SMITH VALVE The Solid Collection High Pressure Integral Flanged Gate, Globe & Check Valves Flanged End Class 1500 (ASME B16.34/API 602) Flanged End Class 2500 (ASME B16.34) The Longest Lasting Line of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves
18
Embed
SMITH VALVE - Valve Source INC · SMITH VALVE The Solid Collection High Pressure Integral Flanged Gate, Globe & Check Valves Flanged End Class 1500 (ASME B16.34/API 602) Flanged End
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SMITH VALVE The Solid Collection
High Pressure Integral Flanged Gate, Globe & Check ValvesFlanged End Class 1500 (ASME B16.34/API 602)
Flanged End Class 2500 (ASME B16.34)
The Longest Lasting Line of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves
SMITH VALVE | The Newdell Co | The Solid Collection 3
SMITH VALVEThe Solid CollectionSMITH® OVERVIEWSmith, manufactures a wide variety of API 602 and ASME B16.34 forged valves. Smith has made substantial and continuous investments in technology, resulting in improved engineering, designs, and manufacturing processes.
The Smith SOLID COLLECTION of High Pressure Flanged End Valves is one of many product offerings that exemplify Smith’s ongoing commitment to provide the highest quality products and customer service in the industry.
SMITH VALVE | The Newdell Co | The Solid Collection4
EXTENSIVE MATERIAL RANGESMITH offers a full-range of body materials including carbon steel, chrome alloy steel, many grades of stainless steel, and many types of high alloy materials. In addition, trim materials matching all API Trim Numbers (see API 602) are available as well as virtually any other specialty trims or combinations. Packing material options are also available when standard, low emission Grafoil® packing material is not desired.
EASY MAINTENANCEThe round bolted bonnet design makes for easy in line maintenance. The RTJ gasket is a standard size and easily obtainable from multiple sources. There are no special tools required and the on-line IOM (Installation, Operation and Maintenance) provides all the required torque information for reassembly.
SERVICE OFFERINGSSmith has been manufacturing forged steel valves for over 50 years. The Smith Branded product lines are found on almost all North American AML documents and carried by most of the largest front line distribution companies. As the products are manufactured in the USA availability is unmatched by all foreign competition.
With our facilities being located in Houston, Texas, processes such as plant inspections, customer relations, expediting, project coordination, and special handling/shipping instructions are all easily attended.
LOW FUGITIVE EMISSIONSOver the last ten years the world has focused on global warming and the potential cause of same. We do not pretend to understand this complicated phenomenon but if there is a chance that emissions from processing plants are adding to global warming we want to make sure that we do our part to ensure Smith products are not contributing to the problem. At SMITH we have done extensive testing of our packing systems. Testing documents according to API 624, MESC SPE 77/300, API 622, and Method 21 are all available to our customers.
THE SMITH ADVANTAGEThis High Pressure Flanged design valve is unmatched in the industry. Below we have listed the features and benefits of the design. When the customer matches this quality design with local service, the result is a satisfied customer receiving a great product within a short time.
Testing per API 598
Design per ASME B16.5, B16.10, B16.25, B16.34, and API 602 (as applicable)
Manufactured under ISO Q9001-2008 Quality Program
Full Bore Design
Non-rotating Stem
Low Seating Torque
Non Rising Handwheel
Classes 1500 & 2500 thru 2”
Stellite 6™ Seating
Round Bolted Bonnet Design
Low Fugitive Emissions
RTJ Bonnet Gasket
Thrust Bearings for Low Torque Operation
Integral End Flanges
Optimal flow path warranting high Cv
Live-load packing available
Full material range
Trims offered in a full range
Solid Wedge design
OS&Y design
T-head Forged Stem
RF or RTJ End Flanges available
Full length wedge guides
Stem Lubricant System
Threaded, Socket Weld, and Weld End Connections available
EXTENSIVE MATERIAL RANGESMITH offers a full-range of body materials including carbon steel, chrome alloy steel, many grades of stainless steel, and many types of high alloy material. In addition, trim materials matching all API Trim Numbers (see API 602) are available as well as virtually any other specialty trims or combinations. Packing options are also available when standard, low emission Grafoil® packing material is not desired.
EASY MAINTENANCEBolted bonnet designs allow for easy disassembly when needed for evaluation of valve condition or maintenance. Please see the Smith IOM (Installation, Operation and Maintenance) Manual for details.
