Sure-LitesThe LED APX series is UL924 code compliant solution
for indoor exit requirements. It is available as AC only (APX6) or
self-powered (APX7) with a maintenance free nickel cadmium battery.
The self-powered version will operate for a minimum of 90 minutes
during a power outage. All models feature an LED source available
in red or green, are field configurable for single or double face
and are universal mount (ceiling, wall or end). The polycarbonate
housing is available in white or black.
SPECIFICATION FEATURES
Electrical- Dual voltage input 120/277VAC, 60Hz
- Solid-State voltage limitedcharger (APX7)
- Brownout circuit (APX7)- Test switch / Power indicatorlight
(APX7)
Housing Construction- All components are injectionmolded, color
stable, highimpact thermoplastic material
- Available in a white or black finish- Components are of
snap-fitconstruction to facilitateunder 5-minute installation
- Reinforcing ribs throughoutto provide maximum
strengthconnections
- All components including batteryand electronics are located
insidethe exit housing
- Snap-out or snap-in chevrondirectional indicators havefull
3/4” stroke
- Universal exits can be fieldconfigured as single face ordouble
face
- Snap-fit canopy with mountingscrews included with all
exits
- Exit can be ceiling, wall, orend mounted
- Universal J-box mountingpattern
- Operating temperature range10 °C to 40 °C
Battery- Sealed nickel cadmium- Maintenance free, long life-
Full recharge time:24 hrs (max.)
Code Compliance- UL 924 Listed- UL Damp Location Listed- Life
Safety NFPA 101- NEC/OSHA- Most State and Local Codes- operatig
temperature range 10 °C
to 40 °C- California Energy Code
compliant
Lamp Data- AC LED: Long life LED lamps
provide uniform diffusedillumination
- DC: LED DC lamps (Brighter inemergency mode, APX7)
Warranty- Five-year warranty- Seven-year prorated battery
warranty
APX SERIES
TD505040EN2017-10-3
DESCRIPTION
E N E R G Y D A T AMaximum power
consumption
under all charge
conditions:
Sealed NickelCadmium BatteryLED Exits - Red
Input Power:
120V = .99W
277V = 1.14W
Input Current
(Max.):
120V = .07A
277V - .07A
Power Factor:
120V = >.12
277V = >.06
LED Exits - Green
Input Power:
120V = .93W
277V = 1.05W
Input Current
(Max.):
120V = .07A
277V = .07A
Power Factor:
120V = >.11
277V = >.05
Energy DataAC Only LED
Exits - Red
Input Power:
120V = 1.31W
277V = 1.74W
Input Current
(Max.):
120V = .07A
277V - .08A
Power Factor:
120V = >.17
277V = >.08
LED Exits - Green
Input Power:
120V = 1.33W
277V = 1.76W
Input Current
(Max.):
120V = .07A
277V = .07A
Power Factor:
120V = >.05
277V = >.03
1-5/8"[41mm]
11-5/8"[295mm]
7-3/16"[183mm]
THERMOPLASTIC EXIT
AC ONLY SELF POWERED
EMERGENCY
LED LAMPS
EXIT LIGHTING
Catalog # Type
Date
Project
Comments
Prepared by
ORDERING INFORMATION
SAMPLE NUMBER: APX7RBK
Series Battery Face Options Letter Colors Housing Color Remote
Heads Powered
APX 6 = no battery (AC only)7 = nickel cadmium battery
_ = Universal R = RedG = Green
_ = WhiteBK = Black
APX6R,APX6G,APX6RBK,APX6GBK APX7R,APX7G,APX7RBK,APX7GBK
operatingtemperaturerange
-20˚to 50˚Coperatingtemperaturerange
10˚to 40˚C
Specifications and dimensions subject to change without
notice.
TECHNICAL DATA
LampsSelf-Powered LED versions of the All ProEmergency Series
Exits use energy efficient,long life LEDs to provide uniform
diffuseillumination of the exit face. Both the redand green LEDs
require no maintenance andconsume a total of 2.0 watts. The low
operatingcosts and zero maintenance requirement makesLED lamps the
wisest choice for exit signstoday. Emergency illumination is
provided byLED lamps,
Housing ConstructionRugged, durable, injection
moldedthermoplastic materials are used throughout theAll Pro
Emergency Series Exits. All structuralcomponents are designed with
reinforcingribs to add additional rigidity and to
maximizestructural integrity. These materials are impactand scratch
resistant, and they have been UVstabilized to resist discoloration
due to ageand ultraviolet radiation. All components aredesigned to
be of snap-fit construction - nomechanical fasteners - to
facilitate installationin under 5-minutes. Any components
requiredfor installation (wirenuts, wire leads, universalmetal
J-box bracket, etc.) are all includedwith each exit. The universal
design of the AllPro Series Exits enables universal exits to
beconfigured as single face or double face in thefield. All
Self-Powered All Pro Series Exits canbe wall, ceiling, or end
mounted; a rugged,snap-fit, low profile canopy with captive
screwsis included with every exit for ceiling and endmounting
applications. The housings are available with a white or black
finish.
LensLenses are made from durable impact resistantthermoplastic.
All exit faces are designed withfull 3/4” stroke snap-out or
snap-in chevrondirectional indicators to insure maximumvisibility
and compliance with the latest codes.
Solid-State Charger (APX7)Supplied with a 120/277 VAC, voltage
regulatedsolid-state charger. Immediately uponrestoration of AC
current after a power failure,the charger provides a high charge
rate. Thecharge circuit reacts to the condition of thebattery and
regulates the charging process inorder to maintain peak battery
capacity andmaximize battery life. Solid-state
constructionrecharges the battery following a power failurein
accordance with UL 924.
Brownout Circuit (APX7)The brownout circuit on All Pro exits
monitorsthe flow of AC current to the exit and activatesthe
emergency lighting system when apredetermined reduction of AC power
occurs.This dip in voltage will cause most ballastedfixtures to
extinguish causing loss of normallighting even though a total power
failure hasnot occurred.
Test Switch/Power Indicator Light (APX7)A test switch located on
the bottom of the exitpermits the activation of the emergency
circuitfor a complete operational systems check. ThePower Indicator
Light provides visual assurancethat the AC power is on.
Sealed Nickel Cadmium BatteryAll Pro Emergency sealed nickel
cadmiumbatteries are maintenance free with a lifeexpectancy of 10
years. The sealed rechargeablenickel cadmium battery offers high
dischargerates and stable performance over a widerange of
temperatures. The specially designedresealable vent automatically
controls cellpressure, assuring safety and reliability.This battery
is best suited for harsh ambienttemperatures because the
electrolyte is notactive in the electrochemical process.
WarrantyThe All Pro Series exit signs are backed by afive-year
warranty.
APX SERIES EXITS WITH REMOTE CAPACITY
Cooper Lighting Solutions 1121 Highway 74 SouthPeachtree City,
GA 30269P: 770-486-4800www.cooperlighting.com
TD505040EN-1: TD505040EN-2: TD505040EN-3: TD505040EN-4:
TD505040EN-5: TD505040EN-6: