Top Banner
www.nordgreif.com STANDARD LASTAUFNAHME MITTEL GREIFBARE PERFEKTION STANDARD LOAD HANDLING DEVICES Klemmen Clamps Zangen Tongs Traversen Lifting Beams C-Haken C Hooks Spreizen Spreader Beams
40

STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

May 07, 2018

Download

Documents

hathu
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

www.nordgreif.com

STANDARDLASTAUFNAHME

MITTELGREIFBARE PERFEKTION

STANDARDLOAD HANDLING

DEVICES

Klemmen ClampsZangen TongsTraversen Lifting BeamsC-Haken C HooksSpreizen Spreader Beams

Page 2: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

2 INFO | NORDGREIF.COM

NORDGREIFTechnology for the process, safety for people.

For us everything revolves around lifting and transporting heavyloads. Nordgreif designs and produces customised special lift-ing equipment precisely in line with customers‘ needs. Tongs,grabbers, cross beams and manoeuvring devices with mechani-cal, electrical or hydraulic drive are all built at our site near Ham-burg. Customer-oriented advice and individual planning is our particu-lar strength. Thanks to our years of experience, we are also in aposition to supply complex special solutions. Following precise

NORDGREIFTechnik für die Praxis, Sicherheit für den Mensch.

Bei uns dreht sich alles um das Heben und Transportierenschwerer Lasten. Nordgreif plant und fertigt Sonderlastaufnah-memittel genau nach Kundenwunsch. Zangen, Greifer, Traversenund Wendevorrichtungen mit mechanischem, elektrischem oderhydraulischem Antrieb, werden an unserem Standort bei Ham-burg gebaut. Unsere besondere Stärke ist unsere kundenorientierte Beratungund individuelle Planung. Durch unsere langjährige Erfahrung,sind wir in der Lage auch komplexe Sonderlösungen zu liefern.Nach genauer Analyse des Arbeitsablaufes beim Heben und derGegebenheiten vor Ort erstellen wir ein maßgeschneidertesKonzept für jedes individuelle Hebe-Problem. Dabei ist IhreSicherheit unser oberstes Gebot. Wir denken das Undenkbareim Vorfeld und schließen schon in der Konstruktionsphasemögliche Risiken aus. Dabei spielen auch ergonomische Fak-toren eine Rolle: Je einfacher die Bedienung ist, je über-sichtlicher die Steuerung, desto sicherer ist die Arbeit. Technikfür die Praxis, Sicherheit für den Mensch.

Wachsender Zeit- und Kostendruck erfordert eine effiziente Ar-beitsweise. Unsere Lastaufnahmemittel helfen Ihnen, Ihre Las-ten schnell und sicher zu transportieren. Das richtige Werkzeugspart kostbare Zeit! Unsere Geräte werden für eine langeLebensdauer, praxisgerecht und robust ausgelegt. So halten sie selbst extremster Beanspruchung dauerhaft stand.

Wir konstruieren und visualisieren unsere Lastaufnahmemittelauf modernen 3D-CAD-Systemen und führen statische Berech-

nungen im FEM-Verfahren durch. Alle Lastaufnahmemittel wer-den entsprechend den sicherheitstechnischen Vorschriften derBGR 500, der DIN 15018 und DIN EN 13155 ausgelegt unddokumentiert. Das Schweißen erfolgt nach DIN 18800 durchgeprüfte Schweißer. Alle Geräte werden mit umfangreicherDokumentation, CE-Zeichen und Werkszeugnis weltweit aus-geliefert.

Die folgenden Seiten geben Ihnen einen Überblick über diewichtigsten Lastaufnahmemittel und Lösungsansätze für unter-schiedliche Hebe-Probleme. Außerdem zeigen wir Ihnen dasbreite Spektrum unserer Möglichkeiten und stellen Ihnen inter-essante Projekte vor, die wir international realisiert haben.

Wir freuen uns auf Ihren Anruf!

STANDARD LASTAUFNAHMEMITTELGREIFBARE PERFEKTION – NORDGREIF

NORDGREIFSTANDARD LOAD HANDLING DEVICES

Page 3: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

3INFO | NORDGREIF.COM

Direkt, kundenorientiert undeffizient in Planung, Beratung und Fertigung.

Direct, customer-oriented andefficient in planning, consultancy and manufacturing.

Infoline: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22E-Mail: [email protected]: www.nordgreif.com

analysis of the operating process and the local factors, wecreate a bespoke concept for each individual lifting problem.Your safety is our top priority. We think the unthinkable in ad-vance and exclude any potential risks during the constructionphase. Ergonomic factors are also taken into account: the sim-pler something is to use and the clearer it is to control, thesafer it is to work with. Technology for the process, safety forpeople.

Growing time and cost pressure requires an efficient workprocess. Our load suspension equipment will help you to moveyour loads quickly and safely. The right tool saves valuable time!Our devices are designed for to be robust for a long service lifein specific conditions. They can even withstand extreme loadsfor extended periods of time.

We devise and visualise our load suspension equipment usingmodern 3D CAD systems and perform design calculations usingthe FEM process. All load suspension equipment is designedand documented in accordance with the safety regulations fromBGR 500, DIN 15018 and DIN EN 13155. Welding is performedby certified welders in accordance with DIN 18800. All equip-ment is supplied worldwide with comprehensive documentation,CE mark and factory certification.

The following pages will give you an overview of our most im-portant load suspension equipment and solutions to variouslifting problems. You will also see the broad range of our possi-bilities and some interesting international projects thatwe have realised.

We look forward to your call!

HebeklemmenLifting Clamps

TrägerklemmenTrägerklemmen

FasshandlingDrum Handling

SpreizenSpreader Beams

DrahtcoilzangenWire Coil Tongs

C-HakenCoil Hooks

ZangenTongs

TraversenLifting Beams

Page 4: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

4 INFO | NORDGREIF.COM

Sicherheitshebeklemmen für den vertikalenBlechtransport und zum Wenden und Aufrichten 8Safety clamps for vertical sheet transport and for turning and straightening Sicherheitshebeklemmen mit kardanischerAufhängung 9Safety clamps with gimballed attachment Sicherheitshebeklemmen für Trägerprofile 9-10Safety clamps for beam profiles Sicherheitshebeklemmen für den horizontalen Blechtransport 10-11Safety clamps for horizontal sheet transport Sicherheitshebeklemmen mit glatter Greifplatte 11Safety clamps with smooth grab plates Sicherheitshebeklemmen mit Schutzbelag 12Safety clamps with protective cover Sicherheitshebeklemmen für Blechpakete 12Safety clamps for sheet boards Innen-Trägerklemmen 12Inner beam clampsSicherheitshebeklemmen für Trägertransport und Lagerung 13Safety clamps for beam transport and storage Sicherheitshebeklemmen für Träger und Profile mit kardanischer Aufhängung 13Safety clamps for beams and profiles with gimballed attachment Sicherheitshebeklemmen für Bleche, Profile und Rohre 14Safety clamps for sheets, profiles and pipes Sicherheitshebeklemmen für Platten, Bleche und Profile 14Safety clamps for plates, sheets and profiles Sicherheitshebeklemmen für Spundbohlen mit Fernentriegelung 15Safety clamps for sheet piles with remote unlocking Schraubklemmen 15Screw Clamps Betonrohrgehänge 16Concrete pipe attachment

HebeklemmenLifting Clamps

INHALTSVERZEICHNIS CONTENTS

Trägerklemmen mit Fahrwerk Typ TF 17Beam Clamp with Chassis Type TFTrägerklemmen ohne Fahrwerk Typ T 17Beam Clamp without Chassis Type T

TrägerklemmenBeam Clamps

Drahtcoilinnenzangen 18Wire Coil Inner TongsDrahtcoilaussenzangen 18Wire Coil Outer Tongs

DrahtcoilzangenWire Coil Tongs

Rundprofilzangen 19Round profile tongsRechteckprofilzangen 19Rectangular profile tongsZangen für Ballen und Kisten 20Tongs for bales and boxesLagerkastenzangen 20Stock box tongsWendezangen 21Turning tongsSchienenzangen 21Rail tongsKartonzangen 22Cardboard tongsHolzstammzangen 22Log tongsProfilzangen für Steinblöcke 23Profile tongs for stone blocksTrägerzangen 23Beam Tongs

ZangenTongs

Page 5: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

5INFO | NORDGREIF.COM

Fasszangen 24Drum tongsFasszangen für liegende Fässer 24Drum tongs for horizontal drumsFassgeschirr zum Aufrichten, Transportierenund Kippen von Stahlfässern 25Drum gear (FHZ) to straighten, transport and tip steel drums

FasshandlingDrum Handling

Coil-Haken mit Gegengewichtsausgleich 26-27Coil hooks with counterweight balanceCoil-Haken mit Kettenaufhängung 27Coil hooks with chain attachmentCoil-Haken mit Federschwerpunktausgleich 28Coil hooks with spring centroidal balanceCoil-Kipphaken 28Tipping coil hooks

C-HakenCoil Hooks

Traversen starr 29Lifting beams, rigidTraversen verstellbar 30Lifting beams, adjustableAuslegertraversen verstellbar 31Lifting beam adjustable Traversen für Gitterboxen 31Lifting beams for skeleton containers Gabelstaplerschuhe 31Forklift shoes

TraversenLifting Beams

Spreize starr und verstellbar 32Stays, rigid and adjustable Spreize starr mit Schaukelstück 32Spreader Beams, fixed, with rocker Spreize verstellbar mit Schaukelstück 32Spreader Beams, adjustable, with rockerSpreize starr mit Pendelstück 32Spreader Beams, fixed, with pendular suspension lugs Spreize verstellbar mit Schaukelstück 32Spreader Beams, adjustable with pendular suspension lugs

Spreizen / SpreiztraversenSpreader Beams

Page 6: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Belastung / Load:

I

II

III

IV

V

100% 75% 50%

Belastungsschema bei Schrägzug (Einschränkung der Tragfähigkeit) / For load train for diagonal pull

K11

K20

K10

K15

K22 K23

K15 K17

K16 K26

K12 K13 K19

K24 K27

HebeklemmenLifting Clamps

6 INFO | NORDGREIF.COM

Page 7: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

HebeklemmenLifting Clamps

Ersatzteilliste für TypenReplacement parts list for housing typesK10, K11, K12, K13, K16, K20, K22, K23, K24

Gehäuse / Body

Aufhänger / Lifting eye

Aufhängebolzen / Suspension boltTraggelenk / Lifting joint

Traggelenkbolze /Lifting joint boltZwischengelenkbolzen /Intermediate joint boltExzenter mit BolzenCan with bolt

Feder / Spring

Zwischengelenkbolzen /Intermediate joint boltZwischengelenk /Intermediate jointPallenbolzen / Jaw bolt

Palle / Pad with screw

Rosette mit SchraubeRosette with screw

7INFO | NORDGREIF.COM

Page 8: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K10 Sicherheitshebeklemmen für den vertikalen Blechtrans-port und zum Wenden und AufrichtenDie Klemme eignet sich sehr gut zum vertikalen Blechtransport von einzelnenBlechen. Um eine sichere Handhabung zu gewährleisten verfügt die Klemmeüber einen Vorspannmechanismus, der die verzahnte Greifpalle über Federkraftbereits vor dem eigentlichen Hebevorgang fest gegen das zu hebende Blechdrückt und dadurch ein Abrutschen der Klemme verhindert. Ein Öffnen der Hebeklemme bei unbeabsichtigter Entlastung ist somit aus-geschlossen. Wegen der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.Daher muss man auch geringe Greifspuren an der Last berücksichtigen. DieBlechoberfläche bzw. die Blechhärte muss unter HRC40 liegen. Bei Schrägzugreduziert sich die Tragefähigkeit der Klemme. Bei längeren Blechen empfehlenwir den paarweisen Einsatz, ein 2-Stranggehänge oder in Kombination miteiner Koppeltraverse.

