TAI External Source Approved Processes List November - · PDF filemil-h-6875,ams2759,ams 2750 heat treatment of steel raw materials,heat treatment of steel parts, general requirements,pyrometry

TAI External Source Approved Processes List

This is the TAI list of External Source Approved Processes.

Publication of this neither engages TAI in any contract relationship/responsibility nor allows automatic contract authorization, ordering, etc.

Suppliers remain liable for fully managing their relationship with sub-tiers.

For any further information, please contact directly TAI Process Control Department.

© TAI 2013. All rights reserved. This document contains TAI proprietary information and shall at all times remain the property of TAI; no intellectual property right or license is granted by TAI in connection with any information contained in it. It is supplied on the express condition that said information is treated as confidential, shall not be used for any purpose other than that for which it is supplied, shall not be disclosed in whole or in part, to third parties other than the TAI subcontractors and suppliers (to the extent of their involvement in TAI projects), without TAI’s prior written consent.

Processes classifications ;

SP-TASP-TCAUNSP-TASP-CA

: Special Process with only TAI Approval: Special Process with both TAI & Customer Approval: Not special but requires TAI Approval: Special Process with only Customer Approval

November - 2017

11/15/2017 9:14:34 AM1 / 32

SUPPLIER NO SUPPLIER NAME ADDRESS CITY COUNTRY PROCESS

SPECIFICATION PROCESS DESCRIPTION PROJECTSPROCESS APPROVAL TYPE

ISSUE DATE

APPROVAL DUE DATE

REMARKS / LIMITATIONS

2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TPS 260 PAINT APPLICATION, GENERAL TAI

PROGRAMS SP-TCA 23.10.2015 N/A

2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TPS 271 APPLICATION OF EXTERNAL PAINT

SYSTEMSTAI PROGRAMS SP-TCA 23.10.2015 N/A

2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TPS 250 PRIMER APPLICATION TAI


2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TAS 210 SEALANT APPLICATION TAI


LIMITATION: FREEZING AND DEFORSTING OF THE SEALANTS ARE NOT APPLICABLE.

2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TPS 210 CHEMICAL FILM TREATMENT TAI

PROGRAMS SP-TCA 23.10.2015 N/ALIMITATION: ONLY FOR BRUSH APPLIACATION

2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TAS 001 RIVET INSTALLATION, SOLID FLUSH

AND PROTRUDING HEADSTAI PROGRAMS UNSP-TA 04.11.2015 N/A SPAR-2909-56-15

2909 2.HAVA IKMAL BAKIM MRK.K.LIGI DONER SERMAYE GENEL MUDURLUGU Kayseri TÜRKİYE TPS 270

APPLICATION OF WATER-REPELLENT, WATERDISPLACING AND CORROSION INHIBITING PREVENTIES

TAI PROGRAMS UNSP-TA 05.11.2015 N/A SPAR-2909-56-15

13734 AAA ASSISTANCE AÉRONAUTIQUE & AÉROSPATIALE GMBH Hein-SaB-Weg 36 Hamburg GERMANY I+D-P 117 STEEL AND TITANIUM HI-LOK FASTENERS

AIRBUS SEC-18 SP-TCA 11.09.2015 N/A ONLY FOR REPAIR

APPLICATION

13734 AAA ASSISTANCE AÉRONAUTIQUE & AÉROSPATIALE GMBH Hein-SaB-Weg 36 Hamburg GERMANY I+D-P-060 APPLICATION OF PAINTS, ONLY FOR REPAIR APPLICATION


APPLICATION.

13734 AAA ASSISTANCE AÉRONAUTIQUE & AÉROSPATIALE GMBH Hein-SaB-Weg 36 Hamburg GERMANY I+D-P 146 APPLICATION OF SEALANTS, ONLY FOR REPAIR APPLICATION


APPLICATION.

13734 AAA ASSISTANCE AÉRONAUTIQUE & AÉROSPATIALE GMBH Hein-SaB-Weg 36 Hamburg GERMANY I+D-P 117 STEEL AND TITANIUM HI-LOK FASTENERS

AIRBUS SEC-18 SP-TCA 11.09.2015 N/A SPAR 13734-10-15

6269 ADA SAVUNMA SANAYI MAK. IMLT. MUH. SAN. VE TIC. LTD. STI.

Organize Sanayi BölgesiGöktürk caddesi NO: 1 Ankara TÜRKİYE 80-T-30-9910

DRILLING,REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 19.10.2015 N/A

23583 AG HAVACILIK SANAYİ VE TİCARET ANONİM ŞİRKETİOrganize Sanayi Bölgesi 102. Cadde No:6 Odunpazarı Eskişehir Eskişehir TÜRKİYE 80-T-30-9910

DRILLING, REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 23.01.2017 N/A 23583-16-PCA001

23583 AG HAVACILIK SANAYİ VE TİCARET ANONİM ŞİRKETİOrganize Sanayi Bölgesi 102. Cadde No:6 Odunpazarı Eskişehir Eskişehir TÜRKİYE 80-T-30-6918 FINISHING OF METAL COMPONENTS

(DEBURRING, CLEANING A400M UNSP-TA 23.01.2017 N/A 23583-16-PCA001

23583 AG HAVACILIK SANAYİ VE TİCARET ANONİM ŞİRKETİOrganize Sanayi Bölgesi 102. Cadde No:6 Odunpazarı Eskişehir Eskişehir TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC

COMPONENTS A400M UNSP-TA 25.01.2017 N/A 23583-16-PCA001

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8669 ADHESIVE BONDING, CLASS IC, IIA, IIB SIKORSKY SP-CA 04.08.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8752 ANODIC COATINGS, PHOSPHORIC ACID ANODIZE, PRE-BOND SIKORSKY SP-CA 04.08.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8806 FLUORESCENT PENETRANT INSPECTION SIKORSKY SP-CA 04.08.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE ASTM E18 ROCKWELL HARDNESS OF METALLIC MATERIALS SIKORSKY SP-CA 04.08.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE MIL-STD-1537,SS8810

ELECTRICAL CONDUCTIVITY TEST FOR VERIFICATION OF HEAT TREATMENT OF ALUMINUM ALLOYS EDDY CURRENT METHOD,ELECTRICAL CONDUCTIVITY TEST FOR MEASUREMENTS OF HEAT TREATMENT OF ALUMINUM ALLOYS

SIKORSKY SP-CA 05.08.2015 N/A

11/15/2017 9:14:34 AM2 / 32



ISSUE DATE

APPROVAL DUE DATE


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYEMIL-H-6875,AMS2759,AMS2750

HEAT TREATMENT OF STEEL RAW MATERIALS,HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS,PYROMETRY


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE AMS 2770,AMS 2750HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS INCLUDING 7075 T73,PYROMETRY


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8805,NAS 410

INSPECTION PROCESS, MAGNETIC PARTICLE,NAS CERTIFICATION AND QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE MIL-STD-865,SS8443,SS8407

SELECTIVE (BRUSH PLATING), ELECTRODEPOSITION, STRESS RELIEF AND EMBRITTLEMENT RELIEF BAKING AFTER PLATING OF STEEL PARTS


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8767,SS8769SHOT PEENING OF ALUMINUM ALLOYS,SHOT PEENED METAL PARTS, LOCAL REWORK OF


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE AMS-S-13165,SS8768

SHOT PEENING OF METAL PARTS,SHOT PEENING OF STEEL ALLOYS


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8766 SHOT PEENING OF TITANIUM ALLOYS SIKORSKY SP-CA 05.08.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8705,NAS 410

SURFACE TEMPER ETCH INSPECTION,NAS CERTIFICATION AND QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE 81QD009 PENETRANT INSPECTION CRITERIA KAI PROGRAM SP-CA 31.07.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE ASTM E 1417 STANDARD PRACTICE FOR LIQUID PENETRANT TESTING

KAI PROGRAM SP-CA 31.07.2015 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE MIL-STD-865, SS8443, SS8407 BRUSH CADMIUM PLATING SIKORSKY SP-TCA 26.05.2017 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS8482 PHOSPHORIC ACID ANODIZING SIKORSKY SP-TCA 26.05.2017 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE MIL-STD-1537, SS8810 LAB 8 CONDUCTIVITY SIKORSKY SP-TCA 29.06.2017 N/A

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE ASTM E-18, ASTM E-384 LAB 7 HARDNESS SIKORSKY SP-TCA 29.06.2017 N/A 3177-16-PCA001

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE ASTM E-3 LAB 5 METALLOGRAPHIC SIKORSKY SP-TCA 29.06.2017 N/A 3177-16-PCA001

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYEAMS-H-6875, AMS 2759, AMS 2759/1, AMS 2750, SS9213

HS1: HEAT TREATMENT OF AIRCRAFT STEELS SIKORSKY SP-TCA 29.06.2017 N/A 3177-16-PCA001

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYESS8043, SS8013, SS8810, AMS2770, AMS 2750, SS9213

HA1: HEAT TREATMENT OF ALUMINUM ALLOYS (INCLUDING 7075 T73)

SIKORSKY SP-TCA 29.06.2017 N/A 3177-16-PCA001

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYEMIL-STD-2219, AWS D17.1, SS 8440, SS 8441, SS 8446, SS 9213

FUSION WELDING, ALUMINUM

SIKORSKY, TUHP (GENEL MAKSAT HELİKOPTERİ)

SP-TCA 18.07.2017 N/A 3177-17-PCA002

11/15/2017 9:14:34 AM3 / 32



ISSUE DATE

APPROVAL DUE DATE


3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS 8483 TYPE II & MIL-A-8625 SULPHURIC ACID ANODIZING


SP-TCA 16.07.2017 N/A

APPROVED TANKS: TANK-3, TANK-4, TANK-5, TANK-6, TANK-7, TANK-11, TANK-12, TANK-13, TANK-19, TANK-20, TANK-21

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS 8806 NAS 410 LIQUID PENETRANT INSPECTION SIKORSKY SP-TCA 29.06.2017 N/A

METHOD A WATER WASHABLE PENETRANT SYSTEMS

3177 ALP HAVACILIK SAN. A.S. Organize San. Böl 8. Cad. Eskişehir TÜRKİYE SS 8049 STEEL, 4340, PROCESS OF


SP-TCA 18.07.2017 N/A

PCQR-112-173177-17-PCA001APROOVED UNITS(FURNACES, TANKS: ALP-M-036, ALP-M-037, ALP-M-053, VACHEAT, ALP-M-036 QUENCH, ALP-M-053 QUENCH)

13232APEKS HAVACILIK TASARIM SAVUNMA MUHENDISLIK DANISMANLIK LTD.

Saraykent San. sit. 73.sok. no:10 Kahramankazan7Ankara Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 25.11.2015 N/A

10259 ARAL HAVACILIK SANAYİ VE TİCARET LTD. ŞTİ.SARAY MH. KERESTECİLER SİTESİADNAN MENDERES BULVARINO:42 SARAYKÖY - KAZAN

Ankara TÜRKİYE SS-8693BRUSH COATING AND TOUCH UP OF ALUMINUM AND ALUMINUM ALLOY SURFACE TREATMENTS


UNSP-TA 18.10.2017 N/A


Ankara TÜRKİYE SS-8486CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS


UNSP-TA 28.09.2017 N/A

BONDERITE M-CR 1200S AERO IS APPROVED CHEMICAL FOR CLASS 1A AND BONDERITE M-CR 600 AERO IS APPROVED CHEMICAL FOR CLASS 3 PROCESS.


Ankara TÜRKİYE BAC 5736, BAC 5845, BAC 5882

APPLICATION OF CHEMICAL SOLVENT RESISTANT FINISHES, APPLICATION OF POLYURETHANE ENAMEL, APPLICATION OF URETHANE COMPATIBLE PRIMER

BOEING SP-TCA 02.10.2015 N/A


Ankara TÜRKİYE BAC 5632 BORIC SULPHURIC ANODIZE BOEING SP-TCA 15.10.2015 N/A


Ankara TÜRKİYE BAC 5821 HARD ANODIZING BOEING SP-TCA 15.10.2015 N/A


Ankara TÜRKİYE BAC 5423 / ASTM-E-1417 PENETRANT INSPECTION BOEING SP-CA 05.08.2015 N/A


Ankara TÜRKİYE BSS 7039 LIQUID PENETRANT INSPECTION BOEING SP-CA 05.08.2015 N/A


Ankara TÜRKİYE BAC 5637 ZINC NICKEL ALLOY PLATING BOEING SP-CA 05.08.2015 N/A


Ankara TÜRKİYE ASTM-B117 SALT SPREY TESTING JSF-CENTER FUSELAGE SP-TCA 20.06.2016 N/A

11/15/2017 9:14:34 AM4 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE LMA-PJ264 2ZZP00001

APPLICATION AND CONTROL OF ORGANIC FINISHES FINISH SPECIFICATION FOR F-35 WEAPON SYSTEM

JSF-CENTER FUSELAGE SP-TCA 12.06.2016 N/A


Ankara TÜRKİYE BAC 5637 ZINC-NICKEL ALLOY PLATING BOEING SP-TCA 26.05.2017 N/A


Ankara TÜRKİYE SS-8435 PASSIVATION OF CORROSION RESISTANT STEEL


UNSP-TA 03.08.2017 N/A


Ankara TÜRKİYE BAC 5019/MIL-A-8625 TYPE I CHROMIC ACID ANODIZE BOEING SP-TCA 26.05.2017 N/A

APPROVED ONLY CLASS 1, CLASS 3 AND CLASS 5 FOR BAC 5019. TYPE I FOR MIL-A-8625


Ankara TÜRKİYE BAC 5861 PHOSPHATE FLUORIDE COATINGS BOEING SP-TCA 26.05.2017 N/A FOR TITANIUM PARTS


Ankara TÜRKİYE MIL-C-5541 CHEMICAL CONVERSION COATINGS ON ALUMINIUM ALLOYS


LIMITATION TO CLASS 1A AND CLASS 3


Ankara TÜRKİYE BAC 5625 METHOD II

PASSIVATION FOR CORROSION RESISTANCE STEEL BOEING UNSP-TA 23.06.2014 N/A

LIMITATION: METHOD 2


Ankara TÜRKİYE BAC 5719, MIL-DTL-5541 CHEMICAL CONVERSION COATING BOEING SP-TCA 02.10.2015 N/A

LIMITATION: PROCESS IS RESTRICTED ONLY FOR ALODINE 600 AND 1500 CHEMICALS.


