Pneumatic Tools for Professionals: Grinding, Filing and ... · Pneumatic Tools for Professionals: Grinding, Filing and Deburring Tools 5 ... If it is in our line of business, we ...

Pneumatic Tools for Professionals:Grinding, Filing and Deburring Tools

5

Schleifer_K5_2/2006_Englisch 30.03.2006 13:36 Uhr Seite 1

BIAX - Partner of Industry

Companies developing and produ-cing industrial tools need a "feel" forthe market.

BIAX tools are always designed tomeet the demands and wishes of ourpartners.

It is of no surprise that BIAX hasevaluated exciting innovations time andtime again.

You can expect a lot from BIAX

And this is why our research and deve-lopment centre is creating the productsthat will set the standards of tomorrow.

We estimate ourselves more andmore as "service professionals", whocan offer a complete package of servicesand solutions. We can confidently claim

BIAX - Over 75 years of quality.

Schmid & Wezel was one of the pio-neers focussing on pneumatic tools.

Since 75 years the company pre-sents the highest standard of precision,quality and cooperation to the custo-mer.

Over the world, when people talkabout pneumatic tools these days, theone brand they often mention first is BIAX.

This is of course due to the outstan-ding quality of our products and ourendless drive for technical perfection.Both characteristics have been the sour-ce and guarantee of our success, since1919.

BIAX - The brand for professionals

BIAX – Quality.Made in Germany.

2


to be better, more progressive and morecapable than the competition.

BIAX - superior technology and impressive quality

The superior technology of BIAX pro-ducts does not only become obvious inthe many well thought-out details, butalso in the high-quality material usedfor all our products.

Look at the user-friendly design ofour products, design that always incor-porates the newest advances in ergono-mics.

And of course the exceptionalworkmanship and guarantee of long-term use. For us, this is all a matter offact - for you, indispensable!

BIAX-tools are simply the best thatcan be found on the market.

Into the future with BIAX

Much of what your business requires interms of pneumatic and electric toolsand accessories can be found in this pu-blication.

If you happen not to find what youare looking for, simply give us a call.

If it is in our line of business, wewill find a solution.

This is what we can promise alreadytoday!

BIAX pneumatic tools - since onlythe best is good enough for the manufacturing of your quality products!

Can you afford low quality toolswith long downtime and repair time? We can’t - and neither can you!

BIAX Pneumatic Tools. In a Class of their own.

Experts know whythey prefer BIAX-Pneumatic Tools: Quality throughout!

3


4 5

The Lubricant-free High-Speeder:100,000 rpm85,000 rpm

TVD 3-100/2With a speed of 100,000 rpmand a flexible spindle bearingset, you can obtain optimalsurface quality when dressing metallic materials and also keep the noise levelto a minimum. With it’s turbodrive, this machine can beoperated without lubrication(oil-free!). The machine is easyto maintain since there is noneed to change the lamellae.

T 365/2Due to the turbo drive, thismachine can also be operatedwithout lubrication. A coasting brake stops thetool immediately for optimumsecurity. A centrifugal force regulatorensures a constant speedunder variable loads and areduction of air consumption.A flexible spindle bearing setsignificantly improves the sur-face finish and reduces wearon the milling tool.

TSD 385 / TSH 385Due to the lamella motor, thelubricant-free drive of thisgrinder is thoroughly uniqueand patented.Similar to the turbo drive, thismachine is lubricant-free yetstill slim and easy to handle.The life cycle can be comparedto lubricated lamella motors.A double bearing set allowsthe grinder to also be used for extreme applications.

TVD 3-100/2 T 365/2 TSD 385 TSH 385Twist valve Push valve Twist valve Lever valveforwards backwards backwards backwardsflexible flexible double double100,000 65,000 85,000 85,00080 100 100180 180 170 17070 70 74 74250 220 190 2103 3 3 3

3 6 4 45 8 6 6– – – –ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm001 366 537 001 366 594 001 366 576 001 366 576included included included included150 149 906 150 149 730 150 001 710 150 001 700

100,

000

rpm

65,0

00 r

pm

85,0

00 r

pm

TVD 3-100/2

T 365/2

TSD 385TSH 385

Designation:Valve:Exhaust air direction:Front bearing set:Rotational speed [rpm]:Power [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Max. Tool-Ø [mm]:Carbide tools:Profile grinding wheels:Synthetic grinding wheels:Collet:Hose unit:

Product ID:

TVD 3–100/2

T 365/2

TSD 385


5

The Endurance Runner:85,000 rpm

TVD 3/2-

T 365

SRD 3-85/2 / SRH 3-85/2

This perfectly designed machinecan be equipped with a highperformance double bearing setin place of a single bearing andis therefore the ideal tool forextreme loads and prolongeduse. Despite this it remains lightand fits in the hand as if tailor-made. Because of its high rota-tional speed, this grinder leavesa very accurate grinding pattern.

