Top Banner
1 Standard Parts Catalogue
70

Standard Parts Catalogue

Jan 05, 2017

Download

Documents

vonhi
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Standard Parts Catalogue

1

Standard Parts Catalogue

Page 2: Standard Parts Catalogue

2

Data Plastics Ltd

Standard Parts Catalogue January 2012

Contents

Tapered Caps and Plugs – Pages 4-10

Pipe Thread Protectors – Pages 41-42

Electrical Connector Caps – Page 11

Round PVC Caps - Pages 43-44

Electrical Connector Plugs – Page 12

Standard and Hi-Temp Round plugs or Square Caps– Pages 45-46

Non-Threaded Caps and Plugs Wide-Flange – Page 13-15

Vinyl Pull Caps – Pages 47-48

Interrupted-Bead Plugs – Page 16

Hi-Temp Silicone Caps and Plugs – Pages 49-50

Tube Caps and Plugs – Page 17-25

Hi-Temp Flexible Protection Caps – Pages 51

Caps and Plugs For Threaded Parts – Pages 26-40 BSP, UNF, JIC, UN, UNS, NPT and Metric

Ferrules and End Caps – Pages 52-54

Call our Sales Team on 01993 700777 or email us at

[email protected] to obtain a quote or ask for

samples of the parts you require.

Page 3: Standard Parts Catalogue

3

Finishing Parts – Ribbed Inserts – Pages 55-60

Materials and Properties Chart Page 69

Snap-in Plugs – Pages 61-62

Conversion Table Page 70

Quick Release Coupling Caps and Plugs – Pages 63

Hose Protection Flanged Washers – Page 64

Bundle End Caps – Page 65

SEA Flange Caps – Pages 65

Cable Ties – Page 66

Protective Sleeving – Pages 67-68

Page 4: Standard Parts Catalogue

4

Tapered Caps and Plugs

SP33000 Series Red LD Polythene

SP33000 Series Red LD Polythene

To fit thread Dimensions

Part Number Cap Plug A B C D E F Outside Dia Inside Dia Depth Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

SP33002 M4 M6 0.173 4.39 0.240 6.10 0.111 2.82 0.178 4.52 0.375 9.53 0.375 9.53 10,000

SP33003 M5/M6 M8 0.240 6.10 0.302 7.67 0.178 4.52 0.240 6.10 0.375 9.53 0.438 11.13 10,000

SP33004 1/4” UNF 3/8” UNF 0.299 7.59 0.365 9.27 0.237 6.02 0.303 7.70 0.375 9.53 0.500 12.70 10,000

SP33005 M8 1/8” BSP 0.330 8.38 0.396 10.06 0.268 6.81 0.334 8.48 0.375 9.53 0.531 13.49 10,000

SP33006 - - 0.370 9.40 0.427 10.85 0.308 7.82 0.365 9.27 0.375 9.53 0.563 14.30 10,000

SP33007 M10 M12 0.396 10.06 0.456 11.58 0.334 8.48 0.394 10.01 0.375 9.53 0.594 15.09 10,000

SP33008 1/8” BSP 1/4” BSP 0.423 10.74 0.485 12.32 0.361 9.17 0.423 10.74 0.375 9.53 0.625 15.88 10,000

SP33009 - M14 0.452 11.48 0.513 13.03 0.390 9.91 0.451 11.46 0.375 9.53 0.656 16.66 10,000

SP33010 M12 9/16” UNF 0.476 12.09 0.547 13.89 0.414 10.52 0.485 12.32 0.438 11.13 0.688 17.48 10,000

SP33011 1/4”BSP M16 0.537 13.64 0.608 15.44 0.475 12.07 0.546 13.87 0.438 11.13 0.750 19.05 10,000

SP33012 M14 3/8” BSP 0.555 14.10 0.631 16.03 0.493 12.52 0.569 14.45 0.469 11.91 0.750 19.05 10,000

SP33013 - M18 0.580 14.73 0.667 16.94 0.518 13.16 0.605 15.37 0.500 12.70 0.813 20.65 10,000

SP33014 M16 M20 0.646 16.41 0.727 18.47 0.584 14.83 0.665 16.89 0.500 12.70 0.875 22.23 7,500

SP33015 - - 0.710 18.03 0.785 19.94 0.648 16.46 0.723 18.36 0.500 12.70 0.875 22.23 5,000

SP33016 M18 1/2” BSP 0.690 17.53 0.788 20.02 0.628 15.95 0.726 18.44 0.563 14.30 0.937 23.79 5,000

SP33017 3/4” UNF M22 0.730 18.54 0.823 20.91 0.668 16.97 0.761 19.33 0.563 14.30 0.968 24.58 5,000

SP33018 - 7/8” UNF 0.750 19.05 0.848 21.54 0.668 16.97 0.786 19.96 0.563 14.30 1.000 25.40 5,000

SP33065 - - 0.875 22.22 0.875 22.22 0.760 19.30 0.760 19.30 1.000 25.40 1.000 25.40 1,000

SP33019 1/2” BSP 5/8” BSP 0.813 20.65 0.915 23.24 0.751 19.08 0.853 21.67 0.625 15.88 1.063 27.00 5,000

SP33020 M22 1” UNF 0.866 22.00 0.981 24.92 0.804 20.42 0.919 23.34 0.625 15.88 1.125 28.58 5,000

Back to Contents

The tapered body provides firm friction fit as a cap or plug. To fit all BSP, NPT and

Metric sizes from 1/8” to 6” (3mm to 152mm). This range can also be produced in

a variety of other colours and materials including: High-temp TPR for paint and

plating protection up to 150 oC and Polypropylene for requirements up to 110

oC.

Page 5: Standard Parts Catalogue

5

Tapered Caps and Plugs (continued from previous page)

SP33021 5/8” BSP - 0.920 23.37 1.040 26.42 0.858 21.79 0.978 24.84 0.688 17.48 1.156 29.36 2,500

SP33022 M27 M28 0.972 24.69 1.090 27.69 0.910 23.11 1.028 26.11 0.750 19.05 1.250 31.75 2,500

SP33061 - - 0.984 25.00 1.106 28.09 0.844 22.45 1.006 25.55 0.656 16.66 1.438 36.53 2,500

SP33023 M28 M30 1.101 27.97 1.215 30.86 1.039 26.39 1.153 29.29 0.750 19.05 1.375 34.93 2,500

SP33025 M32 M35 1.224 31.09 1.355 34.42 1.162 29.51 1.293 32.84 0.750 19.05 1.500 38.10 2,000

SP33033 - - 1.299 32.99 1.355 34.42 1.237 31.42 1.293 32.84 0.375 9.53 1.500 38.10 1,500

SP33026 1” BSP 1 1/8” BSP 1.312 33.32 1.465 37.21 1.250 31.75 1.403 35.64 0.875 22.23 1.625 41.28 1,500

SP33027 1 1/8” BSP 1 1/4” BSP 1.447 36.76 1.600 40.64 1.385 35.18 1.538 39.07 0.875 22.23 1.750 44.45 1,000

SP33034 1 1/2” UNF - 1.519 38.58 1.600 40.64 1.457 37.01 1.538 39.07 0.500 12.70 1.750 44.45 2,000

SP33028 M40 1 3/8” BSP 1.560 39.62 1.682 42.72 1.498 38.05 1.620 41.15 0.750 19.05 1.875 47.63 1,000

SP33029 M42 M45 1.630 41.40 1.765 44.83 1.568 39.63 1.703 43.26 0.750 19.05 1.937 49.19 1,000

SP33056 - - 1.670 42.42 1.816 46.13 1.608 40.84 1.722 43.74 1.375 34.93 2.000 50.80 3,500

SP33035 - - 1.807 45.90 1.824 46.33 1.745 44.32 1.762 44.75 1.375 9.53 2.000 50.80 1,000

SP33030 1 3/8” BSF 1 1/2” BSF 1.754 44.55 1.861 47.27 1.692 42.98 1.799 45.69 0.750 19.05 2.000 50.80 1,000

SP33036 - - 1.860 47.24 2.000 50.80 1.798 45.67 1.938 49.23 1.000 25.40 2.125 53.97 500

SP33032 1 1/2” BSF M52 1.900 48.26 2.076 52.73 1.838 46.69 2.014 51.16 1.000 25.40 2.250 57.15 1,000

SP33037 - - 1.990 50.55 2.132 54.15 1.928 48.97 2.070 52.58 1.000 25.40 2.250 57.15 750

SP33038 - - 2.043 51.89 2.147 54.53 1.981 50.32 2.085 52.96 0.750 19.05 2.313 58.75 1,000

SP33039 1 5/8” BSP M55 2.090 53.09 2.243 56.97 2.028 51.51 2.181 55.40 1.000 25.40 2.438 61.93 500

SP33040 M58 2” BSP 2.170 55.12 2.312 58.72 2.108 53.54 2.250 57.15 1.000 25.40 2.563 65.10 500

SP33043 2” BSP M60 2.337 59.36 2.464 62.59 2.275 57.79 2.402 61.01 1.000 25.40 2.625 66.68 500

SP33048 - - 2.680 68.07 2.790 70.87 2.618 66.50 2.728 69.29 0.750 19.05 2.938 74.63 500

SP33049 - 2 1/2” BSP 2.757 70.03 2.984 75.79 2.695 68.45 2.922 74.22 1.000 25.40 3.125 79.38 250

SP33050 - - 2.892 73.46 2.980 75.69 2.830 71.88 2.918 74.12 0.750 19.05 3.250 82.55 250

SP33051 2 1/2” BSP - 3.037 77.14 3.150 80.01 2.975 75.57 3.098 78.69 0.750 19.05 3.375 85.73 250

SP33052 - - 3.025 76.84 3.245 82.42 2.963 75.26 3.183 80.85 1.000 25.40 3.375 85.73 400

Back to Contents

Page 6: Standard Parts Catalogue

6

Tapered Caps and Plugs

T Series Red LD Polythene Part Number

To Plug Thread sizes

NPT Stan- BSP dard Metric

To Cap Thread Sizes

NPT Stan- BSP dard Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

T01-01 - 10/32 M5 - - M2/2.5 .116 2.95 .182 4.62 .055 1.35 .120 3.05 .38 9.65 .31 7.87 1,000

T02-02 - 1/4 M6 - - M3/3.5 .173 4.39 .240 6.10 .111 2.82 .177 4.50 .38 9.65 .38 9.65 1,000

T03 - - - - - M4 .210 5.33 .275 6.99 .146 3.71 .211 5.36 .34 8.64 .45 11.43 2,000

T04 - - M7 - - M4.5 .209 5.31 .269 6.83 .150 3.81 .210 5.33 .34 8.64 .38 9.65 3,000

T05 - 5/16 M8X1 - - M5 .236 5.99 .302 7.67 .174 4.42 .240 6.10 .38 9.65 .44 11.18 1,000

T06 - - - - - M6 .267 6.78 .335 8.51 .205 5.21 .273 6.93 .36 9.65 .47 11.94 1,000

T07 - 3/8 M10X1.25 - 5/16 M7 .299 7.59 .365 9.27 .235 5.97 .302 7.67 .38 9.65 .50 12.70 1,000

T08 1/8 - - - - - .330 8.38 .396 10.06 .267 6.78 .333 8.46 .38 9.65 .53 13.46 1,000

T09 - 7/16 M12 - - M8X1 .361 9.17 .427 10.85 .298 7.57 .365 9.27 .38 9.65 .56 14.22 1,000

T11 - - M12X1.25 - 3/8 - .390 9.91 .456 11.58 .327 8.31 .394 10.01 .38 9.65 .59 14.99 1,000

T12 1/4 1/2 M14 1/8 - M10x1.25 .419 10.64 .485 12.32 .356 9.04 .422 10.72 .38 9.65 .63 16.00 1,000

T13 - - M14x1.5 - 7/16 - .447 11.35 .513 13.03 .385 9.78 .451 11.46 .38 9.65 .66 16.76 1,000

T14 - 9/16 - - 1/2 - .477 12.12 .547 13.89 .415 10.54 .485 12.32 .31 7.87 .69 17.53 1,500

T15 - 9/16 - - 1/2 - .471 11.96 .547 13.89 .409 10.39 .485 12.32 .44 11.18 .69 17.53 1,000

T16 - - M16 - - M12x1.25 .500 12.70 .576 14.63 .440 11.18 .516 13.11 .44 11.18 .72 18.29 1,000

T17 - 5/8 - 1/4 - - .532 13.51 .608 15.44 .469 11.89 .545 13.84 .44 11.18 .75 19.05 1,000

T18 - - - - - - .554 14.07 .612 15.55 .490 12.45 .551 14.00 .31 7.87 .75 19.05 1,000

T19 3/8 - M18 - 9/16 - .550 13.97 .631 16.03 .487 12.37 .568 14.43 .47 11.94 .75 19.05 1,000

T20 - - M18x1.5 - 5/8 M14x1.5 .580 14.73 .667 16.94 .518 13.16 .605 15.37 .50 12.70 .81 20.57 1,000

Back to Contents

These tapered caps can be used as either a cap or a plug and are flexible and easy to install and remove. They also make an ideal paint mask. Available as special order in thermoplastic rubber – please state your requirements at time of ordering. Applicable spec: NAS-834 (MIL-C- 5501/7, MIL-C-52078)

Page 7: Standard Parts Catalogue

7

Tapered Caps and Plugs (continued from previous page)

T Series Red LD Polythene Part Number

To Plug Thread sizes

NPT Stan- BSP dard Metric

To Cap Thread Sizes

NPT Stan- BSP dard Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

T21 - - - - - - .610 15.49 .695 17.65 .549 13.94 .634 16.10 .50 12.70 .84 21.34 1,000

T22 - 3/4 M20 - - - .640 16.26 .727 18.47 .578 14.68 .664 16.87 .50 12.70 .88 22.35 1,000

T23 - - M20x1.5 3/8 - M16x1.5 .675 17.15 .755 19.18 .613 15.57 .693 17.60 .50 12.70 .88 22.35 1,000

T24 1/2 - M22 - - - .690 17.53 .788 20.02 .628 15.95 .726 18.44 .56 14.22 .94 23.88 1,000

T26 - - M22x1.5 - 3/4 - .725 18.42 .823 20.91 .663 16.84 .761 19.33 .56 14.22 .97 24.64 1,000

T27 - 7/8 M24 - - M18x1.5 .750 19.05 .848 21.54 .687 17.45 .785 19.94 .56 14.22 1.00 25.40 1,000

T28 - 15/16 M24x2 1/2 - - .802 20.37 .911 23.14 .740 18.80 .849 21.57 .63 16.00 1.06 26.93 1,000

T29 - 1 - - 7/8 M20x1.5 .815 20.70 .930 23.62 .753 19.13 .868 22.05 .63 16.00 1.09 27.69 1,000

T30 3/4 - - - - - .854 21.69 .958 24.33 .790 20.07 .894 22.71 .66 16.76 1.13 28.70 500

T31 3/4 - M27 - - - .869 22.07 .973 24.71 .805 20.45 .909 23.09 .75 19.05 1.13 28.70 500

T32 3/4 - - - - - .866 22.00 .975 24.77 .803 20.40 .912 23.17 .63 16.00 1.13 28.70 1,000

T34 - 1-1/16 M27x2 - - M22x1.5 .915 23.24 1.040 26.42 .855 21.72 .980 24.89 .69 17.53 1.16 29.46 1,000

T33 - - - - - - .960 24.38 1.047 26.59 .900 22.86 .987 25.07 .50 12.70 1.19 30.23 1,000

T37 - - - - - - .950 24.13 1.090 27.69 .890 22.61 1.030 26.16 1.03 26.16 1.25 31.75 300

T38 - - - 3/4 - M24x2 .964 24.49 1.090 27.69 .901 22.89 1.027 26.09 .75 19.05 1.25 31.75 500

