Top Banner
RCF 4PRO 5031-A (Two-way Active speaker system 2x15"+1", 600W) MRP AED. 6938/ Pc The 4PRO 5031-A is a self-powered, lightweight two-way full bandwidth loudspeaker system equipped with two 15” woofers and a 1.75” voice coil diaphragm, and a 1,7” voice coil diaphagm, compression driver mounted to a constant directivity horn. It integrates a 600 Watt digital bi-amplifiication, a complete electronic processor section and RCF low distortion, high power transducers. The system is compact and extremely linear and offers the typical balanced sound of high level two way systems. The 90° angle is wide enough to provide coverage of an audience when used one per side, yet narrow enough to allow displaying of multiple enclosures without excessive coverage overlap. The 4PRO 5031-A is the ideal choice when the application requires high performance and simple set-up, perfect for main PA, side fills, night clubs and corporate events. The new 15” inch, 2,5” voice coil, woofer is the result of the latest refinementin years of RCF experience in compact speaker design and manufacture, resulting in an accurate and a tight extended bass. The compression driver uses a new 1” titanium dome in front of a low compression, optimised geometry, radial phase plug. This innovative design is powered from a high flux neodymium magnet offering extreme precision in high frequency reproduction. 4PRO 5031-A are equipped with a new generation of 600 Watt Digital Amplifier, 400 Watt for the two woofer and 200 Watt for the compression driver. The result of this is very high output, extremely low distortion and an incredible natural sound. The amplifier presents both XLR/jack (Combo)
20

RCF speakers

Sep 05, 2014

Download

proinfovvsons

V.V.& Sons is the authorized distributor of RCF Loud Speakers and Sub Woofers in UAE and GCC Countries.

Contact Person - Joseph

Email ID - [email protected]

Contact Number - 0097142684575
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: RCF speakers

RCF 4PRO 5031-A (Two-way Active speaker

system 2x15"+1", 600W)

MRP AED. 6938/ Pc

The 4PRO 5031-A is a self-powered, lightweight two-way full bandwidthloudspeaker system equipped with two 15” woofers and a 1.75” voice coildiaphragm, and a 1,7” voice coil diaphagm, compression driver mounted to aconstant directivity horn.It integrates a 600 Watt digital bi-amplifiication, a complete electronicprocessor section and RCF low distortion, high power transducers. The systemis compact and extremely linear and offers the typical balanced sound of highlevel two way systems. The 90° angle is wide enough to provide coverage ofan audience when used one per side, yet narrow enough to allow displayingof multiple enclosures without excessive coverage overlap.The 4PRO 5031-A is the ideal choice when the application requires highperformance and simple set-up, perfect for main PA, side fills, night clubs andcorporate events.The new 15” inch, 2,5” voice coil, woofer is the result of the latestrefinementin years of RCF experience in compact speaker design andmanufacture, resulting in an accurate and a tight extended bass. Thecompression driver uses a new 1” titanium dome in front of a lowcompression, optimised geometry, radial phase plug. This innovative design ispowered from a high flux neodymium magnet offering extreme precision inhigh frequency reproduction.4PRO 5031-A are equipped with a new generation of 600 Watt DigitalAmplifier, 400 Watt for the two woofer and 200 Watt for the compressiondriver. The result of this is very high output, extremely low distortion andan incredible natural sound. The amplifier presents both XLR/jack (Combo)balanced inputs, XLR output link, volume, a switchable EQ Mode (Contour)and a mic/line switch. The amplifier features a solid mechanical aluminiumstructure which not only stabilize the amplifier during transportation but alsoassist in the heat dissipation.The processor section includes active crossover, system equalization,transducer phase alignment, limiter and protection functions. The system is

Page 2: RCF speakers

visually monitored from 4 status LEDs. All components are housed in a strongBaltic birch plywood enclosure where high density polystyrene end capsguarantee the maximum strength.The front is protected from a strong, powder coated, metal grille. The cabinetfeatures two comfortable recessed side handles for easy portability.

