Tk083q Pneumatic & Electric POWER TOOLS - Nitto Kohki€¦ · · 2015-12-10MACHINE TOOLS SAFETY GUIDE Pneumatic & Electric Power Tools, ... PNEUMATIC RECIPROCATING SANDER LINE SANDER

POWER TOOLS

Tk083q

Pneumatic & Electric

GENERAL CATALOG

NEEDLE SCALER

JET CHISEL

Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machinesand pneumatic hand tools are among thefinest precision engineered equipmentto be found today.

SPRING BALANCERQUICK CONNECT COUPLINGSMACHINE TOOLSSAFETY GUIDE

Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency! Manufacturing

Various peening works

Rivet calking, bushinserting & removing

-

-

Sanding, grinding,chamfering, finishing

Metal working,surface smoothing

Trimming, chamferingcorner rounding

Smoothing,intermediate finishsanding

Surface sanding,rust & stain removal

Plane sanding,groove sanding

Precision filing offlash, chamfering,sanding, groovefinishing

Cuts with small radii

Various drilling works

Chamfering of largeworkpieces

Paint & rust scaling

Sheet metal cutting,paint chiseling, rivetpunching

-

-

-

Chamfering, roughgrinding, moldgrinding

Various grinding work

Spot smoothing,surface regulation,finish sanding

Surface smoothingof steel products,finishing of pressedproducts

Spot smoothing,corner rounding,surface smoothing

Spot smoothing,surface regulation

Trimming, filing innarrow space,surface regulation

Deburring of machinedparts

Trimming, filing in narrow space

Cutting of mild steelplates, aluminum,plastics and othermaterials

Various drilling works

Removing burrs lefton machines holes

Removing burrs lefton machines holes

-

Precision filing offlash, chamfering,groove finishing

Sheet-Metal Working

1

AIR HAMMER

AUTO CHISELPNEUMATIC SCALER

SUPER KELENPNEUMATIC CHIPPING HAMMER

AIR CHIPPERPNEUMATIC GRINDER AND SANDER

MYTONPNEUMATIC DIE GRINDER

AIR SONICPNEUMATIC HACKSAW

SUPER SAWPORTABLE PRECISION FINISHING FILE

SUPER HANDPORTABLE PRECISION FINISHING FILE

SUPER HAND LIGHTPORTABLE FINE FINISHING FILE

MICRO AIR HANDPNEUMATIC BELT SANDER

BELTON/BABY BELTONHANDY PNEUMATIC SANDER

FREE SANDERPNEUMATIC RECIPROCATING SANDER

LINE SANDERPNEUMATIC COMPACT SANDER

ORBITAL SANDERPALM ORBITAL SANDERPNEUMATIC HAND DRILL

AIR DRILLPNEUMATIC DEBURRING TOOL

BURR CUTTERPORTABLE CHAMFERING TOOLS

BEVELER

Page

3 - 4

5 - 6

7

8

9 - 10

11 - 12

12

13

14

14

15 - 16

17

18

19

20

20

21 - 24

25

26 - 28

29

30

Spatter, chips &sludge scaling

Flux chiseling,plaster chiseling

Spatter, sludge andrust chiseling, scaling

-

Bead grinding, crosssection grinding

Bead grinding

Bead grinding, rust removal,chamfering,section finishing

Surface sanding ofpre-welded part

-

-

-

Finish filing

-

Initial boring for gascutting by welder

Surface chamfering ofpre-welded shaped steel parts

-

-

Paint chiseling

Paint chiseling

Paint chipping

Grinding of pre-painted surface,buffing

Pre-painted surfaceregulation

Rough grinding, rust& paint removal,spot smoothing

Ground work sanding

Sanding of pre-painted, plasteredsurface, water sanding

Sanding of plasteredsurface, intermediatefinish sanding

Precision filing ofpre-painted surface,sanding

-

- -

Paint scrambling(w/attachment)

Chamfering of steelplate

Sand blasting &chiseling

Trimming, sandchiseling

Black surface scaling,scaling of ingotremnant in ladle

Sand chipping

Trimming, chamfering

Mold correction,trimming

Trimming,chamfering,spatter grinding,die-cast finishing

Trimming, surfacefinishing of die-casting

Mold correction

Mold correction

Trimming

-

-

Chamfering of castmolds

Removing burrs lefton holes

Rust scaling,welded-part finish

Various automotiverepair works

Removal of weeds,shells, concretechipping

Removal of weeds,shells, etc., concretechipping

Additional grinding,rust removal, surfacesmoothing

Precision grindingof parts

Welding chip grinding,finish grinding, fitting

Correction of grinding(finish works)

Paint sanding ofautomotive body

Paint sanding ofautomotive body

Trimming, precisionsanding of parts

Cutting of body panelsof automotive vehiclesor shaped steel

Drilling, removal ofspot-welded parts

Chamfering of steelplate

-

-

-

-

-

Grinding of pipecross section andinner surface

Grinding of pipe &equipment surfaceface section

Precision finishing

Sanding of plasteredsurface, and test piecesurface

Synthetic resin sanding

Filing, superfine filingfor profile correction

Deburring of die-castaluminum products


Trimming Trimming, precisionsanding of parts


Cutting of fiber plates.Cutting of fiber-reinforced plastic plates

-

--

-

-

-

-

-

Sanding

Correction grindingof molded products,rough grinding

Finish sanding offurniture, profilecorrection of plasticproducts

Precision sanding

Finish sanding, curvedsurface sanding,sanding of routergroove

Rough finish sanding


-

-

Drilling

-

Surface coarsening ofstone and concreteproducts

Concrete breaking,chiseling of stick

Concrete chiselingfrom framework,removal of linoleumfrom floor base

Chipping of stoneproducts

Chamfering of stoneproducts, honing

Additional grindingof constructionmaterials & parts

Grinding of parts &elements, repairservices of tools

Surface sanding ofconstructed materials

Sanding of stoneproducts and floormaterials

Inner surface sandingof channeled parts

Correction sanding ofmetal parts

-

-- -

-

- - - -

Sash works

Chamfering of columns(HB-15B)

Welding Painting Metal Casting &Forging

Automotive &Ship Building Chemical Engineering Wood Working & Art Construction

CONTENTS

2

Powerful scaling with multi-needles

・ Quickly and efficiently removes weld slag, rust, paint and scale from most surfaces

・ Ideal for cleaning and descaling steel, bridgework, castings, brick, stone and many other materials

・ Heavy-duty construction for industrial and maritime applications

・ Proven superior design features with no internal spring components ensure trouble-free performance

Specifications

Accessories Included

MPa {kgf/cm2}

m3/min

min-1

kg

AJC-16

0.6 {6}

0.07

6,000

3 pieces of 3 mm × 180 mm


3/8

0.98

Model

Air Pressure

Air Consumption (No load)

Stroke Speed

Standard Needles with Machine

Optional Needle Size

Hose Size

Mass (Weight)

JT-20

0.6 {6}

0.2

4,000



3/8

2.4

JEX-20

0.6 {6}

0.2

4,000



3/8

2.75

• 3 pieces of 3 mm × 180 mm Needle• Bushing R 3/8 × NPT 3/8• Hose Nipple R 3/8 × 3/8



Slim TypeAJC-16ModelMedium Duty TypeJT-20Model

NEEDLE SCALER JET CHISEL SCALING

JEX-20Model Reduced VibrationType

208 mm263 mm 261 mm

JET CHISEL

Reinforcement of a welded part with the shot peening effect increases strength by imparting residual stress to the surface of the workpiece through the high speed impact of the needles. Highly suitable for effective reinforcement of deteriorated welded parts.

Shot Peening Effect Full Automatic Systemwithout springs. This means no springs to break...no irregular power... and the advantage of low air consumption.

Features

3

NEEDLE SCALER JET CHISELSCALING

Electric Needle Scaler

Optional Needles

EJC-32A

Model

Air Pressure


Stroke Speed



Hose Size

Mass (Weight)

Model

Specifications


MPa{kgf/cm2}

m3/min

min-1

inch

kg

JC-16

0.15

4,000


N/A

1.4

JEX-24

0.27

4,000




2.7

JEX-2800A

0.43

3,700




3.3

JEX-28

0.35

4,500




3.5


• 6 mm Hex. Socket Screw Key• Bushing R 3/8 × NPT 3/8• Hose Nipple R 3/8 × 3/8

Accessories Included• 15 pieces of 3 mm × 180 mm Needle• 6 mm Hex. Socket Screw Key

• Needle Supporter 4 mm• 14 pieces of 4 mm × 180 mm Needle• 6 mm Hex. Socket Screw Key• Bushing R 3/8 × NPT 3/8• Hose Nipple R 3/8 × 3/8

• Needle Supporter 4 mm• 14 pieces of 4 mm × 180 mm Needle• Bushing R 3/8 × NPT 3/8• Hose Nipple R 3/8 × 3/8

UniversalTypeJEX-24Model Heavy-duty

TypeJEX-28Model JEX-2800AModel

・ Powerful 300 watt double insulated motor・ Extended length, slim barrel design・ Adjustable front handle for operator comfort and convenience

Premium Nitto Kohki needles out-perform competitors’ needles ensuring optimal performance and trouble-free operation.

