Schedule of Work Name of Work:- Implementation …...meter, internal panel wiring, simaphore for Vacuum Circuit breaker & isolator, Mimic bus diagram (Metal size 4mm thick X 10mm width).

197

Gross Total

Unit Qty. Rate Amount Unit Qty. Rate Amount

Design, Engineering,manufacturing, Supply, Erection, Testing& commissioning of 33/11KV Power Transformer, Oilimmersed, ONAN cooled outdoor type, 3-phase, 50 Hz, VectorGroup-Dyn-II, delta-star step down with off load tap changerhaving range of +10% to -10% in steps of 2.5% each on HVwinding with first filling of EHV grade insulating oil as perspecification including supply & erection of 90lb rail pole,3.5mtr long, 2nos for each transformer as rail track etc.asrequired conforming to relevant ISS as per design drawingdetailed herein after in this document.

a. 7.5MVA Nos 0 Nos 0

Supply, erection, testing & commissioning of 33 KV, 800A,manually operated horizontal rotating type double break, triple pole Gang operated isolator complete with postinsulator, arching horns, mechanical interlocking arrangementetc.as per relevant ISS(For Rampur S/S and at NSRCC end).

a) With earth switch. No 2 No 2b) Without earth switch. No 1 No 1

3

Supply, erection, testing & commissioning of 33 KV SinglePhase, outdoor type 2 Core C.T of ratio 300 / 1-1 Amp withsuitable burden & class of accuracy complete with associatedterminal box connecting link etc. ( for 33 KV outgoingfeeder)(For RampurS/S)

No 3 No 3

Name of Work:- Implementation of R-APDRP (Part-B) Scheme under Agartala Project(Town Pratapgarh Area): Design,Engineering,Manufacturing, Supply,testing ,Delivery, Erection,Testing at site & commissioning of 33/11 KV, 2X7.5 MVA,Indoor Type Power Sub-Station at NSRCC, Netaji Chowmuhani,Agartala with associated 33KV Underground Rampur Substation- NSRCC S/C Line, 33 KV Bay at Rampur including Control room and boundary wall atNSRCC.

Supply ErectionItem Sl. No

Description of Item

Schedule of Work

SCHEDULE-A

1

2

197

Gross Total



Description of Item

4

Supply, erection, testing & commissioning of 10KA, 30 KV,Station Valve type metal oxide heavy duty Lightning SurgeArrestor suitable for operation on 33KV Sytem conformingto ISI : 3070 (P-1) / 1974 and amendments thereafter and asrequired (1 set at Rampur S/S end and 1 set at NSRCC end).

No 6 No 6

Supply, erection, testing & commissioning of 33 KV, 1000A,750 MVA rupturing capacity, outdoor Vacuum CircuitBreaker complete with motor operated spring closing (Local /Remote) arrangement with all accessories including latticesupport structure,foundation bolts,G.I. nuts & bolts,washersetc. as required and as per relevant ISS complete operative on110V DC at Rampur Substation end .

a) For 33 KV Rampur-NSRCC UG Feeder. No 1 No 1

Supply, erection, testing & commissioning of 33 KV control& relay panel, simplex type complete with differential relay,2-over current and 1- Earth fault combined relay, Auxiliaryrelay, 1- voltmeter, 3- ammeter, CT operated static trivectormeter, internal panel wiring, simaphore for Vacuum Circuitbreaker & isolator, Mimic bus diagram (Metal size 4mm thickX 10mm width).

b) For 33 KV Rampur. No 1 No 1

i) Supply and Erection of Galvanised steel structure and Nuts,Bolts, spring washer etc. as required for 33 KV tower, grantry,post insulator and equpments. a) Steel structure b) Nuts &bolts, spring washer and foundation bolts etc

Lot 1 Lot 1

6

5

199

Gross Total



Description of Item

ii) Supply, erection, testing & commissioning of sub- stationbusbar & stringing materials for 33 KV bus at Rampur end.a)ACSR 7/1.57/6/4.72 mm (DOG ) conductor. b) 40mm dia.Al. pipe for equipments bus current carrying capacity400Amps. c) 7/3.15mm earth wire for substation shielding. d)Ball & socket type 70 KN, 11KV disc Insulator. e) Al. tensionclamps. 3 -U bolt type, ball& socket type, suitable for70KNDisc Insulator and ACSR DOG conductor. f )"T"/ "I" / otherClamp/power connector suitable for ACSR DOG Conductorand Al. tube as required.

Lot 1 Lot 1

Design, Engineering,manufacturing, Supply, erection, testing& commissioning of 33KV, 1250A, 31.5 KA for 3 Sec.Metal Clad withdrawable type indoor VCB,highly reliable, and totally enclosed product under compartmentalisedconstruction combined with positive safety interlocks for safedraw in/draw out of VCB trolley/carriage including draw outtype PT Compartment (with dual rating PT33KV/1.732/110V/1.732-110 V/1.732) in VCB Trolley withstandard integrated protection relays( both numerical &electromechanical) as per IEC62271-100/200, 12 windowalarm & annunciation system and SCADA compatible controlsystem,power pack,series trip arrangement, internal arc testedas per IEC62271-200 including integral earth switch andmotor operated spring charged mechanism, mounted ontruck carriage, complete with self contained mechanism withmechanica & electrical indications of operational status &auxiliary switch as required as per standard requirementspecified in Technical specification section in the documentincluding supply of 1No 2.5 KV Motorised Meggar.

7

8

199

Gross Total



Description of Item

a) Incoming Feeder with CT (CTR: 300/1-1A) at NSRCC end. Nos 1 Nos 1

b) Outgoing feeder for Transformers with CT (CTR: 300-150/1-1-1A)

Nos 2 Nos 2

c) Spare Incoming CT (CTR: 300/1-1A) at NSRCC end Nos 1 Nos 1

Design, Engineering, Supply, Testing & commissioning of 11KV, 800Amps continuos rated current, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete withControl & Relay Pannel Simplex type with 3Phase panneltop mounted PT of ratio: 11000 /110Volt,110 Volt DCactuated electrical closing mechanism and internal wiring,Numerical as well as electromechanical protection by 2-Overcurrent & 1-earth fault combined ( Micom or other reputedmake) digital & electromechanical relays for integratedprotection,1 no.electromechanical AREVA Master TripRelay, auxiliary relays as required,1 no.L&T / SECUREmake "Tri- Vector" Meter(SCADA compatible) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter ,with panel bus mounted C.T and integral earthing facilityincluding inernal arc tested panel conforming to relevantISS/IEC as reqd.including standard indication facilities as perrequirement detailed herein after including supply of ABC drypowder type 2nos, 5kg each and 2Nos each, CO₂ cylindertype with pressure indicator fire extinguisher .

a. Incoming pannel with (CTR: 900-450/1-1-0.577A) Nos 2 Nos 2

9

201

Gross Total



Description of Item

10

Design, Engineering, Supply, Testing & commissioning of 11KV, 800 Amps continuos rated current, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker( for outgoingfeeder) , complete with 1 set of CT of ratio 300/1-1, Control & Relay Pannel Simplex type with 110 Volt DC actuatedelectrical closing/tripping mechanism and internal wiring, 2-Over current & 1-earth fault combined Micom digital relay,1 no.electromechanical AREVA Master Trip Relay, auxiliaryrelays as required,1 no.L&T / SECURE make "Tri- Vector"Meter(SCADA compatible), 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.Tand integral earthing facility including inernal arc tested panelConforming to relevant ISS/IEC as reqd.including standardindication facilities as per requirement detailed herein after.

Nos 5 Nos 5

11

Design, Engineering, Supply, Erection, Testing &commissioning of 110V DC, 240Ah Capacity Sealed andMaintenance Free(SMF) VRLA Battery Bank comprising of60 Nos. 2.2 Volt each Cell (out of 60 cells, 5 Nos. beingspare) complete with all accessories conforming to relevantISS as per latest amendment detailed in the technicalspecification section of the document.

Set 1 Set 1

201

Gross Total



Description of Item

12

Design, Engineering,manufacturing, Supply, Erection, Testingat site & commissioning of 415 VAC(plus minus 10%)nominal input Voltage,50 HZ(plus minus 5%),110 Volt DCOutput with adjustable range, 40A thyristor controlled float cum boost charger(with less than 2% RMS ripple content,without battery connected)less than 60db noise levelconstant voltage processed Battery charger compatible foraforesaid VRLA battery Bank Conforming to relevant ISS andlatest amendment complete with standard protection as per IP-54 to 20 as per IS-2147,built in DCDB, standard indicationsand controls including switches,temperature range of 50degree centigrade and painted by RAL 7032 etc. as requireddetailed in technical specification section of this document.

Nos 1 Nos 1

13

Design, manufacture, testing at works, transport to site,insurance, erection and commissioning of 110Volt D.C.Distribution Boards (DCDB) with dust tight ,verminproof, gasketed door, enclosure made of sheet steel 2 mm.thick CRCA, painted by powder coated paint RAL 7032with Aluminium busbar of 40x6 mm complete with(L&T/GE/C&S/HAVELLS make 1x160 A TP MCCB, 1x32 ADC DP MCB, 6x16 A DC DP MCB, analog Volt & Amperemeter,LED indication,Mains failure and Earth fault Relay etc.including all control and protection gears complete as perrequirement and asdetailed in technical specification sectionin the document.

Nos 1 Nos 1

203

Gross Total



Description of Item

14

Design, manufacture, testing at works, transport to site,insurance, storage, erection and commissioning of( L & T/SECURE/GE make) 415 Volts, A.C. 50 Hz A.C. DistributionBoard complete with 300 Amp. TPN with link in incomingsupply, 3 nos.300/5(15 VA) CT,300 Amp Aluminiumbusbar,1x100A TPN,3x63 A TPN,2x32A TPN,3x63 ADP,5x32 A DP as per requrement including provision forVoltage,Ampere indications and L&T/SECURE makeKWH mete and accessories as described in technicalspecification.

