 2 1 2 DOOR - RIGHT HAND TH7111-11-5 TH7111-13 TH7111-13 3 1 2 DOOR - LEFT HAND TH7112-11-5 TH7112-13 TH7112-13 4 12 24 PIPE PLUG TH7113-11-5 TH7113-11-5 TH7113-11-5 5 2 4 DOOR SEAL TH-7114-11-5 TH7114-13 TH7114-13 6 20 40 DOOR BOLT TH7115-11-5 TH7115-13 TH7115-13

7 2 4 CYLINDER TH7116-11-5 TH7116-13 TH7116-13 8 2 4 CYLINDER HEAD TH7117-11-5 TH7117-5 TH7117-5 9 4 8 CYLINDER TO CYLINDER HEAD SEAL TH7119-11-5 TH7119-11-5 TH7119-11-5

10 12 24 CYLINDER HEAD STUD TH7120-11-5 TH7120-11-5 TH7120-11-5 11 4 8 PIPE PLUG TH7162 TH7162 TH7162

11-A 2 4 1" CHECK VALVE ST8724 ST8724 ST8724 11-B 2 4 1" SET SCREW ST5930-5 ST5930-5 ST5930-5 12 4 8 CYLINDER MANIFOLD PORT SEAL TH7123-11-5 TH7123-11-5 TH7123-11-5 13 2 4 RAM SHAFT TH7124-11-5 TH7124-11-5 TH7124-11-5 14 4 8 RAM SHAFT PACKING TH7133 TH7133 TH7133 15 2 4 PACKING ADAPTER - RAM SHAFT TH7125-11-5 TH7125-11-5 TH7125-11-5

18 2 4 WIPER RING HOLDER TH7164 TH7164 TH7164 19 2 4 PACKING BACK-UP RING RETAINER TH7128-11-5 TH7128-11-5 TH7128-11-5 20 2 4 PISTON ASSEMBLY TH7130-11-5 TH7130-11-5 TH7130-11-5 21 2 4 PISTON BODY TH7131-11-5 TH7131-11-5 TH7131-11-5 22 4 8 PISTON RUBBER TH7132-11-5 TH7132-11-5 TH7132-11-5 23 2 4 SCRAPER RING - RAM SHAFT TH7129-11-5 TH7129-11-5 TH7129-11-5 24 2 4 PACKING BACK-UP RING TH7134 TH7134 TH7134 26 2 4 PISTON O-RING TH7135-11-5 TH7135-11-5 TH7135-11-5 27 2 4 PISTON LOCK NUT TH7136-11-5 TH7136-11-5 TH7136-11-5 28 4 8 LOCK NUT SET SCREW TH7137-11-5 TH7137-11-5 TH7137-11-5 29 2 4 LOCKING SHAFT TH7138-11-5 TH7138-11-5 TH7138-11-5 30 2 4 THRUST BUSHING - LOCK SHAFT TH7139-11-5 TH7139-11-5 TH7139-11-5 31 2 4 RETAINER, THRUST BUSHING TH7140-11-5 TH7140-11-5 TH7140-11-5 32 2 4 LOCKING SHAFT SEAL TH7141-11-5 TH7141-11-5 TH7141-11-5 34 2 4 SCRAPER RING, LOCK. SHAFT TH7153-11-5 TH7153-11-5 TH7153-11-5 35 2 4 SCRAPER RING - CARRIER TH7166 TH7166 TH7166 36 2 4 HINGE BRACKET TH7144-11-5 TH7144-13 TH7144-13 37 4 8 DOWEL PIN TH7145-11-5 TH7145-11-5 TH7145-11-5 38 8 16 CAP SCREW, HINGE BRACKET TH7146-11-5 TH7146-11-5 TH7146-11-5

39-A 1 2 HINGE MANIFOLD -STRAIGHT TH7148-11-5 TH7148-13 TH7148-13 39-B 1 2 HINGE MANIFOLD - CURVED TH7149-11-5 TH7149-13 TH7149-13 40 8 16 SEAL, HINGE MANIFOLD TH7150 TH7150 TH7150 41 2 4 HINGE PIN TH7151-11-5 TH7151-13 TH7151-13 42 4 8 HINGE PIN PLUG TH7113 TH7113 TH7113 43 20 40 HINGE PIN - O-RING TH7152-11-5 TH7152-13 TH7152-13 44 2 4 HINGE PIN RETAINER TH7153 TH7153 TH7153 45 4 8 PIPE PLUG TH7154 TH7154 TH7154 46 ---- ---- TAP END STUD & NUT REFER TO STUD CHART 47 12 24 CYLINDER HEAD NUT 300-703 300-703 300-703 50 2 4 HAND WHEEL TH8111 TH8111 TH8111 51 2 4 U-JOINT TH82ST TH82ST TH82ST -- 2 4 BONNET REBUILD KIT TH7200 TH7200 TH7200 53 1 SET 2 SET RAM BLOCKS REFER TO RAM BLOCK ASSEMBLY

16 4 8 GREASE FITTINGS TH7155 TH7155 TH7155



432-381-8750

14

TOWNSEND 9 X 3M TYPE 88 RAM TYPE PREVENTER ( COMPARABLE WITH SHAFFER LWP STYLE PREVENTER)

SINGLE DOUBLE TRIPLE

11

11

11 11

A

A B



432-381-8750

15

TOWNSEND 9 X 3M TYPE 88 RAM PREVENTER NO. SINGLE DOUBLE TRIPLE DESCRIPTION PART NO.

- TH9101 TH9102 TH9103 COMPLETE BOP ASSEMBLY - STUDDED --------

- TH9104 TH9105 TH9106 COMPLETE BOP ASSEMBLY - FLANGED --------

1 TH9110 TH9110-2 TH9110-3 BODY -------

2 1 2 3 DOOR - RIGHT HAND TH9111

3 1 2 3 DOOR - LEFT HAND TH9112

4 1 2 3 CYLINDER ASSEMBLY - RIGHT HAND. TH9113 5 1 2 3 CYLINDER ASSEMBLY - LEFT HAND TH9114

6 1 2 3 CYLINDER HEAD - RIGHT HAND TH9115

7 1 2 3 CYLINDER HEAD - LEFT HAND TH9116

8 2 4 6 RAM SHAFT TH9117

9 2 4 6 LOCKING SCREW TH9118

10 2 4 6 PISTON LOCK NUT TH9119

11 2 4 6 PISTON ASSEMBLY TH9120

11-A 4 8 12 PISTON RUBBER TH9107

11-B 2 4 6 PISTON TH9108

12 2 4 6 LOCKING SHAFT THRUST BUSHING TH7139

13 2 4 6 PACKING ADAPTER TH9122

14 1 2 3 HINGE BRACKET ASSEMBLY. - RIGHT HAND TH9123

15 1 2 3 HINGE BRACKET ASSEMBLY. - LEFT HAND TH9124

16 2 4 6 HINGE PIN TH9125

17 4 8 12 MANIFOLD SEAL TH9126

18 2 4 6 INTERNAL PISTON SEAL TH9127

19 4 8 12 EXTERNAL THRUST BUSHING SEAL TH9128

20 4 8 12 INTERNAL THRUST BUSHING SEAL TH9129

21 2 4 6 DOOR SEAL TH9130

22 4 8 12 HINGE BRACKET SEAL TH9131

23 16 32 48 HINGE PIN SEAL TH9132

24 4 8 12 EXTERNAL PACKING ADAPTER SEAL TH9133

25 4 8 12 INTERNAL PACKING ADAPTER SEAL TH9134

26 4 8 12 CYLINDER SEAL TH9135

27 2 4 6 SCRAPER RING - RAM SHAFT TH9136

28 2 4 6 LOCKING SHAFT SCRAPER RING TH9137

29 2 4 6 THRUST BUSHING RETAINER TH9138

30 2 4 6 PACKING ADAPTER RETAINER TH9139

31 4 8 12 HINGE PIN RETAINER TH9140

32 4 8 12 DOWEL PIN TH9141

33 2 4 6 THREAD PROTECTOR PLUG TH9142

34 16 32 48 DOOR BOLT TH9143

35 24 48 72 CYLINDER CAP SCREW TH9144

36 24 48 72 CYLINDER HEAD CAP SCREW TH9145

37 10 20 30 HINGE BRACKET CAP SCREW TH9146

40 1 2 3 RAM ASSEMBLY ----

41 2 4 6 HAND WHEEL TH8111

42 2 4 6 UNIVERSAL JOINT TH9982

** 2 4 6 BONNET REBUILD KIT TH9100



432-381-8750

16

TOWNSEND TYPE 99 RAM TYPE BOP 7-1/16 X 5M

1

12

2

3 31

30 29

28

4

5

6

7

8

5

4 9 10

11

9 13

14 15

16

17

18

19 20

21

12

16

15 13 24 25

26

27

37

35

34 33

32

38



432-381-8750

17

TOWNSEND TYPE 99 RAM TYPE BOP ITEM SINGLE DOUBLE DESCRIPTION PART NO.

--- --- --- COMPLETE SINGLE BOP TH9900

--- ---- --- COMPLETE DOUBLE BOP TH9901

1 1 1 SINGLE BODY TH9940

1 1 1 DOUBLE BODY TH9941

2 2 4 COMPLETE BONNET ASSEMBLY TH9902

3 2 4 BONNET TH9903

4 4 8 NIPPLE 1/4" PIPE TH9904

5 4 8 QUICK DISCONNECT (MALE) TH9905

6 2 4 DOOR SEAL (MOLDED) TH9906

*7 2 4 RAM SHAFT PACKING ASSEMBLY TH9907

8 2 4 1/2" PIPE PLUG TH9908

*9 8 16 MANIFOLD O-RING SEAL TH9909

10 2 4 DOOR MANIFOLD TH9910

*11 2 4 PISTON SEAL TH9911

*12 4 8 CYLINDER O-RING TH9912

*13 4 8 CYLINDER BACKUP RING TH9913

14 2 4 PIPE PLUG -1/2" TH9914

15 4 8 BLEEDER PLUG TH9915

*16 4 8 COPPER WASHER TH9916

17 2 4 CYLINDER HEAD TH9917

18 8 16 CYLINDER HEAD NUT TH9918

19 2 4 LOCKING SHAFT TH9919

20 2 4 BALANCE STEM TH9920

21 2 4 CYLINDER HEAD INTERMEDIATE TH9921

*22 2 4 INTERMEDIATE SEAL TH9922

25 2 4 CYLINDER TH9925

26 2 4 PISTON/RAM SHAFT ASSEMBLY TH9926

27 8 16 CYLINDER STUD TH9927

28 2 4 PLUG TH9928

29 2 4 SCREW TH9929

30 2 4 CHECK VALVE (SECONDARY SEAL)

TH9930

*31 6 12 STICK PACKING TH9931

32 2 4 BONNET NUT TH9932

33 4 8 STUD BODY SLEEVE TH9933

34 4 8 BONNET STUD TH9934

35 4 8 DOOR BOLT TH9935

37 2 4 WEAR PLATE TH9937

38 2 4 RAM BLOCK ASSEMBLY RAM PAGE

-- 2 4 HAND WHEEL TH8111

-- 2 4 U-JOINTS TH82ST

-- 2 4 BONNET REBUILD KIT 7,9,11,12.13.16,22 & 31

TH9950

NOTE: 7 RAM SHAFT SEAL ASSEMBLY CONSIST OF ITEMS MARKED WITH ASTERISK.

