PIP_PS100119_Rev00_Eng © 2010-2019 Inflatable Packers International Inflatable Packers International Made differently to perform better www.ipipackers.com Production Injection Packer (PIP) IPI's Production Injection Packer (PIP) incorporates the same valving used on ICP and PIBP in conjunction with IPI's inflatable packer elements, well known for their ability to recover to the uninflated diameter, which is critical to operational success when retrieving. The PIP is an innovative use of IPI's existing technologies, to provide reliable, retrievable packers for both production and injection purposes, which can also be used for zonal isolation, testing, stimulation and selective acidizing. Inflation Valve OD Packer OD Equivalent TBG Diameter - OD (ID) Minimum ID through the tool Maximum Tensile Strength in mm in mm in in mm Kips kN 3.5 89 3.5 89 2.375 2 50.8 33 146.8 4 102 4.5 114 5 127 4.5 114 4.5 114 3.5 3 76.2 173 773 5 127 5.5 140 7 178 5.5 140 5.5 140 4.5 4 101.6 134 597 7 178 7.5 197 8 203 SIZES: * PIP is available with different grades of tubing ** Safety factor of 1.6 has been considered for tensile limit calculations ■ ■ ■ APPLICATIONS: Zonal isolation operations/ Scab liner Bottom hole shut-off operation in open or cased hole conditions T est, treat or squeeze operations Selective acidizing Thief zone treatment ■ ■ ■ ■ ■ FEATURES: A single shot retrievable tubing packer - drop ball inflate mechanism Three different deflation mechanisms (drop ball, rotate and pull deflate) to suit the application based on DLS and depth Incorporates IPI PIBP/ICP inflation valve system Modular design – multiple element sizes have common chassis DuraGRIP™ elements available for operations requiring anchoring – DuraGRIP™ packers feature an external steel wire layer designed to maximize bi-directional anchoring whilst maintaining bi-directional sealing, for optimal differential pressure holding capability Conveyed on coiled tubing or work string (DP, tubing) ■ ■ ■ Houston, TX Americas Ph: +1 713 389 0018 Perth, Australia Ph: +61 8 9204 2448 Head Office Dubai, UAE Middle East Ph: +971 50 55 29 273 Singapore Asia Pacific Ph: +65 8322 1845 Sofia, Bulgaria Europe & Africa Ph: +359 2 444 23 86
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PIP_PS100119_Rev00_Eng© 2010-2019 Inflatable Packers International
Inflatable Packers International
Made differently to perform better
www.ipipackers.com
Production Injection Packer (PIP)
IPI's Production Injection Packer (PIP) incorporates the same valving used on ICP and PIBP
in conjunction with IPI's inflatable packer elements, well known for their ability to recover to
the uninflated diameter, which is critical to operational success when retrieving. The PIP is
an innovative use of IPI's existing technologies, to provide reliable, retrievable packers for
both production and injection purposes, which can also be used for zonal isolation, testing,
stimulation and selective acidizing.
Inflation Valve OD Packer ODEquivalent TBG
Diameter - OD (ID)Minimum ID
through the toolMaximum Tensile
Strength
in mm in mm in in mm Kips kN
3.5 89
3.5 89
2.375 2 50.8 33 146.84 102
4.5 114
5 127
4.5 114
4.5 114
3.5 3 76.2 173 7735 127
5.5 140
7 178
5.5 140
5.5 140
4.5 4 101.6 134 5977 178
7.5 197
8 203
SIZES:
* PIP is available with different grades of tubing
** Safety factor of 1.6 has been considered for tensile limit calculations
■
■
■
APPLICATIONS:
Zonal isolation operations/ Scab liner
B ottom hole shut-off operation in open or cased hole conditions
T est, treat or squeeze operations
S elective acidizing
T hief zone treatment
■
■
■
■
■
FEATURES:A single shot retrievable tubing packer - drop ball inflate mechanism
T hree different deflation mechanisms (drop ball, rotate and pull deflate) to suit
the application based on DLS and depth
I ncorporates IPI PIBP/ICP inflation valve system
M odular design – multiple element sizes have common chassis
D uraGRIP™ elements available for operations requiring anchoring – DuraGRIP™ packers
feature an external steel wire layer designed to maximize bi-directional anchoring whilst
maintaining bi-directional sealing, for optimal differential pressure holding capability
C onveyed on coiled tubing or work string (DP, tubing)
■
■
■
Houston, TX
Americas
Ph: +1 713 389 0018
Perth, AustraliaPh: +61 8 9204 2448
Head Office
Dubai, UAEMiddle East
Ph: +971 50 55 29 273
SingaporeAsia Pacific
Ph: +65 8322 1845
Sofia, BulgariaEurope & Africa
Ph: +359 2 444 23 86
Differential Pressure Rating vs. Hole Size
Inflatable Packers International
Made differently to perform better
www.ipipackers.com
PIP_PS100119_Rev00_Eng© 2010-2019 Inflatable Packers International
Production Injection Packer (PIP)
5.13.5 3.9 4.3 4.7 6.75.5 5.9 6.3 8.37.1 7.5 7.9 9.88.7 9.1 9.4
13090 100 110 120 170140 150 160 210180 190 200 250220 230 240
Inflated Diameter, mm
Inflated Diameter, in
Allo
wa
ble
Dif
fere
nti
al P
res
su
re, p
si
Allo
wa
ble
Dif
fere
nti
al P
res
su
re, b
ar
552
483
414
345
276
207
138
69
0
3,000
8,000
7,000
6,000
5,000
4,000
0
2,000
1,000
3.5" Packer Element
4.5" Packer Element
5" Packer Element
5.5" Packer Element
3.5" Chassis with:
6.73.5 4.3 5.1 5.9 9.87.5 8.3 9.1 13.010.6 11.4 12.2 16.113.8 14.6 15.4
17090 110 130 150 250190 210 230 330270 290 310 410350 370 390
Inflated Diameter, mm
Inflated Diameter, in
All
ow
ab
le D
iffe
ren
tial
Pre
ssu
re,
psi
All
ow
ab
le D
iffe
ren
tial
Pre
ssu
re,
bar
552
483
414
345
276
207
138
69
0
3,000
8,000
7,000
6,000
5,000
4,000
0
2,000
1,000
4.5" Packer Element
5" Packer Element
5.5" Packer Element
7" Packer Element
4.5" Chassis with:
6.73.5 4.3 5.1 5.9 9.87.5 8.3 9.1 13.010.6 11.4 12.2 16.113.8 14.6 15.4
17090 110 130 150 250190 210 230 330270 290 310 410350 370 390
Inflated Diameter, mm
Inflated Diameter, in
Allo
wab
le D
iffe
ren
tial P
ressu
re, p
si
Allo
wab
le D
iffe
ren
tial P
ressu
re, b
ar
552
483
414
345
276
207
138
69
0
3,000
8,000
7,000
6,000
5,000
4,000
0
2,000
1,000
5.5" Packer Element
7" Packer Element
7.5" Packer Element
8" Packer Element
5.5" Chassis with:
Houston, TX
Americas
Ph: +1 713 389 0018
Perth, AustraliaPh: +61 8 9204 2448
Head Office
Dubai, UAEMiddle East
Ph: +971 50 55 29 273
SingaporeAsia Pacific
Ph: +65 8322 1845
Sofia, BulgariaEurope & Africa
Ph: +359 2 444 23 86
Related Documents