Nos 1 Nos 1

1100 Volts grade PVC insulated PVC sheathed, 2.5sq.mm.( stranded copper conductor) control cable witharmouring of following capacity & core as per IS:1554(Part-I)1988.a) 2 Core 2.5mm2 b) 4 Core 2.5mm2 c) 7 Core 2.5mm2 d) 12Core 2.5mm2

Lot 1 Lot 1

16

Design, Engineering,manufacturing, Supply, laying in positionin cable trench, Testing & commissioning of Single Core, 19/33 KV, 185 Sq. mm. XLPE insulated, screened armouredpower cable as per TSECL approved design, drawing,specification and as reqd. as per direction of Eng-In-Chargeand as detailed herein after in this document.

Mtr 0 Mtr. 175

17

Design, Engineering, manufacturing ,Supply, laying in position in cable trench, Testing & commissioning of Single Core,6.35/11 KV(E), 400 Sq. mm. XLPE insulated armoured powercable in cable trench as per TSECL approved design, drawing,specification and as reqd. as per direction of Eng-In-Chargeand as detailed herein after in this document.

Mtr 0 Mtr. 300

15

203

Gross Total



Description of Item

18

Design, Engineering,manufacturing, testing at works, Supply,laying in position in trench, Testing & commissioning ofThree Core, 6.35/11 KV, 240 Sq. mm. XLPE insulatedarmoured power cable in trench with supply of 1No Hyduliccrimping tool (capable of crimping from range of 50 sqmm to400 sqmm size socket) as per relevant ISS and detailed in theTechnical specification Section in the document and directionof Eng-In-Charge.

Mtr 0 Mtr. 240

19

Design, Engineering, Supply, Testing & commissioning &joints of Indoor type heat shrink end jointing kit for Single core, 185 Sq.mm. Size, XLPE insulated Power Cable ofgrade 19//33KV(E), as per IS 7098 Part-II 1985 and latestammended.

Nos 16 Nos 16

20

Design, Engineering, Supply, Testing & commissioning &joints of 0utdoor type heat shrink end jointing kit for Single core, 185 Sq.mm. Size, XLPE insulated Power Cable ofgrade 19//33KV(E), as per IS 7098 Part-II 1985 and latestammended.

Nos 16 Nos 16

21

Design, Engineering, Supply, Testing & commissioning &joints of Outdoor type heat shrink end jointing kit for Singlecore, 400 Sq.mm. Size, XLPE insulated Power Cable ofgrade 6.35/11 KV(E). as per IS 7098 Part-II 1985 and latestammended.

Nos 16 Nos 16

22

Design, Engineering, Supply, Testing & commissioning &joints of Indoor type heat shrink end jointing kit for Singlecore, 400 Sq.mm. Size, XLPE insulated Power Cable ofgrade 6.35/11 KV(E). as per IS 7098 Part-II 1985 and latestammended.

Nos 16 Nos 16

205

Gross Total



Description of Item

23

Design, Engineering, Supply, Testing & commissioning &joints of Out door type heat shrink end jointing kit for Three core, 240 Sq.mm. Size, XLPE insulated Power Cable ofgrade 6.35/11 KV(E), as per IS 7098 Part-II 1985 and latestammended.

Set 6 Set 6

24

Design, Engineering, Supply, Testing & commissioning &joints of Indoor type heat shrink end jointing kit for Three core, 240 Sq.mm. Size, XLPE insulated Power Cable ofgrade 6.35/11 KV(E). as per IS 7098 Part-II 1985 and latestammended.

Nos 6 Set 6

25

Design, manufacturing, supply, erection, testing &commissioning of 11 KV, 600 ampere rated outdoor typestandard 3 way Kiosk (CNC m/c fabricated and made of 3.25mm sheet) suitable for11 KV cable termination as per relevantISS and IP with copper Busbar and accessories as per TSECLspecification and erection standard ( including grouting ofkiosk legs/support) as detailed herein after.

Nos 2 Nos. 2

a) 9 KV, 5 KA, single pole, Metal oxide gapless surge type LAsuitable for nominal system voltage of 11 KV, 3-Ph., 50 HzAC supply, creepage distance 600 mm. conforming to ISS:3070 / 1985.

Nos 12 Nos. 12

b) 9 Mtr. Long steel tubular pole of designation 410- SP-31conforming to ISS: 2713 / 1980 with base plate complete.

Nos 8 Nos. 8

c ) Steel materials ( channels size 100X50X50x6mm & 75X40X40 X6mm).

MT 1.089 MT 1.089

d ) Steel materials (Angles size 75 X 40 X6mm ). MT 0.15 MT 0.15e)45 KN, 11KV disc insulator with disc fittings. Nos 90 Nos 90f ) 11 KV, 10 KN pin insulator including G.I. pin. Nos 18 Nos 18g) 11 KV 3 pole GOS ( Air break type ) -400A. Set 8 Set 8h) 11KV 3 pole DOF for station transformer 200A. Set 1 Set 1

SCHEDULR -"B"( 11 KV outgoing bus bar) .

26

205

Gross Total



Description of Item

i) Nuts & bolts assorted size Kg 30 Kg 30j) 50X6 mm M.S flat for clamp Nos 67 Nos 67k ) ACSR (Rabbit ) 6/1/3.35 mm. Km 0.01 Km 0.01l ) Suitable for ACSR Rabbit conductor PG Clamp Nos 36 Nos 36

Design,Engineering, testing, manufacturing ,commissioning and Supply of 3 Core, 19/33 KV, XLPEinsulated armoured power cable.a) 300sqmm Mtr. 0 Mtr. 0

2

Supply of 150 mm nominal bore (outer side dia: Min163.9mm & Max. 166.5mm, Waii thickness: 5.40mm,21.30Kg /mtr.) heavy duty (C-Class) make best quality GIPIPE as per ISS 1239(Pt-1)-2004, equvalent to BS 1387/1985of different length as per requirement of engineering for usingat road crossing/river crossing/cherra crossing/Water supplypoint/Pipi Line/Telefhone line and riser to feeder pilar, polesetc.

Mtr 200 Mtr 0

3

Boring for Laying of 150mm nominal bore (outer side dia:Min 163.9mm & Max. 166.5mm, Waii thickness: 5.40mm,21.30Kg/mtr.) heavy duty (C-Class) make best quality GIPIPE direct into the earth at a depth of 1100 mm below theground surface without affecting the existing road by manualdigging / drilling either horizontally or diagonally as requiredfor road crossing/ Water supply line/Telcomunication line/GasPipe line crossing etc. as per direction of Engineer- In Charge.

Mtr 0 Mtr 160

4Supply of 160mm outer diameter HDPE pipe( PE-80 grade) ofworking presure 6 kgf /sq.cm. having minimum wall thickness9.1 to 10.3 mm.

Mtr 0 Mtr 0

SCHEDULE - "C" (33KV LINE, UG Cable)

1

207

Gross Total



Description of Item

5

Laying of 3 phase,3 core 300 sq.mm. 33 KV XLPE insulatedpower cable below the road surface through HDPE piipe byAll Terrain Horizontal Directional Dilling / Digging Machineacross & along the road and road crossing without affectingthe existing Road Surface at a depth of minimum 1100 mm. oras per site requirement of TSECL depending on approvedroute survey with supply of HDPE Pipe .

Mtr 0 Mtr 200

6

Erection, fitting-fixing of 150 mm dia GI PIPE of differentlength as per engineering requirement above groud level: for Rising of cable to pole/ feeder pillar /transformer and fitting -fixing on pole,cross arm by MS Clamp and nut and bolts(including supply of Clamp & Nut-Bolts) as required.

Mtr 0 Mtr 40

7

Laying and Commissioning of 1 no, 3 Core, 300sqmm, 19/33KV, XLPE insulated armoured power cable direct into earthincluding excavation of earth upto a depth of 1200mm (Widthof the trench 60 cm.) including 1st class brick protection oftwo layer flat brick soling , 300 mm. sand (River sand)cushioning and refilling and ramming the excavated soil asper direction of Engineer in charge.

Mtr 0 Mtr. 2600

8

Laying and Commissioning of 3 Core, 19/33 KV,300 Sq.mm. XLPE insulated power cable below the road surfacethrough already laid GI PIPE without affecting roadsurface at a depth of minimum 1100 mm or as per siterequirement of TSECL depending on approved layout.

Mtr 0 Mtr 160

9

Laying and Commissioning of 3 Core, 19/33 KV,300 Sq.mm. XLPE insulated power cable above the ground level asrisers to poles, transformer & feeder pillar through GI PIPEas per site requirement and approved layout.

Mtr 0 Mtr 40

207

Gross Total



Description of Item

10Supply & jointing of Outdoor type heat shrink cable endtermination kit for 19/33 KV(E), 3-core,300 Sq.mm. XLPEinsulated Cable.

Nos 5 Nos 5

11Supply & jointing of Indoor type heat shrinkable endtermination kit for 19/33 KV(E), 3-core, 300 Sq.mm. XLPEinsulated Cable.

Nos 2 Nos 1

12Supply & joints of straight Through heat shrink cable typejointing kit for 33 KV XLPE insulated cable, 300 Sq.mm. Size.

Nos 16 Nos 16

13

Manufacturing,Construction and Erection of T-shapedPillar(made of pre-cast RCC) for cable route ID MARKINGengraved with caption "33 KV U.G.LINE"/"STRAIGHTTRHOUGH JOINT" of size(Pillar-3 ft. X 0.33 ft. X 0.33 ft.)and (T-section-1 ft.X0.33 ft.) by excavating earth includingrequired painting of the of the engraved caption in black overyellow background as per technical requirement, direction ofthe Engineer-in-Charge. The Pillar shall be embedded in earthby 1.5 ft.