T39 - - - - - - .975 24.77 1.104 28.04 .918 23.32 1.047 26.59 .75 19.05 1.44 36.58 400

T40 - - M30x2 - 1-1/16 - .995 25.27 1.145 29.08 .933 23.70 1.083 27.51 .75 19.05 1.31 33.28 500

T41 1 1-1/4 M33 - - M27x2 1.094 27.79 1.215 30.86 1.031 26.19 1.152 29.26 .75 19.05 1.41 35.82 500

T42 - - - - - - 1.175 29.90 1.284 32.60 1.113 28.30 1.222 31.00 .63 16.00 1.44 36.60 500

T43 - - - - - - 1.175 29.85 1.284 32.61 1.113 28.27 1.222 31.04 .66 16.76 1.67 42.42 400

T44 - 1-5/16 M33x2 - - - 1.179 29.95 1.286 32.66 1.115 28.32 1.222 31.04 .75 19.05 1.44 36.58 300

T45 - - - - - - 1.276 32.41 1.312 33.32 1.155 29.32 1.190 32.23 .56 14.20 1.38 35.05 400

T46 - - - - - M30x2 1.224 31.09 1.355 34.42 1.161 29.49 1.292 32.82 .75 19.05 1.50 38.10 500

T47 - - M36x3 1 1-5/16 - 1.235 31.37 1.360 34.55 1.173 29.80 1.298 32.97 .81 20.57 1.50 38.10 500

T48 - - - - - - 1.292 32.82 1.356 34.44 1.231 31.27 1.295 32.89 .75 19.05 1.50 38.10 330

T49 - 1-1/2 - - - - 1.312 33.33 1.465 37.21 1.249 3.173 1.402 35.61 .88 22.35 1.63 41.40 500

Back to Contents

Page 8: Standard Parts Catalogue

8

Tapered Caps and Plugs (continued from previous page)

T Series Red LD Polythene Part Number

To Plug Thread sizes

NPT Stan- BSP dard Metric

To Cap Thread Sizes

NPT Stan- BSP dard Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

T50 - - M39x3 - - M33x2 1.312 33.32 1.465 37.21 1.248 31.70 1.401 35.59 .75 19.05 1.62 41.15 300

T51 - - - - - - 1.435 36.45 1.500 38.10 1.340 34.04 1.420 36.07 .80 20.32 1.75 44.45 200

T52 - - - - - - 1.344 34.14 1.507 38.28 1.282 32.56 1.445 36.70 .94 23.88 1.77 44.96 200

T53 - 1-9/16 - - - - 1.447 36.76 1.600 40.64 1.384 35.15 1.537 39.04 .88 22.35 1.75 44.45 200

T54 1-1/4 - - - - M36x3 1.451 36.86 1.601 40.67 1.387 35.23 1.537 39.04 .75 19.05 1.75 44.45 200

T55 - 1-5/8 - - - - 1.519 38.58 1.602 40.69 1.455 36.96 1.538 39.07 .75 19.05 1.75 44.45 360

T56 - - - 1-1/4 1-5/8 M39x3 1.560 39.63 1.682 42.72 1.498 38.05 1.620 41.15 .75 19.05 1.88 47.75 200

T57 - - - 1-1/4 1-5/8 - 1.574 39.98 1.688 42.88 1.514 38.46 1.628 41.35 .62 15.75 1.88 47.75 1,000

T58 - - - - - - 1.633 41.48 1.750 44.45 1.569 39.85 1.690 42.82 .75 19.05 1.84 46.74 200

T59 1-1/2 1-7/8 - - - - 1.720 43.69 1.850 46.99 1.664 42.27 1.794 45.57 .75 19.05 2.03 51.56 700

T60 1-1/2 1-7/8 - - - - 1.750 44.45 1.880 47.75 1.688 42.88 1.818 46.18 .75 19.05 2.00 50.80 200

T61 - - - 1-1/2 1-7/8 - 1.780 45.21 1.950 49.53 1.718 43.64 1.888 47.96 1.00 25.40 2.13 54.10 200

T62 - - - - - - 1.865 47.37 1.975 50.17 1.785 45.34 1.895 48.13 .67 17.02 2.38 60.45 500

T63 - - - - - - 1.844 46.84 2.000 50.80 1.781 45.24 1.938 49.23 1.00 25.40 2.13 54.10 200

T65 - - - - - - 1.900 48.26 2.076 52.73 1.837 46.66 2.013 51.13 1.00 25.40 2.25 57.15 500

T67 - - - - - - 1.975 50.17 2.132 54.15 1.913 48.59 2.070 52.58 1.00 25.40 2.25 57.15 200

T68 - - - - - - 2.020 51.31 2.100 53.34 2.060 52.32 2.140 54.36 .38 9.65 2.59 65.79 200

T69 - - - - - - 2.015 51.18 2.147 54.54 1.953 49.61 2.085 52.96 .75 19.05 2.31 58.68 200

T70 - 2-1/4 - - - - 2.067 52.50 2.243 56.97 2.005 50.93 2.181 55.40 1.00 25.40 2.44 61.98 200

T71 - - - - 2-1/4 - 2.136 54.25 2.312 58.72 2.074 52.68 2.250 57.15 1.00 25.40 2.56 65.03 200

T72 - - - - - - 2.280 57.91 2.400 60.96 2.216 56.29 2.336 59.33 .75 19.05 2.80 71.12 300

T73 - - - - - - 2.125 53.98 2.406 61.11 2.063 52.40 2.344 59.54 1.00 25.40 2.53 64.26 200

T74 - - - 2 - - 2.298 58.37 2.464 62.59 2.235 56.77 2.401 60.99 1.00 25.40 2.63 66.80 100

T75 - - - - - - 2.300 58.42 2.464 62.59 2.220 56.39 2.383 60.53 .75 19.05 2.66 67.56 400

T76 - - - - 2-1/2 - 2.395 60.84 2.602 66.09 2.333 59.26 2.540 64.52 1.03 26.16 2.81 71.38 100

T77 - - - - - - 2.480 62.99 2.644 67.16 2.418 61.42 2.582 65.59 .63 16.00 2.78 70.61 200

T78 - - - - - - 2.307 58.60 2.650 67.31 2.245 57.03 2.588 65.74 1.25 31.75 2.78 70.61 100

T79 - - - - - - 2.561 65.05 2.690 68.33 2.497 63.42 2.626 66.70 .75 19.05 2.88 73.15 100

Page 9: Standard Parts Catalogue

9

Tapered Caps and Plugs (continued from previous page)

T Series Red LD Polythene Part Number

To Plug Thread sizes

NPT Stan- BSP dard Metric

To Cap Thread Sizes

NPT Stan- BSP dard Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

T80 - - - - - - 2.457 62.41 2.750 69.85 2.395 60.84 2.688 68.28 1.00 25.40 2.88 73.15 100

T81 2-1/2 - - - - - 2.641 67.08 2.790 70.87 2.579 65.51 2.728 69.29 .75 19.05 2.94 74.68 100

T83 - 3 - - - - 2.849 72.37 2.980 75.69 2.787 70.79 2.918 74.12 .75 19.05 3.25 82.55 100

T84 M75,M76 - - 2-1/2 - - 2.760 70.11 2.990 75.95 2.685 68.20 2.947 74.86 1.00 25.40 3.13 79.51 100

T85 - - - - - - 2.975 75.57 3.103 78.82 2.915 74.04 3.041 77.24 .75 19.05 3.34 84.84 100

T86 - - - - - - 2.996 76.10 3.159 80.24 2.916 74.07 3.079 78.21 .47 11.94 3.41 86.61 100

T88 - - - - - - 2.982 75.75 3.245 82.43 2.912 73.97 3.175 80.65 1.00 25.40 3.38 85.86 100

T89 - - - - - - 3.090 78.49 3.370 85.60 3.020 76.71 3.300 83.82 1.00 25.40 3.50 88.90 100

T90 3 - - - - - 3.325 84.46 3.457 87.81 3.245 82.43 3.377 85.78 .75 19.05 3.63 92.21 50

T91 - - - 3 - - 3.270 83.06 3.562 90.48 3.200 81.28 3.492 88.70 1.13 28.70 3.69 93.73 50

T92 - - - - - - 3.470 88.14 3.600 91.44 3.410 86.62 3.540 89.92 .75 19.05 3.88 98.56 100

T93 - - - - - - 3.550 90.17 3.730 94.75 3.480 88.40 3.660 92.97 1.00 25.40 4.00 101.60 50

T94-63 - - - - - - 3.680 93.48 3.800 96.52 3.610 91.70 3.730 94.75 .75 19.05 4.00 101.60 50

T95-56 - - - - 3-1/2 - 3.790 96.27 3.920 99.57 3.710 94.24 3.840 97.54 .75 19.05 4.12 104.65 50

SP33063 - - - - - - 3.675 93.35 3.815 96.90 3.595 91.31 3.735 94.87 1.00 24.40 4.00 101.60 200

T96-59 - - - - 3-1/2 - 3.930 99.83 4.070 103.38 3.860 98.05 4.000 101.60 .75 19.05 4.38 111.26 50

SP33067 - - - - - - 3.932 99.87 4.128 104.85 3.868 98.25 4.065 103.25 1.12 28.58 4.25 107.95 200

T97 - - - - - - 4.020 102.11 4.140 105.16 3.940 100.08 4.070 103.38 .75 19.05 4.53 115.07 50

T98 - - - - 4 - 4.270 108.46 4.430 112.53 4.180 106.18 4.340 110.24 .88 22.35 4.88 123.96 50

T99 - - - - 4 - 4.370 110.00 4.620 117.35 4.290 108.97 4.540 115.32 1.00 25.40 5.00 127.01 50

TX100 - - - - - - 4.640 117.86 4.850 123.19 4.570 116.08 4.780 121.42 .88 22.35 5.25 133.36 50

TX101 - - - - - - 4.910 124.72 5.090 129.29 4.830 122.69 5.010 127.26 1.00 25.40 5.50 139.71 50

TX102 - - - - - - 5.330 135.39 5.490 139.45 5.210 132.34 5.370 136.40 .88 22.35 5.88 149.36 50

TX103 - - - - 5 - 5.470 138.94 5.620 142.75 5.390 136.91 5.540 140.72 1.00 25.40 6.13 155.71 50

TX104 - - - - - - 5.700 144.79 5.870 149.10 5.610 142.50 5.790 147.07 .98 24.89 6.25 158.76 50

TX105 - - - - - - 6.010 152.66 6.180 156.98 5.920 150.37 6.100 154.95 1.00 25.40 6.62 168.15 50

TX106 - - - - 6 - 6.400 162.57 6.560 166.63 6.330 160.79 6.490 164.85 .87 22.10 6.94 176.28 20

TX107 - - - - 6 - 6.610 169.90 6.710 170.44 6.530 165.87 6.630 168.41 1.50 38.10 7.19 182.63 20

Page 10: Standard Parts Catalogue

10

Tapered Caps and Plugs (continued from previous page)

T Series Red LD Polythene Part Number

To Plug Thread sizes

NPT Stan- BSP dard Metric

To Cap Thread Sizes

NPT Stan- BSP dard Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

TX108 - - - - - - 7.050 179.08 7.120 180.86 6.970 177.04 7.060 179.33 1.00 25.40 7.63 193.81 20

TX109 - - - - - - 7.340 186.44 7.650 194.32 7.260 184.41 7.560 192.03 1.00 25.40 7.94 201.68 20

TX110 - - - - - - 7.660 194.57 7.840 199.14 7.580 192.54 7.760 197.11 1.00 25.40 8.12 206.26 20

TX111 - - - - - - 7.970 202.45 8.140 206.76 7.880 200.16 8.050 204.48 1.00 25.40 8.38 212.86 20

TX112 - - - - - - 8.670 220.23 8.730 221.75 8.550 217.18 8.600 218.45 1.50 38.10 9.13 231.91 10

TX113 - - - - - - 9.970 253.24 10.220 259.59 9.820 249.43 10.080 256.03 .97 24.64 10.56 268.22 15

Back to Contents

Page 11: Standard Parts Catalogue

11

ElectricalConnector Caps

C Series Red LD Polythene

Part

Number

To Cap

Thread Size

NAS-813

A

Inches Metric

Dimensions C

Inches Metric

D

Inches Metric

Box

Quantity C02 1/2 -8 .480 12.19 .50 12.70 .54 13.72 1,000

C06 5/8 -10 .605 15.37 .50 12.70 .66 16.89 1,000

C08 3/4 -12 .720 18.39 .50 12.70 .77 19.68 1,000

C10 7/8 -14 .850 20.83 .50 12.70 .90 22.99 1,000

C12 1 -16 .973 24.71 .50 12.70 1.03 26.29 500

C14 1-1/8 -18 1.093 27.76 .56 14.22 1.15 29.35 500

C16 1-3/16 - 1.188 30.18 .56 14.22 1.23 31.24 500

C18 1-1/4 -20 1.231 31.27 .56 14.22 1.30 33.05 500

C20 1-3/8 -22 1.340 34.04 .56 14.22 1.41 35.81 500

C22 1-7/16 - 1.428 36.27 .56 14.22 1.46 37.08 200

C24 1-1/2 -24 1.463 37.16 .56 14.22 1.53 38.94 500

C26 1-3/4 -28 1.715 43.56 .56 14.22 1.79 45.47 200

C28 2 -32 1.965 49.91 .56 14.22 2.04 51.82 200

C30 2-1/4 -36 2.215 56.26 .60 15.24 2.29 58.17 200

C32 2-1/2 -40 2.456 62.38 .62 15.75 2.52 64.01 200

C34 2-3/4 - 2.720 69.09 .60 15.24 2.81 71.42 100

C36 3 - 2.960 75.18 .60 15.24 3.05 77.47 100

C38 4 - 3.940 100.08 1.00 25.40 4.00 101.60 40

C40 5 - 4.944 125.58 1.25 31.75 5.00 127.00 30

Back to Contents

Straight-sided, thin-wall closures designed to protect threaded connectors. Flanged end allows removal in hard-to-reach areas. Versatile design protects a variety of threaded and non-threaded applications. Applicable Spec: NAS-813 MS-90376

Page 12: Standard Parts Catalogue

12

Electrical Connector Plugs

E Series Yellow LD Polythene

Part

Number

Standard

Thread Size

NAS-820

A

Inches Metric

B

Inches Metric

C

Inches Metric

D

Inches Metric

Box

Quantity

E02 1/2 -8A .483 12.27 .41 10.41 .63 16.00 .67 17.02 1,000

E06 5/8 -10A .595 15.11 .53 13.46 .63 16.00 .75 19.05 1,000

E10 3/4 -12A .715 18.16 .66 16.76 .63 16.00 .86 21.84 1,000

E12 7/8 -14A .845 21.46 .79 20.07 .63 16.00 1.03 26.16 1,000

E14 1 -16A .963 24.46 .89 22.61 .63 16.00 1.12 28.45 1,000

E16 1-1/8 -18A 1.088 27.64 1.03 26.16 .63 16.00 1.25 31.75 500

E18 1-1/4 -20A 1.215 30.86 1.15 29.21 .63 16.00 1.40 35.56 500

E20 1-3/8 -22A 1.349 34.26 1.289 32.74 .63 16.00 1.50 38.10 300

E22 1-1/2 -24A 1.460 37.08 1.39 35.31 .55 13.97 1.64 41.66 200

E24 1-3/4 -28A 1.718 43.64 1.68 42.67 .63 16.00 1.87 47.49 200

E26 2 -32A 1.970 50.04 1.89 48.01 .63 16.00 2.13 54.10 200

E28 2-1/4 -36A 2.210 56.13 2.14 54.36 .63 16.00 2.34 59.44 200

E30 2-1/2 - 2.450 62.23 2.38 60.45 .63 16.00 2.60 66.04 200

Back to Contents

Straight-sided, thin-wall closures designed to protect threaded connectors. Flanged

end makes for easy removal in hard-to reach areas. Versatile design will protect a

variety of threaded and non-threaded applications.