TH9907 RAM SHAFT SEAL ASSEMBLY

QNTY DESCRIPTION PART NO.

1 HYDRAULIC SEAL

TH9938

1 ADAPTER TH9939

1 SEAL TH9940

1 WIPER HOLDER RING

TH9941

1 WIPER SEAL TH9942

1 SPIRAL RE-TAINER RING

TH9943



432-381-8750

18

TOWNSEND "ST" RAM TYPE BOP 7-1/16" X 3M- 7-1/16 X 5M - 7-1/16 X 10M - 7-1/16 X 15M

1

2

3

4

4

5

6

22

22

23

25

18

21

19

41

40 20

35

7

8

12 34

38 37

36 10

27 28

33 9

29 11

30 31

32

26

42

17 16

15

24

13 NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.



432-381-8750

19

TOWNSEND 7-1/16" "ST" RAM TYPE BOP ITEM SINGLE DOUBLE DESCRIPTION 7-1/16 X 3M 7-1/16 X 5M 7-1/16 X 10M 7-1/16 X 15M

* 1 1 COMPLETE ASSEMBLY - SINGLE ST-30886 ST-30330 ST-30913 ST-30806

* 1 1 COMPLETE ASSEMBLY - DOUBLE ST-30887 ST-30988 ST-30915 ST-30917

1 1 1 BODY, SINGLE (OPEN FACE - FLANGED) ST-30889 ST-30316 ST-30914 ST-30807

1 1 1 BODY, DOUBLE (OPEN FACE - FLANGED) ST-30890 ST-30891 ST-30916 ST-30918

2 2 4 INTERMEDIATE FLANGE ST-30266-4 ST-30266-3 ST-30266-2 ST-30266-1

3 2 4 BONNET ST-30278-4 ST-30278-3 ST-30278-2 ST-30278-1

4 2 4 RAM ASSEMBLY REFER TO RAM BLOCK PAGE

5 2 4 OPERATING PISTON ST-667940 ST-667940 ST-667940 ST-667940

6 2 4 OPERATING CYLINDER ST-30274-2 ST-30274-2 ST-30274-2 ST-30274-2

7 2 4 LOCKING SCREW HOUSING ST-30308-1 ST-30308-1 ST-30308-1 ST-30308-1

8 2 4 LOCKING SCREW ST-30326 ST-30326 ST-30326 ST-30326

9 2 4 RAM CHANGE PISTON - OPEN ST-30324 ST-30324 ST-30324 ST-30324

10 2 4 RAM CHANGE PISTON - CLOSE ST-30325 ST-30325 ST-30325 ST-30325

11 4 8 RAM CHANGE CYLINDER ST-30273-2 ST-30273-2 ST-30273-2 ST-30273-2

12 8 16 BONNET BOLT ST-30312-7 ST-30312-7 ST-30312-7 ST-30312-8

13 16 32 LOCKING SCREW HOUSING ALLEN HEAD BOLT ST-5913-60-A ST-5913-60-A ST-5913-60-A ST-5913-60-A

15 2 4 PLASTIC CHECK VALVE ST-8724 ST-8724 ST-8724 ST-8724

16 2 4 PLASTIC PACKING SCREW ST-5940-9 ST-5940-9 ST-5940-9 ST-5940-9

17 2 4 PLASTIC PACKING PIPE PLUG ST-5930-5 ST-5930-5 ST-5930-5 ST-5930-5

*18 2 4 PLASTIC PACKING RING ST-12469-36 ST-12469-36 ST-12469-36 ST-12469-36

*19 2 4 PLASTIC ENERGIZING RING ST-18586-12 ST-18586-12 ST-18586-12 ST-18586-12

*20 2 4 CONNECTING ROD SEAL RING ST-31600-1 ST-31600-1 ST-31600-1 ST-31600-1

*21 4 8 BACK UP RING ST-21792-21 ST-21792-21 ST-21792-21 ST-21792-21

22 2 4 BONNET SEAL ST-644197-01 ST-644197-01 ST-644197-01 ST-644197-01

23 4 8 RAM GUIDE PIN ST-30313-2 ST-30313-2 ST-30313-2 ST-30313-2

*24 4 8 OPERATING CYLINDER SEAL ST-6227-73-13-90 ST-6227-73-13-90 ST-6227-73-13-90 ST-6227-73-13-90

*25 2 4 OPERATING PISTON ROD TO INT. FLANGE SEAL

ST-18492-92 ST-18492-92 ST-18492-92 ST-18492-92

*26 2 4 OPERATING PISTON SEAL ST-704774 ST-704774 ST-704774 ST-704774

*27 2 4 TAIL ROD SEAL ST-11741-32 ST-11741-32 ST-11741-32 ST-11741-32

*28 2 4 WIPING SEAL ST-6227-34-1-70 ST-6227-34-1-70 ST-6227-34-1-70 ST-6227-34-1-70

*29 4 8 RAM CHANGE PISTON TO BODY SEAL ST-18491-73 ST-18491-73 ST-18491-73 ST-18491-73

*30 4 8 RAM CHG. PISTON ROD TO INT. FLANGE SEAL ST-6227-32-13-90 ST-6227-32-13-90 ST-6227-32-13-90 ST-6227-32-13-90

*31 4 8 RAM CHANGE CYLINDER TO INT. FLANGE SEAL ST-6227-41-13-90 ST-6227-41-13-90 ST-6227-41-13-90 ST-6227-41-13-90

*32 4 8 RAM CHANGE CYLINDER TO BONNET SEAL ST-6227-45-13-90 ST-6227-45-13-90 ST-6227-45-13-90 ST-6227-45-13-90

*33 4 8 RAM CHANGE PISTON SEAL ST-6227-35-13-90 ST-6227-35-13-90 ST-6227-35-13-90 ST-6227-35-13-90

*34 8 16 BONNET BOLT RETAINER SEAL ST-6230-7-13-90 ST-6230-7-13-90 ST-6230-7-13-90 ST-6230-7-13-90

35 16 32 INTERNAL FLANGE TO BONNET CAP SCREW ST-18542-18 ST-18542-18 ST-18542-18 ST-18542-18

36 2 4 BLEEDER GLAND ST-17454-8 ST-17454-8 ST-17454-8 ST-17454-8

37 2 4 BLEEDER PLUG ST-17454-9 ST-17454-9 ST-17454-9 ST-17454-9

38 2 2 LIFTING EYE - 1-1/18" THREAD ST-11849 ST-11849 ST-11849 ST-11849

*39 10 20 PLASTIC PACKING ST-7650-8 ST-7650-8 ST-7650-8 ST-7650-8

*40 2 4 RETAINER RING ST-18572-83 ST-18572-83 ST-18572-83 ST-18572-83

*41 2 4 CONNECTING ROD SEAL WASHER ST-689523-04 ST-689523-04 ST-689523-04 ST-689523-04

*42 2 4 OPERATING PISTON WEAR RING ST-49223-03 ST-49223-03 ST-49223-03 ST-49223-03

--- 2 4 BONNET REBUILD KIT ST-644909-01 ST-644909-01 ST-644909-01 ST-644909-01

--- 2 4 U-JOINTS TH82ST TH82ST TH82ST TH82ST

--- 2 4 HAND WHEELS TH8111 TH8111 TH8111 TH8111

NOTE: * ITEMS ARE IN BONNET REBUILD KIT



432-381-8750

20

TOWNSEND "ST" RAM TYPE BOP 11 X 3M - 11 X 5M - 13-5/8 X 3M - 13-5/8 X 5M

1

2

3

4

4

5

6

22

22

23

25

18

21

19

41

40 20

35

7

8

12 34

38 37

36 10

27 28

33 9

29 11

30 31

32

26

42

17 16

15

24

13 NOTE: ITEM 13 TOWNSEND USES AN ALLEN HEAD BOLT INSTEAD ON TAP END STUD.



432-381-8750

21

TOWNSEND 11" & 13-5/8 "ST" RAM TYPE BOP ITEM SINGLE DOUBLE DESCRIPTION 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M