Nos 18 Nos 18

Supply & erection of fire fighting equipments with completeaccessories .

a) G.I bucket - 10 ltrs capacity with wooden / iron stand. No. 6 No. 6

b) Portable fire extinguisher using CO2 with pressureindicator: -5Kg.

No. 3 No. 3

c) ABC powder fire extinguisher "Mono Ammoniumphosphate".i) 5- Kg No. 2 No. 2ii) 2- Kg No. 2 No. 2

15Supply, erection, testing & commissioning of 100 KVA,11/0.43 KV, DY- 11 distribution transformer for station load.

No. 1 No. 1

14

209

Gross Total



Description of Item

16Supply & erection of 7.5 Mtr long GI support (heavy dutytype) having bottom length 4 mtr. of dia 65 mm and upperlength of 3 mtr. and 40 mm. dia.

No. 16 No. 16

17Supply & erection of Switchyard lighting complete with250W, 230V, HPSV luminaries with switchgear complete.

Unit 12 Unit 12

18 Supply of Shock treatment chart (Laminated ) No. 2 No. 019 Supply of Artificial respirator No. 2 No. 0

20Supply Rubber insulating mat at 15 KV tested of size (1X2)mtr.

No. 8 No. 0

21Supply of Oill filtration plant of capacity 250 G.P.H.(NIRMAL BRAND / John Fowler).

No. 1 No. 0

22Supply of Hand driven Insulation Tester 5KV (WACOmake),10000 Mohm minimum.

No. 1 No. 0

23Supply of Hand driven Insulation Tester 2.5KV (WACOmake),10000 Mohm minimum.

No. 1 No. 0

2433 KV discharge Rod of 3 section made of fibre glass tubecomplete with all accessaries as per specification.

Set 2 Set 0

25Crimping tool AAKASH-100 Capacity 6 mmsqr- 400 mm sqr.Weight 5.8 Kg.

No. 1 No. 0

26Supply of 40mm dia hot Dip perforated G.I pipe of length 3mtr and providing earthing as per latest ISS: at 33 KV &11KV switch yard.

No. 12 No. 12

27Supply and laying of GI wire, 50 X 6 mm size for interconnection of earth electrodes and earthing terminals ofequipments, structures as required for earthing.

Mtr. 20 No. 12

Supplying and fixing of PVC casing and capping in/c. allaccessories as required (Make : - Presto - plast / Precision)

a) 25 mm X 10 mm. Mtr. 0 Mtr. 180 b) 40 mm X 20 mm. Mtr. 0 Mtr. 60

1

SCHEDULE-"D" (Internal electrification of control room

209

Gross Total



Description of Item

Supplying and drawing of PVC insulated copper conductorcable in existing PVC casing -capping / conduit in/c. necessaryconnection as required. (Make: - Havell's / National / Plaza.)

a) 2 X 1.5 Sq. mm. Mtr. 0 Mtr. 300 b) 2 X 4 Sq. mm. Mtr. 0 Mtr. 100 c) 2 X 6 Sq. mm. Mtr. 0 Mtr. 50

Supplying and fixing of accessories for PVC casing andcapping in/c. necessary connection as required. Make: -Anchor / Precision / Cona (Nice) / SSK / J.J. Deluxe (Fancy).

a) Ceiling rose. No. 0 No. 20 b) Angle lamp holder. No. 0 No. 20 c) 5/6 Amp. piano switch. No. 0 No. 50 d) 5/6 Amp. socket. No. 0 No. 8 e) 15/16 Amp.piano switch. No. 0 No. 5 f) 15/16 Amp. 5 pin socket. No. 0 No. 5 g) Ding dong call bell. No. 0 No. 1

4

Supplying and fixing of 415 volt, 63 amp. TPN main switch(Rewireable) front handle in/c. drilling holes on wooden boardand connection as required. (Make: - Havells / HPL /Standard).

No. 0 No. 2

5

Supplying and fixing of 6 ways metal enclosure for 240/415Volts MCB (SP/SPN/DP/FP) complete with necessary bus bar,earth bar, neutral link etc. including connection as required.(Make: - Havells / HPL / Standard).

No. 0 No. 2

6

Supplying and fixing of 5 to 32 Amps. rating 240 Volts 'G'Series MCB of single pole in the existing MCB DB completewith connection etc. as required. (Make: - Havells / HPL /Standard).

No. 0 No. 10

2

3

211

Gross Total



Description of Item

7Providing earthing with 40 mm dia. GI perforated pipe of 4.5

mtr. long with masonary enclosure on top etc. as required. No. 0 No. 2

8Extra for using salt and charcoal for pipe earth elctrode as

required. Set. 0 Set. 2

9Providing and fixing 8 swg GI wire on surface or in conduit

pipe for loop earthing. Mtr. 0 Mtr. 10

10Providing and laying earth connection from earth electrode

with 8 swg GI wire / copper wire in 15 mm dia. G.I. pipe fromearth electrode as required.

Mtr. 0 Mtr. 12

11Supplying and drawing of 4 sq. mm. aluminium conductor

wire for loop earthing including connection as required. Mtr. 0 Mtr. 150

12

Supplying and fixing of single box type FTL fittingscomplete with 1 no. 40 / 36 watt copper ballast, 40/36 wattflurosent tube, starter, holder, pf improving capacitor etc. in/c.connection as required. (Make: - Phillips / Crompton / Bajaj).

No. 0 No. 10

13

Supplying and fixing of double box type T 5 rated energyefficent FTL fittings complete with 2 nos. 40 / 36 watt copperballast, 2 nos. 40/36 watt flurosent tube, starter, holder, pfimproving capacitor etc. in/c. connection as required. (Make: -Phillips / Crompton / Bajaj).

No. 0 No. 8

14

Supplying and fixing of ceilling luminaries with 2 nos. PLS11 Watt lamp and mirror optics including necessaryconnection as required. (Make: - Phillips, Cat no.-FCS - 31 /211).

No. 0 No. 2

Supplying and fixing of accessories for PVC casing andcapping in/c. necessary connection as required.

0 0

a) 102 mm X 102 mm, size wooden formica board withbakelite cover.

No. 0 No. 30

211

Gross Total



Description of Item

b) 102 mm X 178 mm, size wooden formica board withbakelite cover.

No. 0 No. 8

c) 152 mm X 203 mm, size wooden formica board withbakelite cover.

No. 0 No. 4

d) 203 mm X 300 mm, size wooden formica board withbakelite cover.

No. 0 No. 6

e) 254 mm X 300 mm, size wooden formica board withbakelite cover.

No. 0 No. 4

16Supplying and fixing of 300 mm sweep exhaust fan including

necessary connection as required. (Make: - Crompton /Khaitan / USHA / Orient).

No. 0 No. 4

17Supplying and fixing of necessary shutter for 300 mm exhaust

fan in the existing whole including necessary painting etc. asrequired.

No. 0 No. 4

18

Supplying and fixing of 1200 mm sweep ceilling fanincluding fixing of regulator and wiring in down rod ofstandard length etc. as required. (Make: - Crompton / Khaitan /Orient / USHA).

No. 0 No. 12

19Supplying and fixing of 18 watt CFL in the existing angle

holder. (Make: - Phillips / Bajaj / Orpat. No. 0 No. 10

Earth work in excavation over areas (exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m and lift upto 1.5m, disposedearth to be levelled and neatly dressed.

-All kinds of soilBy manual means cum 0 cum 0

15

SCHEDULE -"E" R.C.C FRAMED CONTROL ROOM BUILDING

SUBHEAD- EARTHWORK

1

213

Gross Total



Description of Item

Earth work in excavation in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplusexcavated soil as directed, within a lead of 50 m.

-All kinds of soilBy manual means cum 0 cum 0Extra for additional lift of 1.5m or part thereof-All kinds of soil cum 0 cum 0

Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cmin depth, consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift upto 1.5 m.

-All kinds of soil cum 0 cum 0

5

Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading to requiredslope, ramming, consolidating and compacting each layer byusing plate compactor or by any suitable method complete.

cum 0 cum 0

Supplying chemical emulsion in sealed containers includingdelivery as specified.Chlorpyriphos/Lindane emulsifiable concentrate of 20% Litre 0 Litre 0

2

3

4

6

213

Gross Total



Description of Item

Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding thecost of chemical emulsion) and continuous chemical barrierunder and alround the column pits, wall trenches, basementexcavation, top surface of plinth filling, junction of wall andfloor, along the external perimeter of building, expansionjoints, over the top surface of consolidated earth of whichapron is to be laid, surroundings of pipes and conduits etc.complete as per specification. The work should be carried outas per IS: 6313 (Part II)- Latest revision [Plinth area of thebuilding at ground floor only shall be measured for payment]

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. sqm 0 sqm 0

Providing and laying in position cement concrete of specifiedgrade excluding the cost of centring and shuttering -

-All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size)

cum 0 cum 0

1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 40mm nominal size)

cum 0 cum 0

1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20mm nominal size)

cum 0 cum 0

Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centring, shuttering,finishing and reinforcement--All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 0

7

SUBHEAD-CEMENT CONCRETE WORKS

8

SUBHEAD-R.C.C WORK

9

215

Gross Total



Description of Item

Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and skirtingcourses, fillets, columns, pillars, piers, abutments, posts andstruts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement-

In walls (any thickness), including attached pilasters,buttresses, piers, abutments etc.1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 0

In plinth and skirting courses, fillets, columns, pillars, postsand struts1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 1.01

Reinforced cement concrete work in beams, suspended floors,roofs having slope upto 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement-