K10 Safety clamps for vertical sheet transportand for turning and straighteningThe clamps are very suitable for vertical sheet transport of individual sheets. To guarantee secure handling the clamps have a tension mechanism, whichpresses the serrated grab pawl against the sheet to be lifted before the actuallifting process using spring resistance and, in so doing, prevents the clampsfrom slipping. Therefore, it is not possible to open the lifting clamp for unintentional loads. Because of the micro-serrated round anchor plates and the pawl, a microformclosure arises, as the anchor plates and pawl press on the material of the load.Therefore, even small grab tracks must be taken into account on the load. Thesheet surface or thickness must be less than HRC 40. The load bearing capa-city of the clamps is reduced in the event of diagonal pull. We recommendusing the pair method for longer sheets, a 2-leg attachment or in combinationwith a coupling lifting beam.

Tragfähigkeit in kgLoad capacity in kg

200200750

100010001000

15002500250025002500

30005000500050005000

1000010000

Typ Bestell-Nr.Type Part No.

NG-K10002015NG-K10002025NG-K10007015NG-K10010020NG-K10010050NG-K10010075

NG-K10015020NG-K10025030NG-K10025050NG-K10025075NG-K10025100

NG-K10030030NG-K10050050NG-K10050075NG-K10050100NG-K10050150NG-K10100060NG-K10100100

ca. Maße in mm / Dimensions approx. (mm)A

0 - 1510 - 250 - 150 - 200 - 500 - 75

0 - 200 - 300 - 500 - 75

25 - 100

0 - 300 - 5025 - 7550 - 10050 - 1500 - 50

50 - 100

B

282834586565

5865657070

7080808585110110

F

95105100160230250

165200230265290

210250275350400320360

H

150150185240300360

250290320340340

335340380540540420450

I

45454565115110

6585115115115

90115125150150125135

V

404050757575

7585858585

85100100100100100110

1,51,52,54812

68101112

12161724263145

Eig.-Gew. ca. kgWeight approx. kg

8 INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

8 INFO | NORDGREIF.COM

Page 9: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K11 Sicherheitshebeklemmen mitkardanischer Aufhängung

Der Grundaufbau dieser Klemme ist wie die o.a. Klemme des TypsK10, jedoch verfügt diese Klemme zusätzlich über ein kardanischesGelenk, um Seitenkraft besser aufnehmen zu können.

K11 Safety clamps with gimballed attachment

The basic design of this clamp is like the aforementioned clamp ofthe K10 type, but this clamp also has a gimballed hinge to applylateral force better.

Tragfähigkeit in kgLoad capacity in kg

200750

1000150025005000

Typ Bestell-Nr.Type Part No.

NG-K11002015NG-K11007015NG-K11010020NG-K11015020NG-K11025030NG-K11050050

ca. Maße in mm / Dimensions approx. (mm)A

0 - 150 - 150 - 200 - 200 - 300 - 50

B

283458586580

F

95100160165200250

H

150185240250290340

I

4545656585115

V

4050757585100

23571018

Eig.-Gew. ca. kgWeight approx. kg

K12 Sicherheitshebeklemmen für TrägerprofileTyp K 12 mit Sicherheitsarretierung. In geöffneter und geschlossenerStellung verriegelbar. Besonders geeignet für den horizontalen Transport.Die Aufhängeöse liegt im Trägerschwerpunkt. Universell einsetzbar, auchpaarweise stirnseitig an Stahlträgern.Lieferbar auch mit kardanischer Aufhängung. Diese Ausführung eignetsich besonders für das paarweise Anschlagen von Stahlschweißkonstruk-tionen.

K12 Safety clamps for beam profilesType K12 with safety lock. Can be locked in open and closed position.Particularly suitable for horizontal transport. The suspension eyes are at the beam‘s centre of gravity. Universal appli-cations, also in pairs on the face of steel beams. Can also be supplied with gimballed attachment. This design isparticularly suitable for paired attachment of welded steel constructions.

Tragfähigkeit in kgLoad capacity in kg

10002500500010000

Typ Bestell-Nr.Type Part No.

NG-K12010020NG-K12025030NG-K12050050NG-K12100060

ca. Maße in mm / Dimensions approx. (mm)A

5 - 208 - 3010 - 5010 - 60

B

6085105115

F

195280360380

H

280380460600

I

85140150150

V

7585100110

7101260

Eig.-Gew. ca. kgWeight approx. kg

9INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

9INFO | NORDGREIF.COM

Page 10: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K13 Sicherheitshebeklemmen für TrägerprofileTyp K 13 mit Sicherheitsarretierung. In geöffneter und geschlossenerStellung verriegelbar. Besonders geeignet für den Transport von T-, Doppel-T- und U-Trägern in vertikaler Flanschlage. Wegen ihrer hohenPresskraft eignen sich diese Hebeklemmen hervorragend zum Wendenvon Trägern.

K13 Safety clamps for beam profilesType K13 with safety lock. Can be locked in open and closed position. Particularly suitable for transport of T, Double-T and U beams in verticalflange bearing. Because of their high force of pressure, these liftingclamps are excellent for turning beams.

Tragfähigkeit in kgLoad capacity in kg

100025004000

Typ Bestell-Nr.Type Part No.

NG-K13010015NG-K13025030NG-K13040032

ca. Maße in mm / Dimensions approx. (mm)A

5 - 1510 - 2710 - 32

B

709090

F

195235280

H

230310400

I

607075

V

758585

61018

Eig.-Gew. ca. kgWeight approx. kg

Tragfähigkeit in kg/PaarPair capacity (kg)

100015002500300050006000800012000

Typ Bestell-Nr.Type Part No.

NG-K15010040NG-K15015050NG-K15025050NG-K15030070NG-K15050060NG-K15060051NG-K15080065NG-K15120100

ca. Maße in mm / Dimensions approx. (mm)A

0 - 405 - 505 - 505 - 705 - 605 - 510 - 650 - 100

B

1515152020255570

C

15001500150015001500150015001500

F

150160170185205230265280

I

95110110125125150175170

L

10001000100010001000100010001000

34

4,51012131835

Eig.-Gew. ca. kg pro Stk.Weight approx. kg per pce.Ø

1618182223363636

V

1618182222363636

K15 Sicherheitshebeklemmen für denhorizontalen BlechtransportDiese Hebeklemmen sind für den paarweisen Einsatz vorgese-hen. Besondere Eignung für den Transport formstabiler Bleche,Blechpakete und Stahlplatten. Durch Verzahnung der Palle wirdein sicheres Greifen der Bleche selbst bei Schräghanggewährleistet. Bei langen Blechen empfehlen wir 2-Paar-Trag-klemmen in Verbindung mit einer Traverse. Bei einemNeigungswinkel größer als 60° verringert sich die Traglast.

K15 Safety clamps for horizontal sheet transportThese lifting clamps are equipped for use in pairs. Particularlysuitable for transporting stable sheets, sheet boards and steelplates. The serration of the pawl ensures secure grab of thesheets even on a diagonal slope. We recommend 2-pair bearer clamps combined with a liftingbeam for long sheets. The bearing load is reduced witha slope angle greater than 60°.

NeigungswinkelWorking angle

30°- 60°60°- 90°90°-120°

TragfähigkeitLoad capacity

100 %70 %50 %

Achtung:Bei Horizontal-Hebeklemmen reduziert sichdie Tragfähigkeit entsprechend demSpreizwinkel. Dies gilt für alle Typen.

Caution:With lifting clamps for horizontaltransport, the load capacity is reducedin accordance with the working angle. This applies to alltypes.

10 INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

Page 11: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K16 Sicherheitshebeklemmen mit glatterGreifplatte

Tragklemme mit Sicherheitsarretierung und glatter großer Andruckplatte fürBleche mit empfindlicher Oberfläche für den vertikalen Transport und zumAufrichten bzw. Ablegen um 90°. Diese Hebeklemme hat eine hohe An-presskraft. Sie wirkt rein kraftschlüssig, ist jedoch nur geeignet für trock-ene, saubere und schmiermittelfreie Oberflächen. Ab einer Tragfähigkeitvon 2,5 t wird der Greifbereich mittels einer Stellschraube vorjustiert.

K16 Safety clamps with smooth grab plates

Bearer clamps with safety lock and smooth, large pressure plate for sheetswith sensitive surfaces for vertical transport and straightening or tilting by90°. These bearer clamps have high force of pressure. They are purely acti-vated by gravity, but are only suitable for dry, clean and lubricant-free sur-faces. From a load capacity of 2.5 t, the grab range is preadjusted using alocking screw.

Tragfähigkeit in kg/StückLoad capacity in kg/pce.

2505005001000150025005000

Typ Bestell-Nr.Type Part No.

NG-K16002050NG-K16005010NG-K16005050NG-K16010015NG-K16015020NG-K16025030NG-K16050050

ca. Maße in mm / Dimensions approx. (mm)A

10 - 500 - 1010 - 500 - 150 - 200 - 305 - 50

B

50706075100120150

F

230210240250280300420

H

330250350300320400500

I

1158011590110130140

V

60607575758590

87109123687

Eig.-Gew. ca. kgWeight approx. kg

11INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

K15 Sicherheitshebeklemmen für denhorizontalen BlechtransportDiese Hebeklemmen sind für den paarweisen Einsatz vorgesehen. Sie habeneinen großen Greifbereich und sind daher besonders gut geeignet für denTransport von Grob- und Feinblechpaketen.

K15 Safety clamps for horizontal sheet transportThese lifting clamps are equipped for use in pairs. They have a large grabrange and, therefore, are very well suited to transporting thick and fine sheetboards.

Tragfähigkeit in kg/PaarPair capacity (kg)

250025005000500050007500

Typ Bestell-Nr.Type Part No.