Applicable Spec: NAS-820

Page 13: Standard Parts Catalogue

13

Non-Threaded Caps and Plugs Wide-Flange

WF Series Yellow LD Polythene Part Number

NPT/ BSP

To Plug Thread sizes

Inches Metric

NPT/ BSP

To Cap Thread Sizes

Inches Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

WF01 - - - - - - .116 2.95 .182 4.62 .053 1.35 .120 3.05 .37 9.40 .50 12.70 1,000

WF02 - - M6 - - M4 .173 4.39 .240 6.10 .111 2.82 .177 4.50 .37 9.40 .56 14.22 1,000

WF03 - - - - - - .236 5.99 .296 7.52 .174 4.42 .225 5.72 .31 7.87 .62 15.75 1,000

WF04 - 3/8 - - 15/64 - .299 7.59 .365 9.27 .235 5.97 .302 7.67 .31 7.87 .68 17.27 1,000

WF05 1/8 - M10 - - M8 .333 8.46 .392 9.96 .269 6.83 .319 8.10 .31 7.87 .72 18.29 1,000

WF06 - 7/16 - - - - .367 9.32 .418 10.62 .298 7.57 .354 8.99 .31 7.87 .75 19.05 1,000

WF07 - - M12 1/8 3/8 M10 .397 10.08 .447 11.35 .328 8.33 .383 9.73 .31 7.87 .78 19.81 1,000

WF08 1/4 1/2 - 1/8 - - .427 10.85 .475 12.07 .356 9.04 .409 10.39 .31 7.87 .81 20.57 1,000

WF09 - - - - - - .435 11.05 .509 12.93 .365 9.27 .450 11.43 .47 11.94 .83 21.08 2,000

WF09-2 - - M14 - 7/16 - .460 11.68 .500 12.70 .396 10.06 .444 11.28 .38 9.65 .75 19.05 1,200

WF10 - 9/16 - - 1/2 M12 .481 12.22 .547 13.89 .409 10.39 .493 12.52 .37 9.40 .87 22.10 1,000

WF11 - 5/8 M16 1/4 - - .530 13.46 .615 15.62 .468 11.89 .547 13.89 .37 9.40 .94 23.88 1,000

WF11-2 3/8 - - - 9/16 M14 .560 14.22 .631 16.03 .497 12.62 .579 14.71 .47 11.94 .97 24.64 1,300

WF12 - - M18 - 5/8 M16 .590 14.99 .667 16.94 .518 13.16 .605 15.37 .44 11.18 1.00 25.40 1,000

WF13 - - - - - - .610 15.49 .687 17.45 .548 13.92 .635 16.13 .44 11.18 1.03 26.16 1,000

WF14 - 3/4 M18-M20 - - - .628 15.95 .725 18.42 .558 14.17 .667 16.81 .44 11.18 1.06 26.92 1,000

Engineered with wider and thicker flange design for added protection and security. This versatile

part can be used as a cap or plug.

When used as plug “B” dimension should be at least .020” larger than diameter to be plugged .

Larger diameters may require more interference.

When used as a cap “C” dimension should be at least .020” less than diameter to be capped.

Larger diameters may require more interference.

Applicable Spec: NAS-816

Page 14: Standard Parts Catalogue

14

Non-Threaded Caps and Plugs Wide-Flange (continued from previous page)

WF Series Yellow LD Polythene Part Number

NPT/ BSP

To Plug Thread sizes

Inches Metric

NPT/ BSP

To Cap Thread Sizes

Inches Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

WF15 - - M20 3/8 - - .658 16.71 .750 19.05 .588 14.94 .687 17.45 .44 11.18 1.09 27.69 1,000

WF16 1/2 - - - - M18 .690 17.53 .775 19.69 .620 15.75 .721 18.31 .47 11.94 1.12 28.45 1,000

WF17 - - M22 - 3/4 - .725 18.42 .812 20.62 .663 16.84 .761 19.33 .50 12.70 1.16 29.46 1,000

WF18 - - - - - - .755 19.18 .870 22.10 .693 17.60 .808 20.52 .50 12.70 1.18 29.97 1,000

WF19 - - - - 7/8 - .820 20.83 .930 23.62 .755 19.18 .865 21.97 .53 13.46 1.25 31.75 500

WF20 - - - - - - .825 20.96 .929 23.60 .763 19.38 .878 22.30 .56 14.22 1.25 31.75 500

WF21 3/4 - - - - M22 .866 22.00 .976 24.79 .804 20.42 .925 23.50 .65 16.51 1.81 45.97 500

WF22 3/4 1-1/16 M26,M27 5/8 - M24 .915 23.24 1.035 26.29 .840 21.34 .960 24.38 .63 16.00 1.34 34.04 500

WF23 - - - - - - .984 24.99 1.105 28.07 .918 23.34 1.040 26.42 .66 16.76 1.44 36.58 500

WF24-2 7/8 - M25 - - M27,M28 1.150 29.21 1.284 32.61 1.080 27.43 1.220 30.99 .75 19.05 1.56 39.62 300

WF25 1 1-5/16 M32,M33 7/8 - M30 1.180 29.97 1.314 33.38 1.115 28.32 1.260 32.00 .75 19.05 1.56 39.62 300

WF26 - - M35,M36 - - M32, M33 1.236 31.39 1.382 35.10 1.166 29.62 1.324 33.63 .75 19.05 1.69 42.93 300

WF27 - - - - - - 1.312 33.32 1.465 37.21 1.248 31.70 1.417 35.99 .93 23.62 1.84 46.74 200

WF27-2 - - - - - - 1.312 33.32 1.466 37.24 1.249 31.72 1.427 36.25 .78 19.81 1.84 46.74 200

WF28 - - - - - - 1.452 36.88 1.604 40.74 1.378 35.00 1.552 39.42 .75 19.05 1.95 49.28 200

WF29 1-1/4 - M39,M40,M42 - 1-1/8 M38 1.580 40.13 1.714 43.54 1.515 38.48 1.649 41.88 .63 19.05 2.06 52.32 200

WF30 1-1/2 1-7/8 M48 - - M45 1.730 43.94 1.888 47.96 1.650 41.91 1.828 46.43 .75 19.05 2.31 58.67 100

WF31 - - M48 1-1/2 1-7/8 - 1.810 45.97 1.975 50.17 1.731 43.97 1.916 48.67 .75 19.05 2.38 60.45 100

1064 - - - - - - 1.900 48.26 1.990 50.55 1.780 45.21 1.870 47.50 .57 14.48 2.34 59.44 500

WF32 - - - 1-1/2 - - 1.850 46.99 2.020 51.31 1.788 45.42 1.973 50.11 1.12 28.45 2.44 61.98 100

WF33 - - - - - - 1.927 48.95 2.058 52.27 1.857 47.17 1.988 50.50 .63 16.00 2.38 60.45 200

WF34 - 2-1/4 M55,M56 1-3/4 - M52 2.067 52.50 2.243 56.97 2.005 50.93 2.197 55.80 1.12 28.45 2.69 68.33 200

WF34-2 - - - - - - 2.072 52.63 2.263 57.48 2.010 51.05 2.218 56.34 1.12 28.45 2.69 68.33 50

WF35 2 - M58,M60 - 2-1/4 M58 2.136 54.25 2.312 58.72 2.074 52.68 2.265 57.53 1.12 28.45 2.75 69.85 50

WF36 - - M60,M62 2 - M60 2.298 58.37 2.464 62.59 2.235 56.77 2.416 61.37 1.12 28.45 2.88 73.15 50

WF37 - - - - 2-1/2 - 2.395 60.83 2.602 66.09 2.333 59.26 2.556 64.92 1.25 31.75 3.00 76.20 50

WF38 - - - - - - 2.305 58.55 2.620 66.55 2.245 57.02 2.583 65.61 1.00 25.40 3.06 77.72 60

Page 15: Standard Parts Catalogue

15

Non-Threaded Cap and Plugs Wide-Flange (continued from previous page)

WF Series Yellow LD Polythene Part Number

NPT/ BSP

To Plug Thread sizes

Inches Metric

NPT/ BSP

To Cap Thread Sizes

Inches Metric

Dimensions

A B C D E F PLUG CAP Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric Inches Metric

Bag Quantity

WF39 - - - - - - 2.475 62.87 2.725 69.22 2.405 61.09 2.677 68.00 1.37 34.80 3.16 80.26 50

WF40 2-1/2 - - - - - 2.638 67.01 2.759 70.08 2.568 65.23 2.704 68.68 .81 20.57 3.21 81.53 50

WF41 - - M75,M76 2-1/2 - - 2.685 68.20 2.955 75.06 2.623 66.62 2.917 74.09 1.12 28.45 3.44 87.38 50

WF42 - - - - - - 2.994 76.05 3.150 80.01 2.924 74.27 3.097 78.66 .87 22.10 3.59 91.19 250

WF43 - - - - - - 2.990 75.95 3.250 82.55 2.920 74.17 3.202 81.33 1.12 28.45 3.75 95.25 50

WF44 - - - - - - 3.225 81.92 3.562 90.47 3.154 80.11 3.515 89.28 1.25 31.75 4.00 101.60 150

WF45 - - - - - - 3.324 84.43 3.458 87.83 3.244 82.40 3.398 86.31 .87 22.10 3.88 98.55 40

WF52 3-1/2 - - 3-1/2 - - 3.347 85.01 3.486 88.54 3.265 82.93 3.418 86.82 .87 22.10 3.91 99.31 40

WF46 3-1/2 - - 3-1/2 - - 3.790 96.27 3.920 99.57 3.710 94.23 3.840 97.54 .75 19.05 4.34 110.24 50

Back to Contents

Page 16: Standard Parts Catalogue

16

Interrupted-Bead Plugs

IB Series Black LD Polythene

Part

Number

To Plug NPT Thread

Size

To Plug SEA Thread

Size

Dimensions Box

Quantity A

Inches Metric C

Inches Metric

IB 6 1/8 3/8 8.05 .317 6.10 .24 1,000

IB 7 - 7/16 9.40 .370 6.86 .27 1,000

IB 8 1/4 1/2 11.28 .444 6.86 .27 1,000

IB 9 - 9/16 12.70 .500 7.37 .29 1,000

IB 10 3/8 5/8 14.17 .558 7.37 .29 1,000

IB 12 - 3/4 17.30 .681 7.37 .29 1,000

IB 14 - 7/8 20.24 .797 7.37 .29 1,000

IB 16 3/4 1 23.32 .918 6.35 .25 1,000

IB 17 - 1-1/16 24.74 .974 6.35 .25 900

Back to Contents

All the advantage of a threaded plug without the threading

action. Snaps into fittings to seal out contaminants and

provide an attractive finish. Interrupted external bead grips

threads yet strips out without shredding

Page 17: Standard Parts Catalogue

17

Non-Threaded Caps Tube Caps

Tube Caps Red LD Polythene

Part

Number

To Cap Diameter A

Dimensions C

Box

Quantity Inches Metric Inches Metric 211-B 1/8 3.10 .625 15.90 1,000

211-L 1/8 3.18 .75 19.05 5,000

212-C 5/32 3.90 .625 15.90 800

212-S 11/64 4.37 .62 15.75 2,000

213-S 3/16 4.78 .47 11.94 5,000

213-D 3/16 4.70 .625 15.90 800

213-R 13/64 5.16 .62 15.75 3,000

214-S 1/4 6.35 .50 12.70 3,000

214-E 1/4 6.30 .875 22.20 900

1805 5/16 7.92 .38 9.65 3,600

215-F 5/16 7.80 .875 22.20 1,200

216-T 3/8 9.53 .46 11.68 4,000

216-H 3/8 9.53 .888 22.35 1,000

216-L 3/8 9.53 1.12 28.45 1,500

1030 27/64 10.72 1.25 31.75 1,000

773 7/16 11.11 .22 5.59 3,000

1031 7/16 11.11 .50 12.70 1,000

217 7/16 11.11 .88 22.35 1,000

Designed to protect the ends of threaded and non-threaded tubing, rods or packaging tubes

with a friction-fit straight-walled design. Will fit diameters matching inside dimensions

where applicable. Used extensively for masking during painting, plating and sandblasting

operations.

Available in various lengths.

Applicable spec: MIL-C-5501/9, MIL-C-52078, NAS 844

Page 18: Standard Parts Catalogue

18

Non-Threaded Caps Tube Caps (continued from previous page)

Tube Caps Red LD Polythene

Part

Number

To Cap Diameter A

Dimensions C

Box

Quantity Inches Metric Inches Metric 217-L 7/16 11.11 1.5 38.10 1,000

218-S 1/2 12.70 .50 12.70 1,000

218 1/2 12.70 .88 22.35 1,000

219-S 9/16 14.27 .62 15.75 1,500

219 9/16 14.29 .88 22.35 1,000

220 5/8 15.88 .88 22.35 1,000

981 5/8 15.88 .88 22.35 1,000

220-U 5/8 15.88 1.50 38.10 400

1834 5/8 15.88 2.50 63.50 200

220-H 5/8 15.88 .94 23.88 1,000

221 11/16 17.46 .88 22.35 1,000

221-S 11/16 17.48 .75 19.05 1,000

222-S 3/4 19.05 .38 9.65 1,500

222 3/4 19.05 .88 22.35 1,000

222-H 3/4 19.05 .94 23.88 500

222-L 3/4 19.05 2.47 62.74 800

835 13/16 20.65 .69 17.53 700

223 13/16 20.64 .88 22.35 1,000

201-T 7/8 22.23 .62 15.75 500

201-S 7/8 22.23 .62 15.75 700

201 7/8 22.23 .88 22.35 1,000

201-M 7/8 22.23 1.75 44.45 200

748 29/32 23.00 .75 19.05 500

1202 29/32 28.83 .88 22.35 500

1784 1 25.40 .50 12.70 700

2003 1 25.40 .50 12.70 700

Page 19: Standard Parts Catalogue

19

Non-Threaded Caps Tube Caps (continued from previous page)

Tube Caps Red LD Polythene

Part

Number

To Cap Diameter A

Dimensions C

Box

Quantity Inches Metric Inches Metric 1364 1 25.40 .62 15.75 400

138 1 25.40 .75 19.05 500

138-2 1 25.40 1.00 25.40 500

138-L 1 25.40 1.75 44.45 200

448 1-1/16 26.99 1.00 25.40 500

224 1-1/8 28.58 .88 22.35 300

289-S 1-1/4 31.75 .50 12.70 400

289 1-1/4 31.75 1.00 25.40 400

289-M 1-1/4 31.75 1.50 38.10 140

289-L 1-1/4 31.75 1.75 44.45 100

1783 1-5/16 33.34 1.00 25.40 200

760 1-3/8 35.00 .62 15.75 200

225 1-3/8 34.92 1.00 25.40 200

428 1-3/8 35.00 1.50 38.10 100

428-2 1-3/8 35.00 1.59 40.39 100

290 1-1/2 38.10 1.00 25.40 200

290-L 1-1/2 38.10 1.75 44.45 100

291 1-5/8 41.28 1.00 25.40 200

291-L 1-5/8 41.28 1.25 31.75 100

291-2 1-23/32 43.65 1.00 25.40 100

1008 1-3/4 44.45 .88 22.35 100

1008-1 1-3/4 44.45 1.00 25.40 200

291-3 1-27/32 46.84 1.21 30.73 100

1699 1-7/8 47.63 1.00 25.40 200

226 2 50.80 1.00 25.40 200

Page 20: Standard Parts Catalogue

20

Non-Threaded Caps Tube Caps (continued from previous page)

