Test Equipment Solutions DatasheetTest Equipment Solutions Datasheet Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of quality test & measurement

Test Equipment Solutions Datasheet

Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of quality test & measurement (T&M) equipment. We stock all major equipment types such as spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.

We are focused at the professional end of the marketplace, primarily working with customers for whom high performance, quality and service are key, whilst realising the cost savings that second user equipment offers. As such, we fully test & refurbish equipment in our in-house, traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2 year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of combined experience, which enables us to deliver industry-leading service and support. We endeavour to be customer focused in every way right down to the detail, such as offering free delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan unit, if available) and supplying a free business tool with every order.

As well as the headline benefit of cost saving, second user offers shorter lead times, higher reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off balance sheet accounting. Both second user and rental improve the key business measure of Return On Capital Employed.

We are based near Heathrow Airport in the UK from where we supply test equipment worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house Lab.

All products supplied by Test Equipment Solutions include:

- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).- Free loan equipment during warranty repair, if available.- Full electrical, mechanical and safety refurbishment in our in-house Lab.- Certificate of Conformance (calibration available on request).- Manuals and accessories required for normal operation.- Free insured delivery to your UK mainland address (sales).- Support from our team of seasoned Test & Measurement engineers.- ISO9001 quality assurance.

Test equipment Solutions LtdUnit 8 Elder WayWaterside DriveLangleyBerkshireSL3 6EP

T: +44 (0)1753 596000F: +44 (0)1753 596001

Email: [email protected]: www.TestEquipmentHQ.com

www.testequipmenthq.com

Agilent Technologies

Optical Component Test

Agilent Lightwave Mainframes

Faster reaction times in alignment and adjustment applications

Significantly shorter measurement and data transfer times

Faster measurement data transfer in remote applications

Reduced test times and cost of test

Elimination of associated costs andtime-consuming setup

Flexibility & Scalability


ErgonomicColor, high-contrast, brightness, lowreflection display and a wide viewingangle is key for benchtop applications.

EfficientOn top of the plug&play drivers theAgilent Photonic Foundation Libraryprovides a variety of application func-tions that increase the measurementperformance and reduce test imple-mentation cost.

Agilent Photonic Foundation Library

Optical Component TestAgilent 8163B Lightwave MultimeterAgilent 8164B Lightwave Measurement SystemAgilent 8166B Lightwave Multichannel System

FlexibleA free combination of the Agilentmodules allows to easily generate different measurement setups.

The system can be controlled eitherdirectly for benchtop, or with an exter-nal PC for remote applications. Internal applications (Loss overWavelength, Return Loss, Logging,Stability) can be used directly.

FastThe Agilent Lightwave mainframes areoptimized for test speed and thereforeminimize test cost.

ScalableHigh and low channel applications canbe addressed by the easy extendabili-ty of the mainframes. “The right formfactor” for each setup!

The Agilent Optical Component Test Platformfor flexible and scalable test solutions withsmall footprint


Agilent 8164B Lightwave Measurement System

Optical Component TestThe Agilent Flexible Test Platforms help Reduce EngineeringEffort with a Modular Concept.

AttenuatorModules

Return LossModules

Power SensorModules

Optical Heads

Agilent 8163B Lightwave MultimeterAgilent 8166B Lightwave

Multichannel System

Tunable Laser Modules(only for 8164B)

Fast and easy-to-read measurement valueson the high-resolution color display

Compact Tunable LaserModules

DistributedFeedback (DFB)Laser Modules

Agilent 8163B, 8164B and 8166Bmainframes address different measu-rement needs for passive and activelightwave components with high portflexibility. The Agilent 8163B mainfra-me features dedicated benchtop appli-cations with direct user interactions.

The Agilent 8164B is optimized fortesting devices such as multiplexersand demultiplexers, fiber bragg gra-tings, or thin film filters. A test set upwith the Agilent 8166B is ideal forhigh port device and optical amplifiertest. Internal applications (Loss overWavelength, Return Loss, Logging,Stability) can be used directly.

