Specialising in Cupro Nickel, Copper & Copper Alloys. www.smicopper.com Specialising in Cupro Nickel, Copper & Copper Alloys
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
Specialising in Cupro Nickel, Copper & Copper Alloys
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com02
SuNflex MetAl INduStrIeSSunflex Metal Industries is a leading exporter of
Cupro Nickel, Copper, Copper Alloys.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
03
World’s largest manufacturer and supplier for industrial metals and products.
Sunflex Metal Industries is a leading metal service centre and distributor specializing in Copper Alloy, Stainless Steel, Aluminum and Brass. Sunflex Metal also specializes in precision cutting all metal products such as Round Bars, Rods, Pipes, Tubing, Coil, Sheet & Plate, Pipe Flanges & Fittings for your applications.
Our longstanding relationships with many of our vendors enable us to purchase inventory from the best sources available at the most leading prices. With an extensive inventory and wide range of processing capabilities, we are a most popular supplier for all of your steel needs. Let our experienced sales force help you find the material to suit your steel requirements. We aim to save our customers time and money by providing the best product and services.
Greeting
Certificates
Thank you
“Our corporate philosophy of “source, supply, service” which is wholeheartedly believed and practices not only by the management but also the other
staff members.”
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
04
General InformationtHe MAterIAl
tHe pIpeS, tubeS, rouNd bArS, rodS, Nut boltS, buttweld & forged fIttINgS, wIre & wIre MeSH for Copper ANd Copper-NICKel AlloYS.
The Introduction of Cuni 90/10 and Cuni 70/30 Alloy :
The Attractive corrosion and biofouling - Resistance of copper-nickel alloys in seawater and related environments have Led to their substantial use in marine service for many years. The two main, wrought copper-nickel Alloys chosen for seawater service contain 10% or 30% Nickel, respectively. Development work began in the 1930s in response to A requirement by the british navy for in improved condenser material. Since the 1950s, the 90-10 Alloy has become accepted for condenser service as well as for seawater pipe work in merchant and naval service. In naval vessels, the 90-10 copper-nickel is preferred for surface ships; Whereas, the 70-30 alloy is used for sub-marines because its greater strength makes it more acceptable for the higher pressures encountered. These alloys are also used for power station condensers and offshore seawater pipe work on oil/gas platforms:
Large quantities are selected for the desalination industry and they are additionally used for cladding and sheath-ing of marine structures and hulls.
pipes & tubes
flanges
Sheets & plates
Threaded forged fittings
bars & rods
buttweld pipe fittings
Nuts & bolts
wire & wire Mesh
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
05
General InformationtHe MAterIAlCharacteristics of Copper Nickel Alloy:Good Resistance to stress corrosion & cavitaion erosion.Excelent resistance to sea waterGood thermal stability (up to approx. 300 )Good cold - workabilityGood Welding and solder properties
Chemical Composition and Comparision table for Cu-Ni Alloys
Comparison table of Standard Specifications for Cu-Ni 90/10 pipe
Comparison table of Standard Specifications for Cu-Ni 70/30 pipe
dIN 176642.0872
dIN 860192.1972
bS 2871CN 102
eeMuA144-1987
uNS C 7060x
MIl-t-16420KAStM b 466
C 70600
JIS H 3300 C 7060t
Cu+Ni+feCu% rem. rem. rem. rem. rem. rem.Ni% 9.0 - 11.0 9.0 - 11.0 10.0 - 11.0 10.0 - 11.0 9.0 - 11.0 9.0 - 11.0Fe% 1.0 - 2.0 1.5 - 1.8 1.0 - 2.0 1.5 - 2.0 1.0 - 1.8 1.0 - 1.8
Mn% 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 max. 1.00 0.2 - 1.0C % max. 0.05 max. 0.05 max. 0.05 max. 0.05 max. 0.05 -Pb% max. 0.03 max. 0.01 max. 0.01 max. 0.01 max. 0.02 max. 0.05S % max. 0.02 max. 0.005 max. 0.05 max. 0.02 max. 0.02 -P% max. 0.02 max. 0.02 - max. 0.02 max. 0.02 -
Zn% max. 0.50 max. 0.05 - max. 0.20 max. 0.50 max. 0.50
Other imp max. 0.30 max. 0.20 max. 0.30 max. 0.30 - Cu+Ni+Fe+Mn : min 99.5%
dIN 17664 2.0882 bS 2871 CN 107 MIl-t-16420K AStM b 466C 71500 JIS H 3300
Cu% rem. rem. rem. rem.Ni% 30.0 - 32.0 30.0 - 32.0 29.0 - 33.0 29.0 - 33.0Fe% 0.4 - 1.0 0.4 - 1.0 0.4 - 1.0 0.4 - 1.0
Mn% 0.5 - 1.5 0.5 - 1.5 max. 1.00 0.2 - 1.0C % max. 0.05 max. 0.06 max. 0.05 -Pb% max. 0.03 max. 0.01 max. 0.02 max. 0.05S % max. 0.02 max. 0.08 max. 0.02 -P% max. 0.02 - max. 0.02 -
Zn% max. 0.50 - max. 0.50 max. 0.50Other imp. max. 0.30 - - Cu+Ni+Fe+Mn : min 99.5%
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
06
tHe fAbrICAtIoN teCHNIQueS for Copper NICKel AlloY
HeatingIn the presence of contaminants such as sulphur, phosphorus, lead and other low-melting-point meals, copper alloys may become embrittled when heated. It is therefore important that the workpiece is clean and free from contaminants before heating.Sources of deleterious substances are marking and temperature indicating paints and crayons, lubricating grease and fluids, fuels etc. Fuels must be low in sulphur; e. g. natural gas and liquid petroleum gas should contain less than 0.1% and town sgas 0.25% maximum of sulphur. Fuel oil should contain a Maximum of 0.5% sulphur. (all percentages are by weight.)
Hot working
Hot working may be carried out in the following ranges : 1. Cunifer 10 950 - 840 (1750 - 1550 ) 2. Cunifer 30 1000 - 840 (1830 - 1550 )See also the later section on got bending.
The material may be charged into the furnace at maximum working temperature and allowed to soak until the workpiece is uniformly heated, approximately 60 minutes/100mm(4in) of section. The material should then be withdrawn immediately and worked within the specified range. Prolonged soaking should not be allowed. If during working, temperature of the metal falls below the specified minimum it must be reheated. Air cooling is satisfactory.
Cold bendingPipes are normally supplied in the annealed condition. If possible, the tube should be bent using bending machines when the radius of curvature is equal to or greater than three times the diameter. Tubes up to 80mm(3in) diameter may be cold bent with radius of curvature equal to twice the diameter. For bend radii less than this it is advisable to use fittings.
Where cold bending is done without the use of a tube bending machine the tube must be filled. The most usual filler are dry silica sand free from all carbonaceous matter and sodium thiosulfate (hypo). The tube must be tightly packed. After bending it is important that the filler is completely removed and the tube thoroughly cleaned.be neutral or very slightly reducing. Electric heating is recommended.
AnnealingMetallurgical annealing is not necessary after hot working. For Cunifer 10 and Cunifer 30 a full anneal is achieved by heating to 750 - 840 (1380 - 1550 ) but a considerable degree of softening can be obtained b heating at 600 - 650 (1100 - 1200 ) Stress relief can be achieved by heating within the range 350 - 450 (660 - 840 )..
For Cunifer 10 and Cunifer 30 the furnace atmosphere should be neutral or very slightly reducing. Electric heating is recommended.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
07
JoiningMetallurgically, Cunifer 10 and Cunifer 30 are solid-solution alloys with no deleterious second phases and experience no phase transformation during heating and cooling. They are usually welded or brazed in the annealed condition. It is also essential that the surfaces adjacent to the joint must be clean and free from oxide. To remove oxide and other contaminants, an area approximately 25mm(1in) wide on each side of the joint should be prepared by scratch-brushing with a clean, stainless steel brush used only for copper alloy.
This is followed by degreasing with a non-toxic non-flammable solvent. No pre-heat is required, but the material must be free from moisture. In cold or humid conditions, it should be warmed to about 25 (80 ). Interpass temperature should be controlled and should not exceed 10 (250 ). Modern welding techniques such as TIG and MIG may be used in addition to brazing for the joining.
welding ConsumablesIt is usual practice to weld Cunifer 10 with 70/30 copper-nickel bare filler metal. Flux-coated electrodes can be used for wall thicknesses of above 6mm. Welding consumables of almost matching composition to Cunifer 10 are, however, available.
Under certain circumstances the use of a nominally 70/30 nickelcopper electrode or filler metal, particularly for dissimilar metal joints, is suggested. Cunifer 30 can be welded with 70/30 copper-nickel filler metal.
Table 1 gives details of material specification.
Country 90/10 copper-nickel-iron 70/ 30 copper-nickel-iron
Flux-coated electrode Filler wire Flux-coated electrode Filler wire
GermanyDIN1733S-CuNi10FeMat No. 2.0873
DIN1733S-CuNi10FeMat No. 2.0873
DIN1733S-CuNi30FeMat No. 2.0873
DIN1733S-CuNi30FeMat No. 2.0873
British
BS2901:Part3Type C1690/10Cu-Ni-Fe-Ti
BS2901:Part3 Type C18 30/70Cu-Ni-Fe-Ti
United States of America
AWS A 5.6Class ECuNi
AWS A 5.7Class RCuNi
Table 1 : Related specifications for flux-coated electrodes and bare filler wires for welding of Cunifer 10 and Cunifer 30.
welding Consumable Specifications
picklingAfter hot and/or cold bending, cleaning and stress relieving, all traces of scale should be removed by pickling or acid cleaning. A suitable pickling solution is 5 to 10% of sulphuric acid plus 25 - 50 g/l(4 8 oz/gal.) of sodium dichromate. After picking, the tube should be thoroughly rinsed in hot, fresh water.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
weldingWhichever process is used, tack welds should be kept to a minimum and as short as possible. Tack welds should be deposited in the opposite direction to the subsequent weld run and each tack must be thoroughly cleaned before welding commences. Manual metal arc welding is applicable to Cunifer 10 and Cunifer 30 with thicknesses greater than 6mm(0.2in) The majority of flux-coated electrodes are recommended for operation with direction current, electrode positive. Suggested joint preparations are shown in figure1.
JoINt prepArAtIoN Thickness
1.5mm
3.0mm
3.0mm
Figure 1 : Suggested joint preparations for the welding of Cunifer 10 and Cunifer 30. Manual metal arc welding is preferably carried out in the downhand position. Positional welding can be performed successfully by skilled operators. Positional welding is facilitated by making the root run by the TIG process. Direction of travel is then reversed and welding continued with a weave motion TIG is preferred for metal thicknesses up to and including 6mm(0.2in). TIG welding may also be used for the root runs in thicker material, the fill-up runs being deposited by the manual metal arc process.
TIG is preferred for metal thicknesses up to and including 6mm(0.2in). TIG welding may also be used for the root runs in thicker material, the fill-up runs being deposited by the manual metal arc process. For Cunifer 10 and Cunifer 30, direct current is required. For all these materials shielding gas is 99.95% pure argon which is also used as the back purging gas for Cunifer 10 and Cunifer 30. Satisfactory filler wires are given in table 1 and suggested edge preparations are shown in figure1.
Table 2 gives typical operating data for TIG welding.
