Pilot Pioneer Datasheet V9 - Dingli Pioneer Expert/Pilot... · New Analysis functions are supported by Pilot Pioneer Expert including ... 2G→3G: Start test 2. 3G: ... blocked calls

Pilot Pioneer Datasheet

V9.6

Contents

Contents 1 What's New in Version 9.6 .................................................................................................... 1

2 Introduction ............................................................................................................................ 2

3 Main Features ......................................................................................................................... 3

4 New Supported Terminals .................................................................................................. 12

4.1 Samsung Note4 N9108V .......................................................................................... 12

4.2 Samsung Note4 N910G ........................................................................................... 12

4.3 Samsung S6 G9200 ................................................................................................... 12

4.4 Samsung S6 G9208 ................................................................................................... 12

4.5 Samsung G3608 ........................................................................................................ 13

4.6 Samsung G5306W .................................................................................................... 13

4.7 Samsung S4 I9506 ..................................................................................................... 13

4.8 HTC M9u ................................................................................................................... 13

What's New in Version 9.6

1 © Dingli 04-12-2015 DL196DS

1 What's New in Version 9.6 1. Manual MOS Test (PESQ & POLQA) is supported.

2. Video Stream Non-Reference (VSNR) algorithm is added for video streaming quality

measurement.

3. Force runctions are supported for WCDMA and LTE on Qualcomm chipset based

terminals

4. Data in the .ddib format can be partitioned.

5. Report Task Monitor function is added to check the progress and completion of each

statistics report task.

6. Render the background in grey to highlight the test in the Map window.

7. TCP/IP sniffer is supported during PBM service test.

8. Parameters are categorized based on QoS Class Identifier (QCI).

9. Project wizard function is added for easy configuration.

10. Online version update is added.

11. Online software bug feedback function is supported.

12. LTE Carrier Aggregation (CA) directory is added to the navigation pane to check LTE CA

information.

13. The output and display interface for Scanner test has been improved and unified for each

network technology.

14. New Analysis functions are supported by Pilot Pioneer Expert including

• Data Insight

• MO/MT Union analysis

• Delay Analysis

• Extended Coverage Analysis

• Overshooting Analysis

• Antenna Feeder Reversed Analysis

Introduction

2 © Dingli 04-12-2015 DL196DS

2 Introduction Pilot Pioneer is a leading indoor and outdoor multi-technology laptop-based diagnostic tool, for

radio network quality and services performance measurements. Based on the Windows operating

system, Pilot Pioneer is a user-friendly solution that can be used throughout network development

lifecycle, therefore allowing system vendors and network operators to benefit from their

investment.

Main Features

3 © Dingli 04-12-2015 DL196DS

3 Main Features The main features of Pilot Pioneer are as below:

Supports multiple technologies, including 2G (GSM/GPRS/EDGE, CDMAIS95/1X), 3G

(TD-SCDMA, WCDMA, CDMA2000), HSDPA/HSUPA/HSPA+ and 4G (TDD/FDD

LTE)

Supports the common commercial cellphones/data cards and scanners

Supports voice quality evaluation tests (PESQ and POLQA)

Supports multiple test services: including indoor and outdoor voice call test s for GSM,

CDMA, UMTS, TD-SCDMA, and LTE; data service test for HSDPA/HSUPA/HSPA+

and LTE; and value-added service tests for all supported network technologies

Supports VOIP, CSFB, VoLTE service tests, and KPI statistics for LTE network

technology

Supports Carrier Aggregation (CA) test

Supports Global License Server (GLS) that allows customers to better manage license

distribution and usage according to project timeline

Supports data statistics reports

Supports data statistics analysis

The following table describes the Pilot Pioneer features list:

Function

Modules Description Details

System

Overview System Environment. Based on the Windows operating system.

Data

Collection

Supports multi-network data

collection

1. GSM (GPRS/EDGE)

2. CDMA, EVDO-Rel. 0/Rev. A/Rev. B

3. WCDMA/HSDPA/HSUPA/HSPA+

4. TD-SCDMA/HSDPA/HSUPA

5. LTE

Supports data collection via

Pilot Pioneer test terminals See Terminal details.xlsx.

