Top Banner
Foreword Welcome to the growing group of value–conscious people who drive Toyotas. We are proud of the advanced engineering and quality construction of each vehicle we build. This Owner’s Manual explains the features of your new Toyota. Please read it and follow the instructions carefully so that you can enjoy many years of safe motoring. When it comes to service, remember that your Toyota dealer knows your vehicle best and is interested in your complete satisfaction. He will provide quality mainte- nance and any other assistance you may require. Please leave this Owner’s Manual in this vehicle at the time of resale. The next owner will need this information also. All information and specifications in this manual are current at the time of printing. However, because of Toyota’s policy of continual product improve- ment, we reserve the right to make changes at any time without notice. Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equipment not installed in your vehicle. TOYOTA MOTOR CORPORATION R 1996 TOYOTA MOTOR CORPORATION All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota Motor Corporation.
275
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Owners Manual

Foreword

Welcome to the growing group of value–conscious people who drive Toyotas. Weare proud of the advanced engineering and quality construction of each vehicle webuild.

This Owner’s Manual explains the features of your new Toyota. Please read it andfollow the instructions carefully so that you can enjoy many years of safe motoring.

When it comes to service, remember that your Toyota dealer knows your vehiclebest and is interested in your complete satisfaction. He will provide quality mainte-nance and any other assistance you may require.

Please leave this Owner’s Manual in this vehicle at the time of resale. The nextowner will need this information also.

All information and specifications in this manual are current at the time ofprinting. However, because of Toyota’s policy of continual product improve-ment, we reserve the right to make changes at any time without notice.

Please note that this manual applies to all models and explains all equipment,including options. Therefore, you may find some explanations for equipmentnot installed in your vehicle.

TOYOTA MOTOR CORPORATION

� 1996 TOYOTA MOTOR CORPORATION

All rights reserved. This material may not be reproduced or copied, in whole or inpart, without the written permission of Toyota Motor Corporation.

Page 2: Owners Manual

New vehicle warrantyYour new vehicle is covered by the following Toyotalimited warranties:

For further information, please refer to the separate“Owner’s Guide”, “Owner’s Manual Supplement” or“Warranty Booklet”.

� New vehicle warranty

� Emission control systems warranty

� Others

Your responsiblity for maintenance

It is the owner’s responsibility to make sure that thespecified maintenance is performed. Part 6 gives de-tails of these maintenance requirements. Also in-cluded in Part 6 is general maintenance. For sched-uled maintenance information, please refer to theseparate “Owner’s Manual Supplement/Mainte-nance Schedule”.

Accessories, spare parts andmodification of your Toyota

A wide variety of non genuine spare parts and acces-sories for Toyota vehicles are currently available inthe market. You should know that Toyota does notwarrant these products and is not responsible eitherfor their performance, repair or replacement, or forany damage they may cause to, or adverse effectthey may have on, your Toyota vehicle.

This vehicle should not be modified with non genuineToyota products. Modification with non genuine Toyo-ta products could affect its performance, safety or du-rability, and may even violate governmental regula-tions. In addition, damage or performance problemsresulting from the modification may not be coveredunder warranty.

Page 3: Owners Manual

Spark ignition system of yourToyota

The spark ignition system of your Toyota meets all re-quirements of the Canadian Interference–CausingEquipment Standard.

Installation of a mobiletwo–way radio system

As the installation of a mobile two–way radio systemin your vehicle could affect electronic systems suchas multiport fuel injection systems/sequential multi-port fuel injection system, cruise control system, anti–lock brake system and SRS airbag system, be sureto check with your Toyota dealer for precautionarymeasures or special instructions regarding installa-tion.

Scrapping of your Toyota

The SRS airbag devices in your Toyota contains ex-plosive chemicals. If the vehicle is scrapped with theairbag left as it is, it may cause an accident such asa fire. Be sure to have the SRS airbag system re-moved and disposed of by a qualified service shop orby your Toyota dealer before you dispose of your ve-hicle.

Page 4: Owners Manual
Page 5: Owners Manual

Publication No. OM14525UPart No. 01999-14525Printed in Japan 01–9607–00

Quick index

� If a service reminder indicator or warning buzzer comes on 61. . . . .

� If your vehicle will not start 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� If your engine stalls while driving 138. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� If your vehicle overheats 139. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� If you have a flat tire 140. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� If your vehicle needs to be towed 146. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� Tips for driving during break–in period 117. . . . . . . . . . . . . . . . . . . . . . . . .

� How to start the engine 129. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� General maintenance 158. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

� Complete index 203. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Gas station information

Fuel type:

Premium UNLEADAD gasoline, Research Octane Number 96 (Octane Rating 91) or higher

See page 117 for detailed information.

Fuel tank capacity:

70 L (18.5 gal., 15.4 lmp. gal.)

Engine oil:

API SH, “Energy–Conserving ll” multigrade engine oil or ILSAC multigradeengine oil is recommended.

Use SAE 5W–30 if normal temperatures are above –18�C (0�F).

See page 170 for detailed information.

Tire information: See pages 173 through 178.

Tire pressure: See page 198.

−8

I

Page 6: Owners Manual

Part 1

1

OPERATION OFINSTRUMENTSAND CONTROLS—

Chapter 1–1Overview of instrumentsand controls

� Instrument panel overview� Instrument cluster overview� Indicator symbols on the

instrument panel

Page 7: Owners Manual

2

Instrument panel overview

Page 8: Owners Manual

3

Page 9: Owners Manual

4

Instrument cluster overview

Page 10: Owners Manual

Indicator symbols on the instrument panel

5

Anti–lock brake system warning light *1

Brake system warning light *1

Seat belt reminder light*1

Discharge warning light*1

Low oil pressure warning light*1

Malfunction indicator light*1

Open door warning light*1

SRS airbag warning light*1

Traction control system off indicator/warning light*1

Slip indicator light

Snow mode indicator lightLow engine oil level warning light*1

Master warning light *1

Rear light failure warning light*1

Page 11: Owners Manual

6

Turn signal indicator lights

Headlight high beam indicator light

Cruise control indicator light *3

*1: For details, see “Service reminder indicators andwarning buzzers” in Chapter 1–5.

*2: If this light flashes, see “Automatic transmission” inChapter 1–6.

*3 If this light flashes, see “Cruise control” in Chapter 1–6.

Overdrive–off indicator light

Automatic transmission manual modeindicator light *2

Automatic transmission indicatorlights

MANU

Page 12: Owners Manual

Part 1 Keys

7

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–2Keys and Doors

� Keys� Side doors� Power windows� Back door� Hood� Theft deterrent system� Fuel tank cap� Sport roof

The master key works in every lock.The subkey will not work in the glove-box.To protect things locked in the gloveboxwhen you have your vehicle parked, leavethe subkey with the attendant.Since the side doors and back door can belocked without a key, you should alwayscarry a spare master key in case you acci-dentally lock your keys inside the vehicle.

Keep the key number plate in a safeplace such as your wallet, not in thevehicle.If you should lose your keys of if you needadditional keys, duplicates can be madeby a Toyota dealer using the key number.You should also put a copy of the keynumber with your important papers.

Page 13: Owners Manual

8

LOCKING WITH KEY

Turn the key toward the front of thevehicle to lock and towards the back tounlock.Both doors locks and unlock simulta-neously with either door. In the driver’sdoor lock, turning the key once will unlockthe driver’s door and twice in successionwill unlock both doors simultaneously.

LOCKING WITH INSIDE LOCK KNOB

Turn the lock knob forward to lock andbackward to unlock the door.Closing the door with the lock knob in thelock position will also lock the door. Becareful not to lock your keys in the vehicle.The door cannot be locked if you leave thekey in the ignition switch.

LOCKING WITH POWER DOOR LOCKSWITCHTo lock both of the doors simulta-neously, push the power door lockswitch on the LOCK side. Pushing onthe UNLOCK side will unlock them.

Side doors

Page 14: Owners Manual

9

CAUTION!Before driving, be sure that thedoors are closed and locked, espe-cially when small children are in thevehicle. A long with the proper use ofseat belts, locking the doors helpsprevent the driver and passengersfrom being thrown out from the ve-hicle during an accident. It alsohelps prevent the doors from beingopened unintentionally.

The windows can be operated with theswitch on each side door.The power windows work when the igni-tion switch is in the “‘ON‘‘ position. Howev-er, if both side doors are closed, they workfor 60 seconds even after the ignition-switchh is turned off. They stop workingwhen either side door is opened.OPERATING THE DRIVER’S WINDOW

Use the switch on the driver’s door.Normal operation: The window movesas long as you hold the switch.To open: Lightly pull down the switch.To close: Push up the switch.

Automatic operation (to open only):Pull the switch completely down and thenrelease it. The window will fully open.Tostop the window partway, lightly push theswitch up and then release it.

Power windows

Page 15: Owners Manual

10

OPERATING THE PASSENGER’S WIN-DOW

Use the switch on the passenger’sdoor. The driver’s door also has aswitch that controls the passenger’swindow.The window moves as long as you holdthe switch.To open: Pull down the switch.To close: Push up the switch.If you push in the window lock button onthe driver’s door, the passenger’s windowcannot be operated.

CAUTION!

To avoid serious personal injury, youmust do the following.� Always make sure the head,

hands and other parts of the bodyof all occupants are kept com-pletely inside the vehicle beforeyou close the power windows. Ifsomeone’s neck, head or handsgets caught in a closing window,it could result in a serious injury.When anyone closes the powerwindows, be sure that they oper-ate the windows safely.

� When small children are in the ve-hicle, never let them use the pow-er window switches without su-pervision. Use the window lockbutton to prevent them from mak-ing unexpected use of theswitches.

� Never leave small children alonein the vehicle, especially with theignition key still inserted. Theycould use the power windowswitches and get trapped in a win-dow. Unattended children can be-come involved in serious acci-dents.

Page 16: Owners Manual

11

To open the back door from the out-side, insert the key and turn it clock-wise.See ‘‘Luggage storage precautions“‘ inPart 2 for precautions to observe in load-ing luggage.To close the back door, lower it and pressdown on it. After closing the back door, trypulling it up to make sure it is securlyclosed.

Keep the back door closed whiledriving. This not only keeps the lug-gage from being thrown out but alsoprevents exhaust gases from enter-ing the vehicle.

CAUTION!

To open the back door from the driv-er’s seat, pull up on the lock release le-ver.

Back door–– ––Lock release lever

Page 17: Owners Manual

12

To open the hood, do the following.

1. Pull the hood lock release lever.The hood will spring up slightly.

2. In front of the vehicle, pull up on theauxiliary catch lever and lift thehood.

3. Hold the hood open by insertingthe support rod into the slot.

Before closing the hood, check to see thatyou have not forgotten any tools, rags,etc. and return the support rod to its clip–this prevents rattles.

After inserting the rod, make sure itsupports the hood security.

CAUTION!

Hood

Page 18: Owners Manual

13

Your Supra has two hood locks at the frontedge of the hood.To close the hood, lower the hood until itis about 30 cm (12 in.) about the enginecompartment and release it. if the hood isstill not fully closed, press down on itabove the two hood locks. Make sure thehood is locked securely.If you notice while driving that the hood isnot locked, stop the vehicle at once andclose the hood.

When closing the hood, be carefulnot to get your hands caught be-tween the hood and the vehiclebody.

CAUTION!

NOTICE

Do not press hard on the hoodexcept above the hood locks, or youmay deform the hood.

To deter the vehicle theft, the system isdesigned to give an alarm and keep theengine from being started if any of theside doors, back door or hood is forci-bly unlocked or the battery terminal isdisconnected and then reconnectedwhen the vehicle is locked.The alarm blows the horn intermittentlyand flashes the headlights, tail lights andother exterior lights. The engine cannotbe started because the starter circuit willbe cut.

Theft deterrent system

Page 19: Owners Manual

14

SETTING THE SYSTEM

1. Turn the ignition key to the “LOCK”position and remove it.

2. Have all passengers get out of the ve-hicle.

3. Close and lock all the side doors, backdoor and hood.

The indicator light will come on when allthe sidedoors, back door and hood areclosed and locked.As the side doors are locked, the system,will give you a preparation time of 30 sec-onds before the setting, during which theside doors, back door and hood may beopened to prepare for the setting.

Be careful not to use the key when open-ing any side door. This will cancel the sys-tem.4. After making sure the indicator light

starts flashing, you may leave the ve-hicle.

The system will automatically be set afterthe preparation time passes. The indica-tor light will flash to show the system isset. If any of the side doors, back door orhood is open at that time, the setting is in-terrupted until it is closed and locked.Never leave anyone in the vehicle whenyou set the system, because unlockingfrom the inside will activate the system.WHEN THE SYSTEM IS SETActivating the systemThe system will give the alarm and cut thestarter circuit under the following condi-tions:� If any of the side doors, back door or

hood is unlocked without using thekey.

� If the battery terminal is disconnectedand then reconnected

After one minute, the alarm will automati-cally stop with the starter cirucit cut kep-ton.

Reactivating the alarmOnce set, the system automatically resetsthe alarm each time all the side doors,back door and hood are closed after thealarm stops.The alarm will be activated again underthe following conditiions:� If any of the side doors, back door or

hood is opened� If the battery terminal is disconnected

and then reconnectedStopping the alarmTurn the ignition key from the “LOCK” to“ACC” position . The alarm will be stoppedwith the starter circuit cut kept on. Stop-ping the alarm in this manner will keep thealarm from being reactivated when any oftheside doors, back door or hood isopened.Interrupting the settingWhen the system set, the back door canbe opened by using the key without set-ting off the system. While the back door isopen, the setting is interrupted and theside doors and hood may be opened inaddition. However, when the battery ter-minal is disconnected and then recon-nected, the system is activated.

Page 20: Owners Manual

15

Close and lock the side doors and hood,and the system will automatically be resetafter two seconds when the back door isclosed with the key removed.CANCELLING THE SYSTEMUnlock either side door with the key.This cancels the system completely andthe starter circuit cut will be cancelled atonce.INDICATOR LIGHTThe indicator light gives the followingthree indications.FLASHING—The system is set. Youneed the key to open the side doors, backdoor and hood.ON–The system will automatically be setwhen the time comes. The side doors,back door and hood may be opened with-out a key.OFF—The system is inactive. You mayopen any door, trunk and hood.

TESTING THE SYSTEM

1. Open the windows

2. Set the system as described above.The side doors shoulkd be locked withthe key. Be sure to wait until the indica-tor light starts flashing.

3. Unlock either side door from the in–side. The system should activate thealarm

4. Cancel the system by unlocking eitherside doors with the key.

5. Repeat this operation for the otherside doors, back door and hood. When testing on the hood, also check thatthe system is activated when the bat-tery terminal is disconnected and thenreconnected.

If the system does not work properly, haveit checked by your Toyota dealer.

1. To open the fuel filler door, pull thelever up.

CAUTION!� Do not smoke, cause sparks or al-

low open flames when refuelling.The fumes are flammable.

� When opening the cap, do not re-move the cap quickly. In hotweather, fuel under pressurecould cause injury by sprayingout of the filler neck if the cap issuddenly removed.

Fuel tank cap

Page 21: Owners Manual

16

2. To remove the fuel tank cap, turnthe cap slowly counterclockwise,then pause slightly before remov-ing it. After removing the cap, hangit on the cap hanger.

It is not unusual to hear a slight swooshwhen the cap is opened. When installing,turn the cap clockwise till you hear a click.

CAUTION!� Make sure the cap is tightened se-

curely to prevent fuel spillage incase of an accident.

� Use only a genuine T oyota fuel tankcap for replacement. It has a built incheck valve to reduce fuel tank vac-uum.

Sport roof––––Detaching from vehicle

Page 22: Owners Manual

17

1. Get the tool bag out of the consolebox.

In the tool bag, you will find a special kitconsisting of:� Wrench and handle

—For turning the center lock and thefront and rear bolts

� Caps— For covering the front bolts

� Plugs—For stopping up the rear holes

2. Face the “LOOSEN” side of thehandle toward you and insert thewrench into the handle .

3. Unlock the center lock by insertingthe wrench and turning it a 1/4 turncounterclockwise.

Before detaching the sport roof from thevehicle, fully open both of the side doorsand windows, and clear the seats.

Page 23: Owners Manual

18

4. Loosen the bolts in the ordershown by turning the wrench coun-terclockwise. Then lift up the frontedge of the sport roof and lift off theroof forward.

Be careful not to get your hands orfingers caught between the sportroof and the vehicle body when de-taching the roof.

CAUTION!

NOTICE

Take care not to hit the sport roofagainst the vehicle body to avoiddamage to the roof when detachingthe roof.

5. After removing the roof, put thecaps on the front bolts and insertthe plugs into the rear holes

� Do not stick your head, arms orany objects out of the openingwhile the vehicle is moving.

� Never attempt to remove the roofwhile driving.

� Do not sit on top of the vehiclearound the opening.

CAUTION!

Page 24: Owners Manual

19

1. Open the back door and set up therear holders as shown above.

Before stowing the roof in the luggagecompartment, be sure to remove the lug-gage cover. (See “Luggage cover“ inChapter 1–8.)

2. Put in the roof from the left side asshown. Then insert the front edgeof the roof in the front holders, andengage the rear edge with the rearholders.

Put the front edge on the triangle marks ofthe front holders.To engage the rear edge of the roof withthe rear holders, put the rear edge on theholders while pushing the front edge fullyforward against the front holders.

To minimize the risk of personal in-jury, make sure all four corners ofthe roof are securely locked in theholders after installation.

CAUTION!

NOTICE

To avoid damage the roof panel, donot press on the center of thestowed roof panel and do not putanything on the stowed roof panel.

––Stowing in luggagecompartment

Page 25: Owners Manual

20

1. Lift up the rear edge while pushingthe roof fully fowward, then pull thefront edge out of the holders. Re-move the roof from the right side asshown.

After removing the roof, put back the rearholders by pulling up the lock releaseknob.

NOTICE

Do not operate the knob until theroof has been removed.

––Reinstalling on vehicle

Page 26: Owners Manual

21

2. Place the rear edge on first andthen the front edge.

Before installation, be sure to take thecaps and plugs off.

CAUTION!To minimize the risk of personal in-jury, make sure all four corners aresecurely fixed on the brackets afterinstallation.

3. Tighten the bolts and lock the cen-ter lock in the order shown. (See“–Detaching from vehicle” for de-tails.)

Note that all five connections need to betight to secure the sport roof.Reverse the wrench handle so the“TIGHTEN“ side faces toward you andturn it clockwise.Check that the roof is correctly installed bylightly trying to move the roof.Put the wrench, handle, caps and plugsback in the tool bag in the console box.

Make sure to tighten all four boltsand to lock the center lock wheninstalling the sport roof.

CAUTION!

Page 27: Owners Manual

22

Page 28: Owners Manual

Part 1 SeatsFront seats——Seat adjustment precautions

23

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–3Seats, Seat belts, Steeringwheel and Mirrors� Seats� Front seats� Fold–down rear seat� Seat heaters� Seat belts� SRS airbags� Child restraint� Tilt steering wheel� Outside rear view mirrors� Anti–glare inside rear view

mirror

While the vehicle is being driven, all ve-hicle occupants should have the seatbackupright, sit well back in the seat and prop-erly wear the seat belt provided.

CAUTION

� Do not drive with the occupantsnot properly seated such as sittingon top of a folded–down seatback,or in the luggage compartment.Persons not properly seated andnot properly restrained by seatbelts can be severely injured in theevent of emergency braking or acollision.

� During driving, do not allow pas-sengers to stand up or movearound between seats. Severe in-juries can occur in the event ofemergency braking or a collision.

!

Adjust the driver’s seat so that the footpedals, steering wheel and instrumentpanel controls are within easy reach of thedriver.

CAUTION

� Adjustments should not be madewhile the vehicle is moving, as theseat may unexpectedly move andcause the driver to lose control ofthe vehicle.

� When adjusting the seat, be carefulnot to hit the seat against a passen-ger, luggage or rear seat.

� After adjusting the seat position,try sliding it forward and backwardto make sure it is locked in posi-tion.

� After adjusting the seatback, exertbody pressure to make sure it islocked in position.

� Do not put objects under the seatsas they may interfere with the seat-lock mechanism or unexpectedlypush up the seat position adjustinglever; the seat may suddenly move,causing the driver to lose control ofthe vehicle.

!

Page 29: Owners Manual

24

� While adjusting the seat, do not putyour hands under the seat or nearthe moving parts. You may catchand injure your hands or fingers.

ADJUSTING SEAT POSITION

Pull the lock release lever up. Thenslide the seat to the desired positionwith slight body pressure and releaselever.

ADJUSTING SEATBACK ANGLE

Lean forward and pull thelock releaselever. Then lean back to the desiredangle and release the lever.

CAUTION!To reduce the risk os sliding underthe lap belt during a collision, avoidreclining the seatback any more thanneeded. The seat belts provide maxi-mum protection when the driver andthe passenger are sitting up straightand well back in the seats. If you arereclined, the lap belt may slide pastyour hips and apply restraint forcesdirectly to the abdomen. Therefore,in the event of a frontal collision, therisk of personal injury may increasewith increasing recline of the seat-back.

—Adjusting front seats(manual seat)

Page 30: Owners Manual

25

10109F22

ADJUSTING SEAT POSITION

Move the control switch to the desireddirection.Releasing the switch will stop the seat atthat position.Do not place anything under the frontseats. It might interfere with the seatmovement.ADJUSTING SEATBACK ANGLE

Move the con trol switch in the desirteddirection.Releasing the switch will stop the move inthat position.

CAUTION!To reduce the risk of sliding underthe lap belt during a collision, avoidreclining the seatback any more thanneeded. The seat belts provide maxi-mum protection when the driver andthe passenger are sitting up straightand well back in the seats. If you arereclined, the lap belt may slide pastyour hips and apply restraint forcesdirectly to the abdomen. Therefore,in the event of a formal collision, therisk of personal injury may increasewith increasing recline of the seat-back.

ADJUSTING SEAT CUSHION ANGLE

Turn the knob either way.

—Adjusting front seats(power seat)

Page 31: Owners Manual

26

Lift seatback lock release lever—theseatback will tilt forward.This allows passengers to get into or outof the rear seat easily. After passengersare in lift up on the seatback.

CAUTION!After putting back the seatback, trypushing the seatback forward andrearward to make sure it is securedin place.

For easy access to the rear seat, dothis.1. Lift the seatback lock release lever or

press the release pedal.The seat will slide forward slightly.2. Move the seat to the front–most posi-

tion.After passengers are in, lift up the seat-back and return the seat until it locks.

CAUTION!� After putting back the seat, try

pushing the seat forward and rear-ward to make sure it is secured inplace.

� Never allow anyone to rest theirfoot on the release pedal while thevehicle is moving.

—Tilting driver’s seatback forrear seat entry

—Moving passenger’s seatfor rear seat entry

Page 32: Owners Manual

27

FOLDING DOWN REAR SEAT

Unlock the seatback, and fold it down.This will enlarge the luggage compart-ment as far as the front seatbacks. See“Luggage stowage precautions” in Part 2for precautions to observe in loading lug-gage.

SETTING UP REAR SEAT

Unlock the seatback, and set it up.

CAUTION!When returning the seatback to theupright position:� Make sure the seat belts are not

twisted or caught in the seatbackand are arranged in their properposition for ready to use.

� Make sure the seatback is securelylocked by pushing forward andrearward on the top of the seat-back.

To turn on the seat heater, push the “L”switch for the driver’s seat, and “R”switch for the passenger’s seat.The key must be in the “ON” position.Once the seat is warmed up, the heat ofthe seat heater is reduced automatically.The indicator light above the switch illumi-nates when the seat heater is operating.

Fold–down rear seat Seat heaters

Page 33: Owners Manual

28

CAUTION!Use control for persons who arementioned below in the use of theseat heater because it may makethem feel too hot or cause burns atlow temperatures (erythema, vari-cella).

� Baby, small child, elderly person,sick person or handicapped per-son

� Persons who have delicate skin� Persons who are exhausted� Drunk person or those who have

taken drugs which induce sleep(sleeping drug, cold remedy, etc.)

To prevent the seat overheating, donot use the seat heater with a blan-ket, cushion, or other insulating ob-jects which cover the seat.

NOTICE

�Do not put unevenly weighed ob-jects on the seat and do not sticksharp objects (needles, nails, etc.)on the seat.

�When cleaning the seats, do notuse organic substances (paintthinner, benzine, alcohol, gaso-line, etc.). They may damage theheater and seat surface.

�To prevent the battery from beingdischarge, turn the switch onwhen the engine is running.

Toyota strongly urges that the driver andpassengers in the vehicle be properly re-strained at all times with the seat beltsprovided. Failure to do so could increasethe chance of injury and/or the severity ofinjury in accidents.Child. Use a child restraint system ap-propriate for the child until the child be-comes large enough to properly wear thevehicle’s seat belts. See “Child restraint”for details.If a child is too large for a child restraintsystem, the child should sit in the rear seatand must be restrained using the vehicle’sseat belt. According to accident statistics,the child is safer when properly restrainedin the rear seat than in the front seat.If a child must sit in the front seat, the seatbelts should be worn properly. If an acci-dent occurs and the seat belts are notworn properly, the force of the rapid infla-tion of the airbag may cause serious injuryto the child.Do not allow the child to stand up or kneelon either rear or front seats. An unre-strained child could suffer serious injuryduring emergency braking or a collision.Also, do not let the child sit on your lap. Itdoes not provide sufficient restraint.

Seat belts——Seat belt precautions

Page 34: Owners Manual

28

CAUTION!Use control for persons who arementioned below in the use of theseat heater because it may makethem feel too hot or cause burns atlow temperatures (erythema, vari-cella).

� Baby, small child, elderly person,sick person or handicapped per-son

� Persons who have delicate skin� Persons who are exhausted� Drunk person or those who have

taken drugs which induce sleep(sleeping drug, cold remedy, etc.)

To prevent the seat overheating, donot use the seat heater with a blan-ket, cushion, or other insulating ob-jects which cover the seat.

NOTICE

�Do not put unevenly weighed ob-jects on the seat and do not sticksharp objects (needles, nails, etc.)on the seat.

�When cleaning the seats, do notuse organic substances (paintthinner, benzine, alcohol, gaso-line, etc.). They may damage theheater and seat surface.

�To prevent the battery from beingdischarge, turn the switch onwhen the engine is running.

Toyota strongly urges that the driver andpassengers in the vehicle be properly re-strained at all times with the seat beltsprovided. Failure to do so could increasethe chance of injury and/or the severity ofinjury in accidents.Child. Use a child restraint system ap-propriate for the child until the child be-comes large enough to properly wear thevehicle’s seat belts. See “Child restraint”for details.If a child is too large for a child restraintsystem, the child should sit in the rear seatand must be restrained using the vehicle’sseat belt. According to accident statistics,the child is safer when properly restrainedin the rear seat than in the front seat.If a child must sit in the front seat, the seatbelts should be worn properly. If an acci-dent occurs and the seat belts are notworn properly, the force of the rapid infla-tion of the airbag may cause serious injuryto the child.Do not allow the child to stand up or kneelon either rear or front seats. An unre-strained child could suffer serious injuryduring emergency braking or a collision.Also, do not let the child sit on your lap. Itdoes not provide sufficient restraint.

Seat belts——Seat belt precautions

Page 35: Owners Manual

29

If the shoulder belt falls across the child’sneck or face, have the child sit slightlycloser to the buckle side to the seat so thatthe belt lays across the shoulder.Pregnant woman. Toyota recommendsthe use of a seat belt. Ask your doctor forspecific recommendations. The lap beltshould be worn securely and as low aspossible over the hips and not on thewaist.Injured person. Toyota recommends theuse of a seat belt. Depending on the injury,first check with your doctor for specificrecommendations.

CAUTION!Persons should ride in their seatsproperly wearing their seat beltswhenever the vehicle is moving.Otherwise, they are much more like-ly to suffer serious bodily injury inthe event of sudden braking or a col-lision.When using the seat belts, observethe following:� Use the belt for only one person at

a time. Do not use a single belt fortwo or more people—even chil-dren.

� Avoid reclining the seatbacks toomuch. The seat belts provide maxi-mum protection when the seat-backs are in the upright position.(See the seat adjustment instruc-tions.)

� Be careful not to damage the beltwebbing or hardware. Take carethat they do not get caught orpinched in the seat or doors.

� Inspect the belt system periodical-ly. Check for cuts, fraying, andloose parts. Damaged parts shouldbe replaced. Do not disassembleor modify the system

� Keep the belts clean and dry. If theyneed cleaning, use a mild soapsolution or lukewarm water. Neveruse bleach, dye, or abrasive clean-ers—they may severely weaken thebelts.

� Replace the belt assembly (includ-ing bolts) If it has been used in a se-vere impact. The entire assemblyshould be replaced even if damageis not obvious.

Adjust the seat as needed (front seatsonly) and sit up straight and well backint eh seat. To fasten your belt, pull itout of the retractor and insert the tabinto the buckle.You will hear a click when the tab locksinto the buckle.The seat belt length automatically adjuststo you size and the seat position.The retractor will lock the belt during asudden stop or on impact. It also may lockif you lean forward too quickly. A slow,easy motion will allow the belt to extend,and you can move around freely.

—Seat belts

Page 36: Owners Manual

30

If the seat belt cannot be pulled out of theretractor, firmly pull the belt and release it.You will then be able to smoothly pull thebelt out of the retractor.When a passenger’s shoulder belt is com-pletely extended and is then retractedeven slightly, the belt is locked in that posi-tion and cannot be extended. This featureis used to hold the child restraint systemsecurely. (For details, see “Child restraint”in this chapter.) To free the belt again, fullyretract the belt and then pull the belt outonce more.

CAUTION!� After inserting the tab, make sure

the tab and buckle are locked andthat the belt is not twisted.

� Do not insert coins, clips, etc. inthe buckle as this may prevent youfrom properly latching the tab andbuckle.

� If the seat belt does not functionnormally, immediately contactyour Toyota dealer.

Adjust the position of the lap andshoulder beltsPosition the lap belt as low as possible onyour hips—not your waist, then adjust it toa snug fit by pulling the shoulder portionupward through the latch plate.

CAUTION!� High–positioned lap belts and

loose–fitting belts both could in-crease the chance of injury due tosliding under the lap belt during anaccident or other unintended re-sult. Keep the lap belts as low onyour hip bone as possible.

� For your safety, do not place theshoulder belt under your arm.

Page 37: Owners Manual

31

To release the belt, press the buckle–release button and allow the belt to re-tract.If the belt does not retract smoothly, pullit out and check for kinks or twists. Thenmake sure it remains untwisted as it re-tracts.

CAUTION!For your safety, do not use the rearseat belts with the buckle in the rearseats.

If your seat belt cannot be fastened se-curely because it is not long enough, apersonalized seatbelt extender is avail-able from your Toyota dealer free ofcharge.Please contact your local Toyota dealerso that the dealer can order the proper re-quired length for the extender. Bring theheaviest coat you expect to wear for prop-er measurement and selection of length.Additional ordering information is avail-able at your Toyota dealer.

CAUTION!When using the seat belt extender,observe the following. Failure to fol-low these instructions could resultin less effectiveness of the seat beltrestraint system in case of vehicleaccident, increasing the chance ofpersonal injury.� Never use the seat belt extender if

you can fasten the seat belt with-out it.

—Seat belt extender

Page 38: Owners Manual

32

� Remember that the extender pro-vided for your may not be safewhen used on a different vehicle,or for another person or at a differ-ent seating position than the oneoriginally intended for.

To connect the extender to the seatbelt, insert the tab into the seat beltbuckle so that the “PRESS” signs onthe buckle–release buttons of the ex-tender and the seat belt are both facingoutward as shown.You will hear a click when the tab locksinto the buckle.When releasing the seat belt, press on thebuckle–release button on the extender,not on the seat belt. This helps preventdamage to the vehicle interior and extend-er itself.When not in use, remove the extenderand store in the vehicle for future use.

� After inserting the tab, make surethe tab and buckle are locked andthat the seat belt extender is nottwisted.

� Do not insert coins, clips, etc. in thebuckle as this may prevent youfrom properly latching the tab andbuckle.

� If the seat belt does not functionnormally, immediately contact yourToyota dealer.

CAUTION!

Page 39: Owners Manual

33

The SRS (Supplemental Restraint Sys-tem) airbags are designed to providefurther protection to the driver andfront passenger when added to the pri-mary protection provided by the seatbelts.In response to a severe frontal impact, theSRS airbags work together with the seatbelts to help preventing or reduce injury byinflating, in order to decrease the likeli-hood of the driver’s or front passenger’shead or chest directly hitting the steeringwheel or dashboard. The passenger air-bag is activated even with no passengerin the front seat.

This indicator comes on when theignition key is turned to the “ACC” or“ON” position. It goes off after about 6seconds. This means the SRS airbagsare operating properly.The SRS airbag warning light systemmonitors the airbag sensor assembly, in-flators, warning light, interconnecting wir-ing and power sources.

The SRS airbag system is designed toactivate in response to a severe frontalimpact within the shaded area be-tween the arrows in the illustration.The SRS airbags will deploy if the severityof the impact is above the designedthreshold level, comparable to an approxi-mate 20 km/h (14 mph) collision when im-pacting straight into a fixed barrier thatdoes not move or deform.If the severity of the impact is below theabove threshold level, the SRS airbagsmay not deploy.

SRS airbags

Page 40: Owners Manual

34

However, this threshold velocity will beconsiderably higher if the vehicle strikesan object, such as a parked vehicle or signpole, which can move or deform on im-pact, or if it is involved in an underride col-lision (e.g. a collision in which the nose ofthe vehicle “underrides”, or goes under,the bed of a truck.It is possible with collision severity at themarginal level of airbag sensor detectionand activation that only one of your ve-hicle’s two airbags will deploy.For the safety of all occupants, be sure toalways wear seat belts. The SRS airbags are not designed to

inflate if the vehicle is subjected to aside or rear impact, if it rolls over, or ifit is involved in a low–speed frontalcollision.

The airbag sensor assembly consists of asafing sensor and airbag sensor.In a severe frontal impact, sensors detectdeceleration and the system triggers theairbag inflators. Then a chemical reactionin the inflators momentarily fills the air-bags with non–toxic nitrogen gas to helprestrain the forward motion of the occu-pants.

Page 41: Owners Manual

35

When the airbags inflate, they produce afairly loud noise and release some smokealong with the nitrogen or argon gas. Thisis not harmful and does not indicate a fire.Be sure to wash off any residue as soonas possible to prevent minor skin irritation.Deployment of the airbags happen in afraction of a second, so the airbags mustinflate with considerable force. While thesystem is designed to reduce serious inju-ries, it may also cause minor burns orabrasions and swellings.Parts of the airbag module (steeringwheel hub, dashboard) may be hot forseveral minutes, but the airbags them-selves will not be hot. The airbags are de-signed to inflate only once.A crash severe enough to inflate the air-bags may break the windshield as the ve-hicle buckles. In vehicles with a passen-ger airbag the windshield may also bedamaged by absorbing some of the forceof the inflating airbag.

CAUTION!� The SRS airbag system is de-

signed only as a supplement tothe primary protection of the driv-er side and front passenger sideseat belt systems. The front seatoccupants are particularly sus-ceptible to injury if they do notwear their seat belts; when suddenbraking or a collision occurs, theymay be thrown forward. To obtainmaximum protection in an acci-dent, the driver and all passen-gers in the vehicle should alwayswear their seat belts when drivingbecause serious injuries can re-sult to unrestrained occupants.For instructions and precautionsconcerning the seat belt systems,see “Seat belts” in this chapter.

� A baby or small child who is toosmall to use a seat belt should beproperly secured in a rear seatusing a child restraint system.

� Never put a rear–facing child re-straint system in the front seat be-cause the force of the rapid infla-tion of the passenger airbag cancause severe injury to the child.Vehicles with a passenger airbagdisplay a caution label on the pas-senger side instrument panel asshown above to remind you not toinstall a rear–facing child re-straint system on the front seat.

Page 42: Owners Manual

36

� If you must use a forward–facingchild restraint system in the frontseat, the seat must be moved as farback as possible. For instructionsconcerning the installation of achild restraint system, see “Childrestraint” in this chapter.

� Do not sit on the edge of the seat orlean over the dashboard when thevehicle is in use. The airbags in-flate with considerable speed andforce; you may be severely injured.Sit up straight and well back in theseat, and always use your seat belt.

� Do not allow a child to stand up, orto kneel on the front passengerseat. The airbag inflates with con-siderable speed and force; thechild may be severely injured.

� Do not hold a child on your lap orin your arms. Use a child restraintsystem in the rear seat. For instruc-tions concerning the installation ofa child restraint system, see “Childrestraint” in this chapter.

Page 43: Owners Manual

37

� Do not put objects on or in front ofthe dashboard or steering wheelpad that houses the airbag system.They might restrict inflation orcause pesonal injury as they areprojected rearward.

� Do not modify, remove or open anycomponents or wiring, such as thesteering wheel column cover, frontpassenger airbag cover, front pas-senger airbag, airbag sensor as-sembly. Doing any of these maycause sudden SRS airbag inflationor disable the system, which couldresult in personal injury.

Failure to follow these instructionscan result in death or serious inju-ries.

Do not perform any of the followingchanges without consulting yourToyota dealer. Such changes caninterfere with proper operation ofthe SRS airbag system in somecases.�Installation of electronic items

such as a mobile two–way radio,cassette tape player or compactdisc player

�Modification of the suspensionsystem

�Modification of the front endstructure

�Attachment of a grille guard (bullbar, kangaroo bar, etc.), snow-plow, winches or any other equip-ment to the front end

�Repairs made on or near the frontend structure, console, steeringcolumn, steering wheel or dash-board near the front passengerairbag

NOTICE

This SRS airbag system has a service re-minder indicator to inform the driver of op-erating problems. If either of the followingconditions occurs, this indicates a mal-function of the airbags. Contact your To-yota dealer as soon as possible to servicethe vehicle.� The light does not come on when the

ignition key is turned to the “ACC” or“ON” position, or remains on.

� The light comes on while driving.

Page 44: Owners Manual

38

In the following cases, contact yourToyota dealer as soon as possible:� The SRS airbags have been inflated.� The front part of the vehicle (shaded in

the illustration) was involved in an ac-cident not of the extent to cause theSRS airbags to inflate

� The pad section of the steering wheelor front passenger airbag cover(shaded in the illustration) isscratched, cracked, or otherwisedamaged.

Toyota strongly urges the use of childrestraint systems for children smallenough to use them.The laws of all fifty states in the U.S.A.and Canada now require the use of a childrestraint system.Your vehicle conforms to SAEJ1819.If a child is too large for a child restraintsystem, the child should sit in the rear seatand must be restrained using the vehicle’sseat belt. See “Seat belts” for details.

CAUTION!� For effective protection in automo-

bile accidents and sudden stops,children must be properly re-strained using a seat belt or childrestraint system depending on theage and size of the child. Holdinga child in your arms is not a substi-tute for a child restraint system. Inan accident, the child can becrushed against the windshield, orbetween you and the vehicle’s in-terior.

� Toyota strongly urges use of aproper child restraint systemwhich conforms to the size of thechild and is put on the rear seat. Ac-cording to accident statistics, thechild is safer when properly re-strained in the rear seat than in thefront seat.

� Never install a rear–facing child re-straint system on the front seat. Inthe event of an accident, the forceof the rapid inflation of the airbagcan cause severe if a rear–facingchild restraint system is put on thefront seat.