RCC work in suspended floors, roofs having slope upto 15°landings, balconies, shelves and chajjas.1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 0

RCC work in beams, lintels, bands, plain window sills,staircases and spiral staircases excluding precast spiralstaircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 0

Providing and laying upto floor five level reinforced cementconcrete work in kerbs, steps and the like excluding the cost ofcentring, shuttering, finishing and reinforcement-

10

11

12

215

Gross Total



Description of Item

1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 0.47

13

Providing, hoisting and fixing upto floor five level precastreinforced cement concrete work in shelves including settingin cement mortar 1:3(1cement : 3 fine sand), cost of requiredcentring, shuttering, finishing with neat cement punning onexposed surfaces complete, but excluding cost ofreinforcement with cement concrete 1:2:4 (1cement : 2 finesand : 4 graded stone aggregate 20mm nominal size).

cum 0 cum 0.83

Centering shuttering including struttings, propping etc. andremoval of form work for:Foundations, footings, bases for columns etc. for massconcrete with timber plank

sqm 0 sqm 39.65

Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc. using shuttering ply

sqm 0 sqm 0

Suspended floors, roofs, landings, balconies and accessplatform with 12 mm thick shuttering ply

sqm 0 sqm 4.71

Lintels, beams, plinth beams, girders, bressumers andcantilevers with shuttering ply

sqm 0 sqm 73.76

Columns, Pillars, Piers, Abutments, Posts and Struts withshuttering ply

sqm 0 sqm 46.7

Spiral staircases (including landing) - cast-in-situ with ply sqm 0 sqm 17.5

14

217

Gross Total



Description of Item

15

Providing, hoisting and fixing upto floor five level precastreinforced cement concrete work in mouldings as in cornices,windows sills etc. including setting in cement mortar1:3(1cement : 3 fine sand), cost of required centring,shuttering, finishing smooth with 6mm thick cement plaster1:3 (1cement : 3 fine sand) on exposed surfaces complete, butexcluding cost of reinforcement with cement concrete 1:2:4(1cement : 2 fine sand : 4 graded stone aggregate 20mmnominal size).

cum 0 cum 0.44

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all completeupto floor five level.Thermo-Mechanically Treated bars/ Cold twisted deformedsteel bars

kg 0 kg 1815.07

First class brick work in foundation and plinth including costof all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). Cum. 0 Cum. 17.56First class brick work in superstructure above plinth level &upto floor-five level including cost of all materials as requiredcomplete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). Cum. 0 Cum. 0

19Half brick masonry work with first class bricks in foundationand plinth including cost of all materials as required complete:-

Sqm. 0 Sqm. 27.17

Half brick masonry work with first class bricks insuperstructure upto floor five level including cost of allmaterials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). Sqm. 0 Sqm. 17.996

16

SUBHEAD- BRICK WORK

17

18

20

217

Gross Total



Description of Item

Extra for providing & placing in position 2 nos 6mm dia MSbars at every 6th course of full brick masonry work includinganchorage in joints of 75mm in each side in superstructure forall level including cost of all materials as required complete:-

In cement mortar 1:4 ( 1 cement : 4 fine sand ). Cum. 0 Cum. 0

Extra for providing & placing in position 2 nos 6mm dia MSbars at every 4th course of half brick masonry work includinganchorage in joints of 75mm in each side in superstructure forall level including cost of all materials as required complete:-

In cement mortar 1:4 ( 1 cement : 4 fine sand ). Sqm. 0 Sqm. 17.996

Providing wood work in frames of doors, windows, clerestorywindows and other frames, wrought framed and fixed inposition :Karai wood Cum 0 Cum 0.25

Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core of blockboard construction with frame of 1st class hard wood and wellmatched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws.

Sqm 0 Sqm 6.3

Providing and fixing M.S. grills of required pattern in framesof windows etc. with M.S. flats, square or round bars etc. allcomplete.

Fixed to openings /wooden frames with rawl plugs screws etc. Kg 0 Kg 625

21

22

SUBHEAD- WOOD WORK

23

24

25

219

Gross Total



Description of Item

26

Providing 40 × 5 mm flat iron hold fast 40 cm long includingfixing to frame with 10 mm diameter bolts, nuts and woodenplugs and embedding in cement concrete block 30 × 10 × 15cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stoneaggregate 20mm nominal size)

No 0 No 18

27

Providing and fixing chromium plated brass 100 mm morticelatch and lock with 6 levers and a pair of lever handles withnecessary screws etc. complete (best make of approvedquality).

No 0 No 3

Providing and fixing aluminium sliding door bolts ISI markedanodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nutsand screws etc. complete :300x16 mm No 0 No 6Providing and fixing aluminium tower bolts ISI markedanodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade withnecessary screws etc. complete :300x10 mm No 0 No 4Providing and fixing aluminium handles ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade with necessaryscrews etc. complete :125 mm No 0 No 4

Providing and fixing aluminium hanging floor door stopper ISImarked anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour and shadewith necessary screws etc. complete.

Twin rubber stopper No 0 No 4

28

29

30

31

219

Gross Total



Description of Item

32

Providing and fixing factory made P.V.C. door frame of size 50x47mmwith a wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet mitred at corners and joined with 2 Nos. of 150mm long brackets of15x15mm M.S. square tube, the vertical door profiles to be reinforced with19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather sealto be provided through out the frame . The door frame to be fixed to thewall usuing MS screws of 65/100 mm size complete as per manufacturers'specification and direction of Engineer-In-Charge.

mtr. 0 mtr. 5

Providing and fixing to existing door frames.

30mm thick factory made solid both side prelam panel PVC doorshutter consisting of frame made out of M.S. tubes of 19 gaugethickness and size of 19mm x 19mm for styles, top & bottom rails.M.S. frame shall have a coat of steel primers of approved makeand manufacture . M.S. frame covered with 5mm thick heatmoulded prelam PVC ‘C channel of size 30mm thickness, 70mmwidth out of which 50mm shall be flat and 20mm shall be taperedin 45degree angle on either side forming stiles; and 5mm thick,95mm wide PVC sheet out of which 75mm shall be flat and 20mmshall be tapered in 45 degree on the inner side to form top andbottom rail and 115mm wide PVC sheet out of which 75mm shallbe flat and 20mm shall be tapered on both sides to form lock rail.Top, button and lock rails shall be provided either side of thepanel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet beprovided as gap insert for top rail & bottom rail, panelling of 5mmthick both side Prelam PVC sheet to be fitted in the M.S. framewelded/ sealed to the stiles & rails with 7mm (5mm+2mm) thick x15mm wide PVC sheet beading on inner side, and joined togetherwith solvent cement adhesive. An additional 5mm thick PVC stripof 20mm width is to be stuck on the interior side of the ‘C Channelusing PVC solvent adhesive etc. complete as per direction ofEngineer-in-charge. manufacturer’s specification & drawing.

sqm 0 sqm 233

221

Gross Total



Description of Item

0 0

34

Providing structural steel work in single section fixed with orwithout connecting plate including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primerall complete as required.

Kg. 0 Kg. 200

35

Providing and fixing in position collapsible steel shutters withvertical channels 20x10x2mm at 100 mm centre to centre andbraced with flat iron diagonals 20x5mm size with top andbottom rail of T-iron 40x40x6mm with 40mm dia. steelpulleys & with riveted bolts, nuts, locking arrangement,stoppers, handles, hold fast /anchor bolt including embeddingin cement concrete of required grade for fixing in position, allnecessary fittings, including applying a priming coat ofapproved steel primer etc. complete as required.

Sqm. 0 Sqm. 5.25

Providing and fixing 1mm thick M.S. sheet door with frame of40x40x6mm angle iron and 3mm M.S. gusset plates at thejunctions and corners, & with cleats with bolts & nuts, rivets,locking arrangement, handles, hooks & eyes, pinlets includingembedding in cement concrete of required grade for fixing inposition, all necessary fittings, including applying a primingcoat of approved steel primer etc. complete as required:-

Using M.S. angels 40x40x6 mm for diagonal braces. Sqm. 0 Sqm. 2.1

SUBHEAD- STEEL WORK

36

221

Gross Total



Description of Item

Supplying and fixing rolling shutters of approved make, madeof required size M.S. laths interlocked together through theirentire length and jointed together at the end by end locksmounted on specially designed pipe shaft with brackets, sideguides and arrangements for inside and outside locking withpush and pull operation complete including the cost ofproviding and fixing necessary 275mm long wire springs gradeNo.2 and M.S. top cover of required thickness for rollingshutters & with handles, hold fast including embedding incement concrete of required grade required for fixing inposition, all necessary fittings, including applying of approvedsteel primer etc. complete as required:-

80xl.25mm M.S. laths with 1.25 mm thick top cover. Sqm. 0 Sqm. 0

38Providing and fixing ball bearing for rolling shutters (exceeding 10 sqm area ) of approved make complete asrequired.

Each 0 Each 0

39

Providing and fixing circular/ Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm, 73mmheight, top lid of 1.5mm thick M.S. sheet with its top surfacehacked for proper bonding, top lid shall be screwed into thecast iron/ M.S. sheet box by means of 3.3mm dia. roundheaded screws, one lock at the corners. Clamp shall bemade of 12mm dia M.S. bar bent to shape, including paintingthe exposed portion as per standard drawing complete asrequired (provided incase of low ceiling height).

Each 0 Each 0

Steel work welded in built up section/framed work includingcutting, hoisting, fixing in position and applying a primingcoat of approved steel primer using steel etc. complete asrequired:-In grating, frames, guard bar, railing, brackets, gates andsimilar works, all complete.