* 1 1 COMPLETE ASSEMBLY - SINGLE ST-30919 ST-30394 ST-30903 ST-30328

* 1 1 COMPLETE ASSEMBLY - DOUBLE ST-30922 ST-30899 ST-30905 ST-30329

1 1 1 BODY, SINGLE (OPEN FACE - FLANGED) ST-30921 ST-30344 ST-30904 ST-30721

1 1 1 BODY, DOUBLE (OPEN FACE - FLANGED) ST-30898 ST-30900 ST-30906 ST-30272

2 2 4 INTERMEDIATE FLANGE ST-30267-1 ST-30267-2 ST-30270-2 ST-30270-1

3 2 4 BONNET ST-30268-1 ST-30268-2 ST-30284-2 ST-30284-1

4 2 4 RAM ASSEMBLY REFER TO RAM BLOCK PAGE

5 2 4 OPERATING PISTON ST-673178 ST-673178 ST-679816 ST-679816

6 2 4 OPERATING CYLINDER ST-30274-3 ST-30274-3 ST-30274-1 ST-30274-1

7 2 4 LOCKING SCREW HOUSING ST-30308-2 ST-30308-2 ST-30308-3 ST-30308-3

8 2 4 LOCKING SCREW ST-30365 ST-30365 ST-30307 ST-30307

9 2 4 RAM CHANGE PISTON - OPEN ST-30362 ST-30362 ST-30310 ST-30310

10 2 4 RAM CHANGE PISTON - CLOSE ST-30363 ST-30363 ST-30309 ST-30309

11 4 8 RAM CHANGE CYLINDER ST-30273-3 ST-30273-3 ST-30273-1 ST-30273-1

12 8 16 BONNET BOLT ST-30312-4 ST-30312-3 ST-30312-9 ST-30312-1

13 16 32 LOCKING SCREW HOUSING ALLEN HEAD BOLT ST-5915-25-10 ST-5915-25-10 ST-5918-26-10 ST-5918-26-10

15 2 4 PLASTIC CHECK VALVE ST-8724 ST-8724 ST-8724 ST-8724

16 2 4 PLASTIC PACKING SCREW ST-5940-9 ST-5940-9 ST-5940-9 ST-5940-9

17 2 4 PLASTIC PACKING PIPE PLUG ST-5930-5 ST-5930-5 ST-5930-5 ST-5930-5

*18 2 4 PLASTIC PACKING RING ST-12469-38 ST-12469-38 ST-12469-24 ST-12469-24

*19 2 4 PLASTIC ENERGIZING RING ST-18586-13 ST-18586-13 ST-18586-1 ST-18586-1

*20 2 4 CONNECTING ROD SEAL RING ST-11741-38 ST-11741-38 ST-11741-36 ST-11741-36

*21 4 8 BACK UP RING ST-21792-22 ST-21792-22 ST-21792-26 ST-21792-26

22 2 4 BONNET SEAL ST-644197-02 ST-644197-02 ST-644197-03 ST-644197-03

23 4 8 RAM GUIDE PIN ST-30313-3 ST-30313-3 ST-30313-1 ST-30313-1

*24 4 8 OPERATING CYLINDER SEAL ST-6227-78-13-90 ST-6227-78-13-90 ST-6227-82-13-90 ST-6227-82-13-90

*25 2 4 OPERATING PISTON ROD TO INT. FLANGE SEAL

ST-18492-91 ST-18492-91 ST-18492-90 ST-18492-90

*26 2 4 OPERATING PISTON SEAL ST-704773 ST-704773 ST-704772 ST-704772

*27 2 4 TAIL ROD SEAL ST-11741-33 ST-11741-33 ST-11741-34 ST-11741-34

*28 2 4 WIPING SEAL ST-6227-38-1-70 ST-6227-38-1-70 ST-6227-40-1-70 ST-6227-40-1-70

*29 4 8 RAM CHANGE PISTON TO BODY SEAL ST-6227-29-13-90 ST-6227-29-13-90 ST-6227-31-13-90 ST-6227-31-13-90

*30 4 8 RAM CHG. PISTON ROD TO INT. FLANGE SEAL ST-6227-34-13-90 ST-6227-34-13-90 ST-6227-36-13-90 ST-6227-36-13-90

*31 4 8 RAM CHANGE CYLINDER TO INT. FLANGE SEAL ST-6227-44-13-90 ST-6227-44-13-90 ST-6227-49-13-90 ST-6227-49-13-90

*32 4 8 RAM CHANGE CYLINDER TO BONNET SEAL ST-6227-48-13-90 ST-6227-48-13-90 ST-6227-88-13-90 ST-6227-88-13-90

*33 4 8 RAM CHANGE PISTON SEAL ST-6227-38-13-90 ST-6227-38-13-90 ST-6227-41-13-90 ST-6227-41-13-90

*34 8 16 BONNET BOLT RETAINER SEAL ST-6230-5-1-90 ST-6230-7-13-90 ST-6230-9-1-90 ST-6230-9-1-90

35 16 32 INTERNAL FLANGE TO BONNET CAP SCREW ST-18542-19 ST-18542-19 ST-18542-20 ST-18542-20

36 2 4 BLEEDER GLAND ST-17454-8 ST-17454-8 ST-17454-8 ST-17454-8

37 2 4 BLEEDER PLUG ST-17454-9 ST-17454-9 ST-17454-9 ST-17454-9

38 2 2 LIFTING EYE - 1-1/8" THREAD ST-11849 ST-11849 ST-11849 ST-11849

*39 10 20 PLASTIC PACKING ST-7650-8 ST-7650-8 ST-7650-8 ST-7650-8

*40 2 4 RETAINER RING ST-18572-84 ST-18572-84 ST-18572-85 ST-18572-85

*41 2 4 CONNECTING ROD SEAL WASHER ST-689523-5 ST-689523-5 ST-689523-1 ST-689523-1

*42 2 4 OPERATING PISTON WEAR RING ST-49223-02 ST-49223-02 ST-49223-01 ST-49223-01

--- 2 4 BONNET REBUILD KIT ST-644909-02 ST-644909-02 ST-644909-03 ST-644909-03

--- 2 4 U-JOINTS 2" SQUARE ST-6018-03 ST-6018-03 ST-6018-03 ST-6018-03

--- 2 4 48" HAND WHEELS ST-5298 ST-5298 ST-5298 ST-5298

ITEMS ARE IN BONNET REBUILD KIT NOTE: *



432-381-8750

22

TOWNSEND TYPE 81-84 ANNURAM BOP 7-1/16 X 3M - 7-1/16 X 5M

1

11 9

12

3

4

8

5

2

6

7

10

12

23

31 39

14 13

21

22

44

24

27 33

51 36

18

47 42 43

25

50 40 30 46 41

34 35 28

17

38

14 13 45

29

32 26

48

37

16

15

18



432-381-8750

23

TOWNSEND TYPE 81-84 ANNURAM BOP

NO QTY DESCRIPTION 7-1/16 X 3M 7-1/16 X 5M

1 4 PROTECTOR PLATE SCREW 63-118 103-138

2 1 PROTECTOR PLATE 63-30693 65-30693

3 1 HEAD LOCKING SCREW 63-31607 63-31607

4 1 TOP NUT 63-31601 65-30664

5 1 INNER WEAR PLATE 63-1002036 63-1002036

6 1 HEAD GASKET 63-31602 63-31602

7 2 UPPER PISTON SEAL 63-31603 63-31603

8 1 PACKING UNIT (SYNTHETIC) 63-31078-S 63-31078-S

8 1 PACKING UNIT (NATURAL) 63-31078-N 65-31078-N

9 2 PISTON HEAD SEAL 103-31604 103-31604

10 2 LOWER PISTON SEAL 63-15614 63-15614

11 1 PISTON 63-31599 63-31599

** 1 ANNULAR SEAL KIT 63-50683 63-50683

12 1 81-84 ANNURAM BODY 63-31598- TH8101

65-30662- TH8101-5

13 10 G-2 HEX NUT 300-702 300-703

14 10 T. E. STUD 300-315 300-325

15 2 SEAL TH815 TH815

16 6 1/4" NPT PIPE PLUG TH816 TH816

17 2 1/3" NPT WEEP PLUG TH817 TH717

18 12 3/4" X 9-3/8" HEX HEAD BOLT TH818 TH818

19 2 BONNET REBUILD KITS TH8100 TH8100

21 2 14" HAND WHEEL TH8111 TH8111

22 2 UNIVERSAL JOINT TH8112 TH8112

23 2 1/4" X 1-4" S.S. SET SCREW TH8113 TH8113

24 4 3/8" X 3/4" BOLT TH8114 TH8114

25 4 SEAL TH8115 TH8115


26 2 O-RING SEAL TH8116 TH8116





31 2 DOOR SEAL TH8121 TH8121

32 2 WIPER TH8122 TH8122

33 2 CROWN SEAL TH8123 TH8123

34 2 PACKING GLAND TH8124 TH8124

35 2 PACKING ASSEMBLY TH8125 TH8125

36 2 RAM GUIDE PIN TH8126 TH8126

37 2 ALIGNMENT PLUG (OLD STYLE ONLY)

TH8127-5 TH8127

38 2 END COVER (LEFT & RIGHT) TH8128 TH8128

39 2 PRESSURE PLATE TH8129 TH8129

40 2 PISTON TH8130 TH8130

41 2 CYLINDER TH8131 TH8131

42 2 BALANCE STEM TH8132 TH8132

43 2 PROTECTOR, M.OR. TH8133 TH8133

44 2 LOCKING SHAFT TH8134 TH8134

45 2 RAM SHAFT TH8135 TH8135

46 2 MANIFOLD TUBE TH8136 TH8136

47 2 BONNET (LEFT OR RIGHT) TH8137 TH8137

50 2 BRASS SPACER RING TH8140 TH8140

51 1 RAM ASSEMBLY (SEE TYPE 81 RAM PAGE )

TYPE 81 TYPE 81

NOTE: TYPE 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIAL SEAL KIT & PACKING UNIT.



432-381-8750

24

TOWNSEND 82-90 ANNURAM BOP 7-1/16 X 3M - 7-1/16 X 5M

7

6

18

2

20 19

3

11

4

12

13

5

15

9

8

10

14

14

66 63

60 62

1

17

56 58

64

24

30

57

65 59

67

38

36

69

1 23

26

39 37

48 47 42

41 40

31 27

31 73

70

72 71

73

44

34 35

4

50

53

35

54 51 44 43

32

29 55 52



432-381-8750

25

TOWNSEND 82-90 ANNURAM BOP 7-1/16 X 3M - 7-1/16 X 5M


1 1 ASSEMBLY 151834 152168

1 1 BODY 152420 152174

2 1 UPPER HOUSING - STUDDED 150717 150726

3 1 PISTON 150718 150718

4 1 ADAPTER RING 1521631 152163

5 1 PACKING UNIT - SYNTHETIC 150847 150847

5 1 PACKING UNIT - NATURAL 150848 150848

5 1 PACKING UNIT - ANNUFLEX - SYN.

150847-AF 150847-AF

5 1 PACKING UNIT - ANNUFLEX - NAT. 150848-AF 150848-AF

6 24 STUD 150730 170730

7 24 NYLON HEX NUT 20106 20106

*8 1 UPPER I.D. SEAL 31105 31105

*9 1 LOWER PISTON I.D. SEAL 31000 31000

*10 2 O.D. PISTON SEAL 30780 30780

*11 1 UPPER ADAPTER I.D. SEAL 31104 31104

*12 1 LOWER ADAPTER I.D. SEAL 31002 31002

*13 1 O.D. ADAPTER SEAL 30408 30408

*14 1 TOP ADAPTER SEAL 30244 30405

*15 2 PISTON WEAR RING 150613 150613

*16 1 LOWER HOUSING WEAR RING 150613 150613

17 2 PIPE PLUGS TH7154 TH7154

18 2 ANCHOR SHACKLE 60496 60496

19 SET TOP ADAPTER STUD 300-330 300-770

20 SET G-2 HEX NUT 300-703 300-705

NS 1 ADAPTER RING WEAR RING 152344 152344

*** 1 ANNULAR SEAL KIT - OLD STYLE NEW STYLE - EXTRA LOWER SEAL

155079 155079-A

155079 155079-A

22 1 RIGHT HAND DOOR TH7111 TH7111

23 1 LEFT HAND DOOR TH7112 TH7112

24 2 PIPE PLUGS TH7113 TH7113

25 2 DOOR SEAL TH7114 TH7114

26 16 DOOR BOLT TH7115 TH7115

27 2 CYLINDER TH7116 TH7116

29 1 CYLINDER HEAD - RIGHT HAND TH7116 TH7117

30 1 CYLINDER HEAD - LEFT HAND TH7118 TH7118

31 4 CYL. TO CYLINDER HEAD SEAL TH7119 TH7119

32 12 CYL. TO CYLINDER. HEAD BOLT TH7120 TH7120


34 2 MANIFOLD CYLINDER TH7122 TH7122

35 8 CYLINDER MANIFOLD SEAL TH7123 TH7123

36 2 RAM SHAFT TH7124 TH7124

37 2 PACKING ADAPTER - RAM SHAFT TH7125 TH7125

38 4 PACKING ADAPTER SEAL - OUTER TH7126 TH7126

39 4 PACKING ADAPTER SEAL - INNER TH7127 TH7127

40 2 PACKING ADAPTER RETAINER TH7128 TH7128

41 2 SCRAPER RING - RAM SHAFT TH7129 TH7129

42 2 PISTON ASSEMBLY TH7130 TH7130

43 2 PISTON BODY TH7131 TH7131

44 4 PISTON RUBBER TH7132 TH7132

47 2 PISTON LOCK NUT SEAL TH7135 TH7135

48 2 PISTON LOCK NUT TH7136 TH7136

49 2 SET SCREW - PISTON LOCK NUT TH7137 TH7137

50 2 LOCKING SHAFT TH7138 TH7138

51 2 THRUST BUSHING - LOCK.I SHAFT TH7139 TH7139

52 2 RETAINER - THRUST BUSHING TH7140 TH7140

53 4 OUTER THRUST BUSHING SEAL TH7141 TH7141

54 4 INNER THRUST BUSHING SEAL TH7142 TH7142

55 2 SCRAPER RING - LOCKING SHAFT TH7143 TH7143

56 2 HINGE BRACKET TH7144 TH7144

57 4 DOWEL PIN TH7145 TH7145

58 8 HINGE BRACKET CAP SCREW -ST. TH7146 TH7146

59 2 HINGE BRACKET CAP SCREW -LG. TH7147 TH7147

60 1 MANIFOLD HINGE - STRAIGHT TH7148 TH7148

61 1 MANIFOLD HINGE - CURVED TH7149 TH7149

62 8 HINGE MANIFOLD SEAL TH7150 TH7150

63 2 HINGE PIN TH7151 TH7151

64 20 HINGE PIN SEAL TH7152 TH7152

65 2 HINGE PIN RETAINER TH7153 TH7153

66 4 PIPE PLUG TH7154 TH7154

67 4 GREASE FITTING TH7155 TH7155

68 4 BUSHING TH7156 TH7156

69 1 RAM ASSEMBLY (SET) **** ****

70 1 DOOR WRENCH TH7157 TH7157

71 1 CYLINDER HEAD WRENCH TH7158 TH7158

72 2 HAND WHEEL TH8111 TH8111

73 2 UNIVERSAL JOINT TH9982 TH9982

74 2 RAM PORTION SEAL KIT TH7100 TH7100



432-381-8750

26

TOWNSEND TYPE 84 ANNULAR BOP (COMPARABLE WITH HYDRIL TYPE GK ANNULAR)

