Top Banner
TEMS Pocket 7.2 for Sony Ericsson W995 EDGE User’s Manual
130

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Apr 10, 2015

Download

Documents

Stone_fman

tems 10
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS™ Pocket 7.2 for Sony Ericsson W995 EDGE User’s Manual

Page 2: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

This manual is provided by Ascom Network Testing AB without any kind of warranty. Improvements and changes in this description due to typographical errors or inaccuracies in current information, or improvements to programs and/or equipment may be made by Ascom Network Testing AB at any time without notice. These changes will, however, be incorporated into new editions of this manual.

No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the copyrighted owner, Ascom Network Testing AB.

TEMS is a trademark of Ascom.

All other trademarks are the property of their respective holders.

© Ascom 2009. All rights reserved.

Publication number: LZT 138 0254 R1A

Page 3: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Contents

Contents

1. Introduction 1

1.1. What’s New in TEMS Pocket 7.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.1. New GSM Phone: Sony Ericsson W995 EDGE . . . . . . . . . . . 11.1.2. New GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2. What Was New in TEMS Pocket 7.0. . . . . . . . . . . . . . . . . . . . . . . . . 21.2.1. New Phones: Sony Ericsson C905, C905a . . . . . . . . . . . . . . 21.2.2. Map View and Pinpointing . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2.3. Data Views with Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2.4. Smarter Logfile Upload. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2.5. Cell Id Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2.6. Snapshots of Data Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2.7. Importing and Exporting TEMS Pocket Settings . . . . . . . . . . 3

2. Overview of TEMS Pocket 4

2.1. Data Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.1.1. Data Views with Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2. Map View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52.3. Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.4. Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.5. Logfiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.5.1. Logfile Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.5.2. GPS Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.5.3. Positioning by Pinpointing . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.6. Cell Control Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.7. Command Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.8. Storage Medium: Phone Memory vs. Memory Stick . . . . . . . . . . . . . 82.9. Language Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3. Data Views: General 9

3.1. General Data View Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

LZT 138 0254 R1A i

Page 4: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

3.2. The Built-in Help Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93.3. The Capture Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103.4. Other Data View Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103.5. Survey of Data Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Data Views in Text Format 13

4.1. PDP Context (View No. 1.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134.2. MM/GMM (View No. 1.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154.3. Time Log (View No. 1.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.3.1. Data View Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164.4. FTP Data (View No. 1.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.5. GPS (View No. 1.5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194.6. Map (View No. 1.6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194.7. GSM Cells (View No. 2.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.7.1. Data View Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.8. GSM Cell Id (View No. 2.2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.8.1. Data View Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244.9. GSM BA List (View No. 2.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.9.1. Data View Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244.10. GSM Serving Cell (View No. 3.1) . . . . . . . . . . . . . . . . . . . . . . 254.11. GPRS Data (View No. 3.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.11.1. Data View Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304.12. GPRS Info (View No. 3.3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314.13. GSM C/I Info (View No. 3.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324.14. GSM AMR (View No. 3.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334.15. The WAP Browser GPRS Data View . . . . . . . . . . . . . . . . . . . . . . 35

5. Data Views with Graphs 38

5.1. GSM Cells (View No. 4.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395.2. GSM Data (View No. 4.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6. The Map View 43

6.1. Loading a Map Image into the Map View . . . . . . . . . . . . . . . . . . . . 436.2. Pinpointing Your Test Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6.2.1. Setting the Map Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446.2.2. Customizing the Appearance of Route Markers . . . . . . . . . 446.2.3. Entering Map Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

ii

Page 5: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Contents

6.2.4. Pinpointing and Recording . . . . . . . . . . . . . . . . . . . . . . . . . . 456.3. Positioning the Map Geographically . . . . . . . . . . . . . . . . . . . . . . . . 47

7. TEMS Pocket Functions in the Activity Menu 48

7.1. Operational Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487.2. Insert Filemark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 487.3. Start/Stop Logfile Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

7.3.1. Icons Used for Logfile Recording . . . . . . . . . . . . . . . . . . . . . 497.4. Start/Stop Logfile Replay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

7.4.1. Replay Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . 507.4.2. Icons Used for Logfile Replay . . . . . . . . . . . . . . . . . . . . . . . 51

7.5. Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517.6. Start/Stop FTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517.7. Connect/Disconnect GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527.8. Start/Stop Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . 527.9. Pocket Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

8. The Pocket Menu 53

8.1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538.2. Cell Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

8.2.1. Icons Used for Cell Control . . . . . . . . . . . . . . . . . . . . . . . . . 548.2.2. Lock ARFCN GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548.2.3. Lock Band GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558.2.4. Voice Codec GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 558.2.5. Ignore Cell Barred . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 568.2.6. Reset Control Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

8.3. Events Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 568.3.1. Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

8.3.1.1. Viewing the Event Log. . . . . . . . . . . . . . . . . . . . . . . . 578.3.1.2. Clearing the Event Log . . . . . . . . . . . . . . . . . . . . . . . 588.3.1.3. Enabling/Disabling Event Logging and Sound . . . . . 588.3.1.4. Shortcuts to Event Settings and Event Counters . . . 58

8.3.2. Event Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 588.3.2.1. Viewing Event Settings . . . . . . . . . . . . . . . . . . . . . . . 588.3.2.2. Modifying Event Settings. . . . . . . . . . . . . . . . . . . . . . 59

8.3.3. Event Counters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 608.3.3.1. Viewing Event Counters . . . . . . . . . . . . . . . . . . . . . . 608.3.3.2. Resetting Event Counters . . . . . . . . . . . . . . . . . . . . . 61

8.3.4. Event Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

LZT 138 0254 R1A iii

Page 6: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.3.5. List of Logged Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628.3.5.1. CC Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628.3.5.2. MM Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 628.3.5.3. SM Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 638.3.5.4. GMM Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 648.3.5.5. RR Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658.3.5.6. Session Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

8.4. Data Views Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 678.5. GPS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

8.5.1. GPS Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 698.5.2. GPS Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 708.5.3. GPS Time Synch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

8.6. FTP Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 718.6.1. FTP Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 718.6.2. FTP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

8.7. Logfile Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 748.7.1. Save Logfile To . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758.7.2. Autostart Logfile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

8.7.2.1. Notes on Message Buffering: Pre-guard Period . . . . 768.7.2.2. Post-guard Period . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

8.7.3. Upload Logfile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 778.7.3.1. Setting an Upload Schedule . . . . . . . . . . . . . . . . . . . 78

8.7.4. Compress. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 798.7.5. FTP Resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808.7.6. FTP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

8.8. Command Sequence Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808.8.1. Voice Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 818.8.2. Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 818.8.3. FTP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

8.9. Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828.9.1. About Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 828.9.2. Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 838.9.3. Import Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 838.9.4. Export Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

8.10. General Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 858.10.1. WAP Data View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868.10.2. Data View Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868.10.3. Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878.10.4. Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878.10.5. Cell Id Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878.10.6. Power Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888.10.7. Measure Mode Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

iv

Page 7: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Contents

8.10.8. Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888.10.9. Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

9. Uploading TEMS Pocket Logfiles from the Phone File System 90

10. Battery Charging Considerations 92

10.1. Choice of Phone Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9210.2. Using the Phone’s Built-in GPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 9210.3. Using a TEMS Pocket Command Sequence . . . . . . . . . . . . . . . . 92

11. Support Contact Information 94

Appendix A. Parameter Values 95

A.1. Activate PDP Context Failure Cause . . . . . . . . . . . . . . . . . . . . . . . 95A.2. Automatic Upload Failure Cause . . . . . . . . . . . . . . . . . . . . . . . . . . 95A.3. CC Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96A.4. CCCH Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97A.5. Channel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98A.6. Deactivate PDP Context Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . 98A.7. GMM Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98A.8. GPRS Network Mode of Operation. . . . . . . . . . . . . . . . . . . . . . . . . 99A.9. GPS Fix Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99A.10. MM Cause. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100A.11. PDP Context Request Parameters . . . . . . . . . . . . . . . . . . . . . . . 100

A.11.1. Delay Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100A.11.2. Reliability Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101A.11.3. Peak Throughput . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101A.11.4. Precedence Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101A.11.5. Mean Throughput. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

A.12. Routing Area Update Failure Cause. . . . . . . . . . . . . . . . . . . . . . 102A.13. RR Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102A.14. RR Internal Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103A.15. SM Cause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

LZT 138 0254 R1A v

Page 8: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Appendix B. Graphic Representation of Parameter Values 105

B.1. C/I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105B.2. FER, RLC/LLC BLER/Retransmissions . . . . . . . . . . . . . . . . . . . . 105B.3. RLC DL/UL Throughput . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106B.4. RxLev . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106B.5. RxQual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106B.6. TX Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Appendix C. Default Settings in TEMS Pocket Menus 108

C.1. Operating Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108C.2. Cell Control Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108C.3. Events Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108C.4. Data Views Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108C.5. GPS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109C.6. FTP Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109C.7. Logfile Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109C.8. Command Sequence Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109C.9. Tools Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109C.10. General Settings Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Index 111

vi

Page 9: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 1. Introduction

1. Introduction

Welcome to TEMS Pocket.

TEMS Pocket is an advanced cellular network diagnostics tool built into a Sony Ericsson or Nokia phone. TEMS Pocket is suitable for day-to-day verification, maintenance and troubleshooting of cellular networks but is also handy for many cell planning tasks.

This document describes TEMS Pocket 7.2 (product packages Professional and Premium) as implemented in the Sony Ericsson W995 EDGE phone. A separate manual is provided for the Sony Ericsson W995 and W995a phones which support both GSM and WCDMA.

1.1. What’s New in TEMS Pocket 7.2TEMS Pocket 7.2 is a Sony Ericsson based release, the successor to TEMS Pocket 7.0. (TEMS Pocket 7.1 is a Nokia-based release.)

1.1.1. New GSM Phone: Sony Ericsson W995 EDGETEMS Pocket 7.2 is also available on the GSM-only version of the W995 phone, which is called Sony Ericsson W995 EDGE. Key features are:

• GSM/GPRS quad-band (850/900/1800/1900 MHz)

• EDGE Class 10

• 8.1 megapixel camera

• Integrated GPS

1.1.2. New GPSThe GPS that can optionally be ordered with TEMS Pocket 7.2 is the GlobalSat BT-359.

LZT 138 0254 R1A 1

Page 10: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

1.2. What Was New in TEMS Pocket 7.0

1.2.1. New Phones: Sony Ericsson C905, C905aTEMS Pocket 7.0 is implemented on the Sony Ericsson C905 and C905a phones. Their features include:

• GSM/GPRS quad-band

• 8.1 megapixel camera

• Integrated GPS

1.2.2. Map View and PinpointingThe map view was the principal new feature in TEMS Pocket 7.0. It allows users to pinpoint their route through a building on a floor plan. The setup is fast and easy:

• Obtain an image of the floor plan. For example, use the camera in the TEMS Pocket phone to take a photo of the emergency/evacuation plan displayed in the building.

• Load the picture as a background image in the Map view.

• Start pinpointing your position in the building. A logfile will be opened automatically. Pinpoint at regular intervals along the route and whenever you change direction.

• When you are done with the measurement, give a “Stop pinpointing” command. The logfile will close.

This is the full list of steps required to use the TEMS Pocket Map view. No messy or time-consuming preparations have been left out: none are needed.

Before post-processing the data, it just needs to be anchored to a geographical position. This is accomplished in a tick with a software utility accompanying TEMS Pocket. The logfiles are then ready to be loaded into TEMS Presentation or TEMS Investigation.

The map functionality is available as an option in the Professional package.

1.2.3. Data Views with GraphsTEMS Pocket 7.0 comes equipped with a set of graph views showing how radio parameters vary over time. These line charts were an entirely new

2

Page 11: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 1. Introduction

feature in TEMS Pocket 7.0, but they are similar to the ones found in TEMS Investigation and TEMS Presentation. All graphs come predefined and ready to use without any need for configuration.

1.2.4. Smarter Logfile UploadThe data upload process was improved: If the FTP connection goes down, the upload of a logfile can optionally be resumed from where it was interrupted instead of being restarted from the beginning. The new procedure cuts upload times and saves phone battery life, enhancing the efficiency and power of the tool.

1.2.5. Cell Id PresentationCell Identity data is presented in both idle and dedicated mode. This is achieved by buffering Cell Identities in idle mode and then correlating the buffered data with the phone’s position in dedicated/connected mode. The buffer is cleared when the phone is restarted.

1.2.6. Snapshots of Data ViewsA display snapshot function was added which enables you to capture TEMS Pocket data views in the form of bitmap images. The snapshot function is perfect for instantly capturing your own user’s view of the network. It can also be used to produce receipts handed in by staff to confirm completion of field measurement tasks. This too contributes to efficiency and reduces traveling expenses.

1.2.7. Importing and Exporting TEMS Pocket SettingsMore aspects of user configuration in TEMS Pocket can be saved to file: command sequence setups, user-configured map views, and more. Each setup is saved in a separate file which can be imported into the application on a later occasion. This functionality permits convenient distribution of test setups to multiple TEMS Pocket units.

LZT 138 0254 R1A 3

Page 12: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

2. Overview of TEMS Pocket

2.1. Data ViewsMost of the data displayed by TEMS Pocket is to be found in data views. When you turn the phone on for the first time, it will display the PDP Context data view:

On later occasions, when turned on, the phone will display the data view last inspected, provided that the TEMS Pocket operational mode is set to Active (see section 7.1).

The data views are divided into categories from 1 to 4. Each data view is numbered according to the format “x.y”, where “x” is the category and “y” the position of the data view within that category. You browse the categories by moving the navigation key left and right, and the data views within a category by moving the navigation key up and down. TEMS Pocket remembers the view last displayed in each category; when you return to a category, that view is shown.

The top section of the display preserves the ordinary signal strength and battery power level indicators as well as other symbols belonging to the regular user interface of the phone.

The top section of the display also shows:

• a symbol indicating that a logfile is being recorded (see section 7.3)

4

Page 13: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 2. Overview of TEMS Pocket

• a symbol indicating that a logfile is being replayed, and the status of the replay (see section 7.4.2)

• a symbol indicating that a cell control function is currently applied (see section 8.2)

• an icon for the latest TEMS Pocket event that occurred (if it occurred within the last 15 minutes; see section 8.3.4)

If the default phone display with the operator name appears instead of a TEMS Pocket data view, this is because TEMS Pocket has been put in background or inactive mode (see section 7.1). By default TEMS Pocket is in active mode, and all of its data views are visible.

The data views are exhaustively described in chapter 3.

2.1.1. Data Views with GraphsData views with graphs combine text-format content (similar to that of ordinary data views) with a line chart showing how one or several parameters vary over time. Like the text-only data views, the graph views are predefined. They are collected in category 4.

The top section of the display has precisely the same layout and behavior as in text-only data views. See section 2.1.

2.2. Map ViewThe Map view (no. 1.6) is used for pinpointing a test route on a floor plan or other map image. See section 2.5.3.

LZT 138 0254 R1A 5

Page 14: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

2.3. MenusWhen you press the Activity key on the phone, a tab with TEMS Pocket commands appears on top in the Activity menu:

Most of the commands in this menu are found only here. The menu is gone through in chapter 7.

From the Activity menu you can also access the Pocket menu, which is the chief means of configuring TEMS Pocket: see chapter 8. The Pocket menu can alternatively be accessed from the phone’s main menu: Settings → General → Pocket menu.

Note: TEMS Pocket settings are always saved in the phone’s internal memory. If the phone memory is full, TEMS Pocket settings can no longer be saved. You then need to remove some files to free up memory.

6

Page 15: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 2. Overview of TEMS Pocket

2.4. EventsEvents are generated and logged by TEMS Pocket to indicate that something interesting and worthy of note has occurred in the phone’s interaction with the cellular network.

The event log is inspected and managed from the Pocket menu. See section 8.3.1. A shortcut to the event log is found in the Activity menu.

