Top Banner
TIN-23464202092 -sr-23464202os2 PAN-ACIFS8293B S.T.No. ACIFS8293BSD001 Shakti Engineering l[orks & Services Garage Line, Hoshangabad (M.P.) Mob: +91-9826{8721O, 91-7869786075 E-mail:[email protected] Budsetarv Estimate To, t The General Manager Security Paper Mill Hoshangabad (M.P.) Dear Sir, Thanks a lot for your verbal inquire for piping Fabrication and other work-at E.T. plant, New Filtration plant and Black liquor plant, Here is the Budgetary Estimate as. Scooe of Work at E.T, plant, New Filtration plant and Black liouor plant: A. lnstallation of 2" pipe line at Black liquor plant: 1. Shifting Material of 2" pipe line from store to Black liquor plant. 2. Removing of old 2" pipe line from sludge pump to last arriation tank. 3. Fabricate new 2" pipe line for sludge pump to last arriation tank. 4. lnstallation of 2" pipe line from sludge pumps to last arriation tank. 5. Do welding work in 2" pipe line such as taffit and flange welding. 6. To fitted 2" gate valve in 2" pipe line for all arriation tank. 7. Making support for 2" pipe line. 8. Making clamp for 2" pipe line. 9. Fitted 2" pipe line on both sludge pump. 10. Welding machine, welding electrode and gas cutter in contractor scope. 11. All material will be provided by S.P.M. All above work our labor Rate with tools & tackle & consumable items: 8000.00 B. lnstallation of 6" pipe line at E'T' plant Near Thickener No. 2: 1. Shifting Material of 6" pipe line from store to E'T. Plant. 2. Removing of old 5" pipe line thickener no.2 to screw pump house in 50 feet length. 3. Fabricate new 5" pipe line for thickener no.2 to screw pump hose in 50 feet length. 4. lnstallation of 6" thickener no.2 to screw pump hose in 50 feet length. 5. Do welding work in 6" pipe line such as taffit and flange welding. 6. To fitted 6" gate valve in 6" pipe line. 7. Making support for 6" pipe line. 8. Making clamp for 6" pipe line. 9. Connected 6" pipe line in Sump pump no.4 delivery line' l0.Welding machine, welding electrode and gas cutter in contractor scope 11.All material will be provided by S.P.M. All above work our labor Rate with tools & tackle & consumable items: 7000.00 Date: 19.10.15 C. Installation work of new centrifugal pump on Under Ground water tank No,2 (UGT No'2) at New Filtration plant: 1. Shifting work of new pump from store to UGT NO'2. 2. Fabricate bottom frame and mounted. 3. Erection work of new pump. 4. Do proper levelling work of pump. 5. Do proper alignment of pump and motor. 6. Shifting material of suction and delivery pipeline from store to UGT No.2. f(ffi41c
4

QTN SPM ETP

Feb 20, 2016

Download

Documents

spm4

shakti firm machine installation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: QTN SPM ETP

TIN-23464202092

-sr-23464202os2

PAN-ACIFS8293BS.T.No. ACIFS8293BSD001

Shakti Engineering l[orks & ServicesGarage Line, Hoshangabad (M.P.) Mob: +91-9826{8721O, 91-7869786075 E-mail:[email protected]

Budsetarv Estimate

To, tThe General ManagerSecurity Paper Mill Hoshangabad (M.P.)

Dear Sir,

Thanks a lot for your verbal inquire for piping Fabrication and other work-at E.T. plant, New Filtration

plant and Black liquor plant, Here is the Budgetary Estimate as.

Scooe of Work at E.T, plant, New Filtration plant and Black liouor plant:

A. lnstallation of 2" pipe line at Black liquor plant:

1. Shifting Material of 2" pipe line from store to Black liquor plant.

2. Removing of old 2" pipe line from sludge pump to last arriation tank.

3. Fabricate new 2" pipe line for sludge pump to last arriation tank.

4. lnstallation of 2" pipe line from sludge pumps to last arriation tank.

5. Do welding work in 2" pipe line such as taffit and flange welding.

6. To fitted 2" gate valve in 2" pipe line for all arriation tank.

7. Making support for 2" pipe line.8. Making clamp for 2" pipe line.

9. Fitted 2" pipe line on both sludge pump.

10. Welding machine, welding electrode and gas cutter in contractor scope.

11. All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 8000.00

B. lnstallation of 6" pipe line at E'T' plant Near Thickener No. 2:

1. Shifting Material of 6" pipe line from store to E'T. Plant.

2. Removing of old 5" pipe line thickener no.2 to screw pump house in 50 feet length.

3. Fabricate new 5" pipe line for thickener no.2 to screw pump hose in 50 feet length.

4. lnstallation of 6" thickener no.2 to screw pump hose in 50 feet length.