MAIN FEATURES• 1200 WATT PEAK, 600 WATT RMS• 132 dB max spl• 90 x 60, Wide dispersion constant directivity horn• 2 x 15” woofer, 2.5” voice coil• 1” HF driver,1.7” voice coil

Made in ITALY

MAIN APPLICATIONS• Sound reinforcement systems• Band and vocal PA• DJ PA systems• Small to medium size venue Main PA

RCF 4PRO 8003-AS(18" Bass reflex Active Sub, 1000W)

MRP AED.8301/ Pc

4PRO 8003-AS active subwoofer integrates an high current 1000 Wattdigital amplifier, a complete electronic processor section and premium RCFlow distortion, high power woofer. The result is a compact, lightweight,high power subwoofer, unique in his class for extended output and lowdistortion. This new high power 18” inch woofer is the result of the latestrefinement in years of RCF experience in compact active subwoofer design

Page 3: RCF speakers

and manufacture, providing a fast and controlled reproduction of the bassfrequency range. Featuring a 4” inside/outside voice coil to minimize powercompression and extend the life of this product.4PRO 8003-AS is equipped with a new generation of 1000 Watt DigitalAmplifier that produce a very high output, an extremely low distortion and anincredible natural sound. The amplifier features a solid mechanical aluminiumstructure which not only stabilize the amplifier during transportation but alsoassist in the heat dissipation.The input section offers mono/stereo combo XLR/Jack input connectors andXLR high pass output connectors. A recessed master volume, the phase switchand the selectable crossover frequency switch guarantee the best versatility.The processor section includes active system equalization, limiter andprotection functions. The system is visually monitored from 4 status LEDs.The Baltic birch plywood enclosure is painted with black, heavy duty, texturedepoxy. The front is protected from a strong, powder coated, metal grille. Thecabinet features a 35 mm pole mount socket and two comfortable recessedside handles.

APPLICATIONS• Live sound reinforcement• Portable and installed audio-visual systems• Live theatre and houses of worship• Auditoriums, retail, ballrooms and night clubs

FEATURES• High current 1000 watt digital amplifier• 134 dB max spl• 18” High power woofer, 4” voice coil• Xover 80-120 Hz switch, phase switch• Electronic equalization, limiter and protection• Mono/stereo combo xlr/jack input, Mono/stereo xlr signal output• Baltic birch compact enclosure and 2 side handles for easy transportation• PFC power factor correction

Made in ITALY

RCF ART 312A MKIII(Active speaker system 12" + 1", 400W RMS)

Page 4: RCF speakers

MRP AED. 2850 /Pc

RCF ART 312-A is an active, wide dispersion 2 way sound reinforcement speaker.It integrates a digital high power 400 Watt amplifier, a multiway DSP section and premium RCF lowdistortion, high power transducers. The result is compact, high power accurate systems, unique inthere class for clarity and low distortion.The total amplifier power is 400 watt RMS: a 300 watt digital amplifier design is used to power thelow frequencies, the compression driver is powered from 100 watt of digital clear power.The Dsp takes care of low noise crossover, equalisations, soft-limiters, rms limiters, large signalscompression and protection functions.The input section presents a XLR input connector that is switchable from microphone to line levels. Amaster volume control and a useful XLR loop through link guarantee the best versatility.The new 12” inch woofer is the result of the latest refinement in years of RCF experience in compact2 way speakers, resulting in a fast and accurate reproduction of the midbass frequency rangeand controlled deep bass. The compression driver uses a new 1.5” mylar dome in front of a lowcompression, optimised geometry and radial phase plug. This innovative design is powered from ahigh flux ferrite magnet and offers a very open and natural midrange sound and extreme precisionin high frequencies reproduction.All the system is housed in a strong , very lightweight, polypropylene composite enclosure . Thewoofer is protected from a strong, powder coated, metal grille. The cabinet features 2 M10 threadedfly points, a 35 mm stand adaptor plus an ergonomic top handle for easy transportation.