2.5. Logfiles

2.5.1. Logfile RecordingYou can record data collected by TEMS Pocket in logfiles and replay these files in TEMS Pocket itself or in TEMS Investigation or TEMS Presentation. See sections 7.3, 7.4, and 8.7.

2.5.2. GPS PositioningTEMS Pocket supports positioning of data using GPS. You can use either the phone’s internal GPS or an external GPS unit that has been Bluetooth paired with the phone. See section 8.5.

2.5.3. Positioning by PinpointingIn an indoor environment or other location without GPS coverage, you can use the Map view (see section 2.2) to pinpoint your test route. You load an image of your testing area into the Map view, then indicate your route by marking waypoints on that map. The map image can also be assigned a geographical position. For the full details on these procedures, see chapter 6.

2.6. Cell Control FunctionsTEMS Pocket has a number of cell control functions for controlling the phone’s behavior in the cellular network. These include locking the phone to a band, cell, or channel. See section 8.2 for full details.

LZT 138 0254 R1A 7

Page 16: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

2.7. Command SequenceTEMS Pocket offers the use of a command sequence for automated testing of various services. See section 8.8.

2.8. Storage Medium: Phone Memory vs. Memory Stick

In general it is recommendable to use a memory stick rather than the phone’s internal memory as storage medium (for logfiles, FTP downloads, etc.). This is because the internal memory of the Sony Ericsson W995 EDGE is fairly small. The memory stick is the default choice in all dialogs where a storage medium needs to be selected.

2.9. Language SupportTEMS Pocket Sony Ericsson W995 EDGE phones support languages as follows:

• Regular phone user interface: Arabic, Chinese (Mandarin, simplified characters), Danish, English, French, Norwegian, Spanish, Swedish

• Pocket user interface

– Text display: English

– User input: English

8

Page 17: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 3. Data Views: General

3. Data Views: General

3.1. General Data View PropertiesAll data views have the same general structure in idle mode and dedicated/active mode.

Whenever a parameter is currently not valid, this is indicated in the data view by a dash “–” or a string of dashes.

Certain parameters are presented both numerically and graphically, the number appearing on top of a colored bar whose length and color depend on the parameter value. These parameters are tagged “numeric/graphic” in chapters 4 and 5. The rules for the graphic presentation are found in appendix B, page 105.

In the case of frequency hopping, the hopping list is shown one channel at a time, a new channel appearing every second.

3.2. The Built-in Help FunctionIf you press Options and select “Toggle help”, a callout box appears describing the piece of data in the top left corner of the screen. Use the navigation key to navigate the contents of the data view.

• To turn off the help function, press the “C” key. Alternatively, press Options and choose Toggle help again.

LZT 138 0254 R1A 9

Page 18: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

3.3. The Capture FunctionYou can take screenshots of any data view. To do this, you must first turn the screen capture function on (while in a data view) by selecting Options → Toggle capture.

Whenever the phone is in standby mode or during a voice call, you can now take a screenshot by pressing the Capture button. Please note that screenshots are always stored on the memory card (under Other\Pocket\Capture), so the phone must have one inserted.

A shutter sound is played when the screenshot is taken. Image files are named DV<X>-<Y>_<N>.bmp, where <X>-<Y> represent the data view number and <N> is a counter starting at 1. Up to 1000 screenshots of each data view can be stored.

3.4. Other Data View ActionsIn some data views you can perform an action relating to a piece of data shown in the view. For example, in data views listing cells, you can lock on one of the cells.

All data view actions are performed by pressing the Options button and choosing Data view actions. A submenu appears listing the available actions.

Specifics on data view actions are found in the subsequent sections.

10

Page 19: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 3. Data Views: General

3.5. Survey of Data Views

No. View Name Description Page

1.1 PDP Context Displays PDP addresses and PDP context settings for each address, including NSAPI and APN.

13

1.2 MM/GMM Displays identities such as TMSI,P-TMSI, and CGI of last registered network.

15

1.3 Time Log Displays time spent by the phone in various states (MM states; idle/dedicated).

16

1.4 FTP Data Displays information on the current FTP session, such as FTP server address, throughput, and transferred byte count.

17

1.5 GPS Displays essential GPS data: latitude and longitude, altitude and speed, number of satellites, fix quality, time and date.

19

1.6 Map Not a data view (but has a number). See chapter 6.

43

2.1 GSM Cells Displays ARFCN, BSIC, RxLev, C1/C31, and C2/C32 for the serving cell and each neighbor. Also presents system information data for cell access, selection, and location.

20

2.2 GSM Cell Id Displays ARFCN, LAC, CI, and RxLev for the serving cell and each neighbor. Also presents system information data for cell access, selection, and location.

23

LZT 138 0254 R1A 11

Page 20: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

2.3 GSM BA List Displays the GSM BA neighbor list as received from the network and shows which BCCH ARFCN the list was received from.

24

3.1 GSM Serving Cell

Displays system information data on serving cell depending on mode (idle/connected). Note: TMSI, P-TMSI, and TLLI are not found here but in the MM/GMM data view (1.2).

25

3.2 GPRS Data Displays traffic channel ARFCN, timeslots and coding schemes used, and LLC and RLC/MAC performance on uplink and downlink.

28

3.3 GPRS Info Displays traffic channel ARFCN, timeslots and coding schemes used, and vital GPRS/EGPRS configuration parameters.

31

3.4 GSM C/I Info Displays C/I information for the most frequently utilized timeslot on each traffic channel in use.

32

3.5 GSM AMR Displays GSM logical channel information, AMR codec selected on uplink and downlink, and statistics on AMR codec utilization.

33

– GPRS WAP browser view

Displays a subset of the GPRS Data view (3.2) during WAP browsing.

35

4.1 GSM Cells Graph displays RxLev for serving cell and three strongest neighbors.

39

4.2 GSM Data Graph displays RLC/MAC data transfer rate.

41

No. View Name Description Page

12

Page 21: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4. Data Views in Text Format

4.1. PDP Context (View No. 1.1)

Screenshot

Key (used for convenience in the manual; not shown in this format in the phone display)

Lines 1–6 show data on the active PDP contexts (up to three) and the contents of the PDP context request.

PDP Address: IPv4 PDP address (12-digit number). See 3GPP 24.008, sec. 10.5.6.4.

NSAPI: Network Service Access Point Identifier. See 3GPP 24.008, sec. 10.5.6.2.

D: Delay Class {0 ... 4}

R: Reliability Class {0 ... 5}

K: Peak Throughput {0 ... 9}

P: Precedence Class {0 ... 3}

MT: Mean Throughput {0 ... 18, 31}

(For the meanings of values, see appendix A.11.)

APN: Access Point Name (shown as scrolling text)

LZT 138 0254 R1A 13

Page 22: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

There are no actions associated with this data view.

Screenshot

Key

Lines 9–10 show information on the network the phone is currently using. This data is repeated in many other data views.

C: Current RAT {G: GSM; –: No service}

ARFCN: Serving cell BCCH ARFCN

B: Serving cell BSIC

RSS: Received signal strength, equal to RxLev; numeric/graphic

RAC: Serving cell Routing Area Code

MCC: Serving cell Mobile Country Code

MNC: Serving cell Mobile Network Code

LAC: Serving cell Location Area Code

CI: Serving cell Cell Identity, 16 bits

14

Page 23: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.2. MM/GMM (View No. 1.2)

There are no actions associated with this data view.

Screenshot

Key

Lines 1–4 show data related to Mobility Management/GPRS Mobility Management.

TMSI: Temporary Mobile Subscriber Identity (hex)

T3212C: T3212, current time between location updates {Off, 0 ... 1530 minutes}. See 3GPP 24.008.

T3212M: T3212, max time between location updates (= start value) {Off, 0 ... 1530 minutes}

PTMSI: Packet TMSI (hex)

GMM: GMM Attached {A: Attached, –: Not attached}

TLLI: Temporary Logical Link Identifier (hex)

The following four parameters are updated each time the phone performs a Location Area Update or Routing Area Update.

RMCC: Registered MCC

RMNC: Registered MNC

RLAC: Registered LAC

RRAC: Registered RAC

Lines 5–6 are the same as the two bottom lines in the PDP Context view: see section 4.1.

LZT 138 0254 R1A 15

Page 24: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

4.3. Time Log (View No. 1.3)

4.3.1. Data View ActionsYou can reset all counters in this view by choosing Reset time log.

Screenshot

This view shows the time (in hours, minutes, and seconds) that the phone has spent in various states since the latest occurrence of one of the following:

• Phone power-on

• Entering replay mode

• Exiting replay mode

• Rewinding of logfile during replay

MMHome: Registered in Home PLMN

Equiv: Registered in Equivalent PLMN

Roam: Registered in Roaming PLMN

Unreg: Unregistered

(See 3GPP 21.905.)

GSMTCH: Time using Traffic Channel (TCH)

PDCH: Time using Packet Data Channel (PDCH)

Idle: Time spent in Idle mode

No Service: Time spent in No Service mode (no RAT found)

16

Page 25: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.4. FTP Data (View No. 1.4)

Screenshot

Key

Line 1

FTP Dir: FTP session type (UL or DL).

Line 2

FTP Address: IPv4 address (12-digit number) or plain-text name of FTP server. Displayed as scrolling text.

Line 3

File Name: Name of file being downloaded/uploaded over FTP. Displayed as scrolling text.

hh:mm:ss: Duration of current FTP session in hours, minutes, and seconds.

Line 4

CThpDL: Current downlink application-level FTP throughput in kbit/s or Mbit/s (based on the latest report from the phone).

CThpUL: Current uplink application-level FTP throughput in kbit/s or Mbit/s (based on the latest report from the phone).

Line 5

MThpDL: Mean downlink application-level FTP throughput in kbit/s or Mbit/s (calculated over the whole of the file currently being transferred).a

MThpUL: Mean uplink application-level FTP throughput in kbit/s or Mbit/s (calculated over the whole of the file currently being transferred).a

a. Note that if the mean throughput calculation is to be correct, the file transferred cannot be arbitrarily large; see section 8.6.1 for details.

LZT 138 0254 R1A 17

Page 26: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Upon completion of each FTP file transfer, an FTP Transfer End event (see section 8.3.5.6) is generated providing a summary of the file transfer and its performance.

There are no actions associated with this data view.

Screenshot

Key

Line 6

TotDataDL: Total bytes transferred on downlink over FTP at the application level (B = bytes, K = kilobytes, M = megabytes). This counter is reset at the end of each file transfer.

TotDataUL: Total bytes transferred on uplink over FTP at the application level (B = bytes, K = kilobytes, M = megabytes). This counter is reset at the end of each file transfer.

Lines 7–8 are the same as the two bottom lines in the PDP Context view: see section 4.1.

18

Page 27: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.5. GPS (View No. 1.5)

There are no actions associated with this data view.

4.6. Map (View No. 1.6)See chapter 6.

Screenshot

Lines 1–8 show GPS data.

Latitude: Latitude in degrees, minutes, and decimal minutes.

Longitude: Longitude in degrees, minutes, and decimal minutes.

Altitude: Height above sea level in meters.

Speed: Speed in km/h.

No. of satellites: The number of satellites seen by the GPS device.

Fix quality: Quality of GPS fix; see appendix A.9.

Time: Time of day, hh:mm:ss (UTC = GMT)

Date: Date, yy-mm-dd

No. of satellites and Fix quality will always be valid as long as TEMS Pocket is connected to a GPS.

Lines 9–10 are the same as the two bottom lines in the PDP Context view: see section 4.1.

LZT 138 0254 R1A 19

Page 28: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

4.7. GSM Cells (View No. 2.1)

Screenshot

Key

Line 1 (GSM serving cell)

L: Logical Channel• B: BCCH• P: PBCCH• p: Hopping PBCCH• S: SDCCH• s: Hopping SDCCH• T: TCH• t: Hopping TCH• D: PDTCH• d: Hopping PDTCH

BC: Serving Cell BCCH ARFCN

BS: Base Station Identity Code (BSIC)

RxLv: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

R: Routing Area Color, RACo {0 ... 7}; invalid (“–”) if GPRS not available in network

If the cell does not broadcast packet channels (no PBCCH), the two rightmost parameters are:

C1: Pathloss Criterion C1

C2: Cell Reselection Criterion C2

If the cell supports packet channels (broadcasts a PBCCH), the two rightmost parameters become:

C31: GPRS Signal Strength Threshold Criterion C31

C32: GPRS Cell Ranking Criterion C32

20

Page 29: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.7.1. Data View Actions

Screenshot

Key

Lines 2–7 (GSM neighbor cells)

NC1 ... NC6: Neighbor Cell BCCH ARFCN of six strongest neighbors

The rest is as on line 1 except for the addition of the following comparison with the serving cell:

A: Location Area/Routing Area properties:• =: Same LA/RA• R: Same LA, different RA• L: Different LA• P: PLMN not matching• –: Unknown

Line 8

MT: MS-TXPWR-MAX-CCH, maximum RACH power (dBm) {GSM 850, 900: 5 ... 39; GSM 1800: 0 ... 36; GSM 1900: 0 ... 33}

RH: Cell Reselection Hysteresis (dB) {0, 2, 3, 6, 8, 10, 12, 14}

B: BS-PA-MFRMS, number of multiframes between paging subgroups {2 ... 9}

CB: Serving cell barred {B: Barred, –: Not Barred}

Lines 9–10 are the same as the two bottom lines in the PDP Context view: see section 4.1.

• You can lock on a cell that is listed in the data view.

LZT 138 0254 R1A 21

Page 30: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

• Choose the cell to lock on by moving the red frame, using the navigation key. When you have navigated to the desired cell, press Select.

• To unlock, enter the Data view actions menu again and give the Unlock GSM command.

22

Page 31: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.8. GSM Cell Id (View No. 2.2)

Screenshot

Key

Line 1 (GSM serving cell)

L: Logical Channel• B: BCCH• P: PBCCH, p: Hopping PBCCH• S: SDCCH, s: Hopping SDCCH• T: TCH, t: Hopping TCH• D: PDTCH, d: Hopping PDTCH

BCCH: Serving Cell BCCH ARFCN

LAC: Serving Cell Location Area Code

CI: Serving Cell Identity

RxLev: Serving Cell RxLev (unit user-configurable: see section 8.10.6), numeric/graphic

Lines 2–7 (GSM neighbors)

NC1 ... NC6: Neighbor Cell BCCH ARFCN of six strongest neighbors

LAC: Neighbor Cell Location Area Code

CI: Neighbor Cell Identity

RxLev: Neighbor Cell RxLev

Line 8

MT: MS-TXPWR-MAX-CCH, maximum RACH power (dBm) {GSM 850, 900: 5 ... 39; GSM 1800: 0 ... 36; GSM 1900: 0 ... 33}

RH: Cell Reselection Hysteresis (dB) {0, 2, 3, 6, 8, 10, 12, 14}

B: BS-PA-MFRMS, number of multiframes between paging subgroups {2 ... 9}

CB: Serving cell barred {B: Barred, –: Not Barred}

Lines 9–10 are the same as the two bottom lines in the PDP Context view: see section 4.1.

LZT 138 0254 R1A 23

Page 32: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

4.8.1. Data View ActionsYou can lock on a GSM cell that is listed in the view. The procedures for locking and unlocking are the same as in the GSM Cells view; see section 4.7.1.

4.9. GSM BA List (View No. 2.3)

4.9.1. Data View ActionsYou can lock on any cell that is listed as a neighbor in this view. The procedures for locking and unlocking are the same as in the GSM Cells view; see section 4.7.1.