1

7

6

2

5

4

3

8

8

10

9

12

11



432-381-8750

27

NO. DESCRIPTION NO. RQD

7-1/16 X 3M 7-1/16 X 5M SHORTY

9 X 3M 11 X 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M

- ASSEMBLY - FLANGED

- TA84-1600 TA84-0663 TA84-2877 TA84-1815 TA84-1400 TA84-0729 TA84-2873

1 PROTECTOR PLATE SCREW

4 TA84-118 (1-1/8")

TA84-138 (1-3/8")

TA84-138 (1-3/8")

TA84-138 (1-3/8"

TA84-178 (1-7/8")

TA84-138 (1-3/8")

TA84-158 (1-5/8")

2 PROTECTOR PLATE 1 TA84-0693-3 TA84-0693-5 TA84-2882 TA84-1406-3 TA84-1406-5 TA843-0741 TA84-8188

3 HEAD LOCKING SCREW

1 TA84-71607 TA84-71607 TA84-91607 TA84-91607 TA84-1407 TA84-1407 TA84-1407

4 SCREWED TOP 1 TA84-1601 TA84-0664 TA84-2879 TA84-1813 TA84-1398 TA84-0730 TA84-2944

5 WEAR PLATE 1 TA84-2036 TA84-2036 TA84-6117 TA84-1778 TA84-4203 TA84-4855 TA84-1788

6 HEAD GASKET 1 TA84-1602 *TA84-1602 TA84-2868 TA84-1809 TA84-1402 TA84-0738 TA84-8150

7 UPPER PISTON SEAL 2 TA84-1603 *TA84-1603 TA84-2870 TA84-1808 TA84-1403 TA84-0736 TA84-8151

8 PACKING UNIT (SYNTHETIC)

1 TA84-1078 -S

*TA84-1078 -S

TA84-2603 -S

TA84-1818 -S

TA84-1401 -S

TA84-0732 -S

TA84-8148 -S

8 PACKING UNIT (NATURAL)

1 TA84-1078 -N

*TA84-1078 -N

TA84-2603 -N

TA84-1818 -N

TA84-1401 -N

TA84-0732 -N

TA84-8148 -N

9 PISTON HEAD SEAL 2 TA84-1604 *TA84-1604 TA84-2871 TA84-1807 TA84-0736 TA84-0737 TA84-8152

10 LOWER PISTON SEAL 2 TA84-5614 *TA84-5614 TA84-2869 TA84-1604 TA84-2599 TA84-0735 TA84-8165

11 PISTON 1 TA84-1599 TA84-1599 TA84-2880 TA84-1814 TA84-1389 TA84-0731 TA84-8146

12 BODY FLANGED

1 TA84-1598 TA84-0662 TA84-2876 TA84-1812 TA84-1397 TA84-0728 TA84-2872

12 BODY STUDDED

1 TA84-1597 TA84-1630 TA84-2878 TA84-1816 TA84-1820 TA84-1708 TA84-2874

** COMPLETE SEAL KIT 1 TA84-0683 *TA84-0683 TA84-0685 TA84-0687 TA84-0688 TA84-0689 TA84-0690

7-1/16 X 3M - 7-1/16 X 5M "SHORTY" 9 X 3M - 11 X 3M - 11 X 5M 13-5/8 X 3M - 13-5/8 X 5M

TOWNSEND TYPE 84 ANNULAR BOP (COMPARABLE WITH HYDRIL GK ANNULAR)

* NOTE: 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIFIC SEAL KIT AND PACKING UNIT.

TOWNSEND TYPE 84 ANNULAR BOPS ARE COMPARABLE WITH HYDRIL GK STYLE ANNULAR. TOWNSEND'S 7-1/16 X 5M "SHORTY" TYPE 84 ANNULAR REQUIRES A DIFFERENT PACKING UNIT & SEAL KIT THAN THE STANDARD HYDRIL 7-1/16' X 5M GK ANNULAR BECAUSE OF THE HEIGHT DIFFERENCE.



432-381-8750

28

TOWNSEND TYPE 90 ANNULAR BOP (COMPARABLE WITH SHAFFER ANNULAR)

2

12

10 10

8

9

7 20

5

14

11

18

19

6

4

13 14

5

1

10

12

3

15

11

15

16

9 8

17

9A

16A

16B

15 16

16A 9A

13

16B

15

NOTE: Items 9A & 16A are for 6 X 3M & 6 X 5M "New Style" Type 90 Annular BOPS and require an additional lower piston seal and the 1" piston I.D. wear band material changes to 1/2" wear band material. Item 16B is an additional wear band added to adapter I.D. after 2005.

8A

NOTE: Items 8 & 8A are specific to 13-5/8 X 3/5M annular preventers. Item 8 is a polymeric type seal and 8A is a hard band type seal. New 13-5/8 X 3/5M Type 90 Annular, after 7/1/08 are equipped at the factory with the hard band type seal.



432-381-8750

29

TOWNSEND TYPE 90 ANNULAR BOP (COMPARABLE WITH SHAFFER ANNULAR)

NO. QTY. DESCRIPTION 7-1/16 X 3M 7-1/16 X 5M 9 X 3M 11 x 3M 11 X 5M 13-5/8 X 3M 13-5/8 X 5M ASSEMBLY TA90-1834 TA90-2168 TA90-2176 TA90-2027 TA90-2331 TA90-1973 TA90-2442

1 1 LOWER HOUSING TA90-2420 TA90-2174 TA90-2178 TA90-2019 TA90-2406 TA90-1974 TA90-2451 2 1 UPPER HOUSING TA90-0717 TA90-0726 TA90-0992 TA90-0486 TA90-2328 TA90-0735 TA90-2453 3 1 PISTON TA90-0718 TA90-0718 TA90-2837 TA90-0498 TA90-2326 TA90-2148 TA90-2148 4 1 ADAPTER RING TA90-2163 TA90-2163 TA90-2827 TA90-2026 TA90-2323 TA90-1933 TA90-1933 5 1 PACKING UNIT - SYNTHETIC TA90-0847-S TA90-0847-S TA90-0996-S TA90-0578-S TA90-0810-S TA90-0576-S TA90-0576-S 5 1 PACKING UNIT - NATURAL TA90-0848-N TA90-0848-N TA90-2272-N TA90-0579-N TA90-0809-N TA90-0577-N TA90-0577-N 5 1 ANUFLEX UNIT- SYNTHETIC TA90-0847-

AF TA90-0857-

AF TA90-0996-

AF TA90-0578-

AF TA90-0810-

AF TA90-0576-

AF TA90-0576-

AF 5 1 ANUFLEX UNIT - NATURAL TA90-0848-AF TA90-0848-

AF TA90-2272-

AF TA90-0579-

AF TA90-0809-

AF TA90-0577-

AF TA90-0577-AF

6 24 BODY STUDS TA90-0730 TA90-0730 TA90-5663 TA90-0487 TA90-0648 TA90-0659 TA90-0659 7 24 ELASTIC HEX NUTS TA90-0106 TA90-0106 TA90-0106 TA90-0108 TA90-0110 TA90-0111 TA90-0111 *8 1 UPPER PISTON I.D. SEAL

(POLYMERIC STYLE SEAL) TA90-1105 TA90-1105 TA90-1110 TA90-1099 TA90-1113 TA90-1097 TA90-1097

**8A 1 UPPER PISTON I.D. SEAL (HARD BAND SEAL)

---- ---- ---- ---- ---- TA90-1097-HB

TA90-1097-HB

*9 1 LOWER PISTON I.D. SEAL (STANDARD)

TA90-1000 TA90-1000 TA90-1002 TA90-1101 TA90-1152 TA90-0770 TA90-0770

9-A ****

1 LOWER PISTON I.D. SEAL ( NEW STYLE)

TA90-1000 TA90-1000 ---- ---- ---- ---- ----

*10 2 O.D. PISTON SEAL TA90-0780 TA90-0780 TA90-1012 TA90-0765 TA90-1018 TA90-1029 TA90-1029 *11 1 UPPER I.D. ADAPTER SEAL TA90-1104 TA90-1104 TA90-1109 TA90-1098 TA90-1114 TA90-1096 TA90-1096 *12 1 LOWER I.D. ADAPTER SEAL TA90-1002 TA90-1002 TA90-1037 TA90-0761 TA90-0781 TA90-0771 TA90-0771 *13 1 O.D. ADAPTER SEAL. TA90-0408 TA90-0408 TA90-0784 TA90-0760 TA90-0783 TA90-0772 TA90-0772 *14 1 TOP ADAPTER SEAL TA90-0405 TA90-0405 1145 TA90-1095 TA90-1115 TA90-1094 TA90-1094 15 2 WEAR BAND - PISTON - O. D. TA90-0613 TA90-0613 TA90-0613 TA90-0613 TA90-0613 TA90-0613 TA90-0613 16 1 WEAR BAND - PISTON I.D.