Ankara TÜRKİYE BAC 5701, SAE AMS QQ-P416 CADMIUM PLATING BOEING SP-TCA 02.10.2015 N/A

LIMITATION: PROCESS IS RESTRICTED ONLY TYPE I, II; CLASS I, II, III PARTS.


Ankara TÜRKİYE LMA-PG001 ETCHING/CLEANING PRIOR TO PENETRANT INSPECTION

JSF-CENTER FUSELAGE SP-TCA 10.06.2016 N/A LIMITED TO

ALUMINUM ALLOY


Ankara TÜRKİYE SS-8806 PRE-PENETRANT ETCH


SP-TCA 18.08.2017 N/A

LIMITED TO ALUMINUM ALLOYS, APPROVED PROCESS STANDARTS: ARAL-CP.23


Ankara TÜRKİYE BAC 5632 BORIC SULPHURIC ACID ANODIZE BOEING SP-TCA 26.05.2017 N/A

LIMITED TO CLASS 1 AND CLASS 5SQCS-182-27-10 IS CANCELLED AND REPLACED WITH SQCS-10259-187-15 DUE TO TYPING ERROR OF SUPPLIER NUMBER


Ankara TÜRKİYE MIL-A-8625 ANODIC COATINGS FOR ALUMINIUM AND ALUMINIUM ALLOYS

JSF-CENTER FUSELAGE SP-TCA 10.06.2016 N/A LIMITED TO TYPE 1B


Ankara TÜRKİYE TPS-216 PHOSPHATE TREATMENT (TYPE Z) TAI PROGRAMS SP-TA 14.08.2017 N/A LIMITED TO TYPE Z

11/15/2017 9:14:34 AM5 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE LMA-PC201

REQUIREMENTS FOR FLUORESCENT PENETRANT INSPECTION OF METALLIC PARTS AND MATERIALS


METHOD A WATER WASHABLE PENETRANT SYSTEMALUMINUM ALLOY PARTS ONLYCRITICAL PARTS EXCLUDED, NOT ALLOWED TO PROCESS CRITICAL PARTS


Ankara TÜRKİYE SS8806 INSPECTION, LIQUID PENETRANT SIKORSKY SP-TCA 29.06.2017 N/A

METHOD A WATER WASHABLE PENETRANT SYSTEMALUMINUM ALLOY PARTS ONLYETCHING IS NOT ALLOWED


Ankara TÜRKİYE SS8483/MIL-A-8625 SULPHURIC ACID ANODIZE TREATMENT ONLY FOR TYPE II SIKORSKY SP-TCA 15.10.2015 N/A ONLY FOR TYPE II


Ankara TÜRKİYE BAC5710 APPLICATION OF SPECIAL PURPOSE COATINGS BOEING UNSP-TA 04.07.2017 N/A TYPE 27 ONLY

24118 ARCONIC FORGINGS AND EXTRUSIONS

Dale Road NorthMatlock, Derbyshire Derbyshire UNITED

KINGDOM ASTM E-1417 STANDART PRACTICE FOR LIQUID PENETRANT TESTING

TLUH (ÖZGÜN HELİKOPTER) SP-TA 04.10.2017 N/A 24118-17-PCA002

24118 ARCONIC FORGINGS AND EXTRUSIONS

Dale Road NorthMatlock, Derbyshire Derbyshire UNITED

KINGDOM AMS-STD-2154 INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR

TAI PROGRAMS SP-TA 11.05.2017 N/A 24118-17-PCA001

13209 ARİL HAVACILIK SAVUNMA SAN.LTD.ŞTİ.Uzayçağı Caddesi 1272.Sokak No:6 Ostim/Ankara Ankara TÜRKİYE 80-T-30-9910


AIRBUS SEC-19 SP-TA 25.11.2015 N/A

21323 ATI FORGED PRODUCTS - CUDAHY OPERATIONS

5481 South Packard Avenue Cudahy, WI 53110 USA Milwaukee

UNITED STATES OF AMERICA

AMS-H-81200 HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS


21323 ATI FORGED PRODUCTS - CUDAHY OPERATIONS

5481 South Packard Avenue Cudahy, WI 53110 USA Milwaukee


AMS-STD-2154 INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR


24275 AUBERT & DUVAL - ISSOIRE

Aubert et Duval,Le Piat,BP 4563502 Issoire

Cedex FRANCE AMS 2772 HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS


24275 AUBERT & DUVAL - ISSOIRE

Aubert et Duval,Le Piat,BP 4563502 Issoire

Cedex FRANCE AMS-STD-2154 INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR


15123 AYCAN HAVACILIK SANAYİ VE TİCARET LTD.ŞTİ Organize Sanayi Bölgesi 7. Cadde No:46 Eskişehir TÜRKİYE 80-T-30-9910DRILLING,REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 19.10.2015 N/A

4408 B PLAS BURSA PLASTIK INS. VE TURIZIM SAN. VE TIC. A.S.

DOSAB., ORKİDE SOKAK,NO:15, Demirtaş Bursa TÜRKİYE AIPS 03-02-008

THERMOFORMING OF THERMOPLASTIC SHEET MATERIALS

A400M SP-TA 20.12.2010 N/A

382 BIRBEN MAKINA TIC. LTD. STI.

İvedik Organie Sanayi Bölgesi Agaç İşleri Sanayi Sitesi 21. cadde 523. sokak No:38 Ankara TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC



İvedik Organie Sanayi Bölgesi Agaç İşleri Sanayi Sitesi 21. cadde 523. sokak No:38 Ankara TÜRKİYE 80-T-30-6918

DEBURRING AND MANUAL REWORK OF METALLIC COMPONENTS (DEBURRING, CLEANING)

A400M UNSP-TA 11.04.2017 N/A 382-17-PCA001

11/15/2017 9:14:34 AM6 / 32



ISSUE DATE

APPROVAL DUE DATE



İvedik Organie Sanayi Bölgesi Agaç İşleri Sanayi Sitesi 21. cadde 523. sokak No:38 Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 11.04.2017 N/A 382-17-PCA001

8243 BODYCOTE ISTAS ISIL ISLEM SANAYI VE TICARET A.S.

Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE TPS 382 HEAT TREATMENT OF STEEL TAI

PROGRAMS SP-TA 12.12.2014 N/A

APPROVED DEVIATION DATE:18/11/2014

UBQ1 STEEL HARDENING FURNACE (CLASS 3), UBT3 TEMPERING FURNACE (CLASS 2), V2 VACUUM HARDENING FURNACE (CLASS 3)


Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE

AMS 2759,AMS-H-6875-,SS9213,ASTM E3,ASTM E10,ASTM E10,ASTM E18,ASTM E384

AIRCRAFT STEELS,METALLOGRAPHY,HARDNESS

SIKORSKY SP-TCA 12.12.2016 13.12.2018 8243-16-PCA001


Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE TSP-382 HEAT TREATMENT OF STEEL TAI


PCQR-32-10, SCAR-8243-01-10, SPAR-8243-12-10QUALIFICATION COVERS ONLY SAE 4340 MATERIALQUALIFIED FURNACES ARE M7, SAC1, SAC2, VM2DEVIATIONS 003/10, 004/10 ARE ACCEPTED


Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE AMS 2728 HEAT TREATMENT OF WROUGHT

COPPER BERYLLIUM ALLOY PARTS ATAK SP-TA 07.01.2016 N/A PCQR-ATK-01-16SPAR-8243-01-2016


Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE STA100-81-40 HEAT TREATMENT OF STEEL AGUSTA

WESTLAND SP-TCA 21.11.2014 21.11.2017

UBQ1 STEEL HARDENING FURNACE (CLASS 3), UBT3 TEMPERING FURNACE (CLASS 2), V2 VACUUM HARDENING FURNACE (CLASS 3)


Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE AMS 5662 HEAT TREATMENT OF NICKEL

ALLOY ATAK SP-TA 20.10.2015 N/AV2 VACUUM HARDENING FURNACE (CLASS 3)


Dilovası IMES OSB (Gebze VI. Makine İhtisas) Imes Bulvarı No:12 Kocaeli TÜRKİYE AMS 2759/3

HEAT TREATMENT PRECIPITATION-HARDENING CORROSION RESISTANT AND MARAGING STEEL PARTS

KUH SP-TCA 15.12.2014 N/A

V2 VACUUM HARDENING FURNACE (CLASS 3), UBT3 TEMPERING FURNACE (CLASS 2)

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 34-9000-1 STRUCTURAL BONDING WITH

PASTE ADHESIVESEUROCOPTER SP-TCA 29.06.2017 N/A

11695-17-PCA001

QUALIFICATION IS VALID FOR USE OF PADDING MATERIAL ECS 6071-1090 FOR THE BONDING OPERATION AT L711M1075101.

11/15/2017 9:14:34 AM7 / 32



ISSUE DATE

APPROVAL DUE DATE


11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045-31-2910

MANUFACTURE OF PARTS FROM PREIMPREGNATED FIBER-COMPOSITE MATERIALS USING MANUAL LAMINATION

EUROCOPTER SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 31-2920

PROCEDURE FOR THE REPAIR AND MANUFACTURE OF COMPONENTS USING WET LAMINATE

EUROCOPTER SP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 34-3030 INSTALLATION OF INSERTS IN

HONEYCOMB STRUCTURESEUROCOPTER SP-TCA 29.06.2017 N/A 11695-17-PCA001


COATING WITH TWO-COMPONENT EP-BASED PRIMER, CHROMATE FREE



COATING WITH TWO-COMPONENT PRIMER, EP BASED, CHROMATE-FREE, WATER BASED VOC 250G/L


11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 35-9120 COATING WITH PAINTS, GENERAL EUROCOPTE

R SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 80-E-34-9032 BONDING NONSTRUCTURAL JOINTS EUROCOPTE

R SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 80-E-35-5404 APPLYING PORE FILLER EUROCOPTE

R UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 31-2910-1

MANUFACTURE OF STRUCTURAL FIBER-REINFORCE PLASTIC (FRP) COMPONENTS BY USING MATRIX M18/1, 145.8


11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 34-5810 INSTALLATION OF SOLID MONEL

RIVETSEUROCOPTER SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 34-5819 INSTALLATION OF COMPOSI-LOK

BLIND RIVETSEUROCOPTER SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 34-5840 INSTALLATION OF CAMLOC QUICK

RELEASE FASTENERSEUROCOPTER SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 80-E-34-9600 USE OF SEALING COMPOUNDS EUROCOPTE

R SP-TCA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 80-E-35-5256 COATING WITH CONDUCTIVITY

PAINTEUROCOPTER SP-TCA 29.06.2017 N/A 11695-17-PCA001


CLEANING WITH ORGANIC SOLVENTS (COLD CLEANING AGENTS)

EUROCOPTER UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 35-5106 COATING WITH PUR-BASED TOP

COATEUROCOPTER UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 35-9030 APPLICATION OF FILLERS EUROCOPTE

R UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 80-E-39-0132 LABELING WITH INDELIBLE INK EUROCOPTE

R UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 80-E-39-0210 MECHANICAL WORKING OF CORE

MATERIALSEUROCOPTER UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE EI045 30-0032 MACHINING OF FRP COMPONENTS EUROCOPTE

R UNSP-TA 29.06.2017 N/A 11695-17-PCA001

11165 C.E.S. İLERİ KOMPOZİT VE SAVUNMA TEKN. SAN. VE TİC. A.Ş.Anadolu Org. San. Bolgesi 12. Cadde No:20 Malıkoy Sincan ANKARA Ankara TÜRKİYE AITM 6-4005

ULTRASONIC PULSE-ECHO INSPECTION OF CARBON FIBRE PLASTICS

A400M SP-TCA 11.08.2017 N/A

ONE EQUIPMENT IS APPROVED WITH THIS SQCS.