Fabry PerotLaser Modules


Tunable Laser

81600B, 81480B, 81640B, 81680B

Tunable Laser

81672B, 81482B, 81642B, 81682B,

Compact Tunable Laser

81649A, 81689A/B

Distributed Feedback (DFB) Laser

81662A, 81663A

Fabry-Perot Laser

Power Meter

8163xB

Optical Heads

Return Loss Modules

81610A, 81611A, 81612A

81613A, 81614A

Attenuator

81560A/61A,66A, 67A

81570A/71A/73A/76A/77A

Switches 8159x

Polarization Controller 8169A

Polarization Controller 11896A

Digital Communications Analyzer

(DCA)

Bit Error Ratio Tester (BERT)

SONET/SDH Tester

Optical Spectrum Analyzer (OSA)

Mainframes 8163A/B

8164A/B

8166A/B

All Parameter Test

Photonic Foundation Library

Passive Component Test Optical Amplifier Test Bit Error Ratio Test

Mux

/DeM

ux/V

-Mux

TFF

Test

FBG

Filt

er T

est

Conn

ecto

r Tes

t

Switc

h Te

st

TFF

Alig

n-/A

djus

tmen

t

Fibe

r to

AW

G A

lignm

ent/

AW

G C

hip

Test

Coup

er/S

plitt

er/C

ombi

ner

Isol

ator

/Circ

ulat

or

Varia

ble

Opt

ical

Att

enua

tor

Gai

n Fl

atte

ning

Filt

er

Dis

pers

ion

Com

pens

ator

s

Inte

rleav

er

EDFA

Ram

an A

mpl

ifier

s

SOA

Rx/

Tx

Line

Car

d

Syst

em T

est

By internet, phone, or fax, get assistance with all your test & measurement needs

For further information, please visit www.agilent.com/comms/comp-test

Netherlands: France: Italy: Germany: Spain: UK: Sweden:

(tel) +31-20-547 2110 (tel) +33-16453 5625 (tel) +39-02-9260 8206 (tel) +49-7031-464 3295 (tel) +34-91-631 3213 (tel) +44-118-927 6690 (tel) +46-8-444 8672

(tel) +31-20-547-2281

United States: Europe: Latin America: New Zealand: Asia Pacific: Canada: Japan: Australia:

(tel) 1 800 452 4844 (tel) (31 20) 547 2323 (tel) (305) 269 7500 (tel) 0 800 738 378 (tel) (852) 3197 7777 (tel) 1 877 894 4414 (tel) (81) 426 56 7832 (tel) 1 800 629 485

(fax) (31 20) 547 2390 (fax) (305) 269 7599 (fax) 64 4 495 8950 (fax) (852) 2506 9284 (fax) (905) 282-6495 (fax) (81) 426 56 7840 (fax) (61 3) 9210 5947

Product specifications and descriptions in this document subject to change without notice.

Printed May 6th, 2002

Copyright © 2001 Agilent Technologies

5988-3989EN

Optical

Component Test

Test Innovations That Improve Your Bottom Line


This guide provides configuration details for the Agilent 816xB family of mainframes and modules, including options and accessories.

Agilent Lightwave Solution Platform Configuration Guide May 2005


Page 2 of 16

8163B Lightwave Multimeter Main features:

• Ideal for laboratory and portable usage

• 2 compact module slots

• Built in applications: Return Loss, Passive Component Test, Stability, Logging

• GPIB Interface for remote control

• Full backward compatibility for 815xx and 816xx series modules.

8164B Lightwave Measurement System Main features:

• Ideal for laboratory or rack mount usage for state-of-the-art applications

• 1 extended module slot for back-loadable tunable laser sources


• Built in applications: Passive Component Test, Stability, Logging

• Integrated floppy disk for direct setup and data access


• Full backward compatibility for 815xx and 816xx series modules.

8166B Lightwave Multichannel System Main features:

• Ideal for laboratory or rack mount usage for applications that require high port counts



• Backward compatibility for 8156x, 8157x, 8159x and 816xx series modules.