Supports data collection via

Scanner

1. See Terminal details.xlsx.

2. Supports multi-network, simultaneous

scanner functions.

Supports GPS data collection

1. Supports NMEA0183 protocol-based USB

GPS/Bluetooth GPS.

2. Supports R&S (Rohde & Schwarz) and

PCTEL scanners' GPS function.

Main Features

4 © Dingli 04-12-2015 DL196DS

Function


Connect test mode

Connect test mode with a single click (After

users click Connect, Pilot Pioneer will detect

the test status immediately)

Recording test mode

1. Switches test modes between Connect and

Recording.

2. Inserts tags to all devices or a single device.

3. Supports log file swap.

GIS Support

Supports digital maps

MapInfo (*.Tab,*.Mif), ibwc (*.ibwc), Terrain

(*.TMB,*.TMD), AutoCAD (*.Dxf), USGS

(*.DEM), ArcInfo (*.Shp) formats

Supports scanned maps *.bmp, *.jpg, *.gif, *.tif, and *.tga formats

Displays Google maps in

real time

1. Supports online Google map or satellite

map in real time.

2. Supports Google Earth display.

Displays Bing maps in real

time Displays online Bing maps in real time.

Supports test route display

1. Real-time parameter displays in the map

window

2. Test route displays in the map window

Positioning by longitude and

latitude

Supports orientation by longitude and latitude

and inserts tags at specific coordinates.

Supports distance

measurements

Measures the distance between any two random

points or multiple points.

Supports area measurements Measures area by square or polygon regions.

Controls base station display

on Map

1. Supports user-defined base station

information display: to display all base

station information or only display the cell

ID or name.

2. Supports user-defined base station icon,

color, and size.

Displays/searches base

station on the Map window

1. Searches and locates the base station.

2. Displays cell service information.

3. Displays neighbor cell information.

4. Displays multi-carriers information.

Cell Linking by selected

regions

Defines a map by regions (in circle, rectangle or

irregular shapes) to display cell line linking.

User-defined parameter

tracks and events

Displays user-defined parameter routes and

events simultaneously.

Displays track offset Selects any parameter to display the offset.

Main Features

5 © Dingli 04-12-2015 DL196DS

Function


Supports cell line linking,

and distinguish main serving

cell and neighbor cells with

different colors

1. Supports single-point cell line linking to

distinguish the main serving cell and

neighbor cell.

2. Customizes cell line linking color, pattern,

and thickness.

3. Customizes warning distance.

4. Supports cell line linking by region.

5. Supports cell line linking by cell.

6. Supports cell line linking by log.

Displays test information in

the floating window

1. Customizes content to be displayed in the

floating window.

2. Displays test parameter information in the

floating window.

3. Displays base station information in the

floating window.

Manages layers in the Map

window

1. Supports user-defined layer priority.

2. Shows/hides layers.

3. Customizes the legend display including

color, name, and transparency.

4. Supports layer offset.

5. Supports the label function for Map info.

6. Supports export of selected layers and test

routes

Manage neighbor cells on

the Map Window

1. Checks neighbor cells relation

2. Adds or deletes neighbor cells

3. Exports neighbor cell relationship

4. Exports neighbor cell modified records

Project

Management

Generate test plans based

on test plan template after

adding devices

1. Generates test plans based on test plan

template after adding devices, and

supports user-defined test services

Save, save as, and close

projects 2. Saves, saves as, and closes projects.

Save, open scenes 3. Saves and opens customized scenes.

Save default parameter and

window

4. Saves user-defined parameters and

windows.

Save display and test plan

configuration along with

projects

5. Saves customized window display and test

plan configuration along with project.

Re-open and reuse a project 6. Re-opens and reuses a project.

Main Features

6 © Dingli 04-12-2015 DL196DS

Function


Automatically configure a

device port

7. Supports automatic device detection.

8. Automatically configure a device port once

a device is connected to Pilot Pioneer.

Test Services

MO-MT test Supports MO-MT test (MO/MT role would

rotate).

