Top Banner

Click here to load reader

The Elmo Document Camera Install/Use Instructions

Jan 11, 2016

ReportDownload

Documents

mateo

The Elmo Document Camera Install/Use Instructions. Ted Trueblood Tri-C. Cords from Document Camera. Make sure power cable is plugged into “DC” outlet in back as shown. Make sure yellow video cable is plugged into the video outlet. The Next Step…. - PowerPoint PPT Presentation

  • The Elmo Document Camera Install/Use InstructionsTed TruebloodTri-C

  • Cords from Document CameraMake sure power cable is plugged into DC outlet in back as shown.Make sure yellow video cable is plugged into the video outlet.

  • The Next StepPlug power cord into nearest available outlet.Underneath your desk, plug yellow video cable into A/V outlet as shown.

    Only the top is for the camerathe other two are for sound.

  • Output SwitchOn the back, flip the left output switch to video.It may be necessary to use a pen or a small flat screwdriver.

  • SetupPlace the camera on a convenient location on your desk, and place white document tray underneath as shown.

  • Power OnTurn the camera on by pressing power(photo on left).Turn the camera to the camera setting (photo on right).

  • Put your Image on the ScreenWith your projector turned on, select the video function. Whatever is on the white tray should show up on the screen.

    The zoom in/out and the light functions are labeled on the right.

    ZoomLight

  • Saving Your Work (Optional)Insert an SD media card into the slot shown, and push the camera icon on the document camera.

    If you want to save from the camera to your computer, connect the USB cable from the port as shown to your computer.

    On the menu settings for the document camera, select usb mode, then mass storage.

    ********