Top Banner

Click here to load reader

PROFESSIONAL ESPRESSO K3 K3 ELITE K6 K6 SILENZIO K6 PB

Feb 14, 2017

ReportDownload

Documents

lamkhanh

  • coffee grindersinstructions manual

    PROFESSIONAL ESPRESSO

    K3

    K3 ELITE

    K6

    K6 SILENZIO

    K6 PB

    K8 SILENZIO

    K10 CONIC

    K10 CONIC PB

    K10 MASTER CONIC

    K10 MASTER CONIC PB

  • index1. SAFETY MEASURES 5

    2. DESCRIPTION 7

    3. INSTRUCTIONS 8

    4. IDENTIFICATION 8

    5. TECHNICAL CARACTERISTICS 9

    6. EXTERNAL COMPONENTS 11

    7. INSTALLATION 13

    8. OPERATION 15

    9. CONFIGURATION 18

    10. CLEANING 20

    11. MAINTENANCE 21

    12. EC CONFORMITY 28

  • K01068 | v. 09/02/2017 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS 5

    1. SAFETY MEASURES

    NOTE: The manufacturer will not be held responsible for any damages resulting from improper use of the equipment, or for not following the safety measures as outlined below.

    Safety measures incorporated into our grinders:

    Special screw to maintain the hopper fixed in place.

    Access restrictor in the grind group.

    Owners: Please pay careful attention with the following instructions:

    The grinder should be used exclusively for the function for which it was designed: grinding whole bean coffee.

    Do not use this grinder to grind other types of food products such as dry fruit, sugar or spices.

    This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

    Any other use of the machine will be considered improper and dangerous.

  • ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 09/02/2017 | K010686

    Do not put liquids in contact with internal or external parts of this grinder while ON or OFF, with the exception of parts expressly outlined in the CLEANING section of this manual. If liquids do come in contact with the grinder, immediately disconnect electrical connection and carefully clean the affected areas. If it is necessary to access the interior parts of the grinder, contact your local service professional.

    In case of any damage to parts or components, we recommend contacting your local service professional to help with repair or replacement of such parts, thereby guaranteeing the maintenance of the security standards of the grinder.

    If the supply cord is damaged, it must be repalced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

    Only an authorized distributor should replace the main power cable of the grinder.An equipotential grounding lug is provided with this unit. Some countries require the grounding lug be properly attached to the rear of the frame by the authorized installer. The installation location is marked by the equipotential bonding symbol (5021 of IEC 60417-1) on the units frame. (Only for MASTER models).

  • K01068 | v. 09/02/2017 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS 7

    SOUND DECIBEL LEVEL

    The level of sound emitted in different models is:

    Sound decibel level With coffee

    K3, K3 ELITE 75,3 dB

    K6, K6 PB 73,2 dB

    K6 SILENZIO 68,7 dB

    K8 SILENZIO 70,2 dB

    K10 CONIC, K10 CONIC PB 68,4 dB

    K10 MASTER CONIC, K10 MASTER CONIC PB 67,8 dB

    2. DESCRIPTION

    Your new grinder has been designed using the most sophisticated technologies in

    existence. The result is a product of high quality that offers the assurance of the best

    results possible. Our products are manufactured by hand, one by one, following the

    strictest quality requirements. In the manufacturing process, we use only the highest

    quality materials (aluminum, stainless steel, etc.) especially designated for being in

    contact with food stuff.

    For the optimum functionality of the grinder models described in this user manual,

    the maximum work cycles are as follows:

    ModelWorking cycle

    ON OFF

    K3, K3 ELITE 2 minutes 10 minutes

    K6, K6 SILENZIO, K6 PB 5 minutes 10 minutes

    K8 SILENZIO, K10 CONIC, K10 CONIC PB 2 minutes 10 minutes

    K10 MASTER CONIC, K10 MASTER CONIC PB 2 minutes 10 minutes

  • ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 09/02/2017 | K010688

    3. INSTRUCTIONS

    3.1. This manual is designed to provide the necessary information to correctly install, use and maintain the grinder, as well as to highlight precautions for users to

    keep in mind. To ensure the best operation of the coffee grinder, please follow the

    instructions as outlined in this manual. This manual should be saved for the life of the

    grinder, and should always be at the disposal of the operator.

    3.2. This manual contains special terminology such as:

    Words in BOLD indicate important points or terminology.

    Numbers in parenthese after a word, indicate the location of this item in a parts diagram.