Tube Caps Red LD Polythene

Part

Number

To Cap Diameter A

Dimensions C

Box

Quantity Inches Metric Inches Metric 226-L 2 50.80 1.53 38.86 50

1025 2-1/8 53.98 .50 12.70 200

327 2-1/8 53.98 1.00 25.40 100

230 2-1/4 57.15 .88 22.35 100

1365 2-1/4 57.15 1.00 25.40 60

227 2-1/2 63.50 .88 22.35 100

372 2-39/64 66.27 1.00 25.40 200

374 2-5/8 66.68 1.00 25.40 100

232 2-3/4 69.85 1.00 25.40 100

387 3 76.20 1.00 25.40 90

373 3-1/8 79.38 1.38 35.05 50

1528 3-1/4 82.55 1.00 25.40 160

1563 3-7/16 87.31 1.00 25.40 140

1521 3-1/2 88.90 1.00 25.40 120

2215 3-17/32 89.69 2.00 50.80 60

1540 4 101.60 1.13 28.70 100

1400 4-13/16 122.25 .64 16.26 100

1363 4-7/8 123.83 .92 23.37 70

324-3 8 203.20 2.30 58.42 8

Back to Contents

Page 21: Standard Parts Catalogue

21

Non-Threaded Plugs Lift Tab Tapered Plugs

ST Series Red LD Polyethylene

Part Number

NPT/ BSP

To Plug Thread Sizes Standard Metric

Dimensions Box

Quantity A

Inches Metric B

Inches Metric C

Inches Metric D

Inches Metric ST236-X - - - .236 5.99 .302 7.67 .44 11.18 .38 9.65 1,000

ST236-L - - - .267 6.78 .335 8.51 .47 11.94 .38 9.65 1,000

ST237-Y - 3/8 M10/M10X1.25 .299 7.59 .365 9.27 .50 12.70 .38 9.65 1,000

ST229-Z 1/8 - - .330 8.38 .396 10.06 .53 13.46 .38 9.65 1,000

ST238-D - 7/16 M12 .361 9.17 .427 10.85 .56 14.22 .38 9.65 1,000

ST181 1/4 1/2 M14 .419 10.64 .485 12.32 .62 15.75 .38 9.65 1,000

ST240 - - M14X1.5 .447 11.35 .513 13.03 .66 16.76 .38 9.65 1,000

ST189 - 9/16 - .471 11.96 .547 13.89 .69 17.53 .44 11.18 1,000

ST189-2 - - - .500 12.70 .576 14.63 .72 18.29 .44 11.18 1,000

ST241 - - M16 .532 13.51 .608 15.44 .75 19.05 .44 11.18 1,000

ST188 3/8 - M18 .550 13.97 .631 16.03 .75 19.05 .47 11.94 1,000

ST242 - - M18X1.5 .580 14.73 .667 16.94 .81 20.57 .50 12.70 1,000

ST242-2 - - - .610 15.49 .695 17.65 .84 21.34 .50 12.70 1,000

ST243 - 3/4 M20 .643 16.33 .726 18.44 1.03 26.16 .50 12.70 1,000

ST191 - - M20X1.5 .675 17.15 .755 19.18 .88 22.35 .50 12.70 1,000

ST203 1/2 - M22 .690 17.53 .788 20.02 .94 23.88 .56 14.22 1,000

ST245 - - M22X1.5 .725 18.42 .823 20.91 .97 24.64 .56 14.22 1,000

This tapered plug features a side-tab design that extends above the flange making it easy to

grasp and remove from a variety of threaded and non-threaded fittings. Great for use in hard-

to-reach locations.

Page 22: Standard Parts Catalogue

22

Non-Threaded Plugs Lift Tab Tapered Plugs (continued from previous page)

ST Series Red LD Polyethylene

Part Number

NPT/ BSP

To Plug Thread Sizes

Dimensions Box

Quantity Standard Metric

A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

ST246 - 7/8 M24 .750 19.05 .848 21.54 1.00 25.40 .56 14.22 1,000

ST204 - - M24X2 .802 20.37 .911 23.14 1.06 26.93 .62 15.75 1,000

ST247 - - - .815 20.70 .930 23.62 1.09 27.69 .62 15.75 1,000

ST192-2 3/4 - M27 .866 21.99 .975 24.77 1.12 28.45 .62 15.75 1,000

ST248 - 1-1/16 M27X12 .915 23.24 1.040 26.42 1.16 29.47 .68 17.27 1,000

ST249 - - M30X2 .964 24.49 1.090 27.69 1.25 31.75 .75 19.05 500

ST153 - - M30X2 .995 25.27 1.145 29.08 1.31 33.28 .75 19.05 500

ST193 1 - M33 1.094 27.79 1.215 30.86 1.41 35.82 .75 19.05 500

ST250 - 1-5/16 M33X2 1.179 29.95 1.286 32.66 1.44 36.58 .75 19.05 300

ST205 - - - 1.235 31.37 1.360 34.55 1.50 38.10 .81 20.57 500

ST254 1-1/4 - M36X3 1.451 36.86 1.601 40.67 1.75 44.45 .75 19.05 200

ST255 - - - 1.633 41.48 1.750 44.45 1.84 46.74 .75 19.05 150

Back to Contents

Page 23: Standard Parts Catalogue

23

Non-Threaded Plugs Centre Pull-Tab Tapered Plugs

P Series Red LD Polyethylene

Part Number

NPT/ BSP

To Plug Thread Size Dimensions Box

Quantity Standard Metric

A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

235-VP - 5/16-24 M7 .209 5.31 .269 6.83 .38 9.65 .34 8.64 1,000

236-XP - - M8/M8X1 .239 6.07 .303 7.70 .47 11.94 .38 9.65 1,000

236-LP - - - .267 6.78 .335 8.51 .47 11.94 .41 10.41 1,000

237-YP - 3/8-24 M10/M10X1.25 .299 7.59 .367 9.32 .50 12.70 .38 9.65 1,000

229-ZP 1/8 - - .331 8.41 .397 10.08 .56 14.22 .38 9.65 1,000

238-DP - 7/16-20 M12 .362 9.19 .428 10.87 .56 14.22 .38 9.65 1,000

239-EP - - M12X1.25 .392 9.96 .459 11.66 .59 14.99 .41 10.41 1,000

181-P 1/4 1/2-20 M14 .422 10.72 .486 12.34 .62 15.75 .41 10.41 1,000

189-P - 9/16-18 - .472 11.99 .548 13.92 .69 17.53 .47 11.94 1,000

189-2-P - - M16 .500 12.70 .568 14.43 .72 18.29 .47 11.94 1,000

241-P - 5/8-18 - .533 13.54 .608 15.44 .75 19.05 .47 11.94 1,000

188-P 3/8 - M18 .550 13.97 .631 16.03 .75 19.05 .50 12.70 1,000

188-SP 3/8 - M18 .580 14.73 .625 15.88 .78 19.81 .22 5.59 1,000

242-P - - M18X1.5 .580 14.73 .688 17.48 .84 21.34 .53 13.46 1,000

242-2-P - - - .610 15.49 .695 17.65 .84 21.34 .53 13.46 1,000

243-P - 3/4-16 M20 .640 16.26 .727 18.47 .88 22.35 .50 12.70 1,000

191-P - - M20X1.5 .678 17.22 .755 19.18 .88 22.35 .53 13.46 1,000

This tapered plug features a well-engineered centre-pull tab that extends above the flange

area, making it easy to grasp and remove from a variety of threaded and non-threaded

ports. Ideal for fittings with internal o-rings. Centre-pull tab will not break off during

removal.

Page 24: Standard Parts Catalogue

24

Non-Threaded Plugs Centre Pull-Tab Tapered Plugs (continued from previous page)

P Series Red LD Polyethylene

Part Number

NPT/ BSP

To Plug Thread Size Dimensions Box

Quantity Standard Metric

A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

203-P 1/2 - M22 .690 17.53 .788 20.02 .94 23.88 .59 14.99 1,000

203-SP 1/2 - M22 .725 18.42 .770 19.56 .86 21.84 .22 5.59 1,000

245-P - - M22X1.5 .727 18.47 .825 20.96 1.00 25.40 .59 14.99 1,000

246-P - 7/8-14 M24 .752 19.10 .849 21.56 1.00 25.40 .59 14.99 1,000

204-P - - M24X2 .803 20.40 .912 23.16 1.06 26.92 .66 16.76 500

192-1-P 3/4 - M27 .869 22.07 .973 24.71 1.12 28.45 .75 19.05 500

192-2-P 3/4 - M27 .869 22.07 .973 24.71 1.12 28.45 .66 16.76 500

248-P - 1-1/16-12 M27X2 .915 23.24 1.040 26.42 1.16 29.46 .72 18.29 1,000

249-P - - M30 .967 24.56 1.092 27.74 1.25 31.75 .78 19.81 300

153-P - - M30X2 1.026 26.06 1.146 29.11 1.34 34.04 .75 19.05 300

193-P 1 - M33 1.093 27.76 1.219 30.96 1.41 35.81 .78 19.81 300

193-SP 1 - M33 1.100 27.94 1.210 30.73 1.34 34.04 .50 12.70 500

250-P - 1-5/16-12 M33X2/M36 1.179 29.95 1.286 32.66 1.44 36.58 .75 19.05 300

205-P - - - 1.235 31.37 1.360 34.54 1.53 38.86 .75 19.05 200

252-P - - - 1.292 32.82 1.356 34.44 1.50 38.10 .78 19.81 300

253-P - - M39/M39X3 1.312 33.32 1.465 37.21 1.62 41.15 .75 19.05 200

253-1-P - - - 1.344 34.14 1.527 38.79 1.75 44.45 .88 22.35 200

381-P - - - 1.360 34.54 1.420 36.07 1.72 43.69 .53 13.46 300

254-P 1-1/4 - - 1.451 36.86 1.601 40.67 1.75 44.45 .75 19.05 200

255-P - - - 1.633 41.48 1.750 44.45 1.94 49.28 .78 19.81 200

206-P - - - 1.807 45.90 1.785 45.31 1.94 49.28 .50 12.70 200

273-P - - - 1.735 44.07 1.815 46.10 2.81 71.37 .50 12.70 700

197-P 1-1/2 - - 1.820 46.23 1.835 46.61 2.03 51.56 .50 12.70 200

Page 25: Standard Parts Catalogue

25

Non-Threaded Plugs Centre Pull-Tab Tapered Plugs (continued from previous page)

P Series Red LD Polyethylene

Part Number

NPT/ BSP

To Plug Thread Size Dimensions Box

Quantity Standard Metric

A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

260-P - 2-1/4-12 - 2.067 52.50 2.243 56.97 2.44 61.98 1.03 26.16 70

198-P 2 - - 2.230 56.64 2.270 57.66 2.50 63.50 .50 12.70 200

207-P - 2-1/2-12 - 2.300 58.42 2.464 62.59 2.66 67.56 1.00 25.40 50

199-P 2-1/2 - - 2.698 68.53 2.866 72.80 2.97 75.44 .50 12.70 100

268-P - - - 2.850 72.39 2.982 75.74 3.28 83.31 .75 19.05 50

200-P 3 - - 3.320 84.33 3.452 87.68 3.62 91.95 .75 19.05 50

Back to Contents

Page 26: Standard Parts Catalogue

26

Cap for Threaded Parts BSP/Gas Caps

SP26000 Series Red LD Polythene

Part

Number

A Overall Length

Inches Metric

B Overall Length

Inches Metric

Tread Size

BSP

Bag

Quantity

SP26001 - 9.50 - 12.90 1/8 10,000

SP26002 0.437 11.10 0.642 14.70 1/4 10,000

SP26003 0.437 11.10 0.780 19.00 3/8 10,000

SP26004 0.531 12.70 0.957 24.60 1/2 5,000

SP26005 0.625 15.70 1.034 25.00 5/8 5,000

SP26006 0.718 18.20 1.173 28.50 3/4 4,000

SP26007 0.750 19.05 1.321 33.55 7/8 2,500

SP26008 0.750 19.80 1.441 38.10 1” 2,000

SP26009 - 20.00 - 44.60 1 1/4 1,000

SP26010 - 50.00 - 28.00 1 1/2 1,500

SP26011 0.843 21.10 2.539 62.20 2” 1,000

SP26012 1.000 25.40 2.779 70.59 2 1/4 500

SP26013 1.125 27.40 3.162 78.00 2 1/2 500

Back to Contents

A full threaded design used in the automotive, gas, hydraulic,

aerospace, pneumatic and engineering industries as a shipping cap

and to prevent the ingress of dirt and other contaminants.

Page 27: Standard Parts Catalogue

27

Caps for Threaded Parts UNF/JIC Fittings - Caps

SP27000 Red LD Polythene

Part

Number

A Overall Length

Inches Metric

B Overall

Diameter Inches Metric

Thread Size

UNF

Bag

Quantity

SP27002 0.328 8.33 0.503 12.78 3/8 – 24 5,000

SP27003 0.325 8.33 0.565 14.35 7/16 – 24 5,000

SP27004 0.531 13.49 0.565 14.35 7/16 – 20 5,000

SP27006 0.531 13.49 0.699 17.75 9/16 – 18 5,000

SP27007 0.593 15.06 0.762 19.35 5/8 – 18 5,000

SP27008 0.687 17.45 0.887 22.53 3/4 – 16 5,000

SP27010 0.812 20.62 1.012 25.70 7/8 – 14 5,000

SP27012 0.906 23.01 1.200 30.48 1 1/16 – 14 2,000

SP27013 0.750 19.05 1.252 31.80 1 1/16 – 12 2,000

SP27015 0.875 22.23 1.502 38.15 1 5/16 – 12 1,500

SP27017 0.875 22.23 1.815 46.10 1 5/8 – 12 1,000

SP27018 1.000 25.40 2.065 52.45 1 7/8 – 12 1,000

SP27019 1.250 31.75 2.699 68.55 2 1/2 – 12 800

SP27020 0.578 14.68 0.503 12.78 3/8 – 24 5,000

Back to Contents

High quality low cost full thread caps, fit UNF and JIC pats

and are used extensively in the aerospace industry.

Page 28: Standard Parts Catalogue

28

Caps for Threaded Parts UN/UNS Caps

DC Series Blue HD Polythene

Part

Number

To Cap Thread

Size

Tubing

Size

Dimensions C

Inches Metric

Box

Quantity

DC3 3/8 – 28 3/16 .20 5.08 2,000

DC4 7/16 – 24 1/4 .24 6.10 2,000

DC5 1/2 – 24 5/16 .24 6.10 2,000

DC6 9/16 – 20 3/8 .26 6.60 1,300

DC8 23/32 – 20 1/2 .27 6.86 1,500

DC10 27/32 – 18 5/8 .34 8.64 1,000

DC12 1 – 16 3/4 .38 9.65 700

DC14 1-1/8 – 16 7/8 .40 10.16 600

DC16 1-1/4 – 14 1 .43 10.92 400

DC20 1-33/64 – 1 1-1/4 .43 10.92 300

DC21S 1-37/64 – 14 1-1/4 .43 10.92 300

DC24 1-25/32 – 14 1-1/2 .50 12.70 200

DC25S 1-27/32 – 14 ` 1-1/2 .50 12.70 200

Back to Contents

Originally engineered for use in aircraft and hydraulic equipment

applications. Seals out contaminants while protecting threads.

Rolled threads allow cap to be either pushed or threaded on. Special

threads meet UN and UNS specifications.

