Top Banner
Pneumatic Product Ordering Guide 0600-FCGS-0108
36

Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Jul 26, 2018

Download

Documents

donguyet
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Pneumatic Product Ordering Guide0600-FCGS-0108

Page 2: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

WARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBEDHEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provideproduct and/or system options for further investigation by users having technical expertise. It is important that you analyzeall aspects of your application including consequences of any failure, and review the information concerning the product orsystem in the current product catalog. Due to the variety of operating conditions and applications for these products orsystems, the user, through its own analysis and testing, is solely responsible for making the final selection of the productsand systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing,are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or itsauthorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of thisdocument entitled “Offer of Sale”.

© Copyright 2008-2000, Parker Hannifin Corporation. All Rights Reserved

!

Pneumatic Product Ordering GuideAir Preparation Units

Page 3: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

1

Page No.

Who to Call at the Pneumatic Division .......................................................................................... 2

Retail PackagingClam Shell Products ............................................................................................................................... 3

Prep-Air® II ProductsCaution Statements ................................................................................................................................. 4Standard Filters ...................................................................................................................................... 5Coalescing Filters ................................................................................................................................... 6Regulators .............................................................................................................................................. 7Filter/Regulators “Piggybacks” ................................................................................................................ 8Lubricators .............................................................................................................................................. 9Kits ................................................................................................................................................10 to 11

Valve ProductsDirectair 2, 1/8" 3-Way Manual / Mechanical Valves ...................................................................12 to 13Directair 2, 1/8" 4-Way Manual / Mechanical Valves ............................................................................ 14Directair 4, 1/4" 3 & 4-Way Manual / Mechanical Valves ...................................................................... 1542 Series, 1/4" & 1/8" 4-Way Manual / Mechanical Valves................................................................... 16HV Series, 1/4, 3/8 & 1/2 4-Way 3-Position Hand Operated Valve ...................................................... 16

Flow Controls & AccessoriesMufflers, Silencers, Reclassifiers, Drip Leg Drains, Relief Valves ........................................................ 17Drains, Lockout Valves .......................................................................................................................... 18Needle, Check, & Quick Exhaust Valves ............................................................................................... 19Flow Control Valves ............................................................................................................................... 20

Policy InformationAuthorization to Return (A.T.R.) Procedure – POL-1 ...................................................................21 to 23Standard Terms & Conditions – POL-4 ........................................................................................24 to 25Box Quantity and Tubing/Hose Length – POL-8 ................................................................................... 26Pricing, Rebate and Agency Policy – POL-12 .............................................................................27 to 28

Alpha-Numeric Pricing ................................................................................................................29 to 32

Offer of Sale ................................................................................................................................................. 33

Table of ContentsPneumatic Product Ordering GuideAir Preparation Units

Page 4: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North America Richland, Michigan

Catalog 0600-FCGS-0108

Introduction

2

Pneumatic Product Ordering Guide Who to Call ...

TOPIC WADSWORTH RICHLAND

CONTACT PHONE # CONTACT PHONE #

Page 5: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

! CAUTION:Polycarbonate bowls, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use in normalindustrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nortemperatures outside of the rated range. As with most plastics, some chemicals can cause damage. Polycarbonate bowls should not beexposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where compressorsare lubricated with fire-resistant fluids such as phosphate ester and di-ester types.

Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls resistthe action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres. Consultthe factory for specific recommendations where these conditions exist.

TO CLEAN POLYCARBONATE BOWLS USE MILD SOAP AND WATER ONLY! DO NOT use cleansing agents such as acetone,benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic.

Metal bowl guards are recommended for all applications.

! CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within theirfull range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a commoncharacteristic of most industrial regulators, and limiting devices may be obtained only by special design.

Prep-Air® IIAir Preparation UnitsPrep-Air® II

3

Page 6: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

‡ For polycarbonate bowl see caution on page 3. † SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.

Prep-Air® IIRetail PackagingModel Numbers

Air Line Filters

Port Size .................................................. 1/4"Flow (SCFM†) ............................................ 24Pressure ........................................ 150 PSIGElement ........................................... 5 Micron

Part Number

14F11BB-RET

W DISCOUNT

05F – Economy (Twist Drain)Polycarbonate Bowl‡ with Metal Guard

06F – Compact (Twist Drain)Polycarbonate Bowl‡ with Metal Guard

14F – Miniature (Twist Drain) Polycarbonate Bowl‡

Port Size .................................................. 3/8"Flow (SCFM†) ............................................ 70Pressure ........................................ 150 PSIGElement ......................................... 40 Micron

Part Number

05F22AA-RET

Port Size .................................................. 1/2"Flow (SCFM†) ............................................ 85Pressure ........................................ 150 PSIGElement ......................................... 40 Micron

Part Number

06F32AC-RET

Air Line Lubricators

15L – Economy (Micro-Mist)Polycarbonate Bowl‡ with Metal Guard, No Drain

06L – Compact (Mist)Polycarbonate Bowl‡ with Metal Guard, No Drain

04L – Miniature (Mist) Polycarbonate Bowl‡ without Drain

Port Size .................................................. 3/8"Flow (SCFM†) ............................................ 40Pressure ........................................ 150 PSIG

Part Number

15L22NA-RET

Port Size .................................................. 1/2"Flow (SCFM†) ............................................ 90Pressure ........................................ 150 PSIG

Part Number

06L32BE-RET

Port Size .................................................. 1/4"Flow (SCFM†) ............................................ 13Pressure ........................................ 150 PSIG

Part Number

04L10GB-RET

Air Line Filter / Regulator “Piggybacks”

05E – Economy (Twist Drain)Polycarbonate Bowl‡ with Metal Guard

14E – Miniature (Twist Drain)Polycarbonate Bowl‡ with Gauge

Port Size .................................................. 3/8"Flow (SCFM†) ............................................ 40Pressure ........................................ 150 PSIGElement ......................................... 40 Micron

Part Number

05E22A13AB-RET

Air Line Regulators

15R – Economy, with 160 PSIG Gauge

05R – Economy, without Gauge

14R – Miniature, with 160 PSIG Gauge

Port Size .................................................. 3/8"Flow (SCFM†) ............................................ 28Pressure ..................................... 2-125 PSIG

Part Number

15R218FB-RET

Port Size .................................................. 3/8"Flow (SCFM†) ............................................ 40Pressure ..................................... 2-125 PSIG

Part Number

05R213AD-RET

Port Size .................................................. 1/4"Flow (SCFM†) ............................................ 15Pressure ..................................... 2-125 PSIG

Part Number

14R118FC-RET

Port Size .................................................. 1/4"Flow (SCFM†) ............................................ 18Pressure ........................................ 150 PSIGElement ........................................... 5 Micron

Part Number

14E11B18FC-RET

06R – Compact, without Gauge

Port Size .................................................. 1/2"Flow (SCFM†) ............................................ 75Pressure ..................................... 2-125 PSIG

Part Number

06R313AC-RET

4

Page 7: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

AutomaticDrain

TwistDrain

Prep-Air® IIAir Line Filters

W DISCOUNT

Air Line Filters – Are designed to remove airborne solid contaminants, pipe scale, rust, pipe dope, etc.,which may plug small orifices or cause excessive wear and premature failure of pneumatic components.

Filters provide excellent water removal efficiency, unique deflector plate that creates swirling of air stream ensuringmaximum water and dirt separation. They can easily be disassembled for servicing without the use of tools.

5

‡ For polycarbonate bowl see caution on page 3. † SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.

Part NumbersPort Size Flow (SCFM†) Pressure Rating Element Twist Drain Auto Drain

Polycarbonate Bowl‡

1/8" 22 150 PSIG 5 Micron 14F01BB 14F05BB1/4" 24 150 PSIG 5 Micron 14F11BB 14F15BB

Metal Bowl without Sight Gauge1/8" 22 250 PSIG 5 Micron 14F03BB 14F07BB1/4" 24 250 PSIG 5 Micron 14F13BB 14F17BB

Polycarbonate Bowl‡ with Metal Guard1/4" 54 150 PSIG 40 Micron 05F12AA 05F1PAA3/8" 70 150 PSIG 40 Micron 05F22AA 05F2PAA

Metal Bowl with Sight Gauge1/4" 54 250 PSIG 40 Micron 05F14AA 05F1TAA3/8" 70 250 PSIG 40 Micron 05F24AA 05F2TAA

Polycarbonate Bowl‡ with Metal Guard1/4" 53 150 PSIG 40 Micron 06F12AC 06F16AC3/8" 80 150 PSIG 40 Micron 06F22AC 06F26AC1/2" 85 150 PSIG 40 Micron 06F32AC 06F36AC

Metal Bowl with Sight Gauge1/4" 53 250 PSIG 40 Micron 06F14AC 06F18AC3/8" 80 250 PSIG 40 Micron 06F24AC 06F28AC1/2" 85 250 PSIG 40 Micron 06F34AC 06F38AC

Polycarbonate Bowl‡ with Metal Guard3/8" 100 150 PSIG 40 Micron 07F22AC 07F26AC1/2" 130 150 PSIG 40 Micron 07F32AC 07F36AC3/4" 145 150 PSIG 40 Micron 07F42AC 07F46AC

Metal Bowl with Sight Gauge3/8" 100 250 PSIG 40 Micron 07F24AC 07F28AC1/2" 130 250 PSIG 40 Micron 07F34AC 07F38AC3/4" 145 250 PSIG 40 Micron 07F44AC 07F48AC

14F – Miniature

05F – Economy

06F – Compact

07F – Standard

P3NF – Hi-Flow

Metal Bowl

2" 1000 150 PSIG 5 Micron 09F83BB 09F87BB

09F – Hi-Flow

Model Numbers

F602 – Hi-Flow Metal Bowl with Sight Gauge3/4" 270 250 PSIG 40 Micron F602-06WJ F602-06WJR1" 300 250 PSIG 40 Micron F602-08WJ F602-08WJR

1-1/4" 390 250 PSIG 40 Micron F602-10WJ F602-10WJR1-1/2" 450 250 PSIG 40 Micron F602-12WJ F602-12WJR

2" 1200 250 PSIG 40 Micron F602-16WJ F602-16WJR2-1/2" 1200 250 PSIG 40 Micron F602-20WJ F602-20WJR

Metal Bowl with Sight Gauge3/4" 270 250 PSIG 40 Micron P3NFA96GSM P3NFA96GSA1" 300 250 PSIG 40 Micron P3NFA98GSM P3NFA98GSA

1-1/2" # 310 250 PSIG 40 Micron P3NFA9PGSM P3NFA9PGSA# 1" Port Body with 1-1/2" Port Block.

Page 8: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Prep-Air® IICoalescing Filters (Oil Removal)Model Numbers

W DISCOUNT

Coalescing Filters – Are designed toremove 99.9% + of the liquid aerosols, both waterand oil, and submicron particulate matter fromyour pneumatic system. These filters will provideoil free air for applications such as spray painting,

air gauging, pneumatic instrumentation, printing and packaging.

6

‡ For polycarbonate bowl see caution on page 3. † SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.

Polycarbonate Bowl‡ with Metal Guard1/4" 30 150 PSIG Grade 6 15F12EA 15F1PEA3/8" 30 150 PSIG Grade 6 15F22EA 15F2PEA

Metal Bowl with Sight Gauge1/4" 30 250 PSIG Grade 6 15F14EA 15F1TEA3/8" 30 250 PSIG Grade 6 15F24EA 15F2TEA

Polycarbonate Bowl‡ with Metal Guard1/4" 45 150 PSIG Grade 6 11F12EC 11F16EC3/8" 48 150 PSIG Grade 6 11F22EC 11F26EC1/2" 65 150 PSIG Grade 6 11F32EC 11F36EC

Metal Bowl with Sight Gauge1/4" 45 250 PSIG Grade 6 11F14EC 11F18EC3/8" 48 250 PSIG Grade 6 11F24EC 11F28EC1/2" 65 250 PSIG Grade 6 11F34EC 11F38EC

Polycarbonate Bowl‡ with Metal Guard3/8" 73 150 PSIG Grade 6 12F22EC 12F26EC1/2" 75 150 PSIG Grade 6 12F32EC 12F36EC3/4" 80 150 PSIG Grade 6 12F42EC 12F46EC

Metal Bowl with Sight Gauge3/8" 73 250 PSIG Grade 6 12F24EC 12F28EC1/2" 75 250 PSIG Grade 6 12F34EC 12F38EC3/4" 80 250 PSIG Grade 6 12F44EC 12F48EC

10F – Miniature

15F – Economy

11F – Compact

12F – Standard

P3NFHi-Flow

Metal Bowl without Sight Gauge1-1/2" 350 250 PSIG Grade 6 30F73ECP ——

2" 450 250 PSIG Grade 6 31F83ECP ——2" 625 250 PSIG Grade 6 31F8LECP ——

2-1/2" 800 250 PSIG Grade 6 32F9LECP ——3" 1000 250 PSIG Grade 6 32FNLECP ——

30F, 31F, 32FMain Line

I.D. PressureHose Rating Element Part Number

1/4" 100 PSIG Grade 6 02FA06A1/4" 100 PSIG Grade 10 02FA10A1/4" 100 PSIG Grade 6 02FA22A

(oil activated dye)02FMiniature

F701Hi-Flow

Metal Bowl with Sight Gauge3/4" 158 250 PSIG Grade 6 F701-06E3P F701-06E3PT1" 285 250 PSIG Grade 6 F701-08E3P F701-08E3PT

Part NumbersPort Size Flow (SCFM†) Pressure Rating Element Twist Drain Auto Drain

Polycarbonate Bowl‡

1/8" 17 150 PSIG Grade 6 10F01ED 10F05ED1/4" 20 150 PSIG Grade 6 10F11ED 10F15ED

Metal Bowl without Sight Gauge1/8" 17 250 PSIG Grade 6 10F03ED 10F07ED1/4" 20 250 PSIG Grade 6 10F13ED 10F17ED

Metal Bowl with Sight Gauge3/4" 130 250 PSIG Grade 6 P3NFA96DSM P3NFA96DSA1" 140 250 PSIG Grade 6 P3NFA98DSM P3NFA98DSA

1-1/2" # 150 250 PSIG Grade 6 P3NFA9PDSM P3NFA9PDSA# 1" Port Body with 1-1/2" Port Block.

Page 9: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Prep-Air® IIAir Line RegulatorsModel Numbers

W DISCOUNT

Air Line Regulators – Are designed toprovide quick response and accurate pressureregulation for the most demanding industrialapplications.

7

† SCFM = Standard cubic feet per minute at 100 PSIG inlet, 90 PSIG no flow secondary setting and 10 PSIG pressure drop.