NG-K15025100NG-K15025150NG-K15050100NG-K15050150NG-K15050250NG-K15075250

ca. Maße in mm / Dimensions approx. (mm)A

5 - 10050 - 1505 - 10050 - 150100 - 250100 - 250

B

152020303055

F

230230250270270290

I

150150150150150170

V

253131313136

141620203535

Eig.-Gew. ca. kgpro Stk.Weight appr. kg per pce.

Page 12: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K19 Innen-TrägerklemmenHebeklemme Typ K 19 als innengreifende Hebeklemme fürBreitflanschträger, die ineinander und dicht an dicht gestapeltwerden sollen.

K19 Inner beam clampsLifting clamps type K 19 as inward grabbing lifting clamp forwide flange beams, which are to be stacked inside one anotherand close together.

V

H

A

Tragfähigkeit in kgLoad capacity in kg

500100015003000

Typ Bestell-Nr.Type Part No.

NG-K19005012NG-K19010016NG-K19015018NG-K19030022

ca. Maße in mm / Dimensions approx. (mm)A

100 - 120120 - 160140 - 180180 - 220

H

220280300350

V

60707585

35816

Eig.-Gew. ca. kgWeight approx. kg

12 INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

K18 Sicherheitshebeklemmen für BlechpaketeTragklemme für den horizontalen Transport von Blechen undBlechpaketen. Mit einem Steckbolzen lässt sich der Greifbe-reich schnell von 0 - 420 mm verstellen. Der jeweilige Klemm-bereich beträgt 60 mm. Diese Hebeklemmen sind für denpaarweisen Einsatz vorgesehen. Der zulässige seitlicheSchrägzug beträgt max. 10°. Die Tragkraft muss entsprechenddem Neigungswinkel reduziert werden (s. Tabelle Seite 18).

K18 Safety clamps for sheet boardsBearer clamps for horizontal transport of sheets andsheet boards. The grab range can quickly be adjustedfrom 0 - 420 mm using a locking pin. Each clamp rangeis 60 mm. These lifting clamps are equipped for use inpairs. The permitted lateral diagonal pull is max. 10°. The bearing force must be reduced in accordance withthe slope angle (see table page 18).

Tragfähigkeit in kg/PaarPair capacity (kg)

1000150030003000300060006000

Typ Bestell-Nr.Type Part No.

NG-K18010150NG-K18015300NG-K18030180NG-K18030300NG-K18030420NG-K18060180NG-K18060300

ca. Maße in mm / Dimensions approx. (mm)A

0 - 1500 - 3000 - 1800 - 3000 - 4200 - 1800 - 300

B

12152020203030

F

170180200200200230230

H

250400300420550350470

I

110110120120120120120

V

25253030303030

10121218151921

Eig.-Gew. ca. kg/Stk.Weight approx. kg/pce.

K17 Sicherheitshebeklemmen mit SchutzbelagTragklemme für den paarweisen Einsatz von Platten undBlechen mit empfindlicher Oberfläche. Die Andruckplatte ist miteinem Schutzbelag versehen.

K17 Safety clamps with protective coverBearer clamps for use in pairs of plates and sheets withsensitive surfaces. The pressure plate is equipped with aprotective cover.

Tragfähigkeit in kg/PaarPair capacity (kg)

250500

10002500

Typ Bestell-Nr.Type Part No.

NG-K17002030NG-K17005030NG-K17010040NG-K17025050

ca. Maße in mm / Dimensions approx. (mm)A

0 - 300 - 300 - 400 - 50

B

10121520

F

150160200220

H

100120160180

I

100100130130

V

17171725

35710

Eig.-Gew. ca. kg/Stk.Weight approx. kg/pce.

Page 13: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K20 Sicherheitshebeklemmen für Trägertransportund LagerungDie Träger-Sicherheitshebeklemme Typ K 20 eignet sich beson-ders für den horizontalen Transport und zum Aus- und Ein-lagern von Trägern. Sie ist in geöffneter und geschlossenerStellung verriegelbar.

K20 Safety clamps for beam transportand storageThe beam safety clamps type K 20 are particularly suitable forhorizontal beam transport and getting beams in and out ofstorage. It can be locked in open and closed position.

Tragf. in kgLoad capacity

kg

50010002500

Typ Bestell-Nr.Type Part No.

NG-K20005015NG-K20010025NG-K20025028

ca. Maße in mm / Dimensions approx. (mm)A

5 - 155 - 255 - 28

für Trägerbreitenfor beam wide

80 - 160100 - 220200 - 380

B

506070

F

130175220

H

200300400

I

426075

V

607085

5718

Eig.-Gew. ca. kgWeight approx. kg

K21 Sicherheitshebeklemmen für Träger und Profile mitkardanischer AufhängungTragklemme mit Sicherheitsarretierung und Federvorspannung. Durch diekardanische Aufhängung ist diese Hebe-klemme besonders für seitlichenSchrägzug geeignet. Die Aufhängung ist in alle Richtungen schwenkbar, wodurch eine allseitigeZugbelastung möglich ist. Dadurch ist dieser Typ besonders geeignet zumTransport von langen Trägern, Profilen und Stahlkonstruktionen. Beiseitlicher Querbelastung reduziert sich die Tragfähigkeit gemäß Skizze. Beilängeren Stahlbauelementen: paarweiser Einsatz im Zweistangengehängeohne Spreiztraverse möglich.

K21 Safety clamps for beams and profileswith gimballed attachmentBearer clamp with safety lock and spring tensioning. This lifting clamp is particularly suitable for lateral diagonal pull because ofthe gimballed attachment. The attachment can be moved in all directions, sotensile loading is possible from all sides. As a result, this type is particularlysuitable for transporting long beams, profiles and steel constructions. For lateral shunt loading the load capacity is reduced as per the sketch.Paired use in the two-bar attachment is possible without spreader liftingbeam for longer structural steel elements.

Tragfähigkeit in kgLoad capacity in kg

10002500350045006000

Typ Bestell-Nr.Type Part No.

NG-K21010020NG-K21025030NG-K21035035NG-K21045040NG-K21060050

ca. Maße in mm / Dimensions approx. (mm)A

5 - 205 - 3010 - 3510 - 4015 - 50

B

65808595105

F

195230260320380

H

300350390450480

I

85105110120130

V

708585100100

815313740

Eig.-Gew. ca. kgWeight approx. kg

13INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

Page 14: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K22 Sicherheitshebeklemmen für Bleche, Profileund RohreUniversalhebeklemme für den horizontalen Transport vonProfilen, Platten, Blechen und Rohren. Für die stirnseitige Auf-nahme von Trägern ist das Gehäuse geschlitzt. Mit Sicherheit-sarretierung; in geöffneter und geschlossener Stellungverriegelbar. Bei paarweiser Verwendung ist ein max. Neigungswinkel von 60° zulässig. Bei Verringerung derTraglast: s. Tabelle Seite 18.

K22 Safety clamps for sheets, profiles and pipesUniversal lifting clamps for horizontal transport of sheets,plates and profiles. The housing is slit for frontal suspension ofbeams. With safety lock - can be locked in open and closed po-sition. The slope angle may only be up to max. 60° for paireduse. See table on page 18 to reduce the bearing load.

Tragfähigkeit in kgLoad capacity in kg

5001000150030004000

Typ Bestell-Nr.Type Part No.

NG-K22005025NG-K22010025NG-K22015030NG-K22030040NG-K22045040

ca. Maße in mm / Dimensions approx. (mm)A

0 - 250 - 250 - 300 - 400 - 40

B

5050607075

F

155190210230260

H

180200260300330

I

60608090100

V

6060758595

78101518

Eig.-Gew. ca. kgWeight approx. kg

K23 Sicherheitshebeklemmen für Platten, Bleche und ProfileHebeklemme für den horizontalen Transport von Blechen, Platten und Profilen. Ausführung mit Sicherheitsarretierung.Durch die Federvorspannung wird die Greifnocke an das Blechgedrückt. Dadurch ist - auch bei Zugentlastung oder beim Auf-setzen - ein sicheres Greifen gewährleistet. Bei paarweisemEinsatz ist der Neigungswinkel nur bis 60° zulässig.

K23 Safety clamps for plates, sheets and profiles

Lifting clamps for horizontal transport of sheets, plates andprofiles. Designed with safety lock. The grab cams are pressedagainst the sheet using spring tensioning. This guarantees asecure grip even in the event of stress relief or hitting theground. The slope angle may only be up to 60° for paired use.

Tragfähigkeit in kgLoad capacity in kg

50010001500200030004000

Typ Bestell-Nr.Type Part No.

NG-K23005020NG-K23010025NG-K23015035NG-K23020040NG-K23030045NG-K23040050

ca. Maße in mm / Dimensions approx. (mm)A

0 - 200 - 255 - 350 - 405 - 4510 - 50

B

101020253050

F

160170190220240240

H

180190230290330360

I

758095110120120

V

606075758080

8913121524

Eig.-Gew. ca. kgWeight approx. kg

14 INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

Page 15: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K26 SchraubklemmenUniversal-Schraubklemme zum Heben, Wenden um 180° und Ziehen vonBlechen, Trägern und Stahlkonstruktionen. Ausgestattet mit schwenkbarer,balliger Druckplatte - dadurch hohe Klemmung durch Keilwirkung.

K26 Screw ClampsUniversal screw clamps for lifting, turning by 180° and pulling sheets,beams and steel constructions. Equipped with movable, round pressureplates - result is good clamping through wedge effect.

K27 SchraubklemmenSchraubklemme mit seitlich schwenkbarer Aufhängeöse. Ausführung wieTyp K26; besonders geeignet für das Walzen von Blechen an Rundbiege-maschinen.

K27 Screw ClampsScrew clamps with lateral movable suspension eyes. Designed like typeK26; particularly suitable for rolling sheets on rounding machines.

Tragfähigkeit in kgLoad capacity in kg

500100015002000300050006000

Typ Bestell-Nr.Type Part No.

NG-K26005019NG-K26010030NG-K26015035NG-K26020100NG-K26030050NG-K26050080NG-K26060065

ca. Maße in mm / Dimensions approx. (mm)A

0 - 190 - 300 - 350 - 1000 - 500 - 800 - 65

B

505565707590100

F

170200250400350400380

H

240260350380380450490

I

60607080100110120

V

60606070707580

4581382023

Eig.-Gew. ca. kgWeight approx. kg

Tragfähigkeit in kgLoad capacity in kg

1000150030006000

Typ Bestell-Nr.Type Part No.

NG-K27010030NG-K27015035NG-K27030050NG-K27060065

ca. Maße in mm / Dimensions approx. (mm)A

0 - 300 - 350 - 500 - 65

B

556575100

F

200250350380

H

300400450550

I

6070100120

V

60607080

710925

Eig.-Gew. ca. kgWeight approx. kg

K24 Sicherheitshebeklemmen für Spundbohlenmit FernentriegelungDie Sicherheitshebeklemme für Spundbohlen ist geeignet,Spundbohlen um 90° zu wenden. Sie hat eine Fernentrie-gelung, womit die Hebeklemme vom Fußboden aus mittelsSeilzug in großer Höhe entriegelt werden kann.

K24 Safety clamps for sheet piles withremote unlockingThe safety clamps for sheet piles are suitable for turningsheet piles by 90°. It has remote unlocking, whereby thelifting clamps can be unlocked from the floor using a cablewinch at big heights.

Tragfähigkeit in kgLoad capacity in kg

25005000

Typ Bestell-Nr.Type Part No.

NG-K24025012NG-K24050020

ca. Maße in mm / Dimensions approx. (mm)A

1 - 121 - 20

B

6585

F

200250

H

350500

I

120155

V

85100

1118

Eig.-Gew. ca. kgWeight approx. kg

15INFO | NORDGREIF.COM

HebeklemmenLifting Clamps

Page 16: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

K28 BetonrohrgehängeDas 3-Strang-Betonrohrgehänge eignet sich für denvertikalen Transport von Betonringen.

Der Greifbereich ist über Steckbolzen voreinstellbar.

K28 Concrete pipe attachmentThe 3-leg concrete pipe attachment is suitable for verticaltransport of concrete rings.

The grab range can be pre-adjusted using locking pins.

Tragfähigkeit in kgLoad capacity in kg

150030003000

Typ Bestell-Nr.Type Part No.

NG-K28015120NG-K28030180NG-K28030220

ca. Maße in mm / Dimensions approx. (mm)A max.

120180220

B

170260260

Greifweite / Grab range

40 - 12050 - 18090 - 220

406075

Eig.-Gew. ca. kgWeight approx. kg

HebeklemmenLifting Clamps

16 INFO | NORDGREIF.COM

Page 17: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Trägerklemme mit Fahrwerk Typ TFTrägerklemmen mit Fahrwerk von 1.000 bis10.000 kg und fu r Trägerbreiten zwischen 64und 300 mm einsetzbar. Ideal fur Montage- undReparaturarbeiten, problemlos anzubringenund wieder zu entfernen. Geringes Eigen-gewicht, Laufrollen mit Präzisionskugellager.

Beam Clamp with Chassis Type TFSix models are available in load capacities from1,000 to 10,000 kg and for beam flange widthsbetween 64 and 300 mm. Ideal for assemblyand repair work, easy to attach and remove.Low deadweight, wheels with precision ball bearings.

Technische Änderungen vorbehalten. Subject to change without notice

Trägerklemme Typ TDer einfache und sichere Anschlagpunkt.Trägerklemmen mit veränderlichem Klemm-bereich sind ohne Montagewerkzeuge oder Hilfsmittel schnell und einfach an Trägeranzubringen. Mittels der Spannspindel werdendie Klemmbacken an den Träger gepreßt unddamit ist der Aufhängepunkt fur Hebezeuge,Umlenkrollen u.a. gegeben. Aber auch schweranzuschlagende Konstruktionen oder Sektionensind sicher und schnell mit diesen Klemmen zufassen.

Beam Clamp Type TThe simple and safe attachment point. Beamclamps with adjustable flange width can be attached quickly and easily without mountingtools or auxiliary material. The jaws arepressed on the beam by a clamping spindleand thus provide a suspension point for liftinggear, pulleys etc. Even heavy constructions orsections that are otherwise difficult to grabcan be quickly and easily moved with theseclamps.

Tragf. in kgLoad capacity

in kg

10001500200030006000

10000

TypType

TF 1TF 1,5TF 2TF 3TF 6TF 10

Greifbereich A in mmFlange width A in mm

64 - 19064 - 19064 - 19064 - 190200 - 300200 - 300

Gewicht in kg/Stk.Weight in kg/pce

889325349

B

160160160315365260

C

225-250240-265235-260295-340295-380330-370

D

556065657075

E

455050557580

Abmessungen in mmDimensions approx. in mm

Typ Bestell-Nr.Type Part No.

NG-72150010NG-72150015NG-72150020NG-72150030NG-72150060NG-72150100

Technische Änderungen vorbehalten. Subject to change without notice

Tragf. in kgLoad capacity

in kg

20003000400050006000

1000015000

TypType

T 2T 3T 4T 5T 6T 10T 15

Greifbereich A in mmFlange width A in mm

64 - 19064 - 190150 - 300150 - 300200 - 300200 - 300200 - 300

Gewicht in kg/Stk.Weight in kg/pce

561418213865

B

130140195195195195240

C

180-220180-220240-295270-310375-400500-520540-560

D

607079858585110

E

50556575758095

Abmessungen in mmDimensions approx. in mm

Typ Bestell-Nr.Type Part No.

NG-72160020NG-72160030NG-72160040NG-7216A050NG-72160060NG-7216A030NG-72160150

TrägerklemmenBeam Clamps

17INFO | NORDGREIF.COM

Page 18: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

W

V

H

I

A

B

Tragf. in kgLoad capacity

in kg

350035005000

A

650-500800-550650-500

B

1015-11651075-13001015-1165

H

750-430975-550750-430

I

260-315220-315260-315

V

160160160

W

808080

Abmessungen in mmDimensions in mm

Gewicht in kg/Stk.Weight in kg/pce.

120150130

Typ Bestell-Nr.Type Part No.

NG-DCIZ035650NG-DCIZ035800NG-DCIZ0056505

Drahtcoilinnenzangen, 3-armigin verdrehsteifer Ausführung über ein geführtes Zentralrohrmit Schrittschaltwerk und auswechselbaren Greifpallen

Wire Coil Internal Grab, 3-armTorsion-free construction with guided central tube. Equippedwith step mechanism and exchangeable grab jaws.

Drahtcoilinnenzangen, 2-armigin verdrehsteifer Ausführung über ein geführtes Zentralrohr mit Schrittschaltwerk und auswechselbarenGreifpallen

Wire Coil Internal Grab, 2-armTorsion-free construction with guided central tube. Equipped with step mechanism and exchangeable grabjaws.

Drahtcoilaußenzange

Wire Coil External Grab

Weitere Tragfähigkeiten und Abmessungen auf Anfrage möglich!

Other capacities and dimensions are available on request!

Bitte auf die vorhandenen Haspelhöhen achten !

Warning! Coil height must not be smaller than dimension I

Tragf. in kgLoad capacity

in kg

350035005000

A

650-500800-550630-550

B

1015-11651075-13001000-1200

H

750-430975-550

1190-1420

I

260-315220-315270-315

V

160160190

W

808090

Abmessungen in mmDimensions in mm

Gewicht in kg/Stk.Weight in kg/pce.

100120290

Typ Bestell-Nr.Type Part No.

NG-DCIZ002650NG-DCIZ002800NG-DCIZ205630

Tragf. in kgLoad capacity

in kg

3500

A

1250-850

B

1740-1360

H

1250-2200

I

350-430

V

150

W

75

Abmessungen in mmDimensions in mm

Gewicht in kg/Stk.Weight in kg/pce.

350

Typ Bestell-Nr.Type Part No.

NG-DCAZ301250

18 INFO | NORDGREIF.COM

DrahtcoilzangenWire Coil Tongs

Page 19: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Z51 RechteckprofilzangenDie Greifbacken der Rechteckprofilzangen sind mit einem weitgehend abriebfesten Schutzbelag versehen.Sie eignen sich besonders zum Transport von Gütern aus Stahl, Beton und Holz. Voraussetzung für ein ein-wandfreies Greifen ist jedoch, dass das Greifgut frei von Fett und Öl ist. Die Presskraft der Zangen ist so be-messen, dass der Reibfaktor zwischen Schutzbelag und Greifgut nicht kleiner als 0,75 µ betragen darf. Beiöligem Greifgut erbitten wir Ihre gesonderte Anfrage. Alle Rechteckprofilzangen sind mit einem Offenhalte-hebel ausgerüstet. Wir fertigen alle Zwischengrößen, auch mit höherer Tragfähigkeit und weiterem Greif-bereich. Bei öligem oder feuchtem Greifgut können die Greifbacken als Sonderleistung mit gehärtetenRosetten ausgerüstet werden.

Z51 Rectangular profile tongsThe grab jaws of the rectangular profile tongs are equipped with an extremely abrasion-proof protectivecover. They are particularly suitable for transporting goods made from steel, concrete and wood. However,the goods must be free from fat and oil to ensure trouble-free grabbing. The force of pressure of the tongsis calculated so that the friction factor between the protective cover and the foods may not be less than0.75. Please make a special request in the case of oily goods. All rectangular profile tongs are equippedwith an opening lever. We make all in-between sizes, also with higher load capacities and other grab ranges.The grab jaws can be equipped as a special design with hardened round anchor plates for oily or moistgoods.

Tragfähigkeit in kgLoad capacity in kg

250250

500500500

10001000100010001000

25002500250025002500

Typ Bestell-Nr.Type Part No.

NG-Z50002015NG-Z50002025

NG-Z50005020NG-Z50005035NG-Z50005050

NG-Z50010025NG-Z50010035NG-Z50010050NG-Z50010080NG-Z50010120

NG-Z50025025NG-Z50025035NG-Z50025050NG-Z50025080NG-Z50025120

ca. Maße in mm / Dimensions approx. (mm)A

40 - 15060 - 250

40 - 200100 - 350200 - 500

60 - 250100 - 350200 - 500300 - 800800 - 1200

60 - 250100 - 350200 - 500300 - 800800 - 1200

B

200250

300300400

300300400440500

330330400440600

F

400600

500700900

70080095014002400

700850100014002450

H

300 - 500400 - 800

350 - 700500 - 800600 - 900

450 - 700500 - 800600 - 900900 - 14001400 - 2400

500 - 800550 - 900650 - 1000900 - 14001400 - 2500

V

6565

757575

8080808080

9595959595

611

152535

283550130200

506072240360

Eig.-Gew. ca. kgWeight approx. (kg)

Tragfähigkeit in kgLoad capacity in kg

250250250250

500500500500

10001000100010001000

250025002500

Typ Bestell-Nr.Type Part No.

NG-Z51002006NG-Z51010012NG-Z51002026NG-Z51002050

NG-Z51005006NG-Z51005012NG-Z51005026NG-Z51005050

NG-Z51010012NG-Z51010026NG-Z51010050NG-Z51010075NG-Z51010100

NG-Z51025030NG-Z51025050NG-Z51025075

ca. Maße in mm / Dimensions approx. (mm)A

20 - 6050 - 125115 - 260250 - 500

20 - 6050 - 125115 - 260250 - 500

50 - 125150 - 260250 - 500480 - 750730 - 1000

150 - 300250 - 500480 - 750

B

370400560850

380400480850

50060085010001000

90011001100

C

75757575

75757575

100100100100100

120120120

H

300 - 360300 - 450380 - 650500 - 1000

300 - 360300 - 450380 - 670500 - 1000

360 - 500430 - 700500 - 1000500 - 1100600 - 1200

600 - 800700 - 1200700 - 1200

I

75757575

75757580

9090110110110

150150150

V

65656565

75757575

7580808080

959595

7101418

10121622

2328406070

7090110

Eig.-Gew. ca. kgWeight approx. (kg)

Z50 RundprofilzangenRundprofilzangen für den horizontalen Transport von Rundmaterialen aller Art, serienmäßig mit einem selbsttätigenOffenhaltehebel ausgerüstet. Gegen einen Mehrpreis sind alle Rundprofilzangen auch als Schalengreifer mit Schutz-belag für empfindliches Transportgut lieferbar. Alle Zangen sind als Sonderleistung mit Schrittschaltwerk erhältlich.Wir fertigen alle Zwischengrößen, auch mit höherer Traglast und veränderter Greifweite.

