Solberg-Filter Assemblies-FA160

Visit Solberg on the Web: WWW.SOLBERGMFG.COM

SOLBERG ®

FILTER A

SSEMB

LIES F, FT, SpinM

eister Series

INLET FILTER ASSEMBLIES/

EXPOSED FILTERS

Bulletin FA-160

TABLE OF CONTENTS Filter Assemblies: Durable weatherproof housings and ample surface area provide long lasting filtration. Industrial, Severe & Extreme duty models in stock. Stainless Steel filters available. ● F Series: Small Compact 1/2” to 3” MPT pg. 2 Compact 3” to 6” MPT pg. 3 4” to 6” FLG pg. 4 Big Boy 8” to 14” FLG pg. 5 Exposed/Open Filters: Very cost effective filtration solution. Element is exposed for optimal airflow and minimal pressure drop. Industrial, Severe & Extreme duty models in stock. Stainless Steel filters available. ● FT Series: Small Compact 1/2” to 3” MPT pg. 6 Compact 3” to 6” MPT pg. 7 4” to 6” FLG pg. 8 Big Boy 8” to 14” FLG pg. 9 SpinMeister™ Extreme Duty Filter Assemblies: Ideal for highly dirty areas when a precleaner is combined with an inlet filter. ● SM Series pg. 10 Replacement Parts/Accessories pg. 11 Replacement Filter Elements pg. 12

Discover the Possibilities

®

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727

E-mail: [email protected] Web Site: www.solbergmfg.com Solberg – Discover the Possibilities

Note: Model offerings and design parameters may change without notice.

Rated Flow SCFMwith with DIMENSIONS - inches Screw,

Polyester Paper MPT Blower, Element Approx.Element Element Outlet A B C Piston Fan Rating Wt. lbs

I F-15-050 F-14-050 1/2" 4 1 1/2 6 10 10 35 1.5I F-15-075 F-14-075 3/4" 4 1 1/2 6 20 25 35 1.7I F-15-100 F-14-100 1" 4 1 1/2 6 25 35 35 2S F-19P-100 F-18P-100 1" 6 5/8 1 5/8 6 35 55 100 3I F-19P-125 F-18P-125 1 1/4" 6 5/8 1 5/8 6 55 70 100 3I F-19P-150 F-18P-150 1 1/2" 6 5/8 1 5/8 6 70 85 100 3I F-31P-200 F-30P-200 2" 7 1/4 2 1/4 7 3/4 85 135 195 4.7S F-231P-200 F-230P-200 2" 12 1/4 2 1/4 10 135 135 300 12I F-31-250 F-30-250 2 1/2" 7 1/2 2 1/2 7 3/4 100 195 195 5.5S F-231P-250 F-230P-250 2 1/2” 12 1/2 2 1/2 10 195 195 300 13I F-231P-300 F-230P-300 3” 13 3 10 300 300 300 14

F14-306 pg. 2

Dimension tolerance + 1/4”

Industrial & Severe Duty Piston Compressors Screw Compressors Blowers - Side Channel & P.D. Hydraulic Breathers – fine filtration

1/8” tap holes Pressure Drop Indicator

Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Fully drawn weatherhood - no welds to rust or vibrate apart Low entry velocity air gap between base and cover Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop outlet

pipe design Durable carbon steel construction with baked enamel

finish and powder coated weatherhood

Engines Construction\Contractor Industry Workshop Medical\Dental Industry Pneumatic Conveying

Waste Water Aeration Sparging

Interchangeable media: Polyester, Paper, HEPA Several element sizes available per given connection

(safety factor) Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request

Available in Stainless Steel Epoxy coated housings

Small Compact Inlet Filters "F" Series 1/2” - 3” MPT

Various media available Special connections, BSPT

I = Industrial Duty S = Severe Duty

FILT

ER A

SSEM

BLI

ES

F, F

T, S

pinM

eist

er S

erie

s

APPLICATIONS & EQUIPMENT

FEATURES & SPECIFICATIONS

OPTIONS (Inquiries Encouraged)