Part NumbersPort Size Flow (SCFM†) Pressure Range Without Gauge With 160 PSIG Gauge

1/8" 13 2-125 PSIG 14R013FC 14R018FC

1/4" 15 2-125 PSIG 14R113FC 14R118FC

1/4" 30 2-125 PSIG 05R113AD 05R118AD

3/8" 40 2-125 PSIG 05R213AD 05R218AD

3/8" 70 2-125 PSIG 07R213AC 07R218AC

1/2" 90 2-125 PSIG 07R313AC 07R318AC

3/4" 90 2-125 PSIG 07R413AC 07R418AC

14R – Miniature

05R – Economy

07R – Standard

P3NR – Hi-Flow

1/4" 53 2-125 PSIG 06R113AC 06R118AC

3/8" 60 2-125 PSIG 06R213AC 06R218AC

1/2" 75 2-125 PSIG 06R313AC 06R318AC

06R – Compact

2" 1000 2-125 PSIG 09R813BA ——09R – Hi-Flow

! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.

Do not exceed maximum primary pressure rating.

R119 – Hi-Flow 3/4" 300 2-125 PSIG R119-06C R119-06CG

1" 400 2-125 PSIG R119-08C R119-08CG

1-1/4" 500 2-125 PSIG R119-10C R119-10CG

1-1/2" 500 2-125 PSIG R119-12C R119-12CG

3/4" 200 2-125 PSIG P3NRA96BNN P3NRA96BNG

1" 300 2-125 PSIG P3NRA98BNN P3NRA98BNG

1-1/2" # 300 2-125 PSIG P3NRA9PBNN P3NRA9PBNG# 1" Port Body with 1-1/2" Port Block.

Page 10: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Prep-Air® IIFilter / Regulator “Piggybacks”Model Numbers

W DISCOUNT

Filter / Regulator “Piggybacks” –Are an excellent choice where accurate pressureregulation and high moisture removal efficiency arerequired in a space saving package.

8

‡ For polycarbonate bowl see caution on page 3. † SCFM = Standard cubic feet per minute at 100 PSIG inlet, 90 PSIG no flow secondary setting and 10 PSIG pressure drop. § SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop, with 40 micron element.

Part NumbersPort Size Flow (SCFM†) Pressure Rating Element Twist Drain Auto Drain

Polycarbonate Bowl‡

1/8" 16 150 PSIG 5 Micron 14E01B13FC 14E05B13FC

1/4" 18 150 PSIG 5 Micron 14E11B13FC 14E15B13FC

Metal Bowl without Sight Gauge

1/8" 16 250 PSIG 5 Micron 14E03B13FC 14E07B13FC

1/4" 18 250 PSIG 5 Micron 14E13B13FC 14E17B13FC

Polycarbonate Bowl‡ with Metal Guard

1/4" 30 150 PSIG 40 Micron 05E12A13AB 05E1PA13AB

3/8" 40 150 PSIG 40 Micron 05E22A13AB 05E2PA13AB

Metal Bowl with Sight Gauge

1/4" 30 250 PSIG 40 Micron 05E14A13AB 05E1TA13AB

3/8" 40 250 PSIG 40 Micron 05E24A13AB 05E2TA13AB

Polycarbonate Bowl‡ with Metal Guard

1/4" 46 150 PSIG 40 Micron 06E12A13AC 06E16A13AC

3/8" 55 150 PSIG 40 Micron 06E22A13AC 06E26A13AC

1/2" 61 150 PSIG 40 Micron 06E32A13AC 06E36A13AC

Metal Bowl with Sight Gauge

1/4" 46 250 PSIG 40 Micron 06E14A13AC 06E18A13AC

3/8" 55 250 PSIG 40 Micron 06E24A13AC 06E28A13AC

1/2" 61 250 PSIG 40 Micron 06E34A13AC 06E38A13AC

Polycarbonate Bowl‡ with Metal Guard

3/8" 70 150 PSIG 40 Micron 07E22A13AC 07E26A13AC

1/2" 90 150 PSIG 40 Micron 07E32A13AC 07E36A13AC

3/4" 90 150 PSIG 40 Micron 07E42A13AC 07E46A13AC

Metal Bowl with Sight Gauge

3/8" 70 250 PSIG 40 Micron 07E24A13AC 07E28A13AC

1/2" 90 250 PSIG 40 Micron 07E34A13AC 07E38A13AC

3/4" 90 250 PSIG 40 Micron 07E44A13AC 07E48A13AC

14E – Miniature

05E – Economy

06E – Compact

07E – Standard

P3NE – Hi-Flow Metal Bowl with Sight Gauge

3/4" 250 § 250 PSIG 40 Micron P3NEA96GSMBNN P3NEA96GSABNN

1" 250 § 250 PSIG 40 Micron P3NEA98GSMBNN P3NEA98GSABNN

1-1/2" # 250 § 250 PSIG 40 Micron P3NEA9PGSMBNN ——# 1" Port Body with 1-1/2" Port Block.

! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.

Do not exceed maximum primary pressure rating.

Page 11: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Prep-Air® IIMicro-Mist & Mist LubricatorsModel Numbers

W DISCOUNT

Lubricators –“Micro-Mist” are designed to provide optimum and uniform lubricationwith fine micro-mist particles of 2 micron or smaller, to pneumaticcomponents even through complex piping arrangements.

“Mist” are designed to provide lubrication for most general applications in apneumatic system. Units should be installed close to the application ensuringeffective distribution of oil to pneumatic components.

9

‡ For polycarbonate bowl see caution on page 3. † SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.

Polycarbonate Bowl‡ with Metal Guard, No Drain1/4" 40 150 PSIG 16L12BE 06L12BE3/8" 60 150 PSIG 16L22BE 06L22BE1/2" 90 150 PSIG 16L32BE 06L32BE

Metal Bowl with Sight Gauge, Twist Drain1/4" 40 250 PSIG 16L14BE 06L14BE3/8" 60 250 PSIG 16L24BE 06L24BE1/2" 90 250 PSIG 16L34BE 06L34BE

Polycarbonate Bowl‡ with Metal Guard, No Drain3/8" 60 150 PSIG 17L22BE 07L22BE1/2" 90 150 PSIG 17L32BE 07L32BE3/4" 90 150 PSIG 17L42BE 07L42BE

Metal Bowl with Sight Gauge, Twist Drain3/8" 60 250 PSIG 17L24BE 07L24BE1/2" 90 250 PSIG 17L34BE 07L34BE3/4" 90 250 PSIG 17L44BE 07L44BE

04LMiniature

15LEconomy

16L/06LCompact

17L/07LStandard

P3NLHi-Flow

09LHi-Flow

Metal Bowl with Sight Gauge, Manual Drain2" # 1000 200 PSIG —— 09L84BA

# 1 Quart Bowl.

Part NumbersPort Size Flow (SCFM†) Pressure Range Micro-Mist Mist

Polycarbonate Bowl‡ without Drain1/4" 13 150 PSIG —— 04L10GB

Metal Bowl with Twist Drain1/4" 13 250 PSIG —— 04L13GB

Port Flow PressureSize (SCFM†) Rating Part Number

1/4" 32 250 02L1B

3/8" 32 250 02L2B02LMiniature

Air Tool Oilers

L606Hi-Flow

Metal Bowl with Sight Gauge, No Drain3/4" 325 250 PSIG —— L606-06W1" 350 250 PSIG —— L606-08W

1-1/4" 325 250 PSIG —— L606-10W1-1/2" 400 250 PSIG —— L606-12W

Metal Bowl with Sight Gauge, No Drain3/4" 100 250 PSIG —— P3NLA96LSN1" 130 250 PSIG —— P3NLA98LSN

1-1/2" # 145 250 PSIG —— P3NLA9PLSN# 1" Port Body with 1-1/2" Port Block.

Polycarbonate Bowl‡ with Metal Guard, No Drain1/4" 40 150 PSIG 15L12NA ——3/8" 40 150 PSIG 15L22NA ——

Metal Bowl with Sight Gauge. Twist Drain1/4" 40 250 PSIG 15L14NA ——3/8" 40 250 PSIG 15L24NA ——

Page 12: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Prep-Air® IIKits & AccessoriesKit Numbers

10

Filters / Piggybacks14F / 14E 05F / 05E 06F / 06E 07F / 07E P3NF / P3NE F602

Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers

Elements5μ PS403P PS902P PS702P PS802P P3NKA00ESE EK602VB40μ PS401P PS901P PS701P PS801P P3NKA00ESG EK602BAdsorber PS452P PS931P PS731P PS831P P3NKA00ESA ——

Auto Drain Kit—— —— PS506P PS506P PS506P SA602MD

Mounting BracketPS417BP PS943P PS743P PS843P P3NKA00MW ——

Coalescers10F 15F 11F 12F P3NF 30F 31F F701Part Part Part Part Part Part Part Part

Numbers Numbers Numbers Numbers Numbers Numbers Numbers Numbers

ElementsGrade 6 PS446P PS924P PS724P PS824P P3NKA00ESC 9920-011x1P 9920-012x1P F701-C3-0773Grade 10 PS456P PS930P PS730P PS830P P3NKA00ES9 9920-015x1P —— F701-C3-0774

Auto Drain Kit—— —— PS506P PS506P PS506P PS506P PS506P SA702MB

Mounting BracketPS417BP PS943P PS743P PS843P P3NKA00MW —— —— ——

Regulators / Piggybacks14R / 14E 05R / 05E 06R / 06E 07R / 07E P3NR / P3NE R119 09R

Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers

Gauge (160 PSI)K4515N18160 K4515N18160 K4520N14160 K4520N14160 K4520N14160 K4520N14160 K4520N14160

Mounting BracketPS417BP PS963P PS707P PS807P P3NKA00MW 18B57 PS605P

Panel Mount NutP01531 PS964P P04079B P04079B —— —— ——

Lubricators02L 04L 15L 06L / 16L 07L / 17L P3NL L606

Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers Part Numbers

Mounting Bracket—— PS419 PS943P PS743P PS843P P3NKA00MW SA200AW57 (3/4")

SA200CW57 (1")

Recommended Oil: Parker F4424 Gallon Case F44200512 Quart Case F442003

405

Elements Auto Drain Pressure Gauge(160 PSI)

Parker F442 OilMounting Bracket

Page 13: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

Port Block

Mounting Bracket

Body Connector

Manifold BlockLockout Valve

Prep-Air® IIKits & AccessoriesKit Numbers

11

Modular Accessories05 Series 06 / 16 Series 07 / 17 Series P3N Series

Part Numbers Part Numbers Part Numbers Part NumbersPort Block Connectors - Each kit includes two port blocks

1/8 NPT PS95000P —— —— ——1/4 NPT PS95001P PS750P PS850P ——3/8 NPT PS95002P PS751P PS851P ——1/2 NPT —— PS752P PS852P ——3/4 NPT —— —— PS853P P3NKB96CP1 NPT —— —— —— P3NKB98CP1-1/2 NPT —— —— —— P3NKB9BCP

1/8 BSPP PS95010P —— —— ——1/4 BSPP PS95011P PS765P PS865P ——3/8 BSPP PS95012P PS766P PS866P ——1/2 BSPP —— PS767P PS867P ——3/4 BSPP —— —— PS860P P3NKB16CP1 BSPP —— —— —— P3NKB18CP1-1/2 BSPP —— —— —— P3NKB1BCP

Body Connectors - Each kit includes one set

PS954P PS754P PS854P ——

Modular Manifold Blocks - Body connectors must be ordered separately

1/4" PS95701P —— —— ——3/8" —— PS757P —— ——1/2" —— —— PS857P ——

Wall Mounting Kits - Includes one assembly

PS955P PS755P PS755P P3NKA00MW

Lockout Valves - Order body connectors separately

PS95601P PS756P PS856P ——

Lockout Valve(05 Series)

06 & 07 Series

New FRL Countertop Display

Trade Show / Countertop Display

• Order Part Number: 16B22A18A2BCJ and FRLSTAND

• Display Free with Purchase of Above 06 Series 3-pieceCombination

Page 14: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Air Control Valves – Poppet Valve, 1/8" Port3-Way Manual / Mechanical ValvesModel Numbers

Directair 2 Series, Poppet Valve, 1/8" Ports, .17 Cv, 150 PSIG Max, 32°F to 175°F (0°C to 80°C)

12

B DISCOUNT

2

31

#10OperatorEnd

#12Operator

End

#10OperatorEnd

#12Operator

End

2

31

2

31

#10OperatorEnd

#12Operator

End

Plunger Operated

Model Number Type Port Cv

40411 1000 Spring Return 1/8" .17

Roller Operated

Model Number Type Port Cv

40421 1000 Spring Return 1/8" .17

Tripper Operated

Model Number Type Port Cv

40431 1000 Spring Return 1/8" .17

Toggle Operated

Model Number Type Port Cv

40481 1000 Spring Return 1/8" .17

Button Operated

Model Number Type Port Cv

40441 1000 Spring Return 1/8" .17

Hand Lever Operated

Model Number Type Port Cv

40471 1000 Spring Return 1/8" .17

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

2

31

#10OperatorEnd

#12Operator

End

Page 15: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

Plunger Operated

Model Number Type Port Cv

41411 1000 Spring Return 1/8" .20

41412 1000 Spring Return, Foot Mounted 1/8" .20

41415 1000 Pilot Return 1/8" .20

Roller Operated

Model Number Type Port Cv

41421 1000 Spring Return 1/8" .20

41422 1000 Spring Return, Foot Mounted 1/8" .20

41425 1000 Pilot Return 1/8" .20

One-Way Tripper Operated

Model Number Type Port Cv

41431 1000 Spring Return 1/8" .20

41432 1000 Spring Return, Foot Mounted 1/8" .20

41435 1000 Pilot Return 1/8" .20

Hand Lever Operated

Model Number Type Port Cv

41471 1000 Spring Return 1/8" .20

41472 1000 Spring Return, Foot Mounted 1/8" .20

41475 1000 Pilot Return 1/8" .20

Button Operated – Spring

Model Number Type Port Cv

41441 1000 Spring Return 1/8" .20

41442 1000 Spring Return, Foot Mounted 1/8" .20

41445 1000 Pilot Return 1/8" .20

Button Operated – Manual

Model Number Type Port Cv

41493 1000 Manual Return 1/8" .20

41494 1000 Manual Return, Foot Mounted 1/8" .20

41495 1000 Manual or Pilot Return 1/8" .20

Air Control Valves – Spool Valve, 1/8" Port3-Way Manual / Mechanical ValvesModel Numbers

Directair 2 Series, Spool Valve, 1/8" Ports, .20 Cv, 150 PSIG Max, 32°F to 175°F (0°C to 80°C)

