Optoelectronics: the opportunity - optoelectronics has come of age! This perspective is reproduced from a presentation given at an inauguration mini-symposium.

Optoelectronics: the opportunity- optoelectronics has come of age!

This perspective is reproduced from a presentation given at an inauguration mini-symposium on the Optoelectronics College held in November 2007 at the Ballathie House Hotel .

Professor Wilson Sibbett, University of St Andrews

Introductory remarks

• Electronic devices are all around us but what about devices that exploit

‘optoelectronics’?

• Everyday optoelectronic technologies range from flat-screen displays (TVs,

computers, mobile phones …) through the checkout bar-scanners to internet

communications links

• A growing number of healthcare-related implementations of optoelectronics are

beginning to emerge in biology and medicine

• In Scotland, we have notable research strengths in optoelectronics and efforts are

being made to translate these into more widespread and practical applications

Basis of this overview

• Let us start with an historical perspective on optoelectronics

• Then, consider semiconductor devices as the bridge between

electronics and optoelectronics

• Starting with LEDs we proceed to lasers

• We can consider the translation of science to technology

• We can look at a few representative applications of optoelectronics

• All of this has implications for the teaching of optoelectronics

2007 marks a century of optoelectronics

• HENRY J. ROUND was a key figure in the histroy of optoelectronics. He was:

• ‘One of Marconi’s Assistants in England’ and later the Chief of Marconi

Research – he published a 24-line note in ‘Electrical World’ reporting a “bright

glow” from a carborundum diode.

• [Round, H. J., Electrical World, 49, 308 (1907)]

• Was Henry Round the discoverer of the LED? Maybe not: but most definitely he

can be credited with the discovery of electroluminescence!

• In any case, 1907 can be pinpointed as the year of birth for optical electronics

or optoelectronics!

Oleg Vladimirovich LOSEV – the short life of a genius

• We must acknowledge the early work of pioneer, Dr Oleg Losev (1903-1942)

• He was the son of a Russian Imperial Army Officer but the politics of the day denied him any career path in Bolshevik Russia!

• Sadly, he died of hunger at the age of 39 during the blockade of Leningrad!

Oleg Losev – the discoverer of the LED?• He was remarkable as self-educated scientist. His PhD degree was awarded in 1938 by the

Ioffe Institute (Leningrad) without a formal thesis because he had published 43 journal papers

and 16 patents.

• Working in a besieged Leningrad (1941), he discovered that a 3-terminal semiconductor

device could be constructed to have characteristics similar to those of a triode valve but

circumstances prevented publication! Losev had probably invented the TRANSISTOR!

• Mid-1920s: Oleg Losev observed light emission from electrically-biased zinc oxide and silicon

carbide crystal rectifier diodes – Light Emitting Diodes or LEDs!

• Called the “inverse photo-electric effect”, Losev worked out the theory of LED operation and

studied the emission spectra and even observed spectral narrowing at high drive currents –

evidence perhaps of the stimulated emission that applies to lasers?!

• Notably, the first significant blue LED re-invented in the 1990s used silicon carbide!!

Semiconductor LEDs and lasers

• LEDs are now commonplace in games consoles, remote controls, vehicle lights,

traffic lights and, increasingly, in domestic lighting

• By the end of this decade, the market value is predicted to reach $15B!

• Semiconductor lasers: the LED process is at the core of this effect and laser action

was first reported in 1962 by four US research groups (2 at GE, IBM, MIT)

• The are many everyday applications of semiconductor lasers in barcode readers,

CD & DVD players, optical-carrier sources for communications and internet data

• NB: The optical frequency for the optimum telecommunications wavelength

(~1500nm) is extremely high - equivalent to ~200 THz (i.e. 200,000,000,000,000Hz)!

Major areas of commercial growth in the optoelectronics marketplace

• Flat-panel displays: recorded sales are up 30% year on year: currently,

8% growth in Europe & USA and 9% in Japan

• Solid-state vehicle lighting: much more than just brake lights!

• Solid-state domestic lighting: replacement of incandescent lighting with

LED-based sources would reduce CO2 emissions by many millions of

tonnes worldwide!