PN Description Sales UnitTA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221

100 pcs./set100 pcs./set50 pcs./set50 pcs./set100 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set

Needle 2 mm × 150 mmNeedle 2 mm × 180 mmNeedle 2 mm × 300 mmNeedle 2 mm × 500 mmNeedle 3 mm × 180 mmNeedle 3 mm × 300 mmNeedle 3 mm × 500 mmNeedle 3 mm × 800 mmNeedle 4 mm × 180 mmNeedle 4 mm × 300 mmNeedle 4 mm × 500 mm

Specifications

W

A

min

min-1

m

kg

115 V AC, 50/60 Hz

2.8

230 V AC, 50/60 Hz

1.4

EJC-32A

300

30

3,000



5

4.5

Model

Power Supply

Rated Power Consumption

Rated Current

Rated Duty

Stroke Speed



Power Cord Length

Mass (Weight)

JC-16Model LightweightType

158 mm 237 mm264 mm 247 mm

154 mm

516 mm

229 mm

167 mm180 mm

178 mm

Low-vibration Type

PN Description Sales Unit ModelTP00338TP00337TQ05210TQ04554TP00290TP02244TP02245TP01499TP01461TP01462TP16475TP16301

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

JT-20,JEX-20

AJC-16

JEX-24

EJC-32A

JEX-28,JEX-2800A

JC-16

Needle Supporter 2 mmNeedle Supporter 3 mmNeedle Supporter 2 mmNeedle Supporter 3 mmNeedle Supporter 2 mmNeedle Supporter 2 mmNeedle Supporter 3 mmNeedle Supporter 2 mmNeedle Supporter 3 mmNeedle Supporter 4 mmNeedle Supporter 2 mmNeedle Supporter 3 mm

230 V AC only

0.6 {6}

3/8

4

SCALING

A special spool valve inside gripassures excellent durability

Model

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

inch

kg

A-300

0.6 {6}

0.3

2,600

1/4

1.7

Model

Air Pressure


Stroke Speed

Hose Size

Mass (Weight)• Bushing R 1/4 × NPT 1/4 : 1 pc.• Hose Nipple R 1/4 × 1/4 : 1 pc.

A-300

Optional AttachmentsPN Description Sales Unit PN Description Sales Unit

TP00572TP00573TP04606TP00575TP00576TP00577TP00578TP00579TP00580TP00581TP00582TP00583

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.1001 Blank ChiselNo.1002 Flat Chisel No.1003 Sheet Metal Chisel ANo.1004 Sheet Metal Chisel B No.1005 Silencer Cutting ChiselNo.1006 Rubber Bushing Remover No.1007 Spot Weld BoosterNo.1008 Bushing ToolNo.1009 PunchNo.1010 Bushing Removing ToolNo.1011 Sheet Metal PunchNo.1012 20 mm Bending Chisel

TP00584TA90051TP00586TP00585TP00589TP00590TP00591TP04995TP05244TP05775TP05801

-

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.-

No.1013 Fork Chisel 24No.1014 Panel CrimperNo.1016 Fork Chisel 35No.1017 Fork Chisel 15No.1018 38 mm ScraperNo.1019 60 mm ScraperNo.1020 60 mm Concave ScraperNo.1023 Sheet Metal Chisel CNo.1024 Moilpoint ChiselNo.1025 Rivet Removing PunchNo.1026 Rivet Caulking Chisel -

185 mm

160 mm

AIR HAMMER AUTO CHISEL

AUTO CHISEL

・Designed for speeding up the repair and sheet metal works of automobiles, etc.

・Enables hammering work in narrow spaces

・Durable and powerful action

・Fast and easy chisel change to reduce downtime

・A wide variety of chisels available

Features

5

SCALING

Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs

No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins

No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast

No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel

No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping

No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time

No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins

No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion

No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races

No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings

No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets

No. 1012 20 mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds

No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints

No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.

No. 1016 Fork Chisel 35 (TP00586)Disconnecting tie rod end ball joints

No. 1017 Fork Chisel 15 (TP00585)Disconnecting tie rod end ball joints

No. 1018 38 mm Scraper (TP00589)Peeling paint & removing rust from iron plate

No. 1019 60 mm Scraper (TP00590)Peeling paint & removing rust from iron plate

No. 1020 60 mm Concave Scraper (TP00591)Removing incrustation from pipe

No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast

No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings

No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars

No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars

AIR HAMMER AUTO CHISEL

6

SCALING

Industrial and shipboard pneumatic scalers

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

S-250

0.6 {6}

0.27

2,500

12.7

3/8

4.1

Model

Air Pressure


Stroke Speed

Shank Size

Hose Size

Mass (Weight)

S-500

0.6 {6}

0.27

2,500

12.7

3/8

4.7

S-1000

0.6 {6}

0.27

2,500

12.7

3/8

6.1

• No.2005 38 mm Bend Scraper (Installed)• Hose Lock Nut M16• Hose Nipple 3/8



Optional Chisels

PN Description Sales UnitTP03645TP03646TP03647TP04010TP04552TP04553TP04554

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.2001 60 mm ScraperNo.2002 38 mm ScraperNo.2003 Blank ChiselNo.2004 60 mm Concave ScraperNo.2005 38 mm Bend ScraperNo.2006 60 mm Concave Bend ScraperNo.2007 60 mm Bend Scraper2001 2002 2003 2004 2005 2006 2007

PNEUMATIC SCALER SUPER KELEN

SUPER KELEN

・Quickly and efficiently removes rust, scale, paint, tar and concrete from most surfaces

・Ideal for industrial, maritime and shipboard cleaning and descaling operations

・Idle protection system, tool will not activate unless contacting work surface

・S-1000 – over 1.3 m in length for extended reach applications and operator convenience

・One-touch chisel installation and removal – NO tools required

Features

S-1000Model

S-500Model

S-250Model

537 mm

797 mm

1,377 mm

7

SCALING

Removes weld splatter quickly and easily

Model

Air Pressure


Stroke Speed

Size of Chisel Shank

Hose Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

ACH-16

0.6 {6}

0.15

6,000

OD 10.5

3/8

0.9

CH-24

0.6 {6}

0.2

4,000

12.7 sq.

3/8

1.7

• TQ03431 Flat Chisel (Installed)• Bushing R 3/8 × NPT 3/8• Hose Nipple R 3/8 × 3/8

• TP15166 Curved Flat Chisel (Installed)• Bushing R 3/8 × NPT 3/8• Hose Nipple R 3/8 × 3/8

ModelACH-16Model CH-24

Optional Chisels PN Description Sales Unit

TQ03431TQ03453TQ03549TQ03452

TQ03452TQ03549TQ03453TQ03431

1 pc.1 pc.1 pc.1 pc.

Flat Chisel 20 × 120Curved Flat Chisel 20 × 120Flat Chisel 11 × 120Flat Chisel 20 × 180

PN DescriptionChisel for Air Chipper CH-24

Chisel for Air Chipper ACH-16

Sales UnitTP15234TP15233TP15166

TP15166TP15233TP15234

1 pc.1 pc.1 pc.

Straight Flat Chisel 12.7 × 165Flat Chisel 25 × 155Curved Flat Chisel 25 × 155

147 mm

184 mm

AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER

・Ideal tool for quickly and efficiently removing weld splatter, rust and other debris from most surfaces

・Compact, heavy-duty construction for tough industrial applications

・Easy one-touch chisel installation and removal – NO tools required

・Idle protection system, helps prevent accidental start-up “ACH-16” only

Features

8

GRINDING & SANDING

A wide variety of models are available to a particular job!

MLG-25Model

0.6 {6}

0.75 (No load) 1.1 (Load)

7,600

180

3/8

Model

Air Pressure


Free Speed

Depressed Center Grinding Wheel

Hose Size

Mass (Weight)

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

• 6 mm Hex. Socket Screw Key• 10 mm Hex. Socket Screw Key• Bushing R 3/8 × NPT 3/8• Handle Ass’y• Wheel Guard Ass’y


Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

MLG-25

0.6 {6}

0.42

19,000

58

1/4

0.6

MLG-40

0.6 {6}

0.45 (No Load) 0.91 (Load)

13,000

100

3/8

1.5

MAGW-40

0.6 {6}

0.68 (No load) 0.82 (Load)

13,000

100

3/8

1.55

Model

Air Pressure

Air Consumption

Free Speed

Depressed Center Grinding Wheel

Hose Size

Mass (Weight)

• Green Disc GS #80• 5 mm Hex. Socket Screw Key• 19 mm Single Ended Spanner• Bushing R 1/4 × NPT 1/4

• 6 mm Hex. Socket Screw Key• Bushing R 3/8 × NPT 3/8

• 6 mm Hex. Socket Screw Key• 17 mm Single Ended Spanner• Bushing R 3/8 × NPT 3/8

MAG-50

0.6 {6}

0.87

12,000

125

3/8

2.2

MLG-50

0.6 {6}

0.7

11,000

125

3/8

2.5

• Air Hose Sub Ass'y• Exhaust Hose Ass'y• Side Handle Ass'y• 4 mm Hex. Socket Screw Key• Pin Face Wrench• Bushing R 3/8 × NPT 3/8

