Top Banner
Strategies for achieving optimal plant efficiency and increased output Asian Nitrogen + Syngas 2016 21-23 November 2016 Shangri-La Hotel, Jakarta, Indonesia 5 th Syngas | Ammonia | Urea | Nitrates | Methanol | GTL | Hydrogen Register today at www.nitrogenasia.com Sponsor: Supporters: Operator rate US$525 30 + experts presenting new technology developments and case studies NEW! Strategic Sessions examining supply, demand, feedstocks and investment 25 + exhibitors showcasing the latest technologies 23 technical papers/case studies exploring technology and operational improvements 13 + hours of certificated technical training Such a good conference, not only for new knowledge but also new networking. I am eager to attend this tremendous seminar again. Process Engineer, PT Petrokimia Gresik NEW! Interactive Troubleshooting clinics covering reformers and urea operations 200 + delegates: unparalleled peer-to-peer networking and knowledge sharing 7 + hours for peer-to-peer discussion and networking 5 practical, hands-on workshops
7

Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Apr 07, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Strategies for achieving optimal plant efficiency and increased output

Asian Nitrogen + Syngas 201621-23 November 2016Shangri-La Hotel, Jakarta, Indonesia

5th

Syngas | Ammonia | Urea | Nitrates | Methanol | GTL | Hydrogen

Register today at www.nitrogenasia.com

Sponsor: Supporters:

Operator rate

US$525

30+ experts presenting new technology developments and case studies

NEW! Strategic Sessions examining supply, demand, feedstocks and investment

25+ exhibitors showcasing the latest technologies

23 technical papers/case studies exploring technology and operational improvements

13+ hours of certificated technical training

Such a good conference, not only for new knowledge but also new networking. I am eager to attend this tremendous seminar again.Process Engineer, PT Petrokimia Gresik

NEW! Interactive Troubleshooting clinics covering reformers and urea operations

200+ delegates: unparalleled peer-to-peer networking and knowledge sharing

7+ hours for peer-to-peer discussion and networking

5 practical, hands-on workshops

Page 2: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Asian Nitrogen + Syngas 2016 • 21-23 November 2016, Shangri-La Hotel, Jakarta, Indonesia

Keep updated on the programme, visit www.nitrogenasia.com

Now in its fifth year, the conference returns to Indonesia, South East Asia’s nitrogen production hub, from 21-23 November 2016, at the Shangri-La Jakarta. The conference is firmly established as the premier event for promoting and enhancing best practice through technical innovation for the Asian nitrogen and syngas industries.This is an unparalleled opportunity for nitrogen and syngas producers to develop a strategic approach to maximising the value of existing assets, optimising plant operations, and troubleshooting operational problems to ensure safe, reliable and environmentally compliant production.

The comprehensive three-day programme will feature strategic sessions exploring supply and demand dynamics across the fertilizer, methanol and syngas markets; feedstock outlooks for natural gas and coal gasification; and opportunities for technical optimisation and investment in co-production.

These sessions will be complemented by an extensive technical programme incorporating practical workshops, technical papers and interactive troubleshooting clinics, providing an unrivalled opportunity for peer-to-peer problem solving, through case-studies and shared experience.

Whether you are investing in a new plant, revamping an existing plant, or maintaining your plant to achieve optimal production, safety and environmental performance, CRU’s Asian Nitrogen + Syngas 2016 is the must-attend event for 2016.