Mainframe and Module Firmware: → For Firmware upgrades and download tools see http://www.agilent.com/comms/octfirmware


Page 3 of 16

Module compatibility 8163B Slots 1 – 2 8164B Slot 0 8164B Slots 1 – 4 8166B Slots 1 – 17

81600B TLS family #200, #160, #150, #140, #130 low SSE #142, #132 high power

page 4 page 4

X X

81980A compact TLS 81940A compact TLS 81989A compact TLS 81949A compact TLS 81944A compact TLS

page 5 page 5 page 5 page 5 page 5

X X X X X

X X X X X

X X X X X

81662A DFB source module 81663A DFB source module

page 6 page 6

X X

X X

X X

81650A FP source module 81651A FP source module 81654A FP source module 81655A FP source module 81656A FP source module 81657A FP source module

page 7 page 7 page 7 page 7 page 7 page 7

X X X X X X

X X X X X X

X X X X X X

81630B power measurement module 81634B power measurement module 81635A power measurement module 81636B power measurement module

page 8 page 8 page 8 page 8

X X X X

X X X X

X X X X

81618A interface module 81619A dual interface module

81623B optical head 81624B optical head 81626B high power optical head 81628B high power optical head with integrating sphere

page 9/10 page 9/10

page 9 page 9 page 9

page 10

X X

X X X

X

X X

X X X

X

X X

X X X

X

81610A return loss module 81613A return loss module

page 11 page 11

X X

X X

X X

81570A attenuator module (SM) 81571A attenuator module (SM) 81576A attenuator module with p/c 81577A attenuator module with p/c 81578A attenuator module (MM)

page 12 page 12 page 12 page 12 page 12

X X

X (dual) X (dual)

X

X X

X (dual) X (dual)

X

X X

X (dual) X (dual)

X

81591B optical switch module 1x2 81594B optical switch module 2x2 81595B optical switch module 1x4

page 13 page 13 page 13

X X X

X X X

X X X

Legacy Module compatibility The discontinued 8163A, 8164A and 8166A mainframes are functionally compatible with the B versions. 8163B Slots 1 – 2 8164B Slot 0 8164B Slots 1 – 4 8166B Slots 1 – 17

814xxA/B backloadable TLS modules 816xxA/B backloadable TLS modules

X X

816xxA/B compact TLS modules X X X

Other 816xx series modules X X X

8156xA, 8157xA attenuator modules X X X

8159xA/S switch modules X X X

All other 815xx series modules X X


Page 4 of 16

81600B Tunable Laser Source family

Connector Interfaces for straight connectors

2 ea required for 81600B #200, 160, 150, 140, 130.

1 ea required for 81600B #142, 132.

81000FI FC/PC key width 2.2 mm 81000HI E-2000/PC 81000KI SC/PC 81000LI LC/PC 81000MI MU/PC 81000SI DIN 47256/PC 81000VI ST/PC

Connector Interface for angled connectors

2 ea required for 81600B #200, 160, 150, 140, 130.

1 ea required for 81600B #142, 132.

81000FI FC/APC key width 2.2 mm 81000NI FC/APC key width 2.0 mm 81000HI E-2000/APC 81000KI SC/APC 81000LI LC/APC 81000MI MU/APC 81000SI DIN 47256/APC, 81000VI ST/APC

Tunable Laser Sources Low SSE modules

81600B #200: 1440 nm – 1640 nm

81600B #160: 1495 nm – 1640 nm

81600B #150: 1450 nm – 1590 nm

81600B #140: 1370 nm – 1495 nm

81600B #130: 1260 nm – 1375 nm

Tunable Laser Sources High Power modules

81600B #142: 1370 nm – 1495 nm, +8.5 dBm

81600B #132: 1260 nm – 1375 nm, +9 dBm

81600B-071

PMF Straight contact connector

Tunable Laser Sources

Outputs: High Power

only

Note: 81600B - 072 is highly recommended over 81600B - 071 to reduce front-panel reflections, which will greatly reduce interference noise and spectral ripple in the test setup.