Z50 Round profile tongsRound profile tongs for horizontal transport of round materials of every kind, equipped as standard with anautomatic opening lever. At an extra charge all round profile tongs are available with a protective covering forsensitive transport goods. All tongs are available as a special design with step-by-step motion. We make all in-between sizes, even for higher loads and altered grab widths.

19INFO | NORDGREIF.COM

ZangenTongs

Page 20: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Z52 Zangen für Ballen und KistenZange für den Transport von gepressten Papier- oder Stoff-ballen, Kisten und Holzbohlen: Einfache robuste Scherenkon-struktion mit Offenhaltevorrichtung.

Z52 Tongs for bales and boxesTongs for transporting pressed paper or material bales, boxesand wooden planks. Simple robust pincer construction withopening lever.

Tragfähigkeit in kgLoad capacity in kg

250500500

10001000

Typ Bestell-Nr.Type Part No.

NG-Z52002050NG-Z52005050NG-Z52005065NG-Z52010100NG-Z52010120

ca. Maße in mm / Dimensions approx. (mm)A

250 - 500250 - 500300 - 650600 - 1000800 - 1200

B

808080110110

H

400 - 650400 - 650450 - 720700 - 950900 - 1050

I

150150180200220

V

6570708080

1215183845

Eig.-Gew. ca. kgWeight approx. (kg)

Z56 / Z57 LagerkastenzangenLagerkastenzangen zur Aufnahme von Lager-Stapelkästen. Typ Z 56 aussen und Typ Z 57 innen greifend. Der Greifvorgangerfolgt bei Typ Z 56 in der Kastensicke und bei Typ Z 57 unter-halb des Stulpwulstes. Damit sich beim Anstoßen oder Aufset-zen des Stapelkastens die Zange nicht öffnet, sind dieGreifarme über eine Zugfeder vorgespannt. Alle Zangen sindmit einem Offenhaltehebel versehen.

Z56 / Z57 Stock box tongsStock box tongs to lift warehouse stacking boxes. Type Z 56outward and type Z 57 inward grabbing. For type Z 56 grabbingoccurs on the box seam, for type Z 57 it is underneath the rein-forced seam. So that the tongs do not open when the stackingbox is jogged or hits the ground, the grab arms are tensionedwith a draw spring.

Tragfähigkeit in kgLoad capacity in kg

100100200200100100200200

Typ Bestell-Nr.Type Part No.

NG-Z56001030NG-Z56001045NG-Z56002030NG-Z56002045NG-Z57001030NG-Z57001045NG-Z57002030NG-Z57002045

ca. Maße inmm/ Dimensionsapprox. (mm)Greifweite in mmGreifweite in mm

300450300450300450300450

A

380530380530320470320470

H

320320320320320320320320

V

6565656565656565

66668888

Eig.-Gew. ca. kgWeight approx. (kg)

20 INFO | NORDGREIF.COM

ZangenTongs

Page 21: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Z60 Schienenzangen

Schienenzange für den Transport von Vignolschienen der TypeS und UIC sowie Kranschienen der Type A, besonders stabileAusführung mit Offenhaltevorrichtung, kombiniert mit Sperr-klinke, d.h. im Greifzustand kann sich die Zange trotz Zugent-lastung oder Aufsetzen der Schienen auf dem Boden nichtöffnen.

Z60 Rail tongs

Rail tongs for transporting Vignoles rails type S and UICand crane rails, very stable design with opening lever, com-bined with defensive latch, i.e. the rail tongs cannot open onthe ground in the grab state despite stress relief or hitting theground.

Hinweis/Note:Z60-10-08 für: S24 - S64, UCI50 - UCI60, A45 - A64Z60-20-08 für: S24 - S64, UCI50 - UCI60, A45 - A55

Tragfähigkeit in kgLoad capacity in kg

10002000

Typ Bestell-Nr.Type Part No.

NG-Z60010008NG-Z60020008

ca. Maße in mm / Dimensions approx. (mm)A

45 - 7545 - 75

B

420420

C

10 - 4010 - 31

H

440440

I

20 - 5520 - 55

V

9076

1618

Eig.-Gew. ca. kgWeight approx. (kg)

Z58 WendezangenDiese Wendezange eignet sich zum Aufrichten, Wenden oderDrehen von Transportgütern. Es ist eine Parallelogrammzange,deren Greifbacken sich parallel öffnen und schließen. Die Greif-backen sind drehbar gelagert und mit 90° -Einrastung versehenzur optimalen Anpassung an das Greifgut. Diese Wendezangeist mit einem Offenhaltehebel ausgerüstet.

Z58 Turning tongsThese turning tongs are suitable for straightening, turning or ro-tating transport goods. These are parallelogram tongs; the grabjaws open and close in parallel. The grab jaws can be rotated andwith 90° locking they enable perfect adjustment to the goods.These turning tongs are equipped with an opening lever.

Tragfähigkeit in kgLoad capacity in kg

125125250250500500

10001000

Typ Bestell-Nr.Type Part No.

NG-Z58001025NG-Z58001035NG-Z58002030NG-Z58002045NG-Z58005045NG-Z58005060NG-Z58010060NG-Z58010080

ca. Maße in mm / Dimensions approx. (mm)A

150 - 250250 - 350150 - 300300 - 450300 - 450450 - 600450 - 600650 - 800

B

600600700700720720800800

H

500 - 900550 - 950600 - 1050650 - 1100700 - 1150800 - 1250850 - 1300950 - 1500

I

250300300350350400430550

V

6060606070708585

353842457545100200

Eig.-Gew. ca. kgWeight approx. (kg)

21INFO | NORDGREIF.COM

ZangenTongs

Page 22: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Z61 KartonzangenParallelzange mit besonders großflächigen und schmalen Greif-backen mit Profilgummibelag, die große Druckverteilunggewährleisten. Besonders geeignet für sehr dicht nebeneinan-der stehende Pappkartons. Diese Zange verfügt über eine Of-fenhaltevorrichtung.

Z61 Cardboard tongsParallel tongs with extremely large and narrow grab jawswith rubber profile cover, which guarantees large pressuredistribution. Particularly suitable for cardboard boxes thatare very close together. These tongs have an opening lever.

Tragfähigkeit in kgLoad capacity in kg

125125125125125125125125

Typ Bestell-Nr.Type Part No.

NG-Z61001030NG-Z61001040NG-Z61001050NG-Z61001060NG-Z61001070NG-Z61001080NG-Z61001090NG-Z61001100

ca. Maße in mm / Dimensions approx. (mm)A

100 - 300200 - 400300 - 500400 - 600500 - 700600 - 800700 - 900800 - 1000

B

1515151515151515

F

700700700700700700700700

H

570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950

I

125125125125125125125125

V

6060606060606060

1517181920202223

Eig.-Gew. ca. kgWeight approx. (kg)

Z62 HolzstammzangenZange mit großer Greifweite und geringen Außenabmessungenfür den Transport von Holzstämmen. Ab einer Tragfähigkeit von2500 kg sind die Greifspitzen auswechselbar. Ausführung mitOffenhaltevorrichtung.

Z62 Log tongsTongs with large grab width and low outer dimensions fortransporting logs. The grab points can be changed from aload capacity of 2,500 kg. Designed with opening lever.

Tragfähigkeit in kgLoad capacity in kg

5001000250025005000

Typ Bestell-Nr.Type Part No.

NG-Z62005050NG-Z62010080NG-Z62025080NG-Z62025100NG-Z62050100

ca. Maße in mm / Dimensions approx. (mm)A

200 - 500300 - 800300 - 800400 - 1000500 - 1000

B

6501100115014001500

H

500 - 700750 - 900750 - 900900 - 1200900 - 1200

V

8585959595

12236085130

Eig.-Gew. ca. kgWeight approx. (kg)

22 INFO | NORDGREIF.COM

ZangenTongs

Page 23: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Z65 Profilzangen für SteinblöckeVerstellbare Profilzange mit sehr großem Spannbereich. Diejeweils gewünschte Greifweite und Schwerpunktlage sind überSteckbolzen schnell einstellbar. Geringe Bauhöhe. Ausführungmit Offenhaltehebel. Die Greifbacken sind mit einem Schutzbe-lag ausgestattet.

Z65 Profile tongs for stone blocksAdjustable profile tongs with very large span range. The de-sired grab widths and centres of gravity are quickly adjustedusing locking pins. Low construction height. Designed withopening lever. The grab jaws are equipped with a protectivecover.

Tragfähigkeit in kgLoad capacity in kg

250250500500

1000

Typ Bestell-Nr.Type Part No.

NG-Z65002065NG-Z65002080NG-Z65005100NG-Z65005080NG-Z65010100

ca. Maße in mm / Dimensions approx. (mm)A

200 - 650200 - 800200 - 800200 -1000200 -1000

B

9001050105012501300

H

600600600700700

I

150150175175200

V

6060707080

2528354065

Eig.-Gew. ca. kgWeight approx. (kg)

Tragfähigkeit in kgLoad capacity in kg

100010002500250050005000

Typ Bestell-Nr.Type Part No.

NG-Z67010015NG-Z67010030NG-Z67025030NG-Z67025015NG-Z67050015NG-Z67050030

ca. Maße in mm / Dimensions approx. (mm)A

80 - 15080 - 30080 - 150100 - 300100 - 150100 - 300

B

300 x 200500 x 200320 x 240410 x 250320 x 260410 x 260

152022353550

Eig.-Gew. ca. kgWeight approx. (kg)H

500750600800700900

I

404040405050

V

8585115115135135

Z67 TrägerzangenTrägerzange zum Transport von Doppelflanschprofilen. Beson-ders robuste Ausführung mit selbsttätig einrastendem Offen-haltehebel.

Z67 Beam TongsBeam Tong for transport double flange profiles. Very heavy design with a self-acting snap opening lever.

23INFO | NORDGREIF.COM

ZangenTongs

Page 24: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Z59 FasszangenFasszange für stehende Stahlfässer. Dies ist eine einfache robuste Zangezum Greifen unter den Fassrand. Ausführung mit Offenhaltehebel.