EQUIPMENT#1 OMNISCAN SX S/N: QC-004903 WITH CONVENTIONAL 5 MHZ TRANSDUCER

11/15/2017 9:14:34 AM8 / 32



ISSUE DATE

APPROVAL DUE DATE


10429 CETEK MAKİNA İML. İTH. İHR. SAN. TİC. LTD. ŞTİOstim OSB Mah.1187.cadde No: 22-24 Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 25.11.2015 N/A

9719 CNK HAVACILIK SANAYİ VE TİC. LTD. ŞTİ.İMES Sanayi Sitesi E Blok 501. Sokak No:37 Y.Dudullu - Ümraniye İstanbul TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A SPAR-9719-43-2015

7012 COSKUNOZ SAVUNMA VE HAVACILIK SAN. TİC. A.S.

Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE BAC-5000 GENERAL SEALING BOEING UNSP-TA 08.07.2014 N/A


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE 80-T-30-9910


A400M SP-TA 10.12.2015 N/A


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE 80-T-30-6918 FINISHING OF METAL COMPONENTS AIRBUS SEC-

19 UNSP-TCA 17.06.2016 N/A


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE 80-T-39-0132 MARKING WITH INDELIBLE INK AIRBUS SEC-

19 UNSP-TCA 17.06.2016 N/A


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE AITM6-6004

DETERMINATION OF ELECTRICAL CONDUCTIVITY OF ALUMINIUM ALLYOS BY EDDY CURRENT METHOD

AIRBUS SEC-19 SP-TCA 17.06.2016 N/A


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE 80-T-35-0014 CLEANING WITH ORGANIC

SOLVENTSAIRBUS SEC-19 UNSP-TCA 17.06.2016 N/A


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC

COMPONENTSAIRBUS SEC-19 UNSP-TCA 25.10.2016 N/A 7012-16-PCA001


Organize Sanayi Bolgesi, 19.Cad. No: 16 Eskişehir TÜRKİYE 80-T-30-9910



QUALIFIED WITH LIMITATIONS(PROCESS IS LIMITED TO SATISFY DRAWING REQUIREMENTS OF SECTION 19. MANUEL DRILLING VIA DRILL GUNS OR COMPARABLE MEANS WAS NEITHER APPLIED NOR AUDITED)

6623 DALTEKS MAKİNE VE HAVACILIK SAN. A.Ş.Yenidoğan mah.Ferhatpaşa Cad.Dalkıran işmerkezi no:24 İstanbul TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

7331 DIZAYN MAKINA VE MUHENDISLIK SAN.TIC. LTD. STI. Ahi Evran Cad. 36. Sok. No:1 Ostim Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

6067

EMGE ELEKTROMEKANİK GEREÇLER END. KOLL. ŞİRKETİ (AHMET MİTHAT ERTUĞ, HÜSEYİN MUNİP ERTUĞ)

Ahi Evran Cad, 1211. Sok. No:14 Ostim Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

8519 EPSILON HAVACILIK UZAY VE SAVUNMA SAN. TIC.LTD.STI.

1219. SOK. NO: 5 OSTİM-YENİMAHALLE / ANKARA Ankara TÜRKİYE TPS-740

RESIN IMPREGNATED GLASS, CARBON AND ARAMID FIBER REINFORCED COMPOSITE PARTS (LAMINATE MANUFACTURING)

TAI PROGRAMS SP-TA 19.11.2012 N/A PCQR-71-12

8519 EPSILON HAVACILIK UZAY VE SAVUNMA SAN. TIC.LTD.STI.

1219. SOK. NO: 5 OSTİM-YENİMAHALLE / ANKARA Ankara TÜRKİYE TPS-702 COMPOSITE MACHINING TAI

PROGRAMS SP-TA 19.11.2012 N/A PCQR-72-12

17453 EPSILON KOMPOZIT TEKNOLOJI SAVUNMA SANAYI TIC. A.S.

Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0001 FINISH REQUIREMENTS KUH/KAI SP-TA 31.12.2015 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0026 GENERAL PURPOSE ADHESIVE

APPLICATION KUH/KAI SP-TA 31.12.2015 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0025 SEALING REQUIREMENTS KUH/KAI UNSP-TA 31.12.2015 N/A

11/15/2017 9:14:34 AM9 / 32



ISSUE DATE

APPROVAL DUE DATE



Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88TM0002

FASTENER INSTALLATION, PIN, BOLT AND BLIND TYPE FASTENERS - FLUSH AND PROTRUDING HEADS

KUH UNSP-TA 05.01.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88TM1131 PROCEDURE FOR FASTENER GRIP

LENGTH VARIATION KUH UNSP-TA 05.01.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0006 MARKING OF AIRCRAFT PARTS KUH UNSP-TA 05.01.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0024 ULTRASONIC INSPECTION OF

BONDED AND COMPOSITE PARTS KUH SP-TA 05.01.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0015 DESIGN, MANUFACTURE AND

APPLICATION OF MARKINGS KUH UNSP-TA 05.01.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE AIPS 08-02-003 IDENTIFICATION BY BAG AND TAG A400M UNSP-TA 11.03.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE AIPI05-05-009

PRESERVATION OF CUT EDGES OF CARBON FIBRE COMPOSITE PARTS TO PREVENT GALVANIC CORROSION ON ATTACHED METAL PARTS

A400M SP-TA 16.05.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-35-5035

COATING WITH TWO-COMPONENT WATER-BASED PRIMER FOR FIBER COMPOSITES, CHROMATE-FREE

A400M SP-TA 15.08.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-35-5106 COATING WITH PUR-BASED TOP

COAT A400M SP-TA 15.08.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-35-5254 COATING W ITH PUR-BASED

VARNISH, ABRASIONRESISTANT A400M SP-TA 15.08.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-35-9120 COATING WITH PAINTS AND

VARNISHES, GENERAL A400M SP-TA 15.08.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-35-9127 AIRCRAFT EXTERIOR PAINT

SYSTEM APPLICATION A400M SP-TA 15.08.2016 N/A


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0030

PROCESS AND QUALITY CONTROL OF GLASS/EPOXY COMPOSITE CURED AT INTERMEDIATE TEMPERATURE 127°C

KUH/KAI SP-TA 19.08.2016 N/A

CLEAN ROOM #1 20X20 MAN.DATE:2013 AUTOCLAVE #1 MAROSO MAN.DATE 2012 3X6M NO:NC-PR00001 SERI NO:RG469


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88MP0031

PROCESS AND QUALITY CONTROL OF CARBON/EPOXY COMPOSITE CURED AT HIGH TEMPERATURE 177°C

KUH/KAI SP-TA 19.08.2016 N/A

CLEAN ROOM #1 20X20 MAN.DATE:2013 AUTOCLAVE #1 MAROSO MAN.DATE 2012 3X6M NO:NC-PR00001 SERI NO:RG469


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE I+D-P-233

MANUFACTURING OF CARBON FIBER COMPOSITE MATERIALS (LAMINATE MANUFACTURING ONLY)

A400M SP-TA 19.08.2016 N/A

LAMINATE MANUFACTURING ONLY CLEAN ROOM #1 20X20 MAN.DATE:2013 AUTOCLAVE #1 MAROSO MAN.DATE 2012 3X6M NO:NC-PR00001 SERI NO:RG469

11/15/2017 9:14:34 AM10 / 32



ISSUE DATE

APPROVAL DUE DATE



Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE TPS-740

RESIN IMPREGNATED GLASS, CARBON AND ARAMID FIBER REINFORCED COMPOSITE PARTS (LAMINATE MANUFACTURING ONLY)

TAI PROGRAMS SP-TA 19.08.2016 N/A

LAMINATE MANUFACTURING ONLY CLEAN ROOM #1 20X20 MAN.DATE:2013 AUTOCLAVE #1 MAROSO MAN.DATE 2012 3X6M NO:NC-PR00001 SERI NO:RG469


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE AITM 6-4005

ULTRASONIC PULSE-ECHO INSPECTION OF CARBON FIBRE PLASTICS

A400M SP-TA 27.05.2017 N/A

ONE MANUAL PULSE-ECHO EQUIPMENT IS APPROVED WITH THIS SQCS. SYSTEM DESCRIPTION: OMNISCAN SXOMNISCAN SX S/N: QC-005698


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE AITM 6-4002

ULTRASONIC THROUGH TRANSMISSION INSPECTION OF FIBRE PLASTICS

A400M SP-TA 24.02.2017 N/A

ONE THROUGH TRANSMISSION SYSTEM WITH 5 MHZ FREQUENCY IS APPROVED WITH THIS SQCS. SYSTEM DESCRIPTION: MARIETTA FMS 10PULSER-RECEIVER : OLYMPUS MS5800 PULSER-RECEIVER S/N: NC-PR00002: 0001, NC-PR00217: 937139


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-30-0032 MACHINING OF FRP COMPONENTS A400M SP-TA 11.03.2016 N/A

ONLY HAND ROUTING, TRIMMING AND PILOT HOLE DRILLING


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE 80-T-39-0132 MARKING WITH INDELIBLE INK A400M UNSP-TA 09.03.2016 N/A ONLY MARKING BY

HAND


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE TPS-702 COMPOSITE MACHINIG TAI


REQ_001_16ONLY HAND ROUTING, TRIMMING AND DRILLING.


Başkent OSB, Başkent Bulvarı, No:91 Maliköy-Temelli Ankara TÜRKİYE A88TM1269

CUTOUT FOR ELECTRICAL CONNECTOR, BACK PANEL MOUNTING

KUH/KAI UNSP-TA 11.08.2015 N/A SPAR-17453-19-15

21680FIRTH RIXSON FORGINGS LTD- MEADOWHALL-ALCOA FORGINGS & EXTRUSIONS

MEADOWHALL WORKS MEADOW ROAD WINCOBANK Sheffield UNITED

KINGDOM AMS 2801 HEAT TREATMENT OF TITANIUM ALLOY PARTS

TLUH (ÖZGÜN HELİKOPTER) SP-TA 04.10.2017 N/A 21680-17-PCA002



KINGDOM AMS 2759/1

HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL PARTS MINIMUM TENSILE STRENGTH BELOW 220 KSI (1517 MPA)




KINGDOM AMS 2759/7CARBURIZING AND HEAT TREATMENT OF CARBURIZING GRADE STEEL PARTS




KINGDOM AMS 2759/11 STRESS RELIEF OF STEEL PARTS TAI PROGRAMS SP-TA 11.05.2017 N/A 21680-17-PCA001



KINGDOM ASTM E1444 STANDARD PRACTICE FOR MAGNETIC PARTICLE TESTING


11/15/2017 9:14:34 AM11 / 32



ISSUE DATE

APPROVAL DUE DATE


21681FIRTH RIXSON FORGINGS LTD-RIVER DON-ALCOA FORGINGS & EXTRUSIONS

RIVER DON WORKS MILFORD STREET Sheffield UNITED KINGDOM AMS 2801 HEAT TREATMENT OF TITANIUM

ALLOY PARTSTLUH (ÖZGÜN HELİKOPTER) SP-TA 04.10.2017 N/A 21681-17-PCA002


RIVER DON WORKS MILFORD STREET Sheffield UNITED KINGDOM AMS 2759/1

HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL PARTS MINIMUM TENSILE STRENGTH BELOW 220 KSI (1517 MPA)



RIVER DON WORKS MILFORD STREET Sheffield UNITED KINGDOM AMS 2759/7

CARBURIZING AND HEAT TREATMENT OF CARBURIZING GRADE STEEL PARTS



RIVER DON WORKS MILFORD STREET Sheffield UNITED KINGDOM AMS 2759/11 STRESS RELIEF OF STEEL PARTS TAI

PROGRAMS SP-TA 11.05.2017 N/A 21681-17-PCA001

13520 GAGE OTOMOTIV SAN. VE TIC. LTD. STI.

Sanayi Cad. No:75 Armutlu Org. San. Böl. Armutlu- Kemalpaşa/IZMIR İzmir TÜRKİYE 80-T-30-9910


A400M, AIRBUS SEC-19

SP-TA 01.12.2015 N/A

13273 GORA MAKİNA SAN. VE TİC. LTD. ŞTİ.Saray Mah. 128. Cd. No:14/1-2 Kahramankazan Ankara TÜRKİYE 80-T-30-9910


AIRBUS SEC-19 SP-TA 25.11.2015 N/A

9889 GÜR METAL HASSAS DÖKÜM SAN. VE TİC. A.Ş.Orhanlı Merkez Mah. Dostane Sok. No: 21 Orhanlı/Tuzla İstanbul TÜRKİYE BSS 7041 RADIOLOGIC

INSPECTION,RADIOGRAPHY (FILM) BOEING SP-TCA 24.12.2016 N/A 9889-16-PCA004

9889 GÜR METAL HASSAS DÖKÜM SAN. VE TİC. A.Ş.Orhanlı Merkez Mah. Dostane Sok. No: 21 Orhanlı/Tuzla İstanbul TÜRKİYE BAC 5423, BSS 7039 LIQUID PENETRANT INSPECTION BOEING SP-TCA 06.09.2012 N/A SPAR-9889-11-12