Metal thickness Diameter of tungsten electrode Diameter of filler wire Welding current
mm in mm mm mm1.5 0.06 1.6 1.5 or 2.0 60 - 802 0.08 1.6 2.0 80 - 1004 0.16 2.4 or 3.2 2.0 to 4.0 170 - 1906 0.24 3.2 3.2 to 5.0 240 - 2808 0.32 3.2 3.2 to 5.0 240 - 280
10 0.40 3.2 3.2 to 5.0 240 - 280
Table 2 : Typical operating data for the TIG welding of Cunifer 10 and Cunifer 30
08
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
09
CoNteNt
PIPESPAGE - 10
BAR & PLATESPAGE - 13
BuTTWELd PIPE FITTInGSPAGE - 16
FLAnGESPAGE - 69
MACHInEd FITTInGSPAGE - 94
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
10
pipe
s
pipes
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
11
uS StANdArdSdIMeNSIoN :- Cu-Ni 90/10 Cu-Ni 70/30 SEAMLESS and SEAM Pipe according to ANSI/ASTM B36.19M
outside diameter of pipeØ d
Schedule 5S Schedule 10S
Minimum wall Thickness Minimum wall ThicknessNominal
inch dActual
inchActual
mmActual
inchActual
mmActual
inchActual
mmSeAMleSS
1/8 0.405 10.29 - - 0.049 1.241/4 0.540 13.72 - - 0.065 1.653/8 0.675 17.15 - - 0.065 1.651/2 0.840 21.34 0.065 1.65 0.083 2.113/4 1.050 26.67 0.065 1.65 0.083 2.111 1.315 33.40 0.065 1.65 0.109 2.77
1 1/4 1.660 42.16 0.065 1.65 0.109 2.771 1/2 1.900 48.27 0.065 1.65 0.109 2.77
2 2.375 60.32 0.065 1.65 0.109 2.772 1/2 2.875 73.03 0.083 2.11 0.120 3.05
3 3.500 88.90 0.083 2.11 0.120 3.053 1/2 4.000 101.60 0.083 2.11 0.120 3.05
4 4.500 114.30 0.083 2.11 0.120 3.055 5.536 141.30 0.109 2.77 0.134 3.406 6.625 168.30 0.109 2.77 0.134 3.408 8.625 219.10 0.109 2.77 0.148 3.76
10 10.750 273.05 0.134 3.40 0.165 4.1912 12.750 323.90 0.156 3.96 0.180 4.57
outside diameter of pipeØ d
Schedule 40S Schedule 80S
Minimum wall Thickness Minimum wall ThicknessNominal
inch dActual
inchActual
mmActual
inchActual
mmActual
inchActual
mmSeAMleSS
1/8 0.405 10.29 0.068 1.73 0.095 2.411/4 0.540 13.72 0.088 2.24 0.119 3.023/8 0.675 17.15 0.091 2.31 0.126 3.201/2 0.840 21.34 0.109 2.77 0.147 3.733/4 1.050 26.67 0.113 2.87 0.154 3.911 1.315 33.40 0.133 3.38 0.179 4.55
1 1/4 1.660 42.16 0.140 3.56 0.191 4.851 1/2 1.900 48.27 0.145 3.68 0.200 5.08
2 2.375 60.32 0.154 3.91 0.218 5.542 1/2 2.875 73.03 0.203 5.16 0.276 7.01
3 3.500 88.90 0.216 5.49 0.300 7.623 1/2 4.000 101.60 0.226 5.74 0.318 8.08
4 4.500 114.30 0.237 6.02 0.337 8.565 5.563 141.30 0.258 6.55 0.375 9.536 6.625 168.30 0.280 7.11 0.432 10.978 8.625 219.10 0.322 8.18 0.500 12.70
10 10.750 273.06 0.365 9.27 0.500 12.7012 12.750 323.90 0.375 9.53 0.500 12.70
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
12
outside diameter of pipeØ d
10 bar 14 bar 16 bar 20 barMinimum wall
ThicknessMinimum wall
ThicknessMinimum wall
ThicknessMinimum wall
ThicknessNominal Actual
mmActual
mmActual
mmActual
mmActual
mminch NdSeAMleSS
1/8 - 10 1.0 1.0 1.0 1.01/4 - 12 1.0 1.0 1.0 1.03/8 10 16 1.0 1.0 2.0 2.01/2 15 20 1.0 1.0 2.0 2.03/4 20 25 1.5 1.5 1.5 2.01 25 30 1.5 1.5 1.5 2.5
1 1/4 32 38 1.5 1.5 1.5 2.51 1/2 40 44.5 1.5 1.5 1.5 2.5
2 50 57 1.5 1.5 1.5 2.52 1/2 65 76.1 2.0 2.0 2.0 2.5
3 80 88.9 2.0 2.5 2.5 2.54 100 108 2.5 2.5 2.5 3.05 125 133 2.5 3.0 3.0 3.06 150 159 2.5 3.0 3.0 3.57 175 193.7 2.5 3.5 3.5 3.58 200 219.1 3.0 3.5 3.5 4.5
10 250 267 3.0 4.0 4.0 5.512 300 323.9 4.0 5.0 5.0 7.014 350 368 4.0 5.5 5.5 8.016 400 419.1 4.0 6.0 6.0 9.0
SeAMleSS or SeAM welded18 450 457.2 4.0 6.0 8.0 9.520 500 508 4.5 6.5 8.5 11.0
SeAM welded24 600 610 5.0 8.0 10.5 13.028 700 711 6.0 9.0 12.0 15.032 800 813 6.0 10.0 13.5 17.036 900 914 8.0 11.0 15.5 19.0
europeAN StANdArdSdIMeNSIoN :- Cu-Ni 90/10 Cu-Ni 70/30 SEAMLESS and SEAM Pipe According to Metric Size, Navy(mm, inch) NDS Size.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
13
bars
& p
late
s
bars & plates
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
14
rouNd bArS
HexAgoN bArS
Material : CuNi 90/10Dimension : DIN 1756 / DIN 1782
Material : CuNi 90/10Dimension : DIN 1763
dimension mm weight kg/m dimension mm weight kg/m
12 1.01 65 29.52
15 1.57 70 34.24
18 2.26 75 39.32
20 2.79 80 44.72
25 4.37 90 56.60
30 6.29 100 69.90
35 8.55 110 84.58
40 11.18 130 118.13
45 14.15 175 214.00
50 17.47 234 382.55
55 21.14 300 628.78
60 25.15
dimension mm weight kg/m dimension mm weight kg/m
17 2.23 36 9.96
18 2.78 41 13.00
22 3.70 46 16.30
24 4.44 50 19.30
27 5.62 55 23.31
30 6.94 60 27.74
32 7.89 65 32.56
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
15
HexAgoN bArS
Material : CuNi 90/10Dimension : EN 1652 / EN 1653 ASTM B171
Thickness tmm
Dimension (b × L)weight kg/m21000 × 2000
weight in kg/plate1250 × 2500
weight in kg/plate2.0 35.6 17.802.5 44.5 22.253.0 53.4 26.704.0 111.250 35.604.5 125.156 40.055.0 139.062 44.506.0 106.8 53.408.0 142.4 71.20
10.0 178.0 89.0012.0 213.6 106.815.0 267.0 133.520.0 356.0 178.0
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
16
Buttw
eld
Pipe
Fitt
ings
BuTTWELd PIPE FITTInGS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
17
Elbows R-1D-45°Seamless, Seam welded
Elbows R-1D-90°Seamless, Seam welded
Elbows R-1, 5D-45°Seamless, Seam welded
Elbows R-1, 5D-90°Seamless, Seam welded
Concentric ReducersSeamless
Concentric ReducersSeamless, Seam welded
Eccentric ReducersSeamless
Eccentric ReducersSeam welded
Equal TeesSeamless, Seam welded
Reducing TeesSeamless, Seam welded
SaddlesSeamless, Seam welded
CapsSeamless
BuTTWELd PIPE FITTInGS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
18
elbowS SHort rAdIuSR~1D-45°
10 bAr and 14 BAR
outside diameter of pipes Ød wall thickness e
mm
radiusa
mms
mm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1 30
1.5
30 12 0.021 1/4 38 32.5 14 0.041 1/2 44.5 40 17 0.06
2 57 52.5 22 0.102 1/2 76.1
270 29 0.22
3 88.9 82.5 340.32
2.5 0.404 108
2.5100 41 0.58
5 133 125 520.90
3 1.08
6 1592.5
150 621.30
3 1.56
7 193.73
180 751.90
3.5 2.66
8 219.13
210 873.00
3.5 3.50SeAMleSS or SeAM welded
10 2673
255 1064.40
4 5.87
12 323.94
305 1268.60
5 10.75
14 3684
352.5 14611.30
5.5 15.54SeAM welded
16 419.14
400 16616.40
6 21.87
18 457.24
455 18820.40
6 30.60
20 5084.5
505 20928.10
6.5 42.15
24 6105
610 25340.90
8 65.45
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Material : CuNi 90/10dimension : Extrapolated from DIN 86090
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
19
elbowS SHort rAdIuSR~1D-90°
10 bAr and 14 BAR
outside diameter of pipes Ød wall thickness e
mm
radiusa
mm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1 30
1.5
30 0.041 1/4 38 32.5 0.081 1/2 44.5 40 0.12
2 57 52.5 0.202 1/2 76.1
270 0.44
3 88.9 82.50.64
2.5 0.804 108
2.5100 1.16
5 133 1251.80
3 2.16
6 1592.5
1502.60
3 3.12
7 193.73
1803.80
3.5 5.32
8 219.13
2106.00
3.5 7.00SeAMleSS or SeAM welded
10 2673
2558.80
4 11.74
12 323.94
30517.20
5 21.50
14 3684
352.522.60
5.5 31.08SeAM welded
16 419.14
40032.80
6 43.74
18 457.24
45540.80
6 61.20
20 5084.5
50556.20
6.5 84.30
24 6105
61081.80
8 130.90
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Material : CuNi 90/10dimension : Extrapolated from DIN 86090
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
20
elbowS loNg rAdIuSR~1, 5D-45°
10 bAr and 14 Bar
outside diameter of pipes Ød wall thickness
e mm
radius
amm
smm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1/2 20 1 25 10.4 0.013/4 25
1.5
27.5 11.4 0.021 30 33.5 14 0.03
1 1/4 38 45 19 0.051 1/2 44.5 51 21 0.07
2 57 72 30 0.132 1/2 76.1 2 95 39 0.30
3 88.9 114.5 47 0.43 2.5 0.54
4 108 2.5 142..5 59 0.82
5 133 181 75 1.29 3 1.55
6 159 2.5 216 89 1.85 3 2.22
7 193.7 3 270 112 2.82 3.5 3.94
8 219.1 3 305 126 4.33 3.5 5.04
SeAMleSS or SeAM welded
10 267 3 378 157 6.55 4 8.73
12 323.9 4 457 189 12.80 5 16.00
14 368 4 533.5 221 17.00 5.5 23.37
16 419.1 4 609.5 252 29.90 6 33.20
SeAM welded
18 457.2 4 686 284 30.70 6 46.05
20 508 4.5 762 316 41.90 6.5 62.85
24 610 5 915 379 60.62 8 97.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Material : CuNi 90/10dimension : DIN 86090
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
elbowS loNg rAdIuSR~1, 5D-45°
16 bAr
outside diameter of pipes Ød wall thickness e
mm
radiusa
mm smm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1 30
2.5
38 22 0.061 1/4 38 48 25 0.091 1/2 44.5 57 29 0.13
2 57 76 35 0.232 1/2 76.1 95 44 0.38
3 88.9 114 51 0.544 108
3152 64 1.05
6 159 229 95 2.35SeAMleSS or SeAM welded
8 219.1 4 305 127 5.7510 267 4.5 381 159 9.8512 323.9 5.5 457 190 17.53
SeAM welded14 368 6.5 533 222 27.4616 419.1 7 610 254 38.5018 457.2 8 686 286 54.1020 508 8.5 762 318 70.9324 610 10.5 914 381 126.4228 711 12 1067 438 196.3032 813 13.5 1219 502 288.0036 914 15.5 1372 565 418.60
21
Material : CuNi 90/10dimension : EEMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
22
elbowS loNg rAdIuSR~1, 5D-45°
20 bAr
outside diameter of pipes Ød wall thickness e
mm
radiusa
mm smm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1 30
2.5
38 22 0.061 1/4 38 48 25 0.091 1/2 44.5 57 29 0.13
2 57 76 35 0.232 1/2 76.1 95 44 0.38
3 88.9 114 51 0.544 108 3 152 64 1.056 159 3.5 229 95 2.74
SeAMleSS or SeAM welded8 219.1 4.5 305 127 6.47
10 267 5.5 381 159 12.0412 323.9 7 457 190 22.30
SeAM welded14 368 8 533 222 33.8016 419.1 9 610 254 49.5018 457.2 9.5 686 286 64.2520 508 11 762 318 91.8024 610 13 914 381 156.6028 711 15 1067 438 245.4032 813 17 1219 502 363.8536 914 19 1372 565 513.13
Material : CuNi 90/10dimension : EEMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
23
elbowS loNg rAdIuSR~1, 5D-90°
10 bAr and 14 Bar
outside diameter of pipes Ød wall thickness
e mm
radius
amm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1/2 20 1 25 0.023/4 25
1.5
27.5 0.041 30 33.5 0.06
1 1/4 38 45 0.101 1/2 44.5 51 0.14
2 57 72 0.262 1/2 76.1 2 95 0.61
3 88.9 114.5 0.87 2.5 1.08
4 108 2.5 142..5 1.64
5 133 181 2.58 3 3.10
6 159 2.5 216 3.70 3 4.44
7 193.7 3 270 5.65 3.5 7.88
8 219.1 3 305 8.66 3.5 10.08
SeAMleSS or SeAM welded
10 267 3 378 13.10 4 17.46
12 323.9 4 457 25.61 5 32.00
14 368 4 533.5 34.00 5.5 46.74
SeAM welded
16 419.1 4 609.5 39.40 6 66.40
18 457.2 4 686 48.40 6 72.63
20 508 4.5 762 75.62 6.5 125.70
24 610 5 915 121.24 8 194.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Material : CuNi 90/10dimension : DIN 86090
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
24
elbowS loNg rAdIuSR~1, 5D-90°
16 bAr
outside diameter of pipes Ød wall thickness
e mm
radius
amm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1 30
2.5
38 0.121 1/4 38 48 0.181 1/2 44.5 57 0.26
2 57 76 0.462 1/2 76.1 95 0.76
3 88.9 114 1.084 108
3152 2.10
6 159 229 4.70SeAMleSS or SeAM welded
8 219.1 4 305 11.5010 267 4.5 381 19.7012 323.9 5.5 457 35.06
SeAM welded14 368 6.5 533 54.9216 419.1 7 610 77.0018 457.2 8 686 108.2020 508 8.5 762 141.8624 610 10.5 914 252.9428 711 12 1067 392.6032 813 13.5 1219 577.9036 914 15.5 1372 837.20
Material : CuNi 90/10dimension : EEMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
25
elbowS loNg rAdIuSR~1, 5D-90°
20 bAr
outside diameter of pipes Ød wall thickness e
mm
radiusa
mm
Theoretical weightkg/piecenomial
inchactualmm
SeAMleSS1 30
2.5
38 0.121 1/4 38 48 0.181 1/2 44.5 57 0.26
2 57 76 0.462 1/2 76.1 95 0.76
3 88.9 114 1.084 108 3 152 2.106 159 3.5 229 5.48
SeAMleSS or SeAM welded8 219.1 4.5 305 12.94
10 267 5.5 381 24.0812 323.9 7 457 44.60
SeAM welded14 368 8 533 67.6016 419.1 9 610 99.0018 457.2 9.5 686 128.5020 508 11 762 183.6024 610 13 914 313.3028 711 15 1067 490.8032 813 17 1219 727.7036 914 19 1372 1026.26
Material : CuNi 90/10dimension : EEMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
CoNCeNtrIC reduCerS 10 bAr and 14 Bar
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS1/2 × 3/8 20 × 16 1 1 30 0.01
3/4 × 3/8 25 × 16 1.5 1 30 0.02× 1/2 × 20 1 0.03
1× 3/8
30× 16
1.51
350.03
× 1/2 × 20 1 0.04× 3/4 × 25 1.5 0.05
1 1/4
× 3/8
38
× 16
1.5
1
50
0.05× 1/2 × 20 1 0.06× 3/4 × 25 1.5 0.07× 1 × 30 1.5 0.08
1 1/2
× 1/2
44.5
× 20
1.5
1
80
0.09× 3/4 × 25 1.5 0.11× 1 × 30 1.5 0.12× 1 1/4 × 38 1.5 0.13
2
× 3/4
57
× 25
1.5
1.5
80
0.13× 1 × 30 1.5 0.14× 1 1/4 × 38 1.5 0.15× 1 1/2 × 44.5 1.5 0.16
2 1/2
× 1
76.1
× 30
2
1.5
90
0.24× 1 1/4 × 38 1.5 0.25× 1 1/2 × 44.5 1.5 0.26× 2 × 57 1.5 0.29
3
× 1 1/4
88.9
× 38
2
1.5
90
0.29× 1 1/2 × 44.5 1.5 0.30× 2 × 57 1.5 0.32× 2 1/2 × 76.1 2 0.40
3
× 1 1/4
88.9
× 38
2.5
1.5
90
0.33× 1 1/2 × 44.5 1.5 0.35× 2 × 57 1.5 0.38× 2 1/2 × 76.1 2 0.48
4
× 1 1/2
108
× 44.5
2.5
1.5
100
0.46× 2 × 57 1.5 0.48× 2 1/2 × 76.1 2 0.57× 3 × 88.9 2 0.61× 3 × 88.9 2.5 0.61
* other dimensions, wall thicknesses and outside diameters are also available upon request.