CONFIGURATION DRAWING

®






S F-235P-300 F-234P-300 3" 13 3 10 300 300 570 15S F-245P-300 F-244P-300 3" 13 3 16 300 300 880 21E F-275P-300 F-274P-300 3" 13 3 16 300 300 1100 24I F-235P-400 F-234P-400 4" 14 4 10 300 520 570 15S F-245P-400 F-244P-400 4" 14 4 16 450 520 880 22E F-275P-400 F-274P-400 4" 14 4 16 450 520 1100 26I F-245P-500 F-244P-500 5" 14 4 16 500 800 880 23S F-275P-500 F-274P-500 5" 14 4 16 650 800 1100 27I F-275P-600 F-274P-600 6" 15 5 16 650 1100 1100 29

F24-306 pg. 3


Industrial & Severe Duty Blowers - Side Channel & P.D. Piston Compressors Screw Compressors Hydraulic Breathers – fine filtration


Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Heavy gauge base with low pressure drop bracket

and outlet pipe design Fully drawn weatherhood - no welds to rust or vibrate apart Durable carbon steel construction with baked enamel

finish and powder coated weatherhood Low entry velocity air gap between base and cover Interchangeable media: Polyester, Paper, HEPA

Engines Fans Construction Industry Medical Pneumatic Conveying

Waste Water Aeration Sparging Factory Air

Several element sizes available at a given connection size providing a choice according to the severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request


Compact Inlet Filters "F" Series 3” - 6” MPT


I = Industrial Duty S = Severe Duty E = Extreme Duty

FILTER A

SSEMB

LIES F, FT, SpinM

eister Series





®






I F-235P-400F F-234P-400F 4" 14 4 10 300 520 570 20S F-245P-400F F-244P-400F 4" 14 4 16 450 520 880 27E F-275P-400F F-274P-400F 4" 14 4 16 450 520 1100 31I F-245P-500F F-244P-500F 5" 14 4 16 500 800 880 27S F-275P-500F F-274P-500F 5" 14 4 16 650 800 1100 32I F-275P-600F F-274P-600F 6" 15 5 16 650 1100 1100 34

F34-306 pg. 4





Waste Water Aeration Sparging Factory Air


Compact Inlet Filters "F" Series 4” - 6” 125/150# Pattern Flange



and outlet pipe design Fully drawn weatherhood - no welds to rust or vibrate apart Durable carbon steel construction with baked enamel

finish and powder coated weatherhood Low entry velocity air gap between base and cover Interchangeable media: Polyester, Paper, HEPA

Several element sizes available at a given connection size providing a choice according to the severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request


125/150# DIMENSIONS - inches No. of FlangePattern Flg O.D. B.C. B.H. Holes Thickness

4" 9 7 1/2 0.75 8 0.385" 10 8 1/2 0.88 8 0.386" 11 9 1/2 0.88 8 0.38

FILT

ER A

SSEM

BLI

ES

F, F

T, S

pinM

eist

er S

erie

s





®





8" 13 1/2 11 3/4 0.88 8 0.3810" 16 14 1/4 1 12 0.3812" 19 17 1 12 0.514" 21 18 3/4 1 1/2 12 0.5


Polyester Paper Flg Blower, Element Approx.Element Element Outlet A B C Piston Fan Rating Wt. lbs

I F-377P-800F F-376P-800F 8" 23 6 22 1/2 1440 1800 1825 68S F-385P-800F F-384P-800F 8" 23 6 28 1/2 1440 1800 3295 125E F-485P-800F F-484P-800F 8" 31 6 28 1/2 1800 1800 4705 138I F-385P-1000F F-384P-1000F 10" 23 6 28 1/2 1800 3300 3300 130S F-485P-1000F F-484P-1000F 10" 31 6 28 1/2 2600 3300 4705 143E F-685P-1000F F-384P(2)-1000F 10" 38 6 28 1/2 2880 3300 6600 165I F-385P-1200F F-384P-1200F 12" 23 6 28 1/2 2600 3300 3300 135S F-485P-1200F F-484P-1200F 12" 31 6 28 1/2 2600 4700 4705 155E F-685P-1200F F-384P(2)-1200F 12" 38 6 28 1/2 3500 4700 6600 175E F-485P(2)-1200F F-484P(2)-1200F 12" 53 6 28 1/2 4320 4700 9410 195S F-485P(2)-1400F F-484P(2)-1400F 14" 53 6 28 1/2 5400 6000 9410 245

F44-306 pg. 5



1/8” tap holes Pressure Drop Indicator Available in Stainless Steel


Waste Water Aeration Sparging Cement Power Plants Factory Air

Epoxy coated housings Various media available

“Big Boy” Inlet Filters "F" Series 8”-14” 125/150# Pattern Flange

Special connections Single Barrel Lg Flow Mega Boy Filters


and outlet pipe design Durable carbon steel construction with baked enamel

finish and powder coated weatherhood Low entry velocity air gap between base and cover