� Unless it is unavoidable, do not puta forward–facing child restraintsystem on the front seat.

� If you must install a forward–facingchild restraint system on the frontseat, move the seat as far back aspossible.

� Make sure that you have compliedwith all installation instructionsprovided by the child restraintmanufacturer and that the systemis properly secured.

Child restraint——Child restraint precautions

Page 45: Owners Manual

38

In the following cases, contact yourToyota dealer as soon as possible:� The SRS airbags have been inflated.� The front part of the vehicle (shaded in

the illustration) was involved in an ac-cident not of the extent to cause theSRS airbags to inflate

� The pad section of the steering wheelor front passenger airbag cover(shaded in the illustration) isscratched, cracked, or otherwisedamaged.

Toyota strongly urges the use of childrestraint systems for children smallenough to use them.The laws of all fifty states in the U.S.A.and Canada now require the use of a childrestraint system.Your vehicle conforms to SAEJ1819.If a child is too large for a child restraintsystem, the child should sit in the rear seatand must be restrained using the vehicle’sseat belt. See “Seat belts” for details.

CAUTION!� For effective protection in automo-

bile accidents and sudden stops,children must be properly re-strained using a seat belt or childrestraint system depending on theage and size of the child. Holdinga child in your arms is not a substi-tute for a child restraint system. Inan accident, the child can becrushed against the windshield, orbetween you and the vehicle’s in-terior.

� Toyota strongly urges use of aproper child restraint systemwhich conforms to the size of thechild and is put on the rear seat.According to accident statistics,the child is safer when properly re-strained in the rear seat than in thefront seat.

� Never install a rear–facing child re-straint system on the front seat. Inthe event of an accident, the forceof the rapid inflation of the airbagcan cause severe if a rear–facingchild restraint system is put on thefront seat.

� Unless it is unavoidable, do not puta forward–facing child restraintsystem on the front seat.

� If you must install a forward–facingchild restraint system on the frontseat, move the seat as far back aspossible.

� Make sure that you have compliedwith all installation instructionsprovided by the child restraintmanufacturer and that the systemis properly secured.

Child restraint——Child restraint precautions

Page 46: Owners Manual

39

A child restraint system for a smallchild or baby must itself be properlyrestrained on the seat with either thelap belt or the lap portion of the lap/shoulder belt. You must carefully con-sult the manufacturer’s instructionswhich accompany your child restraintsystem.To provide proper restraint, use a child re-straint system following the manufactur-er’s instructions about the appropriateage and size of the child for the child re-straint system.Install the child restraint system correctlyfollowing the instructions provided by itsmanufacturer of the system.Toyota recommends installing the childrestraint system on the rear seat. Accord-ing to accident statistics, the child is saferwhen properly restrained in the rear seatthan in the front seat.

CAUTION!� Never install a rear–facing child re-

straint system on the front seat. Inthe event of an accident, the forceof the rapid inflation of the airbagcan cause death or serious injuryif a rear–facing child restraint sys-tem is installed on the front seat.

� Unless it is unavoidable, do notinstall a forward–facing child re-straint system on the front seat.

� If you must install a forward–fac-ing child restraint system on thefront seat, move the seat as farback as possible.

� After installing the child restraintsystem, make sure it is secured inplace following the manufactur-er’s instructions. If it is not re-strained securely, it may cause in-jury to the child in the event of asudden stop or accident.

When not using the child restraint system,keep it secured with the seat belt. This willprevent it injuring passengers in the eventof a sudden stop or accident.Your vehicle has anchors for securing thetop strap of a child restraint system. Theanchor nuts are welded beneath the sheetmetal to permit installation of an anchorbracket for a child restraint system.To install an anchor bracket, use an 8 mmX 30 mm X 1.25 mm coarse thread metricbolt and 15mm (0.6 in.) spacer. Note thatthe bolts accompanying many child re-straint systems are not metric. You candamage the anchor nuts on our vehicle ifyou force bolts with different thread intothe anchor nuts.For instructions about how to install theanchor bracket, see “Top strap anchorsand locations.”If your child restraint system does not pro-vide any of the necessary parts, you canpurchase the following items from yourToyota dealer.* CRS installation kit

(Part No. 04731–22012)—contains 1bolt, 3 types of spacers and 1 lockingclip.

* Bolt (Part No. 91511–60830)

—Child restraint system

Page 47: Owners Manual

40

Child restraint systems are classified intothe following 3 types depending on thechild’s age and size.(A) Infant seat(B)Convertible seat(C)Booster seatInstall the child restraint system followingthe instructions provided by its manufac-turer.

—Types of child restraint system

Page 48: Owners Manual

41

(A)INFANT SEAT INSTALLATION

An Infant seat is used in rear–facingonly.

CAUTION!

� Never use rear–facing child re-straint system in the front seat be-cause the force of the rapid infla-tion of the passenger airbag cancause severe injury to the child. Ve-hicle with a passenger airbag dis-play a caution label on the passen-ger side instrument panel as shownabove to remind you not to install arear–facing child restraint systemon the front seat.

� Do not use a rear–facing child re-straint system in the rear seat if itinterferes with the lock mechanismof the front seats. This can causesevere injury to the child and frontpassenger in case of sudden brak-ing or a collision.

—Installation with 3–pointtype seat belt

Page 49: Owners Manual

42

1. Run the lap and shoulder belt throughor around the infant seat following theinstructions provided by its manufac-turer and insert the tab into the buckletaking care not to twist the belt. Keepthe lap portion of the belt tight.

CAUTION!� After inserting the tab, make sure

the tab and buckle are locked andthat the lap and shoulder portionsof the belt is not twisted.

� Do not insert coins, clips, etc. inthe buckle as this may prevent youfrom properly latching the tab andbuckle.

� If the seat belt does not functionnormally, it cannot protect yourchild from injury. Contact your To-yota dealer immediately. Do notuse the seat until the seat belt isfixed.

2. Fully extend the shoulder belt to put itin the lock mode. When the belt is thenretracted even slightly, it cannot be ex-tended.

To hold the infant seat securely, makesure the belt is in the lock mode before let-ting the before letting the belt to retract.

Page 50: Owners Manual

43

3. While pressing the infant seat firmlyagainst the seat cushion and seat-back, let the shoulder belt retract as faras it will go to hold the infant seat se-curely.

CAUTION!Make sure the seat belt is securelylocked. Also make sure the child re-straint system is secure by pushingand pulling it in different directions.Follow all the installation instruc-tions provided by its manufacturer.

4. To remove the infant seat, press thebuckle–release button and allow thebelt to retract completely. The belt willmove freely again and be ready towork for an adult or older child passen-ger.

Page 51: Owners Manual

44

(B)CONVERTIBLE SEAT INSTALLA-TION

A convertible seats is used in forward–facing and rear–facing depending onthe child’s age and size. When instal-ling, follow the manufacturer’s in-struction about the applicable child’sage and size.

CAUTION!� Never use a rear–facing child re-

straint system in the front seat be-cause the force of the rapid infla-tion of the passenger airbag cancause severe injury to the child. Ve-hicles with a passenger airbag dis-play a caution label on the passen-ger side instrument panel as shownabove to remind you not to install arear–facing child restraint systemon the front seat.

� Only when it is unavoidable shoulda forward–facing child restraintsystem be used on the front seat.Always move the seat as far back aspossible because the force of de-ploying airbag would cause seri-ous injury to the child.

Page 52: Owners Manual

45

� Do not use a rear–facing child re-straint system in the rear seat if itinterferes with the lock mecha-nism of the front seats. This cancause severe injury to the childand front passenger in case ofsudden braking or a collision.

1. Run the lap and shoulder belt throughor around the convertible seat follow-ing the instructions provided by itsmanufacturer and insert the tab intothe buckle taking care not to twist thebelt. Keep the lap portion of the belttight.

CAUTION!� After inserting the tab, make sure

the tab and buckle are locked andthat the lap and shoulder portionsof the belt is not twisted.

� Do not insert coins, clips, etc. inthe buckle as this may prevent youfrom properly latching the tab andbuckle.

� If the seat belt does not functionnormally, it cannot protect yourchild from injury. Contact your To-yota dealer immediately. Do notuse the seat until the seat belt isfixed.

Page 53: Owners Manual

46

2. Fully extend the shoulder belt to put itin the lock mode. When the belt is thenretracted even slightly, it cannot be ex-tended.

To hold the convertible seat securely,make sure the belt is in the lock mode be-fore letting the belt to retract.

3. While pressing the convertible seatfirmly against the seat cushion andseatback, let the shoulder belt retractas far as it will go to hold the convert-ible seat securely.

CAUTION!Make sure the seat belt is securelylocked. Also make sure the child re-straint system is secure by pushingand pulling it in different directions.Follow all the installation instruc-tions provided by its manufacturer.

Page 54: Owners Manual

47

4. To remove the convertible seat, pressthe buckle–release button and allowthe belt to retract completely. The beltwill move freely again and be ready towork for an adult or older child passen-ger.

(C)BOOSTER SEAT INSTALLATIONA booster seat is used in forward–fac-ing only.

Only when it is unavoidable shoulda forward–facing child restraint sys-tem be used on the front seat. Al-ways move the seat as far back aspossible because the force of de-ploying airbag would cause seriousinjury to the child.

CAUTION!

Page 55: Owners Manual

48

1. Sit the child on a booster seat. Run thelap and shoulder belt through oraround the booster seat and child fol-lowing the instructions provided by itsmanufacturer and insert the tab intothe buckle taking care not to twist thebelt.

Make sure the shoulder belt is correctlyacross the child’s shoulder and that thelap belt is positioned as low as possible onchild’s hips. See “Seat belts” for details.

CAUTION!� Always make sure the shoulder belt

is positioned across the center ofchild’s shoulder. The belt shouldbe kept away from child’s neck, butnot falling off child’s shoulder. Fail-ure to do so could reduce theamount of protection in an accidentand increase the chance of injury.

� High–positioned lap belts andloose–fitting belts both could in-crease the chance of injury due tosliding under the lap belt during anaccident. Keep the lap belt as lowon your hip bone as possible.

� For the safety, do not place theshoulder belt under child’s arm.

� After inserting the tab, make surethe tab and buckle are locked andthat the lap and shoulder portionsof the belt is not twisted.

� Do not insert coins, clips, etc. in thebuckle as this may prevent youfrom properly latching the tab andbuckle.

� If the seat belt does not functionnormally, it cannot protect yourchild from injury. Contact yourToyota dealer immediately. Do notuse the seat until the seat belt isfixed.

Page 56: Owners Manual

49

2. To remove the child restraint system,press the buckle–release button andallow the belt to retract.

If your child restraint system requiresthe use of a top strap, latch the hoodonto the anchor bracket and tightenthe top strap.Twist the top strap half a turn: make a twistat front top of the rear seatback, not be-hind it. Then pass the top strap throughthe cutout in the carpet on the rear cargofloor.See the following instructions to install theanchor bracket.

On the rear cargo floora. Roll back the carpet on the rear cargofloor to find the anchor location you wishto use.b. Insert a 5 mm (0.5 in.) spacer andtighten down the anchor bracket for youchild restraint system with a bolt. Torquethe bolt to 16.5—24.7 N⋅m (1.68—2.52kgf⋅m, 12.2—18.2 ft⋅lb.).To make a cutout for the top strap pas-sage, push open the carpet along the per-foration with finger pressure. (The perfo-ration can easily be seen from the backside of the carpet.)

—Top strap anchors andlocations

Page 57: Owners Manual

50

d. After installing the anchor, put the car-pet back in place.To comply with Canada Motor VehicleSafety Standards, vehicles sold in Cana-da are provided with a bracket set in theglovebox, designed for use with any of the3 anchor locations shown in the illustra-tion.If your child restraint system does not pro-vide any of the necessary parts, ask youToyota dealer. (See “—Child restraint sys-tem.”)

To change the steering wheel angle,hold the steering wheel, pull up thelock release lever, tilt the steeringwheel to the desired angle and releasethe lever.When the steering wheel is in a low posi-tion, it will spring up as you release thelock release lever.

CAUTION!� Do not adjust the steering wheel

while the vehicle is moving.� After adjusting the steering wheel,

try moving it up and down to makesure it is locked in position.

Adjust the mirror so you can just seethe side of your vehicle in the mirror.Be careful when judging the size or dis-tance of any object seen in the outsiderear view mirror on the passenger’s side.It is a convex mirror with a curved surface.Any object seen in a convex mirror willlook smaller and farther away than whenseen in a flat mirror.

Tilt steering wheel Outside rear view mirrors—

Page 58: Owners Manual

50

d. After installing the anchor, put the car-pet back in place.To comply with Canada Motor VehicleSafety Standards, vehicles sold in Cana-da are provided with a bracket set in theglovebox, designed for use with any of the3 anchor locations shown in the illustra-tion.If your child restraint system does not pro-vide any of the necessary parts, ask youToyota dealer. (See “—Child restraint sys-tem.”)

To change the steering wheel angle,hold the steering wheel, pull up thelock release lever, tilt the steeringwheel to the desired angle and releasethe lever.When the steering wheel is in a low posi-tion, it will spring up as you release thelock release lever.

CAUTION!� Do not adjust the steering wheel

while the vehicle is moving.� After adjusting the steering wheel,

try moving it up and down to makesure it is locked in position.

Adjust the mirror so you can just seethe side of your vehicle in the mirror.Be careful when judging the size or dis-tance of any object seen in the outsiderear view mirror on the passenger’s side.It is a convex mirror with a curved surface.Any object seen in a convex mirror willlook smaller and farther away than whenseen in a flat mirror.

Tilt steering wheel Outside rear view mirrors—

Page 59: Owners Manual

51

To adjust a power rear view mirror, firstplace the master switch at “L” (left) or“R” (right) depending on which mirrorneeds adjusting, then push the con-trol switch in the desired direction.If the engine is not running, the key mustbe in the “ACC” position.

NOTICE

If ice should jam the mirror, do notoperate the control or scrape themirror ice. Use a spray de–icer tofree the mirror.

To fold the rear view mirror, push back-ward.The rear view mirrors can be folded back-ward for parking in restricted areas.

Pull the lever toward you to reduceglare from the headlights of the ve-hicle behind you during night driving.Before adjusting the mirror to the positionwith most clarity, push the day–nightchange lever away from you (daylightdriving position).Remember that by reducing glare youalso lose some rear view clarity.

—Power rear view mirrorcontrol

Anti–glare inside rear viewmirror—Folding rear view mirrors

Page 60: Owners Manual

52

Page 61: Owners Manual

Part 1 Headlights and turn signals

53

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–4Lights, Wipers andDefogger� Headlights and turn signals� Emergency flashers� Instrument panel light control� Front fog lights� Interior lights� Ignition switch light� Luggage compartment light� Windshield wipers and washer� Rear window wiper and washer� Rear window and outside rear

view mirror defoggers

To turn the lights on, twist the knob onthe end of the lever.Daytime running light system (Canadaonly)—The headlights turn on when theparking brake is released with the enginestarted, even with the light switch in the“OFF” position. They will not go off untilthe ignition switch is turned off.The turn on the other exterior lights and in-strument panel lights, twist the knob to thefirst clickstop.Under the daytime running light system,the headlights turn on at reduced intensi-ty. Twist the knob to the second clickstopto turn to full intensity for driving at night.

FIRST CLICKSTOP: Only the parking,tail, license plate, side marker and instru-ment panel lights turn on.SECOND CLICKSTOP: The headlightsalso turn on.The lights automatically turn off when thedriver’s door is opened with the ignitionkey turned off. To turn them on again, turnthe key to the “ON” position or actuate theheadlight switch. If you are going to parkfor over one week, make sure the head-light switch is off.

NOTICE

To prevent the battery from beingdischarged, do not leave the lightson for a long period when theengine is not running.

Page 62: Owners Manual

54

For high beam, push the lever awayfrom you. Pull it toward you for lowbeam. For the headlight flasher, pull itfurther back.A blue light in the instrument panel indi-cates high beam is on.The headlight flasher works even whenthe headlight switch is off.

For signaling turns, move the lever upor down in the conventional manner.The key must be in the “ON” position.The turn signal is self–cancelling after aturn, but after a lane change, you mayhave to cancel it by hand. You can alsosignal a lane change by moving the turnsignal lever partway and holding it there.If the green light in the instrument panelflashes faster than normal, it indicatesthat the front or rear turn signal bulb hasburned out.

To turn on the emergency flashers,push the switch.All the turn signal lights will flash.Turn on the emergency flashers to warnother drivers if your vehicle must bestopped where it might be a traffic hazard.Always pull as far off the road as possible.The turn signal light switch will not workwhen the emergency flashers are operat-ing.

Emergency flashers

Page 63: Owners Manual

55

NOTICE

To prevent the battery from beingdischarged, do not leave the lightson for a long period when the engineis not running.

To adjust the brightness of the instru-ment panel lights, turn the knob.

To turn on the front fog lights, twist theknob of the headlight and turn signalswitch lever. They will come on whenthe headlights are turned on lowbeam.

Instrument panel light control Front fog lights

Page 64: Owners Manual

56

To turn on the interior light, slide theswitch.With the central switch pushed on the“DOOR” side, both lights come on wheneither of the side doors is opened. Thelights remain on for a certain time afterboth doors are closed.

For easy access to the ignition switch,the ignition switch light comes onwhen either side door is opened.The light remains on for a certain time af-ter both side doors are closed.

To turn the luggage compartment lighton, open the back door and push theswitch. Closing the back door will turnthe light off.

Interior lights Ignition switch light Luggage compartment light

Page 65: Owners Manual

57

To turn the wipers on, move the lever.To make the washer squirt, push thebutton on the end of the lever.The key must be in the “ON” position.The wipers will operate at intervals whenthe lever is in the “INT” position. With thelever in this position, the wipers can be ad-justed to operate at intervals of 3 to 12 se-conds depending on the interval adjustersetting between “S” and “F”.If a single wipe is desired in mist, pull thelever toward you and release it.Also, the wipers will automatically operatea couple of times after the washer squirtseven with the lever in the “OFF” position.

If the washer does not work, check to seewhether the washer tank is empty. For in-formation on adding washer fluid, see“Adding washer fluid” in Chapter 7–3.In cold weather, warm the windshield withthe defroster before using the washer.This will help prevent icing, which couldblock your vision.

NOTICE

Do not operate the wipers if thewindshield is dry. It may scratch theglass.

To turn the rear wiper and washer on,twist the knob at the end of the lever.The key must be in the “ON” position.The wiper will operate at intervals whenthe knob is in the “INT” position.The washer squirts at the two markedknob positions. The knob will automatical-ly return from these positions when it is re-leased.If the washer does not work, check to seewhether the washer tank is empty. For in-formation on adding washer fluid, see“Adding washer fluid” in Chapter 7–3.

Windshield wipers and washerRear window wiper andwasher

Page 66: Owners Manual

58

NOTICE

Do not operate the wipers if thewindshield is dry. It may scratch theglass.

To defog or defrost the rear window,push the switch.The key must be in the “ON” position.The thin heater wires on the inside of therear window will quickly clear the windowsurface. An indicator light will illuminate toindicate the defogger is operating.On some models, the heater panels in theoutside rear view mirrors will also quicklyclear the surfaces. Keep you hands off themirror faces when the switch is on.Push the switch once again to turn the de-fogger off.The system will automatically shut off af-ter the defoggers have operated about 15minutes.

Make sure you turn the defoggers offwhen the surfaces are clear. Leaving thedefoggers on for a long time could causethe battery to discharge, especially duringstop–and–go driving. The defoggers arenot designed for drying rain water or formelting snow.If the outside rear view mirrors are heavilycoated with ice, use a spray de–icer be-fore operating the switch.

NOTICE

When cleaning the inside of the rearwindow, be careful not to scratch ordamage the heater wires.

Rear window and outsiderear view mirror defoggers

Page 67: Owners Manual

Part 1 Fuel gauge

59

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–5Gauges, Metersand Service reminderindicators� Fuel gauge� Engine coolant temperature

gauge� Tachometer� Odometer and two trip meters� Service reminder indicators

and warning buzzers

The gauge works when the ignitionswitch is on and indicates the approxi-mate quantity of fuel remaining in thetank.It is a good idea to keep the tank over 1/4full.This fuel gauge has a non–return typeneedle which remains at the last indicatedposition when the ignition switch is turnedoff.If the level approaches “E” or the low fuellevel warning light comes on, fill the fueltank as soon as possible.If the fuel tank is completely empty, themalfunction indicator lamp comes on. Fillthe fuel tank immediately.

The indicator lamp goes off after drivingseveral times. If the indicator lamp doesnot go off, contact your Toyota dealer assoon as possible.

Page 68: Owners Manual

60

The gauge indicates the engine cool-ant temperature when the ignitionswitch is on. The engine operatingtemperature will vary with changes inweather and engine load.If the needle points to the red zone or high-er, stop your vehicle and allow the engineto cool.Your vehicle may overheat during severeoperating conditions, such as:� Driving up a long hill on a hot day.� Reducing speed or stopping after high

speed driving.� Idling for a long period with the air con-

ditioning on in stop–and–go traffic.

NOTICE

�Do not remove the thermostat inthe engine cooling system as thismay cause the engine to overheat.The thermostat is designed tocontrol the flow of coolant to keepthe temperature of the enginewithin the specified operatingrange.

�Do not continue driving with anoverheated engine. See “If yourvehicle overheats” in Part 4.

The tachometer indicates enginespeed in thousands of rpm (revolu-tions per minute). Use it while drivingto select correct shift points and toprevent engine lugging and overrev-ving.Driving with the engine running too fastcauses excessive engine wear and poorfuel economy. Remember, in most casesthe slower the engine speed, the greaterthe fuel economy.

NOTICE

Do not let the indicator needle getinto the red zone. This may causesevere engine damage.

TachometerEngine coolant temperaturegauge

Page 69: Owners Manual

61

This meter displays the odometer andtwo trip meters. To change the odome-ter display to the trip meter display,push the “ODO TRIP” button. To resetthe trip meter A to zero, display the me-ter A reading, then push the “RESET”button. The same applies for the tripmeter B.The odometer records the total distancethe vehicle has been driven. The trip me-ters can record two different distances in-dependently.You can use one trip meter to calculate thefuel economy and the other to measurethe distance on each trip. All trip meterdata is cancelled if the electrical powersource is disconnected.

The meter display changes each time youpush the “ODO TRIP” button, changing inorder from the odomerter to rip meter A totrip meter B, then back to the odometer.

Odometer and two trip metersService reminder indicatorsand warning buzzers

Page 70: Owners Manual

62

(a) Master Warning LightThis light warns that another service re-minder indicator (except seat belt remind-er light, low fuel level warning lights, rearlight failure warning light, SRS airbagwarning light and “TRAC OFF” indicator/warning light) is on.If it comes on while you are driving, checkthe other service reminder indicator that ison with reference to the following descrip-tion of the indicator.(b) Brake System Warning LightThis light has the following functions:Parking brake reminderIf this light is on, make sure the parkingbrake is fully released. The light should gooff.Low brake fluid level warningIf this light comes on and stays on whileyou are driving, slow down and pull off theroad. Then stop the vehicle carefully.There maybe a problem somewhere inthe brake system. Check the fluid level ofthe see–through reservoir.To make sure the parking brake has notcaused the warning light to come on,check to see that the parking brake is fullyreleased.

Page 71: Owners Manual

63

If the brake fluid level is low...At a safe place, test your brakes by start-ing and stopping.� If you judge that the brakes still work

adequately, drive cautiously to yournearest dealer or shop for repairs.

� If the brakes are not working, have thevehicle towed in for repairs. (For tow-ing information, see Part 4.)

It is dangerous to continue drivingnormally when the brake fluid levelis low.

CAUTION!

If the brake fluid level is correct...Have the warning system checked byyour Toyota dealer.(c) Seat Belt Reminder Light and Buzz-

erOnce the ignition key is turned to “ON” or“START”, the reminder light and buzzercome on if the driver’s seat belt is not fas-tened. Unless the driver fastens the belt,the light stays on and the buzzer stops af-ter about 4 to 8 seconds.

(d) Discharge Warning LightThis light warns that the battery is beingdischarged.If it comes on while you are driving, thereis a problem somewhere in the chargingsystem.The engine ignition will continue to oper-ate, however, until the battery is dis-charged. Turn off the air conditioning,blower, radio, etc., and drive directly to thenearest Toyota dealer or repair shop.

NOTICE

Do not continue driving if theengine drive belt is broken or loose.

(e) Malfunction Indicator LampThis lamp comes on in the followingcases.a. The fuel tank is completely empty.(See “Fuel gauge” in Chapter 1–5 for in-structions.)b. There is a problem somewhere inyour engine or automatic transmissionelectrical system.If it comes on while you are driving in caseb, have your vehicle checked/repaired byyour Toyota dealer as soon as possible.

(f) Low Fuel Pressure Warning LightThis light comes on when the fuel level inthe tank becomes nearly empty. Fill upthe tank as soon as possible.(g) Low Oil Level Warning LightThis light warns that the engine oil pres-sure is too low.If it flickers or stays on while you are driv-ing, pull off the road to a safe place andstop the engine immediately. Call a Toyo-ta dealer or qualified repair shop for assis-tance.The light may occasionally flicker whenthe engine is idling or it may come on brief-ly after a hard stop. There is no cause forconcern if it then goes out when the en-gine is accelerated slightly.The light may come on when the oil levelis extremely low. It is not designed to indi-cate low oil level, and the oil level must bechecked using the level dipstick.

NOTICE

Do not drive the vehicle with thewarning light on—even for oneblock. It may ruin the engine.

Page 72: Owners Manual

64

(h) Low Engine Oil Level WarningLight

The light warns that the engine oil level istoo low. Add oil as soon as possible. (Forinstructions, see “Checking the engine oillevel” in Chapter 7–2.)

NOTICE

Continued engine operation withlow engine oil will damage theengine.

(i) “ABS” Warning LightThis light warns that there is a problemsomewhere in your anti–lock brake sys-tem.If the light comes on while you are driving,have your vehicle checked by your Toyotadealer as soon as possible.The light will come on when the ignitionkey is turned to the “ON” position. Afterabout 3 seconds, the light will go off.When the “ABS” warning light is on (andthe brake system warning light is off), thebrake system operates conventionally butanti–lock brake system is not assistingbrake performance so that the wheels canlock–up during sudden braking or brakingon slippery road surfaces.

(j) Open Door Warning LightThis light remains on until both side doorsand back door are completely closed.(k) Rear Light Failure Warning LightIf this light comes on when the headlightswitch is turned on (at the first or secondclickstop), it indicates that one or more ofthe tail lights are burned out.If it comes on when the brake pedal is de-pressed, one or more stop lights areburned out or the stop light circuit is inneed of repair.Have defective bulbs replaced as soon aspossible.(l) SRS Airbag Warning LightThis light will come on when the igni-tion key is turned to the “ACC” or “ON”position. After about 6 seconds, thelight w ill go off. This means the airbagsystem is operating properly.The warning light system monitors the air-bag sensors, center airbag sensor as-sembly, inflators, warning light, intercon-necting wiring and power sources.If either of the following conditions occurs,this indicates a malfunction somewhere inthe parts monitored by the warning lightsystem. Contact your Toyota dealer assoon as possible to service the vehicle.

� The light does not come on when theignition key is turned to the “ACC” or“ON” position or remains on.

� The light comes on while driving.(m) “TRAC OFF” Indicator/Warning

LightThis light comes on when the ignition keyis turned to “N”, and will go off after 3 sec-onds. This means that the system is oper-ating properly.If one of the following conditions occurs,this indicates a malfunction somewhere inthe parts monitored by the warning lightsystem. Contact your Toyota dealer assoon as possible to service the vehicle.� The light remains on more than 3 sec-

onds after the ignition switch is turnedon.

� The light comes on while driving evenif the “TRAC OFF” switch is notpushed.

� The light flashes.(n) Key Reminder BuzzerThis buzzer reminds you to remove thekey when you open the driver’s door withthe ignition key in the “ACC” or “LOCK”position.

Page 73: Owners Manual

65

CHECKING SERVICE REMINDER INDI-CATORS (except the low fuel levelwarning light)1. Apply the parking brake.2. Open one of the side doors or the back

door.The open door warning light shouldcome on.

3. Close the door.The open door warning light should gooff.

4. Turn the ignition key to “ACC”.The SRS airbag warning light shouldcome on. It goes off after about 6 sec-onds.

5. Turn the ignition key to “ON”, but donot start the engine.

All the service reminder indicators exceptthe open door warning light and SRS air-bag warning light should come on. The“ABS” warning light and “TRAC OFF” in-dicator/warning light go off after about 3seconds.If any service reminder indicator or warn-ing buzzer does not function as describedabove, either the bulb is burned out or thecircuit is in need of repair. Have it checkedby your Toyota dealer as soon as pos-sible.

Page 74: Owners Manual

66

Page 75: Owners Manual

Part 1Ignition switch with steering lock

67

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–6Ignition switch,Transmissionand Parking brake� Ignition switch with steering lock� Automatic transmission� Manual transmission� Parking brake� Cruise control

“Start” – Starter motor on. The key willreturn to the “ON” position when re-leased.For starting tips, see Part 3.“ON” – Engine on and all accessorieson.This is the normal driving position.“ACC” – Accessories such as the ra-dio operate, but the engine is off.If you leave the key in the “ACC” or“LOCK” position and open the driver’sdoor, a buzzer will remind you to removethe key.“LOCK” – Engine is off and the steer-ing wheel is locked. The key can be re-moved only at this position.

You must push in the key to turn the keyfrom “ACC” to the “LOCK” position. Onvehicles with an automatic transmission,the selector lever must be put in the “P”position before pushing the key.When starting the engine, the key mayseem stuck at the “LOCK” position. Tofree it, first be sure the key is pushed allthe way in, and then rock the steeringwheel slightly while turning the key gently.

For manual transmission:Never remove the key when the ve-hicle is moving, as this will lock thesteering wheel and result in loss ofsteering control.

CAUTION!

NOTICE

Do not leave the key in the “ON”position if the engine is not running.The battery will discharge and theignition could be damaged.

Page 76: Owners Manual

When the cruise control is being used, even if you downshift the transmission by turning off the overdrive switch, engine brakingwill not be applied because the cruise control is not cancelled. For ways to decrease the vehicle speed, see “Cruise control” in thischapter.

68

Automatic transmission

Page 77: Owners Manual

69

Your automatic transmission has a shiftlock system to minimize the possibility ofincorrect operation. This means you canonly shift out of “P” position when thebrake pedal is depressed (with the ignitionswitch in “ON” position and the lock re-lease button depressed).(a) Normal Driving1. Start the engine as instructed in “How

to start the engine” in Part 3. The trans-mission must be in “P” or “N”.

2. With your foot holding down the brakepedal, shift the selector lever to “D”.

In “D” position, the automatic transmis-sion system will select the most suitablegear for running conditions such as nor-mal cruising, hill climbing, hard towing,etc.Always turn the overdrive switch on forbetter fuel economy and quieter driving. Ifthe engine coolant temperature is low, thetransmission will not shift into overdrivegear even with the overdrive switch on.

Never put your foot on the accelera-tor pedal while shifting.

CAUTION!

3. Release the parking brake and brakepedal. Depress the accelerator pedalslowly for smooth starting.

(b) Using engine brakingTo use engine braking, you can downshiftthe transmission as follows:� Turn off the overdrive switch. The “O/D

OFF” indicator light will come on andthe transmission will downshift to thethird gear.

� Shift into the “2” position. The trans-mission will downshift to the secondgear when the vehicle speed dropsdown to or lower than the followingspeed, and more powerful enginebraking will be obtained.2JZ–GE engine 115 km/h (72 mph)2JZ–GTE engine 130 km/h (81 mph)

� Shift into the “L” position. The trans-mission will downshift to the first gearwhen the vehicle speed drops down toor lower than the following speed, andmaximum engine braking will be ap-plied.2JZ–GE engine 48 km/h (29 mph)2JZ–GTE engine 60 km/h (37 mph)

When the cruise control is being used,even if you downshift the transmission byturning off the overdrive switch, enginebraking will not be applied because thecruise control is not cancelled. For waysto decrease the vehicle speed, see“Cruise control” in this chapter.

Be careful when downshifting on aslippery surface. Abrupt shiftingcould cause the vehicle to spin orskid.

CAUTION!

(c) Using the “2” and “L” positionsThe “2” and “L” positions are used forstrong engine braking as described pre-viously.With the selector lever in “2” or “L”, youcan start the vehicle in motion as with thelever in “D”.With the selector lever in “2”, the vehiclewill start in the first gear and automaticallyshift to the second gear.With the selector lever in “L”, the trans-mission is engaged in the first gear.

Page 78: Owners Manual

70

NOTICE

�Be careful not to overrev the en-gine. Watch the tachometer tokeep engine rpm from going intothe red zone. The approximatemaximum allowable speed foreach position is given below foryour reference:2JZ–GE

“2” 115 km/h (72 mph)“L” 63 km/h (39 mph)

2JZ–GTE engine“2” 130 km/h (81 mph)“L” 70 km/h (44 mph)

�Do not continue hill climbing orhard towing for a long time in the“2” or “L” position. This maycause severe automatic transmis-sion damage from overheating.To prevent such damage, “D”position should be used in hillclimbing or hard towing.

(d) Backing up1. Bring the vehicle to a complete stop.2. With the brake pedal held down with

your foot, shift the selector lever to the“R” position.

NOTICE

Never shift into reverse while thevehicle is moving.

(e) Parking1. Bring the vehicle to a complete stop.2. Pull the parking brake lever up fully to

securely apply the parking brake.3. With the brake pedal pressed down,

shift the selector lever to the “P” posi-tion.

While the vehicle is moving, neverattempt to move the selector leverinto “P” position under any circum-stances. Serious mechanical dam-age and loss of vehicle control mayresult.

CAUTION!

(f) Good driving practiceIf the transmission is repeatedly upshiftedand downshifted between third gear andoverdrive when climbing a gentle slope,the overdrive switch should be turned off.Be sure to turn the switch on immediatelyafterward.

Always keep your foot on the brakepedal while stopped with the enginerunning. This prevents the vehiclefrom creeping.

CAUTION!

NOTICE

Do not hold the vehicle on anupgrade with the accelerator pedal.It can cause the transmission tooverheat. Always use the brakepedal or parking brake.

(g) Rocking your vehicle if stuck

If you rock your vehicle to make itout when it becomes stuck in snow,mud, sand, etc., first check thatthere is no physical object or peoplearound the vehicle. During oper–ation the vehicle may suddenlymove forward or backward, causinginjury or damage to nearby peopleor objects.

CAUTION!

Page 79: Owners Manual

71

NOTICE

If you rock your vehicle, observe thefollowing precautions to preventdamage to the transmission andother parts.�Do not depress the accelerator

pedal while shifting the selectorlever or before the transmission iscompletely shifted to forward orreverse gear.

�Do not race the engine and avoidspinning the wheels.

�If your vehicle remains stuck afterrocking the vehicle several times,consider other ways such as tow-ing.

(h) Driving in manual modeIn the manual mode, the transmissionsystem stops automatic gear shifting. Usethis mode when starting your vehicle on asnowy or slippery road, when driving upsteep inclines, and down with enginebraking.To set the manual mode, push the“MANU” button. In the manual mode, the“MANU” mode indicator light comes onand the transmission shifts up or down asfollows.

“D” position—The transmission is lockedin third gear.When your vehicle speed drops down, thetransmission will shift to second gear forsmooth accelerating.“2” position—The transmission is lockedin second gear.“L” position—The transmission is lockedin first gear.

NOTICE

Be careful not to overrev the enginewhen using “2” or “L” position.

If the automatic transmission fluid tem-perature becomes too high, the “MANU”mode indicator light flashes for severalseconds and goes off. The driving modethen automatically changes from manualmode to the normal driving mode.To cancel the manual mode, push the“MANU” button once again. The “MANU”mode indicator light will go off and thetransmission system will work in the nor-mal driving mode.The manual mode automatically cancelsout when the ignition switch is off.

(i) If you cannot shift the selector leverout of “P” position

If you cannot shift the selector lever fromthe “P” position even though the brakepedal is depressed, use the shift lockoverride button. For instructions, see “Ifyou cannot shift automatic transmissionselector lever” in Part 4.

Manual transmission

Page 80: Owners Manual

72

The shift pattern is conventional asshown above.Press the clutch pedal down fully whileshifting, and then release it slowly. Do notrest your foot on the pedal while driving,because it will cause clutch trouble. Anddo not use the clutch to hold the vehiclewhen stopped on an uphill grade–use theparking brake.

Recommended shifting speedsThe transmission is fully synchronizedand upshifting or downshifting is easy.For the best compromise between fueleconomy and vehicle performance, youshould upshift or downshift at the follow-ing speeds:

Gear km/h (mph)1 to 2 or 2 to 1 24 (15)2 to 3 or 3 to 2 40 (25)3 to 4 or 4 to 3 64 (40)4 to 5 or 5 to 4 72 (45)Upshifting too soom or downshifting toolate will cause lugging, and possibly ping-ing. Regularly revving the engine to mami-mum speed in each gear will cause exces-sive engine wear and high fuelconsumption.Maximum allowable speedsTo get on a highway or to pass slower traf-fic, maximum acceleration may be neces-sary. Make sure you observe the followingmaximum allowable speeds in each gear:

gear km/h (mph)1 54 (34)2 94 (59)3 139 (87)

NOTICE

Do not downshift if you are goingfaster than the maximum allowablespeed for the next lower gear.

Good driving practiceIf it is difficult to shift into reverse, put thetransmission in neutral, release the clutchpedal momentarily, and then try again.

Be careful when downshifting on aslippery surface. Abrupt shiftingcould cause the vehicle to spin orskid.

CAUTION!

NOTICE

Make sure the vehicle is complet–ely stopped before shifting intoreverse.

Manual transmission (5–speed)

Page 81: Owners Manual

73

The shift pattern is shown above. Youmust lift up the ring around the gearshift lever to shift into “R” (reverse).Press the clutch pedal down fully whileshifting, and then release it slowly. Do notrest your foot on the pedal while driving,because it will cause clutch trouble. Anddo not use the clutch to hold the vehiclewhen stopped on an uphill grade–use theparking brake.Recommended shifting speedsThe transmission is fully synchronizedand upshifting or downshifting is easy.For the best compromise between fueleconomy and vehicle performance, youshould upshift or downshift at approxi-mately the following speeds:

gear km/h (mph)1 to 2 or 2 to 1 54 (34)2 to 3 or 3 to 2 40 (25)3 to 4 or 4 to 3 64 (40)4 to 5 or 5 to 4 72 (45)5 to 6 or 6 to 5 80 (50)Upshifting too soon or downshifting toolate will cause lugging, and possibly ping-ing. Regularly revving the engine to maxi-mum speed in each gear will cause exces-sive engine wear and high fuelconsumption.

Maximum allowable speedsTo get on a highway or to pass slower traf-fic, maximum acceleration may be neces-sary. Make sure you observe the followingmaximum allowable speeds in each gear:

gear km/h (mph)1 60 (38)2 97 (61)3 136 (85)4 175 (109)

NOTICE

Do not downshift if you are goingfaster than the maximum allowablespeed for the next lower gear.

Good driving practiceIf it is difficult to shift into reverse, put thetransmission in neutral, release the clutchpedal momentarily, and then try again.

