Thermal Conductive Gel - LiPOLY TIM · 2019. 7. 16. · Surface tack 2-side/1-side 2 - - Thickness 0.3~15 ASTM D374 mm Density 2.4 ASTM D792 g/cm3 Hardness 15 ASTM D2240 Shore A Application

PK223Thermal Conductive Gel

Features-• Thermal conductivity: 2.0 W/m*K • Naturally tacky for ease of manufacture • Highly compliant• Low thermal impedance• Available in a range of thicknesses

Typical Applications-• Notebook computers • Heat pipe assemblies • Memory modules • TV hardware • Automotive electronics • Mobile devices • High speed mass storage drives• Set-top box • IP CAM

Specifications-• Sheet form • Die-cut parts

LiPOLY PK223 is a soft thermally conductive gap filler. With a thermal conductivity of 2.0 W/m*K and a low thermal impedance, PK223 is suitable for a wide range of applications. This product can be supplied as standard sheets, custom die-cuts or custom molded parts making it suitable for a wide range of applications. PK223 is also UL 94V-0 approved and REACH and RoHS compliant.

PROPERTY PK223 TEST METHOD UNIT

Color White Visual -

Surface tack 2-side/1-side 2 -

Thickness 0.5~5.0 ASTM D374 mm

Density 2.1 ASTM D792 g/cm3

Hardness 30 ASTM D2240 Shore 00

Application temperature -60~200 - ℃

COMPRESSION 1.0mm 2.0mm

Deflection @10 psi 18 32 - %

Deflection @20 psi 24 45 - %

Deflection @30 psi 30 52 - %

Deflection @40 psi 35 58 - %

Deflection @50 psi 38 62 - %

ELECTRICAL

Dielectric breakdown >14 ASTM D149 KV/mm

Surface resistivity >1010 ASTM D257 Ohm

Volume resistivity >1010 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 2 ASTM D5470 W/m*K

Thermal impedance@10 psi 0.84 ASTM D5470 ℃-in2/W

Thermal impedance@30 psi 0.77 ASTM D5470 ℃-in2/W

Thermal impedance@50 psi 0.70 ASTM D5470 ℃-in2/W

FLAME RATING

UL Flammability class V-0 UL94 -

Typical Properties-

PK404Thermal Conductive Gel

Features-• Thermal conductivity: 4.0 W/m*K • Naturally tacky for ease of manufacture • Highly compliant• Low thermal impedance• Available in a range of thicknesses

Typical Applications-• Notebook computers • Heat pipe assemblies • Memory modules • TV hardware • Automotive electronics • Mobile devices • High speed mass storage drives• Set-top box • IP CAM

Specifications-• Sheet form • Die-cut parts

LiPOLY PK404 is a soft thermally conductive gap filler. With a thermal conductivity of 4.0 W/m*K and a low thermal impedance, PK404 is suitable for a wide range of applications. This product can be supplied as standard sheets, custom die-cuts or custom molded parts making it suitable for a wide range of applications. PK404 is also UL 94V-0 approved and REACH and RoHS compliant.

PROPERTY PK404 TEST METHOD UNIT

Color Blue Visual -

Surface tack 2-side/1-side 2 -

Structure - -

Thickness 0.5~5.0 ASTM D374 mm

Density 2.8 ASTM D792 g/cm3

Hardness 40 ASTM D2240 Shore 00

Application temperature -60~200 - ℃

COMPRESSION 1.0mm 2.0mm

Deflection @10 psi 15 36 - %

Deflection @20 psi 19 46 - %

Deflection @30 psi 27 53 - %

Deflection @40 psi 34 56 - %

Deflection @50 psi 40 61 - %

ELECTRICAL

Dielectric breakdown >13 ASTM D149 KV/mm

Surface resistivity >1010 ASTM D257 Ohm

Volume resistivity >1010 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 4 ASTM D5470 W/m*K

Thermal impedance@10 psi 0.51 ASTM D5470 ℃-in2/W

Thermal impedance@30 psi 0.41 ASTM D5470 ℃-in2/W

Thermal impedance@50 psi 0.36 ASTM D5470 ℃-in2/W

FLAME RATING

UL Flammability class V-0 UL94 -

Typical Properties-

PK605Thermal Conductive Gel

Features-• Thermal conductivity: 6.0W/m*K • Low thermal impedance • Naturally tacky for ease of manufacture • High breakdown voltage• UL 94V-0 qualified

Typical Applications-• Notebook computers • Heat pipe assemblies • Memory modules • TV hardware • Automotive electronics • Mobile devices • High speed mass storage drives• Set top box • IP CAM

Specifications-• Sheet form • Die-cut parts

LiPOLY PK605 is a 6.0 W/m*k gap filler designed to offer the combination of high thermal conductivity, ease of manufacture and economic pricing needed for today's most demanding of applications. This product can be supplied as standard sheets, custom die-cuts or custom molded parts making it suitable for a wide range of applications. PK605 is also UL 94V-0 approved and REACH and RoHS compliant.

