Top Banner
Sintering furnace for zirconium oxide ©2016 DENTSPLY International, Inc. All rights reserved. 800560 Rev. 0 (01/2016) prosthetics.dentsply.com Multimat2Sinter, 230-240v, REF 54 6029 0003 Parameter External dimensions Heating chamber volume Maximum temperature Heating rate Weight Nominal supply voltage Frequency Permissible deviation from nominal voltage Maximum power consumption Overvoltage category Protection against overvoltage Fuse rating (on site) Value 15 x 31 x 20 inches 2 speed-sintering trays, 100mm in diameter 1,650˚C / 3002˚F Selectable: 1-99˚C/min., 1.8-178.2˚F/min. 58 kg / 128 lbs. 200-240 VAC 50/60 Hz +/- 10% 2000 W II (pursuant to IEC 60364-4-443) Provide suitable surge filters Connection to a separate circuit with a slow 10-A, 250-V fuse Technical specifications: Aluminium oxide beads for zirconium oxide Speed-sintering bowl assembly Speed-sintering assembly, consisting of: Base/Lid Base/Lid Ring Pliers for tray, 25 cm long 55570153 5355670109 5355670110 5355670110 5355670111 5355670113 Accessories: 1 Sintering furnace 1 Power cable 1 Zirconium oxide door 1 Speed-sintering tray, 100 mm in diameter 1 Aluminium oxide beads, 1 – 2 mm (200 g) for zirconium oxide 1 Tray forceps 1 Instructions for Use in 5 languages on CD-ROM 1 Quick Reference guide, printed 1 Information on setting the language at startup Scope of delivery: DENTSPLY International, Inc. DENTSPLY Prosthetics 570 West College Avenue York, PA 17401 1-800-243-1942 Distributed by: DENTSPLY Canada 161 Vinyl Court Woodbridge, Ontario L4L 4A3 905-968-5374 Manufacturer: DeguDent GmbH Rodenbacher Chaussee 4 63457 Hanau-Wolfgang Germany Telefon +49/6181/5950
2

Sintering furnace for zirconium oxide - Dentsply Sirona · sintering temperatures. ˙ With the custom programming option, material parameters can be individually programmed and saved.

Mar 15, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Sintering furnace for zirconium oxide - Dentsply Sirona · sintering temperatures. ˙ With the custom programming option, material parameters can be individually programmed and saved.

Sintering furnace for zirconium oxide

©2016 DENTSPLY International, Inc. All rights reserved. 800560 Rev. 0 (01/2016)prosthetics.dentsply.com

Multimat2Sinter, 230-240v, REF 54 6029 0003

Parameter

External dimensions

Heating chamber volume

Maximum temperature

Heating rate

Weight

Nominal supply voltage

Frequency

Permissible deviation from

nominal voltage

Maximum power consumption

Overvoltage category

Protection against overvoltage

Fuse rating (on site)

Value

15 x 31 x 20 inches

2 speed-sintering trays,

100mm in diameter

1,650˚C / 3002˚F

Selectable: 1-99˚C/min.,

1.8-178.2˚F/min.

58 kg / 128 lbs.

200-240 VAC

50/60 Hz

+/- 10%

2000 W

II (pursuant to IEC 60364-4-443)

Provide suitable surge filters

Connection to a separate circuit

with a slow 10-A, 250-V fuse

Technical specifications:

Aluminium oxide beads for zirconium oxide

Speed-sintering bowl assembly

Speed-sintering assembly, consisting of:

Base/Lid

Base/Lid

Ring

Pliers for tray, 25 cm long

55570153

5355670109

5355670110

5355670110

5355670111

5355670113

Accessories:

1 Sintering furnace

1 Power cable

1 Zirconium oxide door

1 Speed-sintering tray, 100 mm in diameter

1 Aluminium oxide beads, 1 – 2 mm (200 g) for zirconium oxide

1 Tray forceps

1 Instructions for Use in 5 languages on CD-ROM

1 Quick Reference guide, printed

1 Information on setting the language at startup

Scope of delivery:

DENTSPLY International, Inc.DENTSPLY Prosthetics570 West College AvenueYork, PA 174011-800-243-1942

Distributed by:DENTSPLY Canada161 Vinyl CourtWoodbridge, OntarioL4L 4A3905-968-5374

Manufacturer:DeguDent GmbHRodenbacher Chaussee 463457 Hanau-Wolfgang GermanyTelefon +49/6181/5950

Page 2: Sintering furnace for zirconium oxide - Dentsply Sirona · sintering temperatures. ˙ With the custom programming option, material parameters can be individually programmed and saved.

The state-of-the-art Multimat2Sinter sintering furnace has been

designed for processing zirconium oxide restorations with a high

degree of e ciency. With its advanced technology, it is perfectly

suited for processing zirconium oxide restorations.

Thanks to its broad range of included accessories and its intuitive

handling, the furnace is ready for immediate productive use out of

the box.

Multimat2Sinter, 230-240v, REF 54 6029 0003

The e� cient sintering furnace for zirconium oxide

Intuitive menu interface

Pre-installed programs

20 custom program memory locations

High-quality heating elements

Maximum temperature 1,650°C

Speed-sintering and conventional sintering of zirconium oxide

The features

1

2

3

4

5

6

Glowing ring chamber Display and keyboard

1Simple, clear and logical – the 4-line display lets you get started with the furnace right away. It displays all relevant information, and right next to it there is a keyboard for input parameters, with buttons arranged in a user-friendly manner.

4Four high-quality molybdenum disilicide heating elements ensure optimal and homogeneous heat distribution in the sintering chamber. The result is a streamlined workflow with outcomes of a consistently high quality.

2Pre-programmed sintering programs for di� erent materials (such as Cercon base or Cercon ht) are an enormous time saver. Programs are invoked by simply pressing a button.

5The heating elements are highly durable, lowering operating costs considerably; this is due in part to a safe interpretation of the maximum temperature limits, which are far higher than the sintering temperatures.

3 With the custom programming option, material parameters can be individually programmed and saved. The Quick Reference guide will help you create even more complex programs quickly and safely.

6The oven is suitable for both conventional sintering and time-saving speed sintering. With this highly economical process, zirconium oxide frameworks can be completed within one day.

Tray for largebridges

Speed-sintering trayAl2O3 beads for Cercon

Zirconium oxide – Cercon