Interchangeable media: Polyester, Paper, HEPA Several element sizes available at a given connection

size providing a choice according to the severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request






®

FILTER A

SSEMB

LIES F, FT, SpinM

eister Series

Outlet

Inlet

®






I MIN025 ---- 1/4" 3 3/4 1 3/4 7 7 7 0.5I MIN038 ---- 3/8" 3 3/4 1 3/4 7 7 7 0.5I FT-15-050 FT-14-050 1/2" 4 1 1/2 4 1/2 10 10 35 1.20I FT-15-075 FT-14-075 3/4" 4 1 1/2 4 1/2 20 25 35 1.30I FT-15-100 FT-14-100 1" 4 1 1/2 4 1/2 25 35 35 1.40S FT-19P-100 FT-18P-100 1" 6 5/8 1 5/8 4 1/2 35 55 100 1.80I FT-19P-125 FT-18P-125 1 1/4" 6 5/8 1 5/8 4 1/2 55 70 100 1.80I FT-19P-150 FT-18P-150 1 1/2" 6 5/8 1 5/8 4 1/2 70 85 100 2I FT-31P-200 FT-30P-200 2" 7 1/4 2 1/4 6 85 135 195 3S FT-231P-200 FT-230P-200 2" 12 1/2 2 1/4 6 135 135 195 7I FT-31P-250 FT-30P-250 2 1/2" 7 1/2 2 1/2 6 100 195 195 4S FT-231P-250 FT-230P-250 2 1/2" 12 3/4 2 1/2 6 195 195 300 7I FT-231P-300 FT-230P-300 3" 13 3 6 300 300 300 8

FT14-306 pg. 6




Engines Construction Workshop Medical/Dental Industry Pneumatic Conveying



Small Compact Exposed Element Filters "FT" Series 1/2” - 3” MPT


Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Exposed element for optimal air flow and low restriction Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop

outlet pipe design Durable carbon steel construction with baked

enamel finish Interchangeable media: Polyester, Paper, HEPA

Several element sizes available at a given connection size providing a choice according to severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request

I = Industrial Duty S = Severe Duty

FILT

ER A

SSEM

BLI

ES

F, F

T, S

pinM

eist

er S

erie

s





®






S FT-235P-300 FT-234P-300 3" 13 3 8 300 300 570 13S FT-245P-300 FT-244P-300 3" 13 3 10 300 300 880 19E FT-275P-300 FT-274P-300 3" 13 3 12 300 300 1100 22I FT-235P-400 FT-234P-400 4" 14 4 8 300 520 570 17S FT-245P-400 FT-244P-400 4" 14 4 10 450 520 880 20E FT-275P-400 FT-274P-400 4" 14 4 12 450 520 1100 24I FT-245P-500 FT-244P-500 5" 14 4 10 500 800 880 21S FT-275P-500 FT-274P-500 5" 14 4 12 650 800 1100 25I FT-275P-600 FT-274P-600 6" 15 5 12 650 1100 1100 27

FT24-306 pg. 7




Compact Exposed Element Filters "FT" Series 3” - 6” MPT



Engines Fans Construction Medical Pneumatic Conveying

Waste Water Aeration Sparging Power Plants Factory Air






FILTER A

SSEMB

LIES F, FT, SpinM

eister Series





®





Polyester Paper FLG Blower, Element Approx.Element Element Outlet A B C Piston Fan Rating Wt. lbs

I FT-235P-400F FT-234P-400F 4" 14 4 8 300 520 570 15S FT-245P-400F FT-244P-400F 4" 14 4 10 450 520 880 21E FT-275P-400F FT-274P-400F 4" 14 4 12 450 520 1100 24I FT-245P-500F FT-244P-500F 5" 14 4 10 500 800 880 24S FT-275P-500F FT-274P-500F 5" 14 4 12 650 800 1100 28I FT-275P-600F FT-274P-600F 6" 15 5 12 650 1100 1100 31