This machine is available in thefollowing versions:

Bearing set:single or double

Valve:Twist or lever valve

Exhaust air duct: backwards or forwards

SRD 3-85/2 SRD 3-85/2D SVD 3-85/2 SVD 3-85/2D SRH 3-85/2 SRH 3-85/2D SVH 3-85/2 SVH 3-85/2DTwist valve Twist valve Twist valve Twist valve Lever valve Lever valve Lever valve Lever valvebackwards backwards forwards forwards backwards backwards forwards forwardssingle double single double single double single double85,000 85,000 85,000 85,000 85,000 85,000 85,000 85,000100 100 100 100 100 100 100 100170 170 170 170 170 170 170 17076 76 78 78 76 76 78 78130 140 180 190 170 170 210 2203 3 3 3 3 3 3 3

4 4 4 4 4 4 4 46 6 6 6 6 6 6 6– – – – – – – –ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm ZG 5/3 mm001 366 595 001 366 595 001 366 539 001 366 539 001 366 595 001 366 595 001 366 539 001 366 539included included – – included included – –150 001 060 150 001 035 upon request 150 001 080 150 001 065 150 001 040 150 001 070 150 001 075

SRD 3-85/2

SRH 3-85/2


Product ID:

BIAX pneumatic tools. Professionals throughout theworld value the excellent features and exemplary quality of our products.

SRD 3-85/2


6 7

BIAX Power Light:55,000 rpm

SRD 3-55/2 StandardThe "feather-light weight"and the proven, low-vibrationSRD 355 motor can guaranteespot-on accuracy and a longservice life. Lightness andergonomic form avoid earlyfatigue and allow the finestdeburring work. The twistvalve insulation offers protec-tion for the hands against thecold.

SRD 3-55/2 S Auto-LockThe unique quick changesystem works with standardtools like the TungstenCarbide burring tools or abra-sive wheels.• No annoying opening and

closing of the collets with tool keys -you save time

• Wear-resistant collets -you save money

• No need to keep or search for tool keys -You increase productivity

SRD 3-55/2 KE KE-SystemThe basis of this machine isthe standard model.In addition, this tool is equip-ped with an adjustableattachment for chamferingedges.Various settings will effect thebevelling strength.

SRD 3-55/2 SRD 3-55/2 S SRD 3-55/2 KETwist valve Twist valve Twist valvebackwards backwards backwardssingle single single55,000 55,000 55,000100 100 100170 170 17074 74 7493 103 953 3 3

6 4 TCA 0303-63 incl.8 8 –– – – –ZG 5/3 mm – ZG 5/3 mm001 366 595 001 366 595 001 366 595included included included150 000 925 150 000 935 150 000 965

Standard

Auto-Lock

KE-System


Product ID:

SRD 3-55/2


7

High-Speed for Professionals: 45,000 rpm

SRD 6-45/2 SLThis BIAX grinder has a specificflexible bearing to preventchatter marks and to producean excellent surface quality.

SRD 6-45/2 SRH 6-45/2This high-performance grin-der is the optimised successormodel of the proven straightgrinder SRD 645. Despite thehigh operating speed of 45,000 rpm, it can reach apower output of 260 W. Wehave improved the relation ofpower to air consumption. The light weight and ergono-mic design guarantees perfecthandling

SRD 3-45/2 SRH 3-45/2Design similar to the SRD 6-45/2, however with alonger and thinner spindle sothat work can also be done atworkpieces with obstructions.

SRD 6-45/2 SRD 6-45 / SL SRH 6-45/2 SRD 3-45/2 SRH 3-45/2Twist valve Twist valve Lever valve Twist valve Twist valvebackwards backwards backwards backwards backwardssingle flexible bearing single single single45.000 45.000 45.000 45.000 45.000260 260 260 260 260380 380 380 380 38076 76 76 76 76310 590 360 310 3606 6 6 3 3

8 8 8 8 810 10 10 10 10– – – – –ZG 4/6 mm ZG 4/6 mm ZG 4/6 mm ZG 5/3 mm ZG 5/3 mm001 366 577 001 366 577 001 366 577 001 366 577 001 366 577150 010 750 150 010 755 150 010 760 150 010 770 auf Anfrage

SRD 3-45/2

Designation:Valve:Exhaust air direction:Front bearing set:Rotational speed [rpm]:Power [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Max. Tool-Ø [mm]:Carbide tools:Profile grinding wheels:Synthetic grinding wheels:Collet:Hose unit:Product ID:

SRD 6-45/2SRD 6-45/2 SL

The light power-machine

SRD 3-45/2

SRD 6-45/2


8 9

The Universal Genius: 30,000 rpm

SRD 8-30/2, SRH 8-30/3, SARD 830, SARH 830Due to its rotational speed andhigh performance, this qualitymachine can be used in a largerange of applications, e.g. col-lets for tools with a 3 - 8 mmshank diameter. A truly convin-cing system - one that stands forpower and endurance whilemeeting the demands for lightness and ease of use. A version with a double bearingset is also available for toughapplications.

SBRD 830, SBRH 830Based on the SRD 8-30/2, thismachine was designed for ex-treme loads:The extended spindle allowstwo-handed use.The double bearing set extendsservice life.

SVKH 630Ease of use and strength aresuperbly combined in thismachine.It is also distinguished by itscompact form, engine powerand the forward exhaust airduct feature.