Z59 Drum tongsDrum tongs for vertical steel drums. This is a simple, robust tong forgrabbing under the drum edge. Designed with opening lever.

Z63 Fasszangen für liegende FässerZange für Rollen-Sickenfässer nach DIN 66 43 und 66 35, die über einegeringe Bauhöhe und selbsttätig einrastendem Offenhaltehebel verfügt.

Z63 Drum tongs for horizontal drumsTongs for roll channel drums in accordance with DIN 66 43 and 66 35,which have a low construction height and automatically locking openinglever.

Tragfähigkeit in kgLoad capacity in kg

250250500500

Typ Bestell-Nr.Type Part No.

NG-Z59002056NG-Z59002064NG-Z59005056NG-Z59005064

ca. Maße in mm / Dimensions approx. (mm)A

470 - 560560 - 640470 - 560560 - 640

B

700800700800

H

400 - 480430 - 530400 - 500430 - 530

I

50505050

V

60608080

10121215

Eig.-Gew. ca. kgWeight approx. kg

Tragfähigkeit in kgLoad capacity in kg

250500

Typ Bestell-Nr.Type Part No.

NG-Z63002091NG-Z63005091

ca. Maße in mm / Dimensions approx. (mm)A

760 - 910760 - 910

H

400 - 500400 - 500

I

3030

V

6070

1012

Eig.-Gew. ca. kgWeight approx. kg

24 INFO | NORDGREIF.COM

FasshandlingDrum Handling

Page 25: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Fassgeschirr (FHZ) zum Aufrichten, Transportieren und Kippen von Stahlfässern

Drum gear (FHZ) to straighten, transport and tip steel drums

*mit Öse 80 x 60 mm*with suspension eye 80 x 60 mm

Fasszwinge (Z66) zum vertikalen Heben

Drum collars (Z66) for vertical lifting

TypType

Z66*Z66*

Tragfähigkeit in kgLoad capacity in kg

500800

25INFO | NORDGREIF.COM

FasshandlingDrum Handling

Page 26: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

26 INFO | NORDGREIF.COM

C30 Coilhaken mit GegengewichtsausgleichStabile Stahlschweißkonstruktion aus hochwertigem Stahl für extremen Einsatz. Durch die konstruktiveAnordnung des Ausgleichsgewichtes verbleibt der Tragarm des Coilhakens sowohl im Leerzustand alsauch unter Last in der Waagerechten. Wir fertigen auch Zwischengrößen und Sonderausführungen.

C 30 Coil hooks with counterweight balanceStable welded steel construction of high quality steel for extreme use. The constructive alignment of thebalancing weight means the support plate remains horizontal both when empty and loaded.We also make in-between sizes and special designs.

Tragfähigkeit in tLoad capacity in t

0,50,50,50,5

1,01,01,01,0

2,52,52,52,5

5,05,05,05,0

7,57,57,57,5

10101010

15151515

20202020

252525

303030

Typ Bestell-Nr.Type Part No.

NG-C30005003NG-C30005005NG-C30005007NG-C30005010

NG-C30010003NG-C30010005NG-C30010007NG-C30010010

NG-C30025003NG-C30025005NG-C30025007NG-C30025010

NG-C30050007NG-C30050010NG-C30050012NG-C30050015

NG-C30075007NG-C30075010NG-C30075012NG-C30075015

NG-C30010007NG-C30010010NG-C30100012NG-C30100015

NG-C30150010NG-C30150012NG-C30150015NG-C30150020

NG-C30200010NG-C30200012NG-C30200015NG-C30200020

NG-C30250012NG-C30250015NG-C30250020

NG-C30300015NG-C30300017NG-C30300020

ca. Maße in mm / Dimensions approx. (mm)B

150 - 300250 - 500375 - 750500 - 1000

150 - 300250 - 500375 - 750500 - 1000

150 - 300250 - 500375 - 750500 - 1000

375 - 750500 - 1000625 - 1250750 - 1500

375 - 750500 - 1000625 - 1250750 - 1500

375 - 750500 - 1000625 - 1250750 - 1500

500 - 1000625 - 1250750 - 15001000 - 2000

500 - 1000625 - 1250750 - 15001000 - 2000

625 - 1250750 - 15001000 - 2000

750 - 1500875 - 17501000 - 2000

A

225375565750

225375565750

225375565750

5657509401125

5657509401125

5657509401125

75094011251500

75094011251500

94011251500

112513201500

C

60707580

7580100110

90110135140

160180200220

200230230250

230230270290

290290320350

300320330370

360360400

380400420

I

400400400400

450450450450

500500500500

550550550550

550550550550

600600650650

750750700700

850850800800

850850850

950950950

H

520520520520

600600600600

680680680680

780780780925

830830830830

910910960960

1120112010701070

1310131012601260

140014001400

155015501550

V x W

100 x 50100 x 50100 x 50100 x 50

120 x 55120 x 55120 x 55120 x 55

150 x 75150 x 75150 x 75150 x 75

190 x 90190 x 90190 x 90190 x 90

230 x 110230 x 110230 x 110230 x 110

250 x 120250 x 120250 x 120250 x 120

300 x 135300 x 135300 x 135300 x 135

380 x 180380 x 180380 X 180380 X 180

450 x 210450 x 210450 x 210

500 x 220 500 x 220 500 x 220

22304075

304570120

60110150170

230320350480

320380600670

270400570680

60078010001500

850100012501700

120015002000

190021002450

Eig.-Gew. ca. kgWeight approx. (kg)

C-HakenCoil Hooks

Page 27: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

27INFO | NORDGREIF.COM

C31 Coilhaken mit KettenaufhängungTyp C31: Durch die Kettenaufhängung kann das Eigengewicht des C-Hakens gering gehalten werden.

C31 Coil hooks with chain attachmentType C31: : the net weight of the C hook can be kept down thanks to the chain attachment.

Tragfähigkeit in tLoad capacity in t

33

5555

8888

10101010

15151515

20202020

Typ Bestell-Nr.Type Part No.

NG-C31025007NG-C31025010

NG-C31050007NG-C31050010NG-C31050012NG-C31050015

NG-C31075007NG-C31075010NG-C31075012NG-C31075015

NG-C31100007NG-C31100010NG-C31100012NG-C31100015

NG-C31150020NG-C31150010NG-C31150012NG-C31150015

NG-C31200010NG-C31200012NG-C31200015NG-C31200020

ca. Maße in mm / Dimensions approx. (mm)B

375 - 750500 - 1000

375 - 750500 - 1000625 - 1250750 - 1500

375 - 750500 - 1000625 - 1250750 - 1500

375 - 750500 - 1000625 - 1250750 - 1500

500 - 1000625 - 1250750 - 15001000 - 2000

500 - 1000625 - 1250750 - 15001000 - 2000

A

565750

5657509401125

5657509401125

5657509401125

75094011251500

75094011251500

C

135140

160180200220

200230230250

230230270290

290290320350

300320330370

I

500500

550550550550

550550550550

600600650650

750750700700

850850800800

H

15001600

1500160017001900

1600160019002150

1700180019002200

2000210022002500

2100220025002700

V x W

135 x 75135 x 75

180 x 100180 x 100180 x 100180 x 100

200 x 110200 x 110200 x 110200 x 110

200 x 110200 x 110200 x 110200 x 110

300 x 160300 x 160300 x 160300 x 160

340 x 180340 x 180340 x 180340 x 180

75110

150200280350

200300400490

270400500680

60078010001500

850100012501700

Eig.-Gew. ca. kgWeight approx. (kg)

C-HakenCoil Hooks

Page 28: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

28 INFO | NORDGREIF.COM

C32 Coilhaken mit FederschwerpunktausgleichTyp C32: Der automatische Federschwerpunktausgleich ermöglicht das Aufnehmen vonunterschiedlichen Coilgewichten bei gleichbleibender Schwerpunktlage.

C32 Coil hooks with spring centroidal balanceType C32: the automatic spring centroidal balance facilitates lifting of different coil weights without mov-ing the centre of gravity. the automatic spring centroidal balance facilitates lifting of different coil weightswithout moving the centre of gravity.

Tragfähigkeit in tLoad capacity in t

2,5

5,05,05,05,0

7,57,57,57,5

10101010

15151515

20202020

Typ Bestell-Nr.Type Part No.

NG-C32025010

NG-C32050007NG-C32050010NG-C32050012NG-C32050015

NG-C32075007NG-C32075010NG-C32075012NG-C32075015

NG-C32100007NG-C32100010NG-C32100012NG-C32100015

NG-C32150010NG-C32150012NG-C32150015NG-C32150020

NG-C32200010NG-C32200012NG-C32200015NG-C32200020

ca. Maße in mm / Dimensions approx. (mm)B

500 - 1000

375 - 750500 - 1000625 - 1250750 - 1500

375 - 750500 - 1000625 - 1250750 - 1500

375 - 750500 - 1000625 - 1250750 - 1500

500 - 1000625 - 1250750 - 15001000 - 2000

500 - 1000625 - 1250750 - 15001000 - 2000

A

750

5657509401125

5657509401125

5657509401125

75094011251500

75094011251500

C

140

160180200220

200230230250

230230270290

290290320350

300320330370

I

500

550550550550

550550550550

600600650650

750750700700

850850800800

H

1250

1250130013001400

1500155015501650

1500160016501700

1700175018001900

1900195020002100

V x W x X

175 x 75 x 35

175 x 75 x 40190 x 90 x 40190 x 90 x 40190 x 90 x 45

230 x 110 x 50230 x 110 x 50230 x 110 x 50230 x 110 x 55

250 x 120 x 55250 x 120 x 55250 x 120 x 60250 x 120 x 60

300 x 135 x 70300 x 135 x 70300 x 135 x 75300 x 135 x 75

380 x 180 x 80380 x 180 x 80380 x 180 x 85380 x 180 x 85

90

110125145160

135150200250

230250300380

400430550700

400500700950

Eig.-Gew. ca. kgWeight approx. (kg)

Typ C33 Coil-KipphakenGeeignet zum Kippen und Aufrichten von Stahlbandringen und Coils. Diese müssen gut bandagiert sein und auf Kanthölzern liegen. Sehr einfache Handhabung.

Type C 33 Tipping coil hooksSuitable for tipping and straightening steel band rings and coils. These must be well bound and be sitting on squared beams. Very simple handling.

Tragfähigkeit in tLoad capacity in t

0,51,01,02,52,53,04,05,0

Typ Bestell-Nr.Type Part No.

NG-C33005002NG-C33010022NG-C33010003NG-C33025002NG-C33025003NG-C33030003NG-C33040004NG-C33050005

ca. Maße in mm / Dimensions approx. (mm)A

100 - 200100 - 200200 - 300100 - 200200 - 300250 - 350250 - 400350 - 500

C

810101212152025

D

60707070708090100

I

400450500500500550600650

H

520600650680680730840900

V

100120120150150150190190

1012162025304050

Eig.-Gew. ca. kgWeight approx. (kg)

C-HakenCoil Hooks

Page 29: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

29INFO | NORDGREIF.COM

Tragfähigkeit in kgLoad capacity in kg

1000100010001000

1600160016001600

2500250025002500

5000500050005000

6300630063006300

10000100001000010000

16000160001600016000

Typ Bestell-Nr.Type Part No.