Manual transmission (6–speed)

Page 82: Owners Manual

74

Be careful when downshifting on aslippery surface. Abrupt shiftingcould cause the vehicle to spin orskid.

CAUTION!

NOTICE

Make sure the vehicle is complete–ly stopped before shifting intoreverse.

To set: Pull up the lever.

To release: Pull up slightly, press thethumb button, and lower.Before leaving your vehicle, firmly applythe parking brake. For better holding pow-er, first depress the brake pedal and holdit while setting the parking brake.

Before driving, be sure the parkingbrake is fully released and the park-ing brake reminder light is off.

CAUTION!

The cruise control allows you to cruisethe vehicle at a desired speed over 40km/h (25 mph)even with your foot offthe accelerator pedal.Your cruising speed can be maintained upor down grades within the limits of engineperformance, although a slight speedchange may occur when driving up ordown the grades. On steeper hills, agreater speed change will occur so it isbetter to drive without the cruise control

Cruise controlParking brake

Page 83: Owners Manual

75

� To help maintain maximum con-trol of your vehicle, do not use thecruise control when driving inheavy or varying traffic, or in slip-pery (rainy, icy or snow–covered)or winding roads.

� Avoid vehicle speed increaseswhen driving downhill. If the ve-hicle speed is too fast in relation tothe cruise control set speed, can-cel the cruise control then down-shift the transmission to use en-gine braking to slow down.

CAUTION!

TURNING ON THE SYSTEMTo operate the cruise control, push the“CRUISE ON–OFF” switch. This turns thesystem on. The indicator light in the instru-ment panel shows that you can now setthe vehicle at a desired cruising speed.Another push will turn the system com-pletely off.

To avoid accidental cruise controlengagement, keep the “CRUISEON–OFF” switch off when not usingthe cruise control.

CAUTION!

SETTING AT A DESIRED SPEEDOn vehicles with automatic transmission,the transmission must be in “D” beforeyou set the cruise control speed.Bring your vehicle to the desired speed,push the lever down in the “SET/COAST”direction and release it. This sets the ve-hicle at that speed. If the speed is not sat-isfactory, tap it down for a slower speed.Each tap changes the set speed by 1.6km/h (1.0 mph). You can now take yourfoot off the accelerator pedal.If you need acceleration — for example,when passing—depress the acceleratorpedal enough for the vehicle to exceed theset speed. When you release it, the ve-hicle will return to the speed set prior to theacceleration.

For manual transmission:While driving with the cruisecontrol on, do not shift to neutralwithout depressing the clutchpedal, as this may cause engineracing or overreving.

CAUTION!

CANCELLING THE PRESET SPEEDYou can cancel the preset speed by:a. Pulling the lever in the “CANCEL” di-rection and releasing it.b. Depressing the brake pedal.c. Depressing the clutch pedal (manualtransmission).If the vehicle speed falls below about 40km/h (25 mph), the preset speed will auto-matically cancel out.If the vehicle speed drops 16 km/h (10mph) below the preset speed, the presetspeed will also automatically cancel out.If the preset speed automatically cancelsout other than for the above cases haveyour vehicle checked by your Toyota deal-er at the earliest opportunity.

Page 84: Owners Manual

76

RESETTING AT A FASTER SPEEDPress the control lever upward in the“RES/ACC” direction and hold it. Releasethe lever when the desired speed is at-tained. While the lever is held up, the ve-hicle will gradually gain speed.However, a faster way to reset is to accel-erate the vehicle and then push the leverdown in the “SET/COAST” direction.RESETTING AT A SLOWER SPEEDPush the control lever down in the “SET/COAST” direction and hold it. Release thelever when the desired speed is attained.While the lever is held down, the vehiclespeed will gradually decrease.However, a faster way to reset is to de-press the brake pedal and then push thelever down in the “SET/COAST” direction.

RESUMING THE PRESET SPEEDIf the preset speed is cancelled by pullingthe control lever or by depressing thebrake pedal or clutch pedal, pushing thelever up in the “RES/ACC” direction willrestore the speed set prior to cancellation.However, once the vehicle speed falls be-low about 40 km/h (25 mph), the presetspeed will not be resumed.CRUISE CONTROL FAILURE WARN-INGIf the “CRUISE” indicator light in the in-strument cluster flashes when using thecruise control, press the “CRUISE ON–OFF” button to turn the system off andthen press it again to turn it on.If any of the following conditions then oc-curs, there is some trouble in the cruisecontrol system.� The indicator light does not come on.� The indicator light flashes again.� The indicator light goes out after it

comes on.If this is the case, contact your Toyotadealer and have your vehicle inspected.

Page 85: Owners Manual

Part 1Car audio system——Reference

77

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–7Car audio systemand Air conditioningsystemCar audio system� Reference� Using your audio system:

some basics� Using your audio system:

controls and features� Anti–theft system� Car audio system operating

hintsAir conditioning system� Controls� Air flow selector settings� Operating tips

� Instrument panel vents

Type 1–1: AM·FM ETR radio/cassetteplayer

Type 1–2: AM ⋅FM ETR radio/cassetteplayer

Page 86: Owners Manual

78

Type 1–3: AM·FM ETR radio/cassetteplayer

Type 2: AM ⋅FM ETR radio/cassetteplayer/compact disc player

This section describes some of the basicfeatures on Toyota audio systems. Someinformation may not pertain to your sys-tem.Your audio system works when the igni-tion key is in the “ACC” or “ON” position.

TURNING THE SYSTEM ON AND OFFPush “PWR ⋅ VOL” or “PWR/VOL” to turnthe audio system on and off.Push “AM ⋅ FM”, “TAPE” or “CD” to turn onthat function without pushing “PWR ⋅VOL” or “PWR/VOL”.You can turn on the cassette player by in-serting a cassette tape.You can turn off the cassette player byejecting the cassette tape. If the audiosystem was previously off, then the entireaudio system will be turned off when youeject the cassette tape. If the radio waspreviously on, it will come on again.

SWITCHING BETWEEN FUNCTIONSPush “AM ⋅ FM”, “TAPE” or “CD” if the sys-tem is already on but you want to switchfrom one function to another.

TONE AND BALANCEFor details about your system’s tone andbalance controls, see the description ofyour own system.ToneHow good an audio program sounds toyou is largely determined by the mix of thetreble, midrange, and bass levels. In fact,different kinds of music and vocal pro-grams usually sound better with differentmixes of treble, midrange, and bass.BalanceA good balance of the left and right stereochannels and of the front and rear soundlevels is also important.Keep in mind that if you are listening to astereo recording or broadcast, changingthe right/left balance will increase the vol-ume of one group of sounds while de-creasing the volume of another.

—Using your audio system:some basics

Page 87: Owners Manual

79

YOUR RADIO ANTENNATo lower a manual antenna, carefully pushit down.To lower a power antenna, turn off the au-dio system by pushing “PWR ⋅ VOL” or“PWR/VOL”, or turn the ignition key to“LOCK”.On some models, the power antenna au-tomatically retracts when the radio modeis switched off to turn on the cassette tapeplayer or compact disc player.

To prevent damage to the antenna,make sure it is retracted beforedriving your Toyota through anautomatic car wash.

NOTICE

YOUR CASSETTE PLAYERWhen you insert a cassette, the exposedtape should be to the right.

Do not oil any part of the player anddo not insert anything other thancassette tapes into the slot, or thetape player may be damaged.

NOTICE

YOUR COMPACT DISC PLAYERWhen you insert a disc, gently push it inwith the label side up. (The player will au-tomatically eject a disc if the label side isdown.) The compact disc player will playfrom track 1 through the end of the disc.Then it will play from track 1 again.

Never try to disassemble or oil anypart of the compact disc player. Donot insert anything except acompact disc into the slot.

NOTICE

8 cm (3 in.) compact disc singlesYour compact disc player does not needan adaptor to play compact disc singles.Compact disc singles are about 8 cm (3in.) in diameter–smaller than standarddiscs.After you eject a compact disc single, donot insert a standard 12 cm (5 in.) disc un-til “DISC” disappears from the display.

Do not use an adaptor for compactdisc singles—it could causetracking errors or interfere with theejection of compact discs.

NOTICE

Page 88: Owners Manual

80

Details of specific buttons, controls, andfeatures are described in the alphabeticallisting that follows.

—Using your audio system:controls and features�Type 1–1

Page 89: Owners Manual

81

Details of specific buttons, controls, andfeatures are described in the alphabeticallisting that follows.

�Type 1–2

Page 90: Owners Manual

82

Details of specific buttons, controls, andfeatures are described in the alphabeticallisting that follows.

�Type 1–3

Page 91: Owners Manual

83

1 2 3 4 5 6 (Preset buttons)These buttons are used to preset andtune in radio stations.To preset a station to a button: Tune in thedesired station (see “TUNE” or “TUNE/SEEK”). Push and hold down the buttonuntil you hear a beep–this will set the sta-tion to the button. The button number willappear on the display.To tune in to a preset station: Push thebutton for the station you want. The buttonnumber and station frequency will appearon the display.Type 1–1 and 1–2—These systems canstore one AM and one FM station for eachbutton. The preset station memory will becanceled out if the power source is inter-rupted (battery disconnected or fuseblown).Type 1–3—These systems can store oneAM and two FM stations for each button.(The display will show “AM”, “FM1”, or“FM2” when you push “AM ⋅ FM”.) To can-cel out the preset station memory, push“1”, “2”, and “3” at the same time and holdthem in until you hear a beep.

/EJECT (Eject button)Push this button to eject a cassette.After you turn the ignition to “LOCK”, youwill be able to eject a cassette but you willnot be able to reinsert it.AM ⋅ FMPush “AM ⋅ FM” to switch between the AMand FM bands.Type 1–1 and 1–2—”AM” or “FM” will ap-pear on the display.Type 1–3—”AM”, “FM1” or “FM2” will ap-pear on the display.If the audio system is off, you can turn onthe radio by pushing “AM ⋅ FM”. Also,push “AM⋅FM” to switch from cassette op-eration to radio operation.APS (Automatic program selection)Type 1–3 onlyThe automatic program selection (APS)feature allows you to program your cas-sette player to skip forward or backwardto locate the song you want to hear. Youcan skip up to nine tracks at a time.Push “APS”. “APS” and “1” will appear onthe display.

Next, push “APS” until the number on thedisplay reaches the number of tracks youwant to skip. If you push “APS” ten times,the APS feature will be turned off.� If you choose the number “1”, the play-

er will rewind to the beginning of thecurrent track.

� When counting the number of tracksyou want to rewind, remember tocount the current track as well. For ex-ample, if you want to rewind to a songthat is two before the song you are lis-tening to, push “APS” until “3” appearson the display.

Finally, push “REW” or “FF” to choose thedirection you want to skip. The player willrewind or fast forward the selected num-ber of tracks and play.The APS number you select can be higherthan the number of tracks remaining onthe current cassette side. After the begin-ning or end of the tape is reached, theplayer will automatically reverse sidesand rewind or fast forward the additionalnumber of tracks.

Page 92: Owners Manual

84

There must be at least 3 seconds of blankspace between tracks in order for the APSfeature to work correctly. In addition, theAPS feature may not work well with somespoken word, live, or classical recordings.

BAL (Balance)This knob lets you adjust the balance be-tween the right and left speakers.

BASSThis knob lets you adjust the bass level.Push “BASS/TREB” so that it pops out ofits retracted position. Turn the knob to ad-just the bass. Push the knob back into itsretracted position.

Dolby NR*Type 1–1 and 1–2 onlyIf you are listening to a tape that was re-corded with Dolby Noise Reduction,push the button marked with thedouble–D symbol. The double–D symbolwill appear on the display. Push the buttonagain to turn off Dolby NR.The Dolby NR mode reduces tape noiseby about 10 dB. For best sound reproduc-tion, play your tapes with this button on oroff according to the mode used for record-ing the tape.

*: Dolby noise reduction manufactured under license from Dolby Lab-oratories Licensing Corporation. “DOLBY” and the double D symbolare trademarks of Dolby Laboratories Licensing Corporation.

Dolby B ⋅ C*Type 1–3 onlyIf you are listening to a tape that was re-corded with Dolby B or C Noise Reduc-tion, push the button marked with thedouble–D symbol until the appropriatesymbol appears on the display. To turn offDolby , push the button until the symboldisappears from the display.The Dolby B NR mode reduces tape noiseby about 10dB. The Dolby C NR mode re-duces tape noise by another 10 dB, orabout 20 dB total. For best sound repro-duction, select the same NR mode thatwas used to record the tape.*: Dolby noise reduction manufactured under license from Dolby Lab-oratories Licensing Corporation. “DOLBY” and the double D symbolare trademarks of Dolby Laboratories Licensing Corporation.

FADEMove the “FADE” ring around “PWR/VOL” to adjust the front/rear balance.

MTL (Metal) displayType 1–3 onlyIf a metal or chrome equivalent cassettetape is put in the cassette player, the play-er will automatically adapt to it and “MTL”will appear on the display.

PROG (Program)Type 1–2 and 1–3 onlypush “PROG” to select the other side of acassette tape. The display indicateswhich side is currently selected (“∧ ”indicates top side, “∨ ” indicates bottomside).Auto–reverse feature—After the cassetteplayer reaches the end of a tape side, itautomatically reverses and begins to playthe other side. This is true whether thecassette was playing or fast forwarding.

PWR/VOL (Power/Volume)Push “PWR/VOL” to turn the audio sys-tem on and off. Turn the “PWR/VOL” knobto adjust the volume.Pull out and then turn “PWR/VOL” to ad-just the balance between the right and leftspeakers. Move “FADE” around “PWR/VOL” to adjust the front/rear balance.

Page 93: Owners Manual

85

REW/FF (Rewind/Fast forward)Push the “FF” side of the button to fast for-ward a cassette tape. “FF” will appear onthe display. Push the “REW” side to re-wind a tape. “REW” will appear on the dis-play.To stop the tape while it is fast forwarding,push “FF” or “TAPE”; to stop the tapewhile it is rewinding, push “REW” or“TAPE”. The tape will immediately beginto play.If a tape side rewinds completely, the cas-sette player will stop and then play thatsame side. If a tape fast forwards com-pletely, the cassette palyer will play theother side of the tape, using the auto–re-verse feature.R.M (Radio monitor)Type 1–3 onlyThe radio monitor feature allows you tolisten to the radio while a cassette is beingrewound or fast forwarded.Push “R ⋅ M”. “R ⋅ M” will appear on the dis-play. Any time you are rewinding or fastforwarding a cassette tape, the radio willplay the station that was set most recent-ly. (You can not change the radio stationunless you switch out of the cassette play-er function.)

Push “R ⋅ M” again to turn off the R’M fea-ture.RPT (Repeat)Type 1–3 onlyThe repeat feature automatically replaysthe current cassette.Push “RPT” while the track is playing.“RPT” will appear on the display. Whenthe track ends, it will automatically be re-wound and replayed. This process will becontinued until you push the button againto turn off the repeat feature.There must be at least 3 seconds of blankspace between tracks in order for the re-peat feature to work correctly.

SCANType 1–2 and 1–3 onlyYou can either scan all the frequencies ona band or scan only the preset stations forthat band.To scan the preset stations: quickly pushand release “SCAN”. If you hear a beep,you held the button too long, and the radiowill scan all the frequencies. The radio willtune in the next preset station up theband, stay there for a few seconds, andthe move to the next preset station. To se-lect a station, push “SCAN” a secondtime.

To scan all the frequencies: Push “SCAN”until you hear a beep. The radio will findthe next station up the station band, staythere for a few seconds, and then scanagain. To select a station, push “SCAN” asecond time.Cassette PlayerType 1–3 onlyThe cassette player scan feature is similarto the radio scan feature and uses thesame button.Push “SCAN”. “SCAN” will appear on thedisplay. The player will fast forward to thenext cassette track, play it for 12 seconds,and then scan again. To select a track,push “SCAN” a second time. If the playerreaches the end of one side of a cassettetape, it will continue scanning on the otherside.SKIPType 1–3 onlyThe skip feature allows you to fast forwardpast long stretches of blank tape. This isespecially useful at the end of cassettes.

Page 94: Owners Manual

86

Push “SKIP”. “SKIP” will appear on thedisplay. The cassette player will keeptrack of how much blank space it plays.Any time it has played about 10 secondsof blank tape, it will automatically fast for-ward to the next track and begin to play.Push the button a second time to turn offthe skip feature.ST (Stereo reception) displayYour radio automatically changes to ste-reo reception when a stereo broadcast isreceived. “ST” appears on the display. Ifthe signal becomes weak, the radio re-duces the amount of channel separationto prevent the weak signal from creatingnoise. If the signal becomes extremelyweak, the radio switches from stereo tomono reception.TAPEPush “TAPE” to switch from radio opera-tion to cassette operation. If the audiosystem is off, you can turn on the cassetteplayer by pushing “TAPE”. If both cases,a cassette must already be loaded in theplayer.

TREB (Treble)This knob lets you adjust the treble level.Push “BASS/TREB” so that it pops out ofits retracted position. Pull out the knob.Turn the knob to adjust the treble. Pushthe knob back into its retracted position.

TUNE/SEEK

TuningYour Toyota has an electronic tuning radio(ETR).Push and release the “∧ ” (up) or “∨ ”(down) side of “TUNE/SEEK” to step up ordown the station band. If you hear a beep,you held the button too long and the radiowill go into the seek mode.

SeekingIn the seak mode, the radio finds andplays the next station up or down the sta-tion band.To seek a station, push and hold the “∧ ” or“∨ ” side of “TUNE/SEEK” until you hear abeep. Do this again to find another station.

Page 95: Owners Manual

87

Button display for radio/cassette tapeplayer/compact disc player

�Type 2

Page 96: Owners Manual

88

Your audio system shows there differentbutton displays that changes in accor-dance with the audio mode you have se-lected.Radio display (display 1)Cassette player display (display 2)Compact disc player display (display 3)Details of specific buttons, controls, andfeatures are described in the alphabeticallisting that follows.

1 2 3 4 5 6 (Press buttons)These buttons are used to preset andtune in radio stations.To preset a station to a button: Tune in thedesired station (see “TUNE” button).Push and hold down the button until youhear a beep–this will set the station to thebutton. The button number will appear onthe display.To tune in to a preset station: Push thebutton for the station you want. The buttonnumber and station frequency will appearon the display.These systems can store one AM and twoFM stations for each button. (The displaywill show “AM”, “FM1”, or “FM2” when youpush “AM ⋅ FM”) To cancel out the presetstation memory, push “1”, “2”, and “3” atthe same time and hold them in until youhear a beep.

(Eject Button)Push the cassette tape eject button toeject a cassette. Push the compact disceject button to eject a compact disc.After you turn the ignition to “LOCK”, youwill be able to eject a cassette or disc butyou will not be able to reinsert it.I��/���I (Track down/up button)By using this button, you can skip up ordown to a different track.Cassette PlayerYou can skip up to nine tracks at a time.Push the up or down side of the button. “1.FF” or “1. REW” will appear on the display.Next, push either side of the track buttonuntil the number on the display reachesthe number of tracks you want to skip. Ifyou push the button ten times, the skipfeature will be turned off.When counting the number of tracks youwant to rewind, remember to count thecurrent track as well. For example, if youwant to rewind to a song that is two beforethe song you are listening to, push on thedown side of the button until “3. REW” ap-pears on the display.

Page 97: Owners Manual

89

If you have pushed the track button morethan you wanted to, push the other side ofthe button. The track number will be re-duced.The track number you select is not valid ifit is higher than the number of tracks re-maining on the current cassette side.� After the beginning of the tape is

reached, the player will automaticallystart playing the same side.

� After the end of the tape is reached,the player will automatically reversesides and start playing the other side.

There must be at least 3 seconds of blankspace between tracks for the track buttonto work correctly. In addition, the featuremay not work well with some spokenword, live, or classical recordings.Compact Disc PlayerPush either side of the track button untilthe number of the track you want to listento appears on the display. If you want toreturn the beginning of the current track,push the down side of the button one time,quickly.

��/�� (Reverse/Fast forward but-tons)

Cassette PlayerPush the fast forward button to fast for-ward a cassette tape. “FF” will appear onthe display. Push the reverse button to re-wind a tape. “REW” will appear on the dis-play.To stop the tape while it is fast forwarding,push on the up side of the track down/upbutton or “TAPE”’; to stop the tape whileit is rewinding, push on the down side ofthe track down/up button or “TAPE”.If a tape side rewinds completely, the cas-sette player will stop and then play thatsame side. If a tape fast forwards com-pletely, the cassette player will play theother side of the tape, using the auto–re-verse feature.Compact Disc PlayerIf you want to fast forward or reversethrough a compact disc track, push andhold in the fast forward or reverse button.When you release the button, the com-pact disc player will resume playing.

AM ⋅ FMPush “AM⋅FM” to switch between the AMand FM bands. “AM”, “FM1” or “FM2” willappear on the display. These systems al-low you to set twelve FM stations, two foreach button.If the audio system is off, you can turn onthe radio by pushing “AM ⋅ FM”. Also,push “AM ⋅ FM” to switch from cassette orcompact disc operation to radio opera-tion.BALL (Balance)This knob lets you adjust the balance be-tween the right and left speakers.Push “MID/BAL” so that it pops out of itsretracted position. Pull out the knob. Turnthe knob to adjust the balance. Push theknob back into its retracted position.

BASSThis knob lets you adjust the bass level.Push “BASS” so that it pops out of its re-tracted position. Turn the knob to adjustthe bass. Push the knob back into its re-tracted position.

Page 98: Owners Manual

90

CD (Compact Disc)Push “CD” to switch from radio or cas-sette operation to compact disc operation.If the audio system is off, you can turn onthe compact disc player by pushing “CD”.In both cases, a disc must already beloaded in the player.When the audio is set into compact discoperation, the display shows the tracknumber currently being played. Pushing“CD” changes the display to show thelength of the current program beingplayed so far. By pushing the button onceagain, the display returns to that of tracknumber.Dolby B ⋅ C *If you are listening to a tape that was re-corded with Dolby B or C Noise Reduc-tion, push the button by the double–Dsymbol until the appropriate symbol ap-pears on the display. To turn off Dolby push the button until the symbol disap-pears from the display.

The Dolby B NR mode reduces tape noiseby about 10 dB. The Dolby C NR mode re-duces tape noise by another 10 dB, orabout 20 dB total. For best sound repro-duction, select the same NR mode thatwas used to record the tape.*: Dolby noise reduction manufactured under license from Dolby Lab-oratories Licensing Corporation. “DOLBY” and the double D symbolare trademarks of Dolby Laboratories Licensing Corporation.

Five EQ settings

Page 99: Owners Manual

91

EQ (Equalizer)Your audio system can store five differentEQ settings in its memory so that you willnot need to readjust it every time you lis-ten to a different program.Five common settings are stored in thesystem’s memory when it is manufac-tured (see illustration).To use a preset EQ setting: Push “EQ”.The levers for the first setting and “EQ–1”will appear on the display. Push “EQ” untilyou reach the setting you want. The audiosystem will adjust the program you arehearing to the selected setting.To change a preset EQ setting: Push “EQ”until the setting you want to change ap-pears on the display. Adjust the bass,mid–range, and treble level using the“BASS”, “MID/BAL”, and “TREB/FADE.”To save an EQ setting: After you havechanged a setting, push “EQ” until youhear a beep. This will replace the originalfactory setting with your new one.To cancel one of the EQ settings yousaved: With the setting on the display,push in and hold “EQ” until you haveheard both the first “save” beep and a sec-ond beep that means the setting has beencanceled. The original factory setting willappear on the display.

To cancel all of the changed EQ settings:Push and hold in”EQ” until you hear a thirdbeep.

FADEThis knob lets you adjust the balance be-tween the front and rear speakers.Push “TREB/FADE” so that it pops out ofits retracted position. Pull out the knob.Turn the knob to adjust the front/rear bal-ance. Push the knob back into its re-tracted position.

MID (Mid–range)This knob lets you adjust the mid–rangelevel.Push “MID/BAL” knob so that it pops outof its retracted position. Turn the knob toadjust the mid–range level. Push the knobback into its retracted position.

MTL (Metal) DisplayIf a metal or chrome equivalent cassettetape is put in the cassette player, the play-er will automatically adapt to it and “MTL”will appear on the display.

PROG (Program)Push “PROG” to select the other side ofa cassette tape. The display indicateswhich side is currently selected (“∧ ” indi-cates top side, “v” indicates bottom side).Auto–reverse feature: After the cassetteplayer reaches the end of a tape side, itautomatically reverses and begins to playthe other side. This is true whether thecassette was playing or fast forwarding.PWR/VOL (Power/Volume)Push “PWR/VOL” to turn the audio sys-tem on and off. Turn “PWR/VOL” to adjustthe volume.RAND (Random)The random feature allows you to listen tothe tracks on a compact disc in random or-der.When you push “RAND”, “RAND” will ap-pear on the display and the player will playthe tracks in random order. Push the but-ton again to turn off the random feature.

Page 100: Owners Manual

92

RM (Radio Monitor)The radio monitor feature allows you tolisten to the radio while a cassette is beingrewound or fast forwarded.Push “RM”. “RM” will appear on the dis-play. Any time you are rewinding or fastforwarding a cassette tape, the radio willplay the station that was set most recent-ly. (You can not change the radio stationunless you switch out of the cassette play-er function.)Push “RM” again to turn off the RM fea-ture.RPT (Repeat)The repeat feature automatically replaysthe current cassette or compact disctrack.Push “RPT” while the track is playing.“RPT” will appear on the display. Whenthe track ends, it will automatically be re-wound (cassette) and replayed. This pro-cess will be continued until you push thebutton again to turn off the repeat feature.Cassettes—There must be at least 3 sec-onds of blank space between tracks in or-der for the repeat feature to work correct-ly.

ScanRadioYou can either scan all the frequencies ona band or scan only the preset stations forthat band.To scan the preset stations: Quickly pushand release “SCAN.” If you hear a beep,you held the button too long, and the radiowill scan all the frequencies. The radio willtune in the next preset station up theband, stay there for a few seconds, andthen move to the next preset station. Toselect a station, push “SCAN” a secondtime.To scan all the frequencies: Push “SCAN”until you hear a beep. The radio will findthe next station up the station band, staythere for a few seconds, and then scanagain. To select a station, push “SCAN” asecond time.Cassette PlayerThe cassette player scan feature is similarto the radio scan feature and uses thesame button.

Push “SCAN”. “SCAN” will appear on thedisplay. The player will fast forward to thenext cassette track, play it for 12 seconds,and then scan again. To select a track,push “SCAN” a second time. If the playerreaches the end of one side of a cassettetape, it will continue scanning on the otherside.Compact disc playerThe compact disc player scan feature issimilar to the radio scan feature.Push “SCAN”. “SCAN” will appear on thedisplay. The compact disc player will playthe next track for 10 seconds, then scanagain. To select a track, push “SCAN” asecond time. If the player reaches the endof the disc, it will continue scanning attrack 1.SKIPThe skip feature allows you to fast forwardpast long stretches of blank tape. This isespecially useful at the end of cassettes.

Page 101: Owners Manual

93

Push “SKIP”. “SKIP” will appear on thedisplay. The cassette player will keeptrack of how much blank space it plays.Any time it has played about 10 secondsof blank tape, it will automatically fast for-ward to the next track and begin to play.Push the button a second time to turn offthe skip feature.ST (Stereo reception) displayYour radio automatically changes to ste-reo reception when a stereo broadcast isreceived. “ST” appears on the display. Ifthe signal becomes weak, the radio re-duces the amount of channel separationto prevent the weak signal from creatingnoise. If the signal becomes extremelyweak, the radio switches from stereo tomono reception.

TAPEPush “TAPE” to switch from radio or com-pact disc operation to cassette operation.If the audio system is off, you can turn onthe cassette player by pushing “TAPE”. Inboth cases, a cassette must already beloaded in the player.

TREB (Treble)This knob lets you adjust the treble level.Push “TREB/BASS” so that it pops out ofits retracted position. Turn the knob to ad-just the treble. Push the knob back into itsretracted position.

TUNE

TuningYour Toyota has an electronic tuning radio(ETR).Push and release the “∧ ” (up) or “v”(down) side of “TUNE” to step up or downthe station band. (If you hear a beep, youheld the button too long and the radio willgo into the seek mode.)

SeekingIn the seek mode, the radio finds andplays the next station up or down the sta-tion band.To seek a station, push and hold the “^” or“v” side of “TUNE” until you hear a beep.Do this again to find another station.

The anti–theft system prevents the audiosystem from working after it has been dis-connected. To activate the system, youmust set a three–digit security code. Afterthe system is set, “SEC” will appear in thedisplay each time the ignition is turnedform “LOCK” or “ACC” or “ON”. Also, theanti–theft light flashes every few secondswhile the ignition key is in the “LOCK”position.You will need to know your security codeto reactivate your radio after electrical ser-vice is performed on your vehicle.Choose a security code that is easy to re-member and keep a copy of it (not in yourToyota).

NOTICE

If you pushed any wrong buttons onthe anti–theft system, the followingmessages will appear on thedisplay.�“Err”—You have pushed wrong

buttons.

—Anti–theft system(type 1–3 and 2 only)

Page 102: Owners Manual

94

�“1–9”—Indicates the number of er-rors you have made. You may makeup to nine errors, but no more!

�“HELP”—The number of error youcan make was exceeded. The audiosytem is completely inoperable.Contact you Toyota dealer.

Setting a security code for the firsttime.1. Turn off the audio system.Turn the ignition key to “ACC”.Simultaneously push and hold in “1”, “6”,and “PWR/VOL” until “SEC” appears onthe display.

2. While you are holding in the “^” side of“TUNE”, push “1”.

The display will read “—“.On some modes, “�” and “�” will alsoturn on.

Page 103: Owners Manual

95

3. Input the three digit code.You have 10 seconds to enter each digit.For example, “209”:To set the first digit: Push “1” until the digityou want appears on the display.To set the second digit: Push “2” until thedigit you want appears on the display.To set the third digit: Push “3” until the digityou want appears on the display.

4. The three–digit code should be on thedisplay.

Push and hold in “SCAN” until the displaygoes dark. (At first, “SEC” will appear onthe display.)

If you pushed any wrong buttons,“Err” and the number of errors youhave made will appear on the displaybefore “SEC” does. Go back to step 2and try again. If the display returns to“—“ while you are entering the code,go back to step 3.To make sure the security code has beenaccepted, turn the ignition to “LOCK” andthen back to “ACC.” “SEC” should appearon the display.Choose a security code that is easy to re-member and keep a copy of it (not in yourToyota).

Page 104: Owners Manual

96

Changing the security code1. Turn off the audio system.Turn the ignition key to “ACC”.Simultaneously push and hold in “1”, “6”,and “PWR/VOL” until “SEC” appears onthe display.

2. While you are holding in the “^” side of“TUNE” push “1”.

The display will read “—”.On some models, “ �” and “�” will alsoturn on.

3. Input the existing three–digit code.You have 10 seconds to enter each digit.For example, “209”:To set the first digit: Push “1” until the digityou want appears on the display.To set the second digit: Push “2” until thedigit you want appears on the display.To set the third digit: Push “3” until the digityou want appears on the display.

Page 105: Owners Manual

97

4. The three–digit code should be on thedisplay.

Push “SCAN”.5. Repeat steps 2 and 3, this time enter-

ing your new code. You can use digits“0” through “9”.

6. The new three–digit code should be onthe display.

Push and hold in “SCAN” until the displaygoes dark. (At first, “SEC” will appear onthe display.)

If you pushed any wrong buttons,“Err” and the number of errors youhave made will appear on the displaybefore “SEC” does. Go back to step 2and try again. If the display returns to“—“ while you are entering the code,go back to step 3.To make sure the security code has beenaccepted, turn the ignition to “LOCK” andthen back to “ACC”. “SEC” should appearon the display.

NOTICEA tenth error will activate theanti–theft system and “HELP” willappear on the display. The audiosystem will be completelyinoperable. At this time, theanti–theft light also comes on. If thisoccurs, contact your Toyota dealer.

Page 106: Owners Manual

98

Cleaning the security code.1. Turn off the audio system.Turn the ignition key to “ACC”.Simultaneously push and hold in “1”, “6”,and “PWR/VOL” until “SEC” appears onthe display.

2. While you are holding in the “∧ ” side of“TUNE”, push “1”.

The display will read “—“.On some models, “�” and “�” will alsoturn on.

3. Input the existing three–digit code.You have 10 seconds to enter each digit.For example, “209”:To set the first digit: Push “1” until the digityou want appears on the display.To set the second digit: Push “2” until thedigit you want appears on the display.To set the third digit: Push “3” until the digityou want appears on the display.

Page 107: Owners Manual

99

4. The three–digit code should be on thedisplay.

Push “SCAN”.The display will read “–––“.5. Wait for 10 seconds until the security

system is deactivated and the displaygoes dark.

If you pushed any wrong buttons,“Err” and the number of errors youhave made will appear on the displaybefore “SEC” does. Go back to step 2and try again. If the display returns to“–––“ while you are entering the code,go back to step 3.

NOTICE

A tenth error will activate theanti–theft system and “HELP” willappear on the display. The audiosystem will be completelyinoperable. At this time, theanti–theft light also comes on. If thisoccurs, contact your Toyota dealer.

Reactivating a disabled audio system1. Turn the ignition switch to “ACC”.2. While you are holding in the “∧ ” side of

“TUNE”, push “1”.The dispay will read “–––”.On some models, “�” and “�” will alsoturn on.

Page 108: Owners Manual

100

3. Input the existing three–digit code.You have 10 seconds to enter each digit.For example, “209”:To set the first digit: Push “1” until the digityou want appears on the display.To set the second digit: Push “2” until thedigit you want appears on the display.To set the third digit: Push “3” until the digityou want appears on the display.

4. The three–digit code should be on thedisplay.

Push and hold in “SCAN” until the displaygoes dark. (At first, “SEC” will appear onthe display.)

If you pushed any wrong buttons,“Err” and the number of errors youhave made will appear on the displaybefore “SEC” does. Go back to step 2and try again. If the display returns to“–––“ while you are entering the code,go back to step 3.To make sure the security code has beenaccepted, turn the ignition to “LOCK” andthen back to “ACC”. “SEC” should appearon the display.

NOTICE

A tenth error will activate theanti–theft system and “HELP” willappear on the display. The audiosystem will be completelyinoperable. At this time, theanti–theft light also comes on. If thisoccurs, contact your Toyota dealer.

Page 109: Owners Manual

101

NOTICE

To ensure the correct audio systemoperation:�Be careful not to spill beverages

over the audio system.�Do not put anything other than a

cassette tape or CD magazine intothe cassette tape slot or CDchanger.

ILLUMINATION CONTROL LOGICOn some audio–units, when the instru-ment panel lights are on, the letters on op-erable buttons of the mode in current uselight up together with the mode selectionand eject buttons.

RADIO RECEPTIONUsually, a problem with radio receptiondoes not mean there is a problem withyour radio–it is just the normal result ofconditions outside the vehicle.

For example, nearby buildings and terraincan interfere with FM reception. Powerlines or telephone wires can interfere withAM signals. And of course, radio signalshave a limited range, and the farther youare from a station, the weaker its signalwill be. In addition, reception conditionschange constantly as your vehicle moves.Here are some common reception prob-lems that probably do not indicate a prob-lem with your radio:FMFading and drifing stations—Generally,the effective range of FM is about 40 km(25 miles). Once outside this range, youmay notice fading and drifting, which in-crease with the distance from the radiotransmitter. They are often accompaniedby distortion.Multi–path—FM signals are reflective,making it possible for two signals to reachyour antenna at the same time. If this hap-pens, the signals will cancel each otherout, causing a momentary flutter or loss ofreception.Static and fluttering—These occur whensignals are blocked by buildings, trees, orother large objects. Increasing the basslevel may reduce static and fluttering.

Station swapping—If the FM signal youare listening to is interrupted or weak-ened, and there is another strong stationnearby on the FM band, your radio maytune in the second station until the originalsignal can be picked up again.AMFading—AM broadcasts are reflected bythe upper atmosphere–especially atnight. These reflected signals can inter-fere with those received directly from theradio station, causing the radio station tosound alternately strong and weak.Station interference—when a reflectedsignal and a signal received directly froma radio station are very nearly the samefrequency, they can interfere with eachother, making it difficult to hear the broad-cast.Static—AM is easily affected by externalsources of electrical noise, such as hightension power lines, lightening, or electri-cal motors. This results in static.CARING FOR YOUR CASSETTE PLAY-ER AND TAPESFor high performance from your cassetteplayer and tapes:Clean the tape head and other parts regu-larly.

—Car audio system operatinghints

Page 110: Owners Manual

102

� A dirty tape head or tape path can de-crease sound quality and tangle yourcassette tapes. The easiest way toclean them is by using a cleaning tape.(A wet type is recommended.)

Use high–quality cassettes.� Low–quality cassette tapes can cause

many problems, including poor sound,inconsistent playing speed, andconstant auto–reversing. They canalso get stuck or tangled in the cas-sette player.

� Do not use a cassette if it has beendamaged or tangled or if its label ispeeling off.

� Do not leave a cassette in the player ifyou are not listening to it, especially ifit is hot outside.

� Store cassettes in their cases and outof direct sunlight.

� Avoid using cassettes with a total play-ing time longer than 100 minutes (50minutes per side). The tape used inthese cassettes is thin and could getstuck or tangled in the cassette player.

CARING FOR YOUR COMPACT DISCPLAYER AND DISCS� Use only compact discs labeled as

shown.� Extremely high temperatures can

keep your compact disc player fromworking. On hot days, use the air con-ditioning to cool the vehicle interior be-fore you listen to a disc.

� Bumpy roads or other vibrations maymake your compact disc player skip.

� If moisture gets into your compact discplayer, you may not hear any soundeven though your compact disc playerappears to be working. Remove thedisc from the player and wait until itdries.

� Handle compact discs carefully, espe-cially when you are inserting them.Hold them on the edge and do notbend them. Avoid getting fingerprintson them, particularly on the shiny side.

� Dirt, scrapes, warping, pin holes, orother disc damage could cause theplayer to skip or to repeat a section ofa track. (To see a pin hole, hold the discup to the light.)

� Remove discs from the compact discplayer when you are not listening tothem. Store them in their plastic casesaway from moisture, heat, and directsunlight.

To clean a compact disc: Wipe it with asoft, lint–free cloth that has been damp-ened with water. Wipe in a straight linefrom the center to the edge of the disc (notin circles). Dry it with another soft, lint–free cloth. Do not use a conventional re-cord cleaner or anti–static device.

Page 111: Owners Manual

103

A new disc may have rough edges onits inner and outer perimeter. Removethe rough edges by pressing the sideof a ball–point pen or pencil againstthe inner and outer perimeter of thedisc as shown.If you continue to play a disc with roughedges, flakes will fall on to the signal sideof the disc and cause sound skipping orother problems.

Compact disc players use invisiblelaser beam which could cause haz-ardous radiation exposure if di-rected outside the unit. Be sure tooperate the player correctly asinstructed.

CAUTION!