MAGW-40Model

Depressed centerwheel 58 mm MLG-40

ModelDepressed centerwheel 100 mm

Depressed centerwheel 100 mm

133 mm 224.5 mm

66.5 mm 85.5 mm

219 mm

95 mm

PNEUMATIC GRINDER MYTON

MYTON

MAG-50Model

Depressed centerwheel 125 mm MLG-70

ModelDepressed centerwheel 180 mmMLG-70

ModelDepressed centerwheel 180 mmMLG-50

ModelDepressed centerwheel 125 mm

102 mm102 mm

238 mm256 mm

102 mm

270 mm

Lever Type Ring Type

MLG-70 Ring TypeMLG-70 Lever Type

2.252.45

221 mm

89 mm

• Handle Ass’y• Wheel Guard Ass’y• Hex. Socket Screw Key 6• Hex. Socket Screw Key 4• Pin Face Wrench• Bushing R 3/8 × NPT 3/8

9

MLS-20Model

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

inch

kg

MLS-20

0.6 {6}

0.42

19,000

1" , 1 - 1/2" and 2"

1/4

0.6

Model

Air Pressure


Free Speed

Abrasive Disc

Hose Size

Mass (Weight)

MAS-40

0.6 {6}

0.45

13,700

100 mm

3/8

0.9

MAS-70

0.6 {6}

0.98

7,500

180 mm

3/8

1.9

• 6 mm Hex. Socket Screw Key• 17 mm Single Ended Spanner• Bushing R 1/4 × NPT 1/4• Hose Nipple NPT 1/4 × 3/8

• 10 mm Hex. Socket Screw Key• 41 mm Single Ended Spanner• Hose Nipple NPT 3/8 × 3/8• Bushing M16 × NPT 3/8

MAS-40Model

MAS-70Model

Abrasive disc 1",1 - 1/2" & 2"

Abrasive disc 100 mm

Abrasive disc180 mm

Optional Parts

PN Disc Grit Sales UnitTB09736TB09737TB09738TB09739

25 pcs./set25 pcs./set25 pcs./set25 pcs./set

#40#60#80#100



#120#180#240#320

Green Discs for MYTON MLG-25 Disc Pad for MYTON MLS-20

1" Paper for MYTON MLS-20



#40#60#80#100



#120#180#240#320

1 - 1/2" Paper for MYTON MLS-20



#40#60#80#100



#120#180#240#320

2" Paper for MYTON MLS-20

GRINDING & SANDING

PN Description Sales UnitTB08872TB08873TB08874TB08875TB08876

5 pcs./set5 pcs./set10 pcs./set5 pcs./set5 pcs./set

GS#46 × 58 mmGS#60 × 58 mmGS#80 × 58 mm

GS#100 × 58 mmGS#120 × 58 mm

132 mm

72 mm

180 mm

82 mm

99 mm

202 mm

PN Description Sales UnitTQ14382TQ14383TQ14384

1 pc.1 pc.1 pc.

2" Disc Sanding Pad1-1/2" Disc Sanding Pad1” Disc Sanding Pad

PNEUMATIC SANDER MYTON

* Green Discs cannot be used on MAG-25.

Japanese Model

• 1" Disc Sanding Pad• 1-1/2" Disc Sanding Pad• 2" Disc Sanding pad• Two pieces of 14 mm spanner• Bushing R 1/4 × NPT 1/4• Assortment of Sample Abrasive Disks contains: 2 each of #60, #80, #100, and #120 2" abrasive disc 2 each of #60, #80, #100, and #120 1-1/2" abrasive disc 2 each of #60, #80, #100, and #120 1" abrasive disc

10

GRINDING

L-25BModel

Specifications


Optional AccessoriesMounted Wheel for AIR SONIC L-25B (Sales Unit : 5 pcs./set) Rotary Burr for AIR SONIC L-35C (Sales Unit : 1 pc.)

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

L-25B

0.4

27,000

0.6 (without hose)

Model

Air Pressure


Free Speed

Chuck Size

Hose Size

Mass (Weight)

L-35C

0.35

37,500

0.45 (without hose)

• 14 mm Single Ended Spanner• Mounted Wheel No.2• Mounted Wheel No.3

No.1 : 16 × 32

No.5 : 19 × 28

No.2 : 16 × 32

No.6 : 25 × 13

No.3 : 19 × 20

No.7 : 32 × 10

No.4 : 25 × 25

No.8 : 16 ballPN : TA9A277

PN : TA9A281

PN : TA9A278

PN : TA9A282

PN : TA9A279

PN : TA9A283

PN : TA9A280

No.1 : CB1C-106

PN : TP10594

PN : TA9A284

No.5 : CB5C-104

PN : TP10598

No.2 : CB2C-105

PN : TP10595

No.6 : CB6C-102

PN : TP10599

No.3 : CB3C-103

PN : TP10596

No.7 : CB7C-103

PN : TP10600

No.4 : CB4C-103

PN : TP10597

No.8 : CB8C-105

PN : TP10601

• Chuck Pin• Bushing R 1/4 × NPT 1/4

• 14 mm Single Ended Spanner• Mounted Wheel 13 × 13 × 6 × 38• Bushing R 1/4 × NPT 1/4

For all grinding, deburring and finishing jobs Special design for rotary burrsL-35CModel

136 mm 171 mm

PNEUMATIC DIE GRINDER AIR SONIC

AIR SONIC

0.6 {6}

6

1/4

・ Ideal for most deburring, finishing and grinding applications

・ Precision machined with heavy-duty spindle and support bearings

・ Rear exhaust with noise reduction system

・ Suitable for industrial and production applications

・ Locking throttle lever helps prevent accidental start-up

・ Accepts most stone-type and rotary carbide burrs with 6 mm shanks

Features

11

AL-55Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

AL-55

0.6 {6}

0.17

56,500

3

1/4

0.25

Model

Air Pressure


Free Speed

Chuck Size

Hose Size

Mass (Weight)

High Speed Rotation 56,500 rpm

• Mounted Wheel 5 × 13 × 3• Bushing R 1/4 × NPT 1/4

• Spanner 7 × 9Accessories Included

GRINDINGCUTTING

129 mm

22 mm OD

AIR SONICPNEUMATICDIE GRINDER

Grinding Stone (Optional)

• 5 dia. × 13 × 3 mm : 10 pcs./set

PN TB00137

PNEUMATICHACKSAW SUPER SAW

• Smooth high speed rotation and low vibration enables precision grinding

• Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications

• Compact and light weight for comfortable operation over long periods of time.

• prevents cold hands and absorbs vibration.

• Rear exhaust system

Special double-piston system provides low vibrationwhile improving cutting speed!

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1

mm

kg

SSW-110

0.6 {6}

0.29

7,000

11

0.62

Model

Air Pressure


Stroke Speed

Stroke Length

Mass (Weight)

Accessories Included• 2 pieces of 32 mm Saw Blade• 3 mm Hex. Socket Screw Key• Bushing R 1/4 × NPT 1/4

SSW-110

Optional AccessoriesPN Description Sales Unit

TB00759

TB00760

TB00192

TB00193

TA9A011

TA9A005

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

9 mm Saw Blade for gypsum-board

12 mm Saw Blade for plywood panel

14 mm Saw Blade for plastic

18 mm Saw Blade for plastic

24 mm Saw Blade for mild steel

32 mm Saw Blade for mild steel

205 mm

SUPER SAW・Ideal for sawing and trimming operations on sheet

metal, aluminum, plastic and other materials・Suitable for automotive, fabrication, HVAC, electrical

and woodworking applications・Ultra lightweight construction with low vibration

performance・Optimized blade stroke for maximum cutting

performance・Powerful dual piston construction・Locking throttle lever helps prevent accidental start-up

Features

12

PORTABLE PRECISION FINISHING FILE SUPER HAND FILING

Fast, efficient filing, sanding anddeburring tools

SH-100AModel

Optional Accessories

PN Description Sales UnitTA9A222TA9A223TA9A224TA9A225TA91752TA94625TB04319


1 set1 set1 set

Rat Tail File SF-10Triangular Taper File SF-11 Half Round File SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-900

Model

Air Pressure


Stroke Speed

Stroke Length

File Shank Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

SH-100A

0.6 {6}

0.24

3,700

9

6.3

1.1

ASH-900

0.6 {6}

0.2

6,300

9

5.0

0.5

• Flat Bastard File SF-13• Rat Tail File SF-10• Triangular Taper File SF-11• Half Rounded File SF-12• 3 mm Hex. Socket Screw Key• Bushing R 1/4 × NPT 1/4

• Flat Bastard File SF-13• Rat Tail File SF-10• Triangular Taper File SF-11• Half Rounded File SF-12• 2.5 mm Hex. Socket Screw Key• Bushing R 1/4 × NPT 1/4

For Super Hand SH-100A & ASH-900

Flat Bastard File SF-13

Weight reduced by halffor comfortable operationover long period of time

Rat Tail File SF-10

Triangular Taper File SF-11

Half Round File SF-12

PN TB04319Sanding Pad Ass'y for ASH-900

177 mm

PN TA91752Rubber Pad Ass'y for SH-100A

PN TA94625Supporter Ass’y for SH-100A(use with TA91752)

SUPER HAND

ASH-900Model

182 mm

・Eliminates time consuming manual hand-filing operations

・Ideal for industrial production filing applications on steel, aluminum, brass, wood and other materials

・Unique and compact design delivers reduced vibration performance while reducing operator fatigue.