• Power generation: solar cell technologies are progressing steadily – for

example, in Germany a new power station based on solar cells is

producing 5MW to power up 1800 households

Recent advances in LEDs for domestic lighting

By way of background:

• Incandescent lights are not efficient and have a so-called luminous

efficacy of 13-14 lumens/Watt (L/W)

• Halogen lighting is a little more efficient at 17L/W

• Fluorescent lights are significantly better with typical luminous efficacies

of 60-70L/W

More recently:

• White LEDs have achieved 100L/W and, in the laboratory, figures up to

300L/W have been reported for tailored ‘warm-white’ LED lighting!

Organic semiconductors

• We can now have organic

materials that have exploitable

semiconducting characteristics.

These feature:

• Conjugated molecules

• Novel types of semiconductors

• Easy processing schemes

• LED compatibility

• Physical flexibility

Organic light emitting diodes (OLEDs)

These diagrams illustrate the basic OLED concepts.

Examples of some OLED displays

Sony ultra-thin 13” displayKodak viewfinder

Epson widescreen display

Photo-dynamic therapy (PDT)

The ‘sensitised’ tumour region is then exposed to intense light from a source such as a laser or LED

Exposure to light induces the PP9 to produce singlet molecular oxygen that leads to local cell kill within the tumour

ALA* cream is applied to the site of the skin tumour (*5-aminolevulinic acid)

The ALA is metabolised to light-sensitive PP9 predominantly within the tumour

Before After

A typical scar-free outcome from photo-dynamic therapy or ‘PDT’ of a skin cancer

Potential of OLEDs for PDT

OLEDs have the advantages of:• Uniform illumination• Light weight – so can be worn• Relatively low intensity for longer treatment

– So reduced pain, increased effectiveness• Low cost - disposable

– Attractive for hygiene– Widens access to PDT

• A simple wearable power supply• Ambulatory treatment1

– At work– At home

1. See for example, Moseley et al, Brit.Jour.Derm., 154, 747 (2006)

Typical device application cycle

Device applied

Device worn during normal daily activities

Disposal

Skin cancer treated with OLED-based PDT

Effective treatment with reduced scarring and pain

Concept of spontaneous emission

Level 1

Energy = E1

Level 2

Energy = E2

• Consider an ‘excited’ atom

• This excited atom will relax over some characteristic relaxation time

• If photons are produced during the relaxation process this is called spontaneous emission

• This emission process is independent of external influences

Concept of stimulated emission

• An excited atom can be stimulated to emit a photon

• This process is called stimulated emission

• The stimulated photon is an exact copy of the photon that induced the transition

• A repeat of this process leads to the optical gain which represents the basis of laser action

Excited Atom

Incident Photon

Stimulated Transition Incident Photon

EmittedPhoton

• Stimulated emission provides optical gain

• Photons reflected by the resonator mirrors cause an avalanche of stimulated emission along the axis of the resonator

• A high intensity beam of light thus builds up in the laser resonator

• A collimated and directional laser beam emerges from a partially transmitting exit mirror

A laser or ‘laser oscillator’

A semiconductor diode laser chip

200nm active GaAs layer

3m p-type GaAlAs

n-type GaAlAs

~200m

• Cleaved or cleaved-and-coated facets act as the mirrors in a diode laser

• This is the preferred source for optical communications

Absorption of light by major tissue chromophores

Illumination of a hand and wrist area with light in 700nm, 800nm, 900nm spectral regions illustrates clearly the deeper penetration at the longer wavelengths into the biological tissue

Treatment of varicose veins

• The laser used produces green pulses of light for strong absorption in blood but having durations matched to the tissue thermal relaxation time.

Before After

Skin resurfacing using lasers• Laser skin resurfacing is becoming the method of choice

– preferable to chemical peels or dermabrasion

• A pulsed carbon dioxide laser is used

Before After!

We can now consider “digital optoelectronics”

• Lasers can be made to produce either:

- constant intensity beams, or

- sequences of discrete optical pulses or “optical digits”

Pulsed

Continuous

Time

Inte

nsi

ty

Why might we wish to use optical digits?