Features• 400 watt Monolithic bi-amplification, 300 watt low frequency and100 watt high frequency power• 128 dB max SPL• Wide dispersion, 90 x 60 low distortion, constant directivity horn• 12” high power woofer, 2.5” voice coil• 1”, mylar dome, high frequency driver• Electronic equalization, phase alignment, limiter and protection• Jack/XLR input, XLR signal output

Page 5: RCF speakers

• 2 side handles and 1 comfort designed top handle for easytransportation and positioning• Four M10 fly points and built in pole mount adaptor

Made in ITALY

ApplicationsART 312-A is the optimum choice for live sound situations where anexceptional full range, outstanding bass reproduction and accuratehigh frequency delivery is required. The ART 312-A is also suitable formonitoring applications.

RCF ART 422A MK ii (Digital

active speaker system 12" + 2", 400W)

MRP .AED 4584/Pc

RCF ART 422-A MK II is an active, wide dispersion 2 way sound reinforcementspeaker. It integrates a high power 400 watt digital amplifier, a completeelectronic processor section and RCF low distortion, high power transducers.The system is unique in its class for output and vocal intelligibility.The new 12” woofer is the result of the latest refinement in year of RCFexperience in compact 2 way speakers. Features a 2,5 ” voice coil, very high

Page 6: RCF speakers

efficiency and controlled bass reproduction.The new 2” neodymium compression driver with a pure titanium domedeveloped for the ART 422-A features a complex geometry suspension anddirect drive coil offering a transparent midrange sound and extreme fidelity inhigh frequencies reproduction.RCF ART 422-A MK II is equipped with a new generation of 400 Watt DigitalAmplifier. The result of this is very high output, extremely low distortionand an incredible natural sound. Each amplifier presents both XLR In/Outconnectors and a Jack input for the maximum connection versatility. An easyto reach volume knob on the back allows to set the overall volume of thespeaker according to its application. A switchable EQ Mode make it easierto select among two different equalisation presets: Extended responseswitch, which slightly emphasizes the bass response for playback music andlow volume applications or Linear response switch, for using the speaker toamplify a live mix. 3 status LEDs – Power / Signal / Status are provided formonitoring the system.An integrated DSP manages crossover, Eq., soft limiter, compressor anddynamic bass boost.ART 4 cabinets are moulded on a special polypropylene composite materialand are designed to dampen down vibrations even at maximum volumesettings. The cabinet shape allows every ART 4 speaker to be used also instage monitor configuration At the bottom of the speakers a rugged stainlesssteel pole mount has been provided for deploying the speakers on stands oron subwoofersThe woofer is protected from a strong, powder coated, metal grille. Thecabinet features 2 M10 threaded fly points and an ergonomic top handle foreasy transportation.

MAIN FEATURES

• 400 Watt digital bi-amplification, 300 Watt Low Frequency and 100 WattHigh Frequency Power• 128 dB max spl• Wide dispersion 90 x 60 constant directivity horn• 12” High power woofer, 3” voice coil• 2” Neodymium high frequency driver , 2.5” voice coil• Electronic equalization, soft limiter and protection• Xlr/jack combo input, xlr signal output• 2 side handles and 1 ergonomic top handlefor easy transportation and positioning

Made in ITALY

MAIN APPLICATIONS

• Live sound reinforcement• Portable PA• Frontfill and sidefill• Houses of worship, auditoriums, retail, clubs, ballrooms, corporate AV, livetheatre, theme parks• Main vocal monitor

Page 7: RCF speakers

RCF AYRA 5Active 2 way 5" monitoring system - 35W+20W (Studio Monitor)