Page 112: Owners Manual

104

1. “OFF” Button2. “AUTO” Button3. Air Intake Selector4. Temperature Selector5. Fan Speed Selector6. “A/C” Button7. Windshield Air Flow Button8. Air Flow Selector

Air conditioning system——Controls

Page 113: Owners Manual

105

“AUTO” buttonFor automatic operation of the air condi-tioning, press the “AUTO” button. An indi-cator light will illuminate to show that theautomatic operation mode has been se-lected.In the automatic operation mode, the airconditioning selects the most suitable airintake, fan speed and air flow according tothe temperature.You may use manual controls if you wantto select your own settings.To turn off the automatic operation, pressthe “OFF” button.Fan speed selectorTurn the knob to adjust the fan speed—tothe right to increase, to the left to de-crease.In automatic operation, you do not have toadjust the fan speed unless you desireanother fan speed mode.Temperature selectorTurn the knob to adjust the temperature—to the right to warm, to the left to cool.“OFF” buttonPush the button to turn off the air condi-tioning system.

Air flow selectorPress the buttons to select the vents usedfor air flow.In automatic operation, you do not have toselect the air flow unless you desireanother air flow mode.1. Panel—Air flows mainly from the in-

strument panel vents.2. Bi–level— Air flows from both the floor

vents and the instrument panel vents.3. Floor— Air flows mainly from the floor

vents.4. Floor/Windshield— Air flows mainly

from the floor vents and windshieldvents.

5. Windshield— Air flows mainly fromthe windshield vents.

Pressing the button once again returnsthe air flow mode to the last one used.Pressing the windshield air flow buttonturns on the defroster–linked air condi-tioning. At this time, the “A/C” button indi-cator comes on regardless of whether ornot the “A/C” button is pressed in. This isto clean up front view more quickly.For details about air flow selector settings,see the illustration after “A/C” button.

Page 114: Owners Manual

106

Air Intake selectorPress the button to select the air source.1. Recirculate— Recirculates the air in-

side the vehicle.2. Fresh— Draws outside air into the sys-

tem.In automatic operation, you do not have toselect the air intake unless you desireanother air intake mode.

“A/C” buttonTo turn on the air conditioning, press the“A/C” button. The “A/C” button indicatorwill come on. To turn the air conditioningoff, press the button again.If the “A/C” button indicator flashes, thereis a problem in the air conditioning systemand the air conditioning automaticallyshuts off. If this happens, take your ve-hicle to a Toyota dealer for service.

Page 115: Owners Manual

107

� To cool off your Toyota after it has beenparked in the hot sun, drive with thewindows open for a few minutes. Thisvents the hot air, allowing the air condi-tioning to cool the interior more quickly.

� Make sure the air intake grilles in frontof the windshield are not blocked (byleaves or snow, for example).

� On humid days, do not blow cold air onthe windshield. The windshield couldfog up because of the difference in airtemperature on the inside and outsideof the windshield.

� Keep the area under the front seatsclear to allow air to circulate through-out the vehicle.

� On cold days, move the fan speed to“HI” for a minute to help clear the in-take ducts of snow or moisture. Thiscan reduce the amount of fogging onthe windows.

—Air flow selector settings —Operating tips

Page 116: Owners Manual

108

HeatingFor best results, set controls to:For automatic operation—

Press in the “AUTO” button.Temperature — To the desired

temperatureAir conditioning —OFF

For manual operation—

Fan speed —To the desired fan speedTemperature — To the desired

temperatureAir intake —FRESH (outside air)Air flow —FLOORAir conditioning —OFF

� For quick heating, select recirculatedair for a few minutes. To keep the win-dows from fogging, select fresh afterthe vehicle interior has been warmed.

� Press the “A/C” button on for dehumid-ified heating.

� Choose floor/windshield air flow toheat the vehicle interior while defrost-ing the windshield.

Air conditioningFor best results, set controls to:For automatic operation—

Press in the “AUTO” button.Temperature — To the desired

temperatureAir conditioning —ON

For manual operation—

Fan speed —To the desired fan speedTemperature — To the desired

temperatureAir intake —FRESH (outside air)Air flow —PANELAir conditioning —ON

� For quick cooling, move the air intakeselector to recirculate for a few min-utes.

VentilationFor best results, set controls to:For automatic operation—

Press in the “AUTO” button.Temperature — Towards low

temperatureAir conditioning —OFF

For manual operation—

Fan speed —To the desired fan speedTemperature — Towards low

temperatureAir intake —FRESH (outside air)Air flow —PANELAir conditioning —OFF

Page 117: Owners Manual

109

Defogging and defrosting

—The inside of the windshieldFor best results, set controls to:

Temperature — Towards hightemperature to heat;low temperature to cool

Air intake —FRESH (outside air)Air flow —WINDSHIELD

Pressing the windshield air flow buttonturns on the defroster–linked air condi-tioning. At this time, the “A/C” button indi-cator comes on regardless of whether ornot the “A/C” button is pressed in. This isto clean up front view more quickly.� On humid days, do not blow cold air on

the windshield—the difference be-tween the outside and inside tempera-tures could make the fogging worse.

—The outside of the windshieldFor best results, set controls to:

Temperature — Towards hightemperature

Air intake —FRESH (outside air)Air flow —WINDSHIELD

Pressing the windshield air flow buttonturns on the defroster–linked air condi-tioning. At this time, the “A/C” button indi-cator comes on regardless of whether ornot the “A/C” button is pressed in. This isto clean up front view more quickly.� To heat the vehicle interior while de-

frosting the windshield, choose floor/windshield air flow.

—Instrument panel vents

Page 118: Owners Manual

110

If air flow control is not satisfactory, checkthe instrument panel vents. The instru-ment panel vents may be opened orclosed as shown.

Page 119: Owners Manual

Part 1 Clock

111

OPERATION OFINSTRUMENTS ANDCONTROLS—

Chapter 1–8Other equipment� Clock� Cigarette lighter and ashtray� Glovebox� Miscellany box� Luggage cover� Traction control system� Floor mat

The digital clock indicates the timewith the ignition key at the “ACC” or“ON” position. To reset the hour, de-press the “H” button. To reset the min-utes, depress the “M” button. To ad-just the time to full hour, depress the“:00” button.For example, if the “:00” button is de-pressed when the time is between1:01—1:29, the time will change to 1:00.If the time is between 1:30—1:59, the timewill change to 2:00.When the instrument panel lights areturned on, the brightness of the time indi-cation will be reduced.

Once the electrical power source hasbeen disconnected from the clock, thetime is automatically set to 1:00 (oneo’clock).

Page 120: Owners Manual

112

To operate the cigarette lighter, pressit in. When it becomes heated, it auto-matically pops out ready for use.If the engine is not running, the key mustbe in the “ACC” position.Do not hold the cigarette lighter pressedin.When finished with your cigarette, thor-oughly extinguish it in the ashtray to pre-vent other cigarette butts from catchingfire. After using the ashtray, close the ash-tray cover completely.To remove the ashtray, open the ashtraycover and pull it out.Use a Toyota genuine cigarette lighter orequivalent for replacement.

To reduce the chance of injury incase of an accident or sudden stopwhile driving, always close the ash-tray cover completely after using.

CAUTION!

To open the glovebox door, pull the le-ver. To lock the glovebox door, insertthe master key and turn it clockwise.With the instrument panel lights on, theglovebox light will come on when the dooris open.

To reduce the chance of injury incase of an accident or sudden stop,always keep the glovebox doorclosed while driving.

CAUTION!

GloveboxCigarette lighter and ashtray

Page 121: Owners Manual

113

To open the box, pull up the strap. When you open the back door, the lug-gage cover tilt ups for easy access tothe luggage area.

AUTOMATIC MODE

The traction control system automati-cally controls the spinning of the rearwheels which may occur when accel-erating on slippery road surfaces, thusassisting driver control and drivingpower to the rear wheels. When youturn the ignition switch on, the trac-tion control system always turns onautomatically, and the slip indicatorlight and “SNOW” indicator light willcome on. The indicator lights will gooff after about 3 seconds.

Miscellany box Luggage cover Traction control system

Page 122: Owners Manual

114

Leave the system on during ordinarydriving so that it can operate whenneeded. When traction control is ap-plied, the slip indicator light blinks. Ifyour vehicle still skids even thoughtraction control is applied, more pow-erful traction control is applied and the“SNOW” indicator light comes on.You may hear a slight clicking noise in theengine compartment when the engine isstarted. This means that the traction con-trol system is in the self–check mode, anddoes not indicate malfunction. When thetraction control system is operating, youmay feel vibration of your vehicle, causedby operation of the brakes. This indicatesthe system is functioning properly.When getting the vehicle out of mud ornew snow, etc. the traction control systemwill operate to prevent the wheels fromspinning. Even though the acceleratorpedal is fully depressed, the engine speedwill be restrained to a certain level.

MANUAL SNOW OPERATION

You can select the snow mode bypushing the “SNOW” switch. The“SNOW” indicator light will come on.To select the automatic mode, pushthe “OFF” switch. The “SNOW” indi-cator light will go off. If your vehiclestill skids, the system automaticallyoperates.MANUAL TRACTION CONTROL OFFOPERATION

You can turn off the traction controlsystem by pushing the “OFF” switch.The “TRAC OFF” indicator/warninglight will come on. Pushing the “OFFswitch a second time turns on the trac-tion control system and the “TRACOFF” indicator/warning light will gooff.If the “SNOW” indicator light is on,pushing the “OFF” switch once se-lects the automatic mode and pushingit a second time turns off the tractioncontrol system.

Page 123: Owners Manual

115

Under certain slippery road condi-tions, full stability of the vehicle andpower to the rear wheels cannot bemaintained, even though the trac-tion control system is in operation.In situations where the road surfaceis covered with ice or snow, your ve-hicle should be fitted with snowtires or tire chains and driven at amore cautious pace.

CAUTION!

Use a floor mat of the correct size.If the floor mat has a hole, then it is de-signed for use with a locking clip. Fix thefloor mat and locking clip into the hole inthe floor carpet.

Make sure the floor mat is properlyplaced on the floor carpet. If thefloor mat slips and interferes withthe movement of the pedals duringdriving, it may cause an accident.

CAUTION!

Floor mat

Page 124: Owners Manual

116

Page 125: Owners Manual

Part 2 Break-in period Fuel

117

INFORMATIONBEFORE DRIVINGYOUR TOYOTA� Break–in period� Fuel� Operation in foreign countries� Three–way catalytic converters� Engine exhaust cautions� Facts about engine oil

consumption� Brake system� Brake pad wear limit indicators� Luggage stowage precautions� Limited–slip differential� Your Toyota’s identification� Theft prevention labels� Suspension and chassis� Types of tires

Drive gently and avoid high speeds.Your vehicle does not need an elaboratebreak–in. But following a few simple tipsfor the first 1600 km (1000 miles) can addto the future economy and long life of yourvehicle:� Do not drive over 88 km/h (55 mph).� Do not run the engine over 4000 rpm.

Maintain engine speed between 2000and 4000 rpm.

� Avoid full–throttle starts.� Try to avoid hard stops during the first

300 km (200 miles).� Do not drive slowly with the manual

transmission in a high gear.� Do not drive for a long time at any

single speed, either fast or slow.

FUEL TYPEYour new vehicle must use only un-leaded gasoline.To help prevent gas station mixups, yourToyota has a new smaller fuel tank opening.The special nozzle on pumps with unleadedfuel will fit it, but the larger standard nozzleon pumps with leaded gas will not.

Do not use leaded gasoline. Use ofleaded gasoline will cause thethree–way catalytic converter tolose its effectiveness and the emis–sion control system to function im–properly. Also, this can increasemaintenance costs.

NOTICE

OCTANE NUMBERSelect premium unleaded gasoline witha Research Octane Number of 96 (Oc-tane Rating 91) or higher for optimumengine performance. However, if suchpremium type cannot be obtained, youmay temporarily use unleaded gasolinewith an octane number as low as 91 (Oc-tane Rating 87).

Page 126: Owners Manual

118

Use of unleaded fuel with an octane num-ber or rating lower than stated above willcause persistent heavy knocking. If se-vere, this will lead to engine damage.If your engine knocks...If you detact heavy knocking even whenusing the recommended fuel, or if youhear steady knocking while holding asteady speed on level roads, consult yourToyota dealer.However, now and then, you may noticelight knocking for a short time while accel-erating or driving up hills. This is no causefor concern.

GASOLINES CONTAINING DETER-GENT ADDITIVESToyota recommends use of gasolinesthat contain detergent additives toavoid build–up of engine deposits.For further details, ask your Toyota dealeror a local gasoline retailer..

GASOLINES CONTAINING MTBEGasolines that contain MTBE (MethylTertiary–Butyl Ether) are available inthe market. If you use a gasoline mixedwith MTBE, make certain that it doesnot contain more than 15% of MTBE.

If the use of gasolines containing MTBEcauses poor driveability and/or poor fueleconomy, you should discontinue the useof fuels containing MTBE.GASOLINES CONTAINING ALCOHOL

If the use of gasohol in your T oyota, besure that it is u nleaded, has an octanerating no lower than 87 and does notcontain more than 10% ethanol.Gasohol is a mixture of gasoline and etha-nol.Toyota does not recommend the use ofgasolines containing methanol. If you usegasoline containing methanol, use onlygasoline meeting the requirements aboveand also containing less than 5% metha-nol with cosolvents and corrosion inhibi-tors for methanol.

NOTICE

�Do not use gasohol other thanstated above. It will cause fuel system damage or vehicle perfor-mance problems.

�If driveability problems are en-countered (poor hot starting, va-porizing, engine knock, etc.),discontinue the use.

�Take care not to spill gasohol dur-ing refueling. Gasohol may causepaint damage.

FUEL TANK CAPACITY70 L (18.5 gal., 15.4 Imp. gal)

Page 127: Owners Manual

119

If you plan to drive your Toyota inanother country...First, comply with the vehicle registrationlaws.Second, confirm the availability of thecorrect fuel (unleaded and minimum oc-tane number).

The three–way catalytic converter isan emission control device installed inthe exhaust system.Its purpose is to reduce pollutants in theexhaust gas.

CAUTION!

� Keep people and combustible ma-terials away from the exhaust pipewhile the engine is running. Theexhaust gas is very hot.

� Do not drive, idle or park your ve-hicle over anything that might burneasily such as grass, leaves, paperor rags.

A large amount of unburned gasesflowing into the three–way catalyticconverter may cause it to overheatand create a fire hazard. To preventthis and other damage, observe thefollowing precautions:�Use only unleaded gasoline.

NOTICE

Three–way catalytic convertersOperation in foreign countries

Page 128: Owners Manual

120

�Do not drive with an extremely lowfuel level; running out of fuelcould cause the engine to misfire,creating an excessive load on thethree–way catalytic converter.

�Do not allow the engine to run atidle speed for more than 20 min-utes.

�Avoid racing the engine.�Do not push–start or pull–start

your vehicle.�Do not turn off the ignition while

the vehicle is moving.�Keep your engine in good running

order. Malfunctions in the engineelectrical system, electronic igni-tion system/distributor ignitionsystem or fuel system couldcause an extremely high three–way catalytic converter tempera-ture.

�If the engine becomes difficult tostart or stalls frequently, take yourvehicle in for a check–up as soonas possible. Remember, your To-yota dealer knows your vehicleand its three–way catalytic con-verter system best.

�To ensure that the three–way cata-lytic converter and the entireemission control system operateproperly, your vehicle must re-ceive the periodic inspections re-quired by the Toyota MaintenanceSchedule. For scheduled mainte-nance information, refer to theseparate “Owner’s Manual Sup-plement/Maintenance Schedule”.

CAUTION!

� Avoid inhaling the engine exhaust.It contains carbon monoxide,which is a colorless and odorlessgas. It can cause unconsciousnessor even death.

� Make sure the exhaust system hasno holes or loose connections. Thesystem should be checked fromtime to time. If you hit something,or notice a change in the sound ofthe exhaust, have the systemchecked immediately.

� Do not run the engine in a garage orenclosed area except for the timeneeded to drive the vehicle in orout. The exhaust gases cannot es-cape, making this a particularlydangerous situation.

� Do not remain for a long time in aparked vehicle with the engine run-ning. If it is unavoidable, however,do so only in an unconfined areaand adjust the heating or coolingsystem to force outside air into thevehicle.

Engine Exhaust Cautions

Page 129: Owners Manual

121

� Keep the back door closed whiledriving. An open or unsealedtrunklid may cause exhaust gasesto be drawn into the vehicle. If youmust drive with the trunklid opento accommodate a large object,close the windows, open all the in-strument panel vents and have theheating or cooling system deliverfresh air into the vehicle by turningthe fan to high speed with the air in-take control lever set at the OUT-SIDE AIR position.

� To allow proper operation of yourvehicle’s ventilation system, keepthe inlet grilles in front of the wind-shield clear of snow, leaves, or oth-er obstructions.

� If you smell exhaust fumes in thevehicle, drive with the windowsopen and the back door closed.Have the cause immediately lo-cated and corrected.

FUNCTIONS OF ENGINE OILEngine oil has the primary functions of lubri-cating and cooling the inside of the engine,and plays a major role in maintaining theengine in proper working order.ENGINE OIL CONSUMPTION

It is normal that an engine should con-sume some engine oil during normalengine operation. The causes of oilconsumption in a normal engine areas follows.� Oil is used to lubricate pistons, piston

rings and cylinders. A thin film of oil isleft on the cylinder wall when a pistonmoves downwards in the cylinder.High negative pressure generatedwhen the vehicle is decelerating suckssome of this oil into the combustionchamber. This oil as well as some partof the oil film left on the cylinder wall isburned by the high temperature com-bustion gases during the combustionprocess.

� Oil is also used to lubricate the stemsof the intake valves. Some of this oilis sucked into the combustion cham-ber together with the intake air and isburned along with the fuel. High tem-perature exhaust gases also burn theoil used to lubricate the exhaust valvestems.

The amount of engine oil consumeddepends on the viscosity of the oil, thequality of the oil and the conditionsthe vehicle is driven under.More oil is consumed by high–speed driv-ing and frequent acceleration and decel-eration.A new engine consumes more oil, sinceits pistons, piston rings and cylinder wallshave not become conditioned.When judging the amount of oil con-sumption, note that the oil may be-come diluted and make it difficult tojudge the true level accurately.As an example, if a vehicle is used for re-peated short trips, and consumes a nor-mal amount of oil, the dipstick may notshow any drop in the oil level at all, evenafter 1000 km (600 miles) or more. Thisis because the oil is gradually becomingdiluted with the fuel or moisture, making itappear that the oil level has not changed.

Facts about engine oilconsumption

Page 130: Owners Manual

122

The diluting ingredients evaporate outwhen the vehicle is then driven at highspeeds, as on an expressway, making itappear that oil is excessively consumedafter driving as high speeds.IMPORTANCE OF ENGINE OIL LEVELCHECKOne of the most important points in propervehicle maintenance is to keep the engineoil at the optimum level so that oil functionwill not be impaired. Therefore, it is essen-tial that the oil level be checked regularly.Toyota recommends that the oil level bechecked every time you refuel the vehicle.

Failure to check the oil levelregularly could lead to seriousengine trouble due to insufficientoil.

NOTICE

For detailed information on the oil levelcheck, see “Checking the engine oil level”in Chapter 7–2.

TANDEM MASTER CYLINDER BRAKESYSTEMThe tandem master cylinder brake sys-tem is a hydraulic system with two sepa-rate sub–systems. If either sub–systemshould fail, the other will still work. Howev-er, the pedal will be harder to press, andyour stopping distance will be longer.Also, the brake system warning light maycome on.

CAUTION!

Do not drive your vehicle with only asingle brake system. Have yourbrakes fixed immediately.

BRAKE BOOSTERThe brake booster uses engine vacuum topower–assist the brakes. If the engineshould quit while you are driving, you canbring the vehicle to a stop with normalpedal pressure. There is enough reservevacuum for one or two stops – but nomore!

CAUTION!

� Do not pump the brake pedal if theengine stalls. Each push on thepedal uses up your vacuum re-serve.

� Even if the power assist is com-pletely lost, the brakes will stillwork. But you will have to push thepedal hard—much harder t han nor-mal. And your braking distance willbe longer.

ANTI–LOCK BRAKE SYSTEMThe anti–lock brake system is designed toautomatically prevent lock–up of the wheelsduring sudden braking or braking on slip-pery road surfaces. This assists in providingdirectional stability and steering perfor-mance of the vehicle under these circum-stances.The anti–lock brake system becomes op-erative after the vehicle has accelerated toa speed in excess of approximately 10 km/h(6 mph). It stops operating when the vehicledecelerates to a speed below approximate-ly 5 km/h (3 mph).

Brake system

Page 131: Owners Manual

123

You may hear a sound in the enginecompartment for a few seconds when theengine is started or just after the vehicleis started. This means that the anti–lockbrake system is in the self check mode,and does not indicate a malfunction.

Effective way to press the “ABS” brakepedal: When the anti–lock brake system func-tion is in action, you may feel the brakepedal pulsating and hear a noise. In thissituation, to let the anti–lock brake sys-tem work for you, just hold the brakepedal down more firmly. Do not pumpthe brake. This will result in reducedbraking performance.

The brake pedal pulsation caused by theanti–lock brake system may indicate haz-ardous road surface conditions. Althoughthe anti–lock brake system assists in pro-viding vehicle control, it is still important todrive with all due care, because the anti–lock brake system cannot overcome thelaws of physics that act on your vehicle:� Braking capability is dependent on tire

friction with the road surface.

� Even though the anti–lock brake sys-tem is operating, a driver cannot main-tain full control on certain slippery roadsurfaces, when cornering at highspeeds, or in violent maneuvers.

� Avoid high speeds on wet roads. Theanti–lock brake system cannot elimi-nate the risk of hydroplaning and lossof tire friction.

Always maintain a safe distance from thevehicle in front of you. Compared with ve-hicles not fitted with an anti–lock brakesystem, your vehicle may require a longerstopping distance in the following cases:� Driving on rough, gravel or snow–cov-

ered roads.� Driving with tire chains installed.� Driving on roads where the road sur-

face is pitted or has other differencesin surface height.

“ABS” warning lightThis light comes on when the ignition keyis turned to the “ON” position. After about3 seconds, the light will go off.If either of the following conditions occurs,this indicates a malfunction somewhere inthe parts monitored by the warning lightsystem. Contact your Toyota dealer assoon as possible to service the vehicle.� The light does not come on as de-

scribed above, or remains on.� The light comes on while driving.

Page 132: Owners Manual

124

Even if the anti–lock brake system shouldfail, the brake system will still operate con-ventionally. However, when the ‘ABS’’warning light is on (and the brake systemwarning light is off), the anti–lock brakesystem is not assisting brake perfor-mance so that the wheels can lock–upduring sudden braking or braking on slip-pery road surfaces. Have your vehiclechecked by your Toyota dealer as soon aspossibleDRUM–IN–DISC TYPE PARKINGBRAKE SYSTEMYour vehicle has a drum–in–disc typeparking brake system. This type brakesystem needs bedding–down of the brakeshoes periodically or whenever the park-ing brake shoes and/or drums are re-placed.Have your Toyota dealer perform the bed-ding–down.

The brake pas wear limit indicators onyour disc brakes give a warning noisewhen the brake pads are worn towhere replacement is required.If you hear a squealing or scraping noisewhile driving, have the brake padschecked and replaced by your Toyotadealer as soon as possible. Expensive ro-tor damage can result if the pads are notreplaced when necessary.

When stowing luggage or cargo in or onthe vehicle, observe the following:� Put luggage or cargo in the luggage

compartment when at all possible. Besure all items are secured in place.

� Be careful to keep the vehicle bal-anced. Locating the weight as far for–ward as possible helps maintain bal–ance.

� For better fuel economy, do not carryunneeded weight.

CAUTION!

� To prevent luggage or packagesfrom sliding forward during brak-ing, do not stack anything in theluggage compartment higher thanthe seatbacks. Keep luggage orpackages low, as close to the flooras possible.

� Never allow anyone to ride in theluggage compartment. It is not de-signed for passengers. Theyshould ride in their seats with theirseat belts properly fastened. O ther-wise, they are much more likely suf-fer serious bodily injury, in theevent of sudden braking or a colli-sion.

Luggage storage precautionsBrake pad wear limit indicators

Page 133: Owners Manual

125

� Do not place anything on the flat-tened seat, or it may slide forwardduring braking.

� Do not drive with objects left on topof the instrument panel. They mayinterfere with the driver’s field ofview. Or they may move duringsharp vehicle acceleration or turn-ing, and impair the driver’s controlof the vehicle. In an accident theymay injure the vehicle occupants.

NOTICE

�Do not load the vehicle beyondthe vehicle capacity weight speci-fied in Part 8.

�If using a roof luggage carrier onsport roofs, avoid prolonged driv-ing on rough roads with heavyitems on the roof luggage carrier.

Some Toyotas are equipped with a limit-ed–slip differential. If one rear wheel be-gins to spin, the limited–slip differential isdesigned to aid traction by automaticallytransmitting driving force to the other rearwheel. If you are not sure whether yourvehicle is equipped with one, you can askyour Toyota dealer.

CAUTION!

Do not start or run the engine whileyour vehicle is supported by a jack.The vehicle could be driven off thejack and could pose a danger or re-sult in serious injury.

Use only a spare tire of the samesize, construction and load capacityas the original tires on your Toyotabecause damage to the limited–slipdifferential could possibly occurwith another type.

NOTICE

The vehicle identification number(VIN) is the legal identifier for your ve-hicle. This number is on the left top ofthe instrument panel, and can be seenthrough the windshield from outside.The vehicle identification number (VIN) isalso on the Certification Label.This is the primary identification numberfor your Toyota. It is used in registering theownership of your vehicle.

Limited–slip differential Your Toyota’s identification

Page 134: Owners Manual

126

The engine number is stamped on theengine block as shown

Your new vehicle carries theft preven-tion labels which are approximately 56mm (2.20 in.) by 16 mm (0.63 in.).The purpose of these labels is to reducethe incidence of vehicle thefts by facilitat-ing the tracing and recovery of parts fromstolen vehicles. The label is designed sothat once it is applied to a surface, any at-tempt to remove it will result in destroyingthe integrity of the label. Transferringthese labels intact from one part to anoth-er, will be impossible.

You should not attempt to removethe theft prevention labels as it mayviolate certain state or federal laws.

NOTICE

Theft prevention labels(except for Canada)

Page 135: Owners Manual

127

CAUTION!

Do not modify the suspension/chas-sis with lift kits, spacers, springs,etc. It can cause dangerous handlingcharacteristics resulting in loss ofcontrol.

Determine what kind of tires your ve-hicle is originally equipped with

1. Summer tires.Summer tires are high–speed capabilitytires best suited to highway driving underdry conditions.Since summer tires do not have the sametraction performance as snow tires, sum-mer tires are inadequate for driving onsnow–covered or icy roads. For driving onsnow–covered or icy roads, we recom-mend using snow tires. If installing snowtires, be sure to replace all four tires.2. All season tiresAll season tires are designed to providebetter traction in snow and to be adequatefor driving in most winter conditions, aswell as for use all year round.All season tires, however, do not have ad-equate traction performance comparedwith snow tires in heavy or loose snow.Also, all season tires fall short in accelera-tion and handling performance comparedwith summer tires in highway driving.

CAUTION!

� Do not mix summer and all seasontires on your vehicle as this cancause dangerous handling charac-teristics, resulting in loss of con-trol.

� Do not use tires other than themanufacturer’s designated tires,and do not mix tires or wheels ofthe sizes different from the original.

Suspension and chassis Types of tires

Page 136: Owners Manual

128

Page 137: Owners Manual

Part 3How to start the engine—(a) Before crankingBefore starting the engine

129

STARTING ANDDRIVING� Before starting the engine� How to start the engine� Precautions for turning off

engine with turbocharger� Tips for driving in various

conditions� Winter driving tips� Trailer towing� How to save fuel and make your

vehicle last longer, too

1. Check the area around the vehicle be-fore entering it.

2. Adjust seat position, seatback angleand steering wheel angle.

3. Adjust inside and outside rear viewmirrors.

4. Lock all doors.5. Fasten seat belts.

1. Apply the parking brake firmly.2. Turn off unnecessary lights and acces-

sories.3. Manual transmission: Press the

clutch pedal to the floor and shift thetransmission into neutral. Hold theclutch pedal to the floor until the engineis started. A starter safety device willprevent the starter from operating ifthe clutch pedal is not fully depressed.Automatic transmission: Put the se-lector lever in “P”. If you need to restartthe engine while the vehicle is moving,put the selector lever in “N”. A startersafety device will prevent the starterfrom operating if the selector lever is inany drive position.

4. Automatic transmission only: De-press the brake pedal and hold it to thefloor until driving off.

Page 138: Owners Manual

130

Before starting the engine, be sure to fol-low the instructions in “(a) Before crank-ing”.Normal starting procedureThe multiport fuel injection system/se-quential multiport fuel injection system inyour engine automatically controls theproper air–fuel mixture for starting. Youcan start a cold or hot engine as follows:1. With your foot off the accelerator ped-

al, crank the engine by turning the keyto “START”. Release it when the en-gine starts.

2. After the engine runs for about 10 sec-onds, you are ready to drive.

If the weather is below freezing, let the en-gine warm up for a few minutes beforedriving.If the engine stalls...Simply restart it, using the correct proce-dure given in normal starting.If the engine will not start–See “If your vehicle will not start” in Part 4.

�Do not crank for more than 30 sec-onds at a time. This may overheatthe starter and wiring systems.

�Do not race a cold engine.�If the engine becomes difficult to

start or stalls frequently, have theengine checked immediately.

NOTICE After high–speed or extended driving,etc., required a heavy engine load, the en-gine should be allowed to idle, as shownin the chart, before turning it off.

Driving condition and required idlingtime

Normal city drivingIdling time—Not necessary

High–speed driving About 80 km/h (50 mph)

Idling time—About 20 secondsAbout 100 km/h (63 mph)

Idling time—About 1 minute

Steep mountain slopes or continued driv-ingabove 100 km/h (63 mph)

Idling time—About 2 minutes

Never turn the engine offimmediately after a heavy load. Thismay cause severe engine damage.

NOTICE

(b) Starting the engine

Precautions for turning offan engine with turbocharger(2JZ–GTE engine)

Page 139: Owners Manual

131

� Always slow down in gusty cross-winds. This will allow you much bettercontrol

� Drive slowly onto curbs and, if pos-sible, at a right angle. Avoid drivingonto high, sharp–edged objects andother road hazards. Failure to do socan lead to severe tire damage result-ing in tire bursts.

� When parking on a hill, turn the frontwheels until they touch the curb so thatthe vehicle will not roll. Apply the park-ing brake, and place the transmissionin “P” (automatic) or in first or reverse(manual). If necessary, block thewheels.

� Washing your vehicle or drivingthrough deep water may get thebrakes wet. To see whether they arewet, check that there is no traffic nearyou, and then press the pedal lightly. Ifyou do not feel a normal braking force,the brakes are probably wet. To drythem, drive the vehicle cautiouslywhile lightly pressing the brake pedalwith the parking brake pulled. If theystill do not work safely, pull to the sideof the road and call a Toyota dealer forassistance.

CAUTION

� Before driving off, make sure thatthe parking brake if fully releasedand the parking brake reminderlight is off.

� Do not leave your vehicle unat-tended while the engine is run-ning.

� Do not rest your foot on the brakepedal while driving. It can causedangerous overheating, needlesswear, and poor fuel economy.

� To drive down a long or steep hill,reduce your speed and downshift.Remember, if you ride the brakesexcessively, they may overheatand not work properly.

� Be careful when accelerating, up-shifting, downshifting or brakingon a slippery surface. Sudden ac-celeration or engine braking,could cause the vehicle to spin orskid.

!� Do not drive in excess of the speed

limit. Even if the legal speed limitpermits it, do not drive over 140km/h (85 mph) unless your vehiclehas high–speed capability tires.Driving over 140 km/h (85 mph)may result in tire failure, loss ofcontrol and possible injury. Besure to consult a tire dealer to de-termine whether the tires on yourvehicle are high–speed capabilitytires or not before driving at suchspeeds.

� Do not continue normal drivingwhen the brakes are wet. If they arewet, your vehicle will require a lon-ger stopping distance, and it maypull to one side when the brakesare applied. Also, the parkingbrake will not hold the vehicle se-curely.

Tips for driving in variousconditions

Page 140: Owners Manual

132

Make sure you have ethylene–glycolantifreeze in the radiator.

Do not use alcohol type antifreeze.NOTICE

Check the condition of the battery andcables.Cold temperatures reduce the capacity ofany battery, so it must be in top shape toprovide enough power for winter starting.Chapter 7–3 tells you how to visually in-spect the battery. Your Toyota dealer andmost service stations will be pleased tocheck the level of charge.Make sure the engine oil viscosity issuitable for the cold weather.See Chapter 7–2 for recommended vis-cosity. Leaving a heavy summer oil in yourvehicle during winter months may causeharder starting. If you are not sure aboutwhich oil to use, call your Toyota dealer–he will be pleased to help.Keep the door locks from freezing.Squirt lock de–icer or glycerine into thelocks to keep them from freezing. To opena frozen lock, try heating the key before in-serting it.

Use a washer fluid containing an anti-freeze solution.This product is available at your Toyotadealer and most auto parts stores. Followthe manufacturer’s directions for howmuch to mix with water.

Do not use engine antifreeze or anyother substitute as washer fluidbecause it may damage yourvehicle’s paint.

NOTICE

Do not use your parking brake whenthere is a possibility it could freeze.When parking, put the transmission into“P” (automatic) or into first or reverse(manual) and block the rear wheels. Donot use the parking brake, or snow or wa-ter accumulated in and around the parkingbrake mechanism may freeze, making ithard to release.Keep ice and snow from accumulatingunder the fenders.Ice and snow built up under your fenderscan make steering difficult. During badwinter driving, stop and check under thefenders occasionally.

Depending on where you are driving,we recommend you carry some emer-gency equipment.Some of the things you might put in the ve-hicle are tire chains, window scraper, bagof sand or salt, flares, small shovel, jump-er cables, etc.

Winter driving tips

Page 141: Owners Manual

133

Toyota does not recommend towing atrailer with your Supra. It is not designedfor trailer towing.

Getting more kilometers/mileage from a li-ter/gallon of fuel is easy–just take it easy.It will help make your vehicle last longer,too. Here are some specific tips on how tosave money on both fuel and repairs:� Keep your tires inflated at the cor-

rect pressure. Underinflation causestire wear and wastes fuel. See Chapter7–2 for instructions.

� Do not carry unneeded weight inyour vehicle. Excess weight puts aheavier load on the engine, causinggreater fuel consumption.

� Avoid lengthy warm–up idling.Once the engine is running smoothly,begin driving—but gently. Remember,however, that on cold winter days thismay take a little longer.

� Accelerate slowly and smoothly.Avoid jackrabbit starts. Get into highgear as quickly as possible.

� Avoid long engine idling. If you havea long wait and you are not in traffic, itis better to turn off the engine and startagain later.

� Avoid engine lug or overrevving.Use a gear position suitable for theroad on which you are travelling.

� Avoid continuous speeding up andslowing down. Stop–and–go drivingwastes fuel.

� Avoid unnecessary stopping andbraking. Maintain a steady pace. Tryto time the traffic signals so you onlyneed to stop as little as possible or takeadvantage of through streets to avoidtraffic lights. Keep a proper distancefrom other vehicles to avoid suddenbraking. This will also reduce wear onyour brakes.

� Avoid heavy traffic or traffic jamswhenever possible.

� Do not rest your foot on the clutchor brake pedal. This causes needlesswear, overheating and poor fuel econ-omy.

� Maintain a moderate speed onhighways. The faster you drive, thegreater the fuel consumption. By re-ducing your speed, you will cut downon fuel consumption.

� Keep the front wheels in properalignment. Avoid hitting the curb andslow down on rough roads. Improperalignment not only causes faster tirewear but also puts an extra load on theengine, which, in turn, wastes fuel.

How to save fuel and makeyour vehicle last longer, tooTrailer towing

Page 142: Owners Manual

134

� Keep the bottom of your vehiclefree from mud, etc. This not onlylessens weight but also helps preventcorrosion.

� Keep your vehicle tuned–up and intop shape. A dirty air cleaner, improp-er valve clearance, dirty plugs, dirty oiland grease, brakes not adjusted, etc.all lower engine performance and con-tribute to poor fuel economy. For lon-ger life of all parts and lower operatingcosts, keep all maintenance work onschedule, and if you often drive undersevere conditions, see that your ve-hicle receives more frequent mainte-nance (For scheduled maintenance in-formation, please refer to the separate“Owner’s Manual Supplement/Main-tenance Schedule”).

CAUTION

Never turn off the engine to coastdown hills. Your power steering andbrake booster will not function with-out the engine running. Also, theemission control system operatesproperly only when the engine isrunning.

!

Page 143: Owners Manual

Part 4If your vehicle will not start—(a) Simple checks

135

IN CASE OF ANEMERGENCY� If your vehicle will not start� If your engine stalls while

driving� If your vehicle overheats� If you have a flat tire� If your vehicle needs to be

towed� If you cannot shift automatic

transmission selector lever� If you lose your keys

Before making these checks, make sureyou have followed the correct starting pro-cedure given in “How to start the engine”in Part 3 and that you have sufficient fuel.If the engine is not turning over or isturning over too slowly—1. Check that the battery terminals are

tight and clean.2. If the battery terminals are O.K.,

switch on the interior light.3. If the light is out, dim or goes out when

the starter is cranked, the battery isdischarged. You may try jump starting.See “(c) Jump starting” for further in-structions.

If the light is O.K., but the engine still willnot start, it needs adjustment or repair.Call a Toyota dealer or qualified repairshop.

NOTICE

Do not pull— or push–start thevehicle. It may damage the vehicleor cause a collision when the enginestarts. Also the three–way catalyticconverter may overheat andbecome a fire hazard.

If the engine turns over at its normalspeed but will not start—1. 2JZ–GE engine only—Check that all

the push–on connectors are tight. (Forexample, connections at the sparkplugs, ignition coil and/or distributor)

2. If the connectors are O.K., the enginemay be flooded because of repeatedcranking. See “(b) Starting a floodedengine” for further instructions.

Page 144: Owners Manual

136

If the engine will not start, your enginemay be flooded because of repeatedcranking.If this happens, turn the key to “START”with the accelerator pedal held down.Keep the key and accelerator pedal so for15 seconds and release them. Then trystarting the engine with your foot off theaccelerator pedal.If the engine does not start after 15 sec-onds of cranking, release the key, wait afew minutes and try again.If the engine still will not start, it needs ad-justment or repair. Call a Toyota dealer orqualified repair shop for assistance.

NOTICE

Do not crank for more than 30seconds at a time. This mayoverheat the starter and wiringsystems.

To avoid serious personal injury anddamage to your vehicle which mightresult from battery explosion, acidburns, electrical burns, or damagedelectronic components, these instruc-tions must be followed precisely.If you are unsure about how to follow thisprocedure, we strongly recommend thatyou seek the help of a competent me-chanic or towing service.

� Batteries contain sulfuric acidwhich is poisonous and corrosive.Wear protective safety glasseswhen jump starting, and avoidspilling acid on your skin, cloth-ing, or vehicle.

� If you should accidentally get acidon yourself or in you eyes, removeany contaminated clothing andflush the affected area with waterfor at least 15 minutes. Then getimmediate medical attention. Ifpossible, continue to apply waterwith a sponge or cloth while enroute to the medical office.

CAUTION!

� The gas normally produced by abattery will explode if a flame orspark is brought near. Use onlystandardized cables and do notsmoke or light a match while jumpstarting.