13

B DISCOUNT

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

#10OperatorEnd

#12Operator

End

2

31

Toggle Operated – Detented

Model Number Type Port Cv

41481 1000 Spring Return 1/8" .20

41482 1000 Spring Return, Foot Mounted 1/8" .20

Page 16: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

Plunger Operated

Model Number Type Port Cv

41011 1000 Spring Return 1/8" .20

41012 1000 Spring Return, Foot Mounted 1/8" .20

41015 1000 Pilot Return 1/8" .20

Roller Operated

Model Number Type Port Cv

41021 1000 Spring Return 1/8" .20

41022 1000 Spring Return, Foot Mounted 1/8" .20

41025 1000 Pilot Return 1/8" .20

One-Way Tripper Operated

Model Number Type Port Cv

41031 1000 Spring Return 1/8" .20

41032 1000 Spring Return, Foot Mounted 1/8" .20

41035 1000 Pilot Return 1/8" .20

Hand Lever Operated

Model Number Type Port Cv

41071 1000 Spring Return 1/8" .20

41072 1000 Spring Return, Foot Mounted 1/8" .20

41075 1000 Pilot Return 1/8" .20

Button Operated – Spring

Model Number Type Port Cv

41041 1000 Spring Return 1/8" .20

41042 1000 Spring Return, Foot Mounted 1/8" .20

41045 1000 Pilot Return 1/8" .20

Button Operated – Manual

Model Number Type Port Cv

41093 1000 Manual Return 1/8" .20

41094 1000 Manual Return, Foot Mounted 1/8" .20

41095 1000 Manual or Pilot Return 1/8" .20

Toggle Operated – Detented

Model Number Type Port Cv

41081 1000 Spring Return 1/8" .20

41082 1000 Spring Return, Foot Mounted 1/8" .20

Model Numbers

14

Air Control Valves – Spool Valve, 1/8" Port4-Way Manual / Mechanical Valves

Directair 2 Series, Spool Valve, 1/8" Ports, .20 Cv, 150 PSIG Max, 32°F to 175°F (0°C to 80°C)

B DISCOUNT

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

Page 17: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

4 2

351

#12OperatorEnd

#14Operator

End

4 2

351

#12OperatorEnd

#14Operator

End

4 2

351

#12OperatorEnd

#14Operator

End

#14Operator

End

4 2

351

#12OperatorEnd

#14Operator

End

4 2

351

#12OperatorEnd

#14Operator

End

4 2

351

#12OperatorEnd

Air Control Valves – Spool Valve, 1/4" Ports3 & 4-Way Manual / Mechanical ValvesModel Numbers

15

Directair 4 Series, Spool Valve, 1/4" Ports, .83 Cv, 150 PSIG Max, 32°F to 175°F (0°C to 80°C)

B DISCOUNT

#10OperatorEnd

#12Operator

End

2

31

#12OperatorEnd

#14Operator

End

4 2

351

#12OperatorEnd

#14Operator

End

4 2

351

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

#10OperatorEnd

#12Operator

End

2

31

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

#12OperatorEnd

#14Operator

End

4 2

351

4 2

351

#12OperatorEnd

#14Operator

End

4 2

351

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

2

31

#10OperatorEnd

#12Operator

End

TYPE 1

TYPE 2

TYPE 9

Lever Operated – 3-Way

Model Number Type Port Cv

52481 1000 Spring Return 1/4" .8352483 1000 Manual Return 1/4" .83

52383 10003-Pos Detented,All Ports Blocked 1/4" .83

Foot Operated – 3-Way, Pedal & Treadle

Model Number Type Port Cv

52471 1000 Spring Return 1/4" .83

52475 1000 Pilot Return 1/4" .8352493 1000 Treadle Operated 1/4" .83

Roller Operated – 3-Way

Model Number Type Port Cv

52421 1000 Delrin Roller, Spring Return 1/4" .8352425 1000 Delrin Roller, Pilot Return 1/4" .83

524A1 1000 Steel Roller, Spring Return 1/4" .83524A5 1000 Steel Roller, Pilot Return 1/4" .83

Button Operated – 3-Way

Model Number Type Port Cv

52441 1000 Spring Return 1/4" .8352443 1000 Manual Return 1/4" .8352445 1000 Pilot Return 1/4" .83

Foot Operated – 4-Way, Pedal & Treadle

Model Number Type Port Cv

52071 1000 Spring Return 1/4" .8352075 1000 Pilot Return 1/4" .8352093 1000 Treadle Operated 1/4" .83

Roller Operated – 4-Way

Model Number Type Port Cv

52021 1000 Delrin Roller, Spring Return 1/4" .8352025 1000 Delrin Roller, Pilot Return 1/4" .83520A1 1000 Steel Roller, Spring Return 1/4" .83520A5 1000 Steel Roller, Pilot Return 1/4" .83

Button Operated – 4-Way

Model Number Type Port Cv

52041 1000 Spring Return 1/4" .8352043 1000 Manual Return 1/4" .8352045 1000 Pilot Return 1/4" .83

Lever Operated – 4-Way

Model Number Type Port Cv

52081 1000 2-Pos Spring Return 1/4" .8352083 1000 2-Pos Manual Return 1/4" .8352181 1000 Spring Centered 3-Pos Type 1

1/4" .8352183 1000 Detented APB

52281 1000 Spring Centered 3-Pos Type 21/4" .83

52283 1000 Detented PC

52981 1000 Spring Centered 3-Pos Type 91/4" .83

52983 1000 Detented CE

Page 18: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

4 2

5

#12OperatorEnd

3

#14Operator

End1

APB

4 2

5

#12OperatorEnd

3

#14Operator

End1

CE

4 2

5

#12OperatorEnd

3

#14Operator

End

1

Spring Return

4 2

5

#12OperatorEnd

3

#14Operator

End

1

Detented

4 2

5

#12OperatorEnd

3

#14Operator

End

1

Spring Return

4 2

5

#12OperatorEnd

3

#14Operator

End

1

Detented

C2N CCWCW

C1

EXHIN

Inline – Perpendicular Lever, 2-Position

Model Number Type Port Cv

422CR011K Spring Return 1/4" 2.2

422CR021K Spring Return 3/8" 2.9

422CR011W Detent Return 1/4" 2.2

422CR021W Detent Return 3/8" 2.9

Inline – Perpendicular Lever, 3-Position

Model Number Type Port Cv

422CR013W 1/4" 1.3

422CR023W 3/8" 1.3

422CR014W 1/4" 1.3

422CR024W 3/8" 1.3

3-Pos Spring Return,APB

3-Pos Spring Return,CE

Inline – Parallel Lever, 2-Position

Model Number Type Port Cv

422CS011K Spring Return 1/4" 2.2

422CS021K Spring Return 3/8" 2.9

422CS011W Detent Return 1/4" 2.2

422CS021W Detent Return 3/8" 2.9

Inline – Parallel Lever, 3-Position

Model Number Type Port Cv

422CS013W 1/4" 1.3

422CS023W 3/8" 1.3

422CS014W 1/4" 1.3

422CS024W 3/8" 1.3

16

42 Series, Spool Operated, 1/4" & 3/8" Ports,150 PSIG Max, 0°F to 140°F (-18°C to 60°C)

Air Control Valves – Spool Operated, 1/4", 3/8" Ports4-Way Manual / Mechanical ValvesModel Numbers

B DISCOUNT

3-Pos Spring Return,APB

3-Pos Spring Return,CE

Hand Valve – 90° Lever Movement, 3-Position

Model Number Type Port Cv

HVN4200-8 Mini 4-Port 1/4" 0.5

HVN4400-10 Medium 4-Port 3/8" 1.4

HVN4400-15 Medium 4-Port 1/2" 1.5

HV Series,Hand Operated, 1/4", 3/8" & 1/2" Ports,150 PSIG Max, 32°F to 140°F (0°C to 60°C)

4 2

5

#12OperatorEnd

3

#14Operator

End1

APB

4 2

5

#12OperatorEnd

3

#14Operator

End1

CE

Page 19: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Mufflers, Flow Controls, Silencers,Reclassifiers, Drip Leg Drains, Relief Valves

W DISCOUNT

Breather Vents – These low silhouette versions of the muffler/filter are useful where space is a problem and/or to preventcontamination. Use for vacuum relief or pressure equalization ingear boxes, oil tanks, reservoirs, etc.

Model Number Pipe Thread Hex Size

04702 0002 1/8" 7/16"

04704 0004 1/4" 9/16"

04706 0006 3/8" 11/16"

04708 0008 1/2" 7/8"

04712 0012 3/4" 1-1/6"

04716 0016 1" 1-5/16"

04720 0020 1-1/4" 1-11/16"

04724 0024 1-1/2" 2"

Max. Pressure250 PSIG

Sintered Bronze Muffler/Filters –Effectively reduce air exhaust noises to an industryaccepted level with minimum flow restriction. They

protect valves, impact wrenches, screwdrivers and other air tools bypreventing dirt and other foreign matter from entering the system.

Model Number Pipe Thread Hex Size

EM12 1/8" 7/16"

EM25 1/4" 9/16"

EM37 3/8" 11/16"

EM50 1/2" 7/8"

EM75 3/4" 1-1/6"

EM100 1" 1-5/16"

EM125 1-1/4" 1-11/16"

EM150 1-1/2" 2"

Max. Pressure250 PSIG

Muffler/Flow Controls – Provides an acceptable exhaustnoise level and effectively meter exhaust. Installed in valve exhaustports, they control cylinder piston speeds throughout a wide range.The adjusting screw cannot be accidently blown out, can be lockedto maintain setting. Brass and bronze construction.

Model Number Pipe Thread Hex Size

04502 0002 1/8" 1/2"

04504 0004 1/4" 9/16"

04506 0060 3/8" 11/16"

04508 0080 1/2" 7/8"

04512 0012 3/4" 1-1/16"

04516 0016 1" 1-5/16"Max. Pressure

250 PSIG

Silencer – Air mufflers designed to giveyou superior performance in noise control witha minimum effect on air efficiency. Fits directly

into the exhaust port of most commercial valves.

“AS” Plastic Body Silencers have an open surface area ofelement which allows for rapid discharge of air without undesirableback pressure.

Model NumberNPT BSPT (R) Pipe Size

AS-5 AS-5 M5

ASN-6 AS-6 1/8"

ASN-8 AS-8 1/4"

ASN-10 AS-10 3/8"

ASN-12 AS-15 1/2"

Max. Pressure150 PSIG

“ES” Silencers has metal slotted body which permits rapiddischarge of air without undesirable back pressure.

Model NumberNPT BSPT (R) Pipe Size

ES12MB ESB12MB 1/8"

ES25MB ESB25MB 1/4"

ES37MB ESB37MB 3/8"

ES50MB ESB50MB 1/2"

ES75MB ESB75MB 3/4"

ES100MB ESB100MB 1"

ES125MB ESB125MB 1-1/4"

ES150MB ESB150MB 1-1/2"Max. Pressure

250 PSIG

Muffler-Reclassifier – Eliminates unwanted oil mist andreduces exhaust noise from pneumatic valves, cylinders and airmotors. 99.97% efficient at removing the oil aerosols andalso acts as a silencer to lower the dBA levels belowO.S.H.A. requirements.

Model Number Pipe Thread

ECS3A 1/2"

ECS5A 1"

Max. Pressure 100 PSIG

17

Model Numbers

“P6M” Plastic Silencer is designed to give excellent noisereduction with a minimum effect on air efficiency. The “Trimline”design allows for locating the silencer in the tightest places withoutextra plumbing or fittings.

Max. Pressure246 PSIG

Model Number Port Thread

P6M-PAC5 M6

P6M-PAB1 G1/8

P6M-PAB2 G1/4

P6M-PAB3 G3/8

P6M-PAB4 G1/2

P6M-PAB6 G3/4

P6M-PAB8 G1

Relief Valve – This valve is designed to protect againstexcessive pressure buildup in a pneumatic circuit or system.

Model Number Pipe Thread Hex Size

RV01A1N100 1/4" 3/4"

Max. Pressure 200 PSIG

Page 20: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

Automatic Drip Leg Drain – Used at the bottom ofreceiver tanks and air line drops to drain water and oil build up incompressed air systems. This auto drain is ported 1/8" to pipe awayliquid. Drain has manual override and is easy to service.

Model Number Pipe Thread

06D1NA 1/4"

06D3NA 1/2"

Max. Pressure 250 PSIG

Drip Leg Drains, Lockout Valves

W DISCOUNT

Model Numbers

Zero Loss Drain – The WDV2 Electronic Demand DrainValves, with zero air loss, are suitable for all compressed air systemapplications from aftercoolers to filters to receivers to refrigerateddryers. These drain valves activate automatically and are bothreliable and economical.

Model Number

WDV2-425

Max. Pressure 232 PSIG

Automatic Electrical Drain Valve – The WDV3Electrical Drain is designed to automatically drain large amounts ofcollected water, while minimizing air loss from compressed airsystems. This drain is ideally suited to draining separators,receivers, refrigerated dryers, filters and drop legs.

Model Number Pipe Size Voltage

WDV3-G14BL 1/2" 120VAC

WDV3-G44BL 1/2" 24VDC

Max. Pressure 230 PSIG

External Compressor Drain – Automatically DrainsLiquid Water from Compressed Air Receiver

Model Number Port Size

X51-02-000 1/4"

Max. Pressure 200 PSIG

10

12

1

3

2

Lockout Valves – Lockout valves are installed in pneumatic drop legs, or individual pneumatic control lines.In accordance with OSHA procedures, lockout valves are used during maintenance and service procedures ofpneumatically (air) operated equipment. Safety yellow body with red, metal handle.

(Not available with muffler)

LV SERIES

NPT Ports 1 & 2 Port 3

LV3N6B 3/8" 3/4"

LV4N6B 1/2" 3/4"

LV6N6B 3/4" 3/4"

LV6NAB 3/4" 1-1/4"

LV8N6B 1" 1-1/4"

LVANAB 1-1/4" 1-1/4"

BSPP "G" Ports 1 & 2 Port 3

LV3B6B 3/8" 3/4"

LV4B6B 1/2" 3/4"

LV6B6B 3/4" 3/4"

LV6BAB 3/4" 1-1/4"

LV8B6B 1" 1-1/4"

LVABAB 1-1/4" 1-1/4"

Max. Pressure250 PSIG

EZ SERIES

NPT Ports 1 & 2 Port 3

EZ03NB6 3/8" 3/4"

EZ04NB6 1/2" 3/4"

EZ06NB6 3/4" 3/4"

EZ06NBA 3/4" 1-1/4"

EZ08NBA 1" 1-1/4"

EZ0ANBA 1-1/4" 1-1/4"

BSPP "G" Ports 1 & 2 Port 3

EZ03BB6 3/8" 3/4"

EZ04BB6 1/2" 3/4"

EZ06BB6 3/4" 3/4"

EZ08BBA 1" 1-1/4"

18

Page 21: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

19

Model Numbers

B DISCOUNT

Needle Valves, Check Valves,Quick Exhaust Valves

Needle Valves – provide excellentbi-directional speed (flow) control for fluid powerapplications.

“SPN” Needle Valves are manufactured with a two step needle.Fine metering is accomplished over the initial adjustment turns andnominal metering is provided over the remaining turns. Once thedesired flow is selected, a set screw can be tightened to maintainthe setting.