9889 GÜR METAL HASSAS DÖKÜM SAN. VE TİC. A.Ş.Orhanlı Merkez Mah. Dostane Sok. No: 21 Orhanlı/Tuzla İstanbul TÜRKİYE BAC5423, BSS7039 LIQUID PENETRANT INSPECTION BOEING SP-TCA 06.09.2012 N/A SPAR-9889-11-12

9889 GÜR METAL HASSAS DÖKÜM SAN. VE TİC. A.Ş.Orhanlı Merkez Mah. Dostane Sok. No: 21 Orhanlı/Tuzla İstanbul TÜRKİYE BAC 5602, AMS 2771 HEAT TREATMENT OF ALUMINUM

ALLOYS BOEING SP-TCA 06.09.2012 N/A SPAR-9889-13-13, SPAR-9889-14-13

9889 GÜR METAL HASSAS DÖKÜM SAN. VE TİC. A.Ş.Orhanlı Merkez Mah. Dostane Sok. No: 21 Orhanlı/Tuzla İstanbul TÜRKİYE BAC 5602, AMS 2771 HEAT TREATMENT OF ALUMINUM

ALLOYS BOEING SP-TCA 01.07.2013 N/A SPAR-9889-13-13, SPAR-9889-14-13

13613 HEZARFEN SAVUNMA SAN. HAV. MAK. İNŞ. OTO. SAN. TİC. LTD. ŞTİ

Dempa Sanayi Sitesi Dempa Cad. No:11 Susuz/Y.Mahalle/ANKARA Ankara TÜRKİYE BAC 5004, BAC5004-

1, BAC5004-2BAC INSTALLATION OF PERMANENT FASTENERS BOEING UNSP-TA 18.07.2013 N/A


Dempa Sanayi Sitesi Dempa Cad. No:11 Susuz/Y.Mahalle/ANKARA Ankara TÜRKİYE BAC 5117& BAC5117

-7 ELECTRICAL BONDING BOEING UNSP-TA 18.07.2013 N/A


Dempa Sanayi Sitesi Dempa Cad. No:11 Susuz/Y.Mahalle/ANKARA Ankara TÜRKİYE BAC 5000 GENERAL SEALING BOEING UNSP-TA 07.09.2012 N/A


Dempa Sanayi Sitesi Dempa Cad. No:11 Susuz/Y.Mahalle/ANKARA Ankara TÜRKİYE BAC 5010 APPLICATION OF ADHESIVES BOEING UNSP-TA 12.09.2012 N/A


Dempa Sanayi Sitesi Dempa Cad. No:11 Susuz/Y.Mahalle/ANKARA Ankara TÜRKİYE BAC 5117 ELECTRICAL BONDING BOEING UNSP-TA 14.11.2014 N/A SPAR 13613-11-14


Dempa Sanayi Sitesi Dempa Cad. No:11 Susuz/Y.Mahalle/ANKARA Ankara TÜRKİYE BAC 5004 INSTALLATION OF PERMANENT

FASTENERS BOEING UNSP-TA 14.11.2014 N/A SPAR-13613-11-14

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE BAC5000 GENERAL SEALING BOEING UNSP-TA 16.08.2016 N/A

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE BAC-5010 APPLICATION OF ADHESIVES BOEING UNSP-TA 16.08.2016 N/A

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-30-9910


A400M SP-TA 01.12.2015 N/A

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-30-6918 FINISHING OF METAL COMPONENTS

(DEBURRING, CLEANING) A400M UNSP-TCA 17.06.2016 N/A

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-39-0132 MARKING WITH INDELIBLE INK AIRBUS SEC-

19 UNSP-TCA 17.06.2016 N/A

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE AITM6-6004

DETERMINATION OF ELECTRICAL CONDUCTIVITY OF ALUMINIUM ALLOYS BY EDDY CURRENT METHOD

A400M SP-TCA 17.06.2016 N/A

11/15/2017 9:14:34 AM12 / 32



ISSUE DATE

APPROVAL DUE DATE


3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-35-0014 CLEANING WITH ORGANIC

SOLVENTS A400M UNSP-TCA 17.06.2016 N/A

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC


3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE BAPS 160-036 ELECTROLYTIC POLISHING BOMBARDIER SP-TA 02.06.2014 N/A

APPROVED DEVIATIONS: 2014/1(17058) & 2014/2 (17057)

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE AITM 6-1001 PENETRANT ISNPECTION A400M SP-TCA 07.08.2017 N/A

METHOD A WASHABLE PENETRANT SYSTEM

3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-30-9910




3323 HMS MAKİNA SANAYİ VE TİCARET A.Ş.Ahmet Nazif Zorlu Bulvarı No:7 MOSB IV. KISIM, MOSB MERKEZ Manisa TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC

COMPONENTSAIRBUS SEC-19 UNSP-TCA 17.06.2016 N/A RELATED PFA: PFA

TAI-S19-006

5069 IMSAN MAKINA MUH. SAN. VE TIC. LTD. STI.

İvedik OSB. Öz Anadolu San Sit.1466. SOK. NO:14-16 İVOĞSAN / Y.MAHALLE / ANKARA

Ankara TÜRKİYE 80-T-30-9910DRILLING,REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 19.10.2015 N/A

7947 KALE HAVACILIK SANAYİ A.Ş. Aydınlı Serbest Bölge Mahallesi 6.Sokak No:5 Tuzla-İstanbul 34957 İstanbul TÜRKİYE MIL-DTL-5541

CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS

JSF-CENTER FUSELAGE SP-TCA 26.05.2017 N/A CLASS 1A & CLASS 3

7947 KALE HAVACILIK SANAYİ A.Ş. Aydınlı Serbest Bölge Mahallesi 6.Sokak No:5 Tuzla-İstanbul 34957 İstanbul TÜRKİYE BAC 5730 SHOT PEEN BOEING SP-TCA 11.03.2009 N/A

EKIPMAN: SISSON LEHMAN MP 1500 TLBILYE: S230 STEEL SHOT- WHEELLABORATORALMEN ÖLÇÜM EKIPMANI: ELEETRONIES INE. TSP-3BALMEN : PEENING AEEESSORIESELEK TEST CIHAZI: RO-TAP RX-29-10HF

7947 KALE HAVACILIK SANAYİ A.Ş. Aydınlı Serbest Bölge Mahallesi 6.Sokak No:5 Tuzla-İstanbul 34957 İstanbul TÜRKİYE LMA-PG001

REQUIREMENTS FOR ETCH / CLEANING PRIOR TO PENETRANT INSPECTION

JSF-CENTER FUSELAGE SP-TCA 26.05.2017 N/A FOR ALUMINIUM

PARTS

7947 KALE HAVACILIK SANAYİ A.Ş. Aydınlı Serbest Bölge Mahallesi 6.Sokak No:5 Tuzla-İstanbul 34957 İstanbul TÜRKİYE LMA PC201



METHOD A WATER WASHABLE SYSTEMSALUMINUM PARTS

7947 KALE HAVACILIK SANAYİ A.Ş. Aydınlı Serbest Bölge Mahallesi 6.Sokak No:5 Tuzla-İstanbul 34957 İstanbul TÜRKİYE MIL-A-8625 ANODIC COATINGS FOR ALUMINUM

AND ALUMINUM ALLOYSJSF-CENTER FUSELAGE SP-TCA 26.05.2017 N/A TYPE IB

12049KAYMAZLAR SAVUNMA VE HAVACILIK MAKİNA SAN.VE TİC. LTD. ŞTİ.

UZAYÇAĞI CAD. 1157. SOK. NO:19 OSTİMYENİMAHALLE Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 25.11.2015 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE BAC 5004, BAC 5004

-1, BAC 5004-2INSTALLATION OF PERMANENT FASTENERS BOEING UNSP-TA 18.07.2013 N/A

11/15/2017 9:14:34 AM13 / 32



ISSUE DATE

APPROVAL DUE DATE


2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE

BAC 5117, BAC 5117-2, BAC 5117-7, BAC 5117-8

ELECTRICAL BONDING BOEING UNSP-TA 18.07.2013 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE BAC 5004, BAC 5004

-1INSTALLATION OF PERMANENT FASTENERS BOEING UNSP-TA 26.12.2014 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE

BAC 5117, BAC 5117-2, BAC 5117-3, BAC 5117-7, BAC 5117-8

ELECTRICAL BONDING BOEING UNSP-TA 26.12.2014 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE BAC 5435 BEARING INSTALLATION AND

RETENTION BOEING UNSP-TA 26.12.2014 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE BAC 5619 HEAT TREAT OF CORROSION

RESISTANT STEELS BOEING SP-TCA 14.04.2015 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE BAC 5000 GENERAL SEALING BOEING UNSP-TA 09.10.2012 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE BAC-5010 APPLICATION OF ADHESIVES BOEING UNSP-TA 09.10.2012 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.11.2015 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE 80-T-30-6918 FINISHING OF METAL COMPONENTS

(DEBURRING,CLEANING)AIRBUS SEC-19 UNSP-TCA 22.06.2016 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE 80-T-39-0132 MARKING WITH INDELIBLE INK AIRBUS SEC-

19 UNSP-TCA 22.06.2016 N/A

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE AITM6-6004



2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE 80-T-35-0014 CLEANING WITH ORGANIC


2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC

COMPONENTS AIRBUS SEC-19 UNSP-TCA 25.10.2016 N/A 2982-16-PCA001

2982 KÜÇÜKPAZARLI KARDEŞLER KALIP VE MAKİNE SAN. LTD. ŞTİ.Sincan OSB. Avar Caddesi No: 18 Ankara TÜRKİYE 80-T-30-9910




11/15/2017 9:14:34 AM14 / 32



ISSUE DATE

APPROVAL DUE DATE


7327 ME-GE TEKNİK ELEKTRONİK SAN.VE TİC. A.Ş.Ergazi Mah. Sok. 1819. SK.No:1 Kat: 4 Ergazi Batıkent Ankara TÜRKİYE

AIPS 07-01-001 AIPS 07-01-003 AIPS 07-01-005 AIPS 07-01-007 AIPS 07-01-009 AIPS 07-02-001 AIPS 07-02-009 AIPS 07-03-001 AIPS 07-04-010 AIPS 07-04-028 AIPS 07-04-031 AIPS 07-05-004 AIPS 07-05-005 AIPS 07-05-041 AIPS 07-05-043 AIPS 07-05-047 AIPS 07-05-050 AIPS 07-05-062 AIPS 07-06-001 AIPS 07-06-002 AIPS 07-06-004 AIPS 07-07-002

A400M SP-CA 01.05.2009 N/A

7327 ME-GE TEKNİK ELEKTRONİK SAN.VE TİC. A.Ş.Ergazi Mah. Sok. 1819. SK.No:1 Kat: 4 Ergazi Batıkent Ankara TÜRKİYE AIPS 07-01-013 /

AIPI 07-01-013

SHIELDED OVERBRAIDING OF HARNESS DEVELOPED SICE A380 PROGRAM AND FOR SUBSEQUENT PROGRAMS / MANUFACTURE OF OVERBRAIDED HARNESSES

A400M SP-TCA 14.05.2014 N/A -

6311 MED MAKINA MEDIKAL MUHENDISLIK TIC.LTD.STI.

1235. Sokak (Eski 58. Sokak) No:139-141-143 Ostim, Ankara, TURKEY Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

1880 MIKRON MAKINA SAN.VE TIC. LTD.IVEDIK OSB AĞAÇİŞLERİ SAN. SİT.1372.SOK NO:31 OSTİM YANİMAHALLE

Ankara TÜRKİYE 80-T-30-9910DRILLING,REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 19.10.2015 N/A

4292 MİKRON MÜHENDİSLİK LTD. ŞTİ.İVEDİK ORGANİZE SANAYİ BÖL.AĞAÇİŞLERİ SANAYİ SİT. 1376. SK. NO:28

Ankara TÜRKİYE SAE AMS 2403 NICKEL PLATING ATAK, TAI PROGRAMS SP-TA 10.07.2012 N/A ONLY FOR COPPER

PARTS


Ankara TÜRKİYE SS-8693 BRUSH COATING AND TOUCH UP OF ALUMINUM AND ALUMINUM ALLOY SURFACE TREATMENTS


UNSP-TA 26.10.2017 N/A


Ankara TÜRKİYE SS-8486 CHEMICAL SURFACE TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS


UNSP-TA 26.10.2017 N/A

BONDERITE M-CR 1200S AERO IS APPROVED CHEMICAL FOR CLASS 1A AND BONDERITE M-CR 600 AERO IS APPROVED CHEMICAL FOR CLASS 3 PROCESS.