SRD 8-30/2 SRH 8-30/2 SARD 830 SARH 830 SBRD 830 SBRH 830 SVKH 630 Twist valve Lever valve Twist valve Lever valve Twist valve Lever valve Lever valvebackwards backwards backwards backwards backwards backwards forwardssingle single double double double double single30,000 30,000 30,000 30,000 30,000 30,000 30,000260 260 260 260 260 260 280450 450 400 400 400 400 42076 76 75 75 75 75 78370 410 500 520 720 750 3608 8 8 8 8 8 8

10 10 10 10 10 10 1016 16 16 16 16 16 1632 32 32 32 32 32 32ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm001 366 577 001 366 577 001 366 505 001 366 505 001 366 505 001 366 505 001 366 502150 010 920 150 010 925 150 012 005 150 012 015 150 012 022 150 012 032 150 011 850

SRD 8-30/2

SBRD 830

SVKH 630


SRD 8 – 30/2

SBRD 830

SVKH 630


9

For short or long ways: 20,000 rpm

SRD 8-20/2 SRH 8-20/2 SRD 8-20/2L100 SRH 8-20/2L100 SRD 8-20/2L200 SRH 8-20/2L200Twist valve Lever valve Twist valve Lever valve Twist valve Lever valvebackwards backwards backwards backwards backwards backwardsrigid rigid flexible flexible flexible flexible20,000 20,000 20,000 20,000 20,000 20,000300 300 300 300 300 300500 500 500 500 500 50074 74 74 74 74 74570 620 750 790 940 9808 8 8 8 8 8

12 12 12 12 12 1224 24 24 24 24 2440 40 40 40 40 40ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm001 366 578 001 366 578 001 366 578 001 366 578 001 366 578 001 366 578150 020 700 150 020 800 150 020 710 150 020 810 150 020 720 150 020 820

SRD 8-20/2


These models are available witha conventional lamella motor aswell as with the patented drymotor (upon request).

SRD 8-20/2 SRH 8-20/2, SRD 8-20/2L100 SRH 8-20/2L100 SRD 8-20/2L200 SRH 8-20/2L200The heart of this precisely-for-med, ergonomic straight grinderseries is the compact motor,which offers the same level ofperformance in all three confi-gurations. These machines areavailable in short, medium(L100) and long (L200) models.All units have a noise-reducingexhaust air duct and are alsoavailable with a lever valve safety device.

SRD 8-20/2SRD 8–20/2 L 100

SRD 8–20/2 L 200

SRD 8-20/2L100


10 1

The Robust:20,000 rpm

SARD 820 SARH 820 SBRD 820 SBRH 820 SVH 8-20/2Twist valve Lever valve Twist valve Lever valve Lever valve backwards backwards backwards backwards forwarddouble double double double flexible20.000 20.000 20.000 20.000 20.000300 300 300 300 400500 500 500 500 70073 73 73 73 75770 830 1040 1100 11908 8 8 8 8

12 12 12 12 1224 24 24 24 2440 40 40 40 40ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm ZG 7/6 mm 001 366 505 001 366 505 001 366 505 001 366 505 001 366 918150 021 105 150 021 125 150 021 135 150 021 115 150 022 020

SBRD 820

SVH 8-20/2


SARD 820 SARH 820This high-performance 20,000 rpm straight grinder isbased on the SRD 8-20/2 (see page 9).The spindle uses a doublebearing set to better copewith the higher strain.

SBRD 820 SBRH 820The extended spindle allowstwo-handed use.The double bearing setextends service life, evenunder the harshest condi-tions.

SVH 8-20/2A machine with a particularlypowerful motor and frontairexhaust.The extended spindle allowswork to be done on hard toreach places.The flexible spindle bearingset ensures that the insertedmilling tool is protected.

SARD 820

SARD 820 SVH 8-20/2


11

Heavy Duty Grinders: 18,000 rpm15,000 rpm12,000 rpm

SBRH 818The ideal machine for verytough applications. This isguaranteed not only by theextremely powerful motor.Designed for two-handedoperation and equipped withtwo high-performance bea-ring sets, this grinder will beyour best companion.SRH 10-15/2SRH 10-12/2One design, two speeds:12,000 rpm or15,000 rpm.SRH 10-15/2 – with a flexiblespindle bearing set to protectthe milling tool.SRH 10-12/2 – with a rigidspindle bearing set for brushing.The machines in the SRH product line are all equippedwith a lever valve safety device.

SBRH 818 SRH 10-15/2 SRH 10-12/2Lever valve Lever valve Lever valvebackwards backwards backwardsdouble flexible rigid18.000 15.000 12.000550 650 650750 700 70079 80 791440 970 9608 10 10

15 15 1530 24 2440 40 40ZG 7/6 mm ZG 8/6 mm ZG 8/6 mm001 366 528 001 366 580 001 366 580150 021 210 150 010 955 150 010 950

SBRH 818

SRH 10-15/2SRH 10-12/2


Whether grinding, drilling,deburring or filing...the extensive BIAX programhas the right machine foralmost every application.

SRH 10-12/2SRH 10-15/2


12

WRD 3-85/2, WRH 3-85/2The angle head of this ma-chine is very small. Accuratework in difficult to reach places is now much easier.Another advantage: The driveis located directly in the anglehead. This way a lowerweight can be achieved andless parts are subject to wear.

WRD 6-20/3 Z, WRH 6-20/3 Z, WRD 10-20/3 S, WRH 10-20/3 SThese small but powerfulangle grinders have a flathead and a robust gearmechanism. Thanks to theoptimised gear bearing set,they are perfectly suited forthe transfer of extreme tor-que. Two versions are availa-ble: with grinding wheel orchop spindle.