FT34-306 pg. 8






Compact Exposed Element Filters "FT" Series 4” - 6” 125/150# Pattern Flange



Waste Water Aeration Sparging Power Plants Factory Air





Flange Orientation


4" 9 7 1/2 0.75 8 0.385" 10 8 1/2 0.88 8 0.386" 11 9 1/2 0.88 8 0.38

FILT

ER A

SSEM

BLI

ES

F, F

T, S

pinM

eist

er S

erie

s





®





Polyester Paper Flange Blower, Element Approx.Element Element Outlet A B C Piston Fan Rating Wt. lbs

I FT-377P-800F FT-376P-800F 8" 23 6 14 3/4 1440 1800 1825 65S FT-385P-800F FT-384P-800F 8" 23 6 19 3/4 1440 1800 3295 70E FT-485P-800F FT-484P-800F 8" 31 6 19 3/4 1800 1800 4705 75I FT-385P-1000F FT-384P-1000F 10" 23 6 19 3/4 1800 3300 3300 80S FT-485P-1000F FT-484P-1000F 10" 31 6 19 3/4 2600 3300 4705 85E FT-685P-1000F FT-384P(2)-1000F 10" 38 6 19 3/4 2880 3300 6600 95I FT-385P-1200F FT-384P-1200F 12" 23 6 19 3/4 2600 3300 3300 85S FT-485P-1200F FT-484P-1200F 12" 31 6 19 3/4 2600 4700 4705 90E FT-685P-1200F FT-384P(2)-1200F 12" 38 6 19 3/4 3500 4700 6600 100E FT-485P(2)-1200F FT-484P(2)-1200F 12" 53 6 19 3/4 4320 4700 9410 120S FT-485P(2)-1400F FT-484P(2)-1400F 14" 53 6 19 3/4 5400 6000 9410 160

FT44-306


1/8” tap holes Pressure Drop Indicator Available in Stainless Steel

Epoxy coated housings Various media available

Special connections Single Barrel Lg Flow Mega Boy Filters

“Big Boy” Exposed Element Filters "FT" Series 8” - 14” 125/150# Pattern Flange






enamel finish

Interchangeable media: Polyester, Paper, HEPA Several element sizes available at a given connection

size providing a choice according to severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request

Flange Orientation






®


8" 13 1/2 11 3/4 0.88 8 0.3810" 16 14 1/4 1 12 0.3812" 19 17 1 12 0.514" 21 18 3/4 1 1/2 12 0.5

pg. 9

FILTER A

SSEMB

LIES F, FT, SpinM

eister Series

®







®

SpinMeister® Inlet Filters For Pressure Systems, Extreme Duty Filtration "SM" Series 1/2”-4” MPT & 4”-12” 125/150# Pattern Flange

SM13-306 pg. 10


Screw Compressors Engines Blowers Fans

Multiple Configurations Available SpinMeistersT® available in Polished

Aluminum

Grain Elevators Cement Industry Plastics Industry

Vacuum Systems configurations Selected Housings available in SS Various Media for Element

1/8” taps for pressure drop indicators on selected models Multiple connection types

Extreme Duty Filtration for high dust environments Significantly Increases the life of the filter element The centrifugal flow forces particulate through the side

louver. It achieves 85% efficiency @ 15 micron or larger. The air stream then enters the lower chamber and is filtered

by a 99+% efficient pleated element SpinMeister® Precleaner is made of durable molded fiber

filled composite material This is a configured product which enables unit to be

modified to specific applications

Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Filter housing has heavy gauge carbon steel base with low

pressure drop bracket and outlet pipe design Durable carbon steel housing construction All small compact filters are a seamless drawn housing Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P

SpinMeisterTM Air Flow

Note: Contact your Solberg representative for specific sizing and availability. Registered Patent on SpinMeister®