26
Material : CuNi 90/10dimension : DIN 86089
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
27
Material : CuNi 90/10dimension : DIN 86089
CoNCeNtrIC reduCerS 10 bAr and 14 Bar
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS
5
× 2
133
× 57
2.5
1.5
140
0.80× 2 1/2 × 76.1 2 0.93× 3 × 88.9 2 0.98× 4 × 108 2.5 1.16
5
× 2
133
× 57
3
1.5
140
0.86× 2 1/2 × 76.1 2 1.06× 3 × 88.9 2.5 1.13× 4 × 108 2.5 1.34
6
× 2 1/2
159
× 76.1
2.5
2
150
1.13× 3 × 88.9 2 1.19× 4 × 108 2.5 1.38× 5 × 133 2.5 1.51
6
× 2 1/2
159
× 76.1
3
2
150
1.35× 3 × 88.9 2.5 1.42× 4 × 108 2.5 1.65× 5 × 133 3 1.81
7
× 3
193.7
× 88.9
3
2
155
1.39× 4 × 108 2.5 1.58× 5 × 133 2.5 1.71× 6 × 159 2.5 1.86
7
× 3
193.7
× 88.9
3.5
2.5
155
1.94× 4 × 108 2.5 2.21× 5 × 133 3 2.39× 6 × 159 3 2.60
8
× 4
219.7
× 108
3
2.5
155
2.47× 5 × 133 2.5 2.60× 6 × 159 2.5 2.74× 7 × 193.7 3 2.93
8
× 4
219.7
× 108
3.5
2.5
155
2.88× 5 × 133 3 3.03× 6 × 159 3 3.20× 7 × 193.7 3.5 3.42
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
28
Material : CuNi 90/10dimension : DIN 86089
CoNCeNtrIC reduCerS 10 bAr and 14 Bar
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS
10
× 5
267
× 133
3
2.5
210
3.30× 6 × 159 2.5 3.49× 7 × 193.7 3 3.75× 8 × 219.1 3 4.25
10
× 5
267
× 133
4
3
210
4.40× 6 × 159 3 4.65× 7 × 193.7 3.5 5.00× 8 × 219.1 3.5 5.65
12× 7
323.9× 193.7
43
2106.02
× 8 × 219.1 3 6.30× 10 × 267 3 6.88
14× 8
368× 219.1
43
3009.76
× 10 × 267 3 10.57× 12 × 323.9 4 11.53
16× 10
419.1× 267
43
30012.38
× 12 × 323.9 4 13.42× 14 × 368 4 14.22
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
29
Material : CuNi 90/10dimension : DIN 86089
CoNCeNtrIC reduCerS 10 bAr and 14 Bar
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS or SEAM WELDED
12× 5
323.9× 133
42.5
2105.30
× 6 × 159 2.5 5.60
12
× 5
323.9
× 133
5
3
210
6.62× 6 × 159 3 7.00× 7 × 193.7 3.5 7.52× 8 × 219.1 3.5 7.90× 10 × 267 4 8.60
14× 6
368× 159
42.5
3008.75
× 7 × 193.7 2.5 9.34
14
× 6
368
× 159
5.5
3
300
12.03× 7 × 193.7 3 12.84× 8 × 219.1 3.5 13.42× 10 × 267 4 14.53× 12 × 323.9 5 15.85
16× 7
419.1× 193.7
42.5
32511.04
× 8 × 219.1 3 11.50
16
× 7
419.1
× 193.7
6
3.5
325
16.56× 8 × 219.1 3.5 17.25× 10 × 267 4 18.57× 12 × 323.9 5 20.13× 14 × 368 5.5 21.33
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
30
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
CoNCeNtrIC reduCerS 16 bAr
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS1 × 3/4 30 × 25 2.5 2 51 0.09
1 1/4× 3/4
38× 25
2.52
510.10
× 1 × 30 2.5 0.11
1 1/2× 3/4
44.5× 25
2.52
640.14
× 1 × 30 2.5 0.15× 1 1/4 × 38 2.5 0.17
2× 1
57× 30
2.52.5
760.21
× 1 1/4 × 38 2.5 0.23× 1 1/2 × 44.5 2.5 0.25
2 1/2× 1 1/4
76.1× 38
2.52.5
890.34
× 1 1/2 × 44.5 2.5 0.36× 2 × 57 2.5 0.40
3× 1 1/2
88.9× 44.5
2.52.5
890.40
× 2 × 57 2.5 0.44× 2 1/2 × 76.1 2.5 0.50
4× 2
108× 57
32.5
1020.68
× 2 1/2 × 76.1 2.5 0.78× 3 × 88.9 2.5 0.82
6
× 2
159
× 57
3
2.5
140
1.30× 2 1/2 × 76.1 2.5 1.35× 3 × 88.9 2.5 1.42× 4 × 108 3 1.54
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
Material : CuNi 90/10dimension : DIN 86090
CoNCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAM WELDED
18
× 8
457.2
× 219.1
4
3
350
13.14× 10 × 267 3 14.08× 12 × 323.9 4 15.20× 14 × 368 4 16.06× 16 × 419.1 4 17.07
18
× 8
457.2
× 219.1
6
3.5
350
19.70× 10 × 267 4 21.10× 12 × 323.9 5 22.80× 14 × 368 5.5 24.10× 16 × 419.1 6 25.80
20
× 10
508
× 267
4.5
3
375
18.07× 12 × 323.9 4 19.42× 14 × 368 4 20.47× 16 × 419.1 4 21.68× 18 × 457.2 4 22.57
20
× 10
508
× 267
6.5
4
375
26.10× 12 × 323.9 5 28.05× 14 × 368 5.5 29.60× 16 × 419.1 6 31.30× 18 × 457.2 6 32.60
24
× 14
610
× 368
5
4
400
27.19× 16 × 419.1 4 28.62× 18 × 457.2 4 29.69× 20 × 508 4.5 31.12
24
× 14
610
× 368
8
5.5
400
43.50× 16 × 419.1 6 45.80× 18 × 457.2 6 47.50× 20 × 508 6.5 49.80
* other dimensions, wall thicknesses and outside diameters are also available upon request.
10 bAr and 14 Bar
31
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
CoNCeNtrIC reduCerS 10 bAr and 14 Bar
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS or SEAM WELDED
8
× 2 1/2
219.1
× 76.1
4
2.5
152
2.45× 3 × 88.9 2.5 2.55× 4 × 108 3 2.72× 6 × 159 3 3.16
10× 4
267× 108
4.53
1784.11
× 6 × 159 3 4.69× 8 × 219.1 4 5.36
12× 6
323.9× 159
5.53
2037.39
× 8 × 219.1 4 8.33× 10 × 267 4.5 9.09
14× 8
368× 219.1
6.54
33017.28
× 10 × 267 4.5 18.73× 12 × 323.9 5.5 20.44
16× 10
419.1× 267
74.5
35623.51
× 12 × 323.9 5.5 25.51× 14 × 368 6.5 27.04
SEAM WELDED
18× 12
457.2× 323.9
85.5
38132.72
× 14 × 368 6.5 34.61× 16 × 419.1 7 36.80
20× 14
508× 368
8.56.5
50852.07
× 16 × 419.1 7 55.17× 18 × 457.2 8 57.48
24× 16
610× 419.1
10.57
50875.49
× 18 × 457.2 8 78.34× 20 × 508 8.5 82.15
28× 18
711× 457.2
128
610117.58
× 20 × 508 8.5 122.82× 24 × 610 10.5 133.30
32 × 24 813 × 610 13.5 10.5 610 161.42× 28 × 711 12 173.09
36× 24
914× 610
15.510.5
610274.48
× 28 × 711 12 287.89× 32 × 813 13.5 301.43
32
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
33
CoNCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAM WELDED1 × 3/4 30 × 25 2.5 2 51 0.09
1 1/4 × 3/4 38 × 25 2.5 2 51 0.10× 1 × 30 2.5 0.11
1 1/2× 3/4
44.5× 25
2.52
640.14
× 1 × 30 2.5 0.15× 1 1/4 × 38 2.5 0.17
2× 1
57× 30
2.52.5
760.21
× 1 1/4 × 38 2.5 0.23× 1 1/2 × 44.5 2.5 0.25
2 1/2× 1 1/4
76.1× 38
2.52.5
890.34
× 1 1/2 × 44.5 2.5 0.36× 2 × 57 2.5 0.40
3× 1 1/2
88.9× 44.5
2.52.5
890.40
× 2 × 57 2.5 0.44× 2 1/2 × 76.1 2.5 0.50
4× 2
108× 57
32.5
1020.68
× 2 1/2 × 76.1 2.5 0.76× 3 × 88.9 2.5 0.82
6
× 2
159
× 57
3.5
2.5
140
1.50× 2 1/2 × 76.1 2.5 1.56× 3 × 88.9 2.5 1.65× 4 × 108 3 1.78
20 bAr
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
34
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
CoNCeNtrIC reduCerS 20 bAr
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS or SEAM WELDED
8
× 2 1/2
219.1
× 76.1
4.5
2.5
152
2.74× 3 × 88.9 2.5 2.87× 4 × 108 3 3.05× 6 × 159 3.5 3.54
10× 4
267× 108
5.53
1785.00
× 6 × 159 3.5 5.70× 8 × 219.1 4.5 6.53
12× 6
323.9× 159
73.5
2039.35
× 8 × 219.1 4.5 10.55× 10 × 267 5.5 11.52
14× 8
368× 219.1
84.5
33021.16
× 10 × 267 5.5 22.95× 12 × 323.9 7 25.06
16× 10
419.1× 267
95.5
35630.05
× 12 × 323.9 7 32.62× 14 × 368 8 34.60
SEAM WELDED
18× 12
457.2× 323.9
9.57
38138.85
× 14 × 368 8 41.10× 16 × 419.1 9 43.70
20× 14
508× 368
118
50867.38
× 16 × 419.1 9 71.39× 18 × 457.2 9.5 74.38
24× 16
610× 419.1
139
50893.46
× 18 × 457.2 9.5 96.99× 20 × 508 11 101.70
28× 18
711× 457.2
159.5
610146.97
× 20 × 508 11 153.52× 24 × 610 13 166.62
32 × 24 813 × 610 17 13 610 203.26× 28 × 711 15 217.96
36× 24
914× 610
1913
610336.45
× 28 × 711 15 352.89× 32 × 813 17 369.49
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
35
Material : CuNi 90/10
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS1/2 × 3/8 20 × 16 1 1 30 0.01
3/4 × 3/8 25 × 16 1.5 1 30 0.02× 1/2 × 20 1 0.03
1× 3/8
30× 16
1.51
350.03
× 1/2 × 20 1 0.04× 3/4 × 25 1.5 0.05
1 1/4
× 3/8
38
× 16
1.5
1
50
0.05× 1/2 × 20 1 0.06× 3/4 × 25 1.5 0.07× 1 × 30 1.5 0.08
1 1/2
× 1/2
44.5
× 20
1.5
1
80
0.09× 3/4 × 25 1.5 0.11× 1 × 30 1.5 0.12× 1 1/4 × 38 1.5 0.13
2
× 3/4
57
× 25
1.5
1.5
80
0.13× 1 × 30 1.5 0.14× 1 1/4 × 38 1.5 0.15× 1 1/2 × 44.5 1.5 0.16
2 1/2
× 1
76.1
× 30
2
1.5
90
0.24× 1 1/4 × 38 1.5 0.25× 1 1/2 × 44.5 1.5 0.26× 2 × 57 1.5 0.29
3
× 1 1/4
88.9
× 38
2
1.5
90
0.29× 1 1/2 × 44.5 1.5 0.30× 2 × 57 1.5 0.32× 2 1/2 × 76 2 0.40
3
× 1 1/4
88.9
× 38
2.5
1.5
90
0.29× 1 1/2 × 44.5 1.5 0.30× 2 × 57 1.5 0.32× 2 1/2 × 76.1 2 0.40
4
× 1 1/2
108
× 44.5
2.5
1.5
100
0.46× 2 × 57 1.5 0.48× 2 1/2 × 76.1 2 0.57× 3 × 88.9 2 0.61× 3 × 88.9 2.5 0.61
* other dimensions, wall thicknesses and outside diameters are also available upon request.