・Interchangeable files

・Rear exhaust system

Features

13

SHL-40Model

FILING SUPER HAND LIGHTPORTABLE PRECISIONFINISHING FILE

PORTABLE FINEFINISHING FILE

SUPER HAND LIGHTMICRO AIR HAND

Select either one of the 2 modelsdepending on your applications.

2.2 mm

MAH-162.2mm

Stroke

0.5 mm

MAH-050.5mm

Stroke

Flat end file (PN TB07502)

Triangular end file (PN TB07504)

Round end file (PN TB07503)

Half-round end file (PN TB07505)

2

2

ø3

ø3

ø3

2

ø3

65

ø1

0.5

1

65

4.5

1.5

65

65

2

R1 Vice Holder (PN TB07506) This holder can be used for polishing and lappingapplications by mounting ceramic stones, etc.(Max size: Thickness 3.2 mm × Width 20 mm)

Mounting examples

MICRO AIR HAND

• Flat end file• Round end file

• Bushing R1/4 × NPT 1/4• Hex. Wrench key 2Accessories Included

176 mm

Fine reciprocating motion best forprecision parts filing

Specifications

MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

MAH-05

22,000

0.5

MAH-16

11,000

2.2

Model

Air Pressure


Stroke Speed

Stroke

Shank diameter of file

Mass (Weight)

MAH-05/MAH-16Model

MAH-05

MAH-16

0.6 {6}

0.07

3

0.4

• Flat File LF-13• 2 mm Hex. Socket Screw Key• Bushing R 1/4 × NPT 1/4


Specifications

MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

SHL-40

0.6 {6}

0.07

9,000

4

3

0.4

Model

Air Pressure


Stroke Speed

Stroke Length

File Shank Size

Mass (Weight)

Best suited for deburring of die-castaluminum products and machined parts

Rat Tail File LF-10(PN TB09652)

Triangular Taper File LF-11(PN TB09654)

Half Round File LF-12(PN TB09653)

Flat File LF-13(PN TB09651)

80

3 OD

80

3 OD

80

4.5

80

3 OD

Optional Accessories Sales Unit (3 pcs/set)

Optional Accessories Sales Unit (5 pcs/set)

4.0mm

Stroke

4.0 mm

179 mm

14

SANDING

Rear exhaustsystem

Ideal for sanding and grinding innarrow spaces,recessed areas andon curved surfaces

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

B-10N0.6 {6}

0.417,0001,120

10 × 3301/40.7

ModelAir PressureAir Consumption (No load)

Motor Free SpeedBelt SpeedBelt SizeHose SizeMass (Weight)

B-20N0.6 {6}0.52

17,0002,620

20 × 5201/41.2

B-30N0.6 {6}0.68

14,0002,160

30 × 5401/42.4

•2 pieces of Abrasive Belt Z#60 × 10 mm (1 piece installed)•Abrasive Belt Z#80 × 10 mm•Abrasive Belt Z#100 × 10 mm•Abrasive Belt Z#120 × 10 mm•2 mm Hex. Wrench Key•4 mm Hex. Wrench Key•Bushing R 1/4 × NPT 1/4

•2 pieces of Abrasive Belt Z#60 × 20 mm (1 piece installed)•Abrasive Belt Z#80 × 20 mm•Abrasive Belt Z#100 × 20 mm•Abrasive Belt Z#120 × 20 mm•2.5 mm Hex. Wrench Key•4 mm Hex. Wrench Key•Bushing R 1/4 × NPT 1/4•Convex Shoe•Finger Pad Ass’y•Pan Head Screw 5 × 10•Pan Head Screw 6 × 10

B-20NB0.6 {6}0.52

17,0002,620

20 × 5201/41.2

•2 pieces of Abrasive Belt Z#60 × 20 mm (1 piece installed)•Abrasive Belt Z#80 × 20 mm•Abrasive Belt Z#100 × 20 mm•Abrasive Belt #120 × 20 mm•4 mm Hex. Wrench Key•Bushing R 1/4 × NPT 1/4•Convex Shoe•Finger Pad Ass’y•Pan Head Screw 5 × 10•Pan Head Screw 6 × 10

•2 pieces of Abrasive Belt Z#60 × 30 mm (1 piece installed)•Abrasive Belt Z#80 × 30 mm•Abrasive Belt Z#100 × 30 mm•4 mm Hex. Wrench Key•5 mm Hex. Wrench Key•Handle Ass’y•Bushing R 1/4 × NPT 1/4

Optional Parts

PN Description Sales UnitTQ10942TB07283TB05539

1 pc.1 set1 set

Shoe 6 (for 6 mm belt)Bracket 6 Ass'y (for 6 mm belt)Offset Bracket 10 Ass'y

Optional Parts for B-10NPN Description Sales Unit

TB07109 1 setOffset Bracket 20 Ass'y

Optional Parts for B-20N/B-20NBPN Description Sales Unit

TB08150 1 setOffset Bracket 30 Ass'y

Optional Parts for B-30N

PN Description Sales UnitTB00241TB00242TB00243TB00244TB00245TB00246TA9A237TA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set

Abrasive Belt Z#60 × 6 mmAbrasive Belt Z#80 × 6 mmAbrasive Belt Z#100 × 6 mmAbrasive Belt Z#120 × 6 mmAbrasive Belt Z#180 × 6 mmAbrasive Belt Z#240 × 6 mmAbrasive Belt AA#400 × 6 mmAbrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm

Abrasive Belt for B-10NPN Description Sales Unit

TA99605TA99606TA99607TA99608TA99609TB00250TB00251TA9A252TA9A253TA9A254

20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set

Abrasive Belt Z#40 × 20 mmAbrasive Belt Z#60 × 20 mmAbrasive Belt Z#80 × 20 mmAbrasive Belt Z#100 × 20 mmAbrasive Belt Z#120 × 20 mmAbrasive Belt Z#180 × 20 mmAbrasive Belt Z#240 × 20 mmAbrasive Belt AA#280 × 20 mmAbrasive Belt AA#320 × 20 mmAbrasive Belt AA#400 × 20 mm

Abrasive Belt for B-20N/B-20NB Abrasive Belt for B-30NPN Description Sales Unit

TB00252TB00253TB00254TB00255TB00256TB00257TB00258TA9A262TA9A263TA9A264

20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set

Abrasive Belt Z#40 × 30 mmAbrasive Belt Z#60 × 30 mmAbrasive Belt Z#80 × 30 mmAbrasive Belt Z#100 × 30 mmAbrasive Belt Z#120 × 30 mmAbrasive Belt Z#180 × 30 mmAbrasive Belt Z#240 × 30 mmAbrasive Belt AA#280 × 30 mmAbrasive Belt AA#320 × 30 mmAbrasive Belt AA#400 × 30 mm

PNEUMATIC BELT SANDER BELTON

BELTONModel

Belt Size30 mm (W)B-30NModelBelt Size30 mm (W)

299 mm

257 mm

B-20NModelBelt Size20 mm (W)

250 mm

243 mm

Model B-20NB Belt Size20 mm (W)

250 mm

243 mm

Model B-10NModelBelt Size10 mm (W)

152 mm

223 mm

The Idle Pulleyfor B-20N is supportedon both sides.

The Idle Pulleyfor B-20NB is supportedon one side only.

15

SANDING

Optional Parts For BABY BELTON

PN Description Sales UnitTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set50 pcs./set

Abrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm

Abrasive Belt for BB-10A

*1: #400 is Aluminum Belt.

PN Description Sales UnitTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123

20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set20 pcs./set5 pcs./set5 pcs./set5 pcs./set

Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400*1

Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-VF (Equivalent to #180)Finish Belt A-M (Equivalent to #320) Finish Belt S-SF (Equivalent to #400)

Abrasive Belt for BB-20

PNEUMATIC BELT SANDER BELTON

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

ModelAir PressureAir Consumption (No load)

Motor Free SpeedBelt SpeedBelt SizeHose SizeMass (Weight)

BB-200.6 {6}0.43

16,0001,100

20 × 3301/40.8

BB-10A0.6 {6}0.25

16,0001,000

10 × 3301/40.6

•Abrasive Belt Z#100 × 10 mm (Installed) •Abrasive Belt Z#120 × 10 mm•Abrasive Belt Z#180 × 10 mm•Abrasive Belt Z#240 × 10 mm•1.5 mm Hex. Wrench Key•Bushing R 1/4 × NPT 1/4

•Abrasive Belt Z#60 × 20 mm (Installed)•Abrasive Belt Z#120 × 20 mm•Abrasive Belt Z#240 × 20 mm•2.5 mm Hex. Wrench Key•3 mm Hex. Wrench Key•Shoe•Dust Cover•Bushing R 1/4 × NPT 1/4

Ideal for deburring, chamfering, bead grinding, and polishing applications

Deburring & chamfering of uneven edge and plate surfaces

Detail finishing Deburning of thin materials

Curved and unique profiles

Belt rotation direction can be changed. Lever position can be changed for left or right hand operator convenience.nd operator conve

For left-handed user

For right-handed user

BABY BELTON BB-10AModelBelt Size10 mm (W)