5%

Who attends? 200+ of your peers:

Participants by Industry

Participants by Business Activity

Participants by Region

10%

6%

2%

2%

3%

North America

Syngas, Ammonia and Urea

Syngas and Methanol

Syngas and Ammonia

Syngas, Ammonia and Nitrates

Syngas, Ammonia, Urea and Nitrates

Plant ManagerEngineering/Process/Technology Providers

Plant Machinery/Materials and Equipment

Other

Producer: Fertilizer/ Feed/Industrial

General

ProcessMechanical

Maintenance

Europe MENA SouthAsia

SouthEastAsia

East Asia CIS

Oceana

5%

29%

43%

Engineering Level

61%

18%

7%

7%

7%

28%24%6% 28%45%

44%

6%

5%

The conference is very informative and provides valuable insights on nitrogen. It is also a good platform to learn about the best products from other plants and organisations.Executive Ammonia/Methanol, Petronas Chemicals Fertiliser Kedah Sdn Bhd

This conference has benefitted me in plant and energy evaluation. Worldwide information and networking with experienced experts and process licensors of catalyst and equipment.Process Engineer Manager, PT Pupuk Kalimantan Timur

Page 3: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Asian Nitrogen + Syngas 2016 • 21-23 November 2016, Shangri-La Hotel, Jakarta, Indonesia

Register today at www.nitrogenasia.comKeep updated on the programme, visit www.nitrogenasia.com

New for 2016: Interactive troubleshooting clinicsThese clinics are designed to enable delegates to submit questions or case studies around operational problems they have faced in the running of their plants. Each clinic will be moderated and will incorporate an open exchange of ideas and experience from all participants.

There will be one clinic looking at troubleshooting performance and operational problems associated with Reformers.

The second clinic will discuss common problems in Urea production.

Submit your question or case study to [email protected] Questions and case studies are welcome to be submitted anonymously.

Why attend?

What you will learn at Asian Nitrogen + Syngas 2016:

1stop forum

for the latest operational

updates

7+hours of

dedicated networking

13hours of

certificated technical training

5practical hands-on

workshops

23papers highlighting

technology and operational

improvement

How market developments in the nitrogen and methanol industries will impact trade balances and prices globally and in SE Asia

Practical solutions to common operational problems in steam reformers

Plant energy efficiency improvements for ammonia and urea complexes

What catalyst developments are providing greater efficiency in syngas, ammonia and methanol plants

How to optimise performance with new technical services and solutions

New developments in the production of nitrates

New developments in urea operations, production and finishing

The Technical workshops are hosted by experts in the various technical areas. They are open to:

* Plant and Production Management

* Technical Directors

* Operations personnel

* Maintenance/Reliability/Sustainability staff

* Asset Integrity/Utilities staff

* Health/Safety/Environment staff

* Mechanical Engineers

* Process Engineers

Some restrictions may apply, so please see each workshop outline for details of who the workshop is open too.

Further information on the workshops is available on the website.

Technical workshops

Page 4: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Asian Nitrogen + Syngas 2016 • 21-23 November 2016, Shangri-La Hotel, Jakarta, Indonesia

Keep updated on the programme, visit www.nitrogenasia.com

Workshop: Emissions and environment Open for Urea plant owners and operators

11:00 Governments worldwide put stricter norms on emission and energy consumptions in order to protect the environment.

Stamicarbon is a front runner in developing technologies that enable the urea industry to comply with these regulations, in order to give plant owners a clear competitive advantage and to simultaneously improve the quality of life for all.

See website for full content of all workshops

Technical papers: Reformers

11:00 Optimum reformer monitoring and balance

John Brightling, Johnson Matthey

11:30 Reformer tube inspection and life assessment: Case studies of online failures avoided

Charles Thomas, Daniel Drabble, Quest Integrity

12:00 Reformer tubes in a steam methane reformer: Critical components

Hugues Chasselin, Manoir Industries

STREAM BSTREAM A

10:30 Break

12:30 Lunch

Clinic 1: Reformers: Troubleshooting and solutions

13:30 This interactive clinic will enable delegates to submit questions or case studies in advance or on site. Potential subject areas for discussion include:- Convection section fouling, inspections and cleaning- Flue gas tunnel problems – collapse or derail of bricks

arrangement- Burner issues – uneven flames, impingement on

tubes, burner refractory damages- Tramp air issues – radiant section, convection section

furnaces & combustion air preheaters- Commissioning and start-up protocols on Reformers - Turnaround planning - Refractory, transfer line and catalyst tube failures - Catalyst crushing or poisoning

Submit your question or case study to [email protected]

Workshop: Emissions and environment (continued) Open for Urea plant owners and operators

13:30 This workshop provides participants with insights in the different available process technologies and how they relate to each other in terms of energy consumption, it provides information on the latest emission scrubbing technologies and the possibilities to install these in existing plants.