SERVICESSmith maintains broad acceptance and approval among end users and engineering companies. In addition, distribution is supported by many stocking distributors for local access to Smith Valves. Please contact Smith for assistance with customer approvals or to locate the nearest stocking distributor.Smith maintains an extensive parts inventory in Houston, Texas to support rapid availability of replacement parts when needed.
Our professional sales teams offer responsive quotation services for day-to-day needs as well as for the most complex project requisitions which include extensive technical requirements and documentation. When necessary, our engineering and technical staff stands ready to support our sales teams for all technical requests.
LOW FUGITIVE EMISSIONSAs a standard, Smith Gate and Globe Valves are supplied with Low Emission packing tested to international standards and in some cases, to specific end user protocols. Solid Collection Globe Valves are designed with extra large stuffing boxes and packing ring cross-sections coupled with non-rotating stems, all of which provide enhanced fugitive emissions performance. For test data or technical information, please contact Smith.
SPECIAL REQUIREMENTSFor special requirements such as High Temperature Service, Cryogenic Service, Bellows Seal Valves, Live Loading, Needle Disc Globes or other special features, please contact Smith.
Smith® ADVANTAGES
HANDWHEEL NUT
YOKE NUT
GREASE FITTING
THRUST BEARING
GLAND FLANGE
GLAND
PACKING
BONNET
RTJ RING
STEM KEY
DISK WIRE
DISC
INTEGRAL STELLITE 6 SEAT
STEM
HANDWHEEL
YOKE NUT RETAINER
GLAND STUD NUT
GLAND STUD
BONNET NUT
BONNET STUD
BODY
Test per API 598
Design per ASME B16.5, B16.10, B16.25, B16.34
Manufactured under ISO Q9001-2008 Quality Program
Full Bore Design
Non-rotating Stem
Low Seating Torque
Non Rising Handwheel
Enhance Cv Rating
Classes 1500 & 2500
Integral Stellite 6™ Seat
Bolted Bonnet design
Low Fugitive Emission
RTJ Gasket
Socket weld, threaded & weld end connections available
Thrust Bearings for low operation torque
Stellite 6™ HF on critical components to ensure longevity
Live-loading adaptation available
Fully serviceable in-line
Full material range
Trims offered in a full range
OS&Y design
RF & RTJ ends available
Full length disc guide
Non-Rotating Disc available
Needle & Parabolic Disc available
Stop check design available
Stem lubricant system
Smith® Flanged Globe Valve
SMITH VALVE | The Newdell Co | The Solid Collection8
EXTENSIVE MATERIAL RANGESMITH offers a full-range of body materials including carbon steel, chrome alloy steel, many grades of stainless steel, and many types of high alloy material. In addition, trim materials matching all API Trim Numbers (see API 602) are available as well as virtually any other specialty trims or combinations.
EASY MAINTENANCEThe round bolted bonnet design makes for easy in line maintenance. The RTJ gasket is a standard size and easily obtainable from multiple sources. There are no special tools required and the on line IOM (Installation, Operation and Maintenance) provides all the torque information for reassembly.
SERVICE OFFERINGSSmith has been manufacturing forged steel valves for over 50 years. The Smith Branded product lines are found on almost all North American AML documents and carried by most of the largest front line distribution companies. As the products are manufactured in the USA availability is unmatched by all foreign competition.
With our facilities being located in Houston Texas processes such as; plant inspections, customer relations, expediting, project coordination, and special handling/shipping instructions are all easily attended.
THE SMITH ADVANTAGEThis High Pressure Flanged design valve is unmatched in the industry. Below we have listed the features and benefits of the design. When the customer matches this quality design with local service, the result is a satisfied customer receiving a great product in a timely manner.