246 mm

79 mm

BB-20ModelBelt Size20 mm (W)

249 mm

103 mm

• Compact and lightweight, yet powerful• Alternative rotation direction• Ergonomically designed for left or right hand operator convenience

• Compact and lightweight, yet powerful• Alternative rotation direction• Ergonomically designed for left or right hand operator convenience

ReverseReverseForwardForward

16

SANDING

Super lightweight, low-vibration design

HANDY PNEUMATIC SANDER FREE SANDER

FREE SANDER

Produces ultra-high speed orbits for super-fine finishing of all materials

Powerful turbine motor

FS-100CModel

FS-50AModel

ModelModel

Air Pressure


Free Speed

Orbit Diameter

Pad Size

Paper Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

FS-100C

0.6 {6}

0.2

20,000

1.5

100 × 110

114 × 140

0.5

FS-50A

0.6 {6}

0.14

15,000

1.2

75 × 82

70 × 114

0.5

• Air Hose H Ass'y• Bushing R 1/4 × NPT 1/4• 5 pieces of abrasive paper #180• 5 pieces of abrasive paper #240

• Air Hose H Ass'y• Bushing R 1/4 × NPT 1/4• 5 pieces of abrasive paper #180• 5 pieces of abrasive paper #240

82 mm75 mm100 mm110 mm

Round-Pad for FS-100CThe pad is made of sponge rubber and conform easily to the shape being worked.Double-stick tape is used with round pad.

Optional Accessories PN Sales Unit

TA99828TB02240

1 pc.1 pc.

DescriptionRubber Pad Ass'yDust Collector Ass'y

PN Sales UnitTA9A367TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235

1 pc.1 pc.

200 pcs./set200 pcs./set200 pcs./set200 pcs./set200 pcs./set200 pcs./set200 pcs./set

1 pc.

DescriptionRubber Pad Ass'yRound Pad Ass'yAbrasive paper #100Abrasive paper #120 Abrasive paper #150Abrasive paper #180 Abrasive paper #240 Abrasive paper #280 Abrasive paper #320 Dust Collector Ass'y

For Free Sander FS-100C For Free Sander FS-50A

・ Ideal for sanding and surface finishing wood, metal, plastic and other materials

・Lightweight design with minimal vibration

・High output and low air consumption motors produce high speed orbits for swirl-free finishes

・Oil free design

・Suitable for industrial and production applications

Features

17

SANDING

Ideal for inline andgrain sanding applications

LINE SANDERPNEUMATIC RECIPROCATING SANDER LINE SANDER

・ Ideal for most inline and profile sanding applications

・Compact and lightweight 0.75 kg design

・Low vibration and minimal noise output

・Suitable for sanding steel, aluminum, wood, plastic and other materials

Features

Special double-action minimizes both noise and vibration.

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

LS-10

0.6 {6}

0.11

4,000

4

55 × 103

57 × 140

0.75

Model

Air Pressure


Free Speed

Stroke Length

Pad Size

Abrasive Paper Size

Mass (Weight)

• Hose E Ass'y• Bushing R 1/4 × NPT 1/4• Block Rubber Pad Ass'y• 5 pieces of Abrasive Paper #240• 5 pieces of Abrasive Paper #320• Base Plate A Ass'y

LS-10

The Block Rubber Pad Assembly can be easily trimmed to conform to the shape being worked and is available as an accessory.

103 mm

55 mm

Optional AccessoryPN Description Sales Unit

TB02244 1 pc.Dust Collector Ass'y

Double Piston AlignmentSpecial Sanding Pad

18

SANDING

APS-125/150

Accessories Included • Spanner 17• Bushing R 1/4 × NPT 1/4

Ergonomic lightweight designModel

Specifications

Non Vacuum

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

kg

APS-125

0.6 {6}

0.45

10,000

5

125

0.69

0.10

Model

Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad Mass (Weight)

APS-150

0.6 {6}

0.45

10,000

5

150

0.72

0.12

The non-vacuum model is available from stock and can easily be modified to self-vacuum or central vacuum.

For Self Vacuum & Central Vacuum

Self Vacuum Central Vacuum

145 mm

PNEUMATIC COMPACT SANDER PALM ORBITAL SANDER

PALM ORBITAL SANDER

OSV-60A

Model

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

OSV-60A

0.6 {6}

0.68

8,500

10

150

2.0

for self stick papers

Model

Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad

245 mm

Heavy-duty and powerful withadjustable speed regulator

Accessories Included• Bushing R 1/4 × NPT 1/4• Spanner 17• Brush• Dust Collection Assembly with Dust Bag

Random orbital actioncreates a professional finish

ORBITAL SANDER

By offsetting the sanding pad shaft, fast aggressive sanding is achieved while dramatically reducing swirl patterns. Speed adjustments allow for the best speed for the best job.

・Powerful dual action for tough applications for tough applications

・Standard with dust extraction system

・Rugged construction for years of reliable performance

Features

・Extremely light. APS-125 weighs just 690g・Ergonomically designed for operator convenience

and comfort・Powerful high speed 10,000 RPM motor・Ultra small orbital action for high quality swirl-free finishes・Available with 125 mm or 150 mm pads・Variable speed control

・Feather edging, metal preparation, and finishing work on body filler・Curved surface sanding and corner rounding in

wood work

Features

Applications

19

DRILLINGDEBURRING

PNEUMATICDEBURRING TOOL

ADR-65Model Model

Model

Air Pressure


Free Speed

Max. Drilling Capacity

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

kg

ADR-65

0.6 {6}

0.55

2,900

6.5

0.8

ADR-100

0.6 {6}

0.67

2,000

10.0

1.1

• Drill Chuck (Installed)• Chuck Handle• Bushing R 1/4 × NPT 1/4• 30SH

The power and performance you needto drill deeper and faster

175 mm

154 mm

ADR-100

168 mm

221 mm

Change rotation direction by turning the valve as indicated.

Forward

Reverse

Reversible

Variable speed adjustmentTurn the speed control nutto change the R.P.M.

AIR DRILL

For deburring machined holesBURR CUTTER

BURR CUTTERPNEUMATICHAND DRILL AIR DRILL

・Ultra high power to weight ratio

・Ergonomically designed to reduce operator fatigue

・Variable speed control

・Reversible

・Designed for industrial and production applications

Features

・While gripping the lever, push the countersink into the machined holes to remove burrs

・Optimum speed can be obtained by the adjust valve, resulting in clear deburred surfaces

・Push-to-engage type prevents the countersink from coming off the hole and damaging the workpiece

・Replacement of the countersink is easy and quick with a set of three quick change chucks provided

Features

Countersinks are not provided with the tool. Please purchase them locally.*Chuck 12 mm is optional.

Air Pressure


Motor Free Speed

Deburring Hole Diameter

Countersink Shank Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

0.6 {6}

0.22

420

3 to 34 mm

6, 8, 10, 12* mm

0.75

• Chuck 6 mm• Chuck 8 mm• Chuck 10 mm (Installed)• Suspension Bail• Hex. Socket screw Key 2.5 mm• Bushing R 1/8 × NPT 1/4

BC-005Model

209 mm

Optional AccessoryPN Description Sales Unit

TQ10969 1 pc.Hanger

20

CHAMFERINGPORTABLECHAMFERING TOOLS HAND BEVELER/MINI BEVELER

XChamfer

YStraight

HB-15B

• Ideal for plate, pipe, and tube beveling for welding preparation• Uses easy-to-replace indexable inserts• Indexable inserts have four working edges for good economy• Finishes a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• High speed cutting action minimizes material hardening

Chamfering up to 15C

Accessories Included• 4 mm Hex. Socket Screw Key• 5 mm Hex. Socket Screw Key• 6 mm Hex. Socket Screw Key• Spanner 24 × 27• Hook Spanner 25 – 28• 3 mm T Wrench Key• 1 set (12 pieces/set) of TA9A093 Indexable Insert 12.7 sq.

Optional accessories• TA9A728 Pipe Plate Ass’y Capacity 125 to 800 mm O.D.