10 bAr and 14 Bar
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
36
Material : CuNi 90/10
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS
5
× 2
133
× 57
2.5
1.5
140
0.80× 2 1/2 × 76.1 2 0.93× 3 × 88.9 2 0.98× 4 × 108 2.5 1.16
5
× 2
133
× 57
3
1.5
140
0.86× 2 1/2 × 76.1 2 1.06× 3 × 88.9 2.5 1.13× 4 × 108 2.5 1.34
6
× 2 1/2
159
× 76.1
2.5
2
150
1.13× 3 × 88.9 2 1.19× 4 × 108 2.5 1.38× 5 × 133 2.5 1.51
6
× 2 1/2
159
× 76.1
3
2
150
1.35× 3 × 88.9 2.5 1.42× 4 × 108 2.5 1.65× 5 × 133 3 1.81
7
× 3
193.7
× 88.9
3
2
155
1.39× 4 × 108 2.5 1.58× 5 × 133 2.5 1.71× 6 × 159 2.5 1.85
7
× 3
193.7
× 88.9
3.5
2.5
155
1.94× 4 × 108 2.5 2.21× 5 × 133 3 2.39× 6 × 159 3 2.60
8
× 4
219.1
× 108
3
2.5
155
2.47× 5 × 133 2.5 2.60× 6 × 159 2.5 2.74× 7 × 193.7 3 2.93
8
× 4
219.1
× 108
3.5
2
155
2.88× 5 × 133 3 3.03× 6 × 159 3 3.20× 7 × 193.7 3.5 3.42
* other dimensions, wall thicknesses and outside diameters are also available upon request.
10 bAr and 14 Bar
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
37
Material : CuNi 90/10
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAM WELDED
10
× 5
267
× 133
3
2.5
210
3.30× 6 × 159 2.5 3.49× 7 × 193.7 3 3.75× 8 × 219.1 3 4.25
10
× 5
267
× 133
4
3
210
4.40× 6 × 159 3 4.65× 7 × 193.7 3.5 5.00× 8 × 219.1 3.5 5.65
12
× 5
323.9
× 133
4
2.5
210
5.30× 6 × 159 2.5 5.60× 7 × 193.7 3 6.02× 8 × 219.1 3 6.30× 10 × 267 3 6.88
14
× 5
323.9
× 133
5
3
210
6.62× 6 × 159 3 7.00× 7 × 193.7 3.5 7.52× 8 × 219.1 3.5 7.90× 10 × 267 4 8.60
14
× 6
368
× 159
4
2.5
300
8.75× 7 × 193.7 3 9.34× 8 × 219.1 3 9.76× 10 × 267 3 10.57× 12 × 323.3 4 11.53
14
× 6
368
× 159
5.5
3
300
12.03× 7 × 193.7 3.5 12.84× 8 × 219.1 3.5 13.42× 10 × 267 4 14.53× 12 × 323.3 5 15.85
16
× 7
419.1
× 193.7
4
3
325
11.04× 8 × 219.1 3 11.50× 10 × 267 3 12.38× 12 × 323.9 4 13.42× 14 × 368 4 14.22
* other dimensions, wall thicknesses and outside diameters are also available upon request.
10 bAr and 14 Bar
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
38
Material : CuNi 90/10
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAM WELDED
16
× 7
419.1
× 193.7
6
3.5
325
16.56× 8 × 219.7 3.5 17.25× 10 × 267 4 18.57× 12 × 323.9 5 20.13× 14 × 368 5.5 21.33
18
× 8
457.2
× 219.1
4
3
350
13.14× 10 × 267 3 14.08× 12 × 323.9 4 15.20× 14 × 368 4 16.06× 16 × 419.1 4 17.07
18
× 8
457.2
× 219.1
6
3.5
350
19.70× 10 × 267 4 21.10× 12 × 323.9 5 22.80× 14 × 368 5.5 24.10× 16 × 419.1 6 25.60
20
× 10
508
× 267
4.5
3
375
18.07× 12 × 323.9 4 19.42× 14 × 368 4 20.47× 16 × 419.1 4 21.68× 18 × 457.2 4 22.57
20
× 10
508
× 267
6.5
4
375
26.10× 12 × 323.9 5 28.05× 14 × 368 5.5 29.60× 16 × 419.1 6 31.30× 18 × 457.2 6 32.60
24
× 14
610
× 368
5
4
400
27.19× 16 × 419.1 4 28.62× 18 × 457.2 4 29.69× 20 × 508 4.5 31.12
24
× 14
610
× 368
8
5.5
400
43.50× 16 × 419.1 6 45.80× 18 × 457.2 6 47.50× 20 × 508 6.5 49.80
* other dimensions, wall thicknesses and outside diameters are also available upon request.
10 bAr and 14 Bar
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
39
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS1 × 3/4 30 × 25 2.5 2 51 0.09
1 1/4× 3/4
38× 25
2.52
510.10
× 1 × 30 2.5 0.11
1 1/2× 3/4
44.5× 25
2.52
640.14
× 1 × 30 2.5 0.15× 1 1/4 × 38 2.5 0.17
2× 1
57× 30
2.52.5
760.21
× 1 1/4 × 38 2.5 0.23× 1 1/2 × 44.5 2.5 0.25
2 1/2× 1 1/4
76.1× 38
2.52.5
890.34
× 1 1/2 × 44.5 2.5 0.36× 2 × 57 2.5 0.40
3× 1 1/2
88.9× 44.5
2.52.5
890.40
× 2 × 57 2.5 0.44× 2 1/2 × 76.1 2.5 0.50
4× 2
108× 57
32.5
1020.68
× 2 1/2 × 76.1 2.5 0.76× 3 × 88.9 2.5 0.82
6
× 2
159
× 57
3
2.5
140
1.30× 2 1/2 × 76.1 2.5 1.35× 3 × 88.9 2.5 1.42× 4 × 108 3 1.54
16 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
40
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAM WELDED
8
× 2 1/2
219.1
× 76.1
4
2.5
152
2.45× 3 × 88.9 2.5 2.55× 4 × 108 3 2.75× 6 × 159 3 3.16
10× 4
267× 108
4.53
1784.11
× 6 × 159 3 4.69× 8 × 219.1 4 5.36
12× 6
323.9× 159
5.53
2037.39
× 8 × 219.1 4 8.33× 10 × 267 4.5 9.09
14× 8
368× 219.1
6.54
33017.28
× 10 × 267 4.5 18.73× 12 × 323.9 5.5 20.44
16× 10
419.1× 267
74.5
35623.51
× 12 × 323.9 5.5 25.51× 14 × 368 6.5 27.04
18× 12
457.2× 323.9
85.5
38132.72
× 14 × 368 6.5 34.61× 16 × 419.1 7 36.80
20× 14
508× 368
8.56.5
50852.07
× 16 × 419.1 7 55.17× 18 × 457.2 8 57.48
24× 16
610× 419.1
10.57
50875.49
× 18 × 457.2 8 78.34× 20 × 508 8.5 82.15
28× 18
711× 457.2
128
610117.58
× 20 × 508 8.5 122.82× 24 × 610 10.5 133.30
32× 24
813× 610
13.510.5
610161.42
× 28 × 711 12 173.09
36× 24
914× 610
15.510.5
610274.48
× 28 × 711 12 287.89× 32 × 813 13.5 301.43
16 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
41
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAMLESS1 × 3/4 30 × 25 2.5 2 51 0.09
1 1/4× 3/4
38× 25
2.52
510.10
× 1 × 30 2.5 0.11
1 1/2× 3/4
44.5× 25
2.52
640.14
× 1 × 30 2.5 0.15× 1 1/4 × 38 2.5 0.17
2× 1
57× 30
2.52.5
760.21
× 1 1/4 × 38 2.5 0.23× 1 1/2 × 44.5 2.5 0.25
2 1/2× 1 1/4
76.1× 38
2.52.5
890.34
× 1 1/2 × 44.5 2.5 0.36× 2 × 57 2.5 0.40
3× 1 1/2
88.9× 44.5
2.52.5
890.40
× 2 × 57 2.5 0.44× 2 1/2 × 76.1 2.5 0.50
4× 2
108× 57
32.5
1020.68
× 2 1/2 × 76.1 2.5 0.76× 3 × 88.9 2.5 0.82
6
× 2
159
× 57
3.5
2.5
140
1.50× 2 1/2 × 76.1 2.5 1.56× 3 × 88.9 2.5 1.65× 4 × 108 3 1.78
20 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
42
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
eCCeNtrIC reduCerS
outside diameter wall thickness length Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
lmm kg/piece
SEAM WELDED
8
× 2 1/2
219.1
× 76.1
4.5
2.5
152
2.74× 3 × 88.9 2.5 2.87× 4 × 108 3 3.05× 6 × 159 3.5 3.54
10× 4
267× 108
5.53
1785.00
× 6 × 159 3.5 5.70× 8 × 219.1 4.5 6.53
12× 6
323.9× 159
73.5
2039.35
× 8 × 219.1 4.5 10.55× 10 × 267 5.5 11.52
14× 8
368× 219.1
84.5
33021.16
× 10 × 267 5.5 22.95× 12 × 323.9 7 25.06
16× 10
419.1× 267
95.5
35630.05
× 12 × 323.9 7 32.62× 14 × 368 8 35.60
18× 12
457.2× 323.9
9.57
38138.85
× 14 × 368 8 41.10× 16 × 419.1 9 43.70
20× 14
508× 368
118
50867.38
× 16 × 419.1 9 71.39× 18 × 457.2 9.5 74.38
24× 16
610× 419.1
139
50893.46
× 18 × 457.2 9.5 96.99× 20 × 508 11 101.70
28× 18
711× 457.2
159.5
610146.97
× 20 × 508 11 153.52× 24 × 610 13 166.62
32 × 24 813 × 610 17 13 610 203.26× 28 × 711 15 217.96
36× 24
914× 610
1913
610336.45
× 28 × 711 15 352.89× 32 × 813 17 369.49
16 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
43
Material : CuNi 90/10 dimension : DIN 86088
eQuAl teeS
outside diameter of pipes Ød wall thickness A C Theoretical
weightnominal
inchactualmm
emm mm mm kg/piece
SEAMLESS1/2 20 1 25 25 0.053/4 25 1.5 29 29 0.071 30 1.5 38 38 0.10
1 1/4 38 1.5 48 48 0.131 1/2 44.5 1.5 57 57 0.19
2 57 1.5 64 64 0.292 1/2 76.1 2 76 76 0.65
3 88.9 2 86 86 0.822.5 86 86 1.03
4 108 2.5 105 105 1.60
5 133 2.5 124 124 2.803 124 124 3.36
6 159 2.5 143 143 4.403 143 143 5.28
7 193.7 3 157 157 4.703.5 157 157 6.60
8 219.1 3 178 178 12.803.5 178 178 14.95
SEAM WELDED
10 267 3 216 216 16.604 216 216 22.10
12 323.9 4 254 254 31.505 254 254 39.40
14 368 4 279 279 39.405.5 279 279 54.20
16 419.1 4 305 305 55.106 305 305 82.65
18 457.2 4 343 343 67.656 343 343 101.50
20 508 4.5 381 381 92.806.5 381 381 134.10
24 610 5 432 432 126.608 432 432 202.60
* other dimensions, wall thicknesses and outside diameters are also available upon request.
