Top Banner
STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights
11

STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

Jan 17, 2018

Download

Documents

Gavin Lee

Specifically designed to fit the American rafter system: – Minimizes the work and time required for installation – Installs 1/3 Less Time versus top competition – The rough opening is ½” larger than the frame size. – 14” and 22” Models fit perfectly in 16” and 24” rafters – 30” and 46” Models fit perfectly in two 16” and 24” rafters.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

STARLIGHT SKYLIGHTSHow to Install:

Standard Deck Mount Skylights

Page 2: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Dual Flashing System: – Continuous aluminum

welded flashing– 5 x 7 pre-bent flashing– GUARANTEED Against

Leaks• One Complete Package:– No additional boxes– No additional assembly

required

Page 3: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Specifically designed to fit the American rafter system:– Minimizes the work and time

required for installation– Installs 1/3 Less Time versus top

competition– The rough opening is ½” larger

than the frame size. – 14” and 22” Models fit perfectly

in 16” and 24” rafters– 30” and 46” Models fit perfectly

in two 16” and 24” rafters.

Page 4: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• After determining and chalking your rough opening:– Saw the opening

between the rafters• This leaves you with

your opening

Page 5: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• You may now felt the roof deck

• Also you may run the shingles up the opening as seen in the diagram

Page 6: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Remove skylight from the box

• Perimeter Flashing is already welded/installed onto the unit.

• Extend the hold down straps perpendicular to the unit and slightly toward the center.

Page 7: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Allow hold down straps to pass through rough opening.

• Wrap the hold down straps to the rafter

• Nail or screw into place

Page 8: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Lay your first row of shingles up to the skylight

• Insert step flashing into step flashing retainer and on top of shingles.

Page 9: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Lay shingle on top of pre-bent step flashing.

• Repeat up roof• Last piece of step

flashing is tucked into step flashing pocket

• Rotate into step flashing retainer and slide into step flashing pocket.

Page 10: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.
Page 11: STARLIGHT SKYLIGHTS How to Install: Standard Deck Mount Skylights.

• Finish installing shingles• Top shingle should butt

against the header perimeter flashing.

• Install dry-wall into trim grooves– Accommodates 5/8” and

1/2” dry-wall.• CONGRATULATIONS!! You

have successfully installed a Starlight Skylight.