WRD 3-85/2 WRH 3-85/2 WRD 6-20/3 Z WRH 6-20/3 Z WRD 10-20/3 S WRH 10-20/3 STwist valve Lever valve Twist valve Lever valve Twist valve Lever valvebackwards backwards backwards backwards backwards backwardsdouble double single single single single85,000 85,000 20,000 20,000 20,000 20,000100 100 300 300 300 300170 170 500 500 500 50074 74 78 78 78 78260 230 730 770 880 9203 3 6 6 M10 M10

4 4 12 12 – –6 6 24 24 – –– – 50 50 80 80ZG 5/3 mm ZG 5/3 mm ZG 4/6 mm ZG 4/6 mm – –001 366 595 001 366 595 001 366 578 001 366 578 001 366 578 001 366 578included included150 100 315 150 100 305 150 123 475 150 123 485 150 123 455 150 123 465

Designation:Valve:Exhaust air direction:Front bearing set:Rotational speed [rpm]:Power [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Max. Tool-Ø [mm]:Carbide tools:Profile grinding wheels:Grinding plate:Collet:Hose unit:

Product ID:

1

WRH 3-85/2

WRD 6-20/3 Z

WRH 10-20/3 S

Professional tools must bedurable, robust and reliable.

BIAX pneumatic tools meet these requirements

in every way.

When it runs out of space:85,000 rpm20,000 rpm


13

Angle Grinders:20,000 rpm13,000 rpm

WRD 6-20/2 ZL 90, WRH 6-20/2 ZL 90, WRD 6-20/2 ZL 45, WRH 6-20/2 ZL 45This version of the angle grinderhas a longer neck and a smallangled head and is thereforewell suited for work involvinghigh performance and precisionin areas which are difficult toreach. There are two versionsavailable: Model with 90°-head (ZL 90),Model with 45°-head (ZL 45).

WRH 14-13/2Small and light, but extremelypowerful. This BIAX pneumaticangle grinder has the drive pla-ced directly in the angle headand functions without a break-down-susceptible gear mecha-nism. The consequence: The unitis lighter and avoids parts thatare subject to wear.

WRD 6-20/2 ZL 90 WRH 6-20/2 ZL 90 WRD 6-20/2 ZL 45 WRH 6-20/2 ZL 45 WRH 14-13/2Twist valve Lever valve Twist valve Lever valve Lever valvebackwards backwards backwards backwards backwardssingle single single single single20,000 20,000 20,000 20,000 13,000300 300 300 300 600500 500 500 500 70078 78 78 78 80930 960 940 980 1,7606 6 6 6 M14

10 10 10 10 –16 16 16 16 –50 50 50 50 115ZG 4/6 mm ZG 4/6 mm ZG 4/6 mm ZG 4/6 mm –001 366 578 001 366 578 001 366 578 001 366 578 001 366 580150 123 430 150 123 440 150 123 490 150 123 500 150 912 010

Designation:Valve:Exhaust air direction:Front bearing set:Rotational speed [rpm]:Power [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Max. Tool-Ø [mm]:Carbide tools:Profile grinding wheels:Grinding plate:Collet:Hose unit:Product ID:

WRD 6-20/2 ZL 90

WRH 14-13/2

WRD 6-20/2 ZL 45

20,0

00 r

pm

20,0

00 r

pm

13,0

00 r

pm

WRD 6-20/2 ZL 90 WRD 6-20/2 ZL 45


14

The Belt Grinders ...

HBH 200, HBD 200It is not only the rapid beltchange feature that makesthis belt grinder outstanding.Thanks to a locking screw, it isalso easy to switch from flatgrinding with a telescopic armto face surface grinding witha fixed grinding arm. In addi-tion, the machine can beequipped with grinding armsfor belt widths of 8, 15 or 20mm. Change-outs are donesimply and effortlessly.

HB 12, HBD 12The unique belt guidingsystem allows the use of eventhe smallest belt widthswithout having the belt springfrom the roll.The clamping system ensurescontinuous belt tension andalso keeps the belt guide secure.Available with either lever ortwist valve.

HBH 200 HBD 200 HB 12 HBD 12Lever valve Twist valve Lever valve Twist valvebackwards backwards backwards backwardssingle single single single20,000 20,000 20,000 20,000300 300 300 300500 500 500 50078 78 78 78870 840 1,470 1,42020 20 12 12001 366 578 001 366 578 001 366 505 001 366 505150 123 770 150 123 780 150 123 100 150 123 110Grinding arms are not included in delivery.

Designation:Valve:Exhaust air direction:Front bearing set:Rotational speed [rpm]:Power [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Belt width:Hose unit:Product ID:

HBD 200

HB 12

To remain a market leader,you must stay one step

ahead of the competition...1


… and the Right Accessories

...for example with our unique belt grinder.