10 bAr and 14 Bar
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
44
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
eQuAl teeS
outside diameter of pipes Ød wall thickness A C Theoretical
weightnominal
inchactualmm
emm mm mm kg/piece
SEAMLESS1 30
2.5
38 38 0.181 1/4 38 48 48 0.291 1/2 44.5 57 57 0.43
2 57 64 64 0.572 1/2 76.1 76 76 0.88
3 88.9 86 86 1.164 108 3 105 105 2.096 159 143 143 4.078 219.1 4 178 178 17.00
WELDED10 267 4.5 216 216 24.9012 323.9 5.5 254 254 43.3014 368 6.5 279 279 64.0516 419.1 7 305 305 96.4018 457.2 8 343 343 135.3020 508 8.5 381 381 175.3024 610 10.5 432 432 265.9028 711 12.0 521 521 427.0032 813 13.5 597 597 546.1036 914 15.5 673 673 794.10
16 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
45
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
eQuAl teeS
outside diameter of pipes Ød wall thickness A C Theoretical
weightnominal
inchactualmm
emm mm mm kg/piece
SEAMLESS1 30
2.5
38 38 0.181 1/4 38 48 48 0.291 1/2 44.5 57 57 0.43
2 57 64 64 0.572 1/2 76 76 76 0.88
3 89 86 86 1.164 108 3 105 105 2.096 159 3.5 143 143 4.748 219 4.5 178 178 19.10
SEAM WELDED10 267 5.5 216 216 30.4012 324 7 254 254 55.1014 368 8 279 279 78.8016 419 9 305 305 124.0018 457 9.5 343 343 160.6520 508 11 381 381 226.9024 610 13 432 432 329.2028 711 15 521 521 533.7532 813 17 597 597 687.7036 914 19 673 673 973.40
20 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
46
Material : CuNi 90/10 dimension : DIN 86088
reduCINg teeS 10 bAr and 14 Bar
outside diameter wall thickness
Center to faceTheoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm
kg/piece
SEAMLESS1 1/4 × 1 38 × 30 1.5 1.5 48 42 0.10
1 1/2 × 1 44.5 × 30 1.5 1.5 57 45 0.21× 1 1/4 × 38 1.5 51 0.21
2× 1
57× 30
1.51.5
6451 0.32
× 1 1/4 × 38 1.5 57 0.32× 1 1/2 × 44.5 1.5 63 0.32
2 1/2
× 1
76.1
× 30
2
1.5
76
56 0.65× 1 1/4 × 38 1.5 62 0.65× 1 1/2 × 44.5 1.5 71 0.67× 2 × 57 1.5 73 0.67
3
× 1 1/4
88.9
× 38
2
1.5
86
73 0.87× 1 1/2 × 44.5 1.5 76 0.87× 2 × 57 1.5 80 0.89× 2 1/2 × 76.1 2 83 0.92
3
× 1 1/4
88.9
× 38
2.5
1.5
86
73 1.08× 1 1/2 × 44.5 1.5 76 1.08× 2 × 57 1.5 80 1.10× 2 1/2 × 76.1 2 83 1.15
4
× 1 1/2
108
× 44.5
2.5
1.5
105
89 1.60× 2 × 57 1.5 90 1.60× 2 1/2 × 76.1 2 92 1.65× 3 × 88.9 2 96 1.65× 3 × 88.9 2.5 96 1.65
5
× 2
133
× 57
2.5
1.5
124
98 3.00× 2 1/2 × 76.1 2 105 3.10× 3 × 88.9 2 108 3.25× 4 × 108 2.5 117 3.30
5
× 2
133
× 57
3
1.5
124
98 3.60× 2 1/2 × 76.1 2 105 3.70× 3 × 88.9 2.5 108 3.90× 4 × 108 2.5 117 3.95
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
47
Material : CuNi 90/10 dimension : DIN 86088
reduCINg teeS 10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAMLESS
6
× 2 1/2
159
× 76.1
2.5
2
143
118 4.40× 3 × 88.9 2 121 4.50× 4 × 108 2.5 130 4.60× 5 × 133 2.5 136 4.60
6
× 2 1/2
159
× 76.1
3
2
143
118 5.25× 3 × 88.9 2.5 121 5.40× 4 × 108 2.5 130 5.50× 5 × 133 3 136 5.50
8× 4
219.1× 108
32.5
178156 12.60
× 5 × 133 2.5 162 12.70× 6 × 159 2.5 168 12.80
8× 4
219.1× 108
3.52.5
178156 14.75
× 5 × 133 3 162 14.85× 6 × 159 3 168 14.95
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
48
Material : CuNi 90/10 dimension : DIN 86088
reduCINg teeS 10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAM WELDED
10
× 4
267
× 108
3
2.5 194 209 12.50× 5 × 133 2.5 217 219 13.50× 6 × 159 2.5 240 229 14.80× 7 × 193.7 3 267 243 15.20× 8 × 219.1 3 290 259 16.60
10
× 4
267
× 108
4
2.5 194 209 16.70× 5 × 133 3 217 219 18.00× 6 × 159 3 240 229 19.75× 7 × 193.7 3.5 267 243 20.25× 8 × 219.1 3.5 290 259 22.10
12
× 5
323.9
× 133
4
2.5 217 247 28.60× 6 × 159 2.5 240 257 30.45× 7 × 193.7 3 267 272 32.60× 8 × 219.1 3 290 287 34.60× 10 × 267 3 324 317 37.80
12
× 5
323.9
× 133
5
3 217 247 35.75× 6 × 159 3 240 257 38.00× 7 × 193.7 3.5 267 272 40.75× 8 × 219.1 3.5 290 287 43.25× 10 × 267 4 324 317 47.25
14
× 6
360
× 159
4
2.5 240 279 37.40× 7 × 193.7 3 267 294 39.85× 8 × 219.1 3 290 309 42.10× 10 × 267 3 324 339 45.55× 12 × 323.9 4 380 369 52.00
14
× 6
368
× 159
5.5
3 240 279 51.40× 7 × 193.7 3.5 267 294 54.20× 8 × 219.1 3.5 290 309 57.90× 10 × 267 4 324 339 62.65× 12 × 323.9 5 380 369 71.50
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
49
Material : CuNi 90/10 dimension : DIN 86088
reduCINg teeS 10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAM WELDED
16
× 7
419.1
× 193.7
4
3 267 319 49.10× 8 × 219.1 3 290 335 52.10× 10 × 267 3 324 365 56.40× 12 × 323.9 4 380 395 64.80× 14 × 368 4 407 410 68.90
16
× 7
419.1
× 193.7
6
3.5 267 319 73.65× 8 × 219.1 3.5 290 335 78.15× 10 × 267 4 324 365 84.60× 12 × 323.9 5 380 395 97.20× 14 × 368 5.5 407 410 103.35
18
× 10
457.2
× 267
4
3 324 383 55.70× 12 × 323.9 4 380 413 64.60× 14 × 368 4 407 428 68.90× 16 × 419.1 4 440 453 74.60
18
× 10
457.2
× 267
6
4 324 383 83.55× 12 × 323.9 5 380 413 96.90× 14 × 369 5.5 407 428 103.35× 16 × 419.1 6 440 453 111.90
20
× 12
508
× 323.9
4.5
4 380 439 72.50× 14 × 368 4 407 454 77.40× 16 × 419.1 4 440 479 83.90× 18 × 457.2 4 500 509 94.10
20
× 12
508
× 323.9
6.5
5 380 439 104.70× 14 × 368 5.5 407 454 111.80× 16 × 419.1 6 440 479 121.20× 18 × 457.2 6 500 509 135.90
24
× 14
610
× 368
5
4 407 505 109.95× 16 × 419.1 4 440 530 117.85× 18 × 457.2 4 500 555 130.35× 20 × 508 4.5 540 580 141.85
24
14
610
× 368
8
5.5 407 505 175.9016 × 419.1 6 440 530 188.5518 × 457.2 6 500 555 208.6020 × 508 6.5 540 580 226.95
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
50
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
reduCINg teeS 16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAMLESS1 × 3/4 30 × 25 2.5 2 38 38 0.17
1 1/4 × 3/4 38 × 25 2.5 2 48 48 0.28× 1 × 30 2.5 0.28
1 1/2× 3/4
44.5× 25
2.52
57 570.37
× 1 × 30 2.5 0.40× 1 1/4 × 38 2.5 0.41
2× 1
57× 30
2.52.5
6451 0.51
× 1 1/4 × 38 2.5 57 0.54× 1 1/2 × 44.5 2.5 60 0.55
2 1/2× 1 1/4
76.1× 38
2.52.5
7664 0.83
× 1 1/2 × 44.5 2.5 67 0.84× 2 × 57 2.5 70 0.85
3× 1 1/2
88.9× 44.5
2.52.5
8673 1.10
× 2 × 57 2.5 76 1.12× 2 1/2 × 76.1 2.5 83 1.15
4× 2
108× 57
32.5
10589 1.90
× 2 1/2 × 76.1 2.5 95 1.92× 3 × 88.9 2.5 98 1.95
6× 2 1/2
159× 76.1
32.5
143121 3.95
× 3 × 88.9 2.5 124 4.00× 4 × 108 3 130 4.05
8× 3
219.1× 88.9
42.5
178152 16.60
× 4 × 108 3 156 16.90× 6 × 159 3 168 17.00
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
51
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
reduCINg teeS 16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAM WELDED
10× 4
267× 108
4.53
216184 21.60
× 6 × 159 3 194 21.75× 8 × 219.1 4 203 21.90
12× 6
323.9× 159
5.53
254219 38.50
× 8 × 219.1 4 229 39.60× 10 × 267 4.5 241 40.70
14× 8
368× 219.1
6.54
279248 58.80
× 10 × 267 4.5 257 59.70× 12 × 323.9 5.5 270 61.50
16× 10
419.1× 267
74.5
305283 89.60
× 12 × 323.9 5.5 295 91.40× 14 × 368 6.5 305 93.50
18× 12
457.2× 323.9
85.5
343321 126.30
× 14 × 368 6.5 330 128.30× 16 × 419.1 7 330 129.90
20× 14
508× 368
8.56.5
381356 162.00
× 16 × 419.1 7 356 164.20× 18 × 457.2 8 368 168.30
24× 8
610× 419.1
10.57
432406 248.30
× 10 × 457.2 8 419 251.70× 12 × 508 8.5 432 255.30
29× 10
711× 457.2
128
521470 394.60
× 12 × 508 8.5 483 398.20× 14 × 610 10.5 508 409.90
32× 8
813× 508
13.58.5
597533 495.00
× 10 × 610 10.5 559 506.80× 12 × 711 12 572 518.80
36× 10
914× 610
15.510.5
673610 723.60
× 12 × 711 12 622 735.40× 14 × 813 13.5 648 754.40
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
52
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
reduCINg teeS 20 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAMLESS1 × 3/4 30 × 25 2.5 2 38 38 0.17
1 1/4 × 3/4 38 × 25 2.5 2 48 48 0.28× 1 × 30 2.5 0.28
1 1/2× 3/4
44.5× 25
2.52
57 570.37
× 1 × 30 2.5 0.40× 1 1/4 × 38 2.5 0.41
2× 1
57× 30
2.52.5
6451 0.51
× 1 1/4 × 38 2.5 57 0.54× 1 1/2 × 44.5 2.5 60 0.55
2 1/2× 1 1/4
76.1× 38
2.52.5
7664 0.83
× 1 1/2 × 44.5 2.5 67 0.84× 2 × 57 2.5 70 0.85
3× 1 1/2
88.9× 44.5
2.52.5
8673 1.10
× 2 × 57 2.5 76 1.12× 2 1/2 × 76.1 2.5 83 1.15
4× 2
108× 57
32.5
10589 1.90
× 2 1/2 × 76.1 2.5 95 1.92× 3 × 88.9 2.5 98 1.95
6× 2 1/2
159× 76.1
3.52.5
143121 4.60
× 3 × 88.9 2.5 124 4.65× 4 × 108 3 130 4.72
8× 3
219.1× 88.9
4.52.5
178152 18.70
× 4 × 108 3 156 19.00× 6 × 159 3.5 168 19.10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
53
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
reduCINg teeS 20 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Amm
Cmm kg/piece
SEAM WELDED
10× 4
267× 108
5.53
216184 26.40
× 6 × 159 3.5 194 26.60× 8 × 219.1 4.5 203 26.75
12× 6
323.9× 159
73.5
254219 49.00
× 8 × 219.1 4.5 229 50.40× 10 × 267 5.5 241 51.80
14× 8
368× 219.1
84.5
279248 72.35
× 10 × 267 5.5 257 73.50× 12 × 323.9 7 270 75.70
16× 10
419.1× 267
95.5
305283 115.70
× 12 × 323.9 7 295 117.50× 14 × 368 8 305 120.20
18× 12
457.2× 323.9
9.57
343321 150.00
× 14 × 368 8 330 152.35× 16 × 419.1 9 330 154.25
20× 14
508× 368
118
381356 209.65
× 16 × 419.1 9 356 212.50× 18 × 457.2 9.5 368 217.80
24× 8
610× 419.1
139
432406 307.40
× 10 × 457.2 9.5 419 311.60× 12 × 508 11 432 310.10
28× 10
711× 457.2
159.5
521470 493.25
× 12 × 508 11 483 497.75× 14 × 610 13 508 512.40
32× 8
813× 508
1711
597533 623.30
× 10 × 610 13 559 638.20× 12 × 711 15 572 653.30
36× 10
914× 610
1913
673610 887.00
× 12 × 711 15 622 901.45× 14 × 813 17 648 924.75
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
54
Material : CuNi 90/10 dimension : DIN 86087
SAddleSwith equal or reduced branch
10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS1/2 × 1/2 20 × 20 1 1 20 32 0.05
3/4 × 1/2 25 × 20 1.5 1 20 40 0.05× 3/4 × 25 1.5 22 0.06
1 × 3/4 30 × 25 1.5 1.5 20 40 0.06× 1 × 30 1.5 30 50 0.10
1 1/4× 1
38× 30
1.51.5 30 50 0.10
× 1 1/4 × 38 1.5 35 64 0.11
1 1/2 × 1 1/4 44.5 × 38 1.5 1.5 35 64 0.14× 1 1/2 × 44.5 1.5 74 0.15
2× 1 1/4
57× 38
1.51.5 35 64 0.15
× 1 1/2 × 44.5 1.5 74 0.17× 2 × 57 1.5 40 97 0.25
2 1/2
× 1 1/4
76.1
× 38
2
1.5 35 64 0.30× 1 1/2 × 44.5 1.5 74 0.34× 2 × 57 1.5 40 97 0.48× 2 1/2 × 76.1 2 50 126 0.52
3
× 1 1/4
88.9
× 38
2
1.5 35 64 0.36× 1 1/2 × 44.5 1.5 74 0.44× 2 × 57 1.5 40 97 0.50× 2 1/2 × 76.1 2 50 126 0.56× 3 × 88.9 2 55 149 0.76
3
× 1 1/4
88.9
× 38
2.5
1.5 35 64 0.45× 1 1/2 × 44.5 1.5 74 0.55× 2 × 57 1.5 40 97 0.62× 2 1/2 × 76.1 2 50 126 0.70× 3 × 88.9 2.5 55 149 0.95
4
× 1 1/2
108
× 44.5
2.5
1.5 35 74 0.32× 2 × 57 1.5 40 97 0.40× 2 1/2 × 76.1 2 50 126 0.65× 3 × 88.9 2 55 149 0.79× 4 × 108 2.5 75 188 1.30
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