NOTICE

The battery used for boosting mustbe 12 V. Do not jump start unlessyou are sure that the booster batteryis correct.

(b) Starting a flooded engine (c) Jump starting

Page 145: Owners Manual

137

JUMP STARTING PROCEDURE1. If the booster battery is installed in

another vehicle, make sure the ve-hicles are not touching. Turn off all un-necessary lights and accessories.

2. If required, remove all the vent plugsfrom the booster and discharged bat-teries. Lay a cloth over the open ventson the batteries. (This helps reducethe explosion hazard, personal injuriesand burns.)

3. If the engine in the vehicle with thebooster battery is not running, start itand let it run for a few minutes. Duringjump starting, run the engine at about2000 rpm with the accelerator pedallightly depressed.

4. Make the cable connection in the ordera, b, c, d.

a. Connect the clamp of the positive (red)jumper cable to the positive (+) termi-nal on the discharged battery.

b. Connect the clamp at the other end ofthe positive (red) jumper cable to thepositive (+) terminal on the boosterbattery.

c. Connect the clamp of the negative(black) jumper cable to the negative(–) terminal on the booster battery.

d. Connect the clamp at the other end ofthe negative (black) jumper cable to asolid, stationary, unpainted, metallicpoint of the vehicle with the dischargedbattery.The recommended connecting pointsare shown in the following illustrations:

Page 146: Owners Manual

138

Do not connect the cable to or near anypart that moves when the engine iscranked.

When making the connections, toavoid serious injury, do not leanover the battery or accidentally letthe jumper cables or clamps touchanything except the correct batteryterminals or the ground.

CAUTION!

5. Start your engine in the normal way.After starting, run it at about 2000 rpmfor several minutes with the accelera-tor pedal lightly depressed.

6. Carefully disconnect the cables in theexact reverse order: the negativecable and then the positive cable.

7. Carefully dispose of the battery covercloths—they may now contain sulfuricacid.

8. If removed, replace all the battery ventplugs.

If the cause of your battery discharging isnot apparent (for example, lights left on),you should have it checked.

If your engine stalls while driving…1. Reduce your speed gradually, keeping

a straight line. Move cautiously off theroad to a safe place.

2. Turn on your emergency flashers.3. Try starting the engine again.If the engine will not start, see “If your ve-hicle will not start”.

If the engine is not running, thepower assist for the brakes andsteering will not work so steeringand braking will be much harderthan usual.

CAUTION!

If your engine stalls whiledriving

Page 147: Owners Manual

139

If your engine coolant temperaturegauge indicates overheating, if youexperience a loss of power, or if youhear a loud knocking or pinging noise,the engine has probably overheated.You should follow this procedure …1. Pull safely off the road, stop the ve-

hicle and turn on your emergencyflashers. Put the transmission in “P”(automatic) or neutral (manual) andapply the parking brake. Turn off theair conditioning if it is being used.

2. I coolant or steam is boiling out of theradiator or reservoir, stop the engine.Wait until the steam subsides beforeopening the hood. If there is no coolantboiling over or steam, leave the enginerunning.

To help avoid personal injury, keepthe hood closed until there is nosteam. Escaping steam or coolant isa sign of very high pressure.

CAUTION!

3. Visually check to see if the enginedrive belt (fan belt) is broken or loose.Look for obvious coolant leaks fromthe radioator, hoses, and under the ve-hicle. However, note that water drain-ing from the air conditioning is normalif it has been used.

When the engine is running, keephands and clothing away from themoving fan and engine drive belts.

CAUTION!

4. If the engine drive belt is broken or thecoolant is leaking, stop the engine im-mediately. Call a Toyota dealer for as-sistance.

5. If the engine drive belt is O.K. andthere are no obvious leaks, you mayhelp the engine cool down more quick-ly by running it at about 1500 rpm fora few minutes with the acceleratorpedal lightly depressed.

6. Check the coolant reservoir. If it is dry,add coolant to the reservoir while theengine is running. Fill it about half full.

Do not attempt to remove theradiator cap when the engine andradiator are hot. Serious injurycould result from scalding hot fluidand steam blown out underpressure.

CAUTION!

7. After the engine coolant temperaturehas cooled to normal, again check thecoolant level in the reservoir. Ifnecessary, bring it up to half full again.Serious coolant loss indicates a leak inthe system. You should have itchecked as soon as possible at yourToyota dealer.

If your vehicle overheats

Page 148: Owners Manual

140

1. Reduce your speed gradually, keepinga straight line. Move cautiously off theroad to a safe place well away from thetraffic. Avoid stopping on the center di-vider of a highway. Park on a level spotwith firm ground.

2. Stop the engine and turn on youremergency flashers.

3. Firmly set the parking brake and putthe transmission in “P” (automatic) orreverse (manual).

4. Have everyone get out of the vehicleon the side away from traffic.

5. Read the following instructions thor-oughly.

When jacking, be sure to observethe following to reduce the poss–ibility of personal injury:� Follow jacking instructions.� Use a jack only for lifting your ve-

hicle during wheel changing.� Never get beneathe the vehicle

when supported by a jack� Do not start or run the engine

while your vehicle is supported bya jack.

CAUTION!

NOTICE

Do not continue driving with adeflated tire. Driving even a shortdistance can damage a tire beyondrepair.

Compact spare tire

The compact spare tire is designed fortemporary emergency use only.The compact spare tire is identified by thedistinctive wheel design and color andspecial wording “TEMPORARY USEONLY” molded into the side wall of the tire.The standard tire should be repaired andreplaced as soon as possible.To keep the compact spare tire notice-able, do not hide the wheel by a wheelcover or such.

If you have a flat tire—

Page 149: Owners Manual

141

The compact spare tire saves space inyour luggage compartment, and its lighterweight helps to improve fuel economy andpermits easier installation in case of a flattire.The compact spare tire can be used manytimes, if necessary. It has tread life of upto 4800 km (3000 miles) depending onroad conditions and your driving habits.When tread wear indicators appear on thetire, replace the tire.See also the tire section in Chapter 7–2 fordetails on the tread wear indicators andother service information.

� The compact spare tire was de-signed especially for your Toyota.Do not use it on any other vehicle.

� Do not exceed 80 km/h (50 mph)when driving with the compactspare tire.

CAUTION!

NOTICE

Your ground clearance is reducedwhen the compact spare tire isinstalled so avoid driving overobstacles and drive slowl on rough,unpaved roads and speed bumps.Also, do not attempt to go throughan automatic car wash as thevehicle may get cauthe, resulting indamage.

1. Get the wheel nut wrench, jack, jackhandle and spare tire.

To prepare yourself for an emergency,you should familiarize yourself with theuse of the jack, each of the tools and theirstorage locations.

—Required tools and spare tire

Page 150: Owners Manual

142

To remove the jack, loosen the bolt and re-move it.When storing the jack, secure it by follow-ing removal step in reverse order to pre-vent it from flying forward during a colli-sion or sudden braking.

To remove the spare tire:1. Remove the spare tire cover.2. Loosen the bolt and remove it.When storing the spare tire, put it in placewith the outer side of the wheel facing up.Then secure the tire by repeating theabove removal steps in reverse order toprevent it from flying forward during a col-lision or sudden braking.

2. Block the wheel diagnoally oppo-site the flat tire to keep the vehiclefrom rolling when it is jacked up.

When blocking the wheel, place a wheelblock from the front for the front wheels orfrom the rear for the rear wheels.

—Blocking the wheel

Page 151: Owners Manual

143

3. Remove the wheel ornament.Pry off the wheel ornament, using the bev-eled end of the wheel nut wrench asshown.

Do not try to pull the ornament byhand. Take due care in handling theornament to avoid unexpectedpersonal injury.

CAUTION!

4. Loosen all the wheel nuts.Always loosen the wheel nuts before rais-ing the vehicle.The nuts turn counterclockwise to loosen.To get maximum leverage, fit the wrenchto the nut so that the handle is on the rightside, as shown above. Grab the wrenchnear the end of the handle and pull up onthe handle. Be careful that the wrenchdoes not slip off the nut.Do not remove the nuts yet—just unscrewthem about one–half turn.

5. Position the jack at the correct jackpoints as shown

Make sure the jack is positioned on a leveland solid place.

—Removing wheel ornament —Positioning the jack—Loosening wheel nuts

Page 152: Owners Manual

144

6. After making sure that no one is inthe vehicle, raise it high enough sothat the spare tire can be installed.

Remember you will need more groundclearance when putting in the spare tirethan when removing the flat tire.To raise the vehicle, insert the jack handleinto the jack (it is a loose fit) and turn itclockwise. As the jack touches the vehicleand begins to lift, double–check that it isproperly positioned.

Never get under the vehicle whenthe vehicle is supported by the jackalone.

CAUTION!

7. Remove the wheel nuts and changetires.

Lift the flat tire straight off and put it aside.Roll the spare wheel into position andalign the holes in the wheel with the bolts.Then lift up the wheel and get at least thetop bolt started through its hole. Wigglethe tire and press it back over the otherbolts.

Before putting on wheels, remove anycorrosion on the mounting surfaces with awire brush or such. Installation of wheelswithout good metal–to–metal contact atthe mounting surface can cause wheelnuts to loosen and eventually cause awheel to come off while driving. Thereforeafter the first 1600 km (1000 miles), checkto see that the wheel nuts are tight.

—Raising your vehicle —Changing wheels

Page 153: Owners Manual

145

8. Reinstall all the wheel nuts fingertight.

Reinstall the wheel nuts and tighten themas much as you can by hand. Press backon the tire back and see if you can tightenthem more.

9. Lower the vehicle completely andtighten the wheel nuts.

Turn the jack handle counterclockwise tolower the vehicle.Use only the wheel nut wrench to tightenthe nuts. Do not use other tools or anyadditional leverage other than yourhands, such as a hammer, pipe or yourfoot. Make sure the wrench is securely en-gaged over the nut.Tighten each nut a little a time in the ordershown. Repeat the process until all thenuts are tight.

10. Reinstall the wheel ornament.Put the wheel ornament into position andthen tap it firmly with the side or heal ofyour hand to snap it into place.

Take due care in handling theornament to avoid unexpectedpersonal injury.

CAUTION!

—Lowering your vehicle —Reinstalling wheel ornament—Reinstalling wheel nuts

Page 154: Owners Manual

146

11. Check the air pressure of the re-placed tire.

Adjust the air pressure to the specificationdesignated in Part 8. If the pressure islower, drive slowly to the nearest servicestation and fill to the correct pressure.Do not forget to reinstall the tire inflationvalve cap as dirt and moisture could getinto the valve core and possibly cause airleakage. If the cap is missing, have a newone put on as soon as possible.12. Restow all the tools, jack and flat

tire securely.As soon as possible after changingwheels, tighten the wheel nuts to thetorque specified in Part 8 with a torquewrench, have a technician repair the flattire and replace the spare tire with it.

Before driving, make sure all thetools, jack and flat tire are securelyin place in their storage location toreduce the possibility of personalinjury during a collision or suddenbraking.

CAUTION!

If towing is necessary, we recommendyou to have it done by your Toyotadealer or a commercial tow truck ser-vice. In consultation with them, haveyour vehicle towed using either (a) or(b).Only when you cannot receive a tow-ing service from a Toyota dealer orcommercial tow truck service, towyour vehicle carefully in accordancewith the instructions given in“—Emergency towing” in this part.Proper equipment will help ensure thatyour vehicle is not damaged while beingtowed. Commercial operators are gener-ally aware of the state/provincial and locallaws pertaining to towing.Your vehicle can be damaged if it is towedincorrectly. Although most operatorsknow the correct procedure, it is possibleto make a mistake. To avoid damage toyour vehicle, make sure the following fewprecautions are observed. If necessary,show this page to the tow truck driver.TOWING PRECAUTIONS:Use a safety chain system for all towing,and abide by the state/provincial and locallaws. The wheels and axle on the groundmust be in good condition. If they aredamaged, use a towing dolly.

If your vehicle needs to betowed——After changing wheels

Page 155: Owners Manual

147

(a) Towing with wheel lift type truckFrom front —� Manual transmission:

We recommend using a towing dollyunder the front wheels. If you do notuse a towing dolly, place the ignitionkey in the “ACC” position and put thetransmission in neutral.

� Automatic transmission:Use a towing dolly under the frontwheels.

NOTICE

Never tow a vehicle with anautomatic transmission from therear with the front wheels on theground, as this may cause seriousdamage to the transmission.

From rear —Place the ignition key in the“ACC” position.

NOTICE

�When lifting wheels, take care toensure adequate ground clear-ance for towing at the oppositeend of the raised vehicle. Other-wise, the bumper and/or under-body of the towed vehicle will bedamaged during towing.

�Do not tow with the key removedor in the “LOCK” position, as thesteering lock mechanism is notstrong enough to hold the frontwheels straight while towing.

(b) Using flat bed truck

(c) Towing with sling type truck

NOTICE

Do not tow with sling type truck,either from the front or rear. Thismay cause body damage.

Page 156: Owners Manual

148

If towing is necessary, we recommendyou to have it done by your Toyotadealer or a commercial tow truck ser-vice.If towing service is not available in anemergency, your vehicle may be tem-porarily towed by a cable or chain se-cured to either emergency towing eye-let under the vehicle. Use extremecaution when towing vehicle.A driver must be in the vehicle to steer itand operate the brakes.

Towing in this manner may be done onlyon hard–surfaced roads for a short dis-tance and at low speeds. Also, thewheels, axles, drive train, steering andbrakes must all be in good condition.

CAUTION!

Use extreme caution when towingvehicles. Avoid sudden starts orerratic driving maneuvers whichwould place excessive stress on theemergency towing eyelet andtowing cable or chain. The eyeletand towing cable or chain maybreak and cause serious injury ordamage.

NOTICE

Use only a cable or chainspecifically intended for use intowing vehicles. Securely fasten thecable or chain to the towing eyeletprovided.

Before towing, release the parking brakeand put the transmission in neutral(manual) or “N” (automatic). The key mustbe in “ACC” (engine off) or “ON” (enginerunning).

CAUTION!

If the engine is not running, thepower assist for the brakes andsteering will not work so steeringand braking will be much harderthan usual.

—Emergency towing

Page 157: Owners Manual

149

If you cannot shift the selector leverout of “P” position to other positionseven though the brake pedal is de-pressed, use the shift lock overridebutton as follows:

1. Turn the ignition key to “LOCK”position. Make sure the parkingbrake is on.

2. Pry up the cover with a flat–bladedscrewdriver or equivalent.

3. Insert the screwdriver or equivalentinto the hole to push down the shiftlock override button. You can shiftout of “P” position only while push-ing the button.

4. Shift into “N” position.

5. Insert the cover.

6. Start the engine. For your safety,keep the brake pedal depressed.

Be sure to have the system checked byyour Toyota dealer as soon as possible.

Many Toyota dealers can make a newkey if you can give them the key num-ber.See the suggestion given in “Keys” inChapter 1–2.If your keys are locked in the vehicle andyou cannot get a duplicate, many Toyotadealers can still open the door for you, us-ing their special tools. If you must break awindow to get in, we suggest breaking thesmallest side window because it is theleast expensive to replace. Be extremelycautious to avoid cuts from the glass.

If you cannot shift automatictransmission selector lever If you lose your keys

Page 158: Owners Manual

150

Page 159: Owners Manual

Part 5Protecting your Toyota fromcorrosion

151

CORROSIONPREVENTION ANDAPPEARANCECARE� Protecting your Toyota from

corrosion� Washing and waxing your

Toyota� Cleaning the interior

Toyota, through its diligent research, de-sign and use of the most advancedtechnology available, has done its part tohelp prevent corrosion and has providedyou with the finest quality vehicleconstruction. Now, it is up to you. Propercare of your Toyota can help ensure long–term corrosion prevention.The most common causes of corro-sion to your vehicle are:� The accumulation of road salt, dirt and

moisture in hard–to–reach areas un-der the vehicle.

� Chipping of paint, or undercoatingcaused by minor accidents or bystones and gravel.

Care is especially important if you livein particular areas or operate your ve-hicle under certain environmentalconditions:� Road salt or dust control chemicals will

accelerate corrosion, as will the pres-ence of salt in the air near the sea–coast or in areas of industrial pollution.

� High humidity accelerates corrosionespecially when temperatures rangejust above the freezing point.

� Wetness or dampness to certain partsof your vehicle for an extended periodof time, may cause corrosion eventhough other parts of the vehicle maybe dry.

� High temperatures will cause corro-sion to those components of the ve-hicle which are prevented from quick–drying due to lack of proper ventilation.

The above signifies the necessity to keepyour vehicle, particularly the underside,as clean as possible and to repair anydamage to paint or protective coatings assoon as possible.To help prevent corrosion on yourToyota, follow these guidelines:Wash your vehicle frequently: It is, ofcourse, necessary to keep your vehicleclean by regular washing, but to preventcorrosion, the following points should beobserved:� If you drive on salted roads in the win-

ter or if you live near the ocean, youshould hose off the undercarriage atleast once a month to minimize corro-sion.

Page 160: Owners Manual

152

� High pressure water or steam is effec-tive for cleaning the vehicle’s under-side and wheel housings. Pay particu-lar attention to these areas as it isdifficult to see all the mud and dirt. Itwill do more harm than good to simplywet the mud and debris without remov-ing them. The lower edge of doors,rocker panels and frame membershave drain holes which should not beallowed to clog with dirt as trapped wa-ter in these areas can cause corrosion.

� Wash the underside of the vehiclethoroughly when winter is over.

See “Washing and waxing your Toyota”for more tips.Check the condition of your vehicle’spaint and trim. If you find any chips orscratches in the paint, touch them up im-mediately to prevent corrosion from start-ing. If the chips or scratches have gonethrough the bare metal, have a qualifiedbodyshop make the repair.

Check the interior of your vehicle. Wa-ter and dirt can accumulate under the floormats and could cause corrosion. Occa-sionally check under the mats to makesure the area is dry. Be particularly carefulwhen transporting chemicals, cleansers,fertilizers, salt, etc; these should be trans-ported in proper containers. If a spill orleak should occur, immediately clean anddry the area.Use mud shields on your wheels. If youdrive on salted or gravel roads, mudshields help protect your vehicle. Full–size shields, which come as near to theground as possible, are the best. We rec-ommend that the fittings and the areawhere the shields are installed be treatedto resist corrosion. Your Toyota dealer willbe happy to assist in supplying and instal-ling the shields if they are recommendedfor your area.Do not park your vehicle in a damp,poorly ventilated garage. If you washyour vehicle in the garage, or if you driveit in covered with water or snow, your ga-rage may be so damp it will cause corro-sion. Even if your garage is heated, a wetvehicle can corrode if the ventilation ispoor.

Washing your Toyota by handWork in the shade and wait until the ve-hicle body is not hot to the touch.

CAUTION

When cleaning under floor or chas-sis, be careful not to injure yourhands.

!

1. Rinse off loose dirt with a hose. Re-move any mud or road salt from theunderside of the vehicle or in the wheelwells.

2. Wash with a mild car–wash soap,mixed according to the manufacturer’sinstructions. Use a soft cotton mitt andkeep it wet by dipping it frequently intothe wash water. Do not rub hard–letthe soap and water remove the dirt.

Aluminum wheels: Use only a mild soap orneutral detergent.Plastic bumpers: Wash carefully. Do notscrub with abrasive cleaners. The bumperfaces are soft.Road tar: Remove with turpentine orcleaners that are marked safe for paintedsurfaces.

Washing and waxing yourToyota

Page 161: Owners Manual

153

Do not use gasoline or strongsolvents, which may be toxic orcause damage.

NOTICE

3. Rinse thoroughly — dried soap cancause streaking. In hot weather youmay need to rinse each section rightafter you wash it.

4. To prevent water spots, dry the vehicleusing a clean soft cotton towel. Do notrub or press hard — you might scratchthe paint.

Automatic car washYour vehicle may be washed in an auto-matic car wash, but remember that thepaint can be scratched by some type ofbrushes, unfiltered washing water, or thewashing process itself. Scratching re-duces paint durability and gloss, especial-ly on darker colors. Also, automatic carwash equipment may interfer with a dam-age the rear spoiler if your vehicle isequipped with one. The manager of thecar wash should be able to advise youwhether the process is safe for the painton your vehicle or the vehicle body itself.

To prevent damage to the antenna,make sure it is retracted beforedriving your Toyota through anautomatic car wash.

NOTICE

Waxing your Toyota

Polishing and waxing is recommend–ed to maintain the original beauty ofyour Toyota’s finish.1. Always wash and dry the vehicle be-

fore you begin waxing, even if you areusing a combined cleaner and wax.

2. Use a good quality polish and wax. Ifthe finish has become extremelyweathered, use a car–cleaning polish,followed by a separate wax. Carefullyfollow the manufacturer’s instructionsand precautions. Be sure to polish andwax the chrome trim as well as thepaint.

3. Wax the vehicle again when waterdoes not bead but remains on the sur-face in large patches.

Always remove the plastic bumpersif your vehicle is re–painted andplaced in a high heat paint waxingbooth. High temperatures coulddamage the bumpers.

NOTICE

Page 162: Owners Manual

154

CAUTION

Do not wash the vehicle floor withwater, or allow water to get into thefloor when cleaning the vehicle in-terior or exterior. Water may get intoaudio components or other electri-cal components above or under thefloor carpet (or mat) and cause amalfunction; and it may cause bodycorrosion.

!

Vinyl interior

The vinyl upholstery may be easilycleaned with a mild soap or detergentand water.First vacuum over the upholstery to re-move loose dirt. Then, using a sponge orsoft cloth, apply the soap solution to the vi-nyl. After allowing it to soak in for a fewminutes to loosen the dirt, remove the dirtand wipe off the soap with a clean dampcloth. If all the dirt does not come off, re-peat the procedure. Commercial foam-ing–type vinyl cleaners are also availablewhich work well. Follow the manufactur-er’s instructions.

Do not use solvent, thinner,gasoline or window cleaner on theinterior.

NOTICE

Carpets

Use a good foam–type shampoo toclean the carpets.Begin by vacuuming thoroughly to re-move as much dirt as possible. Severaltypes of foam cleaners are available’some are in aerosol cans and others arepowders or liquids which you mix with wa-ter to produce a foam. To shampoo thecarpets, use a sponge or brush to applythe foam. Rub in overlapping circles.Do not apply water – the best results areobtained by keeping the carpet as dry aspossible. Read the shampoo instructionsand follow them closely.Seat belts

The seat belts may be cleaned withmild soap and water or with lukewarmwater.Use a cloth or sponge. As you are clean-ing, check the belts for excessive wear,fraying, or cuts.

Do not use dye or bleach on thebelts–it may weaken them.

NOTICE

Windows

The windows may be cleaned with anyhousehold window cleaner.

When cleaning the inside of thewindows, be careful not to scratchor damage the heater wires on therear window.

NOTICE

Air conditioning control panel, car au-dio, instrument panel, console panel,and switches

Use a soft damp cloth for cleaning.Soak a clean soft cloth in water or luke–warm water then lightly wipe off any dirt.

Cleaning the interior

Page 163: Owners Manual

155

�Do not use organic substances(solvents, karosene, alcohol, gas-oline, etc.) or alkaline or acidicsolutions. These chemicals cancause discoloring, staining orpeeling of the surface.

�If you use cleaners or polishingagents, make sure their ingredi-ents do not include the sub-stances mentioned above.

�If you use a liquid car freshener,do not apply the liquid onto the ve-hicle’s interior surfaces. It maycontain the ingredients men-tioned above. Immediately cleanany spill using the method men-tioned above.

NOTICE

Leather InteriorThe leather uphostery may be cleanedwith neutral detergent for wool.Remove dirt using a soft cloth dampenedwith 5 % Solution of neutral detergent forwoll. Then throughly wipe off all traces ofdetergent with a clean damp cloth.After cleaning or whenever any part of theleather gets wet, dry with a soft cleancloth. Allow the leather to dry in a vente-lated shaded area.

�If a stain should fail to come outwith a neutral detergent, apply acleaner that does not contain anorganic solvent.

�Never use organic substancessuch as benzine, alcohol or gaso-line, or alkaline or acid solutionsfor cleaning the leather as thesecould cause discoloring.

�Use of a nylon brush or syntheticfiber cloth, etc. may scratch thefine grained surface of the leather.

�Mildew may develop on soiledleather upholstery. Be sepeciallycareful to avoid oil spots. Try tokeep your upholstery alwaysclean.

�Long exposure to direct sunlightmay cause the leather surface toharden a shrink. Keep your ve-hicle in a shaded area, especiallyin the summer.

�The interior of your vehicle is aptto heat up on hot summer days, soavoid placing on the upholsteryitems made of vinyl or plastic orcontaining wax as these tend tostick to leather when warm.

NOTICE �Improper cleaning of the leatherupholstery could result in discol-oration or staining.

If you have any questions about thecleaning of your Toyota, your localToyota dealer will be pleased toanswer them.

Page 164: Owners Manual

156

Page 165: Owners Manual

Part 6 Maintenance requirements

157

VEHICLEMAINTENANCE ANDCARE� Maintenance requirements� General maintenance� Does your vehicle need

repairing?

For scheduled maintenance infor-mation, please refer to the sep-arate “Owner’s Manual Sup-plement/Maintenance Schedule”.

Your Toyota vehicle has been designedfor fewer maintenance requirements withlonger service intervals to save both yourtime and money. However, each regularmaintenance, as well as day–to–daycare, is more important than ever beforeto ensure smooth, trouble–free, safe, andeconomical drivings.It is the owner’s responsibility to makesure the specified maintenance, includinggeneral maintenance service, is per-formed. Note that both the new vehicleand emission control system warrantiesspecify that proper maintenance and caremust be performed. See Owner’s Guide,Owner’s Manual Supplement or WarrantyBooklet for complete warranty informa-tion.General maintenanceGeneral maintenance items are thoseday–to–day care practices that are impor-tant to your vehicle for proper operation.It is the owner’s responsibility to ensurethat the general maintenance items areperformed regularly.These checks or inspections can be doneeither by yourself or a qualified technician,or if you prefer, your Toyota dealer will bepleased to do them at a nominal cost.

Scheduled maintenanceThe scheduled maintenance items listedin the “Owner’s Manual Supplement” arethose required to be serviced at regular in-tervals.For details of your maintenance Sched-ule, read the separate ”Owner’s ManualSupplement/Maintenance Schedule”.It is recommended that any replace-ment parts used for maintenance orfor the repair of the emission controlsystem be Toyota supplied.The owner may elect to use non–Toyo-ta supplied parts for replacement pur-poses without invalidating the emis-sion control system warranty. Howev–er, use of replacement parts which arenot of equivalent quality may impairthe effectiveness of the emission con-trol systems.You may also elect to have mainte-nance, replacement, or repair of theemission control devices and systemperformed by any automotive repairestablishment or individual withoutinvalidating this warranty. See Own-er’s Guide, Owner’s Manual Supple-ment or Warranty Booklet for completewarranty information.

Page 166: Owners Manual

158

Where to go for service?Toyota technicians are well–trained spe-cialists and are kept up to date with the lat-est service information through technicalbulletins, service tips, and in–dealershiptraining programs. They learn to work onToyotas before they work on your vehicle,rather than while they are working on it.You can be confident that your Toyotadealer’s service department performs thebest job to meet the maintenance require-ments on your vehicle—reliably and eco-nomically.Your copy of the repair order is proof thatall required maintenance has been per-formed for warranty coverage. And if anyproblems should arise with your vehiclewhile under warranty, your Toyota dealerwill promptly take care of it. Again, be sureto keep a copy of the repair order for anyservice performed on your Toyota.

What about do–it–yourself mainte-nance?Many of the maintenance items are easyto do yourself if you have a little mechani-cal ability and a few basic automotivetools. Simple instructions for how to per-form them are presented in Part 7.If you are a skilled do–it–yourself me-chanic, the Toyota service manuals arerecommended. Please be aware that do–it–yourself maintenance can affect yourwarranty coverage. See Owner’s Guide,Owner’s Manual Supplement or WarrantyBooklet for the details.

Listed below are the general maintenanceitems that should be performed as fre-quently as specified. In addition to check-ing the items listed, if you notice any un-usual noise, smell or vibration, you shouldinvestigate the cause or take your vehicleto your Toyota dealer or a qualified serviceshop immediately. It is recommendedthat any problem you notice be brought tothe attention of your dealer or the qualifiedservice shop for their advice.

Make these checks only whereadequate ventilation can be obtain–ed if you run the engine.

CAUTION!

OUTSIDE THE VEHICLE

Items listed below should be per-formed from time to time, unlessotherwise specified.

Tire pressureCheck the pressure with a gauge everytwo weeks, or at least once a month. SeeChapter 7–2 for additional information.

General maintenance

Page 167: Owners Manual

159

Tire surface and wheel nutsCheck the tires carefully for cuts, damageor excessive wear. See Chapter 7–2 foradditional information. When checkingthe tires, make sure no nuts are missing,and check the nuts for looseness. Tightenthem if necessary.Fluid leaksCheck underneath for leaking fuel, oil, wa-ter or other fluid after the vehicle has beenparked for a while. If you smell fuel fumesor notice any leak, have the cause foundand corrected immediately.Doors and engine hoodCheck that all doors including back dooroperate smoothly and all latches lock se-curely. Make sure the engine hood secon-dary latch secures the hood from openingwhen the primary latch is released.INSIDE THE VEHICLE

Items listed below should be checkedregularly, e.g. while performing peri-odic services, cleaning the vehicle,etc.LightsMake sure the headlights, stop lights, taillights, turn signal lights, and other lightsare all working. Check headlight aim.

Service reminder indicators and warn-ing buzzersCheck that all service reminder indicatorsand warning buzzers function properly.Steering wheelBe alert for changes in steering condition,such as hard steering or strange noise.SeatsCheck that all front seat controls such asseat adjusters, seatback recliner, etc. op-erate smoothly and that all latches locksecurely in any position. For folding–downrear seatbacks, check that the latcheslock securely. Make sure the front hea-drests are firmly secured.Seat beltsCheck that the seat belt system such asbuckles, retractors and anchors operateproperly and smoothly. Make sure the beltwebbing is not cut, frayed, worn or dam-aged.Accelerator pedalCheck the pedal for smooth operation anduneven pedal effort or catching.Clutch pedalCheck the pedal for smooth operation.Brake pedalCheck the pedal for smooth operation andthat the pedal has the proper clearance.Check the brake booster function.

BrakesAt a safe place, check that the brakes donot pull to one side when applied.Parking brakeCheck that the lever has the proper traveland that, on a safe incline, your vehicle isheld securely with only the parking brakeapplied.Automatic transmission “Park” mech-anismCheck the lock release button of the se-lector lever for proper and smooth opera-tion. On a safe incline, check that your ve-hicle is held securely with the selectorlever in ”P” position and all brakes re-leased.IN THE ENGINE COMPARTMENTItems listed below should be checkedfrom time to time , e.g. each time whenrefueling.Washer fluidMake sure there is sufficient fluid in thetank. See Chapter 7–3 for additional infor-mation.Engine coolant levelMake sure the coolant level is betweenthe ”FULL” and ”LOW” lines on the see–through reservoir when the engine is cold.See Chapter 7–2 for additional informa-tion.

Page 168: Owners Manual

160

Battery electrolyte levelMake sure the electrolyte level of all bat-tery cells is correct. Add only distilled wa-ter when replenishing. See Chapter 7–3for additional information.Brake fluid levelMake sure the brake fluid level is correct.See Chapter 7–2 for additional informa-tion.Engine oil levelCheck the level on the dipstick with the en-gine turned off and the vehicle parked ona level spot. See Chapter 7–2 for addition-al information.Power steering fluid levelCheck the level on the dipstick. The levelshould be in the “HOT” or “COLD” rangedepending on the fluid temperature. SeeChapter 7–2 for additional information.Exhaust systemIf you notice any change in the sound ofthe exhaust or smell exhaust fumes, havethe cause located and corrected immedi-ately. (See engine exhaust cautions inPart 2.)

Be on the alert for changes in perfor-mance, sounds, and visual tip–offs that in-dicate service is needed. Some importantclues are as follows:� Engine missing, stumbling, or pinging� Appreciable loss of power� Strange engine noises� A leak under the vehicle (however, wa-

ter dripping from the air conditioningafter use is normal.)

� Change in exhaust sound (This mayindicate a dangerous carbon monox-ide leak. Drive with the windows openand have the exhaust system checkedimmediately.)

� Flat–looking tire; excessive tire squealwhen cornering; uneven tire wear

� Vehicle pulls to one side when drivingstraight on a level road

� Strange noises related to suspensionmovement

� Loss of brake effectiveness; spongyfeeling brake or clutch pedal; pedal al-most touches floor; vehicle pulls to oneside when braking

� Engine coolant temperature continual-ly higher than normal

If you notice any of these clues, take yourvehicle to your Toyota dealer as soon aspossible. It probably needs adjustment orrepair.

Do not continue driving with the ve-hicle unchecked. It could result inserious vehicle damage and possi-bly personal injury.

CAUTION!

Does your vehicle needrepairing?

Page 169: Owners Manual

Part 7

161

DO–IT–YOURSELFMAINTENANCE—

Chapter 7–1Introduction� Engine compartment overview� Fuse locations� Do–it–yourself service

precautions� Parts and tools

Page 170: Owners Manual

162

Engine compartment overview (2JZ–GE engine)

Page 171: Owners Manual

163

Engine compartment overview (2JZ–GTE engine)

Page 172: Owners Manual

164

If you perform maintenance by your-self, be sure to follow the correct pro-cedure given in this part.You should be aware that improper or in-complete servicing may result in operat-ing problems.Performing do–it–yourself maintenanceduring the warranty period may affectyour warranty coverage. Read the sepa-rate Toyota Warranty statement for detailsand suggestions.This part gives instructions only for thoseitems that are relatively easy for an ownerto perform. As explained in Part 6, thereare still a number of items that must bedone by a qualified technician with specialtools.For information on tools and parts for do–it–yourself maintenance, see “Parts andtools”.Utmost care should be taken when work-ing on your vehicle to prevent accidentalinjury. Here are a few precautions thatyou should be especially careful to ob-serve:

Do–it–yourself serviceprecautionsFuse locations

Page 173: Owners Manual

165

� When the engine is running, keephands, clothing, and tools awayfrom the moving fan and enginedrive belts. (Removing rings,watches, and ties is advisable.)

� Right after driving, the enginecompartment—the engine, radia-tor, exhaust manifold, power steer-ing fluid reservoir and spark plugboots, etc.—will be hot. So becareful not to touch them. Oil,fluids and spark plugs may also behot.

� If the engine is hot, do not removethe radiator cap or loosen the drainplugs to prevent burning yourself.

� Do not smoke, cause sparks or al-low open flames around fuel or thebattery. Their fumes are flam-mable.

� Be extremely cautious when work-ing on the battery. It contains poi-sonous and corrosive sulfuricacid.

� Do not get under your vehicle withjust the body jack supporting it.Always use automotive jackstands or other solid supports.

CAUTION!� Be sure that the ignition is off if you

work near the electric cooling fansor radiator grille. With the ignitionon, the electric cooling fans will au-tomatically start to run if the enginecoolant temperature is high and/orthe air conditioning is on.

� Use eye protection whenever youwork on or under you vehicle whereyou may be exposed to flying or fal-ling material, fluid spray, etc.

� Used engine oil contains potential-ly harmful contaminants whichmay cause skin disorders such asinflammation or skin cancer, socare should be taken to avoid pro-longed and repeated contact withit. To remove used engine oil fromyour skin, wash thoroughly withsoap and water.

� Do not leave used oil within thereach of children.

� Dispose of used oil and filter onlyin a safe and acceptable manner.Do not dispose of used oil and fil-ter in household trash, in sewers oronto the ground. Call your dealeror a service station for informationconcerning recycling or disposal.

�Remember that battery and igni-tion cable carry high currents orvoltages. Be careful of accidental-ly causing a short circuit.

�Add only demineralized or dis-tilled w ater to fill the radiator. Andif you spill some of the coolant, besure to wash it off with water toprevent it from damaging theparts or paint.

�Do not overfill automatic trans-mission fluid, or the transmissioncould be damaged.

�Do not drive with the air cleaner fil-ter removed, or excessive enginewear could result. Also backfiringcould cause a fire in the enginecompartment.

NOTICE

Page 174: Owners Manual

166

�Be careful not to scratch the glasssurface with the wiper frame.

�When closing the engine hood,check to see that you have not for-gotten any tools, rags, etc.

Here is a list of parts and tools you willneed on performing do–it–yourself main-tenance. Remember all Toyota parts aredesigned in metric sizes, so your toolsmust be metric.Checking the engine oil levelParts (if level is low):� Engine oil API SH, “Energy–Conserv-

ing II” multigrade or ILSAC multigradehaving viscosity proper for your cli-mate

Tools:� Rag or paper towel� Funnel (only for adding oil)Checking the engine coolant levelParts (if level is low):� Ethylene–glycol antifreeze� Demineralized or distilled waterTools:� Funnel (only for adding coolant)Checking brake fluidParts (if level is low):� SAE J1703 or FMVSS No. 116 DOT 3

brake fluid

Tools:� Rag or paper towel� Funnel (only for adding fluid)Checking power steering fluid

Parts (if level is low):� Automatic transmission fluid DEX-

RON II or IIITools:� Rag or paper towel� Funnel (only for adding fluid)Checking battery conditionNon–maintenance batteries—Tools:� Warm water� Baking soda� Grease� Conventional wrench (for terminal

clamp bolts)Maintenance type batteries—Parts (if level is low):� Distilled waterTools:� Warm water� Baking soda

Parts and tools

Page 175: Owners Manual

167

� Grease� Conventional wrench (for terminal

clamp bolts)� Coin (for vent plugs)� Funnel (only for adding distilled water)Checking and replacing fusesParts (if replacement is necessary):� Fuse with same amperage rating as

originalAdding washer fluidParts:� Water� Washer fluid containing antifreeze (for

winter use)Tools:� FunnelReplacing light bulbsParts:� Bulb with same number and wattage

rating as original (See charts in “Re-placing light bulbs” in Chapter 7–3.)

Tools:� Screwdriver

Page 176: Owners Manual

168

Page 177: Owners Manual

Part 7 Checking the engine oil level

169

DO–IT–YOURSELFMAINTENANCE—

Chapter 7–2Engine and Chassis� Checking the engine oil level� Checking the engine coolant

level� Checking brake fluid� Checking power steering fluid� Checking tire pressure� Checking and replacing tires� Rotating tires� Installing snow tires and chains� Replacing wheels� Aluminum wheel precautions

With the engine at operating tempera-ture and turned off, check the oil levelon the dipstick.1. To get a true reading, the vehicle

should be on a level spot. After turningoff the engine, wait a few minutes forthe oil to drain back into the bottom ofthe engine.

2. Pull out the dipstick, and wipe it cleanwith a rag.

3. Reinsert the dipstick push it in as faras it will go, or the reading will not becorrect.

4. Pull the dipstick out and look at the oillevel on the end.

If the oil level is below or only slightlyabove the low level, add engine oil ofthe same type as already in the engine.Remove the oil filter cap and add engineoil in small quantities at a time, checkingthe dipstick.The approximate quantity of oil needed tofill between the low level and the full levelon the dipstick is indicated below for refer-ence.When the level reaches within the correctrange, install the filler cap hand–tight.Oil quantity, L (qt., Imp. qt.): 1.5 (1.6, 1.3)

�Avoid overfilling, or the enginecould be damaged.