• The laser pulses or ‘optical digits’ can have very high peak intensity

• Thus, these light ‘impulses” can induce either single- photon or rather more

interesting multiple-photon interactions

• The advantage is strong near-infrared absorption (in tissue) with interactions

involving two or three photons that are equivalent to green or blue/uv light

• The average power or heating effect can be at a modest level to avoid tissue

damage

• Ultrashort pulses [picoseconds (10-12s) and femtoseconds (10-15s)] also imply short

exposure times and so we have ultrafast (or snapshot) photography

An example of a multiple-photon excitation

• This multi-photon excitation is localised both in space and in time - interactions occur primarily at the beam focus for the ultrashort light pulses

- penetration of long-wavelength light but interaction may involve 2,3 photons!

Multi-photon excitation for treatment of cancer tumours (PDT)

Photogen Inc, Knoxville Tennessee & Massachusetts Eye & Ear Infirmary

For example: Melanoma on skin in mice

The laser pulses are in the near-infrared (1047nm) but 3-photon absorption is exploited for the photo-dynamic therapy (PDT)

Prior to treatment Immediately followingtreatment

2 months aftertreatment

Snapshots in the millisecond regime[Eadweard Muybridge –Galloping Horse, 1887]

Flash photography with microsecond exposures

• The motion can be effectivelt ‘frozen’ using short pulses of light- e.g., using 1 microsecond flashes from a xenon flashbulb

An example of ‘frozen motion’! [Harold Edgerton, MIT, 1964]

Concept of prompt imaging

• An ultrashort laser pulse passing through a scattering medium carries image information via three components as illustrated

Input

diffuse

snake-like ballisticsnake-like

ballistic

diffuse Output

Seeing through raw chicken!

Photograph of two crossed metal needles

(0.5mm diameter)

The needles viewed through a 6mm slab of raw chicken breast in ordinary

illumination

‘Snapshot’ image of the needles using

femtosecond illuminating and gating pulses

Laser beam propagation in optical fibres – many-km-lengths of glass!

• Intensity– either continuous or pulsed

• Focusability– efficient coupling & propagation of laser beams in optical fibres

Many applications in endoscopy and tele/data-communications

Optical fibre

Optical fibres

Optoelectronic communications

Optoelectronic datacomms at 100Tb/s!

What data speed does this represent?

100 Tbits ~1.5x1012 words ~1.7 million x works of Shakespeare -

in one second!

High-speed data transfer - DVDs

Other information media?

100 Tbits > 600 DVD movies!!

in one second

Laserpulses

White light

Sample

Dichroicmirror

CCDcamera

Shutter

An application in biology involves the poration of cells to provide access to ‘low penetration’ drugs

Corrective eye surgery using laser pulses

Schematic of a laser-pulse produced flap:– laser pulses focused 160µm below the tissue surface to

produce micro-cavitations

– subsequent micro-machined cut to provide hinged flap

Femtosecond laser-based eye surgery

Femtosecond-laser-based Keratomileusis procedure

– Laser pulses are focused and scanned to outline with micron precision a lens-shaped block of corneal stroma or lenticule

– This lenticule is then removed and the corneal flap replaced

Optoelectronics for peace – weapons decommissioning!

• Femtosecond laser pulses cut pellets of high-explosive and metals

F Roeske Jr et al

Cut in HNS (LX-15) withfemtosecond laser pulses

Cut in PETN (LX-16) with 500ps laser pulses

KEY ADVANTAGES- this process offers a high safety status- there are no solid HE waste products- this offers decommissioning opportunities!

Concluding remarks

• Optoelectronic devices have come of age and have opened up a wide range of

exciting possibilities both within science and in the products used in everyday

life

• These are re-defining many of the boundaries of modern life and technology

• Some knowledge of optoelectronics is vital for all of us living in the 21st

century

• It follows, therefore, that the teaching of some practical skills in

optoelectronics should now form an ‘exciting’ part of a modern

science curriculum and education!