Screenshot

Key

Line 1 (serving cell)

L: Logical Channel• B: BCCH• P: PBCCH• p: Hopping PBCCH• S: SDCCH• s: Hopping SDCCH• T: TCH• t: Hopping TCH• D: PDTCH• d: Hopping PDTCH

BCCH: Serving Cell BCCH ARFCN

BSIC: Base Station Identity Code (BSIC)

RxLev: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

Lines 2–9 (neighbor list = BA list)

NC1 ... NC32: BCCH ARFCNs of all neighbors of the serving cell (up to 32 cells).

24

Page 33: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.10. GSM Serving Cell (View No. 3.1)

Screenshotidle mode

Screenshotdedicated mode

Key

Line 1

L: Logical Channel: B for BCCH

BC: BCCH ARFCN

BS: Base Station Identity Code, BSIC

RxLv: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

DSC: Downlink Signaling Counter, current value (idle mode only)

DSM: Downlink Signaling Counter, max value (= start value) (idle mode only)

Line 2

This line shows parameters of the GSM cell configuration. This information remains visible in dedicated mode as long as the same cell is used. When handover to a new cell takes place, no configuration information is read for the new cell while the call is in progress, and this line is then blanked.

CN: CCCH configuration, number of BCCH/CCCH timeslots {NC, Comb, NC2, NC3, NC4}; see appendix A.4, page 97

BP: BS-PA-MFRMS, number of multiframes between paging subgroups {2 ... 9}

BA: BS-AG-BLKS-RES, number of CCCH blocks reserved for AGCH {0 ... 7}

LZT 138 0254 R1A 25

Page 34: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Screenshotidle mode

Screenshotdedicated mode

Key

Line 3 (dedicated mode)

L: Logical Channel• P: PBCCH• p: Hopping PBCCH• S: SDCCH• s: Hopping SDCCH• T: TCH• t: Hopping TCH• D: PDTCH• d: Hopping PDTCH

TC: Traffic Channel (TCH ARFCN) or Stand-alone Dedicated Control Channel (SDCCH ARFCN) or Packet Dedicated Traffic Channel (PDTCH ARFCN). Hopping channels are shown one at a time; see section 3.1.

TS: Timeslot Number

TA: Timing Advance

TX: UE Transmit Power (dBm), numeric/graphic

RLTC/M: Radio Link Timeout (Current) and Radio Link Timeout (Max = Start)

Line 4 (dedicated mode)

C/I: Carrier-to-interference ratio in dB for the traffic channel currently indicated by TC on line 3. That is, for hopping channels the displaying of C/I values is synchronized with the traversal of the hopping list; compare section 3.1. C/I is supported for the modes TCH/F, TCH/H, and PDTCH. Numeric/graphic presentation.

RQ: Receive Bit Error Rate (RxQual; scale defined in 3GPP 05.08), numeric/graphic

FER: Frame Erasure Rate (FER) in percent. Calculated taking DTX into account, i.e. the figure is based only on blocks actually transmitted. Numeric/graphic presentation.

DXU: DTX rate (%) on uplink

DXD: DTX rate (%) on downlink

26

Page 35: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

There are no actions associated with this data view.

Screenshotidle mode

Screenshotdedicated mode

Key

Line 5 (dedicated mode only, except ChTyp)

ChTyp: Channel type, one of {BCCH, PBCCH, PDTCH, SDCCH, TCH/F, TCH/H}; see appendix A.5, page 98

ChM: Channel mode, one of {FR, EFR, HR, AFR, AHR; D24, D48, D96, D144}:• FR = Voice, Full Rate• EFR = Voice, Enhanced Full Rate• HR = Voice, Half Rate • AFR = Voice, AMR Full Rate• AHR = Voice, AMR Half Rate • D24 = Data 2.4 kbit/s, etc. (downlink data rate)

SU: Subchannel Number {0 ... 7}

HS: Hopping Sequence Number {0 ... 63}

MA: MAIO, Mobile Allocation Index Offset {0 ... 63}

CiMd: Ciphering Mode, one of {A5/1, A5/2, GEA/1, GEA/2}

Lines 6–7 are the same as the two bottom lines in the PDP Context view: see section 4.1.

LZT 138 0254 R1A 27

Page 36: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

4.11. GPRS Data (View No. 3.2)

Screenshot

Key

Line 1

L: Logical Channel: B for BCCH

BCCH: Serving Cell BCCH ARFCN

BSIC: Base Station Identity Code (BSIC)

RxLev: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

Line 2

T: Traffic Channel Type:• P: PBCCH, p: Hopping PBCCH• S: SDCCH, s: Hopping SDCCH• T: TCH, t: Hopping TCH• D: PDTCH, d: Hopping PDTCH

TC: Traffic Channel (TCH ARFCN) or Stand-alone Dedicated Control Channel (SDCCH ARFCN) or Packet Dedicated Traffic Channel (PDTCH ARFCN)

Timeslots: Timeslots used on uplink and downlink. The timeslots are represented by the numbers 0–7, and those currently in use are replaced by arrows as follows:

• Upward arrow: Timeslot used on uplink

• Downward arrow: Timeslot used on downlink

• Double-headed arrow: Bidirectional timeslot used on both uplink and downlink

Example: means that TS 1, 2, 3, and 4 are being used on the downlink and TS 3 is being used on the uplink.

Techn: Technology supported in cell: “EDGE” or “GPRS”

28

Page 37: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

Screenshot

Key

Line 3

C/I: Carrier-to-interference ratio in dB for the traffic channel currently indicated by TC on line 2. That is, for hopping channels the displaying of C/I values is synchronized with the traversal of the hopping list; compare section 3.1. Numeric/graphic presentation. Note: C/I for circuit-switched also appears here; there is no differentiation of C/I with respect to data bearer type (CS/PS).

CSd: GPRS: Channel coding scheme on downlink {CS1 ... CS4}; EDGE: Modulation coding scheme on downlink {MCS1 ... MCS9}

MSd: Modulation method on downlink (G = GMSK, 8 = 8-PSK)

CSu: GPRS: Channel coding scheme on uplink {CS1 ... CS4}; EDGE: Modulation coding scheme on uplink {MCS1 ... MCS9}

MSu: Modulation method on uplink (G = GMSK, 8 = 8-PSK)

Line 4

C: EGPRS C Value {0 ... 63}

MBEP: EGPRS mean bit error probability (BEP)

BEPV: EGPRS BEP variance

ARQ: Automatic Repeat Request Mode {ARQ1, ARQ2}: see 3GPP 44.060, sec. 9.2.3.1

LZT 138 0254 R1A 29

Page 38: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

4.11.1. Data View ActionsYou can reset all counters in this view by choosing Reset data counters.

Screenshot

Key

Lines 5–8 report the current performance of and some statistics on the GPRS data transfer.

Line 5, “DL”: LLC protocol level, downlink

Line 6, “DR”: RLC/MAC protocol level, downlink

Line 7, “UL”: LLC protocol level, uplink

Line 8, “UR”: RLC/MAC protocol level, uplink

Rate: Instantaneous data transfer rate in kbit/s or Mbit/s

BLER: Percentage of data blocks erroneously decoded (on downlink), numeric/graphic

Retr: Percentage of data blocks retransmitted (on uplink), numeric/graphic

TotData: Total number of bytes transferred (B = bytes, K = kilobytes, M = megabytes). You can reset these counters as explained in section 4.11.1 below.

Lines 9–10 are the same as the two bottom lines in the PDP Context view: see section 4.1.

30

Page 39: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.12. GPRS Info (View No. 3.3)

There are no actions associated with this data view.

Screenshot

Key

Lines 1–4 are the same as in the GPRS Data view: see section 4.11.

Lines 5–6

EWSd: EGPRS window size on downlink {64 ... 1024}

LWSd: LLC window size (for data) on downlink {1 ... 255}

EWSu: EGPRS window size on uplink {64 ... 1024}

LWSu: LLC window size (for data) on uplink {1 ... 255}

Lines 7–8

G: GMM State {I: Idle, R: Ready, S: Standby, –: No GPRS available}

T3314C: T3314 timer value (GMM Ready Timer), current value; see 3GPP 24.008, sec. 4.7.2

T3314S: T3314 timer value (GMM Ready Timer), start value; see 3GPP 24.008, sec. 4.7.2

T3168: T3168 timer start value (Packet Uplink Assignment Timer), see 3GPP 44.060, sec. 13.1 {value in deciseconds, assigned in System Information}

T3192: T3192 timer start value (Packet Final Block Timer) in ms, assigned in System Information; see 3GPP 44.060, sec. 13.1 {0, 80, 120, 160, 200, 500, 1000, 1500}

NMO: Network Mode of Operation {I, II, III}; see appendix A.8, page 99

DX: DRX Timer Max, see 3GPP 44.060, sec. 5.5.1.5 {0, 1, 2, 4, 8, 16, 32, 64}

Lines 9–10 are the same as the two bottom lines in the PDP Context view: see section 4.1.

LZT 138 0254 R1A 31

Page 40: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

4.13. GSM C/I Info (View No. 3.4)

There are no actions associated with this data view.

Screenshot

Key

This view shows the carrier-to-interference ratio, C/I, for the most frequently utilized timeslot on each GSM traffic channel in use. Up to eight channels can be shown, sorted by worst C/I.

Lines 1–8

ARFCN: TCH or PDTCH ARFCN (channels in hopping list)

C/I: C/I value in dB for this traffic channel, numeric/graphic

Lines 9–10 are the same as the two bottom lines in the PDP Context view: see section 4.1.

32

Page 41: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.14. GSM AMR (View No. 3.5)

Screenshot

Key

Line 1

L: Logical Channel: B for BCCH

BCCH: Serving Cell BCCH ARFCN

BSIC: Base Station Identity Code (BSIC)

RxLev: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

Line 2

T: Traffic Channel type:• P: PBCCH, p: Hopping PBCCH• S: SDCCH, s: Hopping SDCCH• T: TCH, t: Hopping TCH• D: PDTCH, d: Hopping PDTCH

TC: Traffic Channel (TCH ARFCN) or Stand-alone Dedicated Control Channel (SDCCH ARFCN) or Packet Dedicated Traffic Channel (PDTCH ARFCN). Hopping channels are shown one at a time; see section 3.1.

TS: Timeslot Number

TxPwr: UE Transmit Power (dBm), numeric/graphic

Line 3

C/I: Carrier-to-interference ratio in dB for the traffic channel currently indicated by TC on line 2. That is, for hopping channels the displaying of C/I values is synchronized with the traversal of the hopping list; compare section 3.1. C/I is supported for the modes TCH/F, TCH/H, and PDTCH. Numeric/graphic presentation.

LZT 138 0254 R1A 33

Page 42: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

There are no actions associated with this data view.

Screenshot

Key

Line 3 (continued)

RQ: Receive Bit Error Rate (RxQual; scale defined in 3GPP 45.008, sec. 8.2), numeric/graphic

FE: Frame Erasure Rate (FER) in percent, numeric/graphic

DXD: DTX rate (%) on downlink

DXU: DTX rate (%) on uplink

Lines 4–7

In these lines are shown all speech codecs in the AMR active set.

CDL: AMR codec used on downlink

DLU: Utilization (%) of this downlink AMR codec

CUL: AMR codec used on uplink

ULU: Utilization (%) of this uplink AMR codec

Lines 8–9 are the same as the two bottom lines in the PDP Context view: see section 4.1.

34

Page 43: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

4.15. The WAP Browser GPRS Data ViewWhile the WAP browser (activated from the phone’s main menu → Internet) is running, TEMS Pocket can show selected GPRS air interface information in the bottom part of the screen.

The WAP browser data view is by default visible.

• During a WAP session, you can hide the data view by pressing Options and choosing Hide data view. To show it again, press Options and choose Show data view.

• You can also turn this data view on and off from the Pocket menu; see section 8.10.1.

The WAP browser can alternatively be viewed in “landscape” fashion. The data view then still appears at the bottom (that is, along the left edge of the phone display when the phone is held in the normal manner). The data view contents and layout remain unchanged.

There are no actions associated with the WAP browser data view.

Screenshot

Key

Line 1

L: Logical Channel: B for BCCH

BCCH: Serving Cell BCCH ARFCN

BSIC: Base Station Identity Code, BSIC

RxLev: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

MCSd: EGPRS modulation coding scheme on downlink {MCS1 ... MCS9}

Line 2

T: Traffic Channel type:• P: PBCCH, p: Hopping PBCCH• S: SDCCH, s: Hopping SDCCH• T: TCH, t: Hopping TCH• D: PDTCH, d: Hopping PDTCH

TC: Traffic Channel (TCH ARFCN) or Stand-alone Dedicated Control Channel (SDCCH ARFCN) or Packet Dedicated Traffic Channel (PDTCH ARFCN). Hopping channels are shown one at a time; see section 3.1.

LZT 138 0254 R1A 35

Page 44: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Screenshot

Key

Line 2 (continued)

Timeslots: Timeslots used on uplink and downlink. The timeslots are represented by the numbers 0–7, and those currently in use are replaced by arrows as follows:

• Upward arrow: Timeslot used on uplink

• Downward arrow: Timeslot used on downlink

• Double-headed arrow: Bidirectional timeslot used on both uplink and downlink

Example: means that TS 1, 2, 3, and 4 are being used on the downlink and TS 3 is being used on the uplink.

MCSu: EGPRS modulation coding scheme on uplink {MCS1 ... MCS9}

In lines 3–4, all values are combined values computed over all used channels.

Line 3, left: “DL” (downlink, LLC)

Rate: Total LLC downlink instantaneous data transfer rate in kbit/s or Mbit/s

BLER: Percentage of LLC downlink data blocks erroneously decoded

Line 3, right: “UL” (uplink, LLC)

Rate: Total LLC uplink instantaneous data transfer rate in kbit/s or Mbit/s

Retr: Percentage of LLC uplink data blocks retransmitted

36

Page 45: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 4. Data Views in Text Format

Screenshot

Key

In lines 3–4, all values are combined values computed over all used channels.

Line 4, left: “DR” (downlink, RLC/MAC)

Rate: Total RLC/MAC downlink instantaneous data transfer rate in kbit/s or Mbit/s

BLER: Percentage of RLC/MAC downlink data blocks erroneously decoded

Line 4, right: “UR” (uplink, RLC/MAC)

Rate: Total RLC/MAC uplink instantaneous data transfer rate in kbit/s or Mbit/s

Retr: Percentage of RLC/MAC uplink data blocks retransmitted

LZT 138 0254 R1A 37

Page 46: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

5. Data Views with Graphs

The data views in category 4 all contain a graph showing how one or several parameters evolve over time. In other respects, these data views are similar to the text-only data views covered in chapter 4.

The unit “m” on the x-axis of each graph means “minutes”.

Events are indicated as vertical lines in graphs. However, an event appears only if logging is currently turned on for that type of event (see sections 8.3.1.3 and 8.3.2).

Data views with graphs have no actions associated with them.

38

Page 47: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 5. Data Views with Graphs

5.1. GSM Cells (View No. 4.1)

Screenshot

Key

Line 1 (GSM serving cell)

L: Logical Channel• B: BCCH• P: PBCCH, p: Hopping PBCCH• S: SDCCH, s: Hopping SDCCH• T: TCH, t: Hopping TCH• D: PDTCH, d: Hopping PDTCH

BC: Serving Cell BCCH ARFCN

BS: Base Station Identity Code (BSIC)

RxLv: Received Signal Strength (unit user-configurable: see section 8.10.6), numeric/graphic

R: Routing Area Color, RACo {0 ... 7}; invalid (“–”) if GPRS not available in network

If the cell does not broadcast packet channels (no PBCCH), the two rightmost parameters are:

C1: Pathloss Criterion C1

C2: Cell Reselection Criterion C2

If the cell supports packet channels (broadcasts a PBCCH), the two rightmost parameters become:

C31: GPRS Signal Strength Threshold Criterion C31

Line 2 (Strongest GSM neighbor)

NC: Neighbor Cell BCCH ARFCN

The rest is as on line 1 except for the addition of:

A: Location Area/Routing Area properties:• =: Same LA/RA• R: Same LA, different RA• L: Different LA• P: PLMN not matching• –: Unknown

LZT 138 0254 R1A 39

Page 48: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Screenshot

Key

Graph

Blue bars: Received Signal Strength, RxLev (dBm) for GSM serving cell

Lines: Received Signal Strength, RxLev (dBm) for three strongest GSM neighbors

Lines 3–4 are the same as the two bottom lines in the PDP Context view: see section 4.1.