Connector Interfaces

for straight connectors

Connector Interfaces for angled connectors

For Laser Safety information see page 14

OPTIONAL

MANDATORY AND MUTUALLY EXCLUSIVE

81600B-072

PMF Angled contact connector

81600B-003 with built-in attenuator

(81600B #142 only)

Tunable Laser Sources

Outputs: Low SSE and High Power


Page 5 of 16

High Power Compact Tunable Laser Source modules

819xxA-072

PMF Angled contact

connector

Connector Interfaces for

angled connectors

High Power Compact

Tunable Laser Source module

819xxA-071

PMF Straight contact

connector

High Power Compact Tunable Laser module

81980A Compact Tunable Laser 1465 nm – 1575 nm 81940A Compact Tunable Laser 1520 nm – 1630 nm 81989A Compact Tunable Laser 1465 nm – 1575 nm 81949A Compact Tunable Laser 1520 nm – 1630 nm 81944A Compact Tunable Laser 1525 nm – 1625 nm for PMD tester system N3909A


1 ea required

81000FI FC/APC key width 2.2 mm 81000NI FC/APC key width 2.0 mm 81000HI E-2000/APC 81000KI SC/APC 81000LI LC/APC 81000MI MU/APC 81000SI DIN 47256/APC 81000VI ST/APC


Note: 819xxA - 072 is highly recommended over 819xxA - 071 to reduce front-panel reflections, which will greatly reduce interference noise and spectral ripple in the test setup.


1 ea required

81000FI FC/PC key width 2.2 mm 81000HI E-2000/PC 81000KI SC/PC 81000LI LC/PC 81000MI MU/PC 81000SI DIN 47256/PC 81000VI ST/PC


OPTIONAL



Page 6 of 16

DFB Source modules

Wavelength option


for angled contact connectors

81662A DFB Source, +10 dBm C- and L- band

81663A DFB Source, +13 dBm C-and L-band


1 ea required

81000FI FC/APC key width 2.2 mm 81000NI FC/APC key width 2.0 mm 81000HI E-2000/APC 81000KI SC/APC 81000LI LC/APC 81000MI MU/APC 81000SI DIN 47256/APC 81000VI ST/APC


OPTIONAL


DFB Source

Wavelength determined by option number

For special wavelengths, contact Agilent.


Page 7 of 16

Fabry-Perot Laser modules

FP High Power Source Modules 13 dBm

81655A 1310nm 81656A 1550 nm 81657A 1310/1550 nm

FP Standard Source Modules 3 dBm

81655A #E01 850 nm

FP Standard Source Modules 0 dBm

81650A 1310 nm 81651A 1550 nm 81654A 1310/1550 nm


1 ea required

81000FI FC/PC key width 2.2mm

81000HI E-2000/PC

81000KI SC/PC

81000LI LC/PC

81000MI MU/PC

81000SI DIN 47256/PC

81000VI ST/PC

Source Modules

SMF, Straight contact

interface


OPTIONAL

Connector

Interfaces for straight

connectors


Page 8 of 16

Optical Power Measurement modules

Optical Power measurement modules

81630B +28 dBm to –70 dBm

81634B +10 dBm to –110 dBm

81635A +10 dBm to –80 dBm (dual channel)

81636B +10 dBm to –80 dBm (Fast Power Sensor)


1 ea required for 81630B, 81634B, and 81636B

2 ea required for 81635A

81000FI FC/PC key width 2.2mm 81000NI FC/APC key width 2.0mm 81000KI SC/PC/APC 81000PI E-2000 PC/APC 81000SI DIN 47256 PC/APC 81000VI ST/PC/APC 81002LI LC/PC/APC 81002MI MU/PC/APC

81000BI Bare Fiber Connectivity Set for 81630B, 81634B Sensors (not to be used for 81635A and 81636B)

81004BH 10 Bare Fiber Holder for fibers <400µm diameter 81009BH 10 Bare Fiber Holder for fibers 400 - 900µm diameter

Note: All sensor inputs are non-contact and accept both straight and angled connectors.