Page 29: Standard Parts Catalogue

29

Caps for Threaded Parts Tear Tab Caps for NPT Threads

TT Series Orange LD Polythene

Part

Number

NPT

Thread Size

Box

Quantity

TT0 1/16 1,000

TT1 1/8 1,000

TT2 1/4 1,000

TT3 3/8 1,000

TT4 1/2 1,000

TT6 3/4 500

TT8 1 500

TT10 1 1/4 400

TT12 1 1/2 200

TT16 2 100

Back to Contents

Protect pipe threads from damage. Easy-to-use Tear Tab Caps employ

friction for snug fit.

To remove, simply pull tear tab and discard.

Fits NPT sizes 1/16 to 2”

Page 30: Standard Parts Catalogue

30

Plugs for Threaded Parts BSP/Gas Plugs

SP25000 Red LD Polythene

Part

Number

Dimensions

Thread Size

Bag

Quantity A

Overall Length Inches Metric

B Overall Diameter

Inches Metric

SP25001 0.410 10.41 0.640 16.25 1/8 5,000

SP25002 0.520 13.21 0.725 18.41 1/4 5,000

SP25003 0.537 13.64 0.900 22.86 3/8 3,000

SP25004 0.685 17.40 1.120 28.45 1/2 1,000

SP25005 0.735 18.67 1.205 30.61 5/8 1,000

SP25006 0.670 17.02 1.300 33.02 3/4 1,000

SP25007 0.675 17.14 1.565 39.75 1 1,000

Back to Contents

Solid top design offers rugged protection against

transit damage, the ingress of dirt and other

contaminants for BSP and Gas fittings

Page 31: Standard Parts Catalogue

31

Plugs for Threaded Parts UNF/JIC Plugs

SP29000 Series Red LD Polythene

Part

Number

Dimensions

Thread Size

Bag

Quantity A

Overall Length Inches Metric

B Overall Diameter

Inches Metric

SP29001 0.500 12.70 0.500 12.70 5/16 – 24 5,000

SP29002 0.468 11.88 0.562 14.27 3/8 – 24 5,000

SP29003 0.531 13.49 0.687 17.45 7/16 – 20 5,000

SP29004 0.562 14.27 0.750 19.05 1/2 – 20 5,000

SP29005 0.546 13.87 0.812 20.62 9/16 – 18 5,000

SP29007 0.593 15.06 0.843 21.41 5/8 – 18 5,000

SP29008 0.750 19.05 1.000 25.40 3/4 – 16 4,000

SP29010 0.796 20.22 1.093 27.76 7/8 – 14 3,000

SP29011 0.859 21.82 1.343 34.11 1 1/16 – 12 2,000

SP29012 0.859 21.82 1.404 35.66 1 1/16 – 14 1,500

SP29013 0.890 22.61 1.654 42.01 1 5/16 – 12 1,500

SP29014 0.750 19.05 1.654 42.01 1 5/16 – 14 1,000

SP29015 0.921 23.39 2.123 53.92 1 5/8 – 12 1,000

SP29016 0.906 23.01 2.092 53.14 1 5/8 – 14 1,000

SP29017 1.015 25.78 2.404 61.06 1 7/8 – 12 500

SP29018 1.015 25.78 2.404 61.06 17/8 – 14 500

SP29019 1.218 30.94 3.092 78.54 2 1/2 – 12 500

SP29020 0.562 14.27 0.781 19.84 5/8 UNC 2,000

Back to Contents

Hollow top design to fit all 18 of the popular

American hydraulic UNF and JIC thread forms.

Page 32: Standard Parts Catalogue

32

Plugs for Threaded Parts BSP/Gas Plugs

SP28000 Red LD Polythene

Part

Number

Dimensions

Thread Size

Bag

Quantity A

Overall Length Inches Metric

B Overall Diameter

Inches Metric

SP28001 0.375 9.53 0.624 15.85 1/8 5,000

SP28002 0.375 6.00 0.812 20.60 1/4 10,000

SP28003 0.453 11.51 0.937 23.80 3/8 5,000

SP28004 0.562 14.27 1.093 27.76 1/2 3,000

SP28005 0.562 14.27 1.187 30.15 5/8 3,000

SP28017 0.594 15.09 1.187 30.15 5/8 2,500

SP28006 0.687 17.45 1.375 34.93 3/4 2,000

SP28007 0.656 16.66 1.375 34.93 7/8 1,500

SP28008 0.750 19.05 1.562 39.67 1 1,500

SP28009 0.718 18.24 1.937 49.20 1 ¼ 1,000

SP28010 0.781 19.83 2.375 60.33 1 ½ 1,000

SP28011 0.781 19.83 2.687 68.25 2 1,000

SP28012 1.000 25.40 3.312 84.12 2 1/4 1,000

SP28013 1.312 33.32 3.687 93.65 2 1/2 200

SP28014 1.375 34.93 3.687 93.65 3 200

Back to Contents

Hollow top design provides ideal low

cost protection for BSP/Gas fittings.

Page 33: Standard Parts Catalogue

33

Plugs for Threaded Parts BSP Slotted Plugs

BSP Plugs Red & Yellow HD Polythene

Part

Number

BSP Thread

Size

A

Metric

B

Metric

C

Metric

Bag

Quantity

BSP01 1/8 9.0 21.0 5.0 9,000

BSP02 1/4 9.0 21.0 5.0 7,000

BSP03 3/8 10.0 23.0 6.0 4,000

BSP04 1/2 12.0 33.7 6.0 3,000

Plugs for Threaded Parts Metric Slotted Plugs

Metric Red & Yellow HD Polythene

Part

Number

To Plug Metric

Thread Size

A

Metric

B

Metric

C

Metric

Bag

Quantity

MP12 M12 X 1.5 9.0 21.0 5.0 4,500

MP14 M14 X 1.5 9.0 21.0 5.0 5,000

MP16 M16 X 1.5 10.0 23.0 6.0 5,000

MP18 M18 X 1.5 10.0 23.0 6.0 5,000

MP20 M20 X 1.5 12.0 28.0 6.0 3,000

MP22 M22 X1.5 12.0 28.0 6.0 3,000

Designed to protect BSP/Gas fittings from contaminants or

damage. Series can be tightened by hand, hex wrench or screw

driver.

Will meet low-pressure testing requirements.

Designed to protect metric threads from damage and contaminants.

Knurled head and screwdriver slot make for easy application

Page 34: Standard Parts Catalogue

34

Plugs for Threaded Parts Metric General Purpose Plugs

TM Series Yellow HD Polythene

Part

Number

To Plug Metric

Thread Size

Dimensions Box

Quantity A

Metric B

Metric C

Metric

TM12 M12 X 1.5 8.89 21.08 5.08 1,600

TM14 M14 X 1.5 8.89 2108 5.08 1,600

TM16 M16 X 1.5 9.91 23.11 6.10 1,000

TM18 M18 X 1.5 9.91 23.11 6.10 1,000

TM20 M20 X 1.5 11.94 27.94 6.10 600

TM22 M22 X 1.5 11.94 27.94 6.10 600

Back to Contents

Designed to protect metric threads. Knurled head and

screwdriver slot make for easy application.

Page 35: Standard Parts Catalogue

35

Plugs for Threaded Parts BSP Sealing Plugs

BT Series Yellow Nylon 6

Part

Number

To Plug BSP

Thread Size

Dimensions Box

Quantity A

Metric B

Metric C

Metric

BT0250 G1/4 9.00 19.20 10.00 7,000

BT0375 G3/8 9.00 22.20 11.00 4,000

BT0500 G1/2 12.00 27.20 13.00 2,500

BT0750 G3/4 12.00 32.30 13.00 1,600

BT1000 G1 15.00 40.00 14.00 900

BT1250 G1-1/4 15.00 50.40 15.00 550

BT1500 G1-1/2 15.00 55.40 15.00 450

BT2000 G2 15.00 68.40 15.00 250

Back to Contents

Designed to protect BSP fittings, with five complete threads

to provide a tight fit. Can be applied or removed with tools

or by hand.

Page 36: Standard Parts Catalogue

36

Plugs for Threaded Part Metric Sealing Plugs

MT Series Yellow Nylon 6

Part

Number

To Plug Metric

Thread Sizes

Dimensions Box

Quantity A

Metric B

Metric C

Metric

MT10 M10 X 1 7.11 14.22 9.91 2,000

MT12 M12 X 1.5 9.91 17.27 9.91 1,600

MT14 M14 X 1.5 9.91 19.30 9.91 1,200

MT16 M16 X 1.5 9.91 22.10 9.91 900

MT18 M18 X 1.5 9.91 23.88 10.92 800

MT20 M20 X 1.5 9.91 25.91 13.97 560

MT22 M22 X 1 9.91 27.18 13.97 500

MT26 M26 X 1.5 9.91 32.00 13.97 340

MT27 M27 X 2 12.95 32.26 13.97 300

MT33 M33 X 2 12.95 40.39 13.97 180

Back to Contents

Designed to protect metric fittings. With five complete

threads to provide a tight fit. Can be applied or removed by

hand or with tools.

Page 37: Standard Parts Catalogue

37

UN and UNS Plugs

DP Series Blue HD Polythene

Part Number

To Plug Thread Size

To Plug Tubing Size

Dimensions Box Quantity A

Inches Metric

B Inches Metric

C Inches Metric

DP3 3/8 – 28 3/16 .28 7.11 .44 11.18 .25 6.35 2,000

DP4 7/16 – 24 1/4 .30 7.62 .56 14.22 .31 7.87 1,400

DP5 1/2 – 24 5/16 .30 7.62 .62 15.75 .31 7.87 2,000

DP6 9/16 – 20 3/8 .32 8.13 .69 17.53 .31 7.87 2,000

DP8 23/32 – 20 1/2 .32 8.13 .88 22.35 .31 7.87 1,000

DP10 27/32 – 18 5/8 .40 10.16 1.00 25.40 .31 7.87 700

DP12 1-16 3/4 .42 10.67 1.12 28.45 .31 7.87 500

DP14 1-1/8 – 16 7/8 .45 11.43 1.25 31.75 .25 6.35 500

DP16 1-1/4 – 14 1 .45 11.43 1.38 35.05 .25 6.35 400

DP20 1-33-64 – 14 1-1/4 .45 11.43 1.62 41.15 .25 6.35 200

DP21S 1-37/64 – 14 1-1/4 .46 11.68 1.75 44.45 .25 6.35 200

DP24 1-25/32 – 14 1-1/2 .55 13.97 2.00 50.80 .25 6.35 200

DP25S 1-27/32 – 14 1-1/2 .55 13.97 2.12 53.85 .25 6.35 200

Back to Contents

Originally engineered for use in aircraft and hydraulic equipment applications. Seals out contaminants while protecting threads. Rolled threads allow cap to be either pushed or threaded. Special threads conform to UN and UNS.

Page 38: Standard Parts Catalogue

38

Flat-Face O-Rings Plugs

FF Series Red LD Polythene

Part Number

To Plug Thread Size

To Plug Tubing Size

Dimensions Box

Quantity A

Inches Metric

B Inches Metric

C Inches Metric

FF6 11/16 – 16 3/8 .44 11.18 .87 22.10 .25 6.35 2,500

FF8 13/16 – 16 1/2 .49 12.45 .94 23.88 .25 6.35 2,500

FF10 1-14 5/8 .59 14.99 1.16 29.47 .25 6.35 500

FF12 1-3/16 – 12 3/4 .63 16.00 1.33 33.78 .25 6.35 500

FF16 1-7/16 – 12 1 .75 19.05 1.63 41.40 .25 6.35 200

Back to Contents

Designed specifically to protect flat-face o-ring fittings. Widely used in the hydraulic and pneumatic industries. Head design allows for easy mechanical and hand installation.

Page 39: Standard Parts Catalogue

39

Flared-Fitting Plugs

HF Series Red HD Polythene

Part Number

To Plug Thread Sizes

To Plug SEA/JIC Fitting

To Plug SAE/JIC Fitting

Dimensions Box Quantity

A Inches Metric

B Inches Metric

C Inches Metric

HF4 3/8 – 24 3/16 3 .46 11.70 .50 12.70 .18 4.57 1,000

HF6 7/16 – 20 1/4 4 .53 13.50 .62 15.75 .19 4.83 1,000

HF8 1/2 – 20 5/16 5 .53 13.50 .68 17.27 .25 6.35 1,000

HF10 9/16 – 18 3/8 6 .50 12.70 .81 20.57 .25 6.35 1,000

HF11 5/8 – 18 3/8 - .59 15.00 .81 20.57 .25 6.35 1,000

HF12 3/4 – 16 1/2 8 .75 19.10 .94 23.88 .25 6.35 500

HF14 7/8 – 14 5/8 10 .87 22.10 .94 23.88 .25 6.35 500

HF16 1-1/6 – 12 3/4 12 .86 21.80 1.41 35.81 .25 6.35 300

HF17 1-1/16 – 14 3/4 - .86 21.80 1.41 35.81 .25 6.35 300

HF18 1-3/16 – 12 7/8 - .93 23.62 1.50 38.10 .25 6.35 240

HF20 1-5/16 – 12 1 16 .93 23.60 1.50 38.10 .25 6.35 200

HF22 1-1/2 – 12 - - .93 23.62 1.75 44.45 .21 6.35 200

HF24 1-5/8 – 12 1-1/4 - .94 23.90 2.22 56.39 .34 8.64 100

HF26 1 -3/4 – 12 - - .97 24.60 2.31 58.67 .34 8.64 100

HF28 1-7/8 – 12 1-1/2 - 1.06 26.90 2.47 62.74 .38 9.65 100

HF30 2-1/4 – 12 1- 3/4 - 1.31 33.30 2.75 69.85 .38 9.65 50

HF32 2-1/2 – 12 2 - 1.31 33.30 3.09 78.49 .38 9.65 45

Back to Contents

Designed to protect flared fittings as well as 37o

flared fittings

without gasket. Engineered with knurled head for ease of

application. Will meet low-pressure testing requirements.

Page 40: Standard Parts Catalogue

40

UNF and UN General Purpose Plugs

TF Series Red Polypropylene

Part Number

To Plug Thread

Size

Dimensions Box Quantity

A Inches Metric

B Inches Metric

C Inches Metric

TF7-1 7/16 – 20 .30 7.62 .68 17.27 .19 4.83 1,000

TF 8 1/2 – 20 .36 9.14 .74 18.80 .19 4.83 900

TF 9 9/16 – 18 .35 8.89 .81 20.57 .19 4.83 700

TF10 5/8 – 18 .34 8.64 .74 18.80 .17 4.32 1,500

TF12 3/4 – 16 .44 11.18 .89 22.61 .18 4.57 1,000

TF12-2 3/4 – 16 .44 11.18 1.03 26.16 .19 4.83 1,000

TF14 7/8 -14 .50 12.70 1.02 25.91 .24 6.10 500

TF17-2 1-1/16 – 12 .62 15.75 1.47 37.34 .19 4.83 300

TF21-1 1-5/16 – 12 .88 22.35 1.56 39.62 .25 6.35 200

TF26 1-5/8 – 12 1.00 25.40 2.00 50.80 .25 6.35 140

TF30 1-7/8 – 12 1.00 25.40 2.25 57.15 .25 6.35 100

Back to Contents

General purpose threaded plug that can be utilised for a variety of different applications. Series can be tightened by hand, hex, wrench or screwdriver. Will meet low-pressured testing requirements.

Thread locations will vary

Sampling recommended.