NG-T20010001NG-T2001002NG-T2001003NG-T2001005

NG-T2001601NG-T2001602NG-T2001603NG-T2001605

NG-T2002502NG-T2002503NG-T2002505

NG-T2002506.3

NG-T2005002NG-T2005003NG-T2005005NG-T2005008

NG-T2006303NG-T2006304NG-T2006305

NG-T2006306.3

NG-T2010003NG-T2010005NG-T2010008NG-T2010010

NG-T2016003NG-T2016005NG-T2016008NG-T2016010

ca. Maße in mm / Dimensions approx. (mm)L

1000200030005000

1000200030005000

2000300050006300

2000300050008000

3000400050006300

30005000800010000

30005000800010000

n x k

2 x 1254 x 1254 x 2508 x 250

2 x 1254 x 1254 x 2508 x 250

4 x 1254 x 2508 x 25010 x 250

4 x 1254 x 2508 x 2506 x 500

4 x 2506 x 2507 x 25010 x 250

4 x 2504 x 5006 x 5007 x 500

4 x 2508 x 2506 x 5007 x 500

H

380380400400

400400430450

510510580600

630680760660

700730800820

890820800850

92095010501150

V

120120120120

130130130130

150150150150

190190190190

210210210210

250250250250

300300300300

W

55555555

60606060

75757575

9090190190

95959595

120120120120

135135135135

203050120

254060200

6390210250

75135325800

180230420500

22058012001800

4006008002400

Eig.-Gew. ca. kgWeight approx. (kg)

T20 Traversen, starrTraverse mit schwenkbaren Sicherheitsösenhaken. DieseTraverse ist eine robuste Trägerkonstruktion. Einstufung undBerechnung erfolgen nach DIN EN 13155.

Die Stahlschweißkonstruktion wird ausschließlich vongeprüften Schweißern ausgeführt. Die nachstehende Tabellezeigt unsere Standardbaupalette.

T20 Lifting beams, rigidLifting beam with rotatable security eye hooks. This liftingbeam is a robust load construction. Grading and calculation areeffected in accordance with DIN EN 13155.

The welded steel construction is exclusively made using in-spected welds. The adjacent table shows our standard range.

TraversenLifting Beams

Page 30: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

T21 Traversen, verstellbar

Ausführung mit zwei Verstellbügeln und Sicherheitsösenhaken.Traversenaufhängung für Einfachhaken. Weitere Tragfähigkeitenund Größen auf Anfrage.

T21 Lifting beams, adjustable

Designed with two adjustable stays and security eye hooks.Lifting beam attachment for single hooks. Further load capaci-ties and sizes on request.

Tragfähigkeit in kgLoad capacity in kg

1000100010001000

1600160016001600

2500250025002500

5000500050005000

6300630063006300

10000100001000010000

16000160001600016000

Typ Bestell-Nr.Type Part No.

NG-T2101001NG-T2101002NG-T2101003NG-T2101005

NG-T2101601NG-T2101602NG-T2101603NG-T2101005

NG-T2101605NG-T2102502NG-T2102503NG-T2102505

NG-T2102506.3NG-T2105002NG-T2105003NG-T2105005

NG-T2105008NG-T2106303NG-T2106304

NG-T2106306.3

NG-T2110003NG-T2110005NG-T2110008NG-T2110010

NG-T2116003NG-T2116005NG-T2116008NG-T2116010

ca. Maße in mm / Dimensions approx. (mm)L

1000 - 5002000 - 10003000 - 10005000 - 1000

1000 - 5002000 - 10003000 - 10005000 - 1000

2000 - 10003000 - 10005000 - 10006300 - 1300

2000 - 10003000 - 10005000 - 10008000 - 2000

3000 - 10004000 - 10005000 - 15006300 - 1300

3000 - 10005000 - 10008000 - 200010000 - 3000

3000 - 10005000 - 10008000 - 200010000 - 3000

n x k

2 x 1254 x 1254 x 2508 x 250

2 x 1254 x 1254 x 2508 x 250

4 x 1254 x 2508 x 25010 x 250

4 x 1254 x 2508 x 2506 x 500

4 x 2506 x 2507 x 25010 x 250

4 x 2504 x 5006 x 5007 x 500

4 x 2508 x 2506 x 5007 x 500

H

400400420450

420420450500

610610680700

730780860750

800890900920

1000950920980

1080110012001300

V

120120120120

130130130130

150150150150

190190190190

210210210210

250250250250

300300300300

W

55555555

60606060

75757575

9090190190

95959595

120120120120

135135135135

253860150

305075230

75110230280

100160360850

220260470560

28065013501950

5007209502650

Eig.-Gew. ca. kgWeight approx. (kg)

30 INFO | NORDGREIF.COM

TraversenLifting Beams

Page 31: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

31INFO | NORDGREIF.COM

Tragf. in kgLoad capacity

(kg)

10002500250050005000500075007500

100001000015000

Typ Bestell-Nr.Type Part No.

NG-T2201021NG-T2202521NG-T2202532NG-T2205032NG-T2205042NG-T2205052NG-T2207552NG-T2207563NG-T2210042NG-T2210063NG-T2215063

ca. Maße in mm / Dimensions approx. (mm)Länge max

Length max.

2000 - 10002000 - 10003000 - 10003000 - 10004000 - 10005000 - 15005000 - 15006000 - 20004000 - 10006000 - 20006000 - 2000

Breite max.Width max.

1000 - 5001000 - 5002000 - 10002000 - 10002000 - 10002500 - 10002500 - 10003000 - 10002500 - 10003000 - 10003000 - 1000

H

60064071086088090011001150120012501450

9014023034045060068098077511501400

Eig.-Gew.ca. kgWeight

appr. (kg)

T23 Traversen für GitterboxenStarre Traverse mit vier Unterfasshaken. Ausführung mit einem beweglichen und einem starrenHakenpaar.

T23 Lifting beams for skeleton containersRigid lifting beams with four drum hooks. Designed with a mobile and a rigid hook pair.

Tragf. in kgLoad capacity

(kg)

100015003000

Typ Bestell-Nr.Type Part No.

NG-T23010108NG-T23015108NG-T23030108

Eig.-Gew.ca. kgWeight

appr. (kg)

404565

ca. Maße in mm / Dimensions approx. (mm)

B

600600600

H

360380450

I

150160160

L

120012001200

V

120120150

T25 GabelstaplerschuheEinfachaufsteckschuh mit Wirbelhaken für Gabelstapler. Maße A undB sind variierbar.

T25 Forklift shoesSingle attachment shoe with rotating hook for forklifts. DimensionsA and B are variable.

Tragfähigkeit in kgLoad capacity in kg

1000150020003000

Typ Bestell-Nr.Type Part No.

NG-T25010NG-T25015NG-T25020NG-T25030

ca. Maße in mm / Dimensions approx. (mm)A

120140160180

B

50606080

H

160180200220

56810

Eig.-Gew. ca. kgWeight approx. (kg)

T22 Auslegertraversen verstellbar Auslegertraversen verstellbar in Länge und Breite, mit beweglichemT22 Lifting beams adjustable Sicherheitshaken Typ T 22:

Lifting beams adjustable in length and width. Lifting beam with safety hook type T 22:

T24 GabelstaplertraversenDoppelaufstecktraverse mit Wirbelhaken für Gabelstapler. Robuste Ausführung mit geringerBauhöhe. Maße A, B und C können auch Ihren Wünschen entsprechend gefertigt werden.

T24 Forklift lifting beamsDouble attachment lifting beam with rotating hookfor forklifts. Rigid design with low clear-ance. Dimensions A, B and C can also be manufactured to your specifications.

Tragfähigkeit in kgLoad capacity in kg

1000150020003000

Typ Bestell-Nr.Type Part No.

NG-T24010NG-T24015NG-T24020NG-T24030

ca. Maße in mm / Dimensions approx. (mm)A

500500600600

B

120140160200

C

606080100

H

140160200200

10152030

Eig.-Gew. ca. kgWeight approx. (kg)

TraversenLifting Beams

Page 32: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

TA Spreize starr mit SchaukelstückSpreize nicht verstellbar, mit fixer Greifweite. Die Ketten laufen durch dieSchaukelstücke an den Enden der Spreize. Diese bewirken eine Um-lenkung der Kraft. Die Spreize dient als nur Abstandshalter. Die Ketten gehören nicht zum Lieferumfang. Im Bedarfsfall das Kettenge-hänge gesondert anfragen.

TA Spreader Beams, fixed, with rocker Spreader beam fixed. The chains run-through the spreader beam and theforce will be causing a deflection with the rocker. The spreader beam isonly a distance piece.Chains not part of scope. In case of need, please ask for offer.

Tragf. in kg 90° Winkel

Load capacity (kg)90° Head angle

1400280045007100

11200

Kettenstärked in mm

Chain gauged(mm)

68101316

Maße in mmDimensions in mm

A

10001000 - 15001000 - 15001000 - 15001250 - 2500

Typ Bestell-Nr.Type Part No.

NG-TA06NG-TA08100NG-TA10100NG-TA13100NG-TA16125

TAV Spreize verstellbar mit SchaukelstückSpreize mit Verstellraster, für variable Greifweiten. Die Ketten laufen durchdie Schaukelstücke, die eine Umlenkung der Kraft bewirken. Die Spreizedient als nur Abstandshalter. Die Ketten gehören nicht zum Lieferumfang. Im Bedarfsfall das Kettenge-hänge gesondert anfragen.

TAV Spreader Beams, adjustable, with rockerSpreader beam, adjustable, for variable gripping width. The chains run-through the spreader beam and the force will be causing a deflection withthe rocker. The spreader beam is only a distance piece. Chains not part of scope. In case of need, please ask for offer.

Tragf. in kg 90° Winkel

Load capacity (kg)90° Head angle

1400280045007100

11200

Kettenstärked in mm

Chain gauged(mm)

68101316

Maße in mmDimensions in mm

A min - A max

1000 - 15001200 - 20001200 - 20001200 - 20001900 - 2500

Typ Bestell-Nr.Type Part No.

NG-TAV06NG-TAV08NG-TAV10NG-TAV13NG-TAV16

TB Spreize starr mit PendelstückSpreize nicht verstellbar, mit fixer Greifweite. Das Kettengehänge ist an derSpreize befestigt. Die Pendelstücke ermöglichen eine lösbare Anbindungdes Greifgutes an die Spreize. Die Ketten gehören nicht zum Lieferumfang.Im Bedarfsfall das Kettengehänge gesondert anfragen.