55
Material : CuNi 90/10 dimension : DIN 86087
SAddleSwith equal or reduced branch
10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS
5
× 2
133
× 57
2.5
1.5 40 97 0.40× 2 1/2 × 76.1 2 50 126 0.80× 3 × 88.9 2 55 149 1.00× 4 × 108 2.5 75 188 1.20× 5 × 133 2.5 85 233 1.70
5
× 2
133
× 57
3
1.5 40 97 0.48× 2 1/2 × 76.1 2 50 126 0.96× 3 × 88.9 2.5 55 149 1.20× 4 × 108 2.5 75 188 1.44× 5 × 133 3 85 233 2.04
6
× 2 1/2
159
× 76.1
2.5
2 50 126 0.65× 3 × 88.9 2 55 149 1.00× 4 × 108 2.5 75 188 1.20× 5 × 133 2.5 85 233 2.00× 6 × 159 2.5 95 279 2.60
6
× 2 1/2
159
× 76.1
3
2 50 126 0.78× 3 × 88.9 2.5 55 149 1.20× 4 × 108 2.5 75 188 1.44× 5 × 133 3 85 233 2.40× 6 × 159 3 95 279 3.12
7
× 2 1/2
193.7
× 76.1
3
2 50 126 0.95× 3 × 88.9 2 55 149 1.30× 4 × 108 2.5 75 188 1.40× 5 × 133 2.5 85 233 1.90× 6 × 159 2.5 95 279 2.50× 7 × 193.7 3 110 334 3.20
7
× 2 1/2
193.7
× 76.1
3.5
2.5 50 126 1.33× 3 × 88.9 2.5 55 149 1.82× 4 × 108 2.5 75 188 1.96× 5 × 133 3 85 233 2.66× 6 × 159 3 95 279 3.50
7 193.7 3.5 110 334 4.48
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
56
Material : CuNi 90/10 dimension : DIN 86087
SAddleSwith equal or reduced branch
10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS
8
× 3
219.1
× 88.9
3
2 55 149 1.30× 4 × 108 2.5 75 188 1.80× 5 × 133 2.5 85 233 2.70× 6 × 159 2.5 95 279 3.80× 7 × 193.7 3 110 334 4.50× 8 × 219.1 3 125 379 5.70
8
× 3
219.1
× 88.9
3.5
2.5 55 149 1.52× 4 × 108 2.5 75 188 2.10× 5 × 133 3 85 233 3.15× 6 × 159 3 95 279 4.43× 7 × 193.7 3.5 110 334 5.25× 8 × 219.1 3.5 125 379 6.65
10
× 4
267
× 108
3
2.5 75 188 1.80× 5 × 133 2.5 85 233 2.30× 6 × 159 2.5 95 279 3.70× 7 × 193.7 3 110 334 4.70× 8 × 219.1 3 125 379 6.10× 10 × 267 3 155 447 8.70
10
× 4
267
× 108
4
2.5 75 188 2.40× 5 × 133 3 85 233 3.06× 6 × 159 3 95 279 4.93× 7 × 193.7 3.5 110 334 6.27× 8 × 219.1 3.5 125 379 8.13× 10 × 267 4 155 447 11.60
12
× 5
323.9
× 133
4
2.5 85 233 2.60× 6 × 159 2.5 95 279 3.80× 7 × 193.7 3 110 334 4.90× 8 × 219.1 3 125 379 7.70× 10 × 267 3 155 447 10.00× 12 × 323.9 4 185 560 13.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
57
Material : CuNi 90/10 dimension : DIN 86087
SAddleSwith equal or reduced branch
10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAM WELDED
12
× 5
232.9
× 133
5
3 85 233 3.25× 6 × 159 3 95 279 4.75× 7 × 193.7 3.5 110 334 6.20× 8 × 219.1 3.5 125 379 9.60× 10 × 267 4 155 447 12.50× 12 × 323.9 5 185 560 16.25
14
× 6
368
× 159
4
2.5 95 279 3.85× 7 × 193.7 2.5 110 334 4.20× 8 × 219.1 3 125 379 4.35× 10 × 267 3 155 447 7.30× 12 × 323.9 4 185 560 9.45× 14 × 368 4 200 613 12.35
14
× 6
368
× 159
5.5
3 95 279 5.30× 7 × 193.7 3.5 110 334 5.80× 8 × 219.1 3.5 125 379 6.00× 10 × 267 4 155 447 10.00× 12 × 323.9 5 185 560 13.00× 14 × 368 5.5 200 613 17.00
16
× 8
419.1
× 219.1
4
3 125 379 4.35× 10 × 267 3 155 447 6.65× 12 × 323.9 4 185 560 9.35× 14 × 368 4 200 613 12.00× 16 × 419.1 4 225 680 17.35
16
× 8
419.1
× 219.1
6
3.5 125 379 6.50× 10 × 267 4 155 447 10.00× 12 × 323.9 5 185 560 14.00× 14 × 368 5.5 200 613 18.00× 16 × 419.1 6 225 680 26.00
18
× 10
457.2
× 267
4
3 155 447 6.30× 12 × 323.9 4 185 560 8.00× 14 × 368 4 200 613 9.70× 16 × 419.1 4 225 680 14.85× 18 × 457.2 4 250 800 21.70
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
58
Material : CuNi 90/10 dimension : DIN 86087
SAddleSwith equal or reduced branch
10 bAr and 14 Bar
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAM WELDED
18
× 10
457.2
× 267
6
4 155 447 9.45× 12 × 323.9 5 185 560 12.00× 14 × 368 5.5 200 613 14.60× 16 × 419.1 6 225 680 22.30× 18 × 457.2 6 250 800 32.60
20
× 12
508
× 323.9
4.5
4 185 560 9.00× 14 × 368 4 200 613 10.80× 16 × 419.1 4 225 680 16.80× 18 × 457.2 4 250 800 22.80× 20 × 508 4.5 275 880 28.80
20
× 12
508
× 323.9
6.5
5 185 560 13.00× 14 × 368 5.5 200 613 15.60× 16 × 419.1 6 225 680 24.30× 18 × 457.2 6 250 800 32.95× 20 × 508 6.5 275 880 41.60
24
× 14
610
× 368
5
4 200 613 11.10× 16 × 419.1 4 225 680 17.25× 18 × 457.2 4 250 800 22.80× 20 × 508 4.5 275 880 26.70× 24 × 610 5 300 1020 47.20
24
× 14
610
× 368
8
5.5 200 613 17.77× 16 × 419.1 6 225 680 27.55× 18 × 457.2 6 250 800 36.45× 20 × 508 6.5 275 880 42.65× 24 × 610 8 300 1020 75.50
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
59
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
SAddleSwith equal or reduced branch
16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS1 1/4 × 1 1/4 38 × 38 2.5 2.5 35 64 0.18
1 1/2 × 1 1/4 44.5 × 38 2.5 2.5 35 64 0.23× 1 1/2 × 44.5 2.5 74 0.25
2× 1 1/4
57× 38
2.52.5 35 64 0.25
× 1 1/2 × 44.5 2.5 74 0.28× 2 × 57 2.5 40 97 0.40
2 1/2
× 1 1/4
76.1
× 38
2.5
2.5 35 64 0.37× 1 1/2 × 44.5 2.5 74 0.42× 2 × 57 2.5 40 97 0.60× 2 1/2 × 76.1 2.5 50 126 0.65
3
× 1 1/4
88.9
× 38
2.5
2.5 35 64 0.45× 1 1/2 × 44.5 2.5 74 0.55× 2 × 57 2.5 40 97 0.62× 2 1/2 × 76.1 2.5 50 126 0.70× 3 × 88.9 2.5 55 149 0.95
4
× 1 1/2
108
× 44.5
3
2.5 35 74 0.38× 2 × 57 2.5 40 97 0.48× 2 1/2 × 76.1 2.5 50 126 0.78× 3 × 88.9 2.5 55 149 0.94× 4 × 108 3 75 188 1.56
6
× 2 1/2
159
× 76.1
3
2.5 50 126 0.78× 3 × 88.9 2.5 55 149 1.20× 4 × 108 3 75 188 1.44× 6 × 159 3 95 279 3.12
SEAMLESS or SEAM WELDED
8
× 3
219.1
× 88.9
4
2.5 55 149 1.73× 4 × 108 3 75 188 2.40× 6 × 159 3 95 279 5.06× 8 × 219.1 4 125 379 7.60
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
60
SAddleSwith equal or reduced branch
16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS or SEAM WELDED
10
× 4
267
× 108
4.5
3 75 188 2.70× 6 × 159 3 95 279 5.54× 8 × 219.1 4 125 379 9.14× 10 × 267 4.5 155 447 13.05
12
× 6
323.9
× 159
5.5
3 95 279 5.22× 8 × 219.1 4 125 379 10.58× 10 × 267 4.5 155 447 13.75× 12 × 323.9 5.5 185 560 17.87
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
61
SAddleSwith equal or reduced branch
16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAM WELDED8 × 8 219.1 × 219.1 4 4 125 379 5.70
10 × 8 267 × 219.1 4.5 4 125 379 6.75× 10 × 267 4.5 155 447 12.40
12× 8
323.9× 219.1
5.54 125 379 6.60
× 10 × 267 4.5 155 447 12.10× 12 × 323.9 5.5 185 560 15.40
14
× 8
368
× 219.1
6.5
4 125 379 7.10× 10 × 267 4.5 155 447 11.80× 12 × 323.9 5.5 185 560 15.40× 14 × 368 6.5 200 613 20.10
16
× 10
419.1
× 267
7
4.5 155 447 11.65× 12 × 323.9 5.5 185 560 16.35× 14 × 368 6.5 200 613 19.50× 16 × 419.1 7 225 680 28.20
18
× 12
457.2
× 323.9
8
5.5 185 560 16.00× 14 × 368 6.5 200 613 19.45× 16 × 419.1 7 225 680 29.70× 18 × 457.2 8 250 800 43.40
20
× 14
508
× 368
8.5
6.5 200 613 20.40× 16 × 419.1 7 225 680 31.75× 18 × 457.2 8 250 800 43.10× 20 × 508 8.5 275 880 54.40
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
62
SAddleSwith equal or reduced branch
16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAM WELDED
24
× 16
610
× 419.1
10.5
7 225 680 36.15× 18 × 457.2 8 250 800 47.85× 20 × 508 8.5 275 880 56.00× 24 × 610 10.5 300 1020 99.20
28
× 18
711
× 457.2
12
8 250 800 77.70× 20 × 508 8.5 275 880 105.10× 24 × 610 10.5 300 1020 137.15× 28 × 711 12 360 1225 182.85
32
× 20
813
× 508
13.5
8.5 275 880 118.10× 24 × 610 10.5 300 1020 163.15× 28 × 711 12.5 360 1225 208.15× 32 × 813 13.5 410 1400 225.00
36
× 24
914
× 610
15.5
10.5 300 1020 206.70× 28 × 711 12.5 360 1225 246.85× 32 × 813 13.5 410 1400 294.45× 36 × 914 15.5 460 1550 357.00
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
63
SAddleSwith equal or reduced branch
20 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS1 1/4 × 1 1/4 38 × 38 2.5 2.5 35 64 0.18
1 1/2 × 1 1/4 44.5 × 38 2.5 2.5 35 64 0.23× 1 1/2 × 44.5 2.5 74 0.25
2× 1 1/4
57× 38
2.52.5 35 64 0.25
× 1 1/2 × 44.5 2.5 74 0.28× 2 × 57 2.5 40 97 0.40
2 1/2
× 1 1/4
76.1
× 38
2.5
2.5 35 64 0.37× 1 1/2 × 44.5 2.5 74 0.42× 2 × 57 2.5 40 97 0.60× 2 1/2 × 76.1 2.5 50 126 0.65
3
× 1 1/4
88.9
× 38
2.5
2.5 35 64 0.45× 1 1/2 × 44.5 2.5 74 0.55× 2 × 57 2.5 40 97 0.62× 2 1/2 × 76.1 2.5 50 126 0.70× 3 × 88.9 2.5 55 149 0.95
4
× 1 1/2
108
× 44.5
3
2.5 35 74 0.38× 2 × 57 2.5 40 97 0.45× 2 1/2 × 76.1 2.5 50 126 0.78× 3 × 88.9 2.5 55 149 0.94× 4 × 108 3 75 188 1.56
6
× 2 1/2
159
× 76.1
3.5
2.5 50 126 0.91× 3 × 88.9 2.5 55 149 1.40× 4 × 108 3 75 188 1.68× 6 × 159 3.5 95 279 3.64
SEAMLESS or SEAM WELDED
8
× 3
219.1
× 88.9
4.5
2.5 55 149 1.94× 4 × 108 3 75 188 2.70× 6 × 159 3.5 95 279 5.69× 8 × 219.1 4.5 125 379 8.55
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
64
SAddleSwith equal or reduced branch
20 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAMLESS or SEAM WELDED
10
× 4
267
× 108
5.5
3 75 188 3.30× 6 × 159 3.5 95 279 6.77× 8 × 219.1 4.5 125 379 11.17× 10 × 267 5.5 155 447 15.95
12
× 6
323.9
× 159
7
3.5 95 279 6.64× 8 × 219.1 4.5 125 379 13.46× 10 × 267 5.5 155 447 17.50× 12 × 323.9 7 185 560 22.74
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
65
SAddleSwith equal or reduced branch
16 bAr
outside diameter wall thickness Center to face Theoretical
weightØd × Ød Ød × Ødnominal
inchactualmm
emm
emm
Hmm
Amm kg/piece
SEAM WELDED8 × 8 219.1 × 219.1 4.5 4.5 125 379 6.40
10 × 8 267 × 219.1 5.5 4.5 125 379 8.25× 10 × 267 5.5 155 447 15.15
12× 8
323.9× 219.1
74.5 125 379 8.40
× 10 × 267 5.5 155 447 15.40× 12 × 323.9 7 185 560 19.60
14
× 8
368
× 219.1
8
4.5 125 379 8.75× 10 × 267 5.5 155 447 14.55× 12 × 323.9 7 185 560 18.95× 14 × 368 8 200 613 24.75
16
× 10
419.1
× 267
9
5.5 155 447 15.00× 12 × 323.9 7 185 560 21.00× 14 × 368 8 200 613 25.10× 16 × 419.1 9 225 680 36.25
18
× 12
457.2
× 323.9
9.5
7 185 560 19.00× 14 × 368 8 200 613 23.10× 16 × 419.1 9 225 680 35.25× 18 × 457.2 9.5 250 800 51.55
20
× 14
508
× 368
11
8 200 613 26.40× 16 × 419.1 9 225 680 41.10× 18 × 457.2 9.5 250 800 55.80× 20 × 508 11 275 880 70.40
24
× 16
610
× 419.1
13
9 225 680 44.75× 18 × 457.2 9.5 250 800 59.25× 20 × 508 11 275 880 69.30× 24 × 610 13 300 1020 122.80
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
66
Material : CuNi 90/10 dimension : DIN 28011
eNd CApS 10 bAr and 14 Bar
outside diameter of pipes Ød wall thickness Height Theoretical weight
nomialinch
actualmm
e mm
h1mm
h2mm kg/piece
SeAMleSS1 30 1.5
145 0.07
1 1/4 38 1.5 6.5 0.101 1/2 44.5 1.5 8 0.12
2 57 1.518
10 0.182 1/2 76.1 2 14 0.31
3 88.9 2
20
160.39
3 88.9 2.5 0.534 108 2.5 20 0.755 133 2.5
240.95
5 133 3 1.206 159 2.5
291.35
6 159 3 1.607 193.7 3
361.95
7 193.7 3.5 2.408 219.1 3
412.60
8 219.1 3.5 3.1010 267 3
503.85
10 267 4 4.8512 323.9 4
616.60
12 323.9 5 8.2014 368 4
698.80