    Example: ( ) - Hopper lid

    Icons:

    Information Atention Equipotential symbol

    4. IDENTIFICATION

    In the grinder information plaque is the following manufacturing/product information.

    NOTE: The manufacturer reserves the right to change components/configurations of any model, according to the different geographic market demands.

  • K01068 | v. 09/02/2017 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS 9

    5. TECHNICAL CARACTERISITICS

    5.1. Usage

    The coffee grinders are intended for use on commercial premises and facilities where

    ground coffee is required, or in small stores that sell coffee. The grinder must only be

    used to grind coffee beans. Any use other than this will be considered improper and

    dangerous.

    NOTE: The manufacturer will not be held responsible for any damages resulting from improper use of the equipment, or for not following the safety measures as outlined below.

    5.2. Technical data

    Model100 V50 Hz

    100 V60 Hz

    110 V60 Hz

    220 V60 Hz

    230 V50 Hz

    240 V50 Hz

    380 V 50 Hz

    K3,K3 ELITE

    Electricpower 200 200 175 210 210 225 (W)

    Spinspeed 1.320 1.620 1.640 1.640 1.340 1.345 rpm

    K6,K6 SILENZIO,K6 PB

    Electricpower 230 230 250 265 240 255 (W)

    Spinspeed 1.320 1.600 1.650 1.700 1.395 1.400 rpm

    K8 SILENZIO

    Electricpower 600 700 700 730 610 630 (W)

    Spinspeed 1.270 1.530 1.580 1.500 1.290 1.310 rpm

    K10 CONIC,K10 CONIC PB

    Electricpower 620 620 800 620 800 800 465 (W)

    Spinspeed 335 388 400 375 325 331 342,5 rpm

    K10 MASTER CONIC,K10 MASTER CONIC PB

    Electricpower 750 770 800 780 950 820 (W)

    Spinspeed 332,5 400 412,5 410 342,5 345 rpm

  • ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 09/02/2017 | K0106810

    Model

    K3,K3 ELITE

    K6, K6 SILENZIO,

    K6 PBK8 SILENZIO

    K10 CONIC,K10 CONIC

    PB

    K10 MASTER CONIC,

    K10 MASTER CONIC PB

    Burrs2.3

    58

    2.5

    64

    3.3

    83

    2.65

    Conic 68

    2.65

    Conic 68

    in

    mm

    Production*

    50Hz

    8.2

    3,7

    13

    6

    33

    15

    33

    15

    37

    17

    lb/h

    Kg/h

    Production*

    60Hz

    9.5

    4,3

    15

    7

    38.5

    17,5

    38.5

    17,5

    44

    20

    lb/h

    Kg/h

    Hopper

    capacity

    1.76

    38.5

    3.74

    1700

    3.74

    1700

    3.74

    1700

    3.74

    1700

    lb

    gr

    Mini-hopper

    capacity

    (optional)

    0.6

    275

    0.6

    275

    0.6

    275

    0.6

    275

    0.6

    275

    lb

    gr

    Doser

    capacity

    0.66

    300

    0.66

    300

    0.66

    300

    0.66

    300

    0.66

    300

    lb

    gr

    Doser lever

    position

    right

    left

    right

    left

    right

    left

    right

    left

    right

    left

    Net weight15.07

    6,85

    25.47

    11,58

    28.6

    13

    37.24

    16,93

    37.24

    16,93

    lb

    Kg

    Height WidthDepth

    19.56.7

    14.37

    495 170 365

    258.46

    15.74

    635215400

    258.46

    15.74

    635215400

    258.46

    15.74

    635215400

    26.778.46

    15.74

    680 215 400

    in mm in mm in mm in mm in mm

    Mini-hopper Height WidhtDepth

    16.5 6.7

    14.37

    420170365

    228.46

    15.74

    560215400

    228.46

    15.74

    560215400

    228.46

    15.74

    560215400

    23.828.46

    15.74

    605 215 400

    in mm in mm in mm in mm in mm

    * Production is based on a medium-roasted coffee and an Espresso grind.

  • K01068 | v. 09/02/2017 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS 11

    6. EXTERNAL COMPONENTS

    K10 MASTER CONIC

  • ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 09/02/2017 | K0106812

    K3 ELITE

  • K01068 | v. 09/02/2017 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS 13

    7. INSTALLATION

    7.1. General Warnings

    The person installing the grinder should carefully read this instruction manual

    before installation. The installation of this machine should be completed by

    qualified and auth

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.