(STANDARD) TA90-0613 TA90-0613 TA90-0613 TA90-0613 TA90-0613 TA90-0613 TA90-0613

16-A ****

1 WEAR BAND - PISTON I.D. (NEW STYLE )

TA90-2344 TA90-2344 ____ ____ ____ ____ ____

16-B ****

1 WEAR BAND - ADAPTER I.D. TA90-2344 TA90-2344 ____ ____ TA90-2344 TA90-2344 TA90-2344

17 2 HYDRAULIC PORT PLUG TH7154 TH7154 TH7154 TH7154 TA90-6328 TA90-6329 TA90-6329 18 2 SHACKLE TA90-0496 TA90-0496 TA90-0496 TA90-0494 TA90-0497 TA90-0497 TA90-0497 19 SET B-7 T. E. STUD 300-330 300-770 300-765 300-766 300-793 300-786 300-782 20 SET G-2 HEX NUT 300-703 300-705 300-705 300-705 300-709 300-705 300-707 * 1 SEAL KIT (OLD STYLE) TA90-5079 TA90-5079 TA90-5077 TA90-5075 TA90-5030 TA90-5070 TA90-5070

**** 1 SEAL KIT (NEW STYLE) TA90-5079-A

TA90-5079-A

---- ---- ---- TA90-5070-HB

TA90-5070-HB

7-1/16 X 3M - 7-1/16 X 5M - 9 X 3M 11 X 3M - 11 X 5M - 13-5/8 X 5M

TOWNSEND TYPE 90 ANNULAR BOPS ARE AVAILABLE WITH STANDARD PACKING UNITS OR THE PATENTED ANUFLEX STYLE UNIT. THE ANUFLEX INSERT HINGES AS THE RUBBER IS CLOSED AND OPENED. ANUFLEX PACKING UNITS HAVE A LONGER LIFE CYCLE.

NOTE: ITEMS 9-A & 16-A ARE FOR 6 X 3M AND 6 X 5M NEW STYLE TYPE 90 ANNULAR BOPS AND REQUIRE AN ADDITIONAL LOWER PISTON SEAL & THE 1" PISTON I. D WEAR BAND MATERIAL CHANGES TO 1/2" WEAR BAND MATERIAL. ITEM 16-B IS AN ADDITIONAL WEAR BAND ADDED TO ADAPTER I.D. AFTER 2005. ***ITEM NO # 8A- UPPER PISTON I.D. SEAL IS A HARD BAND SEAL INSTEAD OF A POLYMERIC TYPE SEAL.



432-381-8750

30

TOWNSEND TYPE 81 RAM ASSEMBLIES (COMPATIBLE WITH SHAFFER SENTINEL II & WSI STYLE RAM BLOCKS)

RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL

TM8150 CSO TM8150-RB TM8150-FS TM8150-TS

TM8151 1.660 TM8151-RB TM8151-FS TM8150-TS

TM8152 1.900 TM8152-RB TM8152-FS TM8150-TS

TM8153 2-1/16" TM8153-RB TM8153-FS TM8150-TS

TM8154 2-3/8" TM8154-RB TM8154-FS TM8150-TS

TM8155 2-7/8" TM8155-RB TM8155-FS TM8150-TS

TM8156 3-1/2" TM8156-RB TM8156-FS TM8150-TS

TM8169 4" TM8169-RB TM8169-FS TM8150-TS

TM8157 4-1/2" TM8157-RB TM8157-FS TM8150-TS

TM8160 5" TM8160-RB TM8160-FS TM8150-TS

TM8158 5-1/2" TM8158-RB TM8158-FS TM8150-TS

7-1/16" X 3/5M TYPE 81 MANUAL & HYDRAULIC

TOWNSENDS TYPE 81 RAM BLOCKS AND RAM RUBBERS ARE MANUFACTURED TO BE INTERCHANGEABLE WITH SHAFFER SENTINEL II AND WSI BLOWOUT PREVENTERS. SHAFFER SENTINEL STYLE I PREVENTERS WILL ADAPT TO TOWNSENDS RAM BLOCKS. TOWNSENDS RAM RUBBERS AND TOP SEALS ARE SPECIALLY FORMULATED FOR LONG ENDURANCE IN FIELD OPERATIONS. TOWNSEND TYPE 81 RAM BLOCKS AND RUBBERS ARE AVAILABLE IN 6 X 3M & 5M AND 9 X 3M & 5M, IN BOTH STANDARD AND OFFSET SIZES.

SHAFFER SENTINEL I & II & WSI are registered trademarks of their respective companies. Townsend International BOP is not affiliated with these companies.



432-381-8750

31

TOWNSEND TYPE 81 RAM ASSEMBLIES


TM8150-8 CSO TM8150-8RB TM8150-8FS TM8150-8TS

TM8151-8 1.660 TM8151-8RB TM8151-8FS TM8150-8TS

TM8152-8 1.900 TM8152-8RB TM8152-8FS TM8150-8TS

TM8153-8 2-1/16 TM8153-8RB TM8153-8FS TM8150-8TS

TM8154-8 2-3/8" TM8154-8RB TM8154-8FS TM8150-8TS

TM8155-8 2-7/8 TM8155-8RB TM8155-8FS TM8150-8TS

TM8156-8 3-1/2" TM8156-8RB TM8156-8FS TM8150-8TS

TM8169-8 4" TM8169-8RB TM8169-8FS TM8150-8TS

TM8157-8 4-1/2" TM8157-8RB TM8157-8FS TM8150-8TS

TM8170-8 5" TM8170-8RB TM8170-8FS TM8150-8TS

TM8158-8 5-1/2" TM8158-8RB TM8158-8FS TM8150-8TS

TM8159-8 6-5/8" TM8159-8RB TM8159-8FS TM8150-8TS

TM8160-8 7" TM8160-8RB TM8160-8FS TM8150-8TS

TM8161-8 7-5/8" TM8161-8RB TM8161-8FS TM8150-8TS

9" X 3M MANUAL & HYDRAULIC


TM8150 CSO TM8150-RB TM8150-FS TM8150-TS

TM8151 1.660 TM8151-RB TM8151-FS TM8150-TS

TM8152 1.900 TM8152-RB TM8152-FS TM8150-TS

TM8153 2-1/16" TM8153-RB TM8153-FS TM8150-TS

TM8154 2-3/8" TM8154-RB TM8154-FS TM8150-TS

TM8155 2-7/8" TM8155-RB TM8155-FS TM8150-TS

TM8156 3-1/2" TM8156-RB TM8156-FS TM8150-TS

TM8169 4" TM8169-RB TM8169-FS TM8150-TS

TM8157 4-1/2" TM8157-RB TM8157-FS TM8150-TS

TM8160 5" TM8160-RB TM8160-FS TM8150-TS

TM8158 5-1/2" TM8158-RB TM8158-FS TM8150-TS

7-1/16" X 5M HYDRAULIC (ONLY)



432-381-8750

32

TOWNSEND TYPE 81 OFFSET RAM ASSEMBLIES

7-1/16" X 5M MANUAL & HYDRAULIC - OFFSET


TM8162 1.660 TM8162-RB TM8162-FS TM8150-TS

TM8163 1.900 TM8163-RB TM8163-FS TM8150-TS

TM8164 2-1/16" TM8164-RB TM8164-FS TM8150-TS

TM8165 2-3/8" TM8165-RB TM8165-FS TM8150-TS

TM8166 2-7/8" TM8166-RB TM8166-FS TM8150-TS


TM8162-8 1.660 TM8162-8RB TM8162-8FS TM8150-8TS

TM8163-8 1.990 TM8163-8RB TM8163-8FS TM8150-8TS

TM8164-8 2-1/16" TM8164-8RB TM8164-8FS TM8150-8TS

TM8165-8 2-3/8" TM8165-8RB TM8165-8FS TM8150-8TS

TM8166-8 2-7/8" TM8166-8RB TM8166-8FS TM8150-8TS

TM8167-8 3-1/2" TM8167-8RB TM8167-8FS TM8150-8TS

9" X 3M MANUAL & HYDRAULIC - OFFSET


TM8162 1.660 TM8162-RB TM8162-FS TM8150-TS

TM8163 1.900 TM8163-RB TM8163-FS TM8150-TS

TM8164 2-1/16" TM8164-RB TM8164-FS TM8150-TS

TM8165 2-3/8" TM8165-RB TM8165-FS TM8150-TS

TM8166 2-7/8" TM8166-RB TM8166-FS TM8150-TS

7-1/16" X 3M MANUAL & HYDRAULIC - OFFSET



432-381-8750

33

TOWNSEND 7-1/16 X 3/5M TYPE 81 REDA-CABLE RAM ASSEMBLIES

7-1/16" X 3/5M TYPE 81 REDA-CABLE RAM BLOCKS

RAM ASSEMBLY REDA-CABLE SIZE RAM BLOCK FACE SEAL TOP SEAL

TM8154-RCF2 2-3/8" FLAT-1.900" TM8154-RCF2B TM8154-RCF2R TM8150-TS






TM8154-RCR2 2-3/8" ROUND-1.250" TM8154-RCR2B TM8154-RCR2R TM8150-TS


TM8154-RCR6 2-3/8" ROUND1.000" TM8154-RCR6B TM8154-RCR6R TM8150-TS




TOWNSENDS TYPE 81 REDA-CABLE RAM BLOCKS AND RAM RUBBERS ARE AVAILABLE IN 2-3/8" & 2-7/8" FOR BOTH FLAT AND ROUND REDA-CABLE .

REDA-CABLE SLOT "FLAT OR ROUND"

ROUND REDA-CABLE

FLAT REDA-CABLE

FLAT REDA-CABLE

NO. SIZE

2 1.90"

4 1.625"

6 1.50"

ROUND REDA-CABLE

NO. SIZE

2 1.25"

4 1.125"

6 1.00"



432-381-8750

34

TOWNSEND TYPE 88 RAM ASSEMBLIES (COMPATIBLE WITH SHAFFER TYPE 64 STYLE RAM BLOCKS)

TOWNSENDS TYPE 88 RAM ASSEMBLIES ARE MANUFACTURED TO BE INTERCHANGEABLE WITH SHAFFER LWP STYLE BLOWOUT PREVENTERS. TOWNSENDS RAM RUBBER ARE NOT INTERCHANGEABLE WITH SHAFFER TYPE 64 BLOCKS. TOWNSENDS TYPE 81 FACE SEALS AND TOP SEALS ARE INTERCHANGEABLE WITH TYPE 88 RAMS.