15

Rolle Ø 14,0 mm 14,0 mm 14,0 mm Lenght Grit Product-IDWidth 4,5 mm 11,5 mm 15,5 mm x Width

60 001 620 509

Rubber 150 124 875 150 124 880 150 124 885 330 x 8 120 001 620 511180 001 620 512240 001 620 513

60 001 620 508

Steel 150 124 850 150 124 855 150 124 860 330 x 15 120 001 620 516180 001 620 517240 001 620 518

Steel 60 001 620 584150 124 865 150 124 870 330 x 20 120 001 620 586angled 180 upon request240 upon request

Rollertype Roller-Ø Belt- Designation Product ID Lenght Grit Product IDwidth x Width

60 001 620 559

Rubber 16 x 3 6 HB 6163 150123320 610 x 6 120 001 620 561180 001 620 562240 001 620 570

60 001 620 559

Rubber 25 x 9 6 HB 6259 150 123 330 610 x 6 120 001 620 561180 001 620 562240 001 620 570

60 001 620 565

Steel 8 x 9 12 HB 1289 150 123 310 610 x 12 120 001 620 567180 001 620 568240 001 620 571

60 001 620 565

Rubber 16 x 9 12 HB 12169 150 123 300 610 x 12 120 001 620 567180 001 620 568240 001 620 571

60 001 620 565

Rubber 18 x 12 12 HB 121812 150 123 340 610 x 12 120 001 620 567180 001 620 568240 001 620 571

Grinding Arms for HBD/H 200 Grinding Belts

Grinding Armsfor HB 12, HBD 12 Grinding Belts


BE 805

16

Tools for Deburring

BEW 309, BEW 605, BEW 606This angular designed machineallows deburring of bore holes indifficult to reach areas, e.g. slan-ted bore holes that need to bedeburred from the inside. Thescaled illustrations below showthe various head sizes.

BE 309, BE 805The straight drilling deburrer isavailable in two different sizesfor various bore holes.The push-start feature easeshandlingIt is also possible to regulate the rotational speed. To improvehandling, the attached hoop can be used to hang the machine on a spring pulley(Order.No. 001 620 021).

BEW 309 BEW 605 BEW 606 BE 309 BE 805Lever valve Lever valve Lever valve Push-start Push-startbackwards backwards backwards backwards backwards0 - 900 0 - 500 0 - 600 0 - 900 0 - 50020 80 80 20 80150 300 300 150 28071 71 71 71 71240 820 810 180 5203 Skt. 6 6.3 Hex. 3 810 25 15 6 25

8 / 12 15 / 25 15 6 15 / 2520.5 / 21.5 40 / 48 26.5 – –– 6 mm – ZG 5/3 mm ZG 7/8 mm001 366 549 001 366 548 001 366 548 001 366 549 001 366 548included included included included included150 800 725 150 810 930 150 810 925 150 800 710 150 810 901

Designation:Valve:Exhaust air direction:Rotational speed [rpm]: adjustablePower [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Max. Bore hole-Ø [mm]:Countersink Ø [mm]:Head heigh f. countersink Ø [mm]:Collet:Hose unit:

Product ID:

BEW 309

BE 309

BEW 605

1

Countersink area Ø 2-6 mm(HSS) 001 950 293 (incl.)(Carbide) 001 950 299

Countersink area Ø 2.5-10 mm(HSS) 001 950 297

HSS countersink Ø 15 mm for BEW 606Countersink area: 3.5-14 mm

Hexagon shank: 6.3 mm001 950 294

Countersink area Ø 2-5.5 mm(HSS) 001 950 292


Countersink area Ø 5-24 mm(HSS) 001 950 296


Countersink area Ø 5-24 mm(HSS) 001 950 291

For BEW 309

For BEW 605

For BE 309

For BE 805

BEW 605 BEW 309

BE 309 BE 805


BE 805 H BWH 6-25/2 K90 BWH 6-25/2 K45Lever valve Lever valve Lever valvebackwards backwards backwards500 2,500 2,50080 300 300280 500 50071 75 75570 1,220 1,2408 6 6– – –ZG 7/8 mm ZG 4/6 mm ZG 4/6 mm001 366 548 001 366 578 001 366 578included150 810 915 150 222 310 150 222 320

Designation:Valve:Exhaust air direction:Rotational speed [rpm]:Power [Watt]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Countersink-Ø [mm]:Collet:Hose unit:

Product ID:

Tools for Brushing and Drilling

BE 805 HThis unit is a variation of theBE 805 that has a lever valveinstead of a push-start.The control button on theside allows switching betweenclockwise and counterclock-wise rotation.The machine is perfectly sui-ted for brushing bore holes.Changing the direction ofrotation will increase the lifespan of the brush consider-ably.

BWH 6-25/2Drilling or brushing in difficultto reach areas is no longer aproblem when using thisangled drilling machine withlong spindle and small anglehead. You can choose between the90° or 45° versions. The machine is however notonly suited for drilling.Brushes can also be fixed intothe robust angle head, whichhas an optimised gear bearingset. You can therefore use thismachine for cleaning, debur-ring and finishing surfacesmade of metal, plastic andwood.Truly multi-talented.

BE 805 H

BWH 6-25/2 K90

17

To providethe right toolfor every situation,BIAX offers a wealth of unit variations. BWH 6-25/ 2 K 90

BE 805 H


18 1

FR 5-8This pistol filer distinguishes itself with very good hand-ling. It is low in both vibration and noise.The stroke rate and the stroke length are adjustable.The file handle can be turned easily.

FR 3-8 and FR 5-8 NThe design of these two pistolfilers is quite similar. While the stroke rate of the FR 3-8 isset to 3 mm, that of the FR 5-8N is set to 5 mm.

PLF 88This high-performance multi-purpose tool is ideal for filing,deburring, sawing, polishingand cutting. The PLF 88 filer istof extremely high performancein the lower range of strokelength.