PROPERTY PK605 TEST METHOD UNIT

Color Red Visual -

Surface tack 2-side/1-side 2 -

Thickness 0.5~5.0 ASTM D374 mm

Density 3.2 ASTM D792 g/cm3

Hardness 60 ASTM D2240 Shore 00

Application temperature -60~180 - ℃

COMPRESSION 1.0mm 2.0mm

Deflection @10 psi 8 10 - %

Deflection @20 psi 12 20 - %

Deflection @30 psi 14 32 - %

Deflection @40 psi 17 40 - %

Deflection @50 psi 19 46 - %

ELECTRICAL

Dielectric breakdown >10 ASTM D149 KV/mm

Surface resistivity >1011 ASTM D257 Ohm

Volume resistivity >1010 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 6 ASTM D5470 W/m*K

Thermal impedance@10 psi 0.37 ASTM D5470 ℃-in2/W

Thermal impedance@30 psi 0.32 ASTM D5470 ℃-in2/W

Thermal impedance@50 psi 0.26 ASTM D5470 ℃-in2/W

FLAME RATING

UL Flammability class V-0 UL94 -

Typical Properties-

PK700Thermal Conductive Gel

Features-• Thermal conductivity: 7.0 W/m*K • Low thermal impedance • High dielectric breakdown voltage • Designed for manufacture• Naturally tacky

Typical Applications-• Notebook computers • Heat pipe assemblies • TV hardware • Wireless communication hardware • High speed mass storage drives• Set-top box • IP CAM

Specifications-• Sheet form • Die-cut parts

LiPOLY PK700 is a thermally conductive gap filler. With a thermal conductivity of 7.0 W/m*K and a low thermal impedance, PK700 is suit-able for a wide range of applications. This product can be supplied as standard sheets, custom die-cuts or custom molded parts making it suitable for a wide range of applica-tions. PK700 is also UL 94V-0 approved and REACH and ROHS

PROPERTY PK700 TEST METHOD UNIT

Color Gray Visual -

Surface tack 2-side/1-side 2 -

Thickness 1.0~3.0 ASTM D374 mm

Density 3.3 ASTM D792 g/cm3

Hardness 55 ASTM D2240 Shore 00

Application temperature -60~180 - ℃

COMPRESSION 1.0mm 2.0mm

Deflection @10 psi 9 11 - %

Deflection @20 psi 14 22 - %

Deflection @30 psi 19 33 - %

Deflection @40 psi 23 40 - %

Deflection @50 psi 26 44 - %

ELECTRICAL

Dielectric breakdown 10 ASTM D149 KV/mm

Surface resistivity >1011 ASTM D257 Ohm

Volume resistivity >1010 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 7 ASTM D5470 W/m*K

Thermal impedance@10 psi 0.32 ASTM D5470 ℃-in2/W

Thermal impedance@20 psi 0.27 ASTM D5470 ℃-in2/W Thermal impedance@30 psi 0.25 ASTM D5470 ℃-in2/W Thermal impedance@40 psi 0.23 ASTM D5470 ℃-in2/W Thermal impedance@50 psi 0.21 ASTM D5470 ℃-in2/W FLAME RATING

UL Flammability class V-0 UL94 -

Typical Properties-

S282Thermal Conductive Pad

Features-• Thermal conductivity: 1.7 W/m*K • Designed for manufacturing • High dielectric breakdown• Shock and vibration absorber • Good mechanical strength• Fiberglass reinforced • UL 94V-0 qualified

Typical Applications-• Between a component and heat sink • Flat-panel displays • LED, HDDs, DVDs • Heat pipe assemblies • Memory modules • Power supplies

Specifications-• Sheet form • Die-cut parts

LiPOLY S282 is a thermally conductive interface pad. With a thermal conductivity of 1.7 W/m*K and a fiberglass reinforcement layer. S282 is designed for robust manufacturing operations. In addition to a superior dielectric breakdown voltage, S282 provides excellent stress and vibration damping.

