Top Banner

Click here to load reader

POWDER COATING RESINS - SIR UK/Brochure SIRALES.pdf · PDF filemasterbatch flow agents_____ dry blend resins _____ superdurable coatings _____ crystalline resin_____ hydroxylated

Aug 26, 2018

ReportDownload

Documents

trinhkien

  • POWDER COATING RESINS

  • 2

    INDEX

    ABOUT US _____________________________________________ 3

    HYBRID SYSTEM 50 : 50 _________________________ 5

    HYBRID SYSTEM 60 : 40 _________________________ 6

    HYBRID SYSTEM 70 : 30 _________________________ 7

    CARBOXYLATED POLYESTER RESINS:

    HYBRID:

    PT 910 / TGIC __________________________________ 11

    PROSID 95 : 5 __________________________________ 9

    PROSID 96 : 4 __________________________________ 10

    OUTDOOR SYSTEM:

    EPOXY RESINS __________________________________________ 15

    HARDENERS & ADDITIVES ________________________________ 17

    CONTACT US ____________________________________________ BACK

    POWDER COATING RESINS

    SPECIAL POLYESTERS ___________________________________ 12

    MASTERBATCH FLOW AGENTS______________________

    DRY BLEND RESINS ______________________________

    SUPERDURABLE COATINGS ________________________

    CRYSTALLINE RESIN______________________________

    HYDROXYLATED POLYESTER RESINS_________________

  • With more than 80 years of experience in

    the development and manufacturing of high

    quality materials, SIR INDUSTRIALE Spa

    simply knows how to find the best solution

    for your specific needs.

    SIR INDUSTRIALE Spa aims at finding

    the best solution for the customers

    through cooperation and passion for

    continuous improvements.

    Driving by innovation, we always try to improve our resins for the best results. Our most distinguishing mark is a comprehensive products range for powder coatings:

    SIRALES Saturated Polyester resinsEPOSIR / EPONAC Epoxy resinsPROSID HardenersSIRION Additives and hardeners

    Focusing on our clients satisfaction and accurate order fulfilling, we keep a safe environment and we protect it at all steps.

    The guide gives the key of the mentioned products. The product specifications were correct at the time of printing. However we recommend to contact our offices for any information you may require.

    WHO IS

    SIR?

    3

    ADVANCED SERVICE CENTER:SIR avails itself of a centralized structurefor study, research, design and development activities that are indispensable to guarantee a constant innovation-oriented work.

    MISSION: To create optimum value for all customers, shareholders, employees and social partners applying safe, ethical and environmentally practice.

  • THE COMPANY

    WE ARE READY FOR THE CHALLENGES WHICH THE MARKET PROVIDES

    4

  • HYBRID SYSTEM 50 : 50

    SIRALESCARBOXYLATED POLYESTER RESINS

    PE 8210 50 : 50 68 - 78 15/160 C20/150 C

    Very high reactivity, good flow, mechanical properties

    and overbaking resistance56

    SIRALES RATIOACID VALUE

    (mgKOH/g resin)

    VISCOSITY

    at 200C

    [mPa.s] (1)APPLICATION/PROPERTIESCURING CYCLE (2) TG

    1200 - 4000

    PE 8231 50 : 50 65 - 75 15/200 C20/180 C

    Medium reactivity and excellent flow

    PE 8240 50 : 50 60 - 7015/160 C

    30/150 C

    High reactivity, good flow and gloss

    PE 8212.T 50 : 50 08/200 C15/180 C

    Medium reactivity combined with good flow and

    mechanical properties. It is specifically designed to

    obtain low yellowing matt coatings in combination with

    matting agent Sirion VP 1035.

    58

    56

    6370 - 80

    2800 - 4800

    1800 - 4000

    3000-6000

    High reactivity and good over-baking resistance

    50:50/60:40 60 - 7210/180 C

    15/160 CHigh reactivity, good flow and gloss

    PE 8223* 50:50/60:40 60 - 7012/160 C

    20/150 C

    55

    54

    PE 8222* 1800 - 3800

    2400 - 4400

    PE 8220.T 50:50/60:40 55 - 6612/200 C

    15/180 CVery good flow and gloss, together with high flexibility. 562300 - 4000

    PE 8221* 50:50/60:40 58 - 6810/200 C

    15/180 C 582200 - 4000 Very good flow and brightness and with a high flexibility.

    PE 8205

    07/160 C

    12 /150 C

    20 /140 C

    35 /130 C

    58

    Very high reactive resin for low temperature curing cycles.The main characteristics of the paints based on PE 8205 are high flexibility, good flow, appearance and storage

    stability.

    800 - 300070 - 8250 : 50

    5

    (1) ICI Cone &Plate viscosimeter (2) Object temperature (T) stands for triboo

    *Tribo version available

    55 65 2000 4000PE 8242 50:50/55:45 High reactivity combined with good mechanical and aesthetic properties

    10/180 C15/170 C 58

  • HYBRID SYSTEM 60 : 40

    PE 8224 55 - 66 2300 - 4000 08/180 C15/160 C

    55 - 65 2000 - 4000 10/180 C

    20/160 C

    60 : 40 45 - 55 3000 - 500010/180 C

    15/170 C

    PE 8244 50 - 6010/180 C

    15/170 C

    PE 8241 3000 - 5000High reactivity combined with good mechanical and aesthetic

    properties.