FLV 8-12This brand new tool is meantfor use in the same applications as the PLF 88 filer. The distinc-tive feature of this tool is itslow-vibration operation (paten-ted innovation). As a result, thedevice may be used for manyhours with no danger to theuser’s health.

FR 8-12This unit is meant for smallfiling and deburring work.

* Additional accessories for FLV 8-121 flat file (coarse) 001 620 2041 half-round file (coarse) 001 620 2071 flat file (medium) 001 620 2011 round file (medium) 001 620 2101 pointe round file

(medium) 001 620 2111 polishing shoe

35 x 25 mm 001 620 443Abrasive tapes (one of each graintype) Grain: 80, 120, 240, 4004 different saw blades

FR 5-8

FR 8-12

FR 3-8

FLV 8-12

PLF 88

Tools for Filing, Polishing ...

New patented vibration damping

FR 5-8 FR 3-8 FR 5-8 N FR 8-12 PLF 88 FLV 8-12280 300 300

Lever valve Lever valve Lever valve Lever valve Lever valve Lever valvebackwards backwards backwards backwards backwards backwards0-8.000 0-8.000 0-8.000 12.000 0-12.000 12.0001-5 adjustable 3 5 2-8 adjustable 2-8 adjustable 4-9 adjustable230 230 230 250 250 250-30072 72 72 73 71 70800 720 720 640 760 7004 4 4 4 6.0 6.0Straining screw Straining screw Straining screw 4 mm incl. mounted by 4 mm mounted by 4 mm001 366 571 001 366 571 001 366 571 001 974 552 001 974 552 001 974 552included included included included included included150 322 830 150 322 730 150 322 735 150 322 850 150 322 860 150 322 870

Plastic case Plastic case Plastic caseTool holders Tool holders 3, 4 and 6.0 3, 4 and 6.0Holder device Holder device

Designation:Power:Valve:Exhaust air direction:Strokes per minute: adjustableStroke length [mm]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Tool holder:Hose unit:

Product ID:Accessories:


19

FR 10-5/2 FR 5-4 FR 8-2 GMD 3Lever valve Twist valve Lever valve Twist valvebackwards backwards backwards forwards5.500 2,000 – 4,000 2,000 3,000adjustable to 10 1-5 adjustable 8 –280 260 310 8073 74 73 80830 940 1,250 1006 3 6 3 Skt.

Chisel includedStraining screw ZG 5/3 mm ZG 4/6 mm –included 001 366 505 001 366 505 001 366 539150 930 220 150 310 810 150 322 611 150 800 301

Designation:Valve:Exhaust air direction:Stroke per minute:Stroke length [mm]:Air consumption [l/min]:Noise level [db (A)]:Weight [g]:Max. Tool mounting [mm]:Carbide tools:Collet:Hose unit:Product ID:

...and Deburring/Engraving

FR 10-5/2

BE 805 H

FR 5-4

FR 8-2

GMD 3

Whether using the model withadjustable stroke length and

stroke rate or merely the basemodel, the light and easy touse pistol file from BIAX will

not let you down.

FR 10-5The 6mm tool holding fixture,the stable design and thealmost maintenance-freepiston motor makes this filerindispensable as a tool, evenunder extreme stress.

FR 5-4This tool has an extremelypowerful motor.Stroke length and stroke rateare adjustable.This unit is available with atwist valve.

FR 8-2An extremely robust tool.The stroke length is 8 mm; the unit is set to 2,000 strokesper minute.

GMD 3A tool used for engraving andchiselling.The following accessories areincluded in delivery:1 carbide writing utensil,various chisels, a chisel blankand an extension tube.


BIAX FilesStraight Design /Min. order 5 units

90 90 65 90 90 90 90 75 90

6.5 x 2 10 x 3 15 x 3 4 6 6.5 x 2.5 10 x 3 10 x 3 4.3 x 4.3

001 620 202 001 620 203 001 620 204 001620213 – 001 620 207 001 620 205 001 620 209 001 620 212

001 620 201 – – 001 620 210 001 620 211 001 620 206 – 001 620 208 –

Profile: scale 1:2

Length [mm]:

Width x Height [mm]:

Cut coarse Product ID:

Cut medium Product ID:

Shank-Ø 4 mmFor use with the following BIAX pneumatic filers: FR 3-8, FR 5-8, FR 8-12, FLV 8-12, PLF 88

BIAX FilesStraight Design /Min. order 10 units

Filing set (1 unit of every profile)

7 x 2 3.5 x 3.5 4 x 4 6 x 2.5 7.5 x 2 4 –

001 620 879 001 620 880 001 620 881 001 620 882 001 620 883 001 620 884 300 000 700

001 620 885

Profile: scale 1:1


Cut 2 (medium) Product ID:

Cut 1 (coarse) Product ID:

Shank Ø 3,8 mm, Head length 65 mmFor use with the following BIAX pneumatic filers: FR 3-8, FR 5-8, FR 8-12, FLV 8-12, PLF 88

BIAX FilesCurved Design /Min. order 5 units

Profile: scale 1:1


Grain D 100 Product ID:

Shank Ø 3 mm, Head length 25 mmFor use with the following BIAX pneumatic filers: FR 3-8, FR 5-8, FR 5-4, FR 8-12, FLV 8-12, PLF 88