Model

Accessories Included• 3 mm Hex. Socket Screw Key• 4 mm Hex. Socket Screw Key• Spanner T-9F

Optional accessories• TA9A386 Indexable Insert 9.525 (10 pcs./set)• TA9A592 Indexable Insert 9.525 2R (10 pcs./set)• TA9A638 Indexable Insert 9.525 3R (10 pcs./set)• TA9A594 Inner Head Ass'y

• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mm

• An optional inner head ass'y allows chamfering a pipe of inner diameter larger than 100 mm (50R)

Handy Electric Chamfering Tool

MB-03A Double insulation

3C

3R

Model

278 mm

150 mm

108 mm

220 mm

295 mm295 mm

HAND BEVELER

MINI BEVELER

SpecificationsModel

Power Supply (Single phase)


Rated Current

Chamfering Capacity(Mild Steel)

Chamfer Angle

Rated Revolutions

Mass (Weight)

MB-03A

430

2 / 4.5

Up to 3 mm Chamfer or 2 mmand 3 mm Radius

45˚

7,100

2.5

W

A

min-1(rpm)

kg

XChamfer

YStraight45˚

30˚15˚

X1594

Y15

15.515.4

HB-15BMild Steel(mm)

ChamferAngle

Chamfer angle and width

Mild Steel

ModelPower Source (Single phase)Rated Power ConsumptionRated CurrentNo-load SpeedChamfering Capacity (Mild Steel)Chamfer AngleMass (Weight)

Specifications

WA

min-1(rpm)

kg

115 V AC, 50/60 Hz91010.53,340

230 V AC, 50/60 Hz910

42,750

115 V AC, 50/60 Hz 230 V AC, 50/60 Hz

HB-15B

0C - 15C15˚ - 45˚

14

Chamfer angle, width and radius

45˚

X

3

Y

3

MB-03A

Mild Steel(mm)ChamferAngle

Round

RadiusModel

Material

Radius(mm)

MB-03A

Mild Steel

2, 3

15CMild Steel

Chamfering I-beamsChamfering I-beamsChamfering steel platesChamfering steel plates

Compact and light for speed chamfering

21

CHAMFERINGPORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

XChamfer

YStraight

XChamfer

YStraight

ModelHandy Electric Chamfering Tool

EMB-0307B

3C

7C

4R

4R

Stainless Steel

Mild Steel

316.4 mm

179 mm

189.6 mm

MINI BEVELER

Accessories Included• Indexable Insert with Hole 12.7• Indexable Insert Set Screw• 5 mm Hex. Socket Screw Key• Spanner 8 × 10• Spanner T-15D

• Sub Handle• Grip Guard• Ball Bearing 687zz• Gauge C3

ECB-0203Electric Radial Chamfering Tool

Smoothly chamfering straight and curved edges • Designed to bevel stainless and mild steel• Minimum chamfering plate thickness is 2 mm (Max. 0.5 mm

Chamfer)• Indexable inserts have four working edges for good economy• An optional straight plate allows chamfering a straight edge

shoulder

*: In case of 3 mm Radius, an optional indexable insert for 3R is necessary, and 2 mm Radius, an optional guide sleeve 24 mm dia. and indexable insert for 2R are necessary.

1.5C2R

Stainless Steel

3C3R

Mild Steel

Model

Chamfering straight edges Chamfering curved edges

136 mm

400 mm

Accessories Included• Carbon Brush Ass'y• 4 mm Hex. Wrench Key• Indexable Insert with Hole 12.7• Indexable Insert Set Screw 4 × 7• Dust Box Ass'y

• 2 pieces of Hex. Nut M8• 2 pieces of 8 x 25 mm Hex. Socket Set Screw• Spanner T-15D• 3 pieces of Pan Head Screw 5 × 10

Specifications

• Ideal for edge beveling pipe, tube, and plate• Designed to bevel stainless and mild steel• Adjustable to bevel angles 15°- 45°• Bevel width up to 7 mm on mild steel.• Uses indexable carbide inserts• Swarf and chip collection box included

Model

Power Supply


Rated Current

Rated Duty

No-load Speed

Chamfer Angle

Power Cord Length

Mass (Weight)

EMB-0307B

220 V - 240 V AC, 50/60 Hz

1010

4.6

Continuous

11,000

Up to 7 mm Chamfer or 2, 3, 4 mm Radius

Up to 3 mm Chamfer or 2, 3, 4 mm Radius

15 – 45 Degrees

4.0

3.9

CIRCUIT BEVELER Double insulation

Double insulation

W

A

min-1(rpm)

m

kg

Mild Steel

Stainless Steel

SpecificationsECB-0203

220 V - 240 V AC, 50/60 Hz45030

11,000Up to 3 mm Chamfer or 2* and 3* mm RadiusUp to 1.5 mm Chamfer or 2* mm Radius

45˚2.52.5

W

min

min-1(rpm)

m

kg

ChamferingCapacity

Mild Steel

Stainless Steel

ModelPower SupplyRated Power ConsumptionRated DutyNo-load Speed

Chamfer AnglePower Cord LengthMass (Weight)

Round

RadiusModel

Material

Radius(mm)

Mild Steel

2, 3, 4

EMB-0307B

StainlessSteel

2, 3, 4


45˚30˚15˚

X7

3.81.5

Y7

6.65.6

X3

2.21

Y3

3.83.8

EMB-0307BChamferAngle Mild Steel(mm)Stainless Steel(mm)

Chamfering range of operationMin. Diameter Min. Radius Min. Depth Min. Thickness

45˚

X

3

Y

3

X

1.5

Y

1.5

ECB-0203ChamferAngle


MildSteel(mm)

StailessSteel Round

RadiusModel

Material

Radius(mm)

Mild Steel

2, 3

StainlessSteel

2

ECB-0203

ChamferingCapacity

22

PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

XChamfer

YStraight

Round

Radius

Optional accessories• TB09097 Indexable Insert 8.4 for mild steel (10 pcs./set)• TB09338 Indexable Insert 8.4 for stainless steel (10 pcs./set)• TB09140 Guide plate 78 Assembly• TB09143 Plate Assembly for straight edge use *Requires use of TB09140 Guide Plate 78 Assembly

Accessories Included• 2 pieces of indexable insert set screw (a back up supply)• Hex key 2 for chamfering adjustments• T-6F wrench for cutter set screw• Bushing R 1/4 × NPT 1/4

1C

64 mm

106 mm

Pneumatic Chamfering ToolLever Type Ring Type

AMB-0307AMBL-0307

Accessories Included• 3 mm Hex. Socket Screw key• 4 mm Hex. Socket Screw key• Spanner T-15F• 2 pieces of Hex. nut M8

• Bushing R 3/8 × NPT 3/8• 2 pieces of 8 × 25 Hex. Socket Set Screw• Indexable Insert Set Screw 4 × 7• Indexable Insert

3C 4RStainless Steel

7C 4RMild Steel Specifications

AMBL-0307, AMB-0307

Mild Steel

Stainless Steel

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

202 mm

126 mm

180 mm

AMB-0307

177 mm

126 mm

180 mm

AMBL-0307

MINI BEVELER

Model

Air Pressure


Free Speed

Chamfer Angle

Mass (Weight)

Specifications

MPa {kgf/cm2}

m3/min

min-1

kg

Model

Air Pressure

Air Consumption

Free Speed

ChamferingCapacity

Chamfer Angle

Mass (Weight)

CB-01

Model

Material

Radius (mm)

Mild Steel

2, 3, 4

AMBL-0307/AMB-0307

StainlessSteel

2, 3, 4


45˚30˚15˚

X74

2.2

Y778

X3

2.21

Y3

3.83.8

Mild Steel (mm)ChamferAngle Stainless Steel (mm)

AMBL-0307/AMB-0307

XChamfer

YStraight

45˚

X

1

Y

1

CB-01

Mild Steel (mm)ChamferAngle


Mild Steel

Chamfering Capacity

CB-01Pneumatic Radial Chamfering Tool

Ideally suited for chamfering machine and mold component parts

ModelCIRCUIT BEVELER

Chamfering range of operationMin. Diameter

6.8mm

6.8mm

Min. Radius

3mm

Min. Depth

6mm

0.6 {6}

0.15

28,000

Up to 1 mm Chamfer

Up to 0.5 mm Chamfer

45˚

0.5

0.6 {6}

0.9

14,000

Up to 7 mm Chamfer or 2 mm, 3 mm, 4 mm Radius

Up to 3 mm Chamfer or 2 mm, 3 mm, 4 mm Radius

15˚ - 45˚

2.9

CHAMFERING

・Lightweight design for portable edge beveling applications・Ideal for beveling plate, pipe, tube and other

profiles・Designed to bevel stainless and carbon steels・Adjustable to bevel angles from 15°- 45°・300 mm minimum radius bend・Bevel width up to 7 mm at 45°・Uses indexable carbide inserts

Features

• Only requires a 6.8 mm diameter hole for chamfering

• Two 3-sided indexable inserts provide a cost effective way to get a smooth, chatter free finish

Features

Mild Steel

Stainless Steel

23

CHAMFERINGPORTABLECHAMFERING TOOLS CIRCUIT BEVELER

XChamfer

YStraight

CB-02Pneumatic Radial Chamfering Tool

Optional Accessories• TA9A386 : Indexable Insert 9.525 (10 pcs./set)• TA9A592 : Indexable insert 9.525 R2 (10 pcs./set)

Accessories Included• Indexable Insert• Adjustment gauge• Spanner T-9F

• Protective cap• Hook Spanner 58-62• Bushing R 1/4 × NPT 1/4

Specifications

2C

2R

Model

116 mm

136 mm

CIRCUIT BEVELER

CBR-03Pneumatic Radial Chamfering Tool

For Bridge and Shipbuilding Applications

ModelCIRCUIT BEVELER

Chamfering range of operationMin. Diameter Min. Radius Min. Depth

45˚

X

2

Y

2

CB-02

Mild Steel (mm)ChamferAngle

Round

RadiusModel

Material

Radius (mm)

CB-02

Mild Steel

2


Mild Steel

Shipbuilding

Bridge• Radius chamfering on the scallop parts or holes of

bridge members

• Meets or exceeds PSPC* requirements on surface preparation of steel materials prior to coating

• Radius chamfering on steel materials used in seawater ballast tanks and double-side skin bulk carrier production

• Dual cutting head with 4 radius surfaces per tip and a quick-change base

* PSPC stands for Performance Standard for Protective Coatings regulated by International Marine Organization.