Page 41: Standard Parts Catalogue

41

Pipe Thread Protectors

OE Series (Open End) LD Polythene

Part Number

NPT Size

Dimensions A C

Colour

Box

Quantity Inches Metric

Inches Metric

OE311 1/2 0.840 21.34 .078 19.81 Black 1,000

OE312 3/4 1.050 26.67 .078 19.81 Red 700

OE313 1 1.315 33.40 .097 24.64 Blue 800

OE314 1-1/4 1.660 42.16 1.00 25.40 Red 500

OE315 1-1/2 1.900 48.26 1.00 25.40 Black 400

OE316 2 2.375 60.33 1.03 26.16 Blue 240

OE317 2-1/2 2.875 73.03 1.56 39.62 Black 120

OE318 3 3.500 88.90 1.63 41.40 Blue 80

OE319 3-1/2 4.000 101.60 1.66 42.16 Black 60

OE320 4 4.500 114.30 1.72 43.69 Blue 45

OE321 5 5.563 141.30 1.81 45.97 Blue 24

OE322 6 6.625 168.28 1.94 49.28 Blue 16

The OE series has a specially designed bead to assure a snug fit for excellent

protection of threaded pip and conduit. An inexpensive way to eliminate a

costly concern.

Page 42: Standard Parts Catalogue

42

Pipe Thread Protectors

CE Series (Closed End ) LD Polythene

Part Number

NPT Size

Dimensions A C

Colour

Box

Quantity Inches Metric

Inches Metric

CE309 1/4 0.53 13.69 0.59 14.99 Black 1,400

CE310 3/8 0.67 17.09 0.59 14.99 Black 800

CE311 1/2 0.84 21.34 0.78 19.81 Black 1,000

CE312 3/4 1.05 26.67 0.78 19.81 Black 800

CE313 1 1.31 33.40 0.97 24.64 Black 900

CE314 1-1/4 1.66 42.16 1.00 25.40 Black 500

CE315 1-1/2 1.90 48.26 1.00 25.40 Black 400

CE316 2 2.37 60.33 1.03 26.16 Black 240

CE317 2-1/2 2.87 73.00 1.56 39.62 Black 100

CE318 3 3.50 88.90 1.63 41.40 Black 80

CE319 3-1/2 4.00 101.60 1.66 42.16 Black 60

CE320 4 4.50 114.30 1.72 43.39 Black 45

CE321 5 5.56 141.30 1.81 45.97 Black 24

CE322 6 6.62 168.28 1.94 49.28 Black 16

CE324 8 8.62 219.08 2.13 54.10 Black 16

CE325 10 10.75 273.05 2.34 59.44 Black 8

CE326 12 12.75 323.85 2.53 64.26 Black 5

CE327 14 14.00 355.60 2.66 67.56 Black 4

Back to Contents

Excellent protection against damage caused during transit. Eliminates

debris from entering pipe and have been designed for easy installation

and removal.

The NPT size Column will help you match a nominal bore.

Page 43: Standard Parts Catalogue

43

PVC Dip Mouldings – Round PVC Caps

VC Series Black PVC VC Series Black PVC VC Series Black PVC

Part Number

To Cap Diameter

Dimensions

Box Quantity

Part Number

To Cap Diameter

Dimensions

Box Quantity

Part Number

To Cap Diameter

Dimensions

Box Quantity

A In mm

C In mm

A In mm

C In mm

A In mm

C In mm

VC070-8 .070 1.78 .50 12.70 1,000 VC240-8 .240 6.09 .50 12.69 1,000 VC485-8 .485 12.32 .50 12.70 1,000

VC080-8 .080 2.03 .50 12.70 1,000 VC240-16 .240 6.09 1.00 25.38 1,000 VC485-16 .485 12.32 1.00 25.40 1,000

VC093-8 .093 2.36 .50 12.70 1,000 VC250-8 .250 6.35 .50 12.70 1,000 VC500-8 .500 12.70 .50 12.70 1,000

VC110-8 .110 2.79 .50 12.70 1,000 VC250-16 .250 6.35 1.00 25.40 1,000 VC500-16 .500 12.70 1.00 25.40 1,000

VC125-8 .125 3.18 .50 12.70 1,000 VC281-8 .281 7.14 .50 12.70 1,000 VC531-8 .531 13.49 .50 12.70 1,000

VC125-16 .125 3.18 1.00 25.40 1,000 VC281-16 .281 7.14 1.00 25.40 1,000 VC531-16 .531 13.49 1.00 25.40 500

VC140-8 .140 3.56 .50 12.70 1,000 VC312-8 .312 7.93 .50 12.70 1,000 VC544-8 .544 13.82 .50 12.70 1,000

VC140-16 .140 3.56 1.00 25.40 1,000 VC312-16 .312 7.93 1.00 25.40 1,000 VC544-16 .544 13.82 1.00 25.40 1,000

VC148-8 .148 3.76 .50 12.70 1,000 VC313-16 .313 7.95 1.00 25.40 1,000 VC562-8 .562 14.28 .50 12.70 500

VC156-8 .156 3.96 .50 12.70 1,000 VC343-16 .343 8.71 1.00 25.40 1,000 VC562-16 .562 14.28 1.00 25.40 500

VC156-16 .156 3.96 1.00 25.40 1,000 VC360-8 .360 9.14 .50 12.70 1,000 VC600-8 .600 15.24 .50 12.70 600

VC172-8 .172 4.37 .50 12.70 1,000 VC375-8 .375 9.53 .50 12.70 1,000 VC600-16 .600 15.24 1.00 25.40 400

VC172-16 .172 4.37 1.00 25.40 1,000 VC375-16 .375 9.53 1.00 25.40 500 VC610-8 .610 15.49 .50 12.70 1,000

VC180-8 .180 4.57 .50 12.70 1,000 VC390-8 .390 9.91 .50 12.70 1,000 VC610-16 .610 15.49 1.00 25.40 1,000

VC180-16 .180 4.57 1.00 25.40 1,000 VC406-8 .406 10.31 .50 12.70 1,000 VC615-8 .615 15.62 .50 12.70 1,000

VC187-8 .187 4.75 .50 12.70 1,000 VC406-16 .406 10.31 1.00 25.40 500 VC615-16 .615 15.62 1.00 25.40 1,000

VC187-16 .187 4.75 1.00 25.40 1,000 VC437-8 .437 11.10 .50 12.70 1,000 VC625-8 .625 15.88 .50 12.70 500

VC207-8 .207 5.26 .50 12.70 1,000 VC437-16 .437 11.10 1.00 25.40 500 VC625-16 .625 15.88 1.00 25.40 500

VC234-8 .234 5.94 .50 12.70 1,000 VC470-8 .470 11.94 .50 12.70 1,000 VC670-8 .670 17.02 .50 12.70 1,000

VC234-16 .234 5.94 1.00 25.40 1,000 VC470-16 .470 11.94 1.00 25.40 1,000 VC670-16 .670 17.02 1.00 25.40 1,000

Pliable PVC caps stretch to fit for ideal protection where tolerances vary. Resist tearing and cracking. Huge range of sizes available to the representative selection detailed below. Standard material Black withstands 75

oC

The range is available to order in hi-temp material to withstand 240oC

Page 44: Standard Parts Catalogue

44

PVC Dip Mouldings – Round PVC Caps (continued from previous page)

VC Series Black PVC VC Series Black PVC VC Series Black PVC

Part Number

To Cap Diameter

Dimensions

Box Quantity

Part Number

To Cap Diameter

Dimensions

Box Quantity

Part Number

To Cap Diameter

Dimensions

Box Quantity

A In mm

C In mm

A In mm

C In mm

A In mm

C In mm

VC687-8 .687 17.45 .50 12.70 500 VC922-8 .922 23.42 .50 12.70 1,000 VC1687-16 1.687 42.85 1.00 25.40 140

VC687-16 .687 17.45 1.00 25.40 1,000 VC922-16 .922 23.42 1.00 25.40 1,000 VC1750-16 1.750 44.45 1.00 25.40 140

VC720-8 .720 18.29 .50 12.70 1,000 VC937-8 .937 23.80 .50 12.70 500 VC1875-16 1.875 47.62 1.00 25.40 120

VC720-16 .720 18.29 1.00 25.40 1,000 VC937-16 .937 23.80 1.00 25.40 200 VC2000-16 2.000 50.80 1.00 25.40 120

VC735-8 .735 18.67 .50 12.70 1,000 VC980-8 .980 24.89 .50 12.70 1,000 VC2125-16 2.125 53.98 1.00 25.40 100

VC735-16 .735 18.67 1.00 25.40 1,000 VC980-16 .980 24.89 1.00 25.40 1,000 VC2250-16 2.250 57.15 1.00 25.40 100

VC740-8 .740 18.80 .50 12.70 1,000 VC1000-8 1.000 25.40 .50 12.70 200 VC2375-16 2.375 60.33 1.00 25.40 80

VC740-16 .740 18.80 1.00 25.40 1,000 VC1000-16 1.000 25.40 1.00 25.40 200 VC2500-16 2.500 63.50 1.00 25.40 80

VC750-8 .750 19.05 .50 12.70 500 VC1040-16 1.040 26.42 1.00 25.40 1,000 VC2625-16 2.625 66.67 1.00 25.40 80

VC750-16 .750 19.05 1.00 25.40 200 VC1062-16 1.062 26.97 1.00 25.40 240 VC2750-16 2.750 69.85 1.00 25.40 60

VC812-8 .812 20.63 .50 12.70 500 VC1125-16 1.125 28.58 1.00 25.40 1,000 VC2875-16 2.875 73.03 1.00 25.40 50

VC812-16 .812 20.63 1.00 25.40 200 VC1187-16 1.187 30.15 1.00 25.40 200 VC3000-16 3.000 76.20 1.00 25.40 50

VC843-8 .843 21.41 .50 12.70 500 VC1250-16 1.250 31.75 1.00 25.40 200 VC3125-16 3.125 79.37 1.00 25.40 1,000

VC843-16 .843 21.41 1.00 25.40 200 VC1312-16 1.312 33.32 1.00 25.40 160 VC3250-16 3.250 82.55 1.00 25.40 1,000

VC855-8 .855 21.72 .50 12.70 1,000 VC1375-16 1.375 34.92 1.00 25.40 160 VC3500-16 3,500 88.90 1.00 25.40 1,000

VC855-16 .855 21.72 1.00 25.40 1,000 VC1437-16 1.437 36.50 1.00 25.40 150 VC3625-16 3.625 92.08 1.00 25.40 1,000

VC875-8 .875 22.23 .50 12.70 500 VC1500-16 1.500 8.10 1.00 25.40 150 VC4000-16 4.000 101.60 1.00 25.40 1,000

VC875.16 .875 22.23 1.00 25.40 200 VC1625-16 1.625 41.27 1.00 25.40 150 VC4250-16 4.250 107.95 1.00 25.40 1,000

VC905-8 .905 22.99 .50 12.70 1,000 VC1670-8 1.670 42.42 .50 12.70 1,000 VC4375-16 4.375 111.13 1.00 25.40 1,000

VC905-16 .905 22.99 1.00 25.40 1,000 VC1670-16 1.670 42.42 1.00 25.40 1,000 VC4437-16 4.437 112.70 1.00 25.40 1,000

Back to Contents

Page 45: Standard Parts Catalogue

45

PVC Dip Mouldings – Standard and Hi-Temp Plugs

HP Series Black or Red Vinyl

Part Number

To Plug Thread Sizes Dimensions Box

Quantity

NPT/BSP

Standard

Metric A

Inches Metric B

Inches Metric

HP1 - 1/4 M6 .195 4.95 .125 3.18 100

HP2 - 5/16 M8x1 .290 7.37 .210 5.33 100

HP3 1/8 3/8 M10x 1.25 .400 10.16 .290 7.37 100

HP4 - 7/16 M12 .445 11.30 .340 8.64 100

HP5 1/4 1/2 M14 .530 13.46 .365 9.27 100

HP6 - 9/16 - .570 14.48 .445 11.30 50

HP7 3/8 5/8 - .640 16.26 .520 13.21 50

HP8 1/2 3/4 M20 .800 20.32 .682 17.32 50

HP9 - 7/8 M24 .870 22.10 .732 18.59 25

HP10 3/4 1-1/16 M27x2 1.025 28.04 .891 22.63 25

HP11 1 1-3/16, 1-1/4, 1-5/16 M33 1.275 32.39 1.145 29.13 25

Back to Contents

Pliable PVC plugs with all-round pull tab design provides excellent protection for

threaded or smooth bores. Standard PVC material colour black, protects up to 75 oC.

Hi temp PVC material protect up to 240 oC.

Page 46: Standard Parts Catalogue

46

PVC Dip Mouldings – Standard and Hi-Temp Square Caps

SV Series Black or Red Vinyl

Part Number

To Cap Dimensions Box

Quantity A

Inches Metric C

Inches Metric

SV250-8 .250 6.35 .50 12.70 1,000

SV500-8 .500 12.70 .50 12.70 600

SV625-8 .625 15.88 .50 12.70 500

SV750-12 .750 19.05 .75 19.05 400

SV1000-16 1.000 25.40 1.00 25.40 180

SV1250-16 1.250 31.75 1.00 25.40 140

SV1500-16 1.500 38.10 1.00 25.40 120

SV1750-16 1.750 44.45 1.00 25.40 100

SV1875-16 1.500 47.63 1.00 25.40 80

SV2500-16 2.500 63.50 1.00 25.40 80

SV3500-16 3.500 88.90 1.00 25.40 40

SV4000-16 4.000 101.60 1.00 25.40 20

Back to Contents

Designed to minimize tearing, cracking or splitting. Will fit the most

popular square sizes of plastic or steel tubing. Our high-gloss material is

great for decorative applications.

Page 47: Standard Parts Catalogue

47

PVC Dip Moulding – Vinyl (ergo-correct) Pull Caps

EC Series Black or Red Vinyl

Part

Number

To Cap Diameter

A Inches Metric

Dimensions

Box

Quantity B Inches Metric

C Inches Metric

EC-406-8 .406 10.31 .500 12.70 1.150 29.21 1,000

EC-470-8 .470 11.94 .500 12.70 1.280 32.51 1,000

EC-595-10 .595 15.11 .625 15.88 1.525 38.73 500

EC-717-16 .717 18.21 .625 15.88 2.130 54.10 400

EC-950-14 .950 24.13 .625 15.88 2.140 54.36 250

Pliable material and form-fitting tab. Used in a variety of applications as thread protectors, dust covers and paint masks. Helps prevent moisture and impact damage.

Page 48: Standard Parts Catalogue

48

PVC Dip Moulding – Vinyl Pull Caps

PC Series Black or Red Vinyl

Part

Number

To Cap Diameter

A Inches Metric

Dimensions Box

Quantity B Inches Metric

C Inches Metric

PC 187-12 .187 4.74 .75 19.05 1.36 34.54 50

PC 240-12 .240 6.09 .75 19.05 1.54 39.12 50

PC 303-12 .303 7.69 .75 19.05 1.52 38.61 50

PC 312-12 .312 7.92 .75 19.05 1.52 38.61 50

PC 365-12 .365 9.27 .75 19.05 1.53 38.86 50

PC 406-12 .406 10.31 .75 19.05 1.45 36.83 50

PC 490-12 .490 12.44 .75 19.05 1.73 43.94 50

PC 521-12 .521 13.23 .75 19.05 1.55 39.37 50

PC 552-12 .552 14.02 .75 19.05 1.44 36.58 50

PC 600-12 .600 15.24 .75 19.05 1.31 33.27 50

PC 615-12 .615 15.62 .75 19.05 1.51 38.35 50

PC 677-12 .677 17.19 .75 19.05 1.31 33.27 50

PC 760-12 .760 19.30 .75 19.05 1.54 39.12 50

PC 985-12 .985 25.01 .75 19.05 1.37 34.80 25

Back to Contents

The pull tab at the centre of this cap allows for easy removal. May be used in a

variety of applications as thread protectors, dust covers and paint masks. Helps

prevent moisture and impact damage.