�Check the oil level on the dipstickonce again after adding the oil.

NOTICE

Page 178: Owners Manual

170

ENGINE OIL SELECTION2JZ–GE engine—Use API SH, “Energy–Conserving II” multigrade engine oil orILSAC multigrade engine oil.Recommended viscosity (SAE):

SAE 5W–30 is the best choice for yourvehicle, for good fuel economy, andgood starting in cold weather.

If you use SAE 10W–30 engine oil inextremely low temperatures, the en-gine may become difficult to start, soSAE 5W–30 engine oil is recom-mended.

2JZ–GTE engine––Use API SH, “Ener-gy–Conserving II” multigrade engine oil orILSAC multigrade engine oil.Recommended viscosity (SAE):

If you use SAE 10W–30 engine oil inextremely low temperatures, the en-gine may become difficult to start, soSAE 5W–30 engine oil is recom-mended.

Oil identification marksEither or both API registered marks areadded to some oil containers to helpyou select the oil you should use.The API Service Symbol is located any-where on the outside of the container.The top portion of the label shows the oilquality by API (American Petroleum Insti-tute) designations such as SH. The cen-ter portion of the label shows the SAE vis-cosity grade such as SAE 5W–30.“Energy–Conserving II” shown in the low-er portion, indicates that the oil has fuel–saving capabilities. Oils marked “Energy–Conserving II” will have higherfuel–saving capabilities than oil marked“Energy–Conserving”.

Page 179: Owners Manual

171

The ILSAC (International Lubricant Stan-dardization and Approval Committee)Certification Mark is displayed on the frontof the container.

Look at the see–through coolant res-ervoir when the engine is cold. Thecoolant level is satisfactory if it is be-tween the “FULL” and “LOW” lines onthe reservoir. If the level is low, addethylene–glycol type coolant.The coolant level in the reservoir will varywith engine temperature. However, if thelevel is on or below the “LOW” line, addcoolant. Bring the level up to the “FULL”line.Use only ethylene–glycol type coolant.See information in the next column.If the coolant level drops within a shorttime after replenishing, there may be aleak in the system. Visually check the ra-diator, hoses, radiator cap and drain cockand water pump.If you can find no leak, have your Toyotadealer test the cap pressure and check forleaks in the cooling system.

To prevent burning yourself, do notremove the radiator cap when the en-gine is hot.

CAUTION!

Coolant type selectionYour coolant must contain ethylene–gly-col antifreeze. In addition to preventingfreezing and subsequent damage to theengine, this will also prevent corrosion.Further supplemental inhibitors or addi-tives are neither needed nor recom-mended.Read the antifreeze container for informa-tion on freeze protection. Follow themanufacturer’s directions for how muchto mix with water. The total capacity of thecooling system is given in Part 8. We rec-ommend 50% solution be used for yourToyota, or a sufficient quantity to provideprotection to about –35�C (–31�C).

Do not use alcohol type antifreezeor plain water alone.

NOTICE

Checking the engine coolantlevel

Page 180: Owners Manual

172

To check the fluid level, simply look atthe see through reservoir. The levelshould be between the “MAX” and“MIN” lines on the reservoir.It is normal for the brake fluid level to godown slightly as the brake pads wear. Sobe sure to keep the reservoir filled.If the reservoir needs frequent refilling, itmay indicate a serious mechanical prob-lem.If the level is low, add SAE J1703 orFMVSS No. 116 DOT 3 brake fluid to thebrake reservoir.

Remove and replace the reservoir coverby hand. Fill the brake fluid to the dotted-line. This brings the fluid to the correct lev-el when you put the cover back on.Use only newly opened brake fluid. Onceopened, brake fluid absorbs moistuirefrom the air, and excess moisture cancause a dangerous loss of braking.

CAUTION

Take care when filling the reservoirbecause brake fluid can harm youreyes and damage painted surfaces.If fluid gets in your eyes, flush youreyes with clean water.

!

If you spill the fluid, be sure to washit off with water to prevent it fromdamaging the parts or paint.

NOTICE

Check the fluid level on the dipstick. Ifnecessary, add automatic transmis-sion fluid DEXRON II or III.If the vehicle has been driven around 80km/h (50 mph) for 20 minutes (a little morein frigid temperatures), the fluid is hot(60�C 80�C or 140�F 175�F). Youmay also check the level when the fluid iscold (about room temperature, 10�C30�C or 50�F 85�F) if the engine hasnot been run for about five hours.a. Cleann all dirt from outside of the res-ervoir tank.b. Remove the filler cap by turning itcounterclockwise and wipe the dipstickclean.

Checking brake fluid Checking power steering fluid

Page 181: Owners Manual

173

c. Reinstall the filter cap.d. Remove the filter cap again and lookat the fluid level. If the fluid is cold, the lev-el should be in the “COLD“ range on thedipstick. Similarity, if it is hot, the fluid levelshould be in the ‘‘HOT‘‘ range. If the levelis at the low side of either range, add auto-matic transmission fluid DEXRON�II orIII to bring the level within the range.e. After replacing the filter cap, visuallycheck the steering box case., vane pumpand hose connections for leaks or dam-age.

CAUTION

The reservoir tank may be hot so becareful not to burn yourself.

!

Avoid overfilling, or the powersteering could be damaged.

NOTICE

Keep your tire pressures at the properlevel.The recommended cold tire pressures,tire size and the vehicle capacity weightare also given in Part 8. They are also onthe tire pressure as label shown.You should check the tire pressures everytwo weeks, or at least once a month. Anddon’t forget the spare!Incorrect tire pressure can reduce tirelife and make your vehicle less safe todrive.

Low tire pressure results in excessivewear, poor handling, reduced fuel econo-my, and the possibility of blowouts fromoverheated tires. Also, low tire pressurecan cause poor sealing of the tire bead.If the tire pressure is excessively low,there is the possibility of wheel deforma-tion and/or tire separation.High tire pressure produces a harsh ride,handling problems, excessive wear at thecenter of the tire tread, and a greater pos-sibility of tire damage from road hazards.If a tire frequently needs refilling, have itchecked by your Toyota dealer.The following instructions for check-ing tire pressure should be observed:� The pressure should be checked

only when the tires are cold. If yourvehicle has been parked for at least 3hours and has not been driven for morethan 1.5 km or 1 mile since , you will getan accurate cold tire pressure reading.

� Always use a tire pressure gauge.The appearance of a tire can be mis-leading. Besides, the presures that areeven just a few pounds off can degradehandling and ride.

Checking tire pressure

Page 182: Owners Manual

174

� Take special care when adding air tothe compact spare tire. The smallertire size can gain pressure very quickly.Add compressed air in small quantitiesand check the pressure often until itreaches the specified pressure.

� Do not bleed or reduce tire pressureafter driving. It is normal for the tirepressure to be higher after driving

� Never exceed the vehicle capacityweight. The passenger and luggageweight should be located so that the ve-hicle is balanced.

� Be sure to reinstall the tire inflationvalve caps. Without the valve caps, dirtor moisture could get into the valve coreand cause air leakage. If the caps havebeen lost, have new ones put on as soonas possible.

CHECKING YOUR TIRESCheck the tire tread for the tread wearindicators. If the indicators show, re-place the tires.The tires on your Toyota have built–intread wear indicators to help you knowwhen the tires need replacement. Whenthe tread depth wears to 1.6 mm (0.06 in.)or less, the indicators will appear. If youcan see the indicators in two or more adja-cent grooves, the tire should be replaced.The lower the tread, the higher the risk ofskidding.

Your Supra has been fitted with speciallydeveloped tires which provide exceptionaldynamic performance under general roadconditions. However, you may also noticethat your tyires wear more rapidly thanstandard tires as a result of their superiorperformance.The effectiveness of snow tires is lostif the tread wears down below 4 mm(0.16 in.).Check the tires regularly for damagesuch as cuts, splits and cracks. If anydamage is found, consult with a tech-nician and have the tire repaired or re-placed.Even if the damage does not appear seri-ous, a qualified technician should ex-amine the damage. Objects which havepenetrated the tire may have caused in-ternal damage.Any tires which are over six years oldmust be checked by a qualified techni-cian even if damage is not obvious.Tires deteriorate with age even if theyhave never or seldom been used.This also applies to the spare tire and tiresstored for future use.

Checking and replacing tires

Page 183: Owners Manual

175

REPLACING YOUR TIRES

When replacing a tire, use only thesame size and construction as origi-nally installed and with the same orgreater load capacity.Using any other size or type of tire may se-riously affect handling, ride, speedomeet-er/odometer calibration, ground clear-ance, and clearance between the bodyand tires or snow chains

CAUTION

� Do not mix radial, bias belted, orbias–ply tires on your vehicle. Itcan cause dangerous handlingcharacteristics, resulting in loss ofcontrol.

� Do not use tire or wheels other thanthe manufacturer’s recommendedsize.

!

Toyota recommends all four tires, or atleast both of the front or rear tires bereplaced at a time as a set.See “If you have a flat tire” in Part 4 for tirechange procedure.

When a tire is replaced, the wheelshould always be balanced.An unbalanced wheel may affect vehiclehandling and tire life. Wheels can get outof balance with regular use and shouldtherefore be balanced occasionally.When replacing a tubeless tire, the airvalve should also be replaced with anew one.

Do not perform rotation of the tires,from front to rear or from left to right,or using the compact spare tire. Per-forming such tire rotation may resultin the tires interfering with the body orin uneven wear of the tires, so thatsteerability of the vehicle is impaired.Tires with turning direction indicator—The tire is a uni–directional type and can-not be used for tire rotation. Using the tireon the opposite side to the designatedside will impair the tire performance.The compact spare tire—The tire is designed for temporary useonly and cannot be used for tire rotation.

Rotating tires

Page 184: Owners Manual

176

WHEN TO USE SNOW TIRES ORCHAINSSnow tires or chains are recom-mended when driving on snow or ice.On wet or dry roads, conventional tiresprovide better traction than snow tires.SNOW TIRE SELECTIONIf you need snow tires, select tires ofthe same size, construction and loadcapacity as the original tires on yourToyota.Do not install studded tires without firstchecking local regulations for possible re-strictions.SNOW TIRE INSTALLATIONSnow tires should be installed on allwheels.Installing snow tires on the front wheelsonly can lead to an excessive differencein road grip capability between the frontand rear tires which would cause loss ofvehicle control.When storing removed tires, you shouldstore them in a cool dry place.Mark the di-rection of rotation and be sure to installMark the direction of rotation and be sureto install them in the same direction whenreplacing.

� Do not drive with the snow tires in-correctly inflated.

� Never drive over 120 km/h (75 mph)with any type of snow tires.

CAUTION!

TIRE CHAIN SELECTION

Use the tire chains of correct size andtype.Use SAE Class “S” type radial tire chainsexcept radial cable chains or V–bar typechains.Regulations regarding the use of tirechains vary according to location ortype of r oad, so always check them be-fore installing chains.

Do not install tire chains on the255/40zr17 tires, as this coulddamage the vehicle body.

NOTICE

CHAIN INSTALLATION

Install the chains on the rear tires astightly as possible. Do not use tirechains on the rear tires. Retightenchains after driving 0.5 1.0 km(1/4 1/2 mile).When installing chains on your tires, care-fully follow the instructions of the chainmanufacturer.If wheel covers are used, they will bescratched by the chain band, so removethe covers before putting on the chains.

� Do not exceed 50 km/h (30 mph) orthe chain manufacturer’s recom-mended speed limit, whichever islower.

� Drive carefully avoiding bumps,holes, and sharp turns, which maycause the vehicle to bounce.

� Avoid sharp turns or locked–wheelbraking, as use of chains may ad-versely affect vehicle handling.

CAUTION!

Installing snow tires andchains

Page 185: Owners Manual

177

Do not attempt to use a tire chain onthe compact spare tire, as it mayresult in damage to the vehicle aswell as the tire.

NOTICE WHEN TO REPLACE YOUR WHEELS

If you have wheel damage such asbending, cracks or heavy corrosion,the wheel should be replaced.If you fail to replace damaged wheels, thetire may slip off the wheel or they maycause loss of handling control.

WHEEL SELEC TION

When replacing wheels, care shouldbe taken to ensure that the wheels arereplaced by ones with the same loadcapacity, diameter, rim width, and off-set.This must be observed on compact sparetires, too.Correcty replacement wheels are avail-able at your Toyota dealer..A wheel of a different size or type may ad-versely affect handling, wheel and bear-ing life, brake cooling, speedometer/odometer calibration, stopping ability,headlight aim, bumper height, vehicleground clearance, and tire or snow chainclearance to the body and chassis.

Replacement with used wheels is not rec-ommended as they may have been sub-jected to rough treatyment or high mile-age and could fail without warning. Also,bent wheels which have been straight-ened may have structural damage andtherefore should not be used. Never usean inner tube in aleaking wheel which isdesigned for a tubeless tire.

Replacing wheels

Page 186: Owners Manual

178

� After driving your vehicle the first 1600km (1000 miles), check that the wheelnuts are tight.

� If you have repaired or changed yourtires, check that the wheel nuts are stilltight after driving 1600 km (1000 miles).

� When using tire chians, be careful not todamage the aluminum wheels.

� Use only the Toyota wheel nuts andwrench designed for your aluminumwheels

� When balancing your wheels, use onlyToyota balance weights or equivalentand a plastic or rubber hammer.

� As with any wheel, periodically checkyour aluminum wheels for damage. Ifdamage, replace immediatly.

Aluminum wheel precautions

Page 187: Owners Manual

Part 7 Checking battery condition——Precautions

179

DO–IT–YOURSELFMAINTENANCE—

Chapter 7–3Electrical components� Checking battery condition� Battery recharging precautions� Checking and replacing fuses� Adding washer fluid� Checking the headlight aim� Replacing light bulbs

BATTERY PRECAUTIONSThe battery produces flammableand explosive hydrogen gas.� Do not cause a spark from the bat-

tery with tools.� Do not smoke or light a match near

the battery.The electrolyte contains poisonousand corrosive sulfuric acid.� Avoid contact with eyes, skin or

clothes.� Never ingest electrolyte.� Wear protective safety glasses

when working near the battery.� Keep children away from the bat-

tery.EMERGENCY MEASURES� If electrolyte gets in your eyes,

flush your eyes with clean waterfor at least 15 minutes and get im-mediate medical attention. If pos-sible, continue to apply water witha sponge or cloth while en route tothe medical office.

CAUTION!� If electrolyte gets on your skin,

thoroughly wash the contact area.If you feel pain or burning, getmedical attention immediately.

� If electrolyte gets on your clothes,there is a possibility of its soakingthrough to your skin, so immedi-ately take off the exposed clothingand follow the procedure above, ifnecessary.

� If you happen to swallow electro-lyte, drink a large quantity of wateror milk. Follow with milk of mag-nesia, beaten raw egg or vegetableoil. Then go immediately for emer-gency help.

Page 188: Owners Manual

180

Check the battery for corroded orloose terminal connections, cracks, orloose hold–down clamp.a. If the battery is corroded, wash it offwith a solution of warm water and bakingsoda. Coat the outside of the terminalswith grease to prevent further corrosion.b. If the terminal connections are loose,tighten their clamp nuts–but do not over-tighten.c. Tighten the hold–down clamp onlyenough to keep the battery firmly in place.Overtightening may damage the batterycase.

NOTICE

�Be sure the engine and all acces-sories are off before performingmaintenance.

�When checking the battery, re-move the ground cable from thenegative terminal (“–” mark) firstand reinstall it last.

�Be careful not to cause a short cir-cuit with tools.

�Take care no solution gets into thebattery when washing it.

There are two types of batteries: Main-tenance type and non–maintenancetype.A non–maintenance battery has “MAIN-TENANCE FREE BATTERY” on its top. Amaintenance type battery does not havesuch indication.Maintenance type battery—Check the fluid condition by the fluid levellines on the side of the battery. Or if thebattery has a hydrometer on its top, youcan also check the hydrometer.Non–maintenance battery—Check the battery condition by thehydrometer on the top of the battery.

—Checking battery exterior —Checking battery fluid

Page 189: Owners Manual

181

CHECKING BY THE FLUID LEVELLINES (MAINTENANCE TYPE BAT-TERY ONLY)

The fluid (electrolyte) level must be be-tween the upper and lower lines.When checking the fluid level, look at allsix cells, not just one or two.If the level is lower than the lower line, adddistilled water. (See “ADDING DIS-TILLED WATER”.)

CHECKING BY THE HYDROMETERCheck the battery condition by thehydrometer color.

Hydrometer colorCondition

Type A Type BCondition

GREEN BLUE Good

DARK WHITECharging necessary.Have battery checkedby your Toyota dealer.

CLEAR orLIGHTYELLOW

RED Add distilled water*

*: See “ADDING DISTILLED WATER”.

Non–maintenance battery

Hydrometer colorCondition

Type A Type BCondition

GREEN BLUE Good

DARK WHITECharging necessary.Have battery checkedby your Toyota dealer.

CLEAR orLIGHT

YELLOWRED Have battery checked

by your Toyota dealer.

NOTICE

Do not refill the battery with water.

Page 190: Owners Manual

182

ADDING DISTILLED WATER (MAINTE-NANCE TYPE BATTERY ONLY)1. Remove the vent plugs.2. Add distilled water to cells needing

fluid.If the side of your battery is covered,check the water level by looking down di-rectly above the cell as illustrated above.3. Retighten the vent plugs securely

NOTICE

Do not overfill the cells. Excesselectrolyte could squirt out of thebattery during heavy charging,causing corrosion or damage.

During recharging, the battery is pro-ducing hydrogen gas.Therefore, before recharging:1. Maintenance type batteries—Remove

the vent plugs.2. If recharging with the battery installed

on the vehicle, be sure to disconnectthe ground cable.

3. Be sure the power switch on the re-charger is off when connecting thecharger cables to the battery andwhen disconnecting them.

� Always charge the battery in anunconfined area. Do not chargethe battery in a garage or closedroom where there is not sufficientventilation.

� Non-maintenance batteries: Onlydo a slow charge (5A or less).Charging at a quicker rate is dan-gerous. The battery may explode,causing personal injuries.Maintenance type batteries: Besure to remove the vent plugs be-fore recharging.

CAUTION!

Battery recharging precautions

Page 191: Owners Manual

183

NOTICE

Never recharge the battery while theengine is running. Also, be sure allaccessories are turned off.

If the headlights or other electricalcomponents do not work, check thefuses. If any of the fuses are blown,they must be replaced.See “Fuse locations” in Chapter 7–1 forlocations of the fuses.Turn the ignition switch and inopera-tive component off. Pull a suspectedfuse straight out and check it.Determine which fuse may be causing theproblem. The lid of the fuse box shows thename of the circuit for each fuse. See Part8 of this manual for the functions con-trolled by each circuit.Type A fuses can be pulled out by usingthe pull–out tool.

Checking and replacing fuses

Page 192: Owners Manual

184

If you are not sure whether the fuse hasblown, try replacing the suspected fusewith one that you know is good.If the fuse has blown, push a new fuseinto the clip.Only install a fuse with the amperage rat-ing designated on the fuse box lid.If you do not have a spare fuse, in anemergency you can pull out the “CIG”,“RAD NO. 2”, “DOME” or “HTR” fuse,which may be dispensable for normal driv-ing, and use it if its amperage rating is thesame.If you cannot use one of the same amper-age, use one that is lower, but as close aspossible to the rating. If the amperage islower than that specified, the fuse mightblow out again but this does not indicateanything wrong. Be sure to get the correctfuse as soon as possible and return thesubstitute to its original clip.It is a good idea to purchase a set of sparefuses and keep them in your vehicle foremergencies.If the new fuse immediately blows out,there is a problem with the electrical sys-tem. Have your Toyota dealer correct it assoon as possible.

Never use a fuse with a higher am-perage rating, or any other object, inplace of a fuse. This may cause ex-tensive damage and possibly a fire.

CAUTION!If any washer does not work, the wash-er tank may be empty. Add washerfluid.You may use plain water as washer fluid.However, in cold areas where tempera-tures range below freezing point, usewasher fluid containing antifreeze. Thisproduct is available at your Toyota dealerand most auto parts stores. Follow themanufacturer’s directions for how muchto mix with water.

NOTICE

Do not use engine antifreeze or anyother substitute because it maydamage your vehicle’s paint.

Adding washer fluid

Page 193: Owners Manual

185

Before checking the headlight aim:1. Be sure that the body around the

headlight is not deformed.2. Park the vehicle on a level spot.3. The driver gets into the driver’s seat

and puts the vehicle in a state readyingfor a driving (with a full tank).

4. Bounce the vehicle several times

To check the headlight aim, check thevertical and horizontal gauges.1. Look at the beam angle gauge (vertical

movement). The bubble of the gaugeshould not deviate from the center ofthe gauge by more than two marks oneither side of the gauge.

2. Look at the beam angle gauge (hori-zontal movement). The “0” markshould not deviate by more than onemark on either side of the gauge.

If the error is over the value specifiedabove, take the vehicle to your Toyotadealer to adjust the headlight aim.

Checking the headlight aim

Page 194: Owners Manual

186

The following illustrations show how togain access to the bulbs. When replacinga bulb, make sure the ignition switch andlight switch are off. Use bulbs with thewattage ratings given in the table.

Halogen bulbs have pressurizedgas inside and require special han-dling. They can burst or shatter ifscratched or dropped. Hold a bulbonly by its plastic or metal case. Donot touch the glass part of a bulbwith bare hands.

CAUTION!

NOTICE

Only use a bulb of the listed type.

Light bulbs BulbNo.

W Type

Headlight(low beam)

9006 55 A

Headlight(high beam)

9005 65 B

Front fog lights — 55 C

Parking lights — 5 E

Front turn signal lights 7440 21 E

Front side marker lights 194 3.8 E

Rear side marker lights 194 3.8 E

Rear turn signal lights 7440 21 E

Stop and tail lights 7443 21/5 E

Back–up lights 7440 21 E

License plate light — 5 E

Interior lights — 8 D

Glovebox light — 1.2 E

Luggage compartmentlight

— 5 F

A: HB4 halogen bulbsB: HB3 halogen bulbsC: H3 halogen bulbsD: Single end bulbsE: Wedge base bulbsF: Double end bulbs

1. Open the hood.

RIGHT SIDE HEADLIGHT: Rel ease theclips of the air cleaner and remove theair cleaner cover.

—Headlights (low beam)Replacing light bulbs—

Page 195: Owners Manual

187

2. Unplug the connector while de-pressing the lock release.

If the connector is tight, wiggle it.

3. Turn the bulb clockwise and re-move it. Install a new bulb, turn itcounterclockwise, then plug in theconnector.

To install a bulb, align the tab of the bulbsocket with the cutouts of the mountinghole.RIGHT SIDE HEADLIGHT: Install the aircleaner cover securely.Aiming is not necessary after replacingthe bulb. When aiming adjustment is nec-essary, contact your Toyota dealer.

1. Open the hood.

RIGHT SIDE HEADLIGHT: Rel ease theclips of the air cleaner and remove theair cleaner cover.

—Headlights (high beam)

Page 196: Owners Manual

188

2. Unplug the connector while de-pressing the lock release.

If the connector is tight, wiggle it.

3. Turn the bulb counterclockwiseand remove it. Install a new bulb,turn it clockwise, then plug in theconnector.

To install a bulb, align the tab of the bulbsocket with the cutouts of the mountinghole.RIGHT SIDE HEADLIGHT: Install the aircleaner cover securely.Aiming is not necessary after replacingthe bulb. When aiming adjustment is nec-essary, contact your Toyota dealer.

1. Open the hood.

RIGHT SIDE HEADLIGHT: Rel ease theclips of the air cleaner and remove theair cleaner cover.

—Front fog lights

Page 197: Owners Manual

189

2. Turn the cover counterclockwiseand remove it.

3. Disconnect the cords. 4. Release the bulb retaining springand remove the bulb. Install a newbulb and the bulb retaining spring.

To install the bulb, align the cutouts of thebulb with the protrusions of the mountinghole.

Page 198: Owners Manual

190

5. Connect the cords and install thecover by turning it clockwise.

RIGHT SIDE HEADLIGHT: Install the aircleaner cover securely.

—Parking lights —Front turn signal lights

Page 199: Owners Manual

191

Use a Phillips–head screw driver Use a Phillips–head screwdriver.

—Front side marker lights —Rear side marker lights

Page 200: Owners Manual

192

Use a Phillips–head screwdriver.

—Rear turn signal, stop andtail, and back–up lights

Page 201: Owners Manual

193

a: Rear turn signal lightb: Stop and tail lightc: Back–up light

Use a Phillips–head screwdriver.

—License plate lights

Page 202: Owners Manual

194

Page 203: Owners Manual

Part 8 Dimensions and weight Engine

195

SPECIFICATIONS� Dimensions and weight� Engine� Fuel� Service specifications� Tires� Fuses

Overall length mm (in.) 4515 (177.7)Overall width mm (in.) 1810 ( 71.3)Overall height mm (in.) 1275 ( 50.2)*Wheelbase mm (in.) 2550 (100.4)Front tread mm (in.) 1520 ( 59.9)Rear tread mm (in.) 1525 ( 60.1)Vehicle capacity weight(occupants + luggage)

kg (lb.) 330 (725)

*: Unladen vehicle

Model:2JZ–GE and 2JZ–GTE

Type:2JZ–GE engine

6 cylinder in line, 4 cycle, gasoline2JZ–GTE engine

6 cylinder in line, 4 cycle, gasoline(with turbocharger)

Bore and stroke, mm (in.):86.0 x 86.0 (3.39 x 3.39)

Displacement, cm3 (cu. in.):2997 (182.9)

Page 204: Owners Manual

196

Fuel type:Premium unleaded gasoline, ResearchOctane Number 96 (Octane Rating 91)or higher

Fuel tank capacity, L (gal., Imp. gal.):70 (18.5, 15.4)

ENGINEValve clearance (engine cold), mm (in.):

Intake 0.15 0.25 (0.006 0.010)Exhaust 0.25 0.35 (0.010 0.014)

Spark plug type:2JZ–GE engine

NIPPONDENSO PK16R11NGK BKR5EP11

2JZ–GTE engineNIPPONDENSO PK20R11NGK BKR6EP11

Spark plug gap, mm (in.):1.1 (0.043)

ENGINE LUBRICATIONOil capacity (drain and refill), L (qt., Imp. qt.):

2JZ–GE engineWith filter 5.2 (5.5, 4.6)Without filter 4.9 (5.2, 4.3)

2JZ–GTE engineWith filter 5.0 (5.3, 4.4)Without filter 4.7 (5.0, 4.1)

Oil grade:API SH, “Energy–Conserving II” multi-grade engine oil or ILSAC multigrade en-gine oil

Recommended oil viscosity (SAE):2JZ–GE engine

Temperature range anticipated before next oilchange.

L70010

2JZ–GTE engine

Temperature range anticipated before next oilchange.

L70009

Fuel Service specifications

Page 205: Owners Manual

197

COOLING SYSTEMTotal capacity, L (qt., Imp. qt.):

2JZ–GE engineWith manual transmission

7.3 (7.7, 6.4)With automatic transmission

8.3 (8.8, 7.3)2JZ–GTE engine

With manual transmission8.9 (9.4, 7.8)

With automatic transmission8.8 (9.3, 7.7)

Coolant type:With ethylene–glycol antifreeze(Do not use alcohol type.)

BATTERYOpen voltage* at 20 �C (68 �F):

12.7 V Fully charged12.3 V Half charged11.9 V Discharged

*: Voltage that is checked 20 minutes af-ter the key is removed with all the lightsturned off

Charging rates:5 A max.

CLUTCHPedal freeplay, mm (in.):

5 15 (0.2 0.6)Fluid type:

SAE J1703 or FMVSS No. 116 DOT 3

MANUAL TRANSMISSIONOil capacity, L (qt., Imp. qt.): 5–speed 2.6 (2.7, 2.3) 6–speed 1.8 (1.9, 1.6)Oil type:

5–speedMultipurpose gear oil API GL–4 or GL–5

6–speedESSO ATF DEXRON D–21065,TOYOTA GEAR OIL V160 or equivalent

Recommended oil viscosity:SAE 75W–90

AUTOMATIC TRANSMISSIONFluid capacity (drain and refill),L (qt., Imp. qt.): 2JZ–GE engine Up to 1.6 (1.7, 1.4) 2JZ–GTE engine Up to 1.9 (2.0, 1.7)

Fluid type:2JZ–GE engine

Automatic transmission fluid D–IIor DEXRON III (DEXRON II)

2JZ–GTE engineAutomatic transmission fluid TYPE T–II or equivalent

DIFFERENTIALOil capacity, L (qt., Imp. qt.): 1.35 (1.43 1.19)Oil type:

Hypoid gear oil API GL–5Recommended oil viscosity:

Above –18°C (0°F)SAE 90

Below –18°C (0°F)SAE 80W or 80W–90

BRAKESMinimum pedal clearance when depre–ssed with the pressure of 490 N (50 kgf,110 lbf) with the engine running, mm (in.):

2JZ–GE engine 72 (2.8)2JZ–GTE engine 70 (2.8)

Page 206: Owners Manual

198

Pedal freeplay, mm (in.):1—6 (0.04–0.24)

Pad wear limit, mm (in.):1.0 (0.04)

Lining wear limit, mm (in.):1.0 (0.04)

Parking brake adjustment when pulledwith the force of 196 N (20 kgf, 44 lbf):

5 8 clicksFluid type:

SAE J1703 or FMVSS No. 116DOT 3

STEERINGWheel freeplay:

Less than 30 mm (1.2 in.)Power steering fluid type:

Automatic transmission fluid DEXRON II or III

Tire size:Spare tire

T145/70 R 17Except spare tire2JZ–GE engine

225/50R 16 92V (for front use only)245/45R 16 94V (for rear use only)

2JZ–GTE engine235/45ZR 17 (for front use only)255/40ZR 17 (for rear use only)

Tire pressure, kPa (kgf/cm 2 or bar,psi):

Spare tire 420 (4.2, 60)Except spare tire 230 (2.3, 33)

Wheel size:225/50R 16 92V 16 x 8JJ245/45R 16 94V 16 x 9JJ235/45ZR 17 17 x 8JJ255/40ZR 17 17 x 9.5JJT145/70R 17 17 x 4T

Wheel nut torque, N ⋅m (kgf ⋅m, ft ⋅lbf):103 (10.5, 76)

Fuses (type A)1. WIPER 20 A: Windshield wipers and

washer, rear window wiper and wash-er

2. HTR 7.5 A: Air conditioning system3. SEAT–HTR 15 A: Seat heater4. ST 7.5 A: Starter system5. IGN 7.5 A: Charging system, dis-

charge warning light, multiport fuel in-jection system/sequential multiportfuel injection system, SRS airbag sys-tem

6. PANEL 10 A: Instrument panel lights,instrument panel lights control

7. MIR–HTR 10 A: Mirror heaters8. TURN 7.5 A: Turn signal lights

Tires Fuses

Page 207: Owners Manual

199

9. STOP 15 A: Stop lights, cruise controlsystem cancel device

10.CIG 15 A: cigarette lighter, air condi-tioning system, SRS airbag system,theft deterrent system, shift lock con-trol system

11.RAD NO.2 7.5 A: Radio, cassettetape player, power antenna

12.TAIL 10 A: Tail lights, parking lights,front side marker lights, rear sidemarker lights, licence plate lights

13.ECU–IG 10A: Cruise control system,anti–lock brake system, power steer-ing, power antenna, theft deterrentsystem, shift lock control system, trac-tion control system

14.GAUGE 10A: Gauges and meters,service reminder indicators and warn-ing buzzers (except discharge andopen door warning lights), rear windowdefogger, charging system, cruisecontrol system, electronically con-trolled automatic transmission sys-tem, traction control system

15.ECU–B 10 A: Air conditioning system,cruise control system, anti–lock brakesystem, SRS airbag system, tractioncontrol system

16.EFI NO.2 30 A): Multiport fuel injec-tion system/sequential multiport fuelinjection system

17.EFI NO.1 30A: Multiport fuel injectionsystem/sequential multiport fuel injec-tion system

18.AM2 30 A: Starter system19.FOG 15 A: Front fog lights20.HAZ–HORN 15 A: Emergency flash-

ers, horns21.TRAC 7.5 A: Traction control system22.ALT–S 7.5 A: Charging system23.DOME 7.5 A: Interior lights, personal

lights, door courtesy lights, luggagecompartment light, ignition switchlight, open door warning light, theft de-terrent system, daytime running lightsystem

Page 208: Owners Manual

200

24.RAD NO.1 20 A: Radio cassette tapeplayer

25.HEAD (RH) 15 A: Right–hand head-light

26.HEAD (LH) 15 A: Left–hand headlight27.HEAD (RH–LWR) 15 A: Right–hand

headlight (low beam)28.HEAD (LH–LWR) 15 A: Left–hand

headlight (low beam)29.HEAD (RH–UPR) 15 A: Right–hand

headlight (high beam)30.HEAD (LH–UPR) 15 A: Left–hand

headlight (high beam)31.DRL 7.5 A: Daytime running light sys-

tem32.30 A: Spare fuse33.7.5 A: Spare fuse34.15 A: Spare fuse35.OBD–II 7.5 A: On–board diagnosis

systemFuses (type B)

36.DOOR 30 A: Power window, powerdoor lock system, theft deterrent sys-tem

37.DEFOG 30 A: Rear window defogger

Fuses (type C)38.ALT 120 A: Charging system39.MAIN 50 A: Starter system, head-

lights40.HTR 50 A: Air conditioning system41.FAN 30 A: Electric cooling fan42.ABS NO.1 60 A: Anti–lock brake sys-

tem, traction control system43.AM1 50 A: Electronic ignition system/

distributor ignition system44.AM1 60 A: Electronic ignition system/

distributor ignition system45.POWER 60 A: “PANEL”, “STOP”,

“TAIL”, “ECU–B”, “DEFOG” and“DOOR” fuses

Page 209: Owners Manual

Part 9Reporting safety defects forU.S. owners

201

REPORTING SAFETYDEFECTS FOR U.S.OWNERS ANDUNIFORM TIREQUALITY GRADING� Reporting safety defects for

U.S. owners� Uniform tire quality grading

If you believe that your vehicle hasa defect which could cause a crashor could cause injury or death, youshould immediately inform the Na-tional Highway Traffic Safety Ad-ministration (NHTSA) in addition tonotifying Toyota Motor Sales,U.S.A., Inc.(Toll–free: 1–800–331–4331).If NHTSA receives similar com-plaints, it may open a investiga-tion, and if it finds that a safety de-fect exists in a group of vehicles, itmay order a recall and remedycampaign. However, NHTSAcannot become involved in individ-ual problems between you, yourdealer, or Toyota Motor Sales,U.S.A., Inc.

To contact NHTSA, you may eithercall the Auto Safety Hotline tollfreeat 1–800–424–9393 (or 366–0123in Washington D.C. area) or writeto: NHTSA. U.S. Department ofTransportation. Washington D.C.20590. You can also obtain otherinformation about motor vehiclesafety from the Hotline.

Page 210: Owners Manual

202

This information has been prepared in ac-cordance with regulations issued by theNational Highway Traffic Safety Adminis-tration of the U.S. Department of Trans-portation. It provides the purchasers and/or prospective purchasers of Toyotavehicles with information on uniform tirequality grading.Your Toyota dealer will help answer anyquestions you may have as you read thisinformation.DOT quality grades—All passengervehicle tires must conform to FederalSafety Requirements in addition tothese grades. These quality grades aremolded on the sidewall.Treadwear —The treadwear grade is acomparative rating based on the wearrate of the tire when tested under con-trolled conditions on a specified govern-ment test course. For example, a tiregraded 150 would wear one and a half(1–1/2) times as well on the governmentcourse as a tire graded 100. The relativeperformance of tires depends upon theactual conditions of their use, however,and may depart significantly from thenorm due to variations in driving habits,service practices and differences in roadcharacteristics and climate.

Traction A, B, C —The traction grades,from highest to lowest, are A, B, and C,and they represent the tire’s ability to stopon wet pavement as measured undercontrolled conditions on specified govern-ment test surfaces of asphalt and con-crete. A tire marked C may have poor trac-tion performance.Warning: The traction grade assigned tothis tire is based on braking (straightahead) traction tests and does not includecornering (turning) traction.Temperature A, B, C —The temperaturegrades are A (the highest), B, and C, rep-resenting the tire’s resistance to the gen-eration of heat and its ability to dissipateheat when tested under controlled condi-tions on a specific indoor laboratory testwheel. Sustained high temperature cancause the material of the tire to degener-ate and reduce tire life, and excessive fail-ure. The grade C corresponds to a level ofperformance which all passenger car tiresmust meet under the Federal Motor Ve-hicle Safety Standard No. 109. Grades Band A represent higher levels of perfor-mance on the laboratory test wheel thanthe minimum required by law.

Warning: The temperature grades for thistire are established for a tire that is proper-ly inflated and not overloaded. Excessivespeed, underinflation, or excessive load-ing, either separately or in combination,can cause heat buildup and possible tirefailure.

Uniform tire quality grading

Page 211: Owners Manual

29

SCHEDULED MAINTENANCE

IntroductionThe scheduled maintenance informationincluded in this supplement is provided asa guide to assist you in getting the greatestownership value from your Toyota, whilehelping to maximize its performance,safety,and reliability. In addition to scheduledmaintenance, your Toyota also requires on-going general maintenance which includeschecking fluid levels and simple visualinspections for potential signs of trouble.These items are explained separately in the“General Maintenance” section of yourOwner’s Manual.

How much scheduled maintenanceyour Toyota requires depends on how youdrive, as well as the environmental condi-tions in which you drive.The demands onvehicles can vary significantly depending onthe driver,driving conditions, and geograph-ic location. The following pages will assistyou in determining the proper amount ofmaintenance for your Toyota so that youwon’t have to pay for more maintenancethan your Toyota needs. Note: Failure toproperly maintain your vehicle can result inyour warranty being voided either in wholeor in part; please refer to the “New VehicleLimited Warranty–Owner’s Responsibilities”section of this supplement for details.

The Scheduled Maintenance Log begin-ning on page 34 of this supplement allowsyou to easily identify the maintenancerequirements at each mileage (or month)interval, while also providing a convenientplace to document your vehicle’s main-tenance history. Properly maintainingyour Toyota and documenting its mainte-nance history can also help increase itsresale value.

How to Use the ScheduledMaintenance LogOil Change IntervalsThe Scheduled Maintenance Log has beendesigned to provide you with the flexibilityto follow either 5,000-mile or 7,500-mileoil change intervals, depending on yourcircumstances.■ Use 5,000-mile oil change intervals to

help ensure proper engine lubricationunder most driving conditions or for thefollowing:– You primarily operate your Toyota

under the “Special Operating Con-ditions” described on page 30 of thissupplement.

– Your Toyota is turbocharged.*

■ Use 7,500-mile oil change intervals if you primarily operate your non-turbo-charged Toyota under light, non-commer-cial duty for distances greater thanfive miles in temperate climates (abovefreezing and below 90° F).

If you choose 5,000-mile oil change intervals,simply follow the instructions printed in thenon-shaded boxes as shown in this example:

If you choose 7,500-mile oil change inter-vals,simply follow the instructions printed inthe shaded boxes as shown in this example:

The 5,000- and 7,500-mile intervals coin-cide at 15,000-mile increments; therefore,both the shaded and non-shaded boxes areshown as in this example:

15,000 MILES

7,500 MILES

5,000 MILES

15,000 MILES

* Note: If a turbocharged Toyota is driven underthe “Special Operating Conditions” described onpage 30, then the oil change intervals should befurther reduced to 2,500 miles.