PROPERTY S282 TEST METHOD UNIT

Color Pink Visual -

Surface tack 2-side/1-side 1 - -

Structure Fiberglass - -

Thickness 0.3~15 ASTM D374 mm

Density 2.1 ASTM D792 g/cm3

Hardness 4 ASTM D2240 Shore A

Application temperature -60~200 - ℃

Tensile Strength. 150 ASTM D412 Psi

COMPRESSION 1.0mm 2.0mm

Deflection @10 psi 3 11 - %

Deflection @20 psi 6 24 - %

Deflection @30 psi 10 30 - %

Deflection @40 psi 15 33 - %

Deflection @50 psi 18 38 - %

ELECTRICAL

Dielectric breakdown >15 ASTM D149 KV/mm

Surface resistivity >1010 ASTM D257 Ohm-m

Volume resistivity >1011 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 1.7 ASTM D5470 W/m*K

Thermal impedance@10 psi 1.77 ASTM D5470 ℃-in2/W

Thermal impedance@30 psi 1.69 ASTM D5470 ℃-in2/W

Thermal impedance@50 psi 1.64 ASTM D5470 ℃-in2/W

FLAME RATING

UL Flammability class V-0 UL94 -

Typical Properties-

S393Thermal Conductive Pad

Features-• Thermal conductivity: 2.2 W/m*K • Designed for manufacturing • High dielectric breakdown• Shock and vibration absorber • Good mechanical strength • UL 94V-0 qualified

Typical Applications-• Between a component and heat sink • Flat-panel displays • LED, HDDs, DVDs • Heat pipe assemblies • Memory modules • Power supplies

Specifications-• Sheet form • Die-cut parts

LiPOLY S393 is a thermally conductive interface pad. With a thermal conductivity of 2.2 W/m*K, S393 provides great thermal conductivity. In addition to its outstanding electrical insulating properties, S393 provides excellent stress and vibration damping and increases the contact area by conforming to uneven surfaces.

PROPERTY S393 TEST METHOD UNIT

Color Light green Visual -

Surface tack 2-side/1-side 2 - -

Thickness 0.3~15 ASTM D374 mm

Density 2.4 ASTM D792 g/cm3

Hardness 15 ASTM D2240 Shore A

Application temperature -60~200 - ℃

Tensile Strength. 80 ASTM D412 psi

COMPRESSION 1.0mm 2.0mm

Deflection @10 psi 4 9 - %

Deflection @20 psi 7 22 - %

Deflection @30 psi 12 27 - %

Deflection @40 psi 16 30 - %

Deflection @50 psi 20 33 - %

ELECTRICAL

Dielectric breakdown 10 ASTM D149 KV/mm

Surface resistivity >1010 ASTM D257 Ohm

Volume resistivity >1011 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 2.2 ASTM D5470 W/m*K

Thermal impedance@10 psi 1.29 ASTM D5470 ℃-in2/W

Thermal impedance@30 psi 1.24 ASTM D2470 ℃-in2/W

Thermal impedance@50 psi 1.16 ASTM D5470 ℃-in2/W

FLAME RATING

UL Flammability class V-0 UL94 -

Typical Properties-

S818Thermal Conductive Pad

Features-• Thermal conductivity: 3.2/5.0 W/m*K • Designed for manufacturing • High dielectric breakdown• Shock and vibration absorber • Good mechanical strength • UL 94V-0 qualified

Typical Applications-• Between a component and heat sink • Flat-panel displays • LED, HDDs, DVDs • Heat pipe assemblies • Memory modules • Power supplies

Specifications-• Sheet form • Die-cut parts

LiPOLY S818 is a thermally conductive interface pad. With a thermal conductivity of 3.2 and 5.0 W/m*K, S818 provides great thermal conductivity. In addition to its outstanding electrical insulating properties, S818 provides excellent stress and vibration damping and increases the contact area by conforming to uneven surfaces.

PROPERTY S818 S818G TEST METHOD UNIT

Color Brown Gray Visual -

Surface tack 2-side/1-side 0 0 - -

Thickness 0.5 0.5 ASTM D374 mm

Density 2.5 2.5 ASTM D792 g/cm3

Hardness 18 25 ASTM D2240 Shore A

Application temperature -60~200 -55~200 - ℃

Tensile Strength. 80 90 ASTM D412 psi

COMPRESSION 1.0mm 2.0mm 1.0mm 2.0mm

Deflection @10 psi 2 6 2 5 - %

Deflection @20 psi 3 13 2 9 - %

Deflection @30 psi 7 17 6 12 - %

Deflection @40 psi 10 20 8 14 - %

Deflection @50 psi 14 23 10 16 - %

ELECTRICAL

Dielectric breakdown >12 >10 ASTM D149 KV/mm

Surface resistivity >1014 >1011 ASTM D257 Ohm

Volume resistivity >1011 >1011 ASTM D257 Ohm-m

THERMAL

Thermal Conductivity 3.2 5 ASTM D5470 W/m*K

Thermal impedance@10 psi 0.81 0.58 ASTM D5470 ℃-in2/W

Thermal impedance@30 psi 0.78 0.55 ASTM D5470 ℃-in2/W

Thermal impedance@50 psi 0.76 0.52 ASTM D5470 ℃-in2/W

FLAME RATING

UL Flammability class V-0 V-0 UL94 -

Typical Properties-

PK223PK404PK605PK700S282S393S818