TB Spreader Beams, fixed, with pendular suspension lugsSpreader beam fixed length, with loadside pendular suspension lugs atboth ends. The crane side chain suspension must be connected to thespreader beam. Various slings, ropes or chains can be connected to theloadside pendular suspension lugs.All Chains not part of scope. In case of need, please ask for offer.

TBV Spreize verstellbar mit PendelstückSpreize mit Verstellraster, für variable Greifweiten. Das Kettengehänge istan der Spreize befestigt. Die Pendelstücke ermöglichen eine lösbare An-bindung des Greifgutes an die Spreize. Es können Rundschlingen, Seileoder Ketten angebaut werden. Die Spreize dient als nur Abstandshalter.

TBV Spreader Beams, adjustable with pendular suspen-sion lugsSpreader beam, adjustable, for variable gripping width, with loadsidependular suspension lugs at both ends. The crane side chain suspensionmust be connected to the spreader beam. The spreader beam is only adistance piece. Various slings, ropes or chains can be connected to theloadside pendular suspension lugs.Chains not part of scope. In case of need, please ask for offer.

Tragf. in kg 90° Winkel

Load capacity (kg)90° Head angle

1400280045007100

11200

Kettenstärked in mm

Chain gauged(mm)

68101316

Maße in mmDimensions in mm

A

10001000 - 15001000 - 15001000 - 15001250 - 2500

Typ Bestell-Nr.Type Part No.

NG-TB06100NG-TB08100NG-TB10100NG-TB13100NG-TB16125

Tragf. in kg 90° Winkel

Load capacity (kg)90° Head angle

1400280045007100

11200

Kettenstärked in mm

Chain gauged(mm)

68101316

Maße in mmDimensions in mm

A min - A max

1000 - 15001200 - 20001200 - 20001200 - 20001900 - 2500

Typ Bestell-Nr.Type Part No.

NG-TBV06NG-TBV08

NG-TBCV10NG-TBV13NG-TBV16

32 INFO | NORDGREIF.COM

Spreizen / SpreiztraversenSpreader Bars

Page 33: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

33

Benötigtes Lastaufnahmemittel:

Bezeichnung der Last (Werkstoffangabe):

Gewicht (kg) min. max.

Länge (mm) min. max.

Breite (mm) min. max.

Höhe (mm) min. max.

Außendurchmesser (mm) min. max.

Innendurchmesser (mm) min. max.

Angaben zur Last

Angaben zum Hebezeug

Angaben zum Lastaufnahmemittel

Lastposition ❐ waagerecht Lastbewegung ❐ Heben waagerecht ❐ senkrecht ❐ um ° drehen

Lastoberfläche ❐ trocken - druckempfindlich ❐ trocken - druckunempfindlich ❐ feucht - druckempfindlich ❐ feucht - druckunempfindlich

Lastposition ❐ waagerecht Lastbewegung ❐ Heben waagerecht ❐ senkrecht ❐ um ° drehen

Lastoberfläche ❐ trocken - druckempfindlich ❐ trocken - druckunempfindlich ❐ feucht - druckempfindlich ❐ feucht - druckunempfindlich

Möglichkeit der ❐ durch Klemmen ❐ durch UmgreifenLastaufnahme

Kranhaken ❐ Einfachhaken Nr. ❐ Doppelhaken Nr. DIN 15041 DIN 15042

❐ Hallenkran Tragkraft t

❐ Portalkran Hubhöhe m

Betriebsart ❐ mit Sperrhebel ❐ mit Schrittschaltwerk

Abmessungen für Breite F max. mm Innere Höhe I max. mmBild 1 und Bild 2 Bauhöhe H max. mm Greifbacke C x C mm

Breite F max. mm

Aufhängekopf Höhe V max. mm Breite B max. mm

Art desvorhandenen Kranes

Art desvorhandenen Kranes

Empfänger:

Nordgreif GmbH

Tel: +49 (0) 40 / 73 60 74-0Fax: +49 (0) 40 / 73 60 74-22Email: [email protected]

Absender:

Ansprechperson:Tel.: Fax:Email:

33INFO | NORDGREIF.COM

FAX ANFRAGEFORMULAR ZANGEN

Page 34: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Haupttraverse

Quertraverse

Traversen Aufhängungen Traversen AbhängungenTraversen Aufhängungen Traversen Abhängungen

Typ 1 ❏

Typ 4❏ Typ 5❏ Typ 6❏

Typ 2 ❏ Typ 3 ❏ Typ 1 ❏

Typ 4❏ Typ 5❏ Typ 6❏

Typ 2 ❏ Typ 3 ❏

Tragfähigkeit kg

Raster Anz. mm(RL Anz. x mm)L min mm

L max mm

Raster Anz. mm(RB Anz. x mm)B min mm

B max mm

Aufhängekopf

Sonstige Angaben

SonstigeAnforderungen

Höhe H max. mm Breite B max. mm Kranhaken-Nr.:

H1 = max. Höhe Haupttraverse mm

H2 = Gesamthöhe mm

Tragfähigkeit

RL Lmin.

Lmax.

H1

H2

RBBmin.

Bmax.B

H

Empfänger:

Nordgreif GmbH

Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]

Absender:

Ansprechperson:Tel.: Fax:Email:

FAX ANFRAGEFORMULAR TRAVERSEN

34 INFO | NORDGREIF.COM

Page 35: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

FAX ANFRAGEFORMULAR C-HAKEN

Typ 1 ❏

C-Haken Varianten

C-HakenHauptabmessungen

Tragfähigkeit

RM = Rastermaß

A = Auflagefläche

AB = Auflagebreite

B = Coillänge

I = Coilinnenhöhe

Aufhängekopf

H1 = max. Höhedes C-Haken

Z = Zinkenbreite

Einsatzgebiet

SonstigeAnforderungen

mm C = Zinkenhöhe mm

mm

kg

Anzahl

mm

mm

mm

mm

mm Abstand

Typ 4 ❏ Typ 5 ❏ Typ 6 ❏

Typ 2 ❏ Typ 3 ❏

C

B

H

H1

AB

A

I

Empfänger:

Nordgreif GmbH

Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]

Absender:

Ansprechperson:Tel.: Fax:Email:

Höhe H max. mm Breite B max. mm Kranhaken-Nr.:

35INFO | NORDGREIF.COM

Page 36: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

36

Required load suspension equipment:

Description of the load (indicate material):

Weight (kg) min. max.

Length (mm) min. max.

Width (mm) min. max.

Height (mm) min. max.

Outside diameter (mm) min. max.

Inside diameter (mm) min. max.

Information on Load

Information on Lifting Gear

Information on Load Suspension Devices

Load position ❐ horizontal load movement ❐ lifting horizontal ❐ vertical ❐ ° rotation

Load surface ❐ dry – pressure sensitive ❐ dry – not pressure sensitive ❐ wet – pressure sensitive ❐ wet – not pressure sensitive

Option of ❐ by clamping ❐ by wrap-aroundload pick-up

Crane hook ❐ simple hook no. ❐ double hook no. DIN 15041 DIN 15042

❐ overhead crane load capacity t

❐ portal crane lifting height m

Operating mode ❐ with ratchet lever ❐ with automatic step mechanism

Dimensions for width F max. mm internal height I max. mmfig. 1 and fig. 2 structural height H max. mm jaw C x C mm

Width F max. mm

Suspension eye height V max. mm width B max. mm

Typeof existingcrane

To:

Nordgreif GmbH

Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]

Sender:

Contact person:Tel.: Fax:e-mail:

FAX ENQUIRY FORM TONGS

36 INFO | NORDGREIF.COM

Page 37: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

FAX ENQUIRY FORM LIFTING BEAMS

Main beam

Cross beam

Traversen Aufhängungen Traversen AbhängungenLifting eye types Hook types

Type 1 ❏

Type 4❏ Type 5❏ Type 6❏

Type 2 ❏ Type 3 ❏ Type 1 ❏

Type 4❏ Type 5❏ Type 6❏

Type 2 ❏ Type 3 ❏

Load capacity kg

Grid n° mm(RL n° x mm)L min mm

L max mm

Grid n° mm(RB n° x mm)B min mm

B max mm

Lifting eye

Other Information

Other Requirements

Height H max. mm Width B max. mm Hook-no:

H1 = max. height main lifting beam mm

H2 = overall height mm

To:

Nordgreif GmbH

Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]

Sender:

Contact person:Tel.: Fax:e-mail:

Main Beam

Cross Beam

37INFO | NORDGREIF.COM

Tragfähigkeit

RL Lmin.

Lmax.

H1

H2

RBBmin.

Bmax.B

H

Load capacity

Page 38: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Type 1 ❏

C-hook types

C-hooks dimensionsMain dimensions

Load capacity

RM = grid dimensions

A = supporting surface

AB = supporting width

B = coil length

I = coil inside height

Lifting eye

H1 = max. heightof the C-hook

Z = prong width

Area of Application

Other requirements

mm C = prong height mm

mm

kg

number

mm

mm

mm

mm

mm spacing

Type 4 ❏ Type 5 ❏ Type 6 ❏

Type 2 ❏ Type 3 ❏

C

B

H

H1

AB

A

I

To:

Nordgreif GmbH

Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]

Sender:

Contact person:Tel.: Fax:e-mail:

Height H max. mm Width B max. mm C-hook-no.:

FAX ENQUIRY FORM COIL HOOKS

38 INFO | NORDGREIF.COM

Page 39: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

39INFO | NORDGREIF.COM

Für Sonderlastaufnahmemittel:

For special load handling devices:

NORDGREIFTechnik für die Praxis,Sicherheit für den Mensch.

Sollten Sie in diesem Katalog NICHT das passende Standardlastaufnahmemittel gefunden haben,schauen Sie bitte auf unsere Homepage, bestellen Sie unseren Sonderlastaufnahmemittel-Katalogoder nehmen Sie persönlich Kontakt auf.

If you do not find the appropriate standard LOAD HANDLING DEVICE please visit our website, orcontact us directly.

Infoline: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22E-Mail: [email protected]: www.nordgreif.com

Page 40: STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.

Mechanische Zange zum Greifen von Pipeline-Rohren unter Wasser.

Mechnical tong for submarine pipeline tubes.

Nordgreif GmbH

Achter de Weiden 12D-22869 Schenefeld / HamburgGermany

Telefon: +49 (0) 40 / 73 60 74 0Telefax: +49 (0) 40 / 73 60 74 22

Email: [email protected]: www.nordgreif.com

© Copyright by Nordgreif GmbH 2013

Es gelten unsere aktuellen Verkaufs-, Lieferungs- und Zahlungsbedingungen.

Bei Bedarf bitte anfordern.

Änderungen vorbehalten.Nachdruck dieses Prospektes, auch auszugsweise, ist untersagt.

© Copyright by Nordgreif GmbH 2013. Our current Terms and Conditions ofSale, Delivery and Payment apply.

Please request as needed.

All rights reserved. It is forbiddento reprint this brochure includingextracts.