Page 49: Standard Parts Catalogue

49

Hi-Temp Protection Parts – Silicone Caps

SC Series Silicone Caps

Part

Number

To Cap Diameter Inches Metric

Inside Length Inches Metric

Bag

Quantity

SC-093-12 0.093 2.36 3/4 19.05 200

SC-109-12 0.109 2.77 3/4 19.05 200

SC-125-16 0.125 3.18 1 25.40 200

SC-156-16 0.156 3.96 1 25.40 100

SC-172-16 0.172 4.37 1 25.40 100

SC-187-16 0.187 4.75 1 25.40 100

SC-234-16 0.234 5.94 1 25.40 100

SC-250-16 0.250 6.35 1 25.40 100

SC-281-16 0.281 7.14 1 25.40 100

SC-312-16 0.312 7.92 1 25.40 100

SC-375-16 0.375 9.53 1 25.40 100

SC-437-16 0.437 11.10 1 25.40 40

SC-500-24 0.500 12.70 1 1/2 38.10 50

SC-625-24 0.625 15.88 1 1/2 38.10 50

SC-750-24 0.750 19.05 1 1/2 38.10 50

SC-812-24 0.812 20.62 1 1/2 38.10 40

SC-875-24 0.875 22.23 1 1/2 38.10 40

Seventeen sizes of caps offering protection to 250 oC or intermittently to 300

oC.

Natural Silicone Rubber.

Page 50: Standard Parts Catalogue

50

Hi-Temp Protection Parts – Silicone Plugs

SCP Series Silicone Plugs

Part Number

Small Diameter Inches Metric

Large Diameter Inches Metric

Length Inches Metric

Bag Quantity

SCP2-6 1/16 1.59 3/16 4.76 5/8 15.88 1,000

SCP4-8 1/8 3.17 1/4 6.35 3/4 19.05 1,000

SCP6-11 3/16 4.76 11/32 8.73 5/8 15.88 1,000

SCP8-12 1/4 6.35 3/8 9.52 3/4 19.05 1,000

SCP11-4 11/32 8.73 7/16 11.11 12/32 18.25 1,000

SCP18-24 9/16 14.29 3/4 19.05 1 25.40 1,000

Back to Contents

High-temperature plugs. Extended protection to 250 oC, intermittent

protection to 300 oC. Ideal for powder coating, chrome plating,

electro plating, paint spraying and anodizing. Sizes 1/16 – 3/4. Natural Silicone Rubber.

Page 51: Standard Parts Catalogue

51

HI-Temp Protection Parts – Flexible Protection Caps

FPC Black Termoplastic Rubber

Part Number

To Cap Diameter mm

Inside Length mm

Bag Quantity

FPC-05 5 23.5 10,000

FPC-06 6 25 10,000

FPC-07 7 24 10,000

FPC-08 8 25 10,000

FPC-09 9 25 7,000

FPC-10 10 29.5 5,000

FPC-11 11 29 4,500

FPC-12 12 29 4,000

FPC-13 13 29 3,500

FPC-14 14 29.5 3,000

FPC-15 15 29.5 2,500

FPC-16 16 28 2,500

FPC-17 17 29.5 2,000

FPC-18 18 28.5 2,000

FPC-19 19 29.5 2,000

FPC-20 20 28.5 1,600

Back to Contents

Ideal protection for threads on metric bolts or studs. Flexible TPR material withstands temperatures to 190

oC. Tab and Eye feature allows for fast

removal with screwdriver or by hand. Metric sizes from 5mm to 20mm. Standard colour: Black

Page 52: Standard Parts Catalogue

52

Ferrules and End Caps – Parallel Cap

SP70000 Series Yellow LD Polythene

Part

Number

A Dia

Inches Metric

B Dia

Inches Metric

C Inches Metric

D Inches Metric

E Inches Metric

F Inches Metric

Bag

Quantity

SP70001 0.250 6.35 0.375 9.52 0.500 12.70 0.537 13.64 0.475 12.07 0.062 1.57 5,000

SP70004 0.312 7.92 0.436 11.07 0.500 12.70 0.862 21.89 0.800 20.32 0.062 1.57 5,000

SP70005 0.375 9.53 0.500 12.70 0.625 15.88 1.012 25.70 0.950 24.13 0.062 1.57 5,000

SP70010 0.437 11.10 0.562 14.27 0.687 17.45 1.012 25.70 0.950 24.13 0.062 1.57 5,000

SP70014 0.500 12.70 0.625 15.87 0.750 19.05 1.499 38.07 1.437 36.50 0.062 1.57 4,000

SP98047 * 0.481 12.22 0.981 19.87 0.606 15.39 0.437 11.10 0.500 12.70 0.062 1.57 4,000

SP70019 0.590 14.99 0.715 18.16 0.835 21.21 1.012 25.70 0.950 24.13 0.062 1.57 4,000

SP70020 0.625 15.88 0.750 19.05 0.875 22.23 1.249 31.72 1.187 30.15 0.062 1.57 1,000

SP70025 0.750 19.05 0.875 22.22 1.000 25.40 1.128 30.94 1.156 29.36 0.062 1.57 1,500

SP70035 1.000 25.40 1.125 28.57 1.250 31.75 1.499 38.07 1.437 36.50 0.062 1.57 1,000

SP70040 1.102 27.99 1.226 31.14 1.352 34.34 1.012 25.70 0.950 24.13 0.062 1.57 1,000

Back to Contents

These low cost Caps feature grip and flange to assist

easy fitting and removal.

* Available in Red LDP only.

Page 53: Standard Parts Catalogue

53

Ferrules and End Caps – Ferrules

SP98100 Black LD Polythene

Part Number

A Diameter

Inches Metric

B Diameter

Inches Metric

Bag

Quantity

SP98187 0.187 4.80 0.470 11.90 10,000

SP98188 0.312 7.90 0.563 14.30 10,000

SP98189 0.375 9.50 0.575 15.10 2,500

SP98190 0.500 12.70 0.682 18.60 4,000

Back to Contents

Ferrules provide a low cost decorative finish or

can offer extra protection during transit.

Page 54: Standard Parts Catalogue

54

Ferrules and End Caps – Protective Thimbles

Red LD Polythene

Part Number

A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

Bag Quantity

SP98120 0.345 8.76 0.812 20.62 0.052 1.32 0.062 1.57 5,000

SP98045 0.490 12.45 0.312 7.92 0.067 1.70 0.062 1.57 5,000

SP98002 0.695 17.65 0.630 16.00 0.078 1.98 0.039 0.99 2,500

SP98097 1.125 28.58 1.750 44.45 0.050 1.27 0.050 1.27 1,000

SP98009 1.125 28.58 3.000 76.20 0.035 0.89 0.035 0.89 1,000

Ferrules and End Caps – Protective Thimbles

SP98114 Red LD Polythene

Part Number

A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

E Inches Metric

Bag Quantity

SP98114 22.23 0.875 27.76 1.093 30.15 1.187 0.914 0.036 11.43 0.450 3,000

Back to Contents

This thimble caps 7/8” threaded parts and can be used as a plug too. Available in other colour choices.

Other colours available to order.

Page 55: Standard Parts Catalogue

55

Finishing Parts – Round Ribbed Inserts (Imperial Sizes)

RR Series Black LD Polythene

Size Description Wall Thickness Bag Quantity

1/2” Ribbed 16-18 SWG 10,000

1/2” Plain 20 SWG 10,000

5/8” Ribbed 14-20 SWG 5,000

3/4” Ribbed 14-20 SWG 5,000

3/4” Plain 16 SWG 5,000

7/8” Ribbed 14-20 SWG 4,000

7/8” Plain 16 SWG 4,000

7/8” Ribbed 18 SWG 5,000

1” Ribbed 14-20 SWG 4,000

1” Ribbed 10-14 SWG 4,000

1” Ribbed 16-18 SWG 4,000

1 1/8” Ribbed 14-20 SWG 2,500

1 1/4” Ribbed 14-20 SWG 1,500

1 1/2” Ribbed 14-20 SWG 1,500

1 5/8” Ribbed 14-20 SWG 1,000

1 3/4” Ribbed 14-20 SWG 500

1 29/32” Ribbed 6-10 SWG 500

2” Ribbed 10-14 SWG 500

2” Ribbed 14-20 SWG 500

2” Plain 10 SWG 500

2 1/4“ Ribbed 14-20 SWG 500

2 3/8” Ribbed 10-14 SWG 400

2 1/2” Ribbed 14-18 SWG 400

2 1/2” Ribbed 8-12 SWG 400

These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.

Page 56: Standard Parts Catalogue

56

Finishing Parts – Round Ribbed Inserts (Metric Sizes)

RR Series Black LD Polythene

Size Description Wall Thickness Bag Quantity

12.7 mm Ribbed 1.2-1.5 mm 10,000

15.8 mm Ribbed 1.0-2.0 mm 5,000

19.0 mm Ribbed 1.0-2.0 mm 5,000

22.2 mm Ribbed 1.0-2.0 mm 4,000

25.4 mm Ribbed 1.0-3.2 mm 4,000

28.5 mm Ribbed 1.0-2.0 mm 2,500

31.7 mm Ribbed 1.0-2.0 mm 2,500

38.1 mm Ribbed 1.0-2.0 mm 1,500

41.2 mm Ribbed 1.0-2.0 mm 1,000

44.4 mm Ribbed 1.0-2.0 mm 1,000

48.0 mm Ribbed 3.5-4.5 mm 500

50.8 mm Ribbed 1.0-3.2 mm 500

57.1 mm Ribbed 1.0-2.0 mm 500

60.3 mm Ribbed 2.0-3.2 mm 400

63.5 mm Ribbed 1.2-3.5 mm 400

100.0 mm Ribbed 4.5-6.0 mm 200

110.00 mm Ribbed 4.5-6.0 mm 150

Back to Contents

These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.

Page 57: Standard Parts Catalogue

57

Finishing Parts – Square Ribbed Inserts (Imperial Sizes)

SR Black LD Polythene

Size Description Wall Thickness Bag Quantity

1/2” x 1/2” Ribbed 16-18 SWG 10,000

5/8” x 5/8” Ribbed 14-20 SWG 5,000

3/4” x 3/4” Ribbed 14-20 SWG 5,000

7/8” x 7/8” Ribbed 14-20 SWG 3,000

1” x 1” Ribbed 10-14 SWG 2,500

1” X 1” Ribbed 14-20 SWG 2,500

1” X 1” Ribbed 16-18 SWG 2,500

1 1/8” x 1 1/8” Ribbed 14-20 SWG 2,000

1 1/4” x 1 1/4” Ribbed 14-20 SWG 2,000

1 3/8” x 1 3/8” Ribbed 14-20 SWG 2,000

1 1/2” x 1 1/2“ Ribbed 14-20 SWG 1,000

1 1/2” x 1 1/2“ Ribbed 10-14 SWG 1,000

1 3/4” x 1 3/4” Ribbed 14-20 SWG 1,000

2” x 2” Ribbed 10-14 SWG 500

2” x 2” Ribbed 14-20 SWG 500

Back to Contents

These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.

Page 58: Standard Parts Catalogue

58

Finishing Parts – Square Ribbed Inserts (Metric Sizes)

SR Black LD Polythene

Size Description Wall Thickness Bag Quantity

12.7 x 12.7 Ribbed 1.2-1.5 mm 10,000

15.8 x 15.8 Ribbed 1.0-2.0 mm 5,000

20.0 x 20.0 Ribbed 1.0-2.0 mm 5,500

22.2 x 22.2 Ribbed 1.0-2.0 mm 3,000

25.4 x 25.4 Ribbed 1.0-3.2 mm 2,500

28.5 x 28.5 Ribbed 1.0-2.0 mm 2,000

30.0 x 30.0 Ribbed 1.0-2.0 mm 2,000

31.7 x 31.7 Ribbed 1.0-2.0 mm 2,000

34.9 x 34.9 Ribbed 1.0-2.0 mm 1,000

38.1 x 38.1 Ribbed 1.0-3.2 mm 1,000

40.0 x 40.0 Ribbed 1.0-2.0 mm 500

40.0 x 40.0 Ribbed 2.0-3.0 mm 500

44.4 x 44.4 Ribbed 1.0-2.0 mm 1,000

45.0 x 45.0 Plain 2.0 mm 1,000

50.8 x 50.8 Ribbed 1.0-3.2 mm 500

80.0 x 80.0 Plain 3.0-5.0 mm 150

100.0 x 100.0 Plain 8.0 mm 100

Back to Contents

These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.

Page 59: Standard Parts Catalogue

59

Finishing Parts – Rectangular Ribbed Inserts (Imperial Sizes)

RTR Black LD Polythene

Size Description Wall Thickness Bag Quantity

1” x 1/2” Ribbed 16-18 SWG 5,000

1 1/4“ x 5/8” Plain 16-18 SWG 5,000

1 3/8” x 5/8” Ribbed 14-20 SWG 3,000

1 1/2” x 3/4” Ribbed 14-20 SWG 2,000

1 1/2” x 1” Plain 16-18 SWG 2,000

1 1/2” x 1” Ribbed 14-20 SWG 2,000

2” x 1” Ribbed 14-20 SWG 1,500

2” x 1” Ribbed 16-18 SWG 1,000

2” x 1” Ribbed 10-14 SWG 1,500

2 1/2” x 1” Ribbed 14-20 SWG 1,000

2 1/2” x 1 1/2” Ribbed 14-20 SWG 500

Back to Contents

These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.

Page 60: Standard Parts Catalogue

60

Finishing Parts – Rectangular Ribbed Inserts (Metric Sizes)

RTR Series Black LD Polythene Size Description Wall Thickness Bag Quantity

20 x 10 mm Plain 1.5 mm 10,000

25 x 20 mm Plain 1.5 mm 3,000

30 x 15 mm Plain 1.5 mm 4,000

30 x 15 mm Plain 1.2 mm 4,000

30 x 20 mm Plain 2.0 mm 3,000

31 x 19 mm Plain 1.5 mm 2,500

32 x 16 mm Plain 1.5 mm 5,000

34 x 20 mm Plain 2.0 mm 2,000

40 x 20 mm Ribbed 1.0-2.0 mm 2,000

40 x 25 mm Ribbed 1.0-2.0 mm 1,500

45 x 20 mm Plain 1.2 mm 1,500

50 x 25 mm Ribbed 1.5-3.2 mm 1,500

50 x 30 mm Ribbed 1.0-3.0 mm 1,000

50 x 40 mm Plain 2.5 mm 1,000

60 x 20 mm Plain 1.5 mm 1,000

60 x 20 mm Ribbed 1.0-1.6 mm 1,000

60 x 25 mm Plain 1.5 mm 1,000

60 x 30 mm Ribbed 1.5-3.0 mm 500

60 x 40 mm Ribbed 2.0-3.5 mm 500

70 x 25 mm Plain 1.5 mm 500

70 x 25 mm Ribbed 1.2-1.6 mm 500

80 x 30 mm Plain 2.0 mm 500

80 x 40 mm Ribbed 2.5-4.0 mm 250

100 x 50 mm Ribbed 2.0-4.0 mm 200

105 x 40 mm Plain 2.0-4.0 mm 200

Back to Contents

These inserts are the ideal way of finishing your tubed furniture etc. All inserts are measured by the outer head size. These parts are produced with varying rib sizes to accommodate different gauge wall thicknesses.