Ankara TÜRKİYE MIL-A-8625 TV III CLASS I HARD ANODIC COATING TAI



Ankara TÜRKİYE I+D-P-072 CLEANING AND PICKLING OF ALUMINUM AND ITS ALLOYS



Ankara TÜRKİYE BAC 5821 CLASS 1,2,3 HARD ANODIZING BOEING SP-TCA 01.10.2009 N/A


Ankara TÜRKİYE SAE AMS 2700 PASSIVATION OF CORROSION RESISTANT STEEL KUH SP-TCA 06.11.2013 N/A


Ankara TÜRKİYE SAE AMS 2401 PLATING CADMIUM LOW HYDROGEN CONTENT DEPOSIT KUH SP-TCA 15.01.2014 N/A

11/15/2017 9:14:34 AM15 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE BAC 5637 ZINC NICKEL ALLOY PLATING BOEING SP-TCA 07.10.2009 N/A


Ankara TÜRKİYE A88MP0011 APPLICATION OF SOLID FILM LUBRICANT KUH/KAI SP-TCA 02.10.2015 N/A


Ankara TÜRKİYE EI045-35-9120 COATING WITH PAINTS, GENERAL EUROCOPTER SP-TCA 02.10.2015 N/A


Ankara TÜRKİYE EI045-35-5023COATING WITH TWO COMPONENT EP-BASED PRIMER, CHROMATE FREE

EUROCOPTER SP-TCA 02.10.2015 N/A


Ankara TÜRKİYE BAC 5736 BAC 5845 BAC 5882

APPLICATION OF CHEMICAL AND SOLVENT RESISTANT FINISHES , APPLICATION OF POLYURETHANE TOPCOAT, APPLICATION OF URETHANE COMPATIBLE PRIMER



Ankara TÜRKİYE MIL-DTL-5541 CHEMICAL CONVERSION COATING ALODINE 600 SIKORSKY SP-TCA 08.10.2009 N/A


Ankara TÜRKİYE BAC 5736 BAC 5845 BAC 5882

APPLICATION OF CHEMICAL AND SOLVENT RESISTANT FINISHES APPLICATION OF POLYURETHANE ENAMEL APPLICATION OF URETHANE COMPATIBLE PRIMER

BOEING UNSP-TA 20.10.2009 N/A


Ankara TÜRKİYE TPS 220 CADMIUM PLATING TAI PROGRAMS SP-TA 20.11.2009 N/A


Ankara TÜRKİYE TPS 250, TPS 260 PRIMER APPLICATION, PAINT APPLICATION GENERAL



Ankara TÜRKİYE BAC 5861 PHOSPHATE FLUORIDE COATINGS ON TITANIUM ALLOYS BOEING SP-TCA 25.12.2009 N/A


Ankara TÜRKİYE SS-8521 GENERAL SPECIFICATION FOR ORGANIC FINISHES SIKORSKY UNSP-TA 24.05.2016 N/A


Ankara TÜRKİYE TPS 225 HARD CHROME PLATING TAI PROGRAMS SP-TA 23.01.2010 N/A


Ankara TÜRKİYE SAE AMS 2411 SILVER PLATING TAI PROGRAMS SP-TA 29.01.2010 N/A


Ankara TÜRKİYE TPS 215 PASSIVATION OF CRES TAI PROGRAMS SP-TA 22.02.2010 N/A


Ankara TÜRKİYE TPS 210 CHEMICAL CONVERSION COATING TAI PROGRAMS SP-TA 23.03.2010 N/A


Ankara TÜRKİYE BAC 5722 COPPER PLATING BOEING SP-TCA 25.05.2010 N/A


Ankara TÜRKİYE TPS 211 CHROMIC ACID ANODIZE TREATMENT



Ankara TÜRKİYE I+D-P 47 CHEMICAL NICKEL PLATING CASA SP-TCA 15.10.2010 N/A

11/15/2017 9:14:34 AM16 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE I+D-P 115 ELECTROLYTIC CADMIUM PLATING CASA SP-TCA 15.10.2010 N/A


Ankara TÜRKİYE I+D-P 151 ELECTROLYTIC SILVER PLATING CASA SP-TCA 15.10.2010 N/A


Ankara TÜRKİYE I+D-P 47 CHEMICAL NICKEL PLATING A400M, TAI PROGRAMS SP-TA 25.05.2010 N/A


Ankara TÜRKİYE I+D-P-047 CHEMICAL NICKEL COATING AIRBUS SEC-18 SP-TCA 11.09.2011 N/A


Ankara TÜRKİYE TPS 222 CHEMICAL NICKEL PLATING TAI PROGRAMS SP-TA 01.08.2015 N/A


Ankara TÜRKİYE I+D-P-90 CLEANING AND PICKLING OF TITANIUM AND ITS ALLOYS



Ankara TÜRKİYE AIPI 02-01-004 / AIPS 02-01-004

ANODIZING OF TITANIUM AND TITANIUM ALLOYS A400M SP-TA 25.11.2011 N/A


Ankara TÜRKİYE I+D-P-115 ELECTROLITIC CADMIUM PLATING AIRBUS SEC-18 SP-TCA 24.04.2012 N/A


Ankara TÜRKİYE SAE AMS QQ-P-416 ELECTROLYTIC CADMIUM PLATING MELTEM II SP-TCA 28.02.2012 N/A


Ankara TÜRKİYE SAE AMS QQ-P-416 CADMIUM PLATING TAI PROGRAMS SP-TA 24.04.2012 N/A


Ankara TÜRKİYE I+D-P 202 CHEMICAL CONVERSION FILMS ON ALUMINIUM AND ITS ALLOYS



Ankara TÜRKİYE SAE AMS 2417, SS 9213

ELECTROLYTIC ZINC NICKEL PLATING SIKORSKY SP-TCA 26.11.2012 N/A


Ankara TÜRKİYE TPS 121 DRY BLASTING TAI PROGRAMS UNSP-TA 09.01.2013 N/A


Ankara TÜRKİYEI+D-P-060/ I+D-P-064 (AIPS 05-01-001/AIPS05-02-003/AIPS05-02-009)

PAINT (GENERAL SPECIFICATION) / PAINT SYSTEMS FOR METALLIC DETAIL PARTS AND ASSEMBLIES



Ankara TÜRKİYE AMS-QQ-P-416 PLATING, CADMIUM (ELECTRODEPOSITED)



Ankara TÜRKİYE AMS 2460, AMS-QQ-C-320

CHROMIUM PLATING (ELECTRODEPOSITED)



Ankara TÜRKİYE MIL-A-8625TYPE III ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (HARD ANODIZING)



Ankara TÜRKİYE BAC 5423 PENETRANT INSPECTION BOEING SP-CA 26.11.2009 N/A


Ankara TÜRKİYE BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BOMBARDIER SP-CA 11.11.2013 N/A

11/15/2017 9:14:34 AM17 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE BAPS 180-001 ALKALINE CLEANING BOMBARDIER SP-CA 03.08.2015 N/A


Ankara TÜRKİYE BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS BOMBARDIER SP-CA 03.08.2015 N/A


Ankara TÜRKİYE BAPS 168-06 BAKING OF STEEL FOR RELIEF OF HYDROGEN EMBRITTLEMENT BOMBARDIER SP-CA 03.08.2015 N/A


Ankara TÜRKİYE BAPS 168-15 STRESS RELIEF OF METALS BOMBARDIER SP-CA 03.08.2015 N/A


Ankara TÜRKİYE EI045-35-3000 GALVANIC CADMIUM PLATING OF STEELS AND COPPER ALLOYS

AIRBUS HELICOPTER SP-TCA 26.05.2017 N/A


Ankara TÜRKİYE ASTM B 700 ELECTRODEPOSITED SILVER PLATING ATAK SP-TA 04.03.2016 N/A


Ankara TÜRKİYE LMA-PJ264 APPLICATION AND CONTROL OF ORGANIC FINISHES



Ankara TÜRKİYE ASTM B 117 SALT SPRAY TESTING JSF-CENTER FUSELAGE SP-TCA 15.08.2016 N/A


Ankara TÜRKİYE TPS-114 PICKLING OF STAINLESS STEEL PRIOR TO BONDING

TAI PROGRAMS UNSP-TA 04.12.2016 N/A


Ankara TÜRKİYE SS 8483 TYPE ID & MIL-A-8625

TARTARIC SULPHURIC ACID ANODIZING


SP-TCA 17.07.2017 N/A


Ankara TÜRKİYE SS 8483 TYPE IC & MIL-A-8625 BORIC-SULPHURIC ACID ANODIZING


SP-TCA 17.07.2017 N/A


Ankara TÜRKİYE SS-8435 PASSIVATION OF CORROSION RESISTANT STEEL


UNSP-TA 31.07.2017 N/A


Ankara TÜRKİYE BAPS 180-032 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS BOMBARDIER SP-CA 26.05.2017 N/A


Ankara TÜRKİYE BAPS 180-030 ALKALINE ETCHING FOR ALUMINIUM ALLOYS BOMBARDIER SP-CA 26.05.2017 N/A


Ankara TÜRKİYE BAPS 180-008 DRY ABRASIVE BLASTING BOMBARDIER UNSP-CA 25.05.2017 N/A


Ankara TÜRKİYE BAPS 180-001 ALKALINE CLEANING BOMBARDIER SP-CA 26.05.2017 N/A


Ankara TÜRKİYE BAPS 180-009 MANUAL SOLVENT CLEANING BOMBARDIER UNSP-CA 26.05.2017 N/A


Ankara TÜRKİYE BAERDGEN-018-1B SOLUTION TREATMENT AND WATER BOMBARDIER UNSP-CA 26.05.2017 N/A

11/15/2017 9:14:34 AM18 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE AMS 2438 PLATING CHROMIUM THIN, HARD,DENSE DEPOSIT



Ankara TÜRKİYE TPS 216 PHOSPHATE TREATMENT TAI PROGRAMS SP-TA 20.04.2015 N/A

(TYPE Z) ONLY ZINC PHOSPHATE TREATMENT


Ankara TÜRKİYE I+D-P-107 FATIGUE PREVENTION BY MEANS OF WET BLAST TFCH

AIRBUS SEC-18 SP-TCA 28.06.2017 N/A ALUMINIUM ALLOY

PARTS ONLY





APPROVE INCLUDES PROCESSING CRITICAL PARTS, BUT IS LIMITED TO THE FOLLOWING PERSONNEL:

HUSEYIN NUMAN ..STAMP # PT02 UĞUR

ELMACIOGLU STAMP # PT01

SEYIT MURAT KARACA .STAMP # PT04


Ankara TÜRKİYE BAPS 160-034 ZINC NICKEL ALLOY PLATING BOMBARDIER SP-TCA 19.10.2012 N/AAPPROVED DEVIATIONS: 2012/1, 2, 3, 7


Ankara TÜRKİYE BAPS 160-040CONDUCTIVE CHEMICAL TREATMENT FOR ALUMINUM ALLOYS

BOMBARDIER SP-TCA 20.11.2012 N/A APPROVED DEVIATNS 2012/5, 6, 8


Ankara TÜRKİYE EI045-35-0200 ABRASIVE BLASTING - CLEANING EUROCOPTER SP-CA 30.12.2015 N/A

APPROVED PERMIT FOR ALTERNATIVE (PFA-MIK-0002)


Ankara TÜRKİYE BAC 5019 MIL-A-8625 CHROMIC ACID ANODIZING BOEING SP-TCA 24.05.2017 N/A

BAC 5019 CLASS 1,3,4,5 / MIL-A-8625 TYPE1


Ankara TÜRKİYE BAC 5701 / SAE AMS QQ-P-416 CADMIUM PLATING BOEING SP-TCA 07.10.2009 N/A BAC 5701: TYPE I,II,III


Ankara TÜRKİYE BAC-5710 APPLICATION OF SPECIAL PURPOSE COATINGS BOEING UNSP-TA 24.05.2016 N/A BAC-5710 TYPE 27


Ankara TÜRKİYE SS8448, SS8407, SAE AMS QQ-P-416 CADMIUM PLATING (CD1) SIKORSKY SP-TCA 24.05.2017 N/A CD1: TYPE 1,2 &

CLASS 1,2


Ankara TÜRKİYE SS8483, MIL-A-8625 TYPE III HARD ANODIZE PROCESS SIKORSKY SP-TCA 24.05.2017 N/A CLASS 1


Ankara TÜRKİYE BAC 5632 BORIC ACID SULPHURIC ACID ANODIZING BOEING SP-TCA 24.05.2017 N/A CLASS 1 & 5


Ankara TÜRKİYE SAE AMS-C-26074 ELECTROLESS NICKEL COATING LOCKHEED MARTIN SP-TCA 12.04.2012 N/A CLASS I AND CLASS

II


Ankara TÜRKİYE BAC 5734 ANODIZING MAGNESIUM ALLOYS BOEING SP-TCA 24.05.2017 N/A DOW 17 PROCESS

11/15/2017 9:14:34 AM19 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE EI045 80-E-36-3300 DEHYDROGENATION OF STEEL AIRBUS HELICOPTER SP-TCA 26.05.2017 N/A