Accessories Included• 2 pieces of indexable insert (installed)• Torx Driver

Specifications

MPa {kgf/cm2}

m3/min

min-1

mm

kg

Model

Air Pressure


Free Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

CBR-03

0.6 {6}

0.65

12,000

3 mm Radius

45˚

2.2 (including hose)

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

Model

Air Pressure

Air Consumption(No load)

Free Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

CB-02

0.6 {6}

0.4

13,000

Up to 2mm Chamfer or 2 mm Radius

45˚

1.8

Round

RadiusModel

Material

Radius (mm)

CBR-03

Mild Steel

3

Chamfer radiusChamfering range of operation

Min. Diameter Min. Radius Min. Depth

22mm

22mm 11mm

9mm

81 mm

117 mm

・Uniquely designed to bevel circular, elliptical and straight line profiles・Bevels exterior and/or interior edges・Depth gauge provided to accurately set

bevel widths

Features

3RSteel

• Insert Setscrew• Handle

24

OptionalAccessories for SPRING BALANCERHAND BEVELER / MINI BEVELER

/ CIRCUIT BEVELER

TB09097

TB09338

TA9A093

TB01159

TB01791

TB01651

TB01790

TB09018

TA9A386

TA9A592

TA9A638

TB09143

TB09140

TA9A728

TB02539

TA9A594

TB02857

TB03097

TB02862

TB03424

TQ01683

Indexable Insert 8.4

Indexable Insert 8.4 for Stainless Steel


Indexable Insert 12.7 with hole

Indexable Insert 12.7 R2







Plate Assembly for Straight Edge Use

Guide Plate 78 Assembly

Plate Assembly for Pipe

Attachment for Small Dia. Pipe

Inner Head Assembly

Guide sleeve 24 mm dia. Assembly

Plate Assembly for Straight Line Use

Dust Box Assembly

Spanner T-9D

Spanner T-15D

10 pcs./set

10 pcs./set

12 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

1 set

1 set

1 set

1 set

1 set

1 set

1 set

1 set

1 pc.

1 pc.

CB-01

CB-01

HB-15B

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307

CBR-03

MB-03A, CB-02

MB-03A, CB-02, ECB-02

MB-03A

CB-01

CB-01

HB-15B

EMB-0307B, AMB-0307, AMBL-0307

MB-03A

ECB-0203

ECB-0203

ECB-0203

MB-03A, CB-02

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

DescriptionPN Sales Unit Application model Remarks

For pipe 125 - 800 mm dia.

For pipe 80 - 200 mm dia.

For min. 100 mm dia.

For chamfering R2

Used with Plate Ass'y for straight line use

SPRING BALANCER TIGON Spring Balancer ImprovesWork Safety and Efficiency

MODEL

TW-00TW-0TW-3TW-5TW-9TW-15TW-22TW-30TW-40TW-50TW-60TW-70

0.5 - 1.50.5 - 1.51.0 - 3.02.5 - 5.04.5 - 9.09.0 - 15.015.0 - 22.022.0 - 30.030.0 - 40.040.0 - 50.050.0 - 60.060.0 - 70.0

Capacity (kg)

0.51.01.31.31.31.31.51.51.51.51.51.5

Stroke (m)

0.20.51.41.53.43.87.27.69.810.411.611.8

Weight (kg)

MODEL

RW-0RW-3RW-5TW-06RTW-1R

0.5 - 1.51.0 - 3.02.5 - 5.00.2 - 0.60.5 - 1.5

Capacity (kg)

2.02.02.01.51.5

Stroke (m)

0.50.70.90.30.3

Weight (kg)

SPRING BALANCER series

RETRACTOR series

25

QUICK CONNECT COUPLINGS CUPLACUPLA

Duster CuplaDCS-65PNG

Hi Cupla BL65SN-BL

Nut Cupla65PNG

Nut Cupla65PN

Hi Cupla20PM

Hi Cupla20PM

Purge PlugPV-40PH

Hi Cupla 200200-40SH

Line Cupla 200200T Type

Plastic Plug65PN-PLA

Purge Line CuplaRE-PV-30

NK Cupla HoseNKU-605B

Rotary Nut Cupla65SNRG

Anti-vibration Plug HoseSHA-3-2R

NK Cupla Coil HoseNKC-503B

Purge Hi CuplaPV-40SM

Twist PlugTS-20PM

Twist PlugTS-20PM

Rotary PlugRL-20PM

Hi Cupla AceHA-65SN

Air Screwdriver

Air Grinders

Air Drill

Air Drill

Impact Wrenches

Blow Guns

Nitto Kohki supplies various types of air Cuplas to meet all needs of air piping from main supply, relays in factories, pipe end connections to pneumatic tools, and those of air piping within equipment. The following sketch gives you some examples of air piping using Hi Cupla Series and may serve as a good reference in selecting appropriate Cuplas. For more information please visit http://www.nitto-kohki.co.jp/e/prd/d_cat/ and see our eCatalog here.

26

QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLSHI CUPLA series

HI CUPLA

HI CUPLA 200

• One-way shut-off cupla with an automatic shut-off valve in the socket• Important parts are hardened for excellent wear resistance and durability

• Simple and secure push-to-connect type• New valve design for low pressure loss to achieve flow

rate increase

Plug SocketFor hose connection

17PH20PH30PH40PH400PH600PH800PH

For 1/4" hoseFor 1/4" hoseFor 3/8" hoseFor 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose

For female thread connection10PM20PM30PM40PM400PM600PM800PM

For Rc 1/8For Rc 1/4For Rc 3/8For Rc 1/2For Rc 1/2For Rc 3/4For Rc 1

For male thread connection20PF30PF40PF400PF600PF800PF

For R 1/4For R 3/8For R 1/2For R 1/2For R 3/4For R 1

For male thread connection (parallel thread)20PFF For G 1/4"

For hose connection17SH20SH30SH40SH400SH600SH800SH

For 1/4" hoseFor 1/4" hoseFor 3/8" hoseFor 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose

For female thread connection10SM20SM30SM40SM400SM600SM800SM

For Rc 1/8For Rc 1/4For Rc 3/8For Rc 1/2For Rc 1/2For Rc 3/4For Rc 1

For male thread connection20SF30SF40SF400SF600SF800SF

For R 1/4For R 3/8For R 1/2For R 1/2For R 3/4For R 1

SpecificationsBody material

Size

Workingpressure

Seal materialWorking temperature range

Brass1/8" to 1"

1/4" to 1" hose1.010

Steel(Chrome-plated)

1.515

Seal material Mark Workingtemperature range Remarks

Stainless steel

1.515

ThreadHose barbMPakgf/cm2

Nitrile rubber

Fluoro rubber

NBR (SG)

FKM (X-100)-20˚C to +80˚C

-20˚C to +180˚CStandardmaterial

SocketFor hose connection

200-17SH200-20SH200-30SH200-40SH

For 1/4" hoseFor 1/4" hoseFor 3/8" hoseFor 1/2" hose

For female thread connection200-20SM200-30SM200-40SM

For Rc 1/4For Rc 3/8For Rc 1/2

For male thread connection200-20SF200-30SF200-40SF

For R 1/4For R 3/8For R 1/2

SpecificationsBody material

Size

Workingpressure

Seal materialWorking temperature range

Steel (Chrome-plated)

1/4", 3/8", 1/2"

1.515

Seal material Mark Workingtemperature range Remarks

Thread andhose barb

Nitrile rubber NBR (SG) -20˚C to +60˚C Standardmaterial

MPakgf/cm2

27

QUICK CONNECT COUPLINGS CUPLA

FULL-BLOW CUPLA

LINE CUPLA

HI CUPLA ACE

ROTARY PLUG

• No hose clamp required• Nut types are available in Hi Cupla Series and Hi Cupla 200 Series• To mount on hose, simply slide it over the nipple and tighten the nut

Body materialWorking pressureSeal material

Steel (Chrome-plated), Stainless Steel1.5 MPa (15 kgf/cm2)

Nitrile rubber

• Newly developed rotary function allows 360° swivelling• Rotary neck plug for hose connection to pneumatic tools and

pneumatic devices• Fits at 45° angle to the tool eliminating annoying offset load caused

by connected hose


Steel (Nickel-plated), Stainless Steel1.5 MPa (15 kgf/cm2)

Nitrile rubber

• Enables several air lines to be taken simultaneuosly from one supply line• Just push in the plug into socket for simple and secure connection• Choose from the 2-outlet type (Model 200T), the 5-outlet straight type

(Model 200L) and the 5-outlet star type (Model 200S) to suit your application

Body materialCuplaWorking pressureSeal material

AluminumSteel (Chrome-plated)1.5 MPa (15 kgf/cm2)

Nitrile rubber

• Unique full-open gate type valve mechanism realizes low pressure loss and high flow rate, which reduces required source air volume

• The flow rate is increased by up to 40% more than that of conventional Cuplas

• During connection and disconnection, the valve is closed, enabling connection/disconnection under zero line pressure


Aluminum alloy1.5 MPa (15 kgf/cm2)

Nitrile rubber

• Lightweight plastic coupling with automatic safety lock• Pressure ratings comparable to steel Cuplas• Just push plug into socket for simple connection

Body material

Working pressure

Seal material

Engineering plastics (PBT, POM)1.5 MPa (15 kgf/cm2)

1.0 MPa (10 kgf/cm2) for Model HA-TNitrile rubber

* For more information please visit http://www.nitto-kohki.co.jp/e/ and see our eCatalog here.