BIAX Diamond-Coated FilesStraight Design /Min. order 5 units

20 2


7 x 2 2.8 x 2.8 4 x 4 6 x 2.5 7.5 x 2 4 –

001 620 837 001 620 838 001 620 839 001 620 840 001 620 841 001 620 842 300 000 500

001 620 849 001 620 850 001 620 851 001 620 852 001 620 853 001 620 854 300 002 000

12 x 6 8 x 8 9 x 9 10 x 5 12 x 6 6 –

001 620 801 001 620 802 001 620 803 001 620 804 001 620 805 001 620 806 300 000 300

001 620 813 001 620 814 001 620 815 001 620 816 001 620 817 001 620 818 300 001 700

Profile: scale 1:1



Cut 3 (fine) Product ID:

Profile: scale 1:2



Cut 3 (fine) Product ID:

Shank Ø 3,8 mm, Head length 60 mmFor use with the following BIAX pneumatic filers: FR 3-8, FR 5-8, FR 8-12, FLV 8-12, PLF 88

Shank Ø 6 mm, Head length 80 mmFor use with the following BIAX pneumatic filers: FR 8-2, FR 10-5, FLV 8-12


5 x 2 4 x 4 3 x 3 6 x 3 Ø 2 Ø 4 –

001 620 861 001 620 862 001 620 863 001 620 864 001 620 865 001 620 866 300 000 600


Saw Blades (min. order 10 units)

Polishing shoe

Abrasive Tape for polishing shoes, self adhesive(min. order 10 units)

21

B

A

L

L = 112 mm

C

L

Z

B = 25 mm

These saw blades• set standards for service life and economic efficiency• deliver maximum cutting performance and durability• are extremely flexible and stress resistantThe teeth are made of high quality HSS steel. The base material is made out of spring steel -selected and then immediately heat-treated - for the highest flexibility, toughness and wearresistance.

Saw Blade Teeth Product Range of applicationsLength [mm] L interval [mm] Z ID

96 0.8 001 974 432 All thin metal sheets,,steel sheet to 1.0 mm

96 1.0 001 974 433 Steel sheet to 3.0 mm,aluminium to 1.5 mmchrome steel sheet to 1.5 mm

96 1.8 001 974 434 Heavy metals, aluminium,non-ferrous to 4 mmwood, chip boards

72 1.4 001 974 435 Special tighter curveradius for sawing

Shoe length Width Total length Ø C Product ID:A [mm] B [mm] L [mm] [mm]

35 25 110 4 001 974 436

20 20 140 4 001 974 437

20 11 140 4 001 974 438

Grain 80 120 240 400

Product ID: 001 974 439 001 974 440 001 974 441 001 974 442

Tool Holder for FR 8-12, PLF 88, FLV 8-12

Gegenhalter für FR 8-12 PLF 88 FLV 8-12

Tool mounting [mm] 3 4 6 6,4Product ID: 001 974 430 001 974 411 001 974 443 001 974 431

Product ID: 001 974 418 001 974 542 001 974 623When the filers are used as saws, the support is needed to sustain the machine against thework piece. The support is progressively adjustable, e.g. in order to limit the insertion depthof the saw blade


001366505 001366516 001366528 001366594 001366595 001366548 001366549 001366577 001366578 001366580 001366586

001367711 001367712 001367712 001367711 001367711 001367711 001367711 001367711 001367711 001367712 001367711

001367616 001313102 001313102 001367616 001367616 001367616 001367616 001367616 001367616 001313102 001367616

001366207 001366202 001366202 001366207 001366216 001366207 001366216 001366207 001366207 001366202 001366207

001372606 001372610 001372610 001369406 001369408 001372606 001369408 001372606 001372606 001372610 001372606

001366357 001366320 001366320 001366357 001366308 001366357 001366308 001366357 001366357 001366320 001366357

003008026 – 001365014 – 003008000 – – 003008023 003008026 001365014 003008026

001331142 001331147 001331142 – 001331185 001331161 001331158 001331177 001331163 001331142 001331175

003003528 003003702 003003702 – 003003447 001366204 – 001366204 001366204 001366211 003003528

001312005 001313103 001313103 – – 001312205 – 001312205 001312205 001313303 001312205

001366356 001366318 001366318 001366356 001366309 001366356 001366309 001366356 001366356 001366318 001366356

001331143 001331143 001331143 – 001331184 001331160 001331157 001331160 001331162 001331143 001331143

3 3 3 3 1.5 1,5 1.5 3 3 3 3

7 10 10 7 4.5 7 4.5 7 7 10 7

0.5 0.5 0.7 0.24 0.11 0.21 0.1 0.4 0.4 0.7 0.24

Complete hose unit:

Plug-in nipple included (8):

Washer included (9):

Hose nozzle (1):

Hose clamp (2):

Pressure hose (3):

Silencer (4):

Exhaust air hose (5):

External thread nozzle (6):

Washer (7):

Bulk Hosing:

Pressure hose:

Exhaust air hose:

Technical data:

Length [m]

Internal diameter [mm]

Weight [kg]

Order No. Order No. Order No. Order No. Order No. Order No.