Smith® ADVANTAGES
Test per API 598
Design per ASME B16.5, B16.10, B16.25, B16.34
Manufactured under ISO Q9001-2008 Quality Program
Full Bore Design
Enhance Cv Rating
Classes 1500 & 2500
Integral Stellite 6™ Seat
Bolted Cap design
RTJ Gasket
Available with or without spring
Available as Swing Check
Socket weld, threaded & welded connections available
Stellite HF on critical components to ensure longevity
Fully serviceable in-line
Full material range
Trims offered in a full range
RF & RTJ ends available
Full length disc or ball guide
Smith® Flanged Piston Check Valve
Smith® Flanged Ball Check Valve
SMITH VALVE | The Newdell Co | The Solid Collection 11
Bolted Bonnet Piston Check Valve - SC89Class 1500 Integral Flanged Full Bore Round RTJ Bonnet Design
Forged Steel, OS&Y, Bolted Bonnet, Piston Check, Full Bore: Valves comply with API 602 and ASME B16 .34
1 . Permissible but not recommended for prolonged use above 800°F .2 . Permissible but not recommended for prolonged use above 1,100°F .3 . Not to be used over 1,000°F .4 . Not to be used over 800°F .5 . F316DC has same P/T rating as F316 above but limited to 1000°F .
- Always refer to the latest edition of ASME B16 .34 for up to date Pressure and Temperature Rating .- Convert from psi to bar, divide value by 14 .5 .- Temperature conversion: [°C] = ([°F] - 32) X 5/9 .
SMITH VALVE | The Newdell Co | The Solid Collection 17
SMITH NUMBERING SYSTEMHigh Pressure Flanged Gate, Globe & Check Valves
Example Below: Smith Class 1500 RTJ Bonnet 1” A105 Trim 12 Integral RTJ Flanged End Globe Valve.
STYLE CODE + MATERIAL SELECTION PER TABLE BELOW + SIZE CODE
G 8 9 5 O S O S J 1 0 0
CUSTOMIZATIONUse “O” or “T” for Standard ServiceUse “S” for HF Acid ServiceUse “U” or “Y” for NACE ServiceUse “CE” prefix for European Commission Pressure Equipment Directive 97/23/ECUse “X” suffix oxygen cleaning requirements
STYLE CODE0895-Bolted Bonnet Flanged End Gate-Class 15002595-Bolted Bonnet Flanged End Gate-Class 2500G895-Bolted Bonnet Flanged End Globe-Class 1500G259-Bolted Bonnet Flanged End Globe-Class 2500SC89-Bolted Bonnet Flanged End Piston Check-Class 1500SC29-Bolted Bonnet Flanged End Piston Check-Class 2500SB89-Bolted Bonnet Flanged End Ball Check-Class 1500SB29-Bolted Bonnet Flanged End Ball Check-Class 2500
MATERIAL CODE
OTOS- ASTM A105 BODY
KTOS- ASTM A182 F11 BODY
NTOS- ASTM A182 F22 BODY
PTOS- ASTM A182 F91 BODY
JWOS- ASTM A182 F316 BODY
END CODEB -Butt WeldJ - Ring JointO- Female NPT THD/Flanged endsU - Socket Weld x F-NPTW - Socket WeldY - Female NPT x BWE
SIZE CODE
050- ½”NPS/DN 15
075- ¾”NPS/DN 20
100- 1”NPS/DN 25
150- 1 ½ “ NPS/DN 40
200- 2”NPS/DN 50
Body/Bonnet/CoverSHELL
APITRIM #
TRIM MATERIALPACKING GASKET END
CONNECTIONSTEM DISC/WEDGE SEAT
A F51 A 10 316 316 316 A GRAPHITEV-RINGS A INCOLOY
825+GRAPHITE A
B F347 B 11 MONEL MONEL HF B B INCONEL600/X750+GRAPHITE B BUTT-WELD
C F5 C KMONEL MONEL MONEL C CHESTERTON C C
D F316H D 9 MONEL NACE D D INCONEL600/X750+TFE D
E HASTELOYC276 E 347 347 HF E GEARLOCK F VSP E E
F F20 F 13 A20 F F A20 + GRAPHITE F
G F9 G 317L 317L
HF
G G 316 + GRAPHITE G
H F321 H 347H HF H H HAST-C276 +GRAPHITE H
I F347H I 347H 347H I I 347 + GRAPHITE I
J F316DC J 316H 316H J J J RING JOINT
K F11 K 410 NACE K K 317L+ GRAPHITE K
L F317L L 316 316+INSERT
HF
L L L
M M 316H HF M BRAIDED TFE M MONEL+ GRAPHITE M
N F22 N 304 304 N N N
O A105NLC O 8 410 410 O GRAPHITE W/BRAIDED ENDS O 304/316+GRAPHITE O FEMALE NPT/