Model Number Pipe Thread Flow (SCFM†)

SPN200B 1/8" 8.8

SPN400B 1/4" 19.3

SPN600B 3/8" 33.1

SPN800B 1/2" 55.2Max. Pressure

2000 PSIG

“338” Needle Valves features a fine tapered needle providingprecise flow of air in both directions. Numerical micrometer positionmarkings are stamped on the perimeter of the adjustment knobwhich provide a visual indication of the setting. This series isrecommended for pneumatic service.

Model Number Pipe Thread Flow (SCFM†)

00338 1100 1/8" 15

00338 1101 1/4" 28

00338 1102 3/8" 59

00338 1103 1/2" 126

00338 1104 3/4" 140Max. Pressure

250 PSIG

† At 100 PSIG inlet pressure with full pressure drop.

Check Valves – Check valves provide free flowof air or oil in one direction and dependable shutoff inthe opposite direction. These valves are available withNPTF ports in 1/8", 1/4", 3/8", 1/2" and 3/4" sizes.

“SPC” Check Valves – 1/8" to 1/2" NPTF ports.

Model Number Pipe Thread Flow (SCFM†)

SPC200B 1/8" 29.2

SPC400B 1/4" 86.1

SPC600B 3/8" 125.3

SPC800B 1/2' 282.0Max. Pressure

2000 PSIG

“339” Check Valves – 1/8" to 3/4" NPTF ports.

Model Number Pipe Thread Flow (SCFM†)

00339 3000 1/8" 35

00339 3001 1/4" 75

00339 3002 3/8" 143

00339 3003 1/2" 162

00339 3004 3/4" 323Max. Pressure

250 PSIG

Model Number Pipe Thread Flow (SCFM†)

03047 0099 1/4" 30Max. Pressure250 PSIG

† At 100 PSIG inlet pressure with full pressure drop.

Mounting Bracket Kit03640 8100(Including body screws)For “0R12” and “0R25” sizes.

12

3

Quick Exhaust Valves – Provide rapid exhaust of control airwhen placed between control valve and actuator. They can also be usedas shuttle valves. Diaphragm materials are available in urethane, Nitrile,Fluorocarbon, and PTFE to meet a wide variety of operating conditions.

Port Size Flow Urethane Nitrile Fluorocarbon PTFE

(SCFM†)Hex Diaphragms Diaphragms Diaphragms Diaphragms

1 2 3 Part Number Part Number Part Number Part Number

1/8" 1/8" 1/8" 70 7/8" Sq. 0R12B —— 0R12VB ——

1/4" 1/4" 1/4" 90 7/8" Sq. 0R25B —— 0R25VB ——

3/8" 3/8" 3/8" 240 1" Hex 0R37B 0R37FB 0R37VB 0R37TB

1/2" 1/2" 1/2" 450 1-1/2" Hex 0R50B 0R50FB 0R50VB ——

3/4" 3/4" 3/4" 550 1-1/2" Hex 0R75B 0R75FB 0R75VB ——

† At 100 PSIG inlet pressure with full pressure drop.

“3047” Check Valves – 1/4" male pipe connection.

Max. Pressure150 PSIG(200 PSIGfor PTFE)

Page 22: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 Flow Control Valves“SPF”, “337”, “3250”, “3250” Extra LargeModel Numbers

B DISCOUNT

Flow Control Valves – Are used to control the air flow of actuators.Flow Controls are a combination needle valve and a check valve whichproduces metered flow in one direction, and free flow in the other direction.Flow Controls are typically mounted between a valve and an actuator with freeflow going into the actuator (meter out).

Flow (SCFM†)Model Number Port Size Controlled Flow Free Flow

SPF200B 1/8" 8.8 25.4

SPF400B 1/4" 19.3 55.2

SPF600B 3/8" 33.1 99.3

SPF800B 1/2" 55.2 138.0Max. Pressure 2000 PSIG

“SPF” Series Flow Control Valves – meter flow of air or oil in one direction and allow free flow in the reverse direction.

“SPF” Series valves are manufactured with a two step needle. Fine metering is accomplished over the initial adjustment turns and nominalmetering is provided over the remaining turns. Once the desired flow is selected, a set screw can be tightened to maintain the setting.

Flow (SCFM†)Model Number Port Size Controlled Flow Free Flow

00337 1000 1/8" 15.0 32.0

00337 1001 1/4" 28.0 75.0

00337 1002 3/8" 59.0 139.0

00337 1003 1/2" 126.0 183.0

00337 1004 3/4" 140.0 327.0Max. Pressure 250 PSIG

“337” Series Flow Control Valves – meter flow of air in one direction and allow free flow in the reverse direction.

“337” Series valves are manufactured with a fine tapered needle providing precise flow control, even at low flow rates. The perimeter of theadjustment knob features numerical micrometer position markings providing a visual indication of the setting. Once the desired flow isselected, a set screw can be tightened to maintain the setting. This series is recommended for pneumatic service.

Flow (SCFM†)Model Number Port Size Controlled Flow Free Flow

03250 0119 1/8" 70.0 60.0

03250 0219 1/4" 130.0 120.0

03250 0319 3/8" 220.0 205.0

03250 0419 1/2" 295.0 346.0

03250 0519 3/4" 420.0 615.0

Max. Pressure400 PSIG-Air

800 PSIG-Hydraulic

“3250” Series Flow Control Valves – are specifically designed to accurately meter the flow of air in one direction and allow free flow inthe opposite direction. “3250” is the highest flowing flow control series on the market. These valves are also suitable for low pressure hydraulicservice.

Flow (SCFM†)Model Number Port Size Controlled Flow Free Flow

03250 1000 1" 1000

03250 1250 1-1/4" 1200

03250 1500 1-1/2" 1800Max. Pressure 250 PSIG

“3250” Series (Extra Large) Flow Control Valves – these extra large flow control valves have been developed to provide effective flowsettings for large diameter cylinders and for other similar air applications. Each valve has a fine screw adjustment allowing precise settingswhich are secured by a sturdy lock nut.

20

† At 100 PSIG inlet pressure with full pressure drop.

Page 23: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 POL-1Authorization to Return (Page 1 of 3)A.T.R. Procedure

21

AUTHORIZATION TO RETURN (A.T.R.) PROCEDUREThis policy establishes the procedure for returning product to the Pneumatic Division.All returns are to be made freight prepaid to the location specified on the packing list provided for the return, unless otherwisespecified on the ATR. Shipping locations are as follows:

Pneumatic Division North America Pneumatic Division North America Pneumatic Division North America8676 East M-89 Rd. #1 9 Cutts RoadRichland, MI 49083 Canton, PA 17724 Kittery, ME 03904

PROCEDURES GENERAL GENERAL ANNUAL WARRANTY REPAIR &RETURNS - RETURNS - STOCK see POL-2 CHARGEDistributor PDN error ADJUSTMENT for procedure RETURNS

error or distributorchange expense

Distributor will be notified sixty (60) days inadvance of Annual Stock Adjustment month.Annual Stock Adjustments are allowed only fordistributors with >$50,000 in purchases over thelast fiscal year of sales. Return allowance is 3%of last 12 month purchases. X

Value of this return must meet $100 minimumnet value per invoice. If <$100 net, distributormust hold for annual return.If >$100 net, return will be processed withrestock charge per POL-5 guidelines. X

Contact Customer Support for Request for ATR X X

Contact Applications Engineering forProduct Failure Report X X

Complete and return Request for ATR X X

See request form for non-returnable products. X X X

Product must be less than 25 months old X

Complete and return Product Failure Report X X

Product must be less than 18 months old X

Request must be made within 30 days ofreceipt of goods X

Cost to repair product is quoted for non-warrantyrequests - see Service Procedure for SerialBus Controls - POL-11 for repair ofserial bus modules X

Returns of Isys and Moduflex products availablefor sale in masterpack quantities will be creditedat masterpack pricing only X X X X X

Distributor provides purchase order forrepair costs X

Approved ATR packing list will be emailed orfaxed to Distributor same day X X X X

Approved ATR packing lists will be faxedto Distributor the following day X

(Continued on next page.)

Contact phone: 269-629-5575

Page 24: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0707 POL-1Authorization to Return (Page 2 of 3)A.T.R. Procedure

22

ATR packing list is enclosed in package,noting # of pkgs X X X X X

ATR # is marked on outside of allpkgs. shipped X X X X X

Product should be properly packaged andskidded to avoid damage to product in transit.Individual cartons should weigh no more than40 lbs and should contain no packaging materialthat can contaminate product. Damagedproduct resulting in improper packagingwill be scrapped without credit. Distributorwill be responsible for recovering damagesfrom carrier. X X X X X

Product must be returned within 30 days.ATR will be cancelled after 30 days andreturn unallowed. X X X X

Product must be returned within 60 days.ATR will be cancelled after 60 days andreturn unallowed. X

All product must be returned in one (1)shipment per location X X X X X

Only product included on original ATR may bereturned - unauthorized products returnedwill be returned to distributor atdistributor’s cost X X X X X

Distributor should refer to POL-5 for restockingfee schedule and Authorization for Returnform for listing of nonreturnable products X X

Distributor ships product to location specifiedon packing list - Cost of forwarding productto correct location will be charged todistributor and deducted from credit X X X X X

Product not returned in like-new packagingwill incur a 20% rebox fee - fee will bededucted from credit and is in additionto restock fee X X X

Product returned incomplete (e.g. solenoidvalve was shipped - product is returnedwithout the solenoid) will be returned todistributor at distributor’s cost X

Credit will be calculated at original invoiceprice - discrepancies and fees will benoted on credit memo X X X

Credit will be calculated at current list priceless distributor discount - discrepancies andfees will be noted on credit X

Product returned and deemed unacceptablewill be returned to distributor atdistributor’s cost X X X

Product returned and deemed as notcovered under warranty will be returnedas is to distributor at distributor’s cost X

PROCEDURES GENERAL GENERAL ANNUAL WARRANTY REPAIR &RETURNS - RETURNS - STOCK see POL-2 CHARGEDistributor PDN error ADJUSTMENT for procedure RETURNS

error or distributorchange expense

Page 25: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

23

REQUEST FOR AUTHORIZATION TO RETURN (ATR)[Contact Customer Support at 269-629-5575 if you have questions.]

COMPLETE THIS FORM AND RETURN TO PDN.

FAX TO: Customer Support Dept. 269-629-5385

From: _______________________________________________________

DATE: ______________________________

CUSTOMER NAME: _______________________________________________ PHONE: _______________________________________

CUSTOMER ACCOUNT NO.: _______________________________________ FAX: _________________________________________(or address if account # unknown)

REASON FOR RETURN:

Customer Error - if you checked this box, please answer the following:Are you allowed an Annual Return to PDN? (if in doubt, call Customer Service)

NO If no, continue.

YES If yes, STOP. Product must be held for Annual Return

Parker Pneumatic Division Error

Give reason (be specific): ________________________________________________________________________

_____________________________________________________________________________________________

PART NO. TO RETURN: ______________________________________ QTY: _____________________

DATE CODE ON PRODUCT: __________________________________

ORIGINAL SALES ORDER OR INVOICE OR PURCHASE ORDER NO.: _________________________________

IS REPLACEMENT REQUIRED? _______ If yes, replacement order will be entered by the Pneumatic Division.

IS PRODUCT ANY OF THE FOLLOWING?PIPE NIPPLED/WOUND FRL COMBO SURPLUS FROM CONVERSION POLYCARBONATE BOWLMANIFOLD ASSEMBLY MAINTENANCE PARTS DISCONTINUED PRODUCTREPAIR KIT (All are subject to pre-authorization for return - contact Division)

YES If yes, STOP. This product cannot be returned.

NO If no, send this form to the Pneumatic Division. It will be returned to youwith ATR # assigned or reason for denial.

IS PRODUCT LESS THAN 25 MONTHS OLD, BASED ON THE DATE CODE OF MANUFACTURE?

YES If yes, continue.

NO If no, STOP. This product cannot be returned.

IS PRODUCT OF CURRENT DESIGN (refer to current catalog and PDN Product Change Notices)?

YES If yes, continue.

NO If no, STOP. This product cannot be returned.

IS PRODUCT IN RESALABLE CONDITION AND IN ORIGINAL SEALED PACKAGE?

YES If yes, continue.

NO If no, STOP. This product cannot be returned.

IS PRODUCT A PROPRIETARY SPECIAL, BUILT TO CUSTOMER SPECIFICATIONS?

NO If no, continue.

YES If yes, STOP. This product cannot be returned.

This request has been approved. ATR # __________________________

THIS ATR PACKING LIST HAS BEEN EMAILED TO THE ADDRESS STATEDABOVE AND SHOULD BE INCLUDED WITH SHIPMENT.

This request has been denied for the following reason: _______________________________________________________________

_______________________________________________________________________________________________________________POL-1

Page 26: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 POL-4Standard Terms & Conditions (Page 1 of 2)Terms & Conditions

24

Standard Terms & ConditionsTerms: Standard Terms - Orders Entered at Factory EDI or Phconnect Order Entry Invoices dated 1st - 15th: 1% 25th of same month Invoices dated 1st - 15th: 2% 25th of same month Invoices dated 16th - 31st: 1% 10th of following month Invoices dated 16th - 31st: 2% 10th of following month Net 30 Net 30

Freight: FOB Ship Point. No freight allowance.

Factory Entered Order Discount Penalty:Orders faxed, mailed or emailed to the factory will incur a 3-discount point reduction on all items ordered (e.g., Items with a standard or quoted discount of 50% would receive 47% discount). Orders entered via EDI or Phconnect will receive entire allowed discount.

For information regarding EDI or PHconnect, contact the Pneumatic Division: EDI - contact Tammy Bailey at 269-629-5000 PHconnect - contact Christy Taugher at 269-629-5000

Expedite Premiums:An expedite premium of 5% of customer net price will be assessed under the following conditions: • An item is requested to ship inside of seven calendar days, AND • The item is a non-R (ready) item in the PDN price list, AND • The item is not on-hand and available

The actual promised ship date of all items will be acknowledged. If PDN is unable to ship by the PDN acknowledged promised date, the premium will be waived. The expedite premium will be presented as a separate line item on the customer invoice. Line items that fall into the expedite category will ship separately from regular consolidated shipments. This is very important, as expedited orders may impact your freight costs.

Expedite orders cannot be guaranteed to ship same day as order entry.

Quoted Orders - see POL-12 for Rebate and Agency Policy: Quote numbers must be referenced on all purchase orders sent to the factory for order entry. Direct and agency quote numbers must be referenced at the time of order entry when placed electronically

by the customer.

Failure to properly reference quote at time of order entry will result in a $50 administration fee to process approved credits. Credits will be issued for only those orders that result in a net credit of $75 before assessment of administration fee.

Scheduled or Blanket Orders:Must be placed on a separate purchase order with required ship dates. Orders may be placed for annual requirements with a maximum of 12 releases. All shipments must be scheduled by January 31st of the subsequent calendar year - exception to this rule will be made only for products that are quoted, which may schedule releases up to the expiration date of the quote. Releases are considered firm for 30 calendar days and may not be altered during this period. Future releases may be altered with 30 days notice.