EI045 80-E-36-3300 CAN BE USED ONLY WITH EI045-35-3000 CADMIUM PLATING


Ankara TÜRKİYE EI045-35-1107 CHROMIUM PASSIVATION OF CADMIUM PLATED SURFACES

AIRBUS HELICOPTER SP-TCA 26.05.2017 N/A

EI045-35-1107 CAN BE USED ONLY WITH EI045-35-3000 CADMIUM PLATING


Ankara TÜRKİYEMP 62.51.13 IGC 04.74.110 IF-MA NO.865

SULPHURIC ACID ANODIZING OF TITANIUM ALLOYS

EUROCOPTER SP-TCA 05.12.2014 N/A FOR SECONDARY

PARTS


Ankara TÜRKİYE IFMA 153 SULPHAMATE NICKEL PLATING EUROCOPTER SP-CA 24.05.2017 N/A

IFMA 153 CAN BE USED ONLY FOR IFMA 817 CADMIUM PLATING PROCESS. SAFETY CLASSES IMPORTANT (1B) AND SECONDARY (2 AND 3)


Ankara TÜRKİYE IFMA 232 STRESS RELIEF AND DE-EMBRITTLEMENT OF STEEL PARTS

EUROCOPTER SP-CA 24.05.2017 N/A



Ankara TÜRKİYE IFMA 374 ELECTROLYTIC DEGREASING OF STEEL PARTS




Ankara TÜRKİYE IFMA 803 BLASTING OF METALLIC MATERIALS EUROCOPTER SP-CA 24.05.2017 N/A



Ankara TÜRKİYE IFMA 816DEMETALLISATION OF ALUMINIUM, TITANIUM AND MAGNESIUM ALLOY PARTS


IFMA 816 CAN BE USED ONLY FOR IFMA 865 TITANIUM SULPHURIC ACID ANODIZE PROCESS. SAFETY CLASSES IMPORTANT (1B) AND SECONDARY (2 AND 3)


Ankara TÜRKİYE IFMA 832 GENERAL PREPARATION OF TITANIUM SURFACES


IFMA 832 CAN BE USED ONLY FOR IFMA 865 TITANIUM SULPHURIC ACID ANODIZE PROCESS. SAFETY CLASSES IMPORTANT (1B) AND SECONDARY (2 AND 3)

11/15/2017 9:14:34 AM20 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE IFMA 839 STRIPPING PROCESSES FOR STEEL METALS




Ankara TÜRKİYE BAC 5626 COLORED CONVERSION COATINGS FOR ALUMINIUM BOEING SP-TCA 03.06.2015 N/A IMMERSION

APPLICATION ONLY


Ankara TÜRKİYE BAC 5719, MIL-C-5541

CHEMICAL CONVERSION COATING ON ALUMINUM BOEING SP-TCA 01.10.2009 N/A IMMERSION ONLY


Ankara TÜRKİYE LMA-PG001REQUIREMENTS FOR ETCH/CLEANING PRIOR TO PENETRANT INSPECTION


LIMITATION: CONDITIONALLY APPROVED TO ETCH THE FOLLOWING ALLOY GROUPS; CORROSION RESISTANT STEELS, TITANIUM AND NICKEL BASED ALLOYS AS DEFINED IN LMA-PG001. FINAL APPROVAL PENDING ACCEPTANCE OF ADDITIONAL INFORMATION REQUESTED BY NGC M&P ENGINEERING.


Ankara TÜRKİYE LMA-PG001REQUIRMENTS FOR ETCH/ CLEANING PRIOR TO PENETRANT INSPECTION


LIMITED TO ALUMINUM ALLOY ONY


Ankara TÜRKİYE SS-8806 PRE-PENETRANT ETCH


UNSP-TCA 03.08.2017 N/A

LIMITED TO ALUMINUM ALLOYS, APPROVED PROCESS STANDARTS CEP01 REVISION C & CEP-TP 01 REVISION A


Ankara TÜRKİYE MIL-C-5541CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS

JSF-CENTER FUSELAGE SP-TCA 15.08.2016 N/A LIMITED TO CLASS 3

AND CLASS 1A


Ankara TÜRKİYE AIPS 02-01-003, AIPI 02-01-003

TARTARIC SULPHURIC ANODIZING OF ALUMINIUM ALLOYS (TSA) A350 SP-TCA 04.07.2013 N/A

LIMITED TO EXTENDED WORKBENCH ACTIVITIES FOR METALIC PARTS A350XWB AILERONS


Ankara TÜRKİYE AIPS 05-02-003 APPLICATION OF EXTERNAL PAINT SYSTEMS A350 SP-TCA 04.07.2013 N/A



Ankara TÜRKİYE AIPS 05-02-009 APPLICATION OF STRUCTURAL PAINTS A350 SP-TCA 04.07.2013 N/A


11/15/2017 9:14:34 AM21 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE AIPS 02-04-006

ELECTROLYTIC ZINC-NICKEL PLATING (LIMITED TO EXTENDED WORKBENCH ACTIVITIES FOR METALLIC PARTS A350XWB AILERONS)

A350 SP-TCA 03.07.2013 N/A

LIMITED TO EXTENDED WORKBENCH ACTIVITIES FOR METALLIC PARTS A350XWB AILERONS


Ankara TÜRKİYE AIPS 02-05-001 / AIPI 02-05-001 CHEMICAL CONVERSION COATING A350 SP-TCA 03.07.2013 N/A

LIMITED TO EXTENDED WORKBENCH ACTIVITIES FOR METALLIC PARTS A350XWB AILERONS


Ankara TÜRKİYE AIPI 02-05-005 PASSIVATION OF CORROSION RESISTANT STEEL A350 SP-TCA 17.02.2015 N/A

LIMITED TO EXTENDED WORKBENCH ORDERS ONLY WITHOUT DRY BLASTING PROCESS AIPI 02-02-002


Ankara TÜRKİYE I+D-P-38

CLEANING AND PASSIVATION OF STAINLESS STEELS AND REFRACTORY NICKEL AND COBALT ALLOYS

AIRBUS SEC-18 SP-TCA 25.06.2014 N/A LIMITED TO TYPE I


Ankara TÜRKİYE MIL-A-8625 ANODIC COATING FOR ALUMINUM AND ALUMINUM ALLOYS

JSF-CENTER FUSELAGE SP-TCA 15.08.2016 N/A LIMITED TO TYPE IB


Ankara TÜRKİYE BAC 5625 SURFACE TREATMENTS FOR FERROUS ALLOYS BOEING UNSP-TA 14.12.2010 N/A METHOD 2


Ankara TÜRKİYE NTA 72270 SURFACE TREATMENT OF TITANIUM MELTEM III SP-TCA 21.06.2010 N/A METHOD 2 ONLY


Ankara TÜRKİYE TTS-100 PENETRANT INSPECTION TAI PROGRAMS SP-TA 28.06.2017 N/A

METHOD A WATER WASHABLE PENETRANT SYSTEMALUMINIUM ALLOY PARTS ONLY


Ankara TÜRKİYE I+D-E-137 AITM6-1001 PENETRANT INSPECTION PROCESS AIRBUS

PROGRAM SP-TCA 28.06.2017 N/A



Ankara TÜRKİYE I+D-E-137 AITM6-1001 QUALITY MANAGER AIRBUS

PROGRAM SP-TCA 28.06.2017 N/A



Ankara TÜRKİYE ASTM E1417, A88MP0023

STANDARD PRACTICE FOR LIQUID PENETRANT TESTING ACCEPTANCE CRITERIA FOR PENETRANT OR MAGNETIC PARTICLE INSPECTION

KUH/KAI SP-TCA 29.06.2017 N/A

METHOD A WATER WASHABLE PENETRANT SYSTEMALUMINIUM ALLOYS PARTS ONLY (FOR LIQUID PENETRANT TESTING)

11/15/2017 9:14:34 AM22 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE SS8806 PENETRANT INSPECTION SIKORSKY SP-TCA 29.06.2017 N/A






METHOD A WATER WASHABLE PENETRANT SYSTEMAPPROVAL INCLUDES PROCESSING CRITICAL PARTS, BUT IS LIMITED TO THE FOLLOWING PERSONNEL:HUSEYIN NUMAN ..STAMP # PT02UGUR ELMACIOGLU STAMP # PT01SEYIT MURAT KARACA .STAMP # PT04


Ankara TÜRKİYE MIL-A-8625 TYPE II ANODIZING AGUSTA SP-TCA 02.11.2010 N/A MIL-A-8625 TYPE II


Ankara TÜRKİYE MP 62-31-17 PRE-NICKEL PLATING OF STEELS EUROCOPTER SP-CA 24.05.2017 N/A

MP 62-31-17 CAN BE USED ONLY FOR IFMA 817 CADMIUM PLATING PROCESS. SAFETY CLASSES IMPORTANT (1B) AND SECONDARY (2 AND 3)


Ankara TÜRKİYE NTA 71151HEAT TREATMENT OF PH SERIES, 300,400 SERIES AND STAINLESS STEEL

MELTEM III SP-CA 24.05.2017 N/A

NTA 71151 CAN BE USED ONLY FOR NTA 72170 CADMIUM PLATING PROCESS AND STRESS RELIEVING UP TO 600OC ONLY FOR MELTEM III PROGRAM-ATR 72ASW


Ankara TÜRKİYE NTA 71152 HEAT TRETAMENT OF STEEL ALLOYS MELTEM III SP-CA 24.05.2017 N/A


11/15/2017 9:14:34 AM23 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE NTA 71153 DEHYDROGENATION AND STRESS RELIEVING MELTEM III SP-CA 24.05.2017 N/A



Ankara TÜRKİYE NTA 98251

CERTIFICATION AND PERIODIC INSPECTION OF FACILITY FOR HEAT TREATMENT ALLOYED STEEL,STAINLESS STEEL AND TITANIUM

MELTEM III SP-CA 24.05.2017 N/A

NTA 98251 CAN BE USED ONLY FOR NTA 72170 CADMIUM PLATING PROCESS, ONLY FOR MELTEM III PROGRAM-ATR 72ASW


Ankara TÜRKİYE BAC 5709 HARD CHROME PLATING (THIN DENSE) CLASS IV BOEING SP-TCA 22.05.2012 N/A ONLY FOR CLASS IV


Ankara TÜRKİYE NTA 73555 HARD ANODIZING MELTEM III SP-TCA 01.10.2009 N/AONLY FOR MELTEM III PROGRAM ATR 72ASW


Ankara TÜRKİYE BAC5753CLEANING, DESCALING AND SURFACE PREPARATION OF TITANIUM AND TITANIUM ALLOYS

BOEING SP-TCA 06.11.2013 N/AONLY FOR METHOD II PREPENETRANT ETCH


Ankara TÜRKİYE TPS 290 SOLID FILM LUBRICANT APPLICATION


ONLY FOR MIL-PRF-46010 TYPE I CLASS 3


Ankara TÜRKİYESTA 100-83-52 SECTION VI, METHOD II

PHOSPHATE FLUORIDE TREATMENT ATAK SP-TCA 26.05.2017 01.10.2017ONLY FOR T-129 ATAK MAIN AND TAIL ROTOR BLADES


Ankara TÜRKİYEI+D-P-213 ONLY FOR TYPE 1, 1B AND CLASS 1B

ANODIZING OF ALUMINUM AND ITS ALLOYS

AIRBUS SEC-18 SP-TCA 01.03.2013 N/A ONLY FOR TYPE 1,

1B AND CLASS 1B


Ankara TÜRKİYE

MIL-A-8625 (ONLY FOR TYPE2) SULPHURIC ACID ANODIZING OF ALUMINUM ALLOYS

ANODIC COATING FOR ALUMUNUM AND ALUMUNUM ALLOYS

TAI PROGRAMS SP-TA 28.09.2011 N/A ONLY FOR TYPE 2


Ankara TÜRKİYE BAC 5753 TYPE 2CLEANING, DESCALING AND SURFACE PREPARATION OF TITANIUM ALLOYS

BOEING SP-TCA 17.09.2010 N/A ONLY FOR TYPE II


Ankara TÜRKİYE I+D-P 213 ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS CASA SP-TCA 15.10.2010 N/A ONLY FOR TYPE II


Ankara TÜRKİYE SAE AMS QQ-P-416 CADMIUM PLATING LOCKHEED MARTIN SP-TCA 04.05.2011 N/A ONLY FOR TYPE II


Ankara TÜRKİYE MIL-A-8625 F SULPHURIC ACID ANODIZING FOR ALUMINUM

LEONARDO HELICOPTERS

SP-TCA 26.05.2017 02.11.2019 ONLY FOR TYPE II APPLICATION

11/15/2017 9:14:34 AM24 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE NTA 72170 CADMIUM PLATING-ELECTRO DEPOSITION MELTEM III SP-TCA 24.05.2017 N/A

ONLY TYPE I & TYPE II, ONLY FOR MELTEM III PROGRAM ATR 72ASW, NOT FOR COPPER ALLOYS, NTA 72252-DSP016, NTA72170-DSP013


Ankara TÜRKİYE SS 8483 & MIL-A-8625 SULPHURIC ACID ANODIZE SIKORSKY SP-TCA 27.09.2012 N/A ONLY TYPE II, CLASS

I, II


Ankara TÜRKİYE I+D-P 151, I+D-P 134 ELECTROLYTHIC SILVER PLATING MELTEM II SP-TCA 22.11.2010 N/A

PARTS ACCEPTANCE WILL BE AFTER PROCESSED PARTS QARED


Ankara TÜRKİYE AMS 2417 ZINC NICKEL PLATING TAI PROGRAMS SP-TA 18.03.2010 N/A

PROCESS IS RESTRICTED FOR PARTS REQUIRES HYDROHEN EMBRITTLEMENT OPERATION


Ankara TÜRKİYESTA 100-83-52 SECTION V METHOD I

SULPHURIC ACID PICKLING FOR 300 SERIES STAINLESS STEEL AGUSTA SP-TCA 05.08.2015 N/A

QUALIFIED PROCESS ONLY FOR AEROSTRUCTURESSTEEL SURFACE TRATMENT LINE TANKS 10,30,50 @ MIKRON


Ankara TÜRKİYE STA 100-83-87 HARD ANODIZINGLEONARDO HELICOPTERS

SP-TCA 24.05.2017 02.11.2019RFVA 07/10/160 , 7/10/161 , 7/10/162 ARE APPROVED


Ankara TÜRKİYE STA 100-80-06 CADMIUM PLATINGLEONARDO HELICOPTERS

SP-TCA 24.05.2017 03.08.2018

RFVA 7/09/122, STEEL CADMIUM PLATING CB2 AND CB3. CADMIUM +PHOSPHATE PLATING SHALL BE PROCESSED UP TP 40 HRC.