Loop test 1. Enables customized loop test.

Voice test

1. Supports single/multiple terminal test.

2. Supports MO-MT test.

3. Supports PESQ, POLQA based voice

quality assessment test.

4. Supports mobile-to-land MOS test.

5. Controls reference file replay (including

pause and start) manually for MOS test

6. Supports multiple reference files replay

for MOS test

Data test

1. Supports Ping, PPP, FTP Upload, FTP

Download, DNSLookup, Facebook, Trace

Route, Speedtest, HTTP Download, HTTP

Page, HTTP Upload/Download, Multi FTP,

Email, etc.

2. Supports automatic file creation for FTP

Upload, HTTP Upload service test

template.

Value-added service test Supports SMS tests.

PBM service test Supports pulse-sampling bandwidth

measurement.

Video service test Supports Video Telephony and Video

Streaming tests.

Parallel test

1. Supports parallel tests for two or more

services, e.g. parallel tests of voice service

and data service.

2. Supports simultaneous tests of a single

test device with two chipsets, to achieve

simultaneous multi-network testing.

Scanner test

1. Supports Scanner data replay.

2. Supports Scanner Pilot, CW, Spectrum,

Blind, and EPS tests.

3. Supports Layer 3 message details.

LTE test Supports data test in LTE: VoLTE and CA tests.

Main Features

7 © Dingli 04-12-2015 DL196DS

Function


Time synchronization

function

Synchronizes the time between the mobile

phone and server for mobile-to-land calls (for

both PESQ and POLQA mobile-to-land call).

Packet capture function Supports packet capture in Win XP/Win 7

Force service test

1. 2G: Idle mode; 3G→2G: Stop test;

2G→3G: Start test

2. 3G: Idle mode; 4G→3G: Stop test;

3G→4G: Start test

Force test

1. Force to lock band or technology on

terminals.

2. Force cell reselection or handover.

Indoor Test

Supports indoor pin-point

tests

1. Supports user-defined pin-point test.

2. Supports predefined pin-point test.

Supports indoor maps Supports maps in the bmp, jpg, and gif formats.

Supports predefined floor

plans

1. Supports predefined floor plans.

2. Supports indoor test building management.

Users may import building information

by importing corresponding files, add

buildings and floors, and configure

building and floor information as

required.

Supports user-defined

parameters with different

coverage

Supports user-defined coverage parameters.

Supports abnormal event

display, such as dropped and

blocked calls

Supports icon display when abnormal events

occur.

Supports discrete parameter

value display

Supports discrete parameter value display (e.g.

BCCH, Cell ID, and UARFCN).

Outdoor Test

Supports GPS connection

and data collection

1. Supports real-time data collection and test

route display on the Map.

2. Supports GPS information collection via

multi-terminals based on one GPS.

3. Supports external Bluetooth GPS.

Supports base station import

1. Imports base station log files in the *.txt

format.

2. Supports automatic and manual log file

import.

3. Displays information about base station

name, sector name, PN, and scrambler.

Main Features

8 © Dingli 04-12-2015 DL196DS

Function


4. Adds a base station into base station

database.

Supports abnormal event

displays, such as blocked

call, dropped call, etc.


occur.

Supports cell line linking Supports cell line linking of the current test

point and serving cells.

Window

Display

Supports Map window

Displays the longitude and latitude of the

sampling point, testing time, and covered

distance in real time.

Supports Table window

Displays the sampling point time, longitude,

latitude, inherited value, and real value of a

parameter.

Supports default windows

1. Supports default windows: Map, Message,

Event, and Line chart windows.

2. Customizes default window in Scene

Manager.

3. Supports cell information display through a

combined serving cell and neighbor cell

window for different technologies.

Real-time air interface

signaling display

Supports real-time air interface signaling

display.

Real-time test information

display

Supports test count, completed test count, and

test time display to control testing process.

Real-time test events display

Supports real-time display of key events during

testing, such as key events during call, and dial

establishment and disconnection in data service.

Real-time abnormal events

display


occur.