MRP AED.867/Pc

AYRA 5 is a two-way reference studio monitor that is designed for near fieldapplications, equally suited to your home recording studio. AYRA 5 features ahigh quality 1” soft dome tweeter specially designed on a precision directivitywaveguide and a 5” composite fibreglass woofer. The AYRA Series isoptimized to deliver the best sound for a variety of applications. Whether youare working with a near field mix at your home studio, you need a clear andloud sound for your multimedia gaming or simply need some good monitorsfor your personal computer.AYRA 5 is equipped with a new generation of true active 35 W + 20 W classAB design Amplifier. The result of this is very high output, extremely lowdistortion and an incredible natural sound. At the rear panel of the Ayra thereare XLR, Jack & RCA inputs. Input sensitivity control and high frequency trimknobs and switch for power on/off and selector switch for 115 V or 230 Voperation.With the reflection free front and the cabinet in lacquer painted mediumdensity, the Ayra monitor is shaped in a quality and very smooth look.

MAIN FEATURES• True active 35 W + 20 W class AB design• 50 Hz – 20.000 Hz frequency response• Precision directivity tweeter waveguide• Fully featured input board• 5” composite fiberglass woofer• 1” soft dome tweeter• Reflection free front cabinet design• Low distortion reflex port

Page 8: RCF speakers

MAIN APPLICATIONS• Home Recording• Studio Recording• Personal Monitoring• DJ Monitoring• Multimedia• AV production facilities

RCF AYRA 10 SUB(Active 10" Studio monitoring

sub 200W)

MRP. AED .2044/ Pc

AYRA 10 SUB is a 10” professional subwoofer system that is designedespecially for the AYRA near field active monitors, but works perfectly in otherapplications as a stand-alone subwoofer.The Ayra Sub 10 is the perfect match to the individual models in the AyraSeries and extends the frequency response of your system, still maintainingthe perfect balance in your mix.AYRA 10 SUB features a 10” composite fibreglass woofer specially designedfor a low distortion reflex port and a cabinet in lacquer painted mediumdensity.AYRA 10 SUB is equipped with a new generation of true active 250 W classAB design Amplifier. The result of this is very high output, extremely lowdistortion and an incredible natural sound. At the rear panel of the Ayra thereare XLR, Jack & RCA inputs. Input sensitivity control and high frequency trimknobs and switch for power on/off and selector switch for 115 V or 230 Voperation.

MAIN FEATURES• True active 250 W class AB design• 35 Hz – 130 Hz frequency response• Stereo input board, stereo x-over output• Selectable low pass filter• 10” composite fibreglass woofer• Low distortion reflex port• Lacquer painted medium density cabinet

Page 9: RCF speakers

MAIN APPLICATIONS• Home Recording• Studio Recording• Personal Monitoring• DJ Monitoring• Multimedia• AV production facilities

RCF HD10-A (Digital active speaker system 10" + 1", 600W)

MRP AED 3841/PC

The HD 10-A, with an exceptional full range, is the optimum choice for livesound and installed situations.Thanks to its deep bass punch, clean midrange output and accurate highfrequencies, it offers the ultimate intelligibility in vocal and recorded music,from live sound to playback and from monitoring to fixed installationapplications The concept of this unique speaker derives from the touringindustry, bringing in a compact cabinet all the experience of RCF professionalsound. The new 10” woofer is the result of the latest refinement in year ofRCF experience in compact 2 way speakers. Features a 2,5 ” voice coil, veryhigh efficiency and controlled bass reproduction.The 1” compression driver uses a new 1.7” voice coil dome design andoptimised geometry radial phase plug. This innovative design is powered froma high flux magnet offering a very open and natural midrange sound withextreme precision in high frequency reproduction.RCF HD 10-A is equipped with a new generation of 600 Watt DigitalAmplifier. RCF Class-D power amplifiers technology packs huge performanceoperating with high efficiency into a lightweight solution. D Line amplifiersdeliver ultra fast attack, realistic transient response and impressive audioperformance. The amplifier features a solid mechanical aluminium structurewhich not only stabilize the amplifier during transportation but also assist in