During this interactive workshop, participants also have the opportunity to connect with experts from Stamicarbon to discuss possibilities on how to improve the efficiency of their plants.

See website for full content of all workshops

09:00 Global nitrogen outlook

- The end of the boom: The outlook for global capacity as investment slows.

- Cost competitiveness: The impact of gas market reforms, a structurally weak oil market and a depressed coal price on global nitrogen margins

- How will nitrogen prices fare against deflationary macro headwinds?

Anders Isberg, Senior Consultant, CRU

09:30 Methanol market outlook

- Global methanol balance to 2017

- Main drivers

- Regional balances

- Methanol use and economics

- Methanol pricing and margins

Mark Berggren, Managing Director, Methanol Market Services Asia

10:00 Global gas outlook

- Short-medium term outlook for the global gas market- Supply and demand outlook for key regions

PLENARY SESSION

DAY ONE: MONDAY 21 NOVEMBER

Hosted by

Hosted by

Page 5: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Asian Nitrogen + Syngas 2016 • 21-23 November 2016, Shangri-La Hotel, Jakarta, Indonesia

Register today at www.nitrogenasia.comKeep updated on the programme, visit www.nitrogenasia.com

12:30 Lunch

10:30 Break

Clinic 2: Urea production and operations troubleshooting and solutions

11:00 This interactive clinic will enable delegates to submit questions or case studies in advance or on site. Potential subject areas for discussion include:

- High pressure equipment reliability

- High pressure piping reliability

- Safety incidents

- Revamp options

- Urea product quality

- Corrosion problems

Submit your question or case study to [email protected]

Workshop: Pre-commissioning, commissioning and start-up of steam methane reformer Open to all attendees

11:00 Commissioning and start-up is the last and critical step of a project execution process after mechanical completion.

This phase covers pre-commissioning, commissioning and start-up activities including guarantee performance tests of an equipment or plant.

One of the key equipment items in a conventional plant for production of Ammonia, Methanol and Hydrogen is the steam-methane reformer furnace.

See website for full content of all workshops

Workshop: Fertilizer complexes: An integrated design approach for revamping and new plantsOpen to operators and technical staff from nitrogen and syngas producers

15:30 The workshop will explore ways to improve the efficiency of fertilizer plants by adopting the most advanced technologies and by closely integrating the various units. Two case histories will be discussed, involving ammonia and urea complexes.

See website for full content of all workshops

STREAM B

Technical papers: Ammonia revamps and CO2 removal

15:30 Improved KBR technologies enables low cost ammonia production

Akhil Nahar, KBR

16:00 Cutting-edge solutions for ammonia plant revamps

Johan Jönsson, Haldor Topsoe

16:30 Revamping Benfield solution based carbon dioxide removal systems in ammonia plants

Shamik Bhattacharya, KBR

17:00 Optimising CO2 removal processes in ammonia production using formulated gas treating solvents

Armin Hassanzedeh, Dow

STREAM A

09:00 Agricultural demand outlook- Major demand points and key price drivers

- Key developments in regional supply

- Global fertilizer markets competitive landscape and medium-term outlook

Mike Gallagher, General Manager – Fertilizers, CRU

09:30 NPK market dynamics: Opportunities for co-production

10:00 Iran Fertilizer & Methanol outlook: Opportunities and Challenges- Current production status