40

Page 49: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 5. Data Views with Graphs

5.2. GSM Data (View No. 4.2)

Screenshot

Key

Line 1

T: Traffic Channel Type:• P: PBCCH, p: Hopping PBCCH• S: SDCCH, s: Hopping SDCCH• T: TCH, t: Hopping TCH• D: PDTCH, d: Hopping PDTCH

TC: Traffic Channel (TCH ARFCN) or Stand-alone Dedicated Control Channel (SDCCH ARFCN) or Packet Dedicated Traffic Channel (PDTCH ARFCN)

Timeslots: Timeslots used on uplink and downlink. The timeslots are represented by the numbers 0–7, and those currently in use are replaced by arrows as follows:

• Upward arrow: Timeslot used on uplink

• Downward arrow: Timeslot used on downlink

• Double-headed arrow: Bidirectional timeslot used on both uplink and downlink

Example: means that TS 1, 2, 3, and 4 are being used on the downlink and TS 3 is being used on the uplink.

Techn: Technology supported in cell: “EDGE” or “GPRS”

Line 2 (RLC/MAC protocol level)

DRate: Instantaneous downlink data transfer rate in kbit/s or Mbit/s

DBLER: Percentage of data blocks erroneously decoded on downlink, numeric/graphic

URate: Instantaneous uplink data transfer rate in kbit/s or Mbit/s

URetr: Percentage of data blocks retransmitted on uplink, numeric/graphic

LZT 138 0254 R1A 41

Page 50: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Screenshot

Key

Graph

Note that unit in the graph is kbit/s, while the prefix in the data rate text fields is either “k” or “M”.

Green line: GSM RLC/MAC downlink data transfer rate in kbit/s

Light green line: GSM RLC/MAC uplink data transfer rate in kbit/s

Lines 3–4 are the same as the two bottom lines in the PDP Context view: see section 4.1.

42

Page 51: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 6. The Map View

6. The Map View

The Map view enables recording of positions for measurements in indoor locations and other places where GPS coverage is not available. The positioning is done by pinpointing the test route in the Map view.

Note that in order to use the pinpointing function, you must have a memory card with sufficient free space installed on the phone. This is because all logfile-related data is copied to the memory card in connection with creating the zip archive. (Other methods of recording a logfile do not require a memory card.)

6.1. Loading a Map Image into the Map View• First you need to obtain an image of the environment that is going to be

covered during measurement. For example, use the phone’s camera to photograph the emergency or evacuation plan for the relevant floor. The best image quality is obtained if the camera is set in black-and-white mode. Also avoid using the flash. If you are using an image from a different source, it must be in JPEG format.

• Load your image as a background image in the Map view: While in this view, press Options and select Data view actions → Load map. Locate the file you want to load, and press Select.

LZT 138 0254 R1A 43

Page 52: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

The image now appears in the Map view:

6.2. Pinpointing Your Test Route

6.2.1. Setting the Map ZoomYou can start pinpointing as soon as the map is loaded. However, before getting started on your test route, it is a good idea to adjust the zoom level of the Map view so that the pinpointing actions can be performed conveniently.

• In the Map view, press Options and select Data view actions → Map properties → Zoom. Set the zoom level as appropriate.

6.2.2. Customizing the Appearance of Route MarkersThe waypoints that you mark on the map will always be colored blue.

The markers tracing your route between waypoints will by default be color-coded according to RxLev. The color coding is explained in appendix B, page 105. You can change to a different parameter as follows:

44

Page 53: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 6. The Map View

• Press Options and select Data view actions → Value element.

6.2.3. Entering Map PropertiesYou can set some text attributes for the map image. The purpose of supplying this information is to enable geographical positioning of the map image using the TEMS Pocket Positioning Tool: see section 6.3.

• Press Options and select Data view actions → Map properties.

The parameters are written to an XML file; see section 6.2.4.

6.2.4. Pinpointing and Recording• To initiate a measurement, press Options and select Data view actions →

Start pinpointing. A crosshair symbol becomes visible, and a logfile is opened automatically. The fact that the pinpointing is in progress is indicated by an icon at the top of the display.

• Select the desired parameter.

(“RLC DL”/“RLC UL” means RLC/MAC throughput. “Rssi”, “RSCP”, and “Ec/N0” are to be ignored.)

• Latitude, Longitude: Enter the coordinates of the top left corner of the map image.

• Address, Building, Floor: Enter the relevant information.

LZT 138 0254 R1A 45

Page 54: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

• To pinpoint a spot on the map, move the crosshairs to the desired position, then press the Select button.

• Continue pinpointing at regular intervals along the route, and whenever you change direction. Consecutive waypoints are automatically connected by route markers.

• When you are done with the measurement, press Options and select Data view actions → Stop pinpointing.

Note: The screen capture function must be turned off, otherwise the right soft button will be labeled Capture instead.

46

Page 55: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 6. The Map View

The logfile closes, and the pinpointing icon disappears.

A zip archive is now created holding:

• the logfile (*.log)

• the image loaded into the Map view (*.jpg)

• a file where the pinpointed route is recorded (*.ppf)

• the map properties covered in section 6.2.3 (*.xml)

• an index file detailing the archive contents (.xml).

Please note that such zip archives cannot be replayed as-is in TEMS Pocket. (They resemble ordinary logfiles in the phone file system, since the phone does not show file extensions.)

6.3. Positioning the Map GeographicallyThe description of the test route furnished by pinpointing can be utilized when viewing TEMS Pocket logfiles in other TEMS tools such as TEMS Investigation and TEMS Presentation.

Before post-processing the data, however, it needs to be anchored to a geographical position. This is accomplished by processing the zip archive with a software utility called TEMS Pocket Positioning Tool, which is installed along with TEMS Investigation as well as TEMS Presentation. It is launched from the Start menu by selecting Programs → Ascom → TEMS Products → Utilities → TEMS Pocket Positioning Tool. For further details on this topic, consult the TEMS Pocket Positioning Tool User’s Manual.

The intended way of working is to position the map using the coordinates provided in the map properties in TEMS Pocket: see section 6.2.3.

After being positioned, the logfiles are ready to be loaded into TEMS Investigation or TEMS Presentation.

LZT 138 0254 R1A 47

Page 56: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

7. TEMS Pocket Functions in the Activity Menu

A number of TEMS Pocket functions are accessed by pressing the Activity key. This is the button labeled .

Note that many of these functions are found only in the Activity menu and not among the submenus of the Pocket menu. They are placed here to be conveniently accessible regardless of what TEMS Pocket functions or other phone functions you are using.

7.1. Operational Mode

7.2. Insert FilemarkThis command inserts filemarks (text strings) in a logfile while it is being recorded. You can use filemarks to tag segments of special interest in the logfile. For example, you might want to note down the location where something particular happened (helpful if you are not using a GPS of any kind).

On selecting this command you are prompted to type the filemark text. It may consist of up to 127 characters.

This command is available only while logfile recording is in progress.

Active: All TEMS Pocket functions are active.

Background: No data views are displayed, but all other TEMS Pocket functions are active.

Inactive: No TEMS Pocket functions are active.

48

Page 57: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 7. TEMS Pocket Functions in the Activity Menu

7.3. Start/Stop Logfile RecordingThis command is used for manual recording of TEMS Pocket logfiles. (Logfile recording can also be automated, using a variety of trigger conditions. This is done from the Logfiles menu; see section 8.7.2. Regarding logfile recording by pinpointing, see section 6.2.)

You can insert filemarks in a logfile during recording; see section 7.2.

If the memory on the storage medium used for logfiles is running low (only 1 MB left), or if some error occurs, the recording is stopped. You are then notified by a message in the display.

Refer to section 8.7 for all remaining details on logfile recording and handling.

During logfile replay this command is not available.

7.3.1. Icons Used for Logfile Recording

While a logfile is being recorded, this icon is shown on the status bar at the top of the display.

7.4. Start/Stop Logfile ReplayThis command is used to start and stop replay TEMS Pocket logfiles in TEMS Pocket itself. Note that you can also replay the logfiles in TEMS Investigation and TEMS Presentation and make use of the powerful presentation facilities in these tools.

On giving this command you are taken to the file system of the logfile storage medium (see section 8.7.1) in order to select a logfile for replay. Regardless of storage medium, the directory is named Other\Pocket\Pro. A filter is applied so that only files with extension .log are visible.

Once you have selected a logfile, the TEMS Pocket user interface (data views, event log, event counters) is cleared, and the logfile replay is put on standby. The actual replay does not begin until you select Play; see section 7.4.1 below.

During replay, the user interface is updated by the logfile content exactly as in live mode, that is, exactly as if the data were being received from the network.

The cell control icon (see section 8.2.1) does not appear during replay, nor can the Cell Control menu be accessed while a logfile is being replayed. It is therefore not possible in TEMS Pocket to inspect the exact cell control

LZT 138 0254 R1A 49

Page 58: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

settings that were in force at a particular point while recording the logfile. This can however be done by replaying the logfile in TEMS Investigation and studying certain information elements exhibited in that application (“Band Control”, “Serving Cell List Active”, and others).

In both TEMS Pocket and TEMS Investigation, events reflecting the application of cell control functions at recording time will appear during replay, just like any other events.

If you rewind the logfile, the TEMS Pocket user interface (data views, event log, event counters) is once again cleared. The same thing happens when you exit replay mode.

During logfile recording, during execution of a command sequence, and during FTP sessions the replay command is not available.

7.4.1. Replay Control Functions

Play: Replays the logfile at approximately live speed. While the replay is in progress the button is relabeled Pause, and pressing the button in that situation pauses the replay. Press the button once more (now named Play again) to resume the replay from the point where it was paused.

Step: Reads one more phone message from the logfile and then pauses the replay. You may have to step several times to see any changes in the data.

Options: Pressing this button gives access to further replay control functions; see below.

Rewind: Rewinds the logfile to the beginning and clears the TEMS Pocket user interface. Press Play to start the replay once more.

Exit replay mode: Aborts the logfile replay, closes the logfile, and returns TEMS Pocket to live mode.

50

Page 59: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 7. TEMS Pocket Functions in the Activity Menu

When the replay has reached the end of the logfile, the buttons are once again relabeled, now with the choices in the Options menu (above):

During logfile replay all other TEMS Pocket control functions (all other commands in the Activity menu and all commands in the Cell Control, FTP, Logfile, and Command Sequence menus) are disabled.

If an incoming call is received during logfile replay, you can choose either to answer the call, aborting the replay, or to ignore the call and proceed with the replay. In the latter case a busy tone will be sent to the calling party.

7.4.2. Icons Used for Logfile ReplayThe following icons are displayed on the status bar to indicate the status of the replay:

Replay in progress at normal speed (following Play command)

Replay paused (following Pause or Step command)

Replay stopped. This means that the logfile has been replayed to the end.

7.5. Event LogThis is a shortcut to the event log; see section 8.3.1.

7.6. Start/Stop FTPThis command is used to conduct FTP sessions, including uploading of TEMS Pocket logfiles if you prefer to do these uploads manually. The

Options: Toggle on-screen help mode; toggle capture on/off.

Rewind: See above.

Exit: Exit replay mode; see above.

LZT 138 0254 R1A 51

Page 60: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

command takes you to a list of the FTP Get and FTP Put operations you have defined. How to perform FTP operations and how to connect to FTP servers is specified in the FTP menu: see section 8.6.

A series of events is generated in connection with each FTP session: see section 8.3.5.6.

During logfile replay and during execution of a command sequence, this command is not available.

7.7. Connect/Disconnect GPSThis command connects or disconnects a GPS (phone-internal or external). For further information on using GPS devices with TEMS Pocket, see section 8.5.

The command is visible only if you have selected manual connect; see section 8.5.1.

While a connect operation is in progress, the menu item reads “Connecting” and is again grayed.

During logfile replay this command is not available.

7.8. Start/Stop Command SequenceThis command starts and stops a command sequence. How to set up command sequences is explained in section 8.8.

When starting the command sequence, you are prompted to select which action it should perform: voice, video, or FTP. The action you select must have been previously defined in order for the command sequence to execute; again, see section 8.8.

During logfile replay this command is not available.

7.9. Pocket MenuThis is a shortcut to the Pocket menu; see chapter 8.

52

Page 61: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8. The Pocket Menu

8.1. GeneralThe Pocket menu can be accessed

• from the Activity menu

• from the phone’s main menu by choosing Settings. The Pocket menu appears at the top of the General tab.

The Pocket menu has the following submenus:

• Cell control menu: Used to control the phone’s behavior in the network (lock on band/frequency/cell etc.). See section 8.2.

• Events menu: Used to show and control the event log, event counters, and event settings. See section 8.3.

• Data views menu: Used to control visibility of data views. See section 8.4.

• GPS menu: Used to configure GPS settings. See section 8.5.

• FTP menu: Used to set up FTP sessions and FTP logfile transfer. See section 8.6.

• Logfile menu: Used to configure automated logfile transfer. See section 8.7.

• Command sequence menu: Used to define a command sequence. See section 8.8.

• Tools menu: Used for various purposes, including import and export of user-defined TEMS Pocket settings. See section 8.9.

• General settings menu: Used to control miscellaneous TEMS Pocket settings. See section 8.10.

LZT 138 0254 R1A 53

Page 62: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.2. Cell Control MenuIn this menu are collected the functions that modify the phone’s behavior in the network.

8.2.1. Icons Used for Cell Control

Whenever at least one cell control function is active, this icon appears on the status bar.

This icon does not appear during logfile replay.

8.2.2. Lock ARFCN GSMThis function locks the phone to an ARFCN in a GSM network. If there exists an available GSM cell using that ARFCN, the phone will be immediately handed over to that cell provided that the signal strength is sufficient. If the signal is too weak, the phone will go into no service mode.

Note that you can also lock on a cell that makes an appearance in data views. See sections 4.7 and 4.8.

• Choose Set ARFCN to lock on a cell. You will be asked to enter an ARFCN number. This ARFCN will then appear beneath the menu item when selected.

• Choose Off to release the lock.

54

Page 63: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.2.3. Lock Band GSMYou can lock the phone to a particular GSM frequency band. Note that this operation will result in no service if you prevent the use of all bands that are available in the area.

The phone cannot be band-locked while a voice or video call is in progress.

8.2.4. Voice Codec GSMThis function is used to modify the list of preferred GSM voice codecs that the phone reports to the network. In the dialog are shown all GSM voice codecs that the phone supports.

You cannot deselect all codecs in the dialog; at least one codec must remain selected at all times.

It should be emphasized that this function does not provide ultimate control of which voice codec is actually used during a call; this decision always remains with the network.

Off: Function not applied.

850, etc.: The phone will be locked to the indicated GSM band.

AMR-WB: Adaptive Multi Rate – Wideband

AMR-FR: Adaptive Multi Rate – Full Rate

EFR: Enhanced Full Rate

FR: Full Rate

AMR-HR: Adaptive Multi Rate – Half Rate

HR: Half Rate

LZT 138 0254 R1A 55

Page 64: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.2.5. Ignore Cell BarredThis function governs whether the phone is allowed to access a barred cell.