Page 10: RCF speakers

the heat dissipation. All the D-LINE amplifiers presents SMPS power supplysection in order to produce maximum output and minimum transportationweight. The integrated DSP manages crossover, equalisation, soft limiter,compressor and dynamic bass boost. Switchable EQ Mode make it easier toselect among two different equalisation presets: Extended response switch,which slightly emphasizes the bass response for playback music and lowvolume applications and Linear response switch, for using the speaker toamplify a live mix. A useful Mic/Line switch to adjust the input sensitivityis provided. When used just for speech, the Mic setting allows to use amicrophone directly with the speaker. Set the selector to Line when using thespeaker for live music or playback.An easy to reach volume knob on the back allows to set the overall volume ofthe speaker according to its application.3 status LEDs – Power / Signal / Status are provided for monitoring thesystem.D LINE cabinets are moulded on a special polypropylene composite materialdesigned to dampen down vibrations even at maximum volume settings.From moulding to the final texture, D LINE offers the maximum reliability andstrength for the intensive use on the road. The reflex porting has been resizedto offer a better efficiency. The HD 10-A is equipped with a top handle anda side handle with rubber handgrip for greater portability. The new cabinetshape will allow every D-LINE model to be used in the standard configurationas well as in stage monitor model. Two M10 and 3 M6 threaded inserts areprovided for optional mounting hardware in Installed Sound Applications.

MAIN APPLICATIONS• Live Sound• Rental• Portable PA• Stage Monitoring• Clubs

MAIN FEATURES• 1200 WATT PEAK, 600 WATT RMS• Digital Bi-amp• DSP Sound Processing• RCF Precision Transducers• SPL max. 129 dB

Made in ITALY

RCF HD12-A (Digital active speaker system 12" + 1", 600W)

MRP AED. 4460 /Pc

Page 11: RCF speakers

The HD 12-A offers an extremely linear response and a precise, deep lowfrequency control. The 12” woofer guarantee a superior sound projectionindoor and outdoor. It is the ideal speaker for main front of house in small PAsystems, for high power monitoring and it is the best solution where higherpower is required for various applications in larger venues. The concept ofthis unique speaker derives from the touring industry, bringing in a compactcabinet all the experience of RCF professional sound.The new 12” woofer is the result of the latest refinement in year of RCFexperience in compact 2 way speakers. Features a 3 ” voice coil, very highefficiency and controlled bass reproduction. The 1” compression driver uses anew 1.7” voice coil dome design and optimised geometry radial phase plug.This innovative design is powered from a high flux magnet offering a veryopen and natural midrange sound with extreme precision in high frequencyreproduction. RCF HD 12-A is equipped with a new generation of 600 WattDigital Amplifier. RCF Class-D power amplifiers technology packs hugeperformance operating with high efficiency into a lightweight solution. D Lineamplifiers deliver ultra fast attack, realistic transient response and impressiveaudio performance. The amplifier features a solid mechanical aluminiumstructure which not only stabilize the amplifier during transportation butalso assist in the heat dissipation. All the D-LINE amplifiers presents SMPSpower supply section in order to produce maximum output and minimumtransportation weight. The integrated DSP manages crossover, equalisation,soft limiter, compressor and dynamic bass boost. Switchable EQ Mode make iteasier to select among two different equalisation presets: Extended responseswitch, which slightly emphasizes the bass response for playback music andlow volume applications and Linear response switch, for using the speakerto amplify a live mix. A useful Mic/Line switch to adjust the input sensitivityis provided. When used just for speech, the Mic setting allows to use amicrophone directly with the speaker. Set the selector to Line when using thespeaker for live music or playback.An easy to reach volume knob on the back allows to set the overall volume ofthe speaker according to its application.3 status LEDs – Power / Signal / Status are provided for monitoring thesystem.D LINE cabinets are moulded on a special polypropylene composite materialdesigned to dampen down vibrations even at maximum volume settings.From moulding to the final texture, D LINE offers the maximum reliability andstrength for the intensive use on the road. The reflex porting has been resizedto offer a better efficiency. The HD 12-A features 3 ergonomically designedforged handles with rubber handgrip, 2 on the sides and one at the top. Atthe bottom a rugged steel pole mount has been installed in all models. Thenew cabinet shape will allow every D-LINE model to be used in the standardconfiguration as well as in stage monitor model. Two M10 and 3 M6 threadedinserts are provided for optional mounting hardware in Installed SoundApplications.