14 368 5.5 12.6016 419.1 4
7912.20
16 419.1 6 25 17.4018 457.2 4 20
8712.55
18 457.2 6 25 17.9020 508 4.5 20
9618.80
20 508 6.5 25 26.3524 610 5 20
11526.70
24 610 8 35 49.60
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
67
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
eNd CApS 16 bAr
outside diameter of pipes Ød wall thickness Height Theoretical weight
nomialinch
actualmm
e mm
h1 + h2mm kg/piece
SeAMleSS1 1/2 44.5
2.5
19.6 0.132 57 22 0.19
2 1/2 76.1 25.7 0.313 88.9 28.2 0.404 108
331.7 0.75
6 159 41 1.508 219.1 4 55 2.75
10 267 4.5 69 4.9012 323.9 5.5 80 9.1714 368 6.5 93 14.0516 419.1 7 102 18.6018 457.2 8 119 22.7520 508 8.5 129 31.7024 610 10.5 148 56.1628 711 12 176 85.5532 813 13.5 200 125.4036 914 15.5 221 175.40
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
68
eNd CApS 20 bAr
outside diameter of pipes Ød wall thickness Height Theoretical weight
nomialinch
actualmm
e mm
h1 + h2mm kg/piece
SeAMleSS1 1/2 44.5
2.5
19.6 0.132 57 22 0.19
2 1/2 76.1 25.7 0.313 88.9 28.2 0.404 108 3 31.7 0.756 159 3.5 44 1.758 219.1 4.5 60 3.10
10 267 5.5 69 5.9612 323.9 7 85 11.6814 368 8 103 17.3016 419.1 9 112 23.9018 457.2 9.5 119 27.0020 508 11 139 41.0024 610 13 163 68.3028 711 15 191 106.9032 813 17 210 157.9036 914 19 231 215.00
Material : CuNi 90/10 dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
69
Flan
ges
Flanges
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
70
Composite Weld Neck FlangesInner Flanges (DIN)
Composite Weld Neck FlangesInner Flanges (Short type EEMUA)
Composite Weld Neck FlangesInner Flanges (Long type EEMUA)
Composite Weld Neck FlangesOuter Flanges (ISO)
Composite Weld Neck FlangesOuter Flanges (EEMUA)
Composite Weld Neck FlangesOuter Flanges (ANSI)
Composite blind Flanges(ISO, ANSI)
Solid Welding Neck Flanges(DIN)
Solid Weld Neck Flanges(EEMUA, ANSI)
Solid Slip On Flanges(DIN, ANSI)
Solid Slip On Flanges(EEMUA)
Solid Blind Flanges(ISO, ANSI)
Flanges
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
71
Material : CuNi 90/10 dimension : DIN 86037
CoMpoSIte weld NeCK flANgeSInner flanges
10 bAr and 14 Bar
outside diameter of pipesØd wall thickness ØA H C Øx r1 Theo. weight
nomial inch
actualmm
emm mm mm mm mm mm kg/piece
3/4 25
1.5
5840 5
27 3 0.171 30 68 32
40.24
1 1/4 38 78 40 0.261 1/2 44.5 88
45 646.5 0.42
2 57 102 59
5
0.532 1/2 76.1
2122 78 0.64
3 88.9 138
50
7
910.86
2.5 0.904 108
2.5158 110 1.10
5 133 188 135.51.50
3 1.55
6 1592.5
212
9
161.52.00
3 2.10
7 193.73
242 1972.30
3.5 2.55
8 219.13
268 2222.70
3.5 2.90
10 2673
320 2703.40
4 3.80
12 323.94
37011
327
7
4.60 5 5.40
14 3684
430 3716.20
5.5 6.95
16 419.14
482
12
4227.50
6 8.65
18 457.24
530 4609.00
6 10.15
20 5084.5
585 51110.65
6.5 11.90
25 6105
685 60 14 613 914.90
8 17.65
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
72
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
CoMpoSIte weld NeCK flANgeSShort inner flanges type eeMuA
16 bAr
outside diameter of pipesØd
wall thick-ness ØA H C Øx r1 Theo.
weight
nomial inch
actualmm
emm mm mm mm mm mm kg/piece
1/2 162
40 35 4 18 2 0.073/4 25 50
40 527 3 0.16
1 30
2.5
60 324
0.201 1/4 38 70 40 0.251 1/2 44.5 80
50
646.5 0.42
2 57 99 59
5
0.502 1/2 76.1 120 78 0.67
3 88.9 1307
91 0.864 108
3158 110 1.18
6 159 2129
161.5 2.208 219.1 4 270 222 3.20
10 267 4.5 320 270 3.9012 323.9 5.5 370
11327
7
6.5014 368 6.5 430 371 7.4516 419.1 7 482
12422 9.20
18 457.2 8 530 460 11.4520 508 8.5 585 511 13.4024 610 10.5 685
60
14 613
9
20.7528 711 12 800 19 719 33.3532 813 13.5 905 20.5 821 42.2536 914 15.5 1000 22 922 49.35
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
73
CoMpoSIte weld NeCK flANgeSShort inner flanges type eeMuA
20 bAr
outside diameter of pipesØd
wall thick-ness ØA H C Øx r1 Theo.
weight
nomial inch
actualmm
emm mm mm mm mm mm kg/piece
1/2 162
40 35 4 18 2 0.073/4 25 50
40 527 3 0.16
1 30
2.5
60 324
0.201 1/4 38 70 40 0.251 1/2 44.5 80
45 646.5 0.42
2 57 99 59
5
0.502 1/2 76.1 120 78 0.67
3 88.9 130
50
791 0.86
4 1083
158 110 1.206 159 212
9161.5 2.20
8 219.1 4 270 222 3.3010 267 4.5 320 270 4.2012 323.9 5.5 370
11327
7
6.8014 368 6.5 430 371 8.2016 419.1 7 482
12422 10.35
18 457.2 8 530 460 12.4020 508 8.5 585 511 15.1024 610 10.5 685
60
14 613
9
23.2528 711 12 800 19 719 36.8032 813 13.5 905 20.5 821 46.8536 914 15.5 1000 22 922 54.55
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
74
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
CoMpoSIte weld NeCK flANgeSlong inner flanges type eeMuA
16 bAr
outside diameter of pipesØd wall thickness ØA H C Øx r1 Theo. weight
nomial inch
actualmm
emm mm mm mm mm mm kg/piece
1/2 162
40
51
4 18 2 0.093/4 25 50
527 3 0.19
1 30
2.5
60 324
0.231 1/4 38 70 40 0.291 1/2 44.5 80
646.5 0.44
2 57 9964
59
5
0.612 1/2 76.1 120 78 0.80
3 88.9 1307
91 0.974 108
3158 76 110 1.50
6 159 212 899
161.5 2.908 219.1 4 270 102 222 5.10
10 267 4.5 320 127 270 8.9012 323.9 5.5 370
152
11327
7
13.8014 368 6.5 430 371 16.6016 419.1 7 482
12422 20.25
18 457.2 8 530 460 23.6020 508 8.5 585 511 28.6524 610 10.5 685 14 613
9
39.2528 711 12 800
19019 719 75.30
32 813 13.5 905 20.5 821 94.6036 914 15.5 1000 22 922 115.55
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
75
CoMpoSIte weld NeCK flANgeSlong inner flanges type eeMuA
20 bAr
outside diameter of pipesØd wall thickness ØA H C Øx r1 Theo. weight
nomial inch
actualmm
emm mm mm mm mm mm kg/piece
1/2 162
40
51
4 18 2 0.093/4 25 50
527 3 0.19
1 30
2.5
60 324
0.231 1/4 38 70 40 0.291 1/2 44.5 80
646.5 0.44
2 57 9964
59
5
0.612 1/2 76.1 120 78 0.80
3 88.9 1307
91 0.974 108 3 158 76 110 1.506 159 3.5 212 89
9161.5 2.90
8 219.1 4.5 270 102 222 5.2010 267 5.5 320 127 270 9.8012 323.9 7 370
152
11327
7
15.4014 368 8 430 371 19.0016 419.1 7 482
12422 23.95
18 457.2 9 530 460 26.4020 508 11 585 511 33.8524 610 13 685 14 613
9
45.5028 711 15 800
19019 719 86.20
32 813 17 905 20.5 821 100.1536 914 19 1000 22 922 131.95
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
76
Material : CuNi 90/10 dimension : ISO NP10 - DIN 86037
CoMpoSIte weld NeCK flANgeSouter flanges
10 bAr
outside diameter of pipes Ød ØA C Øb f
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm mm kg/piece
3/4 25 105 14 28 3 75
4
140.80
1 30 115
16
334
85 1.101 1/4 38 140 42 100
18
1.651 1/2 44.5 150 50 110 1.85
2 57 165 62
5
125 2.202 1/2 76.1 185 81 145 2.65
3 88.9 200
18
94 160
8
3.304 108 220 113 180 3.655 133 250 138 210 4.556 159 285 164 240
22
5.607 193.7 315 22 200 270 7.508 219.1 340 20 225 295 7.45
10 267 395 22 273 35012
10.3012 323.9 445
24331
7
400 12.0014 368 505 375 460
1616.00
16 419.1 565 26 426 51526
20.0018 457.2 615 28 465 565
2025.00
20 508 670 30 517 620 31.0024 610 780 32 618 9 725 30 40.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
77
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
CoMpoSIte weld NeCK flANgeSouter flanges
150 lbS
outside diameter of pipes Ød ØA C Øb f
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm mm kg/piece
1/2 16 89
14
19 2 60.3
4
15.9
0.603/4 25 98 28
3
69.8 0.801 30 108 33 79.4 0.90
1 1/4 38 117 41 88.9 1.101 1/2 44.5 127 48 98.4 1.20
2 57 15218
62 120.6
19.0
2.102 1/2 76.1 178 81 139.7 2.60
3 88.9 190 19 94 152.4 2.904 108 229 24 113 190.4
85.90
6 159 279 27 164 4 241.322.2
8.408 219.1 343 31 225
5298.4 12.35
10 267 406 38 279 362.012
25.419.70
12 323.9 483 41 330
7
431.8 32.2014 368 533 45 374 476.2
28.638.20
16 419.1 597 51 426 539.816
52.1518 457.2 635 52 465 577.8
31.854.05
20 508 698 58 517 635.020
73.2024 610 813 71 618
9
749.334.9
114.2528 711 927 81 727 864.0
28151.80
32 813 1060 95 829 978.041.1
233.5036 914 1168 105 931 1086.0 32 294.10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
78
Material : CuNi 90/10 dimension : ANSI B16.5
CoMpoSIte weld NeCK flANgeSouter flanges
150 lbS
outside diameter of pipes Ød ØA H C Øx Øb r
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm mm mm mm kg/piece
1/2 20 88.915.9
11.1 30.2 223.2
60.3
4
15.9
0.803/4 25 98.4 12.7 38.1 28 69.8 0.901 30 107.9 17.5 14.3 49.2 33 79.4 1.00
1 1/4 38 117.9 20.6 15.9 58.8 41 4.8 88.9 1.301 1/2 44.5 127.0 22.2 17.5 65.1 48 6.4 98.4 1.40
2 57 152.4 25.4 19.0 77.8 627.9
120.6
19.0
2.302 1/2 76.1 177.8 28.6 22.2 90.5 81 139.7 3.20
3 88.9 190.5 30.223.8
107.9 94 9.5 152.4 3.604 108 228.6 33.3 134.9 113
11.1190.5
8
5.905 133 254.0 36.5 163.5 138 215.9
22.26.80
6 159 279.4 39.7 25.4 192.1 164
12.70
241.3 8.608 219.1 342.9 44.4 28.6 246.1 225 298.4 13.60
10 267 406.4 49.2 30.2 304.8 273 361.912
25.416.50
12 323.9 482.6 55.6 31.7 365.1 330 431.8 29.0014 368 533.4 79.4 34.9 400.0 374 476.2
28.645.00
16 419.1 596.9 87.3 36.5 457.2 426 539.716
58.0018 457.2 635.0 96.8 39.7 504.8 465 577.8
31.766.00
20 508 698.5 103.2 42.9 558.8 517 635.020
84.0024 610 812.8 111.1 47.6 663.6 618 749.3 34.9 118.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
79
CoMpoSIte weld NeCK flANgeSouter flanges
300 lbS
outside diameter of pipes Ød ØA H C Øx Øb r
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm mm mm mm kg/piece
1/2 20 95.2 22.2 14.3 38.1 223.2
66.7
4
15.9 1.203/4 25 117.5 25.4 15.9 47.6 28 82.5
19.01.30
1 30 123.827.0
17.5 54.0 33 88.9 1.401 1/4 38 133.3 19.0 63.5 41 4.8 98.4 1.801 1/2 44.5 155.6 30.2 20.6 69.8 48 6.4 114.3 22.2 2.70
2 57 165.1 33.3 22.2 84.1 627.9
127.0
8
19.0 3.202 1/2 76.1 190.5 38.1 25.4 100.0 81 149.2
22.2
4.503 88.9 209.5 42.9 28.6 117.5 94 9.5 168.3 5.904 108 254.0 47.6 31.7 146.0 113
11.1200.0 10.00
5 133 279.4 50.8 34.9 177.8 138 234.9 12.706 159 317.5 52.4 36.5 206.4 164
12.7
269.912
17.708 219.1 381.0 61.9 41.3 260.3 225 330.2 25.4 26.30
10 267 444.5 95.2 47.6 320.7 273 387.316
28.6 41.0012 323.9 520.7 101.6 50.8 374.6 330 450.8
31.763.00
14 368 584.2 111.1 54.0 425.4 374 514.320
86.0016 419.1 647.7 120.6 57.1 482.6 426 571.5
34.9109.00
18 457.2 711.2 130.2 60.3 533.4 465 628.624
138.0020 508 774.7 139.7 63.5 587.4 517 685.8 170.0024 610 914.4 152.4 69.8 701.7 618 812.8 41.3 241.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Material : CuNi 90/10 dimension : ANSI B16.5
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
80
dISCS:Material : CuNi 90/10
FLANGES:Material : Carbon steel A105(Galvanised or epoxy coated upon request)
dimension : ISO NP 10
CoMpoSIte blINd flANgeSouter flanges
10 bAr
outside diameter of pipes Ød ØA C Ør