8.2.6. Reset Control SettingsThis command undoes any changes made from the default in the Cell control menu. The reset operation does not affect the General settings and Events menus.

• In the Cell control menu, choose Reset control settings and press Yes to confirm.

If you have not changed anything from the default, the Reset control settings choice is disabled and grayed.

The Cell control settings revert to their defaults when the phone is turned off.

8.3. Events MenuEvents are inspected in the event log. (The term “log” as used in this section has got nothing to do with recording of TEMS Pocket logfiles; regarding the latter, see section 7.3.)

Under Event counters, you can check how many times each type of event has occurred.

Under Event settings, you configure settings for events: logging, counting, audio signals, and displaying of icons.

Off: The phone will make no attempt to access barred cells.

On: The phone will ignore barring of cells.

Note: To have events logged at all, you must make sure that Event logging is not set to “Off”. See section 8.3.1.3.

56

Page 65: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.3.1. Event Log

8.3.1.1. Viewing the Event Log• In the Events menu, choose Event Log.

The New tab is shown, listing all events that have occurred since the last time you inspected the New tab. The number of new events is shown in the tab title.

The All tab shows all events, including those not yet viewed (i.e. those remaining on the New tab).

The Fail tab shows all failure events.

The Normal tab shows all normal events.

When an event is selected on a tab, the most important parameters of the event are shown beneath the event name:

To inspect the full details of an event, select it and press View. A plain-text screen appears:

Event time and parameters

Event name

Event-specific parameters

Timestamp

Event name

CGI

LZT 138 0254 R1A 57

Page 66: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.3.1.2. Clearing the Event LogA maximum of 100 events can be stored in the event log. Once the log is full, the oldest log entry is removed whenever a new event is entered. The event log can also be cleared manually:

• To clear the event log, press Options and choose “Clear event log”. Press Yes to confirm.

8.3.1.3. Enabling/Disabling Event Logging and SoundWhile in the event log, you can configure some general aspects of event logging as follows:

• Press the Options button and choose Event logging.

8.3.1.4. Shortcuts to Event Settings and Event Counters• From the event log you can use the Options menu to go directly to the

event settings (see section 8.3.2) or event counters (see section 8.3.3).

8.3.2. Event SettingsEach type of event has a set of configurable settings.

You can export your event settings to file; they are included in the Export settings operation (Tools menu: see section 8.9.4).

8.3.2.1. Viewing Event Settings• From the Events menu, choose Event Settings.

On: Event logging and event sounds are enabled.

Silent: Event logging is enabled, but event sounds are disabled.

Off: Event logging and event sounds are disabled.

The selection made here overrides all settings made for individual event types (see section 8.3.2).

58

Page 67: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

Events are grouped into submenus: one for each event category (CC, MM, SM, GMM, RR, Session). All event types are listed and described in section 8.3.5 below.

Use the navigation key (left/right) to move between event submenus. When you select an event, the current settings for that event are displayed beneath the event name.

8.3.2.2. Modifying Event Settings• To change settings for an individual event, navigate to the event and

press the Select button.

• To apply identical settings to all events in a category (submenu), navigate to that submenu, press Options and choose “Select <category name>” (e.g. “Select RR”).

• To apply identical settings to all events, choose Options and choose “Select all”.

The following options exist:

Log: Turns logging on and off for the event or event category. Turning off logging also turns off Sound and Icon popup (below).

If you select an event category, or all events, a third option appears which is named Default. This restores the default logging settings listed in section 8.3.5.

(continued on next page)

LZT 138 0254 R1A 59

Page 68: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.3.3. Event CountersTEMS Pocket keeps track of the number of times each type of event has occurred. This function is always active and cannot be turned off while the application is in Active mode. The counters are however reset whenever you enter or exit logfile replay mode.

8.3.3.1. Viewing Event Counters• From the Events menu, choose Event Counters.

The events are divided into the same categories as in the event settings (see section 8.3.2). All event types are listed and described in section 8.3.5 below.

Use the navigation key (left/right) to move between event submenus. When you select an event, the current count for that event is displayed beneath the event name.

Sound:

• “Off” means that no sound will be played when the event occurs.

• “Default” means that, in idle mode, the sound predefined for the event will be played when the event occurs. The prerecorded sound files consist of a voice announcing the event. In dedicated mode, the voice recording is replaced by a notification beep.

• “User set” directs you to a directory in the phone’s file system where you can store sound files of your own and associate them with events. Supported file formats are MIDI, MP3, and AMR. (The prerecorded sound files are not accessible in the phone file system.)

Note, however, that if Event logging is set to Silent (see section 8.3.1.3), all event sounds will be muted regardless of the settings made here.

• Icon popup: If turned on, the icon associated with an event will be shown in the status bar each time the event occurs. The icons used are reproduced in section 8.3.5.

60

Page 69: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.3.3.2. Resetting Event Counters• To reset the counter for an event, navigate to the event and press the

Reset button.

• To reset the counters for all events in a category (submenu), navigate to that submenu, press Options and choose “Reset <category name>” (e.g. “Reset RR”).

• To reset the counters for all events, press Options and choose “Reset all”.

8.3.4. Event IconsAn icon is shown on the display status bar for the latest event that occurred. If no event whatsoever occurs within 15 minutes, the icon disappears.

Event icons are differentiated as follows:

• Each event category distinguished under Event settings and Event counters has its own icon (for example, CC and MM; see section 8.3.2).

• All failure events are distinguished by a red cross.

See the examples below:

For other event categories, the appropriate text string is substituted.

Normal event Failure event

LZT 138 0254 R1A 61

Page 70: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.3.5. List of Logged EventsThis section lists all the events saved in the event log and their parameters. Some of the event parameters are described in more detail in appendix A.

Here are also listed the default values for the settings described in section 8.3.2.

The T column indicates whether the event denotes a normal occurrence (N) or some kind of failure (F).

The Def column indicates the default logging, sound, and icon popup settings (On = all settings turned on, L = only logging turned on, Off = all settings turned off).

All events have CGI as parameter; other parameters appear from the tables.

8.3.5.1. CC EventsFor values of CC Cause, see appendix A.3.

8.3.5.2. MM EventsFor values of MM Cause, see appendix A.10.

Event Name T Def Parameters

Call Attempt N Off CC Id, Call Type {MO, MT}

Call Blocked F On CC Id, CC Cause

Call Dropped F On CC Id, CC Cause

Call End N Off CC Id, CC Cause

Call Established N Off CC Id

Event Name T Def Parameters

Auth. Failure(Authentication Failure)

F On MM Cause

Auth. Reject(Authentication Reject)

F On Constant string: “No SIM or IMSI not approved”

62

Page 71: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.3.5.3. SM EventsFor values of SM Cause, see appendix A.15.

LAU Attempt(Location Area Update Attempt)

N Off LA Update Type {Normal, Periodic, IMSI Attach, Combined, Invalid}

LAU Failure(Location Area Update Failure)

F On MM Cause

LAU Reject(Location Area Update Reject)

F On MM Cause

LAU Success(Location Area Update Success)

N Off Previous Location Area, LA Update Type (if = Combined)

MM Reg. Eq.(MM Registered Equivalent PLMN)

N On –

MM Reg. Home(MM Registered Home PLMN)

N On –

MM Reg. Roaming(MM Registered Roaming PLMN)

N On –

MM Unregistered N On –

Event Name T Def Parameters

PDPCtx Act. Att.(PDP Context Activation Attempt)

N Off NSAPI

Event Name T Def Parameters

LZT 138 0254 R1A 63

Page 72: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.3.5.4. GMM EventsFor values of GMM Cause, see appendix A.7.

PDPCtx Act. Cpl.(PDP Context Activation Complete)

N Off NSAPI, IP version {4, 6}, PDP address (IPv4 only)

PDPCtx Act. Rej.(PDP Context Activation Reject)

F On NSAPI, SM Cause

PDPCtx Deact. Att.(PDP Context Deactivation Attempt)

N Off NSAPI

PDPCtx Deact. Cpl.(PDP Context Deactivation Complete)

N Off NSAPI, Type {NW, UE}, SM Cause (if Type = NW)

Event Name T Def Parameters

GMM Attach Att.(GMM Attach Attempt)

N Off Attach type: {GPRS, Combined}

GMM Attach Cpl.(GMM Attach Complete)

N Off Attach type: {GPRS, Combined}

GMM Attach Fail.(GMM Attach Failure)

F On “T3310 expired” or GMM Reject Cause

GMM Detach Att.(GMM Detach Attempt)

N Off GMM Cause

GMM Detach Cpl.(GMM Detach Complete)

N Off GMM Cause, Type {NW, UE}

RAU Attempt(Routing Area Update Attempt)

N Off RA Update Type {Normal, Periodic, Combined}

Event Name T Def Parameters

64

Page 73: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.3.5.5. RR EventsFor values of RR Cause, see appendix A.13.

For values of RR Internal Cause, see appendix A.14.

RAU Complete(Routing Area Update Complete)

N Off Old RA, New RA

RAU Reject(Routing Area Update Reject)

N On Timer Event {True, False}, T3330/GMM Reject Cause

Event Name T Def Parameters

GPRS Pkt. Acs. Fail.(GPRS Packet Access Failure)

F On BCCH ARFCN, BSIC, RR Cause

GPRS Retrans. PRR(GPRS Retransmit Packet Resource Request)

F On BCCH ARFCN, BSIC

GSM Assign. Fail.(GSM Assignment Failure)

F On RR Cause, RR Internal Cause

GSM Datalink Timeout F On Target BCCH ARFCN, BSIC, TO value

GSM HO Failure(GSM Handover Failure)

F On BCCH ARFCN, BSIC, RR Internal Cause

GSM RL Timeout(GSM Radio Link Timeout)

F On BCCH ARFCN, BSIC, Radio Link Timeout Counter (Max)

Event Name T Def Parameters

LZT 138 0254 R1A 65

Page 74: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.3.5.6. Session EventsFor values of Automatic Upload Failure Cause, see appendix A.2.

Imm. Assign. Fail.(Immediate Assignment Failure)

F On BCCH ARFCN, BSIC, RR Internal Cause

Imm. Assign. Rej.(Immediate Assignment Reject)

F On BCCH ARFCN, BSIC, RR Internal Cause

RAT: GSM N On –

RAT: No Service F On –

Event Name T Def Parameters

Auto. Upload End(Automatic Upload End)

N L –

Auto. Upload Fail.(Automatic Upload Failure)

F L Automatic Upload Failure Cause

Auto. Upload Start(Automatic Upload Start)

N L –

FTP Transfer End N On File name, File size, Duration, Bit rate UL, Bit rate DL

FTP Transfer Fail.(FTP Transfer Failure)

F On –

FTP Transfer Start N On –

GPS Conn. Found(GPS Connection Found)

N On –

GPS Conn. Lost(GPS Connection Lost)

F On –

Event Name T Def Parameters

66

Page 75: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.4. Data Views MenuFrom this menu you control what data views should be visible as you browse through them. In the menu, the data views are organized in a multi-tab structure with one tab for each data view category.

The Set all command (at the bottom of each tab) sets the visibility for all data views in the group. Note that this command never has a preset value: the submenu with the choices On and Off has no radio buttons.

GPS Loc. Found(GPS Location Found)

N On –

GPS Loc. Lost(GPS Location Lost)

F On –

Video Call End N Off –

Video Call Fail.(Video Call Failure)

F Off –

Video Call Start N Off –

Voice Call End N Off –

Voice Call Fail.(Voice Call Failure)

F Off –

Voice Call Start N Off –

Toggle: Press this button to toggle the visibility for the selected data view on and off.

Go to: Press this bottom to immediately display the selected data view and exit the Data Views menu.

Event Name T Def Parameters

LZT 138 0254 R1A 67

Page 76: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

If you perform the Go to action for a data view whose visibility is currently set to Off, the view is shown just this once; if you browse to a different view and then back again, the hidden view will be skipped. To make the view permanently visible again you must press Toggle to set its visibility to On.

If you turn off visibility for all data views, one data view will still remain visible as you exit the menu system, namely the one you last accessed. If you do in fact want to hide all data views, you should not edit these settings but rather put TEMS Pocket in background or inactive mode: see section 7.1.

8.5. GPS MenuUsing a GPS device with TEMS Pocket enhances compatibility with products such as TEMS Investigation and TEMS Automatic/TEMS Presentation by allowing TEMS Pocket data to be presented on maps.

The GPS menu is used to control the choice of GPS device and various aspects of how to interact with it.

You can export your GPS settings to file; they are included in the Export settings operation (Tools menu: see section 8.9.4).

Using the Built-in GPSThe Sony Ericsson W995 EDGE has a built-in GPS, and TEMS Pocket can make use of this device for positioning. Access to the built-in GPS is included in the TEMS Pocket standard package.

To be available to TEMS Pocket, the built-in GPS must be enabled in the regular phone user interface. In the phone’s main menu, navigate to Location services → Settings and check that the third item in this submenu reads “Disable GPS”, i.e. the GPS is currently enabled. (It is by default.) If necessary, enable the GPS.

Whenever the built-in GPS is active, this icon from the regular phone interface appears at the top of the display.

By default the phone also has the option Location services → Settings → “Assisted start” activated. This means that the phone will use the Assisted GPS (A-GPS) technology to reduce the time taken to obtain a first GPS fix. The positioning accuracy, on the other hand, does not change.

Since the phone’s use of A-GPS involves contacting a Sony Ericsson specific “assistance server”, the phone must have a functioning data account defined, in the same way as for WAP.

68

Page 77: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

The built-in GPS consumes a large amount of power and thus requires frequent charging of the phone battery. See section 10.2 for some further specifics on this matter.

Using an External GPSTEMS Pocket can also connect to an external (Bluetooth) GPS. This functionality, too, is part of the standard TEMS Pocket package.

You can connect to any Bluetooth GPS device that uses Bluetooth version 1.1 or later, SPP (Serial Port Profile) version 1.1, and NMEA-0183 version 2.2 or later.

Bluetooth pairing is handled from within TEMS Pocket: see section 8.5.2.

The “Assisted start” option (see Using the Built-in GPS above) cannot be combined with an external GPS.

8.5.1. GPS Connect

Off: The phone will not connect to any GPS (whether internal or external), and the Connect GPS item in the Activity menu (section 7.7) is hidden. If a GPS unit is currently connected, choosing this option will disconnect it. If a connect is in progress, it will be aborted.

Manual: The phone can be connected manually to a GPS (internal or external) by using the command in the Activity menu (see section 7.7). If a manual connect fails, an error message is displayed.

Automatic: If GPS device (see section 8.5.2) is set to Internal, or if GPS device is set to Bluetooth and you successfully paired a GPS with the phone when you last did a Bluetooth device search, then the phone will try to connect to the selected GPS automatically as soon as the phone is turned on. If an automatic connect fails, the phone will do a retry once every minute until it succeeds. No error messages are given in this case.

Switching between the options Manual and Automatic disconnects a GPS that is currently connected.

LZT 138 0254 R1A 69

Page 78: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.5.2. GPS Device

Here you select what kind of GPS device TEMS Pocket should use. If you have selected “Automatic” under GPS Connect, however (see section 8.5.1), the GPS device dialog is not accessible.

Internal: TEMS Pocket will use the phone’s internal GPS.

Bluetooth: When you select this, TEMS Pocket will start searching for available Bluetooth devices. The found devices are listed on the screen shown below.

Here are listed all Bluetooth devices that have been found in the search. Note: In the list may appear all kinds of Bluetooth compatible devices, i.e. also devices other than GPS units.

• Among the devices found, select the GPS you want to connect to. The phone will then attempt Bluetooth pairing with the selected device. You will be asked for a passcode.

The Connect GPS command in the Activity menu (see section 7.7) will always apply to the Bluetooth device last paired with the phone as just described.