Page 12: RCF speakers

MAIN FEATURES• 1200 WATT PEAK, 600 WATT RMS• Digital Bi-amp• DSP Sound Processing• RCF Precision Transducers• SPL max. 130 dBMade in ITALY

MAIN APPLICATIONS• Live Sound• Rental• Portable PA• Stage Monitoring• Clubs

RCF HD32-A(Digital active speaker system 12" + 3"VC CD,

700W)

MRP AED. 5687 /Pc

The HD 32-A it’s a unique product in his category. The titanium dome,3.0” voice coil compression driver offers a unique vocal clarity and soundprojection.At the core of HD 32-A design is the new ND 840 compression driver. The ND840 large format compression driver delivers one of the key advantages of theHD32-A, the 3.0” voice coil allows a crossover point of 800Hz and thereforealmost all of the vocal range can be produced by this driver. This allows bettercoverage and dispersion control, and superior efficiency. All Compressiondrivers and Transducers are precision built taking advantage of RCF’s superiormoulding, assembly technologies and a wealth of professional knowledgeand experience dedicated to achieving extremely high standards

Page 13: RCF speakers

The HD32-A offers an extremely linear response and a precise, deep lowfrequency control. The 12” woofer guarantee a superior sound projectionindoor and outdoor. It is the ideal speaker for main front of house in small PAsystems, for high power monitoring and it is the best solution where higherpower is required for various applications in larger venues. The concept ofthis unique speaker derives from the touring industry, bringing in a compactcabinet all the experience of RCF professional sound. The new 12” woofer isthe result of the latest refinement in year of RCF experience in compact 2 wayspeakers. Features a 3 ” voice coil, very high efficiency and controlled bassreproduction.RCF HD32-A is equipped with a new generation of 700 Watt Digital Amplifier.RCF Class-D power amplifiers technology packs huge performance operatingwith high efficiency into a lightweight solution. D Line amplifiers deliver ultrafast attack, realistic transient response and impressive audio performance.The amplifier features a solid mechanical aluminium structure which notonly stabilize the amplifier during transportation but also assist in the heatdissipation.All the D-LINE amplifiers presents SMPS power supply section in order toproduce maximum output and minimum transportation weight. The integratedDSP manages crossover, equalisation, soft limiter, compressor and dynamicbass boost. Switchable EQ Mode make it easier to select among two differentequalisation presets: Extended response switch, which slightly emphasizesthe bass response for playback music and low volume applications and Linearresponse switch, for using the speaker to amplify a live mix.A useful Mic/Line switch to adjust the input sensitivity is provided. Whenused just for speech, the Mic setting allows to use a microphone directly withthe speaker. Set the selector to Line when using the speaker for live music orplayback.An easy to reach volume knob on the back allows to set the overall volume ofthe speaker according to its application.3 status LEDs – Power / Signal / Status are provided for monitoring thesystem.D LINE cabinets are moulded on a special polypropylene composite materialdesigned to dampen down vibrations even at maximum volume settings.From moulding to the final texture, D LINE offers the maximum reliability andstrength for the intensive use on the road. The reflex porting has been resizedto offer a better efficiency. The HD32-A features 3 ergonomically designedforged handles with rubber handgrip, 2 on the sides and one at the top. Atthe bottom a rugged steel pole mount has been installed in all models. Thenew cabinet shape will allow every D-LINE model to be used in the standardconfiguration as well as in stage monitor model. Two M10 and 3 M6 threadedinserts are provided for optional mounting hardware in Installed SoundApplications.