Config. A

CONFIGURATION DRAWING SCHEMATIC

Config. B Config. C Config. D Reference Only Rated

Connection Dimensions - inches Flow Approx.Outlet Style A B C SCFM Wt. lbs

A SM1.5-11-050 SM1.5-10-050 1/2" MPT 7 3/8 7/8 4 1/8 30 1.5A SM1.5-11-075 SM1.5-10-075 3/4" MPT 7 3/4 1 1/4 4 1/8 30 1.5A SM2-11-050 SM2-10-050 1/2" MPT 7 3/8 7/8 4 1/8 40 2A SM2-11-075 SM2-10-075 3/4" MPT 7 3/4 1 1/4 4 1/8 40 2A SM2-11-100 SM2-10-100 1" MPT 7 3/4 1 1/4 4 1/8 40 2B SM2-19P-100 SM2-18P-100 1" MPT 10 5/8 1 1/2 7 55 3.7B SM2-19P-125 SM2-18P-125 1-1/4" MPT 10 3/4 1 5/8 7 70 3.7B SM2-19P-150 SM2-18P-150 1-1/2" MPT 10 3/4 1 5/8 7 85 3.7B SM2-19P-200 SM2-18P-200 2" MPT 11 3/8 2 1/4 7 100 4B SM2-19P-250 SM2-18P-250 2-1/2" MPT 11 5/8 2 1/2 7 110 4C SM3-235P-300 SM3-234P-300 3" MPT 18 3/4 3 11 250 31C SM4-235P-300 SM4-234P-300 3" MPT 19 5/8 3 11 300 32C SM3-235P-400 SM3-234P-400 4" MPT 19 3/4 4 11 250 32C SM4-235P-400 SM4-234P-400 4" MPT 20 5/8 4 11 400 33C SM3-235P-400F SM3-234P-400F 4" FLG 19 3/4 4 11 250 35C SM4-235P-400F SM4-234P-400F 4" FLG 20 5/8 4 11 400 36D SM6-275P-400F SM6-274P-400F 4" FLG 30 3/4 4 16 500 45D SM42-377P-500F SM42-376P-500F 5" FLG 28 1/2 4 22 1/2 800 88D SM62-377P-600F SM62-376P-600F 6" FLG 30 1/2 5 22 1/2 1100 100D SM62-377P-800F SM62-376P-800F 8" FLG 31 1/2 6 22 1/2 1800 103D SM63-385P-1000F SM63-384P-1000F 10" FLG 30 1/2 6 28 1/2 2700 138D SM63-485P-1200F SM63-484P-1200F 12" FLG 37 1/2 6 28 1/2 2700 163

Reference Onlywith Polyester

Elementwith PaperElement

Wood Chip, Paper & Pulp Industries Pneumatic Conveying Systems Foundries

FILT

ER A

SSEM

BLI

ES

F, F

T, S

pinM

eist

er S

erie

s

®




REPLACEMENT PARTS

FAP-306 pg. 11

®

Standard Replacement Parts/Accessories For All Filter Assemblies & Exposed Element Filters

Normal Clean Filter

Gauge shows how much capacity

remains

Gauge shows filter element capacity

used. Filter requires service

Solberg’s Filter Monitor Gauge shows the amount of filter element restriction and how much life the element has left. This is a convenient and inexpensive solution to receiving the maximum usage from every element.

Part No: VG-020-013

PRESSURE INDICATOR

Note: The monitor gauge has a 1/8” MPT connection. It is mounted either on the weatherhood or on the outlet pipe depending on the filter assembly. (Tap Hole Option Required)

“MEGA BOY” FILTER ASSEMBLIES

Weatherhood/Top Element Top Top Wingnut(s)/Parent Model Prefilter for F Series for F Series for FT Series Lock Hex Nut(s) Washer(s)

F/FT-Element-Connection Model Model No. Model No. Model No. Model No. Model No.Model-15/14-xxx PF14 WH6X2 N/A T4500312 WN25X20 WR25X20Model-19/18-xxx PF18 WH6X5 N/A T4500312 WN25X20 WR25X20Model-31/30-xxx PF30 WH7.625X5 N/A T6000312 WN25X20 WR25X20Model-231/230-xxx PF230 WH10X10 N/A T6000312 WN38X16 WR38X16Model-235/234-xxx PF234 WH10X10 N/A T8000437 WN38X16 WR38X16Model-245/244-xxx PF244 WH16X10 N/A T1000437 WN38X16 WR38X16Model-275/274-xxx PF274 WH16X10 N/A T12000437 WN38X16 WR38X16Model-375/374-xxx PF374 WH16X16 N/A T12000625 LHN50X13 WR50X13Model-377/376-xxx PF376 WH22.5X15 N/A T14750625 LHN50X13 WR50X13Model-385/384-xxx PF384 WH28X15 N/A T19750625 LHN50X13 WR50X13Model-384(2)-xxx PF384(2) T28000625 T19750625 T19750625 LHN50X13 WR50X13Model-485/484-xxx PF484 WH28X24 N/A T19750625 LHN50X13 WR50X13Model-485(2)/484(2)-xxx PF484(2) T28000625 T19750625 T19750625 LHN50X13 WR50X13Model-685-xxx PF684 T28000625 T19750625 T19750625 LHN50X13 WR50X13

“Mega Boy” Filters are single barrel style filters that are available up to 8000 SCFM and up to a 24” flange. It is perfect for space restricted areas while still needing a filter that can handle large air flows. Stainless Steel and epoxy coated housings also available. For more information ask for Datasheet FMGF.