Real-time statistics of

indexes such as success rate,

time delay and rate

Supports real-time statistics of parameter

samplings and key event information.

Coverage display of multiple

parameters

Supports user-defined coverage display of multi

parameters.

User-defined status windows

and charts

1. Supports user-defined status window and

chart.

2. Adds multiple charts simultaneously (a

maximum of four charts).

Supports multiple parameter

displays in line chart

1. Displays multiple charts in a line chart (a

maximum of four charts).

2. Displays multiple parameters in a chart.

Main Features

9 © Dingli 04-12-2015 DL196DS

Function


Supports event counter

1. Displays the total number of a selected

event in real time testing.

2. Displays the total number of a selected

event during log file replay.

3. Resets the event counter to zero.

Displays event flow chart

1. Supports default event flow display.

2. Supports user-defined event and messages

to be displayed in the event flow chart.

Displays the statistics

window

Drags a log file into the statistics window to

compile its statistics during data replay.

Messages and

Events

Check messages

1. Filters messages according to the L1/L2/L3

in order to filter unwanted messages.

2. Customizes message color and font.

3. Supports fuzzy message search.

4. Views message decoding information.

5. Supports synchronization of Message,

Event, and Line Chart windows.

6. Copies decoded message information.

7. Supports message history check.

8. Adds/deletes message label.

Check events

1. Supports fuzzy event search, such as block

call or dropped call.

2. Supports message history check.

3. Filters events to find out abnormal events.

4. Supports synchronization of Message,

Event, and Line Chart windows.

5. Checks abnormal events.

6. Supports abnormal event analysis.

View

Parameters

Displays parameters by

category

1. Displays parameters according to radio,

system, and timeslot.

2. Displays parameters based on network

technologies: GPRS, EDGE, HSDPA,

HSUPA, HSPA+ and LTE.

Displays parameters by user-

defined category

1. Displays user-defined parameters (such as

ReLevSub, FtpDownloadRate, CS1, CS2)

in a window.

2. Supports data synchronization of two test

terminals.

3. Customizes parameter display.

Main Features

10 © Dingli 04-12-2015 DL196DS

Function


Data Analysis

and

Processing

(Pilot Pioneer

Expert)

Log file partition

1. Supports log file partition by time.

2. Supports log file partition by port.

3. Supports log file partition by region.

4. Supports combined log file partition by

time, region and port.

Merge log files

Merges log files that are generated in different

time range and of the same device into one log

file.

Message and parameter

comparison

Supports message and parameter comparison

functions.

Analysis

1. Supports Parameters-Distance analysis.

2. Supports Parameter Quadrant analysis.

3. Supports CSFB exception analysis.

4. Supports detailed coverage information.

5. Supports Pilot Pollution Analysis

6. Supports Cell Statistics and Analysis

7. Supports Cell Coverage Analysis

8. Supports Data Insight

9. Supports MO/MT Union Analysis

10. Supports Delay Analysis

11. Supports Extended Coverage Analysis

12. Supports Overshooting Analysis

13. Supports Antenna Feeder Reversed

Analysis

Exports data

1. Exports data in the txt, csv, mdm, cti,

FMT, DTLOG, and ASPS formats.

2. Exports parameters based on the parameter

filtering.

3. Exports one or multiple messages/events

based on user-defined settings.

4. Exports layer 3 or non-layer 3 messages.

5. Exports data files by using the Python

script.

Supports statistics report and

analysis

1. Data report

2. KPI statistics report

3. Voice report

4. Scanner report

5. Special service reports, including

Benchmarking report and indoor test

statistics report

Main Features

11 © Dingli 04-12-2015 DL196DS

Function


6. Customized Reports based on custom

report templates

Data Replay

(Pilot Pioneer

Expert)

User-defined log file replay

1. Select any data to replay (decoded data and

data that has not been decoded).

2. Select scanner data to replay.

Supports forward, backward,

user-defined speed and

location replay

1. Users may replay log files forward and

backward.

2. The replay speed and replay start point can

be defined by users.

Dynamically replays all log

files

Log files can be replayed in a single or in

multiple windows.