MAIN FEATURES• 1400 Watt• Digital Bi-amplification• DSP Sound Processing• RCF Precision 3.0” voice coil compression driver, titanium dome• RCF Precision 12” woofer• 131 dB MAX SPL• Powercon Input/Output

MAIN APPLICATIONS• Live Sound• DJs

Page 14: RCF speakers

• Portable PA• Stage Monitoring• Clubs• Voice reinforcement

RCF NX 15-SMA (ACTIVE COAXIAL STAGE

MONITOR 15"+1", 700W)

MRP AED.8549/ Pc

NX Series maximum flexibility philosophy has been maintained for NX15-SMA; it is possible, in fact, to use it as a portable PA system, thanks to therugged powder coated steel pole mount installed on the sideThe newly designed 15”+1” coaxial neodymium transducers guarantee anoutstanding audio quality and definition as well as an extremely lightweightof the final systemThe advantages of the coaxial transducers are the complete absence offeedback and, thanks to the coherent single spherical wave front with aperfect dispersion control, a perfect listening in every position.The design is powered from a large sized single neodymium ring magnet thatprovides an extremely high flux density and BL factor.The new hyper-vented aluminium basket and magnetic assembly designprovide an excellent heat dissipation and lower power compression.Special air-forced ventilations are provided for voice coil, magnet assemblyand basket.A 2,5” voice coil combined a strength fibreglass former and aluminium wiredrives the mid-bass cone with high efficiency and a good extension. The 1,7”dome compression driver, loaded to a 60° conical waveguide, provides a clearvocal output and a perfect high frequency extensionThe NX Coaxial Stage Monitors are provided with brand new digital amplifierswith powerful DSP processing. The NX 15-SMA is equipped with a 700 Wamplifier, 500 W feed the low frequencies and 200 W are used for the highfrequencies.In order to control the response of the speakers in such different applications,RCF has incorporated two special Equalization Modes: Floor, for stagemonitoring and Free Field, for the use of the speakers as a stand-alone PAsystemThe input board is fully equipped in order to configure the stage monitors forany stage situation with XLR Input and Output Link, Jack Input, Volume, InputSensitivity Switch, Free Field – Floor Switch, Status LEDs, Powercon AC Inputand Output Link

Page 15: RCF speakers

Cabinets are made in Baltic Birch plywood, finished with an extremelyresistant paint for an extensive use on the road. An ergonomic side handle,integrated with the input panel, is provided for an easier transport.

MAIN APPLICATIONS• Main vocal stage monitor• High-output guitar or keyboard monitor• Main PA in small venues• Portable and installed audio-visual systems

Made in ITALY

MAIN FEATURES• 700 Watt digital bi-amplification• 130 dB max spl• Wide dispersion 60° x 60° constant directivity horn• 15” High power neodymium woofer, 2.5” voice coil• 1,7” kapton dome, 1” exit, neodymium high frequency driver• DSP processing, boost eq, soft limiter and protection• Xlr/jack input, xlr signal output

RCF SUB 8004ASBass Reflex 18" High Power Active Subwoofer, 1250W RMS

MRP AED.12385/Pc

The SUB 8004-AS is on of the most powerful 18” subwoofers in pro-soundcategory. Featuring a high power, hypervented 18” woofer, with 4” inside/outside voice coils, this cabinet is designed to deliver a serious amount of lowfrequency. Powered by a 1250W digital amplifier module, the SUB 8004-AS canperform in the most demanding situations. The input board includes volumecontrol, deep/punch switch, high pass switch, phase switch, cardioid, time delay.