Kg. 0 Kg. 6.86

37

40

223

Gross Total



Description of Item

Providing and laying polished vitrified floor tiles in differentsizes ( thickness to be specified by the manufacturer ) withwater absorption less than 0.08 % and conforming to IS :15622 of approved make in all colours, shades over 20 mmthick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand )jointed with ordinary cement slurry including pointing withwhite cement mixed with pigment of matching shadecomplete.Size of tile 60x60 cm sqm 0 sqm 10.5

Providing and fixing precast chequered cement concrete tiles22 mm thick, laid in footpath & courtyard, on 20 mm thick bedof cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed withneat cement slurry mixed with pigment to match the shade oftiles including rubbing and polishing complete.

In dark shade using ordinary cement sqm 0 sqm 20

43

Providing and fixing 1st quality ceramic glazed wall tilesconforming to IS : 15622 ( thickness to be specified by themanufacturer ) of approved make in all colours, shades exceptburgundy, bottle green, black of any size as approved byEngineer-in-charge in skirting, risers of steps and dados over12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 finesand ) jointed with ordinary cement slurry including pointingwith white cement mixed with pigment of matching shadecomplete.

sqm 0 sqm 40

SUBHEAD-FLOORING WORK

41

42

223

Gross Total



Description of Item

44

Providing and laying 1st quality ceramic glazed floor tiles 300x 300 mm conforming to IS : 15622 ( thickness to be specifiedby the manufacturer ) of approved make in colours, shadessuch as white, ivory, grey, fume red, brown over 20 mm thickbed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointedwith ordinary cement slurry including pointing with whitecement mixed with pigment of matching shade complete.

sqm 0 sqm 7.5

Providing and fixing Kota stone in floors over 20 mm thickbed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointedwith ordinary cement slurry including pointing with ordinarycement mixed with pigment of matching shade, includingrubbing and polishing complete.

Kota stone slab 30mm thick sqm 0 sqm 90

Providing and fixing aluminium work for doors, windows,ventilators, stair railing including hand rail and partitionswith extruded built up standard tubular sections/appropriate Z sections and other sections of approvedmake conforming to IS: 733 and IS : 1285, fixed with rawlplugs and screws or with fixing clips, or with expansionhold fasteners including necessary filling up of gaps atjunctions, at top, bottom and sides with requiredPVC/neoprene felt etc. aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, allcomplete as per architectural drawing and the direction ofEngineer-in-charge. (Glazing and paneling to be paid forseparately) :-For fixed portion of approved quality:-

45

SUBHEAD-ALUMINIUM WORK

46

225

Gross Total



Description of Item

Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15).

Kg. 0 Kg. 150

For shutters/ sliding shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / rollers andmaking provision for fixing fittings wherever requiredincluding the cost of PVC / neoprene gasket required ofapproved quality ( Fittings shall be paid for separately ):-

Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15).

Kg. 0 Kg. 125

Providing and fixing glazing of approved quality in aluminiumdoors, windows, ventilator, shutters and partition frames withPVC / neoprene gasket etc. complete as per architecturaldrawing and the direction of Engineer-in-charge :-

With glass/ float glass panes of 5.5 m thickness ( weight notless than 13.50 kg / sqm )

Sqm. 0 Sqm. 6.3

With glass/ float glass panes of 4.0 m thickness ( weight notless than 10.0 kg / sqm )

Sqm. 0 Sqm. 17.4

Providing and fixing double action hydraulic floor spring ofapproved brand and manufacture ( conforming to IS : 6315 )for aluminium doors including cost of cutting floors asrequired, embedding in floors and cover plates etc. complete asper direction of the Engineer-in-charge:-With stainless steel cover plate. Each 0 Each 1

47

48

49

225

Gross Total



Description of Item

Providing and fixing aluminium work consisting of tee / anglesections, of approved make conforming to IS : 733 in framesof false ceiling including aluminium angle cleats withnecessary C.P. brass / stainless steel sunk screws, aluminiumperimeter angles fixed to wall with rawl plugs @ 450 mmcentre to centre and fixing the frame work to 6 mm dia G.I.level adjusting hangers with necessary cadmium platedmachine screws all complete as per architectural drawing andthe direction of Engineer-in-charge ( level adjusting hangers,ceiling cleats and expansion hold fasteners to be paid forseparately ):-

Anodised aluminium (anodised transparent or dyed to requiredshade according to IS : 1868 , minimum anodic coating ofgrade AC 15 ).

Kg. 0 Kg. 8.75

51

Providing and filling the gap in between aluminium frame andadjacent RCC / brick work by providing weather siliconsealant over backer rod of approved quality etc. complete asper architectural drawing and direction of the Engineer-incharge:- (i) Upto 5 mm depth and 5 mm width.

Metre 0 Metre 50

Providing and fixing 12 mm thick prelaminated three layermedium density (exterior grade ) particle board grade-I, type IIconforming to IS : 12823 bonded with phenol formaldehydesynthetic resin, of approved brand and manufacture inpanelling fixed in aluminium doors, windows, shutters andpartition frames with C.P. brass / stainless steel screws allcomplete as per architectural drawing and the direction ofEngineer-in-charge :-Prelaminated particle board of approved quality withdecorative lamination on both side.

Sqm. 0 Sqm. 4.5

50

52

227

Gross Total



Description of Item

Providing and fixing aluminium casement windows fastener ofrequired length for aluminium windows with necessary screwsetc. of approved quality complete as per direction of Engineer-in-charge:-Anodised aluminium of grade AC 15 ). Each 0 Each 10Providing and fixing aluminium tubular handle bar of 32 mmouter dia, 3.0 mm thick and 2100 mm long with Stainless Steelscrews etc. of approved quality complete as per direction ofEngineer-in-charge:-Anodised aluminium of grade AC 15 ). Each 0 Each 3

55

Providing and fixing 100 mm brass locks ( best make ofapproved quality ) with 6 levers without pair of handles foraluminium doors including necessary cutting and making goodetc. complete as per direction of Engineer-in-charge.

Each 0 Each 3

0 0Providing and fixing on wall face unplasticised RigidPVC rain water pipes (working pressure 4 kg / cm2)conforming to IS : 13592 Type A including jointing withseal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion:

0 0

Single socketed pipe - 110 mm OD m 0 m 50Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised Rigid PVCrain water pipes conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion:Coupler110 mm each 0 each 5Bend 87.5°110mm each 0 each 10

53

54

SUBHEAD- ROOFING WORK

56

57

227

Gross Total



Description of Item

Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain water pipes bymeans of 50x50x50mm hard wood plugs, screwed withM.S. screws of required length including cutting brick workand fixing with cement mortar 1 : 4 (1cement : 4 fine sand)making good the wall etc. complete.

110mm each 0 each 30

12 mm cement plaster in single layer including cost ofmaterials required and finishing even and smooth and curingcomplete.In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm 0 sqm 015 mm cement plaster in single layer including cost ofmaterials required and finishing even and smooth and curingcomplete.In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm 0 sqm 282.62

6 mm cement plaster in single layer including cost of materialsrequired and finishing even and smooth and curing complete.

In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) sqm 0 sqm 58.3162 Neat cement punning. sqm 0 sqm 5.91

63Extra for providing and mixing water proofing material incement plaster work in proportion recommended by themanufacturers.

kg 0 kg 50

64Providing and applying plaster of paris putty of 2 mmthickness over plastered surface to prepare the surface evenand smooth complete.

sqm 0 sqm 460

65Applying one coat of cement primer of approved brand andmanufacturer on wall surface complete.

sqm 0 sqm 725.82

58

SUBHEAD- FINISHING WORK

59

60

61

229

Gross Total



Description of Item

66

Finishing walls with premium acrylic smooth exterior paint ofrequired shade of approved brand and manufacture on newwork ( two or more coats applied @ 1.43 kg/10 sqm ) over andincluding base coat water proofing cement paint applied @2.20 kg/10 sqm complete.

sqm 0 sqm 225

Applying priming coat:With ready mixed pink primer of approved brand andmanufacture on wood work ( hard & soft wood ).

sqm 0 sqm 15

With ready mixed red oxide zinc chromate primer of approvedbrand and manufacture on steel, galvanised iron / steel work.

sqm 0 sqm 50

Finishing with epoxy paint ( two or more coats ) of approvedbrand and manufacture at all locations prepared and applied asper manufacturer's specification on new work includingappropriate priming coat, preparation of surface etc. complete.

On steel work sqm 0 sqm 50

69Wall painting with plastic emulsion paint ( two or more coats )of required colour of approved brand and manufacture on newwork to give an even shade.

sqm 0 sqm 650.82

70Painting with black anticorrosive bitumastic paint ( two ormore coats ) of approved brand and manufacture on new workto give an even shade.

sqm 0 sqm 35.4

Providing and fixing water closet squatting pan (Indian typeW.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre lowlevel white P.V.C. flushing cistern with manually controlleddevice (handle lever) conforming to IS : 7231, with allfittings and fixtures complete including cutting and makinggood the walls and floors wherever required :

67

68

SUBHEAD- SANITARY WORK

71

229

Gross Total



Description of Item

White Vitreous china Orrisa pattern W.C. pan of size 580x440mm with integral type foot rests.

each 0 each 1

Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever), conforming to IS :7231, with all fittings and fixtures complete including cuttingand making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid each 0 each 1

Fixing white vitreous china flat back half stall urinal ofsize 580x380x350mm with white PVC automatic flushingcistern, with fittings, standard size C.P. brass flush pipe,spreaders with unions and clamps (all in C.P. brass) withwaste fitting as per IS : 2556, C.I. trap with outlet gratingand other couplings in C.P. brass including painting offittings and cutting and making good the walls and floorswherever required :

Single half stall urinal with 5 litre P.V.C. automatic flushingcistern.

each 0 each 2

Providing and fixing wash basin with C.I. brackets, 15 mmC.P. brass pillar taps,32 mm C.P. brass waste of standardpattern, including painting of fittings and brackets, cuttingand making good the walls wherever require :

White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar taps.

each 0 each 2

75Providing and fixing white vitreous china pedestal for washbasin completely recessed at the back for the reception of pipes and fittings.

each 0 each 1

Providing and fixing P.V.C. waste pipe for sink or wash basinincluding P.V.C. waste fittings complete.