(bare fiber)


OPTIONAL

Sensor Module

Interface (for both

angled & straight connectors).

Bare Fiber Connectivity (for 81630, 81634 series)

81000BI


Page 9 of 16

Optical Heads (5 mm sensor)

OPTIONAL

Connector Adapters (threaded)

81000BT Bare Fiber Connectivity Set (Threaded) 81000FA FC/PC/APC 81000KA SC/PC/APC 81000VA ST 81003LA LC 81000PA E-2000

Interface Modules

81618A Single Head Interface Module

81619A Dual Head Interface Module

Optical Heads

81623B Ge +10dBm to –80 dBm (spec for 750 – 1800nm)

81624B InGaAs +10dBm to –90 dBm

81626B InGaAs +27dBm to –70 dBm

Accessories

81624CE 4 m extension cable

81624DD additional D-shape quick change adapter

81624RM Half-rack Mount Kit for 2 Heads

81625RM Rack Mount Kit for 4 Heads

Connector Adapters (with integral D-Shape)

81624DD D-Shaped adapter not required

81000BC Bare Fiber Connectivity Set (D-shaped) 81001FA FC 81001KA SC 81001LA LC 81001MA MU 81001PA E-2000 81001ZA BLANK Adapter

Optical Heads for:

Connectorized Fiber, Bare Fiber and

Open beam NA ≤ 0.3

Interface Module

Filter / Holder

81010BL Lens for 1300/1550 nm, single mode

81050BL Lens for 1300/1550 nm, multi mode

Filter Holder

[1]

Connector Adapters

(threaded).

D-Shaped Adapter 81624DD (supplied with head)

For advanced accuracy see „Special Calibration“ options C01/02 and C85/86

Integral

D-Shaped Adapters


Page 10 of 16

High Power Optical Head (with integrating sphere)

OPTIONAL

Interface Modules

81618A Single Head Interface Module

81619A Dual Head Interface Module

Accessories

81624CE 4 m extension cable

High Power

Optical Head for: Connectorized Fiber,

Bare Fiber and Open beam NA ≤ 0.3

81628B InGaAs +40 dBm to –60 dBm

Connector Adapters

(threaded).

Interface Module

Connector Adapters (threaded)

81000BT Bare Fiber Connectivity Set (Threaded) 81000FA FC/PC/APC 81000KA SC/PC/APC 81000VA ST 81003LA LC 81000PA E-2000


Page 11 of 16

Return Loss modules For Laser Safety information see page 14

OPTIONAL

81610A Return Loss Module (without internal source)

81613A Return Loss Module (1310/1550 nm internal source)

Return Loss

Module

Angled contact interfaces


2 ea required for 81610A.

1 ea required for 81613A, (2 ea required if using external source input).

81000FI FC/APC key width 2.2 mm 81000NI FC/APC key width 2.0 mm 81000HI E-2000/APC 81000KI SC/APC 81000SI DIN 47256/APC 81000VI ST/APC 81000LI LC/APC 81000MI MU/APC

Reference Cable

81610CC Reference Cable – for calibration of all 8161xA Return Loss Modules

Connectors - DIN 47256/APC (connects to module) and FC/PC (supplied with calibrated return loss values to open air)

An 81000SI connector interface is required to connect this cable to the module.

This cable is used for calibration only, not for measurements.

Caution: Do not make physical contact to the FC/PC connector and do not attach another connector to it. This could change the calibrated (open) return loss values.