Synchronizes log files in all

windows

1. Log files can be synchronized into multiple

windows.

2. Test log files and scanner log files can be

synchronized in time.

Supports log file

synchronization display

Supports synchronization: Click any test point

on the Map, Signaling, or Event window, and all

the information will be synchronized in all

windows.

Log file copy Copy a log file section by selecting the start

point and end point to generate a new log file.

Supports bookmark function

during data replay

Users may add bookmarks during test and data

replay.

Supports replay without

dongle

Re-decodes and replays log file while dongle is

not inserted (only parts of parameters can be

replayed).

New Supported Terminals

12 © Dingli 04-12-2015 DL196DS

4 New Supported Terminals All the new devices support "Automatic Detection" where devices can be automtically detected

and configured.

4.1 Samsung Note4 N9108V

Supported technologies and frequencies/bands:

TDD-LTE: 1900 (B39)/2300 (B40)/2600 (B38, B41)MHz

TD-SCDMA: 1880-1920/2010-2025 MHz

GSM/EDGE: 850/900/1800/ 1900 MHz

LTE category: Cat 4

4.2 Samsung Note4 N910G


FDD-LTE: B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (AWS), B5 (850 MHz), B7

(2600 MHz), B8 (900 MHz), B28 (700 MHz)

LTE TDD: B38 (2600 MHz), B40 (2300 MHz)

UMTS/HSPA+/DC-HSDPA: 850/900/1900/2100 MHz

GSM/EDGE: 850/900/1800/1900 MHz

LTE category: Cat 6

Carrier Aggregation is supported.

4.3 Samsung S6 G9200


TDD-LTE: 1900 (B39)/2300 (B40)/2600 (B38, B41) MHz

FDD-LTE: B1/B2/B3/B4/B5/B7/B8/B12/B17/B18/B20/B25/B26/B28/B29


CDMA /EVDO Rev.A: 800 MHz

TD-SCDMA: 1880-1920/2010-2025 MHz

GSM/EDGE: 850/900/1800/ 1900 MHz

LTE category: Cat 6


4.4 Samsung S6 G9208


TDD-LTE: 1900 (B39)/2300 (B40)/2600 (B38, B41)MHz


13 © Dingli 04-12-2015 DL196DS

TD-SCDMA: 1880-1920/2010-2025 MHz

GSM/EDGE: 850/900/1800/1900 MHz

LTE category: Cat 6


4.5 Samsung G3608


TDD-LTE: 1900 (B39)/2300 (B40)/2600 (B38, B41)MHz

TD-SCDMA: 2010-2025 MHz

GSM/EDGE: 850/900/1800/ 1900 MHz

LTE category: Cat 4

4.6 Samsung G5306W


TDD-LTE: 2500 (B41)

FDD-LTE: 1800 (B3)/2100 (B1) MHz


GSM/EDGE: 850/900/1800/1900 MHz

LTE category: Cat 4

4.7 Samsung S4 I9506


FDD-LTE: B1 (2100 MHz), B3 (1800 MHz), B4 (AWS), B5 (850 MHz), B7 (2600 MHz), B8

(900 MHz), B20 (800 MHz)


GSM/EDGE: 850/900/1800/ 1900 MHz

LTE category: Cat 3

4.8 HTC M9u


TDD-LTE: 2300 (B40) MHz

FDD-LTE: 850 (B5)/900 (B8)/1800 (B3)/2100 (B1) /2600 (B7) MHz


GSM/EDGE: 850/900/1800/ 1900 MHz

LTE category: Cat 6


14 © Dingli 04-12-2015 DL196DS


DINGLI CORP., LTD

Address: No.8, 5th Technology Road, Gangwan Avenue, Zhuhai, P.R. China 519085

Tel: 0756-3626100 Fax: 0756-3391900

Email: [email protected] [email protected]

Pilot Pioneer Datasheet V9 - Dingli Pioneer Expert/Pilot... · New Analysis functions are supported by Pilot Pioneer Expert including ... 2G→3G: Start test 2. 3G: ... blocked calls

Documents