The SUB 8004-AS input section includesVolume control, a Deep / Punch switch;Signal, Power and Limiter LED’s; High pass

Page 16: RCF speakers

switch; Phase switch; Cardioid switch; Delaycontrol; Crossover and XLR signal link

MAIN FEATURES

2500 Watt 136 dB max SPL30 Hz - 120 Hz frequency response18” RCF Precision 4.0” voice coil vented wooferDSP controlled Input section with selectable presetsOn board time delay controlBaltic birch plywood tour grade cabinet

Made in ITALY

APPLICATIONS• Live sound reinforcement• Portable and installed audio-visual systems• Live theatre and houses of worship• Auditoriums, retail, ballrooms and night clubs

RCF SUB 8006-ASDouble 18" Bass Reflex Active Subwoofer, 2500W

MRP AED.20444/ Pc

The SUB 8006-AS is the largest and most powerful active sub woofer in theprofessional series.Featuring two 18” transducers, with 4” inside/outside voice coils, thiscabinet is designed to delivery a serious amount of low frequency. It is adirect radiating, high output, large-format sub woofer system proven incomplementing high efficiency, full-range loudspeakers. Driver mountingmaximizes cone area and minimizes frontal area, providing acousticalperformance and physical configuration well suited for creating largesubwoofer arrays.

Page 17: RCF speakers

SUB 8006-AS has been designed to extract the greatest efficiency from everypart of the system, resulting in an effortless reproduction of low frequencytransient response. As a self-powered system, the transducers, amplificationand DSP control electronics of the SUB 8006-AS are designed to optimizeperformance and maximize its power.The SUB 8006-AS ‘s efficiently tuned cabinet houses two RCF Precision backvented,long-excursion, new high power 18” inch cone drivers, providing afast and controlled reproduction of the bass frequency range. Featuring a 4”inside/outside voice coil to minimize power compression and extend the life ofthis product.The drivers have also been engineered for extreme efficiency, using highgaussferrite magnets for the most powerful magnetic field strength. Highmagnetic field strength increases the driver’s sensitivity, which yields greateroutput, while keeping heat dissipation requirements within operationaltolerances.Powered by a 2500W digital amplifier module, Class-D technology, that packshuge performance operating with high efficiency into a lightweight solution..It deliver ultra fast attack, realistic transient response and impressive audioperformance. The amplifier features a solid mechanical aluminium structurewhich not only stabilize the amplifier during transportation but also assist inthe heat dissipation. The integrated DSP manages equalisation, soft limiter,compressor and user adjustable settings as deep/boost EQ, Low pass, phasereverse and a preset for Cardioid setup.An easy to reach delay knob on the back allows to set the overall delay of thespeaker, in meters, according to its application. 3 status LEDs – Power / Signal/ Status are provided for monitoring the systemThe amplifier features a solid mechanical aluminium structure which notonly stabilize the amplifier during transportation but also assist in the heatdissipation and, with DSP control electronics and power supply, is integratedinto a single, field-replaceable module mounted in the rear of the cabinet.The cabinet is constructed of multi-ply hardwood and coated with a texturedblack finish. Integral metal grilles lined with acoustical black mesh protect thecone drivers. Integrated mechanics are for multiple configuration with HDL

MAIN APPLICATIONS• Live sound• Rental• Portable PA, clubs, ballrooms, live theatre• House of worship• Theme parks• Music playback and sound reinforcement in small and mid-size venues• Corporate A/V professionals and sound system hire companies

MAIN FEATURES• 5000 Watt Peak power - 2500 Watt RMS• 141 dB max SPL• 30 Hz - 120 kHz frequency response• 2 x 18” Woofer• DSP controlled Input section with selectable presets• Delay control• Integrated mechanics for multiple configuration with HDL 20-A• Baltic birch tour grade cabinet

Page 18: RCF speakers