Order Acknowledgments:Orders will be acknowledged per customer request in one of two ways: • All product shipped the same or following day as order entry will be acknowledged via a shipment

confirmation the day following actual shipment • All remaining product will be acknowledged via an order acknowledgment two days following

order entry to allow planners to provide actual promise dates Shipment confirmations and order acknowledgments may be received via fax or email only.

Contact Phone: 269-629-5575

(Continued on next page.)

Page 27: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 POL-4Standard Terms & Conditions (Page 2 of 2)Terms & Conditions

25

Order Cancellations:Cancellation of orders will result in a cancellation fee for all product not identified as an “R” item in the PDN price list, that has been started in production AND is requested to be cancelled more than 24 hours after order entry. A cancellation fee of 30% of the net price will be presented as a line item on the customer invoice for each cancelled item.

Orders may not be cancelled permanently for proprietary product being held as safety stock under a written agreement by the customer.

Additional cancellation charges may apply if excess amount of material was purchased to build the order - cancellation fee will equal the value of excess material or customer may purchase the material in lieu of cancellation fee.

Orders Placed on Hold:PDN will place orders on hold at customer request within the following guidelines: • Scheduled orders may not be placed on HOLD if within 28 calendar days of shipment • Scheduled or blanket orders may not be placed on HOLD past required ship dates expressed in

“Scheduled or Blanket Orders” section of this document • Orders may not be placed on HOLD for more than 30 days. Orders that are left on HOLD for a longer

period will be cancelled and customer notified that they must place a new order for product • Placing an order on HOLD will result in the release of allocated product to other orders and order will

be treated as though it were a new order placed once it is released from HOLD

Reporting Shortages:All claims for product shortages or damages must be filed with PDN within 30 days of shipment, or shall otherwise be waived. No claim shall exceed the purchase of the material ordered.

Page 28: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108 POL-8Box Quantity & Tubing/Hose LengthBox Quantities

26

BOX QUANTITY AND TUBING/HOSE LENGTH

The following products are sold in box quantities:

* Accessories * Oil* Air chucks * Quick couplers* Blow guns * Silencers* Breather vents * Speed control mufflers* Fittings * Telepneumatic parts* Hose connectors * Miscellaneous parts and kits* Nozzles

These products are priced per piece. Order quantities are automatically increased to box quantity increments.

Hose and TubingAll hose and tubing are sold as complete reels. Reel lengths are shown in the Package Quantity section of price lists, in product catalog descriptions, and in the part number description field in TOPS/EDI/PHconnect.

Important Note:

Orders must be placed in ft. quantities equal to a roll. Orders enetered in quantities that are not equal to a full roll will automatically be increased to a full roll quantity.

Customer Support: 269-629-5575

Page 29: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

27

POL-12Pricing, Rebate & Agency Policy (Page 1 of 2)Rebate & Agency Policy

PNEUMATIC DIVISION REBATE POLICY1. With prior agreement with the responsible Pneumatic Regional Manager or Pneumatic Territory Manager, the Distributor

may choose to designate a particular Customer as a Rebate Account.

2. Based on the competitive situation and the product families, pricing levels to the Customer and rebate percentages to theDistributor will be determined and formalized with a formal Quotation. A copy of this Quotation will be forwarded to theresponsible Pneumatic Territory Manager.

3. The Distributor will purchase requirements from the Pneumatic Division at assigned STANDARD discount off establishedand current list prices.

4. The Distributor will invoice the Customer at the predetermined price level as referenced on formal Quotation document.

5. Rebate Claims should be submitted on a monthly basis.a. Claims will be batched for processing if the total rebate value is below $75.00 for a single (1) month.b. If total rebate claims are less than $75.00 after a six (6) month period, the Pneumatic Division will pay

the amount due and the rebate quote will be cancelled.

6. The Distributor will submit the following to claim rebates:a. Completed Rebate Claim Submittal Form as shown on following page (see attached PDF). If feasible, the

Distributor can also submit this electronically in a Microsoft Excel spreadsheet to [email protected]. Invoice documentation to Customer showing quote number, quantity, sell price, cost, and rebate requested.

7. Rebate Claim documentation should be sent to: PDN Rebate Claims CoordinatorParker Hannifin Corp.Pneumatic Division8676 East M-89Richland, MI 49083Email: [email protected]

8. Rebates will be paid as follows:a. In accordance with the predetermined percentage based on the invoiced amount to the Customer.b. In the form of a Credit Memo to the Distributor.

9. Rebate Claims will be invalid unless defined in a formal Quotation PRIOR to order entry and acceptance.

10. Rebate Claims will be invalid if the Order Date is past the Quotation Expiration Date.

11. Incorrect or incomplete Rebate Claims will be returned to the Distributor.

12. The Pneumatic Division will not accept any rebate claims beyond ninety (90) days from the Invoice Date.

13. Additional Rebate Policy or Claim queries should be directed to the Pneumatic Territory Manager or theDivision Pricing Manager.

PNEUMATIC DIVISION AGENCY POLICY1. With prior agreement with the Pneumatic Regional Manager or Pneumatic Territory Manager, the Distributor may choose

to designate a particular Customer as an Agency Account.

2. Pricing levels to the Customer and Agency Commissions to the Distributor will be determined based on the following:competitive situation, product families and the Distributor's service levels to the Customer.

3. The Customer will be quoted directly by the Pneumatic Division. Copies of the formal Quotation and Agent CommissionAgreement will be forwarded to the Distributor and the responsible Pneumatic Territory Manager.

4. The Customer's Purchase Order should be made out to the Pneumatic Division, in care of the Distributor receiving theAgency Commission and referencing the Distributor AND the Agency Quotation Number.

5. The Distributor should audit the Customer order for correctness and forward to the Pneumatic Division.

6. The Distributor should service all the Customer's needs as pre-agreed in the Quotation and Agent Commission Agreement.

7. On a monthly basis, the Distributor will be sent an Agency Commission Statement and Credit Memo for all shipmentsto the Customer as designated in the Quotation and Agent Commission Agreement.

8. All Special Pricing and Agent Arrangements will be invalid unless defined in a formal Quotation and Agent CommissionAgreement PRIOR to order entry and acceptance.

9. In the event that either party, Customer or Distributor, does not honor the established Payment or Quotation Terms,the Pneumatic Division reserves the right to rescind the Agent Commission Agreement.

10. Additional Agency Agreement queries should be directed to the Pneumatic Territory Manager or theDivision Pricing Manager.

(Continued on next page.)

Page 30: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0108

28

POL-12Pricing, Rebate & Agency Policy (Page 2 of 2)Rebate & Agency Policy

y ( g )

DISTRIBUTOR REBATE FORM

DISTRIBUTOR _________________________________ DATE SUBMITTED _____________________________

ACCOUNT # __________________________________ MONTH ENDED _______________________________

REBATE REBATE DISTRIBUTOR % SALES TOTALACCOUNT QUOTE # INVOICE # REBATE SUBJECT REBATE

NAME (EX 123456-000-12) (ATTACHED) DUE TO REBATE DUE

TOTALS

Page 31: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0707

Alpha-Numeric Pricing

29

R RUNIT D B PKG UNIT D B PKG

PART NUMBER PRICE D CAT Q DESCRIPTION QTY PART NUMBER PRICE D CAT Q DESCRIPTION QTY

003371000 20.70 B AFD R FLOW CONTROL VALVE 1/8 520811000 76.50 B VNC 2 4-WAY 2-POS LEV/SPR RET VALVE003371001 26.40 B AFD R FLOW CONTROL VALVE 1/4 520831000 75.10 B VNC R 4-WAY 2-POS LEV/MAN RET VALVE003371002 35.10 B AFD R FLOW CONTROL VALVE 3/8 520931000 90.40 B VNC 4 4-WAY 2-POS TRE/MAN RET VALVE003371003 47.50 B AFD R FLOW CONTROL VALVE 1/2 521811000 91.70 B VNC R 4-WAY 3-POS LEV/SPR RET VALVE003371004 63.70 B AFD R FLOW CONTROL VALVE 3/4 521831000 90.30 B VNC R 4-WAY 3-POS LEV/MAN RET VALVE003381100 18.00 B AFE R NEEDLE VALVE 1/8 522811000 95.70 B VNC 4 4-WAY 3-POS LEV/SPR RET VALVE003381101 23.90 B AFE R NEEDLE VALVE 1/4 522831000 94.30 B VNC 4 4WY 3PS LEV/MAN RET SPCL SPOOL003381102 32.90 B AFE R NEEDLE VALVE 3/8 523831000 68.00 B VNC 4 3-WAY 3-POS LEV/MAN RET VALVE003381103 45.40 B AFE R NEEDLE VALVE 1/2 524211000 61.90 B VNC R 3-WAY 2-POS ROL/SPR RET VAL003381104 47.80 B AFE 2 NEEDLE VALVE 3/4 524251000 70.30 B VNC 4 3-WAY 2-POS ROL/PIL RET VALVE

003393000 14.90 B AFF R CHECK VALVE 1/8 524411000 60.20 B VNC R 3-WAY 2-POS BUT/SPR RET VALVE003393001 21.90 B AFF Q CHECK VALVE 1/4 524431000 58.80 B VNC R 3-WAY 2-POS BUT/MAN RET VALVE003393002 26.70 B AFF R CHECK VALVE 3/8 524451000 68.60 B VNC 4 3-WAY 2-POS BUT/PIL RET VALVE003393003 34.60 B AFF R CHECK VALVE 1/2 524711000 74.80 B VNC R 3-WAY 2-POS PED/SPR RET VALVE003393004 59.90 B AFF R CHECK VALVE 524751000 83.20 B VNC 4 3-WAY 2-POS PED/PIL RET VALVE030470099 18.20 B AFG R CHECK VALVE 524811000 62.50 B VNC R 3-WAY 2-POS LEV/SPR RET VALVE032500119 26.50 B AFH R FLOW CONTROL VALVE 1/8'' 524831000 61.10 B VNC R 3-WAY 2-POS LEV/MAN RET VALVE032500219 29.50 B AFH R A-FLOW CONTROL VALVE 1/4 524931000 76.40 B VNC 4 3-WAY 2-POS TRE/MAN RET VALVE032500319 38.40 B AFH R B-FLOW CONTROL VALVE 3/8 529811000 93.30 B VNC R 4-WAY 3-POS LEV/SPR RET VALVE032500419 53.70 B AFH R C-FLOW CONTROL VALVE 1/2 529831000 91.90 B VNC 4 4-WAY 3-POS LEV/MAN RET VAL

032500519 79.40 B AFH R D-FLOW CONTROL VALVE 3/4 02FA06A 11.20 W KCA R 1/4" FILTER GR6032501000 125.20 B AFH R 1''FLOW CONTROL 02FA10A 11.20 W KCA R 1/4" FILTER GRADE 10032501250 125.20 B AFH 2 1.25''FLOW CONTROL 02FA22A 11.20 W KCA 4 1/4" FILTER GR6 W/DYE032501500 149.80 B AFH 2 1.5''FLOW CONTROL 02L1B 37.30 W KLA 3 1/4" LUB036408100 6.20 B AE 2 Q E VAL MTG KIT 02L2B 37.30 W KLA 3 3/8" LUB045020002 9.70 W ASF R 1/8 SPEED CONTROL MUFFLR 5 04L10GB 41.70 W KLF R 1/4 LUB045040004 11.20 W ASF R 1/4 SPEED CONTROL MUFFLR 5 04L10GB-RET 46.50 W KLF Q 1/4" LUBRICATOR CLAMSHELLED 5045060060 13.40 W ASF R 3/8 SPEED CONTROL MUFFLR 5 04L13GB 46.10 W KMA B 1/4" LUB METAL/MAN045080080 15.40 W ASF R 1/2 SPEED CONTROL MUFFLR 5 05E12A13AB 53.00 W KEN R 1/4" PIGGYBACK045120012 25.50 W ASF R 3/4 SPEED CONTROL MUFFLR 5 05E14A13AB 58.80 W KEN 1 1/4" PIGGYBACK

047020002 3.80 W ASB R BREATHER VENT 1/8" 5 05E1PA13AB 67.00 W KEN 1 1/4 POLY/PULSE/GUARD047040004 4.30 W ASB R BREATHER VENT 1/4" 5 05E1TA13AB 72.80 W KEN 1 1/4 METAL/PULSE/GUARD047060006 5.10 W ASB R BREATHER VENT 3/8" 5 05E22A13AB 53.00 W KEN 1 3/8" PIGGYBACK047080008 6.30 W ASB R BREATHER VENT 1/2" 5 05E22A13AB-RET 57.80 W KEN B 3/8" PIGGYBACK CLAMSHELLED 5047120012 10.20 W ASB R BREATHER VENT 3/4" 5 05E24A13AB 58.80 W KEN 1 3/8" PIGGYBACK047160016 13.40 W ASB R BREATHER VENT 1" 05E2PA13AB 67.00 W KEN 1 3/8" PIGGYBACK047200020 19.60 W ASB R BREATHER VENT 1-1/4" 05E2TA13AB 72.80 W KEN B 3/8" FILTER/REG047240024 21.90 W ASB R BREATHER VENT 1-1/2" 05F12AA 33.60 W KFN R 1/4" FILTER404111000 37.00 B VNA 2 POPPET VALVE-W/PLNGR 05F14AA 39.40 W KFN 1 1/4" FILTER404211000 40.10 B VNA R POPPET VALVE W/ROLLER 05F1PAA 47.60 W KFN 1 1/4" FILTER

404311000 47.50 B VNA 2 POPPET VALVE W/TRIPPER 05F1TAA 53.40 W KFN 1 1/4" FILTER404411000 43.20 B VNA 1 POPPET VALVE W/BUTTON 05F22AA 33.60 W KFN R 3/8" FILTER404711000 44.30 B VNA 2 POPPET VALVE W/HAND LEVER 05F22AA-RET 37.80 W KFN B 3/8" FILTER CLAMSHELLED 5404811000 44.30 B VNA R POPPET VALVE W/LOCK DOWN 05F24AA 39.40 W KFN 1 05 FILTER 3/8" PORTS410111000 50.70 B VNB R 4WAY SPOOL VAL PLGER& SPR 05F2PAA 47.60 W KFN 1 3/8 FILTER/POLY/PULSE410121000 52.90 B VNB 2 4 WAY SPOOL VALVE 05F2TAA 53.40 W KFN 1 3/8 FILTER/MET/PULSE410151000 57.10 B VNB 2 4 WAY SPOOL VALVE 05R113AD 28.80 W KRN R 1/4" REGULATOR410211000 53.80 B VNB R 4WAY SPOOL VALVE-ROLLER 05R118AD 41.20 W KRN 1 1/4" REGULATOR W/GAUGE410221000 56.00 B VNB 2 4 WAY SPOOL VALVE 05R213AD 28.80 W KRN R 3/8" REGULATOR410251000 60.20 B VNB 2 4 WAY SPOOL VALVE 05R213AD-RET 35.00 W KRN B 3/8" REGULATOR CLAMSHELLED 5