NUT CUPLA

28

Electric & Hydraulic Machine Tools,Labor-saving plus improved work efficiency

A wide range of unique tools for boring and punching

ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE

Model WA-3500

ATRA ACE Cordless ModelPORTABLE MAGNETIC BASE DRILLING MACHINE

Model CLA-2720

JETBROACH CUTTERS &HIBROACH CUTTERS

ANNULAR CUTTERS

JETBROACH

HIBROACH

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model AO-5575

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model WOJ-3200

OTHER PRODUCT LINESMACHINE TOOLS

29

HYDRAULIC PUMPfor SELFER ACE

Model HPD-05

Double-Acting

SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER

Model HS11-1624

Puncher

HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER

Model E25-0615

• Powered by a Battery.• Total Weight Just 7 kg.• Hole Cutting Capacity : Hole Diameter 12 to 27 mm

New !

SAFETY GUIDE

Safety Precautions

Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.

Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.

Warning for ALL Machines and Tools

Notice for Air ToolsNotice for Electric Tools• Air pressure at the inlet of the tool must not exceed 0.6 MPa (6 kgf/cm2).

• Always keep the work area free from clutter and potentially dangerous conditions such as hanging power cords, working debris, air hoses, and garbage to prevent accidents from occurring.

• Consider proper working environments for each tool carefully. Do not expose tools to extreme amounts of moisture or direct contact with water or rain. Keep area well lit at all times to prevent hidden dangers and never operate the equipment near flammable liquids or in gaseous or explosive atmospheres.

• Keep all tools and tool accessories away from children and all unauthorized personnel. Serious injury or possible death may result from machines being handled by children.

• Properly store machines and accessories while not in use. They should be kept in a dry, locked-up location out of reach of children or unauthorized personnel.

• Improper or negligent use of tools will cause increased maintenance costs, and the amount of time in which to complete the job. Always let the tool do the work at the rate of which it was designed. Best performance is always achieved by reading and understanding the proper operation of each machine or tool.

• Always wear safety glasses and protective hand and foot wear during or around operating tools. Wear a protective hair covering to contain long hair. Do not wear loose clothing and/or accessories as they may be caught in moving parts and inflict serious injury or possible death.

• Wear respiratory protection when working in an environment where dust particles are generated during operation.

• Do not over-reach or allow yourself to become unstable during tool operation and always maintain a correct posture.

• Use clamps or a vise to secure the work piece tightly and eliminate vibration. Never hold the work piece with your hands, keep both hands on the tool for increased productivity.

• Use the right tool or machine that can complete the job within its specifications. Do not attempt to adapt smaller machines or tools to complete a job designed for heavy-duty equipment. Do not use the tools for other than what they were designed for. There is a right tool for each job, be aware of tool limitations and never overload.

• Make sure to inspect all external screws, nuts, bolts and attached accessories are fastened tightly and secure prior to each use. All moving parts should be free from obstruction and allowed to operate smoothly. Any damaged or missing parts should be repaired or replaced by the sales agent or distributor from which the tool was originally purchased. Do not use machines or tools which cannot be activated or stopped with a power switch or lever.

• Do not use any machine with a damaged, frayed, cut, or deteriorated power cords or air hoses. Always replace at the first sign of damage.

• Always remove all tools required to adjust, add, or remove parts from tools prior to use to prevent tool damage or user injury.

• Always avoid an unexpected start by having all power buttons or levers in the off position prior to attaching to a power or air supply. Never carry tools with your finger on the on/off switch or lever when the power or air supply is attached.

• Do not use the power or air supply lines to move, carry or support the tool during usage or transportation. Do not place the power or air line near a heat source, oil, water, or items with sharp edges.

• Never leave a machine or tool running unattended. Keep a firm grip on the designated areas of the machine or tool until it comes to a complete stop. Always turn the power switch or lever to the off position and disconnect from the power source when not in use.

• Do not disassemble or modify a tool to complete a job other than what it was designed for. This will void any warranty on the equipment and may cause serious personal injury or possible death.

• Maintenance is necessary for all machines and tools. Always maintain blades and cutters properly and replace when edges become damaged or are not sharp enough for safe operation. Follow the instruction manual for lubrication needs and adjustment points if applicable. Check the power and air supply lines periodically and change accordingly to safety regulations. If an extension line is adopted, always make sure that it meets or exceeds tool requirements for amperage or air supply before using and is rated for outdoor usage. Change supply lines whenever they are found to be defective or damaged. Keep the grip and handles dry and clean of grease or oil so that it will not disturb proper operation.

• Switch off and disconnect from power source before servicing equipment or changing accessories.

• Be alert and pay close attention to the work being performed at all times. Do not operate machines or tools when heavily fatigued. Users should be aware of all circumstances surrounding their application.

• Use only recommended parts and accessories as per individual machine or tool operator manuals. Use of improper accessories or attachments may result in serious injury or possible death.

• All repairs and services must be performed by authorized Nitto Kohki dealers or technicians.

• Do not deface or remove any label, warning indicator, or nameplate associated with each machine or tool.

• The power source must be limited to the individual tools specifications as stated on the nameplate or instruction manual.

• Make sure that all machine and power tools are properly grounded at all times (excludes double-insulated tools). Always use a GFCI (Ground-Fault-Circuit- Interrupt) to protect the user and surrounding persons from electric shock.

• Be aware of low voltage situations. Improperly gauged extension cords or power cords used or shared with other electrical devices will cause all tools on the line to not run at optimal performance. This condition may result in damage to the machine and/or operator.

30

This catalog is printed using environmentallyfriendly paper and vegetable oil inks.

Printed in Japan 15FW05- 1Specifications and designs are subject to change at any time without notice.

POWER TOOLS

ISO 9001ISO 14001

ISO 9001JQA-2042Machine Tools DivisionISO 14001JQA-EM4057NITTO KOHKI CO., LTD.

Overseas Affiliates / Offices

DISTRIBUTED BY

NITTO KOHKI U.S.A., INC.46 CHANCELLOR DRIVE, ROSELLE, IL 60172, U.S.A.For Machine ToolsTel : +1-630-924-9393 Fax : +1-630-924-0303For CuplasTel : +1-630-924-5959 Fax : +1-630-924-1174www.nittokohki.com

NITTO KOHKI EUROPE CO., LTD.UNIT A5, LANGHAM PARK INDUSTRIAL ESTATE, MAPLE ROAD,CASTLE DONINGTON, DERBYSHIRE DE74 2UT, UNITED KINGDOMTel : +44-1332-653800 Fax : +44-1332-987273www.nitto-kohki.eu/en

NITTO KOHKI DEUTSCHLAND GMBHGOTTLIEB-DAIMLER-STR. 10, 71144 STEINENBRONN, GERMANYTel : +49-7157-989555-0 Fax : +49-7157-989555-40www.nitto-kohki.eu/de

NITTO KOHKI AUSTRALIA PTY LTD77 BRANDL STREET BRISBANE TECHNOLOGY PARKEIGHT MILE PLAINS QLD 4113, AUSTRALIATel : +61-7-3340-4600 Fax : +61-73340-4640www.nitto-australia.com.au

NITTO KOHKI (SHANGHAI) CO., LTD.ROOM1506, SUITE C, ORIENT INTERNATIONAL PLAZA,NO.85 LOUSHANGUAN ROAD, SHANGHAI 200336 CHINATel : +86-21-6415-3935 Fax : +86-21-6472-6957www.nitto-kohki.cn

NITTO KOHKI (SHANGHAI) CO., LTD. SHENZHEN BRANCH2005C SHENZHEN ICC TOWER, FUHUASANLU 168,FUTIAN DISTRICT,SHENZHEN, GUANGDONG, 518048 CHINATel : +86-755-8375-2185 Fax : +86-755-8375-2187www.nitto-kohki.cn

NITTO KOHKI CO., LTD. SINGAPORE BRANCH10 UBI CRESCENT #01-62, UBI TECHPARK LOBBY D,SINGAPORE 408564Tel : +65-6227-5360 Fax : +65-6227-0192www.nitto-kohki.co.jp/e/nksb/index.html

NITTO KOHKI CO., LTD. BANGKOK REPRESENTATIVE OFFICEM&A BUSINESS CENTER, Q-HOUSE CONVENT BLDG.,38 CONVENT RD., SILOM, BANGRAK,BANGKOK 10500 THAILANDTel : +66-2632-0307 Fax : +66-2632-0308www.nittobkk.com

NITTO KOHKI CO., LTD.Head Office9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanTel : +81-3-3755-1111 Fax : +81-3-3753-8791 E-mail : [email protected]

www.nitto-kohki.co.jp/eWeb

Tk083q Pneumatic & Electric POWER TOOLS - Nitto Kohki€¦ · · 2015-12-10MACHINE TOOLS SAFETY GUIDE Pneumatic & Electric Power Tools, ... PNEUMATIC RECIPROCATING SANDER LINE SANDER

Documents