7-1/16" X 3M HYDRAULIC


TH8150-88-6 CSO TH8150-88RB-6 TM8150-FS TM8150-TS

TH8151-88-6 1.660 TH8151-88RB-6 TM8151-FS TM8150-TS

TH8152-88-6 1.900 TH8152-88RB-6 TM8152-FS TM8150-TS

TH8153-88-6 2-1/16" TH8153-88RB-6 TM8153-FS TM8150-TS

TH8154-88-6 2-3/8" TH8154-88RB-6 TM8154-FS TM8150-TS

TH8155-88-6 2-7/8" TH8155-88RB-6 TM8155-FS TM8150-TS

TH8156-88-6 3-1/2" TH8156-88RB-6 TM8156-FS TM8150-TS

TH8169-88-6 4" TH8169-88RB-6 TM8169-FS TM8150-TS

TH8157-88-6 4-1/2" TH8157-88RB-6 TM8157-FS TM8150-TS

TH8170-88-6 5" TH8160-88RB-6 TM8160-FS TM8150-TS

TH8158-88-6 5-1/2" TH8158-88RB-6 TM8158-FS TM8150-TS



432-381-8750

35

TOWNSEND TYPE 88 RAM ASSEMBLIES (COMPATABLE WITH SHAFFER TYPE 64 STYLE RAM BLOCKS)

9" X 3M HYDRAULIC RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL

TH8150-88-9 CSO TH8150-88RB-9 TM8150-8FS TM8150-8TS

TH8151-88-9 1.660 TH8151-88RB-9 TM8151-8FS TM8150-8TS

TH8152-88-9 1.900 TH8152-88RB-9 TM8152-8FS TM8150-8TS

TH8153-88-9 2-1/16" TH8153-88RB-9 TM8153-8FS TM8150-8TS

TH8154-88-9 2-3/8" TH8154-88RB-9 TM8154-8FS TM8150-8TS

TH8155-88-9 2-7/8" TH8155-88RB-9 TM8155-8FS TM8150-8TS

TH8156-88-9 3-1/2" TH8156-88RB-9 TM8156-8FS TM8150-8TS

TH8169-88-9 4" TH8169-88RB-9 TM8169-8FS TM8150-8TS

TH8157-88-9 4-1/2" TH8157-88RB-9 TM8157-8FS TM8150-8TS

TH8170-88-9 5" TH8170-88RB-9 TM8170-8FS TM8150-8TS

TH8158-88-9 5-1/2" TH8158-88RB-9 TM8158-8FS TM8150-8TS

TH8159-88-9 6-5/8" TH8159-88RB-9 TM8159-8FS TM8150-8TS

TH8160-88-9 7" TH8160-88RB-9 TM8160-8FS TM8150-8TS

TH8161-88-9 7-5/8" TH8161-88RB-9 TM8161-8FS TM8150-8TS

7-1/16" X 3M HYDRAULIC OFFSET RAMS


TH8162-88-6 1.660 TH8162-88RB-6 TM8162-FS TM8150-TS

TH8163-88-6 1.900 TH8163-88RB-6 TM8163-FS TM8150-TS

TH8164-88-6 2-1/16" TH8164-88RB-6 TM8164-FS TM8150-TS

TH8165-88-6 2-3/8" TH8165-88RB-6 TM8165-FS TM8150-TS

TH8166-88-6 2-7/8" TH8166-88RB-6 TM8166-FS TM8150-TS

TH8167-88-6 3-1/2" TH8167-88RB-6 TM8167-FS TM8150-TS

9" X 3M HYDRAULIC OFFSET RAMS RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL

TH8162-88-9 1.660 TH8162-88RB-9 TM8162-8FS TM8150-8TS

TH8163-88-9 1.900 TH8163-88RB-9 TM8163-8FS TM8150-8TS

TH8164-88-9 2-1/16" TH8164-88RB-9 TM8164-8FS TM8150-8TS

TH8165-88-9 2-3/8" TH8165-88RB-9 TM8165-8FS TM8150-8TS

TH8166-88-9 2-7/8" TH8166-88RB-9 TM8166-8FS TM8150-8TS

TH8167-88-9 3-1/2" TH8167-88RB-9 TM8167-8FS TM8150-8TS



432-381-8750

36

TOWNSEND TYPE 99 RAM ASSEMBLIES (COMPATIBLE WITH SHAFFER CHASOVOY RAM BLOCKS)

7-1/16" X 3M TYPE 99 HYDRAULIC SIZE RAM ASSEMBLY RAM BLOCK FACE SEAL TOP SEAL

CSO TH99150-AS TH99150-RB TH99150-FS TH99150-TS

1.660 TH99151-AS TH99151-RB TH99151-FS TH99150-TS


2-1/16" TH99153-AS TH99153-RB TH99153-FS TH99150-TS




4" TH99157-AS TH99157-RB TH99157-FS TH99150-TS


5" TH99159-AS TH99159-RB TH99159-FS TH99150-TS



TOWNSENDS TYPE 99 Ram Assembly is manufactured to operate in both Hydraulic and Manual operated blowout preventers. TOWNSEND'S TYPE 99 Ram Block is interchangeable with Shaffer's Chasovoy Ram Block. TOWNSEND'S Ram Rubber is specially formulated for longevity in high pressure

NOTICE: TOWNSEND is not affiliated with Shaffer. Shaffer and Chasavoy are registered trademarks of Shaffer.

7-1/16" X 3M HYDRAULIC OFFSET RAMS

SIZE RAM ASSEMBLY RAM BLOCK FACE SEAL TOP SEAL








432-381-8750

37

TOWNSEND TYPE 39 & 48 RAM RUBBERS (COMPATIBLE WITH SHAFFER TYPE 39, A, B, E, & LWS BOPS)

O.D. PIPE

INCHES

6 x 3M Type 39

8 x 3M 8 x 5M Type 39

10 x 3M Type 39

10 x 5M Type 48

13-5/8 x 3M 13-5/8" x 5M

Type 480

C.S.O. 192035-0 192213-0 192416-0 192616-0 192774-5

1.315 192040-0 192419-0

1.660 192043-0 192206-0 192422-0 192812-5

1.900 192046-0 192216-0 192826-0 193768-5

2-1/16 192116-0 192108-0 192822-0 192882-5

2-3/8 192049-0 192210-0 192425-0 192619-0 192722-5

2-7/8 192052-0 192222-0 192428-0 192622-0 192725-5

3-1/2 192055-0 192225-0 192431-0 192625-0 192728-5

4 192058-0 192228-0 192434-0 192628-0 192731-5

4-1/2 192061-0 192231-0 192440-0 192631-0 192734-5

5 192064-0 192237-0 192446-0 192637-0 192740-5

5-1/2 192067-0 192243-0 192452-0 192643-0 192743-5

6-5/8 192255-0 192464-0 192655-0 192755-5

7 192258-0 192467-0 192658-0 192758-5

7-5/8 192470-0 192661-0 192761-5

8-5/8 192473-0 192764-5

9-5/8 192767-5

10-3/4 192773-5

11-3/4 192873-5

RETAINER SCREW Fits All

Pipe Sizes 192034 192034 192034 192034 192034

BOP TYPE

A, B, E, 39

A, B, E, 39

A, B, E, LWS, 39

A, B, E, LWS, 39

A, B, E, LWS

TOWNSENDS Type 39 & Type 48 Ram Rubbers are molded so they can be installed with either side facing up. TOWNSENDS Type 390 & 480 Ram Rubbers have a metal spring molded into one side of the back strap to force the rubber to flow upward when under pressure. This Ram Rubber can only be installed one way.

SHAFFER is a registered trademark of The Shaffer Co.



432-381-8750

38

TOWNSEND TYPE 39 & 48 RAMS & CARRIERS (COMPATIBLE WITH SHAFFER TYPE B, E, & LWS BOPS)

RAM SIZE 10 x 3M TYPE 39 11 x 5M TYPE 48 12 x 3/5M TYPE 48

O.D. PIPE SIZE

RAM BLOCK

RAM BLOCK SUB ASSEMBLY

RAM BLOCK


RAM BLOCK


C.S.O. 192415 192474 192615 193640 192719 192830

2-3/8 192424 192477 192618 193641 192721 192831

2-7/8 192427 192478 192621 193642 192724 192832

3-1/2 192430 192479 192624 193643 192727 192833

4 192433 192480 192627 193644 192730 192834

4-1/2 192439 192482 192630 193645 192733 192835

5 192445 192484 192636 193647 192739 192837

5-1/2 192451 192486 192642 193649 192742 192838

6-5/8 192654 193653 192754 192842

7 192657 193654 192757 192643

7-5/8 192660 193655 192760 192844

8-5/8 192763 192845

9-5/8 192766 192846

10-3/4 192772 192848

RETRACTOR SCREW 192209 192209 192209 192209 192209 192209

RAM CARRIER 192414 192414 192614 192614 192718 192718


NOTE: Block Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber to Block Screws only.

TOWNSEND manufactures Ram Blocks and Carriers to fit Shaffer Type B, E, LWS, and SL Blowout Preventers. All TOWNSEND Ram Blocks and Carriers meet OEM requirements and are backed by material certification and traceability records. Each Block and Carrier is tested to ensure product reliability and strength. TOWNSEND Ram Rubbers are offered with Ram Sub Assemblies and are formulated with TOWNSENDS own elastomers to ensure strength and durability in field applications.



432-381-8750

39

TOWNSEND TYPE 82 RAM RUBBERS (COMPATIBLE WITH SHAFFER STYLE LWS BOPS)

TOWNSEND Type 82 Ram Rubbers are designed to fit Shaffer 7-1/16 x 3M, 5M, 10M, and 15M LWS Blowout Preventers. TOWNSENDS specially formulated 82 compound has been field tested and has proven to be superior to other styles available in the marketplace. TOWNSEND has specifically designed this Ram Rubber for long endurance under high pressure service operations. TOWNSEND also offers 7-1/16 offset and dual offset Ram Rubbers upon request. Both Ram Rubbers in a pair of dual offset Ram Rubbers have the same part number. Single offset Ram Rubbers have a different part number for the left and the right Ram Rubber. TOWNSEND Type 82 Ram Blocks and Retractor Screws are also available.


OD PIPE SIZE

PART NO.

SEE NOTE

CSO TM8250-7RR *

1.660 TM8251-7RR *

1.900 TM8252--7RR *

2-1/16 TM8253-7RR *

2-3/8 TM8254--7RR *

2-7/8 TM8255-7RR *

3-1/2 TM8256-7RR *

4 TM8269-7RR *

4-1/2 TM8257-7RR *

5 TM8260-7RR *

5-1/2 TM8258-7RR *

Retainer Screw TM82-5545 *

* NOTE: Standard pipe sizes that are available at most stocking locations. Other sizes stocked at TOWNSEND main warehouse locations.

* NOTE: Two Retainer Screws, Part #TM82-5545 are included with each Ram Rubber.

7" TYPE 82



432-381-8750

40

TOWNSEND TYPE 7" 82 RAM BLOCKS & CARRIERS (COMPATIBLE WITH SHAFFER LWS )

TOWNSEND Type 7" 82 Ram Blocks and Carriers are designed to fit Shaffer 6 LWS Blowout Preventers. All TOWNSEND Ram Blocks and Carriers are backed by TOWNSENDS own strict Quality Program that complies with ISO and API regulations. Each Block and Ram Carrier is supported by material certifications and traceability records. TOWNSEND also offers Type 7" 82 Ram Rubbers that have been specially formulated for long endurance and longevity under high pressure service operations. All TOWNSEND Ram Blocks and Carriers are made for H2S service. The Retractor Screws are the only items that have to be changed for H2S operations. TOWNSEND offers the Type 7" 82 Ram Block in standard pipe sizes and Offset and Dual Offset. Contact a TOWNSEND representative for a list of additional LWS Blowout Preventer replacement parts that are available.


6 TYPE 61 RAMS

PIPE SIZE

RAM BLOCK

RAM SUB ASSEMBLY

CSO TM8250-7RB TM8250-7SA

1.660 TM8251-7RB TM8251-7SA

1.900 TM8252-7RB TM8252-7SA

2-3/8 TM8254-7RB TM8254-7SA

2-7/8 TM8255-7RB TM8255-7SA

3-1/2 TM8256-7RB TM8256-7SA

4 TM8269-7RB TM8269-7SA

4-1/2 TM8257-7RB TM8257-7SA

5 TM8260-7RB TM8260-7SA

5-1/2 TM8258-7RB TM8258-7SA

H2S Trim Retractor Screw TM8211-7RS TM8211-7RS

Carrier TM8200-7RC TM8200-7RC

NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.