Page 212: Owners Manual

30

SCHEDULED MAINTENANCE

Additional Maintenance Items for“Special Operating Conditions”To assist you in getting the greatest owner-ship value from your Toyota, the ScheduledMaintenance Log separates the basic main-tenance item requirements for mostvehicles from the additional maintenanceitem requirements for vehicles that operateunder more demanding “Special OperatingConditions.”

For the majority of owners who operatetheir Toyotas for personal use under nor-mal conditions, the basic maintenanceitems listed in the upper section of themaintenance box should provide all themaintenance your Toyota needs. If youoperate your Toyota primarily in any ofthe more demanding “Special OperatingConditions” listed in the next column, youshould have the additional maintenanceitems indicated in the maintenance boxperformed on your Toyota. If you onlyoccasionally operate your vehicle underthese conditions, it is not necessary to per-form the additional maintenance items.

Note: If you meet the requirements for 7,500-mile oil change intervals as indicated in theprevious section, your Toyota should notrequire the additional maintenance items.

Special Operating Conditions:

1. Towing a trailer or using a camper or car-top carrier.

2. Repeated short trips of less than fivemiles in temperatures below freezing.

3. Extensive idling or low-speed driving forlong distances as in heavy commercialuse, such as delivery, taxi, or patrol car.

4. Operating on rough, muddy, or salt-covered roads.

5. Operating on unpaved or dusty roads.

Note: Turbocharged vehicles that aredriven under the “Special OperatingConditions” listed above should changetheir engine oil at 2,500-mile intervals.It is not necessary, however, to changethe oil filter at 2,500-mile intervals. Boththe engine oil and filter should bereplaced at the 5,000-mile intervals.

Example:■ Change engine oil only at 2,500,

7,500, 12,500…miles.■ Change engine oil and filter at

5,000, 10,000, 15,000…miles.

Page 213: Owners Manual

31

SCHEDULED MAINTENANCE

Explanation of ScheduledMaintenance Items

The following explanations are provided togive you a greater awareness and under-standing of the individual maintenanceitems that should be performed on yourToyota to help ensure long life andtop operating condition. The ScheduledMaintenance Log in the next section of thissupplement identifies which of these main-tenance items should be performed at eachmileage/month interval.

Engine Components and EmissionControl SystemsTiming BeltIf the vehicle is operated under extensiveidling or low-speed driving for long dis-tances as in heavy commercial use such as delivery, taxi, or patrol car, replace thetiming belt every 60,000 miles.A qualifiedtechnician should perform this operation.

Valve ClearanceInspect for excessive tappet noise and/orengine vibration and adjust if necessary.A qualified technician should performthis operation.

Drive BeltsInspect the drive belts for cracks,excessivewear, or oiliness. Replace the belts if damaged, and check the belt tension andadjust it if necessary. After inspection at60,000 miles or 48 months, inspect every15,000 miles or 12 months.

Engine Oil and Oil FilterChange the engine oil and oil filter whenscheduled. Use API SH, Energy-ConservingII multigrade engine oil or ILSAC multigradeengine oil. For recommended viscosity,please refer to your Owner’s Manual.

Engine CoolantDrain and flush the cooling system whenscheduled. Refill only with an ethylene-glycol type coolant. A qualified technicianshould perform this operation.

Exhaust Pipes and MountingsVisually inspect the exhaust pipes, muffler,and hangers for cracks, deterioration, ordamage. Start the engine and listen carefullyfor any exhaust gas leakage. Tighten connec-tions or replace parts as necessary.

Engine Air FilterReplace the engine air cleaner filter when scheduled.

Page 214: Owners Manual

32

SCHEDULED MAINTENANCE

Fuel Lines and Connections, FuelTank Vapor Vent System Hoses, andFuel Tank BandVisually inspect the lines, connections,hoses, and tank band for corrosion,damage,cracks, and loose or leaking connections.Tighten connections or replace parts asnecessary.

Fuel Tank Cap GasketVisually inspect the fuel tank cap gasket forcracks,deterioration,or damage,and replaceif necessary.

Spark PlugsInstall new plugs of the same type as origi-nally equipped. A qualified technicianshould perform this operation.

Charcoal CanisterInspect for internal damage or clogging asscheduled. Clean with compressed air orreplace if necessary. A qualified technicianshould perform this operation.

Chassis and BodyTire RotationTo equalize tire wear and help extend tirelife, Toyota recommends that you rotateyour tires every 5,000 to 7,500 miles.How-ever, the most appropriate timing for tirerotation may vary according to your driv-ing habits and road surface conditions.

Brake Linings (Shoes and Pads), Drums and DiscsCheck the brake linings (shoes) and drumsfor scoring, burning, leaking fluid, brokenparts, and excessive wear. Check the padsfor excessive wear and discs for runout andwear, and leaking fluid. A qualified techni-cian should perform this operation.

Brake Lines and HosesVisually check for proper installation. Checkfor chafing,cracks,deterioration,and any evi-dence of leaking.Replace any deteriorated ordamaged parts immediately. A qualified tech-nician should perform these operations.

Steering LinkageWith the vehicle stopped, check for exces-sive freeplay in the steering wheel. Checkthe linkage for bending or damage. Checkthe dust boots for deterioration, cracks, ordamage. Replace any damaged parts.

SRS Air BagsAfter initial inspection at 120 months fromthe manufacture date on the certificationlabel, inspect every 24 months.A qualifiedtechnician should perform this operation.

Rack and Pinion AssemblyInspect the rack and pinion assemblies forsigns of leakage.If you discover any leakage,have it repaired immediately by a qualifiedtechnician.

Ball Joints and Dust CoversCheck the suspension and steering linkageball joints for looseness or damage. Checkall dust covers for deterioration or damage.A qualified technician should perform thisoperation.

Page 215: Owners Manual

33

SCHEDULED MAINTENANCE

Drive Shaft Boots Check the drive shaft boots and clamps forcracks, deterioration, or damage. Replaceany damaged parts and, if necessary, repackthe grease. For Camry, Avalon, and Supra,also re-torque the flange bolts (drive shaftto differential or side gear shaft). A quali-fied technician should perform theseoperations.

Manual Transmission OilInspect each component for signs of leak-age when scheduled. If you discover anyleakage, have it repaired by a qualified tech-nician immediately.If the vehicle is operatedunder the “Special Operating Conditions”defined on page 30 of this supplement,change the oil when scheduled.

Automatic Transmission and Differential OilInspect each component for signs of leak-age when scheduled. If you discover anyleakage, have it repaired by a qualified tech-nician immediately.If the vehicle is operatedunder the “Special Operating Conditions”defined on page 30 of this supplement,change the oil when scheduled.

Limited-Slip Differential OilInspect every 15,000 miles or 12 months.Replace every 30,000 miles or 24 months.A qualified technician should perform thisoperation.

Wheel Bearing GreaseRepack the wheel bearings with wheelbearing grease.

Bolts and Nuts on Chassis and BodyIf the vehicle is operated under the “SpecialOperating Conditions” defined on page 30of this supplement, re-tighten the seatmounting bolts and front and rear suspen-sion member retaining bolts to specifiedtorque.

Page 216: Owners Manual

34

MAINTENANCE LOG

5,000 Miles or 4 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

10,000 Miles or 8 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification Dealer Service Verification

7,500 Miles or 6 Months*

Dealer Service VerificationDate:__________________________________

Mileage:___________________

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

� Replace engine oil and oil filter

� Rotate tires

Page 217: Owners Manual

35

MAINTENANCE LOG

15,000 Miles or 12 Months*15,000 Miles or 12 Months*

� Replace engine oil and oil filter� Rotate tires� Inspect the following:

__ Exhaust pipes and mountings __ Ball joints and dust covers__ Brake: linings, discs/drums, lines, hoses __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Automatic transmission and differential oil__ Rack and pinion assy. for leakage __ Limited-slip differential oil (Supra)

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires theadditional maintenance items.

� Inspect air filter� Replace automatic transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Page 218: Owners Manual

36

MAINTENANCE LOG

20,000 Miles or 16 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

25,000 Miles or 20 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification Dealer Service Verification

22,500 Miles or 18 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 219: Owners Manual

37

MAINTENANCE LOG

30,000 Miles or 24 Months*30,000 Miles or 24 Months*

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Replace transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

� Inspect the following:__ Fuel lines and connections, fuel

tank vapor vent system hoses,fuel tank band

__ Fuel tank cap gasket__ Exhaust pipes and mountings__ Brake: linings, discs/drums,

lines, hoses

__ Steering linkages__ Rack and pinion assy. for leakage__ Ball joints and dust covers__ Drive shaft boots (re-torque flange

bolts)__ Transmission and differential oil

� Replace engine oil and oil filter� Rotate tires� Replace engine air filter� Replace non-platinum spark plugs1

– Celica (7AFE), Corolla, Paseo,Tercel

� Replace engine coolant� Repack rear wheel bearings

(Tercel, Paseo)� Replace limited-slip differential oil

(Supra)

1 Maintenance service is required under the terms of the Emission Control Warranty.

Dealer Service Verification

Page 220: Owners Manual

38

MAINTENANCE LOG

37,500 Miles or 30 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

35,000 Miles or 28 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

40,000 Miles or 32 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 221: Owners Manual

39

MAINTENANCE LOG

45,000 Miles or 36 Months*45,000 Miles or 36 Months*

� Replace engine oil and oil filter� Rotate tires� Inspect the following:

__ Exhaust pipes and mountings __ Ball joints and dust covers__ Brake: linings, discs/drums, lines, hoses __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Automatic transmission and differential oil__ Rack and pinion assy. for leakage __ Limited-slip differential oil (Supra)

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Inspect air filter� Replace automatic transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Page 222: Owners Manual

40

MAINTENANCE LOG

52,500 Miles or 42 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

50,000 Miles or 40 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

55,000 Miles or 44 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 223: Owners Manual

41

MAINTENANCE LOG

60,000 Miles or 48 Months*60,000 Miles or 48 Months*

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Replace timing belt3

� Replace transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage: __________________

� Inspect the following:__ Valves (audible inspection),

adjust if necessary__ Drive belts__ Fuel lines and connections, fuel

tank vapor vent system hoses,fuel tank band

__ Fuel tank cap gasket__ Charcoal canister (72 months)2

__ Exhaust pipes and mountings__ Brake: linings, discs/drums, lines, hoses__ Steering linkages__ Rack and pinion assy. for leakage__ Ball joints and dust covers__ Drive shaft boots (re-torque flange bolts)__ Transmission and differential oil

� Replace engine oil and oil filter� Rotate tires� Replace engine air filter� Replace spark plugs1

� Replace engine coolant� Repack rear wheel bearings

(Tercel, Paseo)� Replace limited-slip differential oil

(Supra)

1 Maintenance service is required under the terms of the Emission Control Warranty.2 Non-maintenance item except for CA, MA, NY.3 Timing belt replacement only required for Special Operating Condition 3 as indicated on

page 30 of this supplement.

Dealer Service Verification

Page 224: Owners Manual

42

MAINTENANCE LOG

67,500 Miles or 54 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

65,000 Miles or 52 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

70,000 Miles or 56 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 225: Owners Manual

43

MAINTENANCE LOG

75,000 Miles or 60 Months*75,000 Miles or 60 Months*

� Replace engine oil and oil filter� Rotate tires� Inspect the following:

__ Exhaust pipes and mountings __ Ball joints and dust covers__ Brake: linings, discs/drums, lines, hoses __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Automatic transmission and differential oil__ Rack and pinion assy. for leakage __ Limited-slip differential oil (Supra)

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Inspect air filter� Replace automatic transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Page 226: Owners Manual

44

MAINTENANCE LOG

82,500 Miles or 66 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

80,000 Miles or 64 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

85,000 Miles or 68 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 227: Owners Manual

45

MAINTENANCE LOG

1 Maintenance service is required under the terms of the Emission Control Warranty.

90,000 Miles or 72 Months*90,000 Miles or 72 Months*

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Replace transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

� Inspect the following:__ Drive belts__ Fuel lines and connections, fuel

tank vapor vent system hoses,fuel tank band

__ Fuel tank cap gasket__ Exhaust pipes and mountings__ Brake: linings, discs/drums,

lines, hoses

__ Steering linkages__ Rack and pinion assy. for leakage__ Ball joints and dust covers__ Drive shaft boots (re-torque flange

bolts)__ Transmission and differential oil

� Replace engine oil and oil filter� Rotate tires� Replace engine air filter� Replace non-platinum spark plugs1

– Celica (7AFE), Corolla, Paseo,Tercel

� Replace engine coolant� Repack rear wheel bearings

(Tercel, Paseo)� Replace limited-slip differential oil

(Supra)

Dealer Service Verification

Page 228: Owners Manual

46

MAINTENANCE LOG

97,500 Miles or 78 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

95,000 Miles or 76 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

100,000 Miles or 80 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 229: Owners Manual

47

MAINTENANCE LOG

105,000 Miles or 84 Months*105,000 Miles or 84 Months*

� Replace engine oil and oil filter� Rotate tires� Inspect the following:

__ Drive belts __ Ball joints and dust covers__ Exhaust pipes and mountings __ Drive shaft boots (re-torque flange bolts)__ Brake: linings, discs/drums, lines, hoses __ Automatic transmission and differential oil__ Steering linkages __ Limited-slip differential oil (Supra)__ Rack and pinion assy. for leakage

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Inspect air filter� Replace automatic transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Page 230: Owners Manual

48

MAINTENANCE LOG

112,500 Miles or 90 Months*

*Use the white background boxes to follow 5,000-mile oil change intervals or the shaded background boxes to follow 7,500-mile oil change intervals. Please refer to page 29 ofthis supplement for further information and to determine which interval is right for your driving circumstances.

5,000-Mile Oil Change Intervals 7,500-Mile Oil Change Intervals

110,000 Miles or 88 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

115,000 Miles or 92 Months*

� Replace engine oil and oil filter� Rotate tires

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requiresthe additional maintenance items.

� Inspect the following:__ Air filter __ Ball joints and dust covers__ Brake: linings, discs/drums __ Drive shaft boots (re-torque flange bolts)__ Steering linkages __ Body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

Dealer Service Verification

Dealer Service VerificationDate:__________________________________

Mileage:___________________

� Replace engine oil and oil filter

� Rotate tires

Page 231: Owners Manual

49

MAINTENANCE LOG

120 Months120 Months

� Inspect SRS Air Bag

Date: _________________________

Mileage: ________________

1 Maintenance service is required under the terms of the Emission Control Warranty.2 Non-maintenance item except for CA, MA, NY.3 Timing belt replacement only required for Special Operating Condition 3 as indicated on

page 30 of this supplement.

Dealer Service Verification

120,000 Miles or 96 Months*120,000 Miles or 96 Months*

Additional Maintenance Items for Special Operating Conditions:Please refer to page 30 of this supplement to determine if your Toyota requires the additionalmaintenance items.

� Replace timing belt3

� Replace transmission and differential oil� Inspect body/chassis nuts and bolts

Date: ____________________________

Mileage:___________________

� Inspect the following:__ Valves (audible inspection), adjust

if necessary__ Drive belts__ Fuel lines and connections, fuel tank

vapor vent system hoses,fuel tank band__ Fuel tank cap gasket__ Charcoal canister (144 months)2

__ Exhaust pipes and mountings

__ Brake: linings, discs/drums, lines, hoses__ Steering linkages__ Rack and pinion assy. for leakage__ Ball joints and dust covers__ Drive shaft boots (re-torque flange bolts)__ Transmission and differential oil

� Replace engine oil and oil filter� Rotate tires� Replace engine air filter� Replace spark plugs1

� Replace engine coolant� Repack rear wheel bearings

(Tercel, Paseo)� Replace limited-slip differential oil

(Supra)

Dealer Service Verification

Page 232: Owners Manual

50

SERVICE MANUALS

Official Toyota Service ManualsYou may prefer to do some of your ownservice work on your Toyota. Or, you maywant to be more knowledgeable when youtalk about your Toyota with the servicewriter or service manager at the dealer-ship. In either case, we have the servicemanuals with the information you need.

A complete line of Service Manuals isavailable for your Toyota, including theRepair Manual, Electrical Wiring Diagram,Automatic Transmission/Transaxle RepairManual,and replacement Owner’s Manuals,if needed.

For owners who wish to perform theirown maintenance and light repair, a newDo-It-Yourself Repair Manual is available forCamry and Tacoma models.

Vehicle Repair ManualThese are the same service and repair man-uals used by professional technicians inToyota dealerships throughout the U.S.Theyare fully illustrated and cover each of yourvehicle’s systems in considerable detail.■ Tune-up instructions and specifications.■ Repair procedures for all vehicle

mechanical systems, e.g., brakes, engine,transmission, and chassis.

Repair Manual Supplements■ Electrical Systems book provides de-

tailed electrical wiring diagrams for eachelectrical system in your vehicle.

■ Automatic Transmission/Transaxle Over-haul book covers procedures for overhaulof the automatic transmission/transaxle of your vehicle.

Do-It-Yourself Repair Manual■ Maintenance instructions.■ Light repair procedures for commonly

performed owner repairs.

Ordering ProceduresIf you wish to order one or more of themanuals, simply fill out both sides of theorder form, cut it out, and mail it to us, oryou can phone direct. If you are in any waydissatisfied with your order, return it within10 days for a full refund.

If you wish to place a CREDIT CARDORDER by telephone, please have yourcredit card handy when calling.

Only credit card orders can be acceptedby phone.

Toyota Service Publications 1-800-622-2033

Page 233: Owners Manual

51

SERVICE MANUALS

Service Manuals Order Form

Mail to:

TOYOTA SERVICE PUBLICATIONS750 W. Victoria St.Compton, CA 90220-5538

Complete both sides of form.

Name

Address

City State ZIP

Your Name (Print clearly) (Please, no currency)

� Money Order � VISA� MasterCard � Check (Payable to:

Toyota Service Publications)Daytime Phone # ( __ __ __ ) __ __ __ – __ __ __ __

Credit card orders can be made toll-free from 7:00 a.m. to 4:30 p.m. PST by calling 1-800-622-2033.

Credit Card No.

Expiration Date

Signature (Required if using credit card)

Page 234: Owners Manual

52

SERVICE MANUALS

Model Year

Vehicle I.D. Number (see inside driver’s door post)

† Call our “800” number for prices: 1-800-622-2033

* SALES TAX IS REQUIRED EXCEPT IN THE STATES LISTED BELOW:

DELAWARE NEW HAMPSHIREHAWAII OREGONMONTANA

NOTE: Manuals shipped to Alaska, Puerto Rico,Virgin Islands, and Hawaiishipped air only.

Price† Quantity Total

Repair ManualsCamry, Celica, Corolla, LandCruiser, RAV4, Paseo, Previa, 4Runner,

Supra,T100,Tacoma,Tercel, Avalon

Electrical Systems Manual(Available in all models listed above) †

Automatic Transmission Manualsand Transaxle Service Manuals †

(Available in all models listed above)

Owner’s Manual(Available in all models listed above) †

Do-It-Yourself Repair Manual(Camry and Tacoma models only) †

Subtotal

Sales Tax*

Surface

Air 1

Air 2 $

Total Order

Shipping and Handling**

(Choose Delivery Costone) time

Surface 2-3 weeks 6.00

Air 1*** 2 days 20.00

Air 2*** 3-4 days 12.00

** Shipping and handling costs reflect single manual orders only. For multiplemanuals, please call for charges. Shipping and handling for a single Owner’s Manual is $2.00 for surface delivery.

*** Air 1 and Air 2: No deliveries to P.O. Boxes or APO.

Foreign shipments shipped U.P.S. Air only. Applicable duty charges paidby customer.

Page 235: Owners Manual

53

Model Model Year

Body Style

Vehicle I.D. Number

In-Service Date

Mileage at Delivery

Key Number

Selling Dealer’s Name

Dealer Code

SPEEDOMETER REPLACEMENT RECORD

Speedometer Replaced on (Date)

with Miles on the Odometer

Toyota Dealer Signature

Name

Address

City State ZIP

Telephone

53

OWNER IDENTIFICATIONVEHICLE IDENTIFICATION

Page 236: Owners Manual

NOTES:

Page 237: Owners Manual

NOTES:

Page 238: Owners Manual

NOTES:

Page 239: Owners Manual

NOTES:

Page 240: Owners Manual

96-SPO-221

WE REALLY CARE ABOUT YOU –PLEASE BUCKLE UP.Toyota has made a special effort toencourage use of seat belts.Toyota belts are:■ Comfortable■ Easy to use■ ConvenientWe encourage you to use your belts every time you drive.

03toyota

00404-01997-CARPrinted in U.S.A.07/96

Page 241: Owners Manual

00404-01997-CARPrinted in U.S.A.07/96

00404-01997-TRKPrinted in U.S.A.07/96

Page 242: Owners Manual

Table of ContentsIn this manual you will find:

Warranty at a Glance 1

The Toyota Touch 2

How to Get Assistance 3

New Vehicle Limited Warranty• What Is Covered 4• What Is Not Covered 6• Owner’s Responsibilities 7

Federal Emission Warranty 9

California Emission ControlWarranty 13

Tire Limited Warranty 17

Arbitration 18

Seat Belt/Audio Systems 21

Extended Protection forYour Vehicle 22

Parts and Service 23

Toyota Parts Centers 24

Toyota Express Lube 25

Lifetime Guarantee Program 26

Genuine Toyota Fluids 27

Dealer Certificate 28

Scheduled Maintenance 29

Maintenance Log 34

Service Manuals 50

Vehicle Identification/Owner Identification 53

Passenger Car

1 9 9 7

O W N E R’ SM A N U A LSUPPLEMENT

PART 1

3toyota

Page 243: Owners Manual

This Is a Supplement to YourOwner’s Manual■ Keep this manual in your vehicle. In it

you will find warranties and informationabout Toyota parts and service, as well ashow to maintain your new Toyota.

■ Warranty information is provided to pro-tect your investment and outlines proce-dures for solving any problem you mayhave with your new Toyota. YourOwner’s Manual also contains importantinformation. Be sure to read it carefully.

■ Maintenance information for your Toyotais provided in the Scheduled Main-tenance section of this supplement.Thissection clearly indicates the minimummaintenance requirements for yourToyota based on your driving habits andoperating conditions.

■ The Scheduled Maintenance sectionof this supplement also includes aMaintenance Log which clearly identifiesthe specific maintenance requirementsfor each mileage interval while providingyou with a convenient place to docu-ment your Toyota’s maintenance history.

■ All information is based on the latest dataavailable at time of publication and issubject to change without notice,exceptthe emissions warranty.

■ Please be aware that any modification toyour Toyota could affect its performance,safety, or durability, and may even violategovernment regulations.

■ Please be aware that the failure to followprocedures specified in the Owner’sManual and this supplement could resultin voiding the warranty in whole orin part.

■ To further demonstrate our commitmentto your satisfaction with your Toyotavehicle, there may be times when Toyotawill establish a special policy adjustmentfor your particular vehicle model whichwill pay for all or part of the costs ofcertain repairs beyond normal warrantycoverage.

For more details please call your dealershipor call Toyota toll-free at 1-800-331-4331.

Page 244: Owners Manual

1

WARRANTY AT A GLANCE

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000

Service Adjustment 12

Basic 36

Original Equipment Battery 36

Powertrain 60

Corrosion Perforation 60

Federal Emission WarrantyComponent Defect

Related Parts 36

Specified Major Emission96Control Components

PerformanceRelated Parts 24

Specified Major Emission96Control Components

California Emission Control WarrantyComponent Defect

Related Parts 36

Specific Control Devices 84

Specified Major Emission96Control Components

PerformanceRelated Parts 36

Specified Major Emission96Control Components

NOTE: Tires warranted independently by tire manufacturer.

36,000

12,500

36,000

60,000

(unlimited)

36,000*

80,000

80,000

80,000

80,000

24,000

50,000

70,000

50,000

* Federal Environmental Protection Agency (EPA) regulations require a coverage of 2 years/24,000 miles for emission control components.However, Toyota will provide a coverage of 3 years/36,000 miles under terms of the Basic Warranty. In addition, specific components maybe entitled to additional coverage under terms of the Powertrain Warranty.

MILES IN SERVICE

MONTHS IN SERVICE

WARRANTY COVERAGE

Page 245: Owners Manual

2

THE TOYOTA TOUCH

What Is the Toyota Touch?It is our commitment to you. When youpurchase a Toyota car, truck, sport utilityvehicle,or van,we want you to derive evenmore satisfaction and receive even morevalue than you expect.

The Toyota Touch begins with designand engineering that leads the automobileindustry in quality, innovation, economy,reliability, styling, and performance. Our 36 month/36,000 mile limited basic war-ranty coverage, with longer limited war-ranty coverage for specific components,further demonstrates this commitment toyou—the customer. Throughout thislengthy warranty period, we are there tostand behind our product quality and YOU.

In addition to our lengthy limited war-ranty, the Toyota Touch is our commitmentto treat you the way you want to be treated.It means that every step of the way, fromyour first visit or phone call to a Toyotadealer, through purchase and delivery, toafter-sales service, we’re committed to thespirit as well as the letter of courteous, fair,and reasonable treatment.

The Toyota Touch is our way of doingbusiness with you. It’s as simple as a smile,a handshake, and a promise kept.

HAVE A QUESTION OR PROBLEM?Just ask for our

Customer RelationsManager.

YOUR SATISFACTION IS #1 WITH US.

Page 246: Owners Manual

3

HOW TO GET ASSISTANCE

To Our CustomersToyota has a commitment to you and yoursatisfaction. From your first phone call orvisit to the dealership, through the purchaseand delivery of your new Toyota, to after-sales service, your satisfaction is NumberOne with us.

If you should experience a problem orconcern, either within or outside of thewarranty period, please follow these proce-dures in the sequence listed for the fastestpossible response.

Step 1: Contact the DealershipCustomer Relations ManagerIf you have a question, concern, or com-plaint, just ask for the dealership CustomerRelations Manager. This person has beenspecially trained to understand the cus-tomer’s point of view when a question orproblem arises.

The Customer Relations Manager hasthe responsibility to resolve most cases andwill make every effort to conduct a fairreview of your situation.

Step 2: Call the Toyota CustomerAssistance CenterIf for any reason you still need assistanceafter contacting the dealership CustomerRelations Manager, please call Toyota’sCustomer Assistance Center toll-free at:

1-800-331-4331For our hearing and/or speech impaired

customers, please call toll-free at:

1-800-443-4999 (TDD)A Toyota Customer Assistance Represen-

tative will review your request and helpwith any further questions or problems youmay have regarding your vehicle warrantyor any special policy adjustments.

Note: In order to give you the greatest assistance possible, please help us by provid-ing the following information when you call:■ Vehicle Identification Number. (You will

find this 17-digit number located on thedriver’s side corner of the dash underthe window. It is also listed on your salescontract/invoice.)

■ Current mileage on your Toyota (ifapplicable).

■ Names of the selling and servicing dealerships.

■ Your daytime and evening phone numbers.

Step 3: ArbitrationIf you should experience a problem whichhas not been resolved to your satisfactionthrough Steps 1 and 2,Toyota offers addi-tional assistance through the Council ofBetter Business Bureaus’ (CBBBs’) BBBAUTO LINE arbitration program. CBBB serves as the administrator of the BBBAUTO LINE program. All arbitrators andtechnical experts are employed throughBBB AUTO LINE.

BBB AUTO LINE will resolve your com-plaint through arbitration — a process bywhich two or more parties authorize an inde-pendent third party to resolve the dispute.

This procedure is quick,easy to use, andoffered to you at no cost.

Please refer to the New Vehicle LimitedWarranty for additional information regard-ing the arbitration process.

Note: In Canada, assistance may beobtained from:Toyota Customer Service OfficeToyota Canada Inc.One Toyota PlaceScarborough, Ontario M1H1H9Canada1-800-263-7640 (Canada only)

Note: For information regarding specificstate regulations and notices, see theToyota Owner’s Manual SupplementPart 2 in your vehicle glove box.

Page 247: Owners Manual

4

NEW VEHICLE LIMITED WARRANTY

What Is Covered

WarrantorTOYOTA warrants each new 1997 vehicle.For the purpose of warranty in the main-land United States and Alaska, TOYOTA isToyota Motor Sales,U.S.A., Inc. (a Californiacorporation).

Warranty ApplicationThis warranty is applicable to any vehicle registered and normally operated in themainland United States, Alaska, and Canadaonly.

No ChargeWarranty repairs and adjustments (partsand/or labor) will be made at no charge.

Fully TransferableWarranty coverage is fully transferable at nocost to subsequent vehicle owners.

Warranty BeginsThe warranty period begins on the datethe vehicle is first delivered or put into use(in-service date).

Any implied warranty of merchantabil-ity or fitness for a particular purposeapplicable to this vehicle is limited tothe duration of the written warranty.Some states do not allow limitations onhow long an implied warranty lasts, sothe above limitation may not apply to you.

ArbitrationIn the unlikely event a dispute arises as to your warranty coverage, Toyota offersdispute resolution through arbitration provided by:

BBB AUTO LINE4200 Wilson Blvd., Suite 800Arlington,VA 22203

Arbitration is available to you free ofcharge. BBB AUTO LINE is designed to render a decision within 40 days from BBBAUTO LINE’s receipt of your request forarbitration. BBB AUTO LINE’s decision isbinding on Toyota but not on you.

IMPORTANT: You must use BBB AUTOLINE prior to seeking remedies avail-able to you through a court action pur-suant to the Magnuson-Moss WarrantyAct (the “Act”). In addition, you mustuse BBB AUTO LINE if you are requiredto do so prior to seeking remediesavailable under the “Lemon Law” ofyour state. See the appropriate pagein the Owner’s Manual Supplement Part 2 in your vehicle glove box forspecific requirements applicable inyour state. However, if your state lawpermits and if you choose to seekremedies which are not created by theAct, you are not required to use BBBAUTO LINE, although that option isstill available to you.

Please refer to pages 18–20 in this manualfor additional information regarding the arbitration process.

Basic Coverage PeriodThis warranty covers repairs to any part thatToyota supplies that is defective in materialsor workmanship under normal use, exceptthose items listed under “What Is Not Cov-ered,” for a period of 36 months or 36,000miles, whichever occurs first. Selected com-ponents are warranted for longer periods.

Page 248: Owners Manual

5

NEW VEHICLE LIMITED WARRANTY

ExceptionsThe items specified below are covered forperiods different from the basic coverage.

■ Air ConditionerAir conditioner refrigerant charge is cov-ered for the first 12 months, regardless ofmileage,unless done as part of a warrantyrepair.

■ AdjustmentsService adjustments — minor repairs notusually associated with the replacementof parts — are covered for the first 12months or 12,500 miles, whicheveroccurs first. (Note: Adjustments requiredto pass an emissions test are subject to theapplicable emission warranty coverage.)

PowertrainEngine, transmission, front wheel drive,rear wheel drive, and restraint system com-ponents are warranted against defects inmaterials or workmanship under normaluse, except those items listed under “WhatIs Not Covered,” for a period of 60 monthsor 60,000 miles, whichever occurs first,from the vehicle’s in-service date. Specificcomponents covered by this warranty areas follows:

■ Engine: Cylinder block, head, and allinternal parts, intake manifold, timinggears and gaskets, timing gear chain/beltand cover, flywheel, valve covers, oilpan, oil pump, engine mounts, waterpump, fuel pump, turbocharger housingand all internal parts, supercharger hous-ing, and all internal parts, engine controlcomputer, seals, and gaskets.

■ Transmission and Transaxle: Case andall internal parts, torque converter, clutchcover, transmission mounts, transfer case,and all internal parts,engine control com-puter, seals, and gaskets.

■ Front Wheel Drive: Final drive housingand all internal parts, axle shafts, drive

shafts, constant velocity joints, front hub,and bearings, seals, and gaskets.

■ Rear Wheel Drive: Axle housing and allinternal parts, propeller shafts, U joints,axle shafts, drive shafts, bearings, sup-ports, seals, and gaskets.

■ Restraint System: Front seat belts, rearseat belts, and air bags.

For vehicles sold and registered in the stateof Kansas, the warranty for seat belts andrelated components is 10 years, regardlessof mileage.

Corrosion PerforationAny body sheet metal found under normaluse to have developed a perforation (holethrough the body panel) from corrosiondue to defects in materials or workmanshipis warranted for 60 months, regardless ofmileage. (Refer to page 8 for importantinformation about protecting your vehicle.)

TowingWhen your vehicle is inoperative due to a warranted part failure, towing serviceis covered to the nearest authorized dealership.

Page 249: Owners Manual

6

NEW VEHICLE LIMITED WARRANTY

What Is Not Covered

Factors Beyond the Manufacturer’s Control■ Repairs and adjustments required as a

result of misuse (for example,racing,over-loading), negligence, modification, alter-ation,tampering,disconnection,improperadjustments unless performed by a deal-ership during warranty repair work orrepairs, accident, and use of add-onparts/materials are not covered.

■ Cosmetic conditions or surface corrosionfrom stone chips or scratches in the paintare not covered.

■ Damage or surface corrosion from theenvironment such as acid rain, airbornefallout (chemicals, tree sap, etc.), salt,hail, windstorms, lightning, floods, otheracts of God, and the like is not covered.

Lack of Maintenance or Use ofWrong Fuel, Oil, Lubricants, or Fluids■ Repairs and adjustments caused by im-

proper maintenance, lack of requiredmaintenance, or the use of fluids otherthan fluids specified in the Owner’sManual are not covered.

Maintenance Is at Owner’s Expense■ Engine tune-up, lubrication, cleaning and

polishing, replacement of filters, coolant,fuses,worn wiper blades,and worn brakepads and linings or clutch linings aresome of the normal maintenance servicesall vehicles require and are not covered.Required scheduled maintenance isexplained in this supplement.

Normal Noise, Vibration, andDeterioration■ Normal noise,vibration,wear and tear, and

deterioration such as discoloration, fading,deformation,or blur are not covered.

Altered Mileage■ Failure of a vehicle on which the odome-

ter mileage has been altered or changedso that vehicle mileage cannot be readilyascertained is not covered.

Tires■ Tires are warranted under a separate war-

ranty provided by the tire manufacturer.Refer to page 17 for tire manufacturerinformation and warranty details.

Scrapped or Salvaged Vehicles■ A vehicle which has been damaged to

such an extent that the owner or theinstitution financing, leasing, or insuringthe vehicle considers it uneconomical torepair it and,as a result, the vehicle is notrepaired by or for the person who ownsthe vehicle at the time of the event result-ing in the damage is not covered by theToyota New Vehicle Limited Warranty,with the exception of any applicableEmission Warranty. This includes, but isnot limited to, those vehicles which arecurrently or were previously titled as“scrap,”“salvage,” or “dismantled.”

Extra Expenses and DamagesToyota does not authorize any person tocreate for it any other obligation or liability in connection with this vehicle.ANY IMPLIED WARRANTY OF MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TOTHIS VEHICLE IS LIMITED TO THEDURATION OF THIS WRITTEN WAR-RANTY. The performance of repairs andneeded adjustments is the exclusiveremedy under this warranty or anyimplied warranty.

Page 250: Owners Manual

7

NEW VEHICLE LIMITED WARRANTY

TOYOTA SHALL NOT BE LIABLE FORINCIDENTAL OR CONSEQUENTIAL DAM-AGES (FOR OTHER THAN INJURYTO THE PERSON) RESULTING FROMBREACH OF THIS WRITTEN WARRANTYOR ANY IMPLIED WARRANTY.

Some states do not allow limitationson how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the abovelimitations may not apply to you.

This warranty gives you specific legalrights, and you may also have other rightswhich vary from state to state.

Owner’s ResponsibilitiesObtaining Warranty ServiceYou are responsible for delivering your vehi-cle to any authorized Toyota dealer in themainland U.S.(excluding Hawaii),Alaska,andCanada in order to obtain warranty service.

MaintenanceYou are responsible for properly operating,maintaining, and caring for your Toyotain accordance with the instructions con-tained in your Owner’s Manual and thissupplement.

If your vehicle is subject to use undersevere driving conditions, you shouldfollow the maintenance requirementsspecified accordingly in the ScheduledMaintenance section of this supplement.

Maintenance RecordsYou are responsible for keeping mainte-nance records since it may be necessary insome instances for you to show that therequired maintenance has been performed.

The Maintenance Log in the ScheduledMaintenance section of this supplementprovides a convenient way to track andrecord your vehicle’s maintenance history.

Where to Go for Warranty ServiceYour Toyota dealer will make the necessaryrepairs or adjustments using new or remanu-factured parts. Repair or replacement of apart is at the discretion of the Toyota dealer.While any Toyota dealer in the mainlandU.S., Alaska, and Canada will perform warranty service, Toyota recommends thatyou return to the dealership which sold youyour vehicle because of their continued andpersonal interest in you.

Customer AssistanceShould you have any questions regardingyour warranty coverages or wish to inquireabout a special policy adjustment coveringyour vehicle, please contact the dealershipor call Toyota toll-free at 1-800-331-4331.

Note: Your dealer may recommendmore frequent intervals or mayinclude items which are in addition to those listed in the ScheduledMaintenance section of this booklet.These additional services are not required to maintain your warrantycoverage. Please see your dealer for anexplanation of any maintenance rec-ommendations which are not part ofyour vehicle’s maintenance schedule.

Page 251: Owners Manual

8

NEW VEHICLE LIMITED WARRANTY

Touring/Relocating Outside theMainland United States, Alaska,and CanadaIf you are touring or relocating outside themainland U.S., Alaska, and Canada, and aproblem arises, please consult a localToyota dealer. Please note, however, thatwarranty service may not be provided bythe local dealer because the local Toyotadistributor may have no obligation to pro-vide warranty service to your vehicle,and/or your Toyota may not comply withthe regulatory and/or environmentalrequirements of such country.

What Can You Do to Help ProtectYour Toyota Against Corrosion?In order to help protect your vehicleagainst corrosion, it is important that youcare for your vehicle regularly, followingthese suggestions:■ Wash regularly using cold, clean water

and a mild vehicle wash soap.■ If insects, tar, or other similar deposits

have accumulated on your vehicle, washit as soon as possible.

■ Wash your vehicle in the shade.■ Under certain conditions, special care

should be taken to protect your Toyotaagainst corrosion.If you drive on salted ordust-controlled roads, or if you drive nearthe ocean, hose off the undercarriage atleast once a month.

■ It is important that the drain holes in thelower edges of the doors and rocker pan-els be kept clear.

■ If you detect any stone chips or scratchesin the paint, touch them up immediately.

■ If you do much driving on gravel roads,consider installing mud or stone shieldsbehind each wheel.

■ If you carry special cargo, such as chemi-cals, fertilizers, de-icer salt, etc., be surethat such materials are well-packagedand sealed.

■ If your Toyota is damaged due to an accident or similar cause which destroysthe paint and protective coating, haveyour vehicle repaired as soon as possible.The cost of such repairs is considered theresponsibility of the owner.

This corrosion warranty does not covernon-genuine Toyota sheet metal partsor damage caused by the installation ofsuch non-genuine Toyota sheet metalparts.