Ankara TÜRKİYE ER070-09-30 INSPECTION AND SURVEY OF SURFACE TREATMENT BATHS


SAFETY CLASSES IMPORTANT (1B) AND SECONDARY (2 AND 3)


Ankara TÜRKİYE IFMA 817 ELECTROLYTIC CADMIUM PLATING EUROCOPTER SP-TCA 24.05.2017 N/A



Ankara TÜRKİYEIFMA 863, MP 62.41.31, IGC 04.62.107

SULPHURIC ACID ANODIZING OF ALUMINUM ALLOYS




Ankara TÜRKİYE I+D-P-134, I+D-P-115

PREPARATION OF COPPER AND COPPER ALLOYS FOR SUBSEQUENT PLATING

A400M SP-TA 15.02.2015 N/A

THIS APPROVAL IS RESTRICTED FOR AL TYPES OF STEEL AND COPPER ALLOYS

14895 MUG MÜHENDİSLİK İvedik OSB 1363 Sk. (Eski 603) No:45 Yenimahalle /ANKARA Ankara TÜRKİYE A88MP0009 DRILLING OF HIGH STRENGTH

STEELS KUH SP-TCA 27.05.2014 N/A

14895 MUG MÜHENDİSLİK İvedik OSB 1363 Sk. (Eski 603) No:45 Yenimahalle /ANKARA Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 25.11.2015 N/A

11/15/2017 9:14:34 AM25 / 32



ISSUE DATE

APPROVAL DUE DATE


14402 O2 CORPORATION 235 N Washington WichitaUNITED STATES OF AMERICA

SAE ARP1176 TSP 119 CLEANING OF OXYGEN SYSTEM TAI


3104 OKAS END. YÜZEY İŞLEM LTD. ŞTİ.Ağaç İşleri Sanayi Sitesi 21. Cadde 1377. Sokak (Eski 521. Sokak) No:2 İvedik OSB, Yenimahalle

Ankara TÜRKİYE BAPS 144-005

IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIESIDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES

BOMBARDIER SP-CA 29.08.2013 N/A


Ankara TÜRKİYE BAPS 180-001 ALKALINE CLEANING BOMBARDIER SP-TCA 02.09.2013 N/A


Ankara TÜRKİYE BAPS 180-009 MANUAL SOLVENT CLEANING BOMBARDIER SP-TCA 02.09.2013 N/A


Ankara TÜRKİYE BAPS 160-010 CHROMIC ACID ANODIZING BOMBARDIER SP-TCA 02.09.2013 N/A


Ankara TÜRKİYE BAPS 160-023 HARD ANODIZING BOMBARDIER SP-TCA 02.09.2013 N/A


Ankara TÜRKİYE BAPS 160-040CONDUCTIVE CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS

BOMBARDIER SP-TCA 02.09.2013 N/A


Ankara TÜRKİYE BAPS 138-043 APPLICATION OF FLUID RESISTANT (FR) PRIMER BOMBARDIER SP-TCA 04.09.2013 N/A


Ankara TÜRKİYE BAPS 138-044APPLICATION OF FLUID RESISTANT (FR) ENAMELS AND DECORATIVE TOPCOATS

BOMBARDIER SP-TCA 04.09.2013 N/A


Ankara TÜRKİYE BAPS 138-055 ACCELERATED CURING OF ORGANIC COATINGS BOMBARDIER SP-TCA 04.09.2013 N/A


Ankara TÜRKİYE MIL A 8625 CHROMIC ACID ANODIZING ON ALUMINUM AND ALUMINUM ALLOYS KUH SP-TCA 26.12.2013 N/A


Ankara TÜRKİYE A88MP001 FINISH REQUIREMENTS KUH/KAI SP-TCA 15.01.2014 N/A


Ankara TÜRKİYE TPS 250, TPS 260 PRIMER APPLICATION, PAINT APPLICATION GENERAL



Ankara TÜRKİYE 80-T-35-5106 COATING WITH PUR BASED TOPCOAT A400M SP-TA 16.05.2016 N/A


Ankara TÜRKİYE 80-T-35-5002 COATING WITH TWO COMPONENT PRIMER, EP BASED A400M SP-TA 16.05.2016 N/A


Ankara TÜRKİYE 80-T-35-5901TREATMENT WITH AIR DRYING MOLYBDENUM DISULPHIDE LUBRICANTS

A400M UNSP-TA 16.05.2016 N/A


Ankara TÜRKİYE TPS 121 DRY BLASTING A400M, TAI PROGRAMS UNSP-TA 08.01.2017 N/A


Ankara TÜRKİYE 80-T-35-1200 PASSIVATION OF CORROSION RESISTANT AUSTENITIC STEEL A400M SP-TA 07.12.2016 N/A


Ankara TÜRKİYE 80-T-35-5030COATING WITH TWO/THREE-COMPONENT WATER-BASED PRIMER

A400M SP-TA 06.07.2017 N/A

11/15/2017 9:14:34 AM26 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE 80-T-35-5130COATING WITH TWO/THREE-COMPONENT WATER-BASED TOPCOAT

A400M SP-TA 06.07.2017 N/A


Ankara TÜRKİYE 80-T-35-1101 CHROMATING OF ALUMINUM AND ALUMINUM ALLOYS A400M SP-TA 19.06.2017 N/A


Ankara TÜRKİYE BAPS 180-031CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS

BOMBARDIER SP-TCA 02.08.2013 N/AAPPROVED DEVIATION: BAPS 180-031 7925


Ankara TÜRKİYE BAPS 180-030 ALKALINE ETCHING OF ALUMINIUM ALLOYS BOMBARDIER SP-TCA 02.09.2013 N/A

APPROVED DEVITION: BAPS 180-030 7923


Ankara TÜRKİYE BAPS 180-032 ACID CLEANING AND DEOXIDIZING ALUMINIUM ALLOYS BOMBARDIER SP-TCA 02.09.2013 N/A

APPROVED DEVITION: BAPS 180-032 7924


Ankara TÜRKİYE MIL-DTL-5541, TPS 210

CHEMICAL CONVERSION COATING ON ALUMINIUM AND ALUMINIUM ALLOYS

TAI PROGRAMS SP-TA 28.09.2012 N/A LIMITED TO CLASS

1A


Ankara TÜRKİYE TPS 211 CHROMIC ACID ANODIZE TREATMENMT

A400M, TAI PROGRAMS SP-TA 01.04.2016 N/A LIMITED TO ONLY

TYPE IB


Ankara TÜRKİYE AITM6-1001 PENETRANT INSPECTION A400M SP-TA 28.06.2017 N/A



Ankara TÜRKİYE TTS 100 PENETRANT INSPECTION TAI PROGRAMS SP-TA 28.06.2017 N/A



Ankara TÜRKİYE ASTM E1417 A88MP0023

STANDARD PRACTICE FOR LIQUID PENETRANT TESTING ACCEPTANCE CRITERIA FOR PENETRANT OR MAGNETIC PARTICLE INSPECTION

KUH SP-TCA 28.06.2017 N/A

METHOD A WATER WASHABLE PENETRANT SYSTEMALUMINIUM ALLOY PARTS ONLY (FOR LIQUID PENETRANT TESTING)


Ankara TÜRKİYE BAPS 176-002 FLUORESCENT PENETRANT INSPECTION BOMBARDIER SP-TCA 28.06.2017 N/A

METHOD A WATER WASHABLE PENETRANT SYSTEMALUMINIUM AND COPPER ALLOY PARTS ONLY


Ankara TÜRKİYE 80-T-35-1201PASSIVATION OF MARTENSITIC, FERRITIC CORROSION RESISTANT STEEL

A400M SP-TA 21.12.2016 N/A

ONLY COMPONENTS MACHINED ON ALL SIDES OR WITH MATING SURFACES PARTS CAN BE PROCESSED (PICKLING TANK IS NOT AVAILABLE)


Ankara TÜRKİYE 80-T-35-0104 PICKLING OF STAINLESS, AUSTENITIC STEEL A400M SP-TA 21.12.2016 N/A

THIS PROCESS STANDARD SHALL BE USED FOR PREPENETRANT ETCH OF AUSTENITIC STEEL

11/15/2017 9:14:34 AM27 / 32



ISSUE DATE

APPROVAL DUE DATE



Ankara TÜRKİYE TPS 111 ALKALINE PICKLING OF ALUMINUM AND ALUMINUM ALLOYS

A400M, TAI PROGRAMS SP-TA 08.03.2016 N/A

TPS 111 AND TPS 107 SHALL BE USED TOGETHER FOR PREPENETRANT ETCH OF ALUMINUM ALLOYS


Ankara TÜRKİYE TPS 107 ACID PICKLING OF ALUMINUM AND ALIMUNUM ALLOYS

A400M, TAI PROGRAMS SP-TA 08.03.2016 N/A

TPS 111 AND TPS 107 SHALL BE USED TOGETHER FOR PREPENETRANT ETCH OF ALUMINUM ALLOYS


Ankara TÜRKİYE BAPS 160-020CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS

BOMBARDIER SP-TCA 02.09.2013 N/A TYPE I AND TYPE II ARE APPROVED

7598 ORSAN OPS TALAŞLI İMALAT SAN. VE TIC. KOLL. ŞTI.Küçükçekmece İkitelli O.S.B. Mah. Marmara San. Sit. P-Blok No:9-10İSTANBUL

İstanbul TÜRKİYE 80-T-30-9910DRILLING, REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 26.02.2016 N/A

9693 SAMSUN YURT SAV. SAN. VE TİC. A.ŞOrganize Sanayi Bölgesi Ulubatlı Caddesi No: 2 Tekkeköy Samsun TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

4928 SARSILMAZ SILAH SAN.A.S.

Sarsılmaz Silah San.A.Ş.Düzce 1. Organize Sanayi Bölgesi5. Cadde No : 20 Beyköy Beldesi/Düzce Düzce TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

3175 SFT MAKINA ELEKTRONIK SAN.VE TIC. LTD.STI. Sincan OSB. Büyük Timur Cad. No: 6 Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A

22089 SKYMARK HAVACILIK TEKNOLOJİLERİ A.Ş.

SARAY MH. BAYRAKTAR CD. 1074 SK.NO:147 Ankara TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC



SARAY MH. BAYRAKTAR CD. 1074 SK.NO:147 Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 26.12.2016 N/A 22089-16-PCA001


SARAY MH. BAYRAKTAR CD. 1074 SK.NO:147 Ankara TÜRKİYE 80-T-30-6918

FINISHING OF METAL COMPONENTS (DEBURRING, CLEANING)

A400M UNSP-TA 23.12.2016 N/A 22089-16-PCA001


SARAY MH. BAYRAKTAR CD. 1074 SK.NO:147 Ankara TÜRKİYE AITM6-6004


A400M SP-TA 23.12.2016 N/A 22089-16-PCA001

2763 TEI - TUSAŞ MOTOR SANAYİ A.Ş.Esentepe Mah. Çevre Yolu Bulvarı No:345 P.K 162 Eskişehir TÜRKİYE NTA 71151 PH SERIES 300 AND 400 STAINLESS

STEEL HEAT TREATMENTS MELTEM III SP-TCA 05.09.2013 N/A

FURNACE NUMBER #5 IS QUALIFIED FOR THE STEEL TREATMENTS.FURNACE TEMPERATURE RANGE IS 454 � 1204 °C.

2763 TEI - TUSAŞ MOTOR SANAYİ A.Ş.Esentepe Mah. Çevre Yolu Bulvarı No:345 P.K 162 Eskişehir TÜRKİYE NTA 95051 HARDNESS OF METALLIC

MATERIALS MELTEM III SP-TCA 05.09.2013 N/AHARDNESS SCALES ARE 78 � 90 HR15N AND 35 � 60 HRC.