432-381-8750

41

TOWNSEND TYPE 82 (COMPATIBLE WITH SHAFFER LWS)

TOWNSEND manufactures replacement Type 82Ram Rubbers to fit Shaffer LWS Blowout Preventers. TOWNSENDs specially formulated compound was specifically designed for long endurance under high pressure service operations, for both deep land drilling and subsea service. TOWNSEND offers standard pipe and casing sizes at each of our store and agent locations for easy accessibility to our customers. Offset and dual bore pipe sizes are available upon special request.

O.D. PIPE

INCHES

11 X 3M TYPE 82

11 X 5M TYPE 82

13-5/8 X 3/5M TYPE 82

C.S.O. TM8250-113RR TM8250-115RR TM8250-13RR

1.315 ---- ---- ----

1.660 TM8251-113RR TM8251-115RR TM8251-13RR

1.900 TM8252-113RR TM8252-115RR TM8252-13RR

2-1/16 TM8253-113RR TM8253-115RR TM8253-13RR

2-3/8 TM8254-113RR TM8254-115RR TM8254-13RR

2-7/8 TM8255-113RR TM8255-115RR TM8255-13RR

3-1/2 TM8256-113RR TM8256-115RR TM8256-13RR

4 TM8269-113RR TM8269-115RR TM8269-13RR

4-1/2 TM8257-113RR TM8257-115RR TM8257-13RR

5 TM8260-113RR TM8260-115RR TM8260-13RR

5-1/2 TM8258-113RR TM8258-115RR TM8258-13RR

6-5/8 TM8259-113RR TM8259-115RR TM8259-13RR

7 TM8262-113RR TM8262-115RR TM8262-13RR

7-5/8 TM8261-113RR TM8261-115RR TM8261-13RR

8-5/8 TM8263-113RR TM8263-115RR TM8263-13RR

9-5/8 TM8264-13RR

10-3/4 TM8265-13RR

BOP TYPE LWS ** B & E LWS

** B & E SL, LWS ** B & E



432-381-8750

42

TOWNSEND TYPE 82 RAMS & CARRIERS (COMPATIBLE WITH SHAFFER TYPE LWS, SL BOPS)

RAM SIZE 11 x 3M TYPE 82 11 x 5M TYPE 82 13-5/8 x 5M TYPE 82

O.D. RAM RAM SUB RAM RAM SUB RAM RAM SUB

C.S.O. TM8250-113RB TM8250-113SA TM8250-115RB TM8250-115SA TM8250-13RB TM8250-13SA

2-3/8 TM8254-113RB TM8254-113SA TM8254-115RB TM8254-115SA TM8254-13RB TM8254-13SA



4 TM8269-113RB TM8269-113SA TM8269-115RB TM8269-115SA TM8269-13RB TM8269-13SA








9-5/8 TM8264-13RB TM8264-13SA

10-3/4 TM8265-13RB TM8265-13SA

H2S RETRACTOR

SCREW TM8211-11RS TM8211-11RS TM8211-11RS TM8211-11RS TM8211-11RS TM8211-11RS

RAM CARRIER TM8200-113RC ----- TM8200-115RC ----- TM8200-13RC ----

TOWNSEND manufactures Type 82 Ram Blocks to fit Shaffer Type LWS and TOWNSEND 82 Blowout Preventers. TOWNSEND offers this Block only in H2S Trim at Standard Trim prices. All TOWNSEND Ram Blocks are tested for strength and have supporting material certifications and traceability records. TOWNSEND also offers Offset and Dual Offset Blocks along with other pipe sizes not listed.


NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.



432-381-8750

43

TOWNSEND TYPE 75 RAMS & CARRIERS (COMPATIBLE WITH SHAFFER SL BOPS)

RAM SIZE 11 x 10M TYPE 75 13-5/8 x 10M TYPE 75

PIPE SIZE

RAM BLOCK

RAM ASSEMBLY

RAM BLOCK

RAM ASSEMBLY

C.S.O. 133110 133109 134206 134203

2-3/8 133130 133129 134226 134223

2-7/8 133135 133134 134231 134228

3-1/2 133053 133052 131843 131842

4 133056 133055 131846 131845

4-1/2 133059 133058 131736 131848

5 133062 133061 131721 131850

5-1/2 133065 133064 131853 131852

6-5/8 133168 133167 134269 134266

7 133173 133172 134274 134271

7-5/8 133178 133177 134279 134276

8-5/8 133189 133188 134289 134286

9-5/8 134294 134291

10-3/4 134299 134296

STANDARD RETRACTOR

SCREW 137881 137881 137881 137881

H2S RETRACTOR

SCREW

142061 (CSO - 7) 142065 (7-5/8 - 8-5/8)

142061 (CSO 7) 142065 (7-5/8 - 8-5/8) 142061 142061

RAM CARRIER 131685 131685 138180 138180

TOWNSEND manufactures Type 75 Ram Blocks and Carriers to fit Shaffer Type SL Blowout Preventers. All TOWNSEND Ram Blocks and Carriers are tested for strength, before distribution, to guarantee the customer a quality product. Each set of Blocks and Carriers meet API, ISO, and TOWNSENDS own strict Quality Programs. All Blocks and Carriers have material certifications and traceability records. TOWNSEND Ram Blocks, Carriers, and Ram Rubbers are made for H2S service. Retractor Screws are the only items that have to be changed from Standard Trim to H2S service. TOWNSEND also offers Ram Blocks and Ram Rubbers in Dual and Offset sizes. Contact a TOWNSEND representative for additional breakdown.


NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Retainer Screws only.



432-381-8750

44

TOWNSEND TYPE "ST" RAM RUBBERS

CAMERON and Type U are registered trademark of the Cameron Co.

O.D. PIPE 7-1/16 BORE 11 BORE 13-5/8 BORE 21-1/14 BORE

C.S.O. ST-19473-1 ST-19243-3 ST-19504-3 ST-40962-19

1.315 ST-19473-2 ST-19243-8 ST-31215-23

1.660 ST-19473-3 ST-19243-6 ST-31215-22

1.900 ST-19473-4 ST-19243-5 ST-31215-28

2-1/16 ST-19473-7 ST-19243-4 ST-31215-20

2-3/8 ST-19473-5 ST-19243-1 ST-31215-1 ST-40962-1

2-7/8 ST-19473-6 ST-19243-2 ST-31215-2

3-1/2 ST-19474-1 ST-19374-1 ST-31215-3 ST-40962-3

4 ST-19474-2 ST-19374-2 ST-31215-4 ST-40962-4

4-1/2 ST-19474-3 ST-19374-3 ST-31215-5 ST-40962-5

5 ST-19474-4 ST-19374-5 ST-31215-7 ST-40962-7

5-1/2 ST-19474-6 ST-19375-1 ST-31215-8 ST-40962-8

6-5/8 ST-19375-3 ST-31215-10 ST-40962-10

7 ST-19375-4 ST-31215-11 ST-40962-11

7-5/8 ST-19375-5 ST-19506-4 ST-40962-12

8-5/8 ST-19375-6 ST-19506-5 ST-40962-13

10-3/4 ST-38372 ST-40962-20

9-5/8 ST-19506-7 ST-40962-15

UPPER SEAL Fits All

Pipe Sizes ST-19475 ST-19270 ST-19517 ST-40972

16-3/4 BORE 21-1/4 x 2M

ST-38853-1 ST-19249-3

ST-38853-21

ST-38853-2

ST-31228-2

ST-38853-4 ST-31228-3

ST-38853-5 ST-31228-4

ST-38853-6 ST-31228-5

ST-38853-8 ST-31228-7

ST-38853-9 ST-31228-8

ST-38853-11 ST-31228-10

ST-38853-12 ST-31228-11

ST-38853-13 ST-31228-12

ST-38853-15 ST-31228-14

ST-38853-17 ST-31228-16

ST-38853-18 ST-31228-17

ST-38863 ST-19514

11-3/4 ST-614227-1 ST-38853-19 ST-31228-18 ST-40962-21

13-3/8 ST-38853-20 ST-19252-4 ST-40962-22

13-5/8 ST-31228-24 ST-40962-24

13-3/4 ST-31228-19

16 ST-31228-21 ST-40962-23

18-5/8 ST-31228-25

TOWNSENDS Type "ST" Ram Rubbers are specially formulated from a compound adaptable to most H2S gases. Years of experience and field tests have helped TOWNSEND produce a durable, long lasting product under severe working conditions. TOWNSEND boasts that its quality is as good as or better than the OEM product, at a competitive price. TOWNSEND also offers dual offset and offset Ram Rubbers upon request.



432-381-8750

45

TOWNSEND TYPE "ST" RAM BLOCKS

PIPE SIZE

7-1/16 x 3/5/10/15M 11 x 3/5/10M

RAM BLOCK ASSEMBLY RAM BLOCK ASSEMBLY RAM BLOCK ASSEMBLY

CSO ST-44102-01 ST-44226-01 ST-44118-01 ST-44233-01 ST-44147-01 ST-44244-01

1.660 ST-44102-03 ST-44226-05 ST-44118-02 ST-44233-02 ST-44148-05 ST-44244-04

1.900 ST-44102-04 ST-44226-06 ST-44118-03 ST-44233-03 ST-44148-07 ST-44244-27

2-3/8 ST-44102-05 ST-44226-08 ST-44118-05 ST-44233-05 ST-44148-01 ST-44244-19

2-7/8 ST-44102-06 ST-44226-09 ST-44118-06 ST-44233-06 ST-44148-02 ST-44244-06

3-1/2 ST-44104-01 ST-44226-10 ST-44119-01 ST-44233-07 ST-44149-01 ST-44244-07

4 ST-44104-02 ST-44226-11 ST-44119-02 ST-44233-09 ST-44149-02 ST-44244-08

4-1/2 ST-44104-03 ST-44226-12 ST-44119-03 ST-44233-10 ST-44149-03 ST-44244-09

5 ST-44104-04 ST-44226-13 ST-44119-05 ST-44233-13 ST-44150-02 ST-44244-11

5-1/2 ST-44104-07 ST-44226-14 ST-44120-01 ST-44233-14 ST-44150-03 ST-44244-12

6-5/8 ST-44120-03 ST-44233-17 ST-44150-05 ST-44244-22

7 ST-44120-04 ST-44233-18 ST-44151-01 ST-44244-14

7-5/8 ST-44120-05 ST-44233-19 ST-44151-02 ST-44244-15

8-5/8 ST-44120-06 ST-44233-20 ST-44151-03 ST-44244-16

9-5/8 ST-44151-05 ST-44244-17

10-3/4 ST-44152-01 ST-44244-18

11-3/4 ST-614208-01 ST-44244-26

13-5/8 x 3/5/10M

TOWNSEND Ram Block Part Number is for Block only. TOWNSEND Assembly Part Number is for Block, Top Seal, and Ram Rubber.

TOWNSEND manufactures replacement Ram Blocks for the Type "ST" Blowout Preventers. All TOWNSEND manufactured Blocks are made to OEM specifications and from certified materials. All Ram Blocks are tested and have traceability documentation, and meet ISO, API, and TOWNSENDS own Quality Programs. TOWNSEND offers the Type "ST" Ram Blocks in a variety of Preventer working pressures and pipe sizes.

