Top Banner
1 Training Session on Energy Training Session on Energy Equipment Equipment Pumps & Pumping Pumps & Pumping Systems Systems Presentation from the “Energy Efficiency Guide for Industry in Asia” www.energyefficiencyasia.org © UNEP 2006 UNEP 2006 E l e c t r i c a l E q u i p m e n t / P u m p s
40
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Pumps Senatorlibya

1

Training Session on Energy Training Session on Energy EquipmentEquipment

Pumps & Pumping Pumps & Pumping SystemsSystems

Presentation from the

“Energy Efficiency Guide for Industry in Asia”

www.energyefficiencyasia.org

©© UNEP 2006 UNEP 2006

El ect ri cal E

quipment /

Pum

ps

Page 2: Pumps Senatorlibya

2

©© UNEP 2006 UNEP 2006

Training Agenda: PumpsTraining Agenda: Pumps

Introduction

Type of pumps

Assessment of pumps

Energy efficiency opportunities

El ect ri cal E

quipment /

Pum

ps

Page 3: Pumps Senatorlibya

3

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

• 20% of world’s electrical energy demand

• 25-50% of energy usage in some industries

• Used for

• Domestic, commercial, industrial and agricultural services

• Municipal water and wastewater services

What are Pumping SystemsEl ect ri cal E

quipment /

Pum

ps

Page 4: Pumps Senatorlibya

4

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

Objective of pumping system

What are Pumping SystemsEl ect ri cal E

quipment /

Pum

ps

(US DOE, 2001)

• Transfer liquid from source to destination

• Circulate liquid around a system

Page 5: Pumps Senatorlibya

5

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

• Main pump components• Pumps

• Prime movers: electric motors, diesel engines, air system

• Piping to carry fluid

• Valves to control flow in system

• Other fittings, control, instrumentation

• End-use equipment• Heat exchangers, tanks, hydraulic machines

What are Pumping SystemsEl ect ri cal E

quipment /

Pum

ps

Page 6: Pumps Senatorlibya

6

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

• Head• Resistance of the system

• Two types: static and friction

• Static head• Difference in height between

source and destination

• Independent of flow

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

destination

source

Static

head

Statichead

Flow

Page 7: Pumps Senatorlibya

7

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

• Static head consists of• Static suction head (hS): lifting liquid relative to

pump center line

• Static discharge head (hD) vertical distance between centerline and liquid surface in destination tank

• Static head at certain pressure

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

Head (in feet) = Pressure (psi) X 2.31 Specific gravity

Page 8: Pumps Senatorlibya

8

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

• Friction head• Resistance to flow in pipe and fittings

• Depends on size, pipes, pipe fittings, flow rate, nature of liquid

• Proportional to square of flow rate

• Closed loop system only has friction head(no static head)

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

Frictionhead

Flow

Page 9: Pumps Senatorlibya

9

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

In most cases:

Total head = Static head + friction head

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

Systemhead

Flow

Static head

Frictionhead

Systemcurve

System head

Flow

Static head

Friction head

Systemcurve

Page 10: Pumps Senatorlibya

10

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

Pump performance curve

• Relationship between head and flow• Flow increase

• System resistance increases

• Head increases

• Flow decreases to zero

• Zero flow rate: risk of pump burnout

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

Head

Flow

Performance curve for centrifugal pump

Page 11: Pumps Senatorlibya

11

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

Pump operating point

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

• Duty point: rate of flow at certain head

• Pump operating point: intersection of pump curve and system curve

Flow

Head

Static head

Pump performance curve

System curve

Pump operating point

Page 12: Pumps Senatorlibya

12

©© UNEP 2006 UNEP 2006

IntroductionIntroduction

Pump suction performance (NPSH)

• Cavitation or vaporization: bubbles inside pump

• If vapor bubbles collapse

• Erosion of vane surfaces

• Increased noise and vibration

• Choking of impeller passages

• Net Positive Suction Head

• NPSH Available: how much pump suction exceeds liquid vapor pressure

• NPSH Required: pump suction needed to avoid cavitation

Pumping System CharacteristicsEl ect ri cal E

quipment /

Pum

ps

Page 13: Pumps Senatorlibya

13

©© UNEP 2006 UNEP 2006

Training Agenda: PumpsTraining Agenda: Pumps

Introduction

Type of pumps

Assessment of pumps

Energy efficiency opportunities

El ect ri cal E

quipment /

Pum

ps

Page 14: Pumps Senatorlibya

14

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Classified by operating principle

Pump ClassificationEl ect ri cal E

quipment /

Pum

ps

DynamicPositive

Displacement

Centrifugal Special effect Rotary Reciprocating

Internal gear

External gear

LobeSlide vane

Others (e.g. Impulse, Buoyancy)

Pumps

DynamicPositive

Displacement

Centrifugal Special effect Rotary Reciprocating

Internal gear

External gear

LobeSlide vane

Others (e.g. Impulse, Buoyancy)