FILTER A

SSEMB

LIES F, FT, SpinM

eister Series

Side Outlet Bottom Outlet

MULTIBARREL FILTER ASSEMBLIES Multibarrel Filters are available up to a 30” flange and 25,000 CFM. It is available in both box or trapezoid style manifold with either bottom or side outlets. Stainless Steel and epoxy coated housings also available. For more information ask for Datasheet MBF.

FAEL-5213 pg. 12

®

P= Polyurethane Prefilter

99+% removal efficiency to 5 micron Reinforced with epoxy coated steel wire on both

sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50%

with polyurethane prefilter Temp (continuous):

min -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

99+% removal efficiency to 2 micron Heavy duty industrial strength paper

surrounded by heavy gauge galvanized expanded metal Dust loading capacity is increased 40 - 50%

with polyurethane prefilter Temp (continuous):

min: -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design

ADVANTAGES Less maintenance More durable Moisture resistant Handles hot air and oil mist from unload cycle of

reciprocating/piston compressor

ADVANTAGES Optimal surface area per given size Higher efficiency than many alternative media Cost Effective

Replacement Filter Elements


Particle Size vs. Filter Efficiency on polyester media at indicated face velocity: 15 cfm/ft² media 30 cfm/ft² media 45 cfm/ft² media

POLYESTER ELEMENTS Particle Size vs. Filter Efficiency on paper media at indicated face velocity: 10 cfm/ft² media 15 cfm/ft² media 20 cfm/ft² media

PAPER ELEMENTS

STD Endcap DIMENSIONS - inches Polyester Paper Rated FlowPolyester Paper Features ID OD HT Surface Area ft2 SCFM

05 04 I --- 2 1/4 1 0.2 0.2 807 06 I --- 3 1 3/8 0.58 0.58 1211 10 I --- 4 1 3/8 1.1 1.1 3515 14 M 3 4 3/8 2 5/16 0.50 1.12 35

19P® 18P M 3 4 3/8 4 3/4 1.5 3.0 10031P 30P M 3 5/8 5 3/4 4 3/4 2.3 6.2 195

231P 230P M 3 5/8 5 3/4 9 1/2 4.5 11.8 300825 824 TC 1 1/2 2 1/2 2 1/2 0.38 0.92 25843 842 T 2 3/8 3 7/8 2 3/4 0.60 1.7 55849 848 T 2 9/16 5 4 7/8 2.0 5.0 115851 850 TR 3 1/2 5 7/8 8 3/4 4.5 14.0 290239 238 GBN 4 7/8 9 1/4 10 11.5 52 57035P 34P M 4 3/4 7 7/8 4 13/16 4.0 11 275

235P 234P M 4 3/4 7 7/8 9 5/8 8.3 22.8 570335P 334P M 4 3/4 7 7/8 14 1/2 12 34 800 245P 244P GN | M 6 9 3/4 9 5/8 14 35.5 880 345P 344P GN 6 9 3/4 14 1/2 22.1 57 1100 275P 274P GN 8 11 3/4 9 5/8 19 45.4 1100 375P 374P GN 8 11 3/4 14 1/2 28 68.1 1500 377P 376P GN 9 14 5/8 14 1/2 50 125 1825 385P 384P GN 14 19 5/8 14 1/2 50 140 3300 485P 484P GN 14 19 5/8 21 1/2 75 200 4705 685P --- GN 14 19 5/8 28 1/2 100 --- 6600

FILT

ER A

SSEM

BLI

ES

F, F

T, S

pinM

eist

er S

erie

s

1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 General Office: 630.616.4400 E-mail: [email protected] Web Site: www.solbergmfg.com

Face Velocity vs. Dust Holding Capacity

Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps For other media types please see element brochure, Bulletin EL or contact your representative for more information. Inquires encouraged. Note: Model offerings and design parameters may change without notice.

Solberg Manufacturing Inc. – Discover the Possibilities

Solberg-Filter Assemblies-FA160

Documents

lbsi f

solberg filter assemblies

c filter

initial delta p pressure

industrial duty s

element element outlet

element sizes available

ft series