DIN 47256/APC FC/PC

Connector Interface for angled contacts

81610CC

or

Standard patch cord

81000UM 81000BR


Page 12 of 16

Optical Attenuator modules

OPTIONAL

Optical

Attenuator Angled Contact

Connectors

Optical Attenuators with Angled Contact Connectors

81571A (single slot) Optical Attenuator for high power

81577A (dual slot) Optical Attenuator with Power Control for high power

Connector Interfaces (input and output):

2 ea required

81000FI FC/APC key width 2.2 mm 81000NI FC/APC key width 2.0 mm 81000HI E-2000 APC 81000KI SC/APC 81000LI LC/APC 81000MI MU/APC 81000SI DIN 47256/APC 81000VI ST/APC

Optical Attenuators with Straight Contact Connectors

81570A (single slot) Optical Attenuator single-mode applications

81578A (single slot) Optical Attenuator multi-mode applications #050: 50µm fiber interface #062: 62.5µm fiber interface

81576A (dual slot) Optical Attenuator with Power Control for high power

Connector Interfaces (input and output):

2 ea required

81000FI FC/PC key width 2.2 mm 81000HI E-2000 PC 81000KI SC/PC 81000LI LC/PC 81000MI MU/PC 81000SI DIN 47256/PC 81000VI ST/PC

Connector Interface for

straight connectors

Connector Interface for

angled connectors

Optical

Attenuator Straight Contact

Connectors


Page 13 of 16

Optical Switch modules

OPTIONAL

Single-mode Optical Switch

with Angled Contact

FC/APC – R Connectors (key width

2.0mm)

Optical Switches (single-mode) with Angled Contact Connectors

81591B #009 (single slot) Optical switch 1x2 for single-mode applications



Optical Switches (multi-mode) with Straight Contact Connectors

81591B #062 (single slot) Optical switch 1x2 for multi-mode applications



Multi-mode Optical Switch

with Straight Contact

FC/PC Connectors


Page 14 of 16

Laser Safety Information

81613A 1310/1550nm RL

81650A 1310 nm FP

81651A 1550 nm FP

81654A 1310/1550 nm

The laser sources listed directly above are classified as Class 1 according to IEC 60825-1 (2001).

All laser sources comply with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated 2001-July-26.

81655A #E01 850 nm FP

81655A 1310 nm FP

81656A 1550 nm FP

81657A 1310/1550 nm FP

81662A C- and L-Band DFB

81663A C-band DFB

81600B #200 1440 nm – 1640 nm All-band TLS

81600B #140 1370 nm – 1495 nm low SSE TLS

81600B #150 1450 nm – 1590 nm low SSE TLS

81600B #160 1495 nm – 1640 nm low SSE TLS

81600B #130 1260 nm – 1375 nm low SSE TLS

81600B #132 1260 nm – 1375 nm high power TLS

81600B #142 1370 nm – 1495 nm high power TLS

81940A 1520 nm – 1630 nm compact TLS





All laser sources specified directly above are classified as Class 1M according to IEC 60825-1 (2001).

All laser sources comply with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated 2001-July-26.

CLASS 1 LASER PRODUCT(IEC 60825-1 / 2001)


Page 15 of 16

This page intentionally left blank


Agilent Technologies’ Test and Measurement Support, Services, and Assistance Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Support is available for at least five years beyond the production life of the product. Two concepts underlie Agilent's overall support policy: "Our Promise" and "Your Advantage."

Our Promise

Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are available.

Your Advantage

Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and on-site education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products.

By Internet, phone, or fax, get assistance with all your test & measurement needs

Online assistance:

www.agilent.com/comms/lightwave

Phone or Fax United States:

(tel) 1 800 829 4444 (fax) 1 800 829 4433

Canada:

(tel) 1 877 894 4414 (fax) 1 800 746 4866

Europe:

(tel) +31 20 547 2111 (fax) +31 20 547 2190

Japan:

(tel) 120 421 345 (fax) 120 421 678

Latin America:

(tel) +55 11 4197 3600 (fax) +55 11 4197 3800

Australia:

(tel) 800 629 485 (fax) 800 142 134

Asia Pacific:

(tel) + 852 800 930 871 (fax) + 852 800 908 476

Product specifications and descriptions in this document subject to change without notice. Copyright © 2005 Agilent Technologies September 19, 2005

5988-1571EN

For related literature, please visit:

www.agilent.com/comms/octmainframes


Test Equipment Solutions DatasheetTest Equipment Solutions Datasheet Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of quality test & measurement

Documents