CAMERON and Type U are registered trademarks of the Cameron Co.

NOTE: TOWNSEND manufactures the same series in Shear Ram Blocks. Contact a TOWNSEND representative for additional information.

ASSEMBLY

BLOCK



432-381-8750

46

TOWNSEND TYPE VBR RAM RUBBERS & BLOCKS

TOWNSENDS Variable Bore Ram Rubbers (VBR) are designed to seal around a variety of pipe sizes. TOWNSENDS also manufactures the VBR Ram Block in both 11 and 13-5/8 sizes to fit the "ST" Blowout Preventers. TOWNSENDS Finger Insert design rotates as the hydraulic pressure is applied and the Ram Blocks begin to close allowing the Ram Rubber to seal around a variety of pipe sizes and eliminating changing Ram Rubbers each time you change pipe size. TOWNSENDS VBR Rubbers have been field tested to confirm durability.

ITEM DESCRIPTION 11 5M/10M 13-5/8

5M/10M

1 Assembly 2-7/8 - 5 ST-645360-01 ST-645166-01

1 Assembly 4-1/2 7 ST-46675-01

2 Ram Block 2-7/8 - 5 ST-644836-01 ST-644744-01

2 Ram Block 4-1/2 - 7 ST-46671-01

3 VBR 2-7/8 - 5 ST-644926-01 ST-645089-01

3 VBR 4-1/2 - 7 ST-644924-01

4 Top Seal (All) ST-19270 ST-644223-02

CAMERON is a registered trademark.

Note: TOWNSEND VBR Rubbers and Top Seals do not fit Standard Type U Ram Blocks, but are interchangeable with OEM Rubbers & Blocks.

3

1

4

2



432-381-8750

47

TOWNSEND TYPE ST SHEAR RAM BLOCKS

TOWNSEND manufactures "SBR" style Ram Blocks and Ram Rubbers for TOWNSEND Type "ST" Blowout Preventers. (SBR Shear Blind Rams) TOWNSEND Type ST Shear Blind Ram Blocks meet OEM standards, and comply with TOWNSENDS own strict Quality Assurance Program. Each set of Ram Blocks are backed by material certifications and inspection documentation. All Ram Blocks are made from specified materials to ensure resistance to H2S gases.

7-1/16 x 5/10/15M

DESCRIPTION PART NO.

Right Side Packer Paddle ST-49358-01

Left Side Packer Paddle ST-49358-02

Combination Packer ST-49347-01

Lower Assembly ST-46792-02

Top Seal ST-19475

Upper Block ST-46210-01

Lower Block ST-46212-02

Upper Assembly ST-46792-01

11 x 5/10M


Right Side Packer ST-46751-04

Left Side Packer ST-46752-04

Blade Packer ST-46910-04


Top Seal ST-19270




13-5/8 x 5/10M


Right Side Packer ST-46751-01

Left Side Packer ST-46752-01

Blade Packer ST-46910-01


Top Seal ST-19517




NOTE: 7-1/16 x 5/10/15M Face Packer and Side Packer Rubbers are not illustrated in above view.

1 Right Side Packer 2 Left Side Packer 3 Blade Packer 4 Top Seal 5 Upper Block

4

5 1

2

CAMERON and Type U are registered trademark of the Cameron Co.



432-381-8750

48

TOWNSEND RETRACTOR SCREWS (COMPATIBLE WITH SHAFFER BOPS)

SERIES RAM BOP STANDARD H2S

7-1/16 x 5M 61 - 7" 82 LWS (61)135848 (61)135848

9 x 5M 61 LWS 135848 135848

7-1/16 x 5M 39 39 192033 192033-S

11 x 3M 39 39 192209 192209-S

11 x 5M 39 39 192209 192209-S

12 x 3M 48 39 192209 192209-S

13-5/8 x 5M 48 48 192209 192209-S

11 x 3M 39 A 192209 192209-S

11 x 5M 39 A 192209 192209-S

13-5/8 X 10M 75 SL 137881 142061

12 x 3M 39 A 192209 192209-S

11 x 3M 70 - 82 B, E, LWS (70) 135575 (70) 141200

11 x 5M 70 - 82 B, E, LWS 135575 (70) 141200

13-5/8 X 3M 70 - 82 B, E, LWS 135575 (70) 141200

13-5/8 x 5M 70 - 82 B, E, LWS 135575 (70) 141200

11 x 10M 75 SL (CSO 7) 137881 142061

11 x 10M 75 SL (7-5/8 - 8-5/8) 133081 142065

TOWNSEND manufactures Retractor Screws to fit all the different types of Shaffer Blowout Preventers. TOWNSENDS Retractor Screws are available in Standard Trim and H2S Trim. All TOWNSEND Retractor Screws are marked with a traceability number to guarantee product quality. Each Retractor Screw is backed up with traceability records and material certifications.

SHAFFER is a registered trademark of the Shaffer Co.

TOWNSEND also offers other Shaffer Blowout Preventer replacement parts for all the different style blowout preventers. Contact a TOWNSEND representative for a complete breakdown of other parts available.

TYPE 39

TYPE 70

TYPE 75



432-381-8750

49

TOWNSEND HINGE BRACKET ASSEMBLY (COMPATIBLE WITH SHAFFER LWS BOPS)

ITEM DESCRIPTION QTY 7-1/16 3M 7-1/16

5M 11 3M

11 5M

13-5/8 3/5M

-- Hinge Pin Diameter (in.) __ 1-1/2 1-1/2 1-1/2 1-3/4 1-7/8

1 Hinge Bracket 1 TH7144 TH7144 TH7144 TH7144-11-5 TH7144-13

2 Hinge Pin 1 TH7151 TH7151 TH7151-11 TH7151-11-5 TH7151-13

3 Hinge Pin Plug 2 TH7113 TH7113 TH7113 TH7113 TH7113

4 O-Ring, Hinge Pin 10 TH7152 TH7152 TH7152 TH7152-11-5 TH7152-13

5 Cap Screw, Hinge Brkt. Sm. 4 (2) TH7146 TH7146 TH7146 TH7146-11-5 TH7146-11-5

6 Plug, Hinge Bracket 4 TH7154 TH7154 TH7154 TH7154 TH7154

7 Dowel Pin 2 TH7145 TH7145 TH7145 TH7145-11-50 TH7145-11-5

8 Retainer, Hinge Pin 1 TH7153 TH7153 TH7153 TH7153 TH7153

9 Grease Fitting 1 TH7155 TH7155 TH7155 TH7155 TH7155

5 Cap Screw, Hinge Brkt Lg. 2 TH7147 ----- ----- ----- -----

SHAFFER and LWS are registered trademarks of the Shaffer Co.

TOWNSEND manufactures replacement Hinge Brackets and Hinge Pins to fit Shaffer 7-1/16 x 3M through 13-5/8 x 5M LWS Blowout Preventers. TOWNSEND also offers an exchange program for used Hinge Brackets and offers rebuilt Hinge Brackets at a discounted price.

1

2

3

4

5

6

7

8

9



432-381-8750

50

TOWNSEND ST METAL REPLACEMENT PARTS

TOWNSEND manufactures all the metal expendable parts to fit a TOWNSENDS ST Blowout Preventer. All TOWNSEND expendable metal replacement parts meet API, ISO, and TOWNSENDS own strict Quality Programs. All parts are stamped for material traceability requirements.

All TOWNSEND replacement parts meet OEM requirements, and are plated with correct alloys for each components operating requirements.

TOWNSEND stocks a large inventory of metal replacement parts for immediate distribution.

1 Operating Piston 2 Operating Cylinder 3 Ram Change Piston Open 4 Ram Change Piston Close 5 Ram Change Cylinder 6 Locking Screw

3 6 1

5

4 2

* O/S denotes Old Style Operating Piston CAMERON & Type U are registered trademark of The Cameron Co.

SERIES OPERATING PISTON * OPERATING CYLINDER

RAM CHANGE PISTON (OPEN)

RAM CHANGE PISTON (CLOSE)

RAM CHANGE CYLINDER

LOCKING SCREW

7-1/16 x 3/5M ST-30320 (O/S) ST-667940 ST-30274-2 ST-30324 ST-30325 ST-30273-2 ST-30326


11 x 3/5/10M ST-30364 (O/S) ST-673178 ST-30274-3 ST-30362 ST-30363 ST-30273-3 ST-30365

12 x 3M ST-30311 (O/S) ST-679816 ST-30274-1 ST-30310 ST-30309 ST-30273-1 ST-30307

13-5/8 x 5M ST-30311 (O/S) ST-679816 ST-30274-1 ST-30310 ST-30309 ST-30273-1 ST-30307


16-3/4 x 5M ST-38846 (O/S) ST-689562 ST-30274-6 ST-38847 ST-30848 ST-30273-6 ST-38901

20 x 2/3M ST-30847 (O/S) ST-690058 ST-30274-4 ST-30848 ST-30849 ST-30273-4 ST-30846

TOWNSEND "ST" TYPE BLOWOUT PREVENTER



432-381-8750

51

CAMERON, HYDRIL, SHAFFER, SENTINEL and WSI are registered trademarks.

TOWNSEND BOP BONNET REBUILD KITS (COMPATIBLE WITH SHAFFER, HYDRIL & TOWNSEND BOPS)

TOWNSEND manufactures all the replacement parts for most major Blowout Preventers, such as TOWNSEND, Cameron, Shaffer, Hydril, and WSI. To simplify ordering replacement parts, TOWNSEND has assembled Bonnet Rebuild Kits for Blowout Preventers. These kits consist of all the necessary components to rebuild a Blowout Preventer Bonnet, excluding the Door Seal, which is sold separately. TOWNSENDS Kits consist of all the ORings, Lip Seals, Springs, and necessary Washers to rebuild a Bonnet. Major metal goods, such as Ram Shafts, Locking Screws, Pistons, and major brass components usually need not be replaced, and are offered separately.

SHAFFER SENTINEL I STYLE

SERIES KIT NO.

7-1/16 x 3M HYD. 830000

7-1/16 x 3M MAN. 831000

TOWNSENDS Bonnet Rebuild Kit cannot be compared with kits offered by OEMs. TOWNSENDS Kits exclude major expense items that usually do not need replacing. Each TOWNSEND Bonnet Rebuild Kit comes with an exploded view of the Bonnet with a listing of parts included in each Kit.

SHAFFER TYPE B BOP

SERIES KIT NO.

7-1/16 x 3/5M 860000

8 x 3/5M 860000

11 x 3/5M 860000

13-5/8 x 3M 860000

14 x 5M 860000

16 x 2M 860000

SH

Townsend Catalog

Documents

annuram type

shaffer type

ram preventer type

annuram bop

shaffer style lws ram

double bop

hydrils type gk annular

hydraulic bop

Maureen Townsend

Capitulo Townsend

12230 Townsend Ch1

Townsend Post 20

Turner & Townsend Confidential II Turner &Townsend

Maureen Townsend MOVEU

260 townsend

Louisa Jane Townsend...

fl.)! 7J;;;i/l(~ · Radhika Karmaka Allen Kohler, Townsend,...

Townsend Elementary

Humanlife.com townsend

RAMSAUER - TOWNSEND EFFECT