If you want to refresh the search for Bluetooth devices, you can do so at any time by selecting the Bluetooth option again.

70

Page 79: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.5.3. GPS Time Synch

8.6. FTP MenuIn this menu you specify FTP servers that the phone is going to interact with (whether for FTP testing or for logfile upload). Here you also set up FTP Put/Get operations to perform during testing.

You start and stop FTP testing from the Activity menu: see section 7.6.

You can export your FTP settings to file; they are included in the Export settings operation (Tools menu: see section 8.9.4).

8.6.1. FTP TransferHere you define FTP Put and FTP Get operations. Up to ten operations can be defined. At the outset they are simply numbered from 1 to 10 in the user interface; you get the opportunity to name the operations while defining them (see below).

If this is set to On, the phone clock will be synchronized with the GPS time. This is useful for instance if you are going to upload TEMS Pocket logfiles to a TEMS Automatic database.

Note: For this synchronization to work, it is vital that the time zone has been correctly set in the phone.

• Select a number to define the corresponding FTP operation.

LZT 138 0254 R1A 71

Page 80: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Note that the file used for upload or download must not be larger than about 500 MB, or the FTP Data view (see section 4.4) will not show correct values for the mean data transfer rate.

Once you are done setting up an FTP operation, its name and direction, the server to interact with, and the file to put/get will appear in the FTP transfer list:

FTP Put parameters

FTP Get parameters

Name: Text field for labeling the FTP operation.

Direction: Select FTP Put or FTP Get. The remaining parameters are partly different for the two types of operation:

FTP Put Specific ParametersLocal file: Browse to select the file to be uploaded.

Remote directory: Name of directory where the file should be stored on the FTP server.

FTP Get Specific ParametersRemote file: Path describing the location of the file to get on the FTP server. A leading slash may be used as root symbol but is not mandatory.

Save file to: The downloaded file can be written either to the phone memory or to the memory stick. In either case, files are stored in the directory Other.

If the phone runs out of memory during an FTP Get operation, the operation will complete, but no file will be stored in the phone file system.

Common ParametersFTP server: Specify the FTP server to interact with: one of those defined in the FTP server submenu (see section 8.6.2).

72

Page 81: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.6.2. FTP ServerHere you specify FTP servers and how to access them. Up to ten FTP servers can be defined. At the outset they are simply numbered from 1 to 10 in the user interface; you get the opportunity to name the servers while defining them (see below).

• Select a number to define the corresponding FTP server.

Name: Text field for labeling the FTP server.

Remote address: The IP address of the FTP server. This can be either an alphanumeric string, without ftp:// at the beginning (for example, ftp.myftpserver.com), or a 12-digit number. The address may not contain a path to a subdirectory.

Port: The FTP server port. The default is 21.

FTP user: User name on the FTP server.

FTP password: User password on the FTP server.

(continued on next page)

LZT 138 0254 R1A 73

Page 82: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Fixed timeouts (not user-configurable) are used when establishing the dialup connection (60 s) and when setting up the FTP session itself (60 s). Failure to obtain a response from the FTP server within the latter time period results in “FTP session error”.

8.7. Logfile MenuTEMS Pocket can record its measurements in logfiles, containing the same richness of detail as logfiles recorded with TEMS Automatic test units or with terminals connected to TEMS Investigation. Logfiles are ordinary files in the phone file system and can be handled from the File manager.

Logfiles are stored either in the internal phone memory or on a memory stick (see section 8.7.1 below). Sony Ericsson phones support Memory Stick M2.

You can record logfiles manually in the following ways:

• By using commands in the Activity menu (see section 7.3).

• In connection with pinpointing in the Map view (see chapter 6).

You can also configure TEMS Pocket to trigger automatic recording of logfiles in a number of situations: see section 8.7.2.

TEMS Pocket has a logfile replay function, described in section 7.4. You can also transfer the logfiles to a PC and replay them in TEMS Investigation (version 10.0.3 or later) or import them into the database of a TEMS Automatic system (version 8.0 or later). The file transfer can be done through a USB cable or via Bluetooth. It is also possible to upload logfiles to an FTP server using the built-in FTP client (see sections 8.7.3 and 8.7.6), or to send logfiles as attachments to e-mail.

To reduce FTP transfer times, you can opt to compress logfiles prior to upload. This is dealt with in section 8.7.4.

Remote directory: This parameter applies to logfile upload only; it names the directory where the logfiles should be stored on the FTP server. When you perform a manual FTP Put operation, this parameter is overridden by the identically named parameter in the FTP Put command (see section 8.6.1).

Data account: Select the data account that should be used for the FTP session.

74

Page 83: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

You can export all logfile-related settings to file; they are included in the Export settings operation (Tools menu: see section 8.9.4).

8.7.1. Save Logfile To

8.7.2. Autostart LogfileYou can configure logfile recording to start automatically in certain situations.

Below it is indicated when the automatic recording terminates if you do not stop the recording manually from the Activity menu (which is always possible; see section 7.3).

• Press Mark to check an option.

• Press Unmark to uncheck an option that is currently checked.

• Press Save to confirm your selections.

Phone memory: Logfiles are saved to the phone memory, directory Other\Pocket\Pro.

Memory stick: Logfiles are saved to the memory stick, directory Other\Pocket\Pro, provided that the phone has got a memory stick installed.

Startup: Logfile recording starts automatically when the phone is powered on and continues until it is powered off.

Voice: Logfile recording starts automatically at the start of a voice call and stops at the end of that call.

Video: Logfile recording starts automatically at the start of a video call and stops at the end of that call.

FTP: Logfile recording starts automatically at the beginning of an FTP testing session (initiated by the Start FTP command in the Activity menu: see section 7.6) and stops at the end of that session. (Recording is not triggered by uploading logfiles via FTP.)

LZT 138 0254 R1A 75

Page 84: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.7.2.1. Notes on Message Buffering: Pre-guard PeriodIf at least one of the options Voice, Video, and FTP is checked in the Autostart logfile dialog, then the phone will continuously maintain a buffer holding the most recent signaling (up to 10 seconds’ worth of it). This is to ensure that when logfile recording is triggered, the file will capture as much as possible of the signaling leading up to the establishment of the call or data session. The arrangement thus serves the same purpose as the pre-guard period set in TEMS Automatic work order actions. In TEMS Pocket the length of the pre-guard cannot be customized; the exact period of time spanned by the message buffering depends on the amount of signaling that has occurred.

The buffering makes the logfile more complete not only for mobile-terminated (MT) but also for mobile-originated (MO) calls and data sessions. This is because in the MO case, the recording does not begin instantly as the user initiates the service from the phone keypad, but only after a certain delay (the exact details being service-specific).

Selecting the Startup option does not trigger buffering of messages.

Message buffering is furthermore associated with automatic logfile recording only. The buffer will be kept up-to-date whenever autostart options are selected as described above, but if you record a logfile manually (see section 7.3), the buffer contents are not logged.

8.7.2.2. Post-guard PeriodWhen the trigger condition for stopping an automatic logfile recording is satisfied, a post-guard time of 10 seconds is added before the recording is stopped and the logfile closed. The purpose of the post-guard period is to capture signaling taking place in connection with termination of the service.

Exception: The above does not apply to the Startup option and power-off.

76

Page 85: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.7.3. Upload Logfile

Logfiles cannot be uploaded while a command sequence is executing or during logfile replay. If a logfile upload comes due (according to the upload schedule defined) while one of these tasks is in progress, that upload is simply canceled. Uploads are resumed (again following the upload schedule) after the command sequence or replay has been ended.

A set of events is provided reporting on the progress and outcome of each automatic upload. See section 8.3.5.6.

Here you configure uploading of logfiles via FTP to an FTP server. What server to upload to is selected in the FTP server submenu: see section 8.7.6.

Immediate: Each logfile is uploaded as soon as it has been recorded.

Schedule: Logfiles are uploaded according to a schedule that you define here. Select this option to enter the Start time screen, then turn to section 8.7.3.1.

Each time an upload is performed, all logfiles are sent that have not yet been uploaded (logfiles created since the last upload, plus any older logfiles that may remain because you aborted uploading of these files).

Off: No uploading. Logfiles are simply stored in the phone memory or on the memory stick as long as free space is available. Use this setting if you prefer to upload logfiles manually using the FTP Put command (see section 7.6).a

a. There is yet another way to upload logfiles manually, using a command accessed from the phone file system. See chapter 9.

LZT 138 0254 R1A 77

Page 86: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.7.3.1. Setting an Upload Schedule

Step 1

Step 2

Step 3

Now: Choose this option to perform the first upload right away (as soon as you are done setting up the schedule). Skip to Step 3 below.

00:00: Choose this option to specify a time of day when the first upload should be performed.

If you chose “00:00” in Step 1, set the upload time here.

Set the interval between uploads. None means that only a single upload will be performed.

Press Select to complete the schedule setup. If you chose Now in Step 1, the upload will start immediately; otherwise it will start at the scheduled time.

You can abort an upload in progress by using the Stop FTP Put command in the Activity menu (see section 7.6). If you abort an upload, the files that were not transferred will be included in the next upload.

78

Page 87: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.7.4. Compress

It should be pointed out that compression of large logfiles takes considerable time and that all logfiles to be uploaded in the same batch are compressed before any uploading begins. (It is possible to abort an upload at any time.)

If the FTP transfer fails, for example because the FTP transfer setup in TEMS Pocket is faulty, then the logfiles will remain compressed and included in the first subsequent upload that succeeds.

If set to On, logfiles will be compressed using a Huffman coding algorithm before they are uploaded.a

If compression is turned on, it will take place regardless of the upload procedure chosen (automatic or manual: see section 8.7.3). However:

• After an automatic upload, the original uncompressed logfile (as well as the compressed version) will be deleted from the phone file system.

• After a manual upload initiated by a Start FTP command (section 7.6), the original logfile will remain on the phone.

a. Compressed logfiles receive the extension .LZZ; this is a TEMS-specific extension recognized by the automated logfile handling in TEMS Presentation. If you wish to unpack uploaded logfiles manually on the FTP server, for example using gzip, replace “.LZZ” by “.log.gz” in each file. (Replaying TEMS Pocket logfiles in TEMS Investigation currently requires the logfiles to be unpacked.)

LZT 138 0254 R1A 79

Page 88: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.7.5. FTP Resume

8.7.6. FTP Server

8.8. Command Sequence MenuTEMS Pocket supports automation of voice calls, video calls, and FTP data sessions using the command sequence. The command sequence can only run one service at a time; it is not possible to mix, for example, voice and FTP in the sequence.

You start and stop the command sequence from the Activity menu: see section 7.8.

While the command sequence is executing it will repeat the action defined for it over and over again.

If set to On, then if a logfile upload is interrupted because the FTP connection goes down, the upload will be resumed from the point where it was interrupted.

If set to Off, an interrupted logfile upload will be restarted from the beginning.

For the function to work, the FTP server must support resume functionality.

Here you select a FTP server to upload logfiles to. The servers listed are those that you define in the FTP menu (see section 8.6.2). Note that the Remote directory parameter must have a valid value for any server that is going to be used for logfile uploads.

80

Page 89: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

You can export your command sequence setups to file; they are included in the Export settings operation (Tools menu: see section 8.9.4).

8.8.1. Voice Settings

8.8.2. Video Settings

Note: Running a command sequence for extended periods of time places a high load on the phone battery. See section 10.3 for advice on how to ensure that the battery is not drained.

Dial number: Enter the number to call. Valid characters are: +, #, *, 0, ..., 9, and p (for pause).

Call duration: Specify the duration in seconds of each voice call.

Guard time: Specify the duration in seconds of the idle interval between voice calls.

Dial number: Enter the number to call. Valid characters are: +, #, *, 0, ..., 9, and p (for pause).

Call duration: Specify the duration in seconds of each video call.

Guard time: Specify the duration in seconds of the idle interval between video calls.

LZT 138 0254 R1A 81

Page 90: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.8.3. FTP Settings

8.9. Tools MenuIn this menu are collected miscellaneous functions and information.

8.9.1. About Screen

FTP transfer: Select the FTP transfer to perform: one of those you have defined in the FTP menu (see section 8.6.1).

Guard time: Specify the duration in seconds of the idle interval between FTP transfers.

Line 1: Name of TEMS Pocket product package.

Line 2: TEMS Pocket version.

Lines 3–4

IMSI: International Mobile Subscriber Identity of the SIM card used. It is made up of

• Country Code (3 digits)

• Network Code (2 digits)

• Identification Number (at most 10 digits)

IMEI: International Mobile Equipment Identity of the phone. It is made up of

• Type Approval Code (6 digits)

• Final Assembly Code (2 digits)

• Serial Number (6 + 1 digits)

82

Page 91: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.9.2. Quick Guide

8.9.3. Import SettingsTEMS Pocket settings previously exported to files (see section 8.9.4) can be imported into TEMS Pocket using this function. Note that the import will erase all settings currently defined in the application. A message will appear warning you about this.

• From the Tools menu, select Import settings. Then select the storage medium where the settings files reside, and locate the files.

• Leave checked all categories of settings that you want to import. Uncheck the rest, using the Unmark option. Then press Import.

This is a collection of tutorials in WAP page format explaining various aspects of how TEMS Pocket works. Audio recordings featuring an instructor’s voice are included.

LZT 138 0254 R1A 83

Page 92: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

• A warning message appears; press Yes to continue. The import is then performed, overwriting all TEMS Pocket settings currently in force. The outcome of each file import operation is reported as shown below.

After importing FTP settings, you should verify that all data accounts referred to in the FTP server configurations are in fact defined in the phone. An FTP server configuration referencing a data account that is lacking in the phone is of course useless for that phone.

8.9.4. Export SettingsYou can export to file all user-configured settings for command sequences, events, FTP and logfiles, as well as everything in the General settings menu. A separate file is created for each of the categories just mentioned. The settings files are stored in the directory Other\Pocket\Settings (regardless of the choice of storage medium; see below).

• From the Tools menu, select Export settings.

84

Page 93: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

• You are prompted to create a folder for the export files (or, if applicable, select an existing folder):

After you select one of the options, the export is performed automatically.

8.10. General Settings MenuIn this menu you specify various aspects of TEMS Pocket behavior and of the data presentation:

• Visibility of WAP data views

• Data view style

• Displaying of messages

• Backlight

• Cell Id format: decimal or hexadecimal

• Power unit: GSM units or dBm (RxLev)

• Full/Sub values (RxLev, RxQual)

• Auto answer

Phone memory: The settings files are saved to the phone memory.

Memory stick: The settings files are saved to the memory stick, provided that the phone has got one installed.

LZT 138 0254 R1A 85

Page 94: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

The settings made here remain in force until you modify them again or reset them with the Reset All command (see section 8.10.9).

You can export the General settings to file; they are included in the Export settings operation (Tools menu: see section 8.9.4).

8.10.1. WAP Data ViewWhen you are running WAP services you can have a TEMS Pocket data view displayed at the bottom of the WAP browser. See section 4.15, page 35.

For information on how to prepare the phone for WAP and getting started using the service, please consult the user manual for the phone.

8.10.2. Data View Style

Choosing On activates the WAP data views.

Default: The data views with text in black are displayed against a white background.

Themed: The data views are displayed against the background specified by the theme set in the phone (main menu → Settings → Display tab → Theme).

86

Page 95: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.10.3. Messages

8.10.4. Backlight

8.10.5. Cell Id Format

Normal: All phone messages are displayed as usual.

Minimized: Some phone messages are modified or removed in order not to disturb the inspection of TEMS Pocket data views. Specifically:

• The “call in progress” message box, normally displayed throughout calls, is removed.

• The “calling” and “incoming call” message boxes are shown, but the message box size is shrunk to a minimum.