Pumps

Page 15: Pumps Senatorlibya

15

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Positive Displacement PumpsEl ect ri cal E

quipment /

Pum

ps

• For each pump revolution• Fixed amount of liquid taken from one end

• Positively discharged at other end

• If pipe blocked• Pressure rises

• Can damage pump

• Used for pumping fluids other than water

Page 16: Pumps Senatorlibya

16

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Positive Displacement PumpsEl ect ri cal E

quipment /

Pum

ps

• Reciprocating pump• Displacement by reciprocation of piston

plunger

• Used only for viscous fluids and oil wells

• Rotary pump• Displacement by rotary action of gear, cam

or vanes

• Several sub-types

• Used for special services in industry

Page 17: Pumps Senatorlibya

17

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Dynamic pumpsEl ect ri cal E

quipment /

Pum

ps

• Mode of operation• Rotating impeller converts kinetic energy

into pressure or velocity to pump the fluid

• Two types• Centrifugal pumps: pumping water in

industry – 75% of pumps installed

• Special effect pumps: specialized conditions

Page 18: Pumps Senatorlibya

18

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Centrifugal PumpsEl ect ri cal E

quipment /

Pum

ps

How do they work?

(Sahdev M)

• Liquid forced into impeller

• Vanes pass kinetic energy to liquid: liquid rotates and leaves impeller

• Volute casing converts kinetic energy into pressure energy

Page 19: Pumps Senatorlibya

19

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Centrifugal PumpsEl ect ri cal E

quipment /

Pum

ps

Rotating and stationary components

(Sahdev)

Page 20: Pumps Senatorlibya

20

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Centrifugal PumpsEl ect ri cal E

quipment /

Pum

ps

Impeller Sahdev)

• Main rotating part that provides centrifugal acceleration to the fluid

• Number of impellers = number of pump stages

• Impeller classification: direction of flow, suction type and shape/mechanical construction

Shaft• Transfers torque from motor to impeller during pump

start up and operation

Page 21: Pumps Senatorlibya

21

©© UNEP 2006 UNEP 2006

Type of PumpsType of Pumps

Centrifugal PumpsEl ect ri cal E

quipment /

Pum

ps

Casings

Volute Casing (Sahdev)• Functions• Enclose impeller as “pressure vessel”

• Support and bearing for shaft and impeller

• Volute case• Impellers inside casings

• Balances hydraulic pressure on pump shaft

• Circular casing• Vanes surrounds impeller

• Used for multi-stage pumps

Page 22: Pumps Senatorlibya

22

©© UNEP 2006 UNEP 2006

Training Agenda: PumpsTraining Agenda: Pumps

Introduction

Type of pumps

Assessment of pumps

Energy efficiency opportunities

El ect ri cal E

quipment /

Pum

ps

Page 23: Pumps Senatorlibya

23

Assessment of pumpsAssessment of pumps

• Pump shaft power (Ps) is actual horsepower delivered to the pump shaft

• Pump output/Hydraulic/Water horsepower (Hp) is the liquid horsepower delivered by the pump

How to Calculate Pump PerformanceEl ect ri cal E

quipment /

Pum

ps

Hydraulic power (Hp):Hp = Q (m3/s) x Total head, hd - hs (m) x ρ (kg/m3) x g (m/s2) / 1000

Pump shaft power (Ps):Ps = Hydraulic power Hp / pump efficiency ηPump

Pump Efficiency (ηPump): ηPump = Hydraulic Power / Pump Shaft Power

©© UNEP 2006 UNEP 2006

hd - discharge head hs – suction head, ρ - density of the fluid g – acceleration due to gravity

Page 24: Pumps Senatorlibya

24

©© UNEP 2006 UNEP 2006

Assessment of pumpsAssessment of pumps

• Absence of pump specification data to assess pump performance

• Difficulties in flow measurement and flows are often estimated

• Improper calibration of pressure gauges & measuring instruments

• Calibration not always carried out

• Correction factors used

Difficulties in Pump AssessmentEl ect ri cal E

quipment /

Pum

ps

Page 25: Pumps Senatorlibya

25

©© UNEP 2006 UNEP 2006

Training Agenda: PumpsTraining Agenda: Pumps

Introduction

Type of pumps

Assessment of pumps

Energy efficiency opportunities

El ect ri cal E

quipment /

Pum

ps

Page 26: Pumps Senatorlibya

26

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

1. Selecting the right pump

2. Controlling the flow rate by speed variation

3. Pumps in parallel to meet varying demand

4. Eliminating flow control valve

5. Eliminating by-pass control

6. Start/stop control of pump

7. Impeller trimming

Electri cal E

quipment /

Pum

ps

Page 27: Pumps Senatorlibya

27

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

1. Selecting the Right PumpEl ect ri cal E

quipment /

Pum

ps

Pump performance curve for centrifugal pump

BEE India, 2004

Page 28: Pumps Senatorlibya

28

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

1. Selecting the Right PumpEl ect ri cal E

quipment /

Pum

ps

• Oversized pump• Requires flow control (throttle valve or by-

pass line)