- Feedstock outlook

- Off-taking

- Investment opportunities

- Projects update

Mohammad Ali Vadikheil, CEO, Phoenix Vision

PLENARY SESSION

17:30 Close of day one

DAY TWO: TUESDAY 22 NOVEMBER

Hosted by

Hosted by

15:00 Refreshment Break

Page 6: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Asian Nitrogen + Syngas 2016 • 21-23 November 2016, Shangri-La Hotel, Jakarta, Indonesia

Keep updated on the programme, visit www.nitrogenasia.com

09:00 Managing risks to promote investments and enhance competitiveness in the fertilizer industry- Sources of funding: traditional major funding models- Where IFC is underwriting investment- Options for funding plants where rational funding isn’t possible- Mitigating risk for investors around the world- Who is investing in agriculture and fertilizer projects and where?Anil Chandramani, Chief Investment Officer & Global Sector Lead, Chemicals & Fertilizers, International Finance Corporation (TBC)

09:30 Case study: Opportunities for coal gasification integration

Speaker to be confirmed, IHI

10:00 Seamless integration of melamine plant into nitrogen based fertilizer complex: The “plug-in” concept is a breakthrough innovative solution

Alberto Di Amicis, Eurotecnica

Workshop: Pre-commissioning, commissioning and start-up of steam methane reformer (continued) Open to all attendees 13:30 The workshop focuses on:

- Pre-commissioning and commissioning activities

- Pre-start-up scenarios

- Pre-start-up and start-up scenarios

- Controls and safety systems

- Burner light off

- Refractory dryout

- Process flow routes for introducing steam then introducing methane to production and other start-up activities required to start production of a final product.

STREAM B

Technical papers: Energy efficiency improvements for ammonia and urea complexes

13:30 Energy efficiency improvements in ammonia production by combines use of Clariant AmoMax-10 catalyst and Casale 3-bed Axial-Radial reactor

Speaker to be confirmed, Clariant

Speaker to be confirmed, Casale

14:00 Energy consumption for ammonia/urea production: Analysis and optimisation

Dr Klaus Noelker, TKIS

14:30 Energy efficiency at ammonia plants: Waste to power

Anshuman Pandey, OPRA Turbines

STREAM A

15:00 Refreshment Break

17:30 Close of day two

Workshop: Steam reformer assessment and optimization using a Topsoe “health check” Open to operators and technical staff from nitrogen and syngas producers

15:30 The steam reformer is one of the most critical units in ammonia and methanol plants and a well-performing steam reformer is the key to efficient production. The workshop will focus on the various challenges which operators of steam reformers face during their daily work and the various tools available to carry out a “health check” on a steam reformer.

The workshop will begin with an introduction on how to carry out a “health check” on steam reformers, followed by an interactive session where the participants will work with the “health check”, using the experience they have gained from operating steam reformers.

Upon completing the workshop, the participant will receive a workshop certificate confirming participation. With additional training in the Topsoe Academy™ program, this can lead to a formal Topsoe certification of steam reformer assesment and optimization.

Technical papers: Developments in urea production

15:30 Started up: Toyo’s large single-line urea granulation plants, 3,500 and 4000 MTD

Keita Kamiyama, Toyo Engineering

16:00 Case study: Prilling tower construction and modernatization; granulation in high-speed drum granulation unit

Natalia Kargaeva, NIIK

16:30 The Snamprogetti SuperCups solution

Speaker to be confirmed, Saipem

16:30 MicroMist™ Venturi Scrubbing: The best available technique for emission prevention in urea production

Wilfried Dirkx, Stamicarbon

DAY THREE: WEDNESDAY 23 NOVEMBER

Hosted by

Hosted by

PLENARY SESSION

Page 7: Syngas | Ammonia | Urea | Nitrates | Methanol | GTL ... · Syngas, Ammonia and Urea Syngas and Methanol Syngas and Ammonia Syngas, Ammonia and Nitrates Syngas, Ammonia, Urea and Nitrates

Asian Nitrogen + Syngas 2016 • 21-23 November 2016, Shangri-La Hotel, Jakarta, Indonesia

Keep updated on the programme, visit www.nitrogenasia.com

15:00 Close of conference

13:00 Lunch

Workshop: Clariant Catalysts - Embarking the future via innovative solutionsOpen to operators and technical staff from nitrogen and syngas producers

11:00 This workshop will discuss the latest innovative technologies and catalytic solutions used in the syngas industry, via case studies from ammonia plants worldwide.