72

73

74

76

231

Gross Total



Description of Item

Flexible pipe32 mm dia each 0 each 4

77Providing and fixing 100 mm sand cast Iron grating for gullytrap.

each 0 each 4

78

Providing and fixing 600x450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thickhard board ground fixed to wooden cleats with C.P. brassscrews and washers complete.

each 0 each 2

79

Providing and fixing 600x120x5mm glass shelf with edgesround of supported on anodised aluminium angle frame withC.P. brass brackets and guard rail complete fixed with 40 mmlong screws, rawl plugs etc., complete.

each 0 each 2

Providing and fixing terminal guard:100 mmSand cast iron S&S as per IS - 3989 each 0 each 2Providing and fixing PTMT towel rail complete with bracketsfixed to wooden cleats with CP brass screws with concealedfitting arrangement of approved 450mm long towel rail withtotal length of 495mm, 78mm wide and effective heightquality and colour.600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not less than190gms.

each 0 each 2

82

Providing and fixing PTMT liquid soap container 109mmwide, 125mm high and 112mm distance from wall of standardshape with bracket of the same materials with snap fittings ofapproved quality and colours weighing not less than 105 gms

each 0 each 2

76

80

81

231

Gross Total



Description of Item

Providing, fixing and laying rigid UPVC pipes conforming toIS :4985 jointing with couplers, of same class conforming toIS : 10124 ( Pt-II ) with solvent cement conforming to IS :14182 including testing of joints complete ( but excluding thecost of specials like bend, tees etc. which will be paidseparately ) as per chapter 20 of CPWD specification anddirection of the Engineer - in - charge.

Class - 3 ( working pressure 6.0 kg / cm2)90 mm OD Mtr. 0 Metre 45110 mm OD Mtr. 0 Metre 25

Providing, fixing and laying fabricated UPVC bend of requireddegree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 )with solvent cement conforming to IS : 14182 includingtesting of joints complete as per chapter 20 of CPWDspecification and direction of the Engineer - in - charge.

90 mm OD No 0 No 10110 mm OD No 0 No 8Providing, fixing and laying fabricated UPVC equal teeconforming to IS : 10124 ( Part 5 ) with solvent cementconforming to IS : 14182 including testing of joints completeas per chapter 20 of CPWD specification and direction of theEngineer - in - charge.90 x 90 mm dia No 0 No 7110 x 110 mm dia No 0 No 6Providing, fixing and laying fabricated UPVC end capconforming toIS : 10124 ( Part 4 ) with solvent cementconforming to IS : 14182 including testing of joints completeas per chapter 20 of CPWD specification and direction of theEngineer - in - charge.90 x 90 mm dia No 0 No 3110 x 110 mm dia No 0 No 2

83

84

85

86

233

Gross Total



Description of Item

0 0

Providing and fixing G.I. pipes complete with G.I. fittings andclamps, including cutting and making good the walls etc.

Internal work - Exposed on wall.15 mm dia. nominal bore metre 0 metre 1520 mm dia. nominal bore metre 0 metre 20Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching and refilling etc.External work25 mm dia. nominal bore metre 0 metre 2040 mm dia. nominal bore metre 0 metre 50Making connection of G.I. distribution branch with G.I. mainof following sizes by providing and fixing tee, includingcutting and threading the pipe etc. complete :25 to 40 mm nominal bore each 0 each 2

90Making chases upto 7.5x7.5 cm in wails including makinggood and finishing with matching surface after housing G.I.pipe etc.

metre 0 metre 15

91

Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked with coverand suitable locking arrangement and making necessary holesfor inlet, outlet and overflow pipes but without fittings and thebase support for tank.

per litre 0 per litre 1000

Providing and fixing C.P. brass bib cock of approved qualityconforming to IS:893115 mm nominal bore each 0 each 2Providing and fixing C.P. brass long body bib cock ofapproved quality conforming to IS standards and weighing notless than 690 gms.15mm nominal bore. each 0 each 2

SUBHEAD- WATER SUPPLY INSTALLATION

87

88

89

92

93

233

Gross Total



Description of Item

Providing and fixing C.P. brass stop cock (concealed) ofstandard design and of approved make conforming to IS:8931.

15 mm nominal bore. each 0 each 4Providing and fixing ball valve (brass) of approved qualitycomplete :15 mm nominal bore each 0 each 320 mm nominal bore each 0 each 225 mm nominal bore each 0 each 2Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end):40 mm nominal bore each 0 each 1

97Providing and fixing gun metal non-return valve of approvedquality (screwed end):Vertical 0 040 mm nominal bore each 0 each 1Providing and fixing uplasticised PVC connection pipe withbrass unions :45 cm length 0 015 mm nominal bore each 0 each 6Providing and fixing G.I. Union in G.I. pipe including cuttingand threading the pipe and making long screws etc. complete(New work)

15 mm nominal bore each 0 each 4




Providing and fixing PTMT grating of approved quality andcolour.Circular type.100 mm nominal dia. each 0 each 4

94

95

96

98

99

100

101

235

Gross Total



Description of Item

Constructing brick masonry chamber for underground C.I.inspection chamber and bends with 1st class bricks in cementmortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (lightduty) 455x610 mm internal dimensions, total weight of coverwith frame to be not less than 38 kg (weight of cover 23 kgand weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1cement :2 fine sand : 4 graded stone aggregate 20 mm nominalsize) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10graded stone aggregate 40 mm nominal size), inside plastering12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand)finished smooth with a floating coat of neat cement on wallsand bed concrete etc. complete as per standard design :

Inside dimensions 455x610 mm and 45 cm deep for singlepipe line :

No 0 No 1

Inside dimensions 500x700 mm and 45 cm deep for pipe linewith one or two inlets :

No 0 No 1

103

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45cm dry brick honey comb shaft with well burnt 2nd classbricks and S.W. drain pipe 100 mm diameter, 1.8 m longcomplete as per standard design.

No 0 No 1

Supplying and fixing C.I. cover without frame for manholes :

500 mm diameter C.I. cover (medium duty) the weight of thecover to be not less than 58 kg.

No 0 No 2

SUBHEAD- SEWERAGE & DRAINAGE WORK

102

104

235

Gross Total



Description of Item

Earth work in excavation over areas (exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m and lift upto 1.5m, disposedearth to be levelled and neatly dressed.


Earth work in excavation in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplusexcavated soil as directed, within a lead of 50 m.


Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cmin depth, consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift upto 1.5 m.

-All kinds of soil cum 0 cum 20

4

Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading to requiredslope, ramming, consolidating and compacting each layer byusing plate compactor or by any suitable method complete.

cum 0 cum 2.5

3

SUBHEAD-CEMENT CONCRETE WORKS

SCHEDULE -"F" R.C.C. FRAMED BOUNDARY WALL

Total Length of Boumdary Wall = 45.00 Metre.

1

2

237

Gross Total



Description of Item

Providing and laying in position cement concrete of specifiedgrade excluding the cost of centring and shuttering -

-All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size)

cum 0 cum 8

Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centring, shuttering,finishing and reinforcement--All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 7.25

Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and skirtingcourses, fillets, columns, pillars, piers, abutments, posts andstruts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement-

In walls (any thickness), including attached pilasters,buttresses, piers, abutments etc.1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 4.75

In plinth and skirting courses, fillets, columns, pillars, postsand struts1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 4.5

Reinforced cement concrete work in beams, suspended floors,roofs having slope upto 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement-

5

SUBHEAD-R.C.C WORK

6

7

8

237

Gross Total



Description of Item

RCC work in beams, lintels, bands, plain window sills,staircases and spiral staircases excluding precast spiralstaircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20mm nominal size)

cum 0 cum 6.37

Centering shuttering including struttings, propping etc. andremoval of form work for:Foundations, footings, bases for columns etc. for massconcrete with timber plank

sqm 0 sqm 15

Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc. using shuttering ply

sqm 0 sqm 36

Lintels, beams, plinth beams, girders, bressumers andcantilevers with shuttering ply

sqm 0 sqm 56

Columns, Pillars, Piers, Abutments, Posts and Struts withshuttering ply

sqm 0 sqm 50

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all completeupto floor five level.Thermo-Mechanically Treated bars/ Cold twisted deformedsteel bars

kg 0 kg 1450

First class brick work in foundation and plinth including costof all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). Cum. 0 Cum. 10Half brick masonry work with first class bricks insuperstructure upto floor five level including cost of allmaterials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). Sqm. 0 Sqm. 60

9

11

12

10

SUBHEAD- BRICK WORK

239

Gross Total



Description of Item

Extra for providing & placing in position 2 nos 6mm dia MSbars at every 4th course of half brick masonry work includinganchorage in joints of 75mm in each side in superstructure forall level including cost of all materials as required complete:-

In cement mortar 1:4 ( 1 cement : 4 fine sand ). Sqm. 0 Sqm. 700 0

Steel work welded in built up section/framed work includingcutting, hoisting, fixing in position and applying a primingcoat of approved steel primer using steel etc. complete asrequired:-In grating, frames, guard bar, railing, brackets, gates andsimilar works, all complete.

Kg. 0 Kg. 500

Providing and fixing M.S. grills of required pattern in framesof windows etc. with M.S. flats, square or round bars etc. allcomplete.