5. Do welding work in 6" pipe line such as taffit and flange welding.

6. To fitted 6" gate valve in 6" pipe line.

7. Making support for 6" pipe line.

8. Making clamp for 6" pipe line.

9. Connected 6" pipe line in Sump pump no.4 delivery line'

l0.Welding machine, welding electrode and gas cutter in contractor scope

11.All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 7000.00

Date: 19.10.15

C. Installation work of new centrifugal pump on Under Ground water tank No,2 (UGT No'2) at New

Filtration plant:

1. Shifting work of new pump from store to UGT NO'2.

2. Fabricate bottom frame and mounted.

3. Erection work of new pump.

4. Do proper levelling work of pump.

5. Do proper alignment of pump and motor.6. Shifting material of suction and delivery pipeline from store to UGT No.2. f(ffi41c

Page 2: QTN SPM ETP

,

/7. Fabricate new suction line of pump from UGT No'2 to pump ?8. lnstallation of new suction line on pump.

9. Fabricated new delivery pipeline from pump to overhead tank line'

10. lnstallation work of S.S. delivery pipeline on pump'

1-1. Making support of suction and delivery pipeline'

12. Painting york in pump bottom frame, suction and delivery pipeline'

13. Making Concrete foundation for pump.

14. Welding machine, welding electrode and gas cutter in contractor scope'

15. All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 19000'00

2. Removing of old 1" damaged pipe line from sump pump house to U'G'T' No'1'

3. Fabricate new 1" pipe line for sump pump house to U'G'T' No'1'

4. lnstallation of 1" pipe line from sump pump house to U'G'T' No'1'

5. Do welding work in 1" PiPe line.

6. To fitted 1" gate valve in 1" pipe line near centrifugal pump'

7. Making support for 1" PiPe line.

8. Making clamp for 1" PiPe line.

9. Fitted 1" pipe line on centrifugal pump line'

l0.Welding machine, welding electrode and gas cutter in contractor scope'

11. All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 7000'00

E. lnstallation of Gantrv on under Ground water Tank No.1 (U.G.T. No' 1l at new filtration plant:

f . Sf,ittit e Mrt.rial of Gantry from scrap yard & store to new filtration plant'

2. Making new gantry for removing pump from U'G'T' No'1'

3.rMakine+nos.ofchannelin2.5meterlengthfroml00mm,|,sectionbeambygascutting&welding work.

+. ruakingznos.of channe| in3 meter length for oriental support from 1oo mm '1, section beam by

gas cutting & welding work.

s. ilakinc 2 nos. of channel in 2.5 meter length for support of gantry at both side from 100 mm 'l'

section beam by gas cutting & welding work'

6. Making moving trolley of gantry for chain pulley'

7. Mounted moving trolley on gantry.

8. Erection work of gantry in 15 feet height'

9. Grouted gantry near U.G.T. No. 1.

10. Do painting work on gantrY.

11. Making support of gantry in proper manner'

12. Welding machine, welding electrode and gas cutter in contractor scope'

13. All material will be provided by S'P.M'

AllaboveworkourlaborRatewithtools&tackle&consumableitems:12000'00

F, lnstallation of Cantilever santrv on Thickener No'1 at E'T' Plant:

illriftlng N'l.t"rial of cantilever Gantry from scrap yard & store to E'T' Plant'

2. Making new cantilever gantry for loading and unloading of thickener gear box '

3. Making 2 nos. of channel in 4 meter length from 1oo mm 'l' section beam by gas cutting

Welding work.4.Making2nos.ofchannelinl.5meterlengthfororientalsupportfroml00mm'l,sectionbeam

&

1. Shifting Material of 1" pipe line from store to new filtration plant'

Page 3: QTN SPM ETP

/by gas cutting & welding work. i

5. Making box of 4 meter length by lapping of 2 nos. 'l' section beam by weldinf work.

6. Do welding work in 1.5 meter channel and 4 meter length box.

7. Fitted cross basing angle in cantilever gantry by welding work.

8. Making Huck of cantilever gantry for chain pulley'

9. Mounted huck on cantilever gantry.r10. Erection-work of cantilever gantry in 4 meter height.

9. Grouted cantilever gantry near Thickener no.1.

10. Do painting work on cantilever gantry.

11. Making support of cantilever gantry in proper manner.

12. Welding machine, welding electrode and gas cutter in contractor scope.

13. All material will be provided by S.P.M'

All above work our labor Rate with tools & tackle & consumable items: 7000.00

1. Shifting Material of cantilever Gantry from scrap yard & store to E.T. Plant'

2. Making new cantilever gantry for loading and unloading of thickener gear box .

3. Making 2 nos. of channel in 5 meter length from 100 mm 'l' section beam by gas cutting &

Welding work.4. Making 2 nos. of channel in 2 meter length for oriental supportfrom 100 mm'l'section beam

by gas cutting & welding work.5. Making box of 5 meter length by lapping of 2 nos. 'l' section beam by welding work'