– – – 001 999 871 – –

– – 001 999 957 001 999 989 001 999 868 –

– – 001 999 960 001 999 988 – –

001 999 932 – 001 999 959 001 999 987 001 999 867 –

– – 001 999 952 001 999 986 – –

001 999 999 001 999 995 001 999 991 001 999 985 001 999 982 –

– – 001 999 951 – 001 999 924 –

001 999 998 001 999 949 001 999 961 – 001 999 973 –

001 999 997 – 001 999 958 – 001 999 972 –

001 999 996 001 999 994 001 999 990 – 001 999 981 001 999 977

– – – – 001 999 971 –

– 001 999 993 – – 001 999 980 001 999 976

– 001 999 992 – – – 001 999 975

– – 001 999 964 001 999 983 001 999 979 –

– – 001 999 965 – 001 999 978 –

– – 001 999 970 001 999 984 – –

ZG 1 ZG 1 A ZG 4 ZG 5 ZG 7 ZG 8

Inner Diameter 0.5 mm













Inner Diameter 1/8 ”



Type

22

Exhaust Air and Air SupplyHose Units

Collets

2Further special versions on request

only for handpieces for pneumatic units and handpieces


For oil-freepneumatic tools

001367022 001367018 001367017 001367045

R 1/4” R 1/4” R 1/4” R 3/8” / 1/ 2”

10 10 10 10

0.55 0.8 0.5 1.9

0.5-8 0.5-10 0.5-10 0.5-8

0.83 0.74 0.67 1.9

Product ID:

Connection thread:

Max. Working pressure [bar]:

Rate of flow at 6 bar [m3/min]:

Range of adjustment [bar]:

Weight [kg]:

R 1/4” R 3/8” R 1/4” i – – R 1/8” R 1/4” – – –

– – – 7 10 4.5 4.5 4.5 7 10

001366706 001366709 001366717 001366707 001366711 001366215 001366216 001369408 001369401 001369403

Connection thread:

For hose widths:

Product ID:

Single-hand Coupling

23

With external thread

Product ID (0,5l)

001365602

Product ID (5,0L)

001365605

With internalthread

With hose connection Hose screw joint Hose clamps

– – – R 1/8” R 1/4” R 1/4” R 3/8”

4.5 7 10 7 7 10 10

001366610 001366603 001366607 001366204 001366207 001366211 001366202

Connection thread:

For hose widths:

Product ID:

Hose Nozzle External Thread Nozzle

R 1/8” R 1/4” R 3/8” R 1/4” i R 3/8” i R 3/8” i R 1/4” i

001367703 001367710 001367706 001367711 001367712 001367211 001367212

Connection thread:

Product ID:

R 1/4” x R 1/4” R 3/8” x R 3/8” R 1/4” x R 1/8” R 3/8” x R 1/4” R 1/2” x R 3/8” R 1/8” R 1/4” R 3/8”

001 367101 001367 102 001370 901 001370 902 001 370 903 001 312205 001367 616 001 313 102

Connection thread:

Product ID:

Nipple with external thread

Nipple with internal thread

Manifold block with couplings

Double Nipple Reducing Nipple Sealing Ring

Special oilOil Supply Units


Prin

ted

in G

erm

any

8/20

05/E

• T

echn

isch

e Ä

nder

unge

n vo

rbeh

alte

n - D

esig

ns a

nd s

peci

fica

tion

s ar

e su

bjec

t to

cha

nge

wit

hout

not

ice

or o

blig

atio

n - L

e co

nstr

ucte

ur s

e ré

serv

e le

dro

it d

e m

odif

ier

les

cara

ctér

isti

ques

éno

ncée

s da

ns c

e ca

talo

gue

sans

pré

avis.

© b

y BI

AX

DruckluftwerkzeugePneumatic ToolsOutils pneumatiques

SchaberScrapersGrattoirs

Hartmetall-WerkzeugeCarbide ToolsOutils en carbure de tungstène

Biegsame WellenFlexible SchaftsMachines à arbre flexible

FleischereimaschinenMeat Processing MachinesMachines pour l’industrie de la viande

Maschinen mit biegsamer WelleMachines with flexible shafts

Das vollständige EFA-Maschinenprogramm für die Schweine- und SauenschlachtungThe full range of EFA-machines for breaking

Meat Processing Power

Schmid & WezelGmbH & Co.Maschinenfabrik

Postfach 60, D-75429 MaulbronnMaybachstr. 2, D-75433 MaulbronnTelefon +49 (0)70 43/102-0Telefax +49 (0)70 43/[email protected]

Schmid & WezelHilsbach GmbH & Co.

Breite Straße 38D-74889 Sinsheim-HilsbachTelefon +49 (0)72 60 /91 33-0Telefax +49 (0)72 60 /91 [email protected]

Schmid & WezelGmbH & Co.Maschinenfabrik

Postfach 60, D-75429 MaulbronnMaybachstr. 2, D-75433 MaulbronnTelefon +49 (0)70 43 /1 02-0Telefax +49 (0 )70 43 /1 [email protected]

CHBIAX Maschinen GmbH

IndustrieplatzCH-8212 Neuhausen/RheinfallTelefon +41 (0)52 /674 79 79Telefax +41 (0)52 /674 65 [email protected]

IBIAX Italia S.r.l.

Via Cavour, 15I-38068 RoveretoTelefon +39 0464 /43 3124Fax +39 0464 /48 [email protected]


Pneumatic Tools for Professionals: Grinding, Filing and ... · Pneumatic Tools for Professionals: Grinding, Filing and Deburring Tools 5 ... If it is in our line of business, we ...

Documents