Fixed to openings /wooden frames with rawl plugs screws etc. Kg 0 Kg 600

12 mm cement plaster in single layer including cost ofmaterials required and finishing even and smooth and curingcomplete.In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm 0 sqm 101.2515 mm cement plaster in single layer including cost ofmaterials required and finishing even and smooth and curingcomplete.In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm 0 sqm 101.25

18 Neat cement punning. sqm 0 sqm 36

19Applying one coat of cement primer of approved brand andmanufacturer on wall surface complete.

sqm 0 sqm 202.5

Applying priming coat:

13

SUBHEAD- STEEL WORK

14

16

15

SUBHEAD- FINISHING WORK

17

239

Gross Total



Description of Item

With ready mixed red oxide zinc chromate primer of approvedbrand and manufacture on steel, galvanised iron / steel work.

sqm 0 sqm 25

21

Finishing walls with acrylic smooth exterior paint of requiredshade of approved brand and manufacture on new work ( twoor more coats applied @ 1.67 kg/10 sqm ) over and includingbase coat water proofing cement paint applied @ 2.20 kg/10sqm complete.

sqm 0 sqm 202.5

Finishing with epoxy paint ( two or more coats ) of approvedbrand and manufacture at all locations prepared and applied asper manufacturer's specification on new work includingappropriate priming coat, preparation of surface etc. complete.

On steel work sqm 0 sqm 25

Electrical Division No-I,TSECL, Agartala

22

Dy. General Manager

20

Bid Sch.

Schedule of Work

Name of Work:- Implementation of R-APDRP (Part-B) Scheme under Agartala Project(Town Pratapgarh Area): Design,Engineering,Manufacturing, Supply, testing ,Delivery, Erection,Testing at site & commissioning of 33/11 KV, 2X7.5 MVA,Indoor Type Power Sub-Station at NSRCC, Netaji Chowmuhani, Agartala with associated 33KV Underground Rampur Substation- NSRCC S/C Line, 33 KV Bay at Rampur including Control room and boundary wall at NSRCC.

Item Sl. NoDescription of ItemSupply(Agreement)Erection(Agreement)Gross TotalSupply(Execution)Erection(Execution)Gross TotalSupply(To be done)Erection(To be done)Gross TotalSupplyErectionGross Total

UnitQty.RateAmountUnitQty.RateAmountUnitQty.RateAmountUnitQty.RateAmountUnitQty.RateAmountUnitQty.RateAmountUnitQty.RateAmountUnitQty.RateAmount

SCHEDULE-A

1Design, Engineering,manufacturing, Supply, Erection, Testing & commissioning of 33/11KV Power Transformer, Oil immersed, ONAN cooled outdoor type, 3-phase, 50 Hz, Vector Group-Dyn-II, delta-star step down with off load tap changer having range of +10% to -10% in steps of 2.5% each on HV winding with first filling of EHV grade insulating oil as per specification including supply & erection of 90lb rail pole, 3.5mtr long, 2nos for each transformer as rail track etc.as required conforming to relevant ISS as per design drawing detailed herein after in this document.

a. 7.5MVANos25489526.0010979052.00Nos230000.0060000.0011039052.00Nos25489526.0010979052.00Nos230000.0060000.0011039052.00Nos05489526.000.00Nos030000.000.000.00Nos0Nos0

2Supply, erection, testing & commissioning of 33 KV, 800A, manually operated horizontal rotating type double break, triple pole Gang operated isolator complete with post insulator, arching horns, mechanical interlocking arrangement etc.as per relevant ISS(For Rampur S/S and at NSRCC end).0.000.000.000.00

a) With earth switch.No235000.0070000.00No22500.005000.0075000.00No035000.000.00No02500.000.000.00No235000.0070000.00No22500.005000.0075000.00No2No2

b) Without earth switch.No127000.0027000.00No12000.002000.0029000.00No027000.000.00No02000.000.000.00No127000.0027000.00No12000.002000.0029000.00No1No1

3Supply, erection, testing & commissioning of 33 KV Single Phase, outdoor type 2 Core C.T of ratio 300 / 1-1 Amp with suitable burden & class of accuracy complete with associated terminal box connecting link etc. ( for 33 KV outgoing feeder)(For RampurS/S)No335800.00107400.00No32000.006000.00113400.00No035800.000.00No02000.000.000.00No335800.00107400.00No32000.006000.00113400.00No3No3

4Supply, erection, testing & commissioning of 10KA, 30 KV, Station Valve type metal oxide heavy duty Lightning Surge Arrestor suitable for operation on 33KV Sytem conforming to ISI : 3070 (P-1) / 1974 and amendments thereafter and as required (1 set at Rampur S/S end and 1 set at NSRCC end).No615000.0090000.00No61500.009000.0099000.00No015000.000.00No01500.000.000.00No615000.0090000.00No61500.009000.0099000.00No6No6

5Supply, erection, testing & commissioning of 33 KV, 1000A, 750 MVA rupturing capacity, outdoor Vacuum Circuit Breaker complete with motor operated spring closing (Local / Remote) arrangement with all accessories including lattice support structure,foundation bolts,G.I. nuts & bolts,washers etc. as required and as per relevant ISS complete operative on 110V DC at Rampur Substation end .0.000.000.000.00

a) For 33 KV Rampur-NSRCC UG Feeder.No1340000.00340000.00No115000.0015000.00355000.00No0340000.000.00No015000.000.000.00No1340000.00340000.00No115000.0015000.00355000.00No1No1

6Supply, erection, testing & commissioning of 33 KV control & relay panel, simplex type complete with differential relay, 2-over current and 1- Earth fault combined relay, Auxiliary relay, 1- voltmeter, 3- ammeter, CT operated static trivector meter, internal panel wiring, simaphore for Vacuum Circuit breaker & isolator, Mimic bus diagram (Metal size 4mm thick X 10mm width).0.000.000.000.00

b) For 33 KV Rampur.No1349400.00349400.00No15000.005000.00354400.00No0349400.000.00No05000.000.000.00No1349400.00349400.00No15000.005000.00354400.00No1No1

7i) Supply and Erection of Galvanised steel structure and Nuts, Bolts, spring washer etc. as required for 33 KV tower, grantry, post insulator and equpments. a) Steel structure b) Nuts & bolts, spring washer and foundation bolts etcLot1352600.00352600.00Lot143500.0043500.00396100.00Lot0352600.000.00Lot043500.000.000.00Lot1352600.00352600.00Lot143500.0043500.00396100.00Lot1Lot1

ii) Supply, erection, testing & commissioning of substation busbar & stringing materials for 33 KV bus at Rampur end.a) ACSR 7/1.57/6/4.72 mm (DOG ) conductor. b) 40mm dia. Al. pipe for equipments bus current carrying capacity 400Amps. c) 7/3.15mm earth wire for substation shielding. d) Ball & socket type 70 KN, 11KV disc Insulator. e) Al. tension clamps. 3 -U bolt type, ball& socket type, suitable for70KN Disc Insulator and ACSR DOG conductor. f )"T"/ "I" / other Clamp/power connector suitable for ACSR DOG Conductor and Al. tube as required.Lot1125150.00125150.00Lot110200.0010200.00135350.00Lot0125150.000.00Lot010200.000.000.00Lot1125150.00125150.00Lot110200.0010200.00135350.00Lot1Lot1

8Design, Engineering,manufacturing, Supply, erection, testing & commissioning of 33KV, 1250A, 31.5 KA for 3 Sec. Metal Clad withdrawable type indoor VCB,highly reliable , and totally enclosed product under compartmentalised construction combined with positive safety interlocks for safe draw in/draw out of VCB trolley/carriage including draw out type PT Compartment (with dual rating PT 33KV/1.732/110V/1.732-110 V/1.732) in VCB Trolley with standard integrated protection relays( both numerical & electromechanical) as per IEC62271-100/200, 12 window alarm & annunciation system and SCADA compatible control system,power pack,series trip arrangement, internal arc tested as per IEC62271-200 including integral earth switch and motor operated spring charged mechanism, mounted on truck carriage, complete with self contained mechanism with mechanica & electrical indications of operational status & auxiliary switch as required as per standard requirement specified in Technical specification section in the document including supply of 1No 2.5 KV Motorised Meggar.0.000.000.000.00

a) Incoming Feeder with CT (CTR: 300/1-1A) at NSRCC end.Nos11206105.001206105.00Nos120000.0020000.001226105.00Nos01206105.000.00Nos020000.000.000.00Nos11206105.001206105.00Nos120000.0020000.001226105.00Nos1Nos1

b) Outgoing feeder for Transformers with CT (CTR: 300-150/1-1-1A)Nos2800000.001600000.00Nos215000.0030000.001630000.00Nos0800000.000.00Nos015000.000.000.00Nos2800000.001600000.00Nos215000.0030000.001630000.00Nos2Nos2

c) Spare Incoming CT (CTR: 300/1-1A) at NSRCC endNos11206105.001206105.00Nos123750.0023750.001229855.00Nos01206105.000.00Nos023750.000.000.00Nos11206105.001206105.00Nos123750.0023750.001229855.00Nos1Nos1

9Design, Engineering, Supply, Testing & commissioning of 11 KV, 800Amps continuos rated current, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker, complete with Control & Relay Pannel Simplex type with 3Phase pannel top mounted PT of ratio: 11000 /110Volt,110 Volt DC actuated electrical closing mechanism and internal wiring, Numerical as well as electromechanical protection by 2-Over current & 1-earth fault combined ( Micom or other reputed make) digital & electromechanical relays for integrated protection,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible) 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed herein after including supply of ABC dry powder type 2nos, 5kg each and 2Nos each, CO₂ cylinder type with pressure indicator fire extinguisher .0.000.000.000.00

a. Incoming pannel with (CTR: 900-450/1-1-0.577A)Nos2306620.00613240.00Nos210000.0020000.00633240.00Nos0306620.000.00Nos010000.000.000.00Nos2306620.00613240.00Nos210000.0020000.00633240.00Nos2Nos2