Page 61: Standard Parts Catalogue

61

Snap in Plugs

SI Series Black LD Polythene

Part

Number

To Plug

Hole Size

Metal

Thickness

Dimensions Box

Quantity A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

SI 659 3/8 .02-.05 .410 10.41 .37 9.65 .31 7.87 .75 19.05 1,000

SI 659-1 3/8 .06-.11 .410 10.41 .37 9.65 .31 7.87 .75 19.05 1,000

SI 400 7/16 .03-.06 .470 11.94 .43 11.43 .36 9.14 .69 17.53 1,000

SI 411 1/2 .03-.08 .540 13.72 .49 12.95 .40 10.16 .88 22.35 1,000

SI 401 9/16 .03-.08 .600 15.24 .55 14.22 .45 11.43 .87 22.10 1,000

SI 430 5/8 .06-.08 .680 17.15 .62 15.87 .50 12.70 .81 20.57 1,000

SI 437 11/16 .03-.08 .680 17.78 .68 17.78 .56 14.22 1.01 25.66 1,000

SI 412 3/4 .05-.11 .790 20.07 .73 19.30 .62 15.75 1.01 25.66 1,000

SI 402 13/16 .03-.08 .850 21.59 .81 20.62 .67 17.02 1.11 28.19 1,200

SI 438 7/8 .03-.08 .910 23.11 .86 22.35 .75 19.05 1.16 29.47 1,000

SI 403 15.16 .03-.08 .980 24.89 .92 24.13 .78 19.81 1.31 33.28 1,000

SI 413 1 .03-.08 1.040 26.42 1.000 25.40 .88 22.35 1.38 35.05 1,000

SI 465 1-3/32 .03-.08 1.150 29.21 1.090 27.60 1.00 25.40 1.31 33.27 1,000

SI 404 1-1/8 .03-.08 1.180 29.97 1.250 31.75 1.01 25.65 1.53 38.86 400

SI 457 1-3/16 .03-.08 1.220 30.99 1.160 30.48 1.05 26.67 1.56 39.63 500

SI 414 1-1/4 .03-.08 1.290 32.77 1.250 31.75 1.12 28.45 1.62 41.15 500

SI 405 1-5/16 .03-.08 1.360 34.55 1.290 33.78 1.14 28.96 1.68 42.67 500

SI 416 1-3/4 .03-.08 1.540 39.12 1.750 44.45 1..62 41.15 1.68 42.67 400

SI 417 2 .03-.08 2.040 51.81 1.980 51.05 1.88 47.75 2.36 59.94 200

SI 406 2-1/8 .03-.08 2.170 55.12 2.100 54.36 1.94 49.28 2.49 63.25 200

SI 419 2-1/2 .03-.08 2.560 65.02 2.500 63.50 2.38 60.45 3.00 76.20 200

SI 472 2-5/8 .03-.08 2.678 67.95 2.620 66.67 2.52 64.01 3.12 79.25 200

SI 421 3 .03-.08 3.060 77.73 2.970 76.71 2.85 72.39 3.36 85.35 150

Provides an attractive finished appearance for access holes in sheet metal.

Widely used on automotive bodies, tanks, appliances or in any application

where an attractive appearance is needed. Flexible yet durable. Snap-in

ring provides a secure fit.

Page 62: Standard Parts Catalogue

62

Snap in Plugs (Continued from previous page)

SI Series Black LD Polythene

Part

Number

To Plug

Hole Size

Metal

Thickness

Dimensions Box

Quantity A Inches Metric

B Inches Metric

C Inches Metric

D Inches Metric

SI 407 3-1/8 .03-.08 3.180 80.77 3.120 79.37 2.94 74.68 3.52 89.41 140

SI 408 3-3/8 .03-.08 3.430 87.12 3.315 86.36 3.22 81.79 3.75 95.25 100

SI 409 3-1/2 .03-11 3.560 90.43 3.470 89.41 3.34 84.84 3.86 98.05 100

SI 425 4 .05-.10 4.060 103.12 4.000 101.60 3.90 99.06 4.50 114.30 70

SI 425S 4 .05-.10 4.100 104.14 4.000 101.60 3.88 98.55 4.50 114.30 80

Back to Contents

Page 63: Standard Parts Catalogue

63

Quick Release Coupling Cap

Part Number

Bag Quantity

SP95026

22.22 mm OD

0.875’

1,000

Quick Release Coupling Plug

Part Number

Bag Quantity

SP95027

20.32 mm ID

0.800’

1,000

Back to Contents

Dust Cap to suit quick release coupling.

Black PVC.

Dust Plug to suit quick release coupling.

Red PVC .

Page 64: Standard Parts Catalogue

64

Hose Protection flanged Washers

Range 1 Red LD Polythene

Part Number

A Inches Metric

B Inches Metric

C Inches Metric

Bag Quantity

SP98004 0.531 13.49 0.290 7.37 0.218 5.54 5,000

SP98008 0.957 24.31 0.630 16.00 0.218 5.54 5,000

SP98012 0.656 16.66 0.415 10.54 0.218 5.54 5,000

SP98013 1.082 27.48 0.770 19.56 0.218 5.54 5,000

SP98014 0.801 20.35 0.545 13.84 0.218 5.54 5,000

Range 2 Heavy Duty Orange LD Polythene

Part Number

A Inches Metric

B Inches Metric

C Inches Metric

Bag Quantity

713 0.530 13.49 0.265 6.73 0.175 4.56 3,000

292 0.562 14.27 0.320 8.12 0.175 4.56 2,000

749 0.625 15.87 0.312 7.92 0.175 4.56 2,000

502 0.589 14.96 0.320 8.12 0.175 4.56 2,000

293 0.719 18.26 0.445 11.30 0.175 4.56 2,000

638 0.775 19.68 0.280 7.11 0.175 4.56 3,000

503 0.761 22.04 0.445 11.30 0.175 4.56 3,000

294 0.859 19.32 0.575 14.60 0.175 4.56 2,000

504 0.870 19.32 0.575 14.60 0.175 4.56 2,000

750 0.970 24.63 0.560 14.22 0.175 4.56 1,500

295 0.984 24.99 0.700 17.78 0.175 4.56 1,600

505 1.042 26.46 0.700 17.78 0.175 4.56 2,000

296 1.156 29.36 0.828 21.03 0.175 4.56 1,200

506 1.167 29.36 0.828 21.03 0.175 4.56 1,600

Back to Contents

Two great ranges of flanged washers designed to finish and protect Hydraulic hoses.

Page 65: Standard Parts Catalogue

65

Bundle End Caps

RED LD Polythene

Part Number

Tube Size (Millimeters)

No. of Tubes

Minimum Quantity

SP98054 15 10 3,000

SP98105 22 10 2,000

SP98065 28 10 1,000

SAE Flange Caps

Red LD Polythene

Part Number

A Inches Metric

B Inches Metric

E Inches Metric

SAE Inches Metric

Bag Quantity

SP98023 1.052 26.72 1.177 29.90 0.265 6.73 0.500 12.70 5, 000

SP98005 1.365 34.67 1.490 37.85 0.265 6.73 0.750 19.05 2,000

SP98006 1.615 41.02 1.740 44.20 0.315 8.00 1.000 25.40 2,500

SP98017 1.865 47.37 1.990 50.55 0.315 8.00 1.250 31.75 1,500

SP98024 2.240 56.90 2.365 60.07 0.315 8.00 1.500 38.10 1,500

Back to Contents

Protect the ends of tubes from damage during transit or storage. Tube End Caps

are available in a range of sizes and colours. The various colours may be used as

a key facilitating the identification of stock types and sizes.

Standard colour Red.

Available in other colours to order.

Page 66: Standard Parts Catalogue

66

Cable Ties

CV Series CV Series Standard Cable Ties

Part

Number

Length

Metric Inches

Width

Metric

Max Bundle Dia

Metric

Min Tensile Strength Ibs (kgs)

Part

Number

Length Metric Inches

Width Metric

Max Bundle Dia Metric

Min Tensile Strength Ibs (Kgs)

CV-075 75 3 2.4 18 CV-120L 120 4-3/4 4.8 30

CV-094 96 3-3/4 2.5 23 CV-160L 160 6-1/4 4.8 42

CV-100 100 4 2.5 25 CV-180 180 7 4.0 49

CV-120S 120 4-3/4 2.5 30 18 (8) CV-190 190 7-1/2 4.8 52

CV140S 142 5-1/2 2.5 35 CV-200 203 8 4.0 55

CV-165 165 6-1/2 2.5 44 CV-250 250 10 4.8 74 50 (22)

CV-200M 203 8 2.5 55 CV-280 280 11 4.8 81

CV-120 120 4-3/4 3.2 30 CV-310 310 12 4.8 89

CV-140 142 5-1/2 3.6 35 CV-368 368 14-1/2 4.8 102

CV-150 150 6 3.6 39 CV-385 385 15-3/16 4.8 116

CV-200S 203 8 3.2 55 CV-432 432 17 4.8 125

CV-200A 203 8 3.6 55 40 (18) CV-450M 450 17-3/4 4.8 130

CV-250M 250 10 3.6 74

CV-265 265 10-1/2 3.6 78

CV-292 292 11-1/2 3.6 85

CV-330 331 13 3.6 96

CV-368S 368 14-1/2 3.6 102

Back to Contents

Packed in 100’s or 1000’s

UL Approved

Available in Natural or UV resistant Black Nylon 66.

Page 67: Standard Parts Catalogue

67

Protective Sleeving

Back to Contents

Part Number

Colour Diameter (mm)

Min Diameter (mm)

Max (m)

Roll Length MD

Rolls (per box)

TP5 Clear 7 15 200 4

TP10 Violet 10 20 200 4

TP15 Light Blue 15 30 200 4

TP20 Blue 25 50 200 4

TP45 Blue 35 80 200 2

TP50 Yellow 35 70 200 2

TP75 Brown 50 75 200 2

TP95 Pink 50 100 200 2

TP100 Red 50 100 200 2

TP140 Ochre 70 160 200 2

TP150 Orange 75 150 50 2

TP180 Light Green 125 200 50 2

TP200 Dark Green 100 200 200 2

TP210 Black 120 250 200 2

TP220 Clear 125 250 100 2

Protective sleeving provides a practical, efficient and cost effective solution to the problems of surface damage to components during

manufacture, storage and transit. Available in a range of colour-coded sizes, the mesh is flexible enough to mould around irregular-shaped

items yet tough enough to withstand knocks and scratches and unlike traditional materials such as waxed paper, it can be used again and

again.

Manufactured from polyethylene in a tube form in a range of diameters from 7mm to 400mm. Protective sleeving is resistant to acids and

solvents and unaffected by oils and grease making it ideal for protecting machine parts in an engineering environment. Other applications

include protecting damage-prone items such as ceramics, glass and sanitary-ware.

Page 68: Standard Parts Catalogue

68

Protective Sleeving (continued from previous page)

Back to Contents

Part Number

Colour Diameter (mm)

Min Diameter (mm)

Max (m)

Roll Length MD

49012017 Orange 6 17 250

49011201 Black 10 25 250

49012227 Violet 18 60 50

49013010 Pink (high stretch) 20 45 50

49013108 Purple (high stretch) 40 80 50

49012318 Red 50 100 50

49013220 Green (high stretch) 75 125 25

49012419 Yellow 100 200 50

49011224 Royal Blue (Heavy Duty)

190 225 25

49012524 Blue 200 400 50

Page 69: Standard Parts Catalogue

69

Materials and Properties

Properties and Materials

Low Density Polythene

High Density Polythene

Polypropylene Polystyrene Flexible PVC

Santoprene TPR

Nylon 66 Glass Filled Nylon

Silicone Rubber

Acetal ABS

Specific Gravity .915-.924 .941-.965 0.90-0.91 1.03-1.05 1.14-1.45 0.98 1.13-1.14 1.39 1.10-1.14 1.41 1.01-1.10

Operating Temperature: oC Minimum

oC Maximum

-30o

50o

-60o

60o

-25o

110o

-20o

65o

STD

-35o

149o

HT

-35o

190o

-40o

90o

-40o

100o

-40o

100o

-60o

260o

-50o

90o

93o

Elongation % 50-850 200-800 220-600 1-60 200-500 375-390 60-300 3 300-800 15-75 10-40

Tensile Bar Strength PSI

62-158 600-2,300

117-378 1,700-5,500

275-378 4,000-5,500

3,000 7,000

69-241 1,000-3,500

980 1,100

688-812 10,000-11,800

1,720 25,000

1,230-1,250

607-688 8,825-10,000

206-619 3,000-9,000

Water Absorption % 0.01 0.01 0.03 0.1-0.75 0.1-0.75 0 1.30 0.60 0 0.22 0.2-0.45

Effect of Sunlight Crazes Rapidly

Crazes Rapidly

Crazes Rapidly

Discolours Slightly

Resistant Very Resistant

Discolours Slightly

Discolours Slightly

Very Resistant

Crazes unless Stabilizied

Discolours Slightly

Effect of Weak Acids Very Resistant

Very Resistant

None Resistant Very Resistant

Resistant Resistant Resistant Resistant Very Resistant

Very Resistant

Effect of Strong Acids Attacked by slowly

oxidising acids

Attacked by slowly

oxidising acids

Attacked by slowly oxidising

acids

Attacked by slowly

oxidising acids

Resistant to most

Resistant Attacked Attacked Resistant Attacked Attacked

Effect of Weak Alkalies

Very Resistant

Very Resistant

None Resistant Very Resistant

Very Resistant

None None Resistant Very Resistant

Very Resistant

Effect of Strong Alkalies

Very Resistant

Very Resistant

Very Resistant

Resistant to most

Very Resistant

Very Resistant

None None Resistant Very Resistant

Very Resistant

Effect of Organic Solvents

Resistant below

60o

Resistant below

80o

Resistant Below

80o

Soluble to most

Attacked by most

Attacked by some

Resists most

Resists most

Resistant Very Resistant

Attacked by some

Effect of Oil/Grease

Attacked by some

Slight Attacked by some

Attacked by some

Attacked by some

Attacked by some

None None Attacked by some

None Slight

*The above figures should be used as a guide only, figures for specific grades and types of material may differ from those shown.

Back to Contents

Page 70: Standard Parts Catalogue

70

Conversion Table

Millimeters Inches Decimal Millimeters Inches Decimal Millimeters Inches Decimal

0.40 1/16 0.02 8.73 11/32 0.34 17.46 11/16 0.69

0.79 1/32 0.03 9.13 23/64 0.35 17.85 45/64 0.70

1.19 3/64 0.05 9.52 3/8 0.38 18.26 23/32 0.72

1.59 1/16 0.06 9.92 25/64 0.39 18.65 47/64 0.73

1.98 5/64 0.08 10.32 13/32 0.41 19.05 3/4 0.75

2.38 3/32 0.09 10.72 27/64 0.42 19.45 49/64 0.77

2.78 7/64 0.11 11.11 7/16 0.44 19.84 25/32 0.78

3.17 1/8 0.13 11.51 29/64 0.45 20.24 51/64 0.80

3.57 9/64 0.14 11.91 15/32 0.47 20.63 13/16 0.81

3.97 5/32 0.16 12.30 31/64 0.48 21.03 53/64 0.83

4.36 11/64 0.17 12.70 1/2 0.50 21.43 27/32 0.84

4.76 3/16 0.18 13.10 33/64 0.52 21.83 55/64 0.86

5.16 13/64 0.20 13.49 17/32 0.53 22.23 7/8 0.87

5.56 7/32 0.22 13.89 35/64 0.55 22.62 57/64 0.89

5.95 15/64 0.23 14.29 9/16 0.56 23.02 29/32 0.91

6.35 1/4 0.25 14.68 37/64 0.58 23.42 59/64 0.92

6.75 17/64 0.27 15.08 19/32 0.59 23.81 15/16 0.94

7.14 9/32 0.28 15.48 39/64 0.61 24.21 61./64 0.95

7.54 19/64 0.30 15.88 5/8 0.63 24.61 31.32 0.97

7.94 5/16 0.31 16.27 41/64 0.64 25.00 63.64 0.98

8.33 21/64 0.33 16.67 21/32 0.66 25.40 1 1.00

17.07 43/64 0.67

Back to Contents