2763 TEI - TUSAŞ MOTOR SANAYİ A.Ş.Esentepe Mah. Çevre Yolu Bulvarı No:345 P.K 162 Eskişehir TÜRKİYE BAPS 168-030 HEAT TREATMENT OF CORROSION

RESISTANT & MARAING STEELS BOMBARDIER SP-TCA 04.09.2012 N/A

LIMITATION TO PRECIPITATION OF CUSTOM 465 PH STEEL TO H950 CONDITION ONLY.

2763 TEI - TUSAŞ MOTOR SANAYİ A.Ş.Esentepe Mah. Çevre Yolu Bulvarı No:345 P.K 162 Eskişehir TÜRKİYE TPS-381 STRESS RELIEF OF STEEL TAI

PROGRAMS SP-TCA 04.11.2013 N/A LIMITED TO FURNACE NO 5

11/15/2017 9:14:34 AM28 / 32



ISSUE DATE

APPROVAL DUE DATE


16582 TTAF SAVUNMA SANAYİ VE TİCARET A.Ş.Ostim Mah. Ahi Evran Cad. 1212.Sok. No:24 Yenimahalle Ankara TÜRKİYE TAS 333 ELECTRICAL HAND SOLDERING A400M SP-TA 28.11.2014 N/A

15563 TURKMAK MAKİNA MÜHENDİSLİK SAN. LTD. ŞTİ. 1435. sokak No:9-11 İvedik Osb Ankara TÜRKİYE 80-T-30-9910DRILLING,REAMING AND COUNTERSINKING OF RIVET AND SCREW HOLES

A400M SP-TA 25.11.2015 N/A

11237 USTEK MAKINA 129/12 SOKAK NO:19 4. SANAYİSİTESİ BORNOVA İzmir TÜRKİYE 80-T-30-9910


A400M SP-TA 01.12.2015 N/A

4290 UYGUR SAVUNMA VE END. ITH. IHR. MUH. INS. TIC. TAAH. LTD. ST

39. Sokak No:3 , Çankırı Bulvarı , Güzelhisar Mah. , AKYURT Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A


39. Sokak No:3 , Çankırı Bulvarı , Güzelhisar Mah. , AKYURT Ankara TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC




FINISHING OF METAL COMPONENTS (DEBURRING, CLEANING)

AIRBUS SEC-19 UNSP-TCA 15.10.2016 N/A 4290-16-PCA001


39. Sokak No:3 , Çankırı Bulvarı , Güzelhisar Mah. , AKYURT Ankara TÜRKİYE 80-T-39-0132 MARKING WITH INDELIBLE INK AIRBUS SEC-

19 UNSP-TCA 15.10.2016 N/A 4290-16-PCA001


39. Sokak No:3 , Çankırı Bulvarı , Güzelhisar Mah. , AKYURT Ankara TÜRKİYE AITM6-6004


AIRBUS SEC-19 SP-TCA 15.10.2016 N/A 4290-16-PCA001



CLEANING WITH ORGANIC SOLVENTS (COLD CLEANING AGENTS)

AIRBUS SEC-19 UNSP-TCA 15.10.2016 N/A 4290-16-PCA001




AIRBUS SEC-19 SP-TCA 15.10.2016 N/A 4290-16-PCA001

22341 WELLMAN DYNAMICS 1746 Commerce RdCreston, Iowa 50801 USA

Des Moines


TPS 121 DRY BLASTING TAI PROGRAMS SP-TA 11.08.2017 N/A


Des Moines


AMS 2610 PRESSURE TESTING, GASEOUS MEDIA PRESSURE AS SPECIFIED



Des Moines


AMS 2694 IN-PROCESS WELDING OF CASTINGS

TAI PROGRAMS, TLUH (ÖZGÜN HELİKOPTER)

SP-TA 08.08.2017 N/A 22341-17-PCA002


Des Moines


AMS 2771 HEAT TREATMENT OF ALUMINUM ALLOY CASTINGS

TAI PROGRAMS, TLUH (ÖZGÜN HELİKOPTER)

SP-TA 14.08.2017 N/A 22341-17-PCA002


Des Moines


ASTM E1742 STANDARD PRACTICE FOR RADIOGRAPHIC EXAMINATION

TAI PROGRAMS SP-TA 11.08.2017 N/A N/A


Des Moines


ASTM E1417 STANDARD PRACTICE FOR LIQUID PENETRANT TESTING

TAI PROGRAMS SP-TA 11.08.2017 N/A N/A


Des Moines


TPS-111ALKALINE PICKLING OF ALUMINUM AND ALUMINUM ALLOYS (PRE-PENETRANT ETCH)

TAI PROGRAMS UNSP-TA 14.08.2017 N/A

PICKLING PROCESS IS PERFORMED ACCORDING TO REQUEST FOR DEVIATION NO:0001

9809 YAYSE YAY VE MAK. SAN. TİC. LTD. ŞTİ.85. YIL CUMHURİYET MAH. SANAYİ CAD. NO:87 ARMUTLU-KEMALPAŞA/İZMİR İzmir TÜRKİYE TPS 381 STRESS RELIEF OF STEEL TAI

PROGRAMS SP-TA 08.02.2017 N/A 9809-17-PCA001PCQR-108-17

11/15/2017 9:14:34 AM29 / 32



ISSUE DATE

APPROVAL DUE DATE


9809 YAYSE YAY VE MAK. SAN. TİC. LTD. ŞTİ.85. YIL CUMHURİYET MAH. SANAYİ CAD. NO:87 ARMUTLU-KEMALPAŞA/İZMİR İzmir TÜRKİYE 80-T-36-1020 HEAT TREATMENT OF STEEL A400M SP-TA 08.02.2017 N/A 9809-17-PCA001

PCQR-108-17

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE BAC5602 HEAT TREATMENT OF ALUMINUM

ALLOYS BOEING SP-TCA 05.11.2014 N/A

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-30-6918 FINISHING OF METAL COMPONENTS

(DEBURRING, CLEANING)AIRBUS SEC-19 UNSP-TCA 17.06.2016 N/A

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-39-0132 MARKING WITH INDELIBLE INK AIRBUS SEC-

19 UNSP-TCA 17.06.2016 N/A

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-32-1000 FORMING OF ALUMINIUM SHEETS

AND SECTIONSAIRBUS SEC-19 UNSP-TCA 17.06.2016 N/A

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE AITM6-6004



12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-35-0014 CLEANING WITH ORGANIC


12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-30-4010 MACHINING OF METALLIC


12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-36-1010 HEAT TREATMENT OF ALUMINIUM A400M SP-TA 23.01.2017 N/A 12253-16-PCA001,

PCQR-90 REVA-16

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE

SS8043,SS8013,SS8810,AMS 2770, AMS 2750,SS 9213

HA1: HEAT TREATMENT OF ALUMINUM ALLOYS (INCLUDING 7075 T73)


SP-TCA 10.08.2017 N/A12253-17-PCA001PCQR-113-17

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE ASTM E8 LAB 1: TENSILE TESTING


SP-TCA 10.08.2017 N/A12253-17-PCA001PCQR-113-17

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE ASTM E18 LAB 7: HARDNESS TESTING


SP-TCA 10.08.2017 N/A12253-17-PCA001PCQR-113-17

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE SS8043, AMS 2770,

AMS 2750, SS 9213

HA: HEAT TREATMENT OF ALUMINUM ALLOYS (EXCLUDING 7075 T73)


SP-TCA 10.08.2017 N/A 12253-17-PCA001PCQR-113-17

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE MIL-STD-1537, SS

8810 LAB 8: CONDUCTIVITY TESTING


SP-TCA 11.08.2017 N/A 12253-17-PCA001PCQR-113-17

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-33-3010 SHEAR CUTTING OF SHEETS AND

SECTIONSAIRBUS SEC-19 UNSP-TCA 13.07.2017 N/A 12253-17-PCA003

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE TPS370 HEAT TREATMENT OF ALUMINUM

ALLOYSTAI PROGRAMS SP-TA 15.04.2015 N/A

A04.IİF.IF1-SOLUTION HEAT TREATMENT FURNACEA04.YŞL.YF1-AGING FURNACE

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE TTS 100 PENETRANT INSPECTION TAI



11/15/2017 9:14:34 AM30 / 32



ISSUE DATE

APPROVAL DUE DATE


12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE BSS 7039-BAC 5423 LIQUID PENETRANT INSPECTION

PENETRANT INSPECTION BOEING SP-TCA 28.06.2017 N/A


12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-30-9910



PROCESS IS LIMITED TO SATISFY DRAWING REQUIREMENTS OF SECTION 19. MANUEL DRILLING VIA DRILL GUNS OR COMPARABLE MEANS WAS NEITHER APPLIED NOR AUDITED.

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-32-1005 FORMING OF TI AND TI ALLOY

SHEETSAIRBUS SEC-19 UNSP-TCA 13.07.2017 N/A

QUALIFIED WITH LIMITATIONSLIMITED TO FORMING AT RT AS PER CHAPTER 5.2.1.

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-36-1010 HEAT TREATMENT OF ALUMINIUM AIRBUS SEC-

19 SP-TCA 08.12.2016 N/A RELATED PFA: PFA-TAI-S19-009

12253 YEPSAN SAVUNMA VE HAVACILIK SAN. VE TİC. A.Ş. Başkent Organize Sanayi Bölgesi Ankara TÜRKİYE 80-T-30-9910


A400M SP-TA 19.10.2015 N/A SPAR-12253-32-2015

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE STA 100-84-51 APPLICATION OF EPOXY PRIMER

AGUSTA, AGUSTA WESTLAND

SP-TCA 08.09.2014 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE STA100-83-06 PROCEDURE FOR APP LI CATION OF

NON-SLIP COATING


UNSP-TA 20.11.2015 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE STA100-84-64 APPLICATION OF POLYURETHANE

PAINTS


UNSP-TA 20.11.2015 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE AWPS002V APPLICATION OF WATERBORNE

CHROMATE FREE PRIMER


UNSP-TA 20.11.2015 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE STA 110L0029

FINISHING PREPARATION OF AIRFRAME COMPONENTS IN COMPOSITE MATERIALS

AGUSTA, AGUSTA WESTLAND, ATAK

UNSP-TA 17.02.2017 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE STA 100-84-27 APPLICATION OF EPOXY PAINTS

AGUSTA, AGUSTA WESTLAND, ATAK

UNSP-TA 17.02.2017 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE BAC5837 PREPARING EXTERIOR PLASTIC

SURFACES FOR PAINT BOEING UNSP-TA 31.07.2017 N/A

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE

STA110K0057 REV. CAWPS014K REV.AAWPS001Q REV.A

MANUFACTURING OF HIGH AND INTERMEDIATE TEMPERATURE CURE COMPOSITE PARTS

ATAK SP-TCA 18.11.2013 10.11.2019 ACCORDING TO DQP NO: IT16/0266/02

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE BAC 5325

APPLICATION OF NONCHROMATED PRIMER ON COMPOSITE, PLASTIC, TITANIUM AND CRES SURFACES

BOEING UNSP-TA 31.07.2017 N/A BMS10-103 APPLICATIONS ONLY

14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE BAC5000 SEALING, GENERAL BOEING UNSP-TA 31.07.2017 N/A BMS5-92 EDGE SEAL

APPLICATIONS ONLY

11/15/2017 9:14:34 AM31 / 32



ISSUE DATE

APPROVAL DUE DATE


14516 YÜKSEL KOMPOZİT TEKNOLOJİLERİ A.Ş.BAŞKENT OSB ŞADİTÜRK BLV. NO:5 MALIKÖY-TEMELLİ Ankara TÜRKİYE BAC 5980

NON DESTRUCTIVE INSPECTION OF COMPOSITE PART AND STRUCTURES


THREE SYSTEMS ARE APPROVED WITH THIS SQCS. SYSTEM 1- AUSS-MIDAS TTU MODIFIED IMMERSION SYSTEM (SQUIRTER) WITH THE IMASONIC TRANSDUCERS P/N 8074J103 AND 8074G104 AT 5 MHZ. SYSTEM 2- SEMI-AUTOMATED OLYMPUS OMNISCAN SX WITH FLAT PHASED ARRAY TRANSDUCER P/N 5L64-38.4×10-A12-P2.5-OM, 5 MHZ 64 ELEMENT WITH LUCITE WEDGE SA12-0L AND WITH CURVED ARRAY TRANSDUCER P/N 5CC25-32-42.3×6-R4-P-5-OM, 5 MHZ ARRAY. SYSTEM 3- MANUAL A-SCAN WITH TRANSDUCER P/N V201-RM AT 5 MHZ.

11/15/2017 9:14:34 AM32 / 32

TAI External Source Approved Processes List November - · PDF filemil-h-6875,ams2759,ams 2750 heat treatment of steel raw materials,heat treatment of steel parts, general requirements,pyrometry

Documents