10Design, Engineering, Supply, Testing & commissioning of 11 KV, 800 Amps continuos rated current, 350 MVA rupturing capacity Indoor Vaccum Circuit Breaker( for outgoing feeder) , complete with 1 set of CT of ratio 300/1-1, Control & Relay Pannel Simplex type with 110 Volt DC actuated electrical closing/tripping mechanism and internal wiring, 2-Over current & 1-earth fault combined Micom digital relay,1 no.electromechanical AREVA Master Trip Relay, auxiliary relays as required,1 no.L&T / SECURE make "Tri- Vector" Meter(SCADA compatible), 3- Ammeter, 1 -Voltmeter, 1 -C.T operated static KW meter , with panel bus mounted C.T and integral earthing facility including inernal arc tested panel Conforming to relevant ISS/IEC as reqd.including standard indication facilities as per requirement detailed herein after.Nos5423588.002117940.00Nos58000.0040000.002157940.00Nos0423588.000.00Nos08000.000.000.00Nos5423588.002117940.00Nos58000.0040000.002157940.00Nos5Nos5

11Design, Engineering, Supply, Erection, Testing & commissioning of 110V DC, 240Ah Capacity Sealed and Maintenance Free(SMF) VRLA Battery Bank comprising of 60 Nos. 2.2 Volt each Cell (out of 60 cells, 5 Nos. being spare) complete with all accessories conforming to relevant ISS as per latest amendment detailed in the technical specification section of the document.Set1308000.00308000.00Set13500.003500.00311500.00Set0308000.000.00Set03500.000.000.00Set1308000.00308000.00Set13500.003500.00311500.00Set1Set1

12Design, Engineering,manufacturing, Supply, Erection, Testing at site & commissioning of 415 VAC(plus minus 10%) nominal input Voltage,50 HZ(plus minus 5%),110 Volt DC Output with adjustable range, 40A thyristor controlled float cum boost charger(with less than 2% RMS ripple content, without battery connected)less than 60db noise level constant voltage processed Battery charger compatible for aforesaid VRLA battery Bank Conforming to relevant ISS and latest amendment complete with standard protection as per IP-54 to 20 as per IS-2147,built in DCDB, standard indications and controls including switches,temperature range of 50 degree centigrade and painted by RAL 7032 etc. as required detailed in technical specification section of this document.Nos1160000.00160000.00Nos12500.002500.00162500.00Nos0160000.000.00Nos02500.000.000.00Nos1160000.00160000.00Nos12500.002500.00162500.00Nos1Nos1

13Design, manufacture, testing at works, transport to site, insurance, erection and commissioning of 110Volt D.C. Distribution Boards (DCDB) with dust tight ,vermin proof, gasketed door, enclosure made of sheet steel 2 mm. thick CRCA, painted by powder coated paint RAL 7032 with Aluminium busbar of 40x6 mm complete with (L&T/GE/C&S/HAVELLS make 1x160 A TP MCCB, 1x32 A DC DP MCB, 6x16 A DC DP MCB, analog Volt & Ampere meter,LED indication,Mains failure and Earth fault Relay etc. including all control and protection gears complete as per requirement and asdetailed in technical specification section in the document.Nos118000.0018000.00Nos11200.001200.0019200.00Nos018000.000.00Nos01200.000.000.00Nos118000.0018000.00Nos11200.001200.0019200.00Nos1Nos1

14Design, manufacture, testing at works, transport to site, insurance, storage, erection and commissioning of( L & T/ SECURE/GE make) 415 Volts, A.C. 50 Hz A.C. Distribution Board complete with 300 Amp. TPN with link in incoming supply, 3 nos.300/5(15 VA) CT,300 Amp Aluminium busbar,1x100A TPN,3x63 A TPN,2x32A TPN,3x63 A DP,5x32 A DP as per requrement including provision for Voltage,Ampere indications and L&T/SECURE make KWH mete and accessories as described in technical specification.Nos198000.0098000.00Nos12000.002000.00100000.00Nos098000.000.00Nos02000.000.000.00Nos198000.0098000.00Nos12000.002000.00100000.00Nos1Nos1

151100 Volts grade PVC insulated PVC sheathed, 2.5 sq.mm.( stranded copper conductor) control cable with armouring of following capacity & core as per IS:1554(Part-I)1988.0.000.000.000.00000.00

a) 2 Core 2.5mm2 b) 4 Core 2.5mm2 c) 7 Core 2.5mm2 d) 12 Core 2.5mm2Lot143020.0043020.00Lot12460.002460.0045480.00Lot043020.000.00Lot02460.000.000.00Lot143020.0043020.00Lot12460.002460.0045480.00Lot1Lot1

16Design, Engineering,manufacturing, Supply, laying in position in cable trench, Testing & commissioning of Single Core, 19 /33 KV, 185 Sq. mm. XLPE insulated, screened armoured power cable as per TSECL approved design, drawing, specification and as reqd. as per direction of Eng-In-Charge and as detailed herein after in this document.Mtr1751400.00245000.00Mtr.175400.0070000.00315000.00Mtr1751400.00245000.00Mtr.0400.000.00245000.00Mtr01400.000.00Mtr.175400.0070000.0070000.00Mtr0Mtr.175

17Design, Engineering, manufacturing ,Supply, laying in position in cable trench, Testing & commissioning of Single Core, 6.35/11 KV(E), 400 Sq. mm. XLPE insulated armoured power cable in cable trench as per TSECL approved design, drawing, specification and as reqd. as per direction of Eng-In-Charge and as detailed herein after in this document.Mtr3001410.00423000.00Mtr.300400.00120000.00543000.00Mtr3001410.00423000.00Mtr.0400.000.00423000.00Mtr01410.000.00Mtr.300400.00120000.00120000.00Mtr0Mtr.300

18Design, Engineering,manufacturing, testing at works, Supply, laying in position in trench, Testing & commissioning of Three Core, 6.35/11 KV, 240 Sq. mm. XLPE insulated armoured power cable in trench with supply of 1No Hydulic crimping tool (capable of crimping from range of 50 sqmm to 400 sqmm size socket) as per relevant ISS and detailed in the Technical specification Section in the document and direction of Eng-In-Charge.Mtr2401034.00248160.00Mtr.240400.0096000.00344160.00Mtr2401034.00248160.00Mtr.0400.000.00248160.00Mtr01034.000.00Mtr.240400.0096000.0096000.00Mtr0Mtr.240

19Design, Engineering, Supply, Testing & commissioning & joints of Indoor type heat shrink end jointing kit for Single core, 185 Sq.mm. Size, XLPE insulated Power Cable of grade 19//33KV(E), as per IS 7098 Part-II 1985 and latest ammended.Nos166000.0096000.00Nos163000.0048000.00144000.00Nos06000.000.00Nos03000.000.000.00Nos166000.0096000.00Nos163000.0048000.00144000.00Nos16Nos16

20Design, Engineering, Supply, Testing & commissioning & joints of 0utdoor type heat shrink end jointing kit for Single core, 185 Sq.mm. Size, XLPE insulated Power Cable of grade 19//33KV(E), as per IS 7098 Part-II 1985 and latest ammended.Nos167000.00112000.00Nos163000.0048000.00160000.00Nos07000.000.00Nos03000.000.000.00Nos167000.00112000.00Nos163000.0048000.00160000.00Nos16Nos16

21Design, Engineering, Supply, Testing & commissioning & joints of Outdoor type heat shrink end jointing kit for Single core, 400 Sq.mm. Size, XLPE insulated Power Cable of grade 6.35/11 KV(E). as per IS 7098 Part-II 1985 and latest ammended.Nos166000.0096000.00Nos162500.0040000.00136000.00Nos06000.000.00Nos02500.000.000.00Nos166000.0096000.00Nos162500.0040000.00136000.00Nos16Nos16

22Design, Engineering, Supply, Testing & commissioning & joints of Indoor type heat shrink end jointing kit for Single core, 400 Sq.mm. Size, XLPE insulated Power Cable of grade 6.35/11 KV(E). as per IS 7098 Part-II 1985 and latest ammended.Nos165000.0080000.00Nos162500.0040000.00120000.00Nos05000.000.00Nos02500.000.000.00Nos165000.0080000.00Nos162500.0040000.00120000.00Nos16Nos16

23Design, Engineering, Supply, Testing & commissioning & joints of Out door type heat shrink end jointing kit for Three core, 240 Sq.mm. Size, XLPE insulated Power Cable of grade 6.35/11 KV(E), as per IS 7098 Part-II 1985 and latest ammended.Set65500.0033000.00Set62500.0015000.0048000.00Set05500.000.00Set02500.000.000.00Set65500.0033000.00Set62500.0015000.0048000.00Set6Set6

24Design, Engineering, Supply, Testing & commissioning & joints of Indoor type heat shrink end jointing kit for Three core, 240 Sq.mm. Size, XLPE insulated Power Cable of grade 6.35/11 KV(E). as per IS 7098 Part-II 1985 and latest ammended.Nos64900.0029400.00Set62500.0015000.0044400.00Nos04900.000.00Set02500.000.000.00Nos64900.0029400.00Set62500.0015000.0044400.00Nos6Set6

25Design, manufacturing, supply, erection, testing & commissioning of 11 KV, 600 ampere rated outdoor type standard 3 way Kiosk (CNC m/c fabricated and made of 3.25 mm sheet) suitable for11 KV cable termination as per relevant ISS and IP with copper Busbar and acces

Schedule of Work Name of Work:- Implementation …...meter, internal panel wiring, simaphore for Vacuum Circuit breaker & isolator, Mimic bus diagram (Metal size 4mm thick X 10mm width).

Documents