Application of additional rust-inhibiting materials is not necessary toprotect your new Toyota, nor is itrequired in order to keep the five-yearwarranty coverage in effect.

Page 252: Owners Manual

9

FEDERAL EMISSION WARRANTY

Emission Defect WarrantyTOYOTA warrants to the retail purchaserand each subsequent purchaser that theToyota vehicle:■ Was designed, built, and equipped so as

to conform at the time of sale with regu-lations of the U.S. Environmental Protec-tion Agency (EPA) as may be applicable.

■ Is free from defects in materials and work-manship which may cause the vehicle tofail to conform with the above-mentionedapplicable regulations.

EPA regulations require that the warranty is in effect for two years from the date the vehicle is first put into service or 24,000miles, whichever occurs first. However,Toyota will provide you a coverage of threeyears or 36,000 miles, whichever occursfirst, under the terms of the Basic Warranty.In addition, specific components may beentitled to additional coverage under termsof the Powertrain Warranty.

EPA regulations also require that thewarranty for specified major emission control components designated by (*) is in effect for eight years or 80,000 miles,whichever occurs first.

The emission control parts covered bythis warranty are listed on page 10.

Emission Performance WarrantySome states and local jurisdictions haveestablished periodic vehicle inspection andmaintenance (I/M) programs to encourageproper maintenance of your vehicle. If anEPA-approved I/M program is in force inyour area, you are eligible for emission performance warranty coverage.

EPA regulations require that Toyotamake all necessary adjustments, repairs, orreplacements at no cost to you if:■ Your vehicle fails to conform to applicable

emission standards as determined in anEPA-approved emission test, and

■ Such failure results or will result in yourhaving to bear any penalty or other sanc-tions under local, state, or federal law.

EPA regulations require that the warranty is in effect for two years from the date thevehicle is first put into service or 24,000miles, whichever occurs first.

In addition, EPA regulations require thatthe warranty for specified major emissioncontrol components designated by (*) is in effect for eight years or 80,000 miles,whichever occurs first.

The emission control parts covered by this warranty are listed on page 10 of this supplement.

Note: Vehicles equipped with a CaliforniaCertified Emission Control System and registered and normally operated in thestate of California or Massachusetts arealso entitled to the California EmissionWarranty.(See page 13 of this supplement.)

Page 253: Owners Manual

10

FEDERAL EMISSION WARRANTY

Warranty Parts List

AIR/FUEL METERING SYSTEM•EFI Components

Airflow SensorThrottle BodyEngine Control Module*Other Components

•Cold Start Enrichment System•Deceleration Control•Air/Fuel Ratio Feedback Control System

AIR INDUCTION SYSTEM• Intake Manifold and Intake Air Surge Tank•Turbocharger/Supercharger•Charge Air Cooler

IGNITION SYSTEM•Distributor and Internal Parts•Spark Plugs**• Ignition Coil and Ignitor• Ignition Wires

POSITIVE CRANKCASE VENTILATIONSYSTEM (PCV)•PCV Valve or PCV Orifice•Oil Filler Cap

EVAPORATIVE CONTROL SYSTEM•Charcoal Canister•Vapor Liquid Separator•Fuel Tank•Fuel Filler Cap

EGR SYSTEM•EGR Valve•Associated Parts

AIR INJECTION SYSTEM•Air Injection Pump•Airflow Control Valves•Air Injection Manifold

CATALYST SYSTEM•Catalytic Converter and Protector*•Constricted Fuel Filler Neck•Exhaust Manifold•Exhaust Pipe (Manifold to Catalyst

and/or Catalyst to Catalyst)

MISCELLANEOUS ITEMS USED IN ABOVE SYSTEMS•Data Link Connector*•Sensors, Switches, and Valves•Hoses, Clamps, Fittings,Tubing, Sealing

Gaskets or Devices, and MountingHardware

•Pulleys, Belts, and Idlers•Bulbs for malfunctioning indicator

(Engine system warning light)***Spark plugs warranted until first required

maintenance only.

What Is Not Covered

Noncompliance caused by defective re-placement parts not certified in accordancewith the aftermarket parts certification reg-ulations is not covered.

Noncompliance caused by the use of re-placement parts not equivalent to originalequipment parts is not covered.

Other provisions specified under the“What Is Not Covered” section in the NewVehicle Limited Warranty are also applica-ble to this warranty.

Page 254: Owners Manual

11

FEDERAL EMISSION WARRANTY

Facts About the EmissionWarranty

Replacement PartsThe emission control systems of your vehi-cle were designed, built, and tested usingGenuine Toyota Parts.Your vehicle is certi-fied as conforming to applicable federalemission control regulations. Therefore, itis recommended that Genuine Toyota Partsbe used as replacement parts.

Use of parts certified in accordancewith aftermarket parts certificationregulations for repairs and/or mainte-nance that are paid for by you will not affect the emission warranty cov-erage. However, use of replacementparts that are not of equivalent qualitymay impair the effectiveness ofthe emission control systems. Non-compliance caused by defectivereplacement parts not certified inaccordance with aftermarket partscertification regulations or caused bythe use of replacement parts notequivalent to original equipment partsis not covered.

Repairs and MaintenanceThe use of any automotive repair estab-lishment or individuals who regularlyengage in the business of servicingautomobiles for the performance of the maintenance, replacement, orrepair of emission control devices and systems that are paid for by youdoes not affect the emission warranty.

Owner’s ResponsibilityIt is your responsibility to ensure that thevehicle is maintained and operated in accor-dance with the written instructions forproper maintenance and use as specified inyour Owner’s Manual and this supplement.

In an emergency situation, or to rectifyan unsafe condition where an authorizedToyota dealer is not reasonably available,you may perform the repair, or have therepair performed at any service establish-ment or by a person of your choosing.You will then be required to present thereplaced parts and paid repair invoices to an authorized Toyota dealer for reim-bursement of the reasonable emergencyrepair cost.

Maintenance records and receipts shouldbe transferred to each subsequent owner.Toyota will not refuse warranty servicebased solely on the lack of maintenance orthe lack of records showing the mainte-nance was performed, except when failuresare caused by the lack of maintenance.

If you use certified replacement parts thathave maintenance or replacement intervalsdifferent from those specified in this supple-ment, you must follow the maintenance andreplacement schedule for the certified parts.

Page 255: Owners Manual

12

FEDERAL EMISSION WARRANTY

Filing a Claim With ToyotaA claim may be raised immediately upon thefailure of an EPA-approved emission test byfollowing these steps:1. Take the failed vehicle to any authorized

Toyota dealer and present a copy of theemission short test report as evidence offailure. Also, take your maintenancerecords in case they are needed.

2. The Toyota dealership will inspect yourvehicle and determine the warranty ap-plicability within a reasonable period oftime (not to exceed 30 days) from your initial vehicle delivery date to any author-ized Toyota dealership or within the timeperiod required by local or state law.

3. If for any reason the claim is denied,a written explanation will be presentedto you.

4. If Toyota fails to notify you of its decisionwithin the time specified at left for rea-sons other than those listed below,Toyota shall be responsible for repairingthe vehicle free of charge.■ Delay is requested by you.■ Delay is caused by factors beyond

the control of Toyota or Toyotadealerships.

5. If you wish to obtain further informationregarding the emission performancewarranty, or if you have failed to receivesatisfactory assistance from TOYOTAby following the problem resolutionsteps outlined in the “How to GetAssistance” section of this supplement,you may contact:

Director, Field Operations andSupport Division (EN 397F)Environmental Protection Agency401 M Street SWWashington, D.C. 20460

Page 256: Owners Manual

13

CALIFORNIA EMISSION CONTROL WARRANTY

Your Warranty Rights andObligationsThe California Air Resources Board (CARB)and Toyota are pleased to explain the emis-sion control system warranty on your 1997vehicle. In California, new motor vehiclesmust be designed, built, and equipped tomeet the state’s stringent anti-smog stan-dards. CARB regulations require that Toyotamust warrant the emission control systemon your vehicle for the periods of time listed below, provided there has been noabuse, neglect, or improper maintenance of your vehicle.

Your emission control system may includeparts such as the fuel-injection system, theignition system, catalytic converter, andengine computer. Also included may behoses, belts, connectors, and other emission-related assemblies.

Where a warrantable condition exists,Toyota will repair your vehicle at no cost toyou, including diagnosis, parts, and labor.

Manufacturer’s Warranty Coverage1. For 3 years or 50,000 miles, whichever

occurs first:■ If your vehicle fails a smog check

inspection, all necessary repairs andadjustments will be made by Toyota toensure that your vehicle passes the in-spection.This is your emission controlsystem PERFORMANCE WARRANTY.

■ If any emission-related part on your vehicle is defective, that part will berepaired or replaced by Toyota. This is your short-term emission control system DEFECTS WARRANTY. In addi-tion, you may be entitled to additionalcoverage under terms of the power-train warranty.

2. For seven years or 70,000 miles,whichever occurs first:■ If an emission-related part listed in this

supplement specially noted withcoverage for seven years or 70,000miles is defective, the part will berepaired or replaced by Toyota.This isyour long-term emission control sys-tem DEFECTS WARRANTY.

Owner’s Warranty ResponsibilitiesAs the vehicle owner, you are responsiblefor the performance of the required mainte-nance listed in your Owner’s Manual andthis supplement. Toyota recommends thatyou retain all receipts covering maintenanceon your vehicle, but Toyota cannot denywarranty solely for the lack of receipts orfor your failure to ensure the performanceof all scheduled maintenance.

You are responsible for presenting yourvehicle to a Toyota dealer as soon as a problem exists.The warranty repairs shouldbe completed in a reasonable amount oftime, not to exceed 30 days.

As the vehicle owner,you should also beaware that Toyota may deny you warrantycoverage if your vehicle or a part has faileddue to abuse, neglect, improper mainte-nance, or unapproved modifications.

If you have any questions regarding yourwarranty rights and responsibilities, youshould contact Toyota’s Customer Assis-tance Center toll-free at 1-800-331-4331 orthe California Air Resources Board at 9528Telstar Avenue, El Monte, CA 91731.

Page 257: Owners Manual

14

CALIFORNIA EMISSION CONTROL WARRANTY

Other Warranty Terms■ The warranty period begins on the date

the vehicle is first delivered to the ulti-mate purchaser or on the date it is firstplaced in service as a “demonstrator” or“company” car.

■ Parts that are scheduled for replacementas required maintenance are warrantedup to their first replacement point.

■ If you use a replacement part that hasmaintenance or replacement intervals different from those specified in this sup-plement, you must follow the mainte-nance and replacement schedule for thereplacement part.

■ Maintenance records and receipts shouldbe transferred to each subsequent owner.

■ After the three years or 50,000 miles emis-sion performance warranty period haspassed, a defect in a part which iswarranted for seven years or 70,000 mileslong-term emission defect warranty foundduring a smog check test failure is cov-ered. In addition to the California emis-sion performance warranty,Toyota wouldlike to inform you that your vehicle is alsosubject to Federal emission performancewarranty guidelines applicable to specifiedmajor emission control components for aperiod of eight years or 80,000 miles. See

page 8 of this supplement for an explana-tion of this warranty coverage.

■ The defect warranty covers any part onthe vehicle which affects any regulatedemissions.

What Is Not CoveredThese warranty obligations will not apply:■ Should tampering, abuse, neglect, or im-

proper maintenance be found as the directcause of the need for repair, replacement,or adjustment.

■ Should noncompliance be caused by theuse of replacement parts not equivalentto original Toyota parts.

Other provisions specified under the “WhatIs Not Covered” section in the New VehicleLimited Warranty are also applicable tothese warranties.

Long-Term Emission SystemDefect Warranty Parts ListThe parts on this list are covered for aperiod of seven years or 70,000 miles,whichever occurs first.

AIR/FUEL METERING SYSTEM•Engine Control Module•Throttle Body

•Volume Air Flow Sensor•Mass Air Flow Sensor•Manifold Absolute Pressure Sensor• Idle Air Control Valve on Supra and

Land Cruiser Wagon 4WD•Injector on Supra equipped with 2JZ-GTE

AIR INDUCTION SYSTEM• Intake Manifold and Intake Air Surge Tank• Intake Manifold Gasket on RAV4 2WD,

RAV4 4WD, Land Cruiser Wagon 4WD•Charge Air Cooler•Supercharger•Turbocharger• Intake Air Control Valve

IGNITION SYSTEM•Distributor and Internal Parts•Knock Sensor on Camry and Avalon

equipped with 1MZ-FE;Previa,Previa All-Trac; T100 2WD, T100 4WD; Tacoma2WD, Tacoma 4WD; 4Runner 2WD,4Runner 4WD equipped with 5 Z-FE

• Ignitor on AvalonCATALYST SYSTEM•Exhaust Manifold on Supra equipped with 2JZ-GTE,Camry and Avalon equipped with1MZ-FE

•Right Exhaust Manifold Gasket on Camryand Avalon equipped with 1MZ-FE

•Catalytic Converter (Warm-Up Three-Way Catalyst)

Page 258: Owners Manual

15

CALIFORNIA EMISSION CONTROL WARRANTY

•Exhaust Front Pipe on Tercel, Paseo,Camry, Avalon, Supra, Previa, Previa All-Trac,Land Cruiser Wagon 4WD,4Runner2WD, 4Runner 4WD

•Exhaust Center Pipe on Previa, PreviaAll-Trac,T100 2WD,T100 4WD

•Turbine Outlet Elbow

EVAPORATIVE CONTROL SYSTEM•Fuel Tank

EGR SYSTEM•EGR Pipe on Land Cruiser Wagon 4WD

Facts About the Emission Warranty

Replacement PartsThe emission control systems of your vehi-cle were designed, built, and tested usingGenuine Toyota Parts, and the vehicle iscertified as being in conformity withapplicable federal and California emissioncontrol regulations.Therefore, it is recom-mended that replacement parts used beGenuine Toyota Parts.

Use of parts that are equivalent toGenuine Toyota Parts for repairs and/or

maintenance that are paid for by youwill not affect the emission warrantycoverage. However, use of replacementparts that are not of equivalent qualitymay impair the effectiveness of theemission control systems. If other thanGenuine Toyota Parts are used for main-tenance, replacement or repair of com-ponents affecting emission control, youshould ensure that such parts are war-ranted by their manufacturers to beequivalent to Genuine Toyota Parts in calibration, performance, and durability.

Repairs and MaintenanceThe performance of required sched-uled maintenance by you or by a per-son of your choosing or the use of anyautomotive repair establishment orindividuals who regularly engage inthe business of servicing automobilesfor the performance of the mainte-nance, replacement, or repair of emis-sion control devices and systems thatare paid for by you does not affect theemission warranty.

Emergency RepairsIn an emergency situation or to rectify an unsafe condition where an authorizedToyota dealer is not reasonably available,or a part is not available within 30 days, ora repair is not completed within 30 days,you may perform the repair, or you mayhave the repair performed at any serviceestablishment or by a person of your choos-ing. Any replacement part may be used inan emergency situation; however, Toyotawill not assume liability for subsequent fail-ure caused by the use of non-equivalentparts unless you have taken steps to put thevehicle back in a conforming condition in atimely manner.You will then be required topresent the replaced parts and copies ofpaid repair invoices to an authorized Toyotadealer for reimbursement of expenses,including diagnostic charges, not to exceedthe manufacturer’s suggested retail pricefor all warranted parts replaced and laborcharges based on the manufacturer’srecommended time allowance for thewarranty repair and the geographicallyappropriate hourly labor rate.

Page 259: Owners Manual

16

CALIFORNIA EMISSION CONTROL WARRANTY

Filing a Claim With ToyotaTo file a claim for a defect, bring your vehicle to any authorized Toyota dealer.

If your vehicle fails a California smogcheck test, a claim may be raised by follow-ing these steps:1. Take the failed vehicle to any authorized

Toyota dealer and present a copy of theemission test report as evidence of fail-ure. Also, take your maintenance recordsin case they are needed.

2. If the repair is covered under warranty,the Toyota dealership will perform therepair within a reasonable period of time(not to exceed 30 days) from your initialvehicle delivery date to any authorizedToyota dealership or within the timeperiod required by local or state law.

3. If for any reason the claim is denied,a written explanation will be presentedto you.

4. If Toyota fails to notify you of its decisionwithin the time specified above for rea-sons other than those listed below,Toyota shall be responsible for repairingthe vehicle free of charge.■ Delay is requested by you.■ Delay is caused by factors beyond

the control of Toyota or Toyotadealerships.

5. If you have failed to receive satisfactoryassistance from TOYOTA by following theproblem resolution steps outlined in the“How to Get Assistance” section of thissupplement, you may contact:

California Air Resources BoardMobile Source Division9528 Telstar AvenueEl Monte, CA 917311-800-242-4450

Director, Field Operations and Support Division (EN397F)Environmental Protection Agency401 M Street SWWashington, D.C. 20460

Page 260: Owners Manual

17

TIRE LIMITED WARRANTY

What Is Covered

Each tire supplied as original equipment ona new 1997 Toyota vehicle is warranted separately by the tire manufacturer. Pleaserefer to the separate tire manufacturer’s warranty statement in your vehicle glovebox for exact coverage.

Obtaining Warranty ServiceYou are responsible for delivering the vehi-cle with the unserviceable tire to anyauthorized dealer of the tire manufacturerin order to obtain warranty service. For thelocation of authorized tire dealers, pleaserefer to your local telephone directory.Your Toyota dealer may also assist you inobtaining warranty coverage from the tiremanufacturer.

The Tire WarrantorsDetailed tire warranty information andregional customer service phone numbers(where applicable) can be obtained bycontacting the tire warrantors listed onthis page.

The Respective Tire Warrantors Are:Bridgestone/Firestone, Inc.One Bridgestone ParkNashville,TN 372141-800-847-3272

Toyo Tire (USA) Corporation6415 Katella Ave.Cypress, CA 906301-800-442-TOYO1-800-238-TOYO

Goodyear Tire and Rubber Company1144 East Market StreetAkron, OH 443161-800-321-2136

Yokohama Tire Corporation601 S.Acacia Ave.P.O. Box 4550Fullerton, CA 92631-45501-800-722-9888

Dunlop Tire CorporationP.O. Box 1109Buffalo, NY 142401-800-548-4714

Michelin North AmericaOne Parkway SouthP.O. Box 19001Greenville, SC 29602-90011-800-847-3435

Ohtsu Tire and Rubber Co., Ltd.2539 237th St., Unit-ATorrance, CA 905051-800-468-5448

General TireOne General StreetAkron, OH 44329-00071-800-847-3349

Page 261: Owners Manual

18

ARBITRATION

BBB AUTO LINE ArbitrationIf you should experience a problem whichhas not been resolved to your satisfactionthrough the first two steps of Toyota’s com-plaint handling process,Toyota offers addi-tional assistance through the COUNCIL OFBETTER BUSINESS BUREAUS’ (CBBBs’)BBB AUTO LINE arbitration program.

What Is BBB AUTO LINE?BBB AUTO LINE is comprised of local BBBprofessionals who are trained and experi-enced in arbitration.BBB will arbitrate yourcase by reviewing the facts, inspecting thevehicle, if necessary, and promptly render-ing a fair and equitable decision.

What Types of Disputes Are Eligible?BBB AUTO LINE arbitrates disputes involv-ing Toyota’s product reliability or warrantyperformance which arise during the greaterof 1) three years or 36,000 miles from the vehicle’s in-service date, whichever is earlier,or 2) the applicable provision of Toyota’sNew Vehicle Limited Warranty. However,BBB AUTO LINE will not arbitrate claimsinvolving a vehicle used primarily for com-mercial purposes unless the “Lemon Law”ofyour state covers vehicles used for commer-cial purposes or claims that an air bag failed

to deploy or deployed when it should nothave.You must file a request for arbitrationwith BBB AUTO LINE within 60 days of theexpiration of the eligibility period, providedthe concern or alleged defect was broughtto the attention of Toyota or one of its dealers during the eligibility period.

How Long Is the Arbitration Process?The entire process, from the time BBBAUTO LINE receives your request for arbi-tration to the arbitrator’s decision, is de-signed to take no more than 40 days. Insome cases a decision may be delayedbecause of:■ Your failure to provide certain informa-

tion required by BBB AUTO LINE or yourfailure to make the vehicle available forinspection by BBB AUTO LINE in a timelymanner when an inspection is necessary.

■ Your failure to contact Toyota about yourdispute before requesting arbitration.

The letter from BBB AUTO LINE advisingyou of its decision will specify that Toyotamust comply with the decision shortly,usu-ally within 30 calendar days. CBBB will contact you to ensure that Toyota has com-plied in a timely manner.

How Much Will it Cost?There is no charge to you for submittingyour dispute to BBB AUTO LINE.You mayobtain copies of your case for a nominal feefrom CBBB.

When to Use BBB AUTO LINEBecause most situations can be resolved by our customer satisfaction network, werecommend that you request arbitra-tion only after utilizing Toyota’s Steps 1 and 2 of the customer assistance processdescribed earlier on page 3.

You must use BBB AUTO LINE priorto seeking remedies available to youthrough a court action pursuant to theMagnuson-Moss Warranty Act (the“Act”). In addition, you must use BBBAUTO LINE if you are required to do soprior to seeking remedies availableunder the “Lemon Law” of your state.See the appropriate page in the Owner’sManual Supplement Part 2 in your vehi-cle glove box for specific requirementsapplicable in your state. However, ifyour state law permits and if you chooseto seek remedies which are not createdby the Act, you are not required to useBBB AUTO LINE, although that option is still available to you.

Page 262: Owners Manual

19

ARBITRATION

How to Request ArbitrationComplete the BBB AUTO LINE CustomerClaim form, available through Toyota’sCustomer Assistance Center (by calling toll-free at 1-800-331-4331) or found at the center of your Toyota Owner’s ManualSupplement Part 2. You will need the following information:■ Vehicle year, make, model, vehicle identi-

fication number (VIN), mileage, date ofpurchase.

■ A brief description of your complaint andactions you have taken to resolve it.

■ Enclose copies of invoices with your re-quest for arbitration if you are seekingreimbursement for repairs or related inci-dental expenses.

■ What action or remedy would resolveyour problem.

Send your request to:

BBB AUTO LINE4200 Wilson Blvd., Suite 800Arlington,VA 22203

How Does the ArbitrationProcess Work?When BBB AUTO LINE receives yourrequest, it will be forwarded to the Toyotaregional office/private distributor forresponse.

After receiving and analyzing all pertinentdocumentation, if applicable, BBB AUTOLINE will schedule a technical evaluation.This may include an inspection of the vehi-cle with a Toyota representative present.

An oral hearing will be held prior to thedecision being rendered if you request it.

At the oral hearing, all evidence is admis-sible. In an oral hearing, you and a Toyotarepresentative will present both sides of thecase to the BBB AUTO LINE arbitrator. Eachof you will be allotted approximately 30minutes to give testimony and provide docu-ments. Then you and Toyota will be givenapproximately 10 minutes each for rebuttal.

A settlement satisfactory to all parties maybe negotiated during the mediation/arbitra-tion process prior to submission of the caseto the arbitrator.

If a technical evaluation was made, thetechnical expert will forward the technicalevaluation report to the BBB AUTO LINEprogram.

At the oral hearing,an arbitrator will listento all testimony and review all of the infor-mation available and the applicable legal standards and render a decision within 10days of hearing completion.

What Types of Decisions Are Rendered, and How Do I Know If Toyota Will Abide by BBB AUTOLINE’s Decision?BBB AUTO LINE’s decisions are based onwhat it believes is fair and appropriate underthe circumstances after applying the appro-priate legal standards. Remedies include,but are not limited to, repairs; reimburse-ment for repair or incidental expenses, suchas towing costs; or repurchase or replace-ment of your vehicle. BBB AUTO LINE’s decision is binding on Toyota, but not on you, the customer. Toyota must comply withthe decision shortly after it is rendered,usually within 30 days.CBBB will contact youwithin 10 working days of scheduled performance to ensure that Toyota has com-plied with the decision in a timely manner.

Page 263: Owners Manual

20

ARBITRATION

Are There Limits on the Scope ofBBB AUTO LINE Decisions?BBB AUTO LINE decisions will not include:■ Attorney Fees■ Punitive Damages■ Multiple Damages■ Consequential Damages other than

incidental damages which you may beentitled to under law.

What Other Recourse DoI Have Available?If you are dissatisfied with the arbitrator’sdecision or Toyota’s performance, you maypursue any other legal remedies which youmay have including small claims court.Youshould be aware that the arbitration findingsare admissible as evidence in any subse-quent legal proceedings concerning yourdispute.

Is the BBB AUTO LINE ProgramSubject to Change?The information about BBB AUTO LINE inthis Owner’s Manual Supplement was correct as of the date of printing.The pro-gram may, however, be changed withoutnotice. Contact Toyota at 1-800-331-4331 or BBB AUTO LINE if you have any ques-tions about BBB AUTO LINE.

Page 264: Owners Manual

21

SEAT BELT/AUDIO SYSTEMS

The Experts Say, “Buckle Up!”The importance of using seat belts cannotbe overemphasized. The safety experts from government and private organizationssay “Buckle Up!” Here are a few good reasons why:■ Properly adjusted seat belts can help

reduce driving fatigue and help the drivermaintain better vehicle control.

■ Studies show that generally the safestplace in a collision is inside your vehicle.Seat belts can help keep you there.

■ Eight out of ten injury accidents occur atspeeds under 40 mph, but even below 5 mph children can be injured duringquick turns or sudden stops. Childrenwho are too small to wear regular seatbelts should always be provided with aChild Restraint System dynamically testedto meet federal standards.

In addition to seat belts, many Toyota vehi-cles are equipped with both driver’s andpassenger’s side supplemental restraint sys-tems (SRS air bags). Air bags have beendesigned to supplement the three-point seatbelt by providing additional protection by

restraining the forward motion in the eventof a more serious frontal accident. The SRSdoes not replace use of the seat belt. Toobtain maximum protection in an accident,the driver and all passengers in the vehicleshould always wear their seat belts.

Get That Good FeelingFamiliarize yourself with the operation ofyour seat belts, as explained in yourOwner’s Manual. Wear them every timeyou drive your new Toyota, and encouragethose who ride with you to do the same.

Remember: For peace of mind, buckleup … it’s a good feeling!

Audio SystemsYour Toyota’s original equipment radio andsound system components are coveredunder the terms of the Toyota New VehicleLimited Warranty.

In the unlikely event your radio doesrequire service, any authorized Toyota dealer is prepared to minimize inconve-nience by exchanging your radio/sound system rather than sending it out for repair.

How it works:■ If the dealership determines that the radio

cannot be repaired at the dealership, theywill order a replacement radio and returnyour car to you.

■ Once your replacement radio arrives atthe dealership (usually within a few days),it will be installed in your vehicle at yourconvenience and you’re on your way!

Note: In general, radio performance andparticularly FM reception may be affectedby such factors as natural terrain, man-made obstacles, and your distance from theradio station’s transmitter. Please consultyour Owner’s Manual for further informa-tion on radio operation and performance.

Page 265: Owners Manual

22

EXTENDED PROTECTION FOR YOUR VEHICLE

Long-Term CommitmentToyota is committed to your long-term sat-isfaction. It is our commitment to providequality service for as long as you own yournew Toyota, no matter how long that may be.

Today’s marketplace has seen vehicle re-placement costs accelerate, and many of ourcustomers are deciding to keep theirToyotas longer. Consequently, many of youare concerned about the potential costs formajor repairs as your Toyota ages. It is forthis reason that more than 1,100 Toyotadealerships across the country now offerToyota “Extra Care” or a similar serviceagreement for your vehicle.

Extended ProtectionThe Vehicle Service Agreement providesextended protection against unexpectedrepairs beyond the factory warranty onyour Toyota. It helps you minimize the riskof these potential future costs.

Various service agreements are availableto meet almost every vehicle protectionneed. Most plans offer additional serviceconveniences:■ Nationwide coverage■ Vehicle towing■ Substitute transportation■ Protection when you travel■ Transferability■ Easy claim serviceVehicle service agreements may be pur-chased directly through your local Toyotadealer. Each program is specific as to time,mileage, and component coverages. It is toyour advantage to select a vehicle serviceagreement program that fully provides theextended coverage you desire.Your Toyotadealer can help you select the plan that isbest for your protection needs.

Preventive ServiceToyota is also aware that in today’s marketthe cost of keeping a vehicle well maintainedis ever increasing. Your Toyota dealer canhelp you manage service costs by offeringyou the option of pre-paying for vital ser-vices and inspections for your new Toyota.Toyota Auto Care or similar preventive service plans are offered by most Toyota dealers.These plans, like Toyota Auto Care,may include some of the following benefits:■ Engine oil and filter change■ Lubrication of key chassis parts■ 19-point inspection■ Emergency 24-hour roadside assistance■ Timed service reminders■ Computerized service history■ TransferabilityDifferent intervals may be selected to meetyour specific service needs. Ask your Toyotadealer about the many different plans available to help protect your vehicle for theyears ahead.

Page 266: Owners Manual

23

PARTS AND SERVICE

Toyota Quality ServicePart of the care that all vehicles require isregular replenishment of fluids, lubricants,and maintenance parts to guard againstpremature wear or failure. In addition, reg-ular inspection of a vehicle’s overallmechanical condition by trained techni-cians can provide the opportunity forminor repairs to be carried out quickly andeconomically before they lead to moreextensive problems. Toyota’s Recom-mended Maintenance Schedule providesfactory-recommended guides for mainte-nance and inspection based on mileage,time, and the conditions under which thevehicle is regularly driven.

With proper maintenance, your Toyotawill last longer and deliver maximum per-formance and reliability. Please see page 29for your model’s recommended mainte-nance schedule. Follow the schedule tohelp your Toyota serve you economicallyfor many years to come.

Toyota Supports TechnicianCertificationThe skill of the technician who actually services or repairs your Toyota is vitallyimportant to your vehicle’s operation andefficiency. To make sure your Toyota dealergives you the best service available any-where, Toyota created the Toyota CertifiedTechnician Program. In addition, over 90percent of all Toyota dealers participate inthe technician certification program of theNational Institute for Automotive ServiceExcellence (ASE).

Certified technicians are proven profes-sionals. They have earned their certifica-tion by attending Toyota Technical Trainingclasses and by passing a series of compre-hensive written examinations. Next timeyou visit, ask your Toyota dealer to showyou the technicians’ credentials.

Genuine Toyota PartsA network of more than 1,100 Toyota deal-ers throughout the U.S. is your guaranteedsource for quality Genuine Toyota Parts.Genuine Toyota Parts are engineered andmanufactured to the same high standardsof quality and performance built into everyToyota product.

This extensive dealer network is dedi-cated to providing the parts you need toservice your Toyota vehicle. Each dealer’sparts inventory is further supplementedby a nationwide system of 11 electronicallyconnected and strategically located ToyotaParts Distribution Centers. This comprehen-sive system provides the assurance that virtually any part from any Toyota vehicle inthe U.S.is readily available to meet your partsand service needs.

WE SUPPORT

Page 267: Owners Manual

24

TOYOTA PARTS CENTERS

Toyota Parts CentersA network of over 430 Toyota dealershipsthroughout the U.S. offers one-stop shop-ping convenience for Toyota Do-It-Yourselfers. A Toyota Parts Center (TPC) isa parts store within the dealership thatoffers a full selection of automotive prod-ucts. Included are Genuine Toyota mainte-nance and repair parts, Genuine ToyotaAccessories, and a full line of brand namecar-care products at competitive prices.

Most TPCs are open Saturdays and someevenings. Expert technical help is availableto answer DIY parts questions. Also,“HowTo” brochures covering most commonmaintenance jobs and Toyota model-specific pocket application catalogs areavailable free of charge.

Stop by your local TPC and experiencethe service and value available to ToyotaDIYers.

FPO

Page 268: Owners Manual

25

TOYOTA EXPRESS LUBE

Toyota Express LubeToyota Express Lube dealers offer you a complete oil and filter change and 19-pointinspection,in 29 minutes or less, guaranteed,or your next one’s free! Toyota Express Lubecombines all the convenience and value ofa quick oil change with the quality andreliability of Genuine Toyota Parts and trainedtechnicians that you’ve come to trust.

For a Toyota Express Lube oil change, noappointment is ever necessary.Just follow thesigns and drive up to the Express Lube lane—you will be waited on promptly, and yourguaranteed 29 minute oil and filter changewill be done while you wait.And it’s a greatvalue too —Toyota Express Lube service istypically priced very competitively with fran-chised quick lube centers.

Call Toyota’s Customer AssistanceCenter at 1-800-331-4331 for the nearestToyota Express Lube location, and “Catchthe Express!”

FPO

Page 269: Owners Manual

26

LIFETIME GUARANTEE PROGRAM

A Commitment to Quality andCustomer SatisfactionToyota guarantees you’ll only have to payonce! That’s right; if replacement is ever necessary, for as long as you own the vehicle, Toyota provides complete parts andlabor coverage for mufflers, exhaust pipes,shock absorbers, struts, and strut cartridgeswhen you purchase these items and havethem installed by your authorized Toyotadealer. This Lifetime Guarantee is our way ofdemonstrating to you Toyota’s commitmentto quality and customer satisfaction.

Remember, these top-quality GenuineToyota Parts are manufactured to meetToyota’s high standards for fit and function.So don’t compromise; when replacementtime comes, count on your Toyota dealerfor a lifetime!

Toyota mufflers, exhaust pipes, shocks, struts, and strut cartridges are guaranteed to the original purchaser for the life of the vehicle when installed by an authorizedToyota dealer. See dealer for full details.

Compare LifetimeGuarantee Coverage

Theirs

Ours

* Some muffler shops–read their fine print and compare.

Toyota vs. OthersToyota Others*

• Muffler Yes Yes- Labor to replace Yes Yes

• Tail Pipe Yes No- Labor to replace Yes No

• Exhaust Pipes Yes No- Labor to replace Yes No

We Cover The Muffler, Pipes And Labor Too!

Page 270: Owners Manual

27

GENUINE TOYOTA FLUIDS

Genuine Toyota ChemicalsThe Toyota Chemical Line is engineered toserve your car care needs. Formulatedspecifically for use with Toyota vehicles,this quality lineup includes everything forthe care and maintenance of Toyota carsand trucks.

The Toyota Chemical Line includesappearance products, such as Liquid CarWash and Fabric Spot Remover, and serviceitems such as Rust Penetrants, BrakeCleaner, and EFI Injector Cleaner. All prod-ucts are produced to meet or exceedToyota’s warranty requirements.

Toyota Antifreeze/Coolant■ Helps provide excellent long-term corro-

sion protection.■ Does not contain silicates that may harm

water pump seals.■ Is specially formulated for Toyota engine

cooling systems.■ Is tested and approved by Toyota.■ Is produced to meet or exceed Toyota’s

warranty requirements.

Toyota Motor Oils■ Are specially formulated for Toyota

gasoline engines.■ Are tested and approved by Toyota.■ Are produced to meet or exceed Toyota’s

warranty requirements.

■ Are approved for Toyota turbochargedengines.

■ Are formulated to help save gas by reduc-ing engine friction.

FPO

Page 271: Owners Manual

28

DEALER CERTIFICATE

We (the Dealer) want you to know that atthe time your new ___________________is being delivered that:1. Based upon written notification furnished

by TOYOTA,we have knowledge that thisvehicle is covered by an EnvironmentalProtection Agency (EPA) Certificate ofConformity.

2. We have made a visual inspection limitedto those emission control devices or por-tions thereof which are visible withoutremoval or adjustment of any compo-nents or systems of the vehicle, whetheremission-related or otherwise. Basedupon such visual inspection, there are noapparent deficiencies in the installation ofemission control devices by TOYOTA.(“Emission control device” is limited forpurposes of this certificate to all devicesinstalled on a vehicle for the sole or pri-mary purpose of controlling vehicle emis-sions and which were not in general useprior to 1968.)

3. We have performed all emission controlsystem preparations required by TOYOTAprior to the sale of the vehicle,as set forthin the current predelivery service manualprovided by TOYOTA.

4. Except as may be provided in Paragraph5 below, if this vehicle fails an EPA-approved emission test prior to theexpiration of three months or 4,000miles (whichever comes first) from thedate or mileage at the time of deliveryto the ultimate purchaser, and the vehi-cle has been maintained and used inaccordance with the written instruc-tions for proper maintenance and use,then TOYOTA shall remedy the non-conformity free of charge to the vehicleowner under the terms of TOYOTA’semission performance warranty.

5. Check if the vehicle is a company car ordemonstrator and complete the following:

The vehicle with which this statementwas delivered was placed in service as ademonstrator or company car prior todelivery. TOYOTA’s emission perform-ance warranty period commenced on the date the vehicle was first placed inservice, namely on ___________________

Note: The dealer makes no representation or warranty that the emission control systemor any part thereof is without defect nor thatthe system will properly perform.TOYOTA’semission performance warranty referred toabove furnished with the vehicle is solely thatof the manufacturer.

This statement is required by section 207of the Clean Air Act (42 U.S.C. 7541) andthe EPA regulations issued thereunder.

(Dealership Name)

Page 272: Owners Manual

OWNER INFORMATION CHANGE

EVV

NAME/ADDRESS INFORMATION FORM

Check One:

Same Owner,Name and/or Address Changed

Mr. Mrs. Ms. Miss Dr.

Same Owner,Additional Driver

NewOwner

Do not include on future mailings

No Longer Have Vehicle—Sold orTraded to Individual Listed Below

Vehicle Identification Number (VIN)Effective Date ofThis Information Mo. Day Year

Individual

OR

Company:

First Name M.I. Last Name

Company Name

Address/P.O. Box

Apt./Suite Number

City

Home Telephone Number Ext.

State ZIP Code

-

- -

Social Security Number/Customer Reference

- -

Work Telephone Number Ext.

- -

Page 273: Owners Manual

OWNER INFORMATION CHANGE

NO POSTAGENECESSARY

IF MAILEDIN THE

UNITED STATES

BUSINESS REPLY MAILFIRST CLASS MAIL PERMIT NO. 449 TORRANCE, CA 90509

POSTAGE WILL BE PAID BY ADDRESSEE

DIRECT RESPONSE DEPARTMENT A207TOYOTA MOTOR SALES USA INCPO BOX 2991TORRANCE CA 90509-9941

FPO

FPO

Page 274: Owners Manual

OWNER INFORMATION CHANGE

EVV

NAME/ADDRESS INFORMATION FORM

Check One:

Same Owner,Name and/or Address Changed

Mr. Mrs. Ms. Miss Dr.

Same Owner,Additional Driver

NewOwner

Do not include on future mailings

No Longer Have Vehicle—Sold orTraded to Individual Listed Below

Vehicle Identification Number (VIN)Effective Date ofThis Information Mo. Day Year

Individual

OR

Company:

First Name M.I. Last Name

Company Name

Address/P.O. Box

Apt./Suite Number

City

Home Telephone Number Ext.

State ZIP Code

-

- -

Social Security Number/Customer Reference

- -

Work Telephone Number Ext.

- -

Page 275: Owners Manual

OWNER INFORMATION CHANGE

NO POSTAGENECESSARY

IF MAILEDIN THE

UNITED STATES

BUSINESS REPLY MAILFIRST CLASS MAIL PERMIT NO. 449 TORRANCE, CA 90509

POSTAGE WILL BE PAID BY ADDRESSEE

DIRECT RESPONSE DEPARTMENT A207TOYOTA MOTOR SALES USA INCPO BOX 2991TORRANCE CA 90509-9941

FPO

FPO