The workshop aims to give you a better understanding of how to maximise the efficiency and productivity of the plant via discussions of case studies, best practice and technology innovations.

In addition to topics related to natural gas feedstock-based ammonia plants, we will also provide insight into sour gas shifts technologies, whereby coal is used as an economical replacement for natural gas in an existing/new ammonia plants.

See website for full content of all workshops

STREAM B

Technical papers: Improving the reliability and profitability of ammonia and urea complexes

11:00 High-fidelity Operator Training Simulators to increase plant safety and profitability

Michael Eltink, Protomation

Frederick Kessler, TKIS

11:30 Improving fertilizers complexes, keeping them competitive and reliable: Concepts and case histories

Ermanno Filippi, Casale

12:00 Freedom to operate: Topsoe AR-401 pre-reforming catalyst for multiple feedstocks

Pia Elholm, Haldor Topsoe

12:30 Resolving chronic high vibration problems of CO2 Steam Turbine

Muhammad Zeeshan Shoaib, Fauji Fertilizer Company

STREAM A

Technical papers: Nitrates14:00 Trials, troubles and triumphs: Start-up of TKIS’s LDAN

plant complex for Vinacomin, Vietnam

Michael Groves, TKIS

14:30 Current achievements of EZOCM in catalytic systems production

Alexander Andreev, EZOCM

Technical papers: Urea14:00 The FORMOX integrated UFC process

John Pach, Johnson Matthey

14:30 Innovation in materials to deal with the challenging conditions of urea synthesisDaniel Gullberg, SandvikKirk Ofei, Alex Scheerder, Filippo Colucci Stamicarbon

Sponsorship Opportunities:Meet your target audience, showcase your products/service and increase your brand recognition at this premier event. Choose from:

Plus your logo will be included on: all the event’s marketing brochures, emails, website (with a link to your site) and advertisements; and your logo will be included in the show guide, and on generic branding at the event including banners, holding slide and stage set in the conference auditorium

COFFEE BREAK SPONSORSHIPBenefit from having your company branding clearly visible during the coffee breaks, via table flags, napkins and coasters.

REGISTRATION DESK SPONSORSHIPBe the first brand delegates see on arrival at the event, and throughout the event.

LUNCHEON SPONSORSHIP Benefit from your branding on all lunch tables with VIP service, plus have your company logo in lights

To book your stand, contact Michelle Fisk: [email protected], or call + 44 (0) 20 7903 2159

1

RegDesk

LUNCH AREA

2

3

4

5

6

7

8 9

12

11

10

15

14

13

17

16

18

24

23

22

19

20

21

CONFERENCEROOM

CONFERENCEROOM

1. Unidense Technology GmbH2. Reserved3. thyssenkrupp Industrial Solutions4. Gemaco Special Stainless Steels5. SpectraSensors6. Quest Integrity7. AMETEK LAND8. Haldor Topsoe A/S9. LLC «NIAP-KATALIZATOR»10. 11. Eurotecnica Contractors and

Engineers S.p.A.12. Stamicarbon

13. BD Energy Systems14. FLEXIM Instruments Asia Pte Ltd15. Clariant16. 17. Heurtey Petrochem S.A.18. Casale19. Manoir Industries20. 21. Evonik Performance Materials

GmbH22. Greens Combustion23. Toyo Engineering Corporation24. Reserved

Meet the Exhibitors:

Last few stands

remaining!

Sold Available

Hosted by