• Provides additional head

• System curve shifts to left

• Pump efficiency is reduced

• Solutions if pump already purchased• VSDs or two-speed drives

• Lower RPM

• Smaller or trimmed impeller

Page 29: Pumps Senatorlibya

29

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

2. Controlling Flow: speed variation

El ect ri cal E

quipment /

Pum

ps

Explaining the effect of speed

• Affinity laws: relation speed N and

• Flow rate Q N

• Head H N2

• Power P N3

• Small speed reduction (e.g. ½) = large power reduction (e.g. 1/8)

Page 30: Pumps Senatorlibya

30

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

El ect ri cal E

quipment /

Pum

ps

Variable Speed Drives (VSD)

• Speed adjustment over continuous range

• Power consumption also reduced!

• Two types• Mechanical: hydraulic clutches, fluid couplings,

adjustable belts and pulleys

• Electrical: eddy current clutches, wound-rotor motor controllers, Variable Frequency Drives (VFDs)

2. Controlling Flow: speed variation

Page 31: Pumps Senatorlibya

31

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

El ect ri cal E

quipment /

Pum

ps

Benefits of VSDs

• Energy savings (not just reduced flow!)

• Improved process control

• Improved system reliability

• Reduced capital and maintenance costs

• Soft starter capability

2. Controlling Flow: speed variation

Page 32: Pumps Senatorlibya

32

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

3. Parallel Pumps for Varying DemandEl ect ri cal E

quipment /

Pum

ps

• Multiple pumps: some turned off during low demand

• Used when static head is >50% of total head

• System curvedoes not change

• Flow rate lowerthan sum ofindividual flow rates

(BPMA)

Page 33: Pumps Senatorlibya

33

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

4. Eliminating Flow Control ValveEl ect ri cal E

quipment /

Pum

ps

• Closing/opening discharge valve (“throttling”) to reduce flow

• Head increases: does not reduce power use

• Vibration and corrosion: high maintenance costs and reduced pump lifetime

(BPMA)

Page 34: Pumps Senatorlibya

34

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

5. Eliminating By-pass ControlEl ect ri cal E

quipment /

Pum

ps

• Pump discharge divided into two flows

• One pipeline delivers fluid to destination

• Second pipeline returns fluid to the source

• Energy wastage because part of fluid pumped around for no reason

Page 35: Pumps Senatorlibya

35

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

6. Start / Stop Control of PumpEl ect ri cal E

quipment /

Pum

ps

• Stop the pump when not needed

• Example:

• Filling of storage tank

• Controllers in tank to start/stop

• Suitable if not done too frequently

• Method to lower the maximum demand (pumping at non-peak hours)

Page 36: Pumps Senatorlibya

36

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

7. Impeller TrimmingEl ect ri cal E

quipment /

Pum

ps

• Changing diameter: change in velocity

• Considerations

• Cannot be used with varying flows

• No trimming >25% of impeller size

• Impeller trimming same on all sides

• Changing impeller is better option but more expensive and not always possible

Page 37: Pumps Senatorlibya

37

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

7. Impeller TrimmingEl ect ri cal E

quipment /

Pum

ps

Impeller trimming and centrifugal pump performance

(BEE India, 2004)

Page 38: Pumps Senatorlibya

38

©© UNEP 2006 UNEP 2006

Energy Efficiency OpportunitiesEnergy Efficiency Opportunities

Comparing Energy Efficiency Options

El ect ri cal E

quipment /

Pum

ps

Parameter Change control valve

Trim impeller VFD

Impeller diameter

430 mm 375 mm 430 mm

Pump head 71.7 m 42 m 34.5 m

Pump efficiency 75.1% 72.1% 77%

Rate of flow 80 m3/hr 80 m3/hr 80 m3/hr

Power consumed

23.1 kW 14 kW 11.6 kW

Page 39: Pumps Senatorlibya

39

Training Session on Energy Training Session on Energy EquipmentEquipment

Pumps & Pumping Pumps & Pumping SystemsSystems

THANK YOUTHANK YOU

FOR YOUR ATTENTIONFOR YOUR ATTENTION

©© UNEP 2006 UNEP 2006

El ect ri cal E

quipment /

Pum

ps

Page 40: Pumps Senatorlibya

40

© UNEP 2006© UNEP 2006

Disclaimer and ReferencesDisclaimer and References

El ect ri cal E

quipment /

Pum

ps

• This PowerPoint training session was prepared as part of the project “Greenhouse Gas Emission Reduction from Industry in Asia and the Pacific” (GERIAP). While reasonable efforts have been made to ensure that the contents of this publication are factually correct and properly referenced, UNEP does not accept responsibility for the accuracy or completeness of the contents, and shall not be liable for any loss or damage that may be occasioned directly or indirectly through the use of, or reliance on, the contents of this publication. © UNEP, 2006.

• The GERIAP project was funded by the Swedish International Development Cooperation Agency (Sida)

• Full references are included in the textbook chapter that is available on www.energyefficiencyasia.org