410311000 61.20 B VNB 2 4 WAY SPOOL VALVE 05R218AD 41.20 W KRN 1 05 REGULATOR 3/8" PORTS410321000 63.40 B VNB 2 4 WAY SPOOL VALVE 06D1NA 70.90 W KFV 1 1/4" DRIPLEG DRAIN410351000 67.60 B VNB 2 4 WAY SPOOL VALVE 06D3NA 70.90 W KFV 1 1/2" DRIPLEG DRAIN410411000 56.90 B VNB 2 4 WAY SPOOL VALVE 06E12A13AC 92.90 W KEB 1 1/4"PIGGYBACK P.BOWL410421000 59.10 B VNB 2 4 WAY SPOOL VALVE 06E14A13AC 99.30 W KEB 1 1/4"PIGGYBACK M.BOWL TWIST DRN410451000 63.30 B VNB 2 4WAY SPOOL VALVE 06E16A13AC 123.90 W KEB 1 1/4" PIGGY 0-125 PSI410711000 58.00 B VNB 2 4 WAY SPOOL VALVE 06E18A13AC 130.30 W KEB 1 1/4"PIGGYBACK410721000 60.20 B VNB 2 4 WAY SPOOL VALVE 06E22A13AC 92.90 W KEB R 3/8" PIGGY 0-125 PSI410751000 64.40 B VNB 2 4WAY SPOOL VALVE 06E24A13AC 99.30 W KEB 1 3/8" PIGGY 0-125 PSI410811000 58.00 B VNB R 4WAY SPOOL VALV-LOCK DWN 06E26A13AC 123.90 W KEB 1 3/8" PIGGY 0-125 PSI

410821000 60.20 B VNB 2 4 WAY SPOOL VALVE 06E28A13AC 130.30 W KEB 1 3/8" PIGGY 0-125 PSI410931000 62.20 B VNB R 4 WAY SPOOL VAL-PUSH/PULL 06E32A13AC 92.90 W KEB R 1/2" FIL/REG410941000 64.40 B VNB 2 4 WAY SPOOL VALVE 06E34A13AC 99.30 W KEB 1 1/2" PIGGY 0-125 PSI410951000 68.60 B VNB 2 4 WAY SPOOL VALVE 06E36A13AC 123.90 W KEB 1 1/2" PIGGY 0-125 PSI414111000 46.50 B VNB R 3 WAY SPOOL VALVE 06E38A13AC 130.30 W KEB 1 1/2" PIGGY 0-125 PSI414121000 48.70 B VNB 2 3 WAY SPOOL VALVE 06F12AC 56.40 W KFB R 1/4" FILT 40 MIC414151000 52.90 B VNB 2 3 WAY SPOOL VALVE 06F14AC 62.80 W KFB 1 1/4" FILT 40 MIC414211000 49.60 B VNB R 3 WAY SPOOL VALVE-ROLLER 06F16AC 87.40 W KFB 1 1/4" FILT 40 MIC414221000 51.80 B VNB 2 3 WAY SPOOL VALVE 06F18AC 93.80 W KFB 1 1/4" FILT 40 MIC414251000 56.00 B VNB 2 3 WAY SPOOL VALVE 06F22AC 56.40 W KFB R 3/8"FILTER P. BOWL

414311000 57.00 B VNB 2 3 WAY VALVE 06F24AC 62.80 W KFB 1 3/8"FILTER M. BOWL SG414321000 59.20 B VNB 2 3 WAY SPOOL VALVE 06F26AC 87.40 W KFB 1 3/8"FILTER414351000 63.40 B VNB 2 3 WAY SPOOL VALVE 06F28AC 93.80 W KFB 1 3/8" FILTER M.BOWL AUTO DR414411000 52.70 B VNB 2 3-WAY SPOOL VALVE 06F32AC 56.40 W KFB R 1/2" FILTER414421000 54.90 B VNB 2 3 WAY SPOOL VALVE 06F32AC-RET 61.40 W KFB B 1/2" FILTER CLAMSHELLED 5414451000 59.10 B VNB 2 3-WAY SPL BUT/ PLT VALVE 06F34AC 62.80 W KFB 1 1/2" FILT 40 MIC414711000 53.80 B VNB 2 3 WAY SPOOL LEV/SPR VALVE 06F36AC 87.40 W KFB 1 1/2" FILT 40 MIC414721000 56.00 B VNB 2 3 WAY SPL LEV/SPR FT MT V 06F38AC 93.80 W KFB 1 1/2" FILTER414751000 60.20 B VNB 2 3 WAY SPOOL LEV/PIL VALVE 06L12BE 68.60 W KLB R 1/4" LUBRICATOR414811000 53.80 B VNB R 3 WAY SPOOL VAL-LOCK DWN 06L14BE 75.00 W KLB 1 1/4" LUBRICATOR-METAL BOWL S.G

414931000 58.00 B VNB R 3 WAY SPOOL VALV-PUSH/PUL 06L22BE 68.60 W KLB R 3/8" LUBRICATOR-WITH GUARD414941000 60.20 B VNB 2 3 WAY SPOOL VALVE 06L24BE 75.00 W KLB 1 3/8" LUBRICATOR M.BOWL S.G.414951000 64.40 B VNB 2 3 WAY SPOOL VALVE 06L32BE 68.60 W KLB 1 1/2" LUBRICATOR WITH GUARD520211000 75.90 B VNC R 4-WAY 2-POS ROL/SPR RET VALVE 06L32BE-RET 71.70 W KLB B 1/2" LUBRICATOR CLAMSHELLED 5520251000 84.30 B VNC 4 4-WAY 2-POS ROL/PIL RET VALVE 06L34BE 75.00 W KLB 1 1/2" LUB W/FILL PLUG520411000 74.20 B VNC R 4-WAY 2-POS BUT/SPR RET VALVE 06R113AC 43.20 W KRD R 1/4" REG 0-125 PSI520431000 72.80 B VNC R 4-WAY 2-POS BUT/MAN RET VALVE 06R118AC 55.60 W KRD 1 1/4" REG 0-125/GAGE520451000 82.60 B VNC 4 4-WAY 2-POS BUT/PIL RET VALVE 06R213AC 43.20 W KRD R 3/8" REG 0-125PSI RELV520711000 88.80 B VNC R 4-WAY 2-POS PED/SPR RET VALVE 06R218AC 55.60 W KRD 1 3/8" REG.0-125PSI RELV.W/GAGE520751000 97.20 B VNC 4 4-WAY 2-POS PED/PIL RET VALVE 06R313AC 43.20 W KRD R 1/2" REG 0-125 PSI

SHADED items indicate READY Products.

Page 32: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0707

Alpha-Numeric Pricing

30

R RUNIT D B PKG UNIT D B PKG

PART NUMBER PRICE D CAT Q DESCRIPTION QTY PART NUMBER PRICE D CAT Q DESCRIPTION QTY

06R313AC-RET 49.00 W KRD B 1/2" REGULATOR CLAMSHELLED 5 14E11B13FC 44.90 W KEE 2 1/4" PIGGY06R318AC 55.60 W KRD 1 1/2" REG 0-125/GAGE 14E11B18FC-RET 62.30 W KEE Q 1/4" PIGGYBACK CLAMSHELLED 507E22A13AC 114.70 W KEC 1 3/8" PIGGY 0-125 PSI 14E13B13FC 49.30 W KEE R 1/4" PIGGY 0-125PSI 5MIC07E24A13AC 121.60 W KEC 1 3/8" PIGGYBACK 14E15B13FC 50.50 W KEE R 1/4" PIGGY 0-125PSI 5MIC07E26A13AC 145.70 W KEC 1 3/8" PIGGY 0-125 PSI 14E17B13FC 54.90 W KEE R 1/4" PIGGY 0-125PSI 5MIC07E28A13AC 152.60 W KEC 1 3/8" PIGGY 0-125 PSI 14F01BB 27.20 W KFA R 1/8" FILTER POLY/MAN 5MIC07E32A13AC 114.70 W KEC R 1/2" PIGGYBACK 14F03BB 31.60 W KFA 2 1/8" FILTER MET/AUTO07E34A13AC 121.60 W KEC 1 1/2" PIGGYBACK 14F05BB 32.80 W KFA R 1/8" FILTER POLY/AUTO07E36A13AC 145.70 W KEC 1 1/2" PIGGYBACK 14F07BB 37.20 W KFA 2 1/8" FILTER MET/AUTO07E38A13AC 152.60 W KEC 1 1/2" PIGGY 0-125 PSI 14F11BB 27.20 W KFA 2 1/4" FILTER POLY/TWIST

07E42A13AC 114.70 W KEC 1 3/4" PIGGYBACK 14F11BB-RET 32.10 W KFA Q 1/4" FILTER CLAM SHELLED 507E44A13AC 121.60 W KEC 1 3/4" PIGGYBACK 14F13BB 31.60 W KFA R 1/4" FILTER MET/TWIST07E46A13AC 145.70 W KEC 1 3/4" PIGGYBACK 14F15BB 32.80 W KFA R 1/4" FILTER POLY/AUTO07E48A13AC 152.60 W KEC 1 3/4" PGY 0-125 14F17BB 37.20 W KFA 2 1/4" FILTER MET/AUTO07F22AC 77.20 W KFC 1 3/8" FILT 40 MICR 14R013FC 20.80 W KRA R 1/8" REG 0-125 PSI07F24AC 84.10 W KFC 1 3/8" FILT 40 MICR 14R018FC 33.20 W KRA R 1/8" REG 0-125/GAGE07F26AC 108.20 W KFC 1 3/8" FILT 40 MIC 14R113FC 20.80 W KRA R 1/4" REG 0-125 PSI07F28AC 115.10 W KFC 1 3/8" FILT 40 MICR 14R118FC 33.20 W KRA R 1/4" REG 0-160/GAGE07F32AC 77.20 W KFC R 1/2"FILTER 14R118FC-RET 37.40 W KRA Q 1/4" REG. 0-160 PSI GAUGE 507F34AC 84.10 W KFC 1 1/2"FILTER 15F12EA 73.60 W KCN 1 1/4" FILTER

07F36AC 108.20 W KFC 1 1/2"FILTER 15F14EA 79.40 W KCN 1 1/4" FILTER07F38AC 115.10 W KFC 1 1/2"FILTER 15F1PEA 87.60 W KCN 1 1/4"FILTER PULSE DRN/B.GUARD07F42AC 77.20 W KFC R 3/4" FILT 40 MICR 15F1TEA 93.40 W KCN 1 1/4 COAL FILTER07F44AC 84.10 W KFC 1 3/4" FILTER 40 MICR 15F22EA 73.60 W KCN 1 3/8" FILTER07F46AC 108.20 W KFC 1 3/4" FILTER 40 MICR 15F24EA 79.40 W KCN 1 15 COALESCER GRD 6 3/8" PORTS07F48AC 115.10 W KFC 1 3/4" FILT 40 MIC 15F2PEA 87.60 W KCN 1 3/8" FILTER07L22BE 83.20 W KLC 1 3/8" LUBRICATOR 15F2TEA 93.40 W KCN 1 3/8 FILTER07L24BE 90.10 W KLC 1 3/8" LUBRICATOR 15L12NA 44.00 W KMN R 1/4" LUBRICATOR07L32BE 83.20 W KLC R 1/2" LUBRICATOR 15L14NA 49.80 W KMN 1 1/4" LUBRICATOR07L34BE 90.10 W KLC R 1/2" LUBRICATOR 15L22NA 44.00 W KMN 1 3/8" LUBRICATOR

07L42BE 83.20 W KLC R 3/4" LUB W/FILL PLUG 15L22NA-RET 48.20 W KMN B 3/8" LUBRICATOR CLAMSHELLED 507L44BE 90.10 W KLC 1 3/4" LUBRICATOR 15L24NA 49.80 W KMN 1 3/8" LUBRICATOR07R213AC 67.70 W KRE R 3/8" REG 0-125 PSI RELV 15R218FB-RET 54.10 W KRB Q 3/8" REG. 0-125 PSI CLAMSHELL 507R218AC 80.10 W KRE 1 3/8" REG W/GAGE 16B22A18A2BCJ 256.60 W KBF 1 3/8" 3 PC COMBO07R313AC 67.70 W KRE R 1/2" REG 0-125PSI RELV 16L12BE 68.60 W KMB 1 1/4"LUBRICATOR07R318AC 80.10 W KRE R 1/2" REG 0-125/GAGE 16L14BE 75.00 W KMB 1 1/4" LUBRICATOR-M.BOWL SG07R413AC 67.70 W KRE R 3/4" REG 0-125PSI RELV 16L22BE 68.60 W KMB 1 3/8" LUBRICATOR07R418AC 80.10 W KRE 1 3/4" REG 0-125/GAGE 16L24BE 75.00 W KMB 1 3/8" LUBRICATOR09F83BB 675.80 W KFE 1 FILTER 2" F35-0C-000-35 16L32BE 68.60 W KMB 1 1/2" LUB W/B. GUARD09F87BB 706.80 W KFE 1 FILTER F35-0C-F00-35 16L34BE 75.00 W KMB 1 1/2" LUB W/FILL PLUG

09L84BA 593.30 W KLE 3 LUBRICTOR 2" L50-0C-G00-35 17L22BE 83.20 W KMC 1 3/8" LUBRICATOR09R813BA 546.00 W KRG 1 REGULATOR R40-0C-000-35 17L24BE 90.10 W KMC 1 3/8" LUB W/FILL PLUG0R12B 19.40 B AEA R 1/8" QUICK EXHAUST VALVE 17L32BE 83.20 W KMC R 1/2" LUBRICATOR0R12VB 24.40 B AEA 2 QUICK EXHAUST VALVE-VITO 17L34BE 90.10 W KMC 1 1/2" LUBRICATOR0R25B 19.40 B AEB R 1/4" QUICK EXHAUST VALVE 17L42BE 83.20 W KMC 1 3/4" LUBRICATOR0R25VB 30.40 B AEB R 1/4" QUICK EXHAUST VALVE 17L44BE 90.10 W KMC 1 3/4" LUBRICATOR0R37B 20.30 B AEC R 3/8" QUICK EXHAUST VALVE 18B57 21.70 W FXX 1 MOUNTING BRKT0R37FB 26.50 B AEC R 3/8" QUICK EXHAUST VALVE 30F73ECP 808.00 W KCG 4 1 1/2" COAL GRD 60R37TB 31.30 B AEC 2 3/8" QK EXH VLV (200 PSI) 31F83ECP 1,406.00 W KCH 4 2" COAL GRD 6/DPI0R37VB 33.80 B AEC R 3/8" QUICK EXHAUST VALVE 31F8LECP 1,528.00 W KCH 4 2" COAL GRD 6 W/DPI