    PE 8253It depends

    from catalyst employed

    Good mechanical properties, high brightness and flow. To

    regulate curing cycles it is necessary to employ appropriate

    catalysts or accelerators, like Sirion VP 1110, or Actiron NXZ

    30 from Synthron when food contact it is required.

    PE 8560 10/190 C15/180 C

    High wetting ability of pigment and filler. It assures good flowand surface appearance with powder coatings with binder :

    pigment ratio of 50 : 50 and 45:55.

    60 : 40

    60 : 40

    60 : 40

    60 : 40

    45 - 55

    45 - 55

    50 - 60

    High reactivity and very good flow combined with good

    mechanical and aesthetic properties.

    High reactivity, good mechanical and aesthetic properties;

    High reactivity, good mechanical and aesthetic properties;

    1800 4000

    1000 3000

    58

    53

    55It is suggested in combination 60/40 p.b.w. with EPOSIR7175 PG or EPONAC 825, to manufacture powder coatings

    with high reactivity combined with good mechanical and aesthetic properties.

    55

    55

    52

    65

    SIRALES RATIOACID VALUE

    (mgKOH/g resin)

    VISCOSITY

    at 200C

    [mPa.s] (1)APPLICATION/PROPERTIESCURING CYCLE (2) TG

    PE 8225

    PE 8243.T

    1800 4000

    6

    (1) ICI Cone &Plate viscosimeter (2) Object temperature - (T) Stands for triboo

    *Tribo version available

    SIRALESCARBOXYLATED POLYESTER RESINS

    PE 8254 60 : 40 50 - 60 1800 4000 08/160 C15/150 C

    In combination with EPOSIR 7168 PG or EPOSIR7175 PG, to manufacture powder coatings with goodmechanical properties and extension.

    55

    10/180 C

    15/170 C

    60 : 40

    60 : 40

  • APPLICATION/PROPERTIES

    HYBRID SYSTEM 70 : 30

    SIRALES RATIOACID VALUE

    (mgKOH/g resin)

    VISCOSITY

    at 200C

    [mPa.s] (1)CURING CYCLE (2) TG

    7

    PE 8412.T 35 - 45 3500 - 6500 10/180 C12/160 C

    High reactivity combined with good flow and mechanical

    properties with good yellowing resistance for overbaking.

    PE 8417 70 : 30 32 - 40 4000 - 7000 06/180 C10/160 C

    PE 8418.T 70 : 30 30 - 38 3000 - 6000 10/180 C15/160 C

    PE 8419* 70 : 30 32 - 40 3500 - 5500

    PE 8420* 32 - 40 3500 - 550015/200 C

    20/180 C

    PE 8421* 3500 - 5500 15/170 C20/160 C

    PE 8422* 70 : 30 4500 - 7000 10/160 C15/150 C

    High reactivity combined with optimum brightness and good

    mechanical properties.

    PE 8425.T 70 : 30 3500 - 5500 15/170 C20/160 C

    High reactivity combined with good flow, good mechanical

    properties and good overbaking resistance.

    PE 8429* 3000 - 600015/170 C

    20/160 C

    High reactivity combined with good flow and good mechanical properties.

    PE 8439.T3000 - 6000

    15/170 C

    20/160 C

    High reactivity combined with good mechanical properties. Is

    specifically designed to prepare texture finish coatings.

    PE 844008/200 C10/180 C Good flow and high mechanical properties.

    70 : 30

    70 : 30

    70 : 30

    32 - 40

    28 - 36

    30 - 38

    30 - 38

    30 - 38

    32 - 40

    Good flow and gloss, good overbaking.

    High reactivity combined with good flow and good mechanical

    properties.

    High reactivity combined with good flow, good mechanical

    properties and with good wet ability of organic pigments.

    High reactivity combined with good mechanical properties and

    flow.

    70 : 30

    5000 9000

    15/170 C

    20/160 C

    High reactivity combined with good flow, good mechanical

    properties.

    70 : 30

    70 : 30

    54

    53

    50

    55

    52

    54

    54

    54

    56

    56

    65

    70 : 30 32 - 40 3500 - 5500 Good yellowing resistance to over-baking. To regulate cure cycles appropriate catalyst or accelerator SIRION VP 1110

    have to be used.

    According to catalystemployed

    55PE 8470

    *Tribo version available

    SIRALESCARBOXYLATED POLYESTER RESINS

    4000 700010/180 C15/160 C70 : 30 30 - 38PE 8423/FT* 53

    Is recommended to be used in coupling with EPOSIR

    7175 PG and EPONAC 825, in the weight ratio of 70/30, in

    order to obtain high reactivity powder coatings with high flow

    without using the common flow agents. Very good brightness

    together with high mechanical properties and very good

    storage stability.

    (1) ICI Cone &Plate viscosimeter (2) Object temperature - (T) Stands for triboo

  • 8

    Curing cycle/RATIO 50 : 50 70 : 30

    150 C

    160 C

    170 C

    180 C

    According to catalyst employed

    PE 8440PE 8420*

    PE 8243.TPE 8241

    PE 8253 PE 8470

    PE 8422*

    PE 8244

    SIRALESCARBOXYLATED POLYESTER RESINS

    PE 8222*

    PE 8221*

    PE 8225

    PE 8224

    PE 8242

    PE 8254

    130 C

Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.