• All other messages are displayed as usual.

Normal: The display backlight is dimmed after about 15 seconds and turned off after about 25 seconds of user inactivity.

1 minute, etc.: The display backlight is dimmed after about 15 seconds as usual but remains in that state for the duration selected, without being turned off, even if there is no user input.

Hex: LAC and CI are displayed in hexadecimal digits.

Decimal: LAC and CI are displayed in decimal digits.

LZT 138 0254 R1A 87

Page 96: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

8.10.6. Power Display

8.10.7. Measure Mode Display

8.10.8. Auto Answer

dBm: RxLev is displayed in dBm.

GSM: RxLev is displayed in GSM units. (Not applicable to graphs.)

Sub: RxLev and RxQual are presented in the form of Sub values.

Full: RxLev and RxQual are presented in the form of Full values.

If On is chosen, the phone will automatically answer an incoming call (after a period of time equivalent to two standard ring signals).

88

Page 97: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 8. The Pocket Menu

8.10.9. Reset AllThis command restores all settings in the General settings menu to their defaults. See appendix C, page 108 for a listing of the default settings.

LZT 138 0254 R1A 89

Page 98: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

9. Uploading TEMS Pocket Logfiles from the Phone File System

Besides the TEMS Pocket internal logfile upload functions, covered in sections 7.6 and 8.7.3, a further FTP upload command is available. This command is separate from the TEMS Pocket user interface but is nonetheless a feature specific to TEMS Pocket phones.

• In the phone’s main menu, navigate to Organiser → File manager → Other → Pocket → Pro and select the logfile(s) you want to upload.

– To select a single logfile, just navigate to that file. Then press Send.

– To select multiple logfiles, choose Options → Mark → “Mark several”, then check the files that are to be uploaded. Alternatively, choose “Mark all” to check all files in the directory. Then choose Options → Send.

90

Page 99: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 9. Uploading TEMS Pocket Logfiles from the Phone File System

• In either case, a menu of send options now appears. From that menu, select “Via FTP”. (This option is not found in commercial phones. It can only be used to transfer TEMS Pocket logfiles; if a file other than a TEMS Pocket logfile has been selected, the Via FTP option does not appear.).

• You are now taken to the list of FTP servers you have defined in TEMS Pocket; see section 8.6.2. Select the FTP server you want to upload to.

• The upload starts.

After a logfile has been uploaded by this method, it is deleted from the phone file system.

LZT 138 0254 R1A 91

Page 100: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

10. Battery Charging Considerations

Running several tasks in parallel on the Sony Ericsson W995 EDGE places a heavy load on the phone battery. It may in fact happen that the battery charger cannot keep up with the power consumption, so that the battery will eventually be drained even if the charger is connected all the time. This situation may arise for example if the phone is more or less constantly using one service or another while at the same time having its display fully lit.

Some specific advice on battery charging related matters is given below.

10.1. Choice of Phone ChargerWhen engaging the phone in highly power-consuming tasks, you should always use the regular phone charger. The USB charger which is also provided with the phone is only about one third as powerful, which will often be vastly insufficient when running TEMS Pocket.

10.2. Using the Phone’s Built-in GPSYou need to be aware that using the phone’s internal GPS with TEMS Pocket very considerably increases the power consumption and hence the risk that the battery charger cannot keep up.

10.3. Using a TEMS Pocket Command SequenceIf you are using the command sequence function in TEMS Pocket, you must take special steps to ensure that the phone battery is not drained.

To understand why it is first necessary to explain how the battery charging in the Sony Ericsson W995 EDGE works.

First we need to define the end-of-charge (EoC) state for the battery. This is a state where the battery is regarded as fully charged by the phone’s charging algorithm. The precise details need not bother us; however, and crucially, the

92

Page 101: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Chapter 10. Battery Charging Considerations

method of testing whether the EoC state has been reached is to measure the average current flowing to/from the battery over a period of time.

Now, if TEMS Pocket is continuously executing a command sequence (say, making voice calls), the phone will be switching frequently between idle and dedicated mode. This in turn means that the current to the battery will not be constant enough for the EoC state ever to be reached. Even if the battery charge level remains high at all times (for example, above 90%), the charging algorithm will never consider the battery to be fully charged.

Since prolonged charging of the battery increases the risk of battery failure, the charging algorithm has a safety timer that disables the charger after four hours if the battery has failed to reach the EoC state within this time. If this happens, the phone will run on batteries until the charger is disconnected and reconnected, or until the phone is power cycled. If neither of these actions is performed, and a command sequence is running, the battery will be drained in a fairly short time.

For example, suppose that the following command sequence is executed:

• Voice call (see section 8.8.1)

• Call duration = 15 s

• Guard time = 60 s

The phone performs charging in idle mode only, unless the battery charge is low. In the above case, the phone is idle about 50% of the time, so after about 4 × 2 = 8 hours the safety timer expires and the charger is disabled. After that the phone runs on battery power only, and tests using a battery in near mint condition have shown that the battery is then drained in about 4 hours.

To prevent this situation from arising, you have two options:

• One way is to disable the command sequence for a while (before the safety timer expires) to give the phone an unbroken stretch of time in idle mode and allow the battery to reach the EoC state. Note, however, that the length of the break required depends on the settings in the command sequence and on the general condition of the battery. In the above test case, an idle mode period of 15–20 minutes was required, but in other circumstances more time may be needed. (You must halt the command sequence manually, as described in section 7.8.)

• Another approach is simply to make sure you disconnect the battery charger physically from the phone (or unplug the charger from its power source) before the battery is drained, and then reconnect the charger.

The latter option is the only completely safe one, and it is therefore recommended.

LZT 138 0254 R1A 93

Page 102: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

11. Support Contact Information

For support in using TEMS Pocket, please contact Ascom according to the directions found at www.ascom.com/networktesting under the link “TEMS Sales & Support”.

To sign up for the TEMS on-line subscription service, please go to the same web site and click the link “TEMS Subscription Service”. This free service includes e-mail notification of TEMS product launches, version upgrades and patches, as well as on-line TEMS News.

94

Page 103: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix A. Parameter Values

Appendix A. Parameter Values

This appendix lists the possible values of some parameters appearing in the views and of some event parameters.

A.1. Activate PDP Context Failure Cause

A.2. Automatic Upload Failure Cause

26 Insufficient resources27 Missing or unknown APN28 Unknown PDP address or PDP type29 User authentication failed30 Activation rejected, unspecified31 Activation rejected by GGSN32 Service option not supported33 Requested service option not subscribed34 Service option temporarily out of order35 NSAPI already used95 Semantically incorrect message96 Invalid mandatory information97 Message type non-existent or not implemented98 Message type not compatible with the protocol state99 Information element non-existent or not implemented111 Protocol error, unspecifiedT3380 Fifth expiry of T3380 timer (MS side)

1 Compression failed, probably due to full file system2 User canceled upload3 Destination folder is incorrect5 No FTP account specified for automatic upload6 No FTP server specified for automatic upload7 FTP rename failed

LZT 138 0254 R1A 95

Page 104: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

A.3. CC Cause

8 FTP Put failed9 FTP Get failed11 FTP login failed, incorrect user name or password12 Data account assigned to the upload is invalid13 Connection failed, FTP server not responding14 No files to upload

1 Unassigned (unallocated) number3 No route to destination6 Channel unacceptable8 Operator determined barring16 Normal call clearing17 User busy18 No user responding19 User alerting, no answer21 Call rejected22 Number changed25 Pre-emption26 Non selected user clearing27 Destination out of order28 Invalid number format (incomplete number)29 Facility rejected30 Response to STATUS ENQUIRY31 Normal, unspecified (not logged)34 No circuit/channel available38 Network out of order41 Temporary failure42 Switching equipment congestion43 Access information discarded44 Requested circuit/channel not available47 Resources unavailable, unspecified49 Quality of service unavailable50 Requested facility not subscribed55 Incoming calls barred within the CUG57 Bearer capability not authorized58 Bearer capability not presently available

96

Page 105: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix A. Parameter Values

A.4. CCCH Configuration

63 Service or option not available, unspecified65 Bearer service not implemented68 ACM equal to or greater than ACMmax69 Requested facility not implemented70 Only restricted digital information bearer capability is available79 Service or option not implemented, unspecified81 Invalid transaction identifier value87 User not member of CUG88 Incompatible destination91 Invalid transit network selection95 Semantically incorrect message96 Invalid mandatory information97 Message type non-existent or not implemented98 Message type not compatible with protocol state99 Information element non-existent or not implemented100 Conditional IE error101 Message not compatible with protocol state102 Recovery on timer expiry111 Protocol error, unspecified127 Interworking, unspecified

NC 1 basic physical channel used for CCCH, not combined with SDCCHs

Comb 1 basic physical channel used for CCCH, combined with SDCCHs

NC2 2 basic physical channels used for CCCH, not combined with SDCCHs

NC3 3 basic physical channels used for CCCH, not combined with SDCCHs

NC4 4 basic physical channels used for CCCH, not combined with SDCCHs

LZT 138 0254 R1A 97

Page 106: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

A.5. Channel Type

A.6. Deactivate PDP Context Cause

A.7. GMM Cause

BCCH Broadcast Control Channel, SignallingPBCCH Packet Broadcast Control ChannelPDTCH Packet Dedicated Traffic ChannelSDCCH Stand-alone Dedicated Control ChannelTCH/F Traffic Channel, Full RateTCH/H Traffic Channel, Half Rate

25 LLC or SNDCP failure26 Insufficient resources36 Regular PDP context deactivation37 QoS not accepted38 Network failure39 Reactivation requestedT3390 Fifth expiry of T3390 timer (MS side)

2 IMSI unknown in HLR3 Illegal MS6 Illegal ME7 GPRS services not allowed8 GPRS services and non-GPRS services not allowed9 MS identity cannot be derived by the network10 Implicitly detached11 PLMN not allowed12 Location area not allowed13 Roaming not allowed in this location area14 GPRS services not allowed in this PLMN15 No suitable cells in location area16 MSC temporarily not reachable17 Network failure20 MAC failure21 Synch failure

98

Page 107: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix A. Parameter Values

A.8. GPRS Network Mode of OperationHandling of paging in the GPRS network.

A.9. GPS Fix Quality

22 Congestion23 GSM authentication unacceptable40 No PDP context activated48–63 Retry upon entry into a new cell95 Semantically incorrect message96 Invalid mandatory information97 Message type non-existent or not implemented98 Message type not compatible with the protocol state99 Information element non-existent or not implemented100 Conditional IE error101 Message not compatible with the protocol state111 Protocol error, unspecified

I Mode I: All paging on GPRS channels; Gs signalling interface present

II Mode II: All paging on PCH; no GsIII Mode III: All circuit-switched paging on PCH, all packet-

switched paging on PPCH; no Gs

0 Fix not available or invalid1 GPS SPS Mode, fix valid2 Differential GPS, SPS Mode, fix valid3 GPS PPS Mode, fix valid4 Real Time Kinematic. System used in RTK mode with fixed

integers5 Float RTK. Satellite system used in RTK Mode, floating integers6 Estimated (Dead Reckoning) mode7 Manual Input Mode8 Simulator Mode32 Internal GPS

LZT 138 0254 R1A 99

Page 108: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

A.10. MM Cause

A.11. PDP Context Request Parameters

A.11.1. Delay Class

2 IMSI unknown in HLR3 Illegal MS4 IMSI unknown in VLR5 IMEI not accepted6 Illegal ME11 PLMN not allowed12 Location area not allowed13 Roaming not allowed in this location area17 Network failure22 Congestion32 Service option not supported33 Requested service option not subscribed35 Service option temporarily out of order38 Call cannot be identified48–63 Retry upon entry into a new cell95 Semantically incorrect message96 Invalid mandatory information97 Message type non-existent or not implemented98 Message type not compatible with the protocol state99 Information element non-existent or not implemented100 Conditional IE error101 Message not compatible with the protocol state111 Protocol error, unspecified

0 Subscribed1 Delay class 12 Delay class 23 Delay class 34 Delay class 4 (best effort)

100

Page 109: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix A. Parameter Values

A.11.2. Reliability Class

A.11.3. Peak Throughput

A.11.4. Precedence Class

A.11.5. Mean Throughput

0 Subscribed1 Acknowledged GTP, LLC, and RLC; Protected data2 Unacknowledged GTP; Acknowledged LLC and RLC,

Protected data3 Unacknowledged GTP and LLC; Acknowledged RLC,

Protected data4 Unacknowledged GTP, LLC, and RLC, Protected data5 Unacknowledged GTP, LLC, and RLC, Unprotected data

0 Subscribed1 Up to 1000 octets/s2 Up to 2000 octets/s3 Up to 4000 octets/s4 Up to 8000 octets/s5 Up to 16,000 octets/s6 Up to 32,000 octets/s7 Up to 64,000 octets/s8 Up to 128,000 octets/s9 Up to 256,000 octets/s

0 Subscribed1 High priority2 Normal priority3 Low priority

0 Subscribed1 100 octets/h2 200 octets/h3 500 octets/h4 1000 octets/h

LZT 138 0254 R1A 101

Page 110: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

A.12. Routing Area Update Failure Cause

A.13. RR Cause

5 2000 octets/h6 5000 octets/h7 10,000 octets/h8 20,000 octets/h9 50,000 octets/h10 100,000 octets/h11 200,000 octets/h12 500,000 octets/h13 1,000,000 octets/h14 2,000,000 octets/h15 5,000,000 octets/h16 10,000,000 octets/h17 20,000,000 octets/h18 50,000,000 octets/h31 Best effort

3 Illegal MS6 Illegal ME7 GPRS services not allowed9 MS identity cannot be derived by the network10 Implicitly detached11 PLMN not allowed12 Location area not allowed13 Roaming not allowed in this location area96 Invalid mandatory information99 IE non-existent or not implemented100 Conditional IE error111 Protocol error, unspecifiedT3330 Fifth expiry of T3330 timer (MS side)

0 Normal event1 Abnormal release, unspecified2 Abnormal release, channel unacceptable3 Abnormal release, timer expired

102

Page 111: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix A. Parameter Values

A.14. RR Internal Cause

A.15. SM Cause

4 Abnormal release, no activity on the radio path5 Preemptive release8 Handover impossible, timing advance out of range9 Channel mode unacceptable10 Frequency not implemented65 Call already cleared95 Semantically incorrect message96 Invalid mandatory information97 Message type non-existent or not implemented98 Message type not compatible with protocol state100 Conditional IE error101 No cell allocation available111 Protocol error, unspecified

0 Normal release1 Abnormal release unspecified2 MAX no of random access3 Access barred4 Reject from base station5 No cell available6 No ciphering key7 Reestablish not allowed8 Data link error9 Establish error10 Ciphering algorithm not implemented11 PS connection aborted due to CS connection12 PDCH release13 SCH timing error or timing advance out of range14 L2 error15 Message received in invalid state16 IRAT U2G handover failure

8 Operator Determined Barring24 MBMS bearer capabilities insufficient for the service

LZT 138 0254 R1A 103

Page 112: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

25 LLC or SNDCP failure (A/Gb mode only)26 Insufficient resources27 Missing or unknown APN28 Unknown PDP address or PDP type29 User authentication failed30 Activation rejected by GGSN31 Activation rejected, unspecified32 Service option not supported33 Requested service option not subscribed34 Service option temporarily out of order35 NSAPI already used (not sent)36 Regular deactivation37 QoS not accepted38 Network failure39 Reactivation required40 Feature not supported41 Semantic error in the TFT operation42 Syntactical error in the TFT operation43 Unknown PDP context44 Semantic errors in packet filter(s)45 Syntactical errors in packet filter(s)46 PDP context without TFT already activated47 Multicast group membership time-out81 Invalid transaction identifier value95 Semantically incorrect message96 Invalid mandatory information97 Message type non-existent or not implemented98 Message type not compatible with the protocol state99 Information element non-existent or not implemented100 Conditional IE error101 Message not compatible with the protocol state111 Protocol error, unspecified112 APN restriction value incompatible with active PDP context

104

Page 113: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix B. Graphic Representation of Parameter Values

Appendix B. Graphic Representation of Parameter Values

This appendix describes the bar length and color coding used to visualize parameter values in data views.