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm kg/piece
1/2 20 95 14 46 65
4
140.78
3/4 25 10516
56 75 1.151 30 115 65 85 1.40
1 1/4 38 14018
76 100
18
2.001 1/2 44.5 150 84 110 2.35
2 57 16520
99 125 3.202 1/2 76.1 185 118 145 4.15
3 88.9 200 132 160
8
5.704 108 220
22156 180 7.05
5 133 250 184 210
22
10.056 159 285
24211 240 13.00
7 193.7 315 242 270 18.008 219.1 340 266 295 20.80
10 267 39526
319 35012
29.6512 323.9 445 370 400 38.7014 368 505 429 460
1653.55
16 419.1 56528
480 51526
69.4518 457.2 615 530 565
2082.40
20 508 670 30 582 620 104.7024 610 780 34 682 725 30 149.75
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
81
dISCS:Material : CuNi 90/10
FLANGES:Material : Carbon steel A105(Galvanised or epoxy coated upon request)
dimension : ANSI B16.5
CoMpoSIte blINd flANgeS 150 lbS
outside diameter of pipes Ød ØA C Ør
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm kg/piece
1/2 20 88.9 12.5 34.9 60.3
415.9
0.803/4 25 98.4 14.1 42.9 69.8 0.901 30 108.0 15.7 50.8 79.4 1.00
1 1/4 38 117.5 17.3 63.5 88.9 1.301 1/2 44.5 127.0 20.5 73.0 98.4 1.40
2 57 152.4 22.5 92.1 120.6
19
1.802 1/2 76.1 177.8 23.7 104.8 139.7 3.20
3 88.9 190.525.2
127.0 152.4
8
4.004 108 228.6 157.2 190.5 8.005 133 254.0 185.7 215.9
22.29.00
6 159 279.4 26.8 215.9 241.3 12.008 219.1 342.9 30.0 269.9 298.4 20.00
10 267 406.4 31.6 323.8 361.912
25.432.00
12 323.9 482.6 33.2 381.0 431.8 50.0014 368 533.4 36.3 425.1 476.2
28.659.00
16 419.1 596.9 37.9 482.6 539.716
77.0018 457.2 635.0 41.1 533.4 577.8
31.795.00
20 508 698.5 44.3 584.2 635.020
123.0024 610 812.8 49.0 692.1 749.3 34.9 186.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
82
dISCS:Material : CuNi 90/10
FLANGES:Material : Carbon steel A105(Galvanised or epoxy coated upon request)
dimension : ANSI B16.5
CoMpoSIte blINd flANgeS 300 lbS
outside diameter of pipes Ød ØA C Ør
drilling Theo. weightØg N Ød
nomial inch
actualmm mm mm mm mm mm mm kg/piece
1/2 20 95.2 15.6 34.9 66.7
4
15.9 1.003/4 25 117.5 17.3 42.9 82.5
191.50
1 30 123.8 18.9 50.8 88.9 2.001 1/4 38 133.3 20.4 63.5 98.4 2.501 1/2 44.5 155.6 22.0 73.0 114.3 22.2 3.00
2 57 165.1 23.6 92.1 127.0
8
19 3.502 1/2 76.1 190.5 26.8 104.8 149.2
22.2
5.503 88.9 209.5 30.0 127.0 168.3 7.004 108 254.0 33.2 157.2 200.0 12.005 133 279.4 36.3 185.7 234.9 16.006 159 317.5 37.9 215.9 269.9
1223.00
8 219.1 381.0 42.7 269.9 330.2 25.4 36.5010 267 444.5 49.0 323.8 387.3
1628.6 57.50
12 323.9 520.7 52.2 381.0 450.831.7
83.0014 368 584.2 55.4 425.1 514.3
20107.00
16 419.1 647.7 58.6 482.6 571.534.9
139.0018 457.2 711.2 61.7 533.4 628.6
24177.00
20 508 774.7 64.9 584.2 685.8 223.0024 610 914.4 71.2 692.1 812.8 41.3 342.00
* other dimensions, wall thicknesses and outside diameters are also available upon request.
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
83
Material : CuNi 90/10
SolId weldINg NeCK flANgeS 10&16 bAr
Np 10 Dimension: DIN 2632outside diameter
of pipes Ød ØA H C Øx Ør f e Y drilling Theo.weightØg N Ød
nominalinch
actualmm mm mm mm mm mm mm mm mm mm bolt
holes mm kg/piece
Nd 1/2 to 7 welding neck flanges as per dIN 2633. Np 16 are to be used.8 219.1 340 62 24 235 268
3To
be
spec
ified
by
pur
chas
er16
295 8
22
12.8410 267 395
6826
285 320 35012
16.7012 323.9 445 344 370
4
400 19.7714 368 505 385 430 460
1626.81
16 419.1 565 72 440 482 51526
32.4920 508 670 75
28542 585 620
2043.28
24 610 780 80 642 685 5 18 725 30 50.67
Np 16 Dimension: DIN 2633outside diameter
of pipes Ød ØA H C Øx Ør f e H1 drilling Theo.weightØg N Ød
nominalinch
actualmm mm mm mm mm mm mm mm mm mm bolt
holes mm kg/piece
1/2 20 95 35 14 30 45
2 6
65
4
140.74
3/4 25 105 3816
38 58 75 1.081 30 115 42 68 85 1.30
1 1/4 38 140 40 52 78 100
18
1.921 1/2 44.5 150 42 60 88
3
7 110 2.112 57 165 45 18 72 102 8 125 2.88
2 1/2 76.1 185 90 122 10 145 3.483 88.9 200 50 20 105 138 160
8
4.204 108 220 52 125 158
12
180 5.255 133 250 55 22 150 188 210 7.156 159 285 175 212 240
228.80
7 193.7 315 60 24 210 242 270 11.198 219.1 340 62 235 268
16
29512
12.5010 267 405 70 26 285 320 355
2617.72
12 323.9 460 78 28 344 378
4
410 25.0014 368 520 82 30 390 438 470 16 35.4516 419.1 580 85 32 445 490 525 30 45.2120 508 715 90 34 548 610 650 20 33 69.3024 610 840 95 36 652 725 5 18 770 36 85.65
* other dimensions, wall thicknesses and outside diameters are also available upon request.
To b
e sp
ecifi
ed
by p
urch
aser
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
84
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
SolId weldINg NeCK flANgeS 16 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
85
Material : CuNi 90/10 dimension : EMMUA Pub. N° 145
SolId weldINg NeCK flANgeS 20 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
86
Material : CuNi 90/10 dimension : ANSI B16.5
SolId weldINg NeCK flANgeS 150 lbS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
87
Material : CuNi 90/10 dimension : ANSI B16.5
SolId weldINg NeCK flANgeS 300 lbS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
88
Material : CuNi 90/10 Fe1Mn alloy UNS C70600 CuNi 30Mn1Fe alloy UNS C71500dimension : DIN 86033
SolId SlIp oN flANgeS 10 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
89
Material : CuNi 90/10 Fe1Mn alloy UNS C70600 CuNi 30Mn1Fe alloy UNS C71500dimension : EMMUA Pub. N° 145
SolId SlIp oN flANgeS 16&20 bAr
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
90
Material : CuNi 90/10dimension : ASNI B16.5
SolId SlIp oN flANgeS 150 lbS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
91
Material : CuNi 90/10dimension : ASNI B16.5
SolId SlIp oN flANgeS 300 lbS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
92
Material : CuNi 90/10dimension : ASNI B16.5
SolId SlIp oN flANgeS 300 lbS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
93
Material : CuNi 90/10dimension : ASNI B16.5
SolId SlIp oN flANgeS 300 lbS
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
94
Mac
hine
d Fi
tting
s
Machined Fittings
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
95
Machined Fittings
Elbows 45°Socket welding or capillary ends
Elbows 90°Socket welding or capillary ends
Equal TeesSocket welding or capillary ends
Reducing TeesSocket welding or capillary ends
Straight CouplingsSocket welding or capillary ends
Half CouplingsSocket welding or capillary ends
Reducing CouplingsSocket welding or capillary ends
CouplingsThreaded
Half CouplingsThreaded
Reducing InsertsSW or capillary ends × male ends
Reducing InsertsMale × SW or capillary ends
Union ConnectorsSocket welding or capillary ends
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
96
Machined Fittings
Union ConnectorsButt welding ends
Male Union ConnectorsSW or capillary ends × male thread
Male Union ConnectorsButt welding ends × male thread
Female Union ConnectorsSW or capillary ends × female thread
Female Union ConnectorsButt welding ends × female thread
Straight ConnectorsSW or capillary ends × male thread
Straight ConnectorsSW or capillary ends × female thread
Male AdaptorsButt welding ends × male thread
Female AdaptorsButt welding ends × female thread
Sprinkler Bushes Male Plug End CapsSocket welding or capillary ends
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
97
Machined Fittings
End CapsThreaded
Hexagonal NipplesThreaded
Pipe NipplesThreaded
Weldolets Sockolets Threadolets
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
98
elbowS SoCKet weldINg or CApIllArY eNdS
Material : CuNi 90/10
elbows 45°
elbows 90°
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
99
eQuAl teeS SoCKet weldINg or CApIllArY eNdS
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
100
reduCINg teeS SoCKet weldINg or CApIllArY eNdS
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
101
CouplINgS SoCKet weldINg or CApIllArY eNdS
Material : CuNi 90/10
Straight couplings
Half couplings
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
102
reduCINgCouplINgS
SoCKet weldINg or CApIllArY eNdS
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
103
CouplINgS tHreAded
Material : CuNi 90/10
Straight couplings
Half couplings
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
104
reduCINg INSertSCapillary x male ends
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
105
reduCINg INSertSMale x Capillary ends
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
106
uNIoN CoNNeCtorS
Material : CuNi 90/10
Socket welding or capillary ends
butt welding ends
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
107
MAle uNIoN CoNNeCtorS
Material : CuNi 90/10
Socket welding or capillary ends × Male
butt welding ends × Male
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
108
feMAle uNIoN CoNNeCtorS
Material : CuNi 90/10
Socket welding or capillary ends × female
butt welding ends × female
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
109
StrAIgHt CoNNeCtorSSocket welding or capillary end × Male thread
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
110
StrAIgHt CoNNeCtorSSocket welding or capillary end × female thread
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
111
AdAptorS
Material : CuNi 90/10
butt welding ends × Male thread
butt welding ends × female thread
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
112
SprINKler buSHeS & MAle plugS
Material : CuNi 90/10
Sprinkler bushes
Male plugs
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
113
eNd CApS
Socket welding or capillary ends
female threadedDimension: EMMUA Pub. N° 146
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
114
NIppleS tHreAded
Hexagonal nipples
pipe nipples
Material : CuNi 90/10
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
115
weldoletS 16&20 bAr
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
116
SoCKoletS 16&20 bAr
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
117
tHreAdoletS 16&20 bAr
Material : CuNi 90/10dimension : EMMUA Pub. N° 146
Specialising in Cupro Nickel, Copper & Copper Alloys.
www.smicopper.com
HeAd offICe
Office No.25, Ground Floor, 8, Radha Krishna Building, 4th Khetwadi Lane, Mumbai - 400004, India
wAreHouSe
Shop No.4 Dinanath Building, 254/264, Pathe Bapurao Marg, Mumbai - 400004, India
fACtorY
Sanchore Road, Near Saras Dairy, Raniwara - 343040, Rajasthan, India
CoNtACt uS
+91-22-23881515 / [email protected] / www.smicopper.com