6. Do welding work in 2 meter cha nnel and 4 meter length box.

7. Fitted cross basing angle in cantilever gantry by welding work.

8. Making Huck of cantilever gantry for chain pulley.

9. Mounted huck on cantilever gantry.

10. Erection work of cantilever gantry in 5 meter height.

9. Grouted cantilever gantry near Thickener no.l,.

10. Do painting work on cantilever gantry.

11. Making support of cantilever gantry in proper manner.

12, Welding machine, welding electrode and gas cutter in contractor scope.

13. All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 6000.00

Shifting Material of cantilever Gantry from scrap yard & store to E'T. Plant.

Making new cantilever gantry for loading and unloading of thickener gear box .

Making 2 nos. of channel in 3.5 meter length from 100 mm 'l' section beam by gas cutting &

Welding work.4. Making 2 nos. of channel in 1.5 meter length

by gas cutting & welding work.

for oriental support from 100 mm 'l'section beam

5. Making box of 3.5 meter length by lapping of 2 nos' 'l'section beam

6. Do welding work in 1.5 meter channel and 3.5 meter length box.

7. Fitted cross basing angle in cantilever gantry by welding work.

8. Making Huck of cantilever gantry for chain pulley.

9. Mounted huck on cantilever gantry'

10. Erection work of cantilever gantry in 3'5 meter height'

9. Grouted cantilever gantry near Thickener no.1.

10. Do painting work on cantilever gantry.

11. Making support of cantilever gantry in proper manner.

by welding work.

L.

3.

Page 4: QTN SPM ETP

/12. Welding machine, welding electrode and gas cutter in contractor scope. *13. All material will be provided by s.P.M. i*

All above work our labor Rate with tools & tackle & consumable items: 8000.00

l. lnstallation of Cantilever gantrv between equalization tank no, 5 & 6 at E.T. Plant:

1. Shifting Material of cantilever Gantry from scrap yard & store to E.T. Plant.

2. Making n"ew cantilever gantry for loading and unloading of thickener gear box .

3. Making 2 nos. of channel in 3.5 meter length from 100 mm'l'section beam by gas cutting &Welding work.

4. Making 2 nos. of channel in 1.5 meter length for oriental support from 100 mm 'l' section bea m

by gas cutting & welding work.5. Making box of 3.5 meter length by lapping of 2 nos. 'l' section beam by welding work.

6. Do welding work in 1.5 meter channel and 3.5 meter length box.

7. Fitted cross basing angle in cantilever gantry by welding work.8. Making Huck of cantilever gantry for chain pulley.

9. Mounted huck on cantilever gantry.

10. Erection work of cantilever gantry in 3.5 meter height.9. Grouted cantilever gantry near Thickener no.1.

10. Do painting work on cantilever gantry.

11. Making support of cantilever gantry in proper manner.

1-2. Welding machine, welding electrode and gas cutter in contractor scope.

13. All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 7000.00

i. lnstallation of 3/ 4" S.S pipe line for PAC chemical in 3 nos. tank at Water treatment plant :

1. Shifting Material of 3/4" S.S. pipe line from store to Water treatment plant.

2. Removing of old 3/4" pipe line of all 3 nos. tank from PAC tank to flux mixer cha m ber in length 180 feet.

3. Fabricate new 3/4" S.S. pipe line of all 3 nos. tank for PAC tank to flux mixer cha m ber.

4. lnstallation of 3/4" S.S. pipe line of all 3 nos. tank from PAC tank to flux mixer chamber in length 150 feet

with 2" header.5. Do welding work in 3/4" S.S. pipe line such as taffit and flange welding.

6. To fitted 3/4" PVC ball valve in 3/4" S.S. pipe line for all PAC tank.

7. tnstallation of cable trench for support of 3/4" S.S. pipeline from PAC tank to flux mixer chamber in length

150 feet8. Making support for cable trench.9. Making clamp for 3/4" pipe line.9. Fitted controlling valve of 3/4" near flux mixer chamber in 3/4" pipe line for dossing of PAC chemical in

flux mixer chamber.10. Welding machine, welding electrode and gas cutter in contractor scope.

11. All material will be provided by S.P.M.

All above work our labor Rate with tools & tackle & consumable items: 19000.00

Grand Total Amount of All above work: 100000.00

Thanking you Yours faithfullY

Shakti Engineering Works & Services

Mls ShaktiEngtneenngWorks & Services

GARAGE LINE

HoSHANGAEAD (M.P i .