B.1. C/IBar length is proportional to (Value – (–5.0 dB)).

B.2. FER, RLC/LLC BLER/RetransmissionsBar length is constant.

Value = x (dB) Color

x > 15.0 green

10.0 ≤ x ≤ 15.0 yellow

x < 10.0 red

Value = x (%) Color

x = 0 green

1 ≤ x ≤ 4 yellow

x ≥ 5 red

LZT 138 0254 R1A 105

Page 114: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

B.3. RLC DL/UL ThroughputThis is used in the Map view only (no bars).

B.4. RxLevBar length is proportional to (Value – (–110 dBm)).

B.5. RxQualBar length is constant.

Value = x (kbit/s) Color

x ≥ 1000 green

100 ≤ x < 1000 yellow

10 ≤ x < 100 orange

x < 10 red

Value = x (dBm) Color

x ≥ –70 green

–80 ≤ x < –70 light green

–90 ≤ x < –80 yellow

–100 ≤ x < –90 orange

x < –100 red

Value = x Color

x = 0 green

1 ≤ x ≤ 4 yellow

x ≥ 5 red

106

Page 115: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix B. Graphic Representation of Parameter Values

B.6. TX PowerBar height is proportional to (Value – (–30 dBm)).

Value = x (dBm) Color

x < 5 green

5 ≤ x < 15 yellow

x ≥ 15 red

LZT 138 0254 R1A 107

Page 116: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Appendix C. Default Settings in TEMS Pocket Menus

This appendix lists the defaults for all settings editable from the Activity and Pocket menus.

C.1. Operating ModeActive mode

C.2. Cell Control Menu• All locking functions are by default turned off.

• Voice codec GSM: All codecs checked

• Ignore cell barred: Off

C.3. Events Menu• Event logging: Silent

• Event counters: On for all events

• Event settings: See section 8.3.5

C.4. Data Views MenuAll views visible (including the Map view)

Note: Unlike settings in other menus, these settings revert to their defaults when the phone is powered off and on.

108

Page 117: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Appendix C. Default Settings in TEMS Pocket Menus

C.5. GPS Menu• GPS connect: Off

• GPS device: Internal

• GPS time synch: Off

C.6. FTP Menu• FTP transfer

– Save file to (FTP Get): Memory stick

C.7. Logfile Menu• Save logfile to: Memory stick

• Autostart logfile: No options checked

• Upload logfile: Off

• Compress: Off

• FTP resume: Off

C.8. Command Sequence Menu• Voice settings

– Call duration: 10 s

– Guard time: 20 s

• Video settings

– Call duration: 10 s

– Guard time: 20 s

• FTP

– Guard time: 20 s

C.9. Tools Menu• Import settings: Memory stick

• Export settings: Memory stick

LZT 138 0254 R1A 109

Page 118: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

C.10. General Settings Menu• WAP data view: On

• Data view style: Themed

• Messages: Minimized

• Backlight: 5 minutes

• Cell Id format: Hex

• Power display: dBm

• Measure mode display: Sub

• Auto answer: Off

110

Page 119: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Index

Index

AAbout screen 82Activate PDP Context Failure Cause 95Activity key 6, 48Activity menu 6, 48, 53altitude 19AMR codecs

active set 34used on downlink 34used on uplink 34utilization of 34

APN 13ARQ mode (EGPRS) 29Auto Answer dialog 88Automatic Repeat Request Mode (EGPRS) 29Automatic Upload Failure Cause 95Autostart Logfile dialog 75

BBacklight dialog (display backlight) 87barred cells, accessing of 56Base Station Identity Code 20, 24, 25, 28, 33, 35, 39battery charging considerations 92BCCH ARFCN 14, 20, 23, 24, 25, 39BEP (EGPRS) 29BEP variance (EGPRS) 29bit error probability, mean (EGPRS) 29bit error probability, variance (EGPRS) 29BLER 30, 36, 37, 41block retransmission rate 30, 36, 37, 41BS-AG-BLKS-RES 25BSIC 14, 20, 24, 25, 28, 33, 35, 39BS-PA-MFRMS 21, 23, 25bytes transferred 30

LZT 138 0254 R1A 111

Page 120: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

CC value (EGPRS) 29C/I 26, 29, 32, 33

graphic representation 105C1 20, 39C2 20, 39C31 20, 39C32 20capture function (taking screenshots) 3, 10Carrier-to-interference ratio (C/I) 26, 29, 32, 33CC Cause 96CC events 62CCCH Configuration 25, 97cell control functions 7, 54

icon for 5, 49Cell Control menu 54Cell Id Format dialog 87Cell Identity 14, 23

presentation in dedicated/connected mode 3Cell Reselection Criterion (C2) 20, 39Cell Reselection Hysteresis 21, 23channel coding scheme (GPRS)

on downlink 29on uplink 29

Channel Mode 27Channel Type 27, 98charging of phone battery 92CI 14, 23

presentation format 87Ciphering Mode 27color coding of parameter values 9command sequence 8, 80

battery charging considerations 81, 92for FTP sessions 82for video calls 81for voice calls 81starting and stopping 52

Command Sequence menu 80compressing logfiles before upload 74, 79Connect GPS command 52

Ddata rate (GSM channel mode) 27

112

Page 121: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Index

data view actions 10Data View Style dialog 86data views 4, 9

browsing 4categories of 4display style 86general properties of 9survey of 11taking snapshots of 3, 10updating in replay mode 49visibility of 67

data views in text format 4, 13Data Views menu 67data views with graphs 2, 5, 38Deactivate PDP Context Cause 98default settings in TEMS Pocket menus 108Delay Class (PDP Context Request) 13, 100Disconnect GPS command 52Downlink Signalling Counter 25DRX Timer Max 31DSC (Current) 25DSC (Max) 25DTX rate

on downlink 26, 34on uplink 26, 34

EEGPRS modulation coding scheme 35EGPRS window size 31end-of-charge state (of phone battery) 92EoC 92Equivalent PLMN, time registered in 16event counters 49, 60

resetting 61viewing 60

event log 49, 51, 57clearing 58details of individual events 57viewing 57

event settings 58modifying 59viewing 58

LZT 138 0254 R1A 113

Page 122: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

events 7, 58enabling/disabling event logging and sound 58event log 58icons for 5, 61list of 62presentation in graphs 38

Events menu 56exporting TEMS Pocket settings 3, 84

FFER 26, 34

graphic representation 105filemarks, inserting in logfiles 48Frame Erasure Rate 26, 34FTP

duration of FTP session 17name of transferred file 17selecting server to upload logfiles to 80setting up Put and Get operations 71specifying FTP servers 73starting and stopping FTP sessions 51throughput 17total bytes transferred 18

FTP Data data view (no. 1.4) 17FTP menu 71FTP resume 80FTP server address 17FTP Server dialog 73, 80FTP session, direction of (UL/DL) 17FTP Settings dialog (command sequence) 82FTP Transfer dialog 71Full/Sub values (for RxLev and RxQual) 88

GGeneral Settings menu 85GMM Attached 15GMM Cause 98GMM events 64GMM State 31GPRS Cell Ranking Criterion (C32) 20GPRS Data data view (no. 3.2) 28

actions in 30GPRS Info data view (no. 3.3) 31

114

Page 123: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Index

GPRS Network Mode of Operation 31, 99GPRS Signal Strength Threshold Criterion (C31) 20, 39GPRS timeslots 28, 36, 41GPS 7

battery charging considerations 92Bluetooth pairing 69connect mode 69connecting and disconnecting 52date 19fix quality 19, 99number of satellites seen 19requirements on external GPS device 69selecting type of GPS device 70synchronizing phone clock with 71time 19using external GPS with TEMS Pocket 69using phone’s built-in GPS with TEMS Pocket 68

GPS Connect dialog 69GPS data view (no. 1.5) 19GPS Device dialog 70GPS menu 68GPS Time Synch dialog 71graphic presentation 9graphic representation of parameter values 105graphs 5graphs in data views 2GSM AMR data view (no. 3.5) 33GSM BA List data view (no 2.3) 24

actions in 24GSM C/I Info data view (no. 3.4) 32GSM Cell Id data view (no. 2.2) 23

actions in 24GSM Cells data view (no. 2.1) 20GSM Cells data view (no. 4.1, with graph) 39GSM Data data view (no. 4.2, with graph) 41GSM Serving Cell data view (no. 3.1) 25

Hhelp, on-screen 9Home PLMN, time registered in 16hopping channels 9, 20, 23, 24, 26, 28, 33, 35, 39, 41Hopping Sequence Number 27HSN 27

LZT 138 0254 R1A 115

Page 124: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Iicons

for cell control functions 54for events 61for logfile recording 49

Idle modetime spent in 16

Ignore Cell Barred dialog 56IMEI 82importing TEMS Pocket settings 3, 83IMSI 82indoor positioning by pinpointing 43Insert Filemark command 48invalid parameters, representation of 9

LLAC 14, 23

last registered 15presentation format 87

language support 8latitude 19LLC data transfer performance 30, 36LLC window size 31Location Area Code 14, 23Location Area properties 21, 39Lock ARFCN GSM dialog 54Lock Band GSM dialog 55Lock GSM cell 21, 24, 54Logfile menu 74logfile recording 7, 74

automatic triggering of 74, 75icon for 4starting/stopping manual recording 49where to save files 75

logfile replay 7, 49, 74controlling 50status icons for 5

logfile uploading via FTP 77from phone file system 90resumption after loss of FTP connection 3, 80

Logical Channel 20, 23, 24, 25, 26, 28, 33, 35, 39longitude 19

116

Page 125: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Index

MMAIO 27Map view 2, 5, 43

assigning geographical position to map image 47color-coding of route markers 44loading map image into 43zoom level 44

Map view (no. 1.6) 19MCC 14

last registered 15Mean Throughput (PDP Context Request) 13, 101Measure Mode Display dialog 88memory

low memory condition 6, 49memory sticks 8, 72, 74, 75, 77, 85menus 6

default settings in 108messages (displaying of) 87Messages dialog 87MM Cause 100MM events 62MM/GMM data view (no. 1.2) 15MNC 14

last registered 15Mobile Allocation Index Offset 27Mobile Country Code 14Mobile Network Code 14modulation coding scheme on downlink (EGPRS) 35modulation coding scheme on uplink (EGPRS) 36modulation method on downlink (GPRS/EGPRS) 29modulation method on uplink (GPRS/EGPRS) 29MS-TXPWR-MAX-CCH 21, 23

NNeighbor Cell BCCH 21, 23, 39neighbors 21, 24, 39Network Mode of Operation 31NMO 31No Service mode, time spent in 16NSAPI 13

OOperational Mode 48

LZT 138 0254 R1A 117

Page 126: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

overview of TEMS Pocket 4

PPacket Dedicated Traffic Channel 26, 28, 33, 35, 41Packet Final Block Timer 31Packet TMSI 15Packet Uplink Assignment Timer 31parameter values 95Pathloss Criterion (C1) 20, 39PDCH, time using 16PDP address (IPv4) 13PDP Context data view (no. 1.1) 13PDP Context Request parameters 100PDTCH 26, 28, 32, 33, 35, 41Peak Throughput (PDP Context Request) 13, 101phone charger, choice of 92pinpointing 2, 7, 43, 44

starting 45stopping 46

Pocket menu 6, 52, 53positioning

by GPS 7by pinpointing 7

Power Display dialog 88Precedence Class (PDP Context Request) 13, 101PTMSI 15

QQuick guide 83

RRAC 14

last registered 15RACo 20, 39Radio Link Timeout 26RAT, current 14Receive Bit Error Rate 26, 34Reliability Class (PDP Context Request) 13, 101replaying logfiles 49

controlling the replay 50status icons for 51

Reset All command (General settings menu) 89Reset Control Settings command 56resetting all General settings 89

118

Page 127: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Index

resetting cell control settings 56resumption of logfile upload 80RLC/LLC BLER/retransmissions, graphic representation 105RLC/MAC data transfer performance 30, 37, 41

presented in graph 42RLC/MAC data transfer performance (GSM)

presented in graph 42RLT 26Roaming PLMN, time registered in 16Routing Area Code 14Routing Area Color 20, 39Routing Area properties 21, 39Routing Area Update Failure Cause 102RR Cause 102RR events 65RR Internal Cause 103RxLev 14, 20, 23, 24, 25, 28, 33, 35, 39

Full/Sub values 88graphic representation 106presentation format 88presented in graph 40

RxQual 26, 34Full/Sub values 88graphic representation 106

SSave Logfile To dialog 75SDCCH 26, 28, 33, 35, 41serving cell 20, 23, 24, 25, 39Serving Cell Barred 21, 23Serving Cell BCCH 28, 33, 35Session events 66SM Cause 103SM events 63snapshots of data views, taking 3, 10Sony Ericsson C905/C905a 2Sony Ericsson W995 EDGE 1speed 19Stand-alone Dedicated Control Channel 26, 28, 33, 35, 41Start Command Sequence command 52Start FTP command 51Start Logfile Recording command 49Start Logfile Replay command 49

LZT 138 0254 R1A 119

Page 128: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS Pocket 7.2 for Sony Ericsson W995 EDGE – User’s Manual

Stop Command Sequence command 52Stop FTP command 51Stop Logfile Recording command 49Stop Logfile Replay command 49storage medium, choice of 8Subchannel Number 27support contact information 94

TT3168 timer start value 31T3192 timer start value 31T3212 timer current value 15T3212 timer max value 15T3314 timer current value 31T3314 timer start value 31TCH 26, 28, 32, 33, 35, 41

time using 16Temporary Logical Link Identifier 15Temporary Mobile Subscriber Identity 15TEMS Automatic 68, 71, 74TEMS Investigation 7, 49, 50, 68, 74TEMS Pocket product package 82TEMS Pocket version 82TEMS Presentation 7, 49, 68throughput 30, 36, 37, 41

presented in graph 42Time Log data view (no. 1.3) 16

actions in 16Timeslot Number 26, 33timeslots used by GPRS 28, 36, 41Timing Advance 26, 34TLLI 15TMSI 15Tools menu 82Traffic Channel 26, 28, 33, 35, 41

time using 16Traffic Channel Type 28, 33, 41TX Power

graphic representation 107TxPower 26, 33

UUE Transmit Power 26, 33

120

Page 129: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

Index

Upload Logfile dialog 77

VVideo Settings dialog (command sequence) 81Voice Codec GSM dialog 55voice codecs 27

setting preferred in GSM 55Voice Settings dialog (command sequence) 81

WW/G Cells data view (no. 1.1)

actions in 21WAP browser data views

visibility of 86WAP browser GPRS data view 35WAP Data View dialog 86what was new in TEMS Pocket 7.0 2what’s new in TEMS Pocket 7.2 1

LZT 138 0254 R1A 121

Page 130: TEMS Pocket 7.2 for Sony Ericsson W995 EDGE -- User_s Manual

TEMS™ Optimization Solutions – the number one choice for operators

worldwide. For every stage of a wireless network’s life cycle and supporting

all major technologies, the TEMS portfolio helps operators maximize their

Quality of Service and get the most out of their network investment.

The experience and technological leadership of TEMS gives network

operators the strong partnership they need and a commitment to quality,

accuracy, and success.

TEMS Optimization Solutions – Making Wireless Better.