0R50B 37.40 B AED R 1/2" QUICK EXHAUST VALVE 32F9LECP 1,596.00 W KCJ 4 2 1/2" COAL GRAD 60R50FB 40.00 B AED 2 1/2" QUICK EXHAUST VALVE 32FNLECP 2,297.00 W KCJ 4 3" FILTER GRADE 60R50VB 54.90 B AED 2 1/2" QUICK EXHAUST VALVE 422CR011K 118.80 B RWD 2 1/4"2POS-LEV.PERP0R75B 37.40 B AEE R 3/4" QUICK EXHAUST VALVE 422CR011W 123.00 B RWD R 1/4"2POS-LEV.PERP0R75FB 51.80 B AEE 2 3/4" QUICK EXHAUST VALVE 422CR013W 155.00 B RWD 2 1/4"3POS.LEV PERP ***0R75VB 54.90 B AEE R 3/4" QUICK EXHAUST VALVE 422CR014W 155.00 B RWD 2 1/4"3POS-LEV.PERP-DT ***10F01ED 49.10 W KCC 2 1/8" COAL FIL 5 SCFM 422CR021K 118.80 B RWD 2 3/8" 2POS-LEV.PERP.10F03ED 53.50 W KCC 2 1/8" FILTER 422CR021W 123.00 B RWD R 3/8"2POS-LEV.PERP10F05ED 54.70 W KCC 2 1/8" COAL GRD 6 422CR023W 155.00 B RWD 2 3/8"3POS-LEV.PERP10F07ED 59.10 W KCC 2 1/8" COAL FIL 5 SCFM 422CR024W 155.00 B RWD 2 3/8"3POS LEVER-DETN ***

10F11ED 49.10 W KCC R 1/4" COAL FILTER 6SCFM 422CS011K 118.80 B RWD 2 1/4" 2P LEV PAR10F13ED 53.50 W KCC 2 1/4" COAL FILTER 6SCFM 422CS011W 123.00 B RWD 2 1/4" 2POS-LEV.PAR10F15ED 54.70 W KCC 2 1/4" COAL FILTER 6SCFM 422CS013W 155.00 B RWD 2 1/4" 3POS-LEV.PAR10F17ED 59.10 W KCC 2 1/4" COAL FILTER 6SCFM 422CS014W 155.00 B RWD 2 1/4" 3POS-LEV.PAR11F12EC 107.50 W KCD 1 1/4"DPI COAL.FILTER GRADE 6 422CS021K 118.80 B RWD 2 3/8" 2POS-LEV.PAR11F14EC 113.90 W KCD 1 1/4"DPI COAL.FILTER-GRADE 6 422CS021W 123.00 B RWD 2 3/8" 2POS-LEV.PAR11F16EC 138.50 W KCD 1 1/4"DPI COAL.FILTER GRADE 6 422CS023W 155.00 B RWD 2 3/8" 3POS-LEV.PAR11F18EC 144.90 W KCD 1 1/4"DPI COAL FILTER GRADE 6 422CS024W 155.00 B RWD 2 3/8" 3POS-LEV.PAR.11F22EC 107.50 W KCD 1 3/8" COAL FILTER 422CT011K 139.90 B RWD 2 1/4" 2POS-FT.PEDAL ***11F24EC 113.90 W KCD 1 3/8" COAL GRD 6 422CT021K 139.90 B RWD 2 3/8"2POS-FT PEDAL

11F26EC 138.50 W KCD 1 3/8"DPI COAL FILTER GRADE 6 520A11000 80.10 B VNC 4 DIRECTAIR 4 VALVE11F28EC 144.90 W KCD 1 3/8"DPI COAL FILTER GRADE 6 520A51000 88.50 B VNC 4 1/4" 4W METAL ROLLER11F32EC 107.50 W KCD 1 1/2" COAL GRD 6 524A11000 66.10 B VNC 4 ROLLER SPR RETRN VALVE11F36EC 138.50 W KCD 1 1/2" COAL GRD 6 524A51000 74.50 B VNC Q 1/4" 3W NC METAL ROLLER12F22EC 143.30 W KCE 1 3/8" COAL GRD 6 9920-011X1P 113.50 W KXM 2 30F COAL ELE KIT12F24EC 150.20 W KCE 1 3/8" COAL GRD 6 9920-012X1P 120.60 W KXM 4 COAL ELEMENT KIT12F26EC 174.30 W KCE 1 3/8" COAL FILT GRD 6 9920-015X1P 113.50 W KXM 4 COAL ELEMENT KIT12F28EC 181.20 W KCE 1 3/8"COAL FILT GRD 6 AS-10 6.80 W ASA R SILENCER POLY 3/8 BSPT 1012F32EC 143.30 W KCE 1 1/2"COALESCG FILTER AS-15 8.10 W ASA R SILENCER POLY 1/2 BSPT 1012F34EC 150.20 W KCE 1 1/2"COALESCG FILTER AS-5 2.90 W ASA R SILENCER M5 20

12F36EC 174.30 W KCE 1 1/2"COALESCG FILTER AS-6 5.50 W ASA R SILENCER POLY 1/8 BSPT(PKG 10) 1012F38EC 181.20 W KCE 1 1/2"COALESCG FILTER AS-8 5.70 W ASA R SILENCER POLY 1/4 BSPT(PKG 10) 1012F42EC 143.30 W KCE 1 3/4" COAL FILT GRD 6 ASN-10 6.80 W ASA R SILENCER POLY 3/8" NPT 1012F44EC 150.20 W KCE 1 3/4" COAL GRD 6 ASN-6 5.50 W ASA R SILENCER POLY 1/8" (PKG 10) 1012F46EC 174.30 W KCE 1 3/4" COAL FILT GRD 6 ASN-8 5.70 W ASA R SILENCER POLY 1/4" NPT(PKG 10) 1012F48EC 181.20 W KCE 1 3/4" COAL FILT GRD 6 ECS3A 68.80 W ASE R RECLASSIFIER14E01B13FC 44.90 W KEE R 1/8" PIGGY 0-125PSI 5MIC ECS5A 77.00 W ASE R RECLASSIFIER14E03B13FC 49.30 W KEE 2 1/8" PIGGY 0-125PSI 5MIC EK602B 33.10 W FFL 1 40 MICRON ELEMENT14E05B13FC 50.50 W KEE 2 1/8" PIGGY 0-125PSI 5MIC EK602VB 33.10 W FFL 1 5 MICRON ELEMENT14E07B13FC 54.90 W KEE 2 1/8" PIGGY 0-125PSI EM100 20.30 W ASC R 1" MUFFLER/FILTER 1

SHADED items indicate READY Products.

Page 33: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0707

Alpha-Numeric Pricing

31

R RUNIT D B PKG UNIT D B PKG

PART NUMBER PRICE D CAT Q DESCRIPTION QTY PART NUMBER PRICE D CAT Q DESCRIPTION QTY

EM12 5.80 W ASC R 1/8" MUFFLER/FILTER 5 P3NKA00ESC 140.20 W KXV 1 GRADE 6 COALESCING ELEMENT KITEM125 32.10 W ASC R 1 1/4" MUFFLER/FILTER 1 P3NKA00ESE 35.50 W KXV 1 5 MICRON ELEMENT KITEM150 41.40 W ASC R 1 1/2" MUFFLER/FILTER 1 P3NKA00ESG 35.50 W KXV 1 40 MICRON ELEMENT KITEM25 6.00 W ASC R 1/4" MUFFLER/FILTER 5 P3NKA00MW 36.00 W KXV 1 WALL MOUNTING BRACKET KITEM37 8.30 W ASC 3 3/8" MUFFLER/FILTER 5 P3NKB16CP 40.00 W KXV 1 3/4" BSPP PORT BLOCKSEM50 10.90 W ASC R 1/2" MUFFLER/FILTER 5 P3NKB18CP 40.00 W KXV 1 1" BSPP PORT BLOCKSEM75 14.30 W ASC R 3/4" MUFFLER/FILTER 5 P3NKB1BCP 40.00 W KXV 1 1 1/2" BSPP PORT BLOCKSES100MB 23.90 W ASD R MUFFLER 1-11 1" NPT P3NKB96CP 38.80 W KXV 1 3/4" NPT PORT BLOCKSES125MB 47.60 W ASD R MUFFLER 1 1/4-11 1/2 NPT P3NKB98CP 38.80 W KXV 1 1" NPT PORT BLOCKSES12MB 10.50 W ASD R MUFFLER 1/8-27 NPT P3NKB9BCP 38.80 W KXV 1 1 1/2" NPT PORT BLOCKS

ES150MB 54.20 W ASD R MUFFLER 1 1/2-11 1/2NPT P3NLA96LSN 169.40 W KLM R P3N 3/4 LUBRICATORES25MB 10.50 W ASD R MUFFLER 1/4-18 NPT P3NLA98LSN 169.40 W KLM 1 P3N 1 LUBRICATORES37MB 15.60 W ASD R MUFFLER 3/8-18 NPT P3NLA9PLSN 199.40 W KLM 1 P3N 1 1/2 LUBRICATORES50MB 15.50 W ASD R MUFFLER 1/2-14 NPT P3NRA96BNG 144.50 W KRM 1 P3N 3/4" REGES75MB 23.90 W ASD R MUFFLER 3/4-14 NPT P3NRA96BNN 132.10 W KRM R P3N 3/4 REGULATORESB100MB 23.90 W ASD Q MUFFLER R 1 PARKER P3NRA98BNG 144.50 W KRM 1 P3N 1" REGESB125MB 47.60 W ASD R 1 1/4 EXHAUST SILENCER P3NRA98BNN 132.10 W KRM R P3N 1 REGULATORESB12MB 10.50 W ASD R MUFFLER R 1/8 PARKER P3NRA9PBNG 175.00 W KRM 1 P3N 1 1/2" REG.ESB150MB 54.20 W ASD Q MUFFLER R 1 1/2 PARKER P3NRA9PBNN 162.60 W KRM 1 P3N 1 1/2 REGULATORESB25MB 10.50 W ASD Q MUFFLER R 1/4 PARKER P6M-PAB1 5.70 W BAA Q MUFFLER 1/8 BSPP

ESB37MB 15.60 W ASD R MUFFLER R 3/8 PARKER P6M-PAB2 5.70 W BAA Q EXHAUST SILENCERESB50MB 15.60 W ASD Q MUFFLER R-1/2 PARKER P6M-PAB3 14.20 W BAA Q MUFFLER 3/8 BSPPESB75MB 23.90 W ASD R MUFFLER R 3/4 PARKER P6M-PAB4 14.20 W BAA Q ENGLISH MUFFLEREZ03NB6 142.40 B R8H 6 EZ LOCK OUT 3/8" P6M-PAB6 23.50 W BAA Q ENGLISH MUFFLEREZ04NB6 142.40 B R8I 6 EZ LOCK OUT 1/2" P6M-PAB8 37.80 W BAA Q ENGLISH MUFFLEREZ06NB6 195.40 B R8J 6 EZ LOCK OUT 3/4" P6M-PAC5 5.90 W ASC R MUFFLER POLY M5(PKG 5)EZ06NBA 195.40 B R8J 6 EZ LOCK OUT 3/4" PS401P 15.50 W KXE R 40M 04F KITEZ08BBA 218.60 B R8K 6 EZ LOCK OUT 1" BSPP PS403P 15.50 W KXE R 5M ELEMENT KITEZ08NBA 195.40 B R8K 6 EZ LOCK OUT 1" PS417BP 9.00 W KXE R 14FRL MOUNT.BRACKETEZ0ANBA 195.40 B R8L 6 EZ LOCK OUT 1 1/4" PS446P 26.30 W KXE R 10F ELEMENT KIT

F602-06WJ/M4 159.00 W FFL 2 F602-06WJ/M4 * PS452P 26.30 W KXE 4 CHARCOAL ELEMENT KITF602-06WJR/M4 190.00 W FFL 2 F602-06WJR/M4 PS456P 26.30 W KXE 2 GRADE 10 COAL ELEMF602-08WJ/M4 159.00 W FFL 2 F602-08WJ/M4 * PS506P 42.00 W KXY R AUTOMATIC DRAIN KITF602-08WJ/M4 159.00 W FFL 2 F602-08WJ/M4 * PS605P 22.40 W KXW 3 09R BRACKET GRP-95-734-35F602-10WJ/M4 191.40 W FFL 2 F602-10WJ/M4 PS701P 16.60 W KXG R ELEMENT KIT-40M PLASTICF602-10WJR/M4 222.40 W FFL 2 F602-10WJR/M4 PS702P 16.60 W KXG R 5M PLASTIC ELEMENT KITF602-12WJ/M4 191.40 W FFL 2 F602-12WJ/M4 PS707P 10.00 W KXG R MTG BRACKET KIT 06R-06F/RF602-12WJR/M4 222.40 W FFL 2 F602-12WJR/M4 PS724P 38.90 W KXG R ELEMENT KIT- COAL. GRADE 6 KITF602-16WJ/M4 622.00 W FFL 2 F602-16WJ/M4 PS730P 38.80 W KXG 1 ELEMENT KIT GRADE 10 COAL FILTF602-16WJR/M4 653.00 W FFL 2 F602-16WJR/M4 PS731P 50.90 W KXG 4 ADSORBER ELEMENT KIT - 06F

F602-20WJ/M4 622.00 W FFL 2 F602-20WJ/M4 PS743P 10.00 W KXG R MOUNTG.BRACKET KIT 06 F&LF602-20WJR/M4 653.00 W FFL 2 F602-20WJR/M4 PS751P 26.60 W KXG 1 3/8" PORT BLOCK KITF701-06E3P/M1 304.20 W FCM 2 F701-06E3P/M1 * PS752P 26.60 W KXG 1 1/2" PORT BLOCK KITF701-06E3PT/M1 342.30 W FCM 2 F701-06E3PT/M1 PS754P 9.30 W KXG R BODY CONN KITF701-08E3P/M1 304.20 W FCM 2 F701-08E3P/M1 PS755P 9.10 W KXG R WALL MOUNTING KITF701-08E3PT/M1 342.30 W FCM 2 F701-08E3PT/M1 PS756P 37.60 W KXG R 3/8" NPT LOCKOUT VALVEF701-C3-0773 69.10 W FCM 1 COAL EL 0.3 M PS757P 26.40 W KXG 1 MANIFOLD BLOCK KIT 06-PARKERF701-C3-0774 80.80 W FCM 4 COAL EL.3 MI PS765P 27.80 W KXG 3 1/4 BSP PORT BLOCKHVN4200-8 46.10 B RUE R 1/4" NPT VALVE PS766P 27.80 W KXG 3 3/8 BSP PORT BLOCKHVN4400-10 53.90 B RUE R 3/8" NPT VALVE PS767P 27.80 W KXG 3 1/2 BSP PORT BLOCK

HVN4400-15 71.20 B RUE R 1/2" NPT VALVE PS801P 18.30 W KXH R ELEMENT KIT-40M PLASTIC 07K4515N18160 12.40 W K3 R GAUGE 1.5 1/8-27 NPT 0-160 PS802P 18.30 W KXH R 5 MIC ELEMENT KIT-C DESIGNK4520N14160 12.40 W K3 R GAUGE 2 1/4-18 NPT 0-160 PS807P 10.00 W KXH R MOUNTG.BRACKET KIT 07R & F-R-EL606-06W/M8 161.20 W FLL 2 L606-06W/M8 * PS824P 43.20 W KXH R ELEMENT KIT- COAL. GRADE 6 KITL606-08W/M8 161.20 W FLL 2 L606-08W/M8 * PS830P 43.20 W KXH 1 ELEMENT KIT-GRADE 10 COAL FILTL606-10W/M8 194.00 W FLL 2 L606-10W/M8 PS831P 58.00 W KFC 4 ADSORBOR ELEM KITL606-12W/M8 194.00 W FLL 2 L606-12W/M8 PS843P 9.80 W KXH R MOUNTG.BRACKET KIT 07 F&LLV3B6B 102.20 B R8L 4 G3/8" LOCKOUT 3/4" EXH PS851P 27.70 W KXH 1 3/8"PRT BLK KITLV3N6B 102.20 B R8L 4 3/8" LOCKOUT 3.4" EXH PS852P 27.70 W KXH 1 1/2"PRT BLK KITLV4B6B 102.20 B R8L 4 G1/2" LOCKOUT 3/4" EXH PS853P 27.70 W KXH 1 3/4"PRT BLK KIT

LV4N6B 102.20 B R8L 4 1/2" LOCKOUT 3/4" EXH PS854P 9.90 W KXH R BODY CONNECTOR KITLV6B6B 102.20 B R8L 4 G 3/4" LOCKOUT 3/4" EXH PS856P 45.90 W KXH R 1/2" NPT LOCKOUT VALVELV6BAB 157.20 B R8L 3 G 3/4" LOCKOUT 1-1/4" EXH PS857P 28.60 W KXH 1 MANIFOLD BLOCKLV6N6B 102.20 B R8L 4 3/4" LOCKOUT 3/4" EXH PS860P 29.00 W KXH 3 G 3/4 PRT BLK KITLV6NAB 140.30 B R8L 3 3/4" LOCKOUT 1-1/4" EXH PS865P 29.00 W KXH 3 G 1/4 PRT BLK KITLV8BAB 157.20 B R8L 4 G 1" LOCKOUT 1-1/4" EXH PS866P 29.00 W KXH 3 G 3/8 PRT BLK KITLV8NAB 140.40 B R8L 4 1" LOCKOUT 1-1/4" EXH PS867P 29.00 W KXH 3 G 1/2 PRT BLK KITLVABAB 157.20 B R8L 4 G 1-1/4" LOCKOUT 1-1/4" EXH PS901P 15.50 W KXN 1 40 MICRON ELEMENTLVANAB 140.30 B R8L 4 1-1/4" LOCKOOUT 1-1/4" EXH PS902P 15.50 W KXN 1 5 MICRON ELEMENTP01531 4.10 W KXE R METAL NUT PS924P 32.70 W KXN 1 15F COAL GRADE 6 ELEMENT KIT

P04079B 6.20 W KXG R BRACKET NUT CAST PS930P 32.20 W KXN 1 15F GRADE 10 COAL ELEMENT KITP3NEA96GSABNN 320.70 W KEM 1 3/4" P3N FILTER/REGULATOR PS931P 40.90 W KXN 4 05 ADSORBER ELEMENT KITP3NEA96GSMBNN 289.70 W KEM R 3/4" P3N FILTER/REGULATOR PS943P 9.40 W KXN 1 WALL BRACKET KITP3NEA98GSABNN 320.70 W KEM 1 1" P3N FILTER/REGULATOR PS95002P 25.30 W KXN 1 3/8" PORT BLOCKP3NEA98GSMBNN 289.70 W KEM R 1" P3N FILTER/REGULATOR PS95010P 26.50 W KXN 3 1/8"BSPP PROT BLOCK KITP3NEA9PGSMBNN 319.70 W KEM 1 1-1/2" P3N FILTER/REGULATOR PS95011P 26.50 W KXN 3 1/4"BSPP PORT BLOCK KITP3NFA96DSA 348.80 W KCU 1 3/4" P3N COALESCERS W/DPI PS95012P 26.50 W KXN 3 3/8"BSPP PROT BLOCK KITP3NFA96DSM 317.80 W KCU 1 3/4" P3N COALESCERS W/DPI PS954P 6.80 W KXN R BODY CONNECTORP3NFA96GSA 203.60 W KFM 1 3/4" P3N FILTER PS955P 5.30 W KXN R WALL BRACKET-MODULARP3NFA96GSM 172.60 W KFM R 3/4" P3N FILTER PS95601P 50.50 W KXN 1 1/4" BALL VALVE

P3NFA98DSA 348.80 W KCU 1 1" P3N COALESCERS W/DPI PS95701P 19.20 W KXN 1 1/4" INLINE MANIFOLD BLOCKP3NFA98DSM 317.80 W KCU 1 1" P3N COALESCERS W/DPI PS963P 8.10 W KXN R 05REG. MOUNTING BRACKET KITP3NFA98GSA 203.60 W KFM 1 1" P3N FILTER PS964P 5.70 W KXN 1 05 PANEL MOUNTING NUT KITP3NFA98GSM 172.60 W KFM R 1" P3N FILTER R119-06C/M2 120.40 W FRL 2 R119-06C/M2 *P3NFA9PDSA 378.30 W KCU 1 1-1/2" P3N COALESCERS W/DPI R119-06CG/M2 132.80 W FRL 2 R119-06CG/M2P3NFA9PDSM 347.30 W KCU 1 1-1/2" P3N COALESCERS W/DPI R119-08C/M2 120.40 W FRL 2 R119-08C/M2 *P3NFA9PGSA 233.60 W KFM 1 1-1/2" P3N FILTER R119-08CG/M2 132.80 W FRL 2 R119-08CG/M2P3NFA9PGSM 202.60 W KFM 1 1-1/2" P3N FILTER R119-10C/M2 154.00 W FRL 2 R119-10C/M2P3NKA00ES9 113.60 W KXV 1 GRADE 10 COALESCING ELEMNT KIT R119-10CG/M2 166.40 W FRL 2 R119-10CG/M2P3NKA00ESA 140.20 W KXV 1 ADSORBER ELEMENT KIT R119-12C/M2 154.00 W FRL 2 R119-12C/M2

SHADED items indicate READY Products.

Page 34: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

Catalog 0600-FCGS-0707

Alpha-Numeric Pricing

32

R RUNIT D B PKG UNIT D B PKG

PART NUMBER PRICE D CAT Q DESCRIPTION QTY PART NUMBER PRICE D CAT Q DESCRIPTION QTY

R119-12CG/M2 166.40 W FRL 2 R119-12CG/M2RV01A1N100 17.00 W KSB R RELIEF VALVE 100 PSISA200AW57 12.90 W FSL 1 MOUNTING BRACKETSA200CW57 12.90 W FSL 1 MOUNTING BRACKET KITSA602MD/M4 31.00 W FSD 1 AUTO DRAINSA702MD 39.60 W FSD 1 AUTODRN ASYSPC200B 14.90 B AF R CHECK VLVSPC400B 21.90 B AFA R CHECK VLVSPC600B 26.70 B AF R CHECK VLVSPC800B 34.60 B AF R CHECK VLV

SPF200B 20.70 B AF R FLOW CONTSPF400B 35.10 B AF R FLOW CONTSPF600B 47.50 B AF R FLOW CONTSPF800B 63.70 B AF 5 FLOW CONTSPN200B 18.00 B AF 5 NEEDLE VLVSPN400B 23.90 B AFA R 1/4" NEEDLE VLVSPN600B 32.90 B AF R 3/8" NEEDLE VLVSPN800B 45.40 B AF R 1/2" NEEDLE VLVWDV3-G12BL 177.00 W WSY 3 DRAIN ELECWDV3-G44BL 177.00 W WSY 3 DRAIN ELEC

X51-02-000 75.60 W WSZ 3 AUTOMATIC DRAIN VALVE 1/4

SHADED items indicate READY Products.

Page 35: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Parker Hannifin CorporationPneumatic Division North AmericaRichland, Michigan

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, itssubsidiaries and its authorized distributors, are hereby offered for sale at prices to be established by Parker Hannifin Corporation,its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all ofthe following Terms and Conditions. Buyer’s order for any such item, when communicated to Parker Hannifin Corporation, itssubsidiaries or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer.

1. Terms and Conditions of Sale: All descriptions, quotations, propos-als, offers, acknowledgments, acceptances and sales of Seller’s prod-ucts are subject to and shall be governed exclusively by the terms andconditions stated herein. Buyer’s acceptance of any offer to sell is limitedto these terms and conditions. Any terms or conditions in addition to, orinconsistent with those stated herein, proposed by Buyer in any accep-tance of an offer by Seller, are hereby objected to. No such additional,different or inconsistent terms and conditions shall become part of thecontract between Buyer and Seller unless expressly accepted in writingby Seller. Seller’s acceptance of any offer to purchase by Buyer isexpressly conditional upon Buyer’s assent to all the terms and conditionsstated herein, including any terms in addition to, or inconsistent withthose contained in Buyer’s offer. Acceptance of Seller’s products shall inall events constitute such assent.

2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paidshall bear interest at the maximum rate permitted by law for each monthor portion thereof that the Buyer is late in making payment. Any claims byBuyer for omissions or shortages in a shipment shall be waived unlessSeller receives notice thereof within 30 days after Buyer’s receipt of theshipment.

3. Delivery: Unless otherwise provided on the face hereof, delivery shallbe made F.O.B. Seller’s plant. Regardless of the method of delivery,however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier.Any delivery dates shown are approximate only and Seller shall have noliability for any delays in delivery.

4. Warranty: Seller warrants that the items sold hereunder shall be freefrom defects in material or workmanship for a period of 18 months fromdate of shipment from Parker Hannifin Corporation. THIS WARRANTYCOMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TOITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WAR-RANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHAT-SOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIM-ITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE,WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OFLAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBYDISCLAIMED.

NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGN OR SPECIFICATIONS.

5. Limitation of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CON-TRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR RE-PLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASEPRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENTSHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUEN-TIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSO-EVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISINGFROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT ORITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROMBREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, ORIN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAIL-URE TO WARN OR STRICT LIABILITY.

6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as wellas the quantities and delivery dates thereof, or may request to cancel allor part of this order, however, no such requested modification or cancel-lation shall become part of the contract between Buyer and Seller unlessaccepted by Seller in a written amendment to this Agreement. Accep-tance of any such requested modification or cancellation shall be atSeller’s discretion, and shall be upon such terms and conditions as Sellermay require.

7. Special Tooling: A tooling charge may be imposed for any specialtooling, including without limitations, dies, fixtures, molds and patterns,acquired to manufacture items sold pursuant to this contract. Suchspecial tooling shall be and remain Seller’s property notwithstandingpayment of any charges by Buyer. In no event will Buyer acquire anyinterest in apparatus belonging to Seller which is utilized in the manufac-ture of the items sold hereunder, even if such apparatus has beenspecially converted or adapted for such manufacture and notwithstand-

ing any charges paid by Buyer. Unless otherwise agreed, Seller shallhave the right to alter, discard or otherwise dispose of any special toolingor other property in its sole discretion at any time.

8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer, or any otheritems which become Buyer’s property, may be considered obsolete andmay be destroyed by Seller after two (2) consecutive years have elapsedwithout Buyer placing an order for the items which are manufacturedusing such property. Seller shall not be responsible for any loss ordamage to such property while it is in Seller’s possession or control.

9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufac-ture, sale or delivery of the items sold hereunder. If any such taxes mustbe paid by Seller or if Seller is liable for the collection of such tax, theamount thereof shall be in addition to the amounts for the items sold.Buyer agrees to pay all such taxes or to reimburse Seller therefore uponreceipt of its invoice. If Buyer claims exemption from any sales, use orother tax imposed by any taxing authority, Buyer shall save Sellerharmless from and against any such tax, together with any interest orpenalties thereon which may be assessed if the items are held to betaxable.

10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks,copyrights, trade dress, trade secrets or similar rights except as providedin this Part 10. Seller will defend and indemnify Buyer against allegationsof infringement of U.S. patents, U.S. trademarks, copyrights, trade dressand trade secrets (hereinafter “Intellectual Property Rights”). Seller willdefend at its expense and will pay the cost of any settlement or damagesawarded in an action brought against Buyer based on an allegation thatan item sold pursuant to this contract infringes the Intellectual PropertyRights of a third party. Seller’s obligation to defend and indemnify Buyeris contingent on Buyer notifying Seller within ten (10) days after Buyerbecomes aware of such allegations of infringement, and Seller havingsole control over the defense of any allegations or actions including allnegotiations for settlement or compromise. If an item sold hereunder issubject to a claim that it infringes the Intellectual Property Rights of a thirdparty, Seller may, at its sole expense and option, procure for Buyer theright to continue using said item, replace or modify said item so as to makeit noninfringing, or offer to accept return of said item and return thepurchase price less a reasonable allowance for depreciation. Notwith-standing the foregoing, Seller shall have no liability for claims of infringe-ment based on information provided by Buyer, or directed to itemsdelivered hereunder for which the designs are specified in whole or partby Buyer, or infringements resulting from the modification, combinationor use in a system of any item sold hereunder. The foregoing provisionsof this Part 10 shall constitute Seller’s sole and exclusive liability andBuyer’s sole and exclusive remedy for infringement of Intellectual Prop-erty Rights.

If a claim is based on information provided by Buyer or if the design foran item delivered hereunder is specified in whole or in part by Buyer,Buyer shall defend and indemnify Seller for all costs, expenses orjudgements resulting from any claim that such item infringes any patent,trademark, copyright, trade dress, trade secret or any similar right.

11. Force Majeure: Seller does not assume the risk of and shall not beliable for delay or failure to perform any of Seller’s obligations by reasonof circumstances beyond the reasonable control of Seller (hereinafter“Events of Force Majeure”). Events of Force Majeure shall includewithout limitation, accidents, acts of God, strikes or labor disputes, acts,laws, rules or regulations of any government or government agency,fires, floods, delays or failures in delivery of carriers or suppliers,shortages of materials and any other cause beyond Seller’s control.

12. Entire Agreement/Governing Law: The terms and conditions setforth herein, together with any amendments, modifications and anydifferent terms or conditions expressly accepted by Seller in writing, shallconstitute the entire Agreement concerning the items sold, and there areno oral or other representations or agreements which pertain thereto.This Agreement shall be governed in all respects by the law of the Stateof Ohio. No actions arising out of sale of the items sold hereunder or thisAgreement may be brought by either party more than two (2) years afterthe cause of action accrues.

Offer of Sale

33

Page 36: Pneumatic Product Ordering Guide - Goodyear Rubber … · Parker Hannifin Corporation Pneumatic Division North America Richland, Michigan Catalog 0600-FCGS-0108 Introduction 2 Pneumatic

Catalog 0